1571 files changed, 42317 insertions, 28352 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index e9c9334..180ea33 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -336,17 +336,6 @@ config HAVE_ARCH_SECCOMP_FILTER
 	    results in the system call being skipped immediately.
 	  - seccomp syscall wired up
 
-	  For best performance, an arch should use seccomp_phase1 and
-	  seccomp_phase2 directly.  It should call seccomp_phase1 for all
-	  syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not
-	  need to be called from a ptrace-safe context.  It must then
-	  call seccomp_phase2 if seccomp_phase1 returns anything other
-	  than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP.
-
-	  As an additional optimization, an arch may provide seccomp_data
-	  directly to seccomp_phase1; this avoids multiple calls
-	  to the syscall_xyz helpers for every syscall.
-
 config SECCOMP_FILTER
 	def_bool y
 	depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET
@@ -707,4 +696,38 @@ config ARCH_NO_COHERENT_DMA_MMAP
 config CPU_NO_EFFICIENT_FFS
 	def_bool n
 
+config HAVE_ARCH_VMAP_STACK
+	def_bool n
+	help
+	  An arch should select this symbol if it can support kernel stacks
+	  in vmalloc space.  This means:
+
+	  - vmalloc space must be large enough to hold many kernel stacks.
+	    This may rule out many 32-bit architectures.
+
+	  - Stacks in vmalloc space need to work reliably.  For example, if
+	    vmap page tables are created on demand, either this mechanism
+	    needs to work while the stack points to a virtual address with
+	    unpopulated page tables or arch code (switch_to() and switch_mm(),
+	    most likely) needs to ensure that the stack's page table entries
+	    are populated before running on a possibly unpopulated stack.
+
+	  - If the stack overflows into a guard page, something reasonable
+	    should happen.  The definition of "reasonable" is flexible, but
+	    instantly rebooting without logging anything would be unfriendly.
+
+config VMAP_STACK
+	default y
+	bool "Use a virtually-mapped stack"
+	depends on HAVE_ARCH_VMAP_STACK && !KASAN
+	---help---
+	  Enable this if you want the use virtually-mapped kernel stacks
+	  with guard pages.  This causes kernel stack overflows to be
+	  caught immediately rather than causing difficult-to-diagnose
+	  corruption.
+
+	  This is presently incompatible with KASAN because KASAN expects
+	  the stack to map directly to the KASAN shadow map using a formula
+	  that is incorrect if the stack is in vmalloc space.
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 7f312d8..0e49d39 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -15,7 +15,6 @@ config ALPHA
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select AUDIT_ARCH
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index c419b43..466e42e 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
 	return __cu_len;
 }
 
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
 #define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
@@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-
 extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
-	return __copy_tofrom_user((__force void *)to, from, n, to);
+	if (likely(__access_ok((unsigned long)to, n, get_fs())))
+		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+	return n;
 }
 
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
+	if (likely(__access_ok((unsigned long)from, n, get_fs())))
+		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
+	else
+		memset(to, 0, n);
+	return n;
 }
 
 extern void __do_clear_user(void);
diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index fec1947..02760f6 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -78,4 +78,9 @@
 #define MAP_HUGE_SHIFT	26
 #define MAP_HUGE_MASK	0x3f
 
+#define PKEY_DISABLE_ACCESS	0x1
+#define PKEY_DISABLE_WRITE	0x2
+#define PKEY_ACCESS_MASK	(PKEY_DISABLE_ACCESS |\
+				 PKEY_DISABLE_WRITE)
+
 #endif /* __ALPHA_MMAN_H__ */
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 647b84c..cebecfb 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -22,6 +22,7 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 0d3e59f..ecd1237 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -13,7 +13,7 @@ config ARC
 	select CLKSRC_OF
 	select CLONE_BACKWARDS
 	select COMMON_CLK
-	select GENERIC_ATOMIC64
+	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
@@ -353,8 +353,8 @@ endchoice
 
 config NODES_SHIFT
 	int "Maximum NUMA Nodes (as a power of 2)"
-	default "1" if !DISCONTIGMEM
-	default "2" if DISCONTIGMEM
+	default "0" if !DISCONTIGMEM
+	default "1" if DISCONTIGMEM
 	depends on NEED_MULTIPLE_NODES
 	---help---
 	  Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 601ed17..aa82d13 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -47,7 +47,6 @@ endif
 
 upto_gcc44    :=  $(call cc-ifversion, -le, 0404, y)
 atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)
-atleast_gcc48 :=  $(call cc-ifversion, -ge, 0408, y)
 
 cflags-$(atleast_gcc44)			+= -fsection-anchors
 
@@ -66,10 +65,8 @@ endif
 
 endif
 
-# By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok
-ifeq ($(atleast_gcc48),y)
-cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -gdwarf-2
-endif
+cfi := $(call as-instr,.cfi_startproc\n.cfi_endproc,-DARC_DW2_UNWIND_AS_CFI)
+cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index 3dd6ed9..3acf04d 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -24,6 +24,7 @@
 /include/ "abilis_tb100.dtsi"
 
 / {
+	model = "abilis,tb100";
 	chosen {
 		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
 	};
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index 1cf51c2..37d88c5 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -24,6 +24,7 @@
 /include/ "abilis_tb101.dtsi"
 
 / {
+	model = "abilis,tb101";
 	chosen {
 		bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8";
 	};
diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts
index 3f9b058..d9b9b9d 100644
--- a/arch/arc/boot/dts/axs101.dts
+++ b/arch/arc/boot/dts/axs101.dts
@@ -13,6 +13,7 @@
 /include/ "axs10x_mb.dtsi"
 
 / {
+	model = "snps,axs101";
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
diff --git a/arch/arc/boot/dts/axs103.dts b/arch/arc/boot/dts/axs103.dts
index e6d0e31..ec7fb27 100644
--- a/arch/arc/boot/dts/axs103.dts
+++ b/arch/arc/boot/dts/axs103.dts
@@ -16,6 +16,7 @@
 /include/ "axs10x_mb.dtsi"
 
 / {
+	model = "snps,axs103";
 	compatible = "snps,axs103", "snps,arc-sdp";
 
 	chosen {
diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts
index f999fef..070c297 100644
--- a/arch/arc/boot/dts/axs103_idu.dts
+++ b/arch/arc/boot/dts/axs103_idu.dts
@@ -16,6 +16,7 @@
 /include/ "axs10x_mb.dtsi"
 
 / {
+	model = "snps,axs103-smp";
 	compatible = "snps,axs103", "snps,arc-sdp";
 
 	chosen {
diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts
index 6397051..ce0ccd20 100644
--- a/arch/arc/boot/dts/nsim_700.dts
+++ b/arch/arc/boot/dts/nsim_700.dts
@@ -10,6 +10,7 @@
 /include/ "skeleton.dtsi"
 
 / {
+	model = "snps,nsim";
 	compatible = "snps,nsim";
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts
index bf05fe5..3772c40 100644
--- a/arch/arc/boot/dts/nsim_hs.dts
+++ b/arch/arc/boot/dts/nsim_hs.dts
@@ -10,6 +10,7 @@
 /include/ "skeleton_hs.dtsi"
 
 / {
+	model = "snps,nsim_hs";
 	compatible = "snps,nsim_hs";
 	#address-cells = <2>;
 	#size-cells = <2>;
diff --git a/arch/arc/boot/dts/nsim_hs_idu.dts b/arch/arc/boot/dts/nsim_hs_idu.dts
index 99eabe1..48434d7c 100644
--- a/arch/arc/boot/dts/nsim_hs_idu.dts
+++ b/arch/arc/boot/dts/nsim_hs_idu.dts
@@ -10,6 +10,7 @@
 /include/ "skeleton_hs_idu.dtsi"
 
 / {
+	model = "snps,nsim_hs-smp";
 	compatible = "snps,nsim_hs";
 	interrupt-parent = <&core_intc>;
 
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
index e659a34..bcf6031 100644
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -10,6 +10,7 @@
 /include/ "skeleton.dtsi"
 
 / {
+	model = "snps,nsimosci";
 	compatible = "snps,nsimosci";
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts
index 16ce5d6..14a727c 100644
--- a/arch/arc/boot/dts/nsimosci_hs.dts
+++ b/arch/arc/boot/dts/nsimosci_hs.dts
@@ -10,6 +10,7 @@
 /include/ "skeleton_hs.dtsi"
 
 / {
+	model = "snps,nsimosci_hs";
 	compatible = "snps,nsimosci_hs";
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts
index ce8dfbc..cbf65b6 100644
--- a/arch/arc/boot/dts/nsimosci_hs_idu.dts
+++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts
@@ -10,6 +10,7 @@
 /include/ "skeleton_hs_idu.dtsi"
 
 / {
+	model = "snps,nsimosci_hs-smp";
 	compatible = "snps,nsimosci_hs";
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arc/boot/dts/vdk_hs38.dts b/arch/arc/boot/dts/vdk_hs38.dts
index 5d803dd..3c51103 100644
--- a/arch/arc/boot/dts/vdk_hs38.dts
+++ b/arch/arc/boot/dts/vdk_hs38.dts
@@ -13,6 +13,7 @@
 /include/ "vdk_axs10x_mb.dtsi"
 
 / {
+	model = "snps,vdk_archs";
 	compatible = "snps,axs103";
 
 	chosen {
diff --git a/arch/arc/boot/dts/vdk_hs38_smp.dts b/arch/arc/boot/dts/vdk_hs38_smp.dts
index 2ba60c39..6be6800 100644
--- a/arch/arc/boot/dts/vdk_hs38_smp.dts
+++ b/arch/arc/boot/dts/vdk_hs38_smp.dts
@@ -13,6 +13,7 @@
 /include/ "vdk_axs10x_mb.dtsi"
 
 / {
+	model = "snps,vdk_archs-smp";
 	compatible = "snps,axs103";
 
 	chosen {
diff --git a/arch/arc/boot/dts/zebu_hs.dts b/arch/arc/boot/dts/zebu_hs.dts
new file mode 100644
index 0000000..1c1324e
--- /dev/null
+++ b/arch/arc/boot/dts/zebu_hs.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs.dtsi"
+
+/ {
+	model = "snps,zebu_hs";
+	compatible = "snps,zebu_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512 */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@f0000000 {
+			compatible = "ns8250";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/boot/dts/zebu_hs_idu.dts b/arch/arc/boot/dts/zebu_hs_idu.dts
new file mode 100644
index 0000000..65204b4
--- /dev/null
+++ b/arch/arc/boot/dts/zebu_hs_idu.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "skeleton_hs_idu.dtsi"
+
+/ {
+	model = "snps,zebu_hs-smp";
+	compatible = "snps,zebu_hs";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&core_intc>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;	/* 512 */
+	};
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	fpga {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* child and parent address space 1:1 mapped */
+		ranges;
+
+		core_clk: core_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;	/* 50 MHZ */
+		};
+
+		core_intc: interrupt-controller {
+			compatible = "snps,archs-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+/*			interrupts = <16 17 18 19 20 21 22 23 24 25>; */
+		};
+
+		idu_intc: idu-interrupt-controller {
+			compatible = "snps,archs-idu-intc";
+			interrupt-controller;
+			interrupt-parent = <&core_intc>;
+			/* <hwirq  distribution>
+			distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 */
+			#interrupt-cells = <2>;
+			interrupts = <24 25 26 27 28 29 30 31>;
+
+		};
+
+		uart0: serial@f0000000 {
+			/* compatible = "ns8250"; Doesn't use FIFOs */
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupt-parent = <&idu_intc>;
+			/* interrupts = <0 1>;  DEST=1*/
+			/* interrupts = <0 2>;  DEST=2*/
+			interrupts = <0 0>;  /* RR*/
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
+		};
+
+		arcpct0: pct {
+			compatible = "snps,archs-pct";
+			#interrupt-cells = <1>;
+			interrupts = <20>;
+		};
+	};
+};
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 6cdffea..0a0eaf0 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -18,6 +18,9 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS101=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 491b3b5..2233f57 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -18,6 +18,9 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index b25ee73..1108747 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -18,6 +18,9 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
index a99dc7a..65ab9fb 100644
--- a/arch/arc/configs/nsim_hs_defconfig
+++ b/arch/arc/configs/nsim_hs_defconfig
@@ -11,13 +11,16 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
+CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
index 59f221f..3b3990c 100644
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ b/arch/arc/configs/nsim_hs_smp_defconfig
@@ -16,6 +16,9 @@ CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
diff --git a/arch/arc/configs/zebu_hs_defconfig b/arch/arc/configs/zebu_hs_defconfig
new file mode 100644
index 0000000..9f6166b
--- /dev/null
+++ b/arch/arc/configs/zebu_hs_defconfig
@@ -0,0 +1,86 @@
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_SIM=y
+CONFIG_ISA_ARCV2=y
+CONFIG_ARC_BUILTIN_DTB_NAME="zebu_hs"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/zebu_hs_smp_defconfig b/arch/arc/configs/zebu_hs_smp_defconfig
new file mode 100644
index 0000000..44e9693
--- /dev/null
+++ b/arch/arc/configs/zebu_hs_smp_defconfig
@@ -0,0 +1,89 @@
+CONFIG_DEFAULT_HOSTNAME="ARCLinux"
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARC_PLAT_SIM=y
+CONFIG_ISA_ARCV2=y
+CONFIG_SMP=y
+CONFIG_ARC_BUILTIN_DTB_NAME="zebu_hs_idu"
+CONFIG_PREEMPT=y
+# CONFIG_COMPACTION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_MOUSE_PS2_TOUCHKIT=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_ARC_PS2=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 0b10ef2..c332604 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -25,6 +25,7 @@ generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += mman.h
 generic-y += msgbuf.h
+generic-y += msi.h
 generic-y += param.h
 generic-y += parport.h
 generic-y += pci.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 7fbaea0..db25c65 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -95,7 +95,7 @@
 /* Auxiliary registers */
 #define AUX_IDENTITY		4
 #define AUX_INTR_VEC_BASE	0x25
-#define AUX_NON_VOL		0x5e
+#define AUX_VOL			0x5e
 
 /*
  * Floating Pt Registers
@@ -240,14 +240,6 @@ struct bcr_extn_xymem {
 #endif
 };
 
-struct bcr_perip {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int start:8, pad2:8, sz:8, ver:8;
-#else
-	unsigned int ver:8, sz:8, pad2:8, start:8;
-#endif
-};
-
 struct bcr_iccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int base:16, pad:5, sz:3, ver:8;
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 4e3c1b6..b65930a 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -20,6 +20,7 @@
 #ifndef CONFIG_ARC_PLAT_EZNPS
 
 #define atomic_read(v)  READ_ONCE((v)->counter)
+#define ATOMIC_INIT(i)	{ (i) }
 
 #ifdef CONFIG_ARC_HAS_LLSC
 
@@ -284,6 +285,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3)
 #define atomic_sub(i, v) atomic_add(-(i), (v))
 #define atomic_sub_return(i, v) atomic_add_return(-(i), (v))
+#define atomic_fetch_sub(i, v) atomic_fetch_add(-(i), (v))
 
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, c_op, asm_op)					\
@@ -292,6 +294,7 @@ ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3)
 
 ATOMIC_OPS(and, &=, CTOP_INST_AAND_DI_R2_R2_R3)
 #define atomic_andnot(mask, v) atomic_and(~(mask), (v))
+#define atomic_fetch_andnot(mask, v) atomic_fetch_and(~(mask), (v))
 ATOMIC_OPS(or, |=, CTOP_INST_AOR_DI_R2_R2_R3)
 ATOMIC_OPS(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3)
 
@@ -343,10 +346,266 @@ ATOMIC_OPS(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3)
 
 #define atomic_add_negative(i, v)	(atomic_add_return(i, v) < 0)
 
-#define ATOMIC_INIT(i)			{ (i) }
+
+#ifdef CONFIG_GENERIC_ATOMIC64
 
 #include <asm-generic/atomic64.h>
 
-#endif
+#else	/* Kconfig ensures this is only enabled with needed h/w assist */
+
+/*
+ * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
+ *  - The address HAS to be 64-bit aligned
+ *  - There are 2 semantics involved here:
+ *    = exclusive implies no interim update between load/store to same addr
+ *    = both words are observed/updated together: this is guaranteed even
+ *      for regular 64-bit load (LDD) / store (STD). Thus atomic64_set()
+ *      is NOT required to use LLOCKD+SCONDD, STD suffices
+ */
+
+typedef struct {
+	aligned_u64 counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(a) { (a) }
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+	unsigned long long val;
+
+	__asm__ __volatile__(
+	"	ldd   %0, [%1]	\n"
+	: "=r"(val)
+	: "r"(&v->counter));
+
+	return val;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long a)
+{
+	/*
+	 * This could have been a simple assignment in "C" but would need
+	 * explicit volatile. Otherwise gcc optimizers could elide the store
+	 * which borked atomic64 self-test
+	 * In the inline asm version, memory clobber needed for exact same
+	 * reason, to tell gcc about the store.
+	 *
+	 * This however is not needed for sibling atomic64_add() etc since both
+	 * load/store are explicitly done in inline asm. As long as API is used
+	 * for each access, gcc has no way to optimize away any load/store
+	 */
+	__asm__ __volatile__(
+	"	std   %0, [%1]	\n"
+	:
+	: "r"(a), "r"(&v->counter)
+	: "memory");
+}
+
+#define ATOMIC64_OP(op, op1, op2)					\
+static inline void atomic64_##op(long long a, atomic64_t *v)		\
+{									\
+	unsigned long long val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd  %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(val)							\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");						\
+}									\
+
+#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
+static inline long long atomic64_##op##_return(long long a, atomic64_t *v)	\
+{									\
+	unsigned long long val;						\
+									\
+	smp_mb();							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: [val] "=&r"(val)						\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");	/* memory clobber comes from smp_mb() */	\
+									\
+	smp_mb();							\
+									\
+	return val;							\
+}
+
+#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
+static inline long long atomic64_fetch_##op(long long a, atomic64_t *v)	\
+{									\
+	unsigned long long val, orig;					\
+									\
+	smp_mb();							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%2]	\n"				\
+	"	" #op1 " %L1, %L0, %L3	\n"				\
+	"	" #op2 " %H1, %H0, %H3	\n"				\
+	"	scondd   %1, [%2]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(orig), "=&r"(val)					\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");	/* memory clobber comes from smp_mb() */	\
+									\
+	smp_mb();							\
+									\
+	return orig;							\
+}
+
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_OP_RETURN(op, op1, op2)				\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+#define atomic64_andnot atomic64_andnot
+
+ATOMIC64_OPS(add, add.f, adc)
+ATOMIC64_OPS(sub, sub.f, sbc)
+ATOMIC64_OPS(and, and, and)
+ATOMIC64_OPS(andnot, bic, bic)
+ATOMIC64_OPS(or, or, or)
+ATOMIC64_OPS(xor, xor, xor)
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_OP_RETURN
+#undef ATOMIC64_OP
+
+static inline long long
+atomic64_cmpxchg(atomic64_t *ptr, long long expected, long long new)
+{
+	long long prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	brne    %L0, %L2, 2f	\n"
+	"	brne    %H0, %H2, 2f	\n"
+	"	scondd  %3, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "ir"(expected), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+static inline long long atomic64_xchg(atomic64_t *ptr, long long new)
+{
+	long long prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	scondd  %2, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+/**
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+
+static inline long long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long long val;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
+	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
+	"	brlt    %H0, 0, 2f	\n"
+	"	scondd  %0, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(val)
+	: "r"(&v->counter)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return val;
+}
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * if (v != u) { v += a; ret = 1} else {ret = 0}
+ * Returns 1 iff @v was not @u (i.e. if add actually happened)
+ */
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
+{
+	long long val;
+	int op_done;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%2]	\n"
+	"	mov	%1, 1		\n"
+	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
+	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
+	"	mov	%1, 0		\n"
+	"2:				\n"
+	"	add.f   %L0, %L0, %L3	\n"
+	"	adc     %H0, %H0, %H3	\n"
+	"	scondd  %0, [%2]	\n"
+	"	bnz     1b		\n"
+	"3:				\n"
+	: "=&r"(val), "=&r" (op_done)
+	: "r"(&v->counter), "r"(a), "r"(u)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return op_done;
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v)	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1LL, 0LL)
+
+#endif	/* !CONFIG_GENERIC_ATOMIC64 */
+
+#endif	/* !__ASSEMBLY__ */
 
 #endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 23706c6..fb781e3 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -54,7 +54,7 @@ extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
 extern void read_decode_cache_bcr(void);
 
 extern int ioc_exists;
-extern unsigned long perip_base;
+extern unsigned long perip_base, perip_end;
 
 #endif	/* !__ASSEMBLY__ */
 
diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h
new file mode 100644
index 0000000..bb7bdbc
--- /dev/null
+++ b/arch/arc/include/asm/dwarf.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_DWARF_H
+#define _ASM_ARC_DWARF_H
+
+#ifdef __ASSEMBLY__
+
+#ifdef ARC_DW2_UNWIND_AS_CFI
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
+
+#else
+
+#define CFI_IGNORE	#
+
+#define CFI_STARTPROC	CFI_IGNORE
+#define CFI_ENDPROC	CFI_IGNORE
+#define CFI_DEF_CFA	CFI_IGNORE
+#define CFI_REGISTER	CFI_IGNORE
+#define CFI_REL_OFFSET	CFI_IGNORE
+#define CFI_UNDEFINED	CFI_IGNORE
+
+#endif	/* !ARC_DW2_UNWIND_AS_CFI */
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_ARC_DWARF_H */
diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h
index 51a99e2..7096f97 100644
--- a/arch/arc/include/asm/elf.h
+++ b/arch/arc/include/asm/elf.h
@@ -23,8 +23,7 @@
 /* ARC Relocations (kernel Modules only) */
 #define  R_ARC_32		0x4
 #define  R_ARC_32_ME		0x1B
-#define  R_ARC_S25H_PCREL	0x10
-#define  R_ARC_S25W_PCREL	0x11
+#define  R_ARC_32_PCREL		0x31
 
 /*to set parameters in the core dumps */
 #define ELF_ARCH		EM_ARCOMPACT
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index d1ec7f6..e880dfa 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -112,7 +112,7 @@ static inline long arch_local_save_flags(void)
 	 */
 	temp = (1 << 5) |
 		((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) |
-		(temp & CLRI_STATUS_E_MASK);
+		((temp >> 1) & CLRI_STATUS_E_MASK);
 	return temp;
 }
 
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index 5faad17..b29f1a9 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
+#include <asm/dwarf.h>
+
 #ifdef __ASSEMBLY__
 
 #define ASM_NL		 `	/* use '`' to mark new line in macro */
@@ -32,6 +34,16 @@
 #endif
 .endm
 
+#define ENTRY_CFI(name)		\
+	.globl name ASM_NL	\
+	ALIGN ASM_NL 		\
+	name: ASM_NL		\
+	CFI_STARTPROC ASM_NL
+
+#define END_CFI(name) 		\
+	CFI_ENDPROC ASM_NL	\
+	.size name, .-name
+
 #else	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
index 5f07176..9185541 100644
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@@ -118,6 +118,9 @@ static const char * const arc_pmu_ev_hw_map[] = {
 	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
 	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
 	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
+
+	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
 };
 
 #define C(_x)			PERF_COUNT_HW_CACHE_##_x
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index a78d567..41faf17 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -83,7 +83,10 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -101,7 +104,11 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index e6890b1..7c1f365 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -23,6 +23,7 @@
 	.global __switch_to
 	.type   __switch_to, @function
 __switch_to:
+	CFI_STARTPROC
 
 	/* Save regs on kernel mode stack of task */
 	st.a    blink, [sp, -4]
@@ -59,4 +60,4 @@ __switch_to:
 	ld.ab   blink, [sp, 4]
 	j       [blink]
 
-END(__switch_to)
+END_CFI(__switch_to)
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 2efb0625..1eea99b 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -35,7 +35,7 @@ ENTRY(sys_clone_wrapper)
 	btst r10, TIF_SYSCALL_TRACE
 	bnz  tracesys_exit
 
-	b ret_from_system_call
+	b .Lret_from_system_call
 END(sys_clone_wrapper)
 
 ENTRY(ret_from_fork)
@@ -61,18 +61,6 @@ ENTRY(ret_from_fork)
 	b    ret_from_exception
 END(ret_from_fork)
 
-#ifdef CONFIG_ARC_DW2_UNWIND
-; Workaround for bug 94179 (STAR ):
-; Despite -fasynchronous-unwind-tables, linker is not making dwarf2 unwinder
-; section (.debug_frame) as loadable. So we force it here.
-; This also fixes STAR 9000487933 where the prev-workaround (objcopy --setflag)
-; would not work after a clean build due to kernel build system dependencies.
-.section .debug_frame, "wa",@progbits
-
-; Reset to .text as this file is included in entry-<isa>.S
-.section .text, "ax",@progbits
-#endif
-
 ;################### Non TLB Exception Handling #############################
 
 ; ---------------------------------------------
@@ -260,20 +248,18 @@ ENTRY(EV_Trap)
 	; syscall num shd not exceed the total system calls avail
 	cmp     r8,  NR_syscalls
 	mov.hi  r0, -ENOSYS
-	bhi     ret_from_system_call
+	bhi     .Lret_from_system_call
 
 	; Offset into the syscall_table and call handler
 	ld.as   r9,[sys_call_table, r8]
 	jl      [r9]        ; Entry into Sys Call Handler
 
-	; fall through to ret_from_system_call
-END(EV_Trap)
-
-ENTRY(ret_from_system_call)
+.Lret_from_system_call:
 
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
-	; fall through yet again to ret_from_exception
+	; fall through to ret_from_exception
+END(EV_Trap)
 
 ;############# Return from Intr/Excp/Trap (Linux Specifics) ##############
 ;
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 6c24faf..62b59409 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -74,7 +74,7 @@ void arc_init_IRQ(void)
 	tmp = read_aux_reg(0xa);
 	tmp |= STATUS_AD_MASK | (irq_prio << 1);
 	tmp &= ~STATUS_IE_MASK;
-	asm volatile("flag %0	\n"::"r"(tmp));
+	asm volatile("kflag %0	\n"::"r"(tmp));
 }
 
 static void arcv2_irq_mask(struct irq_data *data)
diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c
index 376e046..9a28497 100644
--- a/arch/arc/kernel/module.c
+++ b/arch/arc/kernel/module.c
@@ -22,13 +22,9 @@ static inline void arc_write_me(unsigned short *addr, unsigned long value)
 	*(addr + 1) = (value & 0xffff);
 }
 
-/* ARC specific section quirks - before relocation loop in generic loader
- *
- * For dwarf unwinding out of modules, this needs to
- * 1. Ensure the .debug_frame is allocatable (ARC Linker bug: despite
- *    -fasynchronous-unwind-tables it doesn't).
- * 2. Since we are iterating thru sec hdr tbl anyways, make a note of
- *    the exact section index, for later use.
+/*
+ * This gets called before relocation loop in generic loader
+ * Make a note of the section index of unwinding section
  */
 int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 			      char *secstr, struct module *mod)
@@ -40,8 +36,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 	mod->arch.unw_info = NULL;
 
 	for (i = 1; i < hdr->e_shnum; i++) {
-		if (strcmp(secstr+sechdrs[i].sh_name, ".debug_frame") == 0) {
-			sechdrs[i].sh_flags |= SHF_ALLOC;
+		if (strcmp(secstr+sechdrs[i].sh_name, ".eh_frame") == 0) {
 			mod->arch.unw_sec_idx = i;
 			break;
 		}
@@ -106,10 +101,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 		 */
 		relo_type = ELF32_R_TYPE(rel_entry[i].r_info);
 
-		if (likely(R_ARC_32_ME == relo_type))
+		if (likely(R_ARC_32_ME == relo_type))	/* ME ( S + A ) */
 			arc_write_me((unsigned short *)location, relocation);
-		else if (R_ARC_32 == relo_type)
+		else if (R_ARC_32 == relo_type)		/* ( S + A ) */
 			*((Elf32_Addr *) location) = relocation;
+		else if (R_ARC_32_PCREL == relo_type)	/* ( S + A ) - PDATA ) */
+			*((Elf32_Addr *) location) = relocation - location;
 		else
 			goto relo_err;
 
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 08f03d9..2ce24e7 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -179,8 +179,8 @@ static int arc_pmu_event_init(struct perf_event *event)
 		if (arc_pmu->ev_hw_idx[event->attr.config] < 0)
 			return -ENOENT;
 		hwc->config |= arc_pmu->ev_hw_idx[event->attr.config];
-		pr_debug("init event %d with h/w %d \'%s\'\n",
-			 (int) event->attr.config, (int) hwc->config,
+		pr_debug("init event %d with h/w %08x \'%s\'\n",
+			 (int)event->attr.config, (int)hwc->config,
 			 arc_pmu_ev_hw_map[event->attr.config]);
 		return 0;
 
@@ -189,6 +189,8 @@ static int arc_pmu_event_init(struct perf_event *event)
 		if (ret < 0)
 			return ret;
 		hwc->config |= arc_pmu->ev_hw_idx[ret];
+		pr_debug("init cache event with h/w %08x \'%s\'\n",
+			 (int)hwc->config, arc_pmu_ev_hw_map[ret]);
 		return 0;
 	default:
 		return -ENOENT;
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index f52a0d0d..3df7f9c 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -171,6 +171,7 @@ static const struct cpuinfo_data arc_cpu_tbl[] = {
 #else
 	{ {0x50, "ARC HS38 R2.0"}, 0x51},
 	{ {0x52, "ARC HS38 R2.1"}, 0x52},
+	{ {0x53, "ARC HS38 R3.0"}, 0x53},
 #endif
 	{ {0x00, NULL		} }
 };
@@ -272,8 +273,8 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 	FIX_PTR(cpu);
 
 	n += scnprintf(buf + n, len - n,
-		       "Vector Table\t: %#x\nUncached Base\t: %#lx\n",
-		       cpu->vec_base, perip_base);
+		       "Vector Table\t: %#x\nPeripherals\t: %#lx:%#lx\n",
+		       cpu->vec_base, perip_base, perip_end);
 
 	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
 		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 0587bf1..61fd1ce 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -111,6 +111,8 @@ UNW_REGISTER_INFO};
 #define DW_EH_PE_indirect 0x80
 #define DW_EH_PE_omit     0xff
 
+#define CIE_ID	0
+
 typedef unsigned long uleb128_t;
 typedef signed long sleb128_t;
 
@@ -232,6 +234,7 @@ void __init arc_unwind_init(void)
 
 static const u32 bad_cie, not_fde;
 static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *);
+static const u32 *__cie_for_fde(const u32 *fde);
 static signed fde_pointer_type(const u32 *cie);
 
 struct eh_frame_hdr_table_entry {
@@ -338,10 +341,9 @@ static void init_unwind_hdr(struct unwind_table *table,
 	for (fde = table->address, tableSize = table->size, n = 0;
 	     tableSize;
 	     tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) {
-		/* const u32 *cie = fde + 1 - fde[1] / sizeof(*fde); */
-		const u32 *cie = (const u32 *)(fde[1]);
+		const u32 *cie = __cie_for_fde(fde);
 
-		if (fde[1] == 0xffffffff)
+		if (fde[1] == CIE_ID)
 			continue;	/* this is a CIE */
 		ptr = (const u8 *)(fde + 2);
 		header->table[n].start = read_pointer(&ptr,
@@ -504,6 +506,15 @@ static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
 	return value;
 }
 
+static const u32 *__cie_for_fde(const u32 *fde)
+{
+	const u32 *cie;
+
+	cie = fde + 1 - fde[1] / sizeof(*fde);
+
+	return cie;
+}
+
 static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table)
 {
 	const u32 *cie;
@@ -511,19 +522,18 @@ static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table)
 	if (!*fde || (*fde & (sizeof(*fde) - 1)))
 		return &bad_cie;
 
-	if (fde[1] == 0xffffffff)
+	if (fde[1] == CIE_ID)
 		return &not_fde;	/* this is a CIE */
 
 	if ((fde[1] & (sizeof(*fde) - 1)))
 /* || fde[1] > (unsigned long)(fde + 1) - (unsigned long)table->address) */
 		return NULL;	/* this is not a valid FDE */
 
-	/* cie = fde + 1 - fde[1] / sizeof(*fde); */
-	cie = (u32 *) fde[1];
+	cie = __cie_for_fde(fde);
 
 	if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde)
 	    || (*cie & (sizeof(*cie) - 1))
-	    || (cie[1] != 0xffffffff))
+	    || (cie[1] != CIE_ID))
 		return NULL;	/* this is not a (valid) CIE */
 	return cie;
 }
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 894e696..f35ed57 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -82,14 +82,6 @@ SECTIONS
 
 	PERCPU_SECTION(L1_CACHE_BYTES)
 
-	/*
-	 * .exit.text is discard at runtime, not link time, to deal with
-	 * references from .debug_frame
-	 * It will be init freed, being inside [__init_start : __init_end]
-	 */
-	.exit.text : { EXIT_TEXT }
-	.exit.data : { EXIT_DATA }
-
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 
@@ -97,6 +89,7 @@ SECTIONS
 		_text = .;
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		*(.fixup)
@@ -120,18 +113,13 @@ SECTIONS
 
 #ifdef CONFIG_ARC_DW2_UNWIND
 	. = ALIGN(PAGE_SIZE);
-	.debug_frame  : {
+	.eh_frame  : {
 		__start_unwind = .;
-		*(.debug_frame)
+		*(.eh_frame)
 		__end_unwind = .;
 	}
-	/*
-	 * gcc 4.8 generates this for -fasynchonous-unwind-tables,
-	 * while we still use the .debug_frame based unwinder
-	 */
-	/DISCARD/ : {	*(.eh_frame) }
 #else
-	/DISCARD/ : {	*(.debug_frame) }
+	/DISCARD/ : {	*(.eh_frame) }
 #endif
 
 	NOTES
@@ -148,7 +136,7 @@ SECTIONS
 	}
 
 #ifndef CONFIG_DEBUG_INFO
-	/* open-coded because we need .debug_frame seperately for unwinding */
+	/DISCARD/ : { *(.debug_frame) }
 	/DISCARD/ : { *(.debug_aranges) }
 	/DISCARD/ : { *(.debug_pubnames) }
 	/DISCARD/ : { *(.debug_info) }
diff --git a/arch/arc/lib/memcmp.S b/arch/arc/lib/memcmp.S
index a4015e7..21a1030 100644
--- a/arch/arc/lib/memcmp.S
+++ b/arch/arc/lib/memcmp.S
@@ -16,7 +16,7 @@
 #define SHIFT r2
 #endif
 
-ENTRY(memcmp)
+ENTRY_CFI(memcmp)
 	or	r12,r0,r1
 	asl_s	r12,r12,30
 	sub	r3,r2,1
@@ -149,4 +149,4 @@ ENTRY(memcmp)
 .Lnil:
 	j_s.d	[blink]
 	mov	r0,0
-END(memcmp)
+END_CFI(memcmp)
diff --git a/arch/arc/lib/memcpy-700.S b/arch/arc/lib/memcpy-700.S
index 3222573..ba0becc 100644
--- a/arch/arc/lib/memcpy-700.S
+++ b/arch/arc/lib/memcpy-700.S
@@ -8,7 +8,7 @@
 
 #include <linux/linkage.h>
 
-ENTRY(memcpy)
+ENTRY_CFI(memcpy)
 	or	r3,r0,r1
 	asl_s	r3,r3,30
 	mov_s	r5,r0
@@ -63,4 +63,4 @@ ENTRY(memcpy)
 .Lendbloop:
 	j_s.d	[blink]
 	stb	r12,[r5,0]
-END(memcpy)
+END_CFI(memcpy)
diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S
index f96c75e..d61044d 100644
--- a/arch/arc/lib/memcpy-archs.S
+++ b/arch/arc/lib/memcpy-archs.S
@@ -40,7 +40,7 @@
 # define ZOLAND			0xF
 #endif
 
-ENTRY(memcpy)
+ENTRY_CFI(memcpy)
 	prefetch [r1]		; Prefetch the read location
 	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
@@ -233,4 +233,4 @@ ENTRY(memcpy)
 .Lcopybytewise_3:
 	j	[blink]
 
-END(memcpy)
+END_CFI(memcpy)
diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S
index 365b183..62ad4bc 100644
--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@@ -10,7 +10,7 @@
 
 #undef PREALLOC_NOT_AVAIL
 
-ENTRY(memset)
+ENTRY_CFI(memset)
 	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
 ;;; if size is zero
@@ -112,11 +112,11 @@ ENTRY(memset)
 
 	j	[blink]
 
-END(memset)
+END_CFI(memset)
 
-ENTRY(memzero)
+ENTRY_CFI(memzero)
     ; adjust bzero args to memset args
     mov r2, r1
     b.d  memset    ;tail call so need to tinker with blink
     mov r1, 0
-END(memzero)
+END_CFI(memzero)
diff --git a/arch/arc/lib/memset.S b/arch/arc/lib/memset.S
index d36bd43..cf736f9 100644
--- a/arch/arc/lib/memset.S
+++ b/arch/arc/lib/memset.S
@@ -10,7 +10,7 @@
 
 #define SMALL	7 /* Must be at least 6 to deal with alignment/loop issues.  */
 
-ENTRY(memset)
+ENTRY_CFI(memset)
 	mov_s	r4,r0
 	or	r12,r0,r2
 	bmsk.f	r12,r12,1
@@ -46,14 +46,14 @@ ENTRY(memset)
 	stb.ab	r1,[r4,1]
 .Ltiny_end:
 	j_s	[blink]
-END(memset)
+END_CFI(memset)
 
 ; memzero: @r0 = mem, @r1 = size_t
 ; memset:  @r0 = mem, @r1 = char, @r2 = size_t
 
-ENTRY(memzero)
+ENTRY_CFI(memzero)
     ; adjust bzero args to memset args
     mov r2, r1
     mov r1, 0
     b  memset    ;tail call so need to tinker with blink
-END(memzero)
+END_CFI(memzero)
diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S
index b725d58..2d300da 100644
--- a/arch/arc/lib/strchr-700.S
+++ b/arch/arc/lib/strchr-700.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 
-ENTRY(strchr)
+ENTRY_CFI(strchr)
 	extb_s	r1,r1
 	asl	r5,r1,8
 	bmsk	r2,r0,1
@@ -130,4 +130,4 @@ ENTRY(strchr)
 	j_s.d	[blink]
 	mov.mi	r0,0
 #endif /* ENDIAN */
-END(strchr)
+END_CFI(strchr)
diff --git a/arch/arc/lib/strcmp-archs.S b/arch/arc/lib/strcmp-archs.S
index 4f338ee..fae9e82 100644
--- a/arch/arc/lib/strcmp-archs.S
+++ b/arch/arc/lib/strcmp-archs.S
@@ -8,7 +8,7 @@
 
 #include <linux/linkage.h>
 
-ENTRY(strcmp)
+ENTRY_CFI(strcmp)
 	or	r2, r0, r1
 	bmsk_s	r2, r2, 1
 	brne	r2, 0, @.Lcharloop
@@ -75,4 +75,4 @@ ENTRY(strcmp)
 .Lcmpend:
 	j_s.d	[blink]
 	sub	r0, r2, r3
-END(strcmp)
+END_CFI(strcmp)
diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S
index 3544600..fb20096 100644
--- a/arch/arc/lib/strcmp.S
+++ b/arch/arc/lib/strcmp.S
@@ -15,7 +15,7 @@
 
 #include <linux/linkage.h>
 
-ENTRY(strcmp)
+ENTRY_CFI(strcmp)
 	or	r2,r0,r1
 	bmsk_s	r2,r2,1
 	brne	r2,0,.Lcharloop
@@ -93,4 +93,4 @@ ENTRY(strcmp)
 .Lcmpend:
 	j_s.d	[blink]
 	sub	r0,r2,r3
-END(strcmp)
+END_CFI(strcmp)
diff --git a/arch/arc/lib/strcpy-700.S b/arch/arc/lib/strcpy-700.S
index 8422f38..6a6c155 100644
--- a/arch/arc/lib/strcpy-700.S
+++ b/arch/arc/lib/strcpy-700.S
@@ -18,7 +18,7 @@
 
 #include <linux/linkage.h>
 
-ENTRY(strcpy)
+ENTRY_CFI(strcpy)
 	or	r2,r0,r1
 	bmsk_s	r2,r2,1
 	brne.d	r2,0,charloop
@@ -67,4 +67,4 @@ charloop:
 	brne.d	r3,0,charloop
 	stb.ab	r3,[r10,1]
 	j	[blink]
-END(strcpy)
+END_CFI(strcpy)
diff --git a/arch/arc/lib/strlen.S b/arch/arc/lib/strlen.S
index 53cfd56..839b44b 100644
--- a/arch/arc/lib/strlen.S
+++ b/arch/arc/lib/strlen.S
@@ -8,7 +8,7 @@
 
 #include <linux/linkage.h>
 
-ENTRY(strlen)
+ENTRY_CFI(strlen)
 	or	r3,r0,7
 	ld	r2,[r3,-7]
 	ld.a	r6,[r3,-3]
@@ -80,4 +80,4 @@ ENTRY(strlen)
 .Learly_end:
 	b.d	.Lend
 	sub_s.ne r1,r1,r1
-END(strlen)
+END_CFI(strlen)
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 0b10efe..97dddbe 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -25,6 +25,7 @@ static int l2_line_sz;
 int ioc_exists;
 volatile int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
+unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
 void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
 			       unsigned long sz, const int cacheop);
@@ -76,7 +77,6 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
 static void read_decode_cache_bcr_arcv2(int cpu)
 {
 	struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
-	struct bcr_generic uncached_space;
 	struct bcr_generic sbcr;
 
 	struct bcr_slc_cfg {
@@ -95,6 +95,15 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 #endif
 	} cbcr;
 
+	struct bcr_volatile {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int start:4, limit:4, pad:22, order:1, disable:1;
+#else
+		unsigned int disable:1, order:1, pad:22, limit:4, start:4;
+#endif
+	} vol;
+
+
 	READ_BCR(ARC_REG_SLC_BCR, sbcr);
 	if (sbcr.ver) {
 		READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
@@ -107,10 +116,14 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 	if (cbcr.c && ioc_enable)
 		ioc_exists = 1;
 
-	/* Legacy Data Uncached BCR is deprecated from v3 onwards */
-	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
-	if (uncached_space.ver > 2)
-		perip_base = read_aux_reg(AUX_NON_VOL) & 0xF0000000;
+	/* HS 2.0 didn't have AUX_VOL */
+	if (cpuinfo_arc700[cpu].core.family > 0x51) {
+		READ_BCR(AUX_VOL, vol);
+		perip_base = vol.start << 28;
+		/* HS 3.0 has limit and strict-ordering fields */
+		if (cpuinfo_arc700[cpu].core.family > 0x52)
+			perip_end = (vol.limit << 28) - 1;
+	}
 }
 
 void read_decode_cache_bcr(void)
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index f52b7db6..9881bd7 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -19,7 +19,7 @@ static inline bool arc_uncached_addr_space(phys_addr_t paddr)
 	if (is_isa_arcompact()) {
 		if (paddr >= ARC_UNCACHED_ADDR_SPACE)
 			return true;
-	} else if (paddr >= perip_base && paddr <= 0xFFFFFFFF) {
+	} else if (paddr >= perip_base && paddr <= perip_end) {
 		return true;
 	}
 
diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c
index e4fe514..aea8738 100644
--- a/arch/arc/plat-sim/platform.c
+++ b/arch/arc/plat-sim/platform.c
@@ -24,6 +24,7 @@ static const char *simulation_compat[] __initconst = {
 	"snps,nsim_hs",
 	"snps,nsimosci",
 	"snps,nsimosci_hs",
+	"snps,zebu_hs",
 	NULL,
 };
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a9c4e48..b5d529f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,7 +1,7 @@
 config ARM
 	bool
 	default y
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_CLOCKSOURCE_DATA
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
@@ -278,10 +278,9 @@ config PHYS_OFFSET
 			ARCH_INTEGRATOR || \
 			ARCH_IOP13XX || \
 			ARCH_KS8695 || \
-			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+			ARCH_REALVIEW
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x20000000 if ARCH_S5PV210
-	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
 	default 0xc0000000 if ARCH_SA1100
 	help
 	  Please provide the physical address corresponding to the
@@ -337,6 +336,7 @@ config ARCH_MULTIPLATFORM
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select MULTI_IRQ_HANDLER
+	select PCI_DOMAINS if PCI
 	select SPARSE_IRQ
 	select USE_OF
 
@@ -878,6 +878,7 @@ config ARCH_STM32
 	select CLKSRC_STM32
 	select PINCTRL
 	select RESET_CONTROLLER
+	select STM32_EXTI
 	help
 	  Support for STMicroelectronics STM32 processors.
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a9693b6..d83f7c3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -186,10 +186,11 @@ choice
 	config DEBUG_BRCMSTB_UART
 		bool "Use BRCMSTB UART for low-level debug"
 		depends on ARCH_BRCMSTB
-		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on these devices.
+		  their output to the first serial port on these devices. The
+		  UART physical and virtual address is automatically provided
+		  based on the chip identification register value.
 
 		  If you have a Broadcom STB chip and would like early print
 		  messages to appear over the UART, select this option.
@@ -861,12 +862,12 @@ choice
 		  via SCIF2 on Renesas R-Car H1 (R8A7779).
 
 	config DEBUG_RCAR_GEN2_SCIF0
-		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
-		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7792/R8A7793"
+		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
-		  M2-N (R8A7793).
+		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), V2H
+		  (R8A7792), or M2-N (R8A7793).
 
 	config DEBUG_RCAR_GEN2_SCIF2
 		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
@@ -1430,6 +1431,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
 	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
@@ -1520,7 +1522,6 @@ config DEBUG_UART_PHYS
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2
 	default 0xf0000be0 if ARCH_EBSA110
-	default 0xf040ab00 if DEBUG_BRCMSTB_UART
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1604,7 +1605,6 @@ config DEBUG_UART_VIRT
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
-	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
@@ -1677,8 +1677,7 @@ config DEBUG_UART_8250_WORD
 		DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
-		DEBUG_BRCMSTB_UART
+		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1697,7 +1696,8 @@ config DEBUG_UNCOMPRESS
 	bool
 	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
-		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
+		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+		     !DEBUG_BRCMSTB_UART
 	help
 	  This option influences the normal decompressor output for
 	  multiplatform kernels.  Normally, multiplatform kernels disable
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 61f6ccc..6be9ee1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -23,7 +23,6 @@ ifeq ($(CONFIG_ARM_MODULE_PLTS),y)
 LDFLAGS_MODULE	+= -T $(srctree)/arch/arm/kernel/module.lds
 endif
 
-OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index bdc1d5a..50f8d1b 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -11,6 +11,8 @@
 # Copyright (C) 1995-2002 Russell King
 #
 
+OBJCOPYFLAGS	:=-O binary -R .comment -S
+
 ifneq ($(MACHINE),)
 include $(MACHINE)/Makefile.boot
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index af11c2f..fc6d541 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -779,7 +779,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..befcd26 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -69,7 +69,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b-rev2.dtb \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
-	bcm2836-rpi-2-b.dtb
+	bcm2836-rpi-2-b.dtb \
+	bcm2835-rpi-zero.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
@@ -102,8 +103,13 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
 	bcm21664-garnet.dtb \
 	bcm23550-sparrow.dtb
 dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
 	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
 	bcm958625hr.dtb \
+	bcm988312hr.dtb \
 	bcm958625k.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb \
@@ -114,6 +120,7 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
 dtb-$(CONFIG_ARCH_CLPS711X) += \
 	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-lcdk.dtb \
 	da850-enbw-cmc.dtb \
 	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
@@ -315,6 +322,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-smd.dtb \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
 	imx53-voipac-bsb.dtb
 dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-apf6dev.dtb \
@@ -330,6 +338,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw54xx.dtb \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
@@ -339,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
+	imx6dl-ts4900.dtb \
 	imx6dl-tx6dl-comtft.dtb \
 	imx6dl-tx6s-8034.dtb \
 	imx6dl-tx6s-8035.dtb \
@@ -368,6 +378,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw54xx.dtb \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-icore-rqs.dtb \
@@ -382,6 +393,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
 	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
 	imx6q-tx6q-1010.dtb \
 	imx6q-tx6q-1010-comtft.dtb \
 	imx6q-tx6q-1020.dtb \
@@ -407,6 +419,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sdb.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb \
+	imx6ul-geam-kit.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
@@ -417,7 +430,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-nitrogen7.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
-	imx7s-colibri-eval-v3.dtb
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
@@ -570,6 +584,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-uevm.dtb
 dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
+	am57xx-beagle-x15-revb1.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
@@ -584,6 +599,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-linkstation-lswtgl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \
 	prima2-evb.dtb
@@ -603,14 +619,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
 	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
 	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-revb.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
 	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
 	arm-realview-pba8.dtb \
 	arm-realview-pbx-a9.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
@@ -624,8 +645,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3229-evb.dtb \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
+	rk3288-fennec.dtb \
 	rk3288-firefly-beta.dtb \
 	rk3288-firefly.dtb \
+	rk3288-firefly-reload.dtb \
 	rk3288-miqi.dtb \
 	rk3288-popmetal.dtb \
 	rk3288-r89.dtb \
@@ -651,6 +674,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
+	r7s72100-rskrza1.dtb \
 	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
@@ -659,6 +683,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
 	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
@@ -686,6 +711,7 @@ dtb-$(CONFIG_ARCH_SPEAR6XX) += \
 dtb-$(CONFIG_ARCH_STI) += \
 	stih407-b2120.dtb \
 	stih410-b2120.dtb \
+	stih410-b2260.dtb \
 	stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2000.dtb \
@@ -719,6 +745,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-pcduino2.dtb \
 	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	ntc-gr8-evb.dtb \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
@@ -727,6 +754,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a10s-wobo-i5.dtb \
 	sun5i-a13-difrnce-dit4350.dtb \
 	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
@@ -743,6 +771,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-mele-a1000g-quad.dtb \
 	sun6i-a31s-colorfly-e708-q1.dtb \
 	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
 	sun6i-a31s-primo81.dtb \
 	sun6i-a31s-sina31s.dtb \
 	sun6i-a31s-sinovoip-bpi-m2.dtb \
@@ -782,16 +811,22 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-q8-tablet.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
 	sun8i-a33-q8-tablet.dtb \
 	sun8i-a33-sinlinx-sina33.dtb \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
 	sun8i-h3-orangepi-one.dtb \
 	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-r16-parrot.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
@@ -836,15 +871,15 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ph1-ld4-ref.dtb \
-	uniphier-ph1-ld6b-ref.dtb \
-	uniphier-ph1-pro4-ace.dtb \
-	uniphier-ph1-pro4-ref.dtb \
-	uniphier-ph1-pro4-sanji.dtb \
-	uniphier-ph1-sld3-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb \
-	uniphier-proxstream2-gentil.dtb \
-	uniphier-proxstream2-vodka.dtb
+	uniphier-ld4-ref.dtb \
+	uniphier-ld6b-ref.dtb \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb \
+	uniphier-sld3-ref.dtb \
+	uniphier-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index c8609d8..dd45d17 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -24,12 +24,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -37,7 +37,7 @@
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -226,7 +226,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 58a05f7..c2bee45 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -29,13 +29,13 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "base:red:user";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "base:green:user";
 			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index e247c15..007b5e5 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -13,7 +13,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -28,28 +28,28 @@
 
 		compatible = "gpio-leds";
 
-		led@2 {
+		led2 {
 			label = "beaglebone:green:heartbeat";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "beaglebone:green:mmc0";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
@@ -57,7 +57,7 @@
 		};
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index ca72167..6bbb1fe 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -9,6 +9,7 @@
 
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
+#include <dt-bindings/display/tda998x.h>
 
 / {
 	model = "TI AM335x BeagleBone Black";
@@ -33,17 +34,6 @@
 	status = "okay";
 };
 
-&cpu0_opp_table {
-	/*
-	 * All PG 2.0 silicon may not support 1GHz but some of the early
-	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
-	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
-	 */
-	oppnitro@1000000000 {
-		opp-supported-hw = <0x06 0x0100>;
-	};
-};
-
 &am33xx_pinmux {
 	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
 		pinctrl-single,pins = <
@@ -75,6 +65,16 @@
 			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
 		>;
 	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
 };
 
 &lcdc {
@@ -87,16 +87,22 @@
 };
 
 &i2c0 {
-	tda19988 {
+	tda19988: tda19988 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
+
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
 
-		port {
-			hdmi_0: endpoint@0 {
-				remote-endpoint = <&lcdc_0>;
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			port@0 {
+				hdmi_0: endpoint@0 {
+					remote-endpoint = <&lcdc_0>;
+				};
 			};
 		};
 	};
@@ -105,3 +111,49 @@
 &rtc {
 	system-power-controller;
 };
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 1d64735..f9ee585 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index 817b1de..947c81b 100644
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -17,7 +17,7 @@
 	model = "CompuLab CM-T335";
 	compatible = "compulab,cm-t335", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;	/* 128 MB */
 	};
@@ -26,7 +26,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_led_pins>;
-		led@0 {
+		led0 {
 			label = "cm_t335:green";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
 			linux,default-trigger = "heartbeat";
@@ -34,7 +34,7 @@
 	};
 
 	/* regulator for mmc */
-	vmmc_fixed: fixedregulator@0 {
+	vmmc_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
 	};
 
 	/* Regulator for WiFi */
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vwlan_fixed";
 		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 5d28712..e82432c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -20,12 +20,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -33,13 +33,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wlan_en_reg: fixedregulator@2 {
+	wlan_en_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
@@ -53,7 +53,7 @@
 		enable-active-high;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -73,20 +73,20 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys@0 {
+	gpio_keys: volume_keys0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		autorepeat;
 
-		switch@9 {
+		switch9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		switch@10 {
+		switch10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@@ -497,6 +497,8 @@
 
 &lcdc {
 	status = "okay";
+
+	blue-and-red-wiring = "crossed";
 };
 
 &elm {
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 09308d6..975c36e 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -27,12 +27,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -40,13 +40,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -58,7 +58,7 @@
 		enable-active-high;
 	};
 
-	vtt_fixed: fixedregulator@3 {
+	vtt_fixed: fixedregulator3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -75,26 +75,26 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "evmsk:green:usr0";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "evmsk:green:usr1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "evmsk:green:mmc0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "evmsk:green:heartbeat";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -102,31 +102,31 @@
 		};
 	};
 
-	gpio_buttons: gpio_buttons@0 {
+	gpio_buttons: gpio_buttons0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@1 {
+		switch1 {
 			label = "button0";
 			linux,code = <0x100>;
 			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@2 {
+		switch2 {
 			label = "button1";
 			linux,code = <0x101>;
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@3 {
+		switch3 {
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 
-		switch@4 {
+		switch4 {
 			label = "button3";
 			linux,code = <0x103>;
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
@@ -170,29 +170,29 @@
 		pinctrl-1 = <&lcd_pins_sleep>;
 		status = "okay";
 		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
 		};
 		display-timings {
 			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
+				hactive		= <480>;
+				vactive		= <272>;
+				hback-porch	= <43>;
+				hfront-porch	= <8>;
+				hsync-len	= <4>;
+				vback-porch	= <12>;
+				vfront-porch	= <4>;
+				vsync-len	= <10>;
 				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
+				hsync-active	= <0>;
+				vsync-active	= <0>;
 			};
 		};
 	};
@@ -711,5 +711,7 @@
 };
 
 &lcdc {
-      status = "okay";
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
 };
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 7d8b8fe..85e04c2 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -19,12 +19,12 @@
 	model = "TI AM3359 ICE-V2";
 	compatible = "ti,am3359-icev2", "ti,am33xx";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -32,7 +32,7 @@
 		regulator-boot-on;
 	};
 
-	vtt_fixed: fixedregulator@1 {
+	vtt_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -43,52 +43,52 @@
 		enable-active-high;
 	};
 
-	leds@0 {
+	leds0 {
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "out0";
 			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "out1";
 			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "out2";
 			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "out3";
 			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "out4";
 			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "out5";
 			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@6 {
+		led6 {
 			label = "out6";
 			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@7 {
+		led7 {
 			label = "out7";
 			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -96,49 +96,58 @@
 	};
 
 	/* Tricolor status LEDs */
-	leds@1 {
+	leds1 {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds>;
 
-		led@0 {
+		led0 {
 			label = "status0:red:cpu0";
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "cpu0";
 		};
 
-		led@1 {
+		led1 {
 			label = "status0:green:usr";
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "status0:yellow:usr";
 			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "status1:red:mmc0";
 			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
 
-		led@4 {
+		led4 {
 			label = "status1:green:usr";
 			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "status1:yellow:usr";
 			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index df63484..a5769a8 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -31,14 +31,14 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "com:green:user";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -46,7 +46,7 @@
 		regulator-boot-on;
 	};
 
-	vmmc: fixedregulator@0 {
+	vmmc: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -161,7 +161,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index d97b0ef..1d6c6fa 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -19,13 +19,13 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
 	/* Power supply provides a fixed 5V @2A */
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -34,7 +34,7 @@
 	};
 
 	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: fixedregulator@1 {
+	vmmcsd_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index f313999..483d585 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -27,7 +27,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "nanobone:green:usr1";
 			gpios = <&gpio1 5 0>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 8867aaa..30e2f87 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -41,15 +41,15 @@
 		compatible = "ti,da830-evm-audio";
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 	};
 
-	v3v3c_reg: fixedregulator@1 {
+	v3v3c_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 	};
 
-	vdd5_reg: fixedregulator@2 {
+	vdd5_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 	};
 };
@@ -595,14 +595,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_leds_pins>;
 
-	led@0 {
+	led0 {
 		label = "pepper:user0:blue";
 		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
 		default-state = "off";
 	};
 
-	led@1 {
+	led1 {
 		label = "pepper:user1:red";
 		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
@@ -616,21 +616,21 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 
-	button@0 {
+	button0 {
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	button@1 {
+	button1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 		wakeup-source;
 	};
 
-	buttons@2 {
+	buttons2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 86f7731..75e24ad 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -25,7 +25,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -33,7 +33,7 @@
 	regulators {
 		compatible = "simple-bus";
 
-		vcc5v: fixedregulator@0 {
+		vcc5v: fixedregulator0 {
 			compatible = "regulator-fixed";
 			regulator-name = "vcc5v";
 			regulator-min-microvolt = <5000000>;
@@ -197,7 +197,7 @@
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 837d5b8..bf8727a 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -64,50 +64,50 @@
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "shc:power:red";
 			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "shc:power:bl";
 			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 			default-state = "on";
 		};
 
-		led@3 {
+		led3 {
 			label = "shc:lan:red";
 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "shc:lan:bl";
 			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "shc:cloud:red";
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@6 {
+		led6 {
 			label = "shc:cloud:bl";
 			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index a6efbe6..b0dfa6f 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -19,6 +19,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
 	chosen {
 		stdout-path = &uart0;
 	};
@@ -28,25 +33,25 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@0 {
+		led0 {
 			label = "sl50:green:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "sl50:red:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "sl50:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "sl50:red:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -103,7 +108,7 @@
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 282f6d4..02c6736 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -11,10 +11,14 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
 	regulators {
 		compatible = "simple-bus";
 
-		vcc3v3: fixedregulator@1 {
+		vcc3v3: fixedregulator1 {
 			compatible = "regulator-fixed";
 			regulator-name = "vcc3v3";
 			regulator-min-microvolt = <3300000>;
@@ -24,6 +28,58 @@
 	};
 };
 
+/* Audio */
+&am33xx_pinmux {
+	mcasp0_pins: pinmux_mcasp0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)  /* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
+		>;
+	};
+};
+
+&i2c0 {
+	tlv320aic3007: tlv320aic3007@18 {
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		AVDD-supply = <&vcc3v3>;
+		IOVDD-supply = <&vcc3v3>;
+		DRVDD-supply = <&vcc3v3>;
+		DVDD-supply = <&vdig1_reg>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+	>;
+	tx-num-evt = <16>;
+	rt-num-evt = <16>;
+	status = "okay";
+};
+
+&sound {
+	ti,model = "AM335x-Wega";
+	ti,audio-codec = <&tlv320aic3007>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,audio-routing =
+		"Line Out",		"LLOUT",
+		"Line Out",		"RLOUT",
+		"LINE1L",		"Line In",
+		"LINE1R",		"Line In";
+	clocks = <&mcasp0_fck>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
 /* CAN Busses */
 &am33xx_pinmux {
 	dcan1_pins: pinmux_dcan1 {
@@ -99,6 +155,12 @@
 	status = "okay";
 };
 
+/* Power */
+&vdig1_reg {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
 /* UARTs */
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 98748c6..194d884 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -11,11 +11,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/am33xx.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,am33xx";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c0;
@@ -45,9 +45,19 @@
 			device_type = "cpu";
 			reg = <0>;
 
-			operating-points-v2 = <&cpu0_opp_table>;
-			ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
-			ti,syscon-rev = <&scm_conf 0x600>;
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -56,78 +66,6 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-
-		/*
-		 * The three following nodes are marked with opp-suspend
-		 * because the can not be enabled simultaneously on a
-		 * single SoC.
-		 */
-		opp50@300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0x06 0x0010>;
-			opp-suspend;
-		};
-
-		opp100@275000000 {
-			opp-hz = /bits/ 64 <275000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0x00FF>;
-			opp-suspend;
-		};
-
-		opp100@300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0020>;
-			opp-suspend;
-		};
-
-		opp100@500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp100@600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0040>;
-		};
-
-		opp120@600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp120@720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x06 0x0080>;
-		};
-
-		oppturbo@720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		oppturbo@800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x06 0x0100>;
-		};
-
-		oppnitro@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0x04 0x0200>;
-		};
-	};
-
 	pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupts = <3>;
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index f9d8f39..083ff50 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -15,7 +15,7 @@
 	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
 	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index b4127c6..0e4a125 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -13,7 +13,7 @@
 	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
 	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 5e3f5e8..0db19d3 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -15,7 +15,7 @@
 		serial3 = &uart4;
 	};
 
-	ocp {
+	ocp@68000000 {
 		am35x_otg_hs: am35x_otg_hs@5c040000 {
 			compatible = "ti,omap3-musb";
 			ti,hwmods = "am35x_otg_hs";
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
index fdf5ce6..3395783 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -13,7 +13,7 @@
 	model = "TeeJet Mt.Ventoux";
 	compatible = "teejet,mt_ventoux", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 0fadae5..a275fa9 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -11,12 +11,16 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,am4372", "ti,am43";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
 
 	aliases {
 		i2c0 = &i2c0;
@@ -132,7 +136,7 @@
 		cache-level = <2>;
 	};
 
-	ocp {
+	ocp@44000000 {
 		compatible = "ti,am4372-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 9551c47..9e92d48 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -209,7 +209,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -218,7 +217,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -227,7 +225,6 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-suspend-enable;
 			regulator-min-microvolt = <1500000>;
@@ -237,7 +234,6 @@
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
@@ -246,7 +242,6 @@
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -255,7 +250,6 @@
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 14677d5..957840c 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -58,7 +58,7 @@
 		default-brightness-level = <8>;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -513,7 +513,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -522,7 +521,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -531,33 +529,42 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
+
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 12a6951..25ce611 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -104,7 +104,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch0 {
 			label = "power-button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 5687d6b..319d942 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -64,7 +64,7 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 
 		pinctrl-names = "default";
@@ -93,28 +93,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins>;
 
-		led@0 {
+		led0 {
 			label = "am437x-sk:red:heartbeat";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "am437x-sk:green:mmc1";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "am437x-sk:blue:cpu0";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "am437x-sk:blue:usr3";
 			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
 			default-state = "off";
@@ -428,7 +428,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			/* VDD_CORE limits min of OPP50 and max of OPP100 */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
@@ -438,7 +437,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
@@ -448,16 +446,20 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdds_ddr";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "v3_3d";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -465,8 +467,31 @@
 			regulator-always-on;
 		};
 
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-name = "v1_8d";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ad32e55..9d35c3f 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -32,7 +32,7 @@
 		enable-active-high;
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -67,7 +67,7 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -421,7 +421,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -430,7 +429,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -439,7 +437,6 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
@@ -448,7 +445,6 @@
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "vdcdc4";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -457,21 +453,18 @@
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index e3acb99..87bbc66 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -18,7 +18,7 @@
 	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
 		     "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 0000000..6df7829
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+};
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+};
+
+&mac {
+	status = "okay";
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
+	dr_mode = "peripheral";
+};
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&pcie1 {
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 0000000..ca85570
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd_3v3>;
+	vmmc-aux-supply = <&ldo1_reg>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index c4d04c5..8c66f2e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -1,822 +1,24 @@
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/dts-v1/;
 
-#include "dra74x.dtsi"
-#include "am57xx-commercial-grade.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-beagle-x15-common.dtsi"
 
 / {
+	/* NOTE: This describes the "original" pre-production A2 revision */
 	model = "TI AM5728 BeagleBoard-X15";
-	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		rtc0 = &mcp_rtc;
-		rtc1 = &tps659038_rtc;
-		rtc2 = &rtc;
-		display0 = &hdmi0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		vin-supply = <&regen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	aic_dvdd: fixedregulator-aic_dvdd {
-		compatible = "regulator-fixed";
-		regulator-name = "aic_dvdd_fixed";
-		vin-supply = <&vdd_3v3>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&smps3_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins_default>;
-
-		led@0 {
-			label = "beagle-x15:usr0";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "beagle-x15:usr1";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "beagle-x15:usr2";
-			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beagle-x15:usr3";
-			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "disk-activity";
-			default-state = "off";
-		};
-	};
-
-	gpio_fan: gpio_fan {
-		/* Based on 5v 500mA AFB02505HHB */
-		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0     0>,
-				     <13000 1>;
-		#cooling-cells = <2>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-			<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	sound0: sound0 {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "BeagleBoard-X15";
-		simple-audio-card,widgets =
-			"Line", "Line Out",
-			"Line", "Line In";
-		simple-audio-card,routing =
-			"Line Out",	"LLOUT",
-			"Line Out",	"RLOUT",
-			"MIC2L",	"Line In",
-			"MIC2R",	"Line In";
-		simple-audio-card,format = "dsp_b";
-		simple-audio-card,bitclock-master = <&sound0_master>;
-		simple-audio-card,frame-master = <&sound0_master>;
-		simple-audio-card,bitclock-inversion;
-
-		simple-audio-card,cpu {
-			sound-dai = <&mcasp3>;
-		};
-
-		sound0_master: simple-audio-card,codec {
-			sound-dai = <&tlv320aic3104>;
-			clocks = <&clkout2_clk>;
-		};
-	};
 };
 
-&dra7_pmx_core {
-	leds_pins_default: leds_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
-		>;
-	};
-
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	i2c3_pins_default: i2c3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
-		>;
-	};
-
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	cpsw_pins_default: cpsw_pins_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
-		>;
-
-	};
-
-	cpsw_pins_sleep: cpsw_pins_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
-
-			/* Slave 2 */
-			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_pins_default: davinci_mdio_pins_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
-		>;
-	};
-
-	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	tps659038_pins_default: tps659038_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
-		>;
-	};
-
-	tmp102_pins_default: tmp102_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
-		>;
-	};
-
-	mcp79410_pins_default: mcp79410_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
-		>;
-	};
-
-	clkout2_pins_default: clkout2_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
-		>;
-	};
-
-	clkout2_pins_sleep: clkout2_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
-		>;
-	};
-
-	mcasp3_pins_default: mcasp3_pins_default {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
-			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
-		>;
-	};
-
-	mcasp3_pins_sleep: mcasp3_pins_sleep {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
-			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps659038_pins_default>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_CORE */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS7 unused */
-
-				smps8_reg: smps8 {
-					/* VDD_1V8 */
-					regulator-name = "smps8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS9 unused */
-
-				ldo1_reg: ldo1 {
-					/* VDD_SD / VDDSHV8  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_SHV5 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHYA */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_1V8_PHYB */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		extcon_usb2: tps659038_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		};
-
-	};
-
-	tmp102: tmp102@48 {
-		compatible = "ti,tmp102";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tmp102_pins_default>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	tlv320aic3104: tlv320aic3104@18 {
-		#sound-dai-cells = <0>;
-		compatible = "ti,tlv320aic3104";
-		reg = <0x18>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&clkout2_pins_default>;
-		pinctrl-1 = <&clkout2_pins_sleep>;
-		assigned-clocks = <&clkoutmux2_clk_mux>;
-		assigned-clock-parents = <&sys_clk2_dclk_div>;
-
-		status = "okay";
-		adc-settle-ms = <40>;
-
-		AVDD-supply = <&vdd_3v3>;
-		IOVDD-supply = <&vdd_3v3>;
-		DRVDD-supply = <&vdd_3v3>;
-		DVDD-supply = <&aic_dvdd>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "at,24c32";
-		reg = <0x50>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_default>;
-	clock-frequency = <400000>;
-
-	mcp_rtc: rtc@6f {
-		compatible = "microchip,mcp7941x";
-		reg = <0x6f>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
-				      <&dra7_pmx_core 0x424>;
-		interrupt-names = "irq", "wakeup";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcp79410_pins_default>;
-
-		vcc-supply = <&vdd_3v3>;
-		wakeup-source;
-	};
-};
-
-&gpio7 {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps12_reg>;
-	voltage-tolerance = <1>;
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3f8>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_pins_default>;
-	pinctrl-1 = <&cpsw_pins_sleep>;
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_pins_default>;
-	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
 };
 
 &mmc1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-
 	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
-&mmc2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&vdd_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
-	cap-mmc-dual-data-rate;
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	/*
-	 * Stand alone usage is peripheral only.
-	 * However, with some resistor modifications
-	 * this port can be used via expansion connectors
-	 * as "host" or "dual-role". If so, provide
-	 * the necessary dr_mode override in the expansion
-	 * board's DT.
-	 */
-	dr_mode = "peripheral";
-};
-
-&cpu_trips {
-	cpu_alert1: cpu_alert1 {
-		temperature = <50000>; /* millicelsius */
-		hysteresis = <2000>; /* millicelsius */
-		type = "active";
-	};
-};
-
-&cpu_cooling_maps {
-	map1 {
-		trip = <&cpu_alert1>;
-		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&thermal_zones {
-	board_thermal: board_thermal {
-		polling-delay-passive = <1250>; /* milliseconds */
-		polling-delay = <1500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&tmp102     0>;
-
-		board_trips: trips {
-			board_alert0: board_alert {
-				temperature = <40000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "active";
-			};
-
-			board_crit: board_crit {
-				temperature = <105000>; /* millicelsius */
-				hysteresis = <0>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		board_cooling_maps: cooling-maps {
-			map0 {
-				trip = <&board_alert0>;
-				cooling-device =
-				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-       };
-};
-
-&dss {
-	status = "ok";
-
-	vdda_video-supply = <&ldoln_reg>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};
-
-&pcie1 {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
-&mcasp3 {
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&mcasp3_pins_default>;
-	pinctrl-1 = <&mcasp3_pins_sleep>;
-	assigned-clocks = <&mcasp3_ahclkx_mux>;
-	assigned-clock-parents = <&sys_clkin2>;
-	status = "okay";
-
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	/* 4 serializers */
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-		1 2 0 0
-	>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
 };
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 378b142..203266f 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -19,7 +19,7 @@
 	model = "CompuLab CL-SOM-AM57x";
 	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
 	};
@@ -29,7 +29,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins_default>;
 
-		led@0 {
+		led0 {
 			label = "cl-som-am57x:green";
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 0e63b9d..03cec62 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -304,3 +304,52 @@
 	ti,non-removable;
 	max-frequency = <96000000>;
 };
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	m25p80@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000040000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@2 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@3 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@5 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 0000000..e18769d
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 0000000..26b1c69
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
index e68527b..e68527b 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
index 87ff602..aac1edd 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
@@ -24,7 +24,7 @@
 #include "arm-realview-eb-mp.dtsi"
 
 / {
-	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
 	arm,hbi = <0x146>;
 
 	/*
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 0000000..42efac7
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
new file mode 100644
index 0000000..f533c8b4
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 0000000..a79e1d1
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 1c6a040..e2e9599 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -51,14 +51,6 @@
 		regulator-boot-on;
         };
 
-	veth: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "veth";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-	};
-
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -134,16 +126,15 @@
 		bank-width = <4>;
 	};
 
-	/* SMSC 9118 ethernet with PHY and EEPROM */
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
 	ethernet: ethernet@4e000000 {
-		compatible = "smsc,lan9118", "smsc,lan9115";
+		compatible = "smsc,lan91c111";
 		reg = <0x4e000000 0x10000>;
-		phy-mode = "mii";
-		reg-io-width = <4>;
-		smsc,irq-active-high;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&veth>;
-		vddvario-supply = <&veth>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
 	};
 
 	usb: usb@4f000000 {
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 2364fc5..033fa63 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -155,20 +155,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -274,3 +260,18 @@
 		compatible = "linux,spdif-dir";
 	};
 };
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 1aba08e..01cded3 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -68,26 +68,6 @@
 				phy-mode = "rgmii-id";
 			};
 
-			spi@10600 {
-				status = "okay";
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					/* MX25L8006E */
-					compatible = "mxicy,mx25l8005", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x0 0x100000>;
-					};
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
@@ -176,3 +156,23 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 8ca7a43..a9cc427 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -87,62 +87,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000c0000>; /* 768KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000c0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@00390000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x00390000 0x00440000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				pinctrl-0 = <&i2c0_pins>;
@@ -347,3 +291,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@00390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index a718866..3ccedc9 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -148,26 +148,6 @@
 				interrupts = <50>;
 			};
 
-			spi0: spi@10600 {
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				#address-cells = <1>;
@@ -320,6 +300,42 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 3b06aa8..b425810 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -134,24 +134,6 @@
 				wt-override;
 			};
 
-			/*
-			 * Default SPI pinctrl setting, can be overwritten on
-			 * board level if a different configuration is used.
-			 */
-			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins1>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-			};
-
 			i2c0: i2c@11000 {
 				reg = <0x11000 0x20>;
 			};
@@ -447,3 +429,19 @@
 		marvell,function = "ge1";
 	};
 };
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 2d3fd6e..db5b9f6 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -65,20 +65,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi1: spi@10680 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <54000000>;
-				};
-			};
-
 			i2c0: i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -155,6 +141,10 @@
 				bm,pool-short = <3>;
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
 			/* CON4 */
 			ethernet@70000 {
 				pinctrl-names = "default";
@@ -178,15 +168,35 @@
 
 			nfc: flash@d0000 {
 				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
 				num-cs = <1>;
 				nand-ecc-strength = <4>;
 				nand-ecc-step-size = <512>;
 				marvell,nand-keep-config;
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00800000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00800000 0x00400000>;
+						read-only;
+					};
+
+					partition@c00000 {
+						label = "Root";
+						reg = <0x00c00000 0x3f400000>;
+					};
+				};
 			};
 
 			usb3@f0000 {
@@ -239,3 +249,17 @@
 		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 22f7a13..8f0e508 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -62,11 +62,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-
-			spi@10600 {
-				status = "disabled";
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -332,3 +327,7 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 2e0556a..71ce201 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -315,30 +315,6 @@
 				status = "okay";
 			};
 
-			spi@10680 {
-				/*
-				 * We don't seem to have the W25Q32 on the
-				 * A1 Rev 2.0 boards, so disable SPI.
-				 * CS0: W25Q32 (doesn't appear to be present)
-				 * CS1:
-				 * CS2: mikrobus
-				 */
-				pinctrl-0 = <&spi1_pins
-					     &clearfog_spi1_cs_pins
-					     &mikro_spi_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <3000000>;
-					status = "disabled";
-				};
-			};
-
 			usb@58000 {
 				/* CON3, nearest  power. */
 				status = "okay";
@@ -390,12 +366,12 @@
 
 			port@0 {
 				reg = <0>;
-				label = "lan1";
+				label = "lan5";
 			};
 
 			port@1 {
 				reg = <1>;
-				label = "lan2";
+				label = "lan4";
 			};
 
 			port@2 {
@@ -405,12 +381,12 @@
 
 			port@3 {
 				reg = <3>;
-				label = "lan4";
+				label = "lan2";
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan1";
 			};
 
 			port@5 {
@@ -444,3 +420,27 @@
 		};
 	};
 };
+
+&spi1 {
+	/*
+	 * We don't seem to have the W25Q32 on the
+	 * A1 Rev 2.0 boards, so disable SPI.
+	 * CS0: W25Q32 (doesn't appear to be present)
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins
+		     &clearfog_spi1_cs_pins
+		     &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index ea93ed7..de26c76 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -201,3 +189,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd75e5e..895fa6c 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -64,21 +64,6 @@
 			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-					m25p,fast-read;
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -433,3 +418,18 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 853f973..dd3462dd 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -70,18 +70,6 @@
 			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -142,3 +130,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 3312be6..2d76688 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -170,30 +170,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -287,6 +263,15 @@
 					marvell,function = "spi1";
 				};
 
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
 				uart0_pins: uart-pins-0 {
 					marvell,pins = "mpp0", "mpp1";
 					marvell,function = "ua0";
@@ -649,6 +634,30 @@
 			no-memory-wc;
 			status = "disabled";
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
new file mode 100644
index 0000000..34e279d
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -0,0 +1,175 @@
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <8>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+					};
+				};
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
index 094e39c..6cd18d8 100644
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
new file mode 100644
index 0000000..2cdbba8
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395-gp.dts
@@ -0,0 +1,163 @@
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00600000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00600000 0x00400000>;
+						read-only;
+					};
+
+					partition@1000000 {
+						label = "Root";
+						reg = <0x00a00000 0x3f600000>;
+					};
+				};
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi
new file mode 100644
index 0000000..ab5dc49
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index 788c3ba..268c834 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -65,30 +65,6 @@
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
 
 		internal-regs {
-			spi@10680 {
-				status = "okay";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <108000000>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "Filesystem";
-						reg = <0x400000 0x1000000>;
-					};
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
@@ -108,6 +84,10 @@
 				status = "okay";
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
 			flash@d0000 {
 				status = "okay";
 				pinctrl-0 = <&nand_pins>;
@@ -132,6 +112,10 @@
 					reg = <0x1000000 0x3f000000>;
 				};
 			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
 		};
 
 		pcie-controller {
@@ -151,3 +135,27 @@
 		};
 	};
 };
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
index fdc2591..234a998 100644
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ b/arch/arm/boot/dts/armada-398.dtsi
@@ -44,7 +44,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armada-39x.dtsi"
+#include "armada-395.dtsi"
 
 / {
 	compatible = "marvell,armada398", "marvell,armada390";
@@ -55,6 +55,14 @@
 				compatible = "marvell,mv88f6928-pinctrl";
 				reg = <0x18000 0x20>;
 			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index dc6efd3..34cba87 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -55,6 +55,8 @@
 	compatible = "marvell,armada390";
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -78,6 +80,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
 			     "simple-bus";
@@ -131,30 +138,6 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
@@ -269,6 +252,34 @@
 				};
 			};
 
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			system-controller@18200 {
 				compatible = "marvell,armada-390-system-controller",
 					     "marvell,armada-370-xp-system-controller";
@@ -317,11 +328,29 @@
 				clock-names = "nbclk", "fixed";
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>,
+				      <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
 			cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
 			pmsu@22000 {
 				compatible = "marvell,armada-390-pmsu",
 					     "marvell,armada-380-pmsu";
@@ -368,6 +397,13 @@
 				};
 			};
 
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			flash@d0000 {
 				compatible = "marvell,armada370-nand";
 				reg = <0xd0000 0x54>;
@@ -380,7 +416,10 @@
 
 			sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 17>;
 				mrvl,clk-delay-cycles = <0x1F>;
@@ -395,6 +434,12 @@
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
 		};
 
 		pcie-controller {
@@ -501,6 +546,30 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
@@ -510,5 +579,12 @@
 			#clock-cells = <0>;
 			clock-frequency = <1000000000>;
 		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 5c21b23..ce15271 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -135,18 +135,6 @@
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
 		};
 	};
 
@@ -179,3 +167,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 62422a9..075120b 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -231,18 +231,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-				};
-			};
-
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -277,3 +265,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 061f423..190e4ec 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -232,18 +232,6 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			bm@c0000 {
 				status = "okay";
 			};
@@ -262,3 +250,15 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 7a46154..076f27f 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -279,18 +279,6 @@
 					reg = <0x180000 0x780000>;   /* 7.5MB */
 				};
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <40000000>;
-				};
-			};
 		};
 	};
 
@@ -398,3 +386,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index d17dab0..ae28673 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -110,62 +110,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000d0000>; /* 832KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000d0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@003a0000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x003a0000 0x00430000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -362,3 +306,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@00000000 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@000c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@003a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@007d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@007f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 553349c..4a5f99e 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -84,19 +84,6 @@
 				wt-override;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-			};
-
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x100>;
@@ -362,6 +349,12 @@
 		marvell,function = "spi0";
 	};
 
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
 	uart2_pins: uart2-pins {
 		marvell,pins = "mpp42", "mpp43";
 		marvell,function = "uart2";
@@ -372,3 +365,15 @@
 		marvell,function = "uart3";
 	};
 };
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 16331aa..ba332e3 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,5 +1,3 @@
-#include "skeleton.dtsi"
-
 / {
 	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
index 3fac4c4..3489019c 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -41,6 +41,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
 #include "skeleton.dtsi"
 
 / {
@@ -109,14 +110,14 @@
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0xfaf00200 0x20>;
 		interrupts = <GIC_PPI 11 0xf01>;
-		clocks = <&clkctrl 1>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
 	};
 
 	timer@faf00600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0xfaf00600 0x20>;
 		interrupts = <GIC_PPI 13 0xf04>;
-		clocks = <&clkctrl 1>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
 		status = "disabled";
 	};
 
@@ -136,12 +137,20 @@
 		arm,data-latency = <1 1 1>;
 		arm,tag-latency = <1 1 1>;
 		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 		interrupt-parent = <&intc>;
 	};
 
@@ -157,7 +166,7 @@
 		ethernet: ethernet@f8010000 {
 			clock-names = "phy_ref_clk", "apb_pclk";
 			clocks = <&eth_phy_ref_clk>,
-				<&clkctrl 4>;
+				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
 			compatible = "snps,dwc-qos-ethernet-4.10";
 			interrupt-parent = <&intc>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -175,8 +184,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8036000 0x1000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -184,8 +193,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8037000 0x1000>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -193,8 +202,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8038000 0x1000>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
@@ -202,8 +211,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xf8039000 0x1000>;
 			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkctrl 13>,
-				<&clkctrl 12>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
 			clock-names = "uart_clk", "apb_pclk";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index afbe89c..675bb0f 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -53,6 +53,12 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <1500>;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index c3bf7d2..7c9e0fa 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -209,6 +209,24 @@
 			#dma-cells = <1>;
 		};
 
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		amac1: ethernet@23000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x023000 0x1000>,
+			      <0x111000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		nand: nand@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
@@ -223,6 +241,14 @@
 			brcm,nand-has-wp;
 		};
 
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
@@ -246,6 +272,17 @@
 			clock-names = "apb_pclk";
 		};
 
+		srab: srab@36000 {
+			compatible = "brcm,nsp-srab";
+			reg = <0x36000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			/* ports are defined in board DTS */
+		};
+
 		i2c0: i2c@38000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x38000 0x50>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 35ff4e7a..f7f9db3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 306a84e..8be102f 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-a", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index d5fdb8e..35cde65 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index bfc4bd9..84df85e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 0371bb7..8e626a8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -2,6 +2,7 @@
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
new file mode 100644
index 0000000..60e359f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index caf2707..e9b47b2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -2,6 +2,7 @@
 
 / {
 	memory {
+		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
 
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 29e1cfe..39dccf62 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 #include "bcm2836.dtsi"
 #include "bcm2835-rpi.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 0000000..73f4ece
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b982522..46d46d8 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -2,7 +2,6 @@
 #include <dt-bindings/clock/bcm2835.h>
 #include <dt-bindings/clock/bcm2835-aux.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 /* This include file covers the common peripherals and configuration between
  * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@@ -13,6 +12,8 @@
 	compatible = "brcm,bcm2835";
 	model = "BCM2835";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	chosen {
 		bootargs = "earlyprintk console=ttyAMA0";
@@ -289,6 +290,8 @@
 			interrupts = <1 9>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
 		};
 
 		v3d: v3d@7ec00000 {
@@ -316,5 +319,12 @@
 			clock-frequency = <19200000>;
 		};
 
+		clk_usb: clock@4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 8af4791..ae4b388 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -140,6 +140,15 @@
 		};
 	};
 
+	usb2_phy: usb2-phy {
+		compatible = "brcm,ns-usb2-phy";
+		reg = <0x1800c000 0x1000>;
+		reg-names = "dmu";
+		#phy-cells = <0>;
+		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+		clock-names = "phy-ref-clk";
+	};
+
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -232,6 +241,8 @@
 
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			phys = <&usb2_phy>;
 		};
 
 		usb3: usb3@23000 {
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
new file mode 100644
index 0000000..a21b0fd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -0,0 +1,130 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958522ER)";
+	compatible = "brcm,bcm58522", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+
+&amac1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
new file mode 100644
index 0000000..be7f2f8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -0,0 +1,142 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958525ER)";
+	compatible = "brcm,bcm58525", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+
+&amac1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index d257e83..959cde9 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "NorthStar Plus XMC (BCM958525xmc)";
@@ -45,6 +46,35 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&i2c0 {
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
 };
 
 &nand {
@@ -85,7 +115,7 @@
 	};
 };
 
-/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
+/* XHCI, MMC, and Ethernet support needed to be complete */
 
 &uart0 {
 	status = "okay";
@@ -99,6 +129,18 @@
 	status = "okay";
 };
 
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
 &pinctrl {
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_sel>;
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
new file mode 100644
index 0000000..ad2aa87
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -0,0 +1,170 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958622HR)";
+	compatible = "brcm,bcm58622", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 and SLIC support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
new file mode 100644
index 0000000..4ceb8fe
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -0,0 +1,178 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958623HR)";
+	compatible = "brcm,bcm58623", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 and SLIC support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 03b8bbe..4420025 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
@@ -47,7 +48,14 @@
 	};
 
 	memory {
-		reg = <0x60000000 0x20000000>;
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
 	};
 };
 
@@ -109,3 +117,64 @@
 		groups = "nand_grp";
 	};
 };
+
+&amac0 {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..05c5f98 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -46,6 +46,11 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
 };
 
 &uart0 {
@@ -56,6 +61,14 @@
 	status = "okay";
 };
 
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
new file mode 100644
index 0000000..104afe9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -0,0 +1,182 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM988312HR)";
+	compatible = "brcm,bcm88312", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+/* USB 2/3 support needed to be complete */
+
+&amac0 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			ethernet = <&amac0>;
+			label = "cpu";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 3c0907b..1c47579 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -49,7 +49,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index ae81009..425c489 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -39,13 +39,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500 (BG2) SoC";
 	compatible = "marvell,berlin2", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -89,7 +90,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -447,7 +448,6 @@
 				reg = <0x2000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@3000 {
@@ -455,7 +455,6 @@
 				reg = <0x3000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio1: gpio@5000 {
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 8ba8b50..ca24def 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -50,7 +50,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 6d06b61..4fe1574 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -39,13 +39,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500-mini (BG2CD) SoC";
 	compatible = "marvell,berlin2cd", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -78,7 +79,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 33b2875..f485308 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -43,7 +43,7 @@
 	model = "Marvell BG2-Q DMP";
 	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 2c34bfb..e548229 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -37,11 +37,11 @@
 #include <dt-bindings/clock/berlin2q.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
 	compatible = "marvell,berlin2q", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart0;
@@ -99,7 +99,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -525,7 +525,6 @@
 				reg = <0x2000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@3000 {
@@ -533,7 +532,6 @@
 				reg = <0x3000 0x100>;
 				clocks = <&refclk>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio1: gpio@5000 {
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 1a15db8..41de15f 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -29,6 +29,20 @@
 					0x04 0x00011000 0x000ff000
 				>;
 			};
+			nand_pins: nand_pins {
+				pinctrl-single,bits = <
+					/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+					0x1c 0x10110110  0xf0ff0ff0
+					/*
+					 * EMA_D[0], EMA_D[1], EMA_D[2],
+					 * EMA_D[3], EMA_D[4], EMA_D[5],
+					 * EMA_D[6], EMA_D[7]
+					 */
+					0x24 0x11111111  0xffffffff
+					/* EMA_A[1], EMA_A[2] */
+					0x30 0x01100000  0x0ff00000
+				>;
+			};
 		};
 		serial0: serial@42000 {
 			status = "okay";
@@ -131,12 +145,7 @@
 			status = "okay";
 		};
 	};
-	nand_cs3@62000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_cs3_pins>;
-	};
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -250,3 +259,33 @@
 &edma1 {
 	ti,edma-reserved-slot-ranges = <32 90>;
 };
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "ok";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
new file mode 100644
index 0000000..7b8ab21
--- /dev/null
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -0,0 +1,221 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "DA850/AM1808/OMAP-L138 LCDK";
+	compatible = "ti,da850-lcdk", "ti,da850";
+
+	aliases {
+		serial2 = &serial2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0xc0000000 0x08000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850/OMAP-L138 LCDK";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/* AHCLKX AFSX ACLKX */
+			0x00 0x00101010 0x00f0f0f0
+			/* ARX13 ARX14 */
+			0x04 0x00000110 0x00000ff0
+		>;
+	};
+
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+			0x1c 0x10110010  0xf0ff00f0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/*
+			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
+			 * EMA_D[11], EMA_D[12], EMA_D[13],
+			 * EMA_D[14], EMA_D[15]
+			 */
+			0x20 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+
+	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+		0 1 2 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+
+			ti,davinci-nand-buswidth = <16>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+
+			/*
+			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+			 * "To boot from NAND Flash, the AIS should be written
+			 * to NAND block 1 (NAND block 0 is not used by default)".
+			 * The same doc mentions that for ROM "Silicon Revision 2.1",
+			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
+			 * However the limitaion is left here by default for compatibility
+			 * with older silicon and because it needs new boot pin settings
+			 * not possible in stock LCDK.
+			 */
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot env";
+					reg = <0 0x020000>;
+				};
+				partition@0x020000 {
+					/* The LCDK defaults to booting from this partition */
+					label = "u-boot";
+					reg = <0x020000 0x080000>;
+				};
+				partition@0x0a0000 {
+					label = "free space";
+					reg = <0x0a0000 0>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 25f0f8e..f79e1b9 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -41,20 +41,40 @@
 			pinctrl-single,function-mask = <0xf>;
 			status = "disabled";
 
-			nand_cs3_pins: pinmux_nand_pins {
+			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
 				pinctrl-single,bits = <
-					/* EMA_OE, EMA_WE */
-					0x1c 0x00110000  0x00ff0000
-					/* EMA_CS[4],EMA_CS[3]*/
-					0x1c 0x00000110  0x00000ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
+					/* UART0_RTS UART0_CTS */
+					0x0c 0x22000000 0xff000000
+				>;
+			};
+			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART0_TXD UART0_RXD */
+					0x0c 0x00220000 0x00ff0000
+				>;
+			};
+			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART1_CTS UART1_RTS */
+					0x00 0x00440000 0x00ff0000
+				>;
+			};
+			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART1_TXD UART1_RXD */
+					0x10 0x22000000 0xff000000
+				>;
+			};
+			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART2_CTS UART2_RTS */
+					0x00 0x44000000 0xff000000
+				>;
+			};
+			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART2_TXD UART2_RXD */
+					0x10 0x00220000 0x00ff0000
 				>;
 			};
 			i2c0_pins: pinmux_i2c0_pins {
@@ -274,31 +294,36 @@
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
+				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
 		ecap0: ecap@306000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
 		ecap1: ecap@307000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
 		ecap2: ecap@308000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			compatible = "ti,da850-ecap", "ti,am3352-ecap",
+				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";
@@ -375,17 +400,14 @@
 			dma-names = "tx", "rx";
 		};
 	};
-	nand_cs3@62000000 {
-		compatible = "ti,davinci-nand";
-		reg = <0x62000000 0x807ff
-		       0x68000000 0x8000>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
+	aemif: aemif@68000000 {
+		compatible = "ti,da850-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		reg = <0x68000000 0x00008000>;
+		ranges = <0 0 0x60000000 0x08000000
+			  1 0 0x68000000 0x00008000>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 4128fa9..d6657b3 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -12,13 +12,13 @@
 	model = "DM8148 EVM";
 	compatible = "ti,dm8148-evm", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 3f18486..63883b3 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -11,7 +11,7 @@
 	model = "HP t410 Smart Zero Client";
 	compatible = "hp,t410", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
@@ -27,7 +27,7 @@
 		regulator-always-on;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 68e412c..ff90a6c 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -7,11 +7,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/dm814x.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm814";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index f50348b..0bf55fa 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -12,14 +12,14 @@
 	model = "DM8168 EVM";
 	compatible = "ti,dm8168-evm", "ti,dm8168";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000	/* 1 GB */
 		       0xc0000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* FDC6331L controlled by SD_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 44e39c74..f1e0f77 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -7,11 +7,11 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm816";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index f820573..155eb32 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -12,13 +12,13 @@
 	model = "DRA62x J5 Eco EVM";
 	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* MIC94060YC6 controlled by SD1_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index bafcfac..132f2be 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -16,7 +16,7 @@
 	model = "TI DRA742";
 	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
@@ -105,25 +105,25 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@0 {
+		led0 {
 			label = "dra7:usr1";
 			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "dra7:usr2";
 			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "dra7:usr3";
 			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "dra7:usr4";
 			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -664,10 +664,10 @@
 &qspi {
 	status = "okay";
 
-	spi-max-frequency = <64000000>;
+	spi-max-frequency = <76800000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d9bfb94..d4fcd68 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -10,8 +10,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/dra.h>
 
-#include "skeleton.dtsi"
-
 #define MAX_SOURCES 400
 
 / {
@@ -82,9 +80,11 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 
-			operating-points-v2 = <&cpu0_opp_table>;
-			ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
-			ti,syscon-rev = <&scm_wkup 0x204>;
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -98,24 +98,6 @@
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp_nom@1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1060000 850000 1150000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp_od@1176000000 {
-			opp-hz = /bits/ 64 <1176000000>;
-			opp-microvolt = <1160000 885000 1160000>;
-			opp-supported-hw = <0xFF 0x02>;
-		};
-	};
-
 	/*
 	 * The soc node represents the soc top level view. It is used for IPs
 	 * that are not memory mapped in the MPU view or for the MPU itself.
@@ -301,6 +283,7 @@
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <0>;
 				ti,hwmods = "pcie1";
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
@@ -336,6 +319,7 @@
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
+				linux,pci-domain = <1>;
 				ti,hwmods = "pcie2";
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
@@ -1413,7 +1397,7 @@
 			ti,hwmods = "ocp2scp1";
 
 			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2", "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
 				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
@@ -1717,7 +1701,7 @@
 		mac: ethernet@48484000 {
 			compatible = "ti,dra7-cpsw","ti,cpsw";
 			ti,hwmods = "gmac";
-			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+			clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
 			clock-names = "fck", "cpts";
 			cpdma_channels = <8>;
 			ale_entries = <1024>;
@@ -1726,7 +1710,7 @@
 			mac_control = <0x20>;
 			slaves = <2>;
 			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
+			cpts_clock_mult = <0x784CFE14>;
 			cpts_clock_shift = <29>;
 			reg = <0x48484000 0x1000
 			       0x48485200 0x2E00>;
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 9d3cf50..c94d8d64 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -681,10 +681,10 @@
 &qspi {
 	status = "okay";
 
-	spi-max-frequency = <64000000>;
+	spi-max-frequency = <76800000>;
 	m25p80@0 {
 		compatible = "s25fl256s1";
-		spi-max-frequency = <64000000>;
+		spi-max-frequency = <76800000>;
 		reg = <0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index f9cfd3b..064b322 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -11,7 +11,7 @@
 / {
 	model = "TI DRA722 Rev C EVM";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index cc1d32c..e3a9b69 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -9,7 +9,7 @@
 / {
 	model = "TI DRA722";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 8987b3e..0a78347 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -17,7 +17,6 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 8378b44..3330738e 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1003,6 +1003,14 @@
 		ti,index-power-of-two;
 	};
 
+	gmac_main_clk: gmac_main_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gmac_250m_dclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
 	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
@@ -1718,13 +1726,12 @@
 		reg = <0x0c00>;
 	};
 
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@13d0 {
+	rmii_50mhz_clk_mux: rmii_50mhz_clk_mux@13d0 {
 		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_h11x2_ck>, <&rmii_clk_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x13d0>;
-		ti,dividers = <2>;
 	};
 
 	gmac_rft_clk_mux: gmac_rft_clk_mux@13d0 {
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index 504cf45..98fc667 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -16,7 +16,8 @@
 		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
 	};
 
-	memory {
+	memory@88000000 {
+		device_type = "memory";
 		reg = <0x88000000 0x400000>;
 	};
 
@@ -74,7 +75,7 @@
 			status = "ok";
 		};
 
-		boardfpga: boardfpga {
+		boardfpga: boardfpga@80000000 {
 			compatible = "efm32board";
 			reg = <0x80000000 0x400>;
 			irq-gpios = <&gpio 64 1>;
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index c747983..b78c57e 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -4,10 +4,14 @@
  * Documentation available from
  * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
  */
+
 #include "armv7-m.dtsi"
 #include "dt-bindings/clock/efm32-cmu.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 130e946..a70819b 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -24,7 +24,8 @@
 		stdout-path = &serial_2;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x1ff00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 8c89062..66f04f6 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -27,7 +27,8 @@
 		i2c7 = &i2c_max77836;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x1ff00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 40ea7de..ec331169 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -12,58 +12,46 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
-
-#define PIN_DRV_LV1		0
-#define PIN_DRV_LV2		2
-#define PIN_DRV_LV3		1
-#define PIN_DRV_LV4		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_IN(_pin, _pull, _drv)			\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <0>;		\
-		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_IN(_pin, _pull, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT(_pin, _drv)				\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <1>;		\
-		samsung,pin-pud = <0>;			\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_OUT(_pin, _drv)						\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT_SET(_pin, _val, _drv)			\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <1>;		\
-		samsung,pin-pud = <0>;			\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
-		samsung,pin-val = <_val>;		\
+#define PIN_OUT_SET(_pin, _val, _drv)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+		samsung,pin-val = <_val>;				\
 	}
 
-#define PIN_CFG(_pin, _sel, _pull, _drv)		\
-	_pin {						\
-		samsung,pins = #_pin;			\
-		samsung,pin-function = <_sel>;		\
-		samsung,pin-pud = <PIN_PULL_ ##_pull>;	\
-		samsung,pin-drv = <PIN_DRV_ ##_drv>;	\
+#define PIN_CFG(_pin, _sel, _pull, _drv)				\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <_sel>;				\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
@@ -125,158 +113,158 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	mipi0_clk: mipi0-clk {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -408,164 +396,164 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpk2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpk2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpk2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpk2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c0: fimc-is-i2c0 {
 		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c1: fimc-is-i2c1 {
 		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_uart: fimc-is-uart {
 		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index a9218136..3967ee5 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -27,7 +27,8 @@
 		i2c7 = &i2c_max77836;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x1ff00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 70e3ace..e9d2556 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -17,7 +17,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
@@ -25,6 +24,8 @@
 / {
 	compatible = "samsung,exynos3250";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 32f22e1..5f034eb 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,11 +21,12 @@
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
-#include "skeleton.dtsi"
 #include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		spi0 = &spi_0;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index be2751e..a2c6a13 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -24,7 +24,8 @@
 	model = "Insignal Origen evaluation board based on Exynos4210";
 	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x10000000
 		       0x50000000 0x10000000
 		       0x60000000 0x10000000
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 9331c62..d9b6d25 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -14,6 +14,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 / {
 	pinctrl@11400000 {
 		gpa0: gpa0 {
@@ -146,245 +148,245 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_data: uart2-data {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_a: uart-audio-a {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart3_data: uart3-data {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_b: uart-audio-b {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi0_bus: spi0-bus {
 			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c4_bus: i2c4-bus {
 			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi1_bus: spi1-bus {
 			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s1_bus: i2s1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm1_bus: pcm1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		ac97_bus: ac97-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s2_bus: i2s2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm2_bus: pcm2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spdif_bus: spdif-bus {
 			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c6_bus: i2c6-bus {
 			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi2_bus: spi2-bus {
 			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c0_bus: i2c0-bus {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c1_bus: i2c1-bus {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm0_out: pwm0-out {
 			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm1_out: pwm1-out {
 			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm2_out: pwm2-out {
 			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm3_out: pwm3-out {
 			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ctrl: lcd-ctrl {
 			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_sync: lcd-sync {
 			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_en: lcd-en {
 			samsung,pins = "gpe3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_clk: lcd-clk {
 			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data16: lcd-data-width16 {
@@ -392,9 +394,9 @@
 					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data18: lcd-data-width18 {
@@ -403,9 +405,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
 					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data24: lcd-data-width24 {
@@ -415,9 +417,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -569,263 +571,263 @@
 
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint8: ext-int8 {
 			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint15: ext-int15 {
 			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint16: ext-int16 {
 			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint31: ext-int31 {
 			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_clk_active: cam-port-a-clk-active {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_a_clk_idle: cam-port-a-clk-idle {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		hdmi_cec: hdmi-cec {
 			samsung,pins = "gpx3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -838,17 +840,17 @@
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm0_bus: pcm0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 847fae3..9c98a37 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -23,7 +23,8 @@
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
 	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -136,17 +137,17 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 79d98303..0ca1b4d 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -20,7 +20,8 @@
 	model = "Samsung Trats based on Exynos4210";
 	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000
 			0x60000000 0x10000000
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9a75e3e..0c89ea9 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -20,7 +20,8 @@
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
 	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000>;
 	};
@@ -269,7 +270,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	hdmi-en-supply = <&hdmi_en>;
@@ -521,16 +522,16 @@
 &pinctrl_1 {
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
 	i2c_ddc_bus: i2c-ddc-bus {
 		samsung,pins = "gpe4-2", "gpe4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 58ad48e7..8aa19ba 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -163,26 +163,26 @@
 
 /* RSTN signal for eMMC */
 &sd1_cd {
-	samsung,pin-pud = <0>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <1>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 };
 
@@ -227,7 +227,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index d73aa6c..99634c5 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -18,7 +18,8 @@
 	model = "Hardkernel ODROID-U3 board based on Exynos4412";
 	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7FF00000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 2af2351..61906b3 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -18,7 +18,8 @@
 	model = "Hardkernel ODROID-X board based on Exynos4412";
 	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x3FF00000>;
 	};
 
@@ -83,7 +84,7 @@
 &pinctrl_1 {
 	gpio_home_key: home_key {
 		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index 3e35842..4d22885 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -17,7 +17,8 @@
 	model = "Hardkernel ODROID-X2 board based on Exynos4412";
 	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7FF00000>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 26a36fe..a1ab6f9 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -22,7 +22,8 @@
 	model = "Insignal Origen evaluation board based on Exynos4412";
 	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -500,16 +501,16 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 231ffbd..7fcb434 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -20,7 +20,8 @@
 	model = "Samsung SMDK evaluation board based on Exynos4412";
 	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -115,17 +116,17 @@
 &pinctrl_1 {
 	keypad_rows: keypad-rows {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_cols: keypad-cols {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 4840bbd..5504398 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -23,7 +23,8 @@
 		stdout-path = &serial_0;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 129e973..41ecd6d 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -30,7 +30,8 @@
 		i2c12 = &i2c_max77693_fuel;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 75af9c5..76cfd87 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -11,6 +11,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -94,180 +96,180 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -392,165 +394,165 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpk2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpk2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpk2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpk2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c0: fimc-is-i2c0 {
 		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_i2c1: fimc-is-i2c1 {
 		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	fimc_is_uart: fimc-is-uart {
 		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -566,8 +568,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 28b04b6..3c40f8a 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -16,13 +16,14 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/exynos4415.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
 	compatible = "samsung,exynos4415";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 856b292..a56bf9b 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -12,20 +12,13 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+#include <dt-bindings/pinctrl/samsung.h>
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 / {
@@ -136,245 +129,245 @@
 
 		uart0_data: uart0-data {
 			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart0_fctl: uart0-fctl {
 			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_data: uart1-data {
 			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart1_fctl: uart1-fctl {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c2_bus: i2c2-bus {
 			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_data: uart2-data {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart2_fctl: uart2-fctl {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_a: uart-audio-a {
 			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c3_bus: i2c3-bus {
 			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart3_data: uart3-data {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		uart_audio_b: uart-audio-b {
 			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi0_bus: spi0-bus {
 			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c4_bus: i2c4-bus {
 			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi1_bus: spi1-bus {
 			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c5_bus: i2c5-bus {
 			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s1_bus: i2s1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm1_bus: pcm1-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		ac97_bus: ac97-bus {
 			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2s2_bus: i2s2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm2_bus: pcm2-bus {
 			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spdif_bus: spdif-bus {
 			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c6_bus: i2c6-bus {
 			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		spi2_bus: spi2-bus {
 			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm0_out: pwm0-out {
 			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm1_out: pwm1-out {
 			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ctrl: lcd-ctrl {
 			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c7_bus: i2c7-bus {
 			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm2_out: pwm2-out {
 			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pwm3_out: pwm3-out {
 			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c0_bus: i2c0-bus {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		mipi0_clk: mipi0-clk {
 			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		i2c1_bus: i2c1-bus {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		mipi1_clk: mipi1-clk {
 			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_clk: lcd-clk {
 			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data16: lcd-data-width16 {
@@ -382,9 +375,9 @@
 					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data18: lcd-data-width18 {
@@ -393,9 +386,9 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
 					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_data24: lcd-data-width24 {
@@ -405,39 +398,39 @@
 					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		lcd_ldi: lcd-ldi {
 			samsung,pins = "gpf3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_a_clk_active: cam-port-a-clk-active {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_a_clk_idle: cam-port-a-clk-idle {
 			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -613,284 +606,284 @@
 
 		sd0_clk: sd0-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		cam_port_b_clk_active: cam-port-b-clk-active {
 			samsung,pins = "gpm2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 		};
 
 		cam_port_b_clk_idle: cam-port-b-clk-idle {
 			samsung,pins = "gpm2-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint8: ext-int8 {
 			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint15: ext-int15 {
 			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint16: ext-int16 {
 			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		eint31: ext-int31 {
 			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_i2c0: fimc-is-i2c0 {
 			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_i2c1: fimc-is-i2c1 {
 			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		fimc_is_uart: fimc-is-uart {
 			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		hdmi_cec: hdmi-cec {
 			samsung,pins = "gpx3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -906,17 +899,17 @@
 		i2s0_bus: i2s0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 
 		pcm0_bus: pcm0-bus {
 			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 
@@ -971,9 +964,9 @@
 					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
 					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
 					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+			samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+			samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index c452499..3394bdc 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -157,7 +157,9 @@
 				 <&clock CLK_MOUT_MPLL_USER_T>,
 				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
 				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_GICISP>, <&clock CLK_MCUCTL_ISP>,
+				 <&clock CLK_PWM_ISP>,
+				 <&clock CLK_DIV_ISP0>, <&clock CLK_DIV_ISP1>,
 				 <&clock CLK_DIV_MCUISP0>,
 				 <&clock CLK_DIV_MCUISP1>,
 				 <&clock CLK_UART_ISP_SCLK>,
@@ -167,6 +169,7 @@
 			clock-names = "lite0", "lite1", "ppmuispx",
 				      "ppmuispmx", "mpll", "isp",
 				      "drc", "fd", "mcuisp",
+				      "gicisp", "mcuctl_isp", "pwm_isp",
 				      "ispdiv0", "ispdiv1", "mcuispdiv0",
 				      "mcuispdiv1", "uart", "aclk200",
 				      "div_aclk200", "aclk400mcuisp",
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index cab9178..8f06609 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,11 +13,12 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c_0;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index ea70603..6098dacd 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -20,7 +20,8 @@
 	model = "Insignal Arndale evaluation board based on EXYNOS5250";
 	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -152,7 +153,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 880917e..2f6ab32 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -200,392 +202,392 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_hs_bus: i2c2-hs-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c3_hs_bus: i2c3-hs-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ac97_bus: ac97-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_hs_bus: i2c0-hs-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_hs_bus: i2c1-hs-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus8: sd2-bus-width8 {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_clk: sd3-clk {
 		samsung,pins = "gpc4-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cmd: sd3-cmd {
 		samsung,pins = "gpc4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cd: sd3-cd {
 		samsung,pins = "gpc4-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus1: sd3-bus-width1 {
 		samsung,pins = "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus4: sd3-bus-width4 {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	dp_hpd: dp_hpd {
 		samsung,pins = "gpx0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -666,52 +668,52 @@
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c2_bus: cam-i2c2-bus {
 		samsung,pins = "gpe0-6", "gpe1-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_bayrgb_bus: cam-bayrgb-bus {
@@ -720,18 +722,18 @@
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
 			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
 			       "gpg2-0", "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a: cam-port-a {
 		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
 			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
 			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -781,9 +783,9 @@
 			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
 			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	c2c_txd: c2c-txd {
@@ -791,9 +793,9 @@
 			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
 			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
 			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -809,8 +811,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 381af13..a97a785 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -22,7 +22,8 @@
 	aliases {
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -116,7 +117,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
 
 &i2c_0 {
@@ -416,8 +417,8 @@
 &pinctrl_0 {
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index fadbea7..d5d5191 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -19,7 +19,8 @@
 		i2c104 = &i2c_104;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -260,7 +261,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;
@@ -440,7 +441,7 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
@@ -572,81 +573,81 @@
 &pinctrl_0 {
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	wifi_rst: wifi-rst {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	usb3_vbus_en: usb3-vbus-en {
 		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	arb_their_claim: arb-their-claim {
 		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	arb_our_claim: arb-our-claim {
 		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -657,16 +658,16 @@
 };
 
 &sd3_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd3_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index f811dc8..90560c3 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -40,8 +40,8 @@
 &pinctrl_0 {
 	max98090_irq: max98090-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 995c7ce..df48f2c 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -36,8 +36,8 @@
 &pinctrl_0 {
 	max98095_en: max98095-en {
 		samsung,pins = "gpx1-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index 44f4292..4d7bdb7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -20,7 +20,8 @@
 	model = "Google Spring";
 	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -91,7 +92,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	phy = <&hdmiphy>;
@@ -357,7 +358,7 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
@@ -460,92 +461,92 @@
 &pinctrl_0 {
 	s5m8767_dvs: s5m8767-dvs {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp-hpd-gpio {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	s5m8767_ds: s5m8767-ds {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	s5m8767_irq: s5m8767-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	hsic_reset: hsic-reset {
 		samsung,pins = "gpe1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &sd1_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cd {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index f6ee55e..1b911a2 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -12,9 +12,7 @@
  * published by the Free Software Foundation.
 */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	3
+#include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
 	gpa0: gpa0 {
@@ -187,217 +185,217 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	usb3_vbus0_en: usb3-vbus0-en {
 		samsung,pins = "gpa2-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spdif1_bus: spdif1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c0_hs_bus: i2c0-hs-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c1_hs_bus: i2c1-hs-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c2_hs_bus: i2c2-hs-bus {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c3_hs_bus: i2c3-hs-bus {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c4_bus: i2c4-bus {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c5_bus: i2c5-bus {
 		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c6_bus: i2c6-bus {
 		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c7_bus: i2c7-bus {
 		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c8_bus: i2c8-bus {
 		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c9_bus: i2c9-bus {
 		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c10_bus: i2c10-bus {
 		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	i2c11_bus: i2c11-bus {
 		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_a: cam-gpio-a {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
@@ -444,114 +442,114 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd0_rdqs: sd0-rdqs {
 		samsung,pins = "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 3daef94..d0cc300 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -16,7 +16,8 @@
 	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
 	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -42,9 +43,9 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 36da38e..a86a489 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -9,13 +9,13 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
-
 #include <dt-bindings/clock/exynos5260-clk.h>
 
 / {
 	compatible = "samsung,exynos5260", "samsung,exynos5";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index d949931..3c271cb 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -21,12 +21,13 @@
 	model = "Hardkernel Odroid XU";
 	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7ea00000>;
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	emmc_pwrseq: pwrseq {
@@ -447,14 +448,11 @@
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
-	samsung,dw-mshc-hs400-timing = <0 2>;
-	samsung,read-strobe-delay = <90>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
 	vmmc-supply = <&ldo20_reg>;
 	vqmmc-supply = <&ldo11_reg>;
 };
@@ -476,38 +474,38 @@
 &pinctrl_0 {
 	emmc_nrst_pin: emmc-nrst {
 		samsung,pins = "gpd1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index b58a0f2..a083d23 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -9,6 +9,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -280,212 +282,212 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c4_hs_bus: i2c4-hs-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c5_hs_bus: i2c5-hs-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c6_hs_bus: i2c6-hs-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c7_hs_bus: i2c7-hs-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 777fcf2..6cc74d9 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -16,7 +16,8 @@
 	model = "Samsung SMDK5410 board based on EXYNOS5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
@@ -66,8 +67,8 @@
 	srom_ctl: srom-ctl {
 		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
 			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	srom_ebi: srom-ebi {
@@ -77,9 +78,9 @@
 			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
 			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
 			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 39a3b81..9cc83c5 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -22,7 +22,8 @@
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
 	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -70,6 +71,15 @@
 	status = "disabled";
 };
 
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";
 
@@ -347,6 +357,10 @@
 	};
 };
 
+&i2c_2 {
+	status = "okay";
+};
+
 &mmc_0 {
 	status = "okay";
 	broken-cd;
@@ -378,9 +392,9 @@
 &pinctrl_0 {
 	s2mps11_irq: s2mps11-irq {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index fe4e091..ec4a00f 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -79,7 +79,8 @@
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -179,7 +180,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -753,171 +754,171 @@
 
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max98090_irq: max98090-irq {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 	mask_tpm_reset: mask-tpm-reset {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	/* Adjust WiFi drive strengths lower for EMI */
 	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 };
 
 &pinctrl_2 {
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_3 {
 	/* Drive SPI lines at x2 for better integrity */
 	spi2-bus {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	/* Drive SPI chip select at x2 for better integrity */
 	ec_spi_cs: ec-spi-cs {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_selb: pmic-selb {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 14beb7e..3924b4f 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	gpy7: gpy7 {
 		gpio-controller;
@@ -61,9 +63,9 @@
 
 	dp_hpd: dp_hpd {
 		samsung,pins = "gpx0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -153,135 +155,135 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpc0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd0_rclk: sd0-rclk {
 		samsung,pins = "gpc0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_int: sd1-int {
 		samsung,pins = "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpc1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 };
 
@@ -354,52 +356,52 @@
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_gpio_b: cam-gpio-b {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c2_bus: cam-i2c2-bus {
 		samsung,pins = "gpf0-4", "gpf0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_spi1_bus: cam-spi1-bus {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c1_bus: cam-i2c1-bus {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_i2c0_bus: cam-i2c0-bus {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_spi0_bus: cam-spi0-bus {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	cam_bayrgb_bus: cam-bayrgb-bus {
@@ -408,9 +410,9 @@
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
 			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
 			       "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -489,216 +491,216 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c3_bus: i2c3-bus {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c4_hs_bus: i2c4-hs-bus {
 		samsung,pins = "gpa2-0", "gpa2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c5_hs_bus: i2c5-hs-bus {
 		samsung,pins = "gpa2-2", "gpa2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpb1-0", "gpb1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c6_hs_bus: i2c6-hs-bus {
 		samsung,pins = "gpb1-3", "gpb1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpb2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpb2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpb2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpb2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c7_hs_bus: i2c7-hs-bus {
 		samsung,pins = "gpb2-2", "gpb2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c8_hs_bus: i2c8-hs-bus {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c9_hs_bus: i2c9-hs-bus {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	i2c10_hs_bus: i2c10-hs-bus {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -714,8 +716,8 @@
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index ed8f342..aaccd0d 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -19,7 +19,8 @@
 	model = "Samsung SMDK5420 board based on EXYNOS5420";
 	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -130,7 +131,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 };
@@ -386,25 +387,25 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_2 {
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gpg0-5";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gpg1-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index d562530..246d298 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -21,12 +21,13 @@
 #include "exynos-mfc-reserved-memory.dtsi"
 
 / {
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x7EA00000>;
 	};
 
 	chosen {
-		linux,stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
 	firmware@02073000 {
@@ -250,7 +251,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 
@@ -548,25 +549,25 @@
 &pinctrl_0 {
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	s2mps11_irq: s2mps11-irq {
 		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	emmc_nrst_pin: emmc-nrst {
 		samsung,pins = "gpd1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index a98501b..ad6f533b 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -20,6 +20,12 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
+	/* FIXME: set reg property with correct start address and size */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	fixed-rate-clocks {
 		xtal {
 			compatible = "samsung,clock-xtal";
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 6a0d802..92bd2c6 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -21,6 +21,12 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
+	/* FIXME: set reg property with correct start address and size */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	fixed-rate-clocks {
 		xtal {
 			compatible = "samsung,clock-xtal";
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index fd17681..e6bffd1 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,12 +10,13 @@
 */
 
 #include <dt-bindings/clock/exynos5440.h>
-#include "skeleton.dtsi"
 
 / {
 	compatible = "samsung,exynos5440", "samsung,exynos5";
 
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &serial_0;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 06a6049..9d31cdc 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -14,7 +14,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos5.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 5ec71e2..01f4668 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -79,7 +79,8 @@
 
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -179,7 +180,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -722,171 +723,171 @@
 
 	wifi_en: wifi-en {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max98091_irq: max98091-irq {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 	mask_tpm_reset: mask-tpm-reset {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
 	tpm_irq: tpm-irq {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	trackpad_irq: trackpad-irq {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	power_key_irq: power-key-irq {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	ec_irq: ec-irq {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	tps65090_irq: tps65090-irq {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	dp_hpd_gpio: dp_hpd_gpio {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	max77802_irq: max77802-irq {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	lid_irq: lid-irq {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	hdmi_hpd_irq: hdmi-hpd-irq {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_1: pmic-dvs-1 {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
 	/* Adjust WiFi drive strengths lower for EMI */
 	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 };
 
 &pinctrl_2 {
 	pmic_dvs_2: pmic-dvs-2 {
 		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_dvs_3: pmic-dvs-3 {
 		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_3 {
 	/* Drive SPI lines at x2 for better integrity */
 	spi2-bus {
-		samsung,pin-drv = <2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	/* Drive SPI chip select at x2 for better integrity */
 	ec_spi_cs: ec-spi-cs {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
 	usb300_vbus_en: usb300-vbus-en {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	usb301_vbus_en: usb301-vbus-en {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	pmic_selb: pmic-selb {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 490b7b4..f812d58 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -309,6 +309,13 @@
 				status = "disabled";
 			};
 
+			iim@53ff0000 {
+				compatible = "fsl,imx35-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 80>;
+			};
+
 			usbotg: usb@53ff4000 {
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index e245713..8fe8bee 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -227,6 +227,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 151 28>;
 			};
 
 			gpio2: gpio@53f88000 {
@@ -237,6 +238,10 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
+					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
+					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
+					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
 			};
 
 			gpio3: gpio@53f8c000 {
@@ -247,6 +252,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 108 32>;
 			};
 
 			gpio4: gpio@53f90000 {
@@ -257,6 +263,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
+					      <&iomuxc 20 140 11>;
 			};
 
 			wdog1: wdog@53f98000 {
@@ -346,6 +354,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
 			};
 
 			gpio6: gpio@53fe0000 {
@@ -356,6 +365,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
 			};
 
 			i2c3: i2c@53fec000 {
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
new file mode 100644
index 0000000..6782d7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -0,0 +1,224 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index cd17037..0777b41 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -136,6 +136,14 @@
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu_di0: port@2 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -217,6 +225,8 @@
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 					         <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -498,6 +508,8 @@
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 				         <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -508,6 +520,8 @@
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 				         <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -591,6 +605,8 @@
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
 				         <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
@@ -621,6 +637,8 @@
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
 				         <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
new file mode 100644
index 0000000..59b8afc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2becd7c..75d7343 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -376,18 +376,18 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
 			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
new file mode 100644
index 0000000..85eddeb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-ts4900.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 9a4c22c..1ade195 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -111,6 +111,59 @@
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 151 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
 &gpt {
 	compatible = "fsl,imx6dl-gpt";
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index d8acf15..4989d0b 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -79,19 +79,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
index f0a2be5..78bfc1a 100644
--- a/arch/arm/boot/dts/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -89,3 +89,19 @@
 		};
 	};
 };
+
+&pca9539 {
+	P04 {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P05 {
+		gpio-hog;
+		gpios = <5 0>;
+		output-low;
+		line-name = "PCA9539-P05";
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
index 33cb71a..d853887 100644
--- a/arch/arm/boot/dts/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -89,3 +89,12 @@
 		};
 	};
 };
+
+&pca9539 {
+	P05 {
+		gpio-hog;
+		gpios = <5 0>;
+		output-low;
+		line-name = "PCA9539-P05";
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index f2adc60..308e11c 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -448,19 +448,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			/* FEC Reset */
 			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
 			/* AR8033 Interrupt */
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index cf3fd31..e4a415f 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -183,6 +183,76 @@
 				interrupt-controller;
 				interrupt-parent = <&gpio2>;
 				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P06 {
+					gpio-hog;
+					gpios = <6 0>;
+					output-low;
+					line-name = "PCA9539-P06";
+				};
+
+				P07 {
+					gpio-hog;
+					gpios = <7 0>;
+					output-low;
+					line-name = "PCA9539-P07";
+				};
+
+				P10 {
+					gpio-hog;
+					gpios = <8 0>;
+					output-low;
+					line-name = "PCA9539-P10";
+				};
+
+				P11 {
+					gpio-hog;
+					gpios = <9 0>;
+					output-low;
+					line-name = "PCA9539-P11";
+				};
+
+				P12 {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13 {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14 {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15 {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16 {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17 {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index b5de7e6..59bc5a4 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -168,18 +168,18 @@
 
 	pinctrl_enet: enetgrp {
 		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 9059073..908dab6 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -324,18 +324,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 4fa5601..6de21ff 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -139,6 +139,9 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio1 25 0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -303,21 +306,22 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 0511137..747bc10 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -421,18 +421,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
new file mode 100644
index 0000000..e9c224c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 3f8013c..f7995c5 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -252,26 +252,26 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
 			/* AR8035 pin strapping: IO voltage: pull up */
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
 			/* AR8035 pin strapping: PHYADDR#0: pull down */
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
 			/* AR8035 pin strapping: PHYADDR#1: pull down */
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
 			/* AR8035 pin strapping: MODE#1: pull up */
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
 			/* AR8035 pin strapping: MODE#3: pull up */
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 			/* AR8035 pin strapping: MODE#0: pull down */
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
 			/* GPIO16 -> AR8035 25MHz */
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* RGMII_nRST */
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 5acd0c6..1723e89e 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -549,12 +549,12 @@
 			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
 			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			/* Ethernet reset */
 			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
index 86cf093..2557330 100644
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -31,19 +31,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index d7c8ccb..06f492e1 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -284,19 +284,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
 		>;
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
new file mode 100644
index 0000000..9b81ebc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ts4900.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index c30c836..e9a5d0b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -209,6 +209,43 @@
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
 &hdmi {
 	compatible = "fsl,imx6q-hdmi";
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 315e033f..99e323b 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -586,19 +586,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 			/* Ethernet PHY reset */
 			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
 			/* Ethernet PHY interrupt */
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index da1341d..b2c083d 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -67,18 +67,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 9d7ab6c..afec2c7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -228,22 +228,28 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw51xx {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -364,5 +370,11 @@
 				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 7191b84..a7100f9 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -315,6 +315,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -353,6 +355,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw52xx {
 		pinctrl_audmux: audmuxgrp {
@@ -376,18 +384,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -487,6 +495,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -549,5 +558,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 40d06b0..8953eba 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -312,6 +312,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +353,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw53xx {
 		pinctrl_audmux: audmuxgrp {
@@ -365,18 +373,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -476,6 +484,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -539,5 +548,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index d6dbe2a..6ac41c7 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -414,6 +414,8 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -453,6 +455,17 @@
 	status = "okay";
 };
 
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	imx6qdl-gw54xx {
 		pinctrl_audmux: audmuxgrp {
@@ -467,18 +480,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -592,6 +605,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
 			>;
 		};
 
@@ -654,5 +668,11 @@
 				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 118bea5..4b9fef8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -239,6 +239,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw51xx {
 		pinctrl_flexcan1: flexcan1grp {
@@ -333,5 +339,11 @@
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index f27f184..805e236 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -197,6 +197,12 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
 	imx6qdl-gw552x {
 		pinctrl_gpio_leds: gpioledsgrp {
@@ -286,5 +292,11 @@
 				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
 			>;
                 };
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
new file mode 100644
index 0000000..86cec05
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -0,0 +1,433 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P0V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index f8d945a..d5c3aa8 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -254,19 +254,19 @@
 		fsl,pins = <
 			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
 			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
 			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
 			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
 		>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index cfd50ea..880bd78 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -361,12 +361,12 @@
 				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
 				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 9677bf3..b0b3220 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -484,19 +484,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 97d9c33..db868bc 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -394,19 +394,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index d6d98d4..e0280cac2 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -231,19 +231,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
 			>;
 		};
@@ -379,6 +379,18 @@
 	status = "disabled";
 };
 
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index cacf593..17704a5 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -196,19 +196,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				/* Phy reset */
 				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 6aa193f..e000e6f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -345,19 +345,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index f65fdfc..81dd6cd 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -359,19 +359,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index d77ea94..8e9e0d9 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -380,19 +380,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
new file mode 100644
index 0000000..5c26b26
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
@@ -0,0 +1,481 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpio = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 3bee2f9..c96c91d 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -132,18 +132,18 @@
 	imx6q-udoo {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 3ffe00c..2b9c2be 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -109,19 +109,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b620ac8..b13b0b2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -243,7 +243,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 5425150..02378db 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -375,6 +375,12 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -386,6 +392,13 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -397,6 +410,14 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -408,6 +429,21 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -419,6 +455,17 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
 			};
 
 			kpp: kpp@020b8000 {
diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h
index bb9c6b7..42c4c80 100644
--- a/arch/arm/boot/dts/imx6sx-pinfunc.h
+++ b/arch/arm/boot/dts/imx6sx-pinfunc.h
@@ -308,6 +308,20 @@
 #define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
 #define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
 #define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+/*
+ * SION bit is necessary for ENET1_REF_CLK1 (ENET2_REF_CLK2 untested) if it is
+ * used as clock output of IMX6SX_CLK_ENET_REF (ENET1_TX_CLK) to e.g. supply a
+ * PHY in RMII mode. This configuration is valid if:
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK is set
+ *  - bit 1 in field IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK unset
+ * It seems to be a silicon bug that in this configuration ENET1_TX reference
+ * clock isn't provided automatically.  According to i.MX6SX reference manual
+ * (IOMUXC_GPR_GPR1 field descriptions: ENET1_CLK_SEL, Rev. 0 from 2/2015) it
+ * should be the case.
+ * So this might have unwanted side effects for other hardware units that are
+ * also connected to that pin and using respective function as input (e.g.
+ * UART1's DTR handling on MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B).
+ */
 #define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
 #define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
 #define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 96ea936..240a286 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -64,7 +64,7 @@
 	cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakup;
+	wakeup-source;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 2863c52..1a473e8 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -159,6 +159,16 @@
 			arm,data-latency = <4 2 3>;
 		};
 
+		gpu: gpu@01800000 {
+			compatible = "vivante,gc";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>,
+				 <&clks IMX6SX_CLK_GPU>;
+			clock-names = "bus", "core", "shader";
+		};
+
 		dma_apbh: dma-apbh@01804000 {
 			compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
@@ -438,6 +448,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 26>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -449,6 +460,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 31 20>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -460,6 +472,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 51 29>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -471,6 +484,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 80 32>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -482,6 +496,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 112 24>;
 			};
 
 			gpio6: gpio@020b0000 {
@@ -493,6 +508,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 136 12>, <&iomuxc 12 158 11>;
 			};
 
 			gpio7: gpio@020b4000 {
@@ -504,6 +520,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>;
 			};
 
 			kpp: kpp@020b8000 {
@@ -1273,4 +1290,9 @@
 			status = "disabled";
 		};
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts
new file mode 100644
index 0000000..4c4af76
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6ul-geam.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&lcdif {
+	display = <&display0>;
+	status = "okay";
+
+	display0: display {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <28000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <30>;
+				hback-porch = <30>;
+				hsync-len = <64>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				vsync-len = <20>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	status = "okay";
+};
+
+&tsc {
+	measure-delay-time = <0x1ffff>;
+	pre-charge-time = <0x1fff>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi
new file mode 100644
index 0000000..64eb9ed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-geam.dtsi
@@ -0,0 +1,361 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	memory {
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	display = <&display0>;
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0		/* ENET_nRST */
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pin = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01	0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK     0x17070
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD     0x10070
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0  0x17070
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1  0x17070
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2  0x17070
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3  0x17070
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
index 86f68fa..827d9e8 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -100,6 +100,18 @@
 		gpio = <&gpio1 6 0>;
 	};
 
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx6ul-sgtl5000";
@@ -325,12 +337,27 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	no-1-8-v;
+	non-removable;
 	keep-power-in-suspend;
 	wakeup-source;
+	vmmc-supply = <&reg_brcm>;
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA06__GPIO4_IO08	0x10b0	/* WL_REG_ON */
+			MX6UL_PAD_NAND_DATA04__GPIO4_IO06	0x10b0	/* WL_HOST_WAKE */
+		>;
+	};
+
 	pinctrl_enet2: enet2grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO	0x1b0b0
@@ -513,4 +540,10 @@
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 33b95d7..c5c05fd 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -411,6 +411,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
 			};
 
 			gpio2: gpio@020a0000 {
@@ -422,6 +424,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
 			};
 
 			gpio3: gpio@020a4000 {
@@ -433,6 +436,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
 			};
 
 			gpio4: gpio@020a8000 {
@@ -444,6 +448,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
 			};
 
 			gpio5: gpio@020ac000 {
@@ -455,6 +460,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
 			};
 
 			fec2: ethernet@020b4000 {
@@ -644,7 +650,8 @@
 			};
 
 			gpr: iomuxc-gpr@020e4000 {
-				compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x020e4000 0x4000>;
 			};
 
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 1545661..373ee19 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -138,10 +138,6 @@
 };
 
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
-	no-1-8-v;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 	keep-power-in-suspend;
 	wakeup-source;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 0a9d3a8..a9cc657 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -46,12 +46,18 @@
 		pwms = <&pwm1 0 5000000>;
 	};
 
-	reg_3p3v: regulator-3p3v {
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
 	};
 
 	reg_vref_1v8: regulator-vref-1v8 {
@@ -60,6 +66,22 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
 };
 
 &adc1 {
@@ -97,6 +119,18 @@
 	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
 	status = "okay";
 
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&reg_module_3v3_avdd>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&reg_DCDC3>;
+	};
+
 	ad7879@2c {
 		compatible = "adi,ad7879-1";
 		reg = <0x2c>;
@@ -217,6 +251,12 @@
 	vin-supply = <&reg_DCDC3>;
 };
 
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "disabled";
 };
@@ -251,6 +291,14 @@
 	dr_mode = "host";
 };
 
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
@@ -528,13 +576,18 @@
 
 	pinctrl_sai1: sai1-grp {
 		fsl,pins = <
-			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
 			MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK     0x1f
 			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
 			MX7D_PAD_ENET1_COL__SAI1_TX_DATA0	0x30
 			MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0	0x1f
 		>;
 	};
+
+	pinctrl_sai1_mclk: sai1grp_mclk {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
 };
 
 &iomuxc_lpsr {
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 95ee268..2f33c46 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -131,7 +131,7 @@
 		ti,y-min = /bits/ 16 <0>;
 		ti,y-max = /bits/ 16 <0>;
 		ti,pressure-max = /bits/ 16 <0>;
-		ti,x-plat-ohms = /bits/ 16 <400>;
+		ti,x-plate-ohms = /bits/ 16 <400>;
 		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 51c13cb..f6dee41 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -45,30 +45,42 @@
 
 / {
 	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-frequency = <996000000>;
+		};
+
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clock-frequency = <996000000>;
 		};
 	};
 
-	etm@3007d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007d000 0x1000>;
+	soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
 
-		/*
-		 * System will hang if added nosmp in kernel command line
-		 * without arm,primecell-periphid because amba bus try to
-		 * read id and core1 power off at this time.
-		 */
-		arm,primecell-periphid = <0xbb956>;
-		cpu = <&cpu1>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		port {
-			etm1_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port1>;
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
new file mode 100644
index 0000000..0345267
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -0,0 +1,446 @@
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <fabio.estevam@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Warp i.MX7 Board";
+	compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B	0x74
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1e90bdb..0d7d5ac 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -85,26 +85,12 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
-			operating-points = <
-				/* KHz	uV */
-				996000	1075000
-				792000	975000
-			>;
+			clock-frequency = <792000000>;
 			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
 	ckil: clock-cki {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -119,195 +105,205 @@
 		clock-output-names = "osc";
 	};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
 		interrupt-parent = <&intc>;
-	};
+		ranges;
+
+		funnel@30041000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-	etr@30086000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30086000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+			ca_funnel_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-		port {
-			etr_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					ca_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* funnel output port */
+				port@2 {
+					reg = <0>;
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+
+				/* the other input ports are not connect to anything */
 			};
 		};
-	};
 
-	tpiu@30087000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0x30087000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port0>;
+				};
 			};
 		};
-	};
 
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-replicator";
+		funnel@30083000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
 				};
-			};
 
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						slave-mode; /* M4 input */
+					};
 				};
-			};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etf_out_port>;
+				port@2 {
+					reg = <0>;
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
 				};
+
+				/* the other input ports are not connect to anything */
 			};
 		};
-	};
 
-	etf@30084000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30084000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			port@0 {
-				reg = <0>;
-				etf_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&hugo_funnel_out_port0>;
+				port@0 {
+					reg = <0>;
+					etf_in_port: endpoint {
+						slave-mode;
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
 				};
-			};
 
-			port@1 {
-				reg = <0>;
-				etf_out_port: endpoint {
-					remote-endpoint = <&replicator_in_port0>;
+				port@1 {
+					reg = <0>;
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
 				};
 			};
 		};
-	};
-
-	funnel@30083000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30083000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				hugo_funnel_in_port0: endpoint {
+			port {
+				etr_in_port: endpoint {
 					slave-mode;
-					remote-endpoint = <&ca_funnel_out_port0>;
+					remote-endpoint = <&replicator_out_port1>;
 				};
 			};
+		};
 
-			port@1 {
-				reg = <1>;
-				hugo_funnel_in_port1: endpoint {
-					slave-mode; /* M4 input */
-				};
-			};
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-			port@2 {
-				reg = <0>;
-				hugo_funnel_out_port0: endpoint {
-					remote-endpoint = <&etf_in_port>;
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
 				};
 			};
-
-			/* the other input ports are not connect to anything */
 		};
-	};
 
-	funnel@30041000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30041000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		replicator {
+			/*
+			 * non-configurable replicators don't show up on the
+			 * AMBA bus.  As such no need to add "arm,primecell"
+			 */
+			compatible = "arm,coresight-replicator";
 
-		ca_funnel_ports: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				ca_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
+				/* replicator output ports */
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
 				};
-			};
 
-			/* funnel output port */
-			port@2 {
-				reg = <0>;
-				ca_funnel_out_port0: endpoint {
-					remote-endpoint = <&hugo_funnel_in_port0>;
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
 				};
-			};
 
-			/* the other input ports are not connect to anything */
+				/* replicator input port */
+				port@2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
 		};
-	};
 
-	etm@3007c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007c000 0x1000>;
-		cpu = <&cpu0>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port0>;
-			};
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x2000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
 		};
-	};
 
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
 
 		aips1: aips-bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
@@ -325,6 +321,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc_lpsr 0 0 8>, <&iomuxc 8 5 8>;
 			};
 
 			gpio2: gpio@30210000 {
@@ -336,6 +333,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 13 32>;
 			};
 
 			gpio3: gpio@30220000 {
@@ -347,6 +345,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 45 29>;
 			};
 
 			gpio4: gpio@30230000 {
@@ -358,6 +357,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 74 24>;
 			};
 
 			gpio5: gpio@30240000 {
@@ -369,6 +369,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 98 18>;
 			};
 
 			gpio6: gpio@30250000 {
@@ -380,6 +381,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 116 23>;
 			};
 
 			gpio7: gpio@30260000 {
@@ -391,6 +393,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 139 16>;
 			};
 
 			wdog1: wdog@30280000 {
@@ -723,6 +726,51 @@
 				status = "disabled";
 			};
 
+			sai1: sai@308a0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI1_IPG_CLK>,
+					 <&clks IMX7D_SAI1_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 8 24 0>, <&sdma 9 24 0>;
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI2_IPG_CLK>,
+					 <&clks IMX7D_SAI2_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 10 24 0>, <&sdma 11 24 0>;
+				status = "disabled";
+			};
+
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx7d-sai", "fsl,imx6sx-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SAI3_IPG_CLK>,
+					 <&clks IMX7D_SAI3_ROOT_CLK>,
+					 <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "rx", "tx";
+				dmas = <&sdma 12 24 0>, <&sdma 13 24 0>;
+				status = "disabled";
+			};
+
 			flexcan1: can@30a00000 {
 				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
 				reg = <0x30a00000 0x10000>;
@@ -911,6 +959,17 @@
 				status = "disabled";
 			};
 
+			sdma: sdma@30bd0000 {
+				compatible = "fsl,imx7d-sdma", "fsl,imx35-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_SDMA_CORE_CLK>,
+					 <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
 			fec1: ethernet@30be0000 {
 				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 4b34b54..6f16d09 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -19,7 +19,7 @@
 		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
 	};
 
-	/* 24 MHz chrystal on the core module */
+	/* 24 MHz chrystal on the Integrator/AP development board */
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -39,6 +39,34 @@
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
+		clocks = <&xtal24mhz>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		cm24mhz: cm24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/* Oscillator on the core module, clocks the CPU core */
+		cmosc: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorap-cm";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, 32.369MHz at boot */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
+		};
 	};
 
 	syscon {
@@ -47,6 +75,27 @@
 		interrupt-parent = <&pic>;
 		/* These are the logical module IRQs */
 		interrupts = <9>, <10>, <11>, <12>;
+
+		/*
+		 * SYSCLK clocks PCIv3 bridge, system controller and the
+		 * logic modules.
+		 */
+		sysclk: apsys@24M {
+			compatible = "arm,syscon-icst525-integratorap-sys";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
+		pciclk: pciclk@24M {
+			compatible = "arm,syscon-icst525-integratorap-pci";
+			#clock-cells = <0>;
+			lock-offset = <0x1c>;
+			vco-offset = <0x04>;
+			clocks = <&xtal24mhz>;
+		};
 	};
 
 	timer0: timer@13000000 {
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 79430fb..1b5e4b0 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -58,20 +58,37 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		xtal24mhz: xtal24mhz@24M {
+		cm24mhz: cm24mhz@24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
-		/*
-		 * External oscillator on the core module, usually used
-		 * to drive video circuitry. Driven from the 24MHz clock.
-		 */
-		auxosc: cm_aux_osc@25M {
+		/* Oscillator on the core module, clocks the CPU core */
+		cmcore: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Oscillator on the core module, clocks the memory bus */
+		cmmem: cmosc@24M {
+			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			#clock-cells = <0>;
+			lock-offset = <0x14>;
+			vco-offset = <0x08>;
+			clocks = <&cm24mhz>;
+		};
+
+		/* Auxilary oscillator on the core module, clocks the CLCD */
+		auxosc: auxosc@24M {
+			compatible = "arm,syscon-icst525";
 			#clock-cells = <0>;
-			compatible = "arm,integrator-cm-auxosc";
-			clocks = <&xtal24mhz>;
+			lock-offset = <0x14>;
+			vco-offset = <0x1c>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
@@ -80,7 +97,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <3>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
@@ -89,7 +106,7 @@
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
 			clock-mult = <1>;
-			clocks = <&xtal24mhz>;
+			clocks = <&cm24mhz>;
 		};
 	};
 
@@ -209,7 +226,42 @@
 			reg = <0xC0000000 0x1000>;
 			interrupts = <22>;
 			clocks = <&auxosc>, <&pclk>;
-			clock-names = "clcd", "apb_pclk";
+			clock-names = "clcdclk", "apb_pclk";
+
+			port {
+				/*
+				 * The VGA connected is implemented with a
+				 * THS8134A triple DAC that can be run in 24bit
+				 * or 16bit RGB mode.
+				 */
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				/* Standard 640x480 VGA timings */
+				panel-timing {
+					clock-frequency = <25175000>;
+					hactive = <640>;
+					hback-porch = <48>;
+					hfront-porch = <16>;
+					hsync-len = <96>;
+					vactive = <480>;
+					vback-porch = <33>;
+					vfront-porch = <10>;
+					vsync-len = <2>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 4c32ebc..ae1ebe7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -47,18 +47,26 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &usb1_phy {
 	status = "okay";
 };
 
-&usb1 {
+&keystone_usb1 {
 	status = "okay";
 };
 
+&usb1 {
+	dr_mode = "peripheral";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 9a51b8c..497c417 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -61,7 +61,7 @@
 			status = "disabled";
 		};
 
-		usb1: usb@25000000 {
+		keystone_usb1: usb@25000000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -74,7 +74,7 @@
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@25010000 {
+			usb1: dwc3@25010000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x25010000 0x70000>;
 				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 3372615..2919c519 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -83,6 +83,11 @@
 			pinctrl-single,function-mask = <0x001b0007>;
 		};
 
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
 		uart0: serial@02530c00 {
 			compatible = "ns16550a";
 			current-speed = <115200>;
@@ -93,5 +98,32 @@
 			clock-frequency = <200000000>;
 			status = "disabled";
 		};
+
+		kirq0: keystone_irq@026202a0 {
+			compatible = "ti,keystone-irq";
+			interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,syscon-dev = <&devctrl 0x2a0>;
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		msgmgr: msgmgr@02a00000 {
+			compatible = "ti,k2g-message-manager";
+			#mbox-cells = <2>;
+			reg-names = "queue_proxy_region",
+				    "queue_state_debug_region";
+			reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
+			interrupt-names = "rx_005",
+					  "rx_057";
+			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index b38b344..2156ff9 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -83,10 +83,14 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &aemif {
 	cs0 {
 		#address-cells = <2>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 7f9c2e9..056b42f 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -32,10 +32,14 @@
 	status = "okay";
 };
 
-&usb {
+&keystone_usb0 {
 	status = "okay";
 };
 
+&usb0 {
+	dr_mode = "host";
+};
+
 &i2c0 {
 	dtt@50 {
 		compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index e23f46d..02708ba 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -188,7 +188,7 @@
 			status = "disabled";
 		};
 
-		usb: usb@2680000 {
+		keystone_usb0: usb@2680000 {
 			compatible = "ti,keystone-dwc3";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -201,7 +201,7 @@
 			dma-ranges;
 			status = "disabled";
 
-			dwc3@2690000 {
+			usb0: dwc3@2690000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x2690000 0x70000>;
 				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index ef84d86..5bf6289 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 0db0e3e..94e49f3 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -41,7 +41,7 @@
 		};
 
 		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-0 = <&pmx_dip_switches>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -174,3 +174,10 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&gpio0 {
+	status = "okay";
+
+	pinctrl-0 = <&pmx_gpio_header>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
index e4ecab1..7175511 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -116,6 +116,10 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+};
+
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 365f39ff..0ff1c2d 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -35,10 +35,15 @@
 	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
@@ -54,10 +59,6 @@
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		gpmc,device-width = <2>;
-
-		gpmc,page-burst-access-ns = <5>;
-		gpmc,cycle2cycle-delay-ns = <50>;
-
 		#address-cells = <1>;
 		#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 5e9a13c..731ec37 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		user0 {
@@ -46,6 +51,7 @@
 		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		gpmc,sync-clk-ps = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index fdb736c..7cae9c5 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -20,6 +20,9 @@
 #define LPC_GPIO(port, pin)	(port * 32 + pin)
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -186,6 +189,10 @@
 			clock-names = "stmmaceth";
 			resets = <&rgu 22>;
 			reset-names = "stmmaceth";
+			rx-fifo-depth = <256>;
+			tx-fifo-depth = <256>;
+			snps,pbl = <4>; /* 32 (8x mode) */
+			snps,force_thresh_dma_mode;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index e295e1e..b5841fa 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -51,9 +51,19 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>,
+		ranges = <0x00000000 0x00000000 0x10000000>,
+			 <0x20000000 0x20000000 0x30000000>,
 			 <0xe0000000 0xe0000000 0x04000000>;
 
+		iram: sram@08000000 {
+			compatible = "mmio-sram";
+			reg = <0x08000000 0x20000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x08000000 0x20000>;
+		};
+
 		/*
 		 * Enable either SLC or MLC
 		 */
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
index 5cfadb0..7c16d63 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -30,7 +30,7 @@
 		stdout-path = &uart2;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x0800000>; /* 8 MB */
 	};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 6c9048d..874c75d 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
@@ -424,7 +424,7 @@
 
 	/* NXP SE97BTP with temperature sensor + eeprom */
 	sensor@18 {
-		compatible = "nxp,jc42";
+		compatible = "nxp,se97", "jedec,jc-42.4-temp";
 		reg = <0x18>;
 	};
 
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 1919be4..9b5fad6 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -33,7 +33,7 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@28000000 {
 		device_type = "memory";
 		reg = <0x28000000 0x2000000>; /* 32 MB */
 	};
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 75ecaed..a8b148a 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -108,12 +108,23 @@
 
 	panel: panel {
 		compatible = "nec,nl4827hc19-05b";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
 	};
 };
 
 &dcu {
-	fsl,panel = <&panel>;
 	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &dspi1 {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index fc4080d..41fd536 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -162,6 +162,27 @@
 			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
 		};
 
+		pwm_ab: pwm@8550 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc1108550 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm_cd: pwm@8650 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc1108650 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm_ef: pwm@86c0 {
+			compatible = "amlogic,meson8b-pwm";
+			reg = <0xc11086c0 0x10>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		pinctrl_cbus: pinctrl@c1109880 {
 			compatible = "amlogic,meson8b-cbus-pinctrl";
 			reg = <0xc1109880 0x10>;
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index e3fed8d..efb8a03 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -42,6 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/ntc-gr8-evb.dts b/arch/arm/boot/dts/ntc-gr8-evb.dts
new file mode 100644
index 0000000..4b622f3
--- /dev/null
+++ b/arch/arm/boot/dts/ntc-gr8-evb.dts
@@ -0,0 +1,342 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ntc-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing GR8-EVB";
+	compatible = "nextthing,gr8-evb", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 10000 0>;
+		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+};
+
+&be0 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	wm8978: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button@1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button@1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+
+	/* MLC Support sucks for now */
+	status = "disabled";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_pin_gr8_evb: usb0-id-pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&rtp {
+	allwinner,ts-attached;
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spdif_tx_pins_a>;
+	status = "okay";
+};
+
+&tve0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The GR8-EVB has a somewhat interesting design. There's a
+	 * pin supposed to control VBUS, an ID pin, a VBUS detect pin,
+	 * so everything should work just fine.
+	 *
+	 * Except that the pin supposed to control VBUS is not
+	 * connected to any controllable output, neither to the SoC
+	 * through a GPIO or to the PMIC, and it is pulled down,
+	 * meaning that we will never be able to enable VBUS on this
+	 * board.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ntc-gr8.dtsi b/arch/arm/boot/dts/ntc-gr8.dtsi
new file mode 100644
index 0000000..ca54e03
--- /dev/null
+++ b/arch/arm/boot/dts/ntc-gr8.dtsi
@@ -0,0 +1,1087 @@
+/*
+ * Copyright 2016 Mylène Josserand
+ *
+ * Mylène Josserand <mylene.josserand@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc3M: osc3M-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc3M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
+		pll3: clk@01c20010 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20010 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll3";
+		};
+
+		pll3x2: pll3x2-clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll3>;
+			clock-output-names = "pll3-2x";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		pll7: clk@01c20030 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll3-clk";
+			reg = <0x01c20030 0x4>;
+			clocks = <&osc3M>;
+			clock-output-names = "pll7";
+		};
+
+		pll7x2: pll7x2-clk {
+			compatible = "allwinner,sun4i-a10-pll3-2x-clk";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+			clocks = <&pll7>;
+			clock-output-names = "pll7-2x";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>, <&cpu>, <&pll6 1>;
+			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 1>;
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-indices = <0>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-indices = <0>, <1>,
+					<2>, <5>, <6>,
+					<7>, <8>, <9>,
+					<10>, <13>,
+					<14>, <17>, <20>,
+					<21>, <22>,
+					<28>, <32>, <34>,
+					<36>, <40>, <44>,
+					<46>, <51>,
+					<52>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_emac", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2",
+					     "ahb_hstimer", "ahb_ve", "ahb_tve",
+					     "ahb_lcd", "ahb_csi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-indices = <0>, <3>,
+					<5>, <6>;
+			clock-output-names = "apb0_codec", "apb0_i2s0",
+					     "apb0_pio", "apb0_ir";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-indices = <0>, <1>,
+					<2>, <17>,
+					<18>, <19>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+					     "apb1_i2c2", "apb1_uart1",
+					     "apb1_uart2", "apb1_uart3";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		i2s0_clk: clk@01c200b8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200b8 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "i2s0";
+		};
+
+		spdif_clk: clk@01c200c0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod1-clk";
+			reg = <0x01c200c0 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_8X>,
+				 <&pll2 SUN4I_A10_PLL2_4X>,
+				 <&pll2 SUN4I_A10_PLL2_2X>,
+				 <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "spdif";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "nextthing,gr8-dram-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>,
+					<25>,
+					<26>,
+					<29>,
+					<31>;
+			clock-output-names = "dram_ve",
+					     "dram_csi",
+					     "dram_de_fe",
+					     "dram_de_be",
+					     "dram_ace",
+					     "dram_iep";
+		};
+
+		de_be_clk: clk@01c20104 {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c20104 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-be";
+		};
+
+		de_fe_clk: clk@01c2010c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-display-clk";
+			reg = <0x01c2010c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll5 1>;
+			clock-output-names = "de-fe";
+		};
+
+		tcon_ch0_clk: clk@01c20118 {
+			#clock-cells = <0>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-tcon-ch0-clk";
+			reg = <0x01c20118 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch0-sclk";
+		};
+
+		tcon_ch1_clk: clk@01c2012c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-tcon-ch1-clk";
+			reg = <0x01c2012c 0x4>;
+			clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>;
+			clock-output-names = "tcon-ch1-sclk";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	display-engine {
+		compatible = "allwinner,sun5i-a13-display-engine";
+		allwinner,pipelines = <&fe0>;
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@00000000 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+			};
+
+			sram_d: sram@00010000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0000 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ahb_gates 13>, <&nand_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tve0: tv-encoder@01c0a000 {
+			compatible = "allwinner,sun4i-a10-tv-encoder";
+			reg = <0x01c0a000 0x1000>;
+			clocks = <&ahb_gates 34>;
+			resets = <&tcon_ch0_clk 0>;
+			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tve0_in_tcon0: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&tcon0_out_tve0>;
+				};
+			};
+		};
+
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun5i-a13-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&tcon_ch0_clk 1>;
+			reset-names = "lcd";
+			clocks = <&ahb_gates 36>,
+				 <&tcon_ch0_clk>,
+				 <&tcon_ch1_clk>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon-pixel-clock";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_tve0: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tve0_in_tcon0>;
+					};
+				};
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ahb_gates 0>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+
+			dr_mode = "otg";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "nextthing,gr8-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2s0_data_pins_a: i2s0-data@0 {
+				allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+				allwinner,function = "i2s0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2s0_mclk_pins_a: i2s0-mclk@0 {
+				allwinner,pins = "PB6", "PB7", "PB8", "PB9";
+				allwinner,function = "i2s0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+						 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+						 "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_pins_a: nand-base0@0 {
+				allwinner,pins = "PC0", "PC1", "PC2",
+						"PC5", "PC8", "PC9", "PC10",
+						"PC11", "PC12", "PC13", "PC14",
+						"PC15";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_cs0_pins_a: nand-cs@0 {
+				allwinner,pins = "PC4";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			nand_rb0_pins_a: nand-rb@0 {
+				allwinner,pins = "PC6";
+				allwinner,function = "nand0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spdif_tx_pins_a: spdif@0 {
+				allwinner,pins = "PB10";
+				allwinner,function = "spdif";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			uart1_pins_a: uart1@1 {
+				allwinner,pins = "PG3", "PG4";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_cts_rts_pins_a: uart1-cts-rts@0 {
+				allwinner,pins = "PG5", "PG6";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		spdif: spdif@01c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&apb0_gates 1>, <&spdif_clk>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@01c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&apb0_gates 3>, <&i2s0_clk>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun5i-a13-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ahb_gates 46>, <&de_fe_clk>,
+				 <&dram_gates 25>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_fe_clk>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun5i-a13-display-backend";
+			reg = <0x01e60000 0x10000>;
+			clocks = <&ahb_gates 44>, <&de_be_clk>,
+				 <&dram_gates 26>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&de_be_clk>;
+			status = "disabled";
+
+			assigned-clocks = <&de_be_clk>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 578fa2a..4f793a0 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -12,11 +12,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		serial0 = &uart1;
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 34cdecb..9265c0b 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP2420 H4 board";
 	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x4000000>; /* 64 MB */
 	};
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index db95aad..7e5ffc5 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -1,7 +1,7 @@
 #include "omap2420.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
index 6b36ede..4f7d9d7 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP2430 SDP";
 	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 8ffde06..85e297e 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index a19d907..4be85ce 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -19,7 +19,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 6a0df13..57b9a02 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -4,7 +4,7 @@
 
 / {
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 5860101..f330c69 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -10,7 +10,7 @@
 
 #include "omap34xx.dtsi"
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index ed44982..4f9a765 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -15,7 +15,7 @@
 	model = "TI OMAP37XX EVM (TMDSEVM3730)";
 	compatible = "ti,omap3-evm-37xx", "ti,omap3630", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index e10dcd0..99b2bfc 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -14,7 +14,7 @@
 	model = "TI OMAP35XX EVM (TMDSEVM3530)";
 	compatible = "ti,omap3-evm", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index c09a057..b3a8b1f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -21,7 +21,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -102,7 +102,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm11 0 2000000 0>;
+		pwms = <&pwm11 0 12000000 0>;
 		pwm-names = "backlight";
 		brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <9>;	/* => 90 */
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index f4f2ce4..54c4c07 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -13,7 +13,7 @@
 #include "omap36xx.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index 2f353da..e28fe13c 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -15,7 +15,7 @@
 	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
 	compatible = "ti,omap3-ldp", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index eff816e..fa611a5 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -17,7 +17,7 @@
 			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x8000000>;   /* 128 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 2a6078a..87ca50b 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -54,7 +54,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 927b17f..5d8c4b4 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -24,12 +24,12 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	vemmc: fixedregulator@0 {
+	vemmc: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "VEMMC";
 		regulator-min-microvolt = <2900000>;
@@ -39,7 +39,7 @@
 		enable-active-high;
 	};
 
-	vwlan_fixed: fixedregulator@2 {
+	vwlan_fixed: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VWLAN";
 		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 3b3a759..99a7eee 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -44,7 +44,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&button_pins>;
-		button0@10 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index de256fa..401fae8 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -11,6 +11,12 @@
  */
 
 / {
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	pwmleds {
 		compatible = "pwm-leds";
 
@@ -223,7 +229,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		compatible = "ti,omap2-nand";
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 7df2792..56dbd11 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index ca86da6..854117d 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -119,7 +119,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	lcd0: display {
+	lcd0: display@1 {
 		compatible = "lgphilips,lb035q02";
 		label = "lcd35";
 
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 250cc7f..286f5ba 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 8df7ec3..a8020fb 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 0ea2c45..11965737 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -37,13 +37,13 @@
 		pinctrl-0 = <&button_pins>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@23 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
 			wakeup-source;
 		};
-		button1@14 {
+		button1 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
index 9e24b6a..1b304e2 100644
--- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index 334109e..82e98ee 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index dbc4dc7..53e007a 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -18,7 +18,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -45,28 +45,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@1 {
+		led1 {
 			label = "pandora::sd1";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* GPIO_128 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "pandora::sd2";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* GPIO_129 */
 			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "pandora::bluetooth";
 			gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;	/* GPIO_158 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "pandora::wifi";
 			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;	/* GPIO_159 */
 			linux,default-trigger = "mmc2";
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
index 78a1184..bc4498e 100644
--- a/arch/arm/boot/dts/omap3-sniper.dts
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 644d3c8..dc80886b 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -26,7 +26,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index c29b41d..45e2ce0 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -20,7 +20,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 4c3c471..353d818 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -12,11 +12,11 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap3430", "ti,omap3";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
@@ -78,7 +78,7 @@
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
-	ocp {
+	ocp@68000000 {
 		compatible = "ti,omap3-l3-smx", "simple-bus";
 		reg = <0x68000000 0x10000>;
 		interrupts = <9 10>;
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index a0dc8d8..abd69211 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -13,7 +13,7 @@
 	model = "TI OMAP3430 SDP";
 	compatible = "ti,omap3430-sdp", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index e446562..e41c52d 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -28,7 +28,7 @@
 		};
 	};
 
-	ocp {
+	ocp@68000000 {
 		omap3_pmx_core2: pinmux@480025d8 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x480025d8 0x24>;
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 8b797915..718fa88 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -30,7 +30,7 @@
 		};
 	};
 
-	ocp {
+	ocp@68000000 {
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x49042000 0x400>;
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 6b39808..1b82512 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -32,7 +32,7 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		button0@121 {
+		button0 {
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index a90b582..ec0bd97 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -12,7 +12,7 @@
 	model = "Gumstix Duovero";
 	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/omap4-kc1.dts b/arch/arm/boot/dts/omap4-kc1.dts
index 2251bd5..e3763ac 100644
--- a/arch/arm/boot/dts/omap4-kc1.dts
+++ b/arch/arm/boot/dts/omap4-kc1.dts
@@ -13,7 +13,7 @@
 	model = "Amazon Kindle Fire (first generation)";
 	compatible = "amazon,omap4-kc1", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index f8f1395..1673689 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -8,7 +8,7 @@
 #include "elpida_ecb240abacn.dtsi"
 
 / {
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
@@ -446,6 +446,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&wl12xx_pins>;
 	vmmc-supply = <&wl12xx_vmmc>;
+	interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x10e>;
 	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 10d73a7..d728ec9 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -14,7 +14,7 @@
 	model = "TI OMAP4 SDP board";
 	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 873cfc8..758b6eb 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -12,7 +12,7 @@
 	model = "Variscite VAR-SOM-OM44";
 	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3fdc51c..0ced079 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -10,11 +10,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,omap4430", "ti,omap4";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 5196113..6365635 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -77,16 +77,6 @@
 		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
 	tpd12s015: encoder {
 		compatible = "ti,tpd12s015";
 
@@ -332,7 +322,7 @@
 
 	wlcore_irq_pin: pinmux_wlcore_irq_pin {
 		pinctrl-single,pins = <
-			OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+			OMAP5_IOPAD(0x40, PIN_INPUT | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
 		>;
 	};
 };
@@ -355,15 +345,17 @@
 	non-removable;
 	cap-power-off-card;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
-	interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
-			       &omap5_pmx_core 0x168>;
+	pinctrl-0 = <&mmc3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x16a>;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 	wlcore: wlcore@2 {
 		compatible = "ti,wl1271";
 		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
@@ -391,14 +383,23 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		ti,mux-pad1 = <0xa1>;
+		ti,mux-pad2 = <0x1b>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
+		palmas_gpio: gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
 			ti,enable-id-detection;
 			ti,wakeup;
+			id-gpios = <&palmas_gpio 0 GPIO_ACTIVE_HIGH>;
 		};
 
 		clk32kgaudio: palmas_clk32k@1 {
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index a976560..b153f60 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -11,9 +11,9 @@
 	model = "CompuLab CM-T54";
 	compatible = "compulab,omap5-cm-t54", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2048 MB */
+		reg = <0 0x80000000 0 0x7f000000>; /* 2048 MB */
 	};
 
 	aliases {
@@ -72,7 +72,7 @@
 
 	leds {
 		compatible = "gpio-leds";
-		led@1 {
+		led1 {
 			label = "Heartbeat";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index f75ce02..8fc1921 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -7,15 +7,47 @@
  */
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "omap5-board-common.dtsi"
 
 / {
 	model = "IGEPv5";
 	compatible = "isee,omap5-igep0050", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7f000000>; /* 2032 MB */
+		reg = <0x0 0x80000000 0 0x7f000000>;	/* 2032 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "board:green:usr0";
+			gpios = <&tca6416 1 0>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "board:red:usr1";
+			gpios = <&tca6416 2 0>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "board:blue:usr1";
+			gpios = <&tca6416 3 0>;
+			default-state = "off";
+		};
 	};
 };
 
@@ -58,6 +90,12 @@
 			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	power_button_pin: pinctrl_power_button_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x086, PIN_INPUT | MUX_MODE6)	/* gpio4_118 */
+		>;
+	};
 };
 
 &tpd12s015 {
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index a51e605..53d31a8 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -13,9 +13,19 @@
 	model = "TI OMAP5 uEVM board";
 	compatible = "ti,omap5-uevm", "ti,omap5";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2032 MB */
+		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
 	};
 };
 
@@ -61,3 +71,7 @@
 		OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
 	>;
 };
+
+&wlcore {
+	compatible = "ti,wl1837";
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 84c1019..2526211 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -11,11 +11,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,omap5";
 	interrupt-parent = <&wakeupgen>;
@@ -92,10 +90,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0 0x48211000 0 0x1000>,
+		      <0 0x48212000 0 0x1000>,
+		      <0 0x48214000 0 0x2000>,
+		      <0 0x48216000 0 0x2000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -103,7 +101,7 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0 0x48281000 0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -131,11 +129,11 @@
 		compatible = "ti,omap5-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0xc0000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
-		reg = <0x44000000 0x2000>,
-		      <0x44800000 0x3000>,
-		      <0x45000000 0x4000>;
+		reg = <0 0x44000000 0 0x2000>,
+		      <0 0x44800000 0 0x3000>,
+		      <0 0x45000000 0 0x4000>;
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -865,7 +863,7 @@
 			#size-cells = <1>;
 			utmi-mode = <2>;
 			ranges;
-			dwc3@4a030000 {
+			dwc3: dwc3@4a030000 {
 				compatible = "snps,dwc3";
 				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/orion5x-mv88f5181.dtsi b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
new file mode 100644
index 0000000..f667012
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-mv88f5181.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5181", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5181-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5181-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5181-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmx_ge: pmx-ge {
+		marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11",
+			       "mpp12", "mpp13", "mpp14", "mpp15",
+			       "mpp16", "mpp17", "mpp18", "mpp19";
+		marvell,function = "ge";
+	};
+};
+
+&eth {
+	pinctrl-0 = <&pmx_ge>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
new file mode 100644
index 0000000..9f6ae4e
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5181.dtsi"
+
+/ {
+	model = "Netgear WNR854-t";
+	compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
+		     "marvell,orion5x";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		reg = <0x00000000 0x2000000>; /* 32 MB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_reset_button>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "wnr854t:green:power";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "wnr854t:blink:power";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "wnr854t:green:wan";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "rootfs";
+				reg = <0x100000 0x660000>;
+			};
+
+			partition@760000 {
+				label = "uboot_env";
+				reg = <0x760000 0x20000>;
+			};
+
+			partition@780000 {
+				label = "uboot";
+				reg = <0x780000 0x80000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+				phy-handle = <&lan3phy>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				phy-handle = <&lan4phy>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "wan";
+				phy-handle = <&wanphy>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "cpu";
+				ethernet = <&ethport>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan1";
+				phy-handle = <&lan1phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&lan2phy>;
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan3phy: ethernet-phy@0 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan4phy: ethernet-phy@1 {
+				/* Marvell 88E1121R (port 2) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			wanphy: ethernet-phy@2 {
+				/* Marvell 88E1121R (port 1) */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <2>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan1phy: ethernet-phy@5 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <5>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+
+			lan2phy: ethernet-phy@7 {
+				/* Marvell 88E1112 */
+				compatible = "ethernet-phy-id0141.0cb0",
+					     "ethernet-phy-ieee802.3-c22";
+				reg = <7>;
+				marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		/* Hardwired to DSA switch */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_blink: pmx-power-led-blink {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_wan_led: pmx-wan-led {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp4";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	/* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index e1b6d2a..fbccfbb 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -144,9 +144,10 @@
 
 			wdt: wdt@20300 {
 				compatible = "marvell,orion-wdt";
-				reg = <0x20300 0x28>;
+				reg = <0x20300 0x28>, <0x20108 0x4>;
 				interrupt-parent = <&bridge_intc>;
 				interrupts = <3>;
+				clocks = <&core_clk 0>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 0abc93e..6c00383 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -239,6 +239,45 @@
 						};
 					};
 				};
+
+				led@48 {
+					/*
+					 * The keypad LED @0x48 is routed to
+					 * the sensor board where it is
+					 * connected to an infrared LED
+					 * SFH4650 (60mW, @850nm) next to the
+					 * ambient light and proximity sensor
+					 * Capella Microsystems CM3605.
+					 */
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					label = "pm8058:infrared:proximitysensor";
+					default-state = "off";
+				};
+				led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					label = "pm8058:red";
+					default-state = "off";
+				};
+				led@132 {
+					/*
+					 * This is actually green too on my
+					 * board, but documented as yellow.
+					 */
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					label = "pm8058:yellow";
+					default-state = "off";
+					linux,default-trigger = "mmc0";
+				};
+				led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					label = "pm8058:green";
+					default-state = "on";
+					linux,default-trigger = "heartbeat";
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 7b05f07..b72e095 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -253,6 +253,7 @@
 			vddcx-supply	= <&pm8921_s3>;
 			v3p3-supply	= <&pm8921_l3>;
 			v1p8-supply	= <&pm8921_l4>;
+			dr_mode		= "otg";
 		};
 
 		gadget@12500000 {
@@ -272,5 +273,19 @@
 				vqmmc-supply = <&pm8921_s4>;
 			};
 		};
+
+		imem@2a03f000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal	= <0x77665501>;
+				mode-bootloader	= <0x77665500>;
+				mode-recovery	= <0x77665502>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 74a9b6c..1dbe697 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	model = "Qualcomm APQ8064";
@@ -86,6 +87,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 10 0x304>;
@@ -559,22 +646,50 @@
 					compatible = "qcom,pm8921-gpio",
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
-
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -587,9 +702,18 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				rtc@11d {
@@ -611,11 +735,28 @@
 			};
 		};
 
+		qfprom: qfprom@700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		lcc: clock-controller@28000000 {
@@ -712,7 +853,6 @@
 			reg		= <0x12500000 0x400>;
 			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
 			status		= "disabled";
-			dr_mode		= "host";
 
 			clocks		= <&gcc USB_HS1_XCVR_CLK>,
 					  <&gcc USB_HS1_H_CLK>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 7c2df06..39eb7a4 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -94,6 +94,88 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -150,6 +232,27 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index d501382..348503d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -95,6 +95,7 @@
 		};
 
 		sata@29000000 {
+			ports-implemented = <0x1>;
 			status = "ok";
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index acbe71f..8c65e0d 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -159,21 +160,50 @@
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -187,9 +217,18 @@
 					#gpio-cells = <2>;
 					interrupt-parent = <&pmicintc>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				pwrkey@1c {
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 0000000..c0fb4a6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,262 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "LGE MSM 8974 HAMMERHEAD";
+	compatible = "lge,hammerhead", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <815000>;
+						regulator-max-microvolt = <900000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	serial@f991d000 {
+		status = "ok";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 3fb4dad..e7c1577 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -257,23 +257,6 @@
 			};
 		};
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-     };
 };
 
 &soc {
@@ -311,6 +294,45 @@
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@2c {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x2c>;
+
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ts_int_pin>;
+
+			syna,startup-delay-ms = <10>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				touchscreen-inverted-x;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
 	pinctrl@fd510000 {
 		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
 			rx {
@@ -330,6 +352,16 @@
 			};
 		};
 
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
 				pins = "sdc1_clk";
@@ -366,6 +398,16 @@
 			};
 		};
 
+		ts_int_pin: touch-int {
+			pin {
+				pins = "gpio61";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
 	};
 
 	dma-controller@f9944000 {
@@ -387,11 +429,6 @@
 		};
 
 		gpios@c000 {
-			boost_bypass_n_pin: boost-bypass {
-				pins = "gpio21";
-				function = "normal";
-			};
-
 			gpio_keys_pin_a: gpio-keys-active {
 				pins = "gpio2", "gpio3", "gpio4", "gpio5";
 				function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 561d4d1..d210947 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 / {
@@ -131,6 +132,88 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -287,6 +370,27 @@
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -430,6 +534,15 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <0 107 0x0>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
@@ -615,4 +728,30 @@
 			};
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index d95edb6..f8eb5e3 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -88,6 +88,11 @@
 				     <0 0xe1 0 IRQ_TYPE_NONE>,
 				     <0 0xe2 0 IRQ_TYPE_NONE>,
 				     <0 0xe3 0 IRQ_TYPE_NONE>;
+
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
 		};
 
 		pm8941_mpps: mpps@a000 {
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
new file mode 100644
index 0000000..e5dea5b
--- /dev/null
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -0,0 +1,61 @@
+/*
+ * Device Tree Source for the RZ/A1H RSK board
+ *
+ * Copyright (C) 2016 Renesas Electronics
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+
+/ {
+	model = "RSKRZA1";
+	compatible = "renesas,rskrza1", "renesas,r7s72100";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@8000000 {
+		device_type = "memory";
+		reg = <0x08000000 0x02000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&ether {
+	status = "okay";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&scif2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index e8e2a5d7..fb9ef9c 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -108,6 +108,15 @@
 			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
 		};
 
+		mstp7_clks: mstp7_clks@fcfe0430 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0430 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_ETHER>;
+			clock-output-names = "ether";
+		};
+
 		mstp9_clks: mstp9_clks@fcfe0438 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -419,4 +428,17 @@
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
+
+	ether: ethernet@e8203000 {
+		compatible = "renesas,ether-r7s72100";
+		reg = <0xe8203000 0x800>,
+		      <0xe8204800 0x200>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R7S72100_CLK_ETHER>;
+		power-domains = <&cpg_clocks>;
+		phy-mode = "mii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d18558f..351fcc2 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -944,11 +944,6 @@
 		interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe928000 {
@@ -957,12 +952,6 @@
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe930000 {
@@ -971,12 +960,6 @@
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe938000 {
@@ -985,12 +968,6 @@
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
 		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	du: display@feb00000 {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8f0086b..162b55c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -983,12 +983,6 @@
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe930000 {
@@ -997,12 +991,6 @@
 		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	vsp1@fe938000 {
@@ -1011,12 +999,6 @@
 		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
 		power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-		renesas,has-lif;
-		renesas,has-lut;
-		renesas,#rpf = <4>;
-		renesas,#uds = <1>;
-		renesas,#wpf = <4>;
 	};
 
 	du: display@feb00000 {
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index e7b40f0..f3ea43b 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 #include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Blanche";
@@ -50,6 +52,139 @@
 		reg-io-width = <4>;
 		vddvario-supply = <&d3_3v>;
 		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x1_clk: x1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x2_clk: x2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <65000000>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+		};
+		key-2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		};
+		key-3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+		};
+		key-4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW24";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW25";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led17 {
+			gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
+		};
+		led18 {
+			gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
+		};
+		led19 {
+			gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
+		};
+		led20 {
+			gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
@@ -57,10 +192,139 @@
 	clock-frequency = <20000000>;
 };
 
+&can_clk {
+	clock-frequency = <48000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif3_pins: scif3 {
+		groups = "scif3_data";
+		function = "scif3";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data", "can_clk";
+		function = "can0";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp";
+		function = "du0";
+	};
+
+	du1_pins: du1 {
+		groups = "du1_rgb666", "du1_sync", "du1_disp";
+		function = "du1";
+	};
+};
+
 &scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&irqc>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du0_pins &du1_pins>;
+	pinctrl-names = "default";
+
+	clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>,
+		 <&x1_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
new file mode 100644
index 0000000..6dbb941
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -0,0 +1,199 @@
+/*
+ * Device Tree Source for the Wheat board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent  Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wheat";
+	compatible = "renesas,wheat", "renesas,r8a7792";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	d3_3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18000000 {
+		compatible = "smsc,lan89218", "smsc,lan9115";
+		reg = <0 0x18000000 0 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqc>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		reg-io-width = <4>;
+		vddvario-supply = <&d3_3v>;
+		vdd33a-supply = <&d3_3v>;
+
+		pinctrl-0 = <&lan89218_pins>;
+		pinctrl-names = "default";
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-a {
+			linux,code = <KEY_A>;
+			label = "SW2";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		};
+		key-b {
+			linux,code = <KEY_B>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	lan89218_pins: lan89218 {
+		intc {
+			groups = "intc_irq0";
+			function = "intc";
+		};
+		lbsc {
+			groups = "lbsc_ex_cs0";
+			function = "lbsc";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	sdhi0_pins: sdhi0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	qspi_pins: qspi {
+		groups = "qspi_ctrl", "qspi_data4";
+		function = "qspi";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 3fd61d7..713141d 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -18,6 +18,22 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+		vin4 = &vin4;
+		vin5 = &vin5;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -108,6 +124,179 @@
 			#power-domain-cells = <1>;
 		};
 
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7792";
+			reg = <0 0xe6060000 0 0x144>;
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055100 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055100 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO6>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055200 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055200 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO7>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio8: gpio@e6055300 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055300 0 0x50>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 256 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO8>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio9: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 288 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO9>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio10: gpio@e6055500 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055500 0 0x50>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 320 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO10>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		gpio11: gpio@e6055600 {
+			compatible = "renesas,gpio-r8a7792",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055600 0 0x50>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 352 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&mstp9_clks R8A7792_CLK_GPIO11>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7792",
 				     "renesas,rcar-dmac";
@@ -262,6 +451,18 @@
 			status = "disabled";
 		};
 
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7792";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			clocks = <&mstp3_clks R8A7792_CLK_SDHI0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		jpu: jpeg-codec@fe980000 {
 			compatible = "renesas,jpu-r8a7792",
 				     "renesas,rcar-gen2-jpu";
@@ -271,6 +472,242 @@
 			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
 		};
 
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7792",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_ETHERAVB>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C doesn't need pinmux */
+		i2c0: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e6520000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6520000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e6528000 {
+			compatible = "renesas,i2c-r8a7792";
+			reg = <0 0xe6528000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_I2C5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		qspi: spi@e6b10000 {
+			compatible = "renesas,qspi-r8a7792", "renesas,qspi";
+			reg = <0 0xe6b10000 0 0x2c>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_QSPI_MOD>;
+			dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+			       <&dmac1 0x17>, <&dmac1 0x18>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7792";
+			reg = <0 0xfeb00000 0 0x40000>;
+			reg-names = "du";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_DU0>,
+				 <&mstp7_clks R8A7792_CLK_DU1>;
+			clock-names = "du.0", "du.1";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb0: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_rgb1: endpoint {
+					};
+				};
+			};
+		};
+
+		can0: can@e6e80000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e80000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_CAN0>,
+				 <&rcan_clk>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		can1: can@e6e88000 {
+			compatible = "renesas,can-r8a7792",
+				     "renesas,rcar-gen2-can";
+			reg = <0 0xe6e88000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp9_clks R8A7792_CLK_CAN1>,
+				 <&rcan_clk>, <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN2>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN3>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN4>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7792",
+				     "renesas,rcar-gen2-vin";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp8_clks R8A7792_CLK_VIN5>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vsp1@fe928000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe928000 0 0x8000>;
+			interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1_SY>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		vsp1@fe930000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe930000 0 0x8000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1DU0>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
+		vsp1@fe938000 {
+			compatible = "renesas,vsp1";
+			reg = <0 0xfe938000 0 0x8000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp1_clks R8A7792_CLK_VSP1DU1>;
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",
@@ -291,6 +728,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		zx_clk: zx {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+		};
 		zs_clk: zs {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -298,6 +742,13 @@
 			clock-div = <6>;
 			clock-mult = <1>;
 		};
+		hp_clk: hp {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+		};
 		p_clk: p {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
@@ -319,16 +770,42 @@
 			clock-div = <8>;
 			clock-mult = <1>;
 		};
+		sd_clk: sd {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+		rcan_clk: rcan {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <49>;
+			clock-mult = <1>;
+		};
+		zg_clk: zg {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <5>;
+			clock-mult = <1>;
+		};
 
 		/* Gate clocks */
 		mstp1_clks: mstp1_clks@e6150134 {
 			compatible = "renesas,r8a7792-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
-			clocks = <&m2_clk>;
+			clocks = <&m2_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
-			clock-indices = <R8A7792_CLK_JPU>;
-			clock-output-names = "jpu";
+			clock-indices = <
+				R8A7792_CLK_JPU
+				R8A7792_CLK_VSP1DU1 R8A7792_CLK_VSP1DU0
+				R8A7792_CLK_VSP1_SY
+			>;
+			clock-output-names = "jpu", "vsp1du1", "vsp1du0",
+					     "vsp1-sy";
 		};
 		mstp2_clks: mstp2_clks@e6150138 {
 			compatible = "renesas,r8a7792-mstp-clocks",
@@ -341,6 +818,15 @@
 			>;
 			clock-output-names = "sys-dmac1", "sys-dmac0";
 		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&sd_clk>;
+			#clock-cells = <1>;
+			renesas,clock-indices = <R8A7792_CLK_SDHI0>;
+			clock-output-names = "sdhi0";
+		};
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a7792-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -355,15 +841,65 @@
 				     "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
 			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
-				 <&p_clk>, <&p_clk>;
+				 <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
 				R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
 				R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+				R8A7792_CLK_DU1 R8A7792_CLK_DU0
 			>;
 			clock-output-names = "hscif1", "hscif0", "scif3",
-					     "scif2", "scif1", "scif0";
+					     "scif2", "scif1", "scif0",
+					     "du1", "du0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+			         <&zg_clk>, <&zg_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_VIN5 R8A7792_CLK_VIN4
+				R8A7792_CLK_VIN3 R8A7792_CLK_VIN2
+				R8A7792_CLK_VIN1 R8A7792_CLK_VIN0
+				R8A7792_CLK_ETHERAVB
+			>;
+			clock-output-names = "vin5", "vin4", "vin3", "vin2",
+					     "vin1", "vin0", "etheravb";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7792-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>,
+				 <&cpg_clocks R8A7792_CLK_QSPI>,
+				 <&cp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6
+				R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4
+				R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2
+				R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0
+				R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10
+				R8A7792_CLK_CAN1 R8A7792_CLK_CAN0
+				R8A7792_CLK_QSPI_MOD
+				R8A7792_CLK_GPIO9 R8A7792_CLK_GPIO8
+				R8A7792_CLK_I2C5 R8A7792_CLK_I2C4
+				R8A7792_CLK_I2C3 R8A7792_CLK_I2C2
+				R8A7792_CLK_I2C1 R8A7792_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4",
+				"gpio3", "gpio2", "gpio1", "gpio0",
+				"gpio11", "gpio10", "can1", "can0",
+				"qspi_mod", "gpio9", "gpio8",
+				"i2c5", "i2c4", "i2c3", "i2c2",
+				"i2c1", "i2c0";
 		};
 	};
 
@@ -382,4 +918,12 @@
 		/* This value must be overridden by the board. */
 		clock-frequency = <0>;
 	};
+
+	/* External CAN clock */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 1ad37d4..8d1b35a 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -10,6 +10,7 @@
 
 /dts-v1/;
 #include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Alt";
@@ -29,6 +30,63 @@
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 
+	d3_3v: regulator-d3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
 	lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -140,6 +198,21 @@
 		groups = "vin0_data8", "vin0_clk";
 		function = "vin0";
 	};
+
+	mmcif0_pins: mmcif0 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+	};
 };
 
 &cmt0 {
@@ -169,6 +242,39 @@
 	};
 };
 
+&mmcif0 {
+	pinctrl-0 = <&mmcif0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&d3_3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index cf24f45..cf880ac 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,29 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -193,6 +227,16 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
 		function = "du1";
 	};
+
+	ssi_pins: sound {
+		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		groups = "audio_clkc";
+		function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -230,6 +274,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -392,3 +442,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 685f986..9365580 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -296,6 +296,34 @@
 		dma-channels = <15>;
 	};
 
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				  "ch0", "ch1", "ch2", "ch3", "ch4", "ch5",
+				  "ch6", "ch7", "ch8", "ch9", "ch10", "ch11",
+				  "ch12";
+		clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a7794",
 			     "renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -697,7 +725,7 @@
 
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7794";
-		reg = <0 0xee100000 0 0x200>;
+		reg = <0 0xee100000 0 0x328>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
 		dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
@@ -866,6 +894,22 @@
 		};
 	};
 
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_VSP1_S>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_VSP1_DU0>;
+		power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
+	};
+
 	du: display@feb00000 {
 		compatible = "renesas,du-r8a7794";
 		reg = <0 0xfeb00000 0 0x40000>;
@@ -952,6 +996,27 @@
 			clock-frequency = <0>;
 		};
 
+		/*
+		 * The external audio clocks are configured  as 0 Hz fixed
+		 * frequency clocks by default.  Boards that provide audio
+		 * clocks should override them.
+		 */
+		audio_clka: audio_clka {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clkb: audio_clkb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+		audio_clkc: audio_clkc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7794-cpg-clocks",
@@ -1183,6 +1248,15 @@
 			clock-indices = <R8A7794_CLK_IRQC>;
 			clock-output-names = "irqc";
 		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_AUDIO_DMAC0
+					 R8A7794_CLK_PWM>;
+			clock-output-names = "audmac0", "pwm";
+		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
@@ -1237,6 +1311,58 @@
 				"gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod",
 				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7794-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+				 <&p_clk>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>,
+				 <&mstp10_clks R8A7794_CLK_SCU_ALL>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_SSI_ALL
+					 R8A7794_CLK_SSI9 R8A7794_CLK_SSI8
+					 R8A7794_CLK_SSI7 R8A7794_CLK_SSI6
+					 R8A7794_CLK_SSI5 R8A7794_CLK_SSI4
+					 R8A7794_CLK_SSI3 R8A7794_CLK_SSI2
+					 R8A7794_CLK_SSI1 R8A7794_CLK_SSI0
+					 R8A7794_CLK_SCU_ALL
+					 R8A7794_CLK_SCU_DVC1
+					 R8A7794_CLK_SCU_DVC0
+					 R8A7794_CLK_SCU_CTU1_MIX1
+					 R8A7794_CLK_SCU_CTU0_MIX0
+					 R8A7794_CLK_SCU_SRC6
+					 R8A7794_CLK_SCU_SRC5
+					 R8A7794_CLK_SCU_SRC4
+					 R8A7794_CLK_SCU_SRC3
+					 R8A7794_CLK_SCU_SRC2
+					 R8A7794_CLK_SCU_SRC1>;
+			clock-output-names = "ssi-all", "ssi9", "ssi8", "ssi7",
+					     "ssi6", "ssi5", "ssi4", "ssi3",
+					     "ssi2", "ssi1", "ssi0",
+					     "scu-all", "scu-dvc1", "scu-dvc0",
+					     "scu-ctu1-mix1", "scu-ctu0-mix0",
+					     "scu-src6", "scu-src5", "scu-src4",
+					     "scu-src3", "scu-src2", "scu-src1";
+		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
@@ -1306,4 +1432,185 @@
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
+
+	rcar_sound: sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible = "renesas,rcar_sound-r8a7794",
+			     "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+		clocks = <&mstp10_clks R8A7794_CLK_SSI_ALL>,
+			 <&mstp10_clks R8A7794_CLK_SSI9>,
+			 <&mstp10_clks R8A7794_CLK_SSI8>,
+			 <&mstp10_clks R8A7794_CLK_SSI7>,
+			 <&mstp10_clks R8A7794_CLK_SSI6>,
+			 <&mstp10_clks R8A7794_CLK_SSI5>,
+			 <&mstp10_clks R8A7794_CLK_SSI4>,
+			 <&mstp10_clks R8A7794_CLK_SSI3>,
+			 <&mstp10_clks R8A7794_CLK_SSI2>,
+			 <&mstp10_clks R8A7794_CLK_SSI1>,
+			 <&mstp10_clks R8A7794_CLK_SSI0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC6>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC5>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC4>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC3>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC2>,
+			 <&mstp10_clks R8A7794_CLK_SCU_SRC1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU0_MIX0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_CTU1_MIX1>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC0>,
+			 <&mstp10_clks R8A7794_CLK_SCU_DVC1>,
+			 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+			 <&m2_clk>;
+		clock-names = "ssi-all",
+			      "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+			      "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+			      "src.6", "src.5", "src.4", "src.3", "src.2",
+			      "src.1",
+			      "ctu.0", "ctu.1",
+			      "mix.0", "mix.1",
+			      "dvc.0", "dvc.1",
+			      "clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc@0 {
+				dmas = <&audma0 0xbc>;
+				dma-names = "tx";
+			};
+			dvc1: dvc@1 {
+				dmas = <&audma0 0xbe>;
+				dma-names = "tx";
+			};
+		};
+
+		rcar_sound,mix {
+			mix0: mix@0 { };
+			mix1: mix@1 { };
+		};
+
+		rcar_sound,ctu {
+			ctu00: ctu@0 { };
+			ctu01: ctu@1 { };
+			ctu02: ctu@2 { };
+			ctu03: ctu@3 { };
+			ctu10: ctu@4 { };
+			ctu11: ctu@5 { };
+			ctu12: ctu@6 { };
+			ctu13: ctu@7 { };
+		};
+
+		rcar_sound,src {
+			src@0 {
+				status = "disabled";
+			};
+			src1: src@1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma0 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src@2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma0 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src@3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src@4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src@5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src@6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma0 0xb4>;
+				dma-names = "rx", "tx";
+			};
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi@0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x01>, <&audma0 0x02>,
+				       <&audma0 0x15>, <&audma0 0x16>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi1: ssi@1 {
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x03>, <&audma0 0x04>,
+				       <&audma0 0x49>, <&audma0 0x4a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi2: ssi@2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x05>, <&audma0 0x06>,
+				       <&audma0 0x63>, <&audma0 0x64>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi3: ssi@3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x07>, <&audma0 0x08>,
+				       <&audma0 0x6f>, <&audma0 0x70>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi4: ssi@4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x09>, <&audma0 0x0a>,
+				       <&audma0 0x71>, <&audma0 0x72>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi5: ssi@5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+				       <&audma0 0x73>, <&audma0 0x74>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi6: ssi@6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+				       <&audma0 0x75>, <&audma0 0x76>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi7: ssi@7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0f>, <&audma0 0x10>,
+				       <&audma0 0x79>, <&audma0 0x7a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi8: ssi@8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x11>, <&audma0 0x12>,
+				       <&audma0 0x7b>, <&audma0 0x7c>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi9: ssi@9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x13>, <&audma0 0x14>,
+				       <&audma0 0x7d>, <&audma0 0x7e>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 843d2be..a935523 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -43,6 +43,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3036-cru.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -313,8 +314,17 @@
 	};
 
 	grf: syscon@20008000 {
-		compatible = "rockchip,rk3036-grf", "syscon";
+		compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd";
 		reg = <0x20008000 0x1000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1d8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	acodec: acodec-ana@20030000 {
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 452ca24..041dd5d 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -206,6 +206,10 @@
 	};
 };
 
+&panel {
+	power-supply = <&vcc_lcd>;
+};
+
 &pinctrl {
 	lcd {
 		lcd_en: lcd-en  {
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 736b08b..44ebc6e 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -233,3 +233,7 @@
 		};
 	};
 };
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 963365d..d59208b 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -48,7 +48,7 @@
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -97,6 +97,21 @@
 		#clock-cells = <0>;
 	};
 
+	panel: panel {
+		compatible ="lg,lp079qx1-sp0v", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lcd_cs>;
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -170,6 +185,28 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&edp {
+	force-hpd;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
@@ -280,6 +317,12 @@
 		};
 	};
 
+	lcd {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
new file mode 100644
index 0000000..2e3c341
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -0,0 +1,382 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+
+/ {
+	model = "Rockchip RK3288 Fennec Board";
+	compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
+
+	memory {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_io>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_wl: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usbphy {
+		host_drv: host-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&host_drv>;
+	vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&usb_hsic {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
new file mode 100644
index 0000000..ec418c9
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -0,0 +1,310 @@
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			vcca_18: REG7  {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcca_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vccio_wl>;
+	bb-supply = <&vcc_io>;
+	dvp-supply = <&dovdd_1v8>;
+	flash0-supply = <&vcc_flash>;
+	flash1-supply = <&vcc_lan>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	lcdc-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
new file mode 100644
index 0000000..751bee8
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -0,0 +1,403 @@
+/*
+ * Device tree file for Firefly Rockchip RK3288 Core board
+ * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-firefly-reload-core.dtsi"
+
+/ {
+	model = "Firefly-RK3288-reload";
+	compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:power";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+			panic-indicator;
+		};
+
+		work {
+			gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_5v: vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	af_28: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "af_28";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	dvdd_1v2: af_28-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_pwr>;
+		regulator-name = "dvdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vbat_wl: wifi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&i2c0 {
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: es8328@10 {
+		compatible = "everest,es8328";
+		DVDD-supply = <&vcca_33>;
+		AVDD-supply = <&vcca_33>;
+		PVDD-supply = <&vcca_33>;
+		HPVDD-supply = <&vcca_33>;
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		clock-names = "i2s_hclk", "i2s_clk";
+		reg = <0x10>;
+	};
+};
+
+&i2s {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		cif_pwr: cif-pwr {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index dda8d25..56dd377 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -387,12 +387,16 @@
 		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&comp_int>;
+		vdd-supply = <&vcc_io>;
+		vid-supply = <&vcc_io>;
 	};
 
-	l3g4200d: l3g4200d@68 {
+	l3g4200d: l3g4200d@69 {
 		compatible = "st,l3g4200d-gyro";
 		st,drdy-int-pin = <2>;
-		reg = <0x6b>;
+		reg = <0x69>;
+		vdd-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
 	};
 
 	mma8452: mma8452@1d {
@@ -525,3 +529,7 @@
 &usbphy {
 	status = "okay";
 };
+
+&usb_otg {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 91c4b3c..17ec2e2 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
 #include <dt-bindings/power/rk3288-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -793,6 +794,15 @@
 				clocks = <&cru ACLK_GPU>;
 			};
 		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x94>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	sgrf: syscon@ff740000 {
@@ -834,6 +844,37 @@
 			compatible = "rockchip,rk3288-io-voltage-domain";
 			status = "disabled";
 		};
+
+		usbphy: usbphy {
+			compatible = "rockchip,rk3288-usb-phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			usbphy0: usb-phy@320 {
+				#phy-cells = <0>;
+				reg = <0x320>;
+				clocks = <&cru SCLK_OTGPHY0>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+
+			usbphy1: usb-phy@334 {
+				#phy-cells = <0>;
+				reg = <0x334>;
+				clocks = <&cru SCLK_OTGPHY1>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+
+			usbphy2: usb-phy@348 {
+				#phy-cells = <0>;
+				reg = <0x348>;
+				clocks = <&cru SCLK_OTGPHY2>;
+				clock-names = "phyclk";
+				#clock-cells = <0>;
+			};
+		};
 	};
 
 	wdt: watchdog@ff800000 {
@@ -1087,38 +1128,6 @@
 		};
 	};
 
-	usbphy: phy {
-		compatible = "rockchip,rk3288-usb-phy";
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-
-		usbphy0: usb-phy@320 {
-			#phy-cells = <0>;
-			reg = <0x320>;
-			clocks = <&cru SCLK_OTGPHY0>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy1: usb-phy@334 {
-			#phy-cells = <0>;
-			reg = <0x334>;
-			clocks = <&cru SCLK_OTGPHY1>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-
-		usbphy2: usb-phy@348 {
-			#phy-cells = <0>;
-			reg = <0x348>;
-			clocks = <&cru SCLK_OTGPHY2>;
-			clock-names = "phyclk";
-			#clock-cells = <0>;
-		};
-	};
-
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3288-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index e2cd683..e15beb3 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -43,6 +43,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include "skeleton.dtsi"
 
 / {
@@ -246,8 +247,17 @@
 	};
 
 	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon";
+		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
 		reg = <0x20004000 0x100>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x40>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	grf: grf@20008000 {
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 527e319..6274359 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -8,6 +8,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
 	/*
 	 * Pin banks
@@ -83,91 +85,91 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	extuart_clk: extuart-clk {
 		samsung,pins = "gph-12";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpe-5";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpe-6";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_bus1: sd0-bus1 {
 		samsung,pins = "gpe-7";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd0_bus4: sd0-bus4 {
 		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpl-8";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpl-9";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_bus1: sd1-bus1 {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
 	sd1_bus4: sd1-bus4 {
 		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 };
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index a25debb..f4afda3 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -201,13 +201,13 @@
 &pinctrl0 {
 	gpio_leds: gpio-leds {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	gpio_keys: gpio-keys {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index b1197d8..4e8e802 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -12,9 +12,7 @@
  * published by the Free Software Foundation.
  */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	2
+#include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl0 {
 	/*
@@ -138,514 +136,514 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa-0", "gpa-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa-2", "gpa-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa-4", "gpa-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa-6", "gpa-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ext_dma_0: ext-dma-0 {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ext_dma_1: ext-dma-1 {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_data_0: irda-data-0 {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_data_1: irda-data-1 {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	irda_sdbw: irda-sdbw {
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpb-5", "gpb-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <6>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi0_cs: spi0-cs {
 		samsung,pins = "gpc-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	spi1_cs: spi1-cs {
 		samsung,pins = "gpc-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpg-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpg-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_bus1: sd0-bus1 {
 		samsung,pins = "gpg-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_bus4: sd0-bus4 {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus1: sd1-bus1 {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus4: sd1-bus4 {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_bus8: sd1-bus8 {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpg-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpc-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpc-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_bus1: sd2-bus1 {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	sd2_bus4: sd2-bus4 {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s0_cdclk: i2s0-cdclk {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s1_cdclk: i2s1-cdclk {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	i2s2_cdclk: i2s2-cdclk {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm0_bus: pcm0-bus {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm0_extclk: pcm0-extclk {
 		samsung,pins = "gpd-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pcm1_extclk: pcm1-extclk {
 		samsung,pins = "gpe-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ac97_bus_0: ac97-bus-0 {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	ac97_bus_1: ac97-bus-1 {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_port: cam-port {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_rst: cam-rst {
 		samsung,pins = "gpf-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	cam_field: cam-field {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm_extclk: pwm-extclk {
 		samsung,pins = "gpf-13";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpf-15";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	clkout0: clkout-0 {
 		samsung,pins = "gpf-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col0_0: keypad-col0-0 {
 		samsung,pins = "gph-0";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col1_0: keypad-col1-0 {
 		samsung,pins = "gph-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col2_0: keypad-col2-0 {
 		samsung,pins = "gph-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col3_0: keypad-col3-0 {
 		samsung,pins = "gph-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col4_0: keypad-col4-0 {
 		samsung,pins = "gph-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col5_0: keypad-col5-0 {
 		samsung,pins = "gph-5";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col6_0: keypad-col6-0 {
 		samsung,pins = "gph-6";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col7_0: keypad-col7-0 {
 		samsung,pins = "gph-7";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col0_1: keypad-col0-1 {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col1_1: keypad-col1-1 {
 		samsung,pins = "gpl-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col2_1: keypad-col2-1 {
 		samsung,pins = "gpl-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col3_1: keypad-col3-1 {
 		samsung,pins = "gpl-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col4_1: keypad-col4-1 {
 		samsung,pins = "gpl-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col5_1: keypad-col5-1 {
 		samsung,pins = "gpl-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col6_1: keypad-col6-1 {
 		samsung,pins = "gpl-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_col7_1: keypad-col7-1 {
 		samsung,pins = "gpl-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row0_0: keypad-row0-0 {
 		samsung,pins = "gpk-8";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row1_0: keypad-row1-0 {
 		samsung,pins = "gpk-9";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row2_0: keypad-row2-0 {
 		samsung,pins = "gpk-10";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row3_0: keypad-row3-0 {
 		samsung,pins = "gpk-11";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row4_0: keypad-row4-0 {
 		samsung,pins = "gpk-12";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row5_0: keypad-row5-0 {
 		samsung,pins = "gpk-13";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row6_0: keypad-row6-0 {
 		samsung,pins = "gpk-14";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row7_0: keypad-row7-0 {
 		samsung,pins = "gpk-15";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row0_1: keypad-row0-1 {
 		samsung,pins = "gpn-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row1_1: keypad-row1-1 {
 		samsung,pins = "gpn-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row2_1: keypad-row2-1 {
 		samsung,pins = "gpn-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row3_1: keypad-row3-1 {
 		samsung,pins = "gpn-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row4_1: keypad-row4-1 {
 		samsung,pins = "gpn-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row5_1: keypad-row5-1 {
 		samsung,pins = "gpn-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row6_1: keypad-row6-1 {
 		samsung,pins = "gpn-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	keypad_row7_1: keypad-row7-1 {
 		samsung,pins = "gpn-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_ctrl: lcd-ctrl {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data16: lcd-data-width16 {
@@ -653,8 +651,8 @@
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data18: lcd-data-width18 {
@@ -663,8 +661,8 @@
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
 				"gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	lcd_data24: lcd-data-width24 {
@@ -674,14 +672,14 @@
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
 				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
 				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
 	hsi_bus: hsi-bus {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index da24ab5..4013992 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@30000000 {
 		device_type = "memory";
 		reg = <0x30000000 0x05000000
 			0x40000000 0x18000000>;
@@ -387,7 +387,7 @@
 &pinctrl0 {
 	t_flash_detect: t-flash-detect {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index 0a33d40..c56f51e 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@30000000 {
 		device_type = "memory";
 		reg = <0x30000000 0x05000000
 			0x40000000 0x10000000
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 8c71408..9a3e851 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -19,6 +19,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -270,559 +272,559 @@
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_fctl: uart2-fctl {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart_audio: uart-audio {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s0_bus: i2s0-bus {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s1_bus: i2s1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm1_bus: pcm1-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ac97_bus: ac97-bus {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2s2_bus: i2s2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pcm2_bus: pcm2-bus {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spdif_bus: spdif-bus {
 		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c0_bus: i2c0-bus {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c1_bus: i2c1-bus {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	i2c2_bus: i2c2-bus {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row0: keypad-row-0 {
 		samsung,pins = "gph3-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row1: keypad-row-1 {
 		samsung,pins = "gph3-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row2: keypad-row-2 {
 		samsung,pins = "gph3-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row3: keypad-row-3 {
 		samsung,pins = "gph3-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row4: keypad-row-4 {
 		samsung,pins = "gph3-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row5: keypad-row-5 {
 		samsung,pins = "gph3-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row6: keypad-row-6 {
 		samsung,pins = "gph3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_row7: keypad-row-7 {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col0: keypad-col-0 {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col1: keypad-col-1 {
 		samsung,pins = "gph2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col2: keypad-col-2 {
 		samsung,pins = "gph2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col3: keypad-col-3 {
 		samsung,pins = "gph2-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col4: keypad-col-4 {
 		samsung,pins = "gph2-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col5: keypad-col-5 {
 		samsung,pins = "gph2-5";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col6: keypad-col-6 {
 		samsung,pins = "gph2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	keypad_col7: keypad-col-7 {
 		samsung,pins = "gph2-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpg0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpg0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_cd: sd0-cd {
 		samsung,pins = "gpg0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpg0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpg1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpg1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_cd: sd1-cd {
 		samsung,pins = "gpg1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpg1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpg2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpg2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpg2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpg2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus8: sd2-bus-width8 {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_clk: sd3-clk {
 		samsung,pins = "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cmd: sd3-cmd {
 		samsung,pins = "gpg3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_cd: sd3-cd {
 		samsung,pins = "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus1: sd3-bus-width1 {
 		samsung,pins = "gpg3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd3_bus4: sd3-bus-width4 {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <2>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	eint0: ext-int0 {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint8: ext-int8 {
 		samsung,pins = "gph1-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint15: ext-int15 {
 		samsung,pins = "gph1-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint16: ext-int16 {
 		samsung,pins = "gph2-0";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	eint31: ext-int31 {
 		samsung,pins = "gph3-7";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a_io: cam-port-a-io {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_a_clk_active: cam-port-a-clk-active {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_a_clk_idle: cam-port-a-clk-idle {
 		samsung,pins = "gpe1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_io: cam-port-b-io {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	cam_port_b_clk_active: cam-port-b-clk-active {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	cam_port_b_clk_idle: cam-port-b-clk-idle {
 		samsung,pins = "gpj1-3";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 		lcd_ctrl: lcd-ctrl {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_sync: lcd-sync {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_clk: lcd-clk {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	lcd_data24: lcd-data-width24 {
@@ -832,8 +834,8 @@
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
 				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
 				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts
index 1eedab7..5d14da9 100644
--- a/arch/arm/boot/dts/s5pv210-smdkc110.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 9eb6aff..7539831 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts
index 622599f..7cb50bc 100644
--- a/arch/arm/boot/dts/s5pv210-torbreck.dts
+++ b/arch/arm/boot/dts/s5pv210-torbreck.dts
@@ -29,7 +29,7 @@
 		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
 	};
 
-	memory {
+	memory@20000000 {
 		device_type = "memory";
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index ffc36bd..a853918 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -19,11 +19,13 @@
  * published by the Free Software Foundation.
 */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/s5pv210.h>
 #include <dt-bindings/clock/s5pv210-audss.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		csis0 = &csis0;
 		fimc0 = &fimc0;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 353d0e5..7173ec9 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -77,6 +77,35 @@
 		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
 	};
 
+	etb {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&mck>;
+		clock-names = "apb_pclk";
+
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73C000 0x1000>;
+
+		clocks = <&mck>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+
 	memory {
 		reg = <0x20000000 0x20000000>;
 	};
diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi
index b41d241..28b81d6 100644
--- a/arch/arm/boot/dts/skeleton.dtsi
+++ b/arch/arm/boot/dts/skeleton.dtsi
@@ -1,4 +1,8 @@
 /*
+ * This file is deprecated, and will be removed once existing users have been
+ * updated. New dts{,i} files should *not* include skeleton.dtsi, and should
+ * instead explicitly provide the below nodes only as required.
+ *
  * Skeleton device tree; the bare minimum needed to boot; just include and
  * add a compatible value.  The bootloader will typically populate the memory
  * node.
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 94000cb..f520cbf 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -639,6 +639,22 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index 8a7dfa4..040a164 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -25,3 +25,15 @@
 	broken-cd;
 	bus-width = <4>;
 };
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
index d35aa88..1ec46a7 100644
--- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts
+++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts
@@ -140,6 +140,10 @@
 						0x03020067 // Up
 						0x0303006c>; // Down
 			};
+			stmpe0_pwm: stmpe_pwm {
+				compatible = "st,stmpe-pwm";
+				#pwm-cells = <2>;
+			};
 		};
 		stmpe1: stmpe2401@44 {
 			compatible = "st,stmpe2401";
@@ -172,6 +176,50 @@
 	};
 
 	amba {
+		clcd@10120000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&clcd_24bit_mux>;
+			port {
+				nomadik_clcd_pads: endpoint {
+					remote-endpoint = <&nomadik_clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+				};
+			};
+
+			/*
+			 * WVGA connector 21
+			 * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
+			 * with TPO touch screen.
+			 */
+			panel {
+				compatible = "tpo,tpg110", "panel-dpi";
+				grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
+				scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+				sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+				backlight = <&bl>;
+
+				port {
+					nomadik_clcd_panel: endpoint {
+						remote-endpoint = <&nomadik_clcd_pads>;
+					};
+				};
+
+				panel-timing {
+					clock-frequency = <33200000>;
+					hactive = <800>;
+					hback-porch = <216>;
+					hfront-porch = <40>;
+					hsync-len = <1>;
+					vactive = <480>;
+					vback-porch = <35>;
+					vfront-porch = <10>;
+					vsync-len = <1>;
+				};
+			};
+		};
+
 		/* Activate RX/TX and CTS/RTS on UART 0 */
 		uart0: uart@101fd000 {
 			pinctrl-names = "default";
@@ -183,4 +231,24 @@
 			wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&stmpe0_pwm 0 500000>;
+		pwm-names = "backlight";
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <100>;
+	};
 };
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index d2d532a..adb1c099 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -166,6 +166,24 @@
 				};
 			};
 		};
+		clcd {
+			/*
+			 * This should be activated to use the additional
+			 * 8 lines for bits 16 thru 23 from the CLCD block.
+			 */
+			clcd_24bit_mux: clcd_mux {
+				clcd_24bit_mux {
+					function = "clcd";
+					groups = "clcd_16_23_b_1";
+				};
+			};
+		};
+	};
+
+	/* Power Management Unit */
+	pmu: pmu@101e9000 {
+		compatible = "stericsson,nomadik-pmu", "syscon";
+		reg = <0x101e0000 0x1000>;
 	};
 
 	src: src@101e0000 {
@@ -726,6 +744,16 @@
 		#size-cells = <1>;
 		ranges;
 
+		clcd@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupt-names = "combined";
+			interrupts = <14>;
+			clocks = <&clcdclk>, <&hclkclcd>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
 		vica: intc@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index ad45f5e..13029c0 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -42,7 +42,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -55,7 +55,7 @@
 		 */
 		clk_m_a9: clk-m-a9@92b0000 {
 			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			compatible = "st,stih407-clkgen-a9-mux";
 			reg = <0x92b0000 0x10000>;
 
 			clocks = <&clockgen_a9_pll 0>,
@@ -96,7 +96,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -117,7 +117,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -134,7 +134,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -143,7 +143,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -199,7 +199,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -216,7 +216,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -233,7 +233,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -256,7 +256,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -287,7 +287,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index d294e82..91096a4 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -550,10 +550,10 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
-			non-removable;
 		};
 
 		mmc1: sdhci@09080000 {
@@ -565,8 +565,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};
@@ -608,6 +609,8 @@
 			clock-names = "ahci_clk";
 			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 
+			ports-implemented = <0x1>;
+
 			status = "disabled";
 		};
 
@@ -631,6 +634,8 @@
 			clock-names = "ahci_clk";
 			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 
+			ports-implemented = <0x1>;
+
 			status = "disabled";
 		};
 
@@ -667,6 +672,7 @@
 			compatible	= "st,sti-pwm";
 			#pwm-cells	= <2>;
 			reg		= <0x9810000 0x68>;
+			interrupts      = <GIC_SPI 128 IRQ_TYPE_NONE>;
 			pinctrl-names	= "default";
 			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
 			clock-names	= "pwm";
@@ -734,6 +740,18 @@
 				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
+		cec: sti-cec@094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+		};
+
 		rng10: rng@08a89000 {
 			compatible      = "st,rng";
 			reg		= <0x08a89000 0x1000>;
@@ -821,5 +839,172 @@
 			clock-frequency	= <600000000>;
 			st,syscfg	= <&syscfg_core 0x224>;
 		};
+
+		/* fdma audio */
+		fdma0: dma-controller@8e20000 {
+			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+			reg = <0x8e20000 0x8000>,
+			      <0x8e30000 0x3000>,
+			      <0x8e37000 0x1000>,
+			      <0x8e38000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma app */
+		fdma1: dma-controller@8e40000 {
+			compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
+			reg = <0x8e40000 0x8000>,
+			      <0x8e50000 0x3000>,
+			      <0x8e57000 0x1000>,
+			      <0x8e58000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+		};
+
+		/* fdma free running */
+		fdma2: dma-controller@8e60000 {
+			compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
+			reg = <0x8e60000 0x8000>,
+			      <0x8e70000 0x3000>,
+			      <0x8e77000 0x1000>,
+			      <0x8e78000 0x8000>;
+			reg-names = "slimcore", "dmem", "peripherals", "imem";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
+			dma-channels = <16>;
+			#dma-cells = <3>;
+			clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				<&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				<&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			compatible = "st,stih407-sas-codec";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+			st,syscfg = <&syscfg_core>;
+		};
+
+		sti_uni_player0: sti-uni-player@8d80000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d80000 0x158>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 2 0 1>;
+			dai-name = "Uni Player #0 (HDMI)";
+			dma-names = "tx";
+			st,uniperiph-id = <0>;
+			st,version = <5>;
+			st,mode = "HDMI";
+
+			status		= "disabled";
+		};
+
+		sti_uni_player1: sti-uni-player@8d81000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d81000 0x158>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 3 0 1>;
+			dai-name = "Uni Player #1 (PIO)";
+			dma-names = "tx";
+			st,uniperiph-id = <1>;
+			st,version = <5>;
+			st,mode = "PCM";
+
+			status = "disabled";
+		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d82000 0x158>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 4 0 1>;
+			dai-name = "Uni Player #1 (DAC)";
+			dma-names = "tx";
+			st,uniperiph-id = <2>;
+			st,version = <5>;
+			st,mode = "PCM";
+
+			status = "disabled";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			compatible = "st,sti-uni-player";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
+			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
+			assigned-clock-rates = <50000000>;
+			reg = <0x8d85000 0x158>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 7 0 1>;
+			dma-names = "tx";
+			dai-name = "Uni Player #1 (PIO)";
+			st,uniperiph-id = <3>;
+			st,version = <5>;
+			st,mode = "SPDIF";
+
+			status = "disabled";
+		};
+
+		sti_uni_reader0: sti-uni-reader@8d83000 {
+			compatible = "st,sti-uni-reader";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d83000 0x158>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 5 0 1>;
+			dma-names = "rx";
+			dai-name = "Uni Reader #0 (PCM IN)";
+			st,version = <3>;
+
+			status = "disabled";
+		};
+
+		sti_uni_reader1: sti-uni-reader@8d84000 {
+			compatible = "st,sti-uni-reader";
+			#sound-dai-cells = <0>;
+			st,syscfg = <&syscfg_core>;
+			reg = <0x8d84000 0x158>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
+			dmas = <&fdma0 6 0 1>;
+			dma-names = "rx";
+			dai-name = "Uni Reader #1 (HDMI RX)";
+			st,version = <3>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index a538ae5..c325cc0 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -58,7 +58,7 @@
 
 			pio0: gpio@09610000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -66,7 +66,7 @@
 			};
 			pio1: gpio@09611000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -74,7 +74,7 @@
 			};
 			pio2: gpio@09612000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -82,7 +82,7 @@
 			};
 			pio3: gpio@09613000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -90,7 +90,7 @@
 			};
 			pio4: gpio@09614000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -99,7 +99,7 @@
 
 			pio5: gpio@09615000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -230,6 +230,13 @@
 					};
 				};
 
+				pinctrl_rgmii1_mdio_1: rgmii1-mdio-1 {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
 				pinctrl_mii1: mii1 {
 					st,pins {
 						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
@@ -289,10 +296,12 @@
 				pinctrl_pwm1_chan0_default: pwm1-0-default {
 					st,pins {
 						pwm-out = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
 					};
 				};
 				pinctrl_pwm1_chan1_default: pwm1-1-default {
 					st,pins {
+						pwm-capturein = <&pio4 3 ALT1 IN>;
 						pwm-out = <&pio4 4 ALT1 OUT>;
 					};
 				};
@@ -373,7 +382,7 @@
 
 			pio10: pio@09200000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -381,7 +390,7 @@
 			};
 			pio11: pio@09201000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -389,7 +398,7 @@
 			};
 			pio12: pio@09202000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -397,7 +406,7 @@
 			};
 			pio13: pio@09203000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -405,7 +414,7 @@
 			};
 			pio14: pio@09204000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -413,7 +422,7 @@
 			};
 			pio15: pio@09205000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -421,7 +430,7 @@
 			};
 			pio16: pio@09206000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x100>;
@@ -429,7 +438,7 @@
 			};
 			pio17: pio@09207000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x100>;
@@ -437,7 +446,7 @@
 			};
 			pio18: pio@09208000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x100>;
@@ -445,7 +454,7 @@
 			};
 			pio19: pio@09209000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x9000 0x100>;
@@ -523,6 +532,13 @@
 						scl = <&pio15 5 ALT2 BIDIR>;
 					};
 				};
+
+				pinctrl_i2c2_alt2_1: i2c2-alt2-1 {
+					st,pins {
+						sda = <&pio12 6 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
 			};
 
 			i2c3 {
@@ -916,6 +932,15 @@
 			interrupt-names = "irqmux";
 			ranges = <0 0x09210000 0x10000>;
 
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+
 			tsin4 {
 				pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 {
 					st,pins {
@@ -927,15 +952,6 @@
 					};
 				};
 			};
-
-			pio20: pio@09210000 {
-				gpio-controller;
-				#gpio-cells = <1>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x100>;
-				st,bank-name = "PIO20";
-			};
 		};
 
 		pin-controller-rear {
@@ -951,7 +967,7 @@
 
 			pio30: gpio@09220000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x100>;
@@ -959,7 +975,7 @@
 			};
 			pio31: gpio@09221000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -967,7 +983,7 @@
 			};
 			pio32: gpio@09222000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
@@ -975,7 +991,7 @@
 			};
 			pio33: gpio@09223000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x100>;
@@ -983,7 +999,7 @@
 			};
 			pio34: gpio@09224000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x100>;
@@ -991,7 +1007,7 @@
 			};
 			pio35: gpio@09225000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
@@ -1030,6 +1046,7 @@
 			pwm0 {
 				pinctrl_pwm0_chan0_default: pwm0-0-default {
 					st,pins {
+						pwm-capturein = <&pio31 0 ALT1 IN>;
 						pwm-out = <&pio31 1 ALT1 OUT>;
 					};
 				};
@@ -1067,6 +1084,61 @@
 				};
 			};
 
+			i2s_out {
+				pinctrl_i2s_8ch_out: i2s_8ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+						data1 = <&pio34 0 ALT1 OUT>;
+						data2 = <&pio34 1 ALT1 OUT>;
+						data3 = <&pio34 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_i2s_2ch_out: i2s_2ch_out{
+					st,pins {
+						mclk = <&pio33 5 ALT1 OUT>;
+						lrclk = <&pio33 7 ALT1 OUT>;
+						sclk = <&pio33 6 ALT1 OUT>;
+						data0 = <&pio33 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			i2s_in {
+				pinctrl_i2s_8ch_in: i2s_8ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+						data1 = <&pio33 0 ALT1 IN>;
+						data2 = <&pio33 1 ALT1 IN>;
+						data3 = <&pio33 2 ALT1 IN>;
+						data4 = <&pio33 3 ALT1 IN>;
+					};
+				};
+
+				pinctrl_i2s_2ch_in: i2s_2ch_in{
+					st,pins {
+						mclk = <&pio32 5 ALT1 IN>;
+						lrclk = <&pio32 7 ALT1 IN>;
+						sclk = <&pio32 6 ALT1 IN>;
+						data0 = <&pio32 4 ALT1 IN>;
+					};
+				};
+			};
+
+			spdif_out {
+				pinctrl_spdif_out: spdif_out{
+					st,pins {
+						spdif_out = <&pio34 7 ALT1 OUT>;
+					};
+				};
+			};
+
 			serial3 {
 				pinctrl_serial3: serial3-0 {
 					st,pins {
@@ -1090,7 +1162,7 @@
 
 			pio40: gpio@09230000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0 0x100>;
@@ -1098,7 +1170,7 @@
 			};
 			pio41: gpio@09231000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x100>;
@@ -1106,7 +1178,7 @@
 			};
 			pio42: gpio@09232000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x100>;
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index d60f0d8..291ffac 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -16,7 +16,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -26,14 +29,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
new file mode 100644
index 0000000..ef2ff2f
--- /dev/null
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright (C) 2016 STMicroelectronics (R&D) Limited.
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STiH410 B2260";
+	compatible = "st,stih410-b2260", "st,stih410";
+
+	chosen {
+		bootargs = "console=ttyAS1,115200 clk_ignore_unused";
+		linux,stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		ttyAS1 = &uart1;
+		ethernet0 = &ethernet0;
+	};
+
+	soc {
+
+		leds {
+			compatible = "gpio-leds";
+			user_green_1 {
+				label = "User_green_1";
+				gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+				linux,default-trigger = "heartbeat";
+				default-state = "off";
+			};
+
+			user_green_2 {
+				label = "User_green_2";
+				gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_3 {
+				label = "User_green_3";
+				gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+
+			user_green_4 {
+				label = "User_green_4";
+				gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+				default-state = "off";
+			};
+		};
+
+		/* Low speed expansion connector */
+		uart0: serial@9830000 {
+			label = "LS-UART0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		uart1: serial@9831000 {
+			label = "LS-UART1";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		spi0: spi@9844000 {
+			label = "LS-SPI0";
+			cs-gpio = <&pio30 3 0>;
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c0: i2c@9840000 {
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		/* Low speed expansion connector */
+		i2c1: i2c@9841000 {
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c2: i2c@9842000 {
+			label = "HS-I2C2";
+			pinctrl-0 = <&pinctrl_i2c2_alt2_1>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		i2c3: i2c@9843000 {
+			label = "HS-I2C3";
+			pinctrl-0 = <&pinctrl_i2c3_alt3_0>;
+			status = "okay";
+		};
+
+		mmc0: sdhci@09060000 {
+			pinctrl-0 = <&pinctrl_sd0>;
+			bus-width = <4>;
+			status = "okay";
+		};
+
+		/* high speed expansion connector */
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
+		pwm0: pwm@9810000 {
+			status = "okay";
+		};
+
+		pwm1: pwm@9510000 {
+			status = "okay";
+		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			phy-mode = "rgmii";
+			pinctrl-0 = <&pinctrl_rgmii1 &pinctrl_rgmii1_mdio_1>;
+
+			snps,phy-bus-name = "stmmac";
+			snps,phy-bus-id = <0>;
+			snps,phy-addr = <0>;
+			snps,reset-gpio = <&pio0 7 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us = <0 10000 1000000>;
+
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+			status = "okay";
+		};
+
+		sti-display-subsystem {
+			sti_hdmi: sti-hdmi@8d04000 {
+				status = "okay";
+			};
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		sata1: sata@9b28000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index fd50496..8598eff 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih407-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -122,7 +122,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -140,7 +140,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -150,7 +150,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -218,7 +218,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -235,7 +235,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -254,7 +254,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -277,7 +277,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -308,7 +308,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 18ed1ad..a3ef734 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -41,7 +41,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +58,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +73,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +90,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -103,7 +107,10 @@
 			#size-cells = <1>;
 
 			assigned-clocks	= <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 1>,
+					  <&clk_s_c0_pll1 0>,
+					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
 					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
@@ -113,14 +120,21 @@
 
 			assigned-clock-parents = <0>,
 						 <0>,
+						 <0>,
+						 <&clk_s_c0_pll1 0>,
+						 <&clk_s_c0_pll1 0>,
 						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>,
 						 <&clk_s_d2_quadfs 0>;
 
-			assigned-clock-rates = <297000000>, <297000000>;
+			assigned-clock-rates = <297000000>,
+					       <108000000>,
+					       <0>,
+					       <400000000>,
+					       <400000000>;
 
 			ranges;
 
@@ -227,5 +241,23 @@
 			clock-names = "bdisp";
 			clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
 		};
+
+		hva@8c85000 {
+			compatible = "st,st-hva";
+			reg = <0x8c85000 0x400>, <0x6000000 0x40000>;
+			reg-names = "hva_registers", "hva_esram";
+			interrupts = <GIC_SPI 58 IRQ_TYPE_NONE>,
+				     <GIC_SPI 59 IRQ_TYPE_NONE>;
+			clock-names = "clk_hva";
+			clocks = <&clk_s_c0_flexgen CLK_HVA>;
+		};
+
+		thermal@91a0000 {
+			compatible = "st,stih407-thermal";
+			reg = <0x91a0000 0x28>;
+			clock-names = "thermal";
+			clocks = <&clk_sysin>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 3791ad9..bd028ce 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -54,7 +54,7 @@
 
 			pio0: gpio@fe610000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -62,7 +62,7 @@
 			};
 			pio1: gpio@fe611000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -70,7 +70,7 @@
 			};
 			pio2: gpio@fe612000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -78,7 +78,7 @@
 			};
 			pio3: gpio@fe613000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -86,7 +86,7 @@
 			};
 			pio4: gpio@fe614000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -208,7 +208,7 @@
 
 			pio5: gpio@fee00000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -216,7 +216,7 @@
 			};
 			pio6: gpio@fee01000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -224,7 +224,7 @@
 			};
 			pio7: gpio@fee02000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -232,7 +232,7 @@
 			};
 			pio8: gpio@fee03000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -240,7 +240,7 @@
 			};
 			pio9: gpio@fee04000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -248,7 +248,7 @@
 			};
 			pio10: gpio@fee05000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -256,7 +256,7 @@
 			};
 			pio11: gpio@fee06000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x6000 0x100>;
@@ -264,7 +264,7 @@
 			};
 			pio12: gpio@fee07000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x7000 0x100>;
@@ -303,7 +303,7 @@
 
 			pio13: gpio@fe820000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -311,7 +311,7 @@
 			};
 			pio14: gpio@fe821000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -319,7 +319,7 @@
 			};
 			pio15: gpio@fe822000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -327,7 +327,7 @@
 			};
 			pio16: gpio@fe823000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -335,7 +335,7 @@
 			};
 			pio17: gpio@fe824000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -343,7 +343,7 @@
 			};
 			pio18: gpio@fe825000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -465,7 +465,7 @@
 
 			pio100: gpio@fd6b0000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -473,7 +473,7 @@
 			};
 			pio101: gpio@fd6b1000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -481,7 +481,7 @@
 			};
 			pio102: gpio@fd6b2000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -502,7 +502,7 @@
 
 			pio103: gpio@fd330000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -510,7 +510,7 @@
 			};
 			pio104: gpio@fd331000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -518,7 +518,7 @@
 			};
 			pio105: gpio@fd332000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -526,7 +526,7 @@
 			};
 			pio106: gpio@fd333000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -534,7 +534,7 @@
 			};
 			pio107: gpio@fd334000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index f1ceee1..de320cd 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -9,6 +9,7 @@
 /dts-v1/;
 #include "stih416.dtsi"
 #include "stih41x-b2020.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "STiH416 B2020 REV-E";
 	compatible = "st,stih416-b2020", "st,stih416";
@@ -17,13 +18,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells		= <1>;
 				label			= "Front Panel LED";
-				gpios			= <&pio4 1>;
+				gpios			= <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger	= "heartbeat";
 			};
 			green {
-				gpios			= <&pio1 3>;
+				gpios			= <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state 		= "off";
 			};
 		};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 051fc16..9c97f7e6 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -58,7 +58,7 @@
 
 			pio0: gpio@fe610000 {
 				gpio-controller;
-				#gpio-cells = <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -66,7 +66,7 @@
 			};
 			pio1: gpio@fe611000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -74,7 +74,7 @@
 			};
 			pio2: gpio@fe612000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -82,7 +82,7 @@
 			};
 			pio3: gpio@fe613000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -90,7 +90,7 @@
 			};
 			pio4: gpio@fe614000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -98,7 +98,7 @@
 			};
 			pio40: gpio@fe615000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -221,11 +221,14 @@
 				pinctrl_pwm1_chan0_default: pwm1-0-default {
 					st,pins {
 						pwm-out    = <&pio3 0 ALT1 OUT>;
+						pwm-capturein = <&pio3 2 ALT1 IN>;
+
 					};
 				};
 				pinctrl_pwm1_chan1_default: pwm1-1-default {
 					st,pins {
 						pwm-out    = <&pio4 4 ALT1 OUT>;
+						pwm-capturein = <&pio4 3 ALT1 IN>;
 					};
 				};
 				pinctrl_pwm1_chan2_default: pwm1-2-default {
@@ -254,7 +257,7 @@
 
 			pio5: gpio@fee00000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -262,7 +265,7 @@
 			};
 			pio6: gpio@fee01000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -270,7 +273,7 @@
 			};
 			pio7: gpio@fee02000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -278,7 +281,7 @@
 			};
 			pio8: gpio@fee03000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -286,7 +289,7 @@
 			};
 			pio9: gpio@fee04000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -294,7 +297,7 @@
 			};
 			pio10: gpio@fee05000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -302,7 +305,7 @@
 			};
 			pio11: gpio@fee06000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x6000 0x100>;
@@ -310,7 +313,7 @@
 			};
 			pio12: gpio@fee07000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x7000 0x100>;
@@ -318,7 +321,7 @@
 			};
 			pio30: gpio@fee08000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x8000 0x100>;
@@ -326,7 +329,7 @@
 			};
 			pio31: gpio@fee09000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x9000 0x100>;
@@ -337,6 +340,7 @@
 				pinctrl_pwm0_chan0_default: pwm0-0-default {
 					st,pins {
 						pwm-out    = <&pio9 7 ALT2 OUT>;
+						pwm-capturein = <&pio9 6 ALT2 IN>;
 					};
 				};
 			};
@@ -404,7 +408,7 @@
 
 			pio13: gpio@fe820000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -412,7 +416,7 @@
 			};
 			pio14: gpio@fe821000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -420,7 +424,7 @@
 			};
 			pio15: gpio@fe822000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -428,7 +432,7 @@
 			};
 			pio16: gpio@fe823000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -436,7 +440,7 @@
 			};
 			pio17: gpio@fe824000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
@@ -444,7 +448,7 @@
 			};
 			pio18: gpio@fe825000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x5000 0x100>;
@@ -576,6 +580,7 @@
 				pinctrl_pwm0_chan1_default: pwm0-1-default {
 					st,pins {
 						pwm-out    = <&pio13 2 ALT2 OUT>;
+						pwm-capturein = <&pio13 1 ALT2 IN>;
 					};
 				};
 				pinctrl_pwm0_chan2_default: pwm0-2-default {
@@ -605,7 +610,7 @@
 
 			pio100: gpio@fd6b0000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -613,7 +618,7 @@
 			};
 			pio101: gpio@fd6b1000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -621,7 +626,7 @@
 			};
 			pio102: gpio@fd6b2000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -642,7 +647,7 @@
 
 			pio103: gpio@fd330000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0 0x100>;
@@ -650,7 +655,7 @@
 			};
 			pio104: gpio@fd331000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x1000 0x100>;
@@ -658,7 +663,7 @@
 			};
 			pio105: gpio@fd332000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x2000 0x100>;
@@ -666,7 +671,7 @@
 			};
 			pio106: gpio@fd333000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x3000 0x100>;
@@ -675,7 +680,7 @@
 
 			pio107: gpio@fd334000 {
 				gpio-controller;
-				#gpio-cells	= <1>;
+				#gpio-cells	= <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg		= <0x4000 0x100>;
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 9e3170c..fe1f9cf77 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -474,6 +474,7 @@
 			status		= "disabled";
 			#pwm-cells	= <2>;
 			reg		= <0xfed10000 0x68>;
+			interrupts      = <GIC_SPI 200 IRQ_TYPE_NONE>;
 
 			pinctrl-names	= "default";
 			pinctrl-0 = 	<&pinctrl_pwm0_chan0_default
@@ -481,9 +482,11 @@
 					&pinctrl_pwm0_chan2_default
 					&pinctrl_pwm0_chan3_default>;
 
-			clock-names	= "pwm";
-			clocks		= <&clk_sysin>;
+			clock-names	= "pwm", "capture";
+			clocks		= <&clk_sysin>, <&clk_s_a0_ls CLK_ICN_REG>;
+
 			st,pwm-num-chan = <4>;
+			st,capture-num-chan = <2>;
 		};
 
 		/* SBC PWM Module */
@@ -492,6 +495,7 @@
 			status		= "disabled";
 			#pwm-cells	= <2>;
 			reg		= <0xfe510000 0x68>;
+			interrupts      = <GIC_SPI 202 IRQ_TYPE_NONE>;
 
 			pinctrl-names	= "default";
 			pinctrl-0	= <&pinctrl_pwm1_chan0_default
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 772d2bb..438e54c 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "stih418.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "STiH418 B2199";
 	compatible = "st,stih418-b2199", "st,stih418";
@@ -35,14 +36,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells = <2>;
 				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
+				gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 			};
 			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
@@ -86,6 +85,7 @@
 			sd-uhs-sdr50;
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
+			non-removable;
 		};
 
 		miphy28lp_phy: miphy28lp@9b22000 {
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index ae6d997..ee6614b7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-clkgen-plla9";
 
 				clocks = <&clk_sysin>;
 
@@ -98,7 +98,7 @@
 
 			clk_s_a0_pll: clk-s-a0-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -120,7 +120,7 @@
 
 		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			compatible = "st,quadfs-pll";
 			reg = <0x9103000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -137,7 +137,7 @@
 
 			clk_s_c0_pll0: clk-s-c0-pll0 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll0";
 
 				clocks = <&clk_sysin>;
 
@@ -146,7 +146,7 @@
 
 			clk_s_c0_pll1: clk-s-c0-pll1 {
 				#clock-cells = <1>;
-				compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32";
+				compatible = "st,clkgen-pll1";
 
 				clocks = <&clk_sysin>;
 
@@ -212,7 +212,7 @@
 
 		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9104000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -229,7 +229,7 @@
 
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-audio", "st,flexgen";
 
 				clocks = <&clk_s_d0_quadfs 0>,
 					 <&clk_s_d0_quadfs 1>,
@@ -248,7 +248,7 @@
 
 		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9106000 0x1000>;
 
 			clocks = <&clk_sysin>;
@@ -271,7 +271,7 @@
 
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
-				compatible = "st,flexgen";
+				compatible = "st,flexgen-video", "st,flexgen";
 
 				clocks = <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>,
@@ -309,7 +309,7 @@
 
 		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
 			#clock-cells = <1>;
-			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			compatible = "st,quadfs";
 			reg = <0x9107000 0x1000>;
 
 			clocks = <&clk_sysin>;
diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index 5f91f45..9bfa067 100644
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -7,6 +7,8 @@
  * publishhed by the Free Software Foundation.
  */
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 
 	memory{
@@ -33,9 +35,8 @@
 		leds {
 			compatible	= "gpio-leds";
 			fp_led {
-				#gpio-cells = <1>;
 				label	= "Front Panel LED";
-				gpios	= <&pio105 7>;
+				gpios	= <&pio105 7 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger	= "heartbeat";
 			};
 		};
diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index 487d7d8..322e0e9 100644
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -7,6 +7,7 @@
  * publishhed by the Free Software Foundation.
  */
 #include "stih41x-b2020x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	memory{
 		device_type = "memory";
@@ -30,13 +31,12 @@
 		leds {
 			compatible	= "gpio-leds";
 			red {
-				#gpio-cells = <1>;
 				label	= "Front Panel LED";
-				gpios	= <&pio4 1>;
+				gpios	= <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger	= "heartbeat";
 			};
 			green {
-				gpios	= <&pio4 7>;
+				gpios	= <&pio4 7 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 133375b..ed2b7a9 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -18,14 +18,12 @@
 		leds {
 			compatible = "gpio-leds";
 			red {
-				#gpio-cells = <2>;
 				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
+				gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 			};
 			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
+				gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
 				default-state = "off";
 			};
 		};
@@ -65,6 +63,7 @@
 		};
 
 		mmc0: sdhci@09060000 {
+			non-removable;
 			status = "okay";
 		};
 
@@ -135,5 +134,50 @@
 				dvb-card	= <STV0367_TDA18212_NIMA_1>;
 			};
 		};
+
+		sti_uni_player2: sti-uni-player@8d82000 {
+			status = "okay";
+		};
+
+		sti_uni_player3: sti-uni-player@8d85000 {
+			status = "okay";
+		};
+
+		sti_sasg_codec: sti-sasg-codec {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spdif_out>;
+		};
+
+		sound {
+			compatible = "simple-audio-card";
+			simple-audio-card,name = "sti audio card";
+			status = "okay";
+
+			simple-audio-card,dai-link@0 {
+				/* DAC */
+				format = "i2s";
+				mclk-fs = <256>;
+				cpu {
+					sound-dai = <&sti_uni_player2>;
+				};
+
+				codec {
+					sound-dai = <&sti_sasg_codec 1>;
+				};
+			};
+			simple-audio-card,dai-link@1 {
+				/* SPDIF */
+				format = "left_j";
+				mclk-fs = <128>;
+				cpu {
+					sound-dai = <&sti_uni_player3>;
+				};
+
+				codec {
+					sound-dai = <&sti_sasg_codec 0>;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 35df462..336ee4f 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -45,6 +45,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 
@@ -176,6 +177,14 @@
 			reg = <0x40013800 0x400>;
 		};
 
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
 		pin-controller {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -326,6 +335,7 @@
 		};
 
 		rcc: rcc@40023810 {
+			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
 			reg = <0x40023800 0x400>;
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index f3cb297..5f98582 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -121,10 +121,6 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
 &otg_sram {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
new file mode 100644
index 0000000..b1e2afd
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Empire Electronix M712 tablet";
+	compatible = "empire-electronix,m712", "allwinner,sun5i-a13";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
index 1b11ec9..439ae3b 100644
--- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
+++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
@@ -42,171 +42,9 @@
 
 /dts-v1/;
 #include "sun5i-a13.dtsi"
-#include "sunxi-common-regulators.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun5i-reference-design-tablet.dtsi"
 
 / {
 	model = "INet-98V Rev 02";
 	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
-
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	axp209: pmic@34 {
-		reg = <0x34>;
-		interrupts = <0>;
-	};
-};
-
-#include "axp209.dtsi"
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-
-	pcf8563: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_ldo2>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-	cd-inverted;
-	status = "okay";
-};
-
-&otg_sram {
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
-		allwinner,pins = "PG0";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
-		allwinner,pins = "PG1";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
-		allwinner,pins = "PG2";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1250000>;
-	regulator-max-microvolt = <1250000>;
-	regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_ldo3 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_usb0_vbus {
-	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usb0_vbus_pin_a {
-	allwinner,pins = "PG12";
-};
-
-&usbphy {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
-	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
-	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-	usb0_vbus-supply = <&reg_usb0_vbus>;
-	usb1_vbus-supply = <&reg_ldo3>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index e012890..a17ba02 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -84,7 +84,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
index f694482..b68a123 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -64,6 +64,16 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
 };
 
 &be0 {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 1867af2..ce196045 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -47,7 +47,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun6i-a31-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -65,7 +67,10 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
+				 <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
+				 <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
 			status = "disabled";
 		};
 
@@ -73,7 +78,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
+				 <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
+				 <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
 			status = "disabled";
 		};
 	};
@@ -97,7 +104,7 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&cpu>;
+			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
 				/* kHz	  uV */
@@ -192,235 +199,6 @@
 			clock-output-names = "osc32k";
 		};
 
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-
-			/*
-			 * Clock AHB1 from PLL6, instead of CPU/AXI which
-			 * has rate changes due to cpufreq. Also the DMA
-			 * controller requires AHB1 clocked from PLL6.
-			 */
-			assigned-clocks = <&ahb1>;
-			assigned-clock-parents = <&pll6 0>;
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-					<6>, <8>, <9>,
-					<10>, <11>, <12>,
-					<13>, <14>,
-					<17>, <18>, <19>,
-					<20>, <21>, <22>,
-					<23>, <24>, <26>,
-					<27>, <29>,
-					<30>, <31>, <32>,
-					<36>, <37>, <40>,
-					<43>, <44>, <45>,
-					<46>, <47>, <50>,
-					<52>, <55>, <56>,
-					<57>, <58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
-					"ahb1_nand0", "ahb1_sdram",
-					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
-					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
-					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
-					"ahb1_ehci1", "ahb1_ohci0",
-					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
-					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
-					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
-					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
-					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
-					"ahb1_drc0", "ahb1_drc1";
-		};
-
-		apb1: apb1@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <4>,
-					<5>, <12>,
-					<13>;
-			clock-output-names = "apb1_codec", "apb1_digital_mic",
-					"apb1_pio", "apb1_daudio0",
-					"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <3>, <16>,
-					<17>, <18>, <19>,
-					<20>, <21>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					     "apb2_i2c2", "apb2_i2c3",
-					     "apb2_uart0", "apb2_uart1",
-					     "apb2_uart2", "apb2_uart3",
-					     "apb2_uart4", "apb2_uart5";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		mmc3_clk: clk@01c20094 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20094 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc3",
-					     "mmc3_output",
-					     "mmc3_sample";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi2";
-		};
-
-		spi3_clk: clk@01c200ac {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200ac 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "spi3";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-indices = <8>, <9>, <10>,
-					<16>, <17>,
-					<18>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
-					     "usb_ohci0", "usb_ohci1",
-					     "usb_ohci2";
-		};
-
 		/*
 		 * The following two are dummy clocks, placeholders
 		 * used in the gmac_tx clock. The gmac driver will
@@ -463,23 +241,23 @@
 			compatible = "allwinner,sun6i-a31-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_AHB1_DMA>;
+			resets = <&ccu RST_AHB1_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_AHB1_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -488,17 +266,17 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_AHB1_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -507,17 +285,17 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_AHB1_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -526,17 +304,17 @@
 		};
 
 		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>,
-				 <&mmc3_clk 0>,
-				 <&mmc3_clk 1>,
-				 <&mmc3_clk 2>;
+			clocks = <&ccu CLK_AHB1_MMC3>,
+				 <&ccu CLK_MMC3>,
+				 <&ccu CLK_MMC3_OUTPUT>,
+				 <&ccu CLK_MMC3_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 11>;
+			resets = <&ccu RST_AHB1_MMC3>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -547,8 +325,8 @@
 		usb_otg: usb@01c19000 {
 			compatible = "allwinner,sun6i-a31-musb";
 			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
+			clocks = <&ccu CLK_AHB1_OTG>;
+			resets = <&ccu RST_AHB1_OTG>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc";
 			phys = <&usbphy 0>;
@@ -565,15 +343,15 @@
 			reg-names = "phy_ctrl",
 				    "pmu1",
 				    "pmu2";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>,
-				 <&usb_clk 10>;
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
 			clock-names = "usb0_phy",
 				      "usb1_phy",
 				      "usb2_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>,
-				 <&usb_clk 2>;
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
 			reset-names = "usb0_reset",
 				      "usb1_reset",
 				      "usb2_reset";
@@ -585,8 +363,8 @@
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_AHB1_EHCI0>;
+			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -596,8 +374,8 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -607,8 +385,8 @@
 			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
 			reg = <0x01c1b000 0x100>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 27>;
-			resets = <&ahb1_rst 27>;
+			clocks = <&ccu CLK_AHB1_EHCI1>;
+			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -618,8 +396,8 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1b400 0x100>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
-			resets = <&ahb1_rst 30>;
+			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
 			phy-names = "usb";
 			status = "disabled";
@@ -629,11 +407,20 @@
 			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
 			reg = <0x01c1c400 0x100>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
-			resets = <&ahb1_rst 31>;
+			clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_AHB1_OHCI2>;
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun6i-a31-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -641,7 +428,7 @@
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_APB1_PIO>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -762,24 +549,6 @@
 			};
 		};
 
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-ahb1-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
@@ -816,8 +585,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_APB2_UART0>;
+			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -829,8 +598,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_APB2_UART1>;
+			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -842,8 +611,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_APB2_UART2>;
+			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -855,8 +624,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_APB2_UART3>;
+			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -868,8 +637,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_APB2_UART4>;
+			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -881,8 +650,8 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 21>;
-			resets = <&apb2_rst 21>;
+			clocks = <&ccu CLK_APB2_UART5>;
+			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -892,8 +661,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_APB2_I2C0>;
+			resets = <&ccu RST_APB2_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -903,8 +672,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_APB2_I2C1>;
+			resets = <&ccu RST_APB2_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -914,8 +683,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_APB2_I2C2>;
+			resets = <&ccu RST_APB2_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -925,8 +694,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 3>;
-			resets = <&apb2_rst 3>;
+			clocks = <&ccu CLK_APB2_I2C3>;
+			resets = <&ccu RST_APB2_I2C3>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -937,9 +706,9 @@
 			reg = <0x01c30000 0x1054>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+			clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
 			clock-names = "stmmaceth", "allwinner_gmac_tx";
-			resets = <&ahb1_rst 17>;
+			resets = <&ccu RST_AHB1_EMAC>;
 			reset-names = "stmmaceth";
 			snps,pbl = <2>;
 			snps,fixed-burst;
@@ -953,9 +722,9 @@
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_AHB1_SS>;
 			reset-names = "ahb";
 		};
 
@@ -967,19 +736,19 @@
 				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 19>;
-			resets = <&ahb1_rst 19>;
+			clocks = <&ccu CLK_AHB1_HSTIMER>;
+			resets = <&ccu RST_AHB1_HSTIMER>;
 		};
 
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 20>, <&spi0_clk>;
+			clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 23>, <&dma 23>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 20>;
+			resets = <&ccu RST_AHB1_SPI0>;
 			status = "disabled";
 		};
 
@@ -987,11 +756,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c69000 0x1000>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 21>, <&spi1_clk>;
+			clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 24>, <&dma 24>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 21>;
+			resets = <&ccu RST_AHB1_SPI1>;
 			status = "disabled";
 		};
 
@@ -999,11 +768,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6a000 0x1000>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 22>, <&spi2_clk>;
+			clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 25>, <&dma 25>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 22>;
+			resets = <&ccu RST_AHB1_SPI2>;
 			status = "disabled";
 		};
 
@@ -1011,11 +780,11 @@
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c6b000 0x1000>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 23>, <&spi3_clk>;
+			clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
 			clock-names = "ahb", "mod";
 			dmas = <&dma 26>, <&dma 26>;
 			dma-names = "rx", "tx";
-			resets = <&ahb1_rst 23>;
+			resets = <&ccu RST_AHB1_SPI3>;
 			status = "disabled";
 		};
 
@@ -1052,8 +821,9 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
-					 <&pll6 0>;
+				clocks = <&osc32k>, <&osc24M>,
+					 <&ccu CLK_PLL_PERIPH>,
+					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
 			};
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index e182eec..882a4d8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -42,32 +42,11 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun6i-reference-design-tablet.dtsi"
 
 / {
 	model = "Colorfly E708 Q1 tablet";
 	compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&cpu0 {
-	cpu-supply = <&reg_dcdc3>;
-};
-
-&ehci0 {
-	/* rtl8188etv wifi is connected here */
-	status = "okay";
 };
 
 &lradc {
@@ -82,103 +61,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
-	vmmc-supply = <&reg_dcdc1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mma8452_int_e708_q1: mma8452_int_pin@0 {
-		allwinner,pins = "PA9";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-
-	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-		allwinner,pins = "PA8";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&p2wi {
-	status = "okay";
-
-	axp22x: pmic@68 {
-		compatible = "x-powers,axp221";
-		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpus"; /* This is an educated guess */
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-	regulator-always-on;
-	regulator-min-microvolt = <700000>;
-	regulator-max-microvolt = <1320000>;
-	regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
 &reg_dldo2 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -186,23 +68,5 @@
 };
 
 &simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
 	vcc-pg-supply = <&reg_dldo2>;
 };
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp221 pmic on the board.
- *
- * Once we have axp221 power-supply and vbus-usb support we should switch
- * to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
new file mode 100644
index 0000000..e584e6b
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sun6i-reference-design-tablet.dtsi"
+
+/ {
+	model = "iNet Q972 tablet";
+	compatible = "inet-tek,inet-q972", "allwinner,sun6i-a31s";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@900 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <900000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
new file mode 100644
index 0000000..0c43430
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* Wifi is connected here */
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		drivevbus-supply = <&reg_vcc5v0>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index bd0c476..94cf5a1 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -905,7 +905,7 @@
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ahb_gates 8>,
 				 <&mmc0_clk 0>,
@@ -922,7 +922,7 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&ahb_gates 9>,
 				 <&mmc1_clk 0>,
@@ -939,7 +939,7 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&ahb_gates 10>,
 				 <&mmc2_clk 0>,
@@ -956,7 +956,7 @@
 		};
 
 		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c12000 0x1000>;
 			clocks = <&ahb_gates 11>,
 				 <&mmc3_clk 0>,
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 7e05e09..48fc24f 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -46,7 +46,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -60,7 +62,9 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
+			clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
+				 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
 			status = "disabled";
 		};
 	};
@@ -111,143 +115,6 @@
 			clock-frequency = <32768>;
 			clock-output-names = "osc32k";
 		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll5: pll5_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll5";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-indices = <0>, <5>,
-					<12>, <13>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-indices = <0>, <1>,
-					<2>, <16>,
-					<17>, <18>,
-					<19>, <20>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			compatible = "allwinner,sun8i-a23-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
-					     "usb_hsic_12M", "usb_ohci0";
-		};
 	};
 
 	soc@01c00000 {
@@ -260,23 +127,23 @@
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
 			#dma-cells = <1>;
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 8>;
+			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -285,17 +152,17 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 9>;
+			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -304,17 +171,17 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
-			resets = <&ahb1_rst 10>;
+			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -322,12 +189,55 @@
 			#size-cells = <0>;
 		};
 
+		nfc: nand@01c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_NAND>;
+			reset-names = "ahb";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c19000 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			/*
+			 * compatible and address regions get set in
+			 * SoC specific dtsi file
+			 */
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
 		ehci0: usb@01c1a000 {
 			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 26>;
-			resets = <&ahb1_rst 26>;
+			clocks = <&ccu CLK_BUS_EHCI>;
+			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
@@ -337,18 +247,26 @@
 			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
-			resets = <&ahb1_rst 29>;
+			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
+			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
 		};
 
+		ccu: clock@01c20000 {
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&apb1_gates 5>;
+			clocks = <&ccu CLK_BUS_PIO>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -361,6 +279,16 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PG6", "PG7";
+				allwinner,function = "uart1";
+			};
+
+			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
+				allwinner,pins = "PG8", "PG9";
+				allwinner,function = "uart1";
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
@@ -414,24 +342,16 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
-		};
 
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
+			lcd_rgb666_pins: lcd-rgb666@0 {
+				allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
+						 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+			                         "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+			                         "PD24", "PD25", "PD26", "PD27";
+				allwinner,function = "lcd0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -469,8 +389,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -482,8 +402,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -495,8 +415,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -508,8 +428,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -521,8 +441,8 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
@@ -532,8 +452,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,8 +463,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -554,8 +474,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
index b2ce284..e3c7a25 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -42,70 +42,27 @@
 
 /dts-v1/;
 #include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-#include <dt-bindings/pwm/pwm.h>
+#include "sun8i-reference-design-tablet.dtsi"
 
 / {
 	model = "Allwinner GT90H Dual Core Tablet (v4)";
 	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_gt90h>;
-		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
-		default-brightness-level = <8>;
-		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
 };
 
 &ehci0 {
 	status = "okay";
 };
 
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-gt90h.fw";
+	touchscreen-size-x = <1792>;
+	touchscreen-size-y = <1024>;
 	status = "okay";
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-
 	button@600 {
 		label = "Back";
 		linux,code = <KEY_BACK>;
@@ -114,144 +71,6 @@
 	};
 };
 
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
-	vmmc-supply = <&reg_aldo1>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	bl_en_pin_gt90h: bl_en_pin@0 {
-		allwinner,pins = "PH6";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
-	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins>;
-	status = "okay";
-};
-
-&r_rsb {
-	status = "okay";
-
-	axp22x: pmic@3a3 {
-		compatible = "x-powers,axp223";
-		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		eldoin-supply = <&reg_dcdc1>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-io";
-};
-
-&reg_aldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <2350000>;
-	regulator-max-microvolt = <2650000>;
-	regulator-name = "vdd-dll";
-};
-
-&reg_aldo3 {
-	regulator-always-on;
-	regulator-min-microvolt = <2700000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-pll-avcc";
-};
-
-&reg_dc1sw {
-	regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpus";
-};
-
-&reg_dcdc1 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-sys";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <900000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc5 {
-	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
-	regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-	regulator-name = "vcc-wifi";
-};
-
-&reg_rtc_ldo {
-	regulator-name = "vcc-rtc";
-};
-
-&simplefb_lcd {
-	vcc-lcd-supply = <&reg_dc1sw>;
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
index 0f9f71b..d440575 100644
--- a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
+++ b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
@@ -53,6 +53,15 @@
 	status = "okay";
 };
 
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-inet86dz.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	status = "okay";
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
index e300442..a86cbed 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -47,4 +47,72 @@
 / {
 	model = "Polaroid MID2407PXE03 tablet";
 	compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&i2c1 {
+	mma7660: accelerometer@4c {
+		reg = <0x4c>;
+		compatible = "fsl,mma7660";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl1680";
+	firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
+	touchscreen-size-x = <960>;
+	touchscreen-size-y = <640>;
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	vddio-supply = <&reg_ldo_io1>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
index 6d06e24..9955f85 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -47,4 +47,55 @@
 / {
 	model = "Polaroid MID2809PXE04 tablet";
 	compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23";
+
+	aliases {
+		ethernet0 = &esp8089;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	esp8089: sdio_wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+		esp,crystal-26M-en = <2>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3670";
+	firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
+	touchscreen-size-x = <1660>;
+	touchscreen-size-y = <890>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 92e6616..54d045d 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -48,74 +48,10 @@
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
+};
 
-	clocks {
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <6>,
-					<8>, <9>, <10>,
-					<13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-			clock-output-names = "mbus";
-		};
-	};
-
-	soc@01c00000 {
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun6i-a31-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a23-usb-phy";
-			reg = <0x01c19400 0x10>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
-			status = "disabled";
-			#phy-cells = <1>;
-		};
-	};
+&ccu {
+	compatible = "allwinner,sun8i-a23-ccu";
 };
 
 &pio {
@@ -124,3 +60,13 @@
 		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&usb_otg {
+	compatible = "allwinner,sun6i-a31-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a23-usb-phy";
+	reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
index 6566032..f711599 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -47,12 +47,27 @@
 / {
 	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
 	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		/* Make u-boot set mac-address for rtl8703as (no eeprom) */
+		ethernet0 = &rtl8703as;
+	};
 };
 
 &ehci0 {
 	status = "okay";
 };
 
+&touchscreen {
+	reg = <0x40>;
+	compatible = "silead,gsl3675";
+	firmware-name = "gsl3675-ga10h.fw";
+	touchscreen-size-x = <1630>;
+	touchscreen-size-y = <990>;
+	touchscreen-inverted-y;
+	status = "okay";
+};
+
 &lradc {
 	button@600 {
 		label = "Back";
@@ -62,6 +77,19 @@
 	};
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8703as: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
 &ohci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
new file mode 100644
index 0000000..fb46655
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
@@ -0,0 +1,108 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-reference-design-tablet.dtsi"
+
+/ {
+	model = "INet-D978 Rev 02";
+	compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		/* Delete debug UART as serial0 is the UART for bluetooth */
+		/delete-property/stdout-path;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_d978>;
+
+		home {
+			label = "d978:blue:home";
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		};
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&r_pio {
+	led_pin_d978: led_pin_d978@0 {
+		allwinner,pins = "PL5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_uart {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>,
+		    <&uart1_pins_cts_rts_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
new file mode 100644
index 0000000..9ea637e
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2016 - Stefan Mavrodiev <stefan.mavrodiev@gmail.com>
+ *                  Olimex LTD. <support@olimex.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Olimex A33-OLinuXino";
+	compatible = "olimex,a33-olinuxino","allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_olinuxino>;
+
+		green {
+			label = "a33-olinuxino:green:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_olinuxino: led_pins@0 {
+		allwinner,pins = "PB7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 001d840..fd1e1cd 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -59,107 +59,179 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-a33-display-engine";
+		allwinner,pipelines = <&fe0>;
+		status = "disabled";
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
 
-	clocks {
-		/* Dummy clock for pll11 (DDR1) until actually implemented */
-		pll11: pll11_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll11";
-		};
+	soc@01c00000 {
+		tcon0: lcd-controller@01c0c000 {
+			compatible = "allwinner,sun8i-a33-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LCD>,
+				 <&ccu CLK_LCD_CH0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-pixel-clock";
+			resets = <&ccu RST_BUS_LCD>;
+			reset-names = "lcd";
+			status = "disabled";
 
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <5>,
-				        <6>, <8>, <9>,
-				        <10>, <13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <53>,
-					<54>, <57>,
-					<58>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
-					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
-					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_msgbox",
-					"ahb1_spinlock", "ahb1_drc",
-					"ahb1_sat";
-		};
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "ss";
-		};
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
 
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
-			clock-output-names = "mbus";
+					tcon0_in_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
 		};
-	};
 
-	soc@01c00000 {
 		crypto: crypto-engine@01c15000 {
 			compatible = "allwinner,sun4i-a10-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
 			clock-names = "ahb", "mod";
-			resets = <&ahb1_rst 5>;
+			resets = <&ccu RST_BUS_SS>;
 			reset-names = "ahb";
 		};
 
-		usb_otg: usb@01c19000 {
-			compatible = "allwinner,sun8i-a33-musb";
-			reg = <0x01c19000 0x0400>;
-			clocks = <&ahb1_gates 24>;
-			resets = <&ahb1_rst 24>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc";
-			phys = <&usbphy 0>;
-			phy-names = "usb";
-			extcon = <&usbphy 0>;
+		fe0: display-frontend@01e00000 {
+			compatible = "allwinner,sun8i-a33-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
+				 <&ccu CLK_DRAM_DE_FE>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_BUS_DE_FE>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+				};
+			};
 		};
 
-		usbphy: phy@01c19400 {
-			compatible = "allwinner,sun8i-a33-usb-phy";
-			reg = <0x01c19400 0x14>,
-			      <0x01c1a800 0x4>;
-			reg-names = "phy_ctrl",
-				    "pmu1";
-			clocks = <&usb_clk 8>,
-				 <&usb_clk 9>;
-			clock-names = "usb0_phy",
-				      "usb1_phy";
-			resets = <&usb_clk 0>,
-				 <&usb_clk 1>;
-			reset-names = "usb0_reset",
-				      "usb1_reset";
-			status = "disabled";
-			#phy-cells = <1>;
+		be0: display-backend@01e60000 {
+			compatible = "allwinner,sun8i-a33-display-backend";
+			reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+			reg-names = "be", "sat";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+				 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+			clock-names = "ahb", "mod",
+				      "ram", "sat";
+			resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+			reset-names = "be", "sat";
+			assigned-clocks = <&ccu CLK_DE_BE>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_drc0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&drc0_in_be0>;
+					};
+				};
+			};
+		};
+
+		drc0: drc@01e70000 {
+			compatible = "allwinner,sun8i-a33-drc";
+			reg = <0x01e70000 0x10000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
+				 <&ccu CLK_DRAM_DRC>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_DRC>;
+
+			assigned-clocks = <&ccu CLK_DRC>;
+			assigned-clock-rates = <300000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				drc0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					drc0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_drc0>;
+					};
+				};
+
+				drc0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					drc0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_drc0>;
+					};
+				};
+			};
 		};
 	};
 };
 
+&ccu {
+	compatible = "allwinner,sun8i-a33-ccu";
+};
+
 &pio {
 	compatible = "allwinner,sun8i-a33-pinctrl";
 	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@@ -173,3 +245,13 @@
 	};
 
 };
+
+&usb_otg {
+	compatible = "allwinner,sun8i-a33-musb";
+};
+
+&usbphy {
+	compatible = "allwinner,sun8i-a33-usb-phy";
+	reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
+	reg-names = "phy_ctrl", "pmu1";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
index f3b1d5f..06fddaa 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
@@ -185,7 +185,7 @@
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_a>;
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
new file mode 100644
index 0000000..3d64caf
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led-pins {
+		allwinner,pins = "PA10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led-pins {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
index f93f5d1..e5bcaba 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
@@ -54,6 +54,8 @@
 
 	aliases {
 		serial0 = &uart0;
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189;
 	};
 
 	chosen {
@@ -131,6 +133,14 @@
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189: sdio_wifi@1 {
+		reg = <1>;
+	};
 };
 
 &pio {
@@ -176,6 +186,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usb1_vbus_pin_a {
 	allwinner,pins = "PG13";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
new file mode 100644
index 0000000..1550fee
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Lite";
+	compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+	aliases {
+		/* The H3 emac is not used so the wifi is ethernet0 */
+		ethernet0 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		pwr_led {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status_led {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 0adf932..5c9b5bf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -139,6 +139,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
new file mode 100644
index 0000000..851fd2c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The Orange Pi PC Plus is an extended version of the regular PC */
+#include "sun8i-h3-orangepi-pc.dts"
+
+/ {
+	model = "Xunlong Orange Pi PC Plus";
+	compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet1 = &rtl8189ftv;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+	/* eMMC is missing pull-ups */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
index daf50b9a6..3ec9712 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
@@ -161,6 +161,24 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index b0cb417..bb58591 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -44,7 +44,7 @@
 #include "sun8i-h3-orangepi-2.dts"
 
 / {
-	model = "Xunlong Orange Pi Plus";
+	model = "Xunlong Orange Pi Plus / Plus 2";
 	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
 
 	reg_usb3_vbus: usb3-vbus {
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
new file mode 100644
index 0000000..5851a47
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Orange Pi Plus 2E is an extended version of the Orange Pi PC Plus,
+ * with 2G RAM and an external gbit ethernet phy.
+ */
+
+#include "sun8i-h3-orangepi-pc-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi Plus 2E";
+	compatible = "xunlong,orangepi-plus2e", "allwinner,sun8i-h3";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index fdf9fdb..75a8654 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -150,7 +150,7 @@
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ccu CLK_BUS_MMC0>,
 				 <&ccu CLK_MMC0>,
@@ -169,7 +169,7 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&ccu CLK_BUS_MMC1>,
 				 <&ccu CLK_MMC1>,
@@ -188,7 +188,7 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun7i-a20-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&ccu CLK_BUS_MMC2>,
 				 <&ccu CLK_MMC2>,
@@ -327,6 +327,27 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			i2c0_pins: i2c0 {
+				allwinner,pins = "PA11", "PA12";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins: i2c1 {
+				allwinner,pins = "PA18", "PA19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins: i2c2 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
 						 "PF4", "PF5";
@@ -367,12 +388,33 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+			uart1_pins: uart1 {
+				allwinner,pins = "PG6", "PG7";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_rts_cts_pins: uart1_rts_cts {
+				allwinner,pins = "PG8", "PG9";
 				allwinner,function = "uart1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			uart2_pins: uart2 {
+				allwinner,pins = "PA0", "PA1";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins: uart3 {
+				allwinner,pins = "PG13", "PG14";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -389,6 +431,14 @@
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pwm: pwm@01c21400 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01c21400 0x8>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -441,6 +491,45 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
index 60fa958..29f837a 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -42,10 +42,59 @@
 #include "sunxi-reference-design-tablet.dtsi"
 #include "sun8i-reference-design-tablet.dtsi"
 
+/ {
+	aliases {
+		serial0 = &r_uart;
+		/* Make u-boot set mac-address for wifi without an eeprom */
+		ethernet0 = &sdio_wifi;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/*
+		 * Q8 boards use various PL# pins as wifi-en. On other boards
+		 * these may be connected to a wifi module output pin. To avoid
+		 * short-circuits we configure these as inputs with pull-ups via
+		 * pinctrl, instead of listing them as active-low reset-gpios.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pin_q8>;
+		/* The esp8089 needs 200 ms after driving wifi-en high */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
 &ehci0 {
 	status  = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc1_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&r_pio {
+	wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 {
+		allwinner,pins = "PL6", "PL7", "PL11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
 &usbphy {
 	usb1_vbus-supply = <&reg_dldo1>;
 };
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 9d90361..08cd001 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -63,6 +63,25 @@
 	};
 };
 
+&i2c0 {
+	/*
+	 * The gsl1680 is rated at 400KHz and it will not work reliable at
+	 * 100KHz, this has been confirmed on multiple different q8 tablets.
+	 * The gsl1680 is the only device on this bus.
+	 */
+	clock-frequency = <400000>;
+
+	touchscreen: touchscreen@0 {
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_power_pin>;
+		power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+		/* Tablet dts must provide reg and compatible */
+		status = "disabled";
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
@@ -88,6 +107,13 @@
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
+	ts_power_pin: ts_power_pin@0 {
+		allwinner,pins = "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb0_id_detect_pin: usb0_id_detect_pin@0 {
 		allwinner,pins = "PH8";
 		allwinner,function = "gpio_in";
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 1526b41..439847a 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -103,6 +103,11 @@
 	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 };
 
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
 &pio {
 	led_pins_cubieboard4: led-pins@0 {
 		allwinner,pins = "PH6", "PH17";
@@ -248,6 +253,146 @@
 			reg_rtc_ldo: rtc_ldo {
 				regulator-name = "vcc-rtc-vdd1v8-io";
 			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 7fd22e8..ceb6ef1 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -112,7 +112,8 @@
 };
 
 &ehci1 {
-	status = "okay";
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
 };
 
 &ehci2 {
@@ -152,6 +153,11 @@
 	status = "okay";
 };
 
+&osc32k {
+	/* osc32k input is from AC100 */
+	clocks = <&ac100_rtc 0>;
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -320,6 +326,146 @@
 			reg_rtc_ldo: rtc_ldo {
 				regulator-name = "vcc-rtc-vdd1v8-io";
 			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	axp806: pmic@745 {
+		compatible = "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bldoin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_s_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+
+			aldo2 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo2";
+			};
+
+			aldo3 {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's aldo's
+				 */
+				regulator-name = "s_aldo3";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vcc18-efuse-adc-display-csi";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name =
+					"vdd18-drampll-vcc18-pll-cpvdd";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_cldo1: cldo1 {
+				/*
+				 * This was 3V in the original design, but
+				 * 3.3V is the recommended supply voltage
+				 * for the Ethernet PHY.
+				 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-phy";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "afvcc-cam";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-io-wifi-codec-io2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpub";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-vpu";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <2100000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-name = "vcc-bldo-codec-ldoin";
+			};
+
+			sw {
+				/*
+				 * unused, but use a different name to
+				 * avoid name clash with axp809's sw
+				 */
+				regulator-name = "s_sw";
+			};
+		};
+	};
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
 		};
 	};
 };
@@ -338,7 +484,9 @@
 };
 
 &usbphy2 {
-	status = "okay";
+	phy-supply = <&reg_bldo4>;
+	/* Enable if HSIC peripheral is connected */
+	status = "disabled";
 };
 
 &usbphy3 {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index f68b324..3c5214c 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -148,15 +148,14 @@
 
 		/*
 		 * The 32k clock is from an external source, normally the
-		 * AC100 codec/RTC chip. This clock is by default enabled
-		 * and clocked at 32768 Hz, from the oscillator connected
-		 * to the AC100. It is configurable, but no such driver or
-		 * bindings exist yet.
+		 * AC100 codec/RTC chip. This serves as a placeholder for
+		 * board dts files to specify the source.
 		 */
 		osc32k: osc32k_clk {
 			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
 			clock-output-names = "osc32k";
 		};
 
@@ -899,8 +898,7 @@
 			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
 			r_ir_pins: r_ir {
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1dfc492..1444fbd 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -897,7 +897,7 @@
 		palmas: tps65913@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 70cf409..966a7fc 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -802,7 +802,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index 17dd145..a161fa1 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -63,7 +63,7 @@
 		palmas: pmic@58 {
 			compatible = "ti,palmas";
 			reg = <0x58>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 
 			#interrupt-cells = <2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index cb9393a..8932ea3 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -672,7 +672,7 @@
 	};
 
 	usb@7d000000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x7d000000 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -684,7 +684,7 @@
 	};
 
 	phy1: usb-phy@7d000000 {
-		compatible = "nvidia,tegra30-usb-phy";
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
@@ -708,7 +708,7 @@
 	};
 
 	usb@7d008000 {
-		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x7d008000 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		phy_type = "utmi";
@@ -720,7 +720,7 @@
 	};
 
 	phy3: usb-phy@7d008000 {
-		compatible = "nvidia,tegra30-usb-phy";
+		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 6403e0d..53994f9 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@0,70006000 {
+	serial@70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@0,70006040 {
+	serial@70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@@ -2045,44 +2045,32 @@
 	thermal-zones {
 		cpu {
 			trips {
-				trip {
+				cpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 
 		mem {
 			trips {
-				trip {
+				mem-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 
 		gpu {
 			trips {
-				trip {
+				gpu-shutdown-trip {
 					temperature = <101000>;
 					hysteresis = <0>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				/* There are currently no cooling maps because there are no cooling devices */
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index ea340f9..187a36c 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -851,7 +851,9 @@
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -859,6 +861,15 @@
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
 	};
 
 	dfll: clock@70110000 {
@@ -1154,6 +1165,26 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
 		};
 
 		mem {
@@ -1162,6 +1193,21 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
 		};
 
 		gpu {
@@ -1170,6 +1216,26 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
 		};
 
 		pllx {
@@ -1178,6 +1244,21 @@
 
 			thermal-sensors =
 				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
index 03f60ec..8c8a851 100644
--- a/arch/arm/boot/dts/uniphier-common32.dtsi
+++ b/arch/arm/boot/dts/uniphier-common32.dtsi
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source commonly used by UniPhier ARM SoCs
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,6 +46,11 @@
 /include/ "skeleton.dtsi"
 
 / {
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			#clock-cells = <0>;
@@ -66,7 +72,7 @@
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -76,7 +82,7 @@
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -86,7 +92,7 @@
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -96,7 +102,7 @@
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 		};
 
 		system_bus: system-bus@58c00000 {
@@ -114,6 +120,34 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				#reset-cells = <1>;
+			};
+		};
+
 		timer@60000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x60000200 0x20>;
@@ -137,11 +171,26 @@
 		};
 
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 
 			pinctrl: pinctrl {
-				 /* specify compatible in each SoC DTSI */
+				/* specify compatible in each SoC DTSI */
+			};
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				#reset-cells = <1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index ec94b7a..110031b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ * Device Tree Source for UniPhier LD4 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-ld4.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD4 Reference Board";
-	compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+	model = "UniPhier LD4 Reference Board";
+	compatible = "socionext,uniphier-ld4-ref", "socionext,uniphier-ld4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index debad7f..95f342c 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD4 SoC
+ * Device Tree Source for UniPhier LD4 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-ld4";
+	compatible = "socionext,uniphier-ld4";
 
 	cpus {
 		#address-cells = <1>;
@@ -55,6 +56,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -65,18 +67,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <36864000>;
-		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 };
 
@@ -101,7 +91,7 @@
 		interrupts = <0 41 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -114,7 +104,7 @@
 		interrupts = <0 42 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -127,7 +117,7 @@
 		interrupts = <0 43 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <400000>;
 	};
 
@@ -140,7 +130,7 @@
 		interrupts = <0 44 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -151,6 +141,8 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
 	};
 
 	usb1: usb@5a810100 {
@@ -160,6 +152,8 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
 	};
 
 	usb2: usb@5a820100 {
@@ -169,6 +163,8 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+		resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
 	};
 
 };
@@ -181,6 +177,31 @@
 	interrupts = <0 29 4>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-ld4-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-ld4-mio-reset";
+	resets = <&sys_rst 7>;
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-ld4-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-ld4-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-ld4-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-ld4-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-ld4-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index b8134c6..c05d631 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD6b Reference Board
+ * Device Tree Source for UniPhier LD6b Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld6b.dtsi"
+/include/ "uniphier-ld6b.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD6b Reference Board";
-	compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b";
+	model = "UniPhier LD6b Reference Board";
+	compatible = "socionext,uniphier-ld6b-ref", "socionext,uniphier-ld6b";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ld6b.dtsi
index 19c107c..905c77d 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld6b.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD6b SoC
+ * Device Tree Source for UniPhier LD6b SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,14 +44,14 @@
  */
 
 /*
- * PH1-LD6b consists of two silicon dies: D-chip and A-chip.
- * The D-chip (digital chip) is the same as the ProXstream2 die.
- * Reuse the ProXstream2 device tree with some properties overridden.
+ * LD6b consists of two silicon dies: D-chip and A-chip.
+ * The D-chip (digital chip) is the same as the PXs2 die.
+ * Reuse the PXs2 device tree with some properties overridden.
  */
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	compatible = "socionext,ph1-ld6b";
+	compatible = "socionext,uniphier-ld6b";
 };
 
 /* UART3 unavailable: the pads are not wired to the package balls */
@@ -59,7 +60,7 @@
 };
 
 /*
- * PH1-LD6b and ProXstream2 have completely different packages,
+ * LD6b and PXs2 have completely different packages,
  * which makes the pinctrl driver unshareable.
  */
 &pinctrl {
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index d343586..0ab0a40 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ * Device Tree Source for UniPhier Pro4 Ace Board
  *
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Ace Board";
-	compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Ace Board";
+	compatible = "socionext,uniphier-pro4-ace", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 95f631a..9e92e60 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ * Device Tree Source for UniPhier Pro4 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Reference Board";
-	compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Reference Board";
+	compatible = "socionext,uniphier-pro4-ref", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index 7c3a1fc..dc4ea88 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ * Device Tree Source for UniPhier Pro4 Sanji Board
  *
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-pro4.dtsi"
 
 / {
-	model = "UniPhier PH1-Pro4 Sanji Board";
-	compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+	model = "UniPhier Pro4 Sanji Board";
+	compatible = "socionext,uniphier-pro4-sanji", "socionext,uniphier-pro4";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 7b9da08..ba70026 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro4 SoC
+ * Device Tree Source for UniPhier Pro4 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-pro4";
+	compatible = "socionext,uniphier-pro4";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,6 +64,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -73,18 +75,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <73728000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 };
 
@@ -109,7 +99,7 @@
 		interrupts = <0 41 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -122,7 +112,7 @@
 		interrupts = <0 42 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -135,7 +125,7 @@
 		interrupts = <0 43 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <100000>;
 	};
 
@@ -148,7 +138,7 @@
 		interrupts = <0 44 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -161,7 +151,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 25 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 9>;
 		clock-frequency = <400000>;
 	};
 
@@ -172,7 +162,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 26 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 10>;
 		clock-frequency = <400000>;
 	};
 
@@ -183,6 +173,8 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
 	};
 
 	usb3: usb@5a810100 {
@@ -192,6 +184,8 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb3>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
 	};
 };
 
@@ -199,6 +193,31 @@
 	clock-frequency = <25000000>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-pro4-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-pro4-mio-reset";
+	resets = <&sys_rst 7>;
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-pro4-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-pro4-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-pro4-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-pro4-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-pro4-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 7e4aa2f..2c49c36 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-Pro5 SoC
+ * Device Tree Source for UniPhier Pro5 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-pro5";
+	compatible = "socionext,uniphier-pro5";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,6 +64,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -73,18 +75,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <73728000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 };
 
@@ -121,7 +111,7 @@
 		interrupts = <0 41 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -134,7 +124,7 @@
 		interrupts = <0 42 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -147,7 +137,7 @@
 		interrupts = <0 43 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <100000>;
 	};
 
@@ -160,7 +150,7 @@
 		interrupts = <0 44 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -173,7 +163,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 25 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 9>;
 		clock-frequency = <400000>;
 	};
 
@@ -184,7 +174,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 26 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 10>;
 		clock-frequency = <400000>;
 	};
 };
@@ -193,6 +183,30 @@
 	clock-frequency = <20000000>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-pro5-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-pro5-mio-reset";
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-pro5-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-pro5-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-pro5-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-pro5-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-pro5-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 98d895b..373818a 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ * Device Tree Source for UniPhier PXs2 Gentil Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,12 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Gentil Board";
-	compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+	model = "UniPhier PXs2 Gentil Board";
+	compatible = "socionext,uniphier-pxs2-gentil",
+		     "socionext,uniphier-pxs2";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index 1fb8bd7..51a3eac 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ * Device Tree Source for UniPhier PXs2 Vodka Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,11 +44,11 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-proxstream2.dtsi"
+/include/ "uniphier-pxs2.dtsi"
 
 / {
-	model = "UniPhier ProXstream2 Vodka Board";
-	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+	model = "UniPhier PXs2 Vodka Board";
+	compatible = "socionext,uniphier-pxs2-vodka", "socionext,uniphier-pxs2";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index d00d6f5..8789cd5 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier ProXstream2 SoC
+ * Device Tree Source for UniPhier PXs2 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,proxstream2";
+	compatible = "socionext,uniphier-pxs2";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,6 +64,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -70,6 +72,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -77,6 +80,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -87,18 +91,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <88900000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 };
 
@@ -123,7 +115,7 @@
 		interrupts = <0 41 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -136,7 +128,7 @@
 		interrupts = <0 42 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -149,7 +141,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
 		interrupts = <0 43 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <100000>;
 	};
 
@@ -162,7 +154,7 @@
 		interrupts = <0 44 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -173,7 +165,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 45 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 8>;
 		clock-frequency = <400000>;
 	};
 
@@ -184,7 +176,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 25 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 9>;
 		clock-frequency = <400000>;
 	};
 
@@ -195,7 +187,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		interrupts = <0 26 4>;
-		clocks = <&i2c_clk>;
+		clocks = <&peri_clk 10>;
 		clock-frequency = <400000>;
 	};
 };
@@ -204,6 +196,30 @@
 	clock-frequency = <25000000>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-pxs2-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-pxs2-mio-reset";
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-pxs2-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-pxs2-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-pxs2-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-pxs2-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-pxs2-reset";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-sld3-ref.dts
index acb4204..ac792ae0 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld3-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ * Device Tree Source for UniPhier sLD3 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-sld3.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD3 Reference Board";
-	compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+	model = "UniPhier sLD3 Reference Board";
+	compatible = "socionext,uniphier-sld3-ref", "socionext,uniphier-sld3";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-sld3.dtsi
index 03292f4..5fa96c9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld3.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD3 SoC
+ * Device Tree Source for UniPhier sLD3 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,17 +46,17 @@
 /include/ "skeleton.dtsi"
 
 / {
-	compatible = "socionext,ph1-sld3";
+	compatible = "socionext,uniphier-sld3";
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "socionext,uniphier-smp";
 
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 
@@ -63,10 +64,16 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			#clock-cells = <0>;
@@ -79,18 +86,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <36864000>;
-		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 
 	soc {
@@ -139,7 +134,7 @@
 			status = "disabled";
 			reg = <0x54006800 0x40>;
 			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
+			clocks = <&sys_clk 0>;
 			fifo-size = <64>;
 		};
 
@@ -148,7 +143,7 @@
 			status = "disabled";
 			reg = <0x54006900 0x40>;
 			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
+			clocks = <&sys_clk 0>;
 			fifo-size = <64>;
 		};
 
@@ -157,7 +152,7 @@
 			status = "disabled";
 			reg = <0x54006a00 0x40>;
 			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
+			clocks = <&sys_clk 0>;
 			fifo-size = <64>;
 		};
 
@@ -168,7 +163,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 41 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -179,7 +174,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 42 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -190,7 +185,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -201,7 +196,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 44 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -212,7 +207,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 45 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <400000>;
 		};
 
@@ -229,6 +224,22 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld3-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld3-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -256,5 +267,21 @@
 			reg = <0x5a830100 0x100>;
 			interrupts = <0 83 4>;
 		};
+
+		sysctrl@f1840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0xf1840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld3-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index d594f40..a8291f9 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ * Device Tree Source for UniPhier sLD8 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-sld8.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-sLD8 Reference Board";
-	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+	model = "UniPhier sLD8 Reference Board";
+	compatible = "socionext,uniphier-sld8-ref", "socionext,uniphier-sld8";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 467f9d8..d8cf0e7 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-sLD8 SoC
+ * Device Tree Source for UniPhier sLD8 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /include/ "uniphier-common32.dtsi"
 
 / {
-	compatible = "socionext,ph1-sld8";
+	compatible = "socionext,uniphier-sld8";
 
 	cpus {
 		#address-cells = <1>;
@@ -55,6 +56,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
 	};
@@ -65,18 +67,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 };
 
@@ -101,7 +91,7 @@
 		interrupts = <0 41 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 4>;
 		clock-frequency = <100000>;
 	};
 
@@ -114,7 +104,7 @@
 		interrupts = <0 42 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 5>;
 		clock-frequency = <100000>;
 	};
 
@@ -127,7 +117,7 @@
 		interrupts = <0 43 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 6>;
 		clock-frequency = <400000>;
 	};
 
@@ -140,7 +130,7 @@
 		interrupts = <0 44 1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&iobus_clk>;
+		clocks = <&peri_clk 7>;
 		clock-frequency = <100000>;
 	};
 
@@ -151,6 +141,8 @@
 		interrupts = <0 80 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb0>;
+		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+		resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
 	};
 
 	usb1: usb@5a810100 {
@@ -160,6 +152,8 @@
 		interrupts = <0 81 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+		resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
 	};
 
 	usb2: usb@5a820100 {
@@ -169,6 +163,8 @@
 		interrupts = <0 82 4>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_usb2>;
+		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+		resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
 	};
 };
 
@@ -180,6 +176,31 @@
 	interrupts = <0 29 4>;
 };
 
+&mio_clk {
+	compatible = "socionext,uniphier-sld8-mio-clock";
+};
+
+&mio_rst {
+	compatible = "socionext,uniphier-sld8-mio-reset";
+	resets = <&sys_rst 7>;
+};
+
+&peri_clk {
+	compatible = "socionext,uniphier-sld8-peri-clock";
+};
+
+&peri_rst {
+	compatible = "socionext,uniphier-sld8-peri-reset";
+};
+
 &pinctrl {
 	compatible = "socionext,uniphier-sld8-pinctrl";
 };
+
+&sys_clk {
+	compatible = "socionext,uniphier-sld8-clock";
+};
+
+&sys_rst {
+	compatible = "socionext,uniphier-sld8-reset";
+};
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index a8a8e43..1e0b823 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -53,6 +53,12 @@
 	panel: panel {
 		compatible = "edt,et057090dhu";
 		backlight = <&bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
 	};
 
 	reg_3v3: regulator-3v3 {
@@ -91,8 +97,13 @@
 &dcu0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_dcu0_1>;
-	fsl,panel = <&panel>;
 	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
 };
 
 &dspi1 {
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi
index 9ffe2eb..9f2c731 100644
--- a/arch/arm/boot/dts/vf610m4.dtsi
+++ b/arch/arm/boot/dts/vf610m4.dtsi
@@ -42,6 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
 #include "vfxxx.dtsi"
 
diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c
index 3f47f12..6053f64 100644
--- a/arch/arm/common/bL_switcher_dummy_if.c
+++ b/arch/arm/common/bL_switcher_dummy_if.c
@@ -56,16 +56,4 @@ static struct miscdevice bL_switcher_device = {
 	"b.L_switcher",
 	&bL_switcher_fops
 };
-
-static int __init bL_switcher_dummy_if_init(void)
-{
-	return misc_register(&bL_switcher_device);
-}
-
-static void __exit bL_switcher_dummy_if_exit(void)
-{
-	misc_deregister(&bL_switcher_device);
-}
-
-module_init(bL_switcher_dummy_if_init);
-module_exit(bL_switcher_dummy_if_exit);
+module_misc_device(bL_switcher_device);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 0e97b4b..6c7b06854 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = {
 
 static void locomo_handler(struct irq_desc *desc)
 {
-	struct locomo *lchip = irq_desc_get_chip_data(desc);
+	struct locomo *lchip = irq_desc_get_handler_data(desc);
 	int req, i;
 
 	/* Acknowledge the parent IRQ */
@@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
 	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-	irq_set_chip_data(lchip->irq, lchip);
-	irq_set_chained_handler(lchip->irq, locomo_handler);
+	irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
 
 	/* Install handlers for IRQ_LOCOMO_* */
 	for ( ; irq <= lchip->irq_base + 3; irq++) {
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index fb0a0a4..4ecd512 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -15,6 +15,7 @@
  * from machine specific code with proper arguments when required.
  */
 #include <linux/module.h>
+#include <linux/gpio/driver.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
@@ -107,6 +108,7 @@ struct sa1111 {
 	spinlock_t	lock;
 	void __iomem	*base;
 	struct sa1111_platform_data *pdata;
+	struct gpio_chip gc;
 #ifdef CONFIG_PM
 	void		*saved_state;
 #endif
@@ -231,132 +233,44 @@ static void sa1111_irq_handler(struct irq_desc *desc)
 #define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
 #define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
 
-static void sa1111_ack_irq(struct irq_data *d)
-{
-}
-
-static void sa1111_mask_lowirq(struct irq_data *d)
+static u32 sa1111_irqmask(struct irq_data *d)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie0;
 
-	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
-	ie0 &= ~SA1111_IRQMASK_LO(d->irq);
-	writel(ie0, mapbase + SA1111_INTEN0);
+	return BIT((d->irq - sachip->irq_base) & 31);
 }
 
-static void sa1111_unmask_lowirq(struct irq_data *d)
+static int sa1111_irqbank(struct irq_data *d)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie0;
 
-	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
-	ie0 |= SA1111_IRQMASK_LO(d->irq);
-	sa1111_writel(ie0, mapbase + SA1111_INTEN0);
+	return ((d->irq - sachip->irq_base) / 32) * 4;
 }
 
-/*
- * Attempt to re-trigger the interrupt.  The SA1111 contains a register
- * (INTSET) which claims to do this.  However, in practice no amount of
- * manipulation of INTEN and INTSET guarantees that the interrupt will
- * be triggered.  In fact, its very difficult, if not impossible to get
- * INTSET to re-trigger the interrupt.
- */
-static int sa1111_retrigger_lowirq(struct irq_data *d)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
-	unsigned long ip0;
-	int i;
-
-	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	for (i = 0; i < 8; i++) {
-		sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0);
-		sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
-		if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
-			break;
-	}
-
-	if (i == 8)
-		pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
-		       d->irq);
-	return i == 8 ? -1 : 0;
-}
-
-static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags)
-{
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
-	unsigned long ip0;
-
-	if (flags == IRQ_TYPE_PROBE)
-		return 0;
-
-	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
-		return -EINVAL;
-
-	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & IRQ_TYPE_EDGE_RISING)
-		ip0 &= ~mask;
-	else
-		ip0 |= mask;
-	sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
-	sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0);
-
-	return 0;
-}
-
-static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on)
+static void sa1111_ack_irq(struct irq_data *d)
 {
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
-	unsigned long we0;
-
-	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
-	if (on)
-		we0 |= mask;
-	else
-		we0 &= ~mask;
-	sa1111_writel(we0, mapbase + SA1111_WAKEEN0);
-
-	return 0;
 }
 
-static struct irq_chip sa1111_low_chip = {
-	.name		= "SA1111-l",
-	.irq_ack	= sa1111_ack_irq,
-	.irq_mask	= sa1111_mask_lowirq,
-	.irq_unmask	= sa1111_unmask_lowirq,
-	.irq_retrigger	= sa1111_retrigger_lowirq,
-	.irq_set_type	= sa1111_type_lowirq,
-	.irq_set_wake	= sa1111_wake_lowirq,
-};
-
-static void sa1111_mask_highirq(struct irq_data *d)
+static void sa1111_mask_irq(struct irq_data *d)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie1;
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ie;
 
-	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
-	ie1 &= ~SA1111_IRQMASK_HI(d->irq);
-	sa1111_writel(ie1, mapbase + SA1111_INTEN1);
+	ie = sa1111_readl(mapbase + SA1111_INTEN0);
+	ie &= ~sa1111_irqmask(d);
+	sa1111_writel(ie, mapbase + SA1111_INTEN0);
 }
 
-static void sa1111_unmask_highirq(struct irq_data *d)
+static void sa1111_unmask_irq(struct irq_data *d)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned long ie1;
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ie;
 
-	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
-	ie1 |= SA1111_IRQMASK_HI(d->irq);
-	sa1111_writel(ie1, mapbase + SA1111_INTEN1);
+	ie = sa1111_readl(mapbase + SA1111_INTEN0);
+	ie |= sa1111_irqmask(d);
+	sa1111_writel(ie, mapbase + SA1111_INTEN0);
 }
 
 /*
@@ -366,19 +280,18 @@ static void sa1111_unmask_highirq(struct irq_data *d)
  * be triggered.  In fact, its very difficult, if not impossible to get
  * INTSET to re-trigger the interrupt.
  */
-static int sa1111_retrigger_highirq(struct irq_data *d)
+static int sa1111_retrigger_irq(struct irq_data *d)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
-	unsigned long ip1;
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ip, mask = sa1111_irqmask(d);
 	int i;
 
-	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
+	ip = sa1111_readl(mapbase + SA1111_INTPOL0);
 	for (i = 0; i < 8; i++) {
-		sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1);
-		sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
-		if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask)
+		sa1111_writel(ip ^ mask, mapbase + SA1111_INTPOL0);
+		sa1111_writel(ip, mapbase + SA1111_INTPOL0);
+		if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
 			break;
 	}
 
@@ -388,12 +301,11 @@ static int sa1111_retrigger_highirq(struct irq_data *d)
 	return i == 8 ? -1 : 0;
 }
 
-static int sa1111_type_highirq(struct irq_data *d, unsigned int flags)
+static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
-	unsigned long ip1;
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ip, mask = sa1111_irqmask(d);
 
 	if (flags == IRQ_TYPE_PROBE)
 		return 0;
@@ -401,42 +313,41 @@ static int sa1111_type_highirq(struct irq_data *d, unsigned int flags)
 	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
-	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
+	ip = sa1111_readl(mapbase + SA1111_INTPOL0);
 	if (flags & IRQ_TYPE_EDGE_RISING)
-		ip1 &= ~mask;
+		ip &= ~mask;
 	else
-		ip1 |= mask;
-	sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
-	sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1);
+		ip |= mask;
+	sa1111_writel(ip, mapbase + SA1111_INTPOL0);
+	sa1111_writel(ip, mapbase + SA1111_WAKEPOL0);
 
 	return 0;
 }
 
-static int sa1111_wake_highirq(struct irq_data *d, unsigned int on)
+static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
 {
 	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-	void __iomem *mapbase = sachip->base + SA1111_INTC;
-	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
-	unsigned long we1;
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 we, mask = sa1111_irqmask(d);
 
-	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
+	we = sa1111_readl(mapbase + SA1111_WAKEEN0);
 	if (on)
-		we1 |= mask;
+		we |= mask;
 	else
-		we1 &= ~mask;
-	sa1111_writel(we1, mapbase + SA1111_WAKEEN1);
+		we &= ~mask;
+	sa1111_writel(we, mapbase + SA1111_WAKEEN0);
 
 	return 0;
 }
 
-static struct irq_chip sa1111_high_chip = {
-	.name		= "SA1111-h",
+static struct irq_chip sa1111_irq_chip = {
+	.name		= "SA1111",
 	.irq_ack	= sa1111_ack_irq,
-	.irq_mask	= sa1111_mask_highirq,
-	.irq_unmask	= sa1111_unmask_highirq,
-	.irq_retrigger	= sa1111_retrigger_highirq,
-	.irq_set_type	= sa1111_type_highirq,
-	.irq_set_wake	= sa1111_wake_highirq,
+	.irq_mask	= sa1111_mask_irq,
+	.irq_unmask	= sa1111_unmask_irq,
+	.irq_retrigger	= sa1111_retrigger_irq,
+	.irq_set_type	= sa1111_type_irq,
+	.irq_set_wake	= sa1111_wake_irq,
 };
 
 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
@@ -472,8 +383,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 	 */
 	sa1111_writel(0, irqbase + SA1111_INTPOL0);
-	sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
-		      SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
+	sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) |
+		      BIT(IRQ_S1_READY_NINT & 31),
 		      irqbase + SA1111_INTPOL1);
 
 	/* clear all IRQs */
@@ -482,16 +393,14 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 
 	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
 		irq = sachip->irq_base + i;
-		irq_set_chip_and_handler(irq, &sa1111_low_chip,
-					 handle_edge_irq);
+		irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
 		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
 		irq = sachip->irq_base + i;
-		irq_set_chip_and_handler(irq, &sa1111_high_chip,
-					 handle_edge_irq);
+		irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
 		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
@@ -509,6 +418,181 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	return 0;
 }
 
+static void sa1111_remove_irq(struct sa1111 *sachip)
+{
+	void __iomem *irqbase = sachip->base + SA1111_INTC;
+
+	/* disable all IRQs */
+	sa1111_writel(0, irqbase + SA1111_INTEN0);
+	sa1111_writel(0, irqbase + SA1111_INTEN1);
+	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
+	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+
+	if (sachip->irq != NO_IRQ) {
+		irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
+
+		release_mem_region(sachip->phys + SA1111_INTC, 512);
+	}
+}
+
+enum {
+	SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
+};
+
+static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
+{
+	return container_of(gc, struct sa1111, gc);
+}
+
+static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
+{
+	void __iomem *reg = sachip->base + SA1111_GPIO;
+
+	if (offset < 4)
+		return reg + SA1111_GPIO_PADDR;
+	if (offset < 10)
+		return reg + SA1111_GPIO_PBDDR;
+	if (offset < 18)
+		return reg + SA1111_GPIO_PCDDR;
+	return NULL;
+}
+
+static u32 sa1111_gpio_map_bit(unsigned offset)
+{
+	if (offset < 4)
+		return BIT(offset);
+	if (offset < 10)
+		return BIT(offset - 4);
+	if (offset < 18)
+		return BIT(offset - 10);
+	return 0;
+}
+
+static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
+{
+	u32 val;
+
+	val = readl_relaxed(reg);
+	val &= ~mask;
+	val |= mask & set;
+	writel_relaxed(val, reg);
+}
+
+static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
+}
+
+static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
+}
+
+static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+	int value)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
+}
+
+static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
+}
+
+static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+
+static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sachip->base + SA1111_GPIO;
+	u32 msk, val;
+
+	msk = *mask;
+	val = *bits;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+
+static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+
+	return sachip->irq_base + offset;
+}
+
+static int sa1111_setup_gpios(struct sa1111 *sachip)
+{
+	sachip->gc.label = "sa1111";
+	sachip->gc.parent = sachip->dev;
+	sachip->gc.owner = THIS_MODULE;
+	sachip->gc.get_direction = sa1111_gpio_get_direction;
+	sachip->gc.direction_input = sa1111_gpio_direction_input;
+	sachip->gc.direction_output = sa1111_gpio_direction_output;
+	sachip->gc.get = sa1111_gpio_get;
+	sachip->gc.set = sa1111_gpio_set;
+	sachip->gc.set_multiple = sa1111_gpio_set_multiple;
+	sachip->gc.to_irq = sa1111_gpio_to_irq;
+	sachip->gc.base = -1;
+	sachip->gc.ngpio = 18;
+
+	return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
+}
+
 /*
  * Bring the SA1111 out of reset.  This requires a set procedure:
  *  1. nRESET asserted (by hardware)
@@ -607,7 +691,7 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 
 static void sa1111_dev_release(struct device *_dev)
 {
-	struct sa1111_dev *dev = SA1111_DEV(_dev);
+	struct sa1111_dev *dev = to_sa1111_device(_dev);
 
 	kfree(dev);
 }
@@ -696,19 +780,17 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (!pd)
 		return -EINVAL;
 
-	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
+	sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
 	if (!sachip)
 		return -ENOMEM;
 
-	sachip->clk = clk_get(me, "SA1111_CLK");
-	if (IS_ERR(sachip->clk)) {
-		ret = PTR_ERR(sachip->clk);
-		goto err_free;
-	}
+	sachip->clk = devm_clk_get(me, "SA1111_CLK");
+	if (IS_ERR(sachip->clk))
+		return PTR_ERR(sachip->clk);
 
 	ret = clk_prepare(sachip->clk);
 	if (ret)
-		goto err_clkput;
+		return ret;
 
 	spin_lock_init(&sachip->lock);
 
@@ -754,9 +836,14 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (sachip->irq != NO_IRQ) {
 		ret = sa1111_setup_irq(sachip, pd->irq_base);
 		if (ret)
-			goto err_unmap;
+			goto err_clk;
 	}
 
+	/* Setup the GPIOs - should really be done after the IRQ setup */
+	ret = sa1111_setup_gpios(sachip);
+	if (ret)
+		goto err_irq;
+
 #ifdef CONFIG_ARCH_SA1100
 	{
 	unsigned int val;
@@ -799,20 +886,22 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 	return 0;
 
+ err_irq:
+	sa1111_remove_irq(sachip);
+ err_clk:
+	clk_disable(sachip->clk);
  err_unmap:
 	iounmap(sachip->base);
  err_clk_unprep:
 	clk_unprepare(sachip->clk);
- err_clkput:
-	clk_put(sachip->clk);
- err_free:
-	kfree(sachip);
 	return ret;
 }
 
 static int sa1111_remove_one(struct device *dev, void *data)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
+	if (dev->bus != &sa1111_bus_type)
+		return 0;
 	device_del(&sadev->dev);
 	release_resource(&sadev->res);
 	put_device(&sadev->dev);
@@ -821,29 +910,14 @@ static int sa1111_remove_one(struct device *dev, void *data)
 
 static void __sa1111_remove(struct sa1111 *sachip)
 {
-	void __iomem *irqbase = sachip->base + SA1111_INTC;
-
 	device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
 
-	/* disable all IRQs */
-	sa1111_writel(0, irqbase + SA1111_INTEN0);
-	sa1111_writel(0, irqbase + SA1111_INTEN1);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+	sa1111_remove_irq(sachip);
 
 	clk_disable(sachip->clk);
 	clk_unprepare(sachip->clk);
 
-	if (sachip->irq != NO_IRQ) {
-		irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
-		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
-
-		release_mem_region(sachip->phys + SA1111_INTC, 512);
-	}
-
 	iounmap(sachip->base);
-	clk_put(sachip->clk);
-	kfree(sachip);
 }
 
 struct sa1111_save_data {
@@ -869,9 +943,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -934,9 +1008,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -952,7 +1026,7 @@ static int sa1111_resume(struct platform_device *dev)
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1003,8 +1077,8 @@ static int sa1111_resume(struct platform_device *dev)
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1017,7 +1091,7 @@ static int sa1111_probe(struct platform_device *pdev)
 		return -EINVAL;
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
-		return -ENXIO;
+		return irq;
 
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
@@ -1038,6 +1112,11 @@ static int sa1111_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1050,10 +1129,9 @@ static int sa1111_remove(struct platform_device *pdev)
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 
@@ -1279,6 +1357,14 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 }
 EXPORT_SYMBOL(sa1111_disable_device);
 
+int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
+{
+	if (num >= ARRAY_SIZE(sadev->irq))
+		return -EINVAL;
+	return sadev->irq[num];
+}
+EXPORT_SYMBOL_GPL(sa1111_get_irq);
+
 /*
  *	SA1111 "Register Access Bus."
  *
@@ -1287,7 +1373,7 @@ EXPORT_SYMBOL(sa1111_disable_device);
  */
 static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 {
-	struct sa1111_dev *dev = SA1111_DEV(_dev);
+	struct sa1111_dev *dev = to_sa1111_device(_dev);
 	struct sa1111_driver *drv = SA1111_DRV(_drv);
 
 	return !!(dev->devid & drv->devid);
@@ -1295,7 +1381,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 
 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
 	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
 	int ret = 0;
 
@@ -1306,7 +1392,7 @@ static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
 
 static int sa1111_bus_resume(struct device *dev)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
 	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
 	int ret = 0;
 
@@ -1320,12 +1406,12 @@ static void sa1111_bus_shutdown(struct device *dev)
 	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
 
 	if (drv && drv->shutdown)
-		drv->shutdown(SA1111_DEV(dev));
+		drv->shutdown(to_sa1111_device(dev));
 }
 
 static int sa1111_bus_probe(struct device *dev)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
 	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
 	int ret = -ENODEV;
 
@@ -1336,7 +1422,7 @@ static int sa1111_bus_probe(struct device *dev)
 
 static int sa1111_bus_remove(struct device *dev)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
 	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
 	int ret = 0;
 
@@ -1401,7 +1487,7 @@ static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
 static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
 	void *data)
 {
-	struct sa1111_dev *dev = SA1111_DEV(data);
+	struct sa1111_dev *dev = to_sa1111_device(data);
 
 	switch (action) {
 	case BUS_NOTIFY_ADD_DEVICE:
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 0b9211b..3146ad0 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -83,7 +83,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=y
 CONFIG_NET_ETHERNET=y
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index f33d042..5e5dd6b 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,8 +1,8 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -14,16 +14,16 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_DAVINCI=y
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
-CONFIG_ARCH_DAVINCI_DM365=y
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_MACH_DA8XX_DT=y
+CONFIG_ARCH_DAVINCI_DM365=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DM355_LEOPARD=y
@@ -32,13 +32,8 @@ CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_USE_OF=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -50,22 +45,18 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_IDLE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_CFI=m
 CONFIG_MTD_CFI_INTELEXT=m
@@ -75,7 +66,8 @@ CONFIG_MTD_M25P80=m
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_DAVINCI=m
 CONFIG_MTD_SPI_NOR=m
-CONFIG_PROC_DEVICETREE=y
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -86,25 +78,23 @@ CONFIG_BLK_DEV_PALMCHIP_BK3710=m
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_NETDEVICES=y
+CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
+CONFIG_DM9000=y
+CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_LXT_PHY=y
+CONFIG_SMSC_PHY=y
 CONFIG_LSI_ET1011C_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 CONFIG_PPP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_NETCONSOLE=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
 CONFIG_KEYBOARD_ATKBD=m
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
@@ -115,8 +105,9 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_HW_RANDOM is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
 CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
@@ -124,26 +115,25 @@ CONFIG_SPI=y
 CONFIG_SPI_DAVINCI=m
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_WATCHDOG=y
 CONFIG_DAVINCI_WATCHDOG=m
 CONFIG_MFD_DM355EVM_MSP=y
 CONFIG_TPS6507X=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
-CONFIG_FB_DA8XX=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_FB_DA8XX=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_SND=m
 CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_EVM=m
-CONFIG_SND_DM6467_SOC_EVM=m
+CONFIG_SND_EDMA_SOC=m
+CONFIG_SND_DA850_SOC_EVM=m
+CONFIG_SND_SIMPLE_CARD=m
 CONFIG_HID=m
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
@@ -163,10 +153,9 @@ CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
 CONFIG_USB=m
 CONFIG_USB_MON=m
+CONFIG_USB_STORAGE=m
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_STORAGE=m
 CONFIG_USB_TEST=m
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG_FILES=y
@@ -188,8 +177,11 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=m
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
+CONFIG_MEMORY=y
+CONFIG_TI_AEMIF=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
@@ -198,30 +190,22 @@ CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=m
+CONFIG_UBIFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=m
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=m
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_T10DIF=m
-CONFIG_GPIO_PCA953X=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 01986de..c58f684 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -17,6 +17,7 @@ CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CMA=y
+CONFIG_SECCOMP=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
@@ -28,13 +29,15 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -165,8 +168,6 @@ CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
 CONFIG_DRM_NXP_PTN3460=y
 CONFIG_DRM_PARADE_PS8622=y
-CONFIG_EXYNOS_VIDEO=y
-CONFIG_EXYNOS_MIPI_DSI=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_PWM=y
@@ -219,6 +220,12 @@ CONFIG_CROS_EC_CHARDEV=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=y
 CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_PM_DEVFREQ=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_ARM_EXYNOS_BUS_DEVFREQ=y
+CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_MAX14577=y
 CONFIG_EXTCON_MAX77693=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 9083399..5f013c9f 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -22,14 +22,13 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_SOC_IMX25=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 3219480..8ec4dbb 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -1,6 +1,5 @@
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -72,7 +71,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
@@ -228,7 +226,6 @@ CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_MX3=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_CODA=y
 CONFIG_SOC_CAMERA_OV2640=y
@@ -241,6 +238,7 @@ CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_HDMI=y
+CONFIG_DRM_ETNAVIV=y
 CONFIG_FB_MXS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
@@ -264,6 +262,7 @@ CONFIG_SND_SOC_IMX_MC13783=y
 CONFIG_SND_SOC_FSL_ASOC_CARD=y
 CONFIG_SND_SOC_CS42XX8_I2C=y
 CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_WM8960=y
 CONFIG_SND_SIMPLE_CARD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
@@ -276,6 +275,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_TEST=m
 CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
@@ -293,7 +293,14 @@ CONFIG_USB_CONFIGFS_EEM=y
 CONFIG_USB_CONFIGFS_MASS_STORAGE=y
 CONFIG_USB_CONFIGFS_F_LB_SS=y
 CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_F_UVC=y
+CONFIG_USB_CONFIGFS_F_PRINTER=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
 CONFIG_USB_G_NCM=m
 CONFIG_USB_GADGETFS=m
@@ -329,13 +336,12 @@ CONFIG_FSL_EDMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
 CONFIG_STAGING=y
-# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_VF610_ADC=y
+CONFIG_MPL3115=y
 CONFIG_PWM=y
 CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
-CONFIG_NVMEM=y
 CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -355,7 +361,6 @@ CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 71f1467..869faae 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -13,15 +13,8 @@ CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_INTEGRATOR=y
 CONFIG_ARCH_INTEGRATOR_AP=y
-CONFIG_ARCH_INTEGRATOR_CP=y
 CONFIG_INTEGRATOR_IMPD1=y
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_ARM1020=y
-CONFIG_CPU_ARM1022=y
-CONFIG_CPU_ARM1026=y
+CONFIG_ARCH_INTEGRATOR_CP=y
 CONFIG_PCI=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -33,7 +26,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -51,7 +43,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -71,6 +63,7 @@ CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 71b42e6..78cd2f1 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -161,6 +161,7 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index 1c8c9ee..a9dd1e9 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -31,7 +31,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_CFI_I1 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_BLK_DEV_NBD=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 433eebb..9a6390c 100644
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -20,9 +20,7 @@ CONFIG_INTEGRATOR_CM720T=y
 CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MACH_IMX1_DT=y
+CONFIG_SOC_IMX1=y
 CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y
 # CONFIG_ATAGS is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2c8665c..437d074 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -126,16 +126,19 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=16
 CONFIG_HIGHPTE=y
 CONFIG_CMA=y
+CONFIG_SECCOMP=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_KEXEC=y
+CONFIG_EFI=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_ARM_IMX6Q_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
@@ -220,6 +223,7 @@ CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_BRCM=y
 CONFIG_AHCI_ST=y
+CONFIG_AHCI_IMX=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
 CONFIG_SATA_HIGHBANK=y
@@ -277,7 +281,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=y
 CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_MMS114=m
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
@@ -499,6 +503,7 @@ CONFIG_MFD_TPS65910=y
 CONFIG_REGULATOR_ACT8945A=y
 CONFIG_REGULATOR_AB8500=y
 CONFIG_REGULATOR_ACT8865=y
+CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_AXP20X=m
@@ -593,6 +598,7 @@ CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_STI=m
 CONFIG_DRM_VC4=y
 CONFIG_FB_ARMCLCD=y
+CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SIMPLE=y
@@ -750,6 +756,7 @@ CONFIG_RTC_DRV_S35390A=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_EM3027=y
 CONFIG_RTC_DRV_DA9063=m
+CONFIG_RTC_DRV_EFI=m
 CONFIG_RTC_DRV_DIGICOLOR=m
 CONFIG_RTC_DRV_S5M=m
 CONFIG_RTC_DRV_S3C=m
@@ -781,7 +788,7 @@ CONFIG_MXS_DMA=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
 CONFIG_QCOM_BAM_DMA=y
-CONFIG_XILINX_VDMA=y
+CONFIG_XILINX_DMA=y
 CONFIG_DMA_SUN6I=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
@@ -867,6 +874,8 @@ CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_EFI_VARS=m
+CONFIG_EFI_CAPSULE_LOADER=m
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 6051c51..f7f6039 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -91,10 +91,7 @@ CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123=y
-CONFIG_NET_DSA_MV88E6171=y
-CONFIG_NET_DSA_MV88E6352=y
+CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 486a4ca..f1a0e25 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -48,6 +48,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
@@ -59,6 +60,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_SRAM=y
+CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
@@ -140,6 +142,7 @@ CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 487c6c3..53e1a88 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -139,7 +139,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_TSL2550=m
-CONFIG_BMP085_I2C=m
 CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_I2C=m
@@ -428,6 +427,7 @@ CONFIG_EXTCON_USB_GPIO=m
 CONFIG_TI_EMIF=m
 CONFIG_IIO=m
 CONFIG_TI_AM335X_ADC=m
+CONFIG_BMP280=m
 CONFIG_PWM=y
 CONFIG_PWM_OMAP_DMTIMER=m
 CONFIG_PWM_TIECAP=m
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 917a070b..088627a 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -28,7 +28,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
 # CONFIG_MTD_CFI_I1 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index dc5517e..a016ecc 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -26,8 +26,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_LDM_PARTITION=y
 CONFIG_CMDLINE_PARTITION=y
 CONFIG_ARCH_PXA=y
-CONFIG_MACH_PXA27X_DT=y
-CONFIG_MACH_PXA3XX_DT=y
 CONFIG_ARCH_LUBBOCK=y
 CONFIG_MACH_MAINSTONE=y
 CONFIG_MACH_ZYLONITE300=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index b3ade55..bc4bfe0 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -76,7 +76,6 @@ CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 0ada29d..492f7f3 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -94,8 +94,6 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index da3c042..aef022a 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -284,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];
diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c
index 1568cb5..7546b3c 100644
--- a/arch/arm/crypto/ghash-ce-glue.c
+++ b/arch/arm/crypto/ghash-ce-glue.c
@@ -138,7 +138,7 @@ static struct shash_alg ghash_alg = {
 	.setkey			= ghash_setkey,
 	.descsize		= sizeof(struct ghash_desc_ctx),
 	.base			= {
-		.cra_name	= "ghash",
+		.cra_name	= "__ghash",
 		.cra_driver_name = "__driver-ghash-ce",
 		.cra_priority	= 0,
 		.cra_flags	= CRYPTO_ALG_TYPE_SHASH | CRYPTO_ALG_INTERNAL,
@@ -220,6 +220,27 @@ static int ghash_async_digest(struct ahash_request *req)
 	}
 }
 
+static int ghash_async_import(struct ahash_request *req, const void *in)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm);
+	desc->flags = req->base.flags;
+
+	return crypto_shash_import(desc, in);
+}
+
+static int ghash_async_export(struct ahash_request *req, void *out)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	return crypto_shash_export(desc, out);
+}
+
 static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
 			      unsigned int keylen)
 {
@@ -268,7 +289,10 @@ static struct ahash_alg ghash_async_alg = {
 	.final			= ghash_async_final,
 	.setkey			= ghash_async_setkey,
 	.digest			= ghash_async_digest,
+	.import			= ghash_async_import,
+	.export			= ghash_async_export,
 	.halg.digestsize	= GHASH_DIGEST_SIZE,
+	.halg.statesize		= sizeof(struct ghash_desc_ctx),
 	.halg.base		= {
 		.cra_name	= "ghash",
 		.cra_driver_name = "ghash-ce",
diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S
index dcd01f3..2468fad 100644
--- a/arch/arm/crypto/sha1-armv7-neon.S
+++ b/arch/arm/crypto/sha1-armv7-neon.S
@@ -12,7 +12,6 @@
 #include <asm/assembler.h>
 
 .syntax unified
-.code   32
 .fpu neon
 
 .text
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index e08d151..a808829 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -22,9 +22,7 @@
 
 #include <linux/io.h>
 #include <asm/barrier.h>
-
-#define __ACCESS_CP15(CRn, Op1, CRm, Op2)	p15, Op1, %0, CRn, CRm, Op2
-#define __ACCESS_CP15_64(Op1, CRm)		p15, Op1, %Q0, %R0, CRm
+#include <asm/cp15.h>
 
 #define ICC_EOIR1			__ACCESS_CP15(c12, 0, c12, 1)
 #define ICC_DIR				__ACCESS_CP15(c12, 0, c11, 1)
@@ -34,6 +32,7 @@
 #define ICC_CTLR			__ACCESS_CP15(c12, 0, c12, 4)
 #define ICC_SRE				__ACCESS_CP15(c12, 0, c12, 5)
 #define ICC_IGRPEN1			__ACCESS_CP15(c12, 0, c12, 7)
+#define ICC_BPR1			__ACCESS_CP15(c12, 0, c12, 3)
 
 #define ICC_HSRE			__ACCESS_CP15(c12, 4, c9, 5)
 
@@ -98,65 +97,131 @@
 #define ICH_AP1R2			__AP1Rx(2)
 #define ICH_AP1R3			__AP1Rx(3)
 
+/* A32-to-A64 mappings used by VGIC save/restore */
+
+#define CPUIF_MAP(a32, a64)			\
+static inline void write_ ## a64(u32 val)	\
+{						\
+	write_sysreg(val, a32);			\
+}						\
+static inline u32 read_ ## a64(void)		\
+{						\
+	return read_sysreg(a32); 		\
+}						\
+
+#define CPUIF_MAP_LO_HI(a32lo, a32hi, a64)	\
+static inline void write_ ## a64(u64 val)	\
+{						\
+	write_sysreg(lower_32_bits(val), a32lo);\
+	write_sysreg(upper_32_bits(val), a32hi);\
+}						\
+static inline u64 read_ ## a64(void)		\
+{						\
+	u64 val = read_sysreg(a32lo);		\
+						\
+	val |=	(u64)read_sysreg(a32hi) << 32;	\
+						\
+	return val; 				\
+}
+
+CPUIF_MAP(ICH_HCR, ICH_HCR_EL2)
+CPUIF_MAP(ICH_VTR, ICH_VTR_EL2)
+CPUIF_MAP(ICH_MISR, ICH_MISR_EL2)
+CPUIF_MAP(ICH_EISR, ICH_EISR_EL2)
+CPUIF_MAP(ICH_ELSR, ICH_ELSR_EL2)
+CPUIF_MAP(ICH_VMCR, ICH_VMCR_EL2)
+CPUIF_MAP(ICH_AP0R3, ICH_AP0R3_EL2)
+CPUIF_MAP(ICH_AP0R2, ICH_AP0R2_EL2)
+CPUIF_MAP(ICH_AP0R1, ICH_AP0R1_EL2)
+CPUIF_MAP(ICH_AP0R0, ICH_AP0R0_EL2)
+CPUIF_MAP(ICH_AP1R3, ICH_AP1R3_EL2)
+CPUIF_MAP(ICH_AP1R2, ICH_AP1R2_EL2)
+CPUIF_MAP(ICH_AP1R1, ICH_AP1R1_EL2)
+CPUIF_MAP(ICH_AP1R0, ICH_AP1R0_EL2)
+CPUIF_MAP(ICC_HSRE, ICC_SRE_EL2)
+CPUIF_MAP(ICC_SRE, ICC_SRE_EL1)
+
+CPUIF_MAP_LO_HI(ICH_LR15, ICH_LRC15, ICH_LR15_EL2)
+CPUIF_MAP_LO_HI(ICH_LR14, ICH_LRC14, ICH_LR14_EL2)
+CPUIF_MAP_LO_HI(ICH_LR13, ICH_LRC13, ICH_LR13_EL2)
+CPUIF_MAP_LO_HI(ICH_LR12, ICH_LRC12, ICH_LR12_EL2)
+CPUIF_MAP_LO_HI(ICH_LR11, ICH_LRC11, ICH_LR11_EL2)
+CPUIF_MAP_LO_HI(ICH_LR10, ICH_LRC10, ICH_LR10_EL2)
+CPUIF_MAP_LO_HI(ICH_LR9, ICH_LRC9, ICH_LR9_EL2)
+CPUIF_MAP_LO_HI(ICH_LR8, ICH_LRC8, ICH_LR8_EL2)
+CPUIF_MAP_LO_HI(ICH_LR7, ICH_LRC7, ICH_LR7_EL2)
+CPUIF_MAP_LO_HI(ICH_LR6, ICH_LRC6, ICH_LR6_EL2)
+CPUIF_MAP_LO_HI(ICH_LR5, ICH_LRC5, ICH_LR5_EL2)
+CPUIF_MAP_LO_HI(ICH_LR4, ICH_LRC4, ICH_LR4_EL2)
+CPUIF_MAP_LO_HI(ICH_LR3, ICH_LRC3, ICH_LR3_EL2)
+CPUIF_MAP_LO_HI(ICH_LR2, ICH_LRC2, ICH_LR2_EL2)
+CPUIF_MAP_LO_HI(ICH_LR1, ICH_LRC1, ICH_LR1_EL2)
+CPUIF_MAP_LO_HI(ICH_LR0, ICH_LRC0, ICH_LR0_EL2)
+
+#define read_gicreg(r)                 read_##r()
+#define write_gicreg(v, r)             write_##r(v)
+
 /* Low-level accessors */
 
 static inline void gic_write_eoir(u32 irq)
 {
-	asm volatile("mcr " __stringify(ICC_EOIR1) : : "r" (irq));
+	write_sysreg(irq, ICC_EOIR1);
 	isb();
 }
 
 static inline void gic_write_dir(u32 val)
 {
-	asm volatile("mcr " __stringify(ICC_DIR) : : "r" (val));
+	write_sysreg(val, ICC_DIR);
 	isb();
 }
 
 static inline u32 gic_read_iar(void)
 {
-	u32 irqstat;
+	u32 irqstat = read_sysreg(ICC_IAR1);
 
-	asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
 	dsb(sy);
+
 	return irqstat;
 }
 
 static inline void gic_write_pmr(u32 val)
 {
-	asm volatile("mcr " __stringify(ICC_PMR) : : "r" (val));
+	write_sysreg(val, ICC_PMR);
 }
 
 static inline void gic_write_ctlr(u32 val)
 {
-	asm volatile("mcr " __stringify(ICC_CTLR) : : "r" (val));
+	write_sysreg(val, ICC_CTLR);
 	isb();
 }
 
 static inline void gic_write_grpen1(u32 val)
 {
-	asm volatile("mcr " __stringify(ICC_IGRPEN1) : : "r" (val));
+	write_sysreg(val, ICC_IGRPEN1);
 	isb();
 }
 
 static inline void gic_write_sgi1r(u64 val)
 {
-	asm volatile("mcrr " __stringify(ICC_SGI1R) : : "r" (val));
+	write_sysreg(val, ICC_SGI1R);
 }
 
 static inline u32 gic_read_sre(void)
 {
-	u32 val;
-
-	asm volatile("mrc " __stringify(ICC_SRE) : "=r" (val));
-	return val;
+	return read_sysreg(ICC_SRE);
 }
 
 static inline void gic_write_sre(u32 val)
 {
-	asm volatile("mcr " __stringify(ICC_SRE) : : "r" (val));
+	write_sysreg(val, ICC_SRE);
 	isb();
 }
 
+static inline void gic_write_bpr1(u32 val)
+{
+	write_sysreg(val, ICC_BPR1);
+}
+
 /*
  * Even in 32bit systems that use LPAE, there is no guarantee that the I/O
  * interface provides true 64bit atomic accesses, so using strd/ldrd doesn't
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 4eaea21..68b06f9 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -159,7 +159,11 @@
 	.endm
 
 	.macro	save_and_disable_irqs_notrace, oldcpsr
+#ifdef CONFIG_CPU_V7M
+	mrs	\oldcpsr, primask
+#else
 	mrs	\oldcpsr, cpsr
+#endif
 	disable_irq_notrace
 	.endm
 
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 9156fc3..bdd283b 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -501,21 +501,4 @@ static inline void set_kernel_text_ro(void) { }
 void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
 			     void *kaddr, unsigned long len);
 
-/**
- * secure_flush_area - ensure coherency across the secure boundary
- * @addr: virtual address
- * @size: size of region
- *
- * Ensure that the specified area of memory is coherent across the secure
- * boundary from the non-secure side.  This is used when calling secure
- * firmware where the secure firmware does not ensure coherency.
- */
-static inline void secure_flush_area(const void *addr, size_t size)
-{
-	phys_addr_t phys = __pa(addr);
-
-	__cpuc_flush_dcache_area((void *)addr, size);
-	outer_flush_range(phys, phys + size);
-}
-
 #endif
diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h
index 7ea7814..01509ae 100644
--- a/arch/arm/include/asm/cachetype.h
+++ b/arch/arm/include/asm/cachetype.h
@@ -56,4 +56,43 @@ static inline unsigned int __attribute__((pure)) cacheid_is(unsigned int mask)
 	       (~__CACHEID_NEVER & __CACHEID_ARCH_MIN & mask & cacheid);
 }
 
+#define CSSELR_ICACHE	1
+#define CSSELR_DCACHE	0
+
+#define CSSELR_L1	(0 << 1)
+#define CSSELR_L2	(1 << 1)
+#define CSSELR_L3	(2 << 1)
+#define CSSELR_L4	(3 << 1)
+#define CSSELR_L5	(4 << 1)
+#define CSSELR_L6	(5 << 1)
+#define CSSELR_L7	(6 << 1)
+
+#ifndef CONFIG_CPU_V7M
+static inline void set_csselr(unsigned int cache_selector)
+{
+	asm volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (cache_selector));
+}
+
+static inline unsigned int read_ccsidr(void)
+{
+	unsigned int val;
+
+	asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (val));
+	return val;
+}
+#else /* CONFIG_CPU_V7M */
+#include <linux/io.h>
+#include "asm/v7m.h"
+
+static inline void set_csselr(unsigned int cache_selector)
+{
+	writel(cache_selector, BASEADDR_V7M_SCB + V7M_SCB_CTR);
+}
+
+static inline unsigned int read_ccsidr(void)
+{
+	return readl(BASEADDR_V7M_SCB + V7M_SCB_CCSIDR);
+}
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/clocksource.h b/arch/arm/include/asm/clocksource.h
new file mode 100644
index 0000000..0b350a7
--- /dev/null
+++ b/arch/arm/include/asm/clocksource.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_CLOCKSOURCE_H
+#define _ASM_CLOCKSOURCE_H
+
+struct arch_clocksource_data {
+	bool vdso_direct;	/* Usable for direct VDSO access? */
+};
+
+#endif
diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h
index c3f1152..dbdbce1 100644
--- a/arch/arm/include/asm/cp15.h
+++ b/arch/arm/include/asm/cp15.h
@@ -49,6 +49,21 @@
 
 #ifdef CONFIG_CPU_CP15
 
+#define __ACCESS_CP15(CRn, Op1, CRm, Op2)	\
+	"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
+#define __ACCESS_CP15_64(Op1, CRm)		\
+	"mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64
+
+#define __read_sysreg(r, w, c, t) ({				\
+	t __val;						\
+	asm volatile(r " " c : "=r" (__val));			\
+	__val;							\
+})
+#define read_sysreg(...)		__read_sysreg(__VA_ARGS__)
+
+#define __write_sysreg(v, r, w, c, t)	asm volatile(w " " c : : "r" ((t)(v)))
+#define write_sysreg(v, ...)		__write_sysreg(v, __VA_ARGS__)
+
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
 static inline unsigned long get_cr(void)
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 1ee94c7..522b5fe 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -55,11 +55,13 @@
 
 #define MPIDR_LEVEL_BITS 8
 #define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1)
+#define MPIDR_LEVEL_SHIFT(level) (MPIDR_LEVEL_BITS * level)
 
 #define MPIDR_AFFINITY_LEVEL(mpidr, level) \
 	((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK)
 
 #define ARM_CPU_IMP_ARM			0x41
+#define ARM_CPU_IMP_DEC			0x44
 #define ARM_CPU_IMP_INTEL		0x69
 
 /* ARM implemented processors */
@@ -76,6 +78,17 @@
 #define ARM_CPU_PART_CORTEX_A15		0x4100c0f0
 #define ARM_CPU_PART_MASK		0xff00fff0
 
+/* DEC implemented cores */
+#define ARM_CPU_PART_SA1100		0x4400a110
+
+/* Intel implemented cores */
+#define ARM_CPU_PART_SA1110		0x6900b110
+#define ARM_CPU_REV_SA1110_A0		0
+#define ARM_CPU_REV_SA1110_B0		4
+#define ARM_CPU_REV_SA1110_B1		5
+#define ARM_CPU_REV_SA1110_B2		6
+#define ARM_CPU_REV_SA1110_B4		8
+
 #define ARM_CPU_XSCALE_ARCH_MASK	0xe000
 #define ARM_CPU_XSCALE_ARCH_V1		0x2000
 #define ARM_CPU_XSCALE_ARCH_V2		0x4000
@@ -152,6 +165,11 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void)
 	return read_cpuid(CPUID_ID);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
+{
+	return read_cpuid(CPUID_CACHETYPE);
+}
+
 #elif defined(CONFIG_CPU_V7M)
 
 static inline unsigned int __attribute_const__ read_cpuid_id(void)
@@ -159,6 +177,11 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void)
 	return readl(BASEADDR_V7M_SCB + V7M_SCB_CPUID);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
+{
+	return readl(BASEADDR_V7M_SCB + V7M_SCB_CTR);
+}
+
 #else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */
 
 static inline unsigned int __attribute_const__ read_cpuid_id(void)
@@ -173,6 +196,11 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
 	return (read_cpuid_id() & 0xFF000000) >> 24;
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_revision(void)
+{
+	return read_cpuid_id() & 0x0000000f;
+}
+
 /*
  * The CPU part number is meaningless without referring to the CPU
  * implementer: implementers are free to define their own part numbers
@@ -193,11 +221,6 @@ static inline unsigned int __attribute_const__ xscale_cpu_arch_version(void)
 	return read_cpuid_id() & ARM_CPU_XSCALE_ARCH_MASK;
 }
 
-static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
-{
-	return read_cpuid(CPUID_CACHETYPE);
-}
-
 static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
 {
 	return read_cpuid(CPUID_TCM);
@@ -208,6 +231,10 @@ static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
 	return read_cpuid(CPUID_MPIDR);
 }
 
+/* StrongARM-11x0 CPUs */
+#define cpu_is_sa1100() (read_cpuid_part() == ARM_CPU_PART_SA1100)
+#define cpu_is_sa1110() (read_cpuid_part() == ARM_CPU_PART_SA1110)
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index b7a4281..b1ce037 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -10,7 +10,7 @@
 #include <asm/param.h>	/* HZ */
 
 #define MAX_UDELAY_MS	2
-#define UDELAY_MULT	UL(2047 * HZ + 483648 * HZ / 1000000)
+#define UDELAY_MULT	UL(2147 * HZ + 483648 * HZ / 1000000)
 #define UDELAY_SHIFT	31
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index d009f79..bf02dbd 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -111,7 +111,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 /* The ARM override for dma_max_pfn() */
 static inline unsigned long dma_max_pfn(struct device *dev)
 {
-	return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+	return dma_to_pfn(dev, *dev->dma_mask);
 }
 #define dma_max_pfn(dev) dma_max_pfn(dev)
 
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
index e847d23..acf1d14 100644
--- a/arch/arm/include/asm/flat.h
+++ b/arch/arm/include/asm/flat.h
@@ -8,8 +8,9 @@
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
-#define	flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp))
-#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) \
+	({ unsigned long __val; __get_user_unaligned(__val, rp); __val; })
+#define	flat_put_addr_at_rp(rp, val, relval)	__put_user_unaligned(val, rp)
 #define	flat_get_relocate_addr(rel)		(rel)
 #define	flat_set_persistent(relval, p)		0
 
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index cab07f6..01c3d92 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -118,11 +118,7 @@
 #endif
 
 #if defined(CONFIG_CPU_V7M)
-# ifdef _CACHE
 #  define MULTI_CACHE 1
-# else
-#  define _CACHE nop
-# endif
 #endif
 
 #if !defined(_CACHE) && !defined(MULTI_CACHE)
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 3a5ec1c..736292b 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -87,6 +87,15 @@
 #define L310_CACHE_ID_RTL_R3P2		0x08
 #define L310_CACHE_ID_RTL_R3P3		0x09
 
+#define L2X0_EVENT_CNT_CTRL_ENABLE	BIT(0)
+
+#define L2X0_EVENT_CNT_CFG_SRC_SHIFT	2
+#define L2X0_EVENT_CNT_CFG_SRC_MASK	0xf
+#define L2X0_EVENT_CNT_CFG_SRC_DISABLED	0
+#define L2X0_EVENT_CNT_CFG_INT_DISABLED	0
+#define L2X0_EVENT_CNT_CFG_INT_INCR	1
+#define L2X0_EVENT_CNT_CFG_INT_OVERFLOW	2
+
 /* L2C auxiliary control register - bits common to L2C-210/220/310 */
 #define L2C_AUX_CTRL_WAY_SIZE_SHIFT		17
 #define L2C_AUX_CTRL_WAY_SIZE_MASK		(7 << 17)
@@ -157,6 +166,16 @@ static inline int l2x0_of_init(u32 aux_val, u32 aux_mask)
 }
 #endif
 
+#ifdef CONFIG_CACHE_L2X0_PMU
+void l2x0_pmu_register(void __iomem *base, u32 part);
+void l2x0_pmu_suspend(void);
+void l2x0_pmu_resume(void);
+#else
+static inline void l2x0_pmu_register(void __iomem *base, u32 part) {}
+static inline void l2x0_pmu_suspend(void) {}
+static inline void l2x0_pmu_resume(void) {}
+#endif
+
 struct l2x0_regs {
 	unsigned long phy_base;
 	unsigned long aux_ctrl;
diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h
index 102e3fb..eaa60da 100644
--- a/arch/arm/include/asm/hardware/cache-uniphier.h
+++ b/arch/arm/include/asm/hardware/cache-uniphier.h
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,28 +20,11 @@
 
 #ifdef CONFIG_CACHE_UNIPHIER
 int uniphier_cache_init(void);
-int uniphier_cache_l2_is_enabled(void);
-void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
-void uniphier_cache_l2_set_locked_ways(u32 way_mask);
 #else
 static inline int uniphier_cache_init(void)
 {
 	return -ENODEV;
 }
-
-static inline int uniphier_cache_l2_is_enabled(void)
-{
-	return 0;
-}
-
-static inline void uniphier_cache_l2_touch_range(unsigned long start,
-						 unsigned long end)
-{
-}
-
-static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
-{
-}
 #endif
 
 #endif /* __CACHE_UNIPHIER_H */
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 7c2bbc7..8979fa3 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -420,7 +420,7 @@ struct sa1111_dev {
 	u64		dma_mask;
 };
 
-#define SA1111_DEV(_d)	container_of((_d), struct sa1111_dev, dev)
+#define to_sa1111_device(x)	container_of(x, struct sa1111_dev, dev)
 
 #define sa1111_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
 #define sa1111_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
@@ -446,6 +446,8 @@ struct sa1111_driver {
 int sa1111_enable_device(struct sa1111_dev *);
 void sa1111_disable_device(struct sa1111_dev *);
 
+int sa1111_get_irq(struct sa1111_dev *, unsigned num);
+
 unsigned int sa1111_pll_clock(struct sa1111_dev *);
 
 #define SA1111_AUDIO_ACLINK	0
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 8e427c7..afcaf8b 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -114,7 +114,6 @@ struct notifier_block;
 struct perf_event;
 struct pmu;
 
-extern struct pmu perf_ops_bp;
 extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
 				  int *gen_len, int *gen_type);
 extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 1bd9510de..e53638c 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -36,8 +36,9 @@ extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 #endif
 
 #ifdef CONFIG_SMP
-extern void arch_trigger_all_cpu_backtrace(bool);
-#define arch_trigger_all_cpu_backtrace(x) arch_trigger_all_cpu_backtrace(x)
+extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
+					   bool exclude_self);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 #endif
 
 static inline int nr_legacy_irqs(void)
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index 58faff5..d7ea6bc 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -21,6 +21,10 @@
 
 #include <asm/virt.h>
 
+#define ARM_EXIT_WITH_ABORT_BIT  31
+#define ARM_EXCEPTION_CODE(x)	  ((x) & ~(1U << ARM_EXIT_WITH_ABORT_BIT))
+#define ARM_ABORT_PENDING(x)	  !!((x) & (1U << ARM_EXIT_WITH_ABORT_BIT))
+
 #define ARM_EXCEPTION_RESET	  0
 #define ARM_EXCEPTION_UNDEFINED   1
 #define ARM_EXCEPTION_SOFTWARE    2
@@ -68,6 +72,9 @@ extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
 extern void __init_stage2_translation(void);
 
 extern void __kvm_hyp_reset(unsigned long);
+
+extern u64 __vgic_v3_get_ich_vtr_el2(void);
+extern void __vgic_v3_init_lrs(void);
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
index ee5328f..9a8a45a 100644
--- a/arch/arm/include/asm/kvm_emulate.h
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -40,18 +40,29 @@ static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
 	*vcpu_reg(vcpu, reg_num) = val;
 }
 
-bool kvm_condition_valid(struct kvm_vcpu *vcpu);
-void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr);
+bool kvm_condition_valid32(const struct kvm_vcpu *vcpu);
+void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr);
 void kvm_inject_undefined(struct kvm_vcpu *vcpu);
+void kvm_inject_vabt(struct kvm_vcpu *vcpu);
 void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr);
 void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
 
+static inline bool kvm_condition_valid(const struct kvm_vcpu *vcpu)
+{
+	return kvm_condition_valid32(vcpu);
+}
+
+static inline void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr)
+{
+	kvm_skip_instr32(vcpu, is_wide_instr);
+}
+
 static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.hcr = HCR_GUEST_MASK;
 }
 
-static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu)
+static inline unsigned long vcpu_get_hcr(const struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.hcr;
 }
@@ -61,7 +72,7 @@ static inline void vcpu_set_hcr(struct kvm_vcpu *vcpu, unsigned long hcr)
 	vcpu->arch.hcr = hcr;
 }
 
-static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu)
+static inline bool vcpu_mode_is_32bit(const struct kvm_vcpu *vcpu)
 {
 	return 1;
 }
@@ -71,9 +82,9 @@ static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu)
 	return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc;
 }
 
-static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu)
+static inline unsigned long *vcpu_cpsr(const struct kvm_vcpu *vcpu)
 {
-	return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr;
+	return (unsigned long *)&vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr;
 }
 
 static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
@@ -93,11 +104,21 @@ static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu)
 	return cpsr_mode > USR_MODE;;
 }
 
-static inline u32 kvm_vcpu_get_hsr(struct kvm_vcpu *vcpu)
+static inline u32 kvm_vcpu_get_hsr(const struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.fault.hsr;
 }
 
+static inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu)
+{
+	u32 hsr = kvm_vcpu_get_hsr(vcpu);
+
+	if (hsr & HSR_CV)
+		return (hsr & HSR_COND) >> HSR_COND_SHIFT;
+
+	return -1;
+}
+
 static inline unsigned long kvm_vcpu_get_hfar(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.fault.hxfar;
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index de338d9..2d19e02 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -39,7 +39,12 @@
 
 #include <kvm/arm_vgic.h>
 
+
+#ifdef CONFIG_ARM_GIC_V3
+#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
+#else
 #define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS
+#endif
 
 #define KVM_REQ_VCPU_EXIT	8
 
@@ -183,15 +188,15 @@ struct kvm_vcpu_arch {
 };
 
 struct kvm_vm_stat {
-	u32 remote_tlb_flush;
+	ulong remote_tlb_flush;
 };
 
 struct kvm_vcpu_stat {
-	u32 halt_successful_poll;
-	u32 halt_attempted_poll;
-	u32 halt_poll_invalid;
-	u32 halt_wakeup;
-	u32 hvc_exit_stat;
+	u64 halt_successful_poll;
+	u64 halt_attempted_poll;
+	u64 halt_poll_invalid;
+	u64 halt_wakeup;
+	u64 hvc_exit_stat;
 	u64 wfe_exit_stat;
 	u64 wfi_exit_stat;
 	u64 mmio_exit_user;
diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h
index 6eaff28..343135e 100644
--- a/arch/arm/include/asm/kvm_hyp.h
+++ b/arch/arm/include/asm/kvm_hyp.h
@@ -20,28 +20,15 @@
 
 #include <linux/compiler.h>
 #include <linux/kvm_host.h>
+#include <asm/cp15.h>
 #include <asm/kvm_mmu.h>
 #include <asm/vfp.h>
 
 #define __hyp_text __section(.hyp.text) notrace
 
-#define __ACCESS_CP15(CRn, Op1, CRm, Op2)	\
-	"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
-#define __ACCESS_CP15_64(Op1, CRm)		\
-	"mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64
 #define __ACCESS_VFP(CRn)			\
 	"mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32
 
-#define __write_sysreg(v, r, w, c, t)	asm volatile(w " " c : : "r" ((t)(v)))
-#define write_sysreg(v, ...)		__write_sysreg(v, __VA_ARGS__)
-
-#define __read_sysreg(r, w, c, t) ({				\
-	t __val;						\
-	asm volatile(r " " c : "=r" (__val));			\
-	__val;							\
-})
-#define read_sysreg(...)		__read_sysreg(__VA_ARGS__)
-
 #define write_special(v, r)					\
 	asm volatile("msr " __stringify(r) ", %0" : : "r" (v))
 #define read_special(r) ({					\
@@ -119,6 +106,9 @@ void __vgic_v2_restore_state(struct kvm_vcpu *vcpu);
 void __sysreg_save_state(struct kvm_cpu_context *ctxt);
 void __sysreg_restore_state(struct kvm_cpu_context *ctxt);
 
+void __vgic_v3_save_state(struct kvm_vcpu *vcpu);
+void __vgic_v3_restore_state(struct kvm_vcpu *vcpu);
+
 void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp);
 void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp);
 static inline bool __vfp_enabled(void)
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 3bb803d..74a44727 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -63,37 +63,13 @@ void kvm_clear_hyp_idmap(void);
 static inline void kvm_set_pmd(pmd_t *pmd, pmd_t new_pmd)
 {
 	*pmd = new_pmd;
-	flush_pmd_entry(pmd);
+	dsb(ishst);
 }
 
 static inline void kvm_set_pte(pte_t *pte, pte_t new_pte)
 {
 	*pte = new_pte;
-	/*
-	 * flush_pmd_entry just takes a void pointer and cleans the necessary
-	 * cache entries, so we can reuse the function for ptes.
-	 */
-	flush_pmd_entry(pte);
-}
-
-static inline void kvm_clean_pgd(pgd_t *pgd)
-{
-	clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t));
-}
-
-static inline void kvm_clean_pmd(pmd_t *pmd)
-{
-	clean_dcache_area(pmd, PTRS_PER_PMD * sizeof(pmd_t));
-}
-
-static inline void kvm_clean_pmd_entry(pmd_t *pmd)
-{
-	clean_pmd_entry(pmd);
-}
-
-static inline void kvm_clean_pte(pte_t *pte)
-{
-	clean_pte_table(pte);
+	dsb(ishst);
 }
 
 static inline pte_t kvm_s2pte_mkwrite(pte_t pte)
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 31c07a2..76cbd9c 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -159,13 +159,8 @@
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.
  */
-#if defined(__virt_to_phys)
-#define PHYS_OFFSET	PLAT_PHYS_OFFSET
-#define PHYS_PFN_OFFSET	((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT))
-
-#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
 
-#elif defined(CONFIG_ARM_PATCH_PHYS_VIRT)
+#if defined(CONFIG_ARM_PATCH_PHYS_VIRT)
 
 /*
  * Constants used to force the right instruction encodings and shifts
@@ -182,10 +177,6 @@ extern const void *__pv_table_begin, *__pv_table_end;
 #define PHYS_OFFSET	((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT)
 #define PHYS_PFN_OFFSET	(__pv_phys_pfn_offset)
 
-#define virt_to_pfn(kaddr) \
-	((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \
-	 PHYS_PFN_OFFSET)
-
 #define __pv_stub(from,to,instr,type)			\
 	__asm__("@ __pv_stub\n"				\
 	"1:	" instr "	%0, %1, %2\n"		\
@@ -257,12 +248,12 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
 	return x - PHYS_OFFSET + PAGE_OFFSET;
 }
 
+#endif
+
 #define virt_to_pfn(kaddr) \
 	((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \
 	 PHYS_PFN_OFFSET)
 
-#endif
-
 /*
  * These are *only* valid on the kernel direct mapped RAM memory.
  * Note: Drivers should NOT use these.  They are the wrong
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index e358b79..464748b 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -23,10 +23,8 @@ struct mod_arch_specific {
 	struct unwind_table *unwind[ARM_SEC_MAX];
 #endif
 #ifdef CONFIG_ARM_MODULE_PLTS
-	struct elf32_shdr   *core_plt;
-	struct elf32_shdr   *init_plt;
-	int		    core_plt_count;
-	int		    init_plt_count;
+	struct elf32_shdr   *plt;
+	int		    plt_count;
 #endif
 };
 
diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h
index d0131ee..3f82e9d 100644
--- a/arch/arm/include/asm/pgtable-2level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-2level-hwdef.h
@@ -47,6 +47,7 @@
 #define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
 #define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_CACHE_MASK	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
 #define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
 
 /*
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index f8f1cff..4cd664a 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -62,6 +62,7 @@
 #define PMD_SECT_WT		(_AT(pmdval_t, 2) << 2)	/* normal inner write-through */
 #define PMD_SECT_WB		(_AT(pmdval_t, 3) << 2)	/* normal inner write-back */
 #define PMD_SECT_WBWA		(_AT(pmdval_t, 7) << 2)	/* normal inner write-alloc */
+#define PMD_SECT_CACHE_MASK	(_AT(pmdval_t, 7) << 2)
 
 /*
  * + Level 3 descriptor (PTE)
diff --git a/arch/arm/include/asm/trusted_foundations.h b/arch/arm/include/asm/trusted_foundations.h
index 624e1d4..0074835 100644
--- a/arch/arm/include/asm/trusted_foundations.h
+++ b/arch/arm/include/asm/trusted_foundations.h
@@ -26,7 +26,6 @@
 #ifndef __ASM_ARM_TRUSTED_FOUNDATIONS_H
 #define __ASM_ARM_TRUSTED_FOUNDATIONS_H
 
-#include <linux/kconfig.h>
 #include <linux/printk.h>
 #include <linux/bug.h>
 #include <linux/of.h>
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index 615781c..1fd775c 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -24,6 +24,9 @@
 
 #define V7M_SCB_CCR			0x14
 #define V7M_SCB_CCR_STKALIGN			(1 << 9)
+#define V7M_SCB_CCR_DC				(1 << 16)
+#define V7M_SCB_CCR_IC				(1 << 17)
+#define V7M_SCB_CCR_BP				(1 << 18)
 
 #define V7M_SCB_SHPR2			0x1c
 #define V7M_SCB_SHPR3			0x20
@@ -47,6 +50,25 @@
 #define EXC_RET_STACK_MASK			0x00000004
 #define EXC_RET_THREADMODE_PROCESSSTACK		0xfffffffd
 
+/* Cache related definitions */
+
+#define	V7M_SCB_CLIDR		0x78	/* Cache Level ID register */
+#define	V7M_SCB_CTR		0x7c	/* Cache Type register */
+#define	V7M_SCB_CCSIDR		0x80	/* Cache size ID register */
+#define	V7M_SCB_CSSELR		0x84	/* Cache size selection register */
+
+/* Cache opeartions */
+#define	V7M_SCB_ICIALLU		0x250	/* I-cache invalidate all to PoU */
+#define	V7M_SCB_ICIMVAU		0x258	/* I-cache invalidate by MVA to PoU */
+#define	V7M_SCB_DCIMVAC		0x25c	/* D-cache invalidate by MVA to PoC */
+#define	V7M_SCB_DCISW		0x260	/* D-cache invalidate by set-way */
+#define	V7M_SCB_DCCMVAU		0x264	/* D-cache clean by MVA to PoU */
+#define	V7M_SCB_DCCMVAC		0x268	/* D-cache clean by MVA to PoC */
+#define	V7M_SCB_DCCSW		0x26c	/* D-cache clean by set-way */
+#define	V7M_SCB_DCCIMVAC	0x270	/* D-cache clean and invalidate by MVA to PoC */
+#define	V7M_SCB_DCCISW		0x274	/* D-cache clean and invalidate by set-way */
+#define	V7M_SCB_BPIALL		0x278	/* D-cache clean and invalidate by set-way */
+
 #ifndef __ASSEMBLY__
 
 enum reboot_mode;
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
new file mode 100644
index 0000000..9113d7b
--- /dev/null
+++ b/arch/arm/include/debug/brcmstb.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/serial_reg.h>
+
+/* Physical register offset and virtual register offset */
+#define REG_PHYS_BASE		0xf0000000
+#define REG_VIRT_BASE		0xfc000000
+#define REG_PHYS_ADDR(x)	((x) + REG_PHYS_BASE)
+
+/* Product id can be read from here */
+#define SUN_TOP_CTRL_BASE	REG_PHYS_ADDR(0x404000)
+
+#define UARTA_3390		REG_PHYS_ADDR(0x40a900)
+#define UARTA_7250		REG_PHYS_ADDR(0x40b400)
+#define UARTA_7268		REG_PHYS_ADDR(0x40c000)
+#define UARTA_7271		UARTA_7268
+#define UARTA_7364		REG_PHYS_ADDR(0x40b000)
+#define UARTA_7366		UARTA_7364
+#define UARTA_74371		REG_PHYS_ADDR(0x406b00)
+#define UARTA_7439		REG_PHYS_ADDR(0x40a900)
+#define UARTA_7445		REG_PHYS_ADDR(0x40ab00)
+
+#define UART_SHIFT		2
+
+#define checkuart(rp, rv, family_id, family) \
+		/* Load family id */ \
+		ldr	rp, =family_id ; \
+		/* Compare SUN_TOP_CTRL value against it */ \
+		cmp	rp, rv ; \
+		/* Passed test, load address */ \
+		ldreq	rp, =UARTA_##family ; \
+		/* Jump to save UART address */ \
+		beq	91f
+
+		.macro  addruart, rp, rv, tmp
+		adr	\rp, 99f		@ actual addr of 99f
+		ldr	\rv, [\rp]		@ linked addr is stored there
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ linked brcmstb_uart_config
+		sub	\tmp, \rp, \rv		@ actual brcmstb_uart_config
+		ldr	\rp, [\tmp]		@ Load brcmstb_uart_config
+		cmp	\rp, #1			@ needs initialization?
+		bne	100f			@ no; go load the addresses
+		mov	\rv, #0			@ yes; record init is done
+		str	\rv, [\tmp]
+
+		/* Check SUN_TOP_CTRL base */
+		ldr	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
+		ldr	\rv, [\rp, #0]		@ get register contents
+		and	\rv, \rv, #0xffffff00	@ strip revision bits [7:0]
+
+		/* Chip specific detection starts here */
+20:		checkuart(\rp, \rv, 0x33900000, 3390)
+21:		checkuart(\rp, \rv, 0x72500000, 7250)
+22:		checkuart(\rp, \rv, 0x72680000, 7268)
+23:		checkuart(\rp, \rv, 0x72710000, 7271)
+24:		checkuart(\rp, \rv, 0x73640000, 7364)
+25:		checkuart(\rp, \rv, 0x73660000, 7366)
+26:		checkuart(\rp, \rv, 0x07437100, 74371)
+27:		checkuart(\rp, \rv, 0x74390000, 7439)
+28:		checkuart(\rp, \rv, 0x74450000, 7445)
+
+		/* No valid UART found */
+90:		mov	\rp, #0
+		/* fall through */
+
+		/* Record whichever UART we chose */
+91:		str	\rp, [\tmp, #4]		@ Store in brcmstb_uart_phys
+		cmp	\rp, #0			@ Valid UART address?
+		bne	92f			@ Yes, go process it
+		str	\rp, [\tmp, #8]		@ Store 0 in brcmstb_uart_virt
+		b	100f			@ Done
+92:		and     \rv, \rp, #0xffffff	@ offset within 16MB section
+		add	\rv, \rv, #REG_VIRT_BASE
+		str	\rv, [\tmp, #8]		@ Store in brcmstb_uart_virt
+		b	100f
+
+		.align
+99:		.word	.
+		.word	brcmstb_uart_config
+		.ltorg
+
+		/* Load previously selected UART address */
+100:		ldr	\rp, [\tmp, #4]		@ Load brcmstb_uart_phys
+		ldr	\rv, [\tmp, #8]		@ Load brcmstb_uart_virt
+		.endm
+
+		.macro	store, rd, rx:vararg
+		str	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldr	\rd, \rx
+		.endm
+
+		.macro	senduart,rd,rx
+		store	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+/*
+ * Storage for the state maintained by the macros above.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-bcm/brcmstb.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the symbol/storage right here, since common.c
+ * isn't included in the decompressor build. This symbol gets put in .text
+ * even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+#if defined(ZIMAGE)
+brcmstb_uart_config:
+	/* Debug UART initialization required */
+	.word 1
+	/* Debug UART physical address */
+	.word 0
+	/* Debug UART virtual address */
+	.word 0
+#endif
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
index a2b3eb3..b38c10c 100644
--- a/arch/arm/include/uapi/asm/kvm.h
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -84,6 +84,13 @@ struct kvm_regs {
 #define KVM_VGIC_V2_DIST_SIZE		0x1000
 #define KVM_VGIC_V2_CPU_SIZE		0x2000
 
+/* Supported VGICv3 address types  */
+#define KVM_VGIC_V3_ADDR_TYPE_DIST	2
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST	3
+
+#define KVM_VGIC_V3_DIST_SIZE		SZ_64K
+#define KVM_VGIC_V3_REDIST_SIZE		(2 * SZ_64K)
+
 #define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
 #define KVM_ARM_VCPU_PSCI_0_2		1 /* CPU uses PSCI v0.2 */
 
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 7dccc96..a3308ad 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -19,7 +19,7 @@ extern struct of_cpuidle_method __cpuidle_method_of_table[];
 static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel
 	__used __section(__cpuidle_method_of_table_end);
 
-static struct cpuidle_ops cpuidle_ops[NR_CPUS];
+static struct cpuidle_ops cpuidle_ops[NR_CPUS] __ro_after_init;
 
 /**
  * arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle()
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 40ecd5f..f676feb 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -88,6 +88,8 @@ void __init arm_dt_init_cpu_maps(void)
 		return;
 
 	for_each_child_of_node(cpus, cpu) {
+		const __be32 *cell;
+		int prop_bytes;
 		u32 hwid;
 
 		if (of_node_cmp(cpu->type, "cpu"))
@@ -99,7 +101,8 @@ void __init arm_dt_init_cpu_maps(void)
 		 * properties is considered invalid to build the
 		 * cpu_logical_map.
 		 */
-		if (of_property_read_u32(cpu, "reg", &hwid)) {
+		cell = of_get_property(cpu, "reg", &prop_bytes);
+		if (!cell || prop_bytes < sizeof(*cell)) {
 			pr_debug(" * %s missing reg property\n",
 				     cpu->full_name);
 			of_node_put(cpu);
@@ -107,10 +110,15 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		/*
-		 * 8 MSBs must be set to 0 in the DT since the reg property
+		 * Bits n:24 must be set to 0 in the DT since the reg property
 		 * defines the MPIDR[23:0].
 		 */
-		if (hwid & ~MPIDR_HWID_BITMASK) {
+		do {
+			hwid = be32_to_cpu(*cell++);
+			prop_bytes -= sizeof(*cell);
+		} while (!hwid && prop_bytes > 0);
+
+		if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
 			of_node_put(cpu);
 			return;
 		}
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 709ee1d..3f17594 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -218,7 +218,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	}
 
 	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer);
+				       frame_pointer, NULL);
 	if (err == -EBUSY) {
 		*parent = old;
 		return;
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index fb1a69e..6b4eb27 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -158,7 +158,21 @@ __after_proc_init:
 	bic	r0, r0, #CR_V
 #endif
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
-#endif /* CONFIG_CPU_CP15 */
+#elif defined (CONFIG_CPU_V7M)
+	/* For V7M systems we want to modify the CCR similarly to the SCTLR */
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #V7M_SCB_CCR_DC
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+	bic	r0, r0, #V7M_SCB_CCR_BP
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+	bic	r0, r0, #V7M_SCB_CCR_IC
+#endif
+	movw	r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
+	movt	r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
+	str	r0, [r3]
+#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
 	ret	lr
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 0b1e4a9..15d073a 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -142,6 +142,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 	and	r7, #0x1f		@ Preserve HPMN
 	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
 
+	@ Make sure NS-SVC is initialised appropriately
+	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
+	orr	r7, #(1 << 5)		@ CP15 barriers enabled
+	bic	r7, #(3 << 7)		@ Clear SED/ITD for v8 (RES0 for v7)
+	bic	r7, #(3 << 19)		@ WXN and UWXN disabled
+	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
+
+	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
+	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
+
+	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
+	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
+
 #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
 	@ make CNTP_* and CNTPCT accessible from PL1
 	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index 0c7efc3..3a5cba9 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -9,6 +9,7 @@
 #include <linux/elf.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/sort.h>
 
 #include <asm/cache.h>
 #include <asm/opcodes.h>
@@ -30,154 +31,198 @@ struct plt_entries {
 	u32	lit[PLT_ENT_COUNT];
 };
 
-static bool in_init(const struct module *mod, u32 addr)
+u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
-	return addr - (u32)mod->init_layout.base < mod->init_layout.size;
+	struct plt_entries *plt = (struct plt_entries *)mod->arch.plt->sh_addr;
+	int idx = 0;
+
+	/*
+	 * Look for an existing entry pointing to 'val'. Given that the
+	 * relocations are sorted, this will be the last entry we allocated.
+	 * (if one exists).
+	 */
+	if (mod->arch.plt_count > 0) {
+		plt += (mod->arch.plt_count - 1) / PLT_ENT_COUNT;
+		idx = (mod->arch.plt_count - 1) % PLT_ENT_COUNT;
+
+		if (plt->lit[idx] == val)
+			return (u32)&plt->ldr[idx];
+
+		idx = (idx + 1) % PLT_ENT_COUNT;
+		if (!idx)
+			plt++;
+	}
+
+	mod->arch.plt_count++;
+	BUG_ON(mod->arch.plt_count * PLT_ENT_SIZE > mod->arch.plt->sh_size);
+
+	if (!idx)
+		/* Populate a new set of entries */
+		*plt = (struct plt_entries){
+			{ [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, },
+			{ val, }
+		};
+	else
+		plt->lit[idx] = val;
+
+	return (u32)&plt->ldr[idx];
 }
 
-u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
+#define cmp_3way(a,b)	((a) < (b) ? -1 : (a) > (b))
+
+static int cmp_rel(const void *a, const void *b)
 {
-	struct plt_entries *plt, *plt_end;
-	int c, *count;
-
-	if (in_init(mod, loc)) {
-		plt = (void *)mod->arch.init_plt->sh_addr;
-		plt_end = (void *)plt + mod->arch.init_plt->sh_size;
-		count = &mod->arch.init_plt_count;
-	} else {
-		plt = (void *)mod->arch.core_plt->sh_addr;
-		plt_end = (void *)plt + mod->arch.core_plt->sh_size;
-		count = &mod->arch.core_plt_count;
-	}
+	const Elf32_Rel *x = a, *y = b;
+	int i;
 
-	/* Look for an existing entry pointing to 'val' */
-	for (c = *count; plt < plt_end; c -= PLT_ENT_COUNT, plt++) {
-		int i;
-
-		if (!c) {
-			/* Populate a new set of entries */
-			*plt = (struct plt_entries){
-				{ [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, },
-				{ val, }
-			};
-			++*count;
-			return (u32)plt->ldr;
-		}
-		for (i = 0; i < PLT_ENT_COUNT; i++) {
-			if (!plt->lit[i]) {
-				plt->lit[i] = val;
-				++*count;
-			}
-			if (plt->lit[i] == val)
-				return (u32)&plt->ldr[i];
-		}
+	/* sort by type and symbol index */
+	i = cmp_3way(ELF32_R_TYPE(x->r_info), ELF32_R_TYPE(y->r_info));
+	if (i == 0)
+		i = cmp_3way(ELF32_R_SYM(x->r_info), ELF32_R_SYM(y->r_info));
+	return i;
+}
+
+static bool is_zero_addend_relocation(Elf32_Addr base, const Elf32_Rel *rel)
+{
+	u32 *tval = (u32 *)(base + rel->r_offset);
+
+	/*
+	 * Do a bitwise compare on the raw addend rather than fully decoding
+	 * the offset and doing an arithmetic comparison.
+	 * Note that a zero-addend jump/call relocation is encoded taking the
+	 * PC bias into account, i.e., -8 for ARM and -4 for Thumb2.
+	 */
+	switch (ELF32_R_TYPE(rel->r_info)) {
+		u16 upper, lower;
+
+	case R_ARM_THM_CALL:
+	case R_ARM_THM_JUMP24:
+		upper = __mem_to_opcode_thumb16(((u16 *)tval)[0]);
+		lower = __mem_to_opcode_thumb16(((u16 *)tval)[1]);
+
+		return (upper & 0x7ff) == 0x7ff && (lower & 0x2fff) == 0x2ffe;
+
+	case R_ARM_CALL:
+	case R_ARM_PC24:
+	case R_ARM_JUMP24:
+		return (__mem_to_opcode_arm(*tval) & 0xffffff) == 0xfffffe;
 	}
 	BUG();
 }
 
-static int duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num,
-			   u32 mask)
+static bool duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num)
 {
-	u32 *loc1, *loc2;
-	int i;
+	const Elf32_Rel *prev;
 
-	for (i = 0; i < num; i++) {
-		if (rel[i].r_info != rel[num].r_info)
-			continue;
+	/*
+	 * Entries are sorted by type and symbol index. That means that,
+	 * if a duplicate entry exists, it must be in the preceding
+	 * slot.
+	 */
+	if (!num)
+		return false;
 
-		/*
-		 * Identical relocation types against identical symbols can
-		 * still result in different PLT entries if the addend in the
-		 * place is different. So resolve the target of the relocation
-		 * to compare the values.
-		 */
-		loc1 = (u32 *)(base + rel[i].r_offset);
-		loc2 = (u32 *)(base + rel[num].r_offset);
-		if (((*loc1 ^ *loc2) & mask) == 0)
-			return 1;
-	}
-	return 0;
+	prev = rel + num - 1;
+	return cmp_rel(rel + num, prev) == 0 &&
+	       is_zero_addend_relocation(base, prev);
 }
 
 /* Count how many PLT entries we may need */
-static unsigned int count_plts(Elf32_Addr base, const Elf32_Rel *rel, int num)
+static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
+			       const Elf32_Rel *rel, int num)
 {
 	unsigned int ret = 0;
+	const Elf32_Sym *s;
 	int i;
 
-	/*
-	 * Sure, this is order(n^2), but it's usually short, and not
-	 * time critical
-	 */
-	for (i = 0; i < num; i++)
+	for (i = 0; i < num; i++) {
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 		case R_ARM_CALL:
 		case R_ARM_PC24:
 		case R_ARM_JUMP24:
-			if (!duplicate_rel(base, rel, i,
-					   __opcode_to_mem_arm(0x00ffffff)))
-				ret++;
-			break;
-#ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
-			if (!duplicate_rel(base, rel, i,
-					   __opcode_to_mem_thumb32(0x07ff2fff)))
+			/*
+			 * We only have to consider branch targets that resolve
+			 * to undefined symbols. This is not simply a heuristic,
+			 * it is a fundamental limitation, since the PLT itself
+			 * is part of the module, and needs to be within range
+			 * as well, so modules can never grow beyond that limit.
+			 */
+			s = syms + ELF32_R_SYM(rel[i].r_info);
+			if (s->st_shndx != SHN_UNDEF)
+				break;
+
+			/*
+			 * Jump relocations with non-zero addends against
+			 * undefined symbols are supported by the ELF spec, but
+			 * do not occur in practice (e.g., 'jump n bytes past
+			 * the entry point of undefined function symbol f').
+			 * So we need to support them, but there is no need to
+			 * take them into consideration when trying to optimize
+			 * this code. So let's only check for duplicates when
+			 * the addend is zero.
+			 */
+			if (!is_zero_addend_relocation(base, rel + i) ||
+			    !duplicate_rel(base, rel, i))
 				ret++;
-#endif
 		}
+	}
 	return ret;
 }
 
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long core_plts = 0, init_plts = 0;
+	unsigned long plts = 0;
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
+	Elf32_Sym *syms = NULL;
 
 	/*
 	 * To store the PLTs, we expand the .text section for core module code
-	 * and the .init.text section for initialization code.
+	 * and for initialization code.
 	 */
-	for (s = sechdrs; s < sechdrs_end; ++s)
-		if (strcmp(".core.plt", secstrings + s->sh_name) == 0)
-			mod->arch.core_plt = s;
-		else if (strcmp(".init.plt", secstrings + s->sh_name) == 0)
-			mod->arch.init_plt = s;
-
-	if (!mod->arch.core_plt || !mod->arch.init_plt) {
-		pr_err("%s: sections missing\n", mod->name);
+	for (s = sechdrs; s < sechdrs_end; ++s) {
+		if (strcmp(".plt", secstrings + s->sh_name) == 0)
+			mod->arch.plt = s;
+		else if (s->sh_type == SHT_SYMTAB)
+			syms = (Elf32_Sym *)s->sh_addr;
+	}
+
+	if (!mod->arch.plt) {
+		pr_err("%s: module PLT section missing\n", mod->name);
+		return -ENOEXEC;
+	}
+	if (!syms) {
+		pr_err("%s: module symtab section missing\n", mod->name);
 		return -ENOEXEC;
 	}
 
 	for (s = sechdrs + 1; s < sechdrs_end; ++s) {
-		const Elf32_Rel *rels = (void *)ehdr + s->sh_offset;
+		Elf32_Rel *rels = (void *)ehdr + s->sh_offset;
 		int numrels = s->sh_size / sizeof(Elf32_Rel);
 		Elf32_Shdr *dstsec = sechdrs + s->sh_info;
 
 		if (s->sh_type != SHT_REL)
 			continue;
 
-		if (strstr(secstrings + s->sh_name, ".init"))
-			init_plts += count_plts(dstsec->sh_addr, rels, numrels);
-		else
-			core_plts += count_plts(dstsec->sh_addr, rels, numrels);
+		/* ignore relocations that operate on non-exec sections */
+		if (!(dstsec->sh_flags & SHF_EXECINSTR))
+			continue;
+
+		/* sort by type and symbol index */
+		sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
+
+		plts += count_plts(syms, dstsec->sh_addr, rels, numrels);
 	}
 
-	mod->arch.core_plt->sh_type = SHT_NOBITS;
-	mod->arch.core_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
-	mod->arch.core_plt->sh_addralign = L1_CACHE_BYTES;
-	mod->arch.core_plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
-					       sizeof(struct plt_entries));
-	mod->arch.core_plt_count = 0;
-
-	mod->arch.init_plt->sh_type = SHT_NOBITS;
-	mod->arch.init_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
-	mod->arch.init_plt->sh_addralign = L1_CACHE_BYTES;
-	mod->arch.init_plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
-					       sizeof(struct plt_entries));
-	mod->arch.init_plt_count = 0;
-	pr_debug("%s: core.plt=%x, init.plt=%x\n", __func__,
-		 mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size);
+	mod->arch.plt->sh_type = SHT_NOBITS;
+	mod->arch.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+	mod->arch.plt->sh_addralign = L1_CACHE_BYTES;
+	mod->arch.plt->sh_size = round_up(plts * PLT_ENT_SIZE,
+					  sizeof(struct plt_entries));
+	mod->arch.plt_count = 0;
+
+	pr_debug("%s: plt=%x\n", __func__, mod->arch.plt->sh_size);
 	return 0;
 }
diff --git a/arch/arm/kernel/module.lds b/arch/arm/kernel/module.lds
index 3682fa1..05881e2 100644
--- a/arch/arm/kernel/module.lds
+++ b/arch/arm/kernel/module.lds
@@ -1,4 +1,3 @@
 SECTIONS {
-        .core.plt : { BYTE(0) }
-        .init.plt : { BYTE(0) }
+	.plt : { BYTE(0) }
 }
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 1506385..b942349 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -596,12 +596,6 @@ static struct attribute_group armv7_pmuv1_events_attr_group = {
 	.attrs = armv7_pmuv1_event_attrs,
 };
 
-static const struct attribute_group *armv7_pmuv1_attr_groups[] = {
-	&armv7_pmuv1_events_attr_group,
-	&armv7_pmu_format_attr_group,
-	NULL,
-};
-
 ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS);
 ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS);
 ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB);
@@ -653,12 +647,6 @@ static struct attribute_group armv7_pmuv2_events_attr_group = {
 	.attrs = armv7_pmuv2_event_attrs,
 };
 
-static const struct attribute_group *armv7_pmuv2_attr_groups[] = {
-	&armv7_pmuv2_events_attr_group,
-	&armv7_pmu_format_attr_group,
-	NULL,
-};
-
 /*
  * Perf Events' indices
  */
@@ -1208,7 +1196,10 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a8";
 	cpu_pmu->map_event	= armv7_a8_map_event;
-	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv1_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1217,7 +1208,10 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a9";
 	cpu_pmu->map_event	= armv7_a9_map_event;
-	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv1_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1226,7 +1220,10 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a5";
 	cpu_pmu->map_event	= armv7_a5_map_event;
-	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv1_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1236,7 +1233,10 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a15";
 	cpu_pmu->map_event	= armv7_a15_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv2_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1246,7 +1246,10 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a7";
 	cpu_pmu->map_event	= armv7_a7_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv2_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1256,7 +1259,10 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a12";
 	cpu_pmu->map_event	= armv7_a12_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
-	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv2_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1264,7 +1270,10 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int ret = armv7_a12_pmu_init(cpu_pmu);
 	cpu_pmu->name = "armv7_cortex_a17";
-	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv7_pmuv2_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv7_pmu_format_attr_group;
 	return ret;
 }
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 612eb53..91d2d5b 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -318,8 +318,7 @@ unsigned long get_wchan(struct task_struct *p)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index df7f2a7..34e3f3c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -114,19 +114,19 @@ EXPORT_SYMBOL(elf_hwcap2);
 
 
 #ifdef MULTI_CPU
-struct processor processor __read_mostly;
+struct processor processor __ro_after_init;
 #endif
 #ifdef MULTI_TLB
-struct cpu_tlb_fns cpu_tlb __read_mostly;
+struct cpu_tlb_fns cpu_tlb __ro_after_init;
 #endif
 #ifdef MULTI_USER
-struct cpu_user_fns cpu_user __read_mostly;
+struct cpu_user_fns cpu_user __ro_after_init;
 #endif
 #ifdef MULTI_CACHE
-struct cpu_cache_fns cpu_cache __read_mostly;
+struct cpu_cache_fns cpu_cache __ro_after_init;
 #endif
 #ifdef CONFIG_OUTER_CACHE
-struct outer_cache_fns outer_cache __read_mostly;
+struct outer_cache_fns outer_cache __ro_after_init;
 EXPORT_SYMBOL(outer_cache);
 #endif
 
@@ -290,12 +290,9 @@ static int cpu_has_aliasing_icache(unsigned int arch)
 	/* arch specifies the register format */
 	switch (arch) {
 	case CPU_ARCH_ARMv7:
-		asm("mcr	p15, 2, %0, c0, c0, 0 @ set CSSELR"
-		    : /* No output operands */
-		    : "r" (1));
+		set_csselr(CSSELR_ICACHE | CSSELR_L1);
 		isb();
-		asm("mrc	p15, 1, %0, c0, c0, 0 @ read CCSIDR"
-		    : "=r" (id_reg));
+		id_reg = read_ccsidr();
 		line_size = 4 << ((id_reg & 0x7) + 2);
 		num_sets = ((id_reg >> 13) & 0x7fff) + 1;
 		aliasing_icache = (line_size * num_sets) > PAGE_SIZE;
@@ -315,11 +312,12 @@ static void __init cacheid_init(void)
 {
 	unsigned int arch = cpu_architecture();
 
-	if (arch == CPU_ARCH_ARMv7M) {
-		cacheid = 0;
-	} else if (arch >= CPU_ARCH_ARMv6) {
+	if (arch >= CPU_ARCH_ARMv6) {
 		unsigned int cachetype = read_cpuid_cachetype();
-		if ((cachetype & (7 << 29)) == 4 << 29) {
+
+		if ((arch == CPU_ARCH_ARMv7M) && !cachetype) {
+			cacheid = 0;
+		} else if ((cachetype & (7 << 29)) == 4 << 29) {
 			/* ARMv7 register format */
 			arch = CPU_ARCH_ARMv7;
 			cacheid = CACHEID_VIPT_NONALIASING;
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8615216..7dd14e8 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -82,7 +82,7 @@ enum ipi_msg_type {
 
 static DECLARE_COMPLETION(cpu_running);
 
-static struct smp_operations smp_ops;
+static struct smp_operations smp_ops __ro_after_init;
 
 void __init smp_set_ops(const struct smp_operations *ops)
 {
@@ -748,19 +748,10 @@ core_initcall(register_cpufreq_notifier);
 
 static void raise_nmi(cpumask_t *mask)
 {
-	/*
-	 * Generate the backtrace directly if we are running in a calling
-	 * context that is not preemptible by the backtrace IPI. Note
-	 * that nmi_cpu_backtrace() automatically removes the current cpu
-	 * from mask.
-	 */
-	if (cpumask_test_cpu(smp_processor_id(), mask) && irqs_disabled())
-		nmi_cpu_backtrace(NULL);
-
 	smp_cross_call(mask, IPI_CPU_BACKTRACE);
 }
 
-void arch_trigger_all_cpu_backtrace(bool include_self)
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
 {
-	nmi_trigger_all_cpu_backtrace(include_self, raise_nmi);
+	nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_nmi);
 }
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 994e971..53cf86c 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/cache.h>
 #include <linux/elf.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -39,7 +40,7 @@
 static struct page **vdso_text_pagelist;
 
 /* Total number of pages needed for the data and text portions of the VDSO. */
-unsigned int vdso_total_pages __read_mostly;
+unsigned int vdso_total_pages __ro_after_init;
 
 /*
  * The VDSO data page.
@@ -47,13 +48,13 @@ unsigned int vdso_total_pages __read_mostly;
 static union vdso_data_store vdso_data_store __page_aligned_data;
 static struct vdso_data *vdso_data = &vdso_data_store.data;
 
-static struct page *vdso_data_page;
-static struct vm_special_mapping vdso_data_mapping = {
+static struct page *vdso_data_page __ro_after_init;
+static const struct vm_special_mapping vdso_data_mapping = {
 	.name = "[vvar]",
 	.pages = &vdso_data_page,
 };
 
-static struct vm_special_mapping vdso_text_mapping = {
+static struct vm_special_mapping vdso_text_mapping __ro_after_init = {
 	.name = "[vdso]",
 };
 
@@ -67,7 +68,7 @@ struct elfinfo {
 /* Cached result of boot-time check for whether the arch timer exists,
  * and if so, whether the virtual counter is useable.
  */
-static bool cntvct_ok __read_mostly;
+static bool cntvct_ok __ro_after_init;
 
 static bool __init cntvct_functional(void)
 {
@@ -270,7 +271,7 @@ static bool tk_is_cntvct(const struct timekeeper *tk)
 	if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
 		return false;
 
-	if (strcmp(tk->tkr_mono.clock->name, "arch_sys_counter") != 0)
+	if (!tk->tkr_mono.clock->archdata.vdso_direct)
 		return false;
 
 	return true;
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index cba1ec8..7fa487e 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -98,6 +98,7 @@ SECTIONS
 			IRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
+			CPUIDLE_TEXT
 			LOCK_TEXT
 			KPROBES_TEXT
 			*(.gnu.warning)
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index d24e5dd..f7f55df 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -111,6 +111,7 @@ SECTIONS
 			SOFTIRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
+			CPUIDLE_TEXT
 			LOCK_TEXT
 			HYPERVISOR_TEXT
 			KPROBES_TEXT
diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
index 10d77a6..f19842e 100644
--- a/arch/arm/kvm/Makefile
+++ b/arch/arm/kvm/Makefile
@@ -21,13 +21,16 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/
 obj-y += kvm-arm.o init.o interrupts.o
 obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
 obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
+obj-y += $(KVM)/arm/aarch32.o
 
 obj-y += $(KVM)/arm/vgic/vgic.o
 obj-y += $(KVM)/arm/vgic/vgic-init.o
 obj-y += $(KVM)/arm/vgic/vgic-irqfd.o
 obj-y += $(KVM)/arm/vgic/vgic-v2.o
+obj-y += $(KVM)/arm/vgic/vgic-v3.o
 obj-y += $(KVM)/arm/vgic/vgic-mmio.o
 obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o
+obj-y += $(KVM)/arm/vgic/vgic-mmio-v3.o
 obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o
 obj-y += $(KVM)/irqchip.o
 obj-y += $(KVM)/arm/arch_timer.o
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 75f130e..03e9273 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -144,6 +144,16 @@ out_fail_alloc:
 	return ret;
 }
 
+bool kvm_arch_has_vcpu_debugfs(void)
+{
+	return false;
+}
+
+int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+
 int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
 {
 	return VM_FAULT_SIGBUS;
@@ -158,8 +168,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;
 
-	kvm_free_stage2_pgd(kvm);
-
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);
@@ -1178,6 +1186,10 @@ static int init_common_resources(void)
 		return -ENOMEM;
 	}
 
+	/* set size of VMID supported by CPU */
+	kvm_vmid_bits = kvm_get_vmid_bits();
+	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
+
 	return 0;
 }
 
@@ -1243,10 +1255,6 @@ static void teardown_hyp_mode(void)
 
 static int init_vhe_mode(void)
 {
-	/* set size of VMID supported by CPU */
-	kvm_vmid_bits = kvm_get_vmid_bits();
-	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
-
 	kvm_info("VHE mode initialized successfully\n");
 	return 0;
 }
@@ -1330,10 +1338,6 @@ static int init_hyp_mode(void)
 		}
 	}
 
-	/* set size of VMID supported by CPU */
-	kvm_vmid_bits = kvm_get_vmid_bits();
-	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
-
 	kvm_info("Hyp mode initialized successfully\n");
 
 	return 0;
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index 1bb2b79..3e5e419 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -228,6 +228,35 @@ bool access_vm_reg(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static bool access_gic_sgi(struct kvm_vcpu *vcpu,
+			   const struct coproc_params *p,
+			   const struct coproc_reg *r)
+{
+	u64 reg;
+
+	if (!p->is_write)
+		return read_from_write_only(vcpu, p);
+
+	reg = (u64)*vcpu_reg(vcpu, p->Rt2) << 32;
+	reg |= *vcpu_reg(vcpu, p->Rt1) ;
+
+	vgic_v3_dispatch_sgi(vcpu, reg);
+
+	return true;
+}
+
+static bool access_gic_sre(struct kvm_vcpu *vcpu,
+			   const struct coproc_params *p,
+			   const struct coproc_reg *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+
+	return true;
+}
+
 /*
  * We could trap ID_DFR0 and tell the guest we don't support performance
  * monitoring.  Unfortunately the patch to make the kernel check ID_DFR0 was
@@ -361,10 +390,16 @@ static const struct coproc_reg cp15_regs[] = {
 	{ CRn(10), CRm( 3), Op1( 0), Op2( 1), is32,
 			access_vm_reg, reset_unknown, c10_AMAIR1},
 
+	/* ICC_SGI1R */
+	{ CRm64(12), Op1( 0), is64, access_gic_sgi},
+
 	/* VBAR: swapped by interrupt.S. */
 	{ CRn(12), CRm( 0), Op1( 0), Op2( 0), is32,
 			NULL, reset_val, c12_VBAR, 0x00000000 },
 
+	/* ICC_SRE */
+	{ CRn(12), CRm(12), Op1( 0), Op2(5), is32, access_gic_sre },
+
 	/* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */
 	{ CRn(13), CRm( 0), Op1( 0), Op2( 1), is32,
 			access_vm_reg, reset_val, c13_CID, 0x00000000 },
diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c
index af93e3f..0064b86 100644
--- a/arch/arm/kvm/emulate.c
+++ b/arch/arm/kvm/emulate.c
@@ -161,105 +161,6 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu)
 	}
 }
 
-/*
- * A conditional instruction is allowed to trap, even though it
- * wouldn't be executed.  So let's re-implement the hardware, in
- * software!
- */
-bool kvm_condition_valid(struct kvm_vcpu *vcpu)
-{
-	unsigned long cpsr, cond, insn;
-
-	/*
-	 * Exception Code 0 can only happen if we set HCR.TGE to 1, to
-	 * catch undefined instructions, and then we won't get past
-	 * the arm_exit_handlers test anyway.
-	 */
-	BUG_ON(!kvm_vcpu_trap_get_class(vcpu));
-
-	/* Top two bits non-zero?  Unconditional. */
-	if (kvm_vcpu_get_hsr(vcpu) >> 30)
-		return true;
-
-	cpsr = *vcpu_cpsr(vcpu);
-
-	/* Is condition field valid? */
-	if ((kvm_vcpu_get_hsr(vcpu) & HSR_CV) >> HSR_CV_SHIFT)
-		cond = (kvm_vcpu_get_hsr(vcpu) & HSR_COND) >> HSR_COND_SHIFT;
-	else {
-		/* This can happen in Thumb mode: examine IT state. */
-		unsigned long it;
-
-		it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3);
-
-		/* it == 0 => unconditional. */
-		if (it == 0)
-			return true;
-
-		/* The cond for this insn works out as the top 4 bits. */
-		cond = (it >> 4);
-	}
-
-	/* Shift makes it look like an ARM-mode instruction */
-	insn = cond << 28;
-	return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL;
-}
-
-/**
- * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block
- * @vcpu:	The VCPU pointer
- *
- * When exceptions occur while instructions are executed in Thumb IF-THEN
- * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have
- * to do this little bit of work manually. The fields map like this:
- *
- * IT[7:0] -> CPSR[26:25],CPSR[15:10]
- */
-static void kvm_adjust_itstate(struct kvm_vcpu *vcpu)
-{
-	unsigned long itbits, cond;
-	unsigned long cpsr = *vcpu_cpsr(vcpu);
-	bool is_arm = !(cpsr & PSR_T_BIT);
-
-	BUG_ON(is_arm && (cpsr & PSR_IT_MASK));
-
-	if (!(cpsr & PSR_IT_MASK))
-		return;
-
-	cond = (cpsr & 0xe000) >> 13;
-	itbits = (cpsr & 0x1c00) >> (10 - 2);
-	itbits |= (cpsr & (0x3 << 25)) >> 25;
-
-	/* Perform ITAdvance (see page A-52 in ARM DDI 0406C) */
-	if ((itbits & 0x7) == 0)
-		itbits = cond = 0;
-	else
-		itbits = (itbits << 1) & 0x1f;
-
-	cpsr &= ~PSR_IT_MASK;
-	cpsr |= cond << 13;
-	cpsr |= (itbits & 0x1c) << (10 - 2);
-	cpsr |= (itbits & 0x3) << 25;
-	*vcpu_cpsr(vcpu) = cpsr;
-}
-
-/**
- * kvm_skip_instr - skip a trapped instruction and proceed to the next
- * @vcpu: The vcpu pointer
- */
-void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr)
-{
-	bool is_thumb;
-
-	is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_T_BIT);
-	if (is_thumb && !is_wide_instr)
-		*vcpu_pc(vcpu) += 2;
-	else
-		*vcpu_pc(vcpu) += 4;
-	kvm_adjust_itstate(vcpu);
-}
-
-
 /******************************************************************************
  * Inject exceptions into the guest
  */
@@ -402,3 +303,15 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr)
 {
 	inject_abt(vcpu, true, addr);
 }
+
+/**
+ * kvm_inject_vabt - inject an async abort / SError into the guest
+ * @vcpu: The VCPU to receive the exception
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_vabt(struct kvm_vcpu *vcpu)
+{
+	vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) | HCR_VA);
+}
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index 3f1ef0d..4e40d19 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -28,14 +28,6 @@
 
 typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *);
 
-static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
-{
-	/* SVC called from Hyp mode should never get here */
-	kvm_debug("SVC called from Hyp mode shouldn't go here\n");
-	BUG();
-	return -EINVAL; /* Squash warning */
-}
-
 static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	int ret;
@@ -59,22 +51,6 @@ static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	return 1;
 }
 
-static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
-{
-	/* The hypervisor should never cause aborts */
-	kvm_err("Prefetch Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n",
-		kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu));
-	return -EFAULT;
-}
-
-static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run)
-{
-	/* This is either an error in the ws. code or an external abort */
-	kvm_err("Data Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n",
-		kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu));
-	return -EFAULT;
-}
-
 /**
  * kvm_handle_wfx - handle a WFI or WFE instructions trapped in guests
  * @vcpu:	the vcpu pointer
@@ -112,13 +88,10 @@ static exit_handle_fn arm_exit_handlers[] = {
 	[HSR_EC_CP14_64]	= kvm_handle_cp14_access,
 	[HSR_EC_CP_0_13]	= kvm_handle_cp_0_13_access,
 	[HSR_EC_CP10_ID]	= kvm_handle_cp10_id,
-	[HSR_EC_SVC_HYP]	= handle_svc_hyp,
 	[HSR_EC_HVC]		= handle_hvc,
 	[HSR_EC_SMC]		= handle_smc,
 	[HSR_EC_IABT]		= kvm_handle_guest_abort,
-	[HSR_EC_IABT_HYP]	= handle_pabt_hyp,
 	[HSR_EC_DABT]		= kvm_handle_guest_abort,
-	[HSR_EC_DABT_HYP]	= handle_dabt_hyp,
 };
 
 static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
@@ -144,6 +117,25 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 {
 	exit_handle_fn exit_handler;
 
+	if (ARM_ABORT_PENDING(exception_index)) {
+		u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu);
+
+		/*
+		 * HVC/SMC already have an adjusted PC, which we need
+		 * to correct in order to return to after having
+		 * injected the abort.
+		 */
+		if (hsr_ec == HSR_EC_HVC || hsr_ec == HSR_EC_SMC) {
+			u32 adj =  kvm_vcpu_trap_il_is32bit(vcpu) ? 4 : 2;
+			*vcpu_pc(vcpu) -= adj;
+		}
+
+		kvm_inject_vabt(vcpu);
+		return 1;
+	}
+
+	exception_index = ARM_EXCEPTION_CODE(exception_index);
+
 	switch (exception_index) {
 	case ARM_EXCEPTION_IRQ:
 		return 1;
@@ -160,6 +152,9 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		exit_handler = kvm_get_exit_handler(vcpu);
 
 		return exit_handler(vcpu, run);
+	case ARM_EXCEPTION_DATA_ABORT:
+		kvm_inject_vabt(vcpu);
+		return 1;
 	default:
 		kvm_pr_unimpl("Unsupported exception type: %d",
 			      exception_index);
diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile
index 8dfa5f7..3023bb5 100644
--- a/arch/arm/kvm/hyp/Makefile
+++ b/arch/arm/kvm/hyp/Makefile
@@ -5,6 +5,7 @@
 KVM=../../../../virt/kvm
 
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
 
 obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S
index 21c2388..60783f3 100644
--- a/arch/arm/kvm/hyp/entry.S
+++ b/arch/arm/kvm/hyp/entry.S
@@ -18,6 +18,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
 
 	.arch_extension     virt
 
@@ -63,6 +64,36 @@ ENTRY(__guest_exit)
 	ldr	lr, [r0, #4]
 
 	mov	r0, r1
+	mrs	r1, SPSR
+	mrs	r2, ELR_hyp
+	mrc	p15, 4, r3, c5, c2, 0	@ HSR
+
+	/*
+	 * Force loads and stores to complete before unmasking aborts
+	 * and forcing the delivery of the exception. This gives us a
+	 * single instruction window, which the handler will try to
+	 * match.
+	 */
+	dsb	sy
+	cpsie	a
+
+	.global	abort_guest_exit_start
+abort_guest_exit_start:
+
+	isb
+
+	.global	abort_guest_exit_end
+abort_guest_exit_end:
+
+	/*
+	 * If we took an abort, r0[31] will be set, and cmp will set
+	 * the N bit in PSTATE.
+	 */
+	cmp	r0, #0
+	msrmi	SPSR_cxsf, r1
+	msrmi	ELR_hyp, r2
+	mcrmi	p15, 4, r3, c5, c2, 0	@ HSR
+
 	bx	lr
 ENDPROC(__guest_exit)
 
diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S
index 7809138..96beb53 100644
--- a/arch/arm/kvm/hyp/hyp-entry.S
+++ b/arch/arm/kvm/hyp/hyp-entry.S
@@ -81,7 +81,6 @@ __kvm_hyp_vector:
 	invalid_vector	hyp_undef	ARM_EXCEPTION_UNDEFINED
 	invalid_vector	hyp_svc		ARM_EXCEPTION_SOFTWARE
 	invalid_vector	hyp_pabt	ARM_EXCEPTION_PREF_ABORT
-	invalid_vector	hyp_dabt	ARM_EXCEPTION_DATA_ABORT
 	invalid_vector	hyp_fiq		ARM_EXCEPTION_FIQ
 
 ENTRY(__hyp_do_panic)
@@ -164,6 +163,21 @@ hyp_irq:
 	load_vcpu r0			@ Load VCPU pointer to r0
 	b	__guest_exit
 
+hyp_dabt:
+	push	{r0, r1}
+	mrs	r0, ELR_hyp
+	ldr	r1, =abort_guest_exit_start
+THUMB(	add	r1, r1, #1)
+	cmp	r0, r1
+	ldrne	r1, =abort_guest_exit_end
+THUMB(	addne	r1, r1, #1)
+	cmpne	r0, r1
+	pop	{r0, r1}
+	bne	__hyp_panic
+
+	orr	r0, r0, #(1 << ARM_EXIT_WITH_ABORT_BIT)
+	eret
+
 	.ltorg
 
 	.popsection
diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c
index b13caa9..92678b7 100644
--- a/arch/arm/kvm/hyp/switch.c
+++ b/arch/arm/kvm/hyp/switch.c
@@ -14,6 +14,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+#include <linux/jump_label.h>
 
 #include <asm/kvm_asm.h>
 #include <asm/kvm_hyp.h>
@@ -54,6 +55,15 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
 {
 	u32 val;
 
+	/*
+	 * If we pended a virtual abort, preserve it until it gets
+	 * cleared. See B1.9.9 (Virtual Abort exception) for details,
+	 * but the crucial bit is the zeroing of HCR.VA in the
+	 * pseudocode.
+	 */
+	if (vcpu->arch.hcr & HCR_VA)
+		vcpu->arch.hcr = read_sysreg(HCR);
+
 	write_sysreg(0, HCR);
 	write_sysreg(0, HSTR);
 	val = read_sysreg(HDCR);
@@ -74,14 +84,21 @@ static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu)
 	write_sysreg(read_sysreg(MIDR), VPIDR);
 }
 
+
 static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu)
 {
-	__vgic_v2_save_state(vcpu);
+	if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		__vgic_v3_save_state(vcpu);
+	else
+		__vgic_v2_save_state(vcpu);
 }
 
 static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu)
 {
-	__vgic_v2_restore_state(vcpu);
+	if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		__vgic_v3_restore_state(vcpu);
+	else
+		__vgic_v2_restore_state(vcpu);
 }
 
 static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
@@ -134,7 +151,7 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
 	return true;
 }
 
-static int __hyp_text __guest_run(struct kvm_vcpu *vcpu)
+int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *host_ctxt;
 	struct kvm_cpu_context *guest_ctxt;
@@ -191,8 +208,6 @@ again:
 	return exit_code;
 }
 
-__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
-
 static const char * const __hyp_panic_string[] = {
 	[ARM_EXCEPTION_RESET]      = "\nHYP panic: RST   PC:%08x CPSR:%08x",
 	[ARM_EXCEPTION_UNDEFINED]  = "\nHYP panic: UNDEF PC:%08x CPSR:%08x",
diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c
index a263600..7296528 100644
--- a/arch/arm/kvm/hyp/tlb.c
+++ b/arch/arm/kvm/hyp/tlb.c
@@ -34,7 +34,7 @@
  * As v7 does not support flushing per IPA, just nuke the whole TLB
  * instead, ignoring the ipa value.
  */
-static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
+void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
 {
 	dsb(ishst);
 
@@ -50,21 +50,14 @@ static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
 	write_sysreg(0, VTTBR);
 }
 
-__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm);
-
-static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
+void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
-	__tlb_flush_vmid(kvm);
+	__kvm_tlb_flush_vmid(kvm);
 }
 
-__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm,
-							    phys_addr_t ipa);
-
-static void __hyp_text __tlb_flush_vm_context(void)
+void __hyp_text __kvm_flush_vm_context(void)
 {
 	write_sysreg(0, TLBIALLNSNHIS);
 	write_sysreg(0, ICIALLUIS);
 	dsb(ish);
 }
-
-__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void);
diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c
index 10f80a6..b6e715f 100644
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -126,12 +126,6 @@ static int decode_hsr(struct kvm_vcpu *vcpu, bool *is_write, int *len)
 	int access_size;
 	bool sign_extend;
 
-	if (kvm_vcpu_dabt_isextabt(vcpu)) {
-		/* cache operation on I/O addr, tell guest unsupported */
-		kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
-		return 1;
-	}
-
 	if (kvm_vcpu_dabt_iss1tw(vcpu)) {
 		/* page table accesses IO mem: tell guest to fix its TTBR */
 		kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 29d0b23..a5265ed 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -744,7 +744,6 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm)
 	if (!pgd)
 		return -ENOMEM;
 
-	kvm_clean_pgd(pgd);
 	kvm->arch.pgd = pgd;
 	return 0;
 }
@@ -936,7 +935,6 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
 		if (!cache)
 			return 0; /* ignore calls from kvm_set_spte_hva */
 		pte = mmu_memory_cache_alloc(cache);
-		kvm_clean_pte(pte);
 		pmd_populate_kernel(NULL, pmd, pte);
 		get_page(virt_to_page(pmd));
 	}
@@ -1434,6 +1432,11 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	int ret, idx;
 
 	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
+	if (unlikely(!is_iabt && kvm_vcpu_dabt_isextabt(vcpu))) {
+		kvm_inject_vabt(vcpu);
+		return 1;
+	}
+
 	fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
 
 	trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_hsr(vcpu),
@@ -1714,7 +1717,8 @@ int kvm_mmu_init(void)
 		 kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL));
 
 	if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) &&
-	    hyp_idmap_start <  kern_hyp_va(~0UL)) {
+	    hyp_idmap_start <  kern_hyp_va(~0UL) &&
+	    hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) {
 		/*
 		 * The idmap page is intersecting with the VA space,
 		 * it is not safe to continue further.
@@ -1893,6 +1897,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
 
 void kvm_arch_flush_shadow_all(struct kvm *kvm)
 {
+	kvm_free_stage2_pgd(kvm);
 }
 
 void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 8044591..2cef118 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -29,7 +29,7 @@
 /*
  * Default to the loop-based delay implementation.
  */
-struct arm_delay_ops arm_delay_ops = {
+struct arm_delay_ops arm_delay_ops __ro_after_init = {
 	.delay		= __loop_delay,
 	.const_udelay	= __loop_const_udelay,
 	.udelay		= __loop_udelay,
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5204395..841e924 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -55,7 +55,6 @@ config SOC_AT91RM9200
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
-	select MIGHT_HAVE_PCI
 	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 6c6d5e7..fe627cb 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -7,8 +7,6 @@ config ARCH_AXXIA
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA
 	help
 	  This enables support for the LSI Axxia devices.
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 34f0fca..a0e66d8 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -15,7 +15,6 @@ config ARCH_BCM_IPROC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GLOBAL_TIMER
-	select COMMON_CLK_IPROC
 	select CLKSRC_MMIO
 	select GPIOLIB
 	select ARM_AMBA
@@ -159,6 +158,20 @@ config ARCH_BCM2835
 	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
 	  This SoC is used in the Raspberry Pi and Roku 2 devices.
 
+config ARCH_BCM_53573
+	bool "Broadcom BCM53573 SoC series support"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  BCM53573 series is set of SoCs using ARM Cortex-A7 CPUs with wireless
+	  embedded in the chipset.
+	  This SoC line is mostly used in home routers and is some cheaper
+	  alternative for Northstar family.
+
+	  The base chip is BCM53573 and there are some packaging modifications
+	  like BCM47189 and BCM47452.
+
 config ARCH_BCM_63XX
 	bool "Broadcom BCM63xx DSL SoC"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 99a67cf..07e3a86 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -19,6 +19,22 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+u32 brcmstb_uart_config[3] = {
+	/* Debug UART initialization required */
+	1,
+	/* Debug UART physical address */
+	0,
+	/* Debug UART virtual address */
+	0,
+};
+
 static void __init brcmstb_init_irq(void)
 {
 	irqchip_init();
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-clps711x/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
deleted file mode 100644
index ba3d7d1..0000000
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/autcpu12.c
- *
- * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <asm/sizes.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices.h"
-
-/* NOR flash */
-#define AUTCPU12_FLASH_BASE	(CS0_PHYS_BASE)
-
-/* Board specific hardware definitions */
-#define AUTCPU12_CHAR_LCD_BASE	(CS1_PHYS_BASE + 0x00000000)
-#define AUTCPU12_CSAUX1_BASE	(CS1_PHYS_BASE + 0x04000000)
-#define AUTCPU12_CAN_BASE	(CS1_PHYS_BASE + 0x08000000)
-#define AUTCPU12_TOUCH_BASE	(CS1_PHYS_BASE + 0x0a000000)
-#define AUTCPU12_IO_BASE	(CS1_PHYS_BASE + 0x0c000000)
-#define AUTCPU12_LPT_BASE	(CS1_PHYS_BASE + 0x0e000000)
-
-/* NVRAM */
-#define AUTCPU12_NVRAM_BASE	(CS1_PHYS_BASE + 0x02000000)
-
-/* SmartMedia flash */
-#define AUTCPU12_SMC_BASE	(CS1_PHYS_BASE + 0x06000000)
-#define AUTCPU12_SMC_SEL_BASE	(AUTCPU12_SMC_BASE + 0x10)
-
-/* Ethernet */
-#define AUTCPU12_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define AUTCPU12_CS8900_IRQ	(IRQ_EINT3)
-
-/* NAND flash */
-#define AUTCPU12_MMGPIO_BASE	(CLPS711X_NR_GPIO)
-#define AUTCPU12_SMC_NCE	(AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */
-#define AUTCPU12_SMC_RDY	CLPS711X_GPIO(1, 2)
-#define AUTCPU12_SMC_ALE	CLPS711X_GPIO(1, 3)
-#define AUTCPU12_SMC_CLE	CLPS711X_GPIO(1, 4)
-
-/* LCD contrast digital potentiometer */
-#define AUTCPU12_DPOT_CS	CLPS711X_GPIO(4, 0)
-#define AUTCPU12_DPOT_CLK	CLPS711X_GPIO(4, 1)
-#define AUTCPU12_DPOT_UD	CLPS711X_GPIO(4, 2)
-
-static struct resource autcpu12_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ),
-};
-
-static struct resource autcpu12_nand_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16),
-};
-
-static struct mtd_partition autcpu12_nand_parts[] __initdata = {
-	{
-		.name	= "Flash partition 1",
-		.offset	= 0,
-		.size	= SZ_8M,
-	},
-	{
-		.name	= "Flash partition 2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata,
-					 size_t sz)
-{
-	switch (sz) {
-	case SZ_16M:
-	case SZ_32M:
-		break;
-	case SZ_64M:
-	case SZ_128M:
-		pdata->parts[0].size = SZ_16M;
-		break;
-	default:
-		pr_warn("Unsupported SmartMedia device size %u\n", sz);
-		break;
-	}
-}
-
-static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = {
-	.gpio_rdy	= AUTCPU12_SMC_RDY,
-	.gpio_nce	= AUTCPU12_SMC_NCE,
-	.gpio_ale	= AUTCPU12_SMC_ALE,
-	.gpio_cle	= AUTCPU12_SMC_CLE,
-	.gpio_nwp	= -1,
-	.chip_delay	= 20,
-	.parts		= autcpu12_nand_parts,
-	.num_parts	= ARRAY_SIZE(autcpu12_nand_parts),
-	.adjust_parts	= autcpu12_adjust_parts,
-};
-
-static struct platform_device autcpu12_nand_pdev __initdata = {
-	.name		= "gpio-nand",
-	.id		= -1,
-	.resource	= autcpu12_nand_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nand_resource),
-	.dev		= {
-		.platform_data = &autcpu12_nand_pdata,
-	},
-};
-
-static struct resource autcpu12_mmgpio_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"),
-};
-
-static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = {
-	.base	= AUTCPU12_MMGPIO_BASE,
-	.ngpio	= 8,
-};
-
-static struct platform_device autcpu12_mmgpio_pdev __initdata = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= autcpu12_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_mmgpio_resource),
-	.dev		= {
-		.platform_data = &autcpu12_mmgpio_pdata,
-	},
-};
-
-static const struct gpio const autcpu12_gpios[] __initconst = {
-	{ AUTCPU12_DPOT_CS,	GPIOF_OUT_INIT_HIGH,	"DPOT CS" },
-	{ AUTCPU12_DPOT_CLK,	GPIOF_OUT_INIT_LOW,	"DPOT CLK" },
-	{ AUTCPU12_DPOT_UD,	GPIOF_OUT_INIT_LOW,	"DPOT UD" },
-};
-
-static struct mtd_partition autcpu12_flash_partitions[] = {
-	{
-		.name	= "NOR.0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data autcpu12_flash_pdata = {
-	.width		= 4,
-	.parts		= autcpu12_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(autcpu12_flash_partitions),
-};
-
-static struct resource autcpu12_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M),
-};
-
-static struct platform_device autcpu12_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= autcpu12_flash_resources,
-	.num_resources	= ARRAY_SIZE(autcpu12_flash_resources),
-	.dev		= {
-		.platform_data	= &autcpu12_flash_pdata,
-	},
-};
-
-static struct resource autcpu12_nvram_resource[] __initdata = {
-	DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0),
-};
-
-static struct platdata_mtd_ram autcpu12_nvram_pdata = {
-	.bankwidth	= 4,
-};
-
-static struct platform_device autcpu12_nvram_pdev __initdata = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= autcpu12_nvram_resource,
-	.num_resources	= ARRAY_SIZE(autcpu12_nvram_resource),
-	.dev		= {
-		.platform_data	= &autcpu12_nvram_pdata,
-	},
-};
-
-static void __init autcpu12_nvram_init(void)
-{
-	void __iomem *nvram;
-	unsigned int save[2];
-	resource_size_t nvram_size = SZ_128K;
-
-	/*
-	 * Check for 32K/128K
-	 * Read ofs 0K
-	 * Read ofs 64K
-	 * Write complement to ofs 64K
-	 * Read and check result on ofs 0K
-	 * Restore contents
-	 */
-	nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K);
-	if (nvram) {
-		save[0] = readl(nvram + 0);
-		save[1] = readl(nvram + SZ_64K);
-		writel(~save[0], nvram + SZ_64K);
-		if (readl(nvram + 0) != save[0]) {
-			writel(save[0], nvram + 0);
-			nvram_size = SZ_32K;
-		} else
-			writel(save[1], nvram + SZ_64K);
-		iounmap(nvram);
-
-		autcpu12_nvram_resource[0].end =
-			autcpu12_nvram_resource[0].start + nvram_size - 1;
-		platform_device_register(&autcpu12_nvram_pdev);
-	} else
-		pr_err("Failed to remap NVRAM resource\n");
-}
-
-static void __init autcpu12_init(void)
-{
-	clps711x_devices_init();
-	platform_device_register(&autcpu12_flash_pdev);
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource,
-					ARRAY_SIZE(autcpu12_cs8900_resource));
-	platform_device_register(&autcpu12_mmgpio_pdev);
-	autcpu12_nvram_init();
-}
-
-static void __init autcpu12_init_late(void)
-{
-	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
-	platform_device_register(&autcpu12_nand_pdev);
-}
-
-MACHINE_START(AUTCPU12, "autronix autcpu12")
-	/* Maintainer: Thomas Gleixner */
-	.atag_offset	= 0x20000,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= autcpu12_init,
-	.init_late	= autcpu12_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
deleted file mode 100644
index 972abdb..0000000
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/cdb89712.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define CDB89712_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define CDB89712_CS8900_IRQ	(IRQ_EINT3)
-
-static struct resource cdb89712_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(CDB89712_CS8900_IRQ),
-};
-
-static struct mtd_partition cdb89712_flash_partitions[] __initdata = {
-	{
-		.name	= "Flash",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cdb89712_flash_pdata __initdata = {
-	.width		= 4,
-	.probe_type	= "map_rom",
-	.parts		= cdb89712_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(cdb89712_flash_partitions),
-};
-
-static struct resource cdb89712_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M),
-};
-
-static struct platform_device cdb89712_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= cdb89712_flash_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_flash_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_flash_pdata,
-	},
-};
-
-static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = {
-	{
-		.name	= "BootROM",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = {
-	.width		= 4,
-	.probe_type	= "map_rom",
-	.parts		= cdb89712_bootrom_partitions,
-	.nr_parts	= ARRAY_SIZE(cdb89712_bootrom_partitions),
-};
-
-static struct resource cdb89712_bootrom_resources[] __initdata = {
-	DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM |
-			 IORESOURCE_READONLY),
-};
-
-static struct platform_device cdb89712_bootrom_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.resource	= cdb89712_bootrom_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_bootrom_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_bootrom_pdata,
-	},
-};
-
-static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = {
-	.bankwidth	= 4,
-};
-
-static struct resource cdb89712_sram_resources[] __initdata = {
-	DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE),
-};
-
-static struct platform_device cdb89712_sram_pdev __initdata = {
-	.name		= "mtd-ram",
-	.id		= 0,
-	.resource	= cdb89712_sram_resources,
-	.num_resources	= ARRAY_SIZE(cdb89712_sram_resources),
-	.dev	= {
-		.platform_data	= &cdb89712_sram_pdata,
-	},
-};
-
-static void __init cdb89712_init(void)
-{
-	clps711x_devices_init();
-	platform_device_register(&cdb89712_flash_pdev);
-	platform_device_register(&cdb89712_bootrom_pdev);
-	platform_device_register(&cdb89712_sram_pdev);
-	platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource,
-					ARRAY_SIZE(cdb89712_cs8900_resource));
-}
-
-MACHINE_START(CDB89712, "Cirrus-CDB89712")
-	/* Maintainer: Ray Lehtiniemi */
-	.atag_offset	= 0x100,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= cdb89712_init,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
deleted file mode 100644
index f9ca22b..0000000
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/clep7312.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/memblock.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices.h"
-
-static void __init
-fixup_clep7312(struct tag *tags, char **cmdline)
-{
-	memblock_add(0xc0000000, 0x01000000);
-}
-
-MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
-	/* Maintainer: Nobody */
-	.atag_offset	= 0x0100,
-	.fixup		= fixup_clep7312,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= clps711x_devices_init,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
deleted file mode 100644
index f339797..0000000
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *  Copyright (C) 2000, 2001 Blue Mug, Inc.  All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/memblock.h>
-#include <linux/types.h>
-#include <linux/i2c-gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/memblock.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define VIDEORAM_SIZE		SZ_128K
-
-#define EDB7211_LCD_DC_DC_EN	CLPS711X_GPIO(3, 1)
-#define EDB7211_LCDEN		CLPS711X_GPIO(3, 2)
-#define EDB7211_LCDBL		CLPS711X_GPIO(3, 3)
-
-#define EDB7211_I2C_SDA		CLPS711X_GPIO(3, 4)
-#define EDB7211_I2C_SCL		CLPS711X_GPIO(3, 5)
-
-#define EDB7211_FLASH0_BASE	(CS0_PHYS_BASE)
-#define EDB7211_FLASH1_BASE	(CS1_PHYS_BASE)
-
-#define EDB7211_CS8900_BASE	(CS2_PHYS_BASE + 0x300)
-#define EDB7211_CS8900_IRQ	(IRQ_EINT3)
-
-/* The extra 8 lines of the keyboard matrix */
-#define EDB7211_EXTKBD_BASE	(CS3_PHYS_BASE)
-
-static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = {
-	.sda_pin	= EDB7211_I2C_SDA,
-	.scl_pin	= EDB7211_I2C_SCL,
-	.scl_is_output_only = 1,
-};
-
-static struct resource edb7211_cs8900_resource[] __initdata = {
-	DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K),
-	DEFINE_RES_IRQ(EDB7211_CS8900_IRQ),
-};
-
-static struct mtd_partition edb7211_flash_partitions[] __initdata = {
-	{
-		.name	= "Flash",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data edb7211_flash_pdata __initdata = {
-	.width		= 4,
-	.parts		= edb7211_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(edb7211_flash_partitions),
-};
-
-static struct resource edb7211_flash_resources[] __initdata = {
-	DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M),
-	DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M),
-};
-
-static struct platform_device edb7211_flash_pdev __initdata = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= edb7211_flash_resources,
-	.num_resources	= ARRAY_SIZE(edb7211_flash_resources),
-	.dev	= {
-		.platform_data	= &edb7211_flash_pdata,
-	},
-};
-
-static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power) {
-		gpio_set_value(EDB7211_LCDEN, 1);
-		udelay(100);
-		gpio_set_value(EDB7211_LCD_DC_DC_EN, 1);
-	} else {
-		gpio_set_value(EDB7211_LCD_DC_DC_EN, 0);
-		udelay(100);
-		gpio_set_value(EDB7211_LCDEN, 0);
-	}
-}
-
-static struct plat_lcd_data edb7211_lcd_power_pdata = {
-	.set_power	= edb7211_lcd_power_set,
-};
-
-static struct pwm_lookup edb7211_pwm_lookup[] = {
-	PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL,
-		   0, PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data pwm_bl_pdata = {
-	.dft_brightness	= 0x01,
-	.max_brightness	= 0x0f,
-	.enable_gpio	= EDB7211_LCDBL,
-};
-
-static struct resource clps711x_pwm_res =
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4);
-
-static struct gpio edb7211_gpios[] __initconst = {
-	{ EDB7211_LCD_DC_DC_EN,	GPIOF_OUT_INIT_LOW,	"LCD DC-DC" },
-	{ EDB7211_LCDEN,	GPIOF_OUT_INIT_LOW,	"LCD POWER" },
-};
-
-/* Reserve screen memory region at the start of main system memory. */
-static void __init edb7211_reserve(void)
-{
-	memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE);
-}
-
-static void __init
-fixup_edb7211(struct tag *tags, char **cmdline)
-{
-	/*
-	 * Bank start addresses are not present in the information
-	 * passed in from the boot loader.  We could potentially
-	 * detect them, but instead we hard-code them.
-	 *
-	 * Banks sizes _are_ present in the param block, but we're
-	 * not using that information yet.
-	 */
-	memblock_add(0xc0000000, SZ_8M);
-	memblock_add(0xc1000000, SZ_8M);
-}
-
-static void __init edb7211_init_late(void)
-{
-	gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios));
-
-	platform_device_register(&edb7211_flash_pdev);
-
-	platform_device_register_data(NULL, "platform-lcd", 0,
-				      &edb7211_lcd_power_pdata,
-				      sizeof(edb7211_lcd_power_pdata));
-
-	platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE,
-					&clps711x_pwm_res, 1);
-	pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup));
-
-	platform_device_register_data(&platform_bus, "pwm-backlight", 0,
-				      &pwm_bl_pdata, sizeof(pwm_bl_pdata));
-
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource,
-					ARRAY_SIZE(edb7211_cs8900_resource));
-	platform_device_register_data(NULL, "i2c-gpio", 0,
-				      &edb7211_i2c_pdata,
-				      sizeof(edb7211_i2c_pdata));
-}
-
-MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
-	/* Maintainer: Jon McClintock */
-	.atag_offset	= VIDEORAM_SIZE + 0x100,
-	.fixup		= fixup_edb7211,
-	.reserve	= edb7211_reserve,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= clps711x_devices_init,
-	.init_late	= edb7211_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
deleted file mode 100644
index 80a16a8..0000000
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/p720t.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-#include <linux/sizes.h>
-#include <linux/backlight.h>
-#include <linux/gpio/driver.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand-gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <video/platform_lcd.h>
-
-#include "common.h"
-#include "devices.h"
-
-#define P720T_USERLED		CLPS711X_GPIO(3, 0)
-#define P720T_NAND_CLE		CLPS711X_GPIO(4, 0)
-#define P720T_NAND_ALE		CLPS711X_GPIO(4, 1)
-#define P720T_NAND_NCE		CLPS711X_GPIO(4, 2)
-
-#define P720T_NAND_BASE		(CLPS711X_SDRAM1_BASE)
-
-#define P720T_MMGPIO_BASE	(CLPS711X_NR_GPIO)
-
-#define SYSPLD_PHYS_BASE	IOMEM(CS1_PHYS_BASE)
-
-#define PLD_INT			(SYSPLD_PHYS_BASE + 0x000000)
-#define PLD_INT_MMGPIO_BASE	(P720T_MMGPIO_BASE + 0)
-#define PLD_INT_PENIRQ		(PLD_INT_MMGPIO_BASE + 5)
-#define PLD_INT_UCB_IRQ		(PLD_INT_MMGPIO_BASE + 1)
-#define PLD_INT_KBD_ATN		(PLD_INT_MMGPIO_BASE + 0) /* EINT1 */
-
-#define PLD_PWR			(SYSPLD_PHYS_BASE + 0x000004)
-#define PLD_PWR_MMGPIO_BASE	(P720T_MMGPIO_BASE + 8)
-#define PLD_PWR_EXT		(PLD_PWR_MMGPIO_BASE + 5)
-#define PLD_PWR_MODE		(PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */
-#define PLD_S4_ON		(PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */
-#define PLD_S3_ON		(PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */
-#define PLD_S2_ON		(PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */
-#define PLD_S1_ON		(PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */
-
-#define PLD_KBD			(SYSPLD_PHYS_BASE + 0x000008)
-#define PLD_KBD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 16)
-#define PLD_KBD_WAKE		(PLD_KBD_MMGPIO_BASE + 1)
-#define PLD_KBD_EN		(PLD_KBD_MMGPIO_BASE + 0)
-
-#define PLD_SPI			(SYSPLD_PHYS_BASE + 0x00000c)
-#define PLD_SPI_MMGPIO_BASE	(P720T_MMGPIO_BASE + 24)
-#define PLD_SPI_EN		(PLD_SPI_MMGPIO_BASE + 0)
-
-#define PLD_IO			(SYSPLD_PHYS_BASE + 0x000010)
-#define PLD_IO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 32)
-#define PLD_IO_BOOTSEL		(PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */
-#define PLD_IO_USER		(PLD_IO_MMGPIO_BASE + 5) /* User defined switch */
-#define PLD_IO_LED3		(PLD_IO_MMGPIO_BASE + 4)
-#define PLD_IO_LED2		(PLD_IO_MMGPIO_BASE + 3)
-#define PLD_IO_LED1		(PLD_IO_MMGPIO_BASE + 2)
-#define PLD_IO_LED0		(PLD_IO_MMGPIO_BASE + 1)
-#define PLD_IO_LEDEN		(PLD_IO_MMGPIO_BASE + 0)
-
-#define PLD_IRDA		(SYSPLD_PHYS_BASE + 0x000014)
-#define PLD_IRDA_MMGPIO_BASE	(P720T_MMGPIO_BASE + 40)
-#define PLD_IRDA_EN		(PLD_IRDA_MMGPIO_BASE + 0)
-
-#define PLD_COM2		(SYSPLD_PHYS_BASE + 0x000018)
-#define PLD_COM2_MMGPIO_BASE	(P720T_MMGPIO_BASE + 48)
-#define PLD_COM2_EN		(PLD_COM2_MMGPIO_BASE + 0)
-
-#define PLD_COM1		(SYSPLD_PHYS_BASE + 0x00001c)
-#define PLD_COM1_MMGPIO_BASE	(P720T_MMGPIO_BASE + 56)
-#define PLD_COM1_EN		(PLD_COM1_MMGPIO_BASE + 0)
-
-#define PLD_AUD			(SYSPLD_PHYS_BASE + 0x000020)
-#define PLD_AUD_MMGPIO_BASE	(P720T_MMGPIO_BASE + 64)
-#define PLD_AUD_DIV1		(PLD_AUD_MMGPIO_BASE + 6)
-#define PLD_AUD_DIV0		(PLD_AUD_MMGPIO_BASE + 5)
-#define PLD_AUD_CLK_SEL1	(PLD_AUD_MMGPIO_BASE + 4)
-#define PLD_AUD_CLK_SEL0	(PLD_AUD_MMGPIO_BASE + 3)
-#define PLD_AUD_MIC_PWR		(PLD_AUD_MMGPIO_BASE + 2)
-#define PLD_AUD_MIC_GAIN	(PLD_AUD_MMGPIO_BASE + 1)
-#define PLD_AUD_CODEC_EN	(PLD_AUD_MMGPIO_BASE + 0)
-
-#define PLD_CF			(SYSPLD_PHYS_BASE + 0x000024)
-#define PLD_CF_MMGPIO_BASE	(P720T_MMGPIO_BASE + 72)
-#define PLD_CF2_SLEEP		(PLD_CF_MMGPIO_BASE + 5)
-#define PLD_CF1_SLEEP		(PLD_CF_MMGPIO_BASE + 4)
-#define PLD_CF2_nPDREQ		(PLD_CF_MMGPIO_BASE + 3)
-#define PLD_CF1_nPDREQ		(PLD_CF_MMGPIO_BASE + 2)
-#define PLD_CF2_nIRQ		(PLD_CF_MMGPIO_BASE + 1)
-#define PLD_CF1_nIRQ		(PLD_CF_MMGPIO_BASE + 0)
-
-#define PLD_SDC			(SYSPLD_PHYS_BASE + 0x000028)
-#define PLD_SDC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 80)
-#define PLD_SDC_INT_EN		(PLD_SDC_MMGPIO_BASE + 2)
-#define PLD_SDC_WP		(PLD_SDC_MMGPIO_BASE + 1)
-#define PLD_SDC_CD		(PLD_SDC_MMGPIO_BASE + 0)
-
-#define PLD_CODEC		(SYSPLD_PHYS_BASE + 0x400000)
-#define PLD_CODEC_MMGPIO_BASE	(P720T_MMGPIO_BASE + 88)
-#define PLD_CODEC_IRQ3		(PLD_CODEC_MMGPIO_BASE + 4)
-#define PLD_CODEC_IRQ2		(PLD_CODEC_MMGPIO_BASE + 3)
-#define PLD_CODEC_IRQ1		(PLD_CODEC_MMGPIO_BASE + 2)
-#define PLD_CODEC_EN		(PLD_CODEC_MMGPIO_BASE + 0)
-
-#define PLD_BRITE		(SYSPLD_PHYS_BASE + 0x400004)
-#define PLD_BRITE_MMGPIO_BASE	(P720T_MMGPIO_BASE + 96)
-#define PLD_BRITE_UP		(PLD_BRITE_MMGPIO_BASE + 1)
-#define PLD_BRITE_DN		(PLD_BRITE_MMGPIO_BASE + 0)
-
-#define PLD_LCDEN		(SYSPLD_PHYS_BASE + 0x400008)
-#define PLD_LCDEN_MMGPIO_BASE	(P720T_MMGPIO_BASE + 104)
-#define PLD_LCDEN_EN		(PLD_LCDEN_MMGPIO_BASE + 0)
-
-#define PLD_TCH			(SYSPLD_PHYS_BASE + 0x400010)
-#define PLD_TCH_MMGPIO_BASE	(P720T_MMGPIO_BASE + 112)
-#define PLD_TCH_PENIRQ		(PLD_TCH_MMGPIO_BASE + 1)
-#define PLD_TCH_EN		(PLD_TCH_MMGPIO_BASE + 0)
-
-#define PLD_GPIO		(SYSPLD_PHYS_BASE + 0x400014)
-#define PLD_GPIO_MMGPIO_BASE	(P720T_MMGPIO_BASE + 120)
-#define PLD_GPIO2		(PLD_GPIO_MMGPIO_BASE + 2)
-#define PLD_GPIO1		(PLD_GPIO_MMGPIO_BASE + 1)
-#define PLD_GPIO0		(PLD_GPIO_MMGPIO_BASE + 0)
-
-static struct gpio p720t_gpios[] __initconst = {
-	{ PLD_S1_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S1_ON" },
-	{ PLD_S2_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S2_ON" },
-	{ PLD_S3_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S3_ON" },
-	{ PLD_S4_ON,	GPIOF_OUT_INIT_LOW,	"PLD_S4_ON" },
-	{ PLD_KBD_EN,	GPIOF_OUT_INIT_LOW,	"PLD_KBD_EN" },
-	{ PLD_SPI_EN,	GPIOF_OUT_INIT_LOW,	"PLD_SPI_EN" },
-	{ PLD_IO_USER,	GPIOF_OUT_INIT_LOW,	"PLD_IO_USER" },
-	{ PLD_IO_LED0,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED0" },
-	{ PLD_IO_LED1,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED1" },
-	{ PLD_IO_LED2,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED2" },
-	{ PLD_IO_LED3,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LED3" },
-	{ PLD_IO_LEDEN,	GPIOF_OUT_INIT_LOW,	"PLD_IO_LEDEN" },
-	{ PLD_IRDA_EN,	GPIOF_OUT_INIT_LOW,	"PLD_IRDA_EN" },
-	{ PLD_COM1_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM1_EN" },
-	{ PLD_COM2_EN,	GPIOF_OUT_INIT_HIGH,	"PLD_COM2_EN" },
-	{ PLD_CODEC_EN,	GPIOF_OUT_INIT_LOW,	"PLD_CODEC_EN" },
-	{ PLD_LCDEN_EN,	GPIOF_OUT_INIT_LOW,	"PLD_LCDEN_EN" },
-	{ PLD_TCH_EN,	GPIOF_OUT_INIT_LOW,	"PLD_TCH_EN" },
-	{ P720T_USERLED,GPIOF_OUT_INIT_LOW,	"USER_LED" },
-};
-
-static struct resource p720t_mmgpio_resource[] __initdata = {
-	DEFINE_RES_MEM_NAMED(0, 4, "dat"),
-};
-
-static struct bgpio_pdata p720t_mmgpio_pdata = {
-	.ngpio	= 8,
-};
-
-static struct platform_device p720t_mmgpio __initdata = {
-	.name		= "basic-mmio-gpio",
-	.id		= -1,
-	.resource	= p720t_mmgpio_resource,
-	.num_resources	= ARRAY_SIZE(p720t_mmgpio_resource),
-	.dev		= {
-		.platform_data	= &p720t_mmgpio_pdata,
-	},
-};
-
-static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase)
-{
-	p720t_mmgpio_resource[0].start = (unsigned long)addrbase;
-	p720t_mmgpio_pdata.base = gpiobase;
-
-	platform_device_register(&p720t_mmgpio);
-}
-
-static struct {
-	void __iomem	*addrbase;
-	int		gpiobase;
-} mmgpios[] __initconst = {
-	{ PLD_INT,	PLD_INT_MMGPIO_BASE },
-	{ PLD_PWR,	PLD_PWR_MMGPIO_BASE },
-	{ PLD_KBD,	PLD_KBD_MMGPIO_BASE },
-	{ PLD_SPI,	PLD_SPI_MMGPIO_BASE },
-	{ PLD_IO,	PLD_IO_MMGPIO_BASE },
-	{ PLD_IRDA,	PLD_IRDA_MMGPIO_BASE },
-	{ PLD_COM2,	PLD_COM2_MMGPIO_BASE },
-	{ PLD_COM1,	PLD_COM1_MMGPIO_BASE },
-	{ PLD_AUD,	PLD_AUD_MMGPIO_BASE },
-	{ PLD_CF,	PLD_CF_MMGPIO_BASE },
-	{ PLD_SDC,	PLD_SDC_MMGPIO_BASE },
-	{ PLD_CODEC,	PLD_CODEC_MMGPIO_BASE },
-	{ PLD_BRITE,	PLD_BRITE_MMGPIO_BASE },
-	{ PLD_LCDEN,	PLD_LCDEN_MMGPIO_BASE },
-	{ PLD_TCH,	PLD_TCH_MMGPIO_BASE },
-	{ PLD_GPIO,	PLD_GPIO_MMGPIO_BASE },
-};
-
-static struct resource p720t_nand_resource[] __initdata = {
-	DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4),
-};
-
-static struct mtd_partition p720t_nand_parts[] __initdata = {
-	{
-		.name	= "Flash partition 1",
-		.offset	= 0,
-		.size	= SZ_2M,
-	},
-	{
-		.name	= "Flash partition 2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct gpio_nand_platdata p720t_nand_pdata __initdata = {
-	.gpio_rdy	= -1,
-	.gpio_nce	= P720T_NAND_NCE,
-	.gpio_ale	= P720T_NAND_ALE,
-	.gpio_cle	= P720T_NAND_CLE,
-	.gpio_nwp	= -1,
-	.chip_delay	= 15,
-	.parts		= p720t_nand_parts,
-	.num_parts	= ARRAY_SIZE(p720t_nand_parts),
-};
-
-static struct platform_device p720t_nand_pdev __initdata = {
-	.name		= "gpio-nand",
-	.id		= -1,
-	.resource	= p720t_nand_resource,
-	.num_resources	= ARRAY_SIZE(p720t_nand_resource),
-	.dev		= {
-		.platform_data = &p720t_nand_pdata,
-	},
-};
-
-static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power) {
-		gpio_set_value(PLD_LCDEN_EN, 1);
-		gpio_set_value(PLD_S1_ON, 1);
-		gpio_set_value(PLD_S2_ON, 1);
-		gpio_set_value(PLD_S4_ON, 1);
-	} else {
-		gpio_set_value(PLD_S1_ON, 0);
-		gpio_set_value(PLD_S2_ON, 0);
-		gpio_set_value(PLD_S4_ON, 0);
-		gpio_set_value(PLD_LCDEN_EN, 0);
-	}
-}
-
-static struct plat_lcd_data p720t_lcd_power_pdata = {
-	.set_power	= p720t_lcd_power_set,
-};
-
-static void p720t_lcd_backlight_set_intensity(int intensity)
-{
-	gpio_set_value(PLD_S3_ON, intensity);
-}
-
-static struct generic_bl_info p720t_lcd_backlight_pdata = {
-	.name			= "lcd-backlight.0",
-	.default_intensity	= 0x01,
-	.max_intensity		= 0x01,
-	.set_bl_intensity	= p720t_lcd_backlight_set_intensity,
-};
-
-static void __init
-fixup_p720t(struct tag *tag, char **cmdline)
-{
-	/*
-	 * Our bootloader doesn't setup any tags (yet).
-	 */
-	if (tag->hdr.tag != ATAG_CORE) {
-		tag->hdr.tag = ATAG_CORE;
-		tag->hdr.size = tag_size(tag_core);
-		tag->u.core.flags = 0;
-		tag->u.core.pagesize = PAGE_SIZE;
-		tag->u.core.rootdev = 0x0100;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_MEM;
-		tag->hdr.size = tag_size(tag_mem32);
-		tag->u.mem.size = 4096;
-		tag->u.mem.start = PHYS_OFFSET;
-
-		tag = tag_next(tag);
-		tag->hdr.tag = ATAG_NONE;
-		tag->hdr.size = 0;
-	}
-}
-
-static struct gpio_led p720t_gpio_leds[] = {
-	{
-		.name			= "User LED",
-		.default_trigger	= "heartbeat",
-		.gpio			= P720T_USERLED,
-	},
-};
-
-static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = {
-	.leds		= p720t_gpio_leds,
-	.num_leds	= ARRAY_SIZE(p720t_gpio_leds),
-};
-
-static void __init p720t_init(void)
-{
-	int i;
-
-	clps711x_devices_init();
-
-	for (i = 0; i < ARRAY_SIZE(mmgpios); i++)
-		p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase);
-
-	platform_device_register(&p720t_nand_pdev);
-}
-
-static void __init p720t_init_late(void)
-{
-	WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios)));
-
-	platform_device_register_data(NULL, "platform-lcd", 0,
-				      &p720t_lcd_power_pdata,
-				      sizeof(p720t_lcd_power_pdata));
-	platform_device_register_data(NULL, "generic-bl", 0,
-				      &p720t_lcd_backlight_pdata,
-				      sizeof(p720t_lcd_backlight_pdata));
-	platform_device_register_simple("video-clps711x", 0, NULL, 0);
-	platform_device_register_data(NULL, "leds-gpio", 0,
-				      &p720t_gpio_led_pdata,
-				      sizeof(p720t_gpio_led_pdata));
-}
-
-MACHINE_START(P720T, "ARM-Prospector720T")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= fixup_p720t,
-	.map_io		= clps711x_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.init_machine	= p720t_init,
-	.init_late	= p720t_init_late,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
deleted file mode 100644
index 6466da8..0000000
--- a/arch/arm/mach-clps711x/common.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/core.c
- *
- *  Core support for the CLPS711x-based machines.
- *
- *  Copyright (C) 2001,2011 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/map.h>
-#include <asm/system_misc.h>
-
-#include <mach/hardware.h>
-
-#include "common.h"
-
-/*
- * This maps the generic CLPS711x registers
- */
-static struct map_desc clps711x_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)CLPS711X_VIRT_BASE,
-		.pfn		= __phys_to_pfn(CLPS711X_PHYS_BASE),
-		.length		= 48 * SZ_1K,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init clps711x_map_io(void)
-{
-	iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
-}
-
-void __init clps711x_init_irq(void)
-{
-	clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K);
-}
-
-void __init clps711x_timer_init(void)
-{
-	clps711x_clk_init(CLPS711X_VIRT_BASE);
-	clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D,
-			     CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI);
-}
-
-void clps711x_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
deleted file mode 100644
index 370200b..0000000
--- a/arch/arm/mach-clps711x/common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-clps711x/common.h
- *
- * Common bits.
- */
-
-#include <linux/reboot.h>
-
-#define CLPS711X_NR_GPIO	(4 * 8 + 3)
-#define CLPS711X_GPIO(prt, bit)	((prt) * 8 + (bit))
-
-extern void clps711x_map_io(void);
-extern void clps711x_init_irq(void);
-extern void clps711x_timer_init(void);
-extern void clps711x_restart(enum reboot_mode mode, const char *cmd);
-
-/* drivers/irqchip/irq-clps711x.c */
-void clps711x_intc_init(phys_addr_t, resource_size_t);
-/* drivers/clk/clk-clps711x.c */
-void clps711x_clk_init(void __iomem *base);
-/* drivers/clocksource/clps711x-timer.c */
-void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base,
-			  unsigned int irq);
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
deleted file mode 100644
index 77a9617..0000000
--- a/arch/arm/mach-clps711x/devices.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  CLPS711X common devices definitions
- *
- *  Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/io.h>
-#include <linux/of_fdt.h>
-#include <linux/platform_device.h>
-#include <linux/random.h>
-#include <linux/sizes.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-
-#include <asm/system_info.h>
-
-#include <mach/hardware.h>
-
-static const struct resource clps711x_cpuidle_res __initconst =
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128);
-
-static void __init clps711x_add_cpuidle(void)
-{
-	platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE,
-					&clps711x_cpuidle_res, 1);
-}
-
-static const phys_addr_t clps711x_gpios[][2] __initconst = {
-	{ PADR, PADDR },
-	{ PBDR, PBDDR },
-	{ PCDR, PCDDR },
-	{ PDDR, PDDDR },
-	{ PEDR, PEDDR },
-};
-
-static void __init clps711x_add_gpio(void)
-{
-	unsigned i;
-	struct resource gpio_res[2];
-
-	memset(gpio_res, 0, sizeof(gpio_res));
-
-	gpio_res[0].flags = IORESOURCE_MEM;
-	gpio_res[1].flags = IORESOURCE_MEM;
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) {
-		gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0];
-		gpio_res[0].end = gpio_res[0].start;
-		gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1];
-		gpio_res[1].end = gpio_res[1].start;
-
-		platform_device_register_simple("clps711x-gpio", i,
-						gpio_res, ARRAY_SIZE(gpio_res));
-	}
-}
-
-const struct resource clps711x_syscon_res[] __initconst = {
-	/* SYSCON1, SYSFLG1 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128),
-	/* SYSCON2, SYSFLG2 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128),
-	/* SYSCON3 */
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64),
-};
-
-static void __init clps711x_add_syscon(void)
-{
-	unsigned i;
-
-	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
-		platform_device_register_simple("syscon", i + 1,
-						&clps711x_syscon_res[i], 1);
-}
-
-static const struct resource clps711x_uart1_res[] __initconst = {
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR1, SZ_128),
-	DEFINE_RES_IRQ(IRQ_UTXINT1),
-	DEFINE_RES_IRQ(IRQ_URXINT1),
-};
-
-static const struct resource clps711x_uart2_res[] __initconst = {
-	DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR2, SZ_128),
-	DEFINE_RES_IRQ(IRQ_UTXINT2),
-	DEFINE_RES_IRQ(IRQ_URXINT2),
-};
-
-static void __init clps711x_add_uart(void)
-{
-	platform_device_register_simple("clps711x-uart", 0, clps711x_uart1_res,
-					ARRAY_SIZE(clps711x_uart1_res));
-	platform_device_register_simple("clps711x-uart", 1, clps711x_uart2_res,
-					ARRAY_SIZE(clps711x_uart2_res));
-};
-
-static void __init clps711x_soc_init(void)
-{
-	struct soc_device_attribute *soc_dev_attr;
-	struct soc_device *soc_dev;
-	void __iomem *base;
-	u32 id[5];
-
-	base = ioremap(CLPS711X_PHYS_BASE, SZ_32K);
-	if (!base)
-		return;
-
-	id[0] = readl(base + UNIQID);
-	id[1] = readl(base + RANDID0);
-	id[2] = readl(base + RANDID1);
-	id[3] = readl(base + RANDID2);
-	id[4] = readl(base + RANDID3);
-	system_rev = SYSFLG1_VERID(readl(base + SYSFLG1));
-
-	add_device_randomness(id, sizeof(id));
-
-	system_serial_low = id[0];
-
-	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
-	if (!soc_dev_attr)
-		goto out_unmap;
-
-	soc_dev_attr->machine = of_flat_dt_get_machine_name();
-	soc_dev_attr->family = "Cirrus Logic CLPS711X";
-	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev);
-	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]);
-
-	soc_dev = soc_device_register(soc_dev_attr);
-	if (IS_ERR(soc_dev)) {
-		kfree(soc_dev_attr->revision);
-		kfree(soc_dev_attr->soc_id);
-		kfree(soc_dev_attr);
-	}
-
-out_unmap:
-	iounmap(base);
-}
-
-void __init clps711x_devices_init(void)
-{
-	clps711x_add_cpuidle();
-	clps711x_add_gpio();
-	clps711x_add_syscon();
-	clps711x_add_uart();
-	clps711x_soc_init();
-}
diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h
deleted file mode 100644
index a5efc17..0000000
--- a/arch/arm/mach-clps711x/devices.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- *  CLPS711X common devices definitions
- *
- *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-void clps711x_devices_init(void);
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index eb14a0f..5fd836b 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -2,7 +2,6 @@ menuconfig ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
 	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 0d046ac..ed3d0e9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -501,6 +501,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("da8xx_lcdc.0",	"fck",		&lcdc_clk),
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
+	CLK("ti-aemif",		NULL,		&aemif_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
 	CLK(NULL,		"usb11",	&usb11_clk),
 	CLK(NULL,		"usb20",	&usb20_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 754f478..c9f7e92 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -37,6 +37,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
 		       NULL),
 	OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
+	OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
 	{}
 };
 
@@ -49,6 +50,7 @@ static void __init da850_init_machine(void)
 
 static const char *const da850_boards_compat[] __initconst = {
 	"enbw,cmc",
+	"ti,da850-lcdk",
 	"ti,da850-evm",
 	"ti,da850",
 	NULL,
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f820de..0bb63b8 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -12,6 +12,7 @@ menuconfig ARCH_EXYNOS
 	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
@@ -126,8 +127,6 @@ config SOC_EXYNOS5440
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select PINCTRL_EXYNOS5440
 	select PM_OPP
 	help
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index acabf0b..757fc11 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -30,25 +30,10 @@
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
 		.length		= SZ_8K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC1),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c48ba4f..5fb0040 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -18,11 +18,6 @@
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
-#define EXYNOS4_PA_CMU			0x10030000
-
-#define EXYNOS4_PA_DMC0			0x10400000
-#define EXYNOS4_PA_DMC1			0x10410000
-
 #define EXYNOS4_PA_COREPERI		0x10500000
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3750575..06332f6 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 		return -ENOMEM;
 	}
 
+	/*
+	 * Clear the OF_POPULATED flag set in of_irq_init so that
+	 * later the Exynos PMU platform device won't be skipped.
+	 */
+	of_node_clear_flag(node, OF_POPULATED);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index 02f6d7a..20d5ad7 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -59,7 +59,7 @@
 #define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
 #define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
 
-#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)	/* CSR_ROMBASEMASK */
 
 
 /* PIC irq control */
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ee9a318..9155b63 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -64,13 +64,6 @@ config IMX_HAVE_IOMUX_V1
 config ARCH_MXC_IOMUX_V3
 	bool
 
-config SOC_IMX1
-	bool
-	select CPU_ARM920T
-	select IMX_HAVE_IOMUX_V1
-	select MXC_AVIC
-	select PINCTRL_IMX1
-
 config SOC_IMX21
 	bool
 	select CPU_ARM926T
@@ -88,7 +81,6 @@ config SOC_IMX31
 	bool
 	select CPU_V6
 	select MXC_AVIC
-	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -96,35 +88,6 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select MXC_AVIC
 	select PINCTRL_IMX35
-	select SMP_ON_UP if SMP
-
-if ARCH_MULTI_V4T
-
-comment "MX1 platforms:"
-
-config MACH_SCB9328
-	bool "Synertronixx scb9328"
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Y here if you are using a Synertronixx scb9328 board
-
-config MACH_APF9328
-	bool "APF9328"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX1
-	help
-	  Say Yes here if you are using the Armadeus APF9328 development board
-
-config MACH_IMX1_DT
-	bool "Support i.MX1 platforms from device tree"
-	select SOC_IMX1
-	help
-	  Include support for Freescale i.MX1 based platforms
-	  using the device tree for discovery.
-
-endif
 
 if ARCH_MULTI_V5
 
@@ -461,6 +424,18 @@ endif
 
 comment "Device tree only"
 
+if ARCH_MULTI_V4T
+
+config SOC_IMX1
+	bool "i.MX1 support"
+	select CPU_ARM920T
+	select MXC_AVIC
+	select PINCTRL_IMX1
+	help
+	  This enables support for Freescale i.MX1 processor
+
+endif
+
 if ARCH_MULTI_V5
 
 config SOC_IMX25
@@ -523,7 +498,6 @@ config SOC_IMX6Q
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
-	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6
 
@@ -569,7 +543,6 @@ config SOC_LS1021A
 	bool "Freescale LS1021A support"
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select PCI_DOMAINS if PCI
 	select ZONE_DMA if ARM_LPAE
 	help
 	  This enables support for Freescale LS1021A processor.
@@ -585,7 +558,6 @@ config SOC_VF610
 	select ARM_GIC if ARCH_MULTI_V7
 	select PINCTRL_VF610
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select SMP_ON_UP if SMP
 
 	help
 	  This enables support for Freescale Vybrid VF610 processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9f5fffd..cab1289 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,6 +1,5 @@
 obj-y := cpu.o system.o irq-common.o
 
-obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
 
 obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
@@ -28,6 +27,7 @@ obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC
@@ -35,11 +35,6 @@ obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o
 endif
 
-# i.MX1 based machines
-obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
-obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
-
 # i.MX21 based machines
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
@@ -93,6 +88,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
+obj-$(CONFIG_SOC_IMX1) += mach-imx1.o
 obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index a8f4693..c4436d9 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -21,29 +21,24 @@ struct device_node;
 enum mxc_cpu_pwr_mode;
 struct of_device_id;
 
-void mx1_map_io(void);
 void mx21_map_io(void);
 void mx27_map_io(void);
 void mx31_map_io(void);
 void mx35_map_io(void);
-void imx1_init_early(void);
 void imx21_init_early(void);
 void imx27_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
 void mxc_init_irq(void __iomem *);
-void mx1_init_irq(void);
 void mx21_init_irq(void);
 void mx27_init_irq(void);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
-void imx1_soc_init(void);
 void imx21_soc_init(void);
 void imx27_soc_init(void);
 void imx31_soc_init(void);
 void imx35_soc_init(void);
 void epit_timer_init(void __iomem *base, int irq);
-int mx1_clocks_init(unsigned long fref);
 int mx21_clocks_init(unsigned long lref, unsigned long fref);
 int mx27_clocks_init(unsigned long fref);
 int mx31_clocks_init(unsigned long fref);
@@ -109,7 +104,7 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_int_mem_clk_lpm(bool enable);
+void imx6_set_int_mem_clk_lpm(bool enable);
 void imx6sl_set_wait_clk(bool enter);
 int imx_mmdc_get_ddr_type(void);
 
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index db0f48c..bfeb25a 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -85,7 +85,7 @@ EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused);
 int __init imx6q_cpuidle_init(void)
 {
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
-	imx6q_set_int_mem_clk_lpm(true);
+	imx6_set_int_mem_clk_lpm(true);
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }
diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c
index 3c6672b..c5a5c3a 100644
--- a/arch/arm/mach-imx/cpuidle-imx6sx.c
+++ b/arch/arm/mach-imx/cpuidle-imx6sx.c
@@ -9,6 +9,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/module.h>
+#include <asm/cacheflush.h>
 #include <asm/cpuidle.h>
 #include <asm/suspend.h>
 
@@ -17,6 +18,15 @@
 
 static int imx6sx_idle_finish(unsigned long val)
 {
+	/*
+	 * for Cortex-A7 which has an internal L2
+	 * cache, need to flush it before powering
+	 * down ARM platform, since flushing L1 cache
+	 * here again has very small overhead, compared
+	 * to adding conditional code for L2 cache type,
+	 * just call flush_cache_all() is fine.
+	 */
+	flush_cache_all();
 	cpu_do_idle();
 
 	return 0;
@@ -90,6 +100,7 @@ static struct cpuidle_driver imx6sx_cpuidle_driver = {
 
 int __init imx6sx_cpuidle_init(void)
 {
+	imx6_set_int_mem_clk_lpm(true);
 	imx6_enable_rbc(false);
 	/*
 	 * set ARM power up/down timing to the fastest,
diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h
deleted file mode 100644
index f9b5afc..0000000
--- a/arch/arm/mach-imx/devices-imx1.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_fb_data imx1_imx_fb_data;
-#define imx1_add_imx_fb(pdata) \
-    imx_add_imx_fb(&imx1_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx1_imx_i2c_data;
-#define imx1_add_imx_i2c(pdata)		\
-	imx_add_imx_i2c(&imx1_imx_i2c_data, pdata)
-
-extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[];
-#define imx1_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata)
-#define imx1_add_imx_uart0(pdata)	imx1_add_imx_uart(0, pdata)
-#define imx1_add_imx_uart1(pdata)	imx1_add_imx_uart(1, pdata)
-
-extern const struct imx_spi_imx_data imx1_cspi_data[];
-#define imx1_add_cspi(id, pdata)   \
-	imx_add_spi_imx(&imx1_cspi_data[id], pdata)
-
-#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata)
-#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata)
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index e5cf587..aa6cee8 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 09cebd8..6920e35 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -154,18 +154,6 @@ struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_ssi_platform_data *pdata);
 
 #include <linux/platform_data/serial-imx.h>
-struct imx_imx_uart_3irq_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irqrx;
-	resource_size_t irqtx;
-	resource_size_t irqrts;
-};
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata);
-
 struct imx_imx_uart_1irq_data {
 	int id;
 	resource_size_t iobase;
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 7df6328..aa00272 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -19,11 +19,6 @@
 		.irq = soc ## _INT_LCDC,				\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_fb_data imx1_imx_fb_data __initconst =
-	imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
 	imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index ae97915..9822bed 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -21,11 +21,6 @@
 #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size)		\
 	[_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst =
-	imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
 	imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 6962cff..e3c89e9 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -27,15 +27,6 @@
 		.irq = soc ## _INT_UART ## _hwid,			\
 	}
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = {
-#define imx1_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0)
-	imx1_imx_uart_data_entry(0, 1),
-	imx1_imx_uart_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX1 */
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
 #define imx21_imx_uart_data_entry(_id, _hwid)				\
@@ -82,34 +73,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-struct platform_device *__init imx_add_imx_uart_3irq(
-		const struct imx_imx_uart_3irq_data *data,
-		const struct imxuart_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqrx,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqtx,
-			.end = data->irqtx,
-			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = data->irqrts,
-			.end = data->irqrx,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("imx1-uart", data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
-
 struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata)
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index 5e9707b..d93c446 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -21,15 +21,6 @@
 #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size)	\
 	[id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size)
 
-#ifdef CONFIG_SOC_IMX1
-const struct imx_spi_imx_data imx1_cspi_data[] __initconst = {
-#define imx1_cspi_data_entry(_id, _hwid) \
-	imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K)
-	imx1_cspi_data_entry(0, 1),
-	imx1_cspi_data_entry(1, 2),
-};
-#endif
-
 #ifdef CONFIG_SOC_IMX21
 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 #define imx21_cspi_data_entry(_id, _hwid)                            \
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index d737f95..90e10cb 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -112,7 +112,6 @@
 #include "mx2x.h"
 #include "mx21.h"
 #include "mx27.h"
-#include "mx1.h"
 
 #define imx_map_entry(soc, name, _type)	{				\
 	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
@@ -121,7 +120,7 @@
 	.type = _type,							\
 }
 
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* There's an off-by-one between the gpio bank number and the gpiochip */
 /* range e.g. GPIO_1_5 is gpio 5 under linux */
 #define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
 
diff --git a/arch/arm/mach-imx/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h
deleted file mode 100644
index 95f4681..0000000
--- a/arch/arm/mach-imx/iomux-mx1.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#ifndef __MACH_IOMUX_MX1_H__
-#define __MACH_IOMUX_MX1_H__
-
-#include "iomux-v1.h"
-
-#define PA0_AIN_SPI2_CLK	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC	(GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD	(GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN		(GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK		(GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0		(GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1		(GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2		(GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3		(GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4		(GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5		(GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6		(GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7		(GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC	(GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC	(GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK	(GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL		(GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4	(GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS	(GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5	(GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6	(GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7	(GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0		(GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4		(GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5		(GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16		(GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0	(GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17		(GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1	(GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18		(GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2	(GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19		(GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3	(GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20		(GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0	(GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21		(GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1	(GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22		(GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2	(GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23		(GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK	(GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO		(GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1		(GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI	(GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3		(GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO		(GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK		(GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0	(GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD		(GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS		(GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS	(GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK	(GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT	(GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT	(GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS	(GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK	(GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE	(GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE		(GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV	(GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND	(GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP		(GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM		(GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO	(GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO	(GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS	(GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD	(GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD	(GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS		(GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK	(GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT	(GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS		(GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK	(GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS	(GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD	(GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD	(GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY	(GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK	(GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS		(GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO	(GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI	(GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS	(GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX	(GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX	(GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV		(GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR	(GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK	(GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS		(GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS		(GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS		(GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI		(GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD	(GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR	(GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD	(GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC	(GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15		(GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT		(GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD	(GPIO_PORTD | GPIO_BIN | 31)
-
-#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h
index 2e4a0dd..368667b 100644
--- a/arch/arm/mach-imx/iomux-mx3.h
+++ b/arch/arm/mach-imx/iomux-mx3.h
@@ -598,10 +598,7 @@ enum iomux_pins {
 #define MX31_PIN_CONTRAST__CONTRAST	IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_SPL__D3_SPL		IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_D3_CLS__D3_CLS		IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_LCS0__GPI03_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_1__GPIO          IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_I2C_CLK__SCL		IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
@@ -665,37 +662,6 @@ enum iomux_pins {
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
-#define MX31_PIN_ATA_CS0__GPIO3_26	IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_CS1__GPIO3_27	IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_PC_PWRON__SD2_DATA3	IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_VS1__SD2_DATA2	IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_READY__SD2_DATA1	IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_WAIT_B__SD2_DATA0	IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD2_B__SD2_CLK	IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_PC_CD1_B__SD2_CMD	IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_ATA_DIOR__GPIO3_28	IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_ATA_DIOW__GPIO3_29	IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D7__CSI_D7		IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D8__CSI_D8		IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D9__CSI_D9		IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D10__CSI_D10	IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D11__CSI_D11	IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D12__CSI_D12	IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D13__CSI_D13	IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D14__CSI_D14	IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_D15__CSI_D15	IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_HSYNC__CSI_HSYNC	IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_MCLK__CSI_MCLK	IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK	IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSI_VSYNC__CSI_VSYNC	IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
deleted file mode 100644
index ebbb5ab..0000000
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int apf9328_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &apf9328_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
-	.flags          = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
-	{
-		.start  = MX1_CS4_PHYS + 0x00C00000,
-		.end    = MX1_CS4_PHYS + 0x00C00001,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CS4_PHYS + 0x00C00002,
-		.end    = MX1_CS4_PHYS + 0x00C00003,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		/* irq number is run-time assigned */
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &dm9000_setup,
-	}
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&apf9328_flash_device,
-	&dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(apf9328_pins,
-			ARRAY_SIZE(apf9328_pins),
-			"APF9328");
-
-	imx1_add_imx_uart0(NULL);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	imx1_add_imx_i2c(&apf9328_i2c_data);
-
-	dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
-	mx1_clocks_init(32768);
-}
-
-MACHINE_START(APF9328, "Armadeus APF9328")
-	/* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
-	.map_io       = mx1_map_io,
-	.init_early   = imx1_init_early,
-	.init_irq     = mx1_init_irq,
-	.init_time	= apf9328_timer_init,
-	.init_machine = apf9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index eaee47a..17a97ba 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -493,24 +493,12 @@ static void __init armadillo5x0_init(void)
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
-	armadillo5x0_smc911x_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
-	armadillo5x0_smc911x_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx_add_gpio_keys(&armadillo5x0_button_data);
 	imx31_add_imx_i2c1(NULL);
 
 	/* Register UART */
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_imx_uart1(&uart_pdata);
 
-	/* SMSC9118 IRQ pin */
-	gpio_direction_input(MX31_PIN_GPIO1_0);
-
-	/* Register SDHC */
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
-
 	/* Register FB */
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
@@ -527,21 +515,39 @@ static void __init armadillo5x0_init(void)
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
 		   mx3_ccm_base + MXC_CCM_RCSR);
+}
+
+static void __init armadillo5x0_late(void)
+{
+	armadillo5x0_smc911x_resources[1].start =
+		gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+	armadillo5x0_smc911x_resources[1].end =
+		gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	imx_add_gpio_keys(&armadillo5x0_button_data);
+
+	/* SMSC9118 IRQ pin */
+	gpio_direction_input(MX31_PIN_GPIO1_0);
+
+	/* Register SDHC */
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* RTC */
 	/* Get RTC IRQ and register the chip */
-	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
-		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
-			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+	if (!gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc")) {
+		if (!gpio_direction_input(ARMADILLO5X0_RTC_GPIO))
+			armadillo5x0_i2c_rtc.irq =
+				gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
 		else
 			gpio_free(ARMADILLO5X0_RTC_GPIO);
 	}
+
 	if (armadillo5x0_i2c_rtc.irq == 0)
 		pr_warn("armadillo5x0_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 
 	/* USB */
-
 	usbotg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT);
 	if (usbotg_pdata.otg)
@@ -565,5 +571,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.init_irq = mx31_init_irq,
 	.init_time	= armadillo5x0_timer_init,
 	.init_machine = armadillo5x0_init,
+	.init_late	= armadillo5x0_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c
index 6f915b0..de5ab8d 100644
--- a/arch/arm/mach-imx/imx1-dt.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -9,8 +9,27 @@
 
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
 #include "common.h"
+#include "hardware.h"
+
+#define MX1_AVIC_ADDR	0x00223000
+
+static void __init imx1_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX1);
+}
+
+static void __init imx1_init_irq(void)
+{
+	void __iomem *avic_addr;
+
+	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
+	WARN_ON(!avic_addr);
+
+	mxc_init_irq(avic_addr);
+}
 
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
@@ -18,9 +37,9 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
-	.map_io		= mx1_map_io,
+	.map_io		= debug_ll_io_init,
 	.init_early	= imx1_init_early,
-	.init_irq	= mx1_init_irq,
+	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index ede2bdb..dd75a47 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -540,7 +540,6 @@ static void __init visstrim_m10_revision(void)
 static void __init visstrim_m10_board_init(void)
 {
 	int ret;
-	int mo_version;
 
 	imx27_soc_init();
 	visstrim_m10_revision();
@@ -550,11 +549,6 @@ static void __init visstrim_m10_board_init(void)
 	if (ret)
 		pr_err("Failed to setup pins (%d)\n", ret);
 
-	ret = gpio_request_array(visstrim_m10_gpios,
-				ARRAY_SIZE(visstrim_m10_gpios));
-	if (ret)
-		pr_err("Failed to request gpios (%d)\n", ret);
-
 	imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 	imx27_add_imx_uart0(&uart_pdata);
 
@@ -566,12 +560,26 @@ static void __init visstrim_m10_board_init(void)
 	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
-	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init visstrim_m10_late_init(void)
+{
+	int mo_version, ret;
+
+	ret = gpio_request_array(visstrim_m10_gpios,
+				 ARRAY_SIZE(visstrim_m10_gpios));
+	if (ret)
+		pr_err("Failed to request gpios (%d)\n", ret);
+
+	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
+
 	imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
 				sizeof(snd_mx27vis_pdata));
 	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
 				      &iclink_tvp5150, sizeof(iclink_tvp5150));
+
 	gpio_led_register_device(0, &visstrim_m10_led_data);
 
 	/* Use mother board version to decide what video devices we shall use */
@@ -591,6 +599,7 @@ static void __init visstrim_m10_board_init(void)
 		visstrim_deinterlace_init();
 		visstrim_analog_camera_init();
 	}
+
 	visstrim_coda_init();
 }
 
@@ -607,5 +616,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.init_irq = mx27_init_irq,
 	.init_time	= visstrim_m10_timer_init,
 	.init_machine = visstrim_m10_board_init,
+	.init_late	= visstrim_m10_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 5d9bfab..58a2b88 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -16,6 +16,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6ul_enet_clk_init(void)
 {
@@ -64,6 +65,7 @@ static void __init imx6ul_init_machine(void)
 	if (parent == NULL)
 		pr_warn("failed to initialize soc device\n");
 
+	of_platform_default_populate(NULL, NULL, parent);
 	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
@@ -79,6 +81,8 @@ static void __init imx6ul_init_irq(void)
 
 static void __init imx6ul_init_late(void)
 {
+	imx6sx_cpuidle_init();
+
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 31df436..ab847e2 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -63,7 +63,7 @@
  */
 #define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
@@ -141,7 +141,7 @@ static inline int kzm_init_ext_uart(void)
 /*
  * SMSC LAN9118
  */
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 static struct smsc911x_platform_config kzm_smsc9118_config = {
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
@@ -201,7 +201,7 @@ static inline int kzm_init_smsc9118(void)
 }
 #endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_IMX)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -245,13 +245,17 @@ static void __init kzm_board_init(void)
 
 	mxc_iomux_setup_multiple_pins(kzm_pins,
 				      ARRAY_SIZE(kzm_pins), "kzm");
-	kzm_init_ext_uart();
-	kzm_init_smsc9118();
 	kzm_init_imx_uart();
 
 	pr_info("Clock input source is 26MHz\n");
 }
 
+static void __init kzm_late_init(void)
+{
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+}
+
 /*
  * This structure defines static mappings for the kzm-arm11-01 board.
  */
@@ -291,5 +295,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.init_irq = mx31_init_irq,
 	.init_time	= kzm_timer_init,
 	.init_machine = kzm_board_init,
+	.init_late	= kzm_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 9986f9a..5e36682 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -302,12 +302,16 @@ static void __init mx21ads_board_init(void)
 	imx21_add_imx_uart0(&uart_pdata_rts);
 	imx21_add_imx_uart2(&uart_pdata_norts);
 	imx21_add_imx_uart3(&uart_pdata_rts);
-	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
 	imx21_add_imx_fb(&mx21ads_fb_data);
+}
+
+static void __init mx21ads_late_init(void)
+{
+	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	mx21ads_cs8900_resources[1].start =
 			gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
@@ -328,6 +332,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
 	.init_time	= mx21ads_timer_init,
-	.init_machine = mx21ads_board_init,
+	.init_machine	= mx21ads_board_init,
+	.init_late	= mx21ads_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 9ef4640..7ba651a 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
-	int ret;
 	imx27_soc_init();
 
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
-	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
 	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_imx2_wdt();
+
+	imx27_add_spi_imx1(&spi2_pdata);
+	imx27_add_spi_imx0(&spi1_pdata);
+
+	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+}
+
+static void __init mx27pdk_late_init(void)
+{
+	int ret;
+
+	mx27_3ds_sdhc1_enable_level_translator();
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+
 	otg_phy_init();
 
 	if (otg_mode_host) {
@@ -509,17 +524,12 @@ static void __init mx27pdk_init(void)
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
 	mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
 	spi_register_board_info(mx27_3ds_spi_devs,
-						ARRAY_SIZE(mx27_3ds_spi_devs));
+				ARRAY_SIZE(mx27_3ds_spi_devs));
 
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx27_add_imx_fb(&mx27_3ds_fb_data);
 
 	ret = gpio_request_array(mx27_3ds_camera_gpios,
 				 ARRAY_SIZE(mx27_3ds_camera_gpios));
@@ -529,7 +539,6 @@ static void __init mx27pdk_init(void)
 	}
 
 	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
-	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
@@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27pdk_timer_init,
 	.init_machine = mx27pdk_init,
+	.init_late	= mx27pdk_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a4c389e..a04bb09 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -352,14 +352,20 @@ static void __init mx27ads_board_init(void)
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
 	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
-	mx27ads_regulator_init();
 	imx27_add_imx_fb(&mx27ads_fb_data);
+
+	imx27_add_fec(NULL);
+	imx27_add_mxc_w1();
+}
+
+static void __init mx27ads_late_init(void)
+{
+	mx27ads_regulator_init();
+
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_mxc_mmc(1, &sdhc2_pdata);
 
-	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_mxc_w1();
 }
 
 static void __init mx27ads_timer_init(void)
@@ -395,5 +401,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27ads_timer_init,
 	.init_machine = mx27ads_board_init,
+	.init_late	= mx27ads_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 65a0dc0..12b8a52 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -694,8 +694,6 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init mx31_3ds_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
 	/* Configure SPI1 IOMUX */
@@ -708,14 +706,31 @@ static void __init mx31_3ds_init(void)
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
 	imx31_add_spi_imx1(&spi1_pdata);
+
+	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
+
+	imx31_add_imx2_wdt();
+	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
+
+	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_ipu_core();
+	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
+
+	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
+}
+
+static void __init mx31_3ds_late(void)
+{
+	int ret;
+
 	mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(mx31_3ds_spi_devs,
-						ARRAY_SIZE(mx31_3ds_spi_devs));
+				ARRAY_SIZE(mx31_3ds_spi_devs));
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
-
 	mx31_3ds_usbotg_init();
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
@@ -733,14 +748,9 @@ static void __init mx31_3ds_init(void)
 
 	if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
 		printk(KERN_WARNING "Init of the debug board failed, all "
-				    "devices on the debug board are unusable.\n");
-	imx31_add_imx2_wdt();
-	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
-	imx31_add_mxc_mmc(0, &sdhc1_pdata);
+		       "devices on the debug board are unusable.\n");
 
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_ipu_core();
-	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	/* CSI */
 	/* Camera power: default - off */
@@ -752,10 +762,6 @@ static void __init mx31_3ds_init(void)
 	}
 
 	mx31_3ds_init_camera();
-
-	imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
-
-	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
 
 static void __init mx31_3ds_timer_init(void)
@@ -778,6 +784,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31_3ds_timer_init,
 	.init_machine = mx31_3ds_init,
+	.init_late	= mx31_3ds_late,
 	.reserve = mx31_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 4f2c56d..766b8b9 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -554,20 +554,19 @@ static void __init mx31ads_map_io(void)
 	iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
 }
 
-static void __init mx31ads_init_irq(void)
-{
-	mx31_init_irq();
-	mx31ads_init_expio();
-}
-
 static void __init mx31ads_init(void)
 {
 	imx31_soc_init();
 
-	mxc_init_extuart();
 	mxc_init_imx_uart();
-	mxc_init_i2c();
 	mxc_init_audio();
+}
+
+static void __init mx31ads_late(void)
+{
+	mx31ads_init_expio();
+	mxc_init_extuart();
+	mxc_init_i2c();
 	mxc_init_ext_ethernet();
 }
 
@@ -581,8 +580,9 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.atag_offset = 0x100,
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
-	.init_irq = mx31ads_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_time	= mx31ads_timer_init,
 	.init_machine = mx31ads_init,
+	.init_late	= mx31ads_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index e9549a3..6fd4636 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -56,6 +56,26 @@
  * appropriate baseboard support code.
  */
 
+static unsigned int mx31lilly_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_CSPI3_MOSI__RXD3,
+	MX31_PIN_CSPI3_MISO__TXD3,
+	MX31_PIN_CSPI3_SCLK__RTS3,
+	MX31_PIN_CSPI3_SPI_RDY__CTS3,
+};
+
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
 /* SMSC ethernet support */
 
 static struct resource smsc91x_resources[] = {
@@ -252,16 +272,12 @@ static void __init mx31lilly_board_init(void)
 {
 	imx31_soc_init();
 
-	switch (mx31lilly_baseboard) {
-	case MX31LILLY_NOBOARD:
-		break;
-	case MX31LILLY_DB:
-		mx31lilly_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
-			mx31lilly_baseboard);
-	}
+	mxc_iomux_setup_multiple_pins(mx31lilly_pins,
+				      ARRAY_SIZE(mx31lilly_pins), "mx31lily");
+
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_imx_uart1(&uart_pdata);
+	imx31_add_imx_uart2(&uart_pdata);
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
 
@@ -284,10 +300,17 @@ static void __init mx31lilly_board_init(void)
 
 	imx31_add_spi_imx0(&spi0_pdata);
 	imx31_add_spi_imx1(&spi1_pdata);
-	mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
-	spi_register_board_info(&mc13783_dev, 1);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lilly_late_init(void)
+{
+	if (mx31lilly_baseboard == MX31LILLY_DB)
+		mx31lilly_db_init();
+
+	mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(&mc13783_dev, 1);
 
 	smsc91x_resources[1].start =
 			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0));
@@ -310,6 +333,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31lilly_timer_init,
-	.init_machine = mx31lilly_board_init,
+	.init_machine	= mx31lilly_board_init,
+	.init_late	= mx31lilly_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4822a17..f033a57 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -52,6 +52,19 @@
  */
 
 static unsigned int mx31lite_pins[] = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
 	/* SPI 1 */
@@ -64,6 +77,23 @@ static unsigned int mx31lite_pins[] = {
 	MX31_PIN_CSPI2_SS2__SS2,
 };
 
+/* UART */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* SPI */
+static int spi0_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static const struct spi_imx_master spi0_pdata __initconst = {
+	.chipselect	= spi0_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi0_internal_chipselect),
+};
+
 static const struct mxc_nand_platform_data
 mx31lite_nand_board_info __initconst  = {
 	.width = 1,
@@ -103,13 +133,13 @@ static struct platform_device smsc911x_device = {
  * The MC13783 is the only hard-wired SPI device on the module.
  */
 
-static int spi_internal_chipselect[] = {
+static int spi1_internal_chipselect[] = {
 	MXC_SPI_CS(0),
 };
 
 static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
 };
 
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
@@ -200,8 +230,6 @@ static struct platform_device physmap_flash_device = {
 	.num_resources = 1,
 };
 
-
-
 /*
  * This structure defines the MX31 memory map.
  */
@@ -233,29 +261,30 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 
 static void __init mx31lite_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
-	switch (mx31lite_baseboard) {
-	case MX31LITE_NOBOARD:
-		break;
-	case MX31LITE_DB:
-		mx31lite_db_init();
-		break;
-	default:
-		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
-				mx31lite_baseboard);
-	}
-
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
+	imx31_add_imx_uart0(&uart_pdata);
+	imx31_add_spi_imx0(&spi0_pdata);
+
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
 	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
 	imx31_add_spi_imx1(&spi1_pdata);
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+}
+
+static void __init mx31lite_late(void)
+{
+	int ret;
+
+	if (mx31lite_baseboard == MX31LITE_DB)
+		mx31lite_db_init();
+
 	mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
@@ -265,8 +294,6 @@ static void __init mx31lite_init(void)
 	if (usbh2_pdata.otg)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -294,5 +321,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31lite_timer_init,
 	.init_machine = mx31lite_init,
+	.init_late	= mx31lite_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 4f2d998..cc86768 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -526,11 +526,9 @@ static void __init mx31moboard_init(void)
 		"moboard");
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gpio_led_register_device(-1, &mx31moboard_led_pdata);
 
 	imx31_add_imx2_wdt();
 
-	moboard_uart0_init();
 	imx31_add_imx_uart0(&uart0_pdata);
 	imx31_add_imx_uart4(&uart4_pdata);
 
@@ -540,6 +538,19 @@ static void __init mx31moboard_init(void)
 	imx31_add_spi_imx1(&moboard_spi1_pdata);
 	imx31_add_spi_imx2(&moboard_spi2_pdata);
 
+	mx31moboard_init_cam();
+
+	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
+
+	pm_power_off = mx31moboard_poweroff;
+}
+
+static void __init mx31moboard_late(void)
+{
+	gpio_led_register_device(-1, &mx31moboard_led_pdata);
+
+	moboard_uart0_init();
+
 	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
 	moboard_spi_board_info[0].irq =
@@ -549,18 +560,11 @@ static void __init mx31moboard_init(void)
 
 	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
-	mx31moboard_init_cam();
-
 	usb_xcvr_reset();
-
 	moboard_usbh2_init();
 
-	imx31_add_imx_ssi(0, &moboard_ssi_pdata);
-
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 
-	pm_power_off = mx31moboard_poweroff;
-
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -601,5 +605,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.init_irq = mx31_init_irq,
 	.init_time	= mx31moboard_timer_init,
 	.init_machine = mx31moboard_init,
+	.init_late	= mx31moboard_late,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 7e315f0..c8c2e09 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -555,8 +555,6 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = {
  */
 static void __init mx35_3ds_init(void)
 {
-	struct platform_device *imx35_fb_pdev;
-
 	imx35_soc_init();
 
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
@@ -579,9 +577,6 @@ static void __init mx35_3ds_init(void)
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
 	imx35_add_sdhci_esdhc_imx(0, NULL);
 
-	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
-		pr_warn("Init of the debugboard failed, all "
-				"devices on the debugboard are unusable.\n");
 	imx35_add_imx_i2c0(&mx35_3ds_i2c0_data);
 
 	i2c_register_board_info(
@@ -590,6 +585,15 @@ static void __init mx35_3ds_init(void)
 	imx35_add_ipu_core();
 	platform_device_register(&mx35_3ds_ov2640);
 	imx35_3ds_init_camera();
+}
+
+static void __init mx35_3ds_late_init(void)
+{
+	struct platform_device *imx35_fb_pdev;
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1)))
+		pr_warn("Init of the debugboard failed, all "
+			"devices on the debugboard are unusable.\n");
 
 	imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata);
 	mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev;
@@ -618,6 +622,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.init_irq = mx35_init_irq,
 	.init_time	= mx35pdk_timer_init,
 	.init_machine = mx35_3ds_init,
+	.init_late	= mx35_3ds_late_init,
 	.reserve = mx35_3ds_reserve,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 2d1c50b..ed67586 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -362,12 +362,8 @@ static void __init pca100_init(void)
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
-	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
-
 	imx27_add_imx_uart0(&uart_pdata);
 
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-
 	imx27_add_mxc_nand(&pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
@@ -382,6 +378,19 @@ static void __init pca100_init(void)
 				ARRAY_SIZE(pca100_spi_board_info));
 	imx27_add_spi_imx0(&pca100_spi0_data);
 
+	imx27_add_imx_fb(&pca100_fb_data);
+
+	imx27_add_fec(NULL);
+	imx27_add_imx2_wdt();
+	imx27_add_mxc_w1();
+}
+
+static void __init pca100_late_init(void)
+{
+	imx27_add_imx_ssi(0, &pca100_ssi_pdata);
+
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
+
 	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
 	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
 	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
@@ -403,12 +412,6 @@ static void __init pca100_init(void)
 
 	if (usbh2_pdata.otg)
 		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_imx_fb(&pca100_fb_data);
-
-	imx27_add_fec(NULL);
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
 }
 
 static void __init pca100_timer_init(void)
@@ -421,7 +424,8 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
-	.init_machine = pca100_init,
+	.init_machine	= pca100_init,
+	.init_late	= pca100_late_init,
 	.init_time	= pca100_timer_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 6d87941..9f0f55b 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -149,7 +149,7 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CONTRAST__CONTRAST,
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
-	MX31_PIN_LCS0__GPI03_23,
+	MX31_PIN_LCS0__GPIO3_23,
 	/* CSI */
 	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
 	MX31_PIN_CSI_D6__CSI_D6,
@@ -576,8 +576,6 @@ static struct regulator_consumer_supply dummy_supplies[] = {
  */
 static void __init pcm037_init(void)
 {
-	int ret;
-
 	imx31_soc_init();
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
@@ -621,20 +619,6 @@ static void __init pcm037_init(void)
 
 	imx31_add_mxc_w1();
 
-	/* LAN9217 IRQ pin */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
-	if (ret)
-		pr_warn("could not get LAN irq gpio\n");
-	else {
-		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		smsc911x_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		smsc911x_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
-		platform_device_register(&pcm037_eth);
-	}
-
-
 	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
@@ -643,26 +627,9 @@ static void __init pcm037_init(void)
 	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	imx31_add_mxc_mmc(0, &sdhc_pdata);
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
-	/* CSI */
-	/* Camera power: default - off */
-	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
-	if (!ret)
-		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
-	else
-		iclink_mt9t031.power = NULL;
-
-	pcm037_init_camera();
-
-	pcm970_sja1000_resources[1].start =
-			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
-	pcm970_sja1000_resources[1].end =
-			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
-	platform_device_register(&pcm970_sja1000);
-
 	if (otg_mode_host) {
 		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 				ULPI_OTG_DRVVBUS_EXT);
@@ -677,7 +644,6 @@ static void __init pcm037_init(void)
 
 	if (!otg_mode_host)
 		imx31_add_fsl_usb2_udc(&otg_device_pdata);
-
 }
 
 static void __init pcm037_timer_init(void)
@@ -694,6 +660,39 @@ static void __init pcm037_reserve(void)
 
 static void __init pcm037_init_late(void)
 {
+	int ret;
+
+	/* LAN9217 IRQ pin */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+	if (!ret) {
+		gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		smsc911x_resources[1].start =
+			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		smsc911x_resources[1].end =
+			gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+		platform_device_register(&pcm037_eth);
+	} else {
+		pr_warn("could not get LAN irq gpio\n");
+	}
+
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink_mt9t031.power = NULL;
+
+	pcm037_init_camera();
+
+	pcm970_sja1000_resources[1].start =
+			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+	pcm970_sja1000_resources[1].end =
+			gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105)));
+	platform_device_register(&pcm970_sja1000);
+
 	pcm037_eet_init_devices();
 }
 
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index e447e59..78e2bf8 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -363,7 +363,6 @@ static void __init pcm043_init(void)
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&pcm037_nand_board_info);
-	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
 
 	imx35_add_imx_uart1(&uart_pdata);
 
@@ -387,6 +386,12 @@ static void __init pcm043_init(void)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1();
+}
+
+static void __init pcm043_late_init(void)
+{
+	imx35_add_imx_ssi(0, &pcm043_ssi_pdata);
+
 	imx35_add_sdhci_esdhc_imx(0, &sd1_pdata);
 }
 
@@ -402,6 +407,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
 	.init_time = pcm043_timer_init,
-	.init_machine = pcm043_init,
+	.init_machine	= pcm043_init,
+	.init_late	= pcm043_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 34df64f..8c2cbd6 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -251,7 +251,6 @@ static void __init qong_init(void)
 
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
-	qong_init_fpga();
 	imx31_add_imx2_wdt();
 }
 
@@ -268,5 +267,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.init_irq = mx31_init_irq,
 	.init_time	= qong_timer_init,
 	.init_machine = qong_init,
+	.init_late	= qong_init_fpga,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
deleted file mode 100644
index 1f6bc3f..0000000
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * linux/arch/arm/mach-mx1/mach-scb9328.c
- *
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/interrupt.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-/*
- * This scb9328 has a 32MiB flash
- */
-static struct resource flash_resource = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + (32 * 1024 * 1024) - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data scb_flash_data = {
-	.width  = 2,
-};
-
-static struct platform_device scb_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = &scb_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/*
- * scb9328 has a DM9000 network controller
- * connected to CS5, with 16 bit data path
- * and interrupt connected to GPIO 3
- */
-
-/*
- * internal datapath is fixed 16 bit
- */
-static struct dm9000_plat_data dm9000_platdata = {
-	.flags	= DM9000_PLATF_16BITONLY,
-};
-
-/*
- * the DM9000 drivers wants two defined address spaces
- * to gain access to address latch registers and the data path.
- */
-static struct resource dm9000x_resources[] = {
-	{
-		.name	= "address area",
-		.start	= MX1_CS5_PHYS,
-		.end	= MX1_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM,	/* address access */
-	}, {
-		.name	= "data area",
-		.start	= MX1_CS5_PHYS + 4,
-		.end	= MX1_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM,	/* data access */
-	}, {
-		/* irq number is run-time assigned */
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device dm9000x_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000x_resources),
-	.resource	= dm9000x_resources,
-	.dev		= {
-		.platform_data = &dm9000_platdata,
-	}
-};
-
-static const int mxc_uart1_pins[] = {
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&scb_flash_device,
-	&dm9000x_device,
-};
-
-/*
- * scb9328_init - Init the CPU card itself
- */
-static void __init scb9328_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins), "UART1");
-
-	imx1_add_imx_uart0(&uart_pdata);
-
-	printk(KERN_INFO"Scb9328: Adding devices\n");
-	dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init scb9328_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-MACHINE_START(SCB9328, "Synertronixx scb9328")
-	/* Sascha Hauer */
-	.atag_offset = 100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= scb9328_timer_init,
-	.init_machine = scb9328_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 27a8f7e..5ff154c 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -268,6 +268,22 @@ static void __init vpr200_board_init(void)
 
 	imx35_add_fec(NULL);
 	imx35_add_imx2_wdt();
+
+	imx35_add_imx_uart0(NULL);
+	imx35_add_imx_uart2(NULL);
+
+	imx35_add_ipu_core();
+	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
+
+	imx35_add_fsl_usb2_udc(&otg_device_pdata);
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
+
+	imx35_add_mxc_nand(&vpr200_nand_board_info);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
+}
+
+static void __init vpr200_late_init(void)
+{
 	imx_add_gpio_keys(&vpr200_gpio_keys_data);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -282,18 +298,6 @@ static void __init vpr200_board_init(void)
 	else
 		gpio_direction_input(GPIO_PMIC_INT);
 
-	imx35_add_imx_uart0(NULL);
-	imx35_add_imx_uart2(NULL);
-
-	imx35_add_ipu_core();
-	imx35_add_mx3_sdc_fb(&mx3fb_pdata);
-
-	imx35_add_fsl_usb2_udc(&otg_device_pdata);
-	imx35_add_mxc_ehci_hs(&usb_host_pdata);
-
-	imx35_add_mxc_nand(&vpr200_nand_board_info);
-	imx35_add_sdhci_esdhc_imx(0, NULL);
-
 	vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT);
 	i2c_register_board_info(0, vpr200_i2c_devices,
 			ARRAY_SIZE(vpr200_i2c_devices));
@@ -313,5 +317,6 @@ MACHINE_START(VPR200, "VPR200")
 	.init_irq = mx35_init_irq,
 	.init_time = vpr200_timer_init,
 	.init_machine = vpr200_board_init,
+	.init_late	= vpr200_late_init,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
deleted file mode 100644
index 9a42f19..0000000
--- a/arch/arm/mach-imx/mm-imx1.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX1 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v1.h"
-
-static struct map_desc imx_io_desc[] __initdata = {
-	imx_map_entry(MX1, IO, MT_DEVICE),
-};
-
-void __init mx1_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-void __init imx1_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX1);
-	imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-			MX1_NUM_GPIO_PORT);
-}
-
-void __init mx1_init_irq(void)
-{
-	mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR));
-}
-
-void __init imx1_soc_init(void)
-{
-	imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR));
-	mxc_device_init();
-
-	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTA, 0);
-	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTB, 0);
-	mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTC, 0);
-	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
-						MX1_GPIO_INT_PORTD, 0);
-	imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR,
-			MX1_DMA_INT, MX1_DMA_ERR);
-	pinctrl_provide_dummies();
-}
diff --git a/arch/arm/mach-imx/mx1.h b/arch/arm/mach-imx/mx1.h
deleted file mode 100644
index 45bd31c..0000000
--- a/arch/arm/mach-imx/mx1.h
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) 1997,1998 Russell King
- * Copyright (C) 1999 ARM Limited
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MX1_H__
-#define __MACH_MX1_H__
-
-/*
- * Memory map
- */
-#define MX1_IO_BASE_ADDR	0x00200000
-#define MX1_IO_SIZE		SZ_1M
-
-#define MX1_CS0_PHYS		0x10000000
-#define MX1_CS0_SIZE		0x02000000
-
-#define MX1_CS1_PHYS		0x12000000
-#define MX1_CS1_SIZE		0x01000000
-
-#define MX1_CS2_PHYS		0x13000000
-#define MX1_CS2_SIZE		0x01000000
-
-#define MX1_CS3_PHYS		0x14000000
-#define MX1_CS3_SIZE		0x01000000
-
-#define MX1_CS4_PHYS		0x15000000
-#define MX1_CS4_SIZE		0x01000000
-
-#define MX1_CS5_PHYS		0x16000000
-#define MX1_CS5_SIZE		0x01000000
-
-/*
- *  Register BASEs, based on OFFSETs
- */
-#define MX1_AIPI1_BASE_ADDR		(0x00000 + MX1_IO_BASE_ADDR)
-#define MX1_WDT_BASE_ADDR		(0x01000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM1_BASE_ADDR		(0x02000 + MX1_IO_BASE_ADDR)
-#define MX1_TIM2_BASE_ADDR		(0x03000 + MX1_IO_BASE_ADDR)
-#define MX1_RTC_BASE_ADDR		(0x04000 + MX1_IO_BASE_ADDR)
-#define MX1_LCDC_BASE_ADDR		(0x05000 + MX1_IO_BASE_ADDR)
-#define MX1_UART1_BASE_ADDR		(0x06000 + MX1_IO_BASE_ADDR)
-#define MX1_UART2_BASE_ADDR		(0x07000 + MX1_IO_BASE_ADDR)
-#define MX1_PWM_BASE_ADDR		(0x08000 + MX1_IO_BASE_ADDR)
-#define MX1_DMA_BASE_ADDR		(0x09000 + MX1_IO_BASE_ADDR)
-#define MX1_AIPI2_BASE_ADDR		(0x10000 + MX1_IO_BASE_ADDR)
-#define MX1_SIM_BASE_ADDR		(0x11000 + MX1_IO_BASE_ADDR)
-#define MX1_USBD_BASE_ADDR		(0x12000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI1_BASE_ADDR		(0x13000 + MX1_IO_BASE_ADDR)
-#define MX1_MMC_BASE_ADDR		(0x14000 + MX1_IO_BASE_ADDR)
-#define MX1_ASP_BASE_ADDR		(0x15000 + MX1_IO_BASE_ADDR)
-#define MX1_BTA_BASE_ADDR		(0x16000 + MX1_IO_BASE_ADDR)
-#define MX1_I2C_BASE_ADDR		(0x17000 + MX1_IO_BASE_ADDR)
-#define MX1_SSI_BASE_ADDR		(0x18000 + MX1_IO_BASE_ADDR)
-#define MX1_CSPI2_BASE_ADDR		(0x19000 + MX1_IO_BASE_ADDR)
-#define MX1_MSHC_BASE_ADDR		(0x1A000 + MX1_IO_BASE_ADDR)
-#define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
-#define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO1_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO2_BASE_ADDR		(0x1C100 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO3_BASE_ADDR		(0x1C200 + MX1_IO_BASE_ADDR)
-#define MX1_GPIO4_BASE_ADDR		(0x1C300 + MX1_IO_BASE_ADDR)
-#define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
-#define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
-#define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
-#define MX1_AVIC_BASE_ADDR		(0x23000 + MX1_IO_BASE_ADDR)
-#define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
-
-/* macro to get at IO space when running virtually */
-#define MX1_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX1_IO_ADDRESS(x)		IOMEM(MX1_IO_P2V(x))
-
-/* fixed interrput numbers */
-#include <asm/irq.h>
-#define MX1_INT_SOFTINT		(NR_IRQS_LEGACY + 0)
-#define MX1_INT_CSI		(NR_IRQS_LEGACY + 6)
-#define MX1_DSPA_MAC_INT	(NR_IRQS_LEGACY + 7)
-#define MX1_DSPA_INT		(NR_IRQS_LEGACY + 8)
-#define MX1_COMP_INT		(NR_IRQS_LEGACY + 9)
-#define MX1_MSHC_XINT		(NR_IRQS_LEGACY + 10)
-#define MX1_GPIO_INT_PORTA	(NR_IRQS_LEGACY + 11)
-#define MX1_GPIO_INT_PORTB	(NR_IRQS_LEGACY + 12)
-#define MX1_GPIO_INT_PORTC	(NR_IRQS_LEGACY + 13)
-#define MX1_INT_LCDC		(NR_IRQS_LEGACY + 14)
-#define MX1_SIM_INT		(NR_IRQS_LEGACY + 15)
-#define MX1_SIM_DATA_INT	(NR_IRQS_LEGACY + 16)
-#define MX1_RTC_INT		(NR_IRQS_LEGACY + 17)
-#define MX1_RTC_SAMINT		(NR_IRQS_LEGACY + 18)
-#define MX1_INT_UART2PFERR	(NR_IRQS_LEGACY + 19)
-#define MX1_INT_UART2RTS	(NR_IRQS_LEGACY + 20)
-#define MX1_INT_UART2DTR	(NR_IRQS_LEGACY + 21)
-#define MX1_INT_UART2UARTC	(NR_IRQS_LEGACY + 22)
-#define MX1_INT_UART2TX		(NR_IRQS_LEGACY + 23)
-#define MX1_INT_UART2RX		(NR_IRQS_LEGACY + 24)
-#define MX1_INT_UART1PFERR	(NR_IRQS_LEGACY + 25)
-#define MX1_INT_UART1RTS	(NR_IRQS_LEGACY + 26)
-#define MX1_INT_UART1DTR	(NR_IRQS_LEGACY + 27)
-#define MX1_INT_UART1UARTC	(NR_IRQS_LEGACY + 28)
-#define MX1_INT_UART1TX		(NR_IRQS_LEGACY + 29)
-#define MX1_INT_UART1RX		(NR_IRQS_LEGACY + 30)
-#define MX1_VOICE_DAC_INT	(NR_IRQS_LEGACY + 31)
-#define MX1_VOICE_ADC_INT	(NR_IRQS_LEGACY + 32)
-#define MX1_PEN_DATA_INT	(NR_IRQS_LEGACY + 33)
-#define MX1_PWM_INT		(NR_IRQS_LEGACY + 34)
-#define MX1_SDHC_INT		(NR_IRQS_LEGACY + 35)
-#define MX1_INT_I2C		(NR_IRQS_LEGACY + 39)
-#define MX1_INT_CSPI2		(NR_IRQS_LEGACY + 40)
-#define MX1_INT_CSPI1		(NR_IRQS_LEGACY + 41)
-#define MX1_SSI_TX_INT		(NR_IRQS_LEGACY + 42)
-#define MX1_SSI_TX_ERR_INT	(NR_IRQS_LEGACY + 43)
-#define MX1_SSI_RX_INT		(NR_IRQS_LEGACY + 44)
-#define MX1_SSI_RX_ERR_INT	(NR_IRQS_LEGACY + 45)
-#define MX1_TOUCH_INT		(NR_IRQS_LEGACY + 46)
-#define MX1_INT_USBD0		(NR_IRQS_LEGACY + 47)
-#define MX1_INT_USBD1		(NR_IRQS_LEGACY + 48)
-#define MX1_INT_USBD2		(NR_IRQS_LEGACY + 49)
-#define MX1_INT_USBD3		(NR_IRQS_LEGACY + 50)
-#define MX1_INT_USBD4		(NR_IRQS_LEGACY + 51)
-#define MX1_INT_USBD5		(NR_IRQS_LEGACY + 52)
-#define MX1_INT_USBD6		(NR_IRQS_LEGACY + 53)
-#define MX1_BTSYS_INT		(NR_IRQS_LEGACY + 55)
-#define MX1_BTTIM_INT		(NR_IRQS_LEGACY + 56)
-#define MX1_BTWUI_INT		(NR_IRQS_LEGACY + 57)
-#define MX1_TIM2_INT		(NR_IRQS_LEGACY + 58)
-#define MX1_TIM1_INT		(NR_IRQS_LEGACY + 59)
-#define MX1_DMA_ERR		(NR_IRQS_LEGACY + 60)
-#define MX1_DMA_INT		(NR_IRQS_LEGACY + 61)
-#define MX1_GPIO_INT_PORTD	(NR_IRQS_LEGACY + 62)
-#define MX1_WDT_INT		(NR_IRQS_LEGACY + 63)
-
-/* DMA */
-#define MX1_DMA_REQ_UART3_T		2
-#define MX1_DMA_REQ_UART3_R		3
-#define MX1_DMA_REQ_SSI2_T		4
-#define MX1_DMA_REQ_SSI2_R		5
-#define MX1_DMA_REQ_CSI_STAT		6
-#define MX1_DMA_REQ_CSI_R		7
-#define MX1_DMA_REQ_MSHC		8
-#define MX1_DMA_REQ_DSPA_DCT_DOUT	9
-#define MX1_DMA_REQ_DSPA_DCT_DIN	10
-#define MX1_DMA_REQ_DSPA_MAC		11
-#define MX1_DMA_REQ_EXT			12
-#define MX1_DMA_REQ_SDHC		13
-#define MX1_DMA_REQ_SPI1_R		14
-#define MX1_DMA_REQ_SPI1_T		15
-#define MX1_DMA_REQ_SSI_T		16
-#define MX1_DMA_REQ_SSI_R		17
-#define MX1_DMA_REQ_ASP_DAC		18
-#define MX1_DMA_REQ_ASP_ADC		19
-#define MX1_DMA_REQ_USP_EP(x)		(20 + (x))
-#define MX1_DMA_REQ_SPI2_R		26
-#define MX1_DMA_REQ_SPI2_T		27
-#define MX1_DMA_REQ_UART2_T		28
-#define MX1_DMA_REQ_UART2_R		29
-#define MX1_DMA_REQ_UART1_T		30
-#define MX1_DMA_REQ_UART1_R		31
-
-/*
- * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
- * to not break drivers/usb/gadget/imx_udc.  Should go
- * away after this driver uses the new name.
- */
-#define USBD_INT0		MX1_INT_USBD0
-
-#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c
index 649fe49..231f900 100644
--- a/arch/arm/mach-imx/mx31lilly-db.c
+++ b/arch/arm/mach-imx/mx31lilly-db.c
@@ -43,18 +43,6 @@
  */
 
 static unsigned int lilly_db_board_pins[] __initdata = {
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	MX31_PIN_CTS2__CTS2,
-	MX31_PIN_RTS2__RTS2,
-	MX31_PIN_TXD2__TXD2,
-	MX31_PIN_RXD2__RXD2,
-	MX31_PIN_CSPI3_MOSI__RXD3,
-	MX31_PIN_CSPI3_MISO__TXD3,
-	MX31_PIN_CSPI3_SCLK__RTS3,
-	MX31_PIN_CSPI3_SPI_RDY__CTS3,
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -86,11 +74,6 @@ static unsigned int lilly_db_board_pins[] __initdata = {
 	MX31_PIN_CONTRAST__CONTRAST,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC support */
 
 static int mxc_mmc1_get_ro(struct device *dev)
@@ -203,9 +186,6 @@ void __init mx31lilly_db_init(void)
 	mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
 					ARRAY_SIZE(lilly_db_board_pins),
 					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_imx_uart1(&uart_pdata);
-	imx31_add_imx_uart2(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index 5a160b7..c66a006 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -45,19 +45,6 @@
  */
 
 static unsigned int litekit_db_board_pins[] __initdata = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
-	/* SPI 0 */
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_DATA1__SD1_DATA1,
@@ -67,11 +54,6 @@ static unsigned int litekit_db_board_pins[] __initdata = {
 	MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
-/* UART */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
 /* MMC */
 
 static int gpio_det, gpio_wp;
@@ -146,19 +128,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = {
 	.exit	   = mxc_mmc1_exit,
 };
 
-/* SPI */
-
-static int spi_internal_chipselect[] = {
-	MXC_SPI_CS(0),
-	MXC_SPI_CS(1),
-	MXC_SPI_CS(2),
-};
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.chipselect	= spi_internal_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
-};
-
 /* GPIO LEDs */
 
 static const struct gpio_led litekit_leds[] __initconst = {
@@ -187,9 +156,7 @@ void __init mx31lite_db_init(void)
 	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
-	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_mmc(0, &mmc_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
 	gpio_led_register_device(-1, &litekit_led_platform_data);
 	imx31_add_imx2_wdt();
 	imx31_add_mxc_rtc();
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 58924b3..1515e49 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -217,7 +217,7 @@ struct imx6_cpu_pm_info {
 	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
 } __aligned(8);
 
-void imx6q_set_int_mem_clk_lpm(bool enable)
+void imx6_set_int_mem_clk_lpm(bool enable)
 {
 	u32 val = readl_relaxed(ccm_base + CGPR);
 
@@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val &= ~BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
 		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
@@ -367,7 +367,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
 		imx6_set_lpm(STOP_POWER_ON);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx_gpc_pre_suspend(false);
 		if (cpu_is_imx6sl())
 			imx6sl_set_wait_clk(true);
@@ -380,7 +380,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		break;
 	case PM_SUSPEND_MEM:
 		imx6_set_lpm(STOP_POWER_OFF);
-		imx6q_set_int_mem_clk_lpm(false);
+		imx6_set_int_mem_clk_lpm(false);
 		imx6q_enable_wb(true);
 		/*
 		 * For suspend into ocram, asm code already take care of
@@ -398,7 +398,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		imx_gpc_post_resume();
 		imx6_enable_rbc(false);
 		imx6q_enable_wb(false);
-		imx6q_set_int_mem_clk_lpm(true);
+		imx6_set_int_mem_clk_lpm(true);
 		imx6_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 599f973..cefe44f 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -21,7 +21,6 @@ if ARCH_INTEGRATOR
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select INTEGRATOR_AP_TIMER
-	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY
 	select SOC_BUS
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index c7bb832..23b98fd 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -17,33 +17,19 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/syscore_ops.h>
 #include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/platform_data/clk-integrator.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/stat.h>
 #include <linux/termios.h>
 
-#include <asm/setup.h>
-#include <asm/param.h>		/* HZ */
-#include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
@@ -68,14 +54,8 @@ static void __iomem *ebi_base;
 
 /*
  * Logical      Physical
- * ef000000			Cache flush
- * f1100000	11000000	System controller registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
  */
 
 static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
@@ -89,16 +69,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
 	}
 };
 
@@ -196,16 +166,10 @@ static void __init ap_init_irq_of(void)
 
 /* For the Device Tree, add in the UART callbacks as AUXDATA */
 static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
 		"uart0", &ap_uart_data),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
 		"uart1", &ap_uart_data),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 8252983..772a7cf 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -7,67 +7,40 @@
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License.
  */
-#include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/string.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/kmi.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/irqchip.h>
-#include <linux/gfp.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/sched_clock.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
 
-#include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 
 #include "hardware.h"
 #include "cm.h"
 #include "common.h"
 
+/* Base address to the core module header */
+static struct regmap *cm_map;
 /* Base address to the CP controller */
 static void __iomem *intcp_con_base;
 
-#define INTCP_PA_CLCD_BASE		0xc0000000
+#define CM_COUNTER_OFFSET 0x28
 
 /*
  * Logical      Physical
- * f1000000	10000000	Core module registers
- * f1300000	13000000	Counter/Timer
  * f1400000	14000000	Interrupt controller
  * f1600000	16000000	UART 0
- * f1700000	17000000	UART 1
- * f1a00000	1a000000	Debug LEDs
- * fc900000	c9000000	GPIO
  * fca00000	ca000000	SIC
  */
 
 static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
 	{
-		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CT_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CT_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
 		.length		= SZ_4K,
@@ -78,16 +51,6 @@ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_DBG_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_DBG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
 		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
@@ -121,66 +84,20 @@ static struct mmci_platform_data mmc_data = {
 	.gpio_cd	= -1,
 };
 
-/*
- * CLCD support
- */
-/*
- * Ensure VGA is selected.
- */
-static void cp_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
-			| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
-
-	if (var->bits_per_pixel <= 8 ||
-	    (var->bits_per_pixel == 16 && var->green.length == 5))
-		/* Pseudocolor, RGB555, BGR555 */
-		val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
-	else if (fb->fb.var.bits_per_pixel <= 16)
-		/* truecolor RGB565 */
-		val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
-	else
-		val = 0; /* no idea for this, don't trust the docs */
-
-	cm_control(CM_CTRL_LCDMUXSEL_MASK|
-		   CM_CTRL_LCDEN0|
-		   CM_CTRL_LCDEN1|
-		   CM_CTRL_STATIC1|
-		   CM_CTRL_STATIC2|
-		   CM_CTRL_STATIC|
-		   CM_CTRL_n24BITEN, val);
-}
-
-static int cp_clcd_setup(struct clcd_fb *fb)
-{
-	fb->panel = versatile_clcd_get_panel("VGA");
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static struct clcd_board clcd_data = {
-	.name		= "Integrator/CP",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.enable		= cp_clcd_enable,
-	.setup		= cp_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
-
 static u64 notrace intcp_read_sched_clock(void)
 {
-	return readl(REFCOUNTER);
+	unsigned int val;
+
+	/* MMIO so discard return code */
+	regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
+	return val;
 }
 
 static void __init intcp_init_early(void)
 {
+	cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
+	if (IS_ERR(cm_map))
+		return;
 	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
 }
 
@@ -195,22 +112,8 @@ static void __init intcp_init_irq_of(void)
  * and enforce the bus names since these are used for clock lookups.
  */
 static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
-		"rtc", NULL),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
-		"uart0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
-		"uart1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
-		"kmi0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
-		"kmi1", NULL),
 	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
 		"mmci", &mmc_data),
-	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
-		"aaci", &mmc_data),
-	OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
-		"clcd", &clcd_data),
 	{ /* sentinel */ },
 };
 
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 8ff61be..24bd64d 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -8,8 +8,6 @@ config ARCH_KEYSTONE
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
 	select PINCTRL
 	help
 	  Support for boards based on the Texas Instruments Keystone family of
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 6af5430..f72e1e9 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -219,7 +219,6 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ,
 			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
@@ -242,9 +241,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
 		eth_data->duplex = DUPLEX_FULL;
 	}
 
-	orion_ge10_init(eth_data,
-			GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
-			NO_IRQ);
+	orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM);
 }
 
 
@@ -266,9 +263,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
 		eth_data->duplex = DUPLEX_FULL;
 	}
 
-	orion_ge11_init(eth_data,
-			GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
-			NO_IRQ);
+	orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 0b7fe74..e4f2108 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -268,80 +268,6 @@ static void __init apx4devkit_init(void)
 					   apx4devkit_phy_fixup);
 }
 
-#define ENET0_MDC__GPIO_4_0	MXS_GPIO_NR(4, 0)
-#define ENET0_MDIO__GPIO_4_1	MXS_GPIO_NR(4, 1)
-#define ENET0_RX_EN__GPIO_4_2	MXS_GPIO_NR(4, 2)
-#define ENET0_RXD0__GPIO_4_3	MXS_GPIO_NR(4, 3)
-#define ENET0_RXD1__GPIO_4_4	MXS_GPIO_NR(4, 4)
-#define ENET0_TX_EN__GPIO_4_6	MXS_GPIO_NR(4, 6)
-#define ENET0_TXD0__GPIO_4_7	MXS_GPIO_NR(4, 7)
-#define ENET0_TXD1__GPIO_4_8	MXS_GPIO_NR(4, 8)
-#define ENET_CLK__GPIO_4_16	MXS_GPIO_NR(4, 16)
-
-#define TX28_FEC_PHY_POWER	MXS_GPIO_NR(3, 29)
-#define TX28_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
-#define TX28_FEC_nINT		MXS_GPIO_NR(4, 5)
-
-static const struct gpio const tx28_gpios[] __initconst = {
-	{ ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
-	{ ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
-	{ ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
-	{ ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" },
-	{ ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" },
-	{ ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" },
-	{ ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" },
-	{ ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" },
-	{ ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" },
-	{ TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" },
-	{ TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" },
-	{ TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" },
-};
-
-static void __init tx28_post_init(void)
-{
-	struct device_node *np;
-	struct platform_device *pdev;
-	struct pinctrl *pctl;
-	int ret;
-
-	enable_clk_enet_out();
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec");
-	pdev = of_find_device_by_node(np);
-	if (!pdev) {
-		pr_err("%s: failed to find fec device\n", __func__);
-		return;
-	}
-
-	pctl = pinctrl_get_select(&pdev->dev, "gpio_mode");
-	if (IS_ERR(pctl)) {
-		pr_err("%s: failed to get pinctrl state\n", __func__);
-		return;
-	}
-
-	ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios));
-	if (ret) {
-		pr_err("%s: failed to request gpios: %d\n", __func__, ret);
-		return;
-	}
-
-	/* Power up fec phy */
-	gpio_set_value(TX28_FEC_PHY_POWER, 1);
-	msleep(26); /* 25ms according to data sheet */
-
-	/* Mode strap pins */
-	gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1);
-	gpio_set_value(ENET0_RXD0__GPIO_4_3, 1);
-	gpio_set_value(ENET0_RXD1__GPIO_4_4, 1);
-
-	udelay(100); /* minimum assertion time for nRST */
-
-	/* Deasserting FEC PHY RESET */
-	gpio_set_value(TX28_FEC_PHY_RESET, 1);
-
-	pinctrl_put(pctl);
-}
-
 static void __init crystalfontz_init(void)
 {
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
@@ -501,9 +427,6 @@ static void __init mxs_machine_init(void)
 	of_platform_default_populate(NULL, NULL, parent);
 
 	mxs_restart_init();
-
-	if (of_machine_is_compatible("karo,tx28"))
-		tx28_post_init();
 }
 
 #define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index b7e9801..3ae45b8 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -7,6 +7,7 @@ menuconfig ARCH_NOMADIK
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
 	select CPU_ARM926T
 	select GPIOLIB
+	select MFD_SYSCON
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 7119ef2..357be2d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -19,7 +19,7 @@
 #include "board-h2.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index cd146ed..675254e 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -349,7 +349,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 43aab63..4f58bfa 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -20,7 +20,7 @@
 #include "board-h3.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index f7c8c63..e62f9d4 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -368,7 +368,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
 
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
 #endif
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 9525ef9..e424df9 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -401,7 +401,7 @@ static struct platform_device lcd_device = {
 };
 
 /* MMC Card */
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 static struct omap_mmc_platform_data htc_mmc1_data = {
 	.nr_slots                       = 1,
 	.switch_slot                    = NULL,
@@ -586,7 +586,7 @@ static void __init htcherald_init(void)
 
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 	htc_mmc_data[0] = &htc_mmc1_data;
 	omap1_init_mmc(htc_mmc_data, 1);
 #endif
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index ae90bd0..67e1882 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -315,7 +315,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
@@ -328,7 +328,7 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = {
 };
 #endif
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index dd3a3ad..ee8d9f5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -159,7 +159,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.extcon		= "tahvo-usb",
 };
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 #define NOKIA770_GPIO_MMC_POWER		41
 #define NOKIA770_GPIO_MMC_SWITCH	23
@@ -216,7 +216,7 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_CBUS_GPIO)
 static struct i2c_cbus_platform_data nokia770_cbus_data = {
 	.clk_gpio = OMAP_MPUIO(9),
 	.dat_gpio = OMAP_MPUIO(10),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index a937357..79f0af8 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -20,7 +20,7 @@
 
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 8c8be86..baaf902 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -33,7 +33,7 @@
 #include "mmc.h"
 #include "sram.h"
 
-#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
 
 #define	OMAP_RTC_BASE		0xfffb4800
 
@@ -72,7 +72,7 @@ static inline void omap_init_mbox(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
@@ -230,7 +230,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 /*-------------------------------------------------------------------------*/
 
 /* OMAP7xx SPI support */
-#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
 
 struct platform_device omap_spi1 = {
 	.name           = "omap1_spi100k",
@@ -312,7 +312,7 @@ static inline void omap_init_sti(void) {}
  * mcbsp1..3	= 5..7
  */
 
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
 
 #define	OMAP_UWIRE_BASE		0xfffb3000
 
@@ -418,7 +418,7 @@ static int __init omap1_init_devices(void)
 }
 arch_initcall(omap1_init_devices);
 
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+#if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
 
 static struct resource wdt_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
index c770d45..ddab040 100644
--- a/arch/arm/mach-omap1/fb.c
+++ b/arch/arm/mach-omap1/fb.c
@@ -33,7 +33,7 @@
 
 #include <asm/mach/map.h>
 
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP)
 
 static bool omapfb_lcd_configured;
 static struct omapfb_platform_data omapfb_config;
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
index 2c26305..a7c5559 100644
--- a/arch/arm/mach-omap1/include/mach/usb.h
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -12,7 +12,7 @@
 
 void omap_otg_init(struct omap_usb_config *config);
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+#if IS_ENABLED(CONFIG_USB)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
index 39c2b13..d7b4688 100644
--- a/arch/arm/mach-omap1/mmc.h
+++ b/arch/arm/mach-omap1/mmc.h
@@ -7,7 +7,7 @@
 #define OMAP1_MMC1_BASE		0xfffb7800
 #define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 #else
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 4118db5..2506e59 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -136,7 +136,7 @@ omap_otg_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->otg || config->register_host) {
 		struct platform_device *ohci_device = config->ohci_device;
 		int status;
@@ -221,7 +221,7 @@ static inline void udc_device_init(struct omap_usb_config *pdata)
 
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
@@ -612,7 +612,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->register_host) {
 		int status;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5a0b380..a9afeeb 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -192,12 +192,6 @@ config MACH_OMAP2_TUSB6010
 	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
-config MACH_OMAP_LDP
-	bool "OMAP3 LDP board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
@@ -222,12 +216,6 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config MACH_NOKIA_RX51
-	bool "Nokia N900 (RX-51) phone"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config OMAP3_SDRC_AC_TIMING
 	bool "Enable SDRC AC timing register changes"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a7f2d05..5b37ec2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -231,11 +231,7 @@ obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-peripherals.o
-obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51-video.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index 70b21cc..2188dc3 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -81,8 +81,7 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 		pr_err("Unable to register NOR device\n");
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
@@ -97,10 +96,9 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 
 /* Note that all values in this struct are in nanoseconds */
 struct gpmc_timings nand_default_timings[1] = {
@@ -144,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */
 
 /**
  * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index ea9aaeb..8b39eec 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -23,10 +23,7 @@ struct flash_partitions {
 	int nr_parts;
 };
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM], int nand_type);
 #else
@@ -36,8 +33,7 @@ static inline void board_flash_init(struct flash_partitions part[],
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 extern void board_nand_init(struct mtd_partition *nand_parts,
 		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
 extern struct gpmc_timings nand_default_timings[];
@@ -49,8 +45,7 @@ static inline void board_nand_init(struct mtd_partition *nand_parts,
 #define	nand_default_timings	NULL
 #endif
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_onenand_init(struct mtd_partition *nand_parts,
 					u8 nr_parts, u8 cs);
 #else
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
deleted file mode 100644
index 390795b..0000000
--- a/arch/arm/mach-omap2/board-ldp.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-ldp.c
- *
- * Copyright (C) 2008 Texas Instruments Inc.
- * Nishant Kamat <nskamat@ti.com>
- *
- * Modified from mach-omap2/board-3430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c/twl.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "hsmmc.h"
-#include "control.h"
-#include "common-board-devices.h"
-#include "display.h"
-
-#define LDP_SMSC911X_CS		1
-#define LDP_SMSC911X_GPIO	152
-#define DEBUG_BASE		0x08000000
-#define LDP_ETHR_START		DEBUG_BASE
-
-static uint32_t board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(1, 0, KEY_2),
-	KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(2, 1, KEY_6),
-	KEY(3, 1, KEY_F5),
-	KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(3, 2, KEY_F6),
-	KEY(0, 3, KEY_F7),
-	KEY(1, 3, KEY_0),
-	KEY(2, 3, KEY_F8),
-	PERSISTENT_KEY(4, 5),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	0
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data ldp_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 6,
-	.cols		= 6,
-	.rep		= 1,
-};
-
-static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
-	[0] = {
-		.code			= KEY_ENTER,
-		.gpio			= 101,
-		.desc			= "enter sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[1] = {
-		.code			= KEY_F1,
-		.gpio			= 102,
-		.desc			= "func 1",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[2] = {
-		.code			= KEY_F2,
-		.gpio			= 103,
-		.desc			= "func 2",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[3] = {
-		.code			= KEY_F3,
-		.gpio			= 104,
-		.desc			= "func 3",
-		.active_low		= 1,
-		.debounce_interval 	= 30,
-	},
-	[4] = {
-		.code			= KEY_F4,
-		.gpio			= 105,
-		.desc			= "func 4",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[5] = {
-		.code			= KEY_LEFT,
-		.gpio			= 106,
-		.desc			= "left sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[6] = {
-		.code			= KEY_RIGHT,
-		.gpio			= 107,
-		.desc			= "right sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[7] = {
-		.code			= KEY_UP,
-		.gpio			= 108,
-		.desc			= "up sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-	[8] = {
-		.code			= KEY_DOWN,
-		.gpio			= 109,
-		.desc			= "down sw",
-		.active_low		= 1,
-		.debounce_interval	= 30,
-	},
-};
-
-static struct gpio_keys_platform_data ldp_gpio_keys = {
-	.buttons		= ldp_gpio_keys_buttons,
-	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
-	.rep			= 1,
-};
-
-static struct platform_device ldp_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &ldp_gpio_keys,
-	},
-};
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.cs             = LDP_SMSC911X_CS,
-	.gpio_irq       = LDP_SMSC911X_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static inline void __init ldp_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-}
-
-/* LCD */
-
-#define LCD_PANEL_RESET_GPIO		55
-#define LCD_PANEL_QVGA_GPIO		56
-
-static const struct display_timing ldp_lcd_videomode = {
-	.pixelclock	= { 0, 5400000, 0 },
-
-	.hactive = { 0, 240, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 39, 0 },
-	.hsync_len = { 0, 3, 0 },
-
-	.vactive = { 0, 320, 0 },
-	.vfront_porch = { 0, 2, 0 },
-	.vback_porch = { 0, 7, 0 },
-	.vsync_len = { 0, 1, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data ldp_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 18,
-
-	.display_timing		= &ldp_lcd_videomode,
-
-	.enable_gpio		= -1,	/* filled in code */
-	.backlight_gpio		= -1,	/* filled in code */
-};
-
-static struct platform_device ldp_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &ldp_lcd_pdata,
-};
-
-static struct omap_dss_board_info ldp_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static void __init ldp_display_init(void)
-{
-	int r;
-
-	static struct gpio gpios[] __initdata = {
-		{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
-		{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
-	};
-
-	r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (r) {
-		pr_err("Cannot request LCD GPIOs, error %d\n", r);
-		return;
-	}
-
-	omap_display_init(&ldp_dss_data);
-}
-
-static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
-{
-	int res;
-
-	/* LCD enable GPIO */
-	ldp_lcd_pdata.enable_gpio = gpio + 7;
-
-	/* Backlight enable GPIO */
-	ldp_lcd_pdata.backlight_gpio = gpio + 15;
-
-	res = platform_device_register(&ldp_lcd_device);
-	if (res)
-		pr_err("Unable to register LCD: %d\n", res);
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.setup		= ldp_twl_gpio_setup,
-};
-
-static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data ldp_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vmmc1_supply),
-	.consumer_supplies	= ldp_vmmc1_supply,
-};
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply ldp_vaux1_supplies[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-/* VAUX1 */
-static struct regulator_init_data ldp_vaux1 = {
-	.constraints = {
-		.min_uV			= 3000000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies		= ARRAY_SIZE(ldp_vaux1_supplies),
-	.consumer_supplies		= ldp_vaux1_supplies,
-};
-
-static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"),
-	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
-};
-
-static struct regulator_init_data ldp_vpll2 = {
-	.constraints = {
-		.name			= "VDVI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldp_vpll2_supplies),
-	.consumer_supplies	= ldp_vpll2_supplies,
-};
-
-static struct twl4030_platform_data ldp_twldata = {
-	/* platform_data for children goes here */
-	.vmmc1		= &ldp_vmmc1,
-	.vaux1		= &ldp_vaux1,
-	.vpll2		= &ldp_vpll2,
-	.gpio		= &ldp_gpio_data,
-	.keypad		= &ldp_kp_twl4030_data,
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap3_pmic_get_config(&ldp_twldata,
-			  TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
-	omap3_pmic_init("twl4030", &ldp_twldata);
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{}	/* Terminator */
-};
-
-static struct platform_device *ldp_devices[] __initdata = {
-	&ldp_gpio_keys_device,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition ldp_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "File System - NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
-	},
-
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-static void __init omap_ldp_init(void)
-{
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	ldp_init_smsc911x();
-	omap_i2c_init();
-	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
-	omap_ads7846_init(1, 54, 310, NULL);
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
-			0, 0, nand_default_timings);
-
-	omap_hsmmc_init(mmc);
-	ldp_display_init();
-}
-
-MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= omap_ldp_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap_init_time,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index b6443a4..6b6fda6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -66,7 +66,7 @@ static void board_check_revision(void)
 		pr_err("Unknown board\n");
 }
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 /*
  * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
  * 1.5 V voltage regulators of PM companion chip. Companion chip will then
@@ -163,8 +163,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
 	},
 };
 
-#if defined(CONFIG_MENELAUS) &&						\
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
 
 /*
  * On both N800 and N810, only the first of the two MMC controllers is in use.
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
deleted file mode 100644
index a5ab712..0000000
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ /dev/null
@@ -1,1312 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-peripherals.c
- *
- * Copyright (C) 2008-2009 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/wl12xx.h>
-#include <linux/spi/tsc2005.h>
-#include <linux/i2c.h>
-#include <linux/i2c/twl.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mmc/host.h>
-#include <linux/power/isp1704_charger.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include <plat/dmtimer.h>
-
-#include <asm/system_info.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-
-#include "board-rx51.h"
-
-#include <sound/tlv320aic3x.h>
-#include <sound/tpa6130a2-plat.h>
-#include <linux/platform_data/media/si4713.h>
-#include <linux/platform_data/leds-lp55xx.h>
-
-#include <linux/platform_data/tsl2563.h>
-#include <linux/lis3lv02d.h>
-
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/pwm_omap_dmtimer.h>
-#include <linux/platform_data/media/ir-rx51.h>
-
-#include "mux.h"
-#include "omap-pm.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-#include "soc.h"
-#include "omap-secure.h"
-
-#define SYSTEM_REV_B_USES_VAUX3	0x1699
-#define SYSTEM_REV_S_USES_VAUX3 0x8
-
-#define RX51_WL1251_POWER_GPIO		87
-#define RX51_WL1251_IRQ_GPIO		42
-#define RX51_FMTX_RESET_GPIO		163
-#define RX51_FMTX_IRQ			53
-#define RX51_LP5523_CHIP_EN_GPIO	41
-
-#define RX51_USB_TRANSCEIVER_RST_GPIO	67
-
-#define RX51_TSC2005_RESET_GPIO         104
-#define RX51_TSC2005_IRQ_GPIO           100
-
-#define LIS302_IRQ1_GPIO 181
-#define LIS302_IRQ2_GPIO 180  /* Not yet in use */
-
-/* List all SPI devices here. Note that the list/probe order seems to matter! */
-enum {
-	RX51_SPI_WL1251,
-	RX51_SPI_TSC2005,	/* Touch Controller */
-	RX51_SPI_MIPID,		/* LCD panel */
-};
-
-static struct wl1251_platform_data wl1251_pdata;
-static struct tsc2005_platform_data tsc2005_pdata;
-
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-static int lis302_setup(void)
-{
-	int err;
-	int irq1 = LIS302_IRQ1_GPIO;
-	int irq2 = LIS302_IRQ2_GPIO;
-
-	/* gpio for interrupt pin 1 */
-	err = gpio_request(irq1, "lis3lv02dl_irq1");
-	if (err) {
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	/* gpio for interrupt pin 2 */
-	err = gpio_request(irq2, "lis3lv02dl_irq2");
-	if (err) {
-		gpio_free(irq1);
-		printk(KERN_ERR "lis3lv02dl: gpio request failed\n");
-		goto out;
-	}
-
-	gpio_direction_input(irq1);
-	gpio_direction_input(irq2);
-
-out:
-	return err;
-}
-
-static int lis302_release(void)
-{
-	gpio_free(LIS302_IRQ1_GPIO);
-	gpio_free(LIS302_IRQ2_GPIO);
-
-	return 0;
-}
-
-static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
-	.click_flags    = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	/* Limits are 0.5g * value */
-	.click_thresh_x = 8,
-	.click_thresh_y = 8,
-	.click_thresh_z = 10,
-	/* Click must be longer than time limit */
-	.click_time_limit = 9,
-	/* Kind of debounce filter */
-	.click_latency    = 50,
-
-	/* Limits for all axis. millig-value / 18 to get HW values */
-	.wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI,
-	.wakeup_thresh = 800 / 18,
-	.wakeup_flags2 = LIS3_WAKEUP_Z_HI ,
-	.wakeup_thresh2 = 900 / 18,
-
-	.hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE,
-
-	/* Interrupt line 2 for click detection, line 1 for thresholds */
-	.irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12,
-
-	.axis_x = LIS3_DEV_X,
-	.axis_y = LIS3_INV_DEV_Y,
-	.axis_z = LIS3_INV_DEV_Z,
-	.setup_resources = lis302_setup,
-	.release_resources = lis302_release,
-	.st_min_limits = {-32, 3, 3},
-	.st_max_limits = {-3, 32, 32},
-};
-#endif
-
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
-	.cover_comp_gain = 16,
-};
-#endif
-
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-static struct lp55xx_led_config rx51_lp5523_led_config[] = {
-	{
-		.name		= "lp5523:kb1",
-		.chan_nr	= 0,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb2",
-		.chan_nr	= 1,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb3",
-		.chan_nr	= 2,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb4",
-		.chan_nr	= 3,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:b",
-		.chan_nr	= 4,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:g",
-		.chan_nr	= 5,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:r",
-		.chan_nr	= 6,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb5",
-		.chan_nr	= 7,
-		.led_current	= 50,
-		.max_current	= 100,
-	}, {
-		.name		= "lp5523:kb6",
-		.chan_nr	= 8,
-		.led_current	= 50,
-		.max_current	= 100,
-	}
-};
-
-static struct lp55xx_platform_data rx51_lp5523_platform_data = {
-	.led_config		= rx51_lp5523_led_config,
-	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
-	.clock_mode		= LP55XX_CLOCK_AUTO,
-	.enable_gpio		= RX51_LP5523_CHIP_EN_GPIO,
-};
-#endif
-
-#define RX51_LCD_RESET_GPIO	90
-
-static struct panel_acx565akm_platform_data acx_pdata = {
-	.name		= "lcd",
-	.source		= "sdi.0",
-	.reset_gpio	= RX51_LCD_RESET_GPIO,
-	.datapairs	= 2,
-};
-
-static struct omap2_mcspi_device_config wl1251_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config mipid_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-	.turbo_mode	= 0,
-};
-
-static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
-	[RX51_SPI_WL1251] = {
-		.modalias		= "wl1251",
-		.bus_num		= 4,
-		.chip_select		= 0,
-		.max_speed_hz   	= 48000000,
-		.mode                   = SPI_MODE_3,
-		.controller_data	= &wl1251_mcspi_config,
-		.platform_data		= &wl1251_pdata,
-	},
-	[RX51_SPI_MIPID] = {
-		.modalias		= "acx565akm",
-		.bus_num		= 1,
-		.chip_select		= 2,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &mipid_mcspi_config,
-		.platform_data		= &acx_pdata,
-	},
-	[RX51_SPI_TSC2005] = {
-		.modalias		= "tsc2005",
-		.bus_num		= 1,
-		.chip_select		= 0,
-		.max_speed_hz		= 6000000,
-		.controller_data	= &tsc2005_mcspi_config,
-		.platform_data		= &tsc2005_pdata,
-	},
-};
-
-static struct platform_device rx51_battery_device = {
-	.name	= "rx51-battery",
-	.id	= -1,
-};
-
-static void rx51_charger_set_power(bool on)
-{
-	gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
-}
-
-static struct isp1704_charger_data rx51_charger_data = {
-	.set_power	= rx51_charger_set_power,
-};
-
-static struct platform_device rx51_charger_device = {
-	.name	= "isp1704_charger",
-	.dev	= {
-		.platform_data = &rx51_charger_data,
-	},
-};
-
-static void __init rx51_charger_init(void)
-{
-	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
-
-	platform_device_register(&rx51_battery_device);
-	platform_device_register(&rx51_charger_device);
-}
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-
-#define RX51_GPIO_CAMERA_LENS_COVER	110
-#define RX51_GPIO_CAMERA_FOCUS		68
-#define RX51_GPIO_CAMERA_CAPTURE	69
-#define RX51_GPIO_KEYPAD_SLIDE		71
-#define RX51_GPIO_LOCK_BUTTON		113
-#define RX51_GPIO_PROXIMITY		89
-
-#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
-
-static struct gpio_keys_button rx51_gpio_keys[] = {
-	{
-		.desc			= "Camera Lens Cover",
-		.type			= EV_SW,
-		.code			= SW_CAMERA_LENS_COVER,
-		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Focus",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA_FOCUS,
-		.gpio			= RX51_GPIO_CAMERA_FOCUS,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Camera Capture",
-		.type			= EV_KEY,
-		.code			= KEY_CAMERA,
-		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Lock Button",
-		.type			= EV_KEY,
-		.code			= KEY_SCREENLOCK,
-		.gpio			= RX51_GPIO_LOCK_BUTTON,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Keypad Slide",
-		.type			= EV_SW,
-		.code			= SW_KEYPAD_SLIDE,
-		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
-		.active_low		= 1,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}, {
-		.desc			= "Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.gpio			= RX51_GPIO_PROXIMITY,
-		.active_low		= 0,
-		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
-	}
-};
-
-static struct gpio_keys_platform_data rx51_gpio_keys_data = {
-	.buttons	= rx51_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
-};
-
-static struct platform_device rx51_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &rx51_gpio_keys_data,
-	},
-};
-
-static void __init rx51_add_gpio_keys(void)
-{
-	platform_device_register(&rx51_gpio_keys_device);
-}
-#else
-static void __init rx51_add_gpio_keys(void)
-{
-}
-#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
-
-static uint32_t board_keymap[] = {
-	/*
-	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
-	 * connected to the ground" matrix state.
-	 */
-	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_O),
-	KEY(0, 2, KEY_P),
-	KEY(0, 3, KEY_COMMA),
-	KEY(0, 4, KEY_BACKSPACE),
-	KEY(0, 6, KEY_A),
-	KEY(0, 7, KEY_S),
-
-	KEY(1, 0, KEY_W),
-	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_F),
-	KEY(1, 3, KEY_G),
-	KEY(1, 4, KEY_H),
-	KEY(1, 5, KEY_J),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_L),
-
-	KEY(2, 0, KEY_E),
-	KEY(2, 1, KEY_DOT),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(2, 5, KEY_Z),
-	KEY(2, 6, KEY_X),
-	KEY(2, 7, KEY_C),
-	KEY(2, 8, KEY_F9),
-
-	KEY(3, 0, KEY_R),
-	KEY(3, 1, KEY_V),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_N),
-	KEY(3, 4, KEY_M),
-	KEY(3, 5, KEY_SPACE),
-	KEY(3, 6, KEY_SPACE),
-	KEY(3, 7, KEY_LEFT),
-
-	KEY(4, 0, KEY_T),
-	KEY(4, 1, KEY_DOWN),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(4, 5, KEY_RIGHTALT),
-	KEY(4, 6, KEY_LEFTSHIFT),
-	KEY(4, 8, KEY_F10),
-
-	KEY(5, 0, KEY_Y),
-	KEY(5, 8, KEY_F11),
-
-	KEY(6, 0, KEY_U),
-
-	KEY(7, 0, KEY_I),
-	KEY(7, 1, KEY_F7),
-	KEY(7, 2, KEY_F8),
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data rx51_kp_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-/* Enable input logic and pull all lines up when eMMC is on. */
-static struct omap_board_mux rx51_mmc2_on_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-/* Disable input logic and pull all lines down when eMMC is off. */
-static struct omap_board_mux rx51_mmc2_off_mux[] = {
-	OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_mux_partition *partition;
-
-/*
- * Current flows to eMMC when eMMC is off and the data lines are pulled up,
- * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
- */
-static void rx51_mmc2_remux(struct device *dev, int power_on)
-{
-	if (power_on)
-		omap_mux_write_array(partition, rx51_mmc2_on_mux);
-	else
-		omap_mux_write_array(partition, rx51_mmc2_off_mux);
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.name		= "external",
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.cover_only	= true,
-		.gpio_cd	= 160,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.name		= "internal",
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-						/* See also rx51_mmc2_remux */
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.nonremovable	= true,
-		.remux		= rx51_mmc2_remux,
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply rx51_vaux2_supply[] = {
-	REGULATOR_SUPPLY("vdds_csib", "omap3isp"),
-};
-
-static struct regulator_consumer_supply rx51_vaux3_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vsim_supply[] = {
-	REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
-	/* tlv320aic3x analog supplies */
-	REGULATOR_SUPPLY("AVDD", "2-0018"),
-	REGULATOR_SUPPLY("DRVDD", "2-0018"),
-	REGULATOR_SUPPLY("AVDD", "2-0019"),
-	REGULATOR_SUPPLY("DRVDD", "2-0019"),
-	/* tpa6130a2 */
-	REGULATOR_SUPPLY("Vdd", "2-0060"),
-	/* Keep vmmc as last item. It is not iterated for newer boards */
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-static struct regulator_consumer_supply rx51_vio_supplies[] = {
-	/* tlv320aic3x digital supplies */
-	REGULATOR_SUPPLY("IOVDD", "2-0018"),
-	REGULATOR_SUPPLY("DVDD", "2-0018"),
-	REGULATOR_SUPPLY("IOVDD", "2-0019"),
-	REGULATOR_SUPPLY("DVDD", "2-0019"),
-	/* Si4713 IO supply */
-	REGULATOR_SUPPLY("vio", "2-0063"),
-	/* lis3lv02d */
-	REGULATOR_SUPPLY("Vdd_IO", "3-001d"),
-};
-
-static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
-	REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"),
-	/* Si4713 supply */
-	REGULATOR_SUPPLY("vdd", "2-0063"),
-	/* lis3lv02d */
-	REGULATOR_SUPPLY("Vdd", "3-001d"),
-};
-
-static struct regulator_init_data rx51_vaux1 = {
-	.constraints = {
-		.name			= "V28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.always_on		= true, /* due battery cover sensor */
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
-	.consumer_supplies	= rx51_vaux1_consumers,
-};
-
-static struct regulator_init_data rx51_vaux2 = {
-	.constraints = {
-		.name			= "VCSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux2_supply),
-	.consumer_supplies	= rx51_vaux2_supply,
-};
-
-/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3_cam = {
-	.constraints = {
-		.name			= "VCAM_DIG_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vaux3_mmc = {
-	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux3_supply),
-	.consumer_supplies	= rx51_vaux3_supply,
-};
-
-static struct regulator_init_data rx51_vaux4 = {
-	.constraints = {
-		.name			= "VCAM_ANA_28",
-		.min_uV			= 2800000,
-		.max_uV			= 2800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct regulator_init_data rx51_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc1_supply),
-	.consumer_supplies	= rx51_vmmc1_supply,
-};
-
-static struct regulator_init_data rx51_vmmc2 = {
-	.constraints = {
-		.name			= "V28_A",
-		.min_uV			= 2800000,
-		.max_uV			= 3000000,
-		.always_on		= true, /* due VIO leak to AIC34 VDDs */
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
-	.consumer_supplies	= rx51_vmmc2_supplies,
-};
-
-static struct regulator_init_data rx51_vpll1 = {
-	.constraints = {
-		.name			= "VPLL",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vpll2 = {
-	.constraints = {
-		.name			= "VSDI_CSI",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vsim = {
-	.constraints = {
-		.name			= "VMMC2_IO_18",
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vsim_supply),
-	.consumer_supplies	= rx51_vsim_supply,
-};
-
-static struct regulator_init_data rx51_vio = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 1800000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
-	.consumer_supplies	= rx51_vio_supplies,
-};
-
-static struct regulator_init_data rx51_vintana1 = {
-	.constraints = {
-		.name			= "VINTANA1",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintana2 = {
-	.constraints = {
-		.name			= "VINTANA2",
-		.min_uV			= 2750000,
-		.max_uV			= 2750000,
-		.apply_uV		= true,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct regulator_init_data rx51_vintdig = {
-	.constraints = {
-		.name			= "VINTDIG",
-		.min_uV			= 1500000,
-		.max_uV			= 1500000,
-		.always_on		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
-	},
-};
-
-static struct gpiod_lookup_table rx51_fmtx_gpios_table = {
-	.dev_id = "2-0063",
-	.table = {
-		GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */
-		{ },
-	},
-};
-
-static __init void rx51_gpio_init(void)
-{
-	gpiod_add_lookup_table(&rx51_fmtx_gpios_table);
-}
-
-static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
-{
-	/* FIXME this gpio setup is just a placeholder for now */
-	gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
-	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
-				| BIT(4) | BIT(5)
-				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
-				| BIT(12) | BIT(13) | BIT(14) | BIT(15)
-				| BIT(16) | BIT(17) ,
-	.setup			= rx51_twlgpio_setup,
-};
-
-static struct twl4030_ins sleep_on_seq[] __initdata = {
-/*
- * Turn off everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
-};
-
-static struct twl4030_script sleep_on_script __initdata = {
-	.script = sleep_on_seq,
-	.size   = ARRAY_SIZE(sleep_on_seq),
-	.flags  = TWL4030_SLEEP_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_script __initdata = {
-	.script	= wakeup_seq,
-	.size	= ARRAY_SIZE(wakeup_seq),
-	.flags	= TWL4030_WAKEUP12_SCRIPT,
-};
-
-static struct twl4030_ins wakeup_p3_seq[] __initdata = {
-/*
- * Reenable everything
- */
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wakeup_p3_script __initdata = {
-	.script	= wakeup_p3_seq,
-	.size	= ARRAY_SIZE(wakeup_p3_seq),
-	.flags	= TWL4030_WAKEUP3_SCRIPT,
-};
-
-static struct twl4030_ins wrst_seq[] __initdata = {
-/*
- * Reset twl4030.
- * Reset VDD1 regulator.
- * Reset VDD2 regulator.
- * Reset VPLL1 regulator.
- * Enable sysclk output.
- * Reenable twl4030.
- */
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
-		0x13},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
-	{MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
-	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
-};
-
-static struct twl4030_script wrst_script __initdata = {
-	.script = wrst_seq,
-	.size   = ARRAY_SIZE(wrst_seq),
-	.flags  = TWL4030_WRST_SCRIPT,
-};
-
-static struct twl4030_script *twl4030_scripts[] __initdata = {
-	/* wakeup12 script should be loaded before sleep script, otherwise a
-	   board might hit retention before loading of wakeup script is
-	   completed. This can cause boot failures depending on timing issues.
-	*/
-	&wakeup_script,
-	&sleep_on_script,
-	&wakeup_p3_script,
-	&wrst_script,
-};
-
-static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
-	{ .resource = RES_VDD1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VDD2, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL1, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
-	  .remap_sleep = RES_STATE_OFF
-	},
-	{ .resource = RES_VPLL2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX3, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VAUX4, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC1, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VMMC2, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VDAC, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VSIM, .devgroup = -1,
-	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_VIO, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_32KCLKOUT, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_RESET, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ .resource = RES_MAIN_REF, .devgroup = -1,
-	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
-	},
-	{ 0, 0},
-};
-
-static struct twl4030_power_data rx51_t2scripts_data __initdata = {
-	.scripts        = twl4030_scripts,
-	.num = ARRAY_SIZE(twl4030_scripts),
-	.resource_config = twl4030_rconfig,
-};
-
-static struct twl4030_vibra_data rx51_vibra_data __initdata = {
-	.coexist	= 0,
-};
-
-static struct twl4030_audio_data rx51_audio_data __initdata = {
-	.audio_mclk	= 26000000,
-	.vibra		= &rx51_vibra_data,
-};
-
-static struct twl4030_platform_data rx51_twldata __initdata = {
-	/* platform_data for children goes here */
-	.gpio			= &rx51_gpio_data,
-	.keypad			= &rx51_kp_data,
-	.power			= &rx51_t2scripts_data,
-	.audio			= &rx51_audio_data,
-
-	.vaux1			= &rx51_vaux1,
-	.vaux2			= &rx51_vaux2,
-	.vaux4			= &rx51_vaux4,
-	.vmmc1			= &rx51_vmmc1,
-	.vpll1			= &rx51_vpll1,
-	.vpll2			= &rx51_vpll2,
-	.vsim			= &rx51_vsim,
-	.vintana1		= &rx51_vintana1,
-	.vintana2		= &rx51_vintana2,
-	.vintdig		= &rx51_vintdig,
-	.vio			= &rx51_vio,
-};
-
-static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
-	.power_gpio		= 98,
-};
-
-/* Audio setup data */
-static struct aic3x_setup_data rx51_aic34_setup = {
-	.gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED,
-	.gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT,
-};
-
-static struct aic3x_pdata rx51_aic3x_data = {
-	.setup = &rx51_aic34_setup,
-	.gpio_reset = 60,
-};
-
-static struct aic3x_pdata rx51_aic3x_data2 = {
-	.gpio_reset = 60,
-};
-
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-static struct si4713_platform_data rx51_si4713_platform_data = {
-	.is_platform_device = true
-};
-#endif
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	{
-		I2C_BOARD_INFO("si4713", 0x63),
-		.platform_data = &rx51_si4713_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-		.platform_data = &rx51_aic3x_data,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x19),
-		.platform_data = &rx51_aic3x_data2,
-	},
-#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
-	{
-		I2C_BOARD_INFO("tsl2563", 0x29),
-		.platform_data = &rx51_tsl2563_platform_data,
-	},
-#endif
-#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
-	{
-		I2C_BOARD_INFO("lp5523", 0x32),
-		.platform_data  = &rx51_lp5523_platform_data,
-	},
-#endif
-	{
-		I2C_BOARD_INFO("bq27200", 0x55),
-	},
-	{
-		I2C_BOARD_INFO("tpa6130a2", 0x60),
-		.platform_data = &rx51_tpa6130a2_data,
-	}
-};
-
-static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	{
-		I2C_BOARD_INFO("lis3lv02d", 0x1d),
-		.platform_data = &rx51_lis3lv02d_data,
-	},
-#endif
-};
-
-static int __init rx51_i2c_init(void)
-{
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	int err;
-#endif
-
-	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
-		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-		/* Only older boards use VMMC2 for internal MMC */
-		rx51_vmmc2.num_consumer_supplies--;
-	} else {
-		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-	}
-	rx51_twldata.vmmc2 = &rx51_vmmc2;
-	omap3_pmic_get_config(&rx51_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
-			TWL_COMMON_REGULATOR_VDAC);
-
-	rx51_twldata.vdac->constraints.apply_uV = true;
-	rx51_twldata.vdac->constraints.name = "VDAC";
-
-	omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata);
-#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713)
-	err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq");
-	if (err) {
-		printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err);
-		return err;
-	}
-	rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ);
-#endif
-	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
-#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
-	rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
-	rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
-#endif
-	omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
-			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
-	return 0;
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-static struct mtd_partition onenand_partitions[] = {
-	{
-		.name           = "bootloader",
-		.offset         = 0,
-		.size           = 0x20000,
-		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
-	},
-	{
-		.name           = "config",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x60000,
-	},
-	{
-		.name           = "log",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x40000,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "initfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = 0x200000,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap_onenand_platform_data board_onenand_data[] = {
-	{
-		.cs		= 0,
-		.gpio_irq	= 65,
-		.parts		= onenand_partitions,
-		.nr_parts	= ARRAY_SIZE(onenand_partitions),
-		.flags		= ONENAND_SYNC_READWRITE,
-	}
-};
-#endif
-
-static struct gpio rx51_wl1251_gpios[] __initdata = {
-	{ RX51_WL1251_IRQ_GPIO,	  GPIOF_IN,		"wl1251 irq"	},
-};
-
-static void __init rx51_init_wl1251(void)
-{
-	int irq, ret;
-
-	ret = gpio_request_array(rx51_wl1251_gpios,
-				 ARRAY_SIZE(rx51_wl1251_gpios));
-	if (ret < 0)
-		goto error;
-
-	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
-	if (irq < 0)
-		goto err_irq;
-
-	wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO;
-	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
-
-	return;
-
-err_irq:
-	gpio_free(RX51_WL1251_IRQ_GPIO);
-error:
-	printk(KERN_ERR "wl1251 board initialisation failed\n");
-	wl1251_pdata.power_gpio = -1;
-
-	/*
-	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
-	 * set_power is null, and wl1251_probe() will fail.
-	 */
-}
-
-static struct tsc2005_platform_data tsc2005_pdata = {
-	.ts_pressure_max	= 2048,
-	.ts_pressure_fudge	= 2,
-	.ts_x_max		= 4096,
-	.ts_x_fudge		= 4,
-	.ts_y_max		= 4096,
-	.ts_y_fudge		= 7,
-	.ts_x_plate_ohm		= 280,
-	.esd_timeout_ms		= 8000,
-};
-
-static struct gpio rx51_tsc2005_gpios[] __initdata = {
-	{ RX51_TSC2005_IRQ_GPIO,   GPIOF_IN,		"tsc2005 IRQ"	},
-	{ RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,	"tsc2005 reset"	},
-};
-
-static void rx51_tsc2005_set_reset(bool enable)
-{
-	gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-}
-
-static void __init rx51_init_tsc2005(void)
-{
-	int r;
-
-	omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
-	omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
-
-	r = gpio_request_array(rx51_tsc2005_gpios,
-			       ARRAY_SIZE(rx51_tsc2005_gpios));
-	if (r < 0) {
-		printk(KERN_ERR "tsc2005 board initialization failed\n");
-		tsc2005_pdata.esd_timeout_ms = 0;
-		return;
-	}
-
-	tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
-	rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
-				gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
-}
-
-#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
-static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = {
-	.request_by_node = omap_dm_timer_request_by_node,
-	.request_specific = omap_dm_timer_request_specific,
-	.request = omap_dm_timer_request,
-	.set_source = omap_dm_timer_set_source,
-	.get_irq = omap_dm_timer_get_irq,
-	.set_int_enable = omap_dm_timer_set_int_enable,
-	.set_int_disable = omap_dm_timer_set_int_disable,
-	.free = omap_dm_timer_free,
-	.enable = omap_dm_timer_enable,
-	.disable = omap_dm_timer_disable,
-	.get_fclk = omap_dm_timer_get_fclk,
-	.start = omap_dm_timer_start,
-	.stop = omap_dm_timer_stop,
-	.set_load = omap_dm_timer_set_load,
-	.set_match = omap_dm_timer_set_match,
-	.set_pwm = omap_dm_timer_set_pwm,
-	.set_prescaler = omap_dm_timer_set_prescaler,
-	.read_counter = omap_dm_timer_read_counter,
-	.write_counter = omap_dm_timer_write_counter,
-	.read_status = omap_dm_timer_read_status,
-	.write_status = omap_dm_timer_write_status,
-};
-#endif
-
-#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
-static struct lirc_rx51_platform_data rx51_lirc_data = {
-	.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
-};
-
-static struct platform_device rx51_lirc_device = {
-	.name           = "lirc_rx51",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &rx51_lirc_data,
-	},
-};
-
-static void __init rx51_init_lirc(void)
-{
-	platform_device_register(&rx51_lirc_device);
-}
-#else
-static void __init rx51_init_lirc(void)
-{
-}
-#endif
-
-static struct platform_device madc_hwmon = {
-	.name	= "twl4030_madc_hwmon",
-	.id	= -1,
-};
-
-static void __init rx51_init_twl4030_hwmon(void)
-{
-	platform_device_register(&madc_hwmon);
-}
-
-static struct platform_device omap3_rom_rng_device = {
-	.name		= "omap3-rom-rng",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= rx51_secure_rng_call,
-	},
-};
-
-static void __init rx51_init_omap3_rom_rng(void)
-{
-	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
-		platform_device_register(&omap3_rom_rng_device);
-	}
-}
-
-void __init rx51_peripherals_init(void)
-{
-	rx51_gpio_init();
-	rx51_i2c_init();
-	regulator_has_full_constraints();
-	gpmc_onenand_init(board_onenand_data);
-	rx51_add_gpio_keys();
-	rx51_init_wl1251();
-	rx51_init_tsc2005();
-	rx51_init_lirc();
-	spi_register_board_info(rx51_peripherals_spi_board_info,
-				ARRAY_SIZE(rx51_peripherals_spi_board_info));
-
-	partition = omap_mux_get("core");
-	if (partition)
-		omap_hsmmc_init(mmc);
-
-	rx51_charger_init();
-	rx51_init_twl4030_hwmon();
-	rx51_init_omap3_rom_rng();
-}
-
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
deleted file mode 100644
index 180c6aa..0000000
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-rx51-video.c
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/mm.h>
-#include <asm/mach-types.h>
-#include <linux/platform_data/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include "soc.h"
-#include "board-rx51.h"
-#include "display.h"
-
-#include "mux.h"
-
-#define RX51_LCD_RESET_GPIO	90
-
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-
-static struct connector_atv_platform_data rx51_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.invert_polarity = false,
-};
-
-static struct platform_device rx51_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &rx51_tv_pdata,
-};
-
-static struct omap_dss_board_info rx51_dss_board_info = {
-	.default_display_name = "lcd",
-};
-
-static int __init rx51_video_init(void)
-{
-	if (!machine_is_nokia_rx51())
-		return 0;
-
-	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
-		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
-		return 0;
-	}
-
-	omap_display_init(&rx51_dss_board_info);
-
-	platform_device_register(&rx51_tv_connector_device);
-
-	return 0;
-}
-
-omap_subsys_initcall(rx51_video_init);
-#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
deleted file mode 100644
index 41161ca9..0000000
--- a/arch/arm/mach-omap2/board-rx51.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Board support file for Nokia N900 (aka RX-51).
- *
- * Copyright (C) 2007, 2008 Nokia
- * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg>
- * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/musb.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/omap-dma.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "pm.h"
-#include "soc.h"
-#include "sdram-nokia.h"
-#include "omap-secure.h"
-
-#define RX51_GPIO_SLEEP_IND 162
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name	= "sleep_ind",
-		.gpio	= RX51_GPIO_SLEEP_IND,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-/*
- * cpuidle C-states definition for rx51.
- *
- * The 'exit_latency' field is the sum of sleep
- * and wake-up latencies.
-
-    ---------------------------------------------
-   | state |  exit_latency  |  target_residency  |
-    ---------------------------------------------
-   |  C1   |    110 + 162   |            5       |
-   |  C2   |    106 + 180   |          309       |
-   |  C3   |    107 + 410   |        46057       |
-   |  C4   |    121 + 3374  |        46057       |
-   |  C5   |    855 + 1146  |        46057       |
-   |  C6   |   7580 + 4134  |       484329       |
-   |  C7   |   7505 + 15274 |       484329       |
-    ---------------------------------------------
-
-*/
-
-extern void __init rx51_peripherals_init(void);
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type		= MUSB_INTERFACE_ULPI,
-	.mode			= MUSB_OTG,
-	.power			= 0,
-};
-
-static void __init rx51_init(void)
-{
-	struct omap_sdrc_params *sdrc_params;
-
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	omap_serial_init();
-
-	sdrc_params = nokia_get_sdram_timings();
-	omap_sdrc_init(sdrc_params, sdrc_params);
-
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(&musb_board_data);
-	rx51_peripherals_init();
-
-	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-#ifdef CONFIG_ARM_ERRATA_430973
-		pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
-		/* set IBE to 1 */
-		rx51_secure_update_aux_cr(BIT(6), 0);
-#endif
-	}
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	platform_device_register(&leds_gpio);
-}
-
-static void __init rx51_reserve(void)
-{
-	omap_reserve();
-}
-
-MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
-	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.atag_offset	= 0x100,
-	.reserve	= rx51_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= rx51_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap_init_time,
-	.restart	= omap3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h
deleted file mode 100644
index b76f49e..0000000
--- a/arch/arm/mach-omap2/board-rx51.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Defines for rx51 boards
- */
-
-#ifndef _OMAP_BOARD_RX51_H
-#define _OMAP_BOARD_RX51_H
-
-extern void __init rx51_peripherals_init(void);
-extern void __init rx51_video_mem_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index c073fb5..6f2d0ae 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
 				CLKCTRL_IDLEST_DISABLED),
 				MAX_MODULE_READY_TIME, i);
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 2c0e07e..2ab27ad 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
 			  MAX_MODULE_READY_TIME, i);
 
@@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
 {
 	int i = 0;
 
-	if (!clkctrl_offs)
-		return 0;
-
 	omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
 			   CLKCTRL_IDLEST_DISABLED),
 			  MAX_MODULE_DISABLE_TIME, i);
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index d246efd..5388fcd 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -29,8 +29,7 @@
 #include "common.h"
 #include "common-board-devices.h"
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d7f1d69..60a20f3 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -67,7 +67,7 @@ omap_postcore_initcall(omap3_l3_init);
 
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP24XX)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -163,9 +163,8 @@ static void __init omap_init_aes(void)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
-	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_OMAP2_VOUT)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
 };
 #else
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index facd740..44fef96 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -28,7 +28,7 @@
 #include "soc.h"
 #include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_DRM_OMAP)
 
 static struct omap_drm_platform_data platform_data;
 
diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c
index 1f1ecf8..ecd00b6 100644
--- a/arch/arm/mach-omap2/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -90,7 +90,7 @@ int __init omap_init_vrfb(void)
 int __init omap_init_vrfb(void) { return 0; }
 #endif
 
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 static struct omapfb_platform_data omapfb_config;
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
index ea6c9c8..99a05b8 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.h
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.h
@@ -21,7 +21,7 @@ struct omap_smsc911x_platform_data {
 	u32	flags;
 };
 
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 
 extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index cff079e..4780977 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -26,7 +26,7 @@
 #include "hsmmc.h"
 #include "control.h"
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 148cd9b..69b619d 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -28,7 +28,7 @@ struct omap2_hsmmc_info {
 	void (*init_card)(struct mmc_card *card);
 };
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 void omap_hsmmc_init(struct omap2_hsmmc_info *);
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 0c47543..369f95a 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -322,34 +322,25 @@ static void irq_save_secure_context(void)
 #endif
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int irq_cpu_hotplug_notify(struct notifier_block *self,
-				  unsigned long action, void *hcpu)
+static int omap_wakeupgen_cpu_online(unsigned int cpu)
 {
-	unsigned int cpu = (unsigned int)hcpu;
-
-	/*
-	 * Corresponding FROZEN transitions do not have to be handled,
-	 * they are handled by at a higher level
-	 * (drivers/cpuidle/coupled.c).
-	 */
-	switch (action) {
-	case CPU_ONLINE:
-		wakeupgen_irqmask_all(cpu, 0);
-		break;
-	case CPU_DEAD:
-		wakeupgen_irqmask_all(cpu, 1);
-		break;
-	}
-	return NOTIFY_OK;
+	wakeupgen_irqmask_all(cpu, 0);
+	return 0;
 }
 
-static struct notifier_block irq_hotplug_notifier = {
-	.notifier_call = irq_cpu_hotplug_notify,
-};
+static int omap_wakeupgen_cpu_dead(unsigned int cpu)
+{
+	wakeupgen_irqmask_all(cpu, 1);
+	return 0;
+}
 
 static void __init irq_hotplug_init(void)
 {
-	register_hotcpu_notifier(&irq_hotplug_notifier);
+	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "arm/omap-wake:online",
+				  omap_wakeupgen_cpu_online, NULL);
+	cpuhp_setup_state_nocalls(CPUHP_ARM_OMAP_WAKE_DEAD,
+				  "arm/omap-wake:dead", NULL,
+				  omap_wakeupgen_cpu_dead);
 }
 #else
 static void __init irq_hotplug_init(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5b70938..1052b29 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
 					oh->clkdm->cm_inst,
 					oh->prcm.omap4.clkctrl_offs, 0);
@@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
 	if (!_find_mpu_rt_port(oh))
 		return 0;
 
+	if (!oh->prcm.omap4.clkctrl_offs &&
+	    !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
+		return 0;
+
 	/* XXX check module SIDLEMODE, hardreset status */
 
 	return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 4041bad..7890401 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
  * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
  *     module-level context loss register associated with them; this
  *     flag bit should be set in those cases
+ * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
+ *	offset of zero; this flag bit should be set in those cases to
+ *	distinguish from hwmods that have no clkctrl offset.
  */
 #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT		(1 << 0)
+#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET		(1 << 1)
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 55c5878..e2d84aa 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -29,6 +29,7 @@
 #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl))
 #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl))
 #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst))
+#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag))
 
 /*
  * 'l3' class
@@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void)
 	CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET);
+	PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET);
 	CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET);
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index d72ee61..1cc4a6f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
  * display serial interface controller
  */
 
+static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
 	.name = "dsi",
+	.sysc	= &omap3xxx_dsi_sysc,
 };
 
 static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 292eca0..a72738e 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -532,8 +532,7 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 }
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE)
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
 #include <linux/platform_data/omap-twl4030.h>
 
 /* Commonly used configuration */
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 058994e..0491076 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -105,9 +105,9 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq)
+void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
 {
-	orion_ge00_switch_init(d, irq);
+	orion_ge00_switch_init(d);
 }
 
 
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index cd0389c..8a4115b 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq);
+void orion5x_eth_switch_init(struct dsa_platform_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index c742e7b..dccadf6 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -101,7 +101,7 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = {
+static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &rd88f5181l_fxo_switch_chip_data,
 };
@@ -120,7 +120,7 @@ static void __init rd88f5181l_fxo_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 7e977b7..affe5ec 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -102,7 +102,7 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
 	.port_names[7]	= "lan3",
 };
 
-static struct dsa_platform_data rd88f5181l_ge_switch_plat_data = {
+static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &rd88f5181l_ge_switch_chip_data,
 };
@@ -125,8 +125,7 @@ static void __init rd88f5181l_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data,
-				gpio_to_irq(8));
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 4bf80dd..67ee857 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -40,7 +40,7 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
 	.port_names[5]	= "cpu",
 };
 
-static struct dsa_platform_data rd88f6183ap_ge_switch_plat_data = {
+static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &rd88f6183ap_ge_switch_chip_data,
 };
@@ -71,7 +71,6 @@ static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
-		.irq		= NO_IRQ,
 		.max_speed_hz	= 20000000,
 		.bus_num	= 0,
 		.chip_select	= 0,
@@ -90,8 +89,7 @@ static void __init rd88f6183ap_ge_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data,
-				gpio_to_irq(3));
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
 	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
 				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
 	orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 4e1e5c8..4dbcdbe 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -106,7 +106,7 @@ static struct dsa_chip_data wnr854t_switch_chip_data = {
 	.port_names[7] = "lan2",
 };
 
-static struct dsa_platform_data wnr854t_switch_plat_data = {
+static struct dsa_platform_data __initdata wnr854t_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &wnr854t_switch_chip_data,
 };
@@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
+	orion5x_eth_switch_init(&wnr854t_switch_plat_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 61e9027..a6a8c46 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -191,7 +191,7 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
 	.port_names[7]	= "lan4",
 };
 
-static struct dsa_platform_data wrt350n_v2_switch_plat_data = {
+static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
 	.nr_chips	= 1,
 	.chip		= &wrt350n_v2_switch_chip_data,
 };
@@ -210,7 +210,7 @@ static void __init wrt350n_v2_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
 	orion5x_uart0_init();
 
 	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index cd894d6..76fbc11 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -4,6 +4,17 @@ menu "Intel PXA2xx/PXA3xx Implementations"
 
 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
+config MACH_PXA25X_DT
+	bool "Support PXA25x platforms from device tree"
+	select PINCTRL
+	select POWER_SUPPLY
+	select PXA25x
+	select USE_OF
+	help
+	  Include support for Marvell PXA25x based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_PXA25x_DT is enabled.
+
 config MACH_PXA27X_DT
 	bool "Support PXA27x platforms from device tree"
 	select PINCTRL
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 2ceed40..ef25dc5 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,8 +19,9 @@ obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 # NOTE: keep the order of boards in accordance to their order in Kconfig
 
 # Device Tree support
-obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
+obj-$(CONFIG_MACH_PXA25X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA27X_DT)	+= pxa-dt.o
+obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
 
 # Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index d920681..c71c483 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -131,16 +131,11 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
 	return is_resume;
 }
 
-static unsigned long corgi_charger_wakeup(void)
+static bool corgi_charger_wakeup(void)
 {
-	unsigned long ret;
-
-	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
-		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
-		<< GPIO_bit(CORGI_GPIO_KEY_INT))
-		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
-		<< GPIO_bit(CORGI_GPIO_WAKEUP));
-	return ret;
+	return !gpio_get_value(CORGI_GPIO_AC_IN) ||
+		!gpio_get_value(CORGI_GPIO_KEY_INT) ||
+		!gpio_get_value(CORGI_GPIO_WAKEUP);
 }
 
 unsigned long corgipm_read_devdata(int type)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 4a13c32..04580c4 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -54,3 +54,4 @@ extern struct platform_device pxa3xx_device_gpio;
 extern struct platform_device pxa93x_device_gpio;
 
 void __init pxa_register_device(struct platform_device *dev, void *data);
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 0b1dbb5..75e3f61 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -33,14 +33,12 @@ extern void __init pxa26x_init_irq(void);
 
 #define pxa27x_handle_irq ichp_handle_irq
 extern int __init pxa27x_clocks_init(void);
-extern void __init pxa27x_dt_init_irq(void);
 extern unsigned	pxa27x_get_clk_frequency_khz(int);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa27x_map_io(void);
 
 #define pxa3xx_handle_irq ichp_handle_irq
 extern int __init pxa3xx_clocks_init(void);
-extern void __init pxa3xx_dt_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
 extern void __init pxa3xx_map_io(void);
 
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 4a2f9ab..66184f5 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -24,10 +24,10 @@
 #include <linux/input.h>
 #include <linux/input/navpoint.h>
 #include <linux/lcd.h>
-#include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/asic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/platform_data/gpio-htc-egpio.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
index 5bd5589..20026bd 100644
--- a/arch/arm/mach-pxa/include/mach/dma.h
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -17,5 +17,4 @@
 /* DMA Controller Registers Definitions */
 #define DMAC_REGS_VIRT	io_p2v(0x40000000)
 
-#include <plat/dma.h>
 #endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7245f33..d6159f8 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
+static void lubbock_init_pcmcia(void)
+{
+	struct clk *clk;
+
+	/* Add an alias for the SA1111 PCMCIA clock */
+	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
+	if (!IS_ERR(clk)) {
+		clkdev_create(clk, NULL, "1800");
+		clk_put(clk);
+	}
+}
+
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -467,6 +479,8 @@ static void __init lubbock_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
+	lubbock_init_pcmcia();
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_fb_info(NULL, &sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index abc9181..b413e36 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -20,10 +20,10 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/platform_data/gpio-htc-egpio.h>
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
@@ -121,10 +121,6 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO107_GPIO,	/* DS1WM_IRQ */
 	GPIO108_GPIO,	/* GSM_READY */
 	GPIO115_GPIO,	/* nPEN_IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
 };
 
 /*
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 388463b..e7450fb 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -104,8 +104,9 @@ static int __init pxa_pm_init(void)
 		return -EINVAL;
 	}
 
-	sleep_save = kmalloc(pxa_cpu_pm_fns->save_count * sizeof(unsigned long),
-			     GFP_KERNEL);
+	sleep_save = kmalloc_array(pxa_cpu_pm_fns->save_count,
+				   sizeof(*sleep_save),
+				   GFP_KERNEL);
 	if (!sleep_save) {
 		printk(KERN_ERR "failed to alloc memory for pm save\n");
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index f128133a..aa9b255 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -18,20 +18,16 @@
 
 #include "generic.h"
 
-#ifdef CONFIG_PXA3xx
-static const char *const pxa3xx_dt_board_compat[] __initconst = {
-	"marvell,pxa300",
-	"marvell,pxa310",
-	"marvell,pxa320",
+#ifdef CONFIG_PXA25x
+static const char * const pxa25x_dt_board_compat[] __initconst = {
+	"marvell,pxa250",
 	NULL,
 };
 
-DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
-	.map_io		= pxa3xx_map_io,
-	.init_irq	= pxa3xx_dt_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
+DT_MACHINE_START(PXA25X_DT, "Marvell PXA25x (Device Tree Support)")
+	.map_io		= pxa25x_map_io,
 	.restart	= pxa_restart,
-	.dt_compat	= pxa3xx_dt_board_compat,
+	.dt_compat	= pxa25x_dt_board_compat,
 MACHINE_END
 #endif
 
@@ -41,11 +37,24 @@ static const char * const pxa27x_dt_board_compat[] __initconst = {
 	NULL,
 };
 
-DT_MACHINE_START(PXA27X_DT, "Marvell PXA2xx (Device Tree Support)")
+DT_MACHINE_START(PXA27X_DT, "Marvell PXA27x (Device Tree Support)")
 	.map_io		= pxa27x_map_io,
-	.init_irq	= pxa27x_dt_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
 	.restart	= pxa_restart,
 	.dt_compat	= pxa27x_dt_board_compat,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_PXA3xx
+static const char *const pxa3xx_dt_board_compat[] __initconst = {
+	"marvell,pxa300",
+	"marvell,pxa310",
+	"marvell,pxa320",
+	NULL,
+};
+
+DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
+	.map_io		= pxa3xx_map_io,
+	.restart	= pxa_restart,
+	.dt_compat	= pxa3xx_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 823504f..12b9435 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -25,6 +25,7 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -151,6 +152,16 @@ void __init pxa26x_init_irq(void)
 }
 #endif
 
+static int __init __init
+pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
+{
+	pxa_dt_irq_init(pxa25x_set_wake);
+	set_handle_irq(ichp_handle_irq);
+
+	return 0;
+}
+IRQCHIP_DECLARE(pxa25x_intc, "marvell,pxa-intc", pxa25x_dt_init_irq);
+
 static struct map_desc pxa25x_io_desc[] __initdata = {
 	{	/* Mem Ctl */
 		.virtual	= (unsigned long)SMEMC_VIRT,
@@ -198,20 +209,17 @@ static int __init pxa25x_init(void)
 
 		reset_status = RCSR;
 
-		if ((ret = pxa_init_dma(IRQ_DMA, 16)))
-			return ret;
-
 		pxa25x_init_pm();
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
-		pxa2xx_set_dmac_info(16, 40);
-		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
-		ret = platform_add_devices(pxa25x_devices,
-					   ARRAY_SIZE(pxa25x_devices));
-		if (ret)
-			return ret;
+		if (!of_have_populated_dt()) {
+			pxa2xx_set_dmac_info(16, 40);
+			pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
+			ret = platform_add_devices(pxa25x_devices,
+						   ARRAY_SIZE(pxa25x_devices));
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2eaa341..c0185c5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -233,11 +234,15 @@ void __init pxa27x_init_irq(void)
 	pxa_init_irq(34, pxa27x_set_wake);
 }
 
-void __init pxa27x_dt_init_irq(void)
+static int __init
+pxa27x_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
-	if (IS_ENABLED(CONFIG_OF))
-		pxa_dt_irq_init(pxa27x_set_wake);
+	pxa_dt_irq_init(pxa27x_set_wake);
+	set_handle_irq(ichp_handle_irq);
+
+	return 0;
 }
+IRQCHIP_DECLARE(pxa27x_intc, "marvell,pxa-intc", pxa27x_dt_init_irq);
 
 static struct map_desc pxa27x_io_desc[] __initdata = {
 	{	/* Mem Ctl */
@@ -300,9 +305,6 @@ static int __init pxa27x_init(void)
 
 		reset_status = RCSR;
 
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
 		pxa27x_init_pm();
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 3c9184d..87acc96 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/syscore_ops.h>
@@ -356,11 +357,16 @@ void __init pxa3xx_init_irq(void)
 }
 
 #ifdef CONFIG_OF
-void __init pxa3xx_dt_init_irq(void)
+static int __init __init
+pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
 	__pxa3xx_init_irq();
 	pxa_dt_irq_init(pxa3xx_set_wake);
+	set_handle_irq(ichp_handle_irq);
+
+	return 0;
 }
+IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
 #endif	/* CONFIG_OF */
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
@@ -438,9 +444,6 @@ static int __init pxa3xx_init(void)
 		 */
 		NDCR = (NDCR & ~NDCR_ND_ARB_EN) | NDCR_ND_ARB_CNTL;
 
-		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
-			return ret;
-
 		pxa3xx_init_pm();
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
index 2385052..e362f86 100644
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -41,30 +41,35 @@ static irqreturn_t cplds_irq_handler(int in_irq, void *d)
 	unsigned long pending;
 	unsigned int bit;
 
-	pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
-	for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
-		generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+	do {
+		pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+		for_each_set_bit(bit, &pending, CPLDS_NB_IRQ) {
+			generic_handle_irq(irq_find_mapping(fpga->irqdomain,
+							    bit));
+		}
+	} while (pending);
 
 	return IRQ_HANDLED;
 }
 
-static void cplds_irq_mask_ack(struct irq_data *d)
+static void cplds_irq_mask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int set, bit = BIT(cplds_irq);
+	unsigned int bit = BIT(cplds_irq);
 
 	fpga->irq_mask &= ~bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
-	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 }
 
 static void cplds_irq_unmask(struct irq_data *d)
 {
 	struct cplds *fpga = irq_data_get_irq_chip_data(d);
 	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int bit = BIT(cplds_irq);
+	unsigned int set, bit = BIT(cplds_irq);
+
+	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
 
 	fpga->irq_mask |= bit;
 	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
@@ -72,7 +77,8 @@ static void cplds_irq_unmask(struct irq_data *d)
 
 static struct irq_chip cplds_irq_chip = {
 	.name		= "pxa_cplds",
-	.irq_mask_ack	= cplds_irq_mask_ack,
+	.irq_ack	= cplds_irq_mask,
+	.irq_mask	= cplds_irq_mask,
 	.irq_unmask	= cplds_irq_unmask,
 	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
 };
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index b80eab9..249b7bd 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -744,7 +744,7 @@ static int sharpsl_off_charge_battery(void)
 		time = RCNR;
 		while (1) {
 			/* Check if any wakeup event had occurred */
-			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+			if (sharpsl_pm.machinfo->charger_wakeup())
 				return 0;
 			/* Check for timeout */
 			if ((RCNR - time) > SHARPSL_WAIT_CO_TIME)
diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index 905be67..fa75b6d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -34,7 +34,7 @@ struct sharpsl_charger_machinfo {
 #define SHARPSL_STATUS_LOCK     5
 #define SHARPSL_STATUS_CHRGFULL 6
 #define SHARPSL_STATUS_FATAL    7
-	unsigned long (*charger_wakeup)(void);
+	bool (*charger_wakeup)(void);
 	int (*should_wakeup)(unsigned int resume_on_alarm);
 	void (*backlight_limit)(int);
 	int (*backlight_get_status) (void);
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index ea9f903..4e64a14 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -165,13 +165,10 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 	return is_resume;
 }
 
-static unsigned long spitz_charger_wakeup(void)
+static bool spitz_charger_wakeup(void)
 {
-	unsigned long ret;
-	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
-		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| gpio_get_value(SPITZ_GPIO_SYNC));
-	return ret;
+	return !gpio_get_value(SPITZ_GPIO_KEY_INT) ||
+		gpio_get_value(SPITZ_GPIO_SYNC);
 }
 
 unsigned long spitzpm_read_devdata(int type)
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
index e324375..12878e9 100644
--- a/arch/arm/mach-qcom/Makefile
+++ b/arch/arm/mach-qcom/Makefile
@@ -1,2 +1 @@
-obj-y			:= board.o
 obj-$(CONFIG_SMP)	+= platsmp.o
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 70ab4a2..1d7c83e 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -2,34 +2,29 @@ menuconfig ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
+	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CLK_SP810
 	select COMMON_CLK_VERSATILE
 	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config REALVIEW_DT
-	bool "Support RealView(R) Device Tree based boot"
-	select ARM_GIC
-	select CLK_SP810
-	select HAVE_SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select HAVE_TCM
 	select ICST
 	select MACH_REALVIEW_EB if ARCH_MULTI_V5
 	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
-	select SMP_ON_UP if SMP
 	select SOC_REALVIEW
 	select USE_OF
 	help
-	  Include support for booting the ARM(R) RealView(R) evaluation
-	  boards using a device tree machine description.
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
 
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
@@ -60,8 +55,6 @@ config REALVIEW_EB_ARM1176
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -71,30 +64,15 @@ config REALVIEW_EB_A9MP
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
-	help
-	  Enable support for the ARM11MPCore Revision B tile on the
-	  Realview(R) Emulation Baseboard platform. Since there are device
-	  address differences, a kernel built with this option enabled is
-	  not compatible with other revisions of the ARM11MPCore tile.
-
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -106,7 +84,6 @@ config MACH_REALVIEW_PB11MP
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
 	select MIGHT_HAVE_CACHE_L2X0
@@ -114,20 +91,9 @@ config MACH_REALVIEW_PB1176
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
 
-config REALVIEW_PB1176_SECURE_FLASH
-	bool "Allow access to the secure flash memory block"
-	depends on MACH_REALVIEW_PB1176
-	default n
-	help
-	  Select this option if Linux will only run in secure mode on the
-	  RealView PB1176 platform and access to the secure flash memory
-	  block (64MB @ 0x3c000000) is required.
-
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
 	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
@@ -136,10 +102,6 @@ config MACH_REALVIEW_PBA8
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ZONE_DMA
@@ -147,16 +109,4 @@ config MACH_REALVIEW_PBX
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
 	  Explore.
 
-config REALVIEW_HIGH_PHYS_OFFSET
-	bool "High physical base address for the RealView platform"
-	depends on MMU && !MACH_REALVIEW_PB1176
-	default y
-	help
-	  RealView boards other than PB1176 have the RAM available at
-	  0x70000000, 256MB of which being mirrored at 0x00000000. If
-	  the board supports 512MB of RAM, this option allows the
-	  memory to be accessed contiguously at the high physical
-	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with HIGHMEM.
-
 endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 4048821..adf39ad 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -3,16 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= core.o
-obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
+obj-y					+= realview-dt.o
 obj-$(CONFIG_SMP)			+= platsmp-dt.o
-
-ifdef CONFIG_ATAGS
-obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
-obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
-obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
-obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-endif
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h
deleted file mode 100644
index a850ae6..0000000
--- a/arch/arm/mach-realview/board-eb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include "platform.h"
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x10100000
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
-#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
-
-#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
-#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-#define REALVIEW_EB_PROC_A9MP		0x0C000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#ifdef CONFIG_REALVIEW_EB_A9MP
-#define core_tile_a9mp()	check_eb_proc(REALVIEW_EB_PROC_A9MP)
-#else
-#define core_tile_a9mp()	0
-#endif
-
-#define machine_is_realview_eb_mp() \
-	(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
deleted file mode 100644
index 29c04a9..0000000
--- a/arch/arm/mach-realview/board-pb1176.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
-#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_DC1176_ROM_BASE		0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
- */
-#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
deleted file mode 100644
index b16e6e85..0000000
--- a/arch/arm/mach-realview/board-pb11mp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
-#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000600
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
- /*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
deleted file mode 100644
index 6a1391f..0000000
--- a/arch/arm/mach-realview/board-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PBA8_H
-#define __ASM_ARCH_BOARD_PBA8_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBA8_FLASH0_BASE		0x40000000
-#define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBA8_FLASH1_BASE		0x44000000
-#define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74
-
-/*
- * PBA8 PCI regions
- */
-#define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-#endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
deleted file mode 100644
index 5cda480..0000000
--- a/arch/arm/mach-realview/board-pbx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_BOARD_PBX_H
-#define __ASM_ARCH_BOARD_PBX_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
-#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
-#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
-#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
-#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_FLASH0_BASE		0x40000000
-#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBX_FLASH1_BASE		0x44000000
-#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-/*
- * Tile-specific addresses
- */
-#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
-#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
-#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
-#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
-#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
-#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
-
-#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
-
-/*
- * PBX PCI regions
- */
-#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_PBX_PROC_MASK          0xFF000000
-#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
-#define REALVIEW_PBX_PROC_ARM9          0x02000000
-#define REALVIEW_PBX_PROC_ARM11         0x04000000
-#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
-#define REALVIEW_PBX_PROC_A9MP          0x0C000000
-#define REALVIEW_PBX_PROC_A8            0x0E000000
-
-#define check_pbx_proc(proc_type)                                            \
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
-	== proc_type)
-
-#ifdef CONFIG_MACH_REALVIEW_PBX
-#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
-#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
-#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
-#else
-#define core_tile_pbx11mp()     0
-#define core_tile_pbxa9mp()     0
-#define core_tile_pbxa8()       0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
deleted file mode 100644
index a0ead0a..0000000
--- a/arch/arm/mach-realview/core.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/smc91x.h>
-#include <linux/ata_platform.h>
-#include <linux/amba/mmci.h>
-#include <linux/gfp.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memblock.h>
-
-#include <clocksource/timer-sp804.h>
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "platform.h"
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-
-static void realview_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(REALVIEW_FLASHCTRL);
-	if (on)
-		val |= REALVIEW_FLASHPROG_FLVPPEN;
-	else
-		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
-	__raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static struct physmap_flash_data realview_flash_data = {
-	.width			= 4,
-	.set_vpp		= realview_flash_set_vpp,
-};
-
-struct platform_device realview_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &realview_flash_data,
-	},
-};
-
-int realview_flash_register(struct resource *res, u32 num)
-{
-	realview_flash_device.resource = res;
-	realview_flash_device.num_resources = num;
-	return platform_device_register(&realview_flash_device);
-}
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		 SMC91X_NOWAIT,
-};
-
-static struct platform_device realview_eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.num_resources	= 2,
-};
-
-int realview_eth_register(const char *name, struct resource *res)
-{
-	if (name)
-		realview_eth_device.name = name;
-	realview_eth_device.resource = res;
-	if (strcmp(realview_eth_device.name, "smsc911x") == 0)
-		realview_eth_device.dev.platform_data = &smsc911x_config;
-	else
-		realview_eth_device.dev.platform_data = &smc91x_platdata;
-
-	return platform_device_register(&realview_eth_device);
-}
-
-struct platform_device realview_usb_device = {
-	.name			= "isp1760",
-	.num_resources		= 2,
-};
-
-int realview_usb_register(struct resource *res)
-{
-	realview_usb_device.resource = res;
-	return platform_device_register(&realview_usb_device);
-}
-
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift		= 1,
-};
-
-static struct resource pata_resources[] = {
-	[0] = {
-		.start		= REALVIEW_CF_BASE,
-		.end		= REALVIEW_CF_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_CF_BASE + 0x100,
-		.end		= REALVIEW_CF_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_cf_device = {
-	.name			= "pata_platform",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pata_resources),
-	.resource		= pata_resources,
-	.dev			= {
-		.platform_data	= &pata_platform_data,
-	},
-};
-
-static struct resource realview_leds_resources[] = {
-	{
-		.start	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET,
-		.end	= REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device realview_leds_device = {
-	.name		= "versatile-leds",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(realview_leds_resources),
-	.resource	= realview_leds_resources,
-};
-
-static struct resource realview_i2c_resource = {
-	.start		= REALVIEW_I2C_BASE,
-	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device realview_i2c_device = {
-	.name		= "versatile-i2c",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &realview_i2c_resource,
-};
-
-static struct i2c_board_info realview_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init realview_i2c_init(void)
-{
-	return i2c_register_board_info(0, realview_i2c_board_info,
-				       ARRAY_SIZE(realview_i2c_board_info));
-}
-arch_initcall(realview_i2c_init);
-
-#define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
-
-/*
- * This is only used if GPIOLIB support is disabled
- */
-static unsigned int realview_mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (machine_is_realview_pb1176()) {
-		static bool inserted = false;
-
-		/*
-		 * The PB1176 does not have the status register,
-		 * assume it is inserted at startup, then invert
-		 * for each call so card insertion/removal will
-		 * be detected anyway. This will not be called if
-		 * GPIO on PL061 is active, which is the proper
-		 * way to do this on the PB1176.
-		 */
-		inserted = !inserted;
-		return inserted ? 0 : 1;
-	}
-
-	if (adev->res.start == REALVIEW_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(REALVIEW_SYSMCI) & mask;
-}
-
-struct mmci_platform_data realview_mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 17,
-	.gpio_cd	= 16,
-	.cd_invert	= true,
-};
-
-struct mmci_platform_data realview_mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= realview_mmc_status,
-	.gpio_wp	= 19,
-	.gpio_cd	= 18,
-	.cd_invert	= true,
-};
-
-void __init realview_init_early(void)
-{
-	void __iomem *sys = __io_address(REALVIEW_SYS_BASE);
-
-	versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000);
-}
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void realview_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void realview_clcd_enable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	u32 val;
-
-	/*
-	 * Enable the PSUs
-	 */
-	val = readl(sys_clcd);
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int realview_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
-	const char *panel_name, *vga_panel_name;
-	unsigned long framesize;
-	u32 val;
-
-	if (machine_is_realview_eb()) {
-		/* VGA, 16bpp */
-		framesize = 640 * 480 * 2;
-		vga_panel_name = "VGA";
-	} else {
-		/* XVGA, 16bpp */
-		framesize = 1024 * 768 * 2;
-		vga_panel_name = "XVGA";
-	}
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5)
-		panel_name = "Sanyo QVGA Portrait";
-	else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = vga_panel_name;
-	else {
-		pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val);
-		panel_name = vga_panel_name;
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, framesize);
-}
-
-struct clcd_board clcd_plat_data = {
-	.name		= "RealView",
-	.caps		= CLCD_CAP_ALL,
-	.check		= clcdfb_check,
-	.decode		= clcdfb_decode,
-	.disable	= realview_clcd_disable,
-	.enable		= realview_clcd_enable,
-	.setup		= realview_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-/*
- * Where is the timer (VA)?
- */
-void __iomem *timer0_va_base;
-void __iomem *timer1_va_base;
-void __iomem *timer2_va_base;
-void __iomem *timer3_va_base;
-
-/*
- * Set up the clock source and clock events devices
- */
-void __init realview_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-
-	/* 
-	 * set clock frequency: 
-	 *	REALVIEW_REFCLK is 32KHz
-	 *	REALVIEW_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(REALVIEW_SCTL_BASE));
-	writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
-	       (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
-	       __io_address(REALVIEW_SCTL_BASE));
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	sp804_timer_disable(timer0_va_base);
-	sp804_timer_disable(timer1_va_base);
-	sp804_timer_disable(timer2_va_base);
-	sp804_timer_disable(timer3_va_base);
-
-	sp804_clocksource_init(timer3_va_base, "timer3");
-	sp804_clockevents_init(timer0_va_base, timer_irq, "timer0");
-}
-
-/*
- * Setup the memory banks.
- */
-void realview_fixup(struct tag *tags, char **from)
-{
-	/*
-	 * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
-	 * Half of this is mirrored at 0.
-	 */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-	memblock_add(0x70000000, SZ_512M);
-#else
-	memblock_add(0, SZ_256M);
-#endif
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
deleted file mode 100644
index 05a995e..0000000
--- a/arch/arm/mach-realview/core.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_REALVIEW_H
-#define __ASM_ARCH_REALVIEW_H
-
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-
-#define APB_DEVICE(name, busid, base, plat)			\
-static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)			\
-static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
-
-struct machine_desc;
-
-extern struct platform_device realview_flash_device;
-extern struct platform_device realview_cf_device;
-extern struct platform_device realview_leds_device;
-extern struct platform_device realview_i2c_device;
-extern struct mmci_platform_data realview_mmc0_plat_data;
-extern struct mmci_platform_data realview_mmc1_plat_data;
-extern struct clcd_board clcd_plat_data;
-extern void __iomem *timer0_va_base;
-extern void __iomem *timer1_va_base;
-extern void __iomem *timer2_va_base;
-extern void __iomem *timer3_va_base;
-
-extern void realview_timer_init(unsigned int timer_irq);
-extern int realview_flash_register(struct resource *res, u32 num);
-extern int realview_eth_register(const char *name, struct resource *res);
-extern int realview_usb_register(struct resource *res);
-extern void realview_init_early(void);
-extern void realview_fixup(struct tag *tags, char **from);
-
-extern const struct smp_operations realview_smp_ops;
-extern void realview_cpu_die(unsigned int cpu);
-
-#endif
diff --git a/arch/arm/mach-realview/hardware.h b/arch/arm/mach-realview/hardware.h
deleted file mode 100644
index 957a230..0000000
--- a/arch/arm/mach-realview/hardware.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  This file contains the hardware definitions of the RealView boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
-/*
- * Statically mapped addresses:
- *
- * 10xx xxxx -> fbxx xxxx
- * 1exx xxxx -> fdxx xxxx
- * 1fxx xxxx -> fexx xxxx
- */
-#define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
-#else
-#define IO_ADDRESS(x)		(x)
-#endif
-#define __io_address(n)		IOMEM(IO_ADDRESS(n))
-
-#endif
diff --git a/arch/arm/mach-realview/hotplug.h b/arch/arm/mach-realview/hotplug.h
new file mode 100644
index 0000000..eacd7a4
--- /dev/null
+++ b/arch/arm/mach-realview/hotplug.h
@@ -0,0 +1 @@
+void realview_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-realview/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h
deleted file mode 100644
index 61e3168..0000000
--- a/arch/arm/mach-realview/irqs-eb.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_EB_H
-#define __MACH_IRQS_EB_H
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_EB_GIC_START	32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
-#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
-#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
-#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
-#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
-#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
-#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
-#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
-#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
-#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
-#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
-#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
-#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
-#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
-#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
-#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
-#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
-#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
-#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
-#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
-#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
-#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
-#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
-#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
-#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
-#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
-#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
-
-/*
- * The 11MPcore tile leaves the following unconnected.
- */
-#define IRQ_EB11MP_UART2	0
-#define IRQ_EB11MP_UART3	0
-#define IRQ_EB11MP_CLCD		0
-#define IRQ_EB11MP_DMA		0
-#define IRQ_EB11MP_WDOG		0
-#define IRQ_EB11MP_GPIO0	0
-#define IRQ_EB11MP_GPIO1	0
-#define IRQ_EB11MP_GPIO2	0
-#define IRQ_EB11MP_SCI		0
-#define IRQ_EB11MP_SSP		0
-
-#define NR_GIC_EB11MP		2
-
-#endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h
deleted file mode 100644
index 778edfd..0000000
--- a/arch/arm/mach-realview/irqs-pb1176.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB1176_H
-#define __MACH_IRQS_PB1176_H
-
-#define IRQ_DC1176_GIC_START			32
-#define IRQ_PB1176_GIC_START			64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
-#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
-#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
-#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
-#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
-#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
-#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
-#define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
-#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
-#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
-#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
-#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
-#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
-#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
-#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
-
-#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
-
-#define IRQ_PB1176_SCTL		-1
-
-#endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h
deleted file mode 100644
index 938898a..0000000
--- a/arch/arm/mach-realview/irqs-pb11mp.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PB11MP_H
-#define __MACH_IRQS_PB11MP_H
-
-#define IRQ_LOCALTIMER				29
-#define IRQ_TC11MP_GIC_START			32
-#define IRQ_PB11MP_GIC_START			64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
-#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
-#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
-#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
-#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
-#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
-#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
-#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
-
-#endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h
deleted file mode 100644
index 262e321..0000000
--- a/arch/arm/mach-realview/irqs-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_IRQS_PBA8_H
-#define __MACH_IRQS_PBA8_H
-
-#define IRQ_PBA8_GIC_START			32
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
-#define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
-#define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
-
-/* ... */
-#define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC		-1
-#define IRQ_PBA8_SCTL		-1
-
-#endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h
deleted file mode 100644
index 4ef0567..0000000
--- a/arch/arm/mach-realview/irqs-pbx.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __MACH_IRQS_PBX_H
-#define __MACH_IRQS_PBX_H
-
-#define IRQ_LOCALTIMER				29
-#define IRQ_PBX_GIC_START			32
-
-/*
- * PBX on-board gic irq sources
- */
-#define IRQ_PBX_WATCHDOG	(IRQ_PBX_GIC_START + 0)	/* Watchdog timer */
-#define IRQ_PBX_SOFT		(IRQ_PBX_GIC_START + 1)	/* Software interrupt */
-#define IRQ_PBX_COMMRx		(IRQ_PBX_GIC_START + 2)	/* Debug Comm Rx interrupt */
-#define IRQ_PBX_COMMTx		(IRQ_PBX_GIC_START + 3)	/* Debug Comm Tx interrupt */
-#define IRQ_PBX_TIMER0_1	(IRQ_PBX_GIC_START + 4)	/* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER2_3	(IRQ_PBX_GIC_START + 5)	/* Timer 2/3 */
-#define IRQ_PBX_GPIO0		(IRQ_PBX_GIC_START + 6)	/* GPIO 0 */
-#define IRQ_PBX_GPIO1		(IRQ_PBX_GIC_START + 7)	/* GPIO 1 */
-#define IRQ_PBX_GPIO2		(IRQ_PBX_GIC_START + 8)	/* GPIO 2 */
-								/* 9 reserved */
-#define IRQ_PBX_RTC		(IRQ_PBX_GIC_START + 10)	/* Real Time Clock */
-#define IRQ_PBX_SSP		(IRQ_PBX_GIC_START + 11)	/* Synchronous Serial Port */
-#define IRQ_PBX_UART0		(IRQ_PBX_GIC_START + 12)	/* UART 0 on development chip */
-#define IRQ_PBX_UART1		(IRQ_PBX_GIC_START + 13)	/* UART 1 on development chip */
-#define IRQ_PBX_UART2		(IRQ_PBX_GIC_START + 14)	/* UART 2 on development chip */
-#define IRQ_PBX_UART3		(IRQ_PBX_GIC_START + 15)	/* UART 3 on development chip */
-#define IRQ_PBX_SCI		(IRQ_PBX_GIC_START + 16)	/* Smart Card Interface */
-#define IRQ_PBX_MMCI0A		(IRQ_PBX_GIC_START + 17)	/* Multimedia Card 0A */
-#define IRQ_PBX_MMCI0B		(IRQ_PBX_GIC_START + 18)	/* Multimedia Card 0B */
-#define IRQ_PBX_AACI		(IRQ_PBX_GIC_START + 19)	/* Audio Codec */
-#define IRQ_PBX_KMI0		(IRQ_PBX_GIC_START + 20)	/* Keyboard/Mouse port 0 */
-#define IRQ_PBX_KMI1		(IRQ_PBX_GIC_START + 21)	/* Keyboard/Mouse port 1 */
-#define IRQ_PBX_CHARLCD		(IRQ_PBX_GIC_START + 22)	/* Character LCD */
-#define IRQ_PBX_CLCD		(IRQ_PBX_GIC_START + 23)	/* CLCD controller */
-#define IRQ_PBX_DMAC		(IRQ_PBX_GIC_START + 24)	/* DMA controller */
-#define IRQ_PBX_PWRFAIL		(IRQ_PBX_GIC_START + 25)	/* Power failure */
-#define IRQ_PBX_PISMO		(IRQ_PBX_GIC_START + 26)	/* PISMO interface */
-#define IRQ_PBX_DoC		(IRQ_PBX_GIC_START + 27)	/* Disk on Chip memory controller */
-#define IRQ_PBX_ETH		(IRQ_PBX_GIC_START + 28)	/* Ethernet controller */
-#define IRQ_PBX_USB		(IRQ_PBX_GIC_START + 29)	/* USB controller */
-#define IRQ_PBX_TSPEN		(IRQ_PBX_GIC_START + 30)	/* Touchscreen pen */
-#define IRQ_PBX_TSKPAD		(IRQ_PBX_GIC_START + 31)	/* Touchscreen keypad */
-
-#define IRQ_PBX_PMU_SCU0        (IRQ_PBX_GIC_START + 32)        /* SCU PMU Interrupts (11mp) */
-#define IRQ_PBX_PMU_SCU1        (IRQ_PBX_GIC_START + 33)
-#define IRQ_PBX_PMU_SCU2        (IRQ_PBX_GIC_START + 34)
-#define IRQ_PBX_PMU_SCU3        (IRQ_PBX_GIC_START + 35)
-#define IRQ_PBX_PMU_SCU4        (IRQ_PBX_GIC_START + 36)
-#define IRQ_PBX_PMU_SCU5        (IRQ_PBX_GIC_START + 37)
-#define IRQ_PBX_PMU_SCU6        (IRQ_PBX_GIC_START + 38)
-#define IRQ_PBX_PMU_SCU7        (IRQ_PBX_GIC_START + 39)
-
-#define IRQ_PBX_WATCHDOG1       (IRQ_PBX_GIC_START + 40)        /* Watchdog1 timer */
-#define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
-#define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
-/* ... */
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
-
-/* ... */
-#define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
-#define IRQ_PBX_PCI1		(IRQ_PBX_GIC_START + 51)
-#define IRQ_PBX_PCI2		(IRQ_PBX_GIC_START + 52)
-#define IRQ_PBX_PCI3		(IRQ_PBX_GIC_START + 53)
-
-#define IRQ_PBX_SMC		-1
-#define IRQ_PBX_SCTL		-1
-
-#endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/platform.h b/arch/arm/mach-realview/platform.h
deleted file mode 100644
index 1112173..0000000
--- a/arch/arm/mach-realview/platform.h
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_PLATFORM_H
-#define __ASM_ARCH_PLATFORM_H
-
-/*
- * Memory definitions
- */
-#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define REALVIEW_BOOT_ROM_HI          0x30000000
-#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
-#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
-
-#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
-#define REALVIEW_SSRAM_SIZE           SZ_2M
-
-/* 
- *  SDRAM
- */
-#define REALVIEW_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  RealView Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define REALVIEW_SYS_ID_OFFSET               0x00
-#define REALVIEW_SYS_SW_OFFSET               0x04
-#define REALVIEW_SYS_LED_OFFSET              0x08
-#define REALVIEW_SYS_OSC0_OFFSET             0x0C
-
-#define REALVIEW_SYS_OSC1_OFFSET             0x10
-#define REALVIEW_SYS_OSC2_OFFSET             0x14
-#define REALVIEW_SYS_OSC3_OFFSET             0x18
-#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
-
-#define REALVIEW_SYS_LOCK_OFFSET             0x20
-#define REALVIEW_SYS_100HZ_OFFSET            0x24
-#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
-#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
-#define REALVIEW_SYS_FLAGS_OFFSET            0x30
-#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
-#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
-#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
-#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
-#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
-#define REALVIEW_SYS_PCICTL_OFFSET           0x44
-#define REALVIEW_SYS_MCI_OFFSET              0x48
-#define REALVIEW_SYS_FLASH_OFFSET            0x4C
-#define REALVIEW_SYS_CLCD_OFFSET             0x50
-#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
-#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
-#define REALVIEW_SYS_24MHz_OFFSET            0x5C
-#define REALVIEW_SYS_MISC_OFFSET             0x60
-#define REALVIEW_SYS_IOSEL_OFFSET            0x70
-#define REALVIEW_SYS_PROCID_OFFSET           0x84
-#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
-#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
-#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
-#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
-#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
-
-#define REALVIEW_SYS_BASE                    0x10000000
-#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
-#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
-#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
-#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
-#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
-
-#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
-#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
-#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
-#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
-#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
-#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
-#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
-#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
-#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
-#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
-#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
-#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
-#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
-#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
-#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
-#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
-#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
-#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
-#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
-#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
-#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
-#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
-#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
-#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
-#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
-#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-
-/* ------------------------------------------------------------------------
- *  RealView control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * REALVIEW_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * REALVIEW_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
-
-/*
- * REALVIEW_SYS_FLASH
- */
-#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * REALVIEW_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * RealView common peripheral addresses
- */
-#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
-#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
-#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
-#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
-#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
-#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
-#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
-#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
-#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
-#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
-
-/* PCI space */
-#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
-#define REALVIEW_PCI_CFG_BASE	      0x42000000
-#define REALVIEW_PCI_MEM_BASE0        0x44000000
-#define REALVIEW_PCI_MEM_BASE1        0x50000000
-#define REALVIEW_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define REALVIEW_PCI_BASE_SIZE	       0x01000000
-#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
-#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * CompactFlash
- */
-#define REALVIEW_CF_BASE		0x18000000	/* CompactFlash */
-#define REALVIEW_CF_MEM_BASE		0x18003000	/* SMC for CompactFlash */
-
-/*
- * Disk on Chip
- */
-#define REALVIEW_DOC_BASE             0x2C000000
-#define REALVIEW_DOC_SIZE             (16 << 20)
-#define REALVIEW_DOC_PAGE_SIZE        512
-#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define REALVIEW_SYS_LED0             (1 << 0)
-#define REALVIEW_SYS_LED1             (1 << 1)
-#define REALVIEW_SYS_LED2             (1 << 2)
-#define REALVIEW_SYS_LED3             (1 << 3)
-#define REALVIEW_SYS_LED4             (1 << 4)
-#define REALVIEW_SYS_LED5             (1 << 5)
-#define REALVIEW_SYS_LED6             (1 << 6)
-#define REALVIEW_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  REALVIEW_SYS_LED
-
-/* 
- * Control registers
- */
-#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
-#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
-#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-/*
- * System controller bit assignment
- */
-#define REALVIEW_REFCLK	0
-#define REALVIEW_TIMCLK	1
-
-#define REALVIEW_TIMER1_EnSel	15
-#define REALVIEW_TIMER2_EnSel	17
-#define REALVIEW_TIMER3_EnSel	19
-#define REALVIEW_TIMER4_EnSel	21
-
-
-#define REALVIEW_CSR_BASE             0x10000000
-#define REALVIEW_CSR_SIZE             0x10000000
-
-#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c
index 6964e88..70ca99e 100644
--- a/arch/arm/mach-realview/platsmp-dt.c
+++ b/arch/arm/mach-realview/platsmp-dt.c
@@ -17,8 +17,7 @@
 #include <asm/smp_scu.h>
 
 #include <plat/platsmp.h>
-
-#include "core.h"
+#include "hotplug.h"
 
 #define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
deleted file mode 100644
index e8ab69c..0000000
--- a/arch/arm/mach-realview/platsmp.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-#include <asm/mach-types.h>
-#include <asm/smp_scu.h>
-
-#include "board-eb.h"
-#include "board-pb11mp.h"
-#include "board-pbx.h"
-
-#include <plat/platsmp.h>
-
-#include "core.h"
-
-static void __iomem *scu_base_addr(void)
-{
-	if (machine_is_realview_eb_mp())
-		return __io_address(REALVIEW_EB11MP_SCU_BASE);
-	else if (machine_is_realview_pb11mp())
-		return __io_address(REALVIEW_TC11MP_SCU_BASE);
-	else if (machine_is_realview_pbx() &&
-		 (core_tile_pbx11mp() || core_tile_pbxa9mp()))
-		return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
-	else
-		return (void __iomem *)0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init realview_smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	__raw_writel(virt_to_phys(versatile_secondary_startup),
-		     __io_address(REALVIEW_SYS_FLAGSSET));
-}
-
-const struct smp_operations realview_smp_ops __initconst = {
-	.smp_init_cpus		= realview_smp_init_cpus,
-	.smp_prepare_cpus	= realview_smp_prepare_cpus,
-	.smp_secondary_init	= versatile_secondary_init,
-	.smp_boot_secondary	= versatile_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= realview_cpu_die,
-#endif
-};
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
deleted file mode 100644
index b442fa6..0000000
--- a/arch/arm/mach-realview/realview_eb.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_eb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-#include <asm/system_info.h>
-#include <asm/outercache.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "board-eb.h"
-#include "irqs-eb.h"
-
-#include "core.h"
-
-static struct map_desc realview_eb_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}
-#endif
-};
-
-static struct map_desc realview_eb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_EB11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}
-};
-
-static void __init realview_eb_map_io(void)
-{
-	iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView EB AMBA devices
- */
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_EB_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_EB_GPIO3 }
-
-#define AACI_IRQ	{ IRQ_EB_AACI }
-#define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ	{ IRQ_EB_KMI0 }
-#define KMI1_IRQ	{ IRQ_EB_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define EB_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define EB_CLCD_IRQ	{ IRQ_EB_CLCD }
-#define DMAC_IRQ	{ IRQ_EB_DMA }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG }
-#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_EB_GPIO1 }
-#define EB_RTC_IRQ	{ IRQ_EB_RTC }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_EB_SCI }
-#define EB_UART0_IRQ	{ IRQ_EB_UART0 }
-#define EB_UART1_IRQ	{ IRQ_EB_UART1 }
-#define EB_UART2_IRQ	{ IRQ_EB_UART2 }
-#define EB_UART3_IRQ	{ IRQ_EB_UART3 }
-#define EB_SSP_IRQ	{ IRQ_EB_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView EB platform devices
- */
-static struct resource realview_eb_flash_resource = {
-	.start			= REALVIEW_EB_FLASH_BASE,
-	.end			= REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct resource realview_eb_eth_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_ETH_BASE,
-		.end		= REALVIEW_EB_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_ETH,
-		.end		= IRQ_EB_ETH,
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/*
- * Detect and register the correct Ethernet device. RealView/EB rev D
- * platforms use the newer SMSC LAN9118 Ethernet chip
- */
-static int eth_device_register(void)
-{
-	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
-	const char *name = NULL;
-	u32 idrev;
-
-	if (!eth_addr)
-		return -ENOMEM;
-
-	idrev = readl(eth_addr + 0x50);
-	if ((idrev & 0xFFFF0000) != 0x01180000)
-		/* SMSC LAN9118 not present, use LAN91C111 instead */
-		name = "smc91x";
-
-	iounmap(eth_addr);
-	return realview_eth_register(name, realview_eb_eth_resources);
-}
-
-static struct resource realview_eb_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_EB_USB_BASE,
-		.end		= REALVIEW_EB_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_EB_USB,
-		.end		= IRQ_EB_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_EB11MP_PMU_CPU0,
-		.end		= IRQ_EB11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_EB11MP_PMU_CPU1,
-		.end		= IRQ_EB11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_EB11MP_PMU_CPU2,
-		.end		= IRQ_EB11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_EB11MP_PMU_CPU3,
-		.end		= IRQ_EB11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_EB_CHARLCD,
-		.end	= IRQ_EB_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		unsigned int pldctrl;
-
-		/* new irq mode */
-		writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-		pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		pldctrl |= 0x00800000;
-		writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
-		writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-		/* core tile GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
-
-#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
-		/* board GIC, secondary */
-		gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
-#endif
-	} else {
-		/* board GIC, primary */
-		gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
-			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
-	}
-}
-
-/*
- * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
- */
-static void realview_eb11mp_fixup(void)
-{
-	/* AMBA devices */
-	dmac_device.irq[0]	= IRQ_EB11MP_DMA;
-	uart0_device.irq[0]	= IRQ_EB11MP_UART0;
-	uart1_device.irq[0]	= IRQ_EB11MP_UART1;
-	uart2_device.irq[0]	= IRQ_EB11MP_UART2;
-	uart3_device.irq[0]	= IRQ_EB11MP_UART3;
-	clcd_device.irq[0]	= IRQ_EB11MP_CLCD;
-	wdog_device.irq[0]	= IRQ_EB11MP_WDOG;
-	gpio0_device.irq[0]	= IRQ_EB11MP_GPIO0;
-	gpio1_device.irq[0]	= IRQ_EB11MP_GPIO1;
-	gpio2_device.irq[0]	= IRQ_EB11MP_GPIO2;
-	rtc_device.irq[0]	= IRQ_EB11MP_RTC;
-	sci0_device.irq[0]	= IRQ_EB11MP_SCI;
-	ssp0_device.irq[0]	= IRQ_EB11MP_SSP;
-	aaci_device.irq[0]	= IRQ_EB11MP_AACI;
-	mmc0_device.irq[0]	= IRQ_EB11MP_MMCI0A;
-	mmc0_device.irq[1]	= IRQ_EB11MP_MMCI0B;
-	kmi0_device.irq[0]	= IRQ_EB11MP_KMI0;
-	kmi1_device.irq[0]	= IRQ_EB11MP_KMI1;
-
-	/* platform devices */
-	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
-	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
-	realview_eb_isp1761_resources[1].start	= IRQ_EB11MP_USB;
-	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_EB11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_eb_twd_init(void)
-{
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		int err = twd_local_timer_register(&twd_local_timer);
-		if (err)
-			pr_err("twd_local_timer_register failed %d\n", err);
-	}
-}
-#else
-#define realview_eb_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_eb_timer_init(void)
-{
-	unsigned int timer_irq;
-
-	timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
-
-	if (core_tile_eb11mp() || core_tile_a9mp())
-		timer_irq = IRQ_EB11MP_TIMER0_1;
-	else
-		timer_irq = IRQ_EB_TIMER0_1;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(timer_irq);
-	realview_eb_twd_init();
-}
-
-static void realview_eb_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	if (core_tile_eb11mp())
-		__raw_writel(0x0008, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_eb_init(void)
-{
-	int i;
-
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-		realview_eb11mp_fixup();
-
-#ifdef CONFIG_CACHE_L2X0
-		/*
-		 * The PL220 needs to be manually configured as the hardware
-		 * doesn't report the correct sizes.
-		 * 1MB (128KB/way), 8-way associativity, event monitor and
-		 * parity enabled, ignore share bit, no force write allocate
-		 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-		 */
-		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
-
-		/*
-		 * due to a bug in the l220 cache controller, we must not call
-		 * the sync function. stub it out here instead!
-		 */
-		outer_cache.sync = NULL;
-#endif
-		pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
-		platform_device_register(&pmu_device);
-	}
-
-	realview_flash_register(&realview_eb_flash_resource, 1);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&realview_leds_device);
-	eth_device_register();
-	realview_usb_register(realview_eb_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_eb_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_eb_timer_init,
-	.init_machine	= realview_eb_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_eb_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
deleted file mode 100644
index 537f387..0000000
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb1176.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "board-pb1176.h"
-#include "irqs-pb1176.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb1176_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB1176_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB1176_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb1176_map_io(void)
-{
-	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB1176 AMBA devices
- */
-#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2 }
-#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3 }
-#define AACI_IRQ	{ IRQ_PB1176_AACI }
-#define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ	{ IRQ_PB1176_KMI0 }
-#define KMI1_IRQ	{ IRQ_PB1176_KMI1 }
-#define PB1176_SMC_IRQ	{ }
-#define MPMC_IRQ	{ }
-#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
-#define SCTL_IRQ	{ }
-#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
-#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
-#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
-#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
-#define SCI_IRQ		{ IRQ_PB1176_SCI }
-#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0 }
-#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1 }
-#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2 }
-#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3 }
-#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4 }
-#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB1176_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB1176_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-APB_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
-AHB_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&uart4_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB1176 platform devices
- */
-static struct resource realview_pb1176_flash_resources[] = {
-	{
-		.start		= REALVIEW_PB1176_FLASH_BASE,
-		.end		= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
-	{
-		.start		= REALVIEW_PB1176_SEC_FLASH_BASE,
-		.end		= REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-#endif
-};
-
-static struct physmap_flash_data pb1176_rom_pdata = {
-	.probe_type	= "map_rom",
-	.width		= 4,
-	.nr_parts	= 0,
-};
-
-static struct resource pb1176_rom_resources[] = {
-	/*
-	 * This exposes the PB1176 DevChip ROM as an MTD ROM mapping.
-	 * The reference manual states that this is actually a pseudo-ROM
-	 * programmed in NVRAM.
-	 */
-	{
-		.start		= REALVIEW_DC1176_ROM_BASE,
-		.end		= REALVIEW_DC1176_ROM_BASE + SZ_16K - 1,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device pb1176_rom_device = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pb1176_rom_resources),
-	.resource	= pb1176_rom_resources,
-	.dev = {
-		.platform_data = &pb1176_rom_pdata,
-	},
-};
-
-static struct resource realview_pb1176_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_ETH_BASE,
-		.end		= REALVIEW_PB1176_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_ETH,
-		.end		= IRQ_PB1176_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb1176_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB1176_USB_BASE,
-		.end		= REALVIEW_PB1176_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PB1176_USB,
-		.end		= IRQ_PB1176_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_DC1176_CORE_PMU,
-	.end		= IRQ_DC1176_CORE_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = REALVIEW_CHAR_LCD_BASE,
-		.end   = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_PB1176_CHARLCD,
-		.end	= IRQ_PB1176_CHARLCD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name		=	"arm-charlcd",
-	.id		=	-1,
-	.num_resources	=	ARRAY_SIZE(char_lcd_resources),
-	.resource	=	char_lcd_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM1176 DevChip GIC, primary */
-	gic_init(0, IRQ_DC1176_GIC_START,
-		 __io_address(REALVIEW_DC1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_DC1176_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB1176_GIC_START,
-		 __io_address(REALVIEW_PB1176_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
-}
-
-static void __init realview_pb1176_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), true);
-	realview_timer_init(IRQ_DC1176_TIMER0);
-}
-
-static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
-	dsb();
-}
-
-static void realview_pb1176_fixup(struct tag *tags, char **from)
-{
-	/*
-	 * RealView PB1176 only has 128MB of RAM mapped at 0.
-	 */
-	memblock_add(0, SZ_128M);
-}
-
-static void __init realview_pb1176_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 128kB (16kB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 0011 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
-#endif
-
-	realview_flash_register(realview_pb1176_flash_resources,
-				ARRAY_SIZE(realview_pb1176_flash_resources));
-	platform_device_register(&pb1176_rom_device);
-	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	realview_usb_register(realview_pb1176_isp1761_resources);
-	platform_device_register(&pmu_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&realview_leds_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_pb1176_fixup,
-	.map_io		= realview_pb1176_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb1176_timer_init,
-	.init_machine	= realview_pb1176_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb1176_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
deleted file mode 100644
index a90a075..0000000
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pb11mp.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_twd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/outercache.h>
-
-#include "board-pb11mp.h"
-#include "irqs-pb11mp.h"
-
-#include "core.h"
-
-static struct map_desc realview_pb11mp_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {	/* Maps the SCU, GIC CPU interface, TWD, GIC DIST */
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE),
-		.length		= REALVIEW_TC11MP_PRIV_MEM_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pb11mp_map_io(void)
-{
-	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PB11MPCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI }
-#define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
-#define PB11MP_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
-#define SCTL_IRQ		{ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB11MPCore platform devices
- */
-static struct resource realview_pb11mp_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_FLASH0_BASE,
-		.end		= REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PB11MP_FLASH1_BASE,
-		.end		= REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pb11mp_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_ETH_BASE,
-		.end		= REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_ETH,
-		.end		= IRQ_TC11MP_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pb11mp_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PB11MP_USB_BASE,
-		.end		= REALVIEW_PB11MP_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_USB,
-		.end		= IRQ_TC11MP_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_TC11MP_PMU_CPU0,
-		.end		= IRQ_TC11MP_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_TC11MP_PMU_CPU1,
-		.end		= IRQ_TC11MP_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_TC11MP_PMU_CPU2,
-		.end		= IRQ_TC11MP_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_TC11MP_PMU_CPU3,
-		.end		= IRQ_TC11MP_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv6-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-
-static void __init gic_init_irq(void)
-{
-	unsigned int pldctrl;
-
-	/* new irq mode with no DCC */
-	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	pldctrl |= 2 << 22;
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
-	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
-
-	/* ARM11MPCore test chip GIC, primary */
-	gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
-
-	/* board GIC, secondary */
-	gic_init(1, IRQ_PB11MP_GIC_START,
-		 __io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
-	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_TC11MP_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pb11mp_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pb11mp_twd_init()	do {} while(0)
-#endif
-
-static void __init realview_pb11mp_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_TC11MP_TIMER0_1);
-	realview_pb11mp_twd_init();
-}
-
-static void realview_pb11mp_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pb11mp_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * The PL220 needs to be manually configured as the hardware
-	 * doesn't report the correct sizes.
-	 * 1MB (128KB/way), 8-way associativity, event monitor and
-	 * parity enabled, ignore share bit, no force write allocate
-	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
-	 */
-	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
-	/*
-	 * due to a bug in the l220 cache controller, we must not call
-	 * the sync function. stub it out here instead!
-	 */
-	outer_cache.sync = NULL;
-#endif
-
-	realview_flash_register(realview_pb11mp_flash_resource,
-				ARRAY_SIZE(realview_pb11mp_flash_resource));
-	realview_eth_register(NULL, realview_pb11mp_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pb11mp_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_fixup,
-	.map_io		= realview_pb11mp_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pb11mp_timer_init,
-	.init_machine	= realview_pb11mp_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pb11mp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
deleted file mode 100644
index ddafb67..0000000
--- a/arch/arm/mach-realview/realview_pba8.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/realview_pba8.c
- *
- *  Copyright (C) 2008 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "board-pba8.h"
-#include "irqs-pba8.h"
-
-#include "core.h"
-
-static struct map_desc realview_pba8_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static void __init realview_pba8_map_io(void)
-{
-	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBA8Core AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBA8_AACI }
-#define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBA8_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBA8_KMI1 }
-#define PBA8_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD }
-#define DMAC_IRQ		{ IRQ_PBA8_DMAC }
-#define SCTL_IRQ		{ }
-#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG }
-#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1 }
-#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC }
-#define SCI_IRQ			{ IRQ_PBA8_SCI }
-#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0 }
-#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1 }
-#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2 }
-#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3 }
-#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,		"dev:smc",	PBA8_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBA8_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-A8 platform devices
- */
-static struct resource realview_pba8_flash_resource[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_FLASH0_BASE,
-		.end		= REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= REALVIEW_PBA8_FLASH1_BASE,
-		.end		= REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pba8_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_ETH_BASE,
-		.end		= REALVIEW_PBA8_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_ETH,
-		.end		= IRQ_PBA8_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pba8_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBA8_USB_BASE,
-		.end		= REALVIEW_PBA8_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBA8_USB,
-		.end		= IRQ_PBA8_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource pmu_resource = {
-	.start		= IRQ_PBA8_PMU,
-	.end		= IRQ_PBA8_PMU,
-	.flags		= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv7-pmu",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &pmu_resource,
-};
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PB-A8 on-board GIC */
-	gic_init(0, IRQ_PBA8_GIC_START,
-		 __io_address(REALVIEW_PBA8_GIC_DIST_BASE),
-		 __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
-}
-
-static void __init realview_pba8_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_PBA8_TIMER0_1);
-}
-
-static void realview_pba8_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pba8_init(void)
-{
-	int i;
-
-	realview_flash_register(realview_pba8_flash_resource,
-				ARRAY_SIZE(realview_pba8_flash_resource));
-	realview_eth_register(NULL, realview_pba8_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pba8_isp1761_resources);
-	platform_device_register(&pmu_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.fixup		= realview_fixup,
-	.map_io		= realview_pba8_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pba8_timer_init,
-	.init_machine	= realview_pba8_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pba8_restart,
-MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
deleted file mode 100644
index be1cec5..0000000
--- a/arch/arm/mach-realview/realview_pbx.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- *  arch/arm/mach-realview/realview_pbx.c
- *
- *  Copyright (C) 2009 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/clk-realview.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/smp_twd.h>
-#include <asm/pgtable.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "board-pbx.h"
-#include "irqs-pbx.h"
-
-#include "core.h"
-
-static struct map_desc realview_pbx_io_desc[] __initdata = {
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#ifdef CONFIG_DEBUG_LL
-	{
-		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-#endif
-};
-
-static struct map_desc realview_local_io_desc[] __initdata = {
-	{
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-		.length         = SZ_4K,
-		.type           = MT_DEVICE,
-	}, {
-		.virtual        = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
-		.pfn            = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
-		.length         = SZ_8K,
-		.type           = MT_DEVICE,
-	}
-};
-
-static void __init realview_pbx_map_io(void)
-{
-	iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
-		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
-}
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-/*
- * RealView PBXCore AMBA devices
- */
-
-#define GPIO2_IRQ		{ IRQ_PBX_GPIO2 }
-#define GPIO3_IRQ		{ IRQ_PBX_GPIO3 }
-#define AACI_IRQ		{ IRQ_PBX_AACI }
-#define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBX_KMI0 }
-#define KMI1_IRQ		{ IRQ_PBX_KMI1 }
-#define PBX_SMC_IRQ		{ }
-#define MPMC_IRQ		{ }
-#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD }
-#define DMAC_IRQ		{ IRQ_PBX_DMAC }
-#define SCTL_IRQ		{ }
-#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG }
-#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0 }
-#define GPIO1_IRQ		{ IRQ_PBX_GPIO1 }
-#define PBX_RTC_IRQ		{ IRQ_PBX_RTC }
-#define SCI_IRQ			{ IRQ_PBX_SCI }
-#define PBX_UART0_IRQ		{ IRQ_PBX_UART0 }
-#define PBX_UART1_IRQ		{ IRQ_PBX_UART1 }
-#define PBX_UART2_IRQ		{ IRQ_PBX_UART2 }
-#define PBX_UART3_IRQ		{ IRQ_PBX_UART3 }
-#define PBX_SSP_IRQ		{ IRQ_PBX_SSP }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-APB_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
-AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-APB_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
-APB_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
-APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-APB_DEVICE(rtc,		"dev:rtc",	PBX_RTC,	NULL);
-APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-APB_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
-APB_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
-APB_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-APB_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
-
-/* Primecells on the NEC ISSP chip */
-AHB_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
-AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-	&smc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-/*
- * RealView PB-X platform devices
- */
-static struct resource realview_pbx_flash_resources[] = {
-	[0] = {
-		.start          = REALVIEW_PBX_FLASH0_BASE,
-		.end            = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start          = REALVIEW_PBX_FLASH1_BASE,
-		.end            = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct resource realview_pbx_smsc911x_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_ETH_BASE,
-		.end		= REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_ETH,
-		.end		= IRQ_PBX_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource realview_pbx_isp1761_resources[] = {
-	[0] = {
-		.start		= REALVIEW_PBX_USB_BASE,
-		.end		= REALVIEW_PBX_USB_BASE + SZ_128K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_PBX_USB,
-		.end		= IRQ_PBX_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-#ifdef CONFIG_CACHE_L2X0
-static struct resource pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_PBX_PMU_CPU0,
-		.end		= IRQ_PBX_PMU_CPU0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start		= IRQ_PBX_PMU_CPU1,
-		.end		= IRQ_PBX_PMU_CPU1,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start		= IRQ_PBX_PMU_CPU2,
-		.end		= IRQ_PBX_PMU_CPU2,
-		.flags		= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start		= IRQ_PBX_PMU_CPU3,
-		.end		= IRQ_PBX_PMU_CPU3,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device pmu_device = {
-	.name			= "armv7-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(pmu_resources),
-	.resource		= pmu_resources,
-};
-#endif
-
-static void __init gic_init_irq(void)
-{
-	/* ARM PBX on-board GIC */
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
-		gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
-	} else {
-		gic_init(0, IRQ_PBX_GIC_START,
-			 __io_address(REALVIEW_PBX_GIC_DIST_BASE),
-			 __io_address(REALVIEW_PBX_GIC_CPU_BASE));
-	}
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
-			      REALVIEW_PBX_TILE_TWD_BASE,
-			      IRQ_LOCALTIMER);
-
-static void __init realview_pbx_twd_init(void)
-{
-	int err = twd_local_timer_register(&twd_local_timer);
-	if (err)
-		pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define realview_pbx_twd_init()	do { } while(0)
-#endif
-
-static void __init realview_pbx_timer_init(void)
-{
-	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
-	timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
-	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
-	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
-
-	realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
-	realview_timer_init(IRQ_PBX_TIMER0_1);
-	realview_pbx_twd_init();
-}
-
-static void realview_pbx_fixup(struct tag *tags, char **from)
-{
-#ifdef CONFIG_SPARSEMEM
-	/*
-	 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
-	 * asm/mach/memory.h for more information).
-	 */
-
-	memblock_add(0, SZ_256M);
-	memblock_add(0x20000000, SZ_512M);
-	memblock_add(0x80000000, SZ_256M);
-#else
-	realview_fixup(tags, from);
-#endif
-}
-
-static void realview_pbx_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
-	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
-
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA
-	 */
-	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x00F0, reset_ctrl);
-	__raw_writel(0x00F4, reset_ctrl);
-	dsb();
-}
-
-static void __init realview_pbx_init(void)
-{
-	int i;
-
-#ifdef CONFIG_CACHE_L2X0
-	if (core_tile_pbxa9mp()) {
-		void __iomem *l2x0_base =
-			__io_address(REALVIEW_PBX_TILE_L220_BASE);
-
-		/* set RAM latencies to 1 cycle for eASIC */
-		writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
-		writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
-
-		/* 16KB way size, 8-way associativity, parity disabled
-		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
-		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
-		platform_device_register(&pmu_device);
-	}
-#endif
-
-	realview_flash_register(realview_pbx_flash_resources,
-				ARRAY_SIZE(realview_pbx_flash_resources));
-	realview_eth_register(NULL, realview_pbx_smsc911x_resources);
-	platform_device_register(&realview_i2c_device);
-	platform_device_register(&realview_cf_device);
-	platform_device_register(&realview_leds_device);
-	realview_usb_register(realview_pbx_isp1761_resources);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(realview_smp_ops),
-	.fixup		= realview_pbx_fixup,
-	.map_io		= realview_pbx_map_io,
-	.init_early	= realview_init_early,
-	.init_irq	= gic_init_irq,
-	.init_time	= realview_pbx_timer_init,
-	.init_machine	= realview_pbx_init,
-#ifdef CONFIG_ZONE_DMA
-	.dma_zone_size	= SZ_256M,
-#endif
-	.restart	= realview_pbx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
index 257166b..aa79fa4 100644
--- a/arch/arm/mach-rpc/include/mach/hardware.h
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -40,7 +40,7 @@
 #define SCREEN_END		0xdfc00000
 #define SCREEN_BASE		0xdf800000
 
-#define UNCACHEABLE_ADDR	0xdf010000
+#define UNCACHEABLE_ADDR	(FLUSH_BASE + 0x10000)
 
 /*
  * IO Addresses
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index bf50328..f6c3f15 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -21,7 +21,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -33,6 +33,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/platform_data/dma-s3c24xx.h>
+#include <linux/dmaengine.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -304,6 +305,8 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
+#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
+
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
 	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 static struct resource s3c2410_dma_resource[] = {
@@ -354,7 +357,9 @@ struct platform_device s3c2410_device_dma = {
 	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
 	.resource	= s3c2410_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2410_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2410_dma_platdata,
 	},
 };
 #endif
@@ -395,7 +400,9 @@ struct platform_device s3c2412_device_dma = {
 	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
 	.resource	= s3c2410_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2412_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2412_dma_platdata,
 	},
 };
 #endif
@@ -439,10 +446,44 @@ static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
 	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
 };
 
+static const struct dma_slave_map s3c2440_dma_slave_map[] = {
+	/* TODO: DMACH_XD0 */
+	/* TODO: DMACH_XD1 */
+	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
+	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
+	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
+	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
+	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
+	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
+	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
+	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
+	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
+	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
+	/* TODO: DMACH_TIMER */
+	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
+	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
+	{ "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
+	{ "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
+	{ "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
+	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
+	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
+	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
+	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
+	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
+};
+
 static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
 	.num_phy_channels = 4,
 	.channels = s3c2440_dma_channels,
 	.num_channels = DMACH_MAX,
+	.slave_map = s3c2440_dma_slave_map,
+	.slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
 };
 
 struct platform_device s3c2440_device_dma = {
@@ -451,7 +492,9 @@ struct platform_device s3c2440_device_dma = {
 	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
 	.resource	= s3c2410_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2440_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2440_dma_platdata,
 	},
 };
 #endif
@@ -503,7 +546,9 @@ struct platform_device s3c2443_device_dma = {
 	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
 	.resource	= s3c2443_dma_resource,
 	.dev	= {
-		.platform_data	= &s3c2443_dma_platdata,
+		.dma_mask = &s3c24xx_device_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s3c2443_dma_platdata,
 	},
 };
 #endif
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a852168..ec60bd4 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -497,9 +497,28 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
 	},
 };
 
+static struct uda134x_platform_data s3c24xx_uda134x = {
+	.l3 = {
+		.gpio_clk = S3C2410_GPB(4),
+		.gpio_data = S3C2410_GPB(3),
+		.gpio_mode = S3C2410_GPB(2),
+		.use_gpios = 1,
+		.data_hold = 1,
+		.data_setup = 1,
+		.clock_high = 1,
+		.mode_hold = 1,
+		.mode = 1,
+		.mode_setup = 1,
+	},
+	.model = UDA134X_UDA1341,
+};
+
 static struct platform_device uda1340_codec = {
 		.name = "uda134x-codec",
 		.id = -1,
+		.dev = {
+			.platform_data	= &s3c24xx_uda134x,
+		},
 };
 
 static struct platform_device *mini2440_devices[] __initdata = {
@@ -516,6 +535,7 @@ static struct platform_device *mini2440_devices[] __initdata = {
 	&mini2440_button_device,
 	&s3c_device_nand,
 	&s3c_device_sdi,
+	&s3c2440_device_dma,
 	&s3c_device_iis,
 	&uda1340_codec,
 	&mini2440_audio,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 571f95c..ccc3ab8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -393,8 +393,7 @@ static const struct i2c_device_id wlf_gf_module_id[] = {
 
 static struct i2c_driver wlf_gf_module_driver = {
 	.driver = {
-		.name = "wlf-gf-module",
-		.owner = THIS_MODULE,
+		.name = "wlf-gf-module"
 	},
 	.probe = wlf_gf_module_probe,
 	.id_table = wlf_gf_module_id,
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index cbf53bb..0db4689 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk)
 }
 
 static struct clkops clk_36864_ops = {
+	.enable		= clk_cpu_enable,
+	.disable	= clk_cpu_disable,
 	.get_rate	= clk_36864_get_rate,
 };
 
@@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = {
 	CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864),
 };
 
-static int __init sa11xx_clk_init(void)
+int __init sa11xx_clk_init(void)
 {
 	clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
 	return 0;
 }
-core_initcall(sa11xx_clk_init);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 345e63f..3e09bed 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -34,6 +34,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 #include <clocksource/pxa.h>
@@ -95,6 +96,8 @@ static void sa1100_power_off(void)
 
 void sa11x0_restart(enum reboot_mode mode, const char *cmd)
 {
+	clear_reset_status(RESET_STATUS_ALL);
+
 	if (mode == REBOOT_SOFT) {
 		/* Jump into ROM at address 0 */
 		soft_restart(0);
@@ -388,6 +391,7 @@ void __init sa1100_init_irq(void)
 	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
 
 	sa1100_init_gpio();
+	sa11xx_clk_init();
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 0d92e11..68199b603 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -44,3 +44,5 @@ int sa11x0_pm_init(void);
 #else
 static inline int sa11x0_pm_init(void) { return 0; }
 #endif
+
+int sa11xx_clk_init(void);
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
index b1d4faa..b69e766 100644
--- a/arch/arm/mach-sa1100/h3xxx.c
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -14,9 +14,9 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/mfd/htc-egpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/platform_data/gpio-htc-egpio.h>
 #include <linux/platform_data/sa11x0-serial.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index cbedd75..d944fd7 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -13,7 +13,7 @@
 #define __ASM_ARCH_HARDWARE_H
 
 
-#define UNCACHEABLE_ADDR	0xfa050000
+#define UNCACHEABLE_ADDR	0xfa050000	/* ICIP */
 
 
 /*
@@ -36,28 +36,10 @@
 #define io_v2p( x )             \
    ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
 
-#define CPU_SA1110_A0	(0)
-#define CPU_SA1110_B0	(4)
-#define CPU_SA1110_B1	(5)
-#define CPU_SA1110_B2	(6)
-#define CPU_SA1110_B4	(8)
-
-#define CPU_SA1100_ID	(0x4401a110)
-#define CPU_SA1100_MASK	(0xfffffff0)
-#define CPU_SA1110_ID	(0x6901b110)
-#define CPU_SA1110_MASK	(0xfffffff0)
-
 #define __MREG(x)	IOMEM(io_p2v(x))
 
 #ifndef __ASSEMBLY__
 
-#include <asm/cputype.h>
-
-#define CPU_REVISION	(read_cpuid_id() & 15)
-
-#define cpu_is_sa1100()	((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
-#define cpu_is_sa1110()	((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
-
 # define __REG(x)	(*((volatile unsigned long __iomem *)io_p2v(x)))
 # define __PREG(x)	(io_v2p((unsigned long)&(x)))
 
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index c0b1f5b..0a2ca9b 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_data/sa11x0-serial.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
@@ -217,9 +218,22 @@ static struct platform_device jornada_ssp_device = {
 	.id             = -1,
 };
 
+static struct resource jornada_kbd_resources[] = {
+	DEFINE_RES_IRQ(IRQ_GPIO0),
+};
+
 static struct platform_device jornada_kbd_device = {
 	.name		= "jornada720_kbd",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jornada_kbd_resources),
+	.resource	= jornada_kbd_resources,
+};
+
+static struct gpiod_lookup_table jornada_ts_gpiod_table = {
+	.dev_id		= "jornada_ts",
+	.table		= {
+		GPIO_LOOKUP("gpio", 9, "penup", GPIO_ACTIVE_HIGH),
+	},
 };
 
 static struct platform_device jornada_ts_device = {
@@ -250,6 +264,8 @@ static int __init jornada720_init(void)
 		GPSR = GPIO_GPIO20;	/* restart gpio20 */
 		udelay(20);		/* give it some time to restart */
 
+		gpiod_add_lookup_table(&jornada_ts_gpiod_table);
+
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 4a48c9f..09817ba 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -22,7 +22,6 @@ config ARCH_RCAR_GEN2
 	select PM_GENERIC_DOMAINS
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
-	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index 8d478f1..d1ecaf3 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -21,26 +21,14 @@
 static phys_addr_t shmobile_scu_base_phys;
 static void __iomem *shmobile_scu_base;
 
-static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
-					  unsigned long action, void *hcpu)
+static int shmobile_scu_cpu_prepare(unsigned int cpu)
 {
-	unsigned int cpu = (long)hcpu;
-
-	switch (action) {
-	case CPU_UP_PREPARE:
-		/* For this particular CPU register SCU SMP boot vector */
-		shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
-				  shmobile_scu_base_phys);
-		break;
-	};
-
-	return NOTIFY_OK;
+	/* For this particular CPU register SCU SMP boot vector */
+	shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
+			  shmobile_scu_base_phys);
+	return 0;
 }
 
-static struct notifier_block shmobile_smp_scu_notifier = {
-	.notifier_call = shmobile_smp_scu_notifier_call,
-};
-
 void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
 					  unsigned int max_cpus)
 {
@@ -54,7 +42,9 @@ void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 
 	/* Use CPU notifier for reset vector control */
-	register_cpu_notifier(&shmobile_smp_scu_notifier);
+	cpuhp_setup_state_nocalls(CPUHP_ARM_SHMOBILE_SCU_PREPARE,
+				  "arm/shmobile-scu:prepare",
+				  shmobile_scu_cpu_prepare, NULL);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 62437b5..73e3adb 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
 
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3506327..78d3e85 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -28,7 +28,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.smp_init	= shmobile_smp_init_fallback_ops,
+	.smp_init	= smp_init_ops(shmobile_smp_init_fallback_ops),
 	.smp		= smp_ops(r8a7790_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 110e8b5..26e2d18 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -29,7 +29,7 @@ static const char *const r8a7791_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)")
-	.smp_init	= shmobile_smp_init_fallback_ops,
+	.smp_init	= smp_init_ops(shmobile_smp_init_fallback_ops),
 	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= shmobile_init_delay,
 	.init_time	= rcar_gen2_timer_init,
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b7260c2..1b6cae5 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -20,7 +20,6 @@ config ARCH_SPEAR13XX
 	select HAVE_ARM_TWD if SMP
 	select PINCTRL
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	help
 	  Supports for ARM's SPEAR13XX family
 
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 096ed21..b9863f9 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -32,6 +32,7 @@ config MACH_SUN7I
 	default ARCH_SUNXI
 	select ARM_GIC
 	select ARM_PSCI
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select HAVE_ARM_ARCH_TIMER
 	select SUN5I_HSTIMER
 
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 95dca8c..2e2bde2 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -22,6 +22,7 @@ static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun5i-a10s",
 	"allwinner,sun5i-a13",
 	"allwinner,sun5i-r8",
+	"nextthing,gr8",
 	NULL,
 };
 
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 396afe1..6bea3d3 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_SMP)	+= platsmp.o headsmp.o
+obj- += dummy.o
diff --git a/arch/arm/mach-uniphier/headsmp.S b/arch/arm/mach-uniphier/headsmp.S
deleted file mode 100644
index c819dff..0000000
--- a/arch/arm/mach-uniphier/headsmp.S
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/cp15.h>
-
-ENTRY(uniphier_smp_trampoline)
-ARM_BE8(setend	be)			@ ensure we are in BE8 mode
-	mrc	p15, 0, r0, c0, c0, 5	@ MPIDR (Multiprocessor Affinity Reg)
-	and  	r2, r0, #0x3		@ CPU ID
-	ldr	r1, uniphier_smp_trampoline_jump
-	ldr	r3, uniphier_smp_trampoline_poll_addr
-	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
-	orr	r0, r0, #CR_I		@ Enable ICache
-	bic	r0, r0, #(CR_C | CR_M)	@ Disable MMU and Dcache
-	mcr	p15, 0, r0, c1, c0, 0
-	b	1f			@ cache the following 5 instructions
-0:	wfe
-1:	ldr	r0, [r3]
-	cmp	r0, r2
-	bxeq	r1			@ branch to secondary_startup
-	b	0b
-	.globl	uniphier_smp_trampoline_jump
-uniphier_smp_trampoline_jump:
-	.word	0			@ set virt_to_phys(secondary_startup)
-	.globl	uniphier_smp_trampoline_poll_addr
-uniphier_smp_trampoline_poll_addr:
-	.word	0			@ set CPU ID to be kicked to this reg
-	.globl	uniphier_smp_trampoline_end
-uniphier_smp_trampoline_end:
-ENDPROC(uniphier_smp_trampoline)
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
deleted file mode 100644
index 9978c41..0000000
--- a/arch/arm/mach-uniphier/platsmp.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt)		"uniphier: " fmt
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/sizes.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-uniphier.h>
-#include <asm/pgtable.h>
-#include <asm/smp.h>
-#include <asm/smp_scu.h>
-
-/*
- * The secondary CPUs check this register from the boot ROM for the jump
- * destination.  After that, it can be reused as a scratch register.
- */
-#define UNIPHIER_SMPCTRL_ROM_RSV2	0x208
-
-static void __iomem *uniphier_smp_rom_boot_rsv2;
-static unsigned int uniphier_smp_max_cpus;
-
-extern char uniphier_smp_trampoline;
-extern char uniphier_smp_trampoline_jump;
-extern char uniphier_smp_trampoline_poll_addr;
-extern char uniphier_smp_trampoline_end;
-
-/*
- * Copy trampoline code to the tail of the 1st section of the page table used
- * in the boot ROM.  This area is directly accessible by the secondary CPUs
- * for all the UniPhier SoCs.
- */
-static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
-static phys_addr_t uniphier_smp_trampoline_dest;
-
-static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
-{
-	size_t trmp_size;
-	static void __iomem *trmp_base;
-
-	if (!uniphier_cache_l2_is_enabled()) {
-		pr_warn("outer cache is needed for SMP, but not enabled\n");
-		return -ENODEV;
-	}
-
-	uniphier_cache_l2_set_locked_ways(1);
-
-	outer_flush_all();
-
-	trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
-	uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
-								trmp_size;
-
-	uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
-				      uniphier_smp_trampoline_dest_end);
-
-	trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
-	if (!trmp_base) {
-		pr_err("failed to map trampoline destination area\n");
-		return -ENOMEM;
-	}
-
-	memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
-
-	writel(virt_to_phys(secondary_startup),
-	       trmp_base + (&uniphier_smp_trampoline_jump -
-			    &uniphier_smp_trampoline));
-
-	writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
-				       &uniphier_smp_trampoline));
-
-	flush_cache_all();	/* flush out trampoline code to outer cache */
-
-	iounmap(trmp_base);
-
-	return 0;
-}
-
-static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
-{
-	struct device_node *np;
-	struct resource res;
-	phys_addr_t rom_rsv2_phys;
-	int ret;
-
-	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
-	ret = of_address_to_resource(np, 0, &res);
-	of_node_put(np);
-	if (ret) {
-		pr_err("failed to get resource of SMP control\n");
-		return ret;
-	}
-
-	rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
-
-	ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
-	if (ret)
-		return ret;
-
-	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
-	if (!uniphier_smp_rom_boot_rsv2) {
-		pr_err("failed to map ROM_BOOT_RSV2 register\n");
-		return -ENOMEM;
-	}
-
-	writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
-	asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
-
-	uniphier_smp_max_cpus = max_cpus;	/* save for later use */
-
-	return 0;
-}
-
-static void __init uniphier_smp_unprepare_trampoline(void)
-{
-	iounmap(uniphier_smp_rom_boot_rsv2);
-
-	if (uniphier_smp_trampoline_dest)
-		outer_inv_range(uniphier_smp_trampoline_dest,
-				uniphier_smp_trampoline_dest_end);
-
-	uniphier_cache_l2_set_locked_ways(0);
-}
-
-static int __init uniphier_smp_enable_scu(void)
-{
-	unsigned long scu_base_phys = 0;
-	void __iomem *scu_base;
-
-	if (scu_a9_has_base())
-		scu_base_phys = scu_a9_get_base();
-
-	if (!scu_base_phys) {
-		pr_err("failed to get scu base\n");
-		return -ENODEV;
-	}
-
-	scu_base = ioremap(scu_base_phys, SZ_128);
-	if (!scu_base) {
-		pr_err("failed to map scu base\n");
-		return -ENOMEM;
-	}
-
-	scu_enable(scu_base);
-	iounmap(scu_base);
-
-	return 0;
-}
-
-static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
-{
-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	int ret;
-
-	ret = uniphier_smp_prepare_trampoline(max_cpus);
-	if (ret)
-		goto err;
-
-	ret = uniphier_smp_enable_scu();
-	if (ret)
-		goto err;
-
-	return;
-err:
-	pr_warn("disabling SMP\n");
-	init_cpu_present(&only_cpu_0);
-	uniphier_smp_unprepare_trampoline();
-}
-
-static int __init uniphier_smp_boot_secondary(unsigned int cpu,
-					      struct task_struct *idle)
-{
-	if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
-		return -EFAULT;
-
-	writel(cpu, uniphier_smp_rom_boot_rsv2);
-	readl(uniphier_smp_rom_boot_rsv2); /* relax */
-
-	asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
-
-	if (cpu == uniphier_smp_max_cpus - 1) {
-		/* clean up resources if this is the last CPU */
-		uniphier_smp_unprepare_trampoline();
-	}
-
-	return 0;
-}
-
-static const struct smp_operations uniphier_smp_ops __initconst = {
-	.smp_prepare_cpus	= uniphier_smp_prepare_cpus,
-	.smp_boot_secondary	= uniphier_smp_boot_secondary,
-};
-CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
-		      &uniphier_smp_ops);
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index b0cc262..c257d40 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -9,7 +9,6 @@ config ARCH_VERSATILE
 	select CPU_ARM926T
 	select ICST
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index d15a7fe..c1799dd 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -403,6 +403,7 @@ config CPU_V7M
 	bool
 	select CPU_32v7M
 	select CPU_ABRT_NOMMU
+	select CPU_CACHE_V7M
 	select CPU_CACHE_NOP
 	select CPU_PABRT_LEGACY
 	select CPU_THUMBONLY
@@ -518,6 +519,9 @@ config CPU_CACHE_VIPT
 config CPU_CACHE_FA
 	bool
 
+config CPU_CACHE_V7M
+	bool
+
 if MMU
 # The copy-page model
 config CPU_COPY_V4WT
@@ -750,14 +754,14 @@ config CPU_HIGH_VECTOR
 
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache (I-bit)"
-	depends on CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
+	depends on (CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)) || CPU_V7M
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_DISABLE
 	bool "Disable D-Cache (C-bit)"
-	depends on CPU_CP15 && !SMP
+	depends on (CPU_CP15 && !SMP) || CPU_V7M
 	help
 	  Say Y here to disable the processor data cache. Unless
 	  you have a reason not to or are unsure, say N.
@@ -792,7 +796,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
+	depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 || CPU_V7M
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
@@ -916,6 +920,13 @@ config CACHE_L2X0
 	help
 	  This option enables the L2x0 PrimeCell.
 
+config CACHE_L2X0_PMU
+	bool "L2x0 performance monitor support" if CACHE_L2X0
+	depends on PERF_EVENTS
+	help
+	  This option enables support for the performance monitoring features
+	  of the L220 and PL310 outer cache controllers.
+
 if CACHE_L2X0
 
 config PL310_ERRATA_588369
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 7f76d96..e869824 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -43,9 +43,11 @@ obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
 obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
 obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
 obj-$(CONFIG_CPU_CACHE_NOP)	+= cache-nop.o
+obj-$(CONFIG_CPU_CACHE_V7M)	+= cache-v7m.o
 
 AFLAGS_cache-v6.o	:=-Wa,-march=armv6
 AFLAGS_cache-v7.o	:=-Wa,-march=armv7-a
+AFLAGS_cache-v7m.o	:=-Wa,-march=armv7-m
 
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
 obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
@@ -101,6 +103,7 @@ AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
 obj-$(CONFIG_OUTER_CACHE)	+= l2c-common.o
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o l2c-l2x0-resume.o
+obj-$(CONFIG_CACHE_L2X0_PMU)	+= cache-l2x0-pmu.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
 obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c
new file mode 100644
index 0000000..976d305
--- /dev/null
+++ b/arch/arm/mm/cache-l2x0-pmu.c
@@ -0,0 +1,584 @@
+/*
+ * L220/L310 cache controller support
+ *
+ * Copyright (C) 2016 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/errno.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#define PMU_NR_COUNTERS 2
+
+static void __iomem *l2x0_base;
+static struct pmu *l2x0_pmu;
+static cpumask_t pmu_cpu;
+
+static const char *l2x0_name;
+
+static ktime_t l2x0_pmu_poll_period;
+static struct hrtimer l2x0_pmu_hrtimer;
+
+/*
+ * The L220/PL310 PMU has two equivalent counters, Counter1 and Counter0.
+ * Registers controlling these are laid out in pairs, in descending order, i.e.
+ * the register for Counter1 comes first, followed by the register for
+ * Counter0.
+ * We ensure that idx 0 -> Counter0, and idx1 -> Counter1.
+ */
+static struct perf_event *events[PMU_NR_COUNTERS];
+
+/* Find an unused counter */
+static int l2x0_pmu_find_idx(void)
+{
+	int i;
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (!events[i])
+			return i;
+	}
+
+	return -1;
+}
+
+/* How many counters are allocated? */
+static int l2x0_pmu_num_active_counters(void)
+{
+	int i, cnt = 0;
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			cnt++;
+	}
+
+	return cnt;
+}
+
+static void l2x0_pmu_counter_config_write(int idx, u32 val)
+{
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_CFG - 4 * idx);
+}
+
+static u32 l2x0_pmu_counter_read(int idx)
+{
+	return readl_relaxed(l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx);
+}
+
+static void l2x0_pmu_counter_write(int idx, u32 val)
+{
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx);
+}
+
+static void __l2x0_pmu_enable(void)
+{
+	u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL);
+	val |= L2X0_EVENT_CNT_CTRL_ENABLE;
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL);
+}
+
+static void __l2x0_pmu_disable(void)
+{
+	u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL);
+	val &= ~L2X0_EVENT_CNT_CTRL_ENABLE;
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL);
+}
+
+static void l2x0_pmu_enable(struct pmu *pmu)
+{
+	if (l2x0_pmu_num_active_counters() == 0)
+		return;
+
+	__l2x0_pmu_enable();
+}
+
+static void l2x0_pmu_disable(struct pmu *pmu)
+{
+	if (l2x0_pmu_num_active_counters() == 0)
+		return;
+
+	__l2x0_pmu_disable();
+}
+
+static void warn_if_saturated(u32 count)
+{
+	if (count != 0xffffffff)
+		return;
+
+	pr_warn_ratelimited("L2X0 counter saturated. Poll period too long\n");
+}
+
+static void l2x0_pmu_event_read(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+	u64 prev_count, new_count, mask;
+
+	do {
+		 prev_count = local64_read(&hw->prev_count);
+		 new_count = l2x0_pmu_counter_read(hw->idx);
+	} while (local64_xchg(&hw->prev_count, new_count) != prev_count);
+
+	mask = GENMASK_ULL(31, 0);
+	local64_add((new_count - prev_count) & mask, &event->count);
+
+	warn_if_saturated(new_count);
+}
+
+static void l2x0_pmu_event_configure(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	/*
+	 * The L2X0 counters saturate at 0xffffffff rather than wrapping, so we
+	 * will *always* lose some number of events when a counter saturates,
+	 * and have no way of detecting how many were lost.
+	 *
+	 * To minimize the impact of this, we try to maximize the period by
+	 * always starting counters at zero. To ensure that group ratios are
+	 * representative, we poll periodically to avoid counters saturating.
+	 * See l2x0_pmu_poll().
+	 */
+	local64_set(&hw->prev_count, 0);
+	l2x0_pmu_counter_write(hw->idx, 0);
+}
+
+static enum hrtimer_restart l2x0_pmu_poll(struct hrtimer *hrtimer)
+{
+	unsigned long flags;
+	int i;
+
+	local_irq_save(flags);
+	__l2x0_pmu_disable();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		struct perf_event *event = events[i];
+
+		if (!event)
+			continue;
+
+		l2x0_pmu_event_read(event);
+		l2x0_pmu_event_configure(event);
+	}
+
+	__l2x0_pmu_enable();
+	local_irq_restore(flags);
+
+	hrtimer_forward_now(hrtimer, l2x0_pmu_poll_period);
+	return HRTIMER_RESTART;
+}
+
+
+static void __l2x0_pmu_event_enable(int idx, u32 event)
+{
+	u32 val;
+
+	val = event << L2X0_EVENT_CNT_CFG_SRC_SHIFT;
+	val |= L2X0_EVENT_CNT_CFG_INT_DISABLED;
+	l2x0_pmu_counter_config_write(idx, val);
+}
+
+static void l2x0_pmu_event_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(hw->state & PERF_HES_UPTODATE));
+		l2x0_pmu_event_configure(event);
+	}
+
+	hw->state = 0;
+
+	__l2x0_pmu_event_enable(hw->idx, hw->config_base);
+}
+
+static void __l2x0_pmu_event_disable(int idx)
+{
+	u32 val;
+
+	val = L2X0_EVENT_CNT_CFG_SRC_DISABLED << L2X0_EVENT_CNT_CFG_SRC_SHIFT;
+	val |= L2X0_EVENT_CNT_CFG_INT_DISABLED;
+	l2x0_pmu_counter_config_write(idx, val);
+}
+
+static void l2x0_pmu_event_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(event->hw.state & PERF_HES_STOPPED))
+		return;
+
+	__l2x0_pmu_event_disable(hw->idx);
+
+	hw->state |= PERF_HES_STOPPED;
+
+	if (flags & PERF_EF_UPDATE) {
+		l2x0_pmu_event_read(event);
+		hw->state |= PERF_HES_UPTODATE;
+	}
+}
+
+static int l2x0_pmu_event_add(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+	int idx = l2x0_pmu_find_idx();
+
+	if (idx == -1)
+		return -EAGAIN;
+
+	/*
+	 * Pin the timer, so that the overflows are handled by the chosen
+	 * event->cpu (this is the same one as presented in "cpumask"
+	 * attribute).
+	 */
+	if (l2x0_pmu_num_active_counters() == 0)
+		hrtimer_start(&l2x0_pmu_hrtimer, l2x0_pmu_poll_period,
+			      HRTIMER_MODE_REL_PINNED);
+
+	events[idx] = event;
+	hw->idx = idx;
+
+	l2x0_pmu_event_configure(event);
+
+	hw->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+	if (flags & PERF_EF_START)
+		l2x0_pmu_event_start(event, 0);
+
+	return 0;
+}
+
+static void l2x0_pmu_event_del(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	l2x0_pmu_event_stop(event, PERF_EF_UPDATE);
+
+	events[hw->idx] = NULL;
+	hw->idx = -1;
+
+	if (l2x0_pmu_num_active_counters() == 0)
+		hrtimer_cancel(&l2x0_pmu_hrtimer);
+}
+
+static bool l2x0_pmu_group_is_valid(struct perf_event *event)
+{
+	struct pmu *pmu = event->pmu;
+	struct perf_event *leader = event->group_leader;
+	struct perf_event *sibling;
+	int num_hw = 0;
+
+	if (leader->pmu == pmu)
+		num_hw++;
+	else if (!is_software_event(leader))
+		return false;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (sibling->pmu == pmu)
+			num_hw++;
+		else if (!is_software_event(sibling))
+			return false;
+	}
+
+	return num_hw <= PMU_NR_COUNTERS;
+}
+
+static int l2x0_pmu_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (event->attr.type != l2x0_pmu->type)
+		return -ENOENT;
+
+	if (is_sampling_event(event) ||
+	    event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	if (event->attr.exclude_user   ||
+	    event->attr.exclude_kernel ||
+	    event->attr.exclude_hv     ||
+	    event->attr.exclude_idle   ||
+	    event->attr.exclude_host   ||
+	    event->attr.exclude_guest)
+		return -EINVAL;
+
+	if (event->cpu < 0)
+		return -EINVAL;
+
+	if (event->attr.config & ~L2X0_EVENT_CNT_CFG_SRC_MASK)
+		return -EINVAL;
+
+	hw->config_base = event->attr.config;
+
+	if (!l2x0_pmu_group_is_valid(event))
+		return -EINVAL;
+
+	event->cpu = cpumask_first(&pmu_cpu);
+
+	return 0;
+}
+
+struct l2x0_event_attribute {
+	struct device_attribute attr;
+	unsigned int config;
+	bool pl310_only;
+};
+
+#define L2X0_EVENT_ATTR(_name, _config, _pl310_only)				\
+	(&((struct l2x0_event_attribute[]) {{					\
+		.attr = __ATTR(_name, S_IRUGO, l2x0_pmu_event_show, NULL),	\
+		.config = _config,						\
+		.pl310_only = _pl310_only,					\
+	}})[0].attr.attr)
+
+#define L220_PLUS_EVENT_ATTR(_name, _config)					\
+	L2X0_EVENT_ATTR(_name, _config, false)
+
+#define PL310_EVENT_ATTR(_name, _config)					\
+	L2X0_EVENT_ATTR(_name, _config, true)
+
+static ssize_t l2x0_pmu_event_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct l2x0_event_attribute *lattr;
+
+	lattr = container_of(attr, typeof(*lattr), attr);
+	return snprintf(buf, PAGE_SIZE, "config=0x%x\n", lattr->config);
+}
+
+static umode_t l2x0_pmu_event_attr_is_visible(struct kobject *kobj,
+					      struct attribute *attr,
+					      int unused)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pmu *pmu = dev_get_drvdata(dev);
+	struct l2x0_event_attribute *lattr;
+
+	lattr = container_of(attr, typeof(*lattr), attr.attr);
+
+	if (!lattr->pl310_only || strcmp("l2c_310", pmu->name) == 0)
+		return attr->mode;
+
+	return 0;
+}
+
+static struct attribute *l2x0_pmu_event_attrs[] = {
+	L220_PLUS_EVENT_ATTR(co,	0x1),
+	L220_PLUS_EVENT_ATTR(drhit,	0x2),
+	L220_PLUS_EVENT_ATTR(drreq,	0x3),
+	L220_PLUS_EVENT_ATTR(dwhit,	0x4),
+	L220_PLUS_EVENT_ATTR(dwreq,	0x5),
+	L220_PLUS_EVENT_ATTR(dwtreq,	0x6),
+	L220_PLUS_EVENT_ATTR(irhit,	0x7),
+	L220_PLUS_EVENT_ATTR(irreq,	0x8),
+	L220_PLUS_EVENT_ATTR(wa,	0x9),
+	PL310_EVENT_ATTR(ipfalloc,	0xa),
+	PL310_EVENT_ATTR(epfhit,	0xb),
+	PL310_EVENT_ATTR(epfalloc,	0xc),
+	PL310_EVENT_ATTR(srrcvd,	0xd),
+	PL310_EVENT_ATTR(srconf,	0xe),
+	PL310_EVENT_ATTR(epfrcvd,	0xf),
+	NULL
+};
+
+static struct attribute_group l2x0_pmu_event_attrs_group = {
+	.name = "events",
+	.attrs = l2x0_pmu_event_attrs,
+	.is_visible = l2x0_pmu_event_attr_is_visible,
+};
+
+static ssize_t l2x0_pmu_cpumask_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return cpumap_print_to_pagebuf(true, buf, &pmu_cpu);
+}
+
+static struct device_attribute l2x0_pmu_cpumask_attr =
+		__ATTR(cpumask, S_IRUGO, l2x0_pmu_cpumask_show, NULL);
+
+static struct attribute *l2x0_pmu_cpumask_attrs[] = {
+	&l2x0_pmu_cpumask_attr.attr,
+	NULL,
+};
+
+static struct attribute_group l2x0_pmu_cpumask_attr_group = {
+	.attrs = l2x0_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *l2x0_pmu_attr_groups[] = {
+	&l2x0_pmu_event_attrs_group,
+	&l2x0_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static void l2x0_pmu_reset(void)
+{
+	int i;
+
+	__l2x0_pmu_disable();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++)
+		__l2x0_pmu_event_disable(i);
+}
+
+static int l2x0_pmu_offline_cpu(unsigned int cpu)
+{
+	unsigned int target;
+
+	if (!cpumask_test_and_clear_cpu(cpu, &pmu_cpu))
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	perf_pmu_migrate_context(l2x0_pmu, cpu, target);
+	cpumask_set_cpu(target, &pmu_cpu);
+
+	return 0;
+}
+
+void l2x0_pmu_suspend(void)
+{
+	int i;
+
+	if (!l2x0_pmu)
+		return;
+
+	l2x0_pmu_disable(l2x0_pmu);
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			l2x0_pmu_event_stop(events[i], PERF_EF_UPDATE);
+	}
+
+}
+
+void l2x0_pmu_resume(void)
+{
+	int i;
+
+	if (!l2x0_pmu)
+		return;
+
+	l2x0_pmu_reset();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			l2x0_pmu_event_start(events[i], PERF_EF_RELOAD);
+	}
+
+	l2x0_pmu_enable(l2x0_pmu);
+}
+
+void __init l2x0_pmu_register(void __iomem *base, u32 part)
+{
+	/*
+	 * Determine whether we support the PMU, and choose the name for sysfs.
+	 * This is also used by l2x0_pmu_event_attr_is_visible to determine
+	 * which events to display, as the PL310 PMU supports a superset of
+	 * L220 events.
+	 *
+	 * The L210 PMU has a different programmer's interface, and is not
+	 * supported by this driver.
+	 *
+	 * We must defer registering the PMU until the perf subsystem is up and
+	 * running, so just stash the name and base, and leave that to another
+	 * initcall.
+	 */
+	switch (part & L2X0_CACHE_ID_PART_MASK) {
+	case L2X0_CACHE_ID_PART_L220:
+		l2x0_name = "l2c_220";
+		break;
+	case L2X0_CACHE_ID_PART_L310:
+		l2x0_name = "l2c_310";
+		break;
+	default:
+		return;
+	}
+
+	l2x0_base = base;
+}
+
+static __init int l2x0_pmu_init(void)
+{
+	int ret;
+
+	if (!l2x0_base)
+		return 0;
+
+	l2x0_pmu = kzalloc(sizeof(*l2x0_pmu), GFP_KERNEL);
+	if (!l2x0_pmu) {
+		pr_warn("Unable to allocate L2x0 PMU\n");
+		return -ENOMEM;
+	}
+
+	*l2x0_pmu = (struct pmu) {
+		.task_ctx_nr = perf_invalid_context,
+		.pmu_enable = l2x0_pmu_enable,
+		.pmu_disable = l2x0_pmu_disable,
+		.read = l2x0_pmu_event_read,
+		.start = l2x0_pmu_event_start,
+		.stop = l2x0_pmu_event_stop,
+		.add = l2x0_pmu_event_add,
+		.del = l2x0_pmu_event_del,
+		.event_init = l2x0_pmu_event_init,
+		.attr_groups = l2x0_pmu_attr_groups,
+	};
+
+	l2x0_pmu_reset();
+
+	/*
+	 * We always use a hrtimer rather than an interrupt.
+	 * See comments in l2x0_pmu_event_configure and l2x0_pmu_poll.
+	 *
+	 * Polling once a second allows the counters to fill up to 1/128th on a
+	 * quad-core test chip with cores clocked at 400MHz. Hopefully this
+	 * leaves sufficient headroom to avoid overflow on production silicon
+	 * at higher frequencies.
+	 */
+	l2x0_pmu_poll_period = ms_to_ktime(1000);
+	hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	l2x0_pmu_hrtimer.function = l2x0_pmu_poll;
+
+	cpumask_set_cpu(0, &pmu_cpu);
+	ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE,
+					"AP_PERF_ARM_L2X0_ONLINE", NULL,
+					l2x0_pmu_offline_cpu);
+	if (ret)
+		goto out_pmu;
+
+	ret = perf_pmu_register(l2x0_pmu, l2x0_name, -1);
+	if (ret)
+		goto out_cpuhp;
+
+	return 0;
+
+out_cpuhp:
+	cpuhp_remove_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE);
+out_pmu:
+	kfree(l2x0_pmu);
+	l2x0_pmu = NULL;
+	return ret;
+}
+device_initcall(l2x0_pmu_init);
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index cc12905..d1870c7 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -142,6 +142,8 @@ static void l2c_disable(void)
 {
 	void __iomem *base = l2x0_base;
 
+	l2x0_pmu_suspend();
+
 	outer_cache.flush_all();
 	l2c_write_sec(0, base, L2X0_CTRL);
 	dsb(st);
@@ -159,6 +161,8 @@ static void l2c_resume(void)
 	/* Do not touch the controller if already enabled. */
 	if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN))
 		l2c_enable(base, l2x0_data->num_lock);
+
+	l2x0_pmu_resume();
 }
 
 /*
@@ -709,9 +713,8 @@ static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
 	if (revision >= L310_CACHE_ID_RTL_R3P0 &&
 	    revision < L310_CACHE_ID_RTL_R3P2) {
 		u32 val = l2x0_saved_regs.prefetch_ctrl;
-		/* I don't think bit23 is required here... but iMX6 does so */
-		if (val & (BIT(30) | BIT(23))) {
-			val &= ~(BIT(30) | BIT(23));
+		if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) {
+			val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL;
 			l2x0_saved_regs.prefetch_ctrl = val;
 			errata[n++] = "752271";
 		}
@@ -892,6 +895,8 @@ static int __init __l2c_init(const struct l2c_init_data *data,
 	pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
 		data->type, cache_id, aux);
 
+	l2x0_pmu_register(l2x0_base, cache_id);
+
 	return 0;
 }
 
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
index c8e2f49..dfe97b4 100644
--- a/arch/arm/mm/cache-uniphier.c
+++ b/arch/arm/mm/cache-uniphier.c
@@ -1,5 +1,6 @@
 /*
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -43,27 +44,15 @@
 #define    UNIPHIER_SSCOPE_CM_SYNC		0x8	/* sync (drain bufs) */
 #define    UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH	0x9	/* flush p-fetch buf */
 #define UNIPHIER_SSCOQM		0x248	/* Cache Operation Queue Mode */
-#define    UNIPHIER_SSCOQM_TID_MASK		(0x3 << 21)
-#define    UNIPHIER_SSCOQM_TID_LRU_DATA		(0x0 << 21)
-#define    UNIPHIER_SSCOQM_TID_LRU_INST		(0x1 << 21)
-#define    UNIPHIER_SSCOQM_TID_WAY		(0x2 << 21)
 #define    UNIPHIER_SSCOQM_S_MASK		(0x3 << 17)
 #define    UNIPHIER_SSCOQM_S_RANGE		(0x0 << 17)
 #define    UNIPHIER_SSCOQM_S_ALL		(0x1 << 17)
-#define    UNIPHIER_SSCOQM_S_WAY		(0x2 << 17)
 #define    UNIPHIER_SSCOQM_CE			BIT(15)	/* notify completion */
 #define    UNIPHIER_SSCOQM_CM_INV		0x0	/* invalidate */
 #define    UNIPHIER_SSCOQM_CM_CLEAN		0x1	/* clean */
 #define    UNIPHIER_SSCOQM_CM_FLUSH		0x2	/* flush */
-#define    UNIPHIER_SSCOQM_CM_PREFETCH		0x3	/* prefetch to cache */
-#define    UNIPHIER_SSCOQM_CM_PREFETCH_BUF	0x4	/* prefetch to pf-buf */
-#define    UNIPHIER_SSCOQM_CM_TOUCH		0x5	/* touch */
-#define    UNIPHIER_SSCOQM_CM_TOUCH_ZERO	0x6	/* touch to zero */
-#define    UNIPHIER_SSCOQM_CM_TOUCH_DIRTY	0x7	/* touch with dirty */
 #define UNIPHIER_SSCOQAD	0x24c	/* Cache Operation Queue Address */
 #define UNIPHIER_SSCOQSZ	0x250	/* Cache Operation Queue Size */
-#define UNIPHIER_SSCOQMASK	0x254	/* Cache Operation Queue Address Mask */
-#define UNIPHIER_SSCOQWN	0x258	/* Cache Operation Queue Way Number */
 #define UNIPHIER_SSCOPPQSEF	0x25c	/* Cache Operation Queue Set Complete*/
 #define    UNIPHIER_SSCOPPQSEF_FE		BIT(1)
 #define    UNIPHIER_SSCOPPQSEF_OE		BIT(0)
@@ -72,9 +61,6 @@
 #define    UNIPHIER_SSCOLPQS_EST		BIT(1)
 #define    UNIPHIER_SSCOLPQS_QST		BIT(0)
 
-/* Is the touch/pre-fetch destination specified by ways? */
-#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
-		((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
 /* Is the operation region specified by address range? */
 #define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
 		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
@@ -178,11 +164,6 @@ static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
 			writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
 			writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
 		}
-
-		/* set target ways if needed */
-		if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
-			writel_relaxed(data->way_locked_mask,
-				       data->op_base + UNIPHIER_SSCOQWN);
 	} while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
 			  (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
 
@@ -338,46 +319,8 @@ static void uniphier_cache_sync(void)
 		__uniphier_cache_sync(data);
 }
 
-int __init uniphier_cache_l2_is_enabled(void)
-{
-	struct uniphier_cache_data *data;
-
-	data = list_first_entry_or_null(&uniphier_cache_list,
-					struct uniphier_cache_data, list);
-	if (!data)
-		return 0;
-
-	return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
-		  UNIPHIER_SSCC_ON);
-}
-
-void __init uniphier_cache_l2_touch_range(unsigned long start,
-					  unsigned long end)
-{
-	struct uniphier_cache_data *data;
-
-	data = list_first_entry_or_null(&uniphier_cache_list,
-					struct uniphier_cache_data, list);
-	if (data)
-		__uniphier_cache_maint_range(data, start, end,
-					     UNIPHIER_SSCOQM_TID_WAY |
-					     UNIPHIER_SSCOQM_CM_TOUCH);
-}
-
-void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
-{
-	struct uniphier_cache_data *data;
-
-	data = list_first_entry_or_null(&uniphier_cache_list,
-					struct uniphier_cache_data, list);
-	if (data)
-		__uniphier_cache_set_locked_ways(data, way_mask);
-}
-
 static const struct of_device_id uniphier_cache_match[] __initconst = {
-	{
-		.compatible = "socionext,uniphier-system-cache",
-	},
+	{ .compatible = "socionext,uniphier-system-cache" },
 	{ /* sentinel */ }
 };
 
diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S
new file mode 100644
index 0000000..816a7e4
--- /dev/null
+++ b/arch/arm/mm/cache-v7m.S
@@ -0,0 +1,453 @@
+/*
+ *  linux/arch/arm/mm/cache-v7m.S
+ *
+ *  Based on linux/arch/arm/mm/cache-v7.S
+ *
+ *  Copyright (C) 2001 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This is the "shell" of the ARMv7M processor support.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/unwind.h>
+#include <asm/v7m.h>
+
+#include "proc-macros.S"
+
+/* Generic V7M read/write macros for memory mapped cache operations */
+.macro v7m_cache_read, rt, reg
+	movw	\rt, #:lower16:BASEADDR_V7M_SCB + \reg
+	movt	\rt, #:upper16:BASEADDR_V7M_SCB + \reg
+	ldr     \rt, [\rt]
+.endm
+
+.macro v7m_cacheop, rt, tmp, op, c = al
+	movw\c	\tmp, #:lower16:BASEADDR_V7M_SCB + \op
+	movt\c	\tmp, #:upper16:BASEADDR_V7M_SCB + \op
+	str\c	\rt, [\tmp]
+.endm
+
+
+.macro	read_ccsidr, rt
+	v7m_cache_read \rt, V7M_SCB_CCSIDR
+.endm
+
+.macro read_clidr, rt
+	v7m_cache_read \rt, V7M_SCB_CLIDR
+.endm
+
+.macro	write_csselr, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_CSSELR
+.endm
+
+/*
+ * dcisw: Invalidate data cache by set/way
+ */
+.macro dcisw, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCISW
+.endm
+
+/*
+ * dccisw: Clean and invalidate data cache by set/way
+ */
+.macro dccisw, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCCISW
+.endm
+
+/*
+ * dccimvac: Clean and invalidate data cache line by MVA to PoC.
+ */
+.irp    c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+.macro dccimvac\c, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCCIMVAC, \c
+.endm
+.endr
+
+/*
+ * dcimvac: Invalidate data cache line by MVA to PoC
+ */
+.macro dcimvac, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC
+.endm
+
+/*
+ * dccmvau: Clean data cache line by MVA to PoU
+ */
+.macro dccmvau, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAU
+.endm
+
+/*
+ * dccmvac: Clean data cache line by MVA to PoC
+ */
+.macro dccmvac,  rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAC
+.endm
+
+/*
+ * icimvau: Invalidate instruction caches by MVA to PoU
+ */
+.macro icimvau, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_ICIMVAU
+.endm
+
+/*
+ * Invalidate the icache, inner shareable if SMP, invalidate BTB for UP.
+ * rt data ignored by ICIALLU(IS), so can be used for the address
+ */
+.macro invalidate_icache, rt
+	v7m_cacheop \rt, \rt, V7M_SCB_ICIALLU
+	mov \rt, #0
+.endm
+
+/*
+ * Invalidate the BTB, inner shareable if SMP.
+ * rt data ignored by BPIALL, so it can be used for the address
+ */
+.macro invalidate_bp, rt
+	v7m_cacheop \rt, \rt, V7M_SCB_BPIALL
+	mov \rt, #0
+.endm
+
+ENTRY(v7m_invalidate_l1)
+	mov	r0, #0
+
+	write_csselr r0, r1
+	read_ccsidr r0
+
+	movw	r1, #0x7fff
+	and	r2, r1, r0, lsr #13
+
+	movw	r1, #0x3ff
+
+	and	r3, r1, r0, lsr #3      @ NumWays - 1
+	add	r2, r2, #1              @ NumSets
+
+	and	r0, r0, #0x7
+	add	r0, r0, #4      @ SetShift
+
+	clz	r1, r3          @ WayShift
+	add	r4, r3, #1      @ NumWays
+1:	sub	r2, r2, #1      @ NumSets--
+	mov	r3, r4          @ Temp = NumWays
+2:	subs	r3, r3, #1      @ Temp--
+	mov	r5, r3, lsl r1
+	mov	r6, r2, lsl r0
+	orr	r5, r5, r6      @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+	dcisw	r5, r6
+	bgt	2b
+	cmp	r2, #0
+	bgt	1b
+	dsb	st
+	isb
+	ret	lr
+ENDPROC(v7m_invalidate_l1)
+
+/*
+ *	v7m_flush_icache_all()
+ *
+ *	Flush the whole I-cache.
+ *
+ *	Registers:
+ *	r0 - set to 0
+ */
+ENTRY(v7m_flush_icache_all)
+	invalidate_icache r0
+	ret	lr
+ENDPROC(v7m_flush_icache_all)
+
+/*
+ *	v7m_flush_dcache_all()
+ *
+ *	Flush the whole D-cache.
+ *
+ *	Corrupted registers: r0-r7, r9-r11
+ */
+ENTRY(v7m_flush_dcache_all)
+	dmb					@ ensure ordering with previous memory accesses
+	read_clidr r0
+	mov	r3, r0, lsr #23			@ move LoC into position
+	ands	r3, r3, #7 << 1			@ extract LoC*2 from clidr
+	beq	finished			@ if loc is 0, then no need to clean
+start_flush_levels:
+	mov	r10, #0				@ start clean at cache level 0
+flush_levels:
+	add	r2, r10, r10, lsr #1		@ work out 3x current cache level
+	mov	r1, r0, lsr r2			@ extract cache type bits from clidr
+	and	r1, r1, #7			@ mask of the bits for current cache only
+	cmp	r1, #2				@ see what cache we have at this level
+	blt	skip				@ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPT
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
+#endif
+	write_csselr r10, r1			@ set current cache level
+	isb					@ isb to sych the new cssr&csidr
+	read_ccsidr r1				@ read the new csidr
+#ifdef CONFIG_PREEMPT
+	restore_irqs_notrace r9
+#endif
+	and	r2, r1, #7			@ extract the length of the cache lines
+	add	r2, r2, #4			@ add 4 (line length offset)
+	movw	r4, #0x3ff
+	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
+	clz	r5, r4				@ find bit position of way size increment
+	movw	r7, #0x7fff
+	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+loop1:
+	mov	r9, r7				@ create working copy of max index
+loop2:
+	lsl	r6, r4, r5
+	orr	r11, r10, r6			@ factor way and cache number into r11
+	lsl	r6, r9, r2
+	orr	r11, r11, r6			@ factor index number into r11
+	dccisw	r11, r6				@ clean/invalidate by set/way
+	subs	r9, r9, #1			@ decrement the index
+	bge	loop2
+	subs	r4, r4, #1			@ decrement the way
+	bge	loop1
+skip:
+	add	r10, r10, #2			@ increment cache number
+	cmp	r3, r10
+	bgt	flush_levels
+finished:
+	mov	r10, #0				@ swith back to cache level 0
+	write_csselr r10, r3			@ select current cache level in cssr
+	dsb	st
+	isb
+	ret	lr
+ENDPROC(v7m_flush_dcache_all)
+
+/*
+ *	v7m_flush_cache_all()
+ *
+ *	Flush the entire cache system.
+ *  The data cache flush is now achieved using atomic clean / invalidates
+ *  working outwards from L1 cache. This is done using Set/Way based cache
+ *  maintenance instructions.
+ *  The instruction cache can still be invalidated back to the point of
+ *  unification in a single instruction.
+ *
+ */
+ENTRY(v7m_flush_kern_cache_all)
+	stmfd	sp!, {r4-r7, r9-r11, lr}
+	bl	v7m_flush_dcache_all
+	invalidate_icache r0
+	ldmfd	sp!, {r4-r7, r9-r11, lr}
+	ret	lr
+ENDPROC(v7m_flush_kern_cache_all)
+
+/*
+ *	v7m_flush_cache_all()
+ *
+ *	Flush all TLB entries in a particular address space
+ *
+ *	- mm    - mm_struct describing address space
+ */
+ENTRY(v7m_flush_user_cache_all)
+	/*FALLTHROUGH*/
+
+/*
+ *	v7m_flush_cache_range(start, end, flags)
+ *
+ *	Flush a range of TLB entries in the specified address space.
+ *
+ *	- start - start address (may not be aligned)
+ *	- end   - end address (exclusive, may not be aligned)
+ *	- flags	- vm_area_struct flags describing address space
+ *
+ *	It is assumed that:
+ *	- we have a VIPT cache.
+ */
+ENTRY(v7m_flush_user_cache_range)
+	ret	lr
+ENDPROC(v7m_flush_user_cache_all)
+ENDPROC(v7m_flush_user_cache_range)
+
+/*
+ *	v7m_coherent_kern_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v7m_coherent_kern_range)
+	/* FALLTHROUGH */
+
+/*
+ *	v7m_coherent_user_range(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified
+ *	region.  This is typically used when code has been written to
+ *	a memory region, and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *
+ *	It is assumed that:
+ *	- the Icache does not read data from the write buffer
+ */
+ENTRY(v7m_coherent_user_range)
+ UNWIND(.fnstart		)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
+1:
+/*
+ * We use open coded version of dccmvau otherwise USER() would
+ * point at movw instruction.
+ */
+	dccmvau	r12, r3
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	1b
+	dsb	ishst
+	icache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
+2:
+	icimvau r12, r3
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	2b
+	invalidate_bp r0
+	dsb	ishst
+	isb
+	ret	lr
+ UNWIND(.fnend		)
+ENDPROC(v7m_coherent_kern_range)
+ENDPROC(v7m_coherent_user_range)
+
+/*
+ *	v7m_flush_kern_dcache_area(void *addr, size_t size)
+ *
+ *	Ensure that the data held in the page kaddr is written back
+ *	to the page in question.
+ *
+ *	- addr	- kernel address
+ *	- size	- region size
+ */
+ENTRY(v7m_flush_kern_dcache_area)
+	dcache_line_size r2, r3
+	add	r1, r0, r1
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+1:
+	dccimvac r0, r3		@ clean & invalidate D line / unified line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+ENDPROC(v7m_flush_kern_dcache_area)
+
+/*
+ *	v7m_dma_inv_range(start,end)
+ *
+ *	Invalidate the data cache within the specified region; we will
+ *	be performing a DMA operation in this region and we want to
+ *	purge old data in the cache.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+v7m_dma_inv_range:
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	tst	r0, r3
+	bic	r0, r0, r3
+	dccimvacne r0, r3
+	subne	r3, r2, #1	@ restore r3, corrupted by v7m's dccimvac
+	tst	r1, r3
+	bic	r1, r1, r3
+	dccimvacne r1, r3
+1:
+	dcimvac r0, r3
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+ENDPROC(v7m_dma_inv_range)
+
+/*
+ *	v7m_dma_clean_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+v7m_dma_clean_range:
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+1:
+	dccmvac r0, r3			@ clean D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+ENDPROC(v7m_dma_clean_range)
+
+/*
+ *	v7m_dma_flush_range(start,end)
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+ENTRY(v7m_dma_flush_range)
+	dcache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r0, r0, r3
+1:
+	dccimvac r0, r3			 @ clean & invalidate D / U line
+	add	r0, r0, r2
+	cmp	r0, r1
+	blo	1b
+	dsb	st
+	ret	lr
+ENDPROC(v7m_dma_flush_range)
+
+/*
+ *	dma_map_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v7m_dma_map_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_FROM_DEVICE
+	beq	v7m_dma_inv_range
+	b	v7m_dma_clean_range
+ENDPROC(v7m_dma_map_area)
+
+/*
+ *	dma_unmap_area(start, size, dir)
+ *	- start	- kernel virtual start address
+ *	- size	- size of region
+ *	- dir	- DMA direction
+ */
+ENTRY(v7m_dma_unmap_area)
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v7m_dma_inv_range
+	ret	lr
+ENDPROC(v7m_dma_unmap_area)
+
+	.globl	v7m_flush_kern_cache_louis
+	.equ	v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all
+
+	__INITDATA
+
+	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+	define_cache_functions v7m
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c6834c0..ab4f745 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -436,7 +436,7 @@ static int __init atomic_pool_init(void)
 		gen_pool_set_algo(atomic_pool,
 				gen_pool_first_fit_order_align,
 				(void *)PAGE_SHIFT);
-		pr_info("DMA: preallocated %zd KiB pool for atomic coherent allocations\n",
+		pr_info("DMA: preallocated %zu KiB pool for atomic coherent allocations\n",
 		       atomic_pool_size / 1024);
 		return 0;
 	}
@@ -445,7 +445,7 @@ destroy_genpool:
 	gen_pool_destroy(atomic_pool);
 	atomic_pool = NULL;
 out:
-	pr_err("DMA: failed to allocate %zx KiB pool for atomic coherent allocation\n",
+	pr_err("DMA: failed to allocate %zu KiB pool for atomic coherent allocation\n",
 	       atomic_pool_size / 1024);
 	return -ENOMEM;
 }
@@ -2014,6 +2014,63 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle,
 	__free_iova(mapping, iova, len);
 }
 
+/**
+ * arm_iommu_map_resource - map a device resource for DMA
+ * @dev: valid struct device pointer
+ * @phys_addr: physical address of resource
+ * @size: size of resource to map
+ * @dir: DMA transfer direction
+ */
+static dma_addr_t arm_iommu_map_resource(struct device *dev,
+		phys_addr_t phys_addr, size_t size,
+		enum dma_data_direction dir, unsigned long attrs)
+{
+	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+	dma_addr_t dma_addr;
+	int ret, prot;
+	phys_addr_t addr = phys_addr & PAGE_MASK;
+	unsigned int offset = phys_addr & ~PAGE_MASK;
+	size_t len = PAGE_ALIGN(size + offset);
+
+	dma_addr = __alloc_iova(mapping, len);
+	if (dma_addr == DMA_ERROR_CODE)
+		return dma_addr;
+
+	prot = __dma_direction_to_prot(dir) | IOMMU_MMIO;
+
+	ret = iommu_map(mapping->domain, dma_addr, addr, len, prot);
+	if (ret < 0)
+		goto fail;
+
+	return dma_addr + offset;
+fail:
+	__free_iova(mapping, dma_addr, len);
+	return DMA_ERROR_CODE;
+}
+
+/**
+ * arm_iommu_unmap_resource - unmap a device DMA resource
+ * @dev: valid struct device pointer
+ * @dma_handle: DMA address to resource
+ * @size: size of resource to map
+ * @dir: DMA transfer direction
+ */
+static void arm_iommu_unmap_resource(struct device *dev, dma_addr_t dma_handle,
+		size_t size, enum dma_data_direction dir,
+		unsigned long attrs)
+{
+	struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+	dma_addr_t iova = dma_handle & PAGE_MASK;
+	unsigned int offset = dma_handle & ~PAGE_MASK;
+	size_t len = PAGE_ALIGN(size + offset);
+
+	if (!iova)
+		return;
+
+	iommu_unmap(mapping->domain, iova, len);
+	__free_iova(mapping, iova, len);
+}
+
 static void arm_iommu_sync_single_for_cpu(struct device *dev,
 		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
@@ -2057,6 +2114,9 @@ struct dma_map_ops iommu_ops = {
 	.unmap_sg		= arm_iommu_unmap_sg,
 	.sync_sg_for_cpu	= arm_iommu_sync_sg_for_cpu,
 	.sync_sg_for_device	= arm_iommu_sync_sg_for_device,
+
+	.map_resource		= arm_iommu_map_resource,
+	.unmap_resource		= arm_iommu_unmap_resource,
 };
 
 struct dma_map_ops iommu_coherent_ops = {
@@ -2070,6 +2130,9 @@ struct dma_map_ops iommu_coherent_ops = {
 
 	.map_sg		= arm_coherent_iommu_map_sg,
 	.unmap_sg	= arm_coherent_iommu_unmap_sg,
+
+	.map_resource	= arm_iommu_map_resource,
+	.unmap_resource	= arm_iommu_unmap_resource,
 };
 
 /**
diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h
index 05ec5e0..67532f2 100644
--- a/arch/arm/mm/fault.h
+++ b/arch/arm/mm/fault.h
@@ -23,7 +23,6 @@ static inline int fsr_fs(unsigned int fsr)
 #endif
 
 void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-unsigned long search_exception_table(unsigned long addr);
 void early_abt_enable(void);
 
 #endif	/* __ARCH_ARM_FAULT_H */
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6344913..4001dd1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -137,7 +137,7 @@ void __init init_default_cache_policy(unsigned long pmd)
 
 	initial_pmd_value = pmd;
 
-	pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE;
+	pmd &= PMD_SECT_CACHE_MASK;
 
 	for (i = 0; i < ARRAY_SIZE(cache_policies); i++)
 		if (cache_policies[i].pmd == pmd) {
@@ -243,7 +243,7 @@ __setup("noalign", noalign_setup);
 #define PROT_PTE_S2_DEVICE	PROT_PTE_DEVICE
 #define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 
-static struct mem_type mem_types[] = {
+static struct mem_type mem_types[] __ro_after_init = {
 	[MT_DEVICE] = {		  /* Strongly ordered / ARMv6 shared device */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 				  L_PTE_SHARED,
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index c671f34..0d40c28 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -7,6 +7,10 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 
+#ifdef CONFIG_CPU_V7M
+#include <asm/v7m.h>
+#endif
+
 /*
  * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
  */
@@ -70,7 +74,13 @@
  * on ARMv7.
  */
 	.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+	ldr     \tmp, [\tmp]
+#else
 	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
 	lsr	\tmp, \tmp, #16
 	and	\tmp, \tmp, #0xf		@ cache line size encoding
 	mov	\reg, #4			@ bytes per word
@@ -82,7 +92,13 @@
  * on ARMv7.
  */
 	.macro	icache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+	movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+	movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+	ldr     \tmp, [\tmp]
+#else
 	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
 	and	\tmp, \tmp, #0xf		@ cache line size encoding
 	mov	\reg, #4			@ bytes per word
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index a7123b4..d00d52c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -16,6 +16,7 @@
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
+#include <asm/memory.h>
 
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 7229d8d..f6d333f 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -74,14 +74,42 @@ ENTRY(cpu_v7m_do_resume)
 ENDPROC(cpu_v7m_do_resume)
 #endif
 
+ENTRY(cpu_cm7_dcache_clean_area)
+	dcache_line_size r2, r3
+	movw	r3, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC
+	movt	r3, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC
+
+1:	str	r0, [r3]		@ clean D entry
+	add	r0, r0, r2
+	subs	r1, r1, r2
+	bhi	1b
+	dsb
+	ret	lr
+ENDPROC(cpu_cm7_dcache_clean_area)
+
+ENTRY(cpu_cm7_proc_fin)
+	movw	r2, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
+	movt	r2, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR)
+	ldr	r0, [r2]
+	bic	r0, r0, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC)
+	str	r0, [r2]
+	ret	lr
+ENDPROC(cpu_cm7_proc_fin)
+
 	.section ".text.init", #alloc, #execinstr
 
+__v7m_cm7_setup:
+	mov	r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)
+	b	__v7m_setup_cont
 /*
  *	__v7m_setup
  *
  *	This should be able to cover all ARMv7-M cores.
  */
 __v7m_setup:
+	mov	r8, 0
+
+__v7m_setup_cont:
 	@ Configure the vector table base address
 	ldr	r0, =BASEADDR_V7M_SCB
 	ldr	r12, =vector_table
@@ -104,6 +132,7 @@ __v7m_setup:
 	badr	r1, 1f
 	ldr	r5, [r12, #11 * 4]	@ read the SVC vector entry
 	str	r1, [r12, #11 * 4]	@ write the temporary SVC vector entry
+	dsb
 	mov	r6, lr			@ save LR
 	ldr	sp, =init_thread_union + THREAD_START_SP
 	cpsie	i
@@ -116,15 +145,32 @@ __v7m_setup:
 	mov	r1, #1
 	msr	control, r1		@ Thread mode has unpriviledged access
 
+	@ Configure caches (if implemented)
+	teq     r8, #0
+	stmneia	r12, {r0-r6, lr}	@ v7m_invalidate_l1 touches r0-r6
+	blne	v7m_invalidate_l1
+	teq     r8, #0			@ re-evalutae condition
+	ldmneia	r12, {r0-r6, lr}
+
 	@ Configure the System Control Register to ensure 8-byte stack alignment
 	@ Note the STKALIGN bit is either RW or RAO.
-	ldr	r12, [r0, V7M_SCB_CCR]	@ system control register
-	orr	r12, #V7M_SCB_CCR_STKALIGN
-	str	r12, [r0, V7M_SCB_CCR]
+	ldr	r0, [r0, V7M_SCB_CCR]   @ system control register
+	orr	r0, #V7M_SCB_CCR_STKALIGN
+	orr	r0, r0, r8
+
 	ret	lr
 ENDPROC(__v7m_setup)
 
+/*
+ * Cortex-M7 processor functions
+ */
+	globl_equ	cpu_cm7_proc_init,	cpu_v7m_proc_init
+	globl_equ	cpu_cm7_reset,		cpu_v7m_reset
+	globl_equ	cpu_cm7_do_idle,	cpu_v7m_do_idle
+	globl_equ	cpu_cm7_switch_mm,	cpu_v7m_switch_mm
+
 	define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
+	define_processor_functions cm7, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
 
 	.section ".rodata"
 	string cpu_arch_name, "armv7m"
@@ -133,6 +179,50 @@ ENDPROC(__v7m_setup)
 
 	.section ".proc.info.init", #alloc
 
+.macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0,  proc_fns = v7m_processor_functions
+	.long	0			/* proc_info_list.__cpu_mm_mmu_flags */
+	.long	0			/* proc_info_list.__cpu_io_mmu_flags */
+	initfn	\initfunc, \name
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \hwcaps
+	.long	cpu_v7m_name
+	.long   \proc_fns
+	.long	0			/* proc_info_list.tlb */
+	.long	0			/* proc_info_list.user */
+	.long	\cache_fns
+.endm
+
+	/*
+	 * Match ARM Cortex-M7 processor.
+	 */
+	.type	__v7m_cm7_proc_info, #object
+__v7m_cm7_proc_info:
+	.long	0x410fc270		/* ARM Cortex-M7 0xC27 */
+	.long	0xff0ffff0		/* Mask off revision, patch release */
+	__v7m_proc __v7m_cm7_proc_info, __v7m_cm7_setup, hwcaps = HWCAP_EDSP, cache_fns = v7m_cache_fns, proc_fns = cm7_processor_functions
+	.size	__v7m_cm7_proc_info, . - __v7m_cm7_proc_info
+
+	/*
+	 * Match ARM Cortex-M4 processor.
+	 */
+	.type	__v7m_cm4_proc_info, #object
+__v7m_cm4_proc_info:
+	.long	0x410fc240		/* ARM Cortex-M4 0xC24 */
+	.long	0xff0ffff0		/* Mask off revision, patch release */
+	__v7m_proc __v7m_cm4_proc_info, __v7m_setup, hwcaps = HWCAP_EDSP
+	.size	__v7m_cm4_proc_info, . - __v7m_cm4_proc_info
+
+	/*
+	 * Match ARM Cortex-M3 processor.
+	 */
+	.type	__v7m_cm3_proc_info, #object
+__v7m_cm3_proc_info:
+	.long	0x410fc230		/* ARM Cortex-M3 0xC23 */
+	.long	0xff0ffff0		/* Mask off revision, patch release */
+	__v7m_proc __v7m_cm3_proc_info, __v7m_setup
+	.size	__v7m_cm3_proc_info, . - __v7m_cm3_proc_info
+
 	/*
 	 * Match any ARMv7-M processor core.
 	 */
@@ -140,16 +230,6 @@ ENDPROC(__v7m_setup)
 __v7m_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
-	.long   0			@ proc_info_list.__cpu_mm_mmu_flags
-	.long   0			@ proc_info_list.__cpu_io_mmu_flags
-	initfn	__v7m_setup, __v7m_proc_info	@ proc_info_list.__cpu_flush
-	.long	cpu_arch_name
-	.long	cpu_elf_name
-	.long	HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT
-	.long	cpu_v7m_name
-	.long	v7m_processor_functions	@ proc_info_list.proc
-	.long	0			@ proc_info_list.tlb
-	.long	0			@ proc_info_list.user
-	.long	nop_cache_fns		@ proc_info_list.cache
+	__v7m_proc __v7m_proc_info, __v7m_setup
 	.size	__v7m_proc_info, . - __v7m_proc_info
 
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 78c8bf4..272f49b 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -52,21 +52,27 @@ void __init orion_clkdev_init(struct clk *tclk)
 static void fill_resources(struct platform_device *device,
 			   struct resource *resources,
 			   resource_size_t mapbase,
-			   resource_size_t size,
-			   unsigned int irq)
+			   resource_size_t size)
 {
 	device->resource = resources;
 	device->num_resources = 1;
 	resources[0].flags = IORESOURCE_MEM;
 	resources[0].start = mapbase;
 	resources[0].end = mapbase + size;
+}
 
-	if (irq != NO_IRQ) {
-		device->num_resources++;
-		resources[1].flags = IORESOURCE_IRQ;
-		resources[1].start = irq;
-		resources[1].end = irq;
-	}
+static void fill_resources_irq(struct platform_device *device,
+			       struct resource *resources,
+			       resource_size_t mapbase,
+			       resource_size_t size,
+			       unsigned int irq)
+{
+	fill_resources(device, resources, mapbase, size);
+
+	device->num_resources++;
+	resources[1].flags = IORESOURCE_IRQ;
+	resources[1].start = irq;
+	resources[1].end = irq;
 }
 
 /*****************************************************************************
@@ -93,7 +99,7 @@ static void __init uart_complete(
 	data->uartclk = uart_get_clk_rate(clk);
 	orion_uart->dev.platform_data = data;
 
-	fill_resources(orion_uart, resources, mapbase, 0xff, irq);
+	fill_resources_irq(orion_uart, resources, mapbase, 0xff, irq);
 	platform_device_register(orion_uart);
 }
 
@@ -305,8 +311,8 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
-	fill_resources(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
+		       mapbase + 0x2000, SZ_16K - 1);
+	fill_resources_irq(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
 			mapbase + 0x2004, 0x84 - 1, irq_err);
 	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
@@ -354,11 +360,10 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
 			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+		       mapbase + 0x2000, SZ_16K - 1);
 	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
@@ -404,11 +409,10 @@ static struct platform_device orion_ge10 = {
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq)
 {
 	fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+		       mapbase + 0x2000, SZ_16K - 1);
 	ge_complete(&orion_ge10_shared_data,
 		    orion_ge10_resources, irq, &orion_ge10_shared,
 		    NULL,
@@ -453,11 +457,10 @@ static struct platform_device orion_ge11 = {
 
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq)
 {
 	fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
-		       mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+		       mapbase + 0x2000, SZ_16K - 1);
 	ge_complete(&orion_ge11_shared_data,
 		    orion_ge11_resources, irq, &orion_ge11_shared,
 		    NULL,
@@ -467,37 +470,15 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-static struct resource orion_switch_resources[] = {
-	{
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_switch_device = {
-	.name		= "dsa",
-	.id		= 0,
-	.num_resources	= 0,
-	.resource	= orion_switch_resources,
-};
-
-void __init orion_ge00_switch_init(struct dsa_platform_data *d, int irq)
+void __init orion_ge00_switch_init(struct dsa_platform_data *d)
 {
 	int i;
 
-	if (irq != NO_IRQ) {
-		orion_switch_resources[0].start = irq;
-		orion_switch_resources[0].end = irq;
-		orion_switch_device.num_resources = 1;
-	}
-
 	d->netdev = &orion_ge00.dev;
 	for (i = 0; i < d->nr_chips; i++)
 		d->chip[i].host_dev = &orion_ge_mvmdio.dev;
-	orion_switch_device.dev.platform_data = d;
 
-	platform_device_register(&orion_switch_device);
+	platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
 }
 
 /*****************************************************************************
@@ -538,7 +519,7 @@ void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long freq_m)
 {
 	orion_i2c_pdata.freq_m = freq_m;
-	fill_resources(&orion_i2c, orion_i2c_resources, mapbase,
+	fill_resources_irq(&orion_i2c, orion_i2c_resources, mapbase,
 		       SZ_32 - 1, irq);
 	platform_device_register(&orion_i2c);
 }
@@ -548,7 +529,7 @@ void __init orion_i2c_1_init(unsigned long mapbase,
 			     unsigned long freq_m)
 {
 	orion_i2c_1_pdata.freq_m = freq_m;
-	fill_resources(&orion_i2c_1, orion_i2c_1_resources, mapbase,
+	fill_resources_irq(&orion_i2c_1, orion_i2c_1_resources, mapbase,
 		       SZ_32 - 1, irq);
 	platform_device_register(&orion_i2c_1);
 }
@@ -576,14 +557,14 @@ static struct platform_device orion_spi_1 = {
 void __init orion_spi_init(unsigned long mapbase)
 {
 	fill_resources(&orion_spi, &orion_spi_resources,
-		       mapbase, SZ_512 - 1, NO_IRQ);
+		       mapbase, SZ_512 - 1);
 	platform_device_register(&orion_spi);
 }
 
 void __init orion_spi_1_init(unsigned long mapbase)
 {
 	fill_resources(&orion_spi_1, &orion_spi_1_resources,
-		       mapbase, SZ_512 - 1, NO_IRQ);
+		       mapbase, SZ_512 - 1);
 	platform_device_register(&orion_spi_1);
 }
 
@@ -741,7 +722,7 @@ void __init orion_ehci_init(unsigned long mapbase,
 			    enum orion_ehci_phy_ver phy_version)
 {
 	orion_ehci_data.phy_version = phy_version;
-	fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
+	fill_resources_irq(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
 		       irq);
 
 	platform_device_register(&orion_ehci);
@@ -765,7 +746,7 @@ static struct platform_device orion_ehci_1 = {
 void __init orion_ehci_1_init(unsigned long mapbase,
 			      unsigned long irq)
 {
-	fill_resources(&orion_ehci_1, orion_ehci_1_resources,
+	fill_resources_irq(&orion_ehci_1, orion_ehci_1_resources,
 		       mapbase, SZ_4K - 1, irq);
 
 	platform_device_register(&orion_ehci_1);
@@ -789,7 +770,7 @@ static struct platform_device orion_ehci_2 = {
 void __init orion_ehci_2_init(unsigned long mapbase,
 			      unsigned long irq)
 {
-	fill_resources(&orion_ehci_2, orion_ehci_2_resources,
+	fill_resources_irq(&orion_ehci_2, orion_ehci_2_resources,
 		       mapbase, SZ_4K - 1, irq);
 
 	platform_device_register(&orion_ehci_2);
@@ -819,7 +800,7 @@ void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
 			    unsigned long irq)
 {
 	orion_sata.dev.platform_data = sata_data;
-	fill_resources(&orion_sata, orion_sata_resources,
+	fill_resources_irq(&orion_sata, orion_sata_resources,
 		       mapbase, 0x5000 - 1, irq);
 
 	platform_device_register(&orion_sata);
@@ -849,7 +830,7 @@ void __init orion_crypto_init(unsigned long mapbase,
 			      unsigned long sram_size,
 			      unsigned long irq)
 {
-	fill_resources(&orion_crypto, orion_crypto_resources,
+	fill_resources_irq(&orion_crypto, orion_crypto_resources,
 		       mapbase, 0xffff, irq);
 	orion_crypto.num_resources = 3;
 	orion_crypto_resources[2].start = srambase;
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 9e6d76a..9347f3c 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -47,21 +47,17 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err,
 			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq);
 
 void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
-			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_platform_data *d,
-				   int irq);
+void __init orion_ge00_switch_init(struct dsa_platform_data *d);
 
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 557b134..2f06a2e 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -3,8 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
 
-obj-$(CONFIG_ARCH_PXA)		:= dma.o
-
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
deleted file mode 100644
index de2b061..0000000
--- a/arch/arm/plat-pxa/dma.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- *  linux/arch/arm/plat-pxa/dma.c
- *
- *  PXA DMA registration and IRQ dispatching
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 15, 2001
- *  Copyright:	MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/irq.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-#define DMA_DEBUG_NAME		"pxa_dma"
-#define DMA_MAX_REQUESTERS	64
-
-struct dma_channel {
-	char *name;
-	pxa_dma_prio prio;
-	void (*irq_handler)(int, void *);
-	void *data;
-	spinlock_t lock;
-};
-
-static struct dma_channel *dma_channels;
-static int num_dma_channels;
-
-/*
- * Debug fs
- */
-#ifdef CONFIG_DEBUG_FS
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
-#include <linux/seq_file.h>
-
-static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
-
-static int dbg_show_requester_chan(struct seq_file *s, void *p)
-{
-	int chan = (int)s->private;
-	int i;
-	u32 drcmr;
-
-	seq_printf(s, "DMA channel %d requesters list :\n", chan);
-	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
-		drcmr = DRCMR(i);
-		if ((drcmr & DRCMR_CHLNUM) == chan)
-			seq_printf(s, "\tRequester %d (MAPVLD=%d)\n",
-				   i, !!(drcmr & DRCMR_MAPVLD));
-	}
-
-	return 0;
-}
-
-static inline int dbg_burst_from_dcmd(u32 dcmd)
-{
-	int burst = (dcmd >> 16) & 0x3;
-
-	return burst ? 4 << burst : 0;
-}
-
-static int is_phys_valid(unsigned long addr)
-{
-	return pfn_valid(__phys_to_pfn(addr));
-}
-
-#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
-#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
-
-static int dbg_show_descriptors(struct seq_file *s, void *p)
-{
-	int chan = (int)s->private;
-	int i, max_show = 20, burst, width;
-	u32 dcmd;
-	unsigned long phys_desc;
-	struct pxa_dma_desc *desc;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma_channels[chan].lock, flags);
-	phys_desc = DDADR(chan);
-
-	seq_printf(s, "DMA channel %d descriptors :\n", chan);
-	seq_printf(s, "[%03d] First descriptor unknown\n", 0);
-	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
-		desc = phys_to_virt(phys_desc);
-		dcmd = desc->dcmd;
-		burst = dbg_burst_from_dcmd(dcmd);
-		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
-
-		seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
-			   i, phys_desc, desc);
-		seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
-		seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
-		seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
-		seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
-			   dcmd,
-			   DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
-			   DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
-			   DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
-			   DCMD_STR(ENDIAN), burst, width,
-			   dcmd & DCMD_LENGTH);
-		phys_desc = desc->ddadr;
-	}
-	if (i == max_show)
-		seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
-			   i, phys_desc);
-	else
-		seq_printf(s, "[%03d] Desc at %08lx is %s\n",
-			   i, phys_desc, phys_desc == DDADR_STOP ?
-			   "DDADR_STOP" : "invalid");
-
-	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
-
-	return 0;
-}
-
-static int dbg_show_chan_state(struct seq_file *s, void *p)
-{
-	int chan = (int)s->private;
-	u32 dcsr, dcmd;
-	int burst, width;
-	static char *str_prio[] = { "high", "normal", "low" };
-
-	dcsr = DCSR(chan);
-	dcmd = DCMD(chan);
-	burst = dbg_burst_from_dcmd(dcmd);
-	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
-
-	seq_printf(s, "DMA channel %d\n", chan);
-	seq_printf(s, "\tPriority : %s\n", str_prio[dma_channels[chan].prio]);
-	seq_printf(s, "\tUnaligned transfer bit: %s\n",
-		   DALGN & (1 << chan) ? "yes" : "no");
-	seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
-		   dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
-		   DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
-		   DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
-		   DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
-		   DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
-		   DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
-		   DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
-
-	seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
-		   dcmd,
-		   DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
-		   DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
-		   DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
-		   DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
-	seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
-	seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
-	seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
-
-	return 0;
-}
-
-static int dbg_show_state(struct seq_file *s, void *p)
-{
-	/* basic device status */
-	seq_puts(s, "DMA engine status\n");
-	seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
-
-	return 0;
-}
-
-#define DBGFS_FUNC_DECL(name) \
-static int dbg_open_##name(struct inode *inode, struct file *file) \
-{ \
-	return single_open(file, dbg_show_##name, inode->i_private); \
-} \
-static const struct file_operations dbg_fops_##name = { \
-	.owner		= THIS_MODULE, \
-	.open		= dbg_open_##name, \
-	.llseek		= seq_lseek, \
-	.read		= seq_read, \
-	.release	= single_release, \
-}
-
-DBGFS_FUNC_DECL(state);
-DBGFS_FUNC_DECL(chan_state);
-DBGFS_FUNC_DECL(descriptors);
-DBGFS_FUNC_DECL(requester_chan);
-
-static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
-{
-	char chan_name[11];
-	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
-	struct dentry *chan_reqs = NULL;
-	void *dt;
-
-	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
-	chan = debugfs_create_dir(chan_name, chandir);
-	dt = (void *)ch;
-
-	if (chan)
-		chan_state = debugfs_create_file("state", 0400, chan, dt,
-						 &dbg_fops_chan_state);
-	if (chan_state)
-		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
-						 &dbg_fops_descriptors);
-	if (chan_descr)
-		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
-						&dbg_fops_requester_chan);
-	if (!chan_reqs)
-		goto err_state;
-
-	return chan;
-
-err_state:
-	debugfs_remove_recursive(chan);
-	return NULL;
-}
-
-static void pxa_dma_init_debugfs(void)
-{
-	int i;
-	struct dentry *chandir;
-
-	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
-	if (IS_ERR(dbgfs_root) || !dbgfs_root)
-		goto err_root;
-
-	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
-					  &dbg_fops_state);
-	if (!dbgfs_state)
-		goto err_state;
-
-	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
-			     GFP_KERNEL);
-	if (!dbgfs_chan)
-		goto err_alloc;
-
-	chandir = debugfs_create_dir("channels", dbgfs_root);
-	if (!chandir)
-		goto err_chandir;
-
-	for (i = 0; i < num_dma_channels; i++) {
-		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
-		if (!dbgfs_chan[i])
-			goto err_chans;
-	}
-
-	return;
-err_chans:
-err_chandir:
-	kfree(dbgfs_chan);
-err_alloc:
-err_state:
-	debugfs_remove_recursive(dbgfs_root);
-err_root:
-	pr_err("pxa_dma: debugfs is not available\n");
-}
-
-static void __exit pxa_dma_cleanup_debugfs(void)
-{
-	debugfs_remove_recursive(dbgfs_root);
-}
-#else
-static inline void pxa_dma_init_debugfs(void) {}
-static inline void pxa_dma_cleanup_debugfs(void) {}
-#endif
-
-int pxa_request_dma (char *name, pxa_dma_prio prio,
-			void (*irq_handler)(int, void *),
-			void *data)
-{
-	unsigned long flags;
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name || !irq_handler)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	do {
-		/* try grabbing a DMA channel with the requested priority */
-		for (i = 0; i < num_dma_channels; i++) {
-			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name &&
-			    !pxad_toggle_reserved_channel(i)) {
-				found = 1;
-				break;
-			}
-		}
-		/* if requested prio group is full, try a hier priority */
-	} while (!found && prio--);
-
-	if (found) {
-		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].data = data;
-	} else {
-		printk (KERN_WARNING "No more available DMA channels for %s\n", name);
-		i = -ENODEV;
-	}
-
-	local_irq_restore(flags);
-	return i;
-}
-EXPORT_SYMBOL(pxa_request_dma);
-
-void pxa_free_dma (int dma_ch)
-{
-	unsigned long flags;
-
-	if (!dma_channels[dma_ch].name) {
-		printk (KERN_CRIT
-			"%s: trying to free channel %d which is already freed\n",
-			__func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-	dma_channels[dma_ch].name = NULL;
-	pxad_toggle_reserved_channel(dma_ch);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(pxa_free_dma);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, dint = DINT, done = 0;
-	struct dma_channel *channel;
-
-	while (dint) {
-		i = __ffs(dint);
-		dint &= (dint - 1);
-		channel = &dma_channels[i];
-		if (channel->name && channel->irq_handler) {
-			channel->irq_handler(i, channel->data);
-			done++;
-		}
-	}
-	if (done)
-		return IRQ_HANDLED;
-	else
-		return IRQ_NONE;
-}
-
-int __init pxa_init_dma(int irq, int num_ch)
-{
-	int i, ret;
-
-	dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
-	if (dma_channels == NULL)
-		return -ENOMEM;
-
-	/* dma channel priorities on pxa2xx processors:
-	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
-	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
-	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
-	 */
-	for (i = 0; i < num_ch; i++) {
-		DCSR(i) = 0;
-		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
-		spin_lock_init(&dma_channels[i].lock);
-	}
-
-	ret = request_irq(irq, dma_irq_handler, IRQF_SHARED, "DMA",
-			  dma_channels);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-	num_dma_channels = num_ch;
-
-	pxa_dma_init_debugfs();
-
-	return 0;
-}
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
deleted file mode 100644
index ceba3e4..0000000
--- a/arch/arm/plat-pxa/include/plat/dma.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef __PLAT_DMA_H
-#define __PLAT_DMA_H
-
-#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
-
-#define DCSR(n)		DMAC_REG((n) << 2)
-#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
-#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
-#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
-#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
-#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
-#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
-#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
-				 (((n) & 0x3f) << 2))
-
-#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
-#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
-#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
-#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
-#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
-#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
-#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
-
-#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
-#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
-#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
-#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
-
-#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
-#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
-
-#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
-#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
-
-#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
-#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
-#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
-#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
-#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
-#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
-#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
-#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
-#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
-#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-/*
- * Descriptor structure for PXA's DMA engine
- * Note: this structure must always be aligned to a 16-byte boundary.
- */
-
-typedef struct pxa_dma_desc {
-	volatile u32 ddadr;	/* Points to the next descriptor + flags */
-	volatile u32 dsadr;	/* DSADR value for the current transfer */
-	volatile u32 dtadr;	/* DTADR value for the current transfer */
-	volatile u32 dcmd;	/* DCMD value for the current transfer */
-} pxa_dma_desc;
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} pxa_dma_prio;
-
-/*
- * DMA registration
- */
-
-int __init pxa_init_dma(int irq, int num_ch);
-
-int pxa_request_dma (char *name,
-			 pxa_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void *data);
-
-void pxa_free_dma (int dma_ch);
-
-/*
- * Cooperation with pxa_dma + dmaengine while there remains at least one pxa
- * driver not converted to dmaengine.
- */
-#if defined(CONFIG_PXA_DMA)
-extern int pxad_toggle_reserved_channel(int legacy_channel);
-#else
-static inline int pxad_toggle_reserved_channel(int legacy_channel)
-{
-	return 0;
-}
-#endif
-
-extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
-
-#endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index b63aeeb..0fe2828 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -14,10 +14,6 @@
 #define __ASM_PLAT_MAP_S5P_H __FILE__
 
 #define S5P_VA_CHIPID		S3C_ADDR(0x02000000)
-#define S5P_VA_CMU		S3C_ADDR(0x02100000)
-
-#define S5P_VA_DMC0		S3C_ADDR(0x02440000)
-#define S5P_VA_DMC1		S3C_ADDR(0x02480000)
 
 #define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
 #define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 3d2cef6..f193414 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -170,9 +170,6 @@ static int xen_starting_cpu(unsigned int cpu)
 	pr_info("Xen: initializing cpu%d\n", cpu);
 	vcpup = per_cpu_ptr(xen_vcpu_info, cpu);
 
-	/* Direct vCPU id mapping for ARM guests. */
-	per_cpu(xen_vcpu_id, cpu) = cpu;
-
 	info.mfn = virt_to_gfn(vcpup);
 	info.offset = xen_offset_in_page(vcpup);
 
@@ -330,6 +327,7 @@ static int __init xen_guest_init(void)
 {
 	struct xen_add_to_physmap xatp;
 	struct shared_info *shared_info_page = NULL;
+	int cpu;
 
 	if (!xen_domain())
 		return 0;
@@ -380,7 +378,8 @@ static int __init xen_guest_init(void)
 		return -ENOMEM;
 
 	/* Direct vCPU id mapping for ARM guests. */
-	per_cpu(xen_vcpu_id, 0) = 0;
+	for_each_possible_cpu(cpu)
+		per_cpu(xen_vcpu_id, cpu) = cpu;
 
 	xen_auto_xlat_grant_frames.count = gnttab_max_grant_frames();
 	if (xen_xlate_map_ballooned_pages(&xen_auto_xlat_grant_frames.pfn,
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index bc3f00f..30398db 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -4,18 +4,19 @@ config ARM64
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
 	select ACPI_MCFG if ACPI
+	select ACPI_SPCR_TABLE if ACPI
+	select ARCH_CLOCKSOURCE_DATA
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_SG_CHAIN
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_NUMA_BALANCING
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
@@ -102,10 +103,8 @@ config ARM64
 	select NO_BOOTMEM
 	select OF
 	select OF_EARLY_FLATTREE
-	select OF_NUMA if NUMA && OF
 	select OF_RESERVED_MEM
 	select PCI_ECAM if ACPI
-	select PERF_USE_VMALLOC
 	select POWER_RESET
 	select POWER_SUPPLY
 	select SPARSE_IRQ
@@ -122,6 +121,9 @@ config ARCH_PHYS_ADDR_T_64BIT
 config MMU
 	def_bool y
 
+config DEBUG_RODATA
+	def_bool y
+
 config ARM64_PAGE_SHIFT
 	int
 	default 16 if ARM64_64K_PAGES
@@ -415,18 +417,13 @@ config ARM64_ERRATUM_845719
 
 config ARM64_ERRATUM_843419
 	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
-	depends on MODULES
 	default y
-	select ARM64_MODULE_CMODEL_LARGE
+	select ARM64_MODULE_CMODEL_LARGE if MODULES
 	help
-	  This option builds kernel modules using the large memory model in
-	  order to avoid the use of the ADRP instruction, which can cause
-	  a subsequent memory access to use an incorrect address on Cortex-A53
-	  parts up to r0p4.
-
-	  Note that the kernel itself must be linked with a version of ld
-	  which fixes potentially affected ADRP instructions through the
-	  use of veneers.
+	  This option links the kernel with '--fix-cortex-a53-843419' and
+	  builds modules using the large memory model in order to avoid the use
+	  of the ADRP instruction, which can cause a subsequent memory access
+	  to use an incorrect address on Cortex-A53 parts up to r0p4.
 
 	  If unsure, say Y.
 
@@ -582,7 +579,8 @@ config HOTPLUG_CPU
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
-	depends on SMP
+	select ACPI_NUMA if ACPI
+	select OF_NUMA
 	help
 	  Enable NUMA (Non Uniform Memory Access) support.
 
@@ -603,11 +601,18 @@ config USE_PERCPU_NUMA_NODE_ID
 	def_bool y
 	depends on NUMA
 
+config HAVE_SETUP_PER_CPU_AREA
+	def_bool y
+	depends on NUMA
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+	depends on NUMA
+
 source kernel/Kconfig.preempt
 source kernel/Kconfig.hz
 
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
-	depends on !HIBERNATION
 	def_bool y
 
 config ARCH_HAS_HOLES_MEMORYMODEL
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index 0cc758c..b661fe7 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -49,16 +49,6 @@ config DEBUG_SET_MODULE_RONX
 
 	  If in doubt, say Y.
 
-config DEBUG_RODATA
-	bool "Make kernel text and rodata read-only"
-	default y
-	help
-	  If this is set, kernel text and rodata will be made read-only. This
-	  is to help catch accidental or malicious attempts to change the
-	  kernel's executable code.
-
-	  If in doubt, say Y.
-
 config DEBUG_ALIGN_RODATA
 	depends on DEBUG_RODATA
 	bool "Align linker sections up to SECTION_SIZE"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index be5d824..cfbdf02 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -3,6 +3,8 @@ menu "Platform selection"
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select GENERIC_IRQ_CHIP
+	select PINCTRL
+	select PINCTRL_SUN50I_A64
 	help
 	  This enables support for Allwinner sunxi based SoCs like the A64.
 
@@ -15,8 +17,8 @@ config ARCH_ALPINE
 
 config ARCH_BCM2835
 	bool "Broadcom BCM2835 family"
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_OF
+	select GPIOLIB
 	select PINCTRL
 	select PINCTRL_BCM2835
 	select ARM_AMBA
@@ -29,19 +31,26 @@ config ARCH_BCM2835
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
 	select COMMON_CLK_IPROC
+	select GPIOLIB
 	select PINCTRL
-	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for Broadcom iProc based SoCs
 
 config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
-	select ARCH_REQUIRE_GPIOLIB
 	select DW_APB_ICTL
+	select GPIOLIB
 	select PINCTRL
 	help
 	  This enables support for Marvell Berlin SoC Family
 
+config ARCH_BRCMSTB
+	bool "Broadcom Set-Top-Box SoCs"
+	select BRCMSTB_L2_IRQ
+	select GENERIC_IRQ_CHIP
+	help
+	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
+
 config ARCH_EXYNOS
 	bool "ARMv8 based Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
@@ -55,6 +64,7 @@ config ARCH_EXYNOS
 
 config ARCH_LAYERSCAPE
 	bool "ARMv8 based Freescale Layerscape SoC family"
+	select EDAC_SUPPORT
 	help
 	  This enables support for the Freescale Layerscape SoC family.
 
@@ -67,6 +77,7 @@ config ARCH_HISI
 	bool "Hisilicon SoC Family"
 	select ARM_TIMER_SP804
 	select HISILICON_IRQ_MBIGEN if PCI
+	select PINCTRL
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
@@ -93,6 +104,7 @@ config ARCH_MVEBU
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
 	select MVEBU_ODMI
+	select MVEBU_PIC
 	help
 	  This enables support for Marvell EBU familly, including:
 	   - Armada 3700 SoC Family
@@ -108,7 +120,7 @@ config ARCH_QCOM
 config ARCH_ROCKCHIP
 	bool "Rockchip Platforms"
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ROCKCHIP_TIMER
@@ -154,13 +166,14 @@ config ARCH_STRATIX10
 config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
-	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
+	select GPIOLIB
 	select PINCTRL
+	select PM
+	select PM_GENERIC_DOMAINS
 	select RESET_CONTROLLER
 	help
 	  This enables support for the NVIDIA Tegra SoC family.
@@ -183,8 +196,8 @@ config ARCH_UNIPHIER
 
 config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
-	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_VERSATILE
+	select GPIOLIB
 	select PM
 	select PM_GENERIC_DOMAINS
 	select POWER_RESET_VEXPRESS
@@ -204,6 +217,11 @@ config ARCH_XGENE
 	help
 	  This enables support for AppliedMicro X-Gene SOC Family
 
+config ARCH_ZX
+	bool "ZTE ZX SoC Family"
+	help
+	  This enables support for ZTE ZX SoC Family
+
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP Family"
 	help
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 5b54f8c..ab51aed 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -18,6 +18,14 @@ ifneq ($(CONFIG_RELOCATABLE),)
 LDFLAGS_vmlinux		+= -pie -Bsymbolic
 endif
 
+ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
+  ifeq ($(call ld-option, --fix-cortex-a53-843419),)
+$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum)
+  else
+LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
+  endif
+endif
+
 KBUILD_DEFCONFIG := defconfig
 
 # Check for binutils support for specific extensions
@@ -38,10 +46,12 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 AS		+= -EB
 LD		+= -EB
+UTS_MACHINE	:= aarch64_be
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
 AS		+= -EL
 LD		+= -EL
+UTS_MACHINE	:= aarch64
 endif
 
 CHECKFLAGS	+= -D__aarch64__
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 6e199c9..6684f97 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -19,6 +19,7 @@ dts-dirs += socionext
 dts-dirs += sprd
 dts-dirs += xilinx
 dts-dirs += lg
+dts-dirs += zte
 
 subdir-y	:= $(dts-dirs)
 
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 445aa67..c2b9bcb 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -255,10 +255,10 @@
 		/* Local timer */
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xf01>,
-				     <1 14 0xf01>,
-				     <1 11 0xf01>,
-				     <1 10 0xf01>;
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
 		};
 
 		timer0: timer0@ffc03000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 90a84c5..e6e3491 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -87,3 +87,14 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 6297907..03e3d76 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -50,3 +50,9 @@
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
 };
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index f4f30f6..06a34dc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -57,6 +57,19 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -72,3 +85,25 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 54bb7c7..73f1593 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -52,6 +52,19 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	usb_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 };
 
 &uart_AO {
@@ -60,3 +73,32 @@
 	pinctrl-names = "default";
 
 };
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index e502c24..610e0e1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -45,6 +45,9 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
@@ -99,16 +102,40 @@
 		method = "smc";
 	};
 
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	xtal: xtal-clk {
@@ -124,6 +151,25 @@
 		#size-cells = <2>;
 		ranges;
 
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
 		cbus: cbus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc1100000 0x0 0x100000>;
@@ -153,6 +199,27 @@
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x8700 0x0 0x14>;
@@ -160,6 +227,51 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_SPI>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@c4301000 {
@@ -203,6 +315,56 @@
 						function = "uart_ao";
 					};
 				};
+
+				remote_input_ao_pins: remote_input_ao {
+					mux {
+						groups = "remote_input_ao";
+						function = "remote_input_ao";
+					};
+				};
+
+				i2c_ao_pins: i2c_ao {
+					mux {
+						groups = "i2c_sck_ao",
+						       "i2c_sda_ao";
+						function = "i2c_ao";
+					};
+				};
+
+				pwm_ao_a_3_pins: pwm_ao_a_3 {
+					mux {
+						groups = "pwm_ao_a_3";
+						function = "pwm_ao_a_3";
+					};
+				};
+
+				pwm_ao_a_6_pins: pwm_ao_a_6 {
+					mux {
+						groups = "pwm_ao_a_6";
+						function = "pwm_ao_a_6";
+					};
+				};
+
+				pwm_ao_a_12_pins: pwm_ao_a_12 {
+					mux {
+						groups = "pwm_ao_a_12";
+						function = "pwm_ao_a_12";
+					};
+				};
+
+				pwm_ao_b_pins: pwm_ao_b {
+					mux {
+						groups = "pwm_ao_b";
+						function = "pwm_ao_b";
+					};
+				};
+			};
+
+			clkc_AO: clock-controller@040 {
+				compatible = "amlogic,gxbb-aoclkc";
+				reg = <0x0 0x00040 0x0 0x4>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
 			};
 
 			uart_AO: serial@4c0 {
@@ -212,6 +374,30 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			pwm_ab_AO: pwm@550 {
+				compatible = "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x0550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_AO_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		periphs: periphs@c8834000 {
@@ -251,6 +437,16 @@
 					};
 				};
 
+				nor_pins: nor {
+					mux {
+						groups = "nor_d",
+						       "nor_q",
+						       "nor_c",
+						       "nor_cs";
+						function = "nor";
+					};
+				};
+
 				sdcard_pins: sdcard {
 					mux {
 						groups = "sdcard_d0",
@@ -263,6 +459,25 @@
 					};
 				};
 
+				sdio_pins: sdio {
+					mux {
+						groups = "sdio_d0",
+						       "sdio_d1",
+						       "sdio_d2",
+						       "sdio_d3",
+						       "sdio_cmd",
+						       "sdio_clk";
+						function = "sdio";
+					};
+				};
+
+				sdio_irq_pins: sdio_irq {
+					mux {
+						groups = "sdio_irq";
+						function = "sdio";
+					};
+				};
+
 				uart_a_pins: uart_a {
 					mux {
 						groups = "uart_tx_a",
@@ -287,6 +502,30 @@
 					};
 				};
 
+				i2c_a_pins: i2c_a {
+					mux {
+						groups = "i2c_sck_a",
+						       "i2c_sda_a";
+						function = "i2c_a";
+					};
+				};
+
+				i2c_b_pins: i2c_b {
+					mux {
+						groups = "i2c_sck_b",
+						       "i2c_sda_b";
+						function = "i2c_b";
+					};
+				};
+
+				i2c_c_pins: i2c_c {
+					mux {
+						groups = "i2c_sck_c",
+						       "i2c_sda_c";
+						function = "i2c_c";
+					};
+				};
+
 				eth_pins: eth_c {
 					mux {
 						groups = "eth_mdio",
@@ -306,6 +545,55 @@
 						function = "eth";
 					};
 				};
+
+				pwm_a_x_pins: pwm_a_x {
+					mux {
+						groups = "pwm_a_x";
+						function = "pwm_a_x";
+					};
+				};
+
+				pwm_a_y_pins: pwm_a_y {
+					mux {
+						groups = "pwm_a_y";
+						function = "pwm_a_y";
+					};
+				};
+
+				pwm_b_pins: pwm_b {
+					mux {
+						groups = "pwm_b";
+						function = "pwm_b";
+					};
+				};
+
+				pwm_d_pins: pwm_d {
+					mux {
+						groups = "pwm_d";
+						function = "pwm_d";
+					};
+				};
+
+				pwm_e_pins: pwm_e {
+					mux {
+						groups = "pwm_e";
+						function = "pwm_e";
+					};
+				};
+
+				pwm_f_x_pins: pwm_f_x {
+					mux {
+						groups = "pwm_f_x";
+						function = "pwm_f_x";
+					};
+				};
+
+				pwm_f_y_pins: pwm_f_y {
+					mux {
+						groups = "pwm_f_y";
+						function = "pwm_f_y";
+					};
+				};
 			};
 		};
 
@@ -321,6 +609,15 @@
 				#clock-cells = <1>;
 				reg = <0x0 0x0 0x0 0x3db>;
 			};
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
 		};
 
 		apb: apb@d0000000 {
@@ -331,14 +628,40 @@
 			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 		};
 
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
 		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
 			reg = <0x0 0xc9410000 0x0 0x10000
 			       0x0 0xc8834540 0x0 0x4>;
 			interrupts = <0 8 1>;
 			interrupt-names = "macirq";
-			clocks = <&xtal>;
-			clock-names = "stmmaceth";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1";
 			phy-mode = "rgmii";
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index b7fb5d9..32a961c 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -74,6 +74,7 @@
 
 &xgenet {
 	status = "ok";
+	rxlos-gpios = <&sbgpio 12 1>;
 };
 
 &mmc0 {
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 1425ed4..72720e9 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -26,6 +26,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
 		};
 		cpu@001 {
 			device_type = "cpu";
@@ -34,6 +36,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
 			device_type = "cpu";
@@ -42,6 +46,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
 			device_type = "cpu";
@@ -50,6 +56,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
 			device_type = "cpu";
@@ -58,6 +66,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
 			device_type = "cpu";
@@ -66,6 +76,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
 			device_type = "cpu";
@@ -74,6 +86,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
 			device_type = "cpu";
@@ -82,6 +96,8 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
 			compatible = "cache";
@@ -223,6 +239,46 @@
 				clock-output-names = "refclk";
 			};
 
+			pmdpll: pmdpll@170000f0 {
+				compatible = "apm,xgene-pcppll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x170000f0 0x0 0x10>;
+				clock-output-names = "pmdpll";
+			};
+
+			pmd0clk: pmd0clk@7e200200 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200200 0x0 0x10>;
+				clock-output-names = "pmd0clk";
+			};
+
+			pmd1clk: pmd1clk@7e200210 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200210 0x0 0x10>;
+				clock-output-names = "pmd1clk";
+			};
+
+			pmd2clk: pmd2clk@7e200220 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200220 0x0 0x10>;
+				clock-output-names = "pmd2clk";
+			};
+
+			pmd3clk: pmd3clk@7e200230 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200230 0x0 0x10>;
+				clock-output-names = "pmd3clk";
+			};
+
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
@@ -453,6 +509,64 @@
 			};
 		};
 
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
 		mailbox: mailbox@10540000 {
 			compatible = "apm,xgene-slimpro-mbox";
 			reg = <0x0 0x10540000 0x0 0x8000>;
@@ -472,6 +586,11 @@
 			mboxes = <&mailbox 0>;
 		};
 
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
 		serial0: serial@10600000 {
 			device_type = "serial";
 			compatible = "ns16550";
@@ -508,10 +627,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x4>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
 			msi-parent = <&v2m0>;
@@ -533,10 +652,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x4>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
 			msi-parent = <&v2m0>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index f1c2c71..63be8e5 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -110,10 +110,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 0 0xff01>,	/* Secure Phys IRQ */
-			     <1 13 0xff01>,	/* Non-secure Phys IRQ */
-			     <1 14 0xff01>,	/* Virt IRQ */
-			     <1 15 0xff01>;	/* Hyp IRQ */
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
 		clock-frequency = <50000000>;
 	};
 
@@ -553,6 +553,64 @@
 			};
 		};
 
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
@@ -569,10 +627,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x4>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
 			msi-parent = <&msi>;
@@ -594,10 +652,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x4>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
 			msi-parent = <&msi>;
@@ -619,10 +677,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x4>;
 			dma-coherent;
 			clocks = <&pcie2clk 0>;
 			msi-parent = <&msi>;
@@ -644,10 +702,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x4>;
 			dma-coherent;
 			clocks = <&pcie3clk 0>;
 			msi-parent = <&msi>;
@@ -669,10 +727,10 @@
 			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
 				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
-					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
-					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
-					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x4>;
 			dma-coherent;
 			clocks = <&pcie4clk 0>;
 			msi-parent = <&msi>;
@@ -697,6 +755,11 @@
 			mboxes = <&mailbox 0>;
 		};
 
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
 		serial0: serial@1c020000 {
 			status = "disabled";
 			device_type = "serial";
@@ -923,7 +986,7 @@
 			/* mac address will be overwritten by the bootloader */
 			local-mac-address = [00 00 00 00 00 00];
 			phy-connection-type = "rgmii";
-			phy-handle = <&menet0phy>,<&menetphy>;
+			phy-handle = <&menetphy>,<&menet0phy>;
 			mdio {
 				compatible = "apm,xgene-mdio";
 				#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 120000
index 0000000..3937b77
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm2835-rpi.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 6f47dd2..7841b72 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -1,7 +1,7 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
-#include "../../../../arm/boot/dts/bcm2835-rpi.dtsi"
-#include "../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
index f2a31d0..8216bbb 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2837.dtsi
@@ -1,4 +1,4 @@
-#include "../../../../arm/boot/dts/bcm283x.dtsi"
+#include "bcm283x.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
new file mode 120000
index 0000000..dca7c05
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/bcm283x.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
new file mode 120000
index 0000000..5f54e4c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm283x.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/bcm283x.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index f53b095..d95dc40 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -88,13 +88,13 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>,
+			      IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
-			      IRQ_TYPE_EDGE_RISING)>;
+			      IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {
@@ -299,6 +299,14 @@
 			};
 		};
 
+		pwm: pwm@66010000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x66010000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		mdio_mux_iproc: mdio-mux@6602023c {
 			compatible = "brcm,mdio-mux-iproc";
 			reg = <0x6602023c 0x14>;
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index 2eb9b22..04dc8a8 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -354,10 +354,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xff01>,
-		             <1 14 0xff01>,
-		             <1 11 0xff01>,
-		             <1 10 0xff01>;
+		interrupts = <1 13 4>,
+		             <1 14 4>,
+		             <1 11 4>,
+		             <1 10 4>;
 	};
 
 	pmu {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index ca663df..6328a66 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/clock/exynos7-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos7";
@@ -473,10 +474,14 @@
 
 		timer {
 			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xff01>,
-				     <1 14 0xff01>,
-				     <1 11 0xff01>,
-				     <1 10 0xff01>;
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		pmu_system_controller: system-controller@105c0000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 9d3e9fe..dd9e919 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -56,12 +56,14 @@
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
-		serial0 = &lpuart0;
-		serial1 = &lpuart1;
-		serial2 = &lpuart2;
-		serial3 = &lpuart3;
-		serial4 = &lpuart4;
-		serial5 = &lpuart5;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 4084631..d2313e0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -52,6 +52,14 @@
 
 	aliases {
 		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e669fbd..58635f7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -119,10 +119,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x1>, /* Physical Secure PPI */
-			     <1 14 0x1>, /* Physical Non-Secure PPI */
-			     <1 11 0x1>, /* Virtual PPI */
-			     <1 10 0x1>; /* Hypervisor PPI */
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
 	};
 
 	pmu {
@@ -247,6 +247,13 @@
 			bus-width = <4>;
 		};
 
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <0 144 0x4>;
+			big-endian;
+		};
+
 		dspi0: dspi@2100000 {
 			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index e8801fa..b0dd010 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -57,6 +57,9 @@
 		serial1 = &serial1;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index e127f0b..ad0ebb8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -56,6 +56,10 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
 };
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 21023a3..d105976 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -191,10 +191,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
-			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 0x8>, /* Virtual PPI, active-low */
-			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
 	};
 
 	pmu {
@@ -588,6 +588,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -612,6 +613,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -636,6 +638,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -660,6 +663,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
+			dma-coherent;
 			num-lanes = <4>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -715,4 +719,18 @@
 			interrupts = <0 12 4>;
 		};
 	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <0 17 0x4>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <0 18 0x4>;
+		little-endian;
+	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 593c7e4..dba3c13 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -29,16 +29,56 @@
 	 * Reserve below regions from memory node:
 	 *
 	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  0x05f0,1000 - 0x05f0,1fff: Reboot reason
 	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
 	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer
 	 *  0x3e00,0000 - 0x3fff,ffff: OP-TEE
 	 */
 	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
-		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00001000>,
+		      <0x00000000 0x05f02000 0x00000000 0x00efd000>,
 		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
-		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
+		      <0x00000000 0x07410000 0x00000000 0x1aaf0000>,
+		      <0x00000000 0x22000000 0x00000000 0x1c000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@0x21f00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x21f00000 0x0 0x00100000>;
+			record-size	= <0x00020000>;
+			console-size	= <0x00020000>;
+			ftrace-size	= <0x00020000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00000000 0x08000000>;
+			linux,cma-default;
+		};
+	};
+
+	reboot-mode-syscon@5f01000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x05f01000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal	= <0x77665501>;
+			mode-bootloader	= <0x77665500>;
+			mode-recovery	= <0x77665502>;
+		};
 	};
 
 	soc {
@@ -55,6 +95,8 @@
 		};
 
 		uart1: uart@f7111000 {
+			assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+			assigned-clock-rates = <150000000>;
 			status = "ok";
 		};
 
@@ -372,3 +414,43 @@
 &uart3 {
 	label = "LS-UART1";
 };
+
+&ade {
+	status = "ok";
+};
+
+&dsi {
+	status = "ok";
+
+	ports {
+		/* 1 for output port */
+		port@1 {
+			reg = <1>;
+
+			dsi_out0: endpoint@0 {
+				remote-endpoint = <&adv7533_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "ok";
+
+	adv7533: adv7533@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 2>;
+		pd-gpio = <&gpio0 4 0>;
+		adi,dsi-lanes = <4>;
+
+		port {
+			adv7533_in: endpoint {
+				remote-endpoint = <&dsi_out0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 4f27041..17839db 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -262,6 +262,11 @@
 			#clock-cells = <1>;
 		};
 
+		medianoc_ade: medianoc_ade@f4520000 {
+			compatible = "syscon";
+			reg = <0x0 0xf4520000 0x0 0x4000>;
+		};
+
 		stub_clock: stub_clock {
 			compatible = "hisilicon,hi6220-stub-clk";
 			hisilicon,hi6220-clk-sram = <&sram>;
@@ -766,6 +771,7 @@
 			interrupts = <0x0 0x48 0x4>;
 			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
 			bus-width = <0x8>;
 			vmmc-supply = <&ldo19>;
 			pinctrl-names = "default";
@@ -779,12 +785,16 @@
 			card-detect-delay = <200>;
 			hisilicon,peripheral-syscon = <&ao_ctrl>;
 			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
 			reg = <0x0 0xf723e000 0x0 0x1000>;
 			interrupts = <0x0 0x49 0x4>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
 			vqmmc-supply = <&ldo7>;
 			vmmc-supply = <&ldo10>;
 			bus-width = <0x4>;
@@ -802,6 +812,7 @@
 			interrupts = <0x0 0x4a 0x4>;
 			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
 			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
 			bus-width = <0x4>;
 			broken-cd;
 			pinctrl-names = "default", "idle";
@@ -850,5 +861,55 @@
 				};
 			};
 		};
+
+		ade: ade@f4100000 {
+			compatible = "hisilicon,hi6220-ade";
+			reg = <0x0 0xf4100000 0x0 0x7800>;
+			reg-names = "ade_base";
+			hisilicon,noc-syscon = <&medianoc_ade>;
+			resets = <&media_ctrl MEDIA_ADE>;
+			interrupts = <0 115 4>; /* ldi interrupt */
+
+			clocks = <&media_ctrl HI6220_ADE_CORE>,
+				 <&media_ctrl HI6220_CODEC_JPEG>,
+				 <&media_ctrl HI6220_ADE_PIX_SRC>;
+			/*clock name*/
+			clock-names  = "clk_ade_core",
+				       "clk_codec_jpeg",
+				       "clk_ade_pix";
+
+			assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+				<&media_ctrl HI6220_CODEC_JPEG>;
+			assigned-clock-rates = <360000000>, <288000000>;
+			dma-coherent;
+			status = "disabled";
+
+			port {
+				ade_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+		dsi: dsi@f4107800 {
+			compatible = "hisilicon,hi6220-dsi";
+			reg = <0x0 0xf4107800 0x0 0x100>;
+			clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+			clock-names = "pclk";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 0 for input port */
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ade_out>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
index bf322ed..4b472a3 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -300,11 +300,6 @@
 			clock-frequency = <200000000>;
 		};
 
-		peri_c_subctrl: syscon@80000000 {
-			compatible = "hisilicon,hip05-perisubc", "syscon";
-			reg = < 0x0 0x80000000 0x0 0x10000>;
-		};
-
 		uart0: uart@80300000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x80300000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
deleted file mode 100644
index b6a130c..0000000
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ /dev/null
@@ -1,180 +0,0 @@
-soc0: soc@000000000 {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	device_type = "soc";
-	compatible = "simple-bus";
-	ranges = <0x0 0x0 0x0 0x0 0x1 0x0>;
-	chip-id = <0>;
-
-	soc0_mdio0: mdio@803c0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "hisilicon,hns-mdio";
-		reg = <0x0 0x803c0000 0x0 0x10000>;
-		subctrl-vbase = <&peri_c_subctrl>;
-
-		soc0_phy0: ethernet-phy@0 {
-			reg = <0x0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-		soc0_phy1: ethernet-phy@1 {
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-
-	dsaf0: dsa@c7000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "hisilicon,hns-dsaf-v1";
-		mode = "6port-16rss";
-		interrupt-parent = <&mbigen_dsa>;
-
-		reg = <0x0 0xc5000000 0x0 0x890000
-		       0x0 0xc7000000 0x0 0x60000
-		       >;
-
-		reg-names = "ppe-base","dsaf-base";
-		subctrl-syscon = <&dsaf_subctrl>;
-		reset-field-offset = <0>;
-		interrupts = <
-			/* [14] ge fifo err 8 / xge 6**/
-			149 0x4 150 0x4 151 0x4 152 0x4
-			153 0x4 154 0x4  26 0x4 27 0x4
-			155 0x4 156 0x4 157 0x4 158 0x4 159 0x4 160 0x4
-			/* [12] rcb com 4*3**/
-			0x6 0x4 0x7 0x4 0x8 0x4 0x9 0x4
-			 16 0x4  17 0x4  18 0x4  19 0x4
-			 22 0x4  23 0x4  24 0x4  25 0x4
-			/* [8] ppe tnl 0-7***/
-			0x0 0x4 0x1 0x4 0x2 0x4 0x3 0x4
-			0x4 0x4 0x5 0x4 12 0x4 13 0x4
-			/* [21] dsaf event int 3+18**/
-			 128 0x4  129 0x4  130 0x4
-			0x83 0x4 0x84 0x4 0x85 0x4 0x86 0x4 0x87 0x4 0x88 0x4
-			0x89 0x4 0x8a 0x4 0x8b 0x4 0x8c 0x4 0x8d 0x4 0x8e 0x4
-			0x8f 0x4 0x90 0x4 0x91 0x4 0x92 0x4 0x93 0x4 0x94 0x4
-			/* [4] debug rcb 2*2*/
-			0xe 0x1 0xf 0x1 0x14 0x1 0x15 0x1
-			/* [256] sevice rcb 2*128*/
-			0x180 0x1 0x181 0x1 0x182 0x1 0x183 0x1
-			0x184 0x1 0x185 0x1 0x186 0x1 0x187 0x1
-			0x188 0x1 0x189 0x1 0x18a 0x1 0x18b 0x1
-			0x18c 0x1 0x18d 0x1 0x18e 0x1 0x18f 0x1
-			0x190 0x1 0x191 0x1 0x192 0x1 0x193 0x1
-			0x194 0x1 0x195 0x1 0x196 0x1 0x197 0x1
-			0x198 0x1 0x199 0x1 0x19a 0x1 0x19b 0x1
-			0x19c 0x1 0x19d 0x1 0x19e 0x1 0x19f 0x1
-			0x1a0 0x1 0x1a1 0x1 0x1a2 0x1 0x1a3 0x1
-			0x1a4 0x1 0x1a5 0x1 0x1a6 0x1 0x1a7 0x1
-			0x1a8 0x1 0x1a9 0x1 0x1aa 0x1 0x1ab 0x1
-			0x1ac 0x1 0x1ad 0x1 0x1ae 0x1 0x1af 0x1
-			0x1b0 0x1 0x1b1 0x1 0x1b2 0x1 0x1b3 0x1
-			0x1b4 0x1 0x1b5 0x1 0x1b6 0x1 0x1b7 0x1
-			0x1b8 0x1 0x1b9 0x1 0x1ba 0x1 0x1bb 0x1
-			0x1bc 0x1 0x1bd 0x1 0x1be 0x1 0x1bf 0x1
-			0x1c0 0x1 0x1c1 0x1 0x1c2 0x1 0x1c3 0x1
-			0x1c4 0x1 0x1c5 0x1 0x1c6 0x1 0x1c7 0x1
-			0x1c8 0x1 0x1c9 0x1 0x1ca 0x1 0x1cb 0x1
-			0x1cc 0x1 0x1cd 0x1 0x1ce 0x1 0x1cf 0x1
-			0x1d0 0x1 0x1d1 0x1 0x1d2 0x1 0x1d3 0x1
-			0x1d4 0x1 0x1d5 0x1 0x1d6 0x1 0x1d7 0x1
-			0x1d8 0x1 0x1d9 0x1 0x1da 0x1 0x1db 0x1
-			0x1dc 0x1 0x1dd 0x1 0x1de 0x1 0x1df 0x1
-			0x1e0 0x1 0x1e1 0x1 0x1e2 0x1 0x1e3 0x1
-			0x1e4 0x1 0x1e5 0x1 0x1e6 0x1 0x1e7 0x1
-			0x1e8 0x1 0x1e9 0x1 0x1ea 0x1 0x1eb 0x1
-			0x1ec 0x1 0x1ed 0x1 0x1ee 0x1 0x1ef 0x1
-			0x1f0 0x1 0x1f1 0x1 0x1f2 0x1 0x1f3 0x1
-			0x1f4 0x1 0x1f5 0x1 0x1f6 0x1 0x1f7 0x1
-			0x1f8 0x1 0x1f9 0x1 0x1fa 0x1 0x1fb 0x1
-			0x1fc 0x1 0x1fd 0x1 0x1fe 0x1 0x1ff 0x1
-			0x200 0x1 0x201 0x1 0x202 0x1 0x203 0x1
-			0x204 0x1 0x205 0x1 0x206 0x1 0x207 0x1
-			0x208 0x1 0x209 0x1 0x20a 0x1 0x20b 0x1
-			0x20c 0x1 0x20d 0x1 0x20e 0x1 0x20f 0x1
-			0x210 0x1 0x211 0x1 0x212 0x1 0x213 0x1
-			0x214 0x1 0x215 0x1 0x216 0x1 0x217 0x1
-			0x218 0x1 0x219 0x1 0x21a 0x1 0x21b 0x1
-			0x21c 0x1 0x21d 0x1 0x21e 0x1 0x21f 0x1
-			0x220 0x1 0x221 0x1 0x222 0x1 0x223 0x1
-			0x224 0x1 0x225 0x1 0x226 0x1 0x227 0x1
-			0x228 0x1 0x229 0x1 0x22a 0x1 0x22b 0x1
-			0x22c 0x1 0x22d 0x1 0x22e 0x1 0x22f 0x1
-			0x230 0x1 0x231 0x1 0x232 0x1 0x233 0x1
-			0x234 0x1 0x235 0x1 0x236 0x1 0x237 0x1
-			0x238 0x1 0x239 0x1 0x23a 0x1 0x23b 0x1
-			0x23c 0x1 0x23d 0x1 0x23e 0x1 0x23f 0x1
-			0x240 0x1 0x241 0x1 0x242 0x1 0x243 0x1
-			0x244 0x1 0x245 0x1 0x246 0x1 0x247 0x1
-			0x248 0x1 0x249 0x1 0x24a 0x1 0x24b 0x1
-			0x24c 0x1 0x24d 0x1 0x24e 0x1 0x24f 0x1
-			0x250 0x1 0x251 0x1 0x252 0x1 0x253 0x1
-			0x254 0x1 0x255 0x1 0x256 0x1 0x257 0x1
-			0x258 0x1 0x259 0x1 0x25a 0x1 0x25b 0x1
-			0x25c 0x1 0x25d 0x1 0x25e 0x1 0x25f 0x1
-			0x260 0x1 0x261 0x1 0x262 0x1 0x263 0x1
-			0x264 0x1 0x265 0x1 0x266 0x1 0x267 0x1
-			0x268 0x1 0x269 0x1 0x26a 0x1 0x26b 0x1
-			0x26c 0x1 0x26d 0x1 0x26e 0x1 0x26f 0x1
-			0x270 0x1 0x271 0x1 0x272 0x1 0x273 0x1
-			0x274 0x1 0x275 0x1 0x276 0x1 0x277 0x1
-			0x278 0x1 0x279 0x1 0x27a 0x1 0x27b 0x1
-			0x27c 0x1 0x27d 0x1 0x27e 0x1 0x27f 0x1>;
-		buf-size = <4096>;
-		desc-num = <1024>;
-		dma-coherent;
-
-		port@0 {
-			reg = <0>;
-			serdes-syscon = <&serdes_ctrl0>;
-		};
-		port@1 {
-			reg = <1>;
-			serdes-syscon = <&serdes_ctrl0>;
-		};
-		port@4 {
-			reg = <4>;
-			phy-handle = <&soc0_phy0>;
-			serdes-syscon = <&serdes_ctrl1>;
-		};
-		port@5 {
-			reg = <5>;
-			phy-handle = <&soc0_phy1>;
-			serdes-syscon = <&serdes_ctrl1>;
-		};
-	};
-
-	eth0: ethernet@0{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <0>;
-		local-mac-address = [00 00 00 01 00 58];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth1: ethernet@1{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <1>;
-		local-mac-address = [00 00 00 01 00 59];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth2: ethernet@4{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <4>;
-		local-mac-address = [00 00 00 01 00 5a];
-		status = "disabled";
-		dma-coherent;
-	};
-	eth3: ethernet@5{
-		compatible = "hisilicon,hns-nic-v1";
-		ae-handle = <&dsaf0>;
-		port-idx-in-ae = <5>;
-		local-mac-address = [00 00 00 01 00 5b];
-		status = "disabled";
-		dma-coherent;
-	};
-};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index f3e5323..f54b283 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -25,6 +25,34 @@
 	chosen { };
 };
 
+&eth0 {
+	status = "ok";
+};
+
+&eth1 {
+	status = "ok";
+};
+
+&eth2 {
+	status = "ok";
+};
+
+&eth3 {
+	status = "ok";
+};
+
+&sas0 {
+	status = "ok";
+};
+
+&sas1 {
+	status = "ok";
+};
+
+&sas2 {
+	status = "ok";
+};
+
 &usb_ohci {
 	status = "ok";
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
index 5927bc4..b548763 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -277,6 +277,39 @@
 			#interrupt-cells = <2>;
 			num-pins = <2>;
 		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&its_dsa 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&its_dsa 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+	};
+
+	mbigen_dsa@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&its_dsa 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&its_dsa 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
 	};
 
 	soc {
@@ -302,6 +335,338 @@
 			dma-coherent;
 			status = "disabled";
 		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000
+			       0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon= <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet@4{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet@5{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet@0{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet@1{
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <75 4>,<76 4>,<77 4>,<78 4>,<79 4>,
+				     <80 4>,<81 4>,<82 4>,<83 4>,<84 4>,
+				     <85 4>,<86 4>,<87 4>,<88 4>,<89 4>,
+				     <90 4>,<91 4>,<92 4>,<93 4>,<94 4>,
+				     <95 4>,<96 4>,<97 4>,<98 4>,<99 4>,
+				     <100 4>,<101 4>,<102 4>,<103 4>,<104 4>,
+				     <105 4>,<106 4>,<107 4>,<108 4>,<109 4>,
+				     <110 4>,<111 4>,<112 4>,<113 4>,<114 4>,
+				     <115 4>,<116 4>,<117 4>,<118 4>,<119 4>,
+				     <120 4>,<121 4>,<122 4>,<123 4>,<124 4>,
+				     <125 4>,<126 4>,<127 4>,<128 4>,<129 4>,
+				     <130 4>,<131 4>,<132 4>,<133 4>,<134 4>,
+				     <135 4>,<136 4>,<137 4>,<138 4>,<139 4>,
+				     <140 4>,<141 4>,<142 4>,<143 4>,<144 4>,
+				     <145 4>,<146 4>,<147 4>,<148 4>,<149 4>,
+				     <150 4>,<151 4>,<152 4>,<153 4>,<154 4>,
+				     <155 4>,<156 4>,<157 4>,<158 4>,<159 4>,
+				     <160 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			am-max-trans;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			queue-count = <16>;
+			phy-count = <9>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
+			status = "disabled";
+		};
 	};
 
 };
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 308468d..cf39531 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
 # Mvebu SoC Family
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 3753c1c..048e5cf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-dual.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8020";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
new file mode 100644
index 0000000..6e6f182
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+
+/* CON5 on CP0 expansion */
+&cpm_pcie2 {
+	status = "okay";
+};
+
+&cpm_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP0 expansion */
+&cpm_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cpm_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cpm_usb3_1 {
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cps_pcie2 {
+	status = "okay";
+};
+
+&cps_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON4 on CP1 expansion */
+&cps_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cps_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cps_usb3_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 8bd0d8f..9c1b28c 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -47,6 +47,7 @@
 
 #include "armada-ap806-quad.dtsi"
 #include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
 
 / {
 	model = "Marvell Armada 8040";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index eab1a42..7b61361 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -122,10 +122,16 @@
 
 			timer {
 				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			};
+
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
 			};
 
 			odmi: odmi@300000 {
@@ -140,6 +146,14 @@
 				marvell,spi-base = <128>, <136>, <144>, <152>;
 			};
 
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			xor@400000 {
 				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
 				reg = <0x400000 0x1000>,
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index da31bbb..e5e3ed6 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -176,6 +176,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -201,6 +202,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
@@ -227,6 +229,7 @@
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			dma-coherent;
+			msi-parent = <&gic_v2m0>;
 
 			bus-range = <0 0xff>;
 			ranges =
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
new file mode 100644
index 0000000..842fb33
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada CP110 Slave.
+ */
+
+/ {
+	cp110-slave {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf4000000 0x2000000>;
+
+			cps_syscon0: system-controller@440000 {
+				compatible = "marvell,cp110-system-controller0",
+					     "syscon";
+				reg = <0x440000 0x1000>;
+				#clock-cells = <2>;
+				core-clock-output-names =
+					"cps-apll", "cps-ppv2-core", "cps-eip",
+					"cps-core", "cps-nand-core";
+				gate-clock-output-names =
+					"cps-audio", "cps-communit", "cps-nand",
+					"cps-ppv2", "cps-sdio", "cps-mg-domain",
+					"cps-mg-core", "cps-xor1", "cps-xor0",
+					"cps-gop-dp", "none", "cps-pcie_x10",
+					"cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor",
+					"cps-sata", "cps-sata-usb", "cps-main",
+					"cps-sd-mmc", "none", "none",
+					"cps-slow-io", "cps-usb3h0", "cps-usb3h1",
+					"cps-usb3dev", "cps-eip150", "cps-eip197";
+			};
+
+			cps_sata0: sata@540000 {
+				compatible = "marvell,armada-8k-ahci";
+				reg = <0x540000 0x30000>;
+				interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 15>;
+				status = "disabled";
+			};
+
+			cps_usb3_0: usb3@500000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x500000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 22>;
+				status = "disabled";
+			};
+
+			cps_usb3_1: usb3@510000 {
+				compatible = "marvell,armada-8k-xhci",
+					     "generic-xhci";
+				reg = <0x510000 0x4000>;
+				dma-coherent;
+				interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 23>;
+				status = "disabled";
+			};
+
+			cps_xor0: xor@6a0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6a0000 0x1000>,
+				      <0x6b0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 8>;
+			};
+
+			cps_xor1: xor@6c0000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x6c0000 0x1000>,
+				      <0x6d0000 0x1000>;
+				dma-coherent;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&cps_syscon0 1 7>;
+			};
+
+			cps_spi0: spi@700600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700600 0x50>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+				cell-index = <1>;
+				clocks = <&cps_syscon0 0 3>;
+				status = "disabled";
+			};
+
+			cps_spi1: spi@700680 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x700680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <2>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c0: i2c@701000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+
+			cps_i2c1: i2c@701100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x701100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cps_syscon0 1 21>;
+				status = "disabled";
+			};
+		};
+
+		cps_pcie0: pcie@f4600000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4600000 0 0x10000>,
+			      <0 0xfaf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd000000 0  0xfd000000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfa000000 0  0xfa000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 13>;
+			status = "disabled";
+		};
+
+		cps_pcie1: pcie@f4620000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4620000 0 0x10000>,
+			      <0 0xfbf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd010000 0  0xfd010000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfb000000 0  0xfb000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 11>;
+			status = "disabled";
+		};
+
+		cps_pcie2: pcie@f4640000 {
+			compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+			reg = <0 0xf4640000 0 0x10000>,
+			      <0 0xfcf00000 0 0x80000>;
+			reg-names = "ctrl", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+
+			bus-range = <0 0xff>;
+			ranges =
+				/* downstream I/O */
+				<0x81000000 0 0xfd020000 0  0xfd020000 0 0x10000
+				/* non-prefetchable memory */
+				0x82000000 0 0xfc000000 0  0xfc000000 0 0xf00000>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>;
+
+			num-lanes = <1>;
+			clocks = <&cps_syscon0 1 12>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index 099ad93..85c23fa 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -68,6 +68,7 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -76,6 +77,7 @@
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -84,6 +86,7 @@
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
@@ -92,9 +95,14 @@
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
+		l2: cache {
+			compatible = "cache";
+		};
+
 		idle-states {
 			entry-method = "psci";
 			CPU_SLEEP_0: cpu-sleep-0 {
@@ -115,7 +123,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
@@ -279,7 +287,6 @@
 				reg = <0x4000 0x100>;
 				clocks = <&osc>;
 				interrupts = <1>;
-				status = "disabled";
 			};
 
 			wdt2: watchdog@5000 {
@@ -287,7 +294,6 @@
 				reg = <0x5000 0x100>;
 				clocks = <&osc>;
 				interrupts = <2>;
-				status = "disabled";
 			};
 
 			sm_gpio0: gpio@8000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 7453a47..2a7f731 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -42,6 +42,44 @@
 		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+};
+
+&cec {
+	status = "okay";
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
 };
 
 &i2c1 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 10f638f..1c71e25 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -254,6 +254,16 @@
 				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 
+			hdmi_pin: xxx {
+
+				/*hdmi htplg pin*/
+				pins1 {
+					pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
+
 			i2c0_pins_a: i2c0 {
 				pins1 {
 					pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
@@ -341,6 +351,14 @@
 			clock-names = "spi", "wrap";
 		};
 
+		cec: cec@10013000 {
+			compatible = "mediatek,mt8173-cec";
+			reg = <0 0x10013000 0 0xbc>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CEC>;
+			status = "disabled";
+		};
+
 		vpu: vpu@10020000 {
 			compatible = "mediatek,mt8173-vpu";
 			reg = <0 0x10020000 0 0x30000>,
@@ -383,6 +401,19 @@
 			#clock-cells = <1>;
 		};
 
+		hdmi_phy: hdmi-phy@10209100 {
+			compatible = "mediatek,mt8173-hdmi-phy";
+			reg = <0 0x10209100 0 0x24>;
+			clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+			clock-names = "pll_ref";
+			clock-output-names = "hdmitx_dig_cts";
+			mediatek,ibias = <0xa>;
+			mediatek,ibias_up = <0x1c>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		mipi_tx0: mipi-dphy@10215000 {
 			compatible = "mediatek,mt8173-mipi-tx";
 			reg = <0 0x10215000 0 0x1000>;
@@ -577,6 +608,14 @@
 			status = "disabled";
 		};
 
+		hdmiddc0: i2c@11012000 {
+			compatible = "mediatek,mt8173-hdmi-ddc";
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0 0x11012000 0 0x1C>;
+			clocks = <&pericfg CLK_PERI_I2C5>;
+			clock-names = "ddc-i2c";
+		};
+
 		i2c6: i2c@11013000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11013000 0 0x70>,
@@ -885,6 +924,12 @@
 				 <&apmixedsys CLK_APMIXED_TVDPLL>;
 			clock-names = "pixel", "engine", "pll";
 			status = "disabled";
+
+			port {
+				dpi0_out: endpoint {
+					remote-endpoint = <&hdmi0_in>;
+				};
+			};
 		};
 
 		pwm0: pwm@1401e000 {
@@ -942,6 +987,38 @@
 			clocks = <&mmsys CLK_MM_DISP_OD>;
 		};
 
+		hdmi0: hdmi@14025000 {
+			compatible = "mediatek,mt8173-hdmi";
+			reg = <0 0x14025000 0 0x400>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+				 <&mmsys CLK_MM_HDMI_PLLCK>,
+				 <&mmsys CLK_MM_HDMI_AUDIO>,
+				 <&mmsys CLK_MM_HDMI_SPDIF>;
+			clock-names = "pixel", "pll", "bclk", "spdif";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pin>;
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi";
+			mediatek,syscon-hdmi = <&mmsys 0x900>;
+			assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+			assigned-clock-parents = <&hdmi_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hdmi0_in: endpoint {
+						remote-endpoint = <&dpi0_out>;
+					};
+				};
+			};
+		};
+
 		larb4: larb@14027000 {
 			compatible = "mediatek,mt8173-smi-larb";
 			reg = <0 0x14027000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 2013f89..3f3a46a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra132", "nvidia,tegra124";
@@ -727,8 +728,10 @@
 	};
 
 	soctherm: thermal-sensor@700e2000 {
-		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x1000>;
+		compatible = "nvidia,tegra132-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
+			0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg-names = "soctherm-reg", "ccroc-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
 			<&tegra_car TEGRA124_CLK_SOC_THERM>;
@@ -736,6 +739,118 @@
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
 		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <102000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		mem {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		pllx {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
 	};
 
 	ahub@70300000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 431266a..c2becb6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -27,6 +27,12 @@
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
 
+	host1x@50000000 {
+		dpaux: dpaux@545c0000 {
+			status = "okay";
+		};
+	};
+
 	pinmux: pinmux@700008d4 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1556,6 +1562,46 @@
 		};
 	};
 
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nau8825@1a {
+			compatible = "nuvoton,nau8825";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
+			clock-names = "mclk";
+
+			nuvoton,jkdet-enable;
+			nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+			nuvoton,vref-impedance = <2>;
+			nuvoton,micbias-voltage = <6>;
+			nuvoton,sar-threshold-num = <4>;
+			nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+			nuvoton,sar-hysteresis = <1>;
+			nuvoton,sar-voltage = <0>;
+			nuvoton,sar-compare-time = <0>;
+			nuvoton,sar-sampling-time = <0>;
+			nuvoton,short-key-debounce = <2>;
+			nuvoton,jack-insert-debounce = <7>;
+			nuvoton,jack-eject-debounce = <7>;
+			status = "okay";
+		};
+
+		audio-codec@2d {
+			compatible = "realtek,rt5677";
+			reg = <0x2d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
+			realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "okay";
+		};
+	};
+
 	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
@@ -1568,12 +1614,81 @@
 		status = "okay";
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
 	sdhci@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
 	};
 
+	aconnect@702c0000 {
+		status = "okay";
+
+		dma@702e2000 {
+			status = "okay";
+		};
+
+		agic@702f9000 {
+			status = "okay";
+		};
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1646,6 +1761,11 @@
 		};
 	};
 
+	max98357a {
+		compatible = "maxim,max98357a";
+		status = "okay";
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index c4cfdcf..46045fe 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/memory/tegra210-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 / {
 	compatible = "nvidia,tegra210";
@@ -34,6 +35,7 @@
 			clock-names = "dpaux", "parent";
 			resets = <&tegra_car 207>;
 			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 
 			state_dpaux1_aux: pinmux-aux {
@@ -108,6 +110,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
 
 			status = "disabled";
@@ -137,6 +140,7 @@
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
+			power-domains = <&pd_sor>;
 			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
 
 			status = "disabled";
@@ -178,6 +182,7 @@
 			pinctrl-1 = <&state_dpaux_i2c>;
 			pinctrl-2 = <&state_dpaux_off>;
 			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 		};
 
@@ -197,6 +202,7 @@
 			pinctrl-1 = <&state_dpaux1_i2c>;
 			pinctrl-2 = <&state_dpaux1_off>;
 			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 		};
 
@@ -209,6 +215,7 @@
 			clock-names = "dpaux", "parent";
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
 			status = "disabled";
 
 			state_dpaux_aux: pinmux-aux {
@@ -325,7 +332,7 @@
 	};
 
 	gpio: gpio@6000d000 {
-		compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
@@ -648,27 +655,41 @@
 				#power-domain-cells = <0>;
 			};
 
+			pd_sor: sor {
+				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				resets = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				#power-domain-cells = <0>;
+			};
+
 			pd_xusbss: xusba {
 				clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
-				clock-names = "xusb-ss";
 				resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
-				reset-names = "xusb-ss";
 				#power-domain-cells = <0>;
 			};
 
 			pd_xusbdev: xusbb {
 				clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
-				clock-names = "xusb-dev";
 				resets = <&tegra_car 95>;
-				reset-names = "xusb-dev";
 				#power-domain-cells = <0>;
 			};
 
 			pd_xusbhost: xusbc {
 				clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
-				clock-names = "xusb-host";
 				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
-				reset-names = "xusb-host";
 				#power-domain-cells = <0>;
 			};
 		};
@@ -948,6 +969,7 @@
 		reg = <0x0 0x700e3000 0x0 0x100>;
 		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
 		clock-names = "mipi-cal";
+		power-domains = <&pd_sor>;
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
@@ -961,6 +983,50 @@
 		#size-cells = <1>;
 		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
 		status = "disabled";
+
+		adma: dma@702e2000 {
+			compatible = "nvidia,tegra210-adma";
+			reg = <0x702e2000 0x2000>;
+			interrupt-parent = <&agic>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: agic@702f9000 {
+			compatible = "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x702f9000 0x2000>,
+			      <0x702fa000 0x2000>;
+			interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&tegra_car TEGRA210_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
 	};
 
 	spi@70410000 {
@@ -1094,4 +1160,130 @@
 				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&gic>;
 	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra210-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
+			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+			<&tegra_car TEGRA210_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <102500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <98500>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		mem {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+		pllx {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index fa1f661..5dd05de 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index ee828a8..e1e6c6b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -24,4 +24,52 @@
 			bias-pull-up;
 		};
 	};
+
+	adv7533_int_active: adv533_int_active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_int_suspend: adv7533_int_suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio31";
+		};
+		pinconf {
+			pins = "gpio31";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_active: adv7533_switch_active {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	adv7533_switch_suspend: adv7533_switch_suspend {
+		pinmux {
+			function = "gpio";
+			pins = "gpio32";
+		};
+		pinconf {
+			pins = "gpio32";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 18639bc..bb062b5 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -63,6 +63,47 @@
 		/* On High speed expansion */
 			label = "HS-I2C2";
 			status = "okay";
+
+			adv_bridge: bridge@39 {
+				status = "okay";
+
+				compatible = "adi,adv7533";
+				reg = <0x39>;
+
+				interrupt-parent = <&msmgpio>;
+				interrupts = <31 2>;
+
+				adi,dsi-lanes = <4>;
+
+				pd-gpios = <&msmgpio 32 0>;
+
+				avdd-supply = <&pm8916_l6>;
+				v1p2-supply = <&pm8916_l6>;
+				v3p3-supply = <&pm8916_l17>;
+
+				pinctrl-names = "default","sleep";
+				pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+				pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						adv7533_in: endpoint {
+							remote-endpoint = <&dsi0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						adv7533_out: endpoint {
+							remote-endpoint = <&hdmi_con>;
+						};
+					};
+				};
+			};
 		};
 
 		i2c@78ba000 {
@@ -180,6 +221,36 @@
 		lpass@07708000 {
 			status = "okay";
 		};
+
+		mdss@1a00000 {
+			status = "okay";
+
+			mdp@1a01000 {
+				status = "okay";
+			};
+
+			dsi@1a98000 {
+				status = "okay";
+
+				vdda-supply = <&pm8916_l2>;
+				vddio-supply = <&pm8916_l6>;
+
+				ports {
+					port@1 {
+						endpoint {
+							remote-endpoint = <&adv7533_in>;
+							data-lanes = <0 1 2 3>;
+						};
+					};
+				};
+			};
+
+			dsi-phy@1a98300 {
+				status = "okay";
+
+				vddio-supply = <&pm8916_l6>;
+			};
+		};
 	};
 
 	usb2513 {
@@ -194,6 +265,17 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
 };
 
 &smd_rpm_regulators {
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
new file mode 100644
index 0000000..24552f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+&msmgpio {
+	sdc2_cd_on: sdc2_cd_on {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+	};
+
+	sdc2_cd_off: sdc2_cd_off {
+		mux {
+			pins = "gpio38";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio38";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+};
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index d8060df..230e9c8 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -1,4 +1,5 @@
-/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -10,22 +11,11 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/init.h>
+/dts-v1/;
 
-#include <asm/mach/arch.h>
+#include "apq8096-db820c.dtsi"
 
-static const char * const qcom_dt_match[] __initconst = {
-	"qcom,apq8064",
-	"qcom,apq8074-dragonboard",
-	"qcom,apq8084",
-	"qcom,ipq8062",
-	"qcom,ipq8064",
-	"qcom,msm8660-surf",
-	"qcom,msm8960-cdp",
-	"qcom,mdm9615",
-	NULL
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
 };
-
-DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
-	.dt_compat = qcom_dt_match,
-MACHINE_END
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
new file mode 100644
index 0000000..afb218c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+#include "apq8096-db820c-pins.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp2_uart2;
+		i2c0	= &blsp1_i2c2;
+		i2c1	= &blsp2_i2c1;
+		i2c2	= &blsp2_i2c0;
+		spi0	= &blsp1_spi0;
+		spi1	= &blsp2_spi5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	soc {
+		serial@75b0000 {
+			label = "LS-UART1";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_2pins_default>;
+			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+		};
+
+		serial@75b1000 {
+			label = "LS-UART0";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_4pins_default>;
+			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+		};
+
+		i2c@07577000 {
+		/* On Low speed expansion */
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		i2c@075b6000 {
+		/* On Low speed expansion */
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		spi@07575000 {
+		/* On Low speed expansion */
+			label = "LS-SPI0";
+			status = "okay";
+		};
+
+		i2c@075b5000 {
+		/* On High speed expansion */
+			label = "HS-I2C2";
+			status = "okay";
+		};
+
+		spi@075ba000{
+		/* On High speed expansion */
+			label = "HS-SPI1";
+			status = "okay";
+		};
+
+		sdhci@74a4900 {
+		/* External SD card */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+			cd-gpios = <&msmgpio 38 0x1>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 11bdc24..466ca57 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -86,6 +86,11 @@
 			reg = <0x0 0x89300000 0x0 0x600000>;
 			no-map;
 		};
+
+		mba_mem: mba@8ea00000 {
+			no-map;
+			reg = <0 0x8ea00000 0 0x100000>;
+		};
 	};
 
 	cpus {
@@ -155,6 +160,49 @@
 		interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -187,10 +235,11 @@
 	};
 
 	firmware {
-		scm {
+		scm: scm {
 			compatible = "qcom,scm";
 			clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
 		};
 	};
 
@@ -228,6 +277,11 @@
 			reg = <0x1905000 0x20000>;
 		};
 
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x1937000 0x30000>;
+		};
+
 		tcsr_mutex: hwlock {
 			compatible = "qcom,tcsr-mutex";
 			syscon = <&tcsr_mutex_regs 0 0x1000>;
@@ -483,7 +537,7 @@
 			compatible = "qcom,ci-hdrc";
 			reg = <0x78d9000 0x400>;
 			dr_mode = "peripheral";
-			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			usb-phy = <&usb_otg>;
 			status = "disabled";
 		};
@@ -491,7 +545,7 @@
 		usb_host: ehci@78d9000 {
 			compatible = "qcom,ehci-host";
 			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
 			usb-phy = <&usb_otg>;
 			status = "disabled";
 		};
@@ -499,8 +553,8 @@
 		usb_otg: phy@78d9000 {
 			compatible = "qcom,usb-otg-snps";
 			reg = <0x78d9000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
-				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 
 			qcom,vdd-levels = <500000 1000000 1320000>;
 			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
@@ -594,7 +648,7 @@
 			      <0x200a000 0x002100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -609,6 +663,144 @@
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,qfprom";
+			reg = <0x5c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			tsens_caldata: caldata@d0 {
+				reg = <0xd0 0x8>;
+			};
+			tsens_calsel: calsel@ec {
+				reg = <0xec 0x4>;
+			};
+		};
+
+		tsens: thermal-sensor@4a8000 {
+			compatible = "qcom,msm8916-tsens";
+			reg = <0x4a8000 0x2000>;
+			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+			nvmem-cell-names = "calib", "calib_sel";
+			#thermal-sensor-cells = <1>;
+		};
+
+		mdss: mdss@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x1a00000 0x1000>,
+			      <0x1ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface_clk",
+				      "bus_clk",
+				      "vsync_clk";
+
+			interrupts = <0 72 0>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdp: mdp@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x1a01000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface_clk",
+					      "bus_clk",
+					      "core_clk",
+					      "vsync_clk";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+				};
+			};
+
+			dsi0: dsi@1a98000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x1a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 0>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&dsi_phy0 0>,
+							 <&dsi_phy0 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core_clk",
+					      "iface_clk",
+					      "bus_clk",
+					      "byte_clk",
+					      "pixel_clk",
+					      "core_clk";
+				phys = <&dsi_phy0>;
+				phy-names = "dsi-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			dsi_phy0: dsi-phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x1a98300 0xd4>,
+				      <0x1a98500 0x280>,
+				      <0x1a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>;
+				clock-names = "iface_clk";
+			};
+		};
 	};
 
 	smd {
@@ -657,6 +849,88 @@
 			};
 		};
 	};
+
+	hexagon-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	wcnss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 0 13>;
+		qcom,ipc-6 = <&apcs 0 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
 };
 
 #include "msm8916-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 55ec3e8..338f82a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -97,6 +97,92 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -181,6 +267,12 @@
 			status = "disabled";
 		};
 
+		tsens0: thermal-sensor@4a8000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4a8000 0x2000>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
@@ -339,7 +431,7 @@
 			      <0x400a000 0x002100>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 17139f7..eb72830 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
new file mode 100644
index 0000000..bcb11a8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -0,0 +1,328 @@
+/*
+ * Device Tree Source for the H3ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas H3ULCB board based on r8a7795";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	avb_pins: avb {
+		groups = "avb_mdc";
+		function = "avb";
+	};
+
+	sdhi0_pins_3v3: sd0_3v3 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins_3v3>;
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <900>;
+		rxdv-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		txc-skew-ps = <900>;
+		txen-skew-ps = <0>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 98f0263..b1eab68 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -110,6 +110,17 @@
 			  1800000 0>;
 	};
 
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	audio_clkout: audio_clkout {
 		/*
 		 * This is same as <&rcar_sound 0>
@@ -135,6 +146,52 @@
 			sound-dai = <&ak4613>;
 		};
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
 };
 
 &extal_clk {
@@ -172,6 +229,11 @@
 		function = "avb";
 	};
 
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -193,6 +255,11 @@
 		function = "audio_clk";
 	};
 
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
 	usb1_pins: usb1 {
 		groups = "usb1";
 		function = "usb1";
@@ -369,6 +436,14 @@
 	status = "okay";
 };
 
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
 &usb2_phy1 {
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
@@ -383,6 +458,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -391,6 +470,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };
@@ -399,6 +482,10 @@
 	status = "okay";
 };
 
+&hsusb {
+	status = "okay";
+};
+
 &pcie_bus_clk {
 	clock-frequency = <100000000>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index b902356..8c15040 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -328,7 +328,8 @@
 		};
 
 		audma0: dma-controller@ec700000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec700000 0 0x10000>;
 			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
@@ -360,7 +361,8 @@
 		};
 
 		audma1: dma-controller@ec720000 {
-			compatible = "renesas,rcar-dmac";
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
 			reg = <0 0xec720000 0 0x10000>;
 			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
 				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
@@ -1098,6 +1100,7 @@
 			reg = <0 0xee100000 0 0x2000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1107,6 +1110,7 @@
 			reg = <0 0xee120000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
@@ -1116,8 +1120,8 @@
 			reg = <0 0xee140000 0 0x2000>;
 			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1126,8 +1130,8 @@
 			reg = <0 0xee160000 0 0x2000>;
 			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-			cap-mmc-highspeed;
 			status = "disabled";
 		};
 
@@ -1224,6 +1228,23 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		pciec0: pcie@fe000000 {
 			compatible = "renesas,pcie-r8a7795";
 			reg = <0 0xfe000000 0 0x80000>;
@@ -1273,5 +1294,252 @@
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			status = "disabled";
 		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		fcpf2: fcp@fe952000 {
+			compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
+			reg = <0 0xfe952000 0 0x200>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspi2: vsp@fe9c0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9c0000 0 0x8000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+
+			renesas,fcp = <&fcpvi2>;
+		};
+
+		fcpvi2: fcp@fe9cf000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfe9cf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 609>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x4000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x4000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x4000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		vspd3: vsp@fea38000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea38000 0 0x4000>;
+			interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+
+			renesas,fcp = <&fcpvd3>;
+		};
+
+		fcpvd3: fcp@fea3f000 {
+			compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
+			reg = <0 0xfea3f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 600>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fdp1@fe948000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe948000 0 0x2400>;
+			interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 117>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			renesas,fcp = <&fcpf2>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>,
+			      <0 0xfeb90000 0 0x14>;
+			reg-names = "du", "lvds.0";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>,
+				 <&cpg CPG_MOD 721>,
+				 <&cpg CPG_MOD 727>;
+			clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+			status = "disabled";
+
+			vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index e72be38..13db7d6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -31,11 +31,27 @@
 	};
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+};
+
 &extal_clk {
 	clock-frequency = <16666666>;
 };
 
 &scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 1edf824..9217da9 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -107,6 +107,123 @@
 			status = "disabled";
 		};
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7796-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7037a16..87669f6 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
new file mode 100644
index 0000000..5797933
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Rockchip Orion R68";
+	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power {
+			wakeup-source;
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+			label = "orion:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+			default-state = "on";
+		};
+
+		blue {
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			label = "orion:blue:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&stby_pwren>;
+			default-state = "off";
+		};
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd";
+		gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: vcc-io-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name= "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	mmc-hs200-1_2v;
+	mmc-hs200-1_8v;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 12 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	clock-freq-min-max = <400000 50000000>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	keep-power-in-suspend;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 82a32e5..eed1ef6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -248,7 +248,6 @@
 &sdio0 {
 	assigned-clocks = <&cru SCLK_SDIO0>;
 	assigned-clock-parents = <&cru PLL_CPLL>;
-	broken-cd;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 4f44d11..0fcb214 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -641,6 +642,15 @@
 			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
 			status = "disabled";
 		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
 	};
 
 	cru: clock-controller@ff760000 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index d33aa06..8e82497 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -49,6 +49,13 @@
 	compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
 		     "google,rk3399evb-rev2";
 
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
 	vdd_center: vdd-center {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 25000 0>;
@@ -69,18 +76,61 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc_phy: vcc-phy-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_phy";
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 };
 
 &emmc_phy {
 	status = "okay";
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
 &pwm0 {
 	status = "okay";
 };
@@ -101,6 +151,36 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn>;
+	status = "disabled";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -133,4 +213,11 @@
 				<1 18 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a6dd623..b65c193 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -152,6 +153,16 @@
 		};
 	};
 
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -159,10 +170,10 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
 	};
 
 	xin24m: xin24m {
@@ -181,8 +192,8 @@
 		dmac_bus: dma-controller@ff6d0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xff6d0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			clocks = <&cru ACLK_DMAC0_PERILP>;
 			clock-names = "apb_pclk";
@@ -191,19 +202,39 @@
 		dmac_peri: dma-controller@ff6e0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xff6e0000 0x0 0x4000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			clocks = <&cru ACLK_DMAC1_PERILP>;
 			clock-names = "apb_pclk";
 		};
 	};
 
+	gmac: ethernet@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		power-domains = <&power RK3399_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	sdio0: dwmmc@fe310000 {
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe310000 0x0 0x4000>;
-		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
 		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
@@ -216,7 +247,7 @@
 		compatible = "rockchip,rk3399-dw-mshc",
 			     "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe320000 0x0 0x4000>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
 		clock-freq-min-max = <400000 150000000>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
@@ -228,7 +259,7 @@
 	sdhci: sdhci@fe330000 {
 		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
 		reg = <0x0 0xfe330000 0x0 0x10000>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 		arasan,soc-ctl-syscon = <&grf>;
 		assigned-clocks = <&cru SCLK_EMMC>;
 		assigned-clock-rates = <200000000>;
@@ -241,19 +272,60 @@
 		status = "disabled";
 	};
 
+	pcie0: pcie@f8000000 {
+		compatible = "rockchip,rk3399-pcie";
+		reg = <0x0 0xf8000000 0x0 0x2000000>,
+		      <0x0 0xfd000000 0x0 0x1000000>;
+		reg-names = "axi-base", "apb-base";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		bus-range = <0x0 0x1>;
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "legacy", "client";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+				<0 0 0 2 &pcie0_intc 1>,
+				<0 0 0 3 &pcie0_intc 2>,
+				<0 0 0 4 &pcie0_intc 3>;
+		msi-map = <0x0 &its 0x0 0x1000>;
+		phys = <&pcie_phy>;
+		phy-names = "pcie-phy";
+		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+			  0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		status = "disabled";
+
+		pcie0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
 	usb_host0_ehci: usb@fe380000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe380000 0x0 0x20000>;
-		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
 	usb_host0_ohci: usb@fe3a0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0xfe3a0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>;
 		clock-names = "hclk_host0", "hclk_host0_arb";
 		status = "disabled";
@@ -262,16 +334,18 @@
 	usb_host1_ehci: usb@fe3c0000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe3c0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
 		status = "disabled";
 	};
 
 	usb_host1_ohci: usb@fe3e0000 {
 		compatible = "generic-ohci";
 		reg = <0x0 0xfe3e0000 0x0 0x20000>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>;
 		clock-names = "hclk_host1", "hclk_host1_arb";
 		status = "disabled";
@@ -279,7 +353,7 @@
 
 	gic: interrupt-controller@fee00000 {
 		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
+		#interrupt-cells = <4>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -290,12 +364,34 @@
 		      <0x0 0xfff00000 0 0x10000>, /* GICC */
 		      <0x0 0xfff10000 0 0x10000>, /* GICH */
 		      <0x0 0xfff20000 0 0x10000>; /* GICV */
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 		its: interrupt-controller@fee20000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
 			reg = <0x0 0xfee20000 0x0 0x20000>;
 		};
+
+		ppi-partitions {
+			ppi_cluster0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_cluster1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1>;
+			};
+		};
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,rk3399-saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
 	};
 
 	i2c1: i2c@ff110000 {
@@ -305,7 +401,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c1_xfer>;
 		#address-cells = <1>;
@@ -320,7 +416,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c2_xfer>;
 		#address-cells = <1>;
@@ -335,7 +431,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c3_xfer>;
 		#address-cells = <1>;
@@ -350,7 +446,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_xfer>;
 		#address-cells = <1>;
@@ -365,7 +461,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_xfer>;
 		#address-cells = <1>;
@@ -380,7 +476,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_xfer>;
 		#address-cells = <1>;
@@ -393,7 +489,7 @@
 		reg = <0x0 0xff180000 0x0 0x100>;
 		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -406,7 +502,7 @@
 		reg = <0x0 0xff190000 0x0 0x100>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -419,7 +515,7 @@
 		reg = <0x0 0xff1a0000 0x0 0x100>;
 		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -432,7 +528,7 @@
 		reg = <0x0 0xff1b0000 0x0 0x100>;
 		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -445,7 +541,7 @@
 		reg = <0x0 0xff1c0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
 		#address-cells = <1>;
@@ -458,7 +554,7 @@
 		reg = <0x0 0xff1d0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
 		#address-cells = <1>;
@@ -471,7 +567,7 @@
 		reg = <0x0 0xff1e0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
 		#address-cells = <1>;
@@ -484,7 +580,7 @@
 		reg = <0x0 0xff1f0000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
 		#address-cells = <1>;
@@ -497,7 +593,7 @@
 		reg = <0x0 0xff200000 0x0 0x1000>;
 		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
 		#address-cells = <1>;
@@ -577,7 +673,7 @@
 	tsadc: tsadc@ff260000 {
 		compatible = "rockchip,rk3399-tsadc";
 		reg = <0x0 0xff260000 0x0 0x100>;
-		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
 		assigned-clocks = <&cru SCLK_TSADC>;
 		assigned-clock-rates = <750000>;
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
@@ -594,6 +690,203 @@
 		status = "disabled";
 	};
 
+	qos_gmac: qos@ffa5c000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa5c000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@ffa90000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	qos_iep: qos@ffa98000 {
+		compatible = "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+
+	qos_isp0_m0: qos@ffaa0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_isp0_m1: qos@ffaa0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_isp1_m0: qos@ffaa8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+
+	qos_isp1_m1: qos@ffaa8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffab0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffab0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+
+	qos_video_m0: qos@ffab8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+
+	qos_video_m1_r: qos@ffac0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+
+	qos_video_m1_w: qos@ffac0080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+
+	qos_vop_big_r: qos@ffac8000 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+
+	qos_vop_big_w: qos@ffac8080 {
+		compatible = "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+
+	qos_vop_little: qos@ffad0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffae0000 {
+		compatible = "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		/*
+		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+		 * Some of the power domains are grouped together for every
+		 * voltage domain.
+		 * The detail contents as below.
+		 */
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_CENTER */
+			pd_iep@RK3399_PD_IEP {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+			};
+			pd_rga@RK3399_PD_RGA {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+			};
+			pd_vcodec@RK3399_PD_VCODEC {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+			};
+			pd_vdu@RK3399_PD_VDU {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+			};
+
+			/* These power domains are grouped by VD_GPU */
+			pd_gpu@RK3399_PD_GPU {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			pd_gmac@RK3399_PD_GMAC {
+				reg = <RK3399_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>;
+				pm_qos = <&qos_gmac>;
+			};
+			pd_vio@RK3399_PD_VIO {
+				reg = <RK3399_PD_VIO>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pd_hdcp@RK3399_PD_HDCP {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+				};
+				pd_isp0@RK3399_PD_ISP0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+				};
+				pd_isp1@RK3399_PD_ISP1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+				};
+				pd_tcpc0@RK3399_PD_TCPC0 {
+					reg = <RK3399_PD_TCPD0>;
+					clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+						 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				};
+				pd_tcpc1@RK3399_PD_TCPC1 {
+					reg = <RK3399_PD_TCPD1>;
+					clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+						 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				};
+				pd_vo@RK3399_PD_VO {
+					reg = <RK3399_PD_VO>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pd_vopb@RK3399_PD_VOPB {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+					};
+					pd_vopl@RK3399_PD_VOPL {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+					};
+				};
+			};
+		};
+	};
+
 	pmugrf: syscon@ff320000 {
 		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xff320000 0x0 0x1000>;
@@ -611,7 +904,7 @@
 		reg = <0x0 0xff350000 0x0 0x1000>;
 		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
 		clock-names = "spiclk", "apb_pclk";
-		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
 		#address-cells = <1>;
@@ -624,7 +917,7 @@
 		reg = <0x0 0xff370000 0x0 0x100>;
 		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
 		clock-names = "baudclk", "apb_pclk";
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		pinctrl-names = "default";
@@ -639,7 +932,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c0_xfer>;
 		#address-cells = <1>;
@@ -654,7 +947,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_xfer>;
 		#address-cells = <1>;
@@ -669,7 +962,7 @@
 		assigned-clock-rates = <200000000>;
 		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
 		clock-names = "i2c", "pclk";
-		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_xfer>;
 		#address-cells = <1>;
@@ -721,6 +1014,35 @@
 		status = "disabled";
 	};
 
+	efuse0: efuse@ff690000 {
+		compatible = "rockchip,rk3399-efuse";
+		reg = <0x0 0xff690000 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE1024NS>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpub_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		gpu_leakage: gpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+		center_leakage: center-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		cpul_leakage: cpu-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+		logic_leakage: logic-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+		wafer_info: wafer-info@1c {
+			reg = <0x1c 0x1>;
+		};
+	};
+
 	pmucru: pmu-clock-controller@ff750000 {
 		compatible = "rockchip,rk3399-pmucru";
 		reg = <0x0 0xff750000 0x0 0x1000>;
@@ -741,7 +1063,7 @@
 			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
 			<&cru PCLK_PERIHP>,
 			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
-			<&cru PCLK_PERILP0>,
+			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
 			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>;
 		assigned-clock-rates =
 			 <594000000>,  <800000000>,
@@ -749,7 +1071,7 @@
 			 <150000000>,   <75000000>,
 			  <37500000>,
 			 <100000000>,  <100000000>,
-			  <50000000>,
+			  <50000000>, <600000000>,
 			 <100000000>,   <50000000>;
 	};
 
@@ -764,6 +1086,40 @@
 			status = "disabled";
 		};
 
+		u2phy0: usb2-phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2-phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+
 		emmc_phy: phy@f780 {
 			compatible = "rockchip,rk3399-emmc-phy";
 			reg = <0xf780 0x24>;
@@ -772,19 +1128,85 @@
 			#phy-cells = <0>;
 			status = "disabled";
 		};
+
+		pcie_phy: pcie-phy {
+			compatible = "rockchip,rk3399-pcie-phy";
+			clocks = <&cru SCLK_PCIEPHY_REF>;
+			clock-names = "refclk";
+			#phy-cells = <0>;
+			resets = <&cru SRST_PCIEPHY>;
+			reset-names = "phy";
+			status = "disabled";
+		};
 	};
 
-	watchdog@ff840000 {
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+		status = "disabled";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+		status = "disabled";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	watchdog@ff848000 {
 		compatible = "snps,dw-wdt";
-		reg = <0x0 0xff840000 0x0 0x100>;
+		reg = <0x0 0xff848000 0x0 0x100>;
 		clocks = <&cru PCLK_WDT>;
-		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
 	};
 
 	rktimer: rktimer@ff850000 {
 		compatible = "rockchip,rk3399-timer";
 		reg = <0x0 0xff850000 0x0 0x1000>;
-		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
 		clock-names = "pclk", "timer";
 	};
@@ -792,7 +1214,7 @@
 	spdif: spdif@ff870000 {
 		compatible = "rockchip,rk3399-spdif";
 		reg = <0x0 0xff870000 0x0 0x1000>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 7>;
 		dma-names = "tx";
 		clock-names = "mclk", "hclk";
@@ -806,7 +1228,7 @@
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff880000 0x0 0x1000>;
 		rockchip,grf = <&grf>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -819,7 +1241,7 @@
 	i2s1: i2s@ff890000 {
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff890000 0x0 0x1000>;
-		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -832,7 +1254,7 @@
 	i2s2: i2s@ff8a0000 {
 		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
 		reg = <0x0 0xff8a0000 0x0 0x1000>;
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
 		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
 		dma-names = "tx", "rx";
 		clock-names = "i2s_clk", "i2s_hclk";
@@ -852,7 +1274,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff720000 0x0 0x100>;
 			clocks = <&pmucru PCLK_GPIO0_PMU>;
-			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -865,7 +1287,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff730000 0x0 0x100>;
 			clocks = <&pmucru PCLK_GPIO1_PMU>;
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -878,7 +1300,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff780000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -891,7 +1313,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff788000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO3>;
-			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -904,7 +1326,7 @@
 			compatible = "rockchip,gpio-bank";
 			reg = <0x0 0xff790000 0x0 0x100>;
 			clocks = <&cru PCLK_GPIO4>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			gpio-controller;
 			#gpio-cells = <0x2>;
@@ -955,6 +1377,72 @@
 			drive-strength = <13>;
 		};
 
+		clock {
+			clk_32k: clk-32k {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 17 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 14 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 3 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 2 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 0 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxer */
+					<3 10 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins =
@@ -1326,5 +1814,18 @@
 					<1 14 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		pcie {
+			pcie_clkreqn: pci-clkreqn {
+				rockchip,pins =
+					<2 26 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			pcie_clkreqnb: pci-clkreqnb {
+				rockchip,pins =
+					<4 24 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
index 299b67e..5538598 100644
--- a/arch/arm64/boot/dts/socionext/Makefile
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld20-ref.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld11-ref.dtb \
+	uniphier-ld20-ref.dtb
 
 always		:= $(dtb-y)
 clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
new file mode 100644
index 0000000..7168cf8
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -0,0 +1,100 @@
+/*
+ * Device Tree Source for UniPhier LD11 Reference Board
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ld11.dtsi"
+/include/ "uniphier-ref-daughter.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
new file mode 100644
index 0000000..3eb4c42
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -0,0 +1,338 @@
+/*
+ * Device Tree Source for UniPhier LD11 SoC
+ *
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
+
+/ {
+	compatible = "socionext,uniphier-ld11";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000000>;
+		};
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&peri_clk 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 243 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 244 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 245 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>;
+		};
+
+		mioctrl@5b3e0000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld11-pinctrl";
+			};
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe40000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 2adad8c..609162a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 Reference Board
+ * Device Tree Source for UniPhier LD20 Reference Board
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -43,13 +44,13 @@
  */
 
 /dts-v1/;
-/include/ "uniphier-ph1-ld20.dtsi"
+/include/ "uniphier-ld20.dtsi"
 /include/ "uniphier-ref-daughter.dtsi"
 /include/ "uniphier-support-card.dtsi"
 
 / {
-	model = "UniPhier PH1-LD20 Reference Board";
-	compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index c223915..08fd7cf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -1,7 +1,8 @@
 /*
- * Device Tree Source for UniPhier PH1-LD20 SoC
+ * Device Tree Source for UniPhier LD20 SoC
  *
- * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2015-2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -45,7 +46,7 @@
 /memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
 
 / {
-	compatible = "socionext,ph1-ld20";
+	compatible = "socionext,uniphier-ld20";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&gic>;
@@ -113,26 +114,14 @@
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
-
-		uart_clk: uart_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <58820000>;
-		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 4>,
+			     <1 14 4>,
+			     <1 11 4>,
+			     <1 10 4>;
 	};
 
 	soc {
@@ -148,7 +137,7 @@
 			interrupts = <0 33 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 0>;
 		};
 
 		serial1: serial@54006900 {
@@ -158,7 +147,7 @@
 			interrupts = <0 35 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 1>;
 		};
 
 		serial2: serial@54006a00 {
@@ -168,7 +157,7 @@
 			interrupts = <0 37 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 2>;
 		};
 
 		serial3: serial@54006b00 {
@@ -178,7 +167,7 @@
 			interrupts = <0 177 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&uart_clk>;
+			clocks = <&peri_clk 3>;
 		};
 
 		i2c0: i2c@58780000 {
@@ -190,7 +179,7 @@
 			interrupts = <0 41 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -203,7 +192,7 @@
 			interrupts = <0 42 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -213,7 +202,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -226,7 +215,7 @@
 			interrupts = <0 44 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -239,7 +228,7 @@
 			interrupts = <0 45 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -249,7 +238,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -259,6 +248,8 @@
 			reg = <0x58c00000 0x400>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
 		smpctrl@59800000 {
@@ -266,12 +257,45 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld20-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld20-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 
 			pinctrl: pinctrl {
-				 compatible = "socionext,uniphier-ld20-pinctrl";
+				compatible = "socionext,uniphier-ld20-pinctrl";
 			};
 		};
 
@@ -283,6 +307,22 @@
 			#interrupt-cells = <3>;
 			interrupts = <1 9 4>;
 		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x4000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index acb0527..3580896 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -29,7 +29,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x0 0x40000000>;
+		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index e595f22..68a90833 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -14,7 +14,7 @@
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;
-	#size-cells = <1>;
+	#size-cells = <2>;
 
 	cpus {
 		#address-cells = <1>;
@@ -51,6 +51,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
 		interrupts = <0 143 4>,
 			     <0 144 4>,
 			     <0 145 4>,
@@ -65,25 +66,25 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-		interrupts = <1 13 0xf01>,
-			     <1 14 0xf01>,
-			     <1 11 0xf01>,
-			     <1 10 0xf01>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
 	};
 
 	amba_apu {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0 0 0 0 0xffffffff>;
 
 		gic: interrupt-controller@f9010000 {
 			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			reg = <0x0 0xf9010000 0x10000>,
-			      <0x0 0xf902f000 0x2000>,
+			      <0x0 0xf9020000 0x20000>,
 			      <0x0 0xf9040000 0x20000>,
-			      <0x0 0xf906f000 0x2000>;
+			      <0x0 0xf9060000 0x20000>;
 			interrupt-controller;
 			interrupt-parent = <&gic>;
 			interrupts = <1 9 0xf04>;
@@ -93,14 +94,14 @@
 	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-		#size-cells = <1>;
+		#size-cells = <2>;
 		ranges;
 
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff060000 0x1000>;
+			reg = <0x0 0xff060000 0x0 0x1000>;
 			interrupts = <0 23 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -111,7 +112,7 @@
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
-			reg = <0x0 0xff070000 0x1000>;
+			reg = <0x0 0xff070000 0x0 0x1000>;
 			interrupts = <0 24 4>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
@@ -123,7 +124,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 57 4>, <0 57 4>;
-			reg = <0x0 0xff0b0000 0x1000>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,7 +135,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 59 4>, <0 59 4>;
-			reg = <0x0 0xff0c0000 0x1000>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,7 +146,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 61 4>, <0 61 4>;
-			reg = <0x0 0xff0d0000 0x1000>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -156,7 +157,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 63 4>, <0 63 4>;
-			reg = <0x0 0xff0e0000 0x1000>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -170,7 +171,7 @@
 			interrupts = <0 16 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0x0 0xff0a0000 0x1000>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -178,7 +179,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
-			reg = <0x0 0xff020000 0x1000>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -188,15 +189,54 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
-			reg = <0x0 0xff030000 0x1000>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		pcie: pcie@fd0e0000 {
+			compatible = "xlnx,nwl-pcie-2.11";
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-controller;
+			device_type = "pci";
+			interrupt-parent = <&gic>;
+			interrupts = <0 118 4>,
+				    <0 117 4>,
+				    <0 116 4>,
+				    <0 115 4>,	/* MSI_1 [63...32] */
+				    <0 114 4>;	/* MSI_0 [31...0] */
+			interrupt-names = "misc", "dummy", "intx",
+					  "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
+			reg-names = "breg", "pcireg", "cfg";
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000
+				  0xe0000000 0x00000000 0x10000000
+				  /* non-prefetchable memory */
+				  0x43000000 0x00000006 0x00000000 0x00000006
+				  0x00000000 0x00000002 0x00000000>;
+				  /* prefetchable memory */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
-			reg = <0x0 0xfd0c0000 0x2000>;
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
 		};
@@ -206,7 +246,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 48 4>;
-			reg = <0x0 0xff160000 0x1000>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -215,13 +255,13 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 49 4>;
-			reg = <0x0 0xff170000 0x1000>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
 		smmu: smmu@fd800000 {
 			compatible = "arm,mmu-500";
-			reg = <0x0 0xfd800000 0x20000>;
+			reg = <0x0 0xfd800000 0x0 0x20000>;
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 157 4>,
@@ -236,7 +276,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 19 4>;
-			reg = <0x0 0xff040000 0x1000>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -247,7 +287,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 20 4>;
-			reg = <0x0 0xff050000 0x1000>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -258,7 +298,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
-			reg = <0x0 0xff110000 0x1000>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -267,7 +307,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
-			reg = <0x0 0xff120000 0x1000>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -276,7 +316,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
-			reg = <0x0 0xff130000 0x1000>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -285,7 +325,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
-			reg = <0x0 0xff140000 0x1000>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
 		};
 
@@ -294,7 +334,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 21 4>;
-			reg = <0x0 0xff000000 0x1000>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 		};
 
@@ -303,7 +343,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 22 4>;
-			reg = <0x0 0xff010000 0x1000>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 		};
 
@@ -312,7 +352,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 65 4>;
-			reg = <0x0 0xfe200000 0x40000>;
+			reg = <0x0 0xfe200000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -321,7 +361,7 @@
 			status = "disabled";
 			interrupt-parent = <&gic>;
 			interrupts = <0 70 4>;
-			reg = <0x0 0xfe300000 0x40000>;
+			reg = <0x0 0xfe300000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 		};
 
@@ -329,8 +369,8 @@
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 52 1>;
-			reg = <0x0 0xfd4d0000 0x1000>;
+			interrupts = <0 113 1>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
 			timeout-sec = <10>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile
new file mode 100644
index 0000000..6678066
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts
new file mode 100644
index 0000000..e164ff6
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 ZTE Corporation.
+ * Copyright 2016 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "zx296718.dtsi"
+
+/ {
+	model = "ZTE zx296718 evaluation board";
+	compatible = "zte,zx296718-evb", "zte,zx296718";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
new file mode 100644
index 0000000..a223066
--- /dev/null
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -0,0 +1,292 @@
+/*
+ * Copyright 2016 ZTE Corporation.
+ * Copyright 2016 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "zte,zx296718";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	clk24k: clk-24k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000>;
+		clock-output-names = "rtcclk";
+	};
+
+	osc32k: clk-osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "osc32k";
+	};
+
+	osc12m: clk-osc12m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+		clock-output-names = "osc12m";
+	};
+
+	osc24m: clk-osc24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24m";
+	};
+
+	osc25m: clk-osc25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc25m";
+	};
+
+	osc60m: clk-osc60m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <60000000>;
+		clock-output-names = "osc60m";
+	};
+
+	osc99m: clk-osc99m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <99000000>;
+		clock-output-names = "osc99m";
+	};
+
+	osc125m: clk-osc125m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "osc125m";
+	};
+
+	osc198m: clk-osc198m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <198000000>;
+		clock-output-names = "osc198m";
+	};
+
+	pll_audio: clk-pll-884m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <884000000>;
+		clock-output-names = "pll_audio";
+	};
+
+	pll_ddr: clk-pll-932m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <932000000>;
+		clock-output-names = "pll_ddr";
+	};
+
+	pll_hsic: clk-pll-960m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <960000000>;
+		clock-output-names = "pll_hsic";
+	};
+
+	pll_mac: clk-pll-1000m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+		clock-output-names = "pll_mac";
+	};
+
+	pll_vga: clk-pll-1073m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1073000000>;
+		clock-output-names = "pll_vga";
+	};
+
+	pll_mm0: clk-pll-1188m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1188000000>;
+		clock-output-names = "pll_mm0";
+	};
+
+	pll_mm1: clk-pll-1296m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1296000000>;
+		clock-output-names = "pll_mm1";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@2a00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		#redistributor-regions = <6>;
+		redistributor-stride = <0x0 0x40000>;
+		interrupt-controller;
+		reg = <0x02a00000 0x10000>,
+		      <0x02b00000 0x20000>,
+		      <0x02b20000 0x20000>,
+		      <0x02b40000 0x20000>,
+		      <0x02b60000 0x20000>,
+		      <0x02b80000 0x20000>,
+		      <0x02ba0000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aon_sysctrl: aon-sysctrl@116000 {
+			compatible = "zte,zx296718-aon-sysctrl", "syscon";
+			reg = <0x116000 0x1000>;
+		};
+
+		uart0: uart@11f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			arm,primecell-periphid = <0x001feffe>;
+			reg = <0x11f000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dma: dma-controller@1460000 {
+			compatible = "zte,zx296702-dma";
+			reg = <0x01460000 0x1000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24m>;
+			clock-names = "dmaclk";
+			#dma-cells = <1>;
+			dma-channels = <32>;
+			dma-requests = <32>;
+		};
+
+		sysctrl: sysctrl@1463000 {
+			compatible = "zte,zx296718-sysctrl", "syscon";
+			reg = <0x1463000 0x1000>;
+		};
+	};
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index eadf485..dab2cb0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -57,10 +57,12 @@ CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_VULCAN=y
 CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCI_IOV=y
+CONFIG_PCI_AARDVARK=y
 CONFIG_PCIE_RCAR=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
@@ -82,6 +84,7 @@ CONFIG_COMPAT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_CPU_FREQ=y
+CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
 CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_NET=y
@@ -120,6 +123,14 @@ CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
 CONFIG_BPF_JIT=y
+CONFIG_BT=m
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_DEBUGFS is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_LL=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
@@ -139,7 +150,8 @@ CONFIG_VIRTIO_BLK=y
 CONFIG_SRAM=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -160,6 +172,8 @@ CONFIG_VIRTIO_NET=y
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_MACB=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IGBVF=y
@@ -186,6 +200,7 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_HISI_POWERKEY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_LEGACY_PTY_COUNT=16
@@ -211,12 +226,12 @@ CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_VIRTIO_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_QUP=y
 CONFIG_I2C_TEGRA=y
@@ -224,6 +239,7 @@ CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
+CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
@@ -234,6 +250,7 @@ CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_MSM8916=y
 CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
@@ -252,10 +269,14 @@ CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
 CONFIG_S3C2410_WATCHDOG=y
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
 CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
@@ -264,6 +285,7 @@ CONFIG_REGULATOR=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_PWM=y
@@ -274,6 +296,8 @@ CONFIG_DRM=m
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_HISI_KIRIN=m
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_BACKLIGHT_GENERIC=m
@@ -291,6 +315,7 @@ CONFIG_SND_SOC_AK4613=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USB_XHCI_RCAR=y
 CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_XHCI_TEGRA=y
@@ -300,6 +325,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC2=y
 CONFIG_USB_DWC3=y
@@ -311,15 +337,18 @@ CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_MSM_OTG=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_MMC_DW_K3=y
@@ -345,6 +374,8 @@ CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
 CONFIG_RCAR_DMAC=y
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
index 5c88804..6b2aa0f 100644
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -216,7 +216,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index f43d2c4..44e1d7f 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -1,4 +1,3 @@
-generic-y += bug.h
 generic-y += bugs.h
 generic-y += clkdev.h
 generic-y += cputime.h
@@ -10,7 +9,6 @@ generic-y += dma-contiguous.h
 generic-y += early_ioremap.h
 generic-y += emergency-restart.h
 generic-y += errno.h
-generic-y += ftrace.h
 generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ioctls.h
@@ -27,12 +25,10 @@ generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += msi.h
 generic-y += mutex.h
-generic-y += pci.h
 generic-y += poll.h
 generic-y += preempt.h
 generic-y += resource.h
 generic-y += rwsem.h
-generic-y += sections.h
 generic-y += segment.h
 generic-y += sembuf.h
 generic-y += serial.h
@@ -45,7 +41,6 @@ generic-y += swab.h
 generic-y += switch_to.h
 generic-y += termbits.h
 generic-y += termios.h
-generic-y += topology.h
 generic-y += trace_clock.h
 generic-y += types.h
 generic-y += unaligned.h
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 5420cb0..e517088 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -12,7 +12,7 @@
 #ifndef _ASM_ACPI_H
 #define _ASM_ACPI_H
 
-#include <linux/mm.h>
+#include <linux/memblock.h>
 #include <linux/psci.h>
 
 #include <asm/cputype.h>
@@ -32,7 +32,11 @@
 static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys,
 					    acpi_size size)
 {
-	if (!page_is_ram(phys >> PAGE_SHIFT))
+	/*
+	 * EFI's reserve_regions() call adds memory with the WB attribute
+	 * to memblock via early_init_dt_add_memory_arch().
+	 */
+	if (!memblock_is_memory(phys))
 		return ioremap(phys, size);
 
 	return ioremap_cache(phys, size);
diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h
index 8746ff6..39feb85 100644
--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -2,11 +2,11 @@
 #define __ASM_ALTERNATIVE_H
 
 #include <asm/cpufeature.h>
+#include <asm/insn.h>
 
 #ifndef __ASSEMBLY__
 
 #include <linux/init.h>
-#include <linux/kconfig.h>
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/stringify.h>
@@ -90,34 +90,55 @@ void apply_alternatives(void *start, size_t length);
 .endm
 
 /*
- * Begin an alternative code sequence.
+ * Alternative sequences
+ *
+ * The code for the case where the capability is not present will be
+ * assembled and linked as normal. There are no restrictions on this
+ * code.
+ *
+ * The code for the case where the capability is present will be
+ * assembled into a special section to be used for dynamic patching.
+ * Code for that case must:
+ *
+ * 1. Be exactly the same length (in bytes) as the default code
+ *    sequence.
  *
- * The code that follows this macro will be assembled and linked as
- * normal. There are no restrictions on this code.
+ * 2. Not contain a branch target that is used outside of the
+ *    alternative sequence it is defined in (branches into an
+ *    alternative sequence are not fixed up).
+ */
+
+/*
+ * Begin an alternative code sequence.
  */
 .macro alternative_if_not cap
+	.set .Lasm_alt_mode, 0
 	.pushsection .altinstructions, "a"
 	altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f
 	.popsection
 661:
 .endm
 
+.macro alternative_if cap
+	.set .Lasm_alt_mode, 1
+	.pushsection .altinstructions, "a"
+	altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f
+	.popsection
+	.pushsection .altinstr_replacement, "ax"
+	.align 2	/* So GAS knows label 661 is suitably aligned */
+661:
+.endm
+
 /*
- * Provide the alternative code sequence.
- *
- * The code that follows this macro is assembled into a special
- * section to be used for dynamic patching. Code that follows this
- * macro must:
- *
- * 1. Be exactly the same length (in bytes) as the default code
- *    sequence.
- *
- * 2. Not contain a branch target that is used outside of the
- *    alternative sequence it is defined in (branches into an
- *    alternative sequence are not fixed up).
+ * Provide the other half of the alternative code sequence.
  */
 .macro alternative_else
-662:	.pushsection .altinstr_replacement, "ax"
+662:
+	.if .Lasm_alt_mode==0
+	.pushsection .altinstr_replacement, "ax"
+	.else
+	.popsection
+	.endif
 663:
 .endm
 
@@ -125,11 +146,25 @@ void apply_alternatives(void *start, size_t length);
  * Complete an alternative code sequence.
  */
 .macro alternative_endif
-664:	.popsection
+664:
+	.if .Lasm_alt_mode==0
+	.popsection
+	.endif
 	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
 .endm
 
+/*
+ * Provides a trivial alternative or default sequence consisting solely
+ * of NOPs. The number of NOPs is chosen automatically to match the
+ * previous case.
+ */
+.macro alternative_else_nop_endif
+alternative_else
+	nops	(662b-661b) / AARCH64_INSN_SIZE
+alternative_endif
+.endm
+
 #define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...)	\
 	alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
 
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 8ec88e5..f8ae6d6 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -28,6 +28,7 @@
 #define ICC_CTLR_EL1			sys_reg(3, 0, 12, 12, 4)
 #define ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
 #define ICC_GRPEN1_EL1			sys_reg(3, 0, 12, 12, 7)
+#define ICC_BPR1_EL1			sys_reg(3, 0, 12, 12, 3)
 
 #define ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
 
@@ -79,6 +80,19 @@
 #include <linux/stringify.h>
 #include <asm/barrier.h>
 
+#define read_gicreg(r)							\
+	({								\
+		u64 reg;						\
+		asm volatile("mrs_s %0, " __stringify(r) : "=r" (reg));	\
+		reg;							\
+	})
+
+#define write_gicreg(v,r)						\
+	do {								\
+		u64 __val = (v);					\
+		asm volatile("msr_s " __stringify(r) ", %0" : : "r" (__val));\
+	} while (0)
+
 /*
  * Low-level accessors
  *
@@ -165,6 +179,11 @@ static inline void gic_write_sre(u32 val)
 	isb();
 }
 
+static inline void gic_write_bpr1(u32 val)
+{
+	asm volatile("msr_s " __stringify(ICC_BPR1_EL1) ", %0" : : "r" (val));
+}
+
 #define gic_read_typer(c)		readq_relaxed(c)
 #define gic_write_irouter(v, c)		writeq_relaxed(v, c)
 
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index fbe0ca3..eaa5bbe 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -20,13 +20,55 @@
 #define __ASM_ARCH_TIMER_H
 
 #include <asm/barrier.h>
+#include <asm/sysreg.h>
 
 #include <linux/bug.h>
 #include <linux/init.h>
+#include <linux/jump_label.h>
 #include <linux/types.h>
 
 #include <clocksource/arm_arch_timer.h>
 
+#if IS_ENABLED(CONFIG_FSL_ERRATUM_A008585)
+extern struct static_key_false arch_timer_read_ool_enabled;
+#define needs_fsl_a008585_workaround() \
+	static_branch_unlikely(&arch_timer_read_ool_enabled)
+#else
+#define needs_fsl_a008585_workaround()  false
+#endif
+
+u32 __fsl_a008585_read_cntp_tval_el0(void);
+u32 __fsl_a008585_read_cntv_tval_el0(void);
+u64 __fsl_a008585_read_cntvct_el0(void);
+
+/*
+ * The number of retries is an arbitrary value well beyond the highest number
+ * of iterations the loop has been observed to take.
+ */
+#define __fsl_a008585_read_reg(reg) ({			\
+	u64 _old, _new;					\
+	int _retries = 200;				\
+							\
+	do {						\
+		_old = read_sysreg(reg);		\
+		_new = read_sysreg(reg);		\
+		_retries--;				\
+	} while (unlikely(_old != _new) && _retries);	\
+							\
+	WARN_ON_ONCE(!_retries);			\
+	_new;						\
+})
+
+#define arch_timer_reg_read_stable(reg) 		\
+({							\
+	u64 _val;					\
+	if (needs_fsl_a008585_workaround())		\
+		_val = __fsl_a008585_read_##reg();	\
+	else						\
+		_val = read_sysreg(reg);		\
+	_val;						\
+})
+
 /*
  * These register accessors are marked inline so the compiler can
  * nicely work out which register we want, and chuck away the rest of
@@ -38,19 +80,19 @@ void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
 	if (access == ARCH_TIMER_PHYS_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
-			asm volatile("msr cntp_ctl_el0,  %0" : : "r" (val));
+			write_sysreg(val, cntp_ctl_el0);
 			break;
 		case ARCH_TIMER_REG_TVAL:
-			asm volatile("msr cntp_tval_el0, %0" : : "r" (val));
+			write_sysreg(val, cntp_tval_el0);
 			break;
 		}
 	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
-			asm volatile("msr cntv_ctl_el0,  %0" : : "r" (val));
+			write_sysreg(val, cntv_ctl_el0);
 			break;
 		case ARCH_TIMER_REG_TVAL:
-			asm volatile("msr cntv_tval_el0, %0" : : "r" (val));
+			write_sysreg(val, cntv_tval_el0);
 			break;
 		}
 	}
@@ -61,48 +103,38 @@ void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val)
 static __always_inline
 u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
 {
-	u32 val;
-
 	if (access == ARCH_TIMER_PHYS_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
-			asm volatile("mrs %0,  cntp_ctl_el0" : "=r" (val));
-			break;
+			return read_sysreg(cntp_ctl_el0);
 		case ARCH_TIMER_REG_TVAL:
-			asm volatile("mrs %0, cntp_tval_el0" : "=r" (val));
-			break;
+			return arch_timer_reg_read_stable(cntp_tval_el0);
 		}
 	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
 		switch (reg) {
 		case ARCH_TIMER_REG_CTRL:
-			asm volatile("mrs %0,  cntv_ctl_el0" : "=r" (val));
-			break;
+			return read_sysreg(cntv_ctl_el0);
 		case ARCH_TIMER_REG_TVAL:
-			asm volatile("mrs %0, cntv_tval_el0" : "=r" (val));
-			break;
+			return arch_timer_reg_read_stable(cntv_tval_el0);
 		}
 	}
 
-	return val;
+	BUG();
 }
 
 static inline u32 arch_timer_get_cntfrq(void)
 {
-	u32 val;
-	asm volatile("mrs %0,   cntfrq_el0" : "=r" (val));
-	return val;
+	return read_sysreg(cntfrq_el0);
 }
 
 static inline u32 arch_timer_get_cntkctl(void)
 {
-	u32 cntkctl;
-	asm volatile("mrs	%0, cntkctl_el1" : "=r" (cntkctl));
-	return cntkctl;
+	return read_sysreg(cntkctl_el1);
 }
 
 static inline void arch_timer_set_cntkctl(u32 cntkctl)
 {
-	asm volatile("msr	cntkctl_el1, %0" : : "r" (cntkctl));
+	write_sysreg(cntkctl, cntkctl_el1);
 }
 
 static inline u64 arch_counter_get_cntpct(void)
@@ -116,12 +148,8 @@ static inline u64 arch_counter_get_cntpct(void)
 
 static inline u64 arch_counter_get_cntvct(void)
 {
-	u64 cval;
-
 	isb();
-	asm volatile("mrs %0, cntvct_el0" : "=r" (cval));
-
-	return cval;
+	return arch_timer_reg_read_stable(cntvct_el0);
 }
 
 static inline int arch_timer_arch_init(void)
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index d5025c6..28bfe61 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -87,6 +87,15 @@
 	.endm
 
 /*
+ * NOP sequence
+ */
+	.macro	nops, num
+	.rept	\num
+	nop
+	.endr
+	.endm
+
+/*
  * Emit an entry into the exception table
  */
 	.macro		_asm_extable, from, to
@@ -216,11 +225,26 @@ lr	.req	x30		// link register
 	.macro	mmid, rd, rn
 	ldr	\rd, [\rn, #MM_CONTEXT_ID]
 	.endm
+/*
+ * read_ctr - read CTR_EL0. If the system has mismatched
+ * cache line sizes, provide the system wide safe value
+ * from arm64_ftr_reg_ctrel0.sys_val
+ */
+	.macro	read_ctr, reg
+alternative_if_not ARM64_MISMATCHED_CACHE_LINE_SIZE
+	mrs	\reg, ctr_el0			// read CTR
+	nop
+alternative_else
+	ldr_l	\reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL
+alternative_endif
+	.endm
+
 
 /*
- * dcache_line_size - get the minimum D-cache line size from the CTR register.
+ * raw_dcache_line_size - get the minimum D-cache line size on this CPU
+ * from the CTR register.
  */
-	.macro	dcache_line_size, reg, tmp
+	.macro	raw_dcache_line_size, reg, tmp
 	mrs	\tmp, ctr_el0			// read CTR
 	ubfm	\tmp, \tmp, #16, #19		// cache line size encoding
 	mov	\reg, #4			// bytes per word
@@ -228,9 +252,20 @@ lr	.req	x30		// link register
 	.endm
 
 /*
- * icache_line_size - get the minimum I-cache line size from the CTR register.
+ * dcache_line_size - get the safe D-cache line size across all CPUs
  */
-	.macro	icache_line_size, reg, tmp
+	.macro	dcache_line_size, reg, tmp
+	read_ctr	\tmp
+	ubfm		\tmp, \tmp, #16, #19	// cache line size encoding
+	mov		\reg, #4		// bytes per word
+	lsl		\reg, \reg, \tmp	// actual cache line size
+	.endm
+
+/*
+ * raw_icache_line_size - get the minimum I-cache line size on this CPU
+ * from the CTR register.
+ */
+	.macro	raw_icache_line_size, reg, tmp
 	mrs	\tmp, ctr_el0			// read CTR
 	and	\tmp, \tmp, #0xf		// cache line size encoding
 	mov	\reg, #4			// bytes per word
@@ -238,6 +273,16 @@ lr	.req	x30		// link register
 	.endm
 
 /*
+ * icache_line_size - get the safe I-cache line size across all CPUs
+ */
+	.macro	icache_line_size, reg, tmp
+	read_ctr	\tmp
+	and		\tmp, \tmp, #0xf	// cache line size encoding
+	mov		\reg, #4		// bytes per word
+	lsl		\reg, \reg, \tmp	// actual cache line size
+	.endm
+
+/*
  * tcr_set_idmap_t0sz - update TCR.T0SZ so that we can load the ID map
  */
 	.macro	tcr_set_idmap_t0sz, valreg, tmpreg
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index b5890be..7457ce0 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -86,8 +86,8 @@ static inline int atomic_add_return##name(int i, atomic_t *v)		\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	__LL_SC_ATOMIC(add_return##name),				\
+	__LL_SC_ATOMIC(add_return##name)				\
+	__nops(1),							\
 	/* LSE atomics */						\
 	"	ldadd" #mb "	%w[i], w30, %[v]\n"			\
 	"	add	%w[i], %w[i], w30")				\
@@ -112,8 +112,8 @@ static inline void atomic_and(int i, atomic_t *v)
 
 	asm volatile(ARM64_LSE_ATOMIC_INSN(
 	/* LL/SC */
-	"	nop\n"
-	__LL_SC_ATOMIC(and),
+	__LL_SC_ATOMIC(and)
+	__nops(1),
 	/* LSE atomics */
 	"	mvn	%w[i], %w[i]\n"
 	"	stclr	%w[i], %[v]")
@@ -130,8 +130,8 @@ static inline int atomic_fetch_and##name(int i, atomic_t *v)		\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	__LL_SC_ATOMIC(fetch_and##name),				\
+	__LL_SC_ATOMIC(fetch_and##name)					\
+	__nops(1),							\
 	/* LSE atomics */						\
 	"	mvn	%w[i], %w[i]\n"					\
 	"	ldclr" #mb "	%w[i], %w[i], %[v]")			\
@@ -156,8 +156,8 @@ static inline void atomic_sub(int i, atomic_t *v)
 
 	asm volatile(ARM64_LSE_ATOMIC_INSN(
 	/* LL/SC */
-	"	nop\n"
-	__LL_SC_ATOMIC(sub),
+	__LL_SC_ATOMIC(sub)
+	__nops(1),
 	/* LSE atomics */
 	"	neg	%w[i], %w[i]\n"
 	"	stadd	%w[i], %[v]")
@@ -174,9 +174,8 @@ static inline int atomic_sub_return##name(int i, atomic_t *v)		\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
 	__LL_SC_ATOMIC(sub_return##name)				\
-	"	nop",							\
+	__nops(2),							\
 	/* LSE atomics */						\
 	"	neg	%w[i], %w[i]\n"					\
 	"	ldadd" #mb "	%w[i], w30, %[v]\n"			\
@@ -203,8 +202,8 @@ static inline int atomic_fetch_sub##name(int i, atomic_t *v)		\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	__LL_SC_ATOMIC(fetch_sub##name),				\
+	__LL_SC_ATOMIC(fetch_sub##name)					\
+	__nops(1),							\
 	/* LSE atomics */						\
 	"	neg	%w[i], %w[i]\n"					\
 	"	ldadd" #mb "	%w[i], %w[i], %[v]")			\
@@ -284,8 +283,8 @@ static inline long atomic64_add_return##name(long i, atomic64_t *v)	\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	__LL_SC_ATOMIC64(add_return##name),				\
+	__LL_SC_ATOMIC64(add_return##name)				\
+	__nops(1),							\
 	/* LSE atomics */						\
 	"	ldadd" #mb "	%[i], x30, %[v]\n"			\
 	"	add	%[i], %[i], x30")				\
@@ -310,8 +309,8 @@ static inline void atomic64_and(long i, atomic64_t *v)
 
 	asm volatile(ARM64_LSE_ATOMIC_INSN(
 	/* LL/SC */
-	"	nop\n"
-	__LL_SC_ATOMIC64(and),
+	__LL_SC_ATOMIC64(and)
+	__nops(1),
 	/* LSE atomics */
 	"	mvn	%[i], %[i]\n"
 	"	stclr	%[i], %[v]")
@@ -328,8 +327,8 @@ static inline long atomic64_fetch_and##name(long i, atomic64_t *v)	\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	__LL_SC_ATOMIC64(fetch_and##name),				\
+	__LL_SC_ATOMIC64(fetch_and##name)				\
+	__nops(1),							\
 	/* LSE atomics */						\
 	"	mvn	%[i], %[i]\n"					\
 	"	ldclr" #mb "	%[i], %[i], %[v]")			\
@@ -354,8 +353,8 @@ static inline void atomic64_sub(long i, atomic64_t *v)
 
 	asm volatile(ARM64_LSE_ATOMIC_INSN(
 	/* LL/SC */
-	"	nop\n"
-	__LL_SC_ATOMIC64(sub),
+	__LL_SC_ATOMIC64(sub)
+	__nops(1),
 	/* LSE atomics */
 	"	neg	%[i], %[i]\n"
 	"	stadd	%[i], %[v]")
@@ -372,9 +371,8 @@ static inline long atomic64_sub_return##name(long i, atomic64_t *v)	\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
 	__LL_SC_ATOMIC64(sub_return##name)				\
-	"	nop",							\
+	__nops(2),							\
 	/* LSE atomics */						\
 	"	neg	%[i], %[i]\n"					\
 	"	ldadd" #mb "	%[i], x30, %[v]\n"			\
@@ -401,8 +399,8 @@ static inline long atomic64_fetch_sub##name(long i, atomic64_t *v)	\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	__LL_SC_ATOMIC64(fetch_sub##name),				\
+	__LL_SC_ATOMIC64(fetch_sub##name)				\
+	__nops(1),							\
 	/* LSE atomics */						\
 	"	neg	%[i], %[i]\n"					\
 	"	ldadd" #mb "	%[i], %[i], %[v]")			\
@@ -426,13 +424,8 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
 
 	asm volatile(ARM64_LSE_ATOMIC_INSN(
 	/* LL/SC */
-	"	nop\n"
 	__LL_SC_ATOMIC64(dec_if_positive)
-	"	nop\n"
-	"	nop\n"
-	"	nop\n"
-	"	nop\n"
-	"	nop",
+	__nops(6),
 	/* LSE atomics */
 	"1:	ldr	x30, %[v]\n"
 	"	subs	%[ret], x30, #1\n"
@@ -464,9 +457,8 @@ static inline unsigned long __cmpxchg_case_##name(volatile void *ptr,	\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-		__LL_SC_CMPXCHG(name)					\
-	"	nop",							\
+	__LL_SC_CMPXCHG(name)						\
+	__nops(2),							\
 	/* LSE atomics */						\
 	"	mov	" #w "30, %" #w "[old]\n"			\
 	"	cas" #mb #sz "\t" #w "30, %" #w "[new], %[v]\n"		\
@@ -517,10 +509,8 @@ static inline long __cmpxchg_double##name(unsigned long old1,		\
 									\
 	asm volatile(ARM64_LSE_ATOMIC_INSN(				\
 	/* LL/SC */							\
-	"	nop\n"							\
-	"	nop\n"							\
-	"	nop\n"							\
-	__LL_SC_CMPXCHG_DBL(name),					\
+	__LL_SC_CMPXCHG_DBL(name)					\
+	__nops(3),							\
 	/* LSE atomics */						\
 	"	casp" #mb "\t%[old1], %[old2], %[new1], %[new2], %[v]\n"\
 	"	eor	%[old1], %[old1], %[oldval1]\n"			\
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index 4eea7f6..4e0497f 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -20,6 +20,9 @@
 
 #ifndef __ASSEMBLY__
 
+#define __nops(n)	".rept	" #n "\nnop\n.endr\n"
+#define nops(n)		asm volatile(__nops(n))
+
 #define sev()		asm volatile("sev" : : : "memory")
 #define wfe()		asm volatile("wfe" : : : "memory")
 #define wfi()		asm volatile("wfi" : : : "memory")
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index c64268d..2e5fb97 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -68,6 +68,7 @@
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void __flush_dcache_area(void *addr, size_t len);
+extern void __clean_dcache_area_poc(void *addr, size_t len);
 extern void __clean_dcache_area_pou(void *addr, size_t len);
 extern long __flush_cache_user_range(unsigned long start, unsigned long end);
 
@@ -85,7 +86,7 @@ static inline void flush_cache_page(struct vm_area_struct *vma,
  */
 extern void __dma_map_area(const void *, size_t, int);
 extern void __dma_unmap_area(const void *, size_t, int);
-extern void __dma_flush_range(const void *, const void *);
+extern void __dma_flush_area(const void *, size_t);
 
 /*
  * Copy user data from/to a page which is mapped into a different
diff --git a/arch/arm64/include/asm/clocksource.h b/arch/arm64/include/asm/clocksource.h
new file mode 100644
index 0000000..0b350a7
--- /dev/null
+++ b/arch/arm64/include/asm/clocksource.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_CLOCKSOURCE_H
+#define _ASM_CLOCKSOURCE_H
+
+struct arch_clocksource_data {
+	bool vdso_direct;	/* Usable for direct VDSO access? */
+};
+
+#endif
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index bd86a79..91b26d2 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -43,10 +43,8 @@ static inline unsigned long __xchg_case_##name(unsigned long x,		\
 	"	cbnz	%w1, 1b\n"					\
 	"	" #mb,							\
 	/* LSE atomics */						\
-	"	nop\n"							\
-	"	nop\n"							\
 	"	swp" #acq_lse #rel #sz "\t%" #w "3, %" #w "0, %2\n"	\
-	"	nop\n"							\
+		__nops(3)						\
 	"	" #nop_lse)						\
 	: "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)			\
 	: "r" (x)							\
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 7099f26..758d74f 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_CPUFEATURE_H
 #define __ASM_CPUFEATURE_H
 
+#include <linux/jump_label.h>
+
 #include <asm/hwcap.h>
 #include <asm/sysreg.h>
 
@@ -37,8 +39,9 @@
 #define ARM64_WORKAROUND_CAVIUM_27456		12
 #define ARM64_HAS_32BIT_EL0			13
 #define ARM64_HYP_OFFSET_LOW			14
+#define ARM64_MISMATCHED_CACHE_LINE_SIZE	15
 
-#define ARM64_NCAPS				15
+#define ARM64_NCAPS				16
 
 #ifndef __ASSEMBLY__
 
@@ -63,7 +66,7 @@ struct arm64_ftr_bits {
 	enum ftr_type	type;
 	u8		shift;
 	u8		width;
-	s64		safe_val; /* safe value for discrete features */
+	s64		safe_val; /* safe value for FTR_EXACT features */
 };
 
 /*
@@ -72,13 +75,14 @@ struct arm64_ftr_bits {
  * @sys_val		Safe value across the CPUs (system view)
  */
 struct arm64_ftr_reg {
-	u32			sys_id;
-	const char		*name;
-	u64			strict_mask;
-	u64			sys_val;
-	struct arm64_ftr_bits	*ftr_bits;
+	const char			*name;
+	u64				strict_mask;
+	u64				sys_val;
+	const struct arm64_ftr_bits	*ftr_bits;
 };
 
+extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
+
 /* scope of capability check */
 enum {
 	SCOPE_SYSTEM,
@@ -109,6 +113,7 @@ struct arm64_cpu_capabilities {
 };
 
 extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
+extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS];
 
 bool this_cpu_has_cap(unsigned int cap);
 
@@ -121,16 +126,21 @@ static inline bool cpus_have_cap(unsigned int num)
 {
 	if (num >= ARM64_NCAPS)
 		return false;
-	return test_bit(num, cpu_hwcaps);
+	if (__builtin_constant_p(num))
+		return static_branch_unlikely(&cpu_hwcap_keys[num]);
+	else
+		return test_bit(num, cpu_hwcaps);
 }
 
 static inline void cpus_set_cap(unsigned int num)
 {
-	if (num >= ARM64_NCAPS)
+	if (num >= ARM64_NCAPS) {
 		pr_warn("Attempt to set an illegal CPU capability (%d >= %d)\n",
 			num, ARM64_NCAPS);
-	else
+	} else {
 		__set_bit(num, cpu_hwcaps);
+		static_branch_enable(&cpu_hwcap_keys[num]);
+	}
 }
 
 static inline int __attribute_const__
@@ -157,7 +167,7 @@ cpuid_feature_extract_unsigned_field(u64 features, int field)
 	return cpuid_feature_extract_unsigned_field_width(features, field, 4);
 }
 
-static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
+static inline u64 arm64_ftr_mask(const struct arm64_ftr_bits *ftrp)
 {
 	return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
 }
@@ -170,7 +180,7 @@ cpuid_feature_extract_field(u64 features, int field, bool sign)
 		cpuid_feature_extract_unsigned_field(features, field);
 }
 
-static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val)
+static inline s64 arm64_ftr_value(const struct arm64_ftr_bits *ftrp, u64 val)
 {
 	return (s64)cpuid_feature_extract_field(val, ftrp->shift, ftrp->sign);
 }
@@ -193,11 +203,11 @@ void __init setup_cpu_features(void);
 void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
 			    const char *info);
 void enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps);
-void check_local_cpu_errata(void);
-void __init enable_errata_workarounds(void);
+void check_local_cpu_capabilities(void);
 
-void verify_local_cpu_errata(void);
-void verify_local_cpu_capabilities(void);
+void update_cpu_errata_workarounds(void);
+void __init enable_errata_workarounds(void);
+void verify_local_cpu_errata_workarounds(void);
 
 u64 read_system_reg(u32 id);
 
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 9d9fd4b..26a68dd 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -93,11 +93,7 @@
 
 #include <asm/sysreg.h>
 
-#define read_cpuid(reg) ({						\
-	u64 __val;							\
-	asm("mrs_s	%0, " __stringify(SYS_ ## reg) : "=r" (__val));	\
-	__val;								\
-})
+#define read_cpuid(reg)			read_sysreg_s(SYS_ ## reg)
 
 /*
  * The CPU ID never changes at run time, so we might as well tell the
diff --git a/arch/arm64/include/asm/dcc.h b/arch/arm64/include/asm/dcc.h
index 65e0190..836b056 100644
--- a/arch/arm64/include/asm/dcc.h
+++ b/arch/arm64/include/asm/dcc.h
@@ -21,21 +21,16 @@
 #define __ASM_DCC_H
 
 #include <asm/barrier.h>
+#include <asm/sysreg.h>
 
 static inline u32 __dcc_getstatus(void)
 {
-	u32 ret;
-
-	asm volatile("mrs %0, mdccsr_el0" : "=r" (ret));
-
-	return ret;
+	return read_sysreg(mdccsr_el0);
 }
 
 static inline char __dcc_getchar(void)
 {
-	char c;
-
-	asm volatile("mrs %0, dbgdtrrx_el0" : "=r" (c));
+	char c = read_sysreg(dbgdtrrx_el0);
 	isb();
 
 	return c;
@@ -47,8 +42,7 @@ static inline void __dcc_putchar(char c)
 	 * The typecast is to make absolutely certain that 'c' is
 	 * zero-extended.
 	 */
-	asm volatile("msr dbgdtrtx_el0, %0"
-			: : "r" ((unsigned long)(unsigned char)c));
+	write_sysreg((unsigned char)c, dbgdtrtx_el0);
 	isb();
 }
 
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 4b6b3f7..b71420a 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -61,8 +61,6 @@
 
 #define AARCH64_BREAK_KGDB_DYN_DBG	\
 	(AARCH64_BREAK_MON | (KGDB_DYN_DBG_BRK_IMM << 5))
-#define KGDB_DYN_BRK_INS_BYTE(x)	\
-	((AARCH64_BREAK_KGDB_DYN_DBG >> (8 * (x))) & 0xff)
 
 #define CACHE_FLUSH_IS_SAFE		1
 
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
index f772e15..d14c478 100644
--- a/arch/arm64/include/asm/esr.h
+++ b/arch/arm64/include/asm/esr.h
@@ -78,6 +78,23 @@
 
 #define ESR_ELx_IL		(UL(1) << 25)
 #define ESR_ELx_ISS_MASK	(ESR_ELx_IL - 1)
+
+/* ISS field definitions shared by different classes */
+#define ESR_ELx_WNR		(UL(1) << 6)
+
+/* Shared ISS field definitions for Data/Instruction aborts */
+#define ESR_ELx_EA		(UL(1) << 9)
+#define ESR_ELx_S1PTW		(UL(1) << 7)
+
+/* Shared ISS fault status code(IFSC/DFSC) for Data/Instruction aborts */
+#define ESR_ELx_FSC		(0x3F)
+#define ESR_ELx_FSC_TYPE	(0x3C)
+#define ESR_ELx_FSC_EXTABT	(0x10)
+#define ESR_ELx_FSC_ACCESS	(0x08)
+#define ESR_ELx_FSC_FAULT	(0x04)
+#define ESR_ELx_FSC_PERM	(0x0C)
+
+/* ISS field definitions for Data Aborts */
 #define ESR_ELx_ISV		(UL(1) << 24)
 #define ESR_ELx_SAS_SHIFT	(22)
 #define ESR_ELx_SAS		(UL(3) << ESR_ELx_SAS_SHIFT)
@@ -86,16 +103,9 @@
 #define ESR_ELx_SRT_MASK	(UL(0x1F) << ESR_ELx_SRT_SHIFT)
 #define ESR_ELx_SF 		(UL(1) << 15)
 #define ESR_ELx_AR 		(UL(1) << 14)
-#define ESR_ELx_EA 		(UL(1) << 9)
 #define ESR_ELx_CM 		(UL(1) << 8)
-#define ESR_ELx_S1PTW 		(UL(1) << 7)
-#define ESR_ELx_WNR		(UL(1) << 6)
-#define ESR_ELx_FSC		(0x3F)
-#define ESR_ELx_FSC_TYPE	(0x3C)
-#define ESR_ELx_FSC_EXTABT	(0x10)
-#define ESR_ELx_FSC_ACCESS	(0x08)
-#define ESR_ELx_FSC_FAULT	(0x04)
-#define ESR_ELx_FSC_PERM	(0x0C)
+
+/* ISS field definitions for exceptions taken in to Hyp */
 #define ESR_ELx_CV		(UL(1) << 24)
 #define ESR_ELx_COND_SHIFT	(20)
 #define ESR_ELx_COND_MASK	(UL(0xF) << ESR_ELx_COND_SHIFT)
@@ -109,6 +119,62 @@
 	((ESR_ELx_EC_BRK64 << ESR_ELx_EC_SHIFT) | ESR_ELx_IL |	\
 	 ((imm) & 0xffff))
 
+/* ISS field definitions for System instruction traps */
+#define ESR_ELx_SYS64_ISS_RES0_SHIFT	22
+#define ESR_ELx_SYS64_ISS_RES0_MASK	(UL(0x7) << ESR_ELx_SYS64_ISS_RES0_SHIFT)
+#define ESR_ELx_SYS64_ISS_DIR_MASK	0x1
+#define ESR_ELx_SYS64_ISS_DIR_READ	0x1
+#define ESR_ELx_SYS64_ISS_DIR_WRITE	0x0
+
+#define ESR_ELx_SYS64_ISS_RT_SHIFT	5
+#define ESR_ELx_SYS64_ISS_RT_MASK	(UL(0x1f) << ESR_ELx_SYS64_ISS_RT_SHIFT)
+#define ESR_ELx_SYS64_ISS_CRM_SHIFT	1
+#define ESR_ELx_SYS64_ISS_CRM_MASK	(UL(0xf) << ESR_ELx_SYS64_ISS_CRM_SHIFT)
+#define ESR_ELx_SYS64_ISS_CRN_SHIFT	10
+#define ESR_ELx_SYS64_ISS_CRN_MASK	(UL(0xf) << ESR_ELx_SYS64_ISS_CRN_SHIFT)
+#define ESR_ELx_SYS64_ISS_OP1_SHIFT	14
+#define ESR_ELx_SYS64_ISS_OP1_MASK	(UL(0x7) << ESR_ELx_SYS64_ISS_OP1_SHIFT)
+#define ESR_ELx_SYS64_ISS_OP2_SHIFT	17
+#define ESR_ELx_SYS64_ISS_OP2_MASK	(UL(0x7) << ESR_ELx_SYS64_ISS_OP2_SHIFT)
+#define ESR_ELx_SYS64_ISS_OP0_SHIFT	20
+#define ESR_ELx_SYS64_ISS_OP0_MASK	(UL(0x3) << ESR_ELx_SYS64_ISS_OP0_SHIFT)
+#define ESR_ELx_SYS64_ISS_SYS_MASK	(ESR_ELx_SYS64_ISS_OP0_MASK | \
+					 ESR_ELx_SYS64_ISS_OP1_MASK | \
+					 ESR_ELx_SYS64_ISS_OP2_MASK | \
+					 ESR_ELx_SYS64_ISS_CRN_MASK | \
+					 ESR_ELx_SYS64_ISS_CRM_MASK)
+#define ESR_ELx_SYS64_ISS_SYS_VAL(op0, op1, op2, crn, crm) \
+					(((op0) << ESR_ELx_SYS64_ISS_OP0_SHIFT) | \
+					 ((op1) << ESR_ELx_SYS64_ISS_OP1_SHIFT) | \
+					 ((op2) << ESR_ELx_SYS64_ISS_OP2_SHIFT) | \
+					 ((crn) << ESR_ELx_SYS64_ISS_CRN_SHIFT) | \
+					 ((crm) << ESR_ELx_SYS64_ISS_CRM_SHIFT))
+
+#define ESR_ELx_SYS64_ISS_SYS_OP_MASK	(ESR_ELx_SYS64_ISS_SYS_MASK | \
+					 ESR_ELx_SYS64_ISS_DIR_MASK)
+/*
+ * User space cache operations have the following sysreg encoding
+ * in System instructions.
+ * op0=1, op1=3, op2=1, crn=7, crm={ 5, 10, 11, 14 }, WRITE (L=0)
+ */
+#define ESR_ELx_SYS64_ISS_CRM_DC_CIVAC	14
+#define ESR_ELx_SYS64_ISS_CRM_DC_CVAU	11
+#define ESR_ELx_SYS64_ISS_CRM_DC_CVAC	10
+#define ESR_ELx_SYS64_ISS_CRM_IC_IVAU	5
+
+#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK	(ESR_ELx_SYS64_ISS_OP0_MASK | \
+						 ESR_ELx_SYS64_ISS_OP1_MASK | \
+						 ESR_ELx_SYS64_ISS_OP2_MASK | \
+						 ESR_ELx_SYS64_ISS_CRN_MASK | \
+						 ESR_ELx_SYS64_ISS_DIR_MASK)
+#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL \
+				(ESR_ELx_SYS64_ISS_SYS_VAL(1, 3, 1, 7, 0) | \
+				 ESR_ELx_SYS64_ISS_DIR_WRITE)
+
+#define ESR_ELx_SYS64_ISS_SYS_CTR	ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 1, 0, 0)
+#define ESR_ELx_SYS64_ISS_SYS_CTR_READ	(ESR_ELx_SYS64_ISS_SYS_CTR | \
+					 ESR_ELx_SYS64_ISS_DIR_READ)
+
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
index 115ea2a..9510ace 100644
--- a/arch/arm64/include/asm/hw_breakpoint.h
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -18,6 +18,7 @@
 
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
+#include <asm/sysreg.h>
 #include <asm/virt.h>
 
 #ifdef __KERNEL__
@@ -98,18 +99,18 @@ static inline void decode_ctrl_reg(u32 reg,
 #define AARCH64_DBG_REG_WCR	(AARCH64_DBG_REG_WVR + ARM_MAX_WRP)
 
 /* Debug register names. */
-#define AARCH64_DBG_REG_NAME_BVR	"bvr"
-#define AARCH64_DBG_REG_NAME_BCR	"bcr"
-#define AARCH64_DBG_REG_NAME_WVR	"wvr"
-#define AARCH64_DBG_REG_NAME_WCR	"wcr"
+#define AARCH64_DBG_REG_NAME_BVR	bvr
+#define AARCH64_DBG_REG_NAME_BCR	bcr
+#define AARCH64_DBG_REG_NAME_WVR	wvr
+#define AARCH64_DBG_REG_NAME_WCR	wcr
 
 /* Accessor macros for the debug registers. */
 #define AARCH64_DBG_READ(N, REG, VAL) do {\
-	asm volatile("mrs %0, dbg" REG #N "_el1" : "=r" (VAL));\
+	VAL = read_sysreg(dbg##REG##N##_el1);\
 } while (0)
 
 #define AARCH64_DBG_WRITE(N, REG, VAL) do {\
-	asm volatile("msr dbg" REG #N "_el1, %0" :: "r" (VAL));\
+	write_sysreg(VAL, dbg##REG##N##_el1);\
 } while (0)
 
 struct task_struct;
@@ -141,8 +142,6 @@ static inline void ptrace_hw_copy_thread(struct task_struct *task)
 }
 #endif
 
-extern struct pmu perf_ops_bp;
-
 /* Determine number of BRP registers available. */
 static inline int get_num_brps(void)
 {
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index 1dbaa90..bc85366 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -246,7 +246,8 @@ static __always_inline bool aarch64_insn_is_##abbr(u32 code) \
 static __always_inline u32 aarch64_insn_get_##abbr##_value(void) \
 { return (val); }
 
-__AARCH64_INSN_FUNCS(adr_adrp,	0x1F000000, 0x10000000)
+__AARCH64_INSN_FUNCS(adr,	0x9F000000, 0x10000000)
+__AARCH64_INSN_FUNCS(adrp,	0x9F000000, 0x90000000)
 __AARCH64_INSN_FUNCS(prfm_lit,	0xFF000000, 0xD8000000)
 __AARCH64_INSN_FUNCS(str_reg,	0x3FE0EC00, 0x38206800)
 __AARCH64_INSN_FUNCS(ldr_reg,	0x3FE0EC00, 0x38606800)
@@ -318,6 +319,11 @@ __AARCH64_INSN_FUNCS(msr_reg,	0xFFF00000, 0xD5100000)
 bool aarch64_insn_is_nop(u32 insn);
 bool aarch64_insn_is_branch_imm(u32 insn);
 
+static inline bool aarch64_insn_is_adr_adrp(u32 insn)
+{
+	return aarch64_insn_is_adr(insn) || aarch64_insn_is_adrp(insn);
+}
+
 int aarch64_insn_read(void *addr, u32 *insnp);
 int aarch64_insn_write(void *addr, u32 insn);
 enum aarch64_insn_encoding_class aarch64_get_insn_class(u32 insn);
@@ -398,6 +404,9 @@ int aarch64_insn_patch_text_nosync(void *addr, u32 insn);
 int aarch64_insn_patch_text_sync(void *addrs[], u32 insns[], int cnt);
 int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt);
 
+s32 aarch64_insn_adrp_get_offset(u32 insn);
+u32 aarch64_insn_adrp_set_offset(u32 insn, s32 offset);
+
 bool aarch32_insn_is_wide(u32 insn);
 
 #define A32_RN_OFFSET	16
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 9b6e408..0bba427 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -40,25 +40,25 @@
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
 {
-	asm volatile("strb %w0, [%1]" : : "r" (val), "r" (addr));
+	asm volatile("strb %w0, [%1]" : : "rZ" (val), "r" (addr));
 }
 
 #define __raw_writew __raw_writew
 static inline void __raw_writew(u16 val, volatile void __iomem *addr)
 {
-	asm volatile("strh %w0, [%1]" : : "r" (val), "r" (addr));
+	asm volatile("strh %w0, [%1]" : : "rZ" (val), "r" (addr));
 }
 
 #define __raw_writel __raw_writel
 static inline void __raw_writel(u32 val, volatile void __iomem *addr)
 {
-	asm volatile("str %w0, [%1]" : : "r" (val), "r" (addr));
+	asm volatile("str %w0, [%1]" : : "rZ" (val), "r" (addr));
 }
 
 #define __raw_writeq __raw_writeq
 static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
 {
-	asm volatile("str %0, [%1]" : : "r" (val), "r" (addr));
+	asm volatile("str %x0, [%1]" : : "rZ" (val), "r" (addr));
 }
 
 #define __raw_readb __raw_readb
@@ -184,17 +184,6 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size);
 #define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
 #define iowrite64be(v,p)	({ __iowmb(); __raw_writeq((__force __u64)cpu_to_be64(v), p); })
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
 #include <asm-generic/io.h>
 
 /*
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 4b5c977..2a2752b 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -50,7 +50,7 @@
 #define HCR_BSU		(3 << 10)
 #define HCR_BSU_IS	(UL(1) << 10)
 #define HCR_FB		(UL(1) << 9)
-#define HCR_VA		(UL(1) << 8)
+#define HCR_VSE		(UL(1) << 8)
 #define HCR_VI		(UL(1) << 7)
 #define HCR_VF		(UL(1) << 6)
 #define HCR_AMO		(UL(1) << 5)
@@ -80,7 +80,7 @@
 #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
 			 HCR_TVM | HCR_BSU_IS | HCR_FB | HCR_TAC | \
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW)
-#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
+#define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
 #define HCR_INT_OVERRIDE   (HCR_FMO | HCR_IMO)
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
 
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 7561f63..18f7465 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -20,10 +20,15 @@
 
 #include <asm/virt.h>
 
+#define ARM_EXIT_WITH_SERROR_BIT  31
+#define ARM_EXCEPTION_CODE(x)	  ((x) & ~(1U << ARM_EXIT_WITH_SERROR_BIT))
+#define ARM_SERROR_PENDING(x)	  !!((x) & (1U << ARM_EXIT_WITH_SERROR_BIT))
+
 #define ARM_EXCEPTION_IRQ	  0
-#define ARM_EXCEPTION_TRAP	  1
+#define ARM_EXCEPTION_EL1_SERROR  1
+#define ARM_EXCEPTION_TRAP	  2
 /* The hyp-stub will return this for any kvm_call_hyp() call */
-#define ARM_EXCEPTION_HYP_GONE	  2
+#define ARM_EXCEPTION_HYP_GONE	  3
 
 #define KVM_ARM64_DEBUG_DIRTY_SHIFT	0
 #define KVM_ARM64_DEBUG_DIRTY		(1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 4cdeae3..fd9d5fd 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -38,6 +38,7 @@ bool kvm_condition_valid32(const struct kvm_vcpu *vcpu);
 void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr);
 
 void kvm_inject_undefined(struct kvm_vcpu *vcpu);
+void kvm_inject_vabt(struct kvm_vcpu *vcpu);
 void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr);
 void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
 
@@ -147,6 +148,16 @@ static inline u32 kvm_vcpu_get_hsr(const struct kvm_vcpu *vcpu)
 	return vcpu->arch.fault.esr_el2;
 }
 
+static inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu)
+{
+	u32 esr = kvm_vcpu_get_hsr(vcpu);
+
+	if (esr & ESR_ELx_CV)
+		return (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT;
+
+	return -1;
+}
+
 static inline unsigned long kvm_vcpu_get_hfar(const struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.fault.far_el2;
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 3eda975..bd94e67 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -290,15 +290,15 @@ struct kvm_vcpu_arch {
 #endif
 
 struct kvm_vm_stat {
-	u32 remote_tlb_flush;
+	ulong remote_tlb_flush;
 };
 
 struct kvm_vcpu_stat {
-	u32 halt_successful_poll;
-	u32 halt_attempted_poll;
-	u32 halt_poll_invalid;
-	u32 halt_wakeup;
-	u32 hvc_exit_stat;
+	u64 halt_successful_poll;
+	u64 halt_attempted_poll;
+	u64 halt_poll_invalid;
+	u64 halt_wakeup;
+	u64 hvc_exit_stat;
 	u64 wfe_exit_stat;
 	u64 wfi_exit_stat;
 	u64 mmio_exit_user;
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index cff5105..b18e852 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -123,6 +123,7 @@ typeof(orig) * __hyp_text fname(void)					\
 
 void __vgic_v2_save_state(struct kvm_vcpu *vcpu);
 void __vgic_v2_restore_state(struct kvm_vcpu *vcpu);
+int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu);
 
 void __vgic_v3_save_state(struct kvm_vcpu *vcpu);
 void __vgic_v3_restore_state(struct kvm_vcpu *vcpu);
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index b6bb834..a79b969 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -99,14 +99,10 @@
 .macro kern_hyp_va	reg
 alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
 	and     \reg, \reg, #HYP_PAGE_OFFSET_HIGH_MASK
-alternative_else
-	nop
-alternative_endif
-alternative_if_not ARM64_HYP_OFFSET_LOW
-	nop
-alternative_else
+alternative_else_nop_endif
+alternative_if ARM64_HYP_OFFSET_LOW
 	and     \reg, \reg, #HYP_PAGE_OFFSET_LOW_MASK
-alternative_endif
+alternative_else_nop_endif
 .endm
 
 #else
@@ -166,12 +162,6 @@ void kvm_clear_hyp_idmap(void);
 #define	kvm_set_pte(ptep, pte)		set_pte(ptep, pte)
 #define	kvm_set_pmd(pmdp, pmd)		set_pmd(pmdp, pmd)
 
-static inline void kvm_clean_pgd(pgd_t *pgd) {}
-static inline void kvm_clean_pmd(pmd_t *pmd) {}
-static inline void kvm_clean_pmd_entry(pmd_t *pmd) {}
-static inline void kvm_clean_pte(pte_t *pte) {}
-static inline void kvm_clean_pte_entry(pte_t *pte) {}
-
 static inline pte_t kvm_s2pte_mkwrite(pte_t pte)
 {
 	pte_val(pte) |= PTE_S2_RDWR;
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 31b7322..ba62df8 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -214,7 +214,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 
 #ifndef CONFIG_SPARSEMEM_VMEMMAP
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define _virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 #else
 #define __virt_to_pgoff(kaddr)	(((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page))
 #define __page_to_voff(kaddr)	(((u64)(page) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page))
@@ -222,11 +222,15 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define page_to_virt(page)	((void *)((__page_to_voff(page)) | PAGE_OFFSET))
 #define virt_to_page(vaddr)	((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START))
 
-#define virt_addr_valid(kaddr)	pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \
+#define _virt_addr_valid(kaddr)	pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \
 					   + PHYS_OFFSET) >> PAGE_SHIFT)
 #endif
 #endif
 
+#define _virt_addr_is_linear(kaddr)	(((u64)(kaddr)) >= PAGE_OFFSET)
+#define virt_addr_valid(kaddr)		(_virt_addr_is_linear(kaddr) && \
+					 _virt_addr_valid(kaddr))
+
 #include <asm-generic/memory_model.h>
 
 #endif
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index b1892a0..a501853 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -27,22 +27,17 @@
 #include <asm-generic/mm_hooks.h>
 #include <asm/cputype.h>
 #include <asm/pgtable.h>
+#include <asm/sysreg.h>
 #include <asm/tlbflush.h>
 
-#ifdef CONFIG_PID_IN_CONTEXTIDR
-static inline void contextidr_thread_switch(struct task_struct *next)
-{
-	asm(
-	"	msr	contextidr_el1, %0\n"
-	"	isb"
-	:
-	: "r" (task_pid_nr(next)));
-}
-#else
 static inline void contextidr_thread_switch(struct task_struct *next)
 {
+	if (!IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR))
+		return;
+
+	write_sysreg(task_pid_nr(next), contextidr_el1);
+	isb();
 }
-#endif
 
 /*
  * Set TTBR0 to empty_zero_page. No translations will be possible via TTBR0.
@@ -51,11 +46,8 @@ static inline void cpu_set_reserved_ttbr0(void)
 {
 	unsigned long ttbr = virt_to_phys(empty_zero_page);
 
-	asm(
-	"	msr	ttbr0_el1, %0			// set TTBR0\n"
-	"	isb"
-	:
-	: "r" (ttbr));
+	write_sysreg(ttbr, ttbr0_el1);
+	isb();
 }
 
 /*
@@ -81,13 +73,11 @@ static inline void __cpu_set_tcr_t0sz(unsigned long t0sz)
 	if (!__cpu_uses_extended_idmap())
 		return;
 
-	asm volatile (
-	"	mrs	%0, tcr_el1	;"
-	"	bfi	%0, %1, %2, %3	;"
-	"	msr	tcr_el1, %0	;"
-	"	isb"
-	: "=&r" (tcr)
-	: "r"(t0sz), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
+	tcr = read_sysreg(tcr_el1);
+	tcr &= ~TCR_T0SZ_MASK;
+	tcr |= t0sz << TCR_T0SZ_OFFSET;
+	write_sysreg(tcr, tcr_el1);
+	isb();
 }
 
 #define cpu_set_default_tcr_t0sz()	__cpu_set_tcr_t0sz(TCR_T0SZ(VA_BITS))
diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h
index 0a456be..2fee2f5 100644
--- a/arch/arm64/include/asm/percpu.h
+++ b/arch/arm64/include/asm/percpu.h
@@ -199,19 +199,19 @@ static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
 #define _percpu_read(pcp)						\
 ({									\
 	typeof(pcp) __retval;						\
-	preempt_disable();						\
+	preempt_disable_notrace();					\
 	__retval = (typeof(pcp))__percpu_read(raw_cpu_ptr(&(pcp)), 	\
 					      sizeof(pcp));		\
-	preempt_enable();						\
+	preempt_enable_notrace();					\
 	__retval;							\
 })
 
 #define _percpu_write(pcp, val)						\
 do {									\
-	preempt_disable();						\
+	preempt_disable_notrace();					\
 	__percpu_write(raw_cpu_ptr(&(pcp)), (unsigned long)(val), 	\
 				sizeof(pcp));				\
-	preempt_enable();						\
+	preempt_enable_notrace();					\
 } while(0)								\
 
 #define _pcp_protect(operation, pcp, val)			\
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index c3ae239..eb0c2bd 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -208,6 +208,7 @@
 #define TCR_T1SZ(x)		((UL(64) - (x)) << TCR_T1SZ_OFFSET)
 #define TCR_TxSZ(x)		(TCR_T0SZ(x) | TCR_T1SZ(x))
 #define TCR_TxSZ_WIDTH		6
+#define TCR_T0SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T0SZ_OFFSET)
 
 #define TCR_IRGN0_SHIFT		8
 #define TCR_IRGN0_MASK		(UL(3) << TCR_IRGN0_SHIFT)
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index 39f5252..2142c77 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -70,12 +70,13 @@
 #define PAGE_COPY_EXEC		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
 #define PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
 #define PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_EXECONLY		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN)
 
 #define __P000  PAGE_NONE
 #define __P001  PAGE_READONLY
 #define __P010  PAGE_COPY
 #define __P011  PAGE_COPY
-#define __P100  PAGE_READONLY_EXEC
+#define __P100  PAGE_EXECONLY
 #define __P101  PAGE_READONLY_EXEC
 #define __P110  PAGE_COPY_EXEC
 #define __P111  PAGE_COPY_EXEC
@@ -84,7 +85,7 @@
 #define __S001  PAGE_READONLY
 #define __S010  PAGE_SHARED
 #define __S011  PAGE_SHARED
-#define __S100  PAGE_READONLY_EXEC
+#define __S100  PAGE_EXECONLY
 #define __S101  PAGE_READONLY_EXEC
 #define __S110  PAGE_SHARED_EXEC
 #define __S111  PAGE_SHARED_EXEC
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index e20bd43..ffbb9a5 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -73,7 +73,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 #define pte_cont(pte)		(!!(pte_val(pte) & PTE_CONT))
-#define pte_user(pte)		(!!(pte_val(pte) & PTE_USER))
+#define pte_ng(pte)		(!!(pte_val(pte) & PTE_NG))
 
 #ifdef CONFIG_ARM64_HW_AFDBM
 #define pte_hw_dirty(pte)	(pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
@@ -84,8 +84,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))
 
 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
-#define pte_valid_not_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
+#define pte_valid_global(pte) \
+	((pte_val(pte) & (PTE_VALID | PTE_NG)) == PTE_VALID)
 #define pte_valid_young(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
 
@@ -155,6 +155,16 @@ static inline pte_t pte_mknoncont(pte_t pte)
 	return clear_pte_bit(pte, __pgprot(PTE_CONT));
 }
 
+static inline pte_t pte_clear_rdonly(pte_t pte)
+{
+	return clear_pte_bit(pte, __pgprot(PTE_RDONLY));
+}
+
+static inline pte_t pte_mkpresent(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(PTE_VALID));
+}
+
 static inline pmd_t pmd_mkcont(pmd_t pmd)
 {
 	return __pmd(pmd_val(pmd) | PMD_SECT_CONT);
@@ -168,7 +178,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 	 * Only if the new pte is valid and kernel, otherwise TLB maintenance
 	 * or update_mmu_cache() have the necessary barriers.
 	 */
-	if (pte_valid_not_user(pte)) {
+	if (pte_valid_global(pte)) {
 		dsb(ishst);
 		isb();
 	}
@@ -202,7 +212,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			pte_val(pte) &= ~PTE_RDONLY;
 		else
 			pte_val(pte) |= PTE_RDONLY;
-		if (pte_user(pte) && pte_exec(pte) && !pte_special(pte))
+		if (pte_ng(pte) && pte_exec(pte) && !pte_special(pte))
 			__sync_icache_dcache(pte, addr);
 	}
 
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index ace0a96..df2e53d 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -37,7 +37,6 @@
 #include <asm/ptrace.h>
 #include <asm/types.h>
 
-#ifdef __KERNEL__
 #define STACK_TOP_MAX		TASK_SIZE_64
 #ifdef CONFIG_COMPAT
 #define AARCH32_VECTORS_BASE	0xffff0000
@@ -49,7 +48,6 @@
 
 extern phys_addr_t arm64_dma_phys_limit;
 #define ARCH_LOW_ADDRESS_LIMIT	(arm64_dma_phys_limit - 1)
-#endif /* __KERNEL__ */
 
 struct debug_info {
 	/* Have we suspended stepping by a debugger? */
diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h
new file mode 100644
index 0000000..4e7e706
--- /dev/null
+++ b/arch/arm64/include/asm/sections.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2016 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SECTIONS_H
+#define __ASM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char __alt_instructions[], __alt_instructions_end[];
+extern char __exception_text_start[], __exception_text_end[];
+extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
+extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
+extern char __hyp_text_start[], __hyp_text_end[];
+extern char __idmap_text_start[], __idmap_text_end[];
+extern char __irqentry_text_start[], __irqentry_text_end[];
+extern char __mmuoff_data_start[], __mmuoff_data_end[];
+
+#endif /* __ASM_SECTIONS_H */
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index e875a5a..cae331d 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -66,8 +66,7 @@ static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
 	ARM64_LSE_ATOMIC_INSN(
 	/* LL/SC */
 "	stxr	%w1, %w0, %2\n"
-"	nop\n"
-"	nop\n",
+	__nops(2),
 	/* LSE atomics */
 "	mov	%w1, %w0\n"
 "	cas	%w0, %w0, %2\n"
@@ -99,9 +98,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	/* LSE atomics */
 "	mov	%w2, %w5\n"
 "	ldadda	%w2, %w0, %3\n"
-"	nop\n"
-"	nop\n"
-"	nop\n"
+	__nops(3)
 	)
 
 	/* Did we get the lock? */
@@ -165,8 +162,8 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
 	"	stlrh	%w1, %0",
 	/* LSE atomics */
 	"	mov	%w1, #1\n"
-	"	nop\n"
-	"	staddlh	%w1, %0")
+	"	staddlh	%w1, %0\n"
+	__nops(1))
 	: "=Q" (lock->owner), "=&r" (tmp)
 	:
 	: "memory");
@@ -212,7 +209,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 	"	cbnz	%w0, 1b\n"
 	"	stxr	%w0, %w2, %1\n"
 	"	cbnz	%w0, 2b\n"
-	"	nop",
+	__nops(1),
 	/* LSE atomics */
 	"1:	mov	%w0, wzr\n"
 	"2:	casa	%w0, %w2, %1\n"
@@ -241,8 +238,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
 	/* LSE atomics */
 	"	mov	%w0, wzr\n"
 	"	casa	%w0, %w2, %1\n"
-	"	nop\n"
-	"	nop")
+	__nops(2))
 	: "=&r" (tmp), "+Q" (rw->lock)
 	: "r" (0x80000000)
 	: "memory");
@@ -290,8 +286,8 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 	"	add	%w0, %w0, #1\n"
 	"	tbnz	%w0, #31, 1b\n"
 	"	stxr	%w1, %w0, %2\n"
-	"	nop\n"
-	"	cbnz	%w1, 2b",
+	"	cbnz	%w1, 2b\n"
+	__nops(1),
 	/* LSE atomics */
 	"1:	wfe\n"
 	"2:	ldxr	%w0, %2\n"
@@ -317,9 +313,8 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 	"	cbnz	%w1, 1b",
 	/* LSE atomics */
 	"	movn	%w0, #0\n"
-	"	nop\n"
-	"	nop\n"
-	"	staddl	%w0, %2")
+	"	staddl	%w0, %2\n"
+	__nops(2))
 	: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
 	:
 	: "memory");
@@ -344,7 +339,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 	"	tbnz	%w1, #31, 1f\n"
 	"	casa	%w0, %w1, %2\n"
 	"	sbc	%w1, %w1, %w0\n"
-	"	nop\n"
+	__nops(1)
 	"1:")
 	: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
 	:
@@ -363,4 +358,14 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 #define arch_read_relax(lock)	cpu_relax()
 #define arch_write_relax(lock)	cpu_relax()
 
+/*
+ * Accesses appearing in program order before a spin_lock() operation
+ * can be reordered with accesses inside the critical section, by virtue
+ * of arch_spin_lock being constructed using acquire semantics.
+ *
+ * In cases where this is problematic (e.g. try_to_wake_up), an
+ * smp_mb__before_spinlock() can restore the required ordering.
+ */
+#define smp_mb__before_spinlock()	smp_mb()
+
 #endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
index 024d623..b8a313f 100644
--- a/arch/arm64/include/asm/suspend.h
+++ b/arch/arm64/include/asm/suspend.h
@@ -47,4 +47,7 @@ int swsusp_arch_resume(void);
 int arch_hibernation_header_save(void *addr, unsigned int max_size);
 int arch_hibernation_header_restore(void *addr);
 
+/* Used to resume on the CPU we hibernated on */
+int hibernate_resume_nonboot_cpu_disable(void);
+
 #endif
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index cc06794..e8d46e8 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -100,6 +100,7 @@
 /* SCTLR_EL1 specific flags. */
 #define SCTLR_EL1_UCI		(1 << 26)
 #define SCTLR_EL1_SPAN		(1 << 23)
+#define SCTLR_EL1_UCT		(1 << 15)
 #define SCTLR_EL1_SED		(1 << 8)
 #define SCTLR_EL1_CP15BEN	(1 << 5)
 
@@ -253,16 +254,6 @@ asm(
 "	.endm\n"
 );
 
-static inline void config_sctlr_el1(u32 clear, u32 set)
-{
-	u32 val;
-
-	asm volatile("mrs %0, sctlr_el1" : "=r" (val));
-	val &= ~clear;
-	val |= set;
-	asm volatile("msr sctlr_el1, %0" : : "r" (val));
-}
-
 /*
  * Unlike read_cpuid, calls to read_sysreg are never expected to be
  * optimized away or replaced with synthetic values.
@@ -273,12 +264,41 @@ static inline void config_sctlr_el1(u32 clear, u32 set)
 	__val;							\
 })
 
+/*
+ * The "Z" constraint normally means a zero immediate, but when combined with
+ * the "%x0" template means XZR.
+ */
 #define write_sysreg(v, r) do {					\
 	u64 __val = (u64)v;					\
-	asm volatile("msr " __stringify(r) ", %0"		\
-		     : : "r" (__val));				\
+	asm volatile("msr " __stringify(r) ", %x0"		\
+		     : : "rZ" (__val));				\
+} while (0)
+
+/*
+ * For registers without architectural names, or simply unsupported by
+ * GAS.
+ */
+#define read_sysreg_s(r) ({						\
+	u64 __val;							\
+	asm volatile("mrs_s %0, " __stringify(r) : "=r" (__val));	\
+	__val;								\
+})
+
+#define write_sysreg_s(v, r) do {					\
+	u64 __val = (u64)v;						\
+	asm volatile("msr_s " __stringify(r) ", %0" : : "rZ" (__val));	\
 } while (0)
 
+static inline void config_sctlr_el1(u32 clear, u32 set)
+{
+	u32 val;
+
+	val = read_sysreg(sctlr_el1);
+	val &= ~clear;
+	val |= set;
+	write_sysreg(val, sctlr_el1);
+}
+
 #endif
 
 #endif	/* __ASM_SYSREG_H */
diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
index 57f110b..bc81243 100644
--- a/arch/arm64/include/asm/system_misc.h
+++ b/arch/arm64/include/asm/system_misc.h
@@ -56,12 +56,6 @@ extern void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 	__show_ratelimited;						\
 })
 
-#define UDBG_UNDEFINED	(1 << 0)
-#define UDBG_SYSCALL	(1 << 1)
-#define UDBG_BADABORT	(1 << 2)
-#define UDBG_SEGV	(1 << 3)
-#define UDBG_BUS	(1 << 4)
-
 #endif	/* __ASSEMBLY__ */
 
 #endif	/* __ASM_SYSTEM_MISC_H */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index abd64bd..e9ea5a6 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -75,6 +75,9 @@ static inline struct thread_info *current_thread_info(void) __attribute_const__;
 
 /*
  * struct thread_info can be accessed directly via sp_el0.
+ *
+ * We don't use read_sysreg() as we want the compiler to cache the value where
+ * possible.
  */
 static inline struct thread_info *current_thread_info(void)
 {
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index b460ae2..deab523 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -25,6 +25,24 @@
 #include <asm/cputype.h>
 
 /*
+ * Raw TLBI operations.
+ *
+ * Where necessary, use the __tlbi() macro to avoid asm()
+ * boilerplate. Drivers and most kernel code should use the TLB
+ * management routines in preference to the macro below.
+ *
+ * The macro can be used as __tlbi(op) or __tlbi(op, arg), depending
+ * on whether a particular TLBI operation takes an argument or
+ * not. The macros handles invoking the asm with or without the
+ * register argument as appropriate.
+ */
+#define __TLBI_0(op, arg)		asm ("tlbi " #op)
+#define __TLBI_1(op, arg)		asm ("tlbi " #op ", %0" : : "r" (arg))
+#define __TLBI_N(op, arg, n, ...)	__TLBI_##n(op, arg)
+
+#define __tlbi(op, ...)		__TLBI_N(op, ##__VA_ARGS__, 1, 0)
+
+/*
  *	TLB Management
  *	==============
  *
@@ -66,7 +84,7 @@
 static inline void local_flush_tlb_all(void)
 {
 	dsb(nshst);
-	asm("tlbi	vmalle1");
+	__tlbi(vmalle1);
 	dsb(nsh);
 	isb();
 }
@@ -74,7 +92,7 @@ static inline void local_flush_tlb_all(void)
 static inline void flush_tlb_all(void)
 {
 	dsb(ishst);
-	asm("tlbi	vmalle1is");
+	__tlbi(vmalle1is);
 	dsb(ish);
 	isb();
 }
@@ -84,7 +102,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 	unsigned long asid = ASID(mm) << 48;
 
 	dsb(ishst);
-	asm("tlbi	aside1is, %0" : : "r" (asid));
+	__tlbi(aside1is, asid);
 	dsb(ish);
 }
 
@@ -94,7 +112,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
 	unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48);
 
 	dsb(ishst);
-	asm("tlbi	vale1is, %0" : : "r" (addr));
+	__tlbi(vale1is, addr);
 	dsb(ish);
 }
 
@@ -122,9 +140,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
 	dsb(ishst);
 	for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) {
 		if (last_level)
-			asm("tlbi vale1is, %0" : : "r"(addr));
+			__tlbi(vale1is, addr);
 		else
-			asm("tlbi vae1is, %0" : : "r"(addr));
+			__tlbi(vae1is, addr);
 	}
 	dsb(ish);
 }
@@ -149,7 +167,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end
 
 	dsb(ishst);
 	for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12))
-		asm("tlbi vaae1is, %0" : : "r"(addr));
+		__tlbi(vaae1is, addr);
 	dsb(ish);
 	isb();
 }
@@ -163,7 +181,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm,
 {
 	unsigned long addr = uaddr >> 12 | (ASID(mm) << 48);
 
-	asm("tlbi	vae1is, %0" : : "r" (addr));
+	__tlbi(vae1is, addr);
 	dsb(ish);
 }
 
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
index 9cd03f3..02e9035 100644
--- a/arch/arm64/include/asm/traps.h
+++ b/arch/arm64/include/asm/traps.h
@@ -19,6 +19,7 @@
 #define __ASM_TRAP_H
 
 #include <linux/list.h>
+#include <asm/sections.h>
 
 struct pt_regs;
 
@@ -39,9 +40,6 @@ void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr);
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 static inline int __in_irqentry_text(unsigned long ptr)
 {
-	extern char __irqentry_text_start[];
-	extern char __irqentry_text_end[];
-
 	return ptr >= (unsigned long)&__irqentry_text_start &&
 	       ptr < (unsigned long)&__irqentry_text_end;
 }
@@ -54,8 +52,6 @@ static inline int __in_irqentry_text(unsigned long ptr)
 
 static inline int in_exception_text(unsigned long ptr)
 {
-	extern char __exception_text_start[];
-	extern char __exception_text_end[];
 	int in;
 
 	in = ptr >= (unsigned long)&__exception_text_start &&
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 1788545..fea1073 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -45,6 +45,8 @@
 #ifndef __ASSEMBLY__
 
 #include <asm/ptrace.h>
+#include <asm/sections.h>
+#include <asm/sysreg.h>
 
 /*
  * __boot_cpu_mode records what mode CPUs were booted in.
@@ -75,10 +77,7 @@ static inline bool is_hyp_mode_mismatched(void)
 
 static inline bool is_kernel_in_hyp_mode(void)
 {
-	u64 el;
-
-	asm("mrs %0, CurrentEL" : "=r" (el));
-	return el == CurrentEL_EL2;
+	return read_sysreg(CurrentEL) == CurrentEL_EL2;
 }
 
 #ifdef CONFIG_ARM64_VHE
@@ -87,14 +86,6 @@ extern void verify_cpu_run_el(void);
 static inline void verify_cpu_run_el(void) {}
 #endif
 
-/* The section containing the hypervisor idmap text */
-extern char __hyp_idmap_text_start[];
-extern char __hyp_idmap_text_end[];
-
-/* The section containing the hypervisor text */
-extern char __hyp_text_start[];
-extern char __hyp_text_end[];
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* ! __ASM__VIRT_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 14f7b65..7d66bba 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -10,6 +10,8 @@ CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_insn.o = -pg
 CFLAGS_REMOVE_return_address.o = -pg
 
+CFLAGS_setup.o = -DUTS_MACHINE='"$(UTS_MACHINE)"'
+
 # Object file lists.
 arm64-obj-y		:= debug-monitors.o entry.o irq.o fpsimd.o		\
 			   entry-fpsimd.o process.o ptrace.o setup.o signal.o	\
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 3e4f1a4..252a6d9 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -24,6 +24,7 @@
 #include <linux/memblock.h>
 #include <linux/of_fdt.h>
 #include <linux/smp.h>
+#include <linux/serial_core.h>
 
 #include <asm/cputype.h>
 #include <asm/cpu_ops.h>
@@ -206,7 +207,7 @@ void __init acpi_boot_table_init(void)
 	if (param_acpi_off ||
 	    (!param_acpi_on && !param_acpi_force &&
 	     of_scan_flat_dt(dt_scan_depth1_nodes, NULL)))
-		return;
+		goto done;
 
 	/*
 	 * ACPI is disabled at this point. Enable it in order to parse
@@ -226,6 +227,14 @@ void __init acpi_boot_table_init(void)
 		if (!param_acpi_force)
 			disable_acpi();
 	}
+
+done:
+	if (acpi_disabled) {
+		if (earlycon_init_is_deferred)
+			early_init_dt_scan_chosen_stdout();
+	} else {
+		parse_spcr(earlycon_init_is_deferred);
+	}
 }
 
 #ifdef CONFIG_ACPI_APEI
diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c
index f85149c..f01fab6 100644
--- a/arch/arm64/kernel/acpi_numa.c
+++ b/arch/arm64/kernel/acpi_numa.c
@@ -105,8 +105,10 @@ int __init arm64_acpi_numa_init(void)
 	int ret;
 
 	ret = acpi_numa_init();
-	if (ret)
+	if (ret) {
+		pr_info("Failed to initialise from firmware\n");
 		return ret;
+	}
 
 	return srat_disabled() ? -EINVAL : 0;
 }
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index d2ee1b2..06d650f 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -25,14 +25,13 @@
 #include <asm/alternative.h>
 #include <asm/cpufeature.h>
 #include <asm/insn.h>
+#include <asm/sections.h>
 #include <linux/stop_machine.h>
 
 #define __ALT_PTR(a,f)		(u32 *)((void *)&(a)->f + (a)->f)
 #define ALT_ORIG_PTR(a)		__ALT_PTR(a, orig_offset)
 #define ALT_REPL_PTR(a)		__ALT_PTR(a, alt_offset)
 
-extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
-
 struct alt_region {
 	struct alt_instr *begin;
 	struct alt_instr *end;
@@ -59,6 +58,8 @@ static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 	BUG();
 }
 
+#define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))
+
 static u32 get_alt_insn(struct alt_instr *alt, u32 *insnptr, u32 *altinsnptr)
 {
 	u32 insn;
@@ -80,6 +81,25 @@ static u32 get_alt_insn(struct alt_instr *alt, u32 *insnptr, u32 *altinsnptr)
 			offset = target - (unsigned long)insnptr;
 			insn = aarch64_set_branch_offset(insn, offset);
 		}
+	} else if (aarch64_insn_is_adrp(insn)) {
+		s32 orig_offset, new_offset;
+		unsigned long target;
+
+		/*
+		 * If we're replacing an adrp instruction, which uses PC-relative
+		 * immediate addressing, adjust the offset to reflect the new
+		 * PC. adrp operates on 4K aligned addresses.
+		 */
+		orig_offset  = aarch64_insn_adrp_get_offset(insn);
+		target = align_down(altinsnptr, SZ_4K) + orig_offset;
+		new_offset = target - align_down(insnptr, SZ_4K);
+		insn = aarch64_insn_adrp_set_offset(insn, new_offset);
+	} else if (aarch64_insn_uses_literal(insn)) {
+		/*
+		 * Disallow patching unhandled instructions using PC relative
+		 * literal addresses
+		 */
+		BUG();
 	}
 
 	return insn;
@@ -124,8 +144,8 @@ static int __apply_alternatives_multi_stop(void *unused)
 {
 	static int patched = 0;
 	struct alt_region region = {
-		.begin	= __alt_instructions,
-		.end	= __alt_instructions_end,
+		.begin	= (struct alt_instr *)__alt_instructions,
+		.end	= (struct alt_instr *)__alt_instructions_end,
 	};
 
 	/* We always have a CPU 0 at this point (__init) */
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 05070b7..4a2f0f0 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -23,6 +23,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/kvm_host.h>
 #include <linux/suspend.h>
+#include <asm/cpufeature.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/smp_plat.h>
@@ -145,5 +146,6 @@ int main(void)
   DEFINE(HIBERN_PBE_ORIG,	offsetof(struct pbe, orig_address));
   DEFINE(HIBERN_PBE_ADDR,	offsetof(struct pbe, address));
   DEFINE(HIBERN_PBE_NEXT,	offsetof(struct pbe, next));
+  DEFINE(ARM64_FTR_SYSVAL,	offsetof(struct arm64_ftr_reg, sys_val));
   return 0;
 }
diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c
index b8629d5..9617301 100644
--- a/arch/arm64/kernel/cacheinfo.c
+++ b/arch/arm64/kernel/cacheinfo.c
@@ -39,7 +39,7 @@ static inline enum cache_type get_cache_type(int level)
 
 	if (level > MAX_CACHE_LEVEL)
 		return CACHE_TYPE_NOCACHE;
-	asm volatile ("mrs     %x0, clidr_el1" : "=r" (clidr));
+	clidr = read_sysreg(clidr_el1);
 	return CLIDR_CTYPE(clidr, level);
 }
 
@@ -55,11 +55,9 @@ u64 __attribute_const__ cache_get_ccsidr(u64 csselr)
 
 	WARN_ON(preemptible());
 
-	/* Put value into CSSELR */
-	asm volatile("msr csselr_el1, %x0" : : "r" (csselr));
+	write_sysreg(csselr, csselr_el1);
 	isb();
-	/* Read result out of CCSIDR */
-	asm volatile("mrs %x0, ccsidr_el1" : "=r" (ccsidr));
+	ccsidr = read_sysreg(ccsidr_el1);
 
 	return ccsidr;
 }
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 82b0fc2..0150394 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -30,6 +30,21 @@ is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
 				       entry->midr_range_max);
 }
 
+static bool
+has_mismatched_cache_line_size(const struct arm64_cpu_capabilities *entry,
+				int scope)
+{
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	return (read_cpuid_cachetype() & arm64_ftr_reg_ctrel0.strict_mask) !=
+		(arm64_ftr_reg_ctrel0.sys_val & arm64_ftr_reg_ctrel0.strict_mask);
+}
+
+static void cpu_enable_trap_ctr_access(void *__unused)
+{
+	/* Clear SCTLR_EL1.UCT */
+	config_sctlr_el1(SCTLR_EL1_UCT, 0);
+}
+
 #define MIDR_RANGE(model, min, max) \
 	.def_scope = SCOPE_LOCAL_CPU, \
 	.matches = is_affected_midr_range, \
@@ -108,6 +123,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 	},
 #endif
 	{
+		.desc = "Mismatched cache line size",
+		.capability = ARM64_MISMATCHED_CACHE_LINE_SIZE,
+		.matches = has_mismatched_cache_line_size,
+		.def_scope = SCOPE_LOCAL_CPU,
+		.enable = cpu_enable_trap_ctr_access,
+	},
+	{
 	}
 };
 
@@ -116,7 +138,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
  * and the related information is freed soon after. If the new CPU requires
  * an errata not detected at boot, fail this CPU.
  */
-void verify_local_cpu_errata(void)
+void verify_local_cpu_errata_workarounds(void)
 {
 	const struct arm64_cpu_capabilities *caps = arm64_errata;
 
@@ -131,7 +153,7 @@ void verify_local_cpu_errata(void)
 		}
 }
 
-void check_local_cpu_errata(void)
+void update_cpu_errata_workarounds(void)
 {
 	update_cpu_capabilities(arm64_errata, "enabling workaround for");
 }
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
index c7cfb8f..e137cea 100644
--- a/arch/arm64/kernel/cpu_ops.c
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/cache.h>
 #include <linux/errno.h>
 #include <linux/of.h>
 #include <linux/string.h>
@@ -28,7 +29,7 @@ extern const struct cpu_operations smp_spin_table_ops;
 extern const struct cpu_operations acpi_parking_protocol_ops;
 extern const struct cpu_operations cpu_psci_ops;
 
-const struct cpu_operations *cpu_ops[NR_CPUS];
+const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
 
 static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = {
 	&smp_spin_table_ops,
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 62272ea..d577f26 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -46,6 +46,9 @@ unsigned int compat_elf_hwcap2 __read_mostly;
 
 DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
 
+DEFINE_STATIC_KEY_ARRAY_FALSE(cpu_hwcap_keys, ARM64_NCAPS);
+EXPORT_SYMBOL(cpu_hwcap_keys);
+
 #define __ARM64_FTR_BITS(SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
 	{						\
 		.sign = SIGNED,				\
@@ -74,7 +77,7 @@ static bool __maybe_unused
 cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry, int __unused);
 
 
-static struct arm64_ftr_bits ftr_id_aa64isar0[] = {
+static const struct arm64_ftr_bits ftr_id_aa64isar0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64ISAR0_RDM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0),
@@ -87,7 +90,7 @@ static struct arm64_ftr_bits ftr_id_aa64isar0[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
+static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_GIC_SHIFT, 4, 0),
@@ -101,7 +104,7 @@ static struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
+static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI),
 	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI),
@@ -119,7 +122,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
+static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_PAN_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_LOR_SHIFT, 4, 0),
@@ -130,7 +133,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
+static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_LVA_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_IESB_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_LSM_SHIFT, 4, 0),
@@ -139,7 +142,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_ctr[] = {
+static const struct arm64_ftr_bits ftr_ctr[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1),	/* RAO */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 3, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0),	/* CWG */
@@ -147,15 +150,21 @@ static struct arm64_ftr_bits ftr_ctr[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1),	/* DminLine */
 	/*
 	 * Linux can handle differing I-cache policies. Userspace JITs will
-	 * make use of *minLine
+	 * make use of *minLine.
+	 * If we have differing I-cache policies, report it as the weakest - AIVIVT.
 	 */
-	ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0),	/* L1Ip */
+	ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, ICACHE_POLICY_AIVIVT),	/* L1Ip */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 10, 0),	/* RAZ */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),	/* IminLine */
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_mmfr0[] = {
+struct arm64_ftr_reg arm64_ftr_reg_ctrel0 = {
+	.name		= "SYS_CTR_EL0",
+	.ftr_bits	= ftr_ctr
+};
+
+static const struct arm64_ftr_bits ftr_id_mmfr0[] = {
 	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0xf),	/* InnerShr */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0),	/* FCSE */
 	ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, 20, 4, 0),	/* AuxReg */
@@ -167,7 +176,7 @@ static struct arm64_ftr_bits ftr_id_mmfr0[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
+static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
@@ -178,14 +187,14 @@ static struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_mvfr2[] = {
+static const struct arm64_ftr_bits ftr_mvfr2[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 24, 0),	/* RAZ */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0),		/* FPMisc */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0),		/* SIMDMisc */
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_dczid[] = {
+static const struct arm64_ftr_bits ftr_dczid[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 5, 27, 0),	/* RAZ */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 1, 1),		/* DZP */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),	/* BS */
@@ -193,7 +202,7 @@ static struct arm64_ftr_bits ftr_dczid[] = {
 };
 
 
-static struct arm64_ftr_bits ftr_id_isar5[] = {
+static const struct arm64_ftr_bits ftr_id_isar5[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_RDM_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 20, 4, 0),	/* RAZ */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_CRC32_SHIFT, 4, 0),
@@ -204,14 +213,14 @@ static struct arm64_ftr_bits ftr_id_isar5[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_mmfr4[] = {
+static const struct arm64_ftr_bits ftr_id_mmfr4[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 24, 0),	/* RAZ */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0),		/* ac2 */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0),		/* RAZ */
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_pfr0[] = {
+static const struct arm64_ftr_bits ftr_id_pfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 16, 16, 0),	/* RAZ */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 12, 4, 0),	/* State3 */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 4, 0),		/* State2 */
@@ -220,7 +229,7 @@ static struct arm64_ftr_bits ftr_id_pfr0[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_id_dfr0[] = {
+static const struct arm64_ftr_bits ftr_id_dfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
 	S_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
@@ -238,7 +247,7 @@ static struct arm64_ftr_bits ftr_id_dfr0[] = {
  * 0. Covers the following 32bit registers:
  * id_isar[0-4], id_mmfr[1-3], id_pfr1, mvfr[0-1]
  */
-static struct arm64_ftr_bits ftr_generic_32bits[] = {
+static const struct arm64_ftr_bits ftr_generic_32bits[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
@@ -250,29 +259,32 @@ static struct arm64_ftr_bits ftr_generic_32bits[] = {
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_generic[] = {
+static const struct arm64_ftr_bits ftr_generic[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 64, 0),
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_generic32[] = {
+static const struct arm64_ftr_bits ftr_generic32[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 32, 0),
 	ARM64_FTR_END,
 };
 
-static struct arm64_ftr_bits ftr_aa64raz[] = {
+static const struct arm64_ftr_bits ftr_aa64raz[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 64, 0),
 	ARM64_FTR_END,
 };
 
-#define ARM64_FTR_REG(id, table)		\
-	{					\
-		.sys_id = id,			\
+#define ARM64_FTR_REG(id, table) {		\
+	.sys_id = id,				\
+	.reg = 	&(struct arm64_ftr_reg){	\
 		.name = #id,			\
 		.ftr_bits = &((table)[0]),	\
-	}
+	}}
 
-static struct arm64_ftr_reg arm64_ftr_regs[] = {
+static const struct __ftr_reg_entry {
+	u32			sys_id;
+	struct arm64_ftr_reg 	*reg;
+} arm64_ftr_regs[] = {
 
 	/* Op1 = 0, CRn = 0, CRm = 1 */
 	ARM64_FTR_REG(SYS_ID_PFR0_EL1, ftr_id_pfr0),
@@ -315,7 +327,7 @@ static struct arm64_ftr_reg arm64_ftr_regs[] = {
 	ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
 
 	/* Op1 = 3, CRn = 0, CRm = 0 */
-	ARM64_FTR_REG(SYS_CTR_EL0, ftr_ctr),
+	{ SYS_CTR_EL0, &arm64_ftr_reg_ctrel0 },
 	ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid),
 
 	/* Op1 = 3, CRn = 14, CRm = 0 */
@@ -324,7 +336,7 @@ static struct arm64_ftr_reg arm64_ftr_regs[] = {
 
 static int search_cmp_ftr_reg(const void *id, const void *regp)
 {
-	return (int)(unsigned long)id - (int)((const struct arm64_ftr_reg *)regp)->sys_id;
+	return (int)(unsigned long)id - (int)((const struct __ftr_reg_entry *)regp)->sys_id;
 }
 
 /*
@@ -339,14 +351,20 @@ static int search_cmp_ftr_reg(const void *id, const void *regp)
  */
 static struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id)
 {
-	return bsearch((const void *)(unsigned long)sys_id,
+	const struct __ftr_reg_entry *ret;
+
+	ret = bsearch((const void *)(unsigned long)sys_id,
 			arm64_ftr_regs,
 			ARRAY_SIZE(arm64_ftr_regs),
 			sizeof(arm64_ftr_regs[0]),
 			search_cmp_ftr_reg);
+	if (ret)
+		return ret->reg;
+	return NULL;
 }
 
-static u64 arm64_ftr_set_value(struct arm64_ftr_bits *ftrp, s64 reg, s64 ftr_val)
+static u64 arm64_ftr_set_value(const struct arm64_ftr_bits *ftrp, s64 reg,
+			       s64 ftr_val)
 {
 	u64 mask = arm64_ftr_mask(ftrp);
 
@@ -355,7 +373,8 @@ static u64 arm64_ftr_set_value(struct arm64_ftr_bits *ftrp, s64 reg, s64 ftr_val
 	return reg;
 }
 
-static s64 arm64_ftr_safe_value(struct arm64_ftr_bits *ftrp, s64 new, s64 cur)
+static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new,
+				s64 cur)
 {
 	s64 ret = 0;
 
@@ -376,27 +395,13 @@ static s64 arm64_ftr_safe_value(struct arm64_ftr_bits *ftrp, s64 new, s64 cur)
 	return ret;
 }
 
-static int __init sort_cmp_ftr_regs(const void *a, const void *b)
-{
-	return ((const struct arm64_ftr_reg *)a)->sys_id -
-		 ((const struct arm64_ftr_reg *)b)->sys_id;
-}
-
-static void __init swap_ftr_regs(void *a, void *b, int size)
-{
-	struct arm64_ftr_reg tmp = *(struct arm64_ftr_reg *)a;
-	*(struct arm64_ftr_reg *)a = *(struct arm64_ftr_reg *)b;
-	*(struct arm64_ftr_reg *)b = tmp;
-}
-
 static void __init sort_ftr_regs(void)
 {
-	/* Keep the array sorted so that we can do the binary search */
-	sort(arm64_ftr_regs,
-		ARRAY_SIZE(arm64_ftr_regs),
-		sizeof(arm64_ftr_regs[0]),
-		sort_cmp_ftr_regs,
-		swap_ftr_regs);
+	int i;
+
+	/* Check that the array is sorted so that we can do the binary search */
+	for (i = 1; i < ARRAY_SIZE(arm64_ftr_regs); i++)
+		BUG_ON(arm64_ftr_regs[i].sys_id < arm64_ftr_regs[i - 1].sys_id);
 }
 
 /*
@@ -407,7 +412,7 @@ static void __init init_cpu_ftr_reg(u32 sys_reg, u64 new)
 {
 	u64 val = 0;
 	u64 strict_mask = ~0x0ULL;
-	struct arm64_ftr_bits *ftrp;
+	const struct arm64_ftr_bits *ftrp;
 	struct arm64_ftr_reg *reg = get_arm64_ftr_reg(sys_reg);
 
 	BUG_ON(!reg);
@@ -464,7 +469,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 
 static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
 {
-	struct arm64_ftr_bits *ftrp;
+	const struct arm64_ftr_bits *ftrp;
 
 	for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) {
 		s64 ftr_cur = arm64_ftr_value(ftrp, reg->sys_val);
@@ -1004,23 +1009,33 @@ verify_local_cpu_features(const struct arm64_cpu_capabilities *caps)
  * cannot do anything to fix it up and could cause unexpected failures. So
  * we park the CPU.
  */
-void verify_local_cpu_capabilities(void)
+static void verify_local_cpu_capabilities(void)
 {
+	verify_local_cpu_errata_workarounds();
+	verify_local_cpu_features(arm64_features);
+	verify_local_elf_hwcaps(arm64_elf_hwcaps);
+	if (system_supports_32bit_el0())
+		verify_local_elf_hwcaps(compat_elf_hwcaps);
+}
 
+void check_local_cpu_capabilities(void)
+{
+	/*
+	 * All secondary CPUs should conform to the early CPU features
+	 * in use by the kernel based on boot CPU.
+	 */
 	check_early_cpu_features();
 
 	/*
-	 * If we haven't computed the system capabilities, there is nothing
-	 * to verify.
+	 * If we haven't finalised the system capabilities, this CPU gets
+	 * a chance to update the errata work arounds.
+	 * Otherwise, this CPU should verify that it has all the system
+	 * advertised capabilities.
 	 */
 	if (!sys_caps_initialised)
-		return;
-
-	verify_local_cpu_errata();
-	verify_local_cpu_features(arm64_features);
-	verify_local_elf_hwcaps(arm64_elf_hwcaps);
-	if (system_supports_32bit_el0())
-		verify_local_elf_hwcaps(compat_elf_hwcaps);
+		update_cpu_errata_workarounds();
+	else
+		verify_local_cpu_capabilities();
 }
 
 static void __init setup_feature_capabilities(void)
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index ed1b84f..b3d5b3e 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -363,8 +363,6 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	}
 
 	cpuinfo_detect_icache_policy(info);
-
-	check_local_cpu_errata();
 }
 
 void cpuinfo_store_cpu(void)
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 91fff48..73ae90e 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -46,16 +46,14 @@ static void mdscr_write(u32 mdscr)
 {
 	unsigned long flags;
 	local_dbg_save(flags);
-	asm volatile("msr mdscr_el1, %0" :: "r" (mdscr));
+	write_sysreg(mdscr, mdscr_el1);
 	local_dbg_restore(flags);
 }
 NOKPROBE_SYMBOL(mdscr_write);
 
 static u32 mdscr_read(void)
 {
-	u32 mdscr;
-	asm volatile("mrs %0, mdscr_el1" : "=r" (mdscr));
-	return mdscr;
+	return read_sysreg(mdscr_el1);
 }
 NOKPROBE_SYMBOL(mdscr_read);
 
@@ -132,36 +130,18 @@ NOKPROBE_SYMBOL(disable_debug_monitors);
 /*
  * OS lock clearing.
  */
-static void clear_os_lock(void *unused)
+static int clear_os_lock(unsigned int cpu)
 {
-	asm volatile("msr oslar_el1, %0" : : "r" (0));
-}
-
-static int os_lock_notify(struct notifier_block *self,
-				    unsigned long action, void *data)
-{
-	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
-		clear_os_lock(NULL);
-	return NOTIFY_OK;
+	write_sysreg(0, oslar_el1);
+	isb();
+	return 0;
 }
 
-static struct notifier_block os_lock_nb = {
-	.notifier_call = os_lock_notify,
-};
-
 static int debug_monitors_init(void)
 {
-	cpu_notifier_register_begin();
-
-	/* Clear the OS lock. */
-	on_each_cpu(clear_os_lock, NULL, 1);
-	isb();
-
-	/* Register hotplug handler. */
-	__register_cpu_notifier(&os_lock_nb);
-
-	cpu_notifier_register_done();
-	return 0;
+	return cpuhp_setup_state(CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING,
+				 "CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING",
+				 clear_os_lock, NULL);
 }
 postcore_initcall(debug_monitors_init);
 
@@ -254,7 +234,7 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
 		return 0;
 
 	if (user_mode(regs)) {
-		send_user_sigtrap(TRAP_HWBKPT);
+		send_user_sigtrap(TRAP_TRACE);
 
 		/*
 		 * ptrace will disable single step unless explicitly
@@ -382,7 +362,7 @@ NOKPROBE_SYMBOL(aarch32_break_handler);
 static int __init debug_traps_init(void)
 {
 	hook_debug_fault_code(DBG_ESR_EVT_HWSS, single_step_handler, SIGTRAP,
-			      TRAP_HWBKPT, "single-step handler");
+			      TRAP_TRACE, "single-step handler");
 	hook_debug_fault_code(DBG_ESR_EVT_BRK, brk_handler, SIGTRAP,
 			      TRAP_BRKPT, "ptrace BRK handler");
 	return 0;
@@ -435,8 +415,10 @@ NOKPROBE_SYMBOL(kernel_active_single_step);
 /* ptrace API */
 void user_enable_single_step(struct task_struct *task)
 {
-	set_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP);
-	set_regs_spsr_ss(task_pt_regs(task));
+	struct thread_info *ti = task_thread_info(task);
+
+	if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP))
+		set_regs_spsr_ss(task_pt_regs(task));
 }
 NOKPROBE_SYMBOL(user_enable_single_step);
 
diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
index 0f03a8f..aef02d2 100644
--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -219,7 +219,7 @@ ENDPROC(ftrace_graph_caller)
  *
  * Run ftrace_return_to_handler() before going back to parent.
  * @fp is checked against the value passed by ftrace_graph_caller()
- * only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
+ * only when HAVE_FUNCTION_GRAPH_FP_TEST is enabled.
  */
 ENTRY(return_to_handler)
 	save_return_regs
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 441420c..223d54a 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -104,7 +104,7 @@
 	str	x20, [sp, #S_ORIG_ADDR_LIMIT]
 	mov	x20, #TASK_SIZE_64
 	str	x20, [tsk, #TI_ADDR_LIMIT]
-	ALTERNATIVE(nop, SET_PSTATE_UAO(0), ARM64_HAS_UAO, CONFIG_ARM64_UAO)
+	/* No need to reset PSTATE.UAO, hardware's already set it to 0 for us */
 	.endif /* \el == 0 */
 	mrs	x22, elr_el1
 	mrs	x23, spsr_el1
@@ -150,13 +150,7 @@
 	ldr	x23, [sp, #S_SP]		// load return stack pointer
 	msr	sp_el0, x23
 #ifdef CONFIG_ARM64_ERRATUM_845719
-alternative_if_not ARM64_WORKAROUND_845719
-	nop
-	nop
-#ifdef CONFIG_PID_IN_CONTEXTIDR
-	nop
-#endif
-alternative_else
+alternative_if ARM64_WORKAROUND_845719
 	tbz	x22, #4, 1f
 #ifdef CONFIG_PID_IN_CONTEXTIDR
 	mrs	x29, contextidr_el1
@@ -165,7 +159,7 @@ alternative_else
 	msr contextidr_el1, xzr
 #endif
 1:
-alternative_endif
+alternative_else_nop_endif
 #endif
 	.endif
 	msr	elr_el1, x21			// set up the return data
@@ -707,18 +701,13 @@ ret_fast_syscall_trace:
  * Ok, we need to do extra processing, enter the slow path.
  */
 work_pending:
-	tbnz	x1, #TIF_NEED_RESCHED, work_resched
-	/* TIF_SIGPENDING, TIF_NOTIFY_RESUME or TIF_FOREIGN_FPSTATE case */
 	mov	x0, sp				// 'regs'
-	enable_irq				// enable interrupts for do_notify_resume()
 	bl	do_notify_resume
-	b	ret_to_user
-work_resched:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off		// the IRQs are off here, inform the tracing code
+	bl	trace_hardirqs_on		// enabled while in userspace
 #endif
-	bl	schedule
-
+	ldr	x1, [tsk, #TI_FLAGS]		// re-check for single-step
+	b	finish_ret_to_user
 /*
  * "slow" syscall return path.
  */
@@ -727,6 +716,7 @@ ret_to_user:
 	ldr	x1, [tsk, #TI_FLAGS]
 	and	x2, x1, #_TIF_WORK_MASK
 	cbnz	x2, work_pending
+finish_ret_to_user:
 	enable_step_tsk x1, x2
 	kernel_exit 0
 ENDPROC(ret_to_user)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 975b274..394c61d 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -299,28 +299,16 @@ static inline void fpsimd_pm_init(void) { }
 #endif /* CONFIG_CPU_PM */
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int fpsimd_cpu_hotplug_notifier(struct notifier_block *nfb,
-				       unsigned long action,
-				       void *hcpu)
+static int fpsimd_cpu_dead(unsigned int cpu)
 {
-	unsigned int cpu = (long)hcpu;
-
-	switch (action) {
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		per_cpu(fpsimd_last_state, cpu) = NULL;
-		break;
-	}
-	return NOTIFY_OK;
+	per_cpu(fpsimd_last_state, cpu) = NULL;
+	return 0;
 }
 
-static struct notifier_block fpsimd_cpu_hotplug_notifier_block = {
-	.notifier_call = fpsimd_cpu_hotplug_notifier,
-};
-
 static inline void fpsimd_hotplug_init(void)
 {
-	register_cpu_notifier(&fpsimd_cpu_hotplug_notifier_block);
+	cpuhp_setup_state_nocalls(CPUHP_ARM64_FPSIMD_DEAD, "arm64/fpsimd:dead",
+				  NULL, fpsimd_cpu_dead);
 }
 
 #else
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index ebecf9a..40ad08a 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -138,7 +138,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 		return;
 
 	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer);
+				       frame_pointer, NULL);
 	if (err == -EBUSY)
 		return;
 	else
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 3e7b050..427f6d3 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -208,13 +208,23 @@ efi_header_end:
 
 	__INIT
 
+	/*
+	 * The following callee saved general purpose registers are used on the
+	 * primary lowlevel boot path:
+	 *
+	 *  Register   Scope                      Purpose
+	 *  x21        stext() .. start_kernel()  FDT pointer passed at boot in x0
+	 *  x23        stext() .. start_kernel()  physical misalignment/KASLR offset
+	 *  x28        __create_page_tables()     callee preserved temp register
+	 *  x19/x20    __primary_switch()         callee preserved temp registers
+	 */
 ENTRY(stext)
 	bl	preserve_boot_args
-	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
-	adrp	x24, __PHYS_OFFSET
-	and	x23, x24, MIN_KIMG_ALIGN - 1	// KASLR offset, defaults to 0
+	bl	el2_setup			// Drop to EL1, w0=cpu_boot_mode
+	adrp	x23, __PHYS_OFFSET
+	and	x23, x23, MIN_KIMG_ALIGN - 1	// KASLR offset, defaults to 0
 	bl	set_cpu_boot_mode_flag
-	bl	__create_page_tables		// x25=TTBR0, x26=TTBR1
+	bl	__create_page_tables
 	/*
 	 * The following calls CPU setup code, see arch/arm64/mm/proc.S for
 	 * details.
@@ -222,9 +232,7 @@ ENTRY(stext)
 	 * the TCR will have been set.
 	 */
 	bl	__cpu_setup			// initialise processor
-	adr_l	x27, __primary_switch		// address to jump to after
-						// MMU has been enabled
-	b	__enable_mmu
+	b	__primary_switch
 ENDPROC(stext)
 
 /*
@@ -311,23 +319,21 @@ ENDPROC(preserve_boot_args)
  *     been enabled
  */
 __create_page_tables:
-	adrp	x25, idmap_pg_dir
-	adrp	x26, swapper_pg_dir
 	mov	x28, lr
 
 	/*
 	 * Invalidate the idmap and swapper page tables to avoid potential
 	 * dirty cache lines being evicted.
 	 */
-	mov	x0, x25
-	add	x1, x26, #SWAPPER_DIR_SIZE
+	adrp	x0, idmap_pg_dir
+	adrp	x1, swapper_pg_dir + SWAPPER_DIR_SIZE
 	bl	__inval_cache_range
 
 	/*
 	 * Clear the idmap and swapper page tables.
 	 */
-	mov	x0, x25
-	add	x6, x26, #SWAPPER_DIR_SIZE
+	adrp	x0, idmap_pg_dir
+	adrp	x6, swapper_pg_dir + SWAPPER_DIR_SIZE
 1:	stp	xzr, xzr, [x0], #16
 	stp	xzr, xzr, [x0], #16
 	stp	xzr, xzr, [x0], #16
@@ -340,7 +346,7 @@ __create_page_tables:
 	/*
 	 * Create the identity mapping.
 	 */
-	mov	x0, x25				// idmap_pg_dir
+	adrp	x0, idmap_pg_dir
 	adrp	x3, __idmap_text_start		// __pa(__idmap_text_start)
 
 #ifndef CONFIG_ARM64_VA_BITS_48
@@ -390,7 +396,7 @@ __create_page_tables:
 	/*
 	 * Map the kernel image (starting with PHYS_OFFSET).
 	 */
-	mov	x0, x26				// swapper_pg_dir
+	adrp	x0, swapper_pg_dir
 	mov_q	x5, KIMAGE_VADDR + TEXT_OFFSET	// compile time __va(_text)
 	add	x5, x5, x23			// add KASLR displacement
 	create_pgd_entry x0, x5, x3, x6
@@ -405,8 +411,8 @@ __create_page_tables:
 	 * accesses (MMU disabled), invalidate the idmap and swapper page
 	 * tables again to remove any speculatively loaded cache lines.
 	 */
-	mov	x0, x25
-	add	x1, x26, #SWAPPER_DIR_SIZE
+	adrp	x0, idmap_pg_dir
+	adrp	x1, swapper_pg_dir + SWAPPER_DIR_SIZE
 	dmb	sy
 	bl	__inval_cache_range
 
@@ -416,14 +422,27 @@ ENDPROC(__create_page_tables)
 
 /*
  * The following fragment of code is executed with the MMU enabled.
+ *
+ *   x0 = __PHYS_OFFSET
  */
-	.set	initial_sp, init_thread_union + THREAD_START_SP
 __primary_switched:
-	mov	x28, lr				// preserve LR
+	adrp	x4, init_thread_union
+	add	sp, x4, #THREAD_SIZE
+	msr	sp_el0, x4			// Save thread_info
+
 	adr_l	x8, vectors			// load VBAR_EL1 with virtual
 	msr	vbar_el1, x8			// vector table address
 	isb
 
+	stp	xzr, x30, [sp, #-16]!
+	mov	x29, sp
+
+	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
+
+	ldr_l	x4, kimage_vaddr		// Save the offset between
+	sub	x4, x4, x0			// the kernel virtual and
+	str_l	x4, kimage_voffset, x5		// physical mappings
+
 	// Clear BSS
 	adr_l	x0, __bss_start
 	mov	x1, xzr
@@ -432,17 +451,6 @@ __primary_switched:
 	bl	__pi_memset
 	dsb	ishst				// Make zero page visible to PTW
 
-	adr_l	sp, initial_sp, x4
-	mov	x4, sp
-	and	x4, x4, #~(THREAD_SIZE - 1)
-	msr	sp_el0, x4			// Save thread_info
-	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
-
-	ldr_l	x4, kimage_vaddr		// Save the offset between
-	sub	x4, x4, x24			// the kernel virtual and
-	str_l	x4, kimage_voffset, x5		// physical mappings
-
-	mov	x29, #0
 #ifdef CONFIG_KASAN
 	bl	kasan_early_init
 #endif
@@ -454,8 +462,8 @@ __primary_switched:
 	bl	kaslr_early_init		// parse FDT for KASLR options
 	cbz	x0, 0f				// KASLR disabled? just proceed
 	orr	x23, x23, x0			// record KASLR offset
-	ret	x28				// we must enable KASLR, return
-						// to __enable_mmu()
+	ldp	x29, x30, [sp], #16		// we must enable KASLR, return
+	ret					// to __primary_switch()
 0:
 #endif
 	b	start_kernel
@@ -465,7 +473,7 @@ ENDPROC(__primary_switched)
  * end early head section, begin head code that is also used for
  * hotplug and needs to have the same protections as the text region
  */
-	.section ".text","ax"
+	.section ".idmap.text","ax"
 
 ENTRY(kimage_vaddr)
 	.quad		_text - TEXT_OFFSET
@@ -490,7 +498,7 @@ CPU_LE(	bic	x0, x0, #(1 << 25)	)	// Clear the EE bit for EL2
 CPU_BE(	orr	x0, x0, #(3 << 24)	)	// Set the EE and E0E bits for EL1
 CPU_LE(	bic	x0, x0, #(3 << 24)	)	// Clear the EE and E0E bits for EL1
 	msr	sctlr_el1, x0
-	mov	w20, #BOOT_CPU_MODE_EL1		// This cpu booted in EL1
+	mov	w0, #BOOT_CPU_MODE_EL1		// This cpu booted in EL1
 	isb
 	ret
 
@@ -586,7 +594,7 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 
 	cbz	x2, install_el2_stub
 
-	mov	w20, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
+	mov	w0, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
 	isb
 	ret
 
@@ -601,7 +609,7 @@ install_el2_stub:
 		      PSR_MODE_EL1h)
 	msr	spsr_el2, x0
 	msr	elr_el2, lr
-	mov	w20, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
+	mov	w0, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
 	eret
 ENDPROC(el2_setup)
 
@@ -611,27 +619,39 @@ ENDPROC(el2_setup)
  */
 set_cpu_boot_mode_flag:
 	adr_l	x1, __boot_cpu_mode
-	cmp	w20, #BOOT_CPU_MODE_EL2
+	cmp	w0, #BOOT_CPU_MODE_EL2
 	b.ne	1f
 	add	x1, x1, #4
-1:	str	w20, [x1]			// This CPU has booted in EL1
+1:	str	w0, [x1]			// This CPU has booted in EL1
 	dmb	sy
 	dc	ivac, x1			// Invalidate potentially stale cache line
 	ret
 ENDPROC(set_cpu_boot_mode_flag)
 
 /*
+ * These values are written with the MMU off, but read with the MMU on.
+ * Writers will invalidate the corresponding address, discarding up to a
+ * 'Cache Writeback Granule' (CWG) worth of data. The linker script ensures
+ * sufficient alignment that the CWG doesn't overlap another section.
+ */
+	.pushsection ".mmuoff.data.write", "aw"
+/*
  * We need to find out the CPU boot mode long after boot, so we need to
  * store it in a writable variable.
  *
  * This is not in .bss, because we set it sufficiently early that the boot-time
  * zeroing of .bss would clobber it.
  */
-	.pushsection	.data..cacheline_aligned
-	.align	L1_CACHE_SHIFT
 ENTRY(__boot_cpu_mode)
 	.long	BOOT_CPU_MODE_EL2
 	.long	BOOT_CPU_MODE_EL1
+/*
+ * The booting CPU updates the failed status @__early_cpu_boot_status,
+ * with MMU turned off.
+ */
+ENTRY(__early_cpu_boot_status)
+	.long 	0
+
 	.popsection
 
 	/*
@@ -639,7 +659,7 @@ ENTRY(__boot_cpu_mode)
 	 * cores are held until we're ready for them to initialise.
 	 */
 ENTRY(secondary_holding_pen)
-	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
+	bl	el2_setup			// Drop to EL1, w0=cpu_boot_mode
 	bl	set_cpu_boot_mode_flag
 	mrs	x0, mpidr_el1
 	mov_q	x1, MPIDR_HWID_BITMASK
@@ -666,12 +686,10 @@ secondary_startup:
 	/*
 	 * Common entry point for secondary CPUs.
 	 */
-	adrp	x25, idmap_pg_dir
-	adrp	x26, swapper_pg_dir
 	bl	__cpu_setup			// initialise processor
-
-	adr_l	x27, __secondary_switch		// address to jump to after enabling the MMU
-	b	__enable_mmu
+	bl	__enable_mmu
+	ldr	x8, =__secondary_switched
+	br	x8
 ENDPROC(secondary_startup)
 
 __secondary_switched:
@@ -706,33 +724,27 @@ ENDPROC(__secondary_switched)
 	dc	ivac, \tmp1			// Invalidate potentially stale cache line
 	.endm
 
-	.pushsection	.data..cacheline_aligned
-	.align	L1_CACHE_SHIFT
-ENTRY(__early_cpu_boot_status)
-	.long 	0
-	.popsection
-
 /*
  * Enable the MMU.
  *
  *  x0  = SCTLR_EL1 value for turning on the MMU.
- *  x27 = *virtual* address to jump to upon completion
  *
- * Other registers depend on the function called upon completion.
+ * Returns to the caller via x30/lr. This requires the caller to be covered
+ * by the .idmap.text section.
  *
  * Checks if the selected granule size is supported by the CPU.
  * If it isn't, park the CPU
  */
-	.section	".idmap.text", "ax"
 ENTRY(__enable_mmu)
-	mrs	x22, sctlr_el1			// preserve old SCTLR_EL1 value
 	mrs	x1, ID_AA64MMFR0_EL1
 	ubfx	x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4
 	cmp	x2, #ID_AA64MMFR0_TGRAN_SUPPORTED
 	b.ne	__no_granule_support
 	update_early_cpu_boot_status 0, x1, x2
-	msr	ttbr0_el1, x25			// load TTBR0
-	msr	ttbr1_el1, x26			// load TTBR1
+	adrp	x1, idmap_pg_dir
+	adrp	x2, swapper_pg_dir
+	msr	ttbr0_el1, x1			// load TTBR0
+	msr	ttbr1_el1, x2			// load TTBR1
 	isb
 	msr	sctlr_el1, x0
 	isb
@@ -744,29 +756,7 @@ ENTRY(__enable_mmu)
 	ic	iallu
 	dsb	nsh
 	isb
-#ifdef CONFIG_RANDOMIZE_BASE
-	mov	x19, x0				// preserve new SCTLR_EL1 value
-	blr	x27
-
-	/*
-	 * If we return here, we have a KASLR displacement in x23 which we need
-	 * to take into account by discarding the current kernel mapping and
-	 * creating a new one.
-	 */
-	msr	sctlr_el1, x22			// disable the MMU
-	isb
-	bl	__create_page_tables		// recreate kernel mapping
-
-	tlbi	vmalle1				// Remove any stale TLB entries
-	dsb	nsh
-
-	msr	sctlr_el1, x19			// re-enable the MMU
-	isb
-	ic	iallu				// flush instructions fetched
-	dsb	nsh				// via old mapping
-	isb
-#endif
-	br	x27
+	ret
 ENDPROC(__enable_mmu)
 
 __no_granule_support:
@@ -775,11 +765,11 @@ __no_granule_support:
 1:
 	wfe
 	wfi
-	b 1b
+	b	1b
 ENDPROC(__no_granule_support)
 
-__primary_switch:
 #ifdef CONFIG_RELOCATABLE
+__relocate_kernel:
 	/*
 	 * Iterate over each entry in the relocation table, and apply the
 	 * relocations in place.
@@ -801,14 +791,46 @@ __primary_switch:
 	add	x13, x13, x23			// relocate
 	str	x13, [x11, x23]
 	b	0b
+1:	ret
+ENDPROC(__relocate_kernel)
+#endif
 
-1:
+__primary_switch:
+#ifdef CONFIG_RANDOMIZE_BASE
+	mov	x19, x0				// preserve new SCTLR_EL1 value
+	mrs	x20, sctlr_el1			// preserve old SCTLR_EL1 value
 #endif
+
+	bl	__enable_mmu
+#ifdef CONFIG_RELOCATABLE
+	bl	__relocate_kernel
+#ifdef CONFIG_RANDOMIZE_BASE
 	ldr	x8, =__primary_switched
-	br	x8
-ENDPROC(__primary_switch)
+	adrp	x0, __PHYS_OFFSET
+	blr	x8
 
-__secondary_switch:
-	ldr	x8, =__secondary_switched
+	/*
+	 * If we return here, we have a KASLR displacement in x23 which we need
+	 * to take into account by discarding the current kernel mapping and
+	 * creating a new one.
+	 */
+	msr	sctlr_el1, x20			// disable the MMU
+	isb
+	bl	__create_page_tables		// recreate kernel mapping
+
+	tlbi	vmalle1				// Remove any stale TLB entries
+	dsb	nsh
+
+	msr	sctlr_el1, x19			// re-enable the MMU
+	isb
+	ic	iallu				// flush instructions fetched
+	dsb	nsh				// via old mapping
+	isb
+
+	bl	__relocate_kernel
+#endif
+#endif
+	ldr	x8, =__primary_switched
+	adrp	x0, __PHYS_OFFSET
 	br	x8
-ENDPROC(__secondary_switch)
+ENDPROC(__primary_switch)
diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S
index 46f29b6..e56d848 100644
--- a/arch/arm64/kernel/hibernate-asm.S
+++ b/arch/arm64/kernel/hibernate-asm.S
@@ -36,8 +36,8 @@
 .macro break_before_make_ttbr_switch zero_page, page_table
 	msr	ttbr1_el1, \zero_page
 	isb
-	tlbi	vmalle1is
-	dsb	ish
+	tlbi	vmalle1
+	dsb	nsh
 	msr	ttbr1_el1, \page_table
 	isb
 .endm
@@ -96,7 +96,7 @@ ENTRY(swsusp_arch_suspend_exit)
 
 	add	x1, x10, #PAGE_SIZE
 	/* Clean the copied page to PoU - based on flush_icache_range() */
-	dcache_line_size x2, x3
+	raw_dcache_line_size x2, x3
 	sub	x3, x2, #1
 	bic	x4, x10, x3
 2:	dc	cvau, x4	/* clean D line / unified line */
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index 65d81f9..d55a7b0 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -15,9 +15,9 @@
  * License terms: GNU General Public License (GPL) version 2
  */
 #define pr_fmt(x) "hibernate: " x
+#include <linux/cpu.h>
 #include <linux/kvm_host.h>
 #include <linux/mm.h>
-#include <linux/notifier.h>
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/suspend.h>
@@ -26,6 +26,7 @@
 
 #include <asm/barrier.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/irqflags.h>
 #include <asm/memory.h>
 #include <asm/mmu_context.h>
@@ -34,6 +35,7 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/sections.h>
 #include <asm/smp.h>
+#include <asm/smp_plat.h>
 #include <asm/suspend.h>
 #include <asm/sysreg.h>
 #include <asm/virt.h>
@@ -54,12 +56,6 @@ extern int in_suspend;
 /* Do we need to reset el2? */
 #define el2_reset_needed() (is_hyp_mode_available() && !is_kernel_in_hyp_mode())
 
-/*
- * Start/end of the hibernate exit code, this must be copied to a 'safe'
- * location in memory, and executed from there.
- */
-extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
-
 /* temporary el2 vectors in the __hibernate_exit_text section. */
 extern char hibernate_el2_vectors[];
 
@@ -67,6 +63,12 @@ extern char hibernate_el2_vectors[];
 extern char __hyp_stub_vectors[];
 
 /*
+ * The logical cpu number we should resume on, initialised to a non-cpu
+ * number.
+ */
+static int sleep_cpu = -EINVAL;
+
+/*
  * Values that may not change over hibernate/resume. We put the build number
  * and date in here so that we guarantee not to resume with a different
  * kernel.
@@ -88,6 +90,8 @@ static struct arch_hibernate_hdr {
 	 * re-configure el2.
 	 */
 	phys_addr_t	__hyp_stub_vectors;
+
+	u64		sleep_cpu_mpidr;
 } resume_hdr;
 
 static inline void arch_hdr_invariants(struct arch_hibernate_hdr_invariants *i)
@@ -130,12 +134,22 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
 	else
 		hdr->__hyp_stub_vectors = 0;
 
+	/* Save the mpidr of the cpu we called cpu_suspend() on... */
+	if (sleep_cpu < 0) {
+		pr_err("Failing to hibernate on an unkown CPU.\n");
+		return -ENODEV;
+	}
+	hdr->sleep_cpu_mpidr = cpu_logical_map(sleep_cpu);
+	pr_info("Hibernating on CPU %d [mpidr:0x%llx]\n", sleep_cpu,
+		hdr->sleep_cpu_mpidr);
+
 	return 0;
 }
 EXPORT_SYMBOL(arch_hibernation_header_save);
 
 int arch_hibernation_header_restore(void *addr)
 {
+	int ret;
 	struct arch_hibernate_hdr_invariants invariants;
 	struct arch_hibernate_hdr *hdr = addr;
 
@@ -145,6 +159,24 @@ int arch_hibernation_header_restore(void *addr)
 		return -EINVAL;
 	}
 
+	sleep_cpu = get_logical_index(hdr->sleep_cpu_mpidr);
+	pr_info("Hibernated on CPU %d [mpidr:0x%llx]\n", sleep_cpu,
+		hdr->sleep_cpu_mpidr);
+	if (sleep_cpu < 0) {
+		pr_crit("Hibernated on a CPU not known to this kernel!\n");
+		sleep_cpu = -EINVAL;
+		return -EINVAL;
+	}
+	if (!cpu_online(sleep_cpu)) {
+		pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n");
+		ret = cpu_up(sleep_cpu);
+		if (ret) {
+			pr_err("Failed to bring hibernate-CPU up!\n");
+			sleep_cpu = -EINVAL;
+			return ret;
+		}
+	}
+
 	resume_hdr = *hdr;
 
 	return 0;
@@ -241,6 +273,7 @@ out:
 	return rc;
 }
 
+#define dcache_clean_range(start, end)	__flush_dcache_area(start, (end - start))
 
 int swsusp_arch_suspend(void)
 {
@@ -256,10 +289,16 @@ int swsusp_arch_suspend(void)
 	local_dbg_save(flags);
 
 	if (__cpu_suspend_enter(&state)) {
+		sleep_cpu = smp_processor_id();
 		ret = swsusp_save();
 	} else {
-		/* Clean kernel to PoC for secondary core startup */
-		__flush_dcache_area(LMADDR(KERNEL_START), KERNEL_END - KERNEL_START);
+		/* Clean kernel core startup/idle code to PoC*/
+		dcache_clean_range(__mmuoff_data_start, __mmuoff_data_end);
+		dcache_clean_range(__idmap_text_start, __idmap_text_end);
+
+		/* Clean kvm setup code to PoC? */
+		if (el2_reset_needed())
+			dcache_clean_range(__hyp_idmap_text_start, __hyp_idmap_text_end);
 
 		/*
 		 * Tell the hibernation core that we've just restored
@@ -267,6 +306,7 @@ int swsusp_arch_suspend(void)
 		 */
 		in_suspend = 0;
 
+		sleep_cpu = -EINVAL;
 		__cpu_suspend_exit();
 	}
 
@@ -275,6 +315,33 @@ int swsusp_arch_suspend(void)
 	return ret;
 }
 
+static void _copy_pte(pte_t *dst_pte, pte_t *src_pte, unsigned long addr)
+{
+	pte_t pte = *src_pte;
+
+	if (pte_valid(pte)) {
+		/*
+		 * Resume will overwrite areas that may be marked
+		 * read only (code, rodata). Clear the RDONLY bit from
+		 * the temporary mappings we use during restore.
+		 */
+		set_pte(dst_pte, pte_clear_rdonly(pte));
+	} else if (debug_pagealloc_enabled() && !pte_none(pte)) {
+		/*
+		 * debug_pagealloc will removed the PTE_VALID bit if
+		 * the page isn't in use by the resume kernel. It may have
+		 * been in use by the original kernel, in which case we need
+		 * to put it back in our copy to do the restore.
+		 *
+		 * Before marking this entry valid, check the pfn should
+		 * be mapped.
+		 */
+		BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+		set_pte(dst_pte, pte_mkpresent(pte_clear_rdonly(pte)));
+	}
+}
+
 static int copy_pte(pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long start,
 		    unsigned long end)
 {
@@ -290,13 +357,7 @@ static int copy_pte(pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long start,
 
 	src_pte = pte_offset_kernel(src_pmd, start);
 	do {
-		if (!pte_none(*src_pte))
-			/*
-			 * Resume will overwrite areas that may be marked
-			 * read only (code, rodata). Clear the RDONLY bit from
-			 * the temporary mappings we use during restore.
-			 */
-			set_pte(dst_pte, __pte(pte_val(*src_pte) & ~PTE_RDONLY));
+		_copy_pte(dst_pte, src_pte, addr);
 	} while (dst_pte++, src_pte++, addr += PAGE_SIZE, addr != end);
 
 	return 0;
@@ -483,27 +544,12 @@ out:
 	return rc;
 }
 
-static int check_boot_cpu_online_pm_callback(struct notifier_block *nb,
-					     unsigned long action, void *ptr)
+int hibernate_resume_nonboot_cpu_disable(void)
 {
-	if (action == PM_HIBERNATION_PREPARE &&
-	     cpumask_first(cpu_online_mask) != 0) {
-		pr_warn("CPU0 is offline.\n");
-		return notifier_from_errno(-ENODEV);
+	if (sleep_cpu < 0) {
+		pr_err("Failing to resume from hibernate on an unkown CPU.\n");
+		return -ENODEV;
 	}
 
-	return NOTIFY_OK;
-}
-
-static int __init check_boot_cpu_online_init(void)
-{
-	/*
-	 * Set this pm_notifier callback with a lower priority than
-	 * cpu_hotplug_pm_callback, so that cpu_hotplug_pm_callback will be
-	 * called earlier to disable cpu hotplug before the cpu online check.
-	 */
-	pm_notifier(check_boot_cpu_online_pm_callback, -INT_MAX);
-
-	return 0;
+	return freeze_secondary_cpus(sleep_cpu);
 }
-core_initcall(check_boot_cpu_online_init);
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index 26a6bf7..948b731 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -857,7 +857,7 @@ void hw_breakpoint_thread_switch(struct task_struct *next)
 /*
  * CPU initialisation.
  */
-static void hw_breakpoint_reset(void *unused)
+static int hw_breakpoint_reset(unsigned int cpu)
 {
 	int i;
 	struct perf_event **slots;
@@ -888,28 +888,14 @@ static void hw_breakpoint_reset(void *unused)
 			write_wb_reg(AARCH64_DBG_REG_WVR, i, 0UL);
 		}
 	}
-}
 
-static int hw_breakpoint_reset_notify(struct notifier_block *self,
-						unsigned long action,
-						void *hcpu)
-{
-	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) {
-		local_irq_disable();
-		hw_breakpoint_reset(NULL);
-		local_irq_enable();
-	}
-	return NOTIFY_OK;
+	return 0;
 }
 
-static struct notifier_block hw_breakpoint_reset_nb = {
-	.notifier_call = hw_breakpoint_reset_notify,
-};
-
 #ifdef CONFIG_CPU_PM
-extern void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *));
+extern void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int));
 #else
-static inline void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
+static inline void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int))
 {
 }
 #endif
@@ -919,36 +905,34 @@ static inline void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
  */
 static int __init arch_hw_breakpoint_init(void)
 {
+	int ret;
+
 	core_num_brps = get_num_brps();
 	core_num_wrps = get_num_wrps();
 
 	pr_info("found %d breakpoint and %d watchpoint registers.\n",
 		core_num_brps, core_num_wrps);
 
-	cpu_notifier_register_begin();
-
-	/*
-	 * Reset the breakpoint resources. We assume that a halting
-	 * debugger will leave the world in a nice state for us.
-	 */
-	smp_call_function(hw_breakpoint_reset, NULL, 1);
-	hw_breakpoint_reset(NULL);
-
 	/* Register debug fault handlers. */
 	hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP,
 			      TRAP_HWBKPT, "hw-breakpoint handler");
 	hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP,
 			      TRAP_HWBKPT, "hw-watchpoint handler");
 
-	/* Register hotplug notifier. */
-	__register_cpu_notifier(&hw_breakpoint_reset_nb);
-
-	cpu_notifier_register_done();
+	/*
+	 * Reset the breakpoint resources. We assume that a halting
+	 * debugger will leave the world in a nice state for us.
+	 */
+	ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
+			  "CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING",
+			  hw_breakpoint_reset, NULL);
+	if (ret)
+		pr_err("failed to register CPU hotplug notifier: %d\n", ret);
 
 	/* Register cpu_suspend hw breakpoint restore hook */
 	cpu_suspend_set_dbg_restorer(hw_breakpoint_reset);
 
-	return 0;
+	return ret;
 }
 arch_initcall(arch_hw_breakpoint_init);
 
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index 63f9432..6f2ac4f 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -96,7 +96,7 @@ static void __kprobes *patch_map(void *addr, int fixmap)
 
 	if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX))
 		page = vmalloc_to_page(addr);
-	else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA))
+	else if (!module)
 		page = pfn_to_page(PHYS_PFN(__pa(addr)));
 	else
 		return addr;
@@ -1202,6 +1202,19 @@ u32 aarch64_set_branch_offset(u32 insn, s32 offset)
 	BUG();
 }
 
+s32 aarch64_insn_adrp_get_offset(u32 insn)
+{
+	BUG_ON(!aarch64_insn_is_adrp(insn));
+	return aarch64_insn_decode_immediate(AARCH64_INSN_IMM_ADR, insn) << 12;
+}
+
+u32 aarch64_insn_adrp_set_offset(u32 insn, s32 offset)
+{
+	BUG_ON(!aarch64_insn_is_adrp(insn));
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_ADR, insn,
+						offset >> 12);
+}
+
 /*
  * Extract the Op/CR data from a msr/mrs instruction.
  */
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
index b054691..769f24e 100644
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/cache.h>
 #include <linux/crc32.h>
 #include <linux/init.h>
 #include <linux/libfdt.h>
@@ -20,7 +21,7 @@
 #include <asm/pgtable.h>
 #include <asm/sections.h>
 
-u64 __read_mostly module_alloc_base;
+u64 __ro_after_init module_alloc_base;
 u16 __initdata memstart_offset_seed;
 
 static __init u64 get_kaslr_seed(void *fdt)
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index 8c57f64..e017a94 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -19,10 +19,13 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/bug.h>
 #include <linux/irq.h>
 #include <linux/kdebug.h>
 #include <linux/kgdb.h>
 #include <linux/kprobes.h>
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
 #include <asm/traps.h>
 
 struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
@@ -338,15 +341,24 @@ void kgdb_arch_exit(void)
 	unregister_die_notifier(&kgdb_notifier);
 }
 
-/*
- * ARM instructions are always in LE.
- * Break instruction is encoded in LE format
- */
-struct kgdb_arch arch_kgdb_ops = {
-	.gdb_bpt_instr = {
-		KGDB_DYN_BRK_INS_BYTE(0),
-		KGDB_DYN_BRK_INS_BYTE(1),
-		KGDB_DYN_BRK_INS_BYTE(2),
-		KGDB_DYN_BRK_INS_BYTE(3),
-	}
-};
+struct kgdb_arch arch_kgdb_ops;
+
+int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
+{
+	int err;
+
+	BUILD_BUG_ON(AARCH64_INSN_SIZE != BREAK_INSTR_SIZE);
+
+	err = aarch64_insn_read((void *)bpt->bpt_addr, (u32 *)bpt->saved_instr);
+	if (err)
+		return err;
+
+	return aarch64_insn_write((void *)bpt->bpt_addr,
+			(u32)AARCH64_BREAK_KGDB_DYN_DBG);
+}
+
+int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
+{
+	return aarch64_insn_write((void *)bpt->bpt_addr,
+			*(u32 *)bpt->saved_instr);
+}
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 838ccf1..a9310a6 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -24,6 +24,7 @@
 #include <asm/sysreg.h>
 #include <asm/virt.h>
 
+#include <linux/acpi.h>
 #include <linux/of.h>
 #include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
@@ -190,13 +191,23 @@
 #define ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_MISS		0xED
 
 /* PMUv3 HW events mapping. */
+
+/*
+ * ARMv8 Architectural defined events, not all of these may
+ * be supported on any given implementation. Undefined events will
+ * be disabled at run-time.
+ */
 static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
 	PERF_MAP_ALL_UNSUPPORTED,
 	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INST_RETIRED,
 	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV8_PMUV3_PERFCTR_L1D_CACHE,
 	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED,
 	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV8_PMUV3_PERFCTR_BR_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV8_PMUV3_PERFCTR_BUS_CYCLES,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= ARMV8_PMUV3_PERFCTR_STALL_FRONTEND,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV8_PMUV3_PERFCTR_STALL_BACKEND,
 };
 
 /* ARM Cortex-A53 HW events mapping. */
@@ -258,6 +269,15 @@ static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1D_CACHE,
 	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL,
 
+	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1I_CACHE,
+	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL,
+
+	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL,
+	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1D_TLB,
+
+	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL,
+	[C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1I_TLB,
+
 	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_BR_PRED,
 	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_BR_MIS_PRED,
 	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_BR_PRED,
@@ -523,12 +543,6 @@ static struct attribute_group armv8_pmuv3_format_attr_group = {
 	.attrs = armv8_pmuv3_format_attrs,
 };
 
-static const struct attribute_group *armv8_pmuv3_attr_groups[] = {
-	&armv8_pmuv3_events_attr_group,
-	&armv8_pmuv3_format_attr_group,
-	NULL,
-};
-
 /*
  * Perf Events' indices
  */
@@ -905,9 +919,22 @@ static void armv8pmu_reset(void *info)
 
 static int armv8_pmuv3_map_event(struct perf_event *event)
 {
-	return armpmu_map_event(event, &armv8_pmuv3_perf_map,
-				&armv8_pmuv3_perf_cache_map,
-				ARMV8_PMU_EVTYPE_EVENT);
+	int hw_event_id;
+	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+
+	hw_event_id = armpmu_map_event(event, &armv8_pmuv3_perf_map,
+				       &armv8_pmuv3_perf_cache_map,
+				       ARMV8_PMU_EVTYPE_EVENT);
+	if (hw_event_id < 0)
+		return hw_event_id;
+
+	/* disable micro/arch events not supported by this PMU */
+	if ((hw_event_id < ARMV8_PMUV3_MAX_COMMON_EVENTS) &&
+		!test_bit(hw_event_id, armpmu->pmceid_bitmap)) {
+			return -EOPNOTSUPP;
+	}
+
+	return hw_event_id;
 }
 
 static int armv8_a53_map_event(struct perf_event *event)
@@ -985,7 +1012,10 @@ static int armv8_pmuv3_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_pmuv3";
 	cpu_pmu->map_event		= armv8_pmuv3_map_event;
-	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv8_pmuv3_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv8_pmuv3_format_attr_group;
 	return armv8pmu_probe_pmu(cpu_pmu);
 }
 
@@ -994,7 +1024,10 @@ static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_cortex_a53";
 	cpu_pmu->map_event		= armv8_a53_map_event;
-	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv8_pmuv3_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv8_pmuv3_format_attr_group;
 	return armv8pmu_probe_pmu(cpu_pmu);
 }
 
@@ -1003,7 +1036,10 @@ static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_cortex_a57";
 	cpu_pmu->map_event		= armv8_a57_map_event;
-	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv8_pmuv3_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv8_pmuv3_format_attr_group;
 	return armv8pmu_probe_pmu(cpu_pmu);
 }
 
@@ -1012,7 +1048,10 @@ static int armv8_a72_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_cortex_a72";
 	cpu_pmu->map_event		= armv8_a57_map_event;
-	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv8_pmuv3_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv8_pmuv3_format_attr_group;
 	return armv8pmu_probe_pmu(cpu_pmu);
 }
 
@@ -1021,7 +1060,10 @@ static int armv8_thunder_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_cavium_thunder";
 	cpu_pmu->map_event		= armv8_thunder_map_event;
-	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv8_pmuv3_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv8_pmuv3_format_attr_group;
 	return armv8pmu_probe_pmu(cpu_pmu);
 }
 
@@ -1030,7 +1072,10 @@ static int armv8_vulcan_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_brcm_vulcan";
 	cpu_pmu->map_event		= armv8_vulcan_map_event;
-	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
+		&armv8_pmuv3_events_attr_group;
+	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] =
+		&armv8_pmuv3_format_attr_group;
 	return armv8pmu_probe_pmu(cpu_pmu);
 }
 
@@ -1044,21 +1089,32 @@ static const struct of_device_id armv8_pmu_of_device_ids[] = {
 	{},
 };
 
+/*
+ * Non DT systems have their micro/arch events probed at run-time.
+ * A fairly complete list of generic events are provided and ones that
+ * aren't supported by the current PMU are disabled.
+ */
+static const struct pmu_probe_info armv8_pmu_probe_table[] = {
+	PMU_PROBE(0, 0, armv8_pmuv3_init), /* enable all defined counters */
+	{ /* sentinel value */ }
+};
+
 static int armv8_pmu_device_probe(struct platform_device *pdev)
 {
-	return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, NULL);
+	if (acpi_disabled)
+		return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids,
+					    NULL);
+
+	return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids,
+				    armv8_pmu_probe_table);
 }
 
 static struct platform_driver armv8_pmu_driver = {
 	.driver		= {
-		.name	= "armv8-pmu",
+		.name	= ARMV8_PMU_PDEV_NAME,
 		.of_match_table = armv8_pmu_of_device_ids,
 	},
 	.probe		= armv8_pmu_device_probe,
 };
 
-static int __init register_armv8_pmu_driver(void)
-{
-	return platform_driver_register(&armv8_pmu_driver);
-}
-device_initcall(register_armv8_pmu_driver);
+builtin_platform_driver(armv8_pmu_driver);
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 37e47a9..d1731bf 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/kallsyms.h>
 #include <asm/kprobes.h>
 #include <asm/insn.h>
 #include <asm/sections.h>
@@ -122,7 +123,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 static bool __kprobes
 is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
 {
-	while (scan_start > scan_end) {
+	while (scan_start >= scan_end) {
 		/*
 		 * atomic region starts from exclusive load and ends with
 		 * exclusive store.
@@ -142,33 +143,30 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
 {
 	enum kprobe_insn decoded;
 	kprobe_opcode_t insn = le32_to_cpu(*addr);
-	kprobe_opcode_t *scan_start = addr - 1;
-	kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
-#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
-	struct module *mod;
-#endif
-
-	if (addr >= (kprobe_opcode_t *)_text &&
-	    scan_end < (kprobe_opcode_t *)_text)
-		scan_end = (kprobe_opcode_t *)_text;
-#if defined(CONFIG_MODULES) && defined(MODULES_VADDR)
-	else {
-		preempt_disable();
-		mod = __module_address((unsigned long)addr);
-		if (mod && within_module_init((unsigned long)addr, mod) &&
-			!within_module_init((unsigned long)scan_end, mod))
-			scan_end = (kprobe_opcode_t *)mod->init_layout.base;
-		else if (mod && within_module_core((unsigned long)addr, mod) &&
-			!within_module_core((unsigned long)scan_end, mod))
-			scan_end = (kprobe_opcode_t *)mod->core_layout.base;
-		preempt_enable();
+	kprobe_opcode_t *scan_end = NULL;
+	unsigned long size = 0, offset = 0;
+
+	/*
+	 * If there's a symbol defined in front of and near enough to
+	 * the probe address assume it is the entry point to this
+	 * code and use it to further limit how far back we search
+	 * when determining if we're in an atomic sequence. If we could
+	 * not find any symbol skip the atomic test altogether as we
+	 * could otherwise end up searching irrelevant text/literals.
+	 * KPROBES depends on KALLSYMS so this last case should never
+	 * happen.
+	 */
+	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
+		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
+			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
+		else
+			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
 	}
-#endif
 	decoded = arm_probe_decode_insn(insn, asi);
 
-	if (decoded == INSN_REJECTED ||
-			is_probed_address_atomic(scan_start, scan_end))
-		return INSN_REJECTED;
+	if (decoded != INSN_REJECTED && scan_end)
+		if (is_probed_address_atomic(addr - 1, scan_end))
+			return INSN_REJECTED;
 
 	return decoded;
 }
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index c6b0f40..f5077ea 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -19,7 +19,7 @@
 #include <linux/kasan.h>
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/slab.h>
 #include <linux/stop_machine.h>
 #include <linux/stringify.h>
@@ -31,7 +31,7 @@
 #include <asm/insn.h>
 #include <asm/uaccess.h>
 #include <asm/irq.h>
-#include <asm-generic/sections.h>
+#include <asm/sections.h>
 
 #include "decode-insn.h"
 
@@ -166,13 +166,18 @@ static void __kprobes set_current_kprobe(struct kprobe *p)
 }
 
 /*
- * The D-flag (Debug mask) is set (masked) upon debug exception entry.
- * Kprobes needs to clear (unmask) D-flag -ONLY- in case of recursive
- * probe i.e. when probe hit from kprobe handler context upon
- * executing the pre/post handlers. In this case we return with
- * D-flag clear so that single-stepping can be carried-out.
- *
- * Leave D-flag set in all other cases.
+ * When PSTATE.D is set (masked), then software step exceptions can not be
+ * generated.
+ * SPSR's D bit shows the value of PSTATE.D immediately before the
+ * exception was taken. PSTATE.D is set while entering into any exception
+ * mode, however software clears it for any normal (none-debug-exception)
+ * mode in the exception entry. Therefore, when we are entering into kprobe
+ * breakpoint handler from any normal mode then SPSR.D bit is already
+ * cleared, however it is set when we are entering from any debug exception
+ * mode.
+ * Since we always need to generate single step exception after a kprobe
+ * breakpoint exception therefore we need to clear it unconditionally, when
+ * we become sure that the current breakpoint exception is for kprobe.
  */
 static void __kprobes
 spsr_set_debug_flag(struct pt_regs *regs, int mask)
@@ -245,10 +250,7 @@ static void __kprobes setup_singlestep(struct kprobe *p,
 
 		set_ss_context(kcb, slot);	/* mark pending ss */
 
-		if (kcb->kprobe_status == KPROBE_REENTER)
-			spsr_set_debug_flag(regs, 0);
-		else
-			WARN_ON(regs->pstate & PSR_D_BIT);
+		spsr_set_debug_flag(regs, 0);
 
 		/* IRQs and single stepping do not mix well. */
 		kprobes_save_local_irqflag(kcb, regs);
@@ -333,8 +335,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 			BUG();
 
 		kernel_disable_single_step();
-		if (kcb->kprobe_status == KPROBE_REENTER)
-			spsr_set_debug_flag(regs, 1);
 
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
@@ -457,9 +457,6 @@ kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr)
 		kprobes_restore_local_irqflag(kcb, regs);
 		kernel_disable_single_step();
 
-		if (kcb->kprobe_status == KPROBE_REENTER)
-			spsr_set_debug_flag(regs, 1);
-
 		post_kprobe_handler(kcb, regs);
 	}
 
@@ -543,9 +540,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 
 bool arch_within_kprobe_blacklist(unsigned long addr)
 {
-	extern char __idmap_text_start[], __idmap_text_end[];
-	extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
-
 	if ((addr >= (unsigned long)__kprobes_text_start &&
 	    addr < (unsigned long)__kprobes_text_end) ||
 	    (addr >= (unsigned long)__entry_text_start &&
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 6cd2612..27b2f138 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -202,7 +202,7 @@ void show_regs(struct pt_regs * regs)
 
 static void tls_thread_flush(void)
 {
-	asm ("msr tpidr_el0, xzr");
+	write_sysreg(0, tpidr_el0);
 
 	if (is_compat_task()) {
 		current->thread.tp_value = 0;
@@ -213,7 +213,7 @@ static void tls_thread_flush(void)
 		 * with a stale shadow state during context switch.
 		 */
 		barrier();
-		asm ("msr tpidrro_el0, xzr");
+		write_sysreg(0, tpidrro_el0);
 	}
 }
 
@@ -253,7 +253,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 		 * Read the current TLS pointer from tpidr_el0 as it may be
 		 * out-of-sync with the saved value.
 		 */
-		asm("mrs %0, tpidr_el0" : "=r" (*task_user_tls(p)));
+		*task_user_tls(p) = read_sysreg(tpidr_el0);
 
 		if (stack_start) {
 			if (is_compat_thread(task_thread_info(p)))
@@ -289,17 +289,15 @@ static void tls_thread_switch(struct task_struct *next)
 {
 	unsigned long tpidr, tpidrro;
 
-	asm("mrs %0, tpidr_el0" : "=r" (tpidr));
+	tpidr = read_sysreg(tpidr_el0);
 	*task_user_tls(current) = tpidr;
 
 	tpidr = *task_user_tls(next);
 	tpidrro = is_compat_thread(task_thread_info(next)) ?
 		  next->thread.tp_value : 0;
 
-	asm(
-	"	msr	tpidr_el0, %0\n"
-	"	msr	tpidrro_el0, %1"
-	: : "r" (tpidr), "r" (tpidrro));
+	write_sysreg(tpidr, tpidr_el0);
+	write_sysreg(tpidrro, tpidrro_el0);
 }
 
 /* Restore the UAO state depending on next's addr_limit */
@@ -374,12 +372,8 @@ unsigned long arch_align_stack(unsigned long sp)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk;
-
 	if (is_compat_task())
-		range_end += 0x02000000;
+		return randomize_page(mm->brk, 0x02000000);
 	else
-		range_end += 0x40000000;
-
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+		return randomize_page(mm->brk, 0x40000000);
 }
diff --git a/arch/arm64/kernel/relocate_kernel.S b/arch/arm64/kernel/relocate_kernel.S
index 51b73cd..ce704a4 100644
--- a/arch/arm64/kernel/relocate_kernel.S
+++ b/arch/arm64/kernel/relocate_kernel.S
@@ -34,7 +34,7 @@ ENTRY(arm64_relocate_new_kernel)
 	/* Setup the list loop variables. */
 	mov	x17, x1				/* x17 = kimage_start */
 	mov	x16, x0				/* x16 = kimage_head */
-	dcache_line_size x15, x0		/* x15 = dcache line size */
+	raw_dcache_line_size x15, x0		/* x15 = dcache line size */
 	mov	x14, xzr			/* x14 = entry ptr */
 	mov	x13, xzr			/* x13 = copy dest */
 
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 536dce2..f534f49 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -206,10 +206,15 @@ static void __init request_standard_resources(void)
 
 	for_each_memblock(memory, region) {
 		res = alloc_bootmem_low(sizeof(*res));
-		res->name  = "System RAM";
+		if (memblock_is_nomap(region)) {
+			res->name  = "reserved";
+			res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		} else {
+			res->name  = "System RAM";
+			res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
+		}
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 
@@ -228,7 +233,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id());
 
-	sprintf(init_utsname()->machine, ELF_PLATFORM);
+	sprintf(init_utsname()->machine, UTS_MACHINE);
 	init_mm.start_code = (unsigned long) _text;
 	init_mm.end_code   = (unsigned long) _etext;
 	init_mm.end_data   = (unsigned long) _edata;
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index a8eafdb..404dd67 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -402,15 +402,31 @@ static void do_signal(struct pt_regs *regs)
 asmlinkage void do_notify_resume(struct pt_regs *regs,
 				 unsigned int thread_flags)
 {
-	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(regs);
-
-	if (thread_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-
-	if (thread_flags & _TIF_FOREIGN_FPSTATE)
-		fpsimd_restore_current_state();
+	/*
+	 * The assembly code enters us with IRQs off, but it hasn't
+	 * informed the tracing code of that for efficiency reasons.
+	 * Update the trace code with the current status.
+	 */
+	trace_hardirqs_off();
+	do {
+		if (thread_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			local_irq_enable();
+
+			if (thread_flags & _TIF_SIGPENDING)
+				do_signal(regs);
+
+			if (thread_flags & _TIF_NOTIFY_RESUME) {
+				clear_thread_flag(TIF_NOTIFY_RESUME);
+				tracehook_notify_resume(regs);
+			}
+
+			if (thread_flags & _TIF_FOREIGN_FPSTATE)
+				fpsimd_restore_current_state();
+		}
 
+		local_irq_disable();
+		thread_flags = READ_ONCE(current_thread_info()->flags);
+	} while (thread_flags & _TIF_WORK_MASK);
 }
diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
index ccf79d8..b8799e7 100644
--- a/arch/arm64/kernel/sleep.S
+++ b/arch/arm64/kernel/sleep.S
@@ -73,10 +73,9 @@ ENTRY(__cpu_suspend_enter)
 	str	x2, [x0, #SLEEP_STACK_DATA_SYSTEM_REGS + CPU_CTX_SP]
 
 	/* find the mpidr_hash */
-	ldr	x1, =sleep_save_stash
-	ldr	x1, [x1]
+	ldr_l	x1, sleep_save_stash
 	mrs	x7, mpidr_el1
-	ldr	x9, =mpidr_hash
+	adr_l	x9, mpidr_hash
 	ldr	x10, [x9, #MPIDR_HASH_MASK]
 	/*
 	 * Following code relies on the struct mpidr_hash
@@ -95,36 +94,30 @@ ENTRY(__cpu_suspend_enter)
 	mov	x0, #1
 	ret
 ENDPROC(__cpu_suspend_enter)
-	.ltorg
 
+	.pushsection ".idmap.text", "ax"
 ENTRY(cpu_resume)
 	bl	el2_setup		// if in EL2 drop to EL1 cleanly
+	bl	__cpu_setup
 	/* enable the MMU early - so we can access sleep_save_stash by va */
-	adr_l	lr, __enable_mmu	/* __cpu_setup will return here */
-	adr_l	x27, _resume_switched	/* __enable_mmu will branch here */
-	adrp	x25, idmap_pg_dir
-	adrp	x26, swapper_pg_dir
-	b	__cpu_setup
-ENDPROC(cpu_resume)
-
-	.pushsection	".idmap.text", "ax"
-_resume_switched:
+	bl	__enable_mmu
 	ldr	x8, =_cpu_resume
 	br	x8
-ENDPROC(_resume_switched)
+ENDPROC(cpu_resume)
 	.ltorg
 	.popsection
 
 ENTRY(_cpu_resume)
 	mrs	x1, mpidr_el1
-	adrp	x8, mpidr_hash
-	add x8, x8, #:lo12:mpidr_hash // x8 = struct mpidr_hash phys address
-        /* retrieve mpidr_hash members to compute the hash */
+	adr_l	x8, mpidr_hash		// x8 = struct mpidr_hash virt address
+
+	/* retrieve mpidr_hash members to compute the hash */
 	ldr	x2, [x8, #MPIDR_HASH_MASK]
 	ldp	w3, w4, [x8, #MPIDR_HASH_SHIFTS]
 	ldp	w5, w6, [x8, #(MPIDR_HASH_SHIFTS + 8)]
 	compute_mpidr_hash x7, x3, x4, x5, x6, x1, x2
-        /* x7 contains hash index, let's use it to grab context pointer */
+
+	/* x7 contains hash index, let's use it to grab context pointer */
 	ldr_l	x0, sleep_save_stash
 	ldr	x0, [x0, x7, lsl #3]
 	add	x29, x0, #SLEEP_STACK_DATA_CALLEE_REGS
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index d93d433..d3f151c 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -201,12 +201,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	return ret;
 }
 
-static void smp_store_cpu_info(unsigned int cpuid)
-{
-	store_cpu_topology(cpuid);
-	numa_store_cpu_info(cpuid);
-}
-
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -239,7 +233,7 @@ asmlinkage void secondary_start_kernel(void)
 	 * this CPU ticks all of those. If it doesn't, the CPU will
 	 * fail to come online.
 	 */
-	verify_local_cpu_capabilities();
+	check_local_cpu_capabilities();
 
 	if (cpu_ops[cpu]->cpu_postboot)
 		cpu_ops[cpu]->cpu_postboot();
@@ -254,7 +248,7 @@ asmlinkage void secondary_start_kernel(void)
 	 */
 	notify_cpu_starting(cpu);
 
-	smp_store_cpu_info(cpu);
+	store_cpu_topology(cpu);
 
 	/*
 	 * OK, now it's safe to let the boot CPU continue.  Wait for
@@ -437,8 +431,19 @@ void __init smp_cpus_done(unsigned int max_cpus)
 void __init smp_prepare_boot_cpu(void)
 {
 	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
+	/*
+	 * Initialise the static keys early as they may be enabled by the
+	 * cpufeature code.
+	 */
+	jump_label_init();
 	cpuinfo_store_boot_cpu();
 	save_boot_cpu_run_el();
+	/*
+	 * Run the errata work around checks on the boot CPU, once we have
+	 * initialised the cpu feature infrastructure from
+	 * cpuinfo_store_boot_cpu() above.
+	 */
+	update_cpu_errata_workarounds();
 }
 
 static u64 __init of_get_cpu_mpidr(struct device_node *dn)
@@ -619,6 +624,7 @@ static void __init of_parse_and_init_cpus(void)
 			}
 
 			bootcpu_valid = true;
+			early_map_cpu_to_node(0, of_node_to_nid(dn));
 
 			/*
 			 * cpu_logical_map has already been
@@ -689,10 +695,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	int err;
 	unsigned int cpu;
+	unsigned int this_cpu;
 
 	init_cpu_topology();
 
-	smp_store_cpu_info(smp_processor_id());
+	this_cpu = smp_processor_id();
+	store_cpu_topology(this_cpu);
+	numa_store_cpu_info(this_cpu);
 
 	/*
 	 * If UP is mandated by "nosmp" (which implies "maxcpus=0"), don't set
@@ -719,6 +728,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 			continue;
 
 		set_cpu_present(cpu, true);
+		numa_store_cpu_info(cpu);
 	}
 }
 
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
index 18a71bc..9a00eee 100644
--- a/arch/arm64/kernel/smp_spin_table.c
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -29,7 +29,8 @@
 #include <asm/smp_plat.h>
 
 extern void secondary_holding_pen(void);
-volatile unsigned long secondary_holding_pen_release = INVALID_HWID;
+volatile unsigned long __section(".mmuoff.data.read")
+secondary_holding_pen_release = INVALID_HWID;
 
 static phys_addr_t cpu_release_addr[NR_CPUS];
 
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index d9751a4..c2efddf 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -43,6 +43,9 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 	unsigned long fp = frame->fp;
 	unsigned long irq_stack_ptr;
 
+	if (!tsk)
+		tsk = current;
+
 	/*
 	 * Switching between stacks is valid when tracing current and in
 	 * non-preemptible context.
@@ -67,7 +70,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	if (tsk && tsk->ret_stack &&
+	if (tsk->ret_stack &&
 			(frame->pc == (unsigned long)return_to_handler)) {
 		/*
 		 * This is a case where function graph tracer has
@@ -152,6 +155,27 @@ static int save_trace(struct stackframe *frame, void *d)
 	return trace->nr_entries >= trace->max_entries;
 }
 
+void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
+{
+	struct stack_trace_data data;
+	struct stackframe frame;
+
+	data.trace = trace;
+	data.skip = trace->skip;
+	data.no_sched_functions = 0;
+
+	frame.fp = regs->regs[29];
+	frame.sp = regs->sp;
+	frame.pc = regs->pc;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = current->curr_ret_stack;
+#endif
+
+	walk_stackframe(current, &frame, save_trace, &data);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	struct stack_trace_data data;
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index b616e36..ad73414 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -23,8 +23,8 @@ unsigned long *sleep_save_stash;
  * time the notifier runs debug exceptions might have been enabled already,
  * with HW breakpoints registers content still in an unknown state.
  */
-static void (*hw_breakpoint_restore)(void *);
-void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
+static int (*hw_breakpoint_restore)(unsigned int);
+void __init cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int))
 {
 	/* Prevent multiple restore hook initializations */
 	if (WARN_ON(hw_breakpoint_restore))
@@ -34,6 +34,8 @@ void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
 
 void notrace __cpu_suspend_exit(void)
 {
+	unsigned int cpu = smp_processor_id();
+
 	/*
 	 * We are resuming from reset with the idmap active in TTBR0_EL1.
 	 * We must uninstall the idmap and restore the expected MMU
@@ -45,7 +47,7 @@ void notrace __cpu_suspend_exit(void)
 	 * Restore per-cpu offset before any kernel
 	 * subsystem relying on it has a chance to run.
 	 */
-	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
+	set_my_cpu_offset(per_cpu_offset(cpu));
 
 	/*
 	 * Restore HW breakpoint registers to sane values
@@ -53,7 +55,7 @@ void notrace __cpu_suspend_exit(void)
 	 * through local_dbg_restore.
 	 */
 	if (hw_breakpoint_restore)
-		hw_breakpoint_restore(NULL);
+		hw_breakpoint_restore(cpu);
 }
 
 /*
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index 28c511b..abaf582 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -94,7 +94,7 @@ long compat_arm_syscall(struct pt_regs *regs)
 		 * See comment in tls_thread_flush.
 		 */
 		barrier();
-		asm ("msr tpidrro_el0, %0" : : "r" (regs->regs[0]));
+		write_sysreg(regs->regs[0], tpidrro_el0);
 		return 0;
 
 	default:
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index e04f838..5ff020f 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -142,6 +142,11 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 	unsigned long irq_stack_ptr;
 	int skip;
 
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (!tsk)
+		tsk = current;
+
 	/*
 	 * Switching between stacks is valid when tracing current and in
 	 * non-preemptible context.
@@ -151,11 +156,6 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 	else
 		irq_stack_ptr = 0;
 
-	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
-
-	if (!tsk)
-		tsk = current;
-
 	if (tsk == current) {
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
@@ -447,36 +447,29 @@ void cpu_enable_cache_maint_trap(void *__unused)
 		: "=r" (res)					\
 		: "r" (address), "i" (-EFAULT) )
 
-asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs)
+static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs)
 {
 	unsigned long address;
-	int ret;
-
-	/* if this is a write with: Op0=1, Op2=1, Op1=3, CRn=7 */
-	if ((esr & 0x01fffc01) == 0x0012dc00) {
-		int rt = (esr >> 5) & 0x1f;
-		int crm = (esr >> 1) & 0x0f;
+	int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;
+	int crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT;
+	int ret = 0;
 
-		address = (rt == 31) ? 0 : regs->regs[rt];
+	address = (rt == 31) ? 0 : regs->regs[rt];
 
-		switch (crm) {
-		case 11:		/* DC CVAU, gets promoted */
-			__user_cache_maint("dc civac", address, ret);
-			break;
-		case 10:		/* DC CVAC, gets promoted */
-			__user_cache_maint("dc civac", address, ret);
-			break;
-		case 14:		/* DC CIVAC */
-			__user_cache_maint("dc civac", address, ret);
-			break;
-		case 5:			/* IC IVAU */
-			__user_cache_maint("ic ivau", address, ret);
-			break;
-		default:
-			force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
-			return;
-		}
-	} else {
+	switch (crm) {
+	case ESR_ELx_SYS64_ISS_CRM_DC_CVAU:	/* DC CVAU, gets promoted */
+		__user_cache_maint("dc civac", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_DC_CVAC:	/* DC CVAC, gets promoted */
+		__user_cache_maint("dc civac", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_DC_CIVAC:	/* DC CIVAC */
+		__user_cache_maint("dc civac", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_IC_IVAU:	/* IC IVAU */
+		__user_cache_maint("ic ivau", address, ret);
+		break;
+	default:
 		force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
 		return;
 	}
@@ -487,6 +480,48 @@ asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs)
 		regs->pc += 4;
 }
 
+static void ctr_read_handler(unsigned int esr, struct pt_regs *regs)
+{
+	int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT;
+
+	regs->regs[rt] = arm64_ftr_reg_ctrel0.sys_val;
+	regs->pc += 4;
+}
+
+struct sys64_hook {
+	unsigned int esr_mask;
+	unsigned int esr_val;
+	void (*handler)(unsigned int esr, struct pt_regs *regs);
+};
+
+static struct sys64_hook sys64_hooks[] = {
+	{
+		.esr_mask = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL,
+		.handler = user_cache_maint_handler,
+	},
+	{
+		/* Trap read access to CTR_EL0 */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_CTR_READ,
+		.handler = ctr_read_handler,
+	},
+	{},
+};
+
+asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs)
+{
+	struct sys64_hook *hook;
+
+	for (hook = sys64_hooks; hook->handler; hook++)
+		if ((hook->esr_mask & esr) == hook->esr_val) {
+			hook->handler(esr, regs);
+			return;
+		}
+
+	force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0);
+}
+
 long compat_arm_syscall(struct pt_regs *regs);
 
 asmlinkage long do_ni_syscall(struct pt_regs *regs)
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 076312b..a2c2478 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -18,12 +18,13 @@
  * Author: Will Deacon <will.deacon@arm.com>
  */
 
-#include <linux/kernel.h>
+#include <linux/cache.h>
 #include <linux/clocksource.h>
 #include <linux/elf.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/gfp.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
@@ -37,8 +38,7 @@
 #include <asm/vdso_datapage.h>
 
 extern char vdso_start, vdso_end;
-static unsigned long vdso_pages;
-static struct page **vdso_pagelist;
+static unsigned long vdso_pages __ro_after_init;
 
 /*
  * The vDSO data page.
@@ -53,9 +53,9 @@ struct vdso_data *vdso_data = &vdso_data_store.data;
 /*
  * Create and map the vectors page for AArch32 tasks.
  */
-static struct page *vectors_page[1];
+static struct page *vectors_page[1] __ro_after_init;
 
-static int alloc_vectors_page(void)
+static int __init alloc_vectors_page(void)
 {
 	extern char __kuser_helper_start[], __kuser_helper_end[];
 	extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[];
@@ -88,7 +88,7 @@ int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp)
 {
 	struct mm_struct *mm = current->mm;
 	unsigned long addr = AARCH32_VECTORS_BASE;
-	static struct vm_special_mapping spec = {
+	static const struct vm_special_mapping spec = {
 		.name	= "[vectors]",
 		.pages	= vectors_page,
 
@@ -110,11 +110,19 @@ int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp)
 }
 #endif /* CONFIG_COMPAT */
 
-static struct vm_special_mapping vdso_spec[2];
+static struct vm_special_mapping vdso_spec[2] __ro_after_init = {
+	{
+		.name	= "[vvar]",
+	},
+	{
+		.name	= "[vdso]",
+	},
+};
 
 static int __init vdso_init(void)
 {
 	int i;
+	struct page **vdso_pagelist;
 
 	if (memcmp(&vdso_start, "\177ELF", 4)) {
 		pr_err("vDSO is not a valid ELF object!\n");
@@ -138,16 +146,8 @@ static int __init vdso_init(void)
 	for (i = 0; i < vdso_pages; i++)
 		vdso_pagelist[i + 1] = pfn_to_page(PHYS_PFN(__pa(&vdso_start)) + i);
 
-	/* Populate the special mapping structures */
-	vdso_spec[0] = (struct vm_special_mapping) {
-		.name	= "[vvar]",
-		.pages	= vdso_pagelist,
-	};
-
-	vdso_spec[1] = (struct vm_special_mapping) {
-		.name	= "[vdso]",
-		.pages	= &vdso_pagelist[1],
-	};
+	vdso_spec[0].pages = &vdso_pagelist[0];
+	vdso_spec[1].pages = &vdso_pagelist[1];
 
 	return 0;
 }
@@ -201,7 +201,7 @@ up_fail:
  */
 void update_vsyscall(struct timekeeper *tk)
 {
-	u32 use_syscall = strcmp(tk->tkr_mono.clock->name, "arch_sys_counter");
+	u32 use_syscall = !tk->tkr_mono.clock->archdata.vdso_direct;
 
 	++vdso_data->tb_seq_count;
 	smp_wmb();
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 659963d..1105aab 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -122,6 +122,7 @@ SECTIONS
 			ENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
+			CPUIDLE_TEXT
 			LOCK_TEXT
 			KPROBES_TEXT
 			HYPERVISOR_TEXT
@@ -185,6 +186,25 @@ SECTIONS
 	_data = .;
 	_sdata = .;
 	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+
+	/*
+	 * Data written with the MMU off but read with the MMU on requires
+	 * cache lines to be invalidated, discarding up to a Cache Writeback
+	 * Granule (CWG) of data from the cache. Keep the section that
+	 * requires this type of maintenance to be in its own Cache Writeback
+	 * Granule (CWG) area so the cache maintenance operations don't
+	 * interfere with adjacent data.
+	 */
+	.mmuoff.data.write : ALIGN(SZ_2K) {
+		__mmuoff_data_start = .;
+		*(.mmuoff.data.write)
+	}
+	. = ALIGN(SZ_2K);
+	.mmuoff.data.read : {
+		*(.mmuoff.data.read)
+		__mmuoff_data_end = .;
+	}
+
 	PECOFF_EDATA_PADDING
 	_edata = .;
 
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index 9c9edc9..6eaf12c 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -16,7 +16,7 @@ menuconfig VIRTUALIZATION
 
 if VIRTUALIZATION
 
-config KVM_ARM_VGIC_V3
+config KVM_ARM_VGIC_V3_ITS
 	bool
 
 config KVM
@@ -34,7 +34,7 @@ config KVM
 	select KVM_VFIO
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQFD
-	select KVM_ARM_VGIC_V3
+	select KVM_ARM_VGIC_V3_ITS
 	select KVM_ARM_PMU if HW_PERF_EVENTS
 	select HAVE_KVM_MSI
 	select HAVE_KVM_IRQCHIP
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 695eb3c..d50a82a 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -16,9 +16,10 @@ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/e
 kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/arm.o $(ARM)/mmu.o $(ARM)/mmio.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/psci.o $(ARM)/perf.o
 
-kvm-$(CONFIG_KVM_ARM_HOST) += emulate.o inject_fault.o regmap.o
+kvm-$(CONFIG_KVM_ARM_HOST) += inject_fault.o regmap.o
 kvm-$(CONFIG_KVM_ARM_HOST) += hyp.o hyp-init.o handle_exit.o
 kvm-$(CONFIG_KVM_ARM_HOST) += guest.o debug.o reset.o sys_regs.o sys_regs_generic_v8.o
+kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/aarch32.o
 
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic-init.o
diff --git a/arch/arm64/kvm/emulate.c b/arch/arm64/kvm/emulate.c
deleted file mode 100644
index f87d8fb..0000000
--- a/arch/arm64/kvm/emulate.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (not much of an) Emulation layer for 32bit guests.
- *
- * Copyright (C) 2012,2013 - ARM Ltd
- * Author: Marc Zyngier <marc.zyngier@arm.com>
- *
- * based on arch/arm/kvm/emulate.c
- * Copyright (C) 2012 - Virtual Open Systems and Columbia University
- * Author: Christoffer Dall <c.dall@virtualopensystems.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kvm_host.h>
-#include <asm/esr.h>
-#include <asm/kvm_emulate.h>
-
-/*
- * stolen from arch/arm/kernel/opcodes.c
- *
- * condition code lookup table
- * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
- *
- * bit position in short is condition code: NZCV
- */
-static const unsigned short cc_map[16] = {
-	0xF0F0,			/* EQ == Z set            */
-	0x0F0F,			/* NE                     */
-	0xCCCC,			/* CS == C set            */
-	0x3333,			/* CC                     */
-	0xFF00,			/* MI == N set            */
-	0x00FF,			/* PL                     */
-	0xAAAA,			/* VS == V set            */
-	0x5555,			/* VC                     */
-	0x0C0C,			/* HI == C set && Z clear */
-	0xF3F3,			/* LS == C clear || Z set */
-	0xAA55,			/* GE == (N==V)           */
-	0x55AA,			/* LT == (N!=V)           */
-	0x0A05,			/* GT == (!Z && (N==V))   */
-	0xF5FA,			/* LE == (Z || (N!=V))    */
-	0xFFFF,			/* AL always              */
-	0			/* NV                     */
-};
-
-static int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu)
-{
-	u32 esr = kvm_vcpu_get_hsr(vcpu);
-
-	if (esr & ESR_ELx_CV)
-		return (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT;
-
-	return -1;
-}
-
-/*
- * Check if a trapped instruction should have been executed or not.
- */
-bool kvm_condition_valid32(const struct kvm_vcpu *vcpu)
-{
-	unsigned long cpsr;
-	u32 cpsr_cond;
-	int cond;
-
-	/* Top two bits non-zero?  Unconditional. */
-	if (kvm_vcpu_get_hsr(vcpu) >> 30)
-		return true;
-
-	/* Is condition field valid? */
-	cond = kvm_vcpu_get_condition(vcpu);
-	if (cond == 0xE)
-		return true;
-
-	cpsr = *vcpu_cpsr(vcpu);
-
-	if (cond < 0) {
-		/* This can happen in Thumb mode: examine IT state. */
-		unsigned long it;
-
-		it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3);
-
-		/* it == 0 => unconditional. */
-		if (it == 0)
-			return true;
-
-		/* The cond for this insn works out as the top 4 bits. */
-		cond = (it >> 4);
-	}
-
-	cpsr_cond = cpsr >> 28;
-
-	if (!((cc_map[cond] >> cpsr_cond) & 1))
-		return false;
-
-	return true;
-}
-
-/**
- * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block
- * @vcpu:	The VCPU pointer
- *
- * When exceptions occur while instructions are executed in Thumb IF-THEN
- * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have
- * to do this little bit of work manually. The fields map like this:
- *
- * IT[7:0] -> CPSR[26:25],CPSR[15:10]
- */
-static void kvm_adjust_itstate(struct kvm_vcpu *vcpu)
-{
-	unsigned long itbits, cond;
-	unsigned long cpsr = *vcpu_cpsr(vcpu);
-	bool is_arm = !(cpsr & COMPAT_PSR_T_BIT);
-
-	BUG_ON(is_arm && (cpsr & COMPAT_PSR_IT_MASK));
-
-	if (!(cpsr & COMPAT_PSR_IT_MASK))
-		return;
-
-	cond = (cpsr & 0xe000) >> 13;
-	itbits = (cpsr & 0x1c00) >> (10 - 2);
-	itbits |= (cpsr & (0x3 << 25)) >> 25;
-
-	/* Perform ITAdvance (see page A2-52 in ARM DDI 0406C) */
-	if ((itbits & 0x7) == 0)
-		itbits = cond = 0;
-	else
-		itbits = (itbits << 1) & 0x1f;
-
-	cpsr &= ~COMPAT_PSR_IT_MASK;
-	cpsr |= cond << 13;
-	cpsr |= (itbits & 0x1c) << (10 - 2);
-	cpsr |= (itbits & 0x3) << 25;
-	*vcpu_cpsr(vcpu) = cpsr;
-}
-
-/**
- * kvm_skip_instr - skip a trapped instruction and proceed to the next
- * @vcpu: The vcpu pointer
- */
-void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr)
-{
-	bool is_thumb;
-
-	is_thumb = !!(*vcpu_cpsr(vcpu) & COMPAT_PSR_T_BIT);
-	if (is_thumb && !is_wide_instr)
-		*vcpu_pc(vcpu) += 2;
-	else
-		*vcpu_pc(vcpu) += 4;
-	kvm_adjust_itstate(vcpu);
-}
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index fa96fe2..a204adf 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -170,9 +170,32 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 {
 	exit_handle_fn exit_handler;
 
+	if (ARM_SERROR_PENDING(exception_index)) {
+		u8 hsr_ec = ESR_ELx_EC(kvm_vcpu_get_hsr(vcpu));
+
+		/*
+		 * HVC/SMC already have an adjusted PC, which we need
+		 * to correct in order to return to after having
+		 * injected the SError.
+		 */
+		if (hsr_ec == ESR_ELx_EC_HVC32 || hsr_ec == ESR_ELx_EC_HVC64 ||
+		    hsr_ec == ESR_ELx_EC_SMC32 || hsr_ec == ESR_ELx_EC_SMC64) {
+			u32 adj =  kvm_vcpu_trap_il_is32bit(vcpu) ? 4 : 2;
+			*vcpu_pc(vcpu) -= adj;
+		}
+
+		kvm_inject_vabt(vcpu);
+		return 1;
+	}
+
+	exception_index = ARM_EXCEPTION_CODE(exception_index);
+
 	switch (exception_index) {
 	case ARM_EXCEPTION_IRQ:
 		return 1;
+	case ARM_EXCEPTION_EL1_SERROR:
+		kvm_inject_vabt(vcpu);
+		return 1;
 	case ARM_EXCEPTION_TRAP:
 		/*
 		 * See ARM ARM B1.14.1: "Hyp traps on instructions
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 7ce9315..2726635 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -46,10 +46,6 @@ alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
 	hvc	#0
 	ldr     lr, [sp], #16
 	ret
-alternative_else
+alternative_else_nop_endif
 	b	__vhe_hyp_call
-	nop
-	nop
-	nop
-alternative_endif
 ENDPROC(__kvm_call_hyp)
diff --git a/arch/arm64/kvm/hyp/Makefile b/arch/arm64/kvm/hyp/Makefile
index 0c85feb..aaf42ae 100644
--- a/arch/arm64/kvm/hyp/Makefile
+++ b/arch/arm64/kvm/hyp/Makefile
@@ -5,9 +5,9 @@
 KVM=../../../../virt/kvm
 
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
 
-obj-$(CONFIG_KVM_ARM_HOST) += vgic-v3-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += sysreg-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += debug-sr.o
 obj-$(CONFIG_KVM_ARM_HOST) += entry.o
diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c
index 33342a7..4ba5c90 100644
--- a/arch/arm64/kvm/hyp/debug-sr.c
+++ b/arch/arm64/kvm/hyp/debug-sr.c
@@ -131,9 +131,7 @@ void __hyp_text __debug_cond_restore_host_state(struct kvm_vcpu *vcpu)
 		vcpu->arch.debug_flags &= ~KVM_ARM64_DEBUG_DIRTY;
 }
 
-static u32 __hyp_text __debug_read_mdcr_el2(void)
+u32 __hyp_text __kvm_get_mdcr_el2(void)
 {
 	return read_sysreg(mdcr_el2);
 }
-
-__alias(__debug_read_mdcr_el2) u32 __kvm_get_mdcr_el2(void);
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
index ce9e5e5..12ee62d 100644
--- a/arch/arm64/kvm/hyp/entry.S
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -55,79 +55,111 @@
  */
 ENTRY(__guest_enter)
 	// x0: vcpu
-	// x1: host/guest context
-	// x2-x18: clobbered by macros
+	// x1: host context
+	// x2-x17: clobbered by macros
+	// x18: guest context
 
 	// Store the host regs
 	save_callee_saved_regs x1
 
-	// Preserve vcpu & host_ctxt for use at exit time
-	stp	x0, x1, [sp, #-16]!
+	// Store the host_ctxt for use at exit time
+	str	x1, [sp, #-16]!
 
-	add	x1, x0, #VCPU_CONTEXT
+	add	x18, x0, #VCPU_CONTEXT
 
-	// Prepare x0-x1 for later restore by pushing them onto the stack
-	ldp	x2, x3, [x1, #CPU_XREG_OFFSET(0)]
-	stp	x2, x3, [sp, #-16]!
+	// Restore guest regs x0-x17
+	ldp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	ldp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	ldp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
 
-	// x2-x18
-	ldp	x2, x3,   [x1, #CPU_XREG_OFFSET(2)]
-	ldp	x4, x5,   [x1, #CPU_XREG_OFFSET(4)]
-	ldp	x6, x7,   [x1, #CPU_XREG_OFFSET(6)]
-	ldp	x8, x9,   [x1, #CPU_XREG_OFFSET(8)]
-	ldp	x10, x11, [x1, #CPU_XREG_OFFSET(10)]
-	ldp	x12, x13, [x1, #CPU_XREG_OFFSET(12)]
-	ldp	x14, x15, [x1, #CPU_XREG_OFFSET(14)]
-	ldp	x16, x17, [x1, #CPU_XREG_OFFSET(16)]
-	ldr	x18,      [x1, #CPU_XREG_OFFSET(18)]
-
-	// x19-x29, lr
-	restore_callee_saved_regs x1
-
-	// Last bits of the 64bit state
-	ldp	x0, x1, [sp], #16
+	// Restore guest regs x19-x29, lr
+	restore_callee_saved_regs x18
+
+	// Restore guest reg x18
+	ldr	x18,      [x18, #CPU_XREG_OFFSET(18)]
 
 	// Do not touch any register after this!
 	eret
 ENDPROC(__guest_enter)
 
 ENTRY(__guest_exit)
-	// x0: vcpu
-	// x1: return code
-	// x2-x3: free
-	// x4-x29,lr: vcpu regs
-	// vcpu x0-x3 on the stack
+	// x0: return code
+	// x1: vcpu
+	// x2-x29,lr: vcpu regs
+	// vcpu x0-x1 on the stack
 
-	add	x2, x0, #VCPU_CONTEXT
+	add	x1, x1, #VCPU_CONTEXT
 
-	stp	x4, x5,   [x2, #CPU_XREG_OFFSET(4)]
-	stp	x6, x7,   [x2, #CPU_XREG_OFFSET(6)]
-	stp	x8, x9,   [x2, #CPU_XREG_OFFSET(8)]
-	stp	x10, x11, [x2, #CPU_XREG_OFFSET(10)]
-	stp	x12, x13, [x2, #CPU_XREG_OFFSET(12)]
-	stp	x14, x15, [x2, #CPU_XREG_OFFSET(14)]
-	stp	x16, x17, [x2, #CPU_XREG_OFFSET(16)]
-	str	x18,      [x2, #CPU_XREG_OFFSET(18)]
+	ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 
-	ldp	x6, x7, [sp], #16	// x2, x3
-	ldp	x4, x5, [sp], #16	// x0, x1
+	// Store the guest regs x2 and x3
+	stp	x2, x3,   [x1, #CPU_XREG_OFFSET(2)]
 
-	stp	x4, x5, [x2, #CPU_XREG_OFFSET(0)]
-	stp	x6, x7, [x2, #CPU_XREG_OFFSET(2)]
+	// Retrieve the guest regs x0-x1 from the stack
+	ldp	x2, x3, [sp], #16	// x0, x1
+
+	// Store the guest regs x0-x1 and x4-x18
+	stp	x2, x3,   [x1, #CPU_XREG_OFFSET(0)]
+	stp	x4, x5,   [x1, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x1, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x1, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x1, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x1, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x1, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x1, #CPU_XREG_OFFSET(16)]
+	str	x18,      [x1, #CPU_XREG_OFFSET(18)]
+
+	// Store the guest regs x19-x29, lr
+	save_callee_saved_regs x1
 
-	save_callee_saved_regs x2
+	// Restore the host_ctxt from the stack
+	ldr	x2, [sp], #16
 
-	// Restore vcpu & host_ctxt from the stack
-	// (preserving return code in x1)
-	ldp	x0, x2, [sp], #16
 	// Now restore the host regs
 	restore_callee_saved_regs x2
 
-	mov	x0, x1
-	ret
+	// If we have a pending asynchronous abort, now is the
+	// time to find out. From your VAXorcist book, page 666:
+	// "Threaten me not, oh Evil one!  For I speak with
+	// the power of DEC, and I command thee to show thyself!"
+	mrs	x2, elr_el2
+	mrs	x3, esr_el2
+	mrs	x4, spsr_el2
+	mov	x5, x0
+
+	dsb	sy		// Synchronize against in-flight ld/st
+	msr	daifclr, #4	// Unmask aborts
+
+	// This is our single instruction exception window. A pending
+	// SError is guaranteed to occur at the earliest when we unmask
+	// it, and at the latest just after the ISB.
+	.global	abort_guest_exit_start
+abort_guest_exit_start:
+
+	isb
+
+	.global	abort_guest_exit_end
+abort_guest_exit_end:
+
+	// If the exception took place, restore the EL1 exception
+	// context so that we can report some information.
+	// Merge the exception code with the SError pending bit.
+	tbz	x0, #ARM_EXIT_WITH_SERROR_BIT, 1f
+	msr	elr_el2, x2
+	msr	esr_el2, x3
+	msr	spsr_el2, x4
+	orr	x0, x0, x5
+1:	ret
 ENDPROC(__guest_exit)
 
 ENTRY(__fpsimd_guest_restore)
+	stp	x2, x3, [sp, #-16]!
 	stp	x4, lr, [sp, #-16]!
 
 alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index f6d9694..4e92399 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -27,16 +27,6 @@
 	.text
 	.pushsection	.hyp.text, "ax"
 
-.macro	save_x0_to_x3
-	stp	x0, x1, [sp, #-16]!
-	stp	x2, x3, [sp, #-16]!
-.endm
-
-.macro	restore_x0_to_x3
-	ldp	x2, x3, [sp], #16
-	ldp	x0, x1, [sp], #16
-.endm
-
 .macro do_el2_call
 	/*
 	 * Shuffle the parameters before calling the function
@@ -79,23 +69,23 @@ ENTRY(__kvm_hyp_teardown)
 ENDPROC(__kvm_hyp_teardown)
 	
 el1_sync:				// Guest trapped into EL2
-	save_x0_to_x3
+	stp	x0, x1, [sp, #-16]!
 
 alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
 	mrs	x1, esr_el2
 alternative_else
 	mrs	x1, esr_el1
 alternative_endif
-	lsr	x2, x1, #ESR_ELx_EC_SHIFT
+	lsr	x0, x1, #ESR_ELx_EC_SHIFT
 
-	cmp	x2, #ESR_ELx_EC_HVC64
+	cmp	x0, #ESR_ELx_EC_HVC64
 	b.ne	el1_trap
 
-	mrs	x3, vttbr_el2		// If vttbr is valid, the 64bit guest
-	cbnz	x3, el1_trap		// called HVC
+	mrs	x1, vttbr_el2		// If vttbr is valid, the 64bit guest
+	cbnz	x1, el1_trap		// called HVC
 
 	/* Here, we're pretty sure the host called HVC. */
-	restore_x0_to_x3
+	ldp	x0, x1, [sp], #16
 
 	cmp	x0, #HVC_GET_VECTORS
 	b.ne	1f
@@ -113,24 +103,51 @@ alternative_endif
 
 el1_trap:
 	/*
-	 * x1: ESR
-	 * x2: ESR_EC
+	 * x0: ESR_EC
 	 */
 
 	/* Guest accessed VFP/SIMD registers, save host, restore Guest */
-	cmp	x2, #ESR_ELx_EC_FP_ASIMD
+	cmp	x0, #ESR_ELx_EC_FP_ASIMD
 	b.eq	__fpsimd_guest_restore
 
-	mrs	x0, tpidr_el2
-	mov	x1, #ARM_EXCEPTION_TRAP
+	mrs	x1, tpidr_el2
+	mov	x0, #ARM_EXCEPTION_TRAP
 	b	__guest_exit
 
 el1_irq:
-	save_x0_to_x3
-	mrs	x0, tpidr_el2
-	mov	x1, #ARM_EXCEPTION_IRQ
+	stp     x0, x1, [sp, #-16]!
+	mrs	x1, tpidr_el2
+	mov	x0, #ARM_EXCEPTION_IRQ
+	b	__guest_exit
+
+el1_error:
+	stp     x0, x1, [sp, #-16]!
+	mrs	x1, tpidr_el2
+	mov	x0, #ARM_EXCEPTION_EL1_SERROR
 	b	__guest_exit
 
+el2_error:
+	/*
+	 * Only two possibilities:
+	 * 1) Either we come from the exit path, having just unmasked
+	 *    PSTATE.A: change the return code to an EL2 fault, and
+	 *    carry on, as we're already in a sane state to handle it.
+	 * 2) Or we come from anywhere else, and that's a bug: we panic.
+	 *
+	 * For (1), x0 contains the original return code and x1 doesn't
+	 * contain anything meaningful at that stage. We can reuse them
+	 * as temp registers.
+	 * For (2), who cares?
+	 */
+	mrs	x0, elr_el2
+	adr	x1, abort_guest_exit_start
+	cmp	x0, x1
+	adr	x1, abort_guest_exit_end
+	ccmp	x0, x1, #4, ne
+	b.ne	__hyp_panic
+	mov	x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
+	eret
+
 ENTRY(__hyp_do_panic)
 	mov	lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
 		      PSR_MODE_EL1h)
@@ -155,11 +172,9 @@ ENDPROC(\label)
 	invalid_vector	el2h_sync_invalid
 	invalid_vector	el2h_irq_invalid
 	invalid_vector	el2h_fiq_invalid
-	invalid_vector	el2h_error_invalid
 	invalid_vector	el1_sync_invalid
 	invalid_vector	el1_irq_invalid
 	invalid_vector	el1_fiq_invalid
-	invalid_vector	el1_error_invalid
 
 	.ltorg
 
@@ -174,15 +189,15 @@ ENTRY(__kvm_hyp_vector)
 	ventry	el2h_sync_invalid		// Synchronous EL2h
 	ventry	el2h_irq_invalid		// IRQ EL2h
 	ventry	el2h_fiq_invalid		// FIQ EL2h
-	ventry	el2h_error_invalid		// Error EL2h
+	ventry	el2_error			// Error EL2h
 
 	ventry	el1_sync			// Synchronous 64-bit EL1
 	ventry	el1_irq				// IRQ 64-bit EL1
 	ventry	el1_fiq_invalid			// FIQ 64-bit EL1
-	ventry	el1_error_invalid		// Error 64-bit EL1
+	ventry	el1_error			// Error 64-bit EL1
 
 	ventry	el1_sync			// Synchronous 32-bit EL1
 	ventry	el1_irq				// IRQ 32-bit EL1
 	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
-	ventry	el1_error_invalid		// Error 32-bit EL1
+	ventry	el1_error			// Error 32-bit EL1
 ENDPROC(__kvm_hyp_vector)
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 5a84b45..83037cd 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -16,7 +16,10 @@
  */
 
 #include <linux/types.h>
+#include <linux/jump_label.h>
+
 #include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
 #include <asm/kvm_hyp.h>
 
 static bool __hyp_text __fpsimd_enabled_nvhe(void)
@@ -109,6 +112,15 @@ static hyp_alternate_select(__deactivate_traps_arch,
 
 static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
 {
+	/*
+	 * If we pended a virtual abort, preserve it until it gets
+	 * cleared. See D1.14.3 (Virtual Interrupts) for details, but
+	 * the crucial bit is "On taking a vSError interrupt,
+	 * HCR_EL2.VSE is cleared to 0."
+	 */
+	if (vcpu->arch.hcr_el2 & HCR_VSE)
+		vcpu->arch.hcr_el2 = read_sysreg(hcr_el2);
+
 	__deactivate_traps_arch()();
 	write_sysreg(0, hstr_el2);
 	write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2);
@@ -126,17 +138,13 @@ static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu)
 	write_sysreg(0, vttbr_el2);
 }
 
-static hyp_alternate_select(__vgic_call_save_state,
-			    __vgic_v2_save_state, __vgic_v3_save_state,
-			    ARM64_HAS_SYSREG_GIC_CPUIF);
-
-static hyp_alternate_select(__vgic_call_restore_state,
-			    __vgic_v2_restore_state, __vgic_v3_restore_state,
-			    ARM64_HAS_SYSREG_GIC_CPUIF);
-
 static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu)
 {
-	__vgic_call_save_state()(vcpu);
+	if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		__vgic_v3_save_state(vcpu);
+	else
+		__vgic_v2_save_state(vcpu);
+
 	write_sysreg(read_sysreg(hcr_el2) & ~HCR_INT_OVERRIDE, hcr_el2);
 }
 
@@ -149,7 +157,10 @@ static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu)
 	val |= vcpu->arch.irq_lines;
 	write_sysreg(val, hcr_el2);
 
-	__vgic_call_restore_state()(vcpu);
+	if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		__vgic_v3_restore_state(vcpu);
+	else
+		__vgic_v2_restore_state(vcpu);
 }
 
 static bool __hyp_text __true_value(void)
@@ -232,7 +243,22 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
 	return true;
 }
 
-static int __hyp_text __guest_run(struct kvm_vcpu *vcpu)
+static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
+{
+	*vcpu_pc(vcpu) = read_sysreg_el2(elr);
+
+	if (vcpu_mode_is_32bit(vcpu)) {
+		vcpu->arch.ctxt.gp_regs.regs.pstate = read_sysreg_el2(spsr);
+		kvm_skip_instr32(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+		write_sysreg_el2(vcpu->arch.ctxt.gp_regs.regs.pstate, spsr);
+	} else {
+		*vcpu_pc(vcpu) += 4;
+	}
+
+	write_sysreg_el2(*vcpu_pc(vcpu), elr);
+}
+
+int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *host_ctxt;
 	struct kvm_cpu_context *guest_ctxt;
@@ -267,9 +293,43 @@ again:
 	exit_code = __guest_enter(vcpu, host_ctxt);
 	/* And we're baaack! */
 
+	/*
+	 * We're using the raw exception code in order to only process
+	 * the trap if no SError is pending. We will come back to the
+	 * same PC once the SError has been injected, and replay the
+	 * trapping instruction.
+	 */
 	if (exit_code == ARM_EXCEPTION_TRAP && !__populate_fault_info(vcpu))
 		goto again;
 
+	if (static_branch_unlikely(&vgic_v2_cpuif_trap) &&
+	    exit_code == ARM_EXCEPTION_TRAP) {
+		bool valid;
+
+		valid = kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_DABT_LOW &&
+			kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT &&
+			kvm_vcpu_dabt_isvalid(vcpu) &&
+			!kvm_vcpu_dabt_isextabt(vcpu) &&
+			!kvm_vcpu_dabt_iss1tw(vcpu);
+
+		if (valid) {
+			int ret = __vgic_v2_perform_cpuif_access(vcpu);
+
+			if (ret == 1) {
+				__skip_instr(vcpu);
+				goto again;
+			}
+
+			if (ret == -1) {
+				/* Promote an illegal access to an SError */
+				__skip_instr(vcpu);
+				exit_code = ARM_EXCEPTION_EL1_SERROR;
+			}
+
+			/* 0 falls through to be handler out of EL2 */
+		}
+	}
+
 	fp_enabled = __fpsimd_enabled();
 
 	__sysreg_save_guest_state(guest_ctxt);
@@ -293,8 +353,6 @@ again:
 	return exit_code;
 }
 
-__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
-
 static const char __hyp_panic_string[] = "HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%p\n";
 
 static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par)
diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c
index be8177c..9cc0ea7 100644
--- a/arch/arm64/kvm/hyp/tlb.c
+++ b/arch/arm64/kvm/hyp/tlb.c
@@ -17,7 +17,7 @@
 
 #include <asm/kvm_hyp.h>
 
-static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
+void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 {
 	dsb(ishst);
 
@@ -48,10 +48,7 @@ static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 	write_sysreg(0, vttbr_el2);
 }
 
-__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm,
-							    phys_addr_t ipa);
-
-static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
+void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
 {
 	dsb(ishst);
 
@@ -67,14 +64,10 @@ static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
 	write_sysreg(0, vttbr_el2);
 }
 
-__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm);
-
-static void __hyp_text __tlb_flush_vm_context(void)
+void __hyp_text __kvm_flush_vm_context(void)
 {
 	dsb(ishst);
 	asm volatile("tlbi alle1is	\n"
 		     "ic ialluis	  ": : );
 	dsb(ish);
 }
-
-__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void);
diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c
deleted file mode 100644
index 5f8f80b..0000000
--- a/arch/arm64/kvm/hyp/vgic-v3-sr.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright (C) 2012-2015 - ARM Ltd
- * Author: Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/compiler.h>
-#include <linux/irqchip/arm-gic-v3.h>
-#include <linux/kvm_host.h>
-
-#include <asm/kvm_hyp.h>
-
-#define vtr_to_max_lr_idx(v)		((v) & 0xf)
-#define vtr_to_nr_pri_bits(v)		(((u32)(v) >> 29) + 1)
-
-#define read_gicreg(r)							\
-	({								\
-		u64 reg;						\
-		asm volatile("mrs_s %0, " __stringify(r) : "=r" (reg));	\
-		reg;							\
-	})
-
-#define write_gicreg(v,r)						\
-	do {								\
-		u64 __val = (v);					\
-		asm volatile("msr_s " __stringify(r) ", %0" : : "r" (__val));\
-	} while (0)
-
-static u64 __hyp_text __gic_v3_get_lr(unsigned int lr)
-{
-	switch (lr & 0xf) {
-	case 0:
-		return read_gicreg(ICH_LR0_EL2);
-	case 1:
-		return read_gicreg(ICH_LR1_EL2);
-	case 2:
-		return read_gicreg(ICH_LR2_EL2);
-	case 3:
-		return read_gicreg(ICH_LR3_EL2);
-	case 4:
-		return read_gicreg(ICH_LR4_EL2);
-	case 5:
-		return read_gicreg(ICH_LR5_EL2);
-	case 6:
-		return read_gicreg(ICH_LR6_EL2);
-	case 7:
-		return read_gicreg(ICH_LR7_EL2);
-	case 8:
-		return read_gicreg(ICH_LR8_EL2);
-	case 9:
-		return read_gicreg(ICH_LR9_EL2);
-	case 10:
-		return read_gicreg(ICH_LR10_EL2);
-	case 11:
-		return read_gicreg(ICH_LR11_EL2);
-	case 12:
-		return read_gicreg(ICH_LR12_EL2);
-	case 13:
-		return read_gicreg(ICH_LR13_EL2);
-	case 14:
-		return read_gicreg(ICH_LR14_EL2);
-	case 15:
-		return read_gicreg(ICH_LR15_EL2);
-	}
-
-	unreachable();
-}
-
-static void __hyp_text __gic_v3_set_lr(u64 val, int lr)
-{
-	switch (lr & 0xf) {
-	case 0:
-		write_gicreg(val, ICH_LR0_EL2);
-		break;
-	case 1:
-		write_gicreg(val, ICH_LR1_EL2);
-		break;
-	case 2:
-		write_gicreg(val, ICH_LR2_EL2);
-		break;
-	case 3:
-		write_gicreg(val, ICH_LR3_EL2);
-		break;
-	case 4:
-		write_gicreg(val, ICH_LR4_EL2);
-		break;
-	case 5:
-		write_gicreg(val, ICH_LR5_EL2);
-		break;
-	case 6:
-		write_gicreg(val, ICH_LR6_EL2);
-		break;
-	case 7:
-		write_gicreg(val, ICH_LR7_EL2);
-		break;
-	case 8:
-		write_gicreg(val, ICH_LR8_EL2);
-		break;
-	case 9:
-		write_gicreg(val, ICH_LR9_EL2);
-		break;
-	case 10:
-		write_gicreg(val, ICH_LR10_EL2);
-		break;
-	case 11:
-		write_gicreg(val, ICH_LR11_EL2);
-		break;
-	case 12:
-		write_gicreg(val, ICH_LR12_EL2);
-		break;
-	case 13:
-		write_gicreg(val, ICH_LR13_EL2);
-		break;
-	case 14:
-		write_gicreg(val, ICH_LR14_EL2);
-		break;
-	case 15:
-		write_gicreg(val, ICH_LR15_EL2);
-		break;
-	}
-}
-
-static void __hyp_text save_maint_int_state(struct kvm_vcpu *vcpu, int nr_lr)
-{
-	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
-	int i;
-	bool expect_mi;
-
-	expect_mi = !!(cpu_if->vgic_hcr & ICH_HCR_UIE);
-
-	for (i = 0; i < nr_lr; i++) {
-		if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
-				continue;
-
-		expect_mi |= (!(cpu_if->vgic_lr[i] & ICH_LR_HW) &&
-			      (cpu_if->vgic_lr[i] & ICH_LR_EOI));
-	}
-
-	if (expect_mi) {
-		cpu_if->vgic_misr  = read_gicreg(ICH_MISR_EL2);
-
-		if (cpu_if->vgic_misr & ICH_MISR_EOI)
-			cpu_if->vgic_eisr = read_gicreg(ICH_EISR_EL2);
-		else
-			cpu_if->vgic_eisr = 0;
-	} else {
-		cpu_if->vgic_misr = 0;
-		cpu_if->vgic_eisr = 0;
-	}
-}
-
-void __hyp_text __vgic_v3_save_state(struct kvm_vcpu *vcpu)
-{
-	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
-	u64 val;
-
-	/*
-	 * Make sure stores to the GIC via the memory mapped interface
-	 * are now visible to the system register interface.
-	 */
-	if (!cpu_if->vgic_sre)
-		dsb(st);
-
-	cpu_if->vgic_vmcr  = read_gicreg(ICH_VMCR_EL2);
-
-	if (vcpu->arch.vgic_cpu.live_lrs) {
-		int i;
-		u32 max_lr_idx, nr_pri_bits;
-
-		cpu_if->vgic_elrsr = read_gicreg(ICH_ELSR_EL2);
-
-		write_gicreg(0, ICH_HCR_EL2);
-		val = read_gicreg(ICH_VTR_EL2);
-		max_lr_idx = vtr_to_max_lr_idx(val);
-		nr_pri_bits = vtr_to_nr_pri_bits(val);
-
-		save_maint_int_state(vcpu, max_lr_idx + 1);
-
-		for (i = 0; i <= max_lr_idx; i++) {
-			if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
-				continue;
-
-			if (cpu_if->vgic_elrsr & (1 << i))
-				cpu_if->vgic_lr[i] &= ~ICH_LR_STATE;
-			else
-				cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
-
-			__gic_v3_set_lr(0, i);
-		}
-
-		switch (nr_pri_bits) {
-		case 7:
-			cpu_if->vgic_ap0r[3] = read_gicreg(ICH_AP0R3_EL2);
-			cpu_if->vgic_ap0r[2] = read_gicreg(ICH_AP0R2_EL2);
-		case 6:
-			cpu_if->vgic_ap0r[1] = read_gicreg(ICH_AP0R1_EL2);
-		default:
-			cpu_if->vgic_ap0r[0] = read_gicreg(ICH_AP0R0_EL2);
-		}
-
-		switch (nr_pri_bits) {
-		case 7:
-			cpu_if->vgic_ap1r[3] = read_gicreg(ICH_AP1R3_EL2);
-			cpu_if->vgic_ap1r[2] = read_gicreg(ICH_AP1R2_EL2);
-		case 6:
-			cpu_if->vgic_ap1r[1] = read_gicreg(ICH_AP1R1_EL2);
-		default:
-			cpu_if->vgic_ap1r[0] = read_gicreg(ICH_AP1R0_EL2);
-		}
-
-		vcpu->arch.vgic_cpu.live_lrs = 0;
-	} else {
-		cpu_if->vgic_misr  = 0;
-		cpu_if->vgic_eisr  = 0;
-		cpu_if->vgic_elrsr = 0xffff;
-		cpu_if->vgic_ap0r[0] = 0;
-		cpu_if->vgic_ap0r[1] = 0;
-		cpu_if->vgic_ap0r[2] = 0;
-		cpu_if->vgic_ap0r[3] = 0;
-		cpu_if->vgic_ap1r[0] = 0;
-		cpu_if->vgic_ap1r[1] = 0;
-		cpu_if->vgic_ap1r[2] = 0;
-		cpu_if->vgic_ap1r[3] = 0;
-	}
-
-	val = read_gicreg(ICC_SRE_EL2);
-	write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
-
-	if (!cpu_if->vgic_sre) {
-		/* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
-		isb();
-		write_gicreg(1, ICC_SRE_EL1);
-	}
-}
-
-void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
-{
-	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
-	u64 val;
-	u32 max_lr_idx, nr_pri_bits;
-	u16 live_lrs = 0;
-	int i;
-
-	/*
-	 * VFIQEn is RES1 if ICC_SRE_EL1.SRE is 1. This causes a
-	 * Group0 interrupt (as generated in GICv2 mode) to be
-	 * delivered as a FIQ to the guest, with potentially fatal
-	 * consequences. So we must make sure that ICC_SRE_EL1 has
-	 * been actually programmed with the value we want before
-	 * starting to mess with the rest of the GIC.
-	 */
-	if (!cpu_if->vgic_sre) {
-		write_gicreg(0, ICC_SRE_EL1);
-		isb();
-	}
-
-	val = read_gicreg(ICH_VTR_EL2);
-	max_lr_idx = vtr_to_max_lr_idx(val);
-	nr_pri_bits = vtr_to_nr_pri_bits(val);
-
-	for (i = 0; i <= max_lr_idx; i++) {
-		if (cpu_if->vgic_lr[i] & ICH_LR_STATE)
-			live_lrs |= (1 << i);
-	}
-
-	write_gicreg(cpu_if->vgic_vmcr, ICH_VMCR_EL2);
-
-	if (live_lrs) {
-		write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
-
-		switch (nr_pri_bits) {
-		case 7:
-			write_gicreg(cpu_if->vgic_ap0r[3], ICH_AP0R3_EL2);
-			write_gicreg(cpu_if->vgic_ap0r[2], ICH_AP0R2_EL2);
-		case 6:
-			write_gicreg(cpu_if->vgic_ap0r[1], ICH_AP0R1_EL2);
-		default:
-			write_gicreg(cpu_if->vgic_ap0r[0], ICH_AP0R0_EL2);
-		}
-
-		switch (nr_pri_bits) {
-		case 7:
-			write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
-			write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
-		case 6:
-			write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2);
-		default:
-			write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2);
-		}
-
-		for (i = 0; i <= max_lr_idx; i++) {
-			if (!(live_lrs & (1 << i)))
-				continue;
-
-			__gic_v3_set_lr(cpu_if->vgic_lr[i], i);
-		}
-	}
-
-	/*
-	 * Ensures that the above will have reached the
-	 * (re)distributors. This ensure the guest will read the
-	 * correct values from the memory-mapped interface.
-	 */
-	if (!cpu_if->vgic_sre) {
-		isb();
-		dsb(sy);
-	}
-	vcpu->arch.vgic_cpu.live_lrs = live_lrs;
-
-	/*
-	 * Prevent the guest from touching the GIC system registers if
-	 * SRE isn't enabled for GICv3 emulation.
-	 */
-	write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
-		     ICC_SRE_EL2);
-}
-
-void __hyp_text __vgic_v3_init_lrs(void)
-{
-	int max_lr_idx = vtr_to_max_lr_idx(read_gicreg(ICH_VTR_EL2));
-	int i;
-
-	for (i = 0; i <= max_lr_idx; i++)
-		__gic_v3_set_lr(0, i);
-}
-
-static u64 __hyp_text __vgic_v3_read_ich_vtr_el2(void)
-{
-	return read_gicreg(ICH_VTR_EL2);
-}
-
-__alias(__vgic_v3_read_ich_vtr_el2) u64 __vgic_v3_get_ich_vtr_el2(void);
diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
index 898c0e6..da6a8cf 100644
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -231,3 +231,15 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu)
 	else
 		inject_undef64(vcpu);
 }
+
+/**
+ * kvm_inject_vabt - inject an async abort / SError into the guest
+ * @vcpu: The VCPU to receive the exception
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_vabt(struct kvm_vcpu *vcpu)
+{
+	vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) | HCR_VSE);
+}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index e51367d..f302fdb 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -36,6 +36,7 @@
 #include <asm/kvm_host.h>
 #include <asm/kvm_mmu.h>
 #include <asm/perf_event.h>
+#include <asm/sysreg.h>
 
 #include <trace/events/kvm.h>
 
@@ -67,11 +68,9 @@ static u32 get_ccsidr(u32 csselr)
 
 	/* Make sure noone else changes CSSELR during this! */
 	local_irq_disable();
-	/* Put value into CSSELR */
-	asm volatile("msr csselr_el1, %x0" : : "r" (csselr));
+	write_sysreg(csselr, csselr_el1);
 	isb();
-	/* Read result out of CCSIDR */
-	asm volatile("mrs %0, ccsidr_el1" : "=r" (ccsidr));
+	ccsidr = read_sysreg(ccsidr_el1);
 	local_irq_enable();
 
 	return ccsidr;
@@ -174,9 +173,7 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
 	if (p->is_write) {
 		return ignore_write(vcpu, p);
 	} else {
-		u32 val;
-		asm volatile("mrs %0, dbgauthstatus_el1" : "=r" (val));
-		p->regval = val;
+		p->regval = read_sysreg(dbgauthstatus_el1);
 		return true;
 	}
 }
@@ -429,10 +426,7 @@ static void reset_wcr(struct kvm_vcpu *vcpu,
 
 static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
-	u64 amair;
-
-	asm volatile("mrs %0, amair_el1\n" : "=r" (amair));
-	vcpu_sys_reg(vcpu, AMAIR_EL1) = amair;
+	vcpu_sys_reg(vcpu, AMAIR_EL1) = read_sysreg(amair_el1);
 }
 
 static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
@@ -456,8 +450,9 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 pmcr, val;
 
-	asm volatile("mrs %0, pmcr_el0\n" : "=r" (pmcr));
-	/* Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) is reset to UNKNOWN
+	pmcr = read_sysreg(pmcr_el0);
+	/*
+	 * Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) are reset to UNKNOWN
 	 * except PMCR.E resetting to zero.
 	 */
 	val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
@@ -557,9 +552,9 @@ static bool access_pmceid(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		return false;
 
 	if (!(p->Op2 & 1))
-		asm volatile("mrs %0, pmceid0_el0\n" : "=r" (pmceid));
+		pmceid = read_sysreg(pmceid0_el0);
 	else
-		asm volatile("mrs %0, pmceid1_el0\n" : "=r" (pmceid));
+		pmceid = read_sysreg(pmceid1_el0);
 
 	p->regval = pmceid;
 
@@ -1833,11 +1828,7 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu,
 	static void get_##reg(struct kvm_vcpu *v,			\
 			      const struct sys_reg_desc *r)		\
 	{								\
-		u64 val;						\
-									\
-		asm volatile("mrs %0, " __stringify(reg) "\n"		\
-			     : "=r" (val));				\
-		((struct sys_reg_desc *)r)->val = val;			\
+		((struct sys_reg_desc *)r)->val = read_sysreg(reg);	\
 	}
 
 FUNCTION_INVARIANT(midr_el1)
diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c
index ed90578..46af718 100644
--- a/arch/arm64/kvm/sys_regs_generic_v8.c
+++ b/arch/arm64/kvm/sys_regs_generic_v8.c
@@ -26,6 +26,7 @@
 #include <asm/kvm_host.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
+#include <asm/sysreg.h>
 #include <linux/init.h>
 
 #include "sys_regs.h"
@@ -43,10 +44,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu,
 
 static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
-	u64 actlr;
-
-	asm volatile("mrs %0, actlr_el1\n" : "=r" (actlr));
-	vcpu_sys_reg(vcpu, ACTLR_EL1) = actlr;
+	vcpu_sys_reg(vcpu, ACTLR_EL1) = read_sysreg(actlr_el1);
 }
 
 /*
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index 4c1e700..c3cd65e 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -29,14 +29,11 @@
  *	x1 - src
  */
 ENTRY(copy_page)
-alternative_if_not ARM64_HAS_NO_HW_PREFETCH
-	nop
-	nop
-alternative_else
+alternative_if ARM64_HAS_NO_HW_PREFETCH
 	# Prefetch two cache lines ahead.
 	prfm    pldl1strm, [x1, #128]
 	prfm    pldl1strm, [x1, #256]
-alternative_endif
+alternative_else_nop_endif
 
 	ldp	x2, x3, [x1]
 	ldp	x4, x5, [x1, #16]
@@ -52,11 +49,9 @@ alternative_endif
 1:
 	subs	x18, x18, #128
 
-alternative_if_not ARM64_HAS_NO_HW_PREFETCH
-	nop
-alternative_else
+alternative_if ARM64_HAS_NO_HW_PREFETCH
 	prfm    pldl1strm, [x1, #384]
-alternative_endif
+alternative_else_nop_endif
 
 	stnp	x2, x3, [x0]
 	ldp	x2, x3, [x1]
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index 07d7352..58b5a90 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -105,19 +105,20 @@ ENTRY(__clean_dcache_area_pou)
 ENDPROC(__clean_dcache_area_pou)
 
 /*
- *	__inval_cache_range(start, end)
- *	- start   - start address of region
- *	- end     - end address of region
+ *	__dma_inv_area(start, size)
+ *	- start   - virtual start address of region
+ *	- size    - size in question
  */
-ENTRY(__inval_cache_range)
+__dma_inv_area:
+	add	x1, x1, x0
 	/* FALLTHROUGH */
 
 /*
- *	__dma_inv_range(start, end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
+ *	__inval_cache_range(start, end)
+ *	- start   - start address of region
+ *	- end     - end address of region
  */
-__dma_inv_range:
+ENTRY(__inval_cache_range)
 	dcache_line_size x2, x3
 	sub	x3, x2, #1
 	tst	x1, x3				// end cache line aligned?
@@ -136,46 +137,43 @@ __dma_inv_range:
 	dsb	sy
 	ret
 ENDPIPROC(__inval_cache_range)
-ENDPROC(__dma_inv_range)
+ENDPROC(__dma_inv_area)
+
+/*
+ *	__clean_dcache_area_poc(kaddr, size)
+ *
+ * 	Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
+ * 	are cleaned to the PoC.
+ *
+ *	- kaddr   - kernel address
+ *	- size    - size in question
+ */
+ENTRY(__clean_dcache_area_poc)
+	/* FALLTHROUGH */
 
 /*
- *	__dma_clean_range(start, end)
+ *	__dma_clean_area(start, size)
  *	- start   - virtual start address of region
- *	- end     - virtual end address of region
+ *	- size    - size in question
  */
-__dma_clean_range:
-	dcache_line_size x2, x3
-	sub	x3, x2, #1
-	bic	x0, x0, x3
-1:
-alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
-	dc	cvac, x0
-alternative_else
-	dc	civac, x0
-alternative_endif
-	add	x0, x0, x2
-	cmp	x0, x1
-	b.lo	1b
-	dsb	sy
+__dma_clean_area:
+	dcache_by_line_op cvac, sy, x0, x1, x2, x3
 	ret
-ENDPROC(__dma_clean_range)
+ENDPIPROC(__clean_dcache_area_poc)
+ENDPROC(__dma_clean_area)
 
 /*
- *	__dma_flush_range(start, end)
+ *	__dma_flush_area(start, size)
+ *
+ *	clean & invalidate D / U line
+ *
  *	- start   - virtual start address of region
- *	- end     - virtual end address of region
+ *	- size    - size in question
  */
-ENTRY(__dma_flush_range)
-	dcache_line_size x2, x3
-	sub	x3, x2, #1
-	bic	x0, x0, x3
-1:	dc	civac, x0			// clean & invalidate D / U line
-	add	x0, x0, x2
-	cmp	x0, x1
-	b.lo	1b
-	dsb	sy
+ENTRY(__dma_flush_area)
+	dcache_by_line_op civac, sy, x0, x1, x2, x3
 	ret
-ENDPIPROC(__dma_flush_range)
+ENDPIPROC(__dma_flush_area)
 
 /*
  *	__dma_map_area(start, size, dir)
@@ -184,10 +182,9 @@ ENDPIPROC(__dma_flush_range)
  *	- dir	- DMA direction
  */
 ENTRY(__dma_map_area)
-	add	x1, x1, x0
 	cmp	w2, #DMA_FROM_DEVICE
-	b.eq	__dma_inv_range
-	b	__dma_clean_range
+	b.eq	__dma_inv_area
+	b	__dma_clean_area
 ENDPIPROC(__dma_map_area)
 
 /*
@@ -197,8 +194,7 @@ ENDPIPROC(__dma_map_area)
  *	- dir	- DMA direction
  */
 ENTRY(__dma_unmap_area)
-	add	x1, x1, x0
 	cmp	w2, #DMA_TO_DEVICE
-	b.ne	__dma_inv_range
+	b.ne	__dma_inv_area
 	ret
 ENDPIPROC(__dma_unmap_area)
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index c4284c4..3f74d0d 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -20,6 +20,7 @@
 #include <linux/gfp.h>
 #include <linux/acpi.h>
 #include <linux/bootmem.h>
+#include <linux/cache.h>
 #include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/genalloc.h>
@@ -30,7 +31,7 @@
 
 #include <asm/cacheflush.h>
 
-static int swiotlb __read_mostly;
+static int swiotlb __ro_after_init;
 
 static pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot,
 				 bool coherent)
@@ -168,7 +169,7 @@ static void *__dma_alloc(struct device *dev, size_t size,
 		return ptr;
 
 	/* remove any dirty cache lines on the kernel alias */
-	__dma_flush_range(ptr, ptr + size);
+	__dma_flush_area(ptr, size);
 
 	/* create a coherent mapping */
 	page = virt_to_page(ptr);
@@ -387,7 +388,7 @@ static int __init atomic_pool_init(void)
 		void *page_addr = page_address(page);
 
 		memset(page_addr, 0, atomic_pool_size);
-		__dma_flush_range(page_addr, page_addr + atomic_pool_size);
+		__dma_flush_area(page_addr, atomic_pool_size);
 
 		atomic_pool = gen_pool_create(PAGE_SHIFT, -1);
 		if (!atomic_pool)
@@ -548,7 +549,7 @@ fs_initcall(dma_debug_do_init);
 /* Thankfully, all cache ops are by VA so we can ignore phys here */
 static void flush_page(struct device *dev, const void *virt, phys_addr_t phys)
 {
-	__dma_flush_range(virt, virt + PAGE_SIZE);
+	__dma_flush_area(virt, PAGE_SIZE);
 }
 
 static void *__iommu_alloc_attrs(struct device *dev, size_t size,
@@ -827,7 +828,7 @@ static bool do_iommu_attach(struct device *dev, const struct iommu_ops *ops,
 	 * then the IOMMU core will have already configured a group for this
 	 * device, and allocated the default domain for that group.
 	 */
-	if (!domain || iommu_dma_init_domain(domain, dma_base, size)) {
+	if (!domain || iommu_dma_init_domain(domain, dma_base, size, dev)) {
 		pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n",
 			dev_name(dev));
 		return false;
diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c
index 81acd47..c9f118c 100644
--- a/arch/arm64/mm/extable.c
+++ b/arch/arm64/mm/extable.c
@@ -2,7 +2,7 @@
  * Based on arch/arm/mm/extable.c
  */
 
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/uaccess.h>
 
 int fixup_exception(struct pt_regs *regs)
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 05d2bd7..53d9159 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -18,7 +18,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
 #include <linux/hardirq.h>
@@ -251,8 +251,7 @@ static int __do_page_fault(struct mm_struct *mm, unsigned long addr,
 good_area:
 	/*
 	 * Check that the permissions on the VMA allow for the fault which
-	 * occurred. If we encountered a write or exec fault, we must have
-	 * appropriate permissions, otherwise we allow any permission.
+	 * occurred.
 	 */
 	if (!(vma->vm_flags & vm_flags)) {
 		fault = VM_FAULT_BADACCESS;
@@ -288,7 +287,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 	struct task_struct *tsk;
 	struct mm_struct *mm;
 	int fault, sig, code;
-	unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC;
+	unsigned long vm_flags = VM_READ | VM_WRITE;
 	unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
 
 	if (notify_page_fault(regs, esr))
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index 43a76b0..8377329 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -25,8 +25,6 @@
 #include <asm/cachetype.h>
 #include <asm/tlbflush.h>
 
-#include "mm.h"
-
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 		       unsigned long end)
 {
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index bbb7ee7..21c489b 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -23,6 +23,7 @@
 #include <linux/swap.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/cache.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
@@ -34,6 +35,7 @@
 #include <linux/dma-contiguous.h>
 #include <linux/efi.h>
 #include <linux/swiotlb.h>
+#include <linux/vmalloc.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -47,16 +49,14 @@
 #include <asm/tlb.h>
 #include <asm/alternative.h>
 
-#include "mm.h"
-
 /*
  * We need to be able to catch inadvertent references to memstart_addr
  * that occur (potentially in generic code) before arm64_memblock_init()
  * executes, which assigns it its actual value. So use a default value
  * that cannot be mistaken for a real physical address.
  */
-s64 memstart_addr __read_mostly = -1;
-phys_addr_t arm64_dma_phys_limit __read_mostly;
+s64 memstart_addr __ro_after_init = -1;
+phys_addr_t arm64_dma_phys_limit __ro_after_init;
 
 #ifdef CONFIG_BLK_DEV_INITRD
 static int __init early_initrd(char *p)
@@ -485,7 +485,12 @@ void free_initmem(void)
 {
 	free_reserved_area(__va(__pa(__init_begin)), __va(__pa(__init_end)),
 			   0, "unused kernel");
-	fixup_init();
+	/*
+	 * Unmap the __init region but leave the VM area in place. This
+	 * prevents the region from being reused for kernel modules, which
+	 * is not supported by kallsyms.
+	 */
+	unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin));
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
diff --git a/arch/arm64/mm/mm.h b/arch/arm64/mm/mm.h
deleted file mode 100644
index 71fe9898..0000000
--- a/arch/arm64/mm/mm.h
+++ /dev/null
@@ -1,2 +0,0 @@
-
-void fixup_init(void);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 4989948..05615a3 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/cache.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -42,11 +43,9 @@
 #include <asm/memblock.h>
 #include <asm/mmu_context.h>
 
-#include "mm.h"
-
 u64 idmap_t0sz = TCR_T0SZ(VA_BITS);
 
-u64 kimage_voffset __read_mostly;
+u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
 
 /*
@@ -399,16 +398,6 @@ void mark_rodata_ro(void)
 			    section_size, PAGE_KERNEL_RO);
 }
 
-void fixup_init(void)
-{
-	/*
-	 * Unmap the __init region but leave the VM area in place. This
-	 * prevents the region from being reused for kernel modules, which
-	 * is not supported by kallsyms.
-	 */
-	unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin));
-}
-
 static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
 				      pgprot_t prot, struct vm_struct *vma)
 {
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index 5bb15ea..778a985 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -17,6 +17,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#define pr_fmt(fmt) "NUMA: " fmt
+
 #include <linux/acpi.h>
 #include <linux/bootmem.h>
 #include <linux/memblock.h>
@@ -24,6 +26,7 @@
 #include <linux/of.h>
 
 #include <asm/acpi.h>
+#include <asm/sections.h>
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
@@ -38,10 +41,9 @@ static __init int numa_parse_early_param(char *opt)
 {
 	if (!opt)
 		return -EINVAL;
-	if (!strncmp(opt, "off", 3)) {
-		pr_info("%s\n", "NUMA turned off");
+	if (!strncmp(opt, "off", 3))
 		numa_off = true;
-	}
+
 	return 0;
 }
 early_param("numa", numa_parse_early_param);
@@ -93,7 +95,6 @@ void numa_clear_node(unsigned int cpu)
  */
 static void __init setup_node_to_cpumask_map(void)
 {
-	unsigned int cpu;
 	int node;
 
 	/* setup nr_node_ids if not done yet */
@@ -106,11 +107,8 @@ static void __init setup_node_to_cpumask_map(void)
 		cpumask_clear(node_to_cpumask_map[node]);
 	}
 
-	for_each_possible_cpu(cpu)
-		set_cpu_numa_node(cpu, NUMA_NO_NODE);
-
 	/* cpumask_of_node() will now work */
-	pr_debug("NUMA: Node to cpumask map for %d nodes\n", nr_node_ids);
+	pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids);
 }
 
 /*
@@ -118,18 +116,77 @@ static void __init setup_node_to_cpumask_map(void)
  */
 void numa_store_cpu_info(unsigned int cpu)
 {
-	map_cpu_to_node(cpu, numa_off ? 0 : cpu_to_node_map[cpu]);
+	map_cpu_to_node(cpu, cpu_to_node_map[cpu]);
 }
 
 void __init early_map_cpu_to_node(unsigned int cpu, int nid)
 {
 	/* fallback to node 0 */
-	if (nid < 0 || nid >= MAX_NUMNODES)
+	if (nid < 0 || nid >= MAX_NUMNODES || numa_off)
 		nid = 0;
 
 	cpu_to_node_map[cpu] = nid;
+
+	/*
+	 * We should set the numa node of cpu0 as soon as possible, because it
+	 * has already been set up online before. cpu_to_node(0) will soon be
+	 * called.
+	 */
+	if (!cpu)
+		set_cpu_numa_node(cpu, nid);
+}
+
+#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static int __init early_cpu_to_node(int cpu)
+{
+	return cpu_to_node_map[cpu];
+}
+
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	return node_distance(from, to);
 }
 
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size,
+				       size_t align)
+{
+	int nid = early_cpu_to_node(cpu);
+
+	return  memblock_virt_alloc_try_nid(size, align,
+			__pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, nid);
+}
+
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	memblock_free_early(__pa(ptr), size);
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	unsigned long delta;
+	unsigned int cpu;
+	int rc;
+
+	/*
+	 * Always reserve area for module percpu variables.  That's
+	 * what the legacy allocator did.
+	 */
+	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+				    PERCPU_DYNAMIC_RESERVE, PAGE_SIZE,
+				    pcpu_cpu_distance,
+				    pcpu_fc_alloc, pcpu_fc_free);
+	if (rc < 0)
+		panic("Failed to initialize percpu areas.");
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+}
+#endif
+
 /**
  * numa_add_memblk - Set node id to memblk
  * @nid: NUMA node ID of the new memblk
@@ -145,13 +202,13 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
 
 	ret = memblock_set_node(start, (end - start), &memblock.memory, nid);
 	if (ret < 0) {
-		pr_err("NUMA: memblock [0x%llx - 0x%llx] failed to add on node %d\n",
+		pr_err("memblock [0x%llx - 0x%llx] failed to add on node %d\n",
 			start, (end - 1), nid);
 		return ret;
 	}
 
 	node_set(nid, numa_nodes_parsed);
-	pr_info("NUMA: Adding memblock [0x%llx - 0x%llx] on node %d\n",
+	pr_info("Adding memblock [0x%llx - 0x%llx] on node %d\n",
 			start, (end - 1), nid);
 	return ret;
 }
@@ -166,19 +223,18 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 	void *nd;
 	int tnid;
 
-	pr_info("NUMA: Initmem setup node %d [mem %#010Lx-%#010Lx]\n",
-			nid, start_pfn << PAGE_SHIFT,
-			(end_pfn << PAGE_SHIFT) - 1);
+	pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n",
+		nid, start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1);
 
 	nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
 	nd = __va(nd_pa);
 
 	/* report and initialize */
-	pr_info("NUMA: NODE_DATA [mem %#010Lx-%#010Lx]\n",
+	pr_info("NODE_DATA [mem %#010Lx-%#010Lx]\n",
 		nd_pa, nd_pa + nd_size - 1);
 	tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
 	if (tnid != nid)
-		pr_info("NUMA: NODE_DATA(%d) on node %d\n", nid, tnid);
+		pr_info("NODE_DATA(%d) on node %d\n", nid, tnid);
 
 	node_data[nid] = nd;
 	memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
@@ -235,8 +291,7 @@ static int __init numa_alloc_distance(void)
 			numa_distance[i * numa_distance_cnt + j] = i == j ?
 				LOCAL_DISTANCE : REMOTE_DISTANCE;
 
-	pr_debug("NUMA: Initialized distance table, cnt=%d\n",
-			numa_distance_cnt);
+	pr_debug("Initialized distance table, cnt=%d\n", numa_distance_cnt);
 
 	return 0;
 }
@@ -257,20 +312,20 @@ static int __init numa_alloc_distance(void)
 void __init numa_set_distance(int from, int to, int distance)
 {
 	if (!numa_distance) {
-		pr_warn_once("NUMA: Warning: distance table not allocated yet\n");
+		pr_warn_once("Warning: distance table not allocated yet\n");
 		return;
 	}
 
 	if (from >= numa_distance_cnt || to >= numa_distance_cnt ||
 			from < 0 || to < 0) {
-		pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
+		pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n",
 			    from, to, distance);
 		return;
 	}
 
 	if ((u8)distance != distance ||
 	    (from == to && distance != LOCAL_DISTANCE)) {
-		pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
+		pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n",
 			     from, to, distance);
 		return;
 	}
@@ -297,7 +352,7 @@ static int __init numa_register_nodes(void)
 	/* Check that valid nid is set to memblks */
 	for_each_memblock(memory, mblk)
 		if (mblk->nid == NUMA_NO_NODE || mblk->nid >= MAX_NUMNODES) {
-			pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
+			pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",
 				mblk->nid, mblk->base,
 				mblk->base + mblk->size - 1);
 			return -EINVAL;
@@ -335,8 +390,10 @@ static int __init numa_init(int (*init_func)(void))
 	if (ret < 0)
 		return ret;
 
-	if (nodes_empty(numa_nodes_parsed))
+	if (nodes_empty(numa_nodes_parsed)) {
+		pr_info("No NUMA configuration found\n");
 		return -EINVAL;
+	}
 
 	ret = numa_register_nodes();
 	if (ret < 0)
@@ -344,10 +401,6 @@ static int __init numa_init(int (*init_func)(void))
 
 	setup_node_to_cpumask_map();
 
-	/* init boot processor */
-	cpu_to_node_map[0] = 0;
-	map_cpu_to_node(0, 0);
-
 	return 0;
 }
 
@@ -367,10 +420,8 @@ static int __init dummy_numa_init(void)
 
 	if (numa_off)
 		pr_info("NUMA disabled\n"); /* Forced off on command line. */
-	else
-		pr_info("No NUMA configuration found\n");
-	pr_info("NUMA: Faking a node at [mem %#018Lx-%#018Lx]\n",
-	       0LLU, PFN_PHYS(max_pfn) - 1);
+	pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n",
+		0LLU, PFN_PHYS(max_pfn) - 1);
 
 	for_each_memblock(memory, mblk) {
 		ret = numa_add_memblk(0, mblk->base, mblk->base + mblk->size);
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index ca6d268..8def55e 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -139,4 +139,43 @@ void __kernel_map_pages(struct page *page, int numpages, int enable)
 					__pgprot(0),
 					__pgprot(PTE_VALID));
 }
-#endif
+#ifdef CONFIG_HIBERNATION
+/*
+ * When built with CONFIG_DEBUG_PAGEALLOC and CONFIG_HIBERNATION, this function
+ * is used to determine if a linear map page has been marked as not-valid by
+ * CONFIG_DEBUG_PAGEALLOC. Walk the page table and check the PTE_VALID bit.
+ * This is based on kern_addr_valid(), which almost does what we need.
+ *
+ * Because this is only called on the kernel linear map,  p?d_sect() implies
+ * p?d_present(). When debug_pagealloc is enabled, sections mappings are
+ * disabled.
+ */
+bool kernel_page_present(struct page *page)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	unsigned long addr = (unsigned long)page_address(page);
+
+	pgd = pgd_offset_k(addr);
+	if (pgd_none(*pgd))
+		return false;
+
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud))
+		return false;
+	if (pud_sect(*pud))
+		return true;
+
+	pmd = pmd_offset(pud, addr);
+	if (pmd_none(*pmd))
+		return false;
+	if (pmd_sect(*pmd))
+		return true;
+
+	pte = pte_offset_kernel(pmd, addr);
+	return pte_valid(*pte);
+}
+#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_DEBUG_PAGEALLOC */
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
index ae11d4e..371c5f0 100644
--- a/arch/arm64/mm/pgd.c
+++ b/arch/arm64/mm/pgd.c
@@ -26,8 +26,6 @@
 #include <asm/page.h>
 #include <asm/tlbflush.h>
 
-#include "mm.h"
-
 static struct kmem_cache *pgd_cache;
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 9d37e96..352c73b 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -83,6 +83,7 @@ ENDPROC(cpu_do_suspend)
  *
  * x0: Address of context pointer
  */
+	.pushsection ".idmap.text", "ax"
 ENTRY(cpu_do_resume)
 	ldp	x2, x3, [x0]
 	ldp	x4, x5, [x0, #16]
@@ -120,6 +121,7 @@ ENTRY(cpu_do_resume)
 	isb
 	ret
 ENDPROC(cpu_do_resume)
+	.popsection
 #endif
 
 /*
@@ -134,17 +136,12 @@ ENTRY(cpu_do_switch_mm)
 	bfi	x0, x1, #48, #16		// set the ASID
 	msr	ttbr0_el1, x0			// set TTBR0
 	isb
-alternative_if_not ARM64_WORKAROUND_CAVIUM_27456
-	ret
-	nop
-	nop
-	nop
-alternative_else
+alternative_if ARM64_WORKAROUND_CAVIUM_27456
 	ic	iallu
 	dsb	nsh
 	isb
+alternative_else_nop_endif
 	ret
-alternative_endif
 ENDPROC(cpu_do_switch_mm)
 
 	.pushsection ".idmap.text", "ax"
@@ -181,6 +178,7 @@ ENDPROC(idmap_cpu_replace_ttbr1)
  *	Initialise the processor for turning the MMU on.  Return in x0 the
  *	value of the SCTLR_EL1 register.
  */
+	.pushsection ".idmap.text", "ax"
 ENTRY(__cpu_setup)
 	tlbi	vmalle1				// Invalidate local TLB
 	dsb	nsh
@@ -266,3 +264,4 @@ ENDPROC(__cpu_setup)
 crval:
 	.word	0xfcffffff			// clear
 	.word	0x34d5d91d			// set
+	.popsection
diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h
index 68cf638..b1ec1fa 100644
--- a/arch/avr32/include/asm/uaccess.h
+++ b/arch/avr32/include/asm/uaccess.h
@@ -74,7 +74,7 @@ extern __kernel_size_t __copy_user(void *to, const void *from,
 
 extern __kernel_size_t copy_to_user(void __user *to, const void *from,
 				    __kernel_size_t n);
-extern __kernel_size_t copy_from_user(void *to, const void __user *from,
+extern __kernel_size_t ___copy_from_user(void *to, const void __user *from,
 				      __kernel_size_t n);
 
 static inline __kernel_size_t __copy_to_user(void __user *to, const void *from,
@@ -88,6 +88,15 @@ static inline __kernel_size_t __copy_from_user(void *to,
 {
 	return __copy_user(to, (const void __force *)from, n);
 }
+static inline __kernel_size_t copy_from_user(void *to,
+					       const void __user *from,
+					       __kernel_size_t n)
+{
+	size_t res = ___copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
+}
 
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index d93ead0..7c6cf14 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -36,7 +36,7 @@ EXPORT_SYMBOL(copy_page);
 /*
  * Userspace access stuff.
  */
-EXPORT_SYMBOL(copy_from_user);
+EXPORT_SYMBOL(___copy_from_user);
 EXPORT_SYMBOL(copy_to_user);
 EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(strncpy_from_user);
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index 682b247..eb4a3fc 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -11,7 +11,8 @@
 #include <linux/init.h>
 #include <linux/kallsyms.h>
 #include <linux/kdebug.h>
-#include <linux/module.h>
+#include <linux/extable.h>
+#include <linux/module.h>	/* print_modules */
 #include <linux/notifier.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index a458917..17f2730 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -52,6 +52,7 @@ SECTIONS
 		KPROBES_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/avr32/lib/copy_user.S b/arch/avr32/lib/copy_user.S
index ea59c04..0753734 100644
--- a/arch/avr32/lib/copy_user.S
+++ b/arch/avr32/lib/copy_user.S
@@ -23,13 +23,13 @@
 	 */
 	.text
 	.align	1
-	.global	copy_from_user
-	.type	copy_from_user, @function
-copy_from_user:
+	.global	___copy_from_user
+	.type	___copy_from_user, @function
+___copy_from_user:
 	branch_if_kernel r8, __copy_user
 	ret_if_privileged r8, r11, r10, r10
 	rjmp	__copy_user
-	.size	copy_from_user, . - copy_from_user
+	.size	___copy_from_user, . - ___copy_from_user
 
 	.global	copy_to_user
 	.type	copy_to_user, @function
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index a4b7eda..b3977e9 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -10,7 +10,7 @@
  */
 
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/pagemap.h>
 #include <linux/kdebug.h>
 #include <linux/kprobes.h>
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 28c63fe..3c1bd64 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -26,7 +26,7 @@ config BLACKFIN
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select ARCH_HAVE_CUSTOM_GPIO_H
-	select ARCH_REQUIRE_GPIOLIB
+	select GPIOLIB
 	select HAVE_UID16
 	select HAVE_UNDERSCORE_SYMBOL_PREFIX
 	select VIRT_TO_BUS
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 12f5d68..0a2a700 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -171,11 +171,12 @@ static inline int bad_user_access_length(void)
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (access_ok(VERIFY_READ, from, n))
+	if (likely(access_ok(VERIFY_READ, from, n))) {
 		memcpy(to, (const void __force *)from, n);
-	else
-		return n;
-	return 0;
+		return 0;
+	}
+	memset(to, 0, n);
+	return n;
 }
 
 static inline unsigned long __must_check
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index 28d0595..3b8bdcb 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -169,7 +169,7 @@ ENTRY(_ftrace_graph_caller)
 	r0 = sp;	/* unsigned long *parent */
 	r1 = [sp];	/* unsigned long self_addr */
 # endif
-# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+# ifdef HAVE_FUNCTION_GRAPH_FP_TEST
 	r2 = fp;	/* unsigned long frame_pointer */
 # endif
 	r0 += 16;	/* skip the 4 local regs on stack */
@@ -190,7 +190,7 @@ ENTRY(_return_to_handler)
 	[--sp] = r1;
 
 	/* get original return address */
-# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+# ifdef HAVE_FUNCTION_GRAPH_FP_TEST
 	r0 = fp;	/* Blackfin is sane, so omit this */
 # endif
 	call _ftrace_return_to_handler;
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index 095de0fa..8dad758 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -107,7 +107,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 		return;
 
 	if (ftrace_push_return_trace(*parent, self_addr, &trace.depth,
-	                             frame_pointer) == -EBUSY)
+				     frame_pointer, NULL) == -EBUSY)
 		return;
 
 	trace.func = self_addr;
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index d920b95..68069a1 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -33,6 +33,7 @@ SECTIONS
 #ifndef CONFIG_SCHEDULE_L1
 		SCHED_TEXT
 #endif
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		IRQENTRY_TEXT
 		SOFTIRQENTRY_TEXT
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 78ecb50..8a2543c 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -59,18 +59,7 @@ static struct miscdevice coreb_dev = {
 	.name  = "coreb",
 	.fops  = &coreb_fops,
 };
-
-static int __init bf561_coreb_init(void)
-{
-	return misc_register(&coreb_dev);
-}
-module_init(bf561_coreb_init);
-
-static void __exit bf561_coreb_exit(void)
-{
-	misc_deregister(&coreb_dev);
-}
-module_exit(bf561_coreb_exit);
+module_misc_device(coreb_dev);
 
 MODULE_AUTHOR("Bas Vermeulen <bvermeul@blackstar.xs4all.nl>");
 MODULE_DESCRIPTION("BF561 Core B Support");
diff --git a/arch/c6x/kernel/vmlinux.lds.S b/arch/c6x/kernel/vmlinux.lds.S
index 50bc10f..a1a5c16 100644
--- a/arch/c6x/kernel/vmlinux.lds.S
+++ b/arch/c6x/kernel/vmlinux.lds.S
@@ -70,6 +70,7 @@ SECTIONS
 		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		IRQENTRY_TEXT
 		SOFTIRQENTRY_TEXT
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index deba266..71b758d 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -30,7 +30,7 @@ config GENERIC_CALIBRATE_DELAY
 	default y
 
 config NO_IOPORT_MAP
-	def_bool y
+	def_bool y if !PCI
 
 config FORCE_MAX_ZONEORDER
 	int
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index bdc25aa..28292da 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -177,15 +177,6 @@ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
 	},
 };
 
-#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-/* Main flash device */
-static struct mtd_partition main_partition = {
-	.name = "main",
-	.size = 0,
-	.offset = 0
-};
-#endif
-
 /*
  * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
  * chips in that order (because the amd_flash-driver is faster).
@@ -369,16 +360,6 @@ static int __init init_axis_flash(void)
 		pidx++;
 	}
 
-#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-	if (mymtd) {
-		main_partition.size = mymtd->size;
-		err = mtd_device_register(mymtd, &main_partition, 1);
-		if (err)
-			panic("axisflashmap: Could not initialize "
-			      "partition for whole main mtd device!\n");
-	}
-#endif
-
         if (mymtd) {
 		if (use_default_ptable) {
 			printk(KERN_INFO " Using default partition table.\n");
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index f679a19..c903a9e 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -395,7 +395,7 @@ static int eeprom_open(struct inode * inode, struct file * file)
 static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig)
 {
 /*
- *  orig 0: position from begning of eeprom
+ *  orig 0: position from beginning of eeprom
  *  orig 1: relative from current position
  *  orig 2: position from last eeprom address
  */
diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S
index e541d3d..9331012 100644
--- a/arch/cris/arch-v10/lib/dram_init.S
+++ b/arch/cris/arch-v10/lib/dram_init.S
@@ -3,7 +3,7 @@
  * This file is intended to be included from other assembler files
  *
  * Note: This file may not modify r9 because r9 is used to carry
- *       information from the decompresser to the kernel
+ *       information from the decompressor to the kernel
  *
  * Copyright (C) 2000-2012 Axis Communications AB
  *
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index 2081d8b..b5698c8 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -1210,7 +1210,7 @@ static int cryptocop_setup_dma_list(struct cryptocop_operation *operation, struc
 		assert(active_count >= eop_needed_count);
 		assert((eop_needed_count == 0) || (eop_needed_count == 1));
 		if (eop_needed_count) {
-			/* This means that the bulk operation (cipeher/m2m) is terminated. */
+			/* This means that the bulk operation (cipher/m2m) is terminated. */
 			if (active_count > 1) {
 				/* Use zero length EOP descriptor. */
 				struct cryptocop_dma_desc *ed = alloc_cdesc(alloc_flag);
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 64a5fb9..212266a 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -1,6 +1,6 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <arch/hwregs/intr_vect.h>
+#include <hwregs/intr_vect.h>
 
 void pcibios_fixup_bus(struct pci_bus *b)
 {
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index e989cee..ef515af 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -1627,6 +1627,12 @@ static int __init etrax_sync_serial_init(void)
 
 	/* Create a sysfs class for syncser */
 	syncser_class = class_create(THIS_MODULE, "syncser_class");
+	if (IS_ERR(syncser_class)) {
+		pr_err("Failed to create a sysfs class for syncser\n");
+		unregister_chrdev_region(syncser_first, minor_count);
+		cdev_del(syncser_cdev);
+		return -1;
+	}
 
 	/* Initialize Ports */
 #if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 5c84dbb..eb4e0ff 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -318,11 +318,13 @@ timer_trig_interrupt(int irq, void *dev_id)
 
 static void timer_trig_handler(struct work_struct *work)
 {
-  reg_timer_rw_ack_intr ack_intr = { 0 };
-  reg_timer_rw_intr_mask intr_mask;
-  reg_timer_rw_trig_cfg trig_cfg = { 0 };
-  struct fast_timer *t;
-  unsigned long flags;
+	reg_timer_rw_ack_intr ack_intr = { 0 };
+	reg_timer_rw_intr_mask intr_mask;
+	reg_timer_rw_trig_cfg trig_cfg = { 0 };
+	struct fast_timer *t;
+	fast_timer_function_type *f;
+	unsigned long d;
+	unsigned long flags;
 
 	/* We keep interrupts disabled not only when we modify the
 	 * fast timer list, but any time we hold a reference to a
@@ -350,9 +352,6 @@ static void timer_trig_handler(struct work_struct *work)
   fast_timer_running = 0;
   fast_timer_ints++;
 
-	fast_timer_function_type *f;
-	unsigned long d;
-
   t = fast_timer_list;
 	while (t) {
 		struct fasttime_t tv;
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 6de8db6..b07da4b 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -471,9 +471,8 @@ init_IRQ(void)
 	irq_set_default_host(domain);
 	of_node_put(np);
 
-	for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT; i++, j++) {
+	for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT && j < MACH_IRQS; i++, j++)
 		set_exception_vector(i, interrupt[j]);
-	}
 
 	/* Mark Timer and IPI IRQs as CPU local */
 	irq_allocations[TIMER0_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
diff --git a/arch/cris/arch-v32/mach-a3/dma.c b/arch/cris/arch-v32/mach-a3/dma.c
index 47c64bf..11f417f 100644
--- a/arch/cris/arch-v32/mach-a3/dma.c
+++ b/arch/cris/arch-v32/mach-a3/dma.c
@@ -41,7 +41,6 @@ int crisv32_request_dma(unsigned int dmanr, const char *device_id,
 
 		if (options & DMA_PANIC_ON_ERROR)
 			panic("request_dma error!");
-		spin_unlock_irqrestore(&dma_lock, flags);
 		return -EBUSY;
 	}
 	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S
index 5c4f24d..7dc26bd 100644
--- a/arch/cris/arch-v32/mach-a3/dram_init.S
+++ b/arch/cris/arch-v32/mach-a3/dram_init.S
@@ -3,7 +3,7 @@
  * This file is intended to be included from other assembler files
  *
  * Note: This file may not modify r8 or r9 because they are used to
- * carry information from the decompresser to the kernel
+ * carry information from the decompressor to the kernel
  *
  * Copyright (C) 2005-2007 Axis Communications AB
  *
diff --git a/arch/cris/arch-v32/mach-fs/dma.c b/arch/cris/arch-v32/mach-fs/dma.c
index fc6416a..7c93679 100644
--- a/arch/cris/arch-v32/mach-fs/dma.c
+++ b/arch/cris/arch-v32/mach-fs/dma.c
@@ -43,7 +43,6 @@ int crisv32_request_dma(unsigned int dmanr, const char *device_id,
 		}
 		if (options & DMA_PANIC_ON_ERROR)
 			panic("request_dma error!");
-		spin_unlock_irqrestore(&dma_lock, flags);
 		return -EBUSY;
 	}
 	clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
diff --git a/arch/cris/arch-v32/mach-fs/dram_init.S b/arch/cris/arch-v32/mach-fs/dram_init.S
index d3ce2eb..2ed51e2 100644
--- a/arch/cris/arch-v32/mach-fs/dram_init.S
+++ b/arch/cris/arch-v32/mach-fs/dram_init.S
@@ -3,7 +3,7 @@
  * This file is intended to be included from other assembler files
  *
  * Note: This file may not modify r8 or r9 because they are used to
- * carry information from the decompresser to the kernel
+ * carry information from the decompressor to the kernel
  *
  * Copyright (C) 2000-2007 Axis Communications AB
  *
diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c
index 9ef5609..c807284 100644
--- a/arch/cris/arch-v32/mm/intmem.c
+++ b/arch/cris/arch-v32/mm/intmem.c
@@ -113,14 +113,14 @@ void crisv32_intmem_free(void* addr)
 
 			allocation->status = STATUS_FREE;
 			/* Join with prev and/or next if also free */
-			if ((prev != &intmem_allocations) &&
+			if ((&prev->entry != &intmem_allocations) &&
 					(prev->status == STATUS_FREE)) {
 				prev->size += allocation->size;
 				list_del(&allocation->entry);
 				kfree(allocation);
 				allocation = prev;
 			}
-			if ((next != &intmem_allocations) &&
+			if ((&next->entry != &intmem_allocations) &&
 					(next->status == STATUS_FREE)) {
 				allocation->size += next->size;
 				list_del(&next->entry);
@@ -145,5 +145,12 @@ unsigned long crisv32_intmem_virt_to_phys(void* addr)
 		(unsigned long)intmem_virtual + MEM_INTMEM_START +
 		RESERVED_SIZE);
 }
-device_initcall(crisv32_intmem_init);
+
+static int __init crisv32_intmem_setup(void)
+{
+	crisv32_intmem_init();
+
+	return 0;
+}
+device_initcall(crisv32_intmem_setup);
 
diff --git a/arch/cris/configs/artpec_3_defconfig b/arch/cris/configs/artpec_3_defconfig
index 70e497e..d31851f 100644
--- a/arch/cris/configs/artpec_3_defconfig
+++ b/arch/cris/configs/artpec_3_defconfig
@@ -25,7 +25,6 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_MTDRAM=y
 CONFIG_MTDRAM_TOTAL_SIZE=0
 CONFIG_MTDRAM_ERASE_SIZE=64
-CONFIG_MTDRAM_ABS_POS=0x0
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
 # CONFIG_INPUT is not set
diff --git a/arch/cris/configs/dev88_defconfig b/arch/cris/configs/dev88_defconfig
new file mode 100644
index 0000000..beff4ee
--- /dev/null
+++ b/arch/cris/configs/dev88_defconfig
@@ -0,0 +1,48 @@
+CONFIG_BUILTIN_DTB="dev88"
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ETRAX_FAST_TIMER=y
+CONFIG_ETRAXFS=y
+CONFIG_ETRAX_DRAM_SIZE=32
+CONFIG_ETRAX_FLASH1_SIZE=4
+CONFIG_ETRAX_MEM_GRP1_CONFIG=0x40688
+CONFIG_ETRAX_MEM_GRP3_CONFIG=0x3
+CONFIG_ETRAX_MEM_GRP4_CONFIG=0x10040
+CONFIG_ETRAX_SDRAM_GRP0_CONFIG=0x958
+CONFIG_ETRAX_SDRAM_TIMING=0x824a
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_ETRAX_ETHERNET=y
+CONFIG_ETRAX_AXISFLASHMAP=y
+CONFIG_DEVTMPFS=y
+CONFIG_MTD_RAM=y
+CONFIG_MTDRAM_TOTAL_SIZE=0
+CONFIG_MTDRAM_ERASE_SIZE=64
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_ETRAXFS=y
+CONFIG_SERIAL_ETRAXFS_CONSOLE=y
+CONFIG_GPIO_ETRAXFS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
diff --git a/arch/cris/configs/etrax-100lx_v2_defconfig b/arch/cris/configs/etrax-100lx_v2_defconfig
index a85aabf..d90ac95 100644
--- a/arch/cris/configs/etrax-100lx_v2_defconfig
+++ b/arch/cris/configs/etrax-100lx_v2_defconfig
@@ -28,7 +28,6 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_MTDRAM=y
 CONFIG_MTDRAM_TOTAL_SIZE=0
 CONFIG_MTDRAM_ERASE_SIZE=64
-CONFIG_MTDRAM_ABS_POS=0x0
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
 # CONFIG_INPUT is not set
diff --git a/arch/cris/configs/etraxfs_defconfig b/arch/cris/configs/etraxfs_defconfig
index 9123268..f714e9d 100644
--- a/arch/cris/configs/etraxfs_defconfig
+++ b/arch/cris/configs/etraxfs_defconfig
@@ -25,7 +25,6 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_MTDRAM=y
 CONFIG_MTDRAM_TOTAL_SIZE=0
 CONFIG_MTDRAM_ERASE_SIZE=64
-CONFIG_MTDRAM_ABS_POS=0x0
 CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
 # CONFIG_INPUT is not set
diff --git a/arch/cris/include/arch-v32/arch/cryptocop.h b/arch/cris/include/arch-v32/arch/cryptocop.h
index 716e434..a56ac61 100644
--- a/arch/cris/include/arch-v32/arch/cryptocop.h
+++ b/arch/cris/include/arch-v32/arch/cryptocop.h
@@ -81,7 +81,7 @@ struct cryptocop_tfrm_cfg {
 
 	unsigned int flags; /* DECRYPT, ENCRYPT, EXPLICIT_IV */
 
-	/* CBC initialisation vector for cihers. */
+	/* CBC initialisation vector for ciphers. */
 	u8 iv[CRYPTOCOP_MAX_IV_LENGTH];
 
 	/* The position in output where to write the transform output.  The order
diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h
index cce8664..fe0b2a0 100644
--- a/arch/cris/include/asm/io.h
+++ b/arch/cris/include/asm/io.h
@@ -8,34 +8,6 @@
 #include <asm-generic/iomap.h>
 #include <linux/kernel.h>
 
-struct cris_io_operations
-{
-	u32 (*read_mem)(void *addr, int size);
-	void (*write_mem)(u32 val, int size, void *addr);
-	u32 (*read_io)(u32 port, void *addr, int size, int count);
-	void (*write_io)(u32 port, void *addr, int size, int count);
-};
-
-#ifdef CONFIG_PCI
-extern struct cris_io_operations *cris_iops;
-#else
-#define cris_iops ((struct cris_io_operations*)NULL)
-#endif
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-
-static inline unsigned long virt_to_phys(volatile void * address)
-{
-	return __pa(address);
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
-	return __va(address);
-}
-
 extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
 extern void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgprot_t prot);
 
@@ -48,147 +20,6 @@ extern void iounmap(volatile void * __iomem addr);
 
 extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size);
 
-/*
- * IO bus memory addresses are also 1:1 with the physical address
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the CRIS architecture, we just read/write the
- * memory location directly.
- */
-#ifdef CONFIG_PCI
-#define PCI_SPACE(x) ((((unsigned)(x)) & 0x10000000) == 0x10000000)
-#else
-#define PCI_SPACE(x) 0
-#endif
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
-	if (PCI_SPACE(addr) && cris_iops)
-		return cris_iops->read_mem((void*)addr, 1);
-	else
-		return *(volatile unsigned char __force *) addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
-	if (PCI_SPACE(addr) && cris_iops)
-		return cris_iops->read_mem((void*)addr, 2);
-	else
-		return *(volatile unsigned short __force *) addr;
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
-	if (PCI_SPACE(addr) && cris_iops)
-		return cris_iops->read_mem((void*)addr, 4);
-	else
-		return *(volatile unsigned int __force *) addr;
-}
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
-static inline void writeb(unsigned char b, volatile void __iomem *addr)
-{
-	if (PCI_SPACE(addr) && cris_iops)
-		cris_iops->write_mem(b, 1, (void*)addr);
-	else
-		*(volatile unsigned char __force *) addr = b;
-}
-static inline void writew(unsigned short b, volatile void __iomem *addr)
-{
-	if (PCI_SPACE(addr) && cris_iops)
-		cris_iops->write_mem(b, 2, (void*)addr);
-	else
-		*(volatile unsigned short __force *) addr = b;
-}
-static inline void writel(unsigned int b, volatile void __iomem *addr)
-{
-	if (PCI_SPACE(addr) && cris_iops)
-		cris_iops->write_mem(b, 4, (void*)addr);
-	else
-		*(volatile unsigned int __force *) addr = b;
-}
-#define writeb_relaxed(b, addr) writeb(b, addr)
-#define writew_relaxed(b, addr) writew(b, addr)
-#define writel_relaxed(b, addr) writel(b, addr)
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define mmiowb()
-
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-
-/* I/O port access. Normally there is no I/O space on CRIS but when
- * Cardbus/PCI is enabled the request is passed through the bridge.
- */
-
-#define IO_SPACE_LIMIT 0xffff
-#define inb(port) (cris_iops ? cris_iops->read_io(port,NULL,1,1) : 0)
-#define inw(port) (cris_iops ? cris_iops->read_io(port,NULL,2,1) : 0)
-#define inl(port) (cris_iops ? cris_iops->read_io(port,NULL,4,1) : 0)
-#define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0)
-#define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0)
-#define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0)
-static inline void outb(unsigned char data, unsigned int port)
-{
-	if (cris_iops)
-		cris_iops->write_io(port, (void *) &data, 1, 1);
-}
-static inline void outw(unsigned short data, unsigned int port)
-{
-	if (cris_iops)
-		cris_iops->write_io(port, (void *) &data, 2, 1);
-}
-static inline void outl(unsigned int data, unsigned int port)
-{
-	if (cris_iops)
-		cris_iops->write_io(port, (void *) &data, 4, 1);
-}
-static inline void outsb(unsigned int port, const void *addr,
-			 unsigned long count)
-{
-	if (cris_iops)
-		cris_iops->write_io(port, (void *)addr, 1, count);
-}
-static inline void outsw(unsigned int port, const void *addr,
-			 unsigned long count)
-{
-	if (cris_iops)
-		cris_iops->write_io(port, (void *)addr, 2, count);
-}
-static inline void outsl(unsigned int port, const void *addr,
-			 unsigned long count)
-{
-	if (cris_iops)
-		cris_iops->write_io(port, (void *)addr, 4, count);
-}
-
-#define inb_p(port)             inb(port)
-#define inw_p(port)             inw(port)
-#define inl_p(port)             inl(port)
-#define outb_p(val, port)       outb((val), (port))
-#define outw_p(val, port)       outw((val), (port))
-#define outl_p(val, port)       outl((val), (port))
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
+#include <asm-generic/io.h>
 
 #endif
diff --git a/arch/cris/include/asm/uaccess.h b/arch/cris/include/asm/uaccess.h
index e3530d0..56c7d57 100644
--- a/arch/cris/include/asm/uaccess.h
+++ b/arch/cris/include/asm/uaccess.h
@@ -194,30 +194,6 @@ extern unsigned long __copy_user(void __user *to, const void *from, unsigned lon
 extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n);
 extern unsigned long __do_clear_user(void __user *to, unsigned long n);
 
-static inline unsigned long
-__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __copy_user(to, from, n);
-	return n;
-}
-
-static inline unsigned long
-__generic_copy_from_user(void *to, const void __user *from, unsigned long n)
-{
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_user_zeroing(to, from, n);
-	return n;
-}
-
-static inline unsigned long
-__generic_clear_user(void __user *to, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __do_clear_user(to, n);
-	return n;
-}
-
 static inline long
 __strncpy_from_user(char *dst, const char __user *src, long count)
 {
@@ -282,7 +258,7 @@ __constant_copy_from_user(void *to, const void __user *from, unsigned long n)
 	else if (n == 24)
 		__asm_copy_from_user_24(to, from, ret);
 	else
-		ret = __generic_copy_from_user(to, from, n);
+		ret = __copy_user_zeroing(to, from, n);
 
 	return ret;
 }
@@ -333,7 +309,7 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
 	else if (n == 24)
 		__asm_copy_to_user_24(to, from, ret);
 	else
-		ret = __generic_copy_to_user(to, from, n);
+		ret = __copy_user(to, from, n);
 
 	return ret;
 }
@@ -366,26 +342,43 @@ __constant_clear_user(void __user *to, unsigned long n)
 	else if (n == 24)
 		__asm_clear_24(to, ret);
 	else
-		ret = __generic_clear_user(to, n);
+		ret = __do_clear_user(to, n);
 
 	return ret;
 }
 
 
-#define clear_user(to, n)				\
-	(__builtin_constant_p(n) ?			\
-	 __constant_clear_user(to, n) :			\
-	 __generic_clear_user(to, n))
+static inline size_t clear_user(void __user *to, size_t n)
+{
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+	if (__builtin_constant_p(n))
+		return __constant_clear_user(to, n);
+	else
+		return __do_clear_user(to, n);
+}
 
-#define copy_from_user(to, from, n)			\
-	(__builtin_constant_p(n) ?			\
-	 __constant_copy_from_user(to, from, n) :	\
-	 __generic_copy_from_user(to, from, n))
+static inline size_t copy_from_user(void *to, const void __user *from, size_t n)
+{
+	if (unlikely(!access_ok(VERIFY_READ, from, n))) {
+		memset(to, 0, n);
+		return n;
+	}
+	if (__builtin_constant_p(n))
+		return __constant_copy_from_user(to, from, n);
+	else
+		return __copy_user_zeroing(to, from, n);
+}
 
-#define copy_to_user(to, from, n)			\
-	(__builtin_constant_p(n) ?			\
-	 __constant_copy_to_user(to, from, n) :		\
-	 __generic_copy_to_user(to, from, n))
+static inline size_t copy_to_user(void __user *to, const void *from, size_t n)
+{
+	if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+		return n;
+	if (__builtin_constant_p(n))
+		return __constant_copy_to_user(to, from, n);
+	else
+		return __copy_user(to, from, n);
+}
 
 /* We let the __ versions of copy_from/to_user inline, because they're often
  * used in fast paths and have only a small space overhead.
diff --git a/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h b/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h
index 5517f04..c4b6b0e 100644
--- a/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h
+++ b/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h
@@ -61,7 +61,7 @@
 #define IO_WIDTH(reg, field) IO_WIDTH_ (reg##_, field##_)
 #define IO_WIDTH_(reg_, field_) (reg_##_##field_##_WIDTH)
 
-/*--- Obsolete. Kept for backw compatibility. ---*/
+/*--- Obsolete. Kept for backward compatibility. ---*/
 /* Reads (or writes) a byte/uword/udword from the specified mode
    register. */
 #define IO_RD(reg) (*(volatile u32*)(reg))
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 7552c25..9795862 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -43,6 +43,7 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.text.__*)
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 112ef26..94183d3 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -6,7 +6,7 @@
 
 #include <linux/mm.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/wait.h>
 #include <linux/uaccess.h>
 #include <arch/system.h>
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 07d7a7e..a0513d4 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -522,5 +522,6 @@ extern void __init pgtable_cache_init(void);
 #ifndef __ASSEMBLY__
 extern void __init paging_init(void);
 #endif /* !__ASSEMBLY__ */
+#define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ASM_PGTABLE_H */
diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h
index 4377c89..2305142 100644
--- a/arch/frv/include/asm/segment.h
+++ b/arch/frv/include/asm/segment.h
@@ -32,7 +32,6 @@ typedef struct {
 #define get_ds()		(KERNEL_DS)
 #define get_fs()		(__current_thread_info->addr_limit)
 #define segment_eq(a, b)	((a).seg == (b).seg)
-#define __kernel_ds_p()		segment_eq(get_fs(), KERNEL_DS)
 #define get_addr_limit()	(get_fs().seg)
 
 #define set_fs(_x)					\
diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h
index 3ac9a59..c0f4057e 100644
--- a/arch/frv/include/asm/uaccess.h
+++ b/arch/frv/include/asm/uaccess.h
@@ -20,8 +20,6 @@
 #include <asm/segment.h>
 #include <asm/sections.h>
 
-#define HAVE_ARCH_UNMAPPED_AREA	/* we decide where to put mmaps */
-
 #define __ptr(x) ((unsigned long __force *)(x))
 
 #define VERIFY_READ	0
@@ -263,19 +261,25 @@ do {							\
 extern long __memset_user(void *dst, unsigned long count);
 extern long __memcpy_user(void *dst, const void *src, unsigned long count);
 
-#define clear_user(dst,count)			__memset_user(____force(dst), (count))
+#define __clear_user(dst,count)			__memset_user(____force(dst), (count))
 #define __copy_from_user_inatomic(to, from, n)	__memcpy_user((to), ____force(from), (n))
 #define __copy_to_user_inatomic(to, from, n)	__memcpy_user(____force(to), (from), (n))
 
 #else
 
-#define clear_user(dst,count)			(memset(____force(dst), 0, (count)), 0)
+#define __clear_user(dst,count)			(memset(____force(dst), 0, (count)), 0)
 #define __copy_from_user_inatomic(to, from, n)	(memcpy((to), ____force(from), (n)), 0)
 #define __copy_to_user_inatomic(to, from, n)	(memcpy(____force(to), (from), (n)), 0)
 
 #endif
 
-#define __clear_user clear_user
+static inline unsigned long __must_check
+clear_user(void __user *to, unsigned long n)
+{
+	if (likely(__access_ok(to, n)))
+		n = __clear_user(to, n);
+	return n;
+}
 
 static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index 7e958d8..aa6e573 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -63,6 +63,7 @@ SECTIONS
 	*(.text..tlbmiss)
 	TEXT_TEXT
 	SCHED_TEXT
+	CPUIDLE_TEXT
 	LOCK_TEXT
 #ifdef CONFIG_DEBUG_INFO
 	INIT_TEXT
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index cb5dfb0..7f11da1 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -29,6 +29,7 @@ SECTIONS
 	_stext = . ;
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 #if defined(CONFIG_ROMKERNEL)
 		*(.int_redirect)
diff --git a/arch/hexagon/include/asm/uaccess.h b/arch/hexagon/include/asm/uaccess.h
index f000a38..f61cfb2 100644
--- a/arch/hexagon/include/asm/uaccess.h
+++ b/arch/hexagon/include/asm/uaccess.h
@@ -103,7 +103,8 @@ static inline long hexagon_strncpy_from_user(char *dst, const char __user *src,
 {
 	long res = __strnlen_user(src, n);
 
-	/* return from strnlen can't be zero -- that would be rubbish. */
+	if (unlikely(!res))
+		return -EFAULT;
 
 	if (res > n) {
 		copy_from_user(dst, src, n);
diff --git a/arch/hexagon/kernel/vmlinux.lds.S b/arch/hexagon/kernel/vmlinux.lds.S
index 5f268c1..ec87e67 100644
--- a/arch/hexagon/kernel/vmlinux.lds.S
+++ b/arch/hexagon/kernel/vmlinux.lds.S
@@ -50,6 +50,7 @@ SECTIONS
 		_text = .;
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		*(.fixup)
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
index f565ad3..65d4bb2 100644
--- a/arch/ia64/include/asm/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
@@ -269,6 +269,22 @@ static __inline__ long atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
+static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long c, old, dec;
+	c = atomic64_read(v);
+	for (;;) {
+		dec = c - 1;
+		if (unlikely(dec < 0))
+			break;
+		old = atomic64_cmpxchg((v), c, dec);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return dec;
+}
+
 /*
  * Atomically add I to V and return TRUE if the resulting value is
  * negative.
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index 29bd597..c702642 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -56,7 +56,7 @@ struct thread_info {
 #define alloc_thread_stack_node(tsk, node)	((unsigned long *) 0)
 #define task_thread_info(tsk)	((struct thread_info *) 0)
 #endif
-#define free_thread_stack(ti)	/* nothing */
+#define free_thread_stack(tsk)	/* nothing */
 #define task_stack_page(tsk)	((void *)(tsk))
 
 #define __HAVE_THREAD_FUNCTIONS
diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h
index 465c709..bfe1319 100644
--- a/arch/ia64/include/asm/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
@@ -241,8 +241,7 @@ extern unsigned long __must_check __copy_user (void __user *to, const void __use
 static inline unsigned long
 __copy_to_user (void __user *to, const void *from, unsigned long count)
 {
-	if (!__builtin_constant_p(count))
-		check_object_size(from, count, true);
+	check_object_size(from, count, true);
 
 	return __copy_user(to, (__force void __user *) from, count);
 }
@@ -250,8 +249,7 @@ __copy_to_user (void __user *to, const void *from, unsigned long count)
 static inline unsigned long
 __copy_from_user (void *to, const void __user *from, unsigned long count)
 {
-	if (!__builtin_constant_p(count))
-		check_object_size(to, count, false);
+	check_object_size(to, count, false);
 
 	return __copy_user((__force void __user *) to, from, count);
 }
@@ -265,27 +263,22 @@ __copy_from_user (void *to, const void __user *from, unsigned long count)
 	long __cu_len = (n);								\
 											\
 	if (__access_ok(__cu_to, __cu_len, get_fs())) {					\
-		if (!__builtin_constant_p(n))						\
-			check_object_size(__cu_from, __cu_len, true);			\
+		check_object_size(__cu_from, __cu_len, true);			\
 		__cu_len = __copy_user(__cu_to, (__force void __user *)  __cu_from, __cu_len);	\
 	}										\
 	__cu_len;									\
 })
 
-#define copy_from_user(to, from, n)							\
-({											\
-	void *__cu_to = (to);								\
-	const void __user *__cu_from = (from);						\
-	long __cu_len = (n);								\
-											\
-	__chk_user_ptr(__cu_from);							\
-	if (__access_ok(__cu_from, __cu_len, get_fs())) {				\
-		if (!__builtin_constant_p(n))						\
-			check_object_size(__cu_to, __cu_len, false);			\
-		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
-	}										\
-	__cu_len;									\
-})
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	check_object_size(to, n, false);
+	if (likely(__access_ok(from, n, get_fs())))
+		n = __copy_user((__force void __user *) to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
 
 #define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
 
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 92b7bc9..9273e03 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -796,7 +796,7 @@ int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
  *  ACPI based hotplug CPU support
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
-static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	/*
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index eb9220c..9509cc7 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -986,7 +986,7 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 	int cpu = smp_processor_id();
 
 	previous_current = curr_task(cpu);
-	set_curr_task(cpu, current);
+	ia64_set_curr_task(cpu, current);
 	if ((p = strchr(current->comm, ' ')))
 		*p = '\0';
 
@@ -1360,14 +1360,14 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 				cpumask_clear_cpu(i, &mca_cpu);	/* wake next cpu */
 				while (monarch_cpu != -1)
 					cpu_relax();	/* spin until last cpu leaves */
-				set_curr_task(cpu, previous_current);
+				ia64_set_curr_task(cpu, previous_current);
 				ia64_mc_info.imi_rendez_checkin[cpu]
 						= IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
 				return;
 			}
 		}
 	}
-	set_curr_task(cpu, previous_current);
+	ia64_set_curr_task(cpu, previous_current);
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
 	monarch_cpu = -1;	/* This frees the slaves and previous monarchs */
 }
@@ -1729,7 +1729,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 		NOTIFY_INIT(DIE_INIT_SLAVE_LEAVE, regs, (long)&nd, 1);
 
 		mprintk("Slave on cpu %d returning to normal service.\n", cpu);
-		set_curr_task(cpu, previous_current);
+		ia64_set_curr_task(cpu, previous_current);
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
 		atomic_dec(&slaves);
 		return;
@@ -1756,7 +1756,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 
 	mprintk("\nINIT dump complete.  Monarch on cpu %d returning to normal service.\n", cpu);
 	atomic_dec(&monarchs);
-	set_curr_task(cpu, previous_current);
+	ia64_set_curr_task(cpu, previous_current);
 	monarch_cpu = -1;
 	return;
 }
@@ -1890,7 +1890,7 @@ ia64_mca_cpu_init(void *cpu_data)
 							      PAGE_KERNEL)));
 }
 
-static void ia64_mca_cmc_vector_adjust(void *dummy)
+static int ia64_mca_cpu_online(unsigned int cpu)
 {
 	unsigned long flags;
 
@@ -1898,25 +1898,9 @@ static void ia64_mca_cmc_vector_adjust(void *dummy)
 	if (!cmc_polling_enabled)
 		ia64_mca_cmc_vector_enable(NULL);
 	local_irq_restore(flags);
+	return 0;
 }
 
-static int mca_cpu_callback(struct notifier_block *nfb,
-				      unsigned long action,
-				      void *hcpu)
-{
-	switch (action) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		ia64_mca_cmc_vector_adjust(NULL);
-		break;
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block mca_cpu_notifier = {
-	.notifier_call = mca_cpu_callback
-};
-
 /*
  * ia64_mca_init
  *
@@ -2111,15 +2095,13 @@ ia64_mca_late_init(void)
 	if (!mca_init)
 		return 0;
 
-	register_hotcpu_notifier(&mca_cpu_notifier);
-
 	/* Setup the CMCI/P vector and handler */
 	setup_timer(&cmc_poll_timer, ia64_mca_cmc_poll, 0UL);
 
 	/* Unmask/enable the vector */
 	cmc_polling_enabled = 0;
-	schedule_work(&cmc_enable_work);
-
+	cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "ia64/mca:online",
+			  ia64_mca_cpu_online, NULL);
 	IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __func__);
 
 #ifdef CONFIG_ACPI
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index dc506b0..f89d20c 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -46,6 +46,7 @@ SECTIONS {
 		__end_ivt_text = .;
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		*(.gnu.linkonce.t*)
diff --git a/arch/m32r/include/asm/uaccess.h b/arch/m32r/include/asm/uaccess.h
index cac7014..6f89821 100644
--- a/arch/m32r/include/asm/uaccess.h
+++ b/arch/m32r/include/asm/uaccess.h
@@ -219,7 +219,7 @@ extern int fixup_exception(struct pt_regs *regs);
 #define __get_user_nocheck(x, ptr, size)				\
 ({									\
 	long __gu_err = 0;						\
-	unsigned long __gu_val;						\
+	unsigned long __gu_val = 0;					\
 	might_fault();							\
 	__get_user_size(__gu_val, (ptr), (size), __gu_err);		\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 018e4a7..ad1fe56 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -31,6 +31,7 @@ SECTIONS
 	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
+	CPUIDLE_TEXT
 	LOCK_TEXT
 	*(.fixup)
 	*(.gnu.warning)
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 498b567..d140206 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -14,7 +14,6 @@ config M68K
 	select GENERIC_IOMAP
 	select GENERIC_STRNCPY_FROM_USER if MMU
 	select GENERIC_STRNLEN_USER if MMU
-	select FPU if MMU
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
 	select HAVE_FUTEX_CMPXCHG if MMU && FUTEX
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 967260f..d2219f30 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -62,6 +62,7 @@ config MCPU32
 config M68020
 	bool "68020 support"
 	depends on MMU
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68020
@@ -72,6 +73,7 @@ config M68020
 config M68030
 	bool "68030 support"
 	depends on MMU && !MMU_SUN3
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68030
@@ -81,6 +83,7 @@ config M68030
 config M68040
 	bool "68040 support"
 	depends on MMU && !MMU_SUN3
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68LC040
@@ -91,6 +94,7 @@ config M68040
 config M68060
 	bool "68060 support"
 	depends on MMU && !MMU_SUN3
+	select FPU
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68060
@@ -259,6 +263,7 @@ config M547x
 	bool "MCF547x"
 	select M54xx
 	select MMU_COLDFIRE if MMU
+	select FPU if MMU
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
 	select CPU_NO_EFFICIENT_FFS
@@ -268,6 +273,7 @@ config M547x
 config M548x
 	bool "MCF548x"
 	select MMU_COLDFIRE if MMU
+	select FPU if MMU
 	select M54xx
 	select HAVE_CACHE_CB
 	select HAVE_MBAR
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index ec9cc1f..ddb8192 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -396,7 +396,7 @@ void __init config_amiga(void)
 	mach_max_dma_address = 0xffffffff;
 
 	mach_reset           = amiga_reset;
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
 	mach_beep            = amiga_mksound;
 #endif
 
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index cbd5991..97a3c38 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -211,7 +211,7 @@ void __init config_atari(void)
 	arch_gettimeoffset   = atari_gettimeoffset;
 	mach_reset           = atari_reset;
 	mach_max_dma_address = 0xffffff;
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
 	mach_beep          = atari_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index fddfdcc..1e3c7e9 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);
diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S
index 73d92ea..bdb472c 100644
--- a/arch/m68k/coldfire/head.S
+++ b/arch/m68k/coldfire/head.S
@@ -280,10 +280,10 @@ _clear_bss:
 	movel	%d0,m68k_cputype		/* Mark us as a ColdFire */
 	movel	#MMU_COLDFIRE,%d0
 	movel	%d0,m68k_mmutype
-	movel	#FPU_COLDFIRE,%d0
-	movel	%d0,m68k_fputype
-	movel	#MACH_M54XX,%d0
-	movel	%d0,m68k_machtype		/* Mark us as a 54xx machine */
+	movel	#FPUTYPE,%d0
+	movel	%d0,m68k_fputype		/* Mark FPU type */
+	movel	#MACHINE,%d0
+	movel	%d0,m68k_machtype		/* Mark machine type */
 	lea	init_task,%a2			/* Set "current" init task */
 #endif
 
diff --git a/arch/m68k/coldfire/m528x.c b/arch/m68k/coldfire/m528x.c
index 45e947a..12f9e37 100644
--- a/arch/m68k/coldfire/m528x.c
+++ b/arch/m68k/coldfire/m528x.c
@@ -102,14 +102,14 @@ void wildfiremod_halt(void)
 	printk(KERN_INFO "WildFireMod hibernating...\n");
 
 	/* Set portE.5 to Digital IO */
-	MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+	writew(readw(MCFGPIO_PEPAR) & ~(1 << (5 * 2)), MCFGPIO_PEPAR);
 
 	/* Make portE.5 an output */
-	MCF5282_GPIO_DDRE |= (1 << 5);
+	writeb(readb(MCFGPIO_PDDR_E) | (1 << 5), MCFGPIO_PDDR_E);
 
 	/* Now toggle portE.5 from low to high */
-	MCF5282_GPIO_PORTE &= ~(1 << 5);
-	MCF5282_GPIO_PORTE |= (1 << 5);
+	writeb(readb(MCFGPIO_PODR_E) & ~(1 << 5), MCFGPIO_PODR_E);
+	writeb(readb(MCFGPIO_PODR_E) | (1 << 5), MCFGPIO_PODR_E);
 
 	printk(KERN_EMERG "Failed to hibernate. Halting!\n");
 }
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
index 80879a7..2502f63 100644
--- a/arch/m68k/coldfire/m53xx.c
+++ b/arch/m68k/coldfire/m53xx.c
@@ -271,9 +271,6 @@ void __init config_BSP(char *commandp, int size)
 
 #define NAND_FLASH_ADDRESS	(0xD0000000)
 
-int sys_clk_khz = 0;
-int sys_clk_mhz = 0;
-
 void wtm_init(void);
 void scm_init(void);
 void gpio_init(void);
@@ -286,9 +283,8 @@ int  get_sys_clock (void);
 
 asmlinkage void __init sysinit(void)
 {
-	sys_clk_khz = clock_pll(0, 0);
-	sys_clk_mhz = sys_clk_khz/1000;
-	
+	clock_pll(0, 0);
+
 	wtm_init();
 	scm_init();
 	gpio_init();
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
index c32f767..386df3b 100644
--- a/arch/m68k/coldfire/m54xx.c
+++ b/arch/m68k/coldfire/m54xx.c
@@ -25,7 +25,6 @@
 #include <asm/m54xxgpt.h>
 #ifdef CONFIG_MMU
 #include <asm/mmu_context.h>
-#include <linux/pfn.h>
 #endif
 
 /***************************************************************************/
@@ -78,47 +77,10 @@ static void mcf54xx_reset(void)
 
 /***************************************************************************/
 
-#ifdef CONFIG_MMU
-
-unsigned long num_pages;
-
-static void __init mcf54xx_bootmem_alloc(void)
-{
-	unsigned long start_pfn;
-	unsigned long memstart;
-
-	/* _rambase and _ramend will be naturally page aligned */
-	m68k_memory[0].addr = _rambase;
-	m68k_memory[0].size = _ramend - _rambase;
-
-	/* compute total pages in system */
-	num_pages = PFN_DOWN(_ramend - _rambase);
-
-	/* page numbers */
-	memstart = PAGE_ALIGN(_ramstart);
-	min_low_pfn = PFN_DOWN(_rambase);
-	start_pfn = PFN_DOWN(memstart);
-	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
-	high_memory = (void *)_ramend;
-
-	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
-	module_fixup(NULL, __start_fixup, __stop_fixup);
-
-	/* setup bootmem data */
-	m68k_setup_node(0);
-	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
-		min_low_pfn, max_low_pfn);
-	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
-}
-
-#endif /* CONFIG_MMU */
-
-/***************************************************************************/
-
 void __init config_BSP(char *commandp, int size)
 {
 #ifdef CONFIG_MMU
-	mcf54xx_bootmem_alloc();
+	cf_bootmem_alloc();
 	mmu_context_init();
 #endif
 	mach_reset = mcf54xx_reset;
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 8f5b6f7..55be7e3 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -566,6 +566,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -584,6 +586,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 31bded9..365dda66 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -525,6 +525,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -543,6 +545,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 0d7739e..ce3cbfd 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -546,6 +546,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -564,6 +566,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 2cbb5c4..8db496a 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -517,6 +517,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -535,6 +537,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 96102a4..8314156 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -527,6 +527,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -545,6 +547,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 97d88f7..6600270 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -549,6 +549,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -567,6 +569,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index be25ef2..90abfe9 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -629,6 +629,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -647,6 +649,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index a008344..0d502c2 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -517,6 +517,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -535,6 +537,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 6735a25..5930e91 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -517,6 +517,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -535,6 +537,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 780c6e9..74e3ad8 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -540,6 +540,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -558,6 +560,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 44693cf..4ba8606 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -518,6 +518,8 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -536,6 +538,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index ef0071d..c6f4972 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -519,6 +519,8 @@ CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_RSA=m
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_CRYPTD=m
@@ -537,6 +539,7 @@ CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_ANUBIS=m
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
index 8e21326..81c91af 100644
--- a/arch/m68k/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -22,6 +22,12 @@ extern void save_bootinfo(const struct bi_record *bi);
 static inline void save_bootinfo(const struct bi_record *bi) {}
 #endif
 
+#ifdef CONFIG_UBOOT
+void process_uboot_commandline(char *commandp, int size);
+#else
+static inline void process_uboot_commandline(char *commandp, int size) {}
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 
diff --git a/arch/m68k/include/asm/m5441xsim.h b/arch/m68k/include/asm/m5441xsim.h
index cc798ab..64f60be 100644
--- a/arch/m68k/include/asm/m5441xsim.h
+++ b/arch/m68k/include/asm/m5441xsim.h
@@ -10,6 +10,10 @@
 #define CPU_NAME		"COLDFIRE(m5441x)"
 #define CPU_INSTR_PER_JIFFY	2
 #define MCF_BUSCLK		(MCF_CLK / 2)
+#define MACHINE			MACH_M5441X
+#define FPUTYPE			0
+#define IOMEMBASE		0xe0000000
+#define IOMEMSIZE		0x20000000
 
 #include <asm/m54xxacr.h>
 
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
index 59e1710..c6ac05c 100644
--- a/arch/m68k/include/asm/m54xxacr.h
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -94,7 +94,7 @@
  *	register region as non-cacheable. And then we map all our RAM as
  *	cacheable and supervisor access only.
  */
-#define ACR0_MODE	(ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \
+#define ACR0_MODE	(ACR_BA(IOMEMBASE)+ACR_ADMSK(IOMEMSIZE)+ \
 			 ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP)
 #if defined(CONFIG_CACHE_COPYBACK)
 #define ACR1_MODE	(ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index a5fbd17..73d937f 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -8,6 +8,10 @@
 #define	CPU_NAME		"COLDFIRE(m54xx)"
 #define	CPU_INSTR_PER_JIFFY	2
 #define	MCF_BUSCLK		(MCF_CLK / 2)
+#define	MACHINE			MACH_M54XX
+#define	FPUTYPE			FPU_COLDFIRE
+#define	IOMEMBASE		MCF_MBAR
+#define	IOMEMSIZE		0x01000000
 
 #include <asm/m54xxacr.h>
 
diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h
index 8824236..10f9930 100644
--- a/arch/m68k/include/asm/mcfmmu.h
+++ b/arch/m68k/include/asm/mcfmmu.h
@@ -105,6 +105,7 @@ static inline void mmu_write(u32 a, u32 v)
 	__asm__ __volatile__ ("nop");
 }
 
+void cf_bootmem_alloc(void);
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word);
 
 #endif
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
index 2a7a766..926375d 100644
--- a/arch/m68k/include/asm/nettel.h
+++ b/arch/m68k/include/asm/nettel.h
@@ -92,7 +92,7 @@ static __inline__ unsigned int mcf_getppdata(void)
 
 static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
 {
-	write((readw(MCFSIM_PBDAT) & ~mask) | bits, MCFSIM_PBDAT);
+	writew((readw(MCFSIM_PBDAT) & ~mask) | bits, MCFSIM_PBDAT);
 }
 #endif
 
diff --git a/arch/m68k/include/asm/uaccess_no.h b/arch/m68k/include/asm/uaccess_no.h
index 1bdf152..36deeb3 100644
--- a/arch/m68k/include/asm/uaccess_no.h
+++ b/arch/m68k/include/asm/uaccess_no.h
@@ -44,9 +44,6 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 
 /*
  * These are the main single-value transfer routines.  They automatically
diff --git a/arch/m68k/include/uapi/asm/bootinfo.h b/arch/m68k/include/uapi/asm/bootinfo.h
index cdeb26a0..a48cf54 100644
--- a/arch/m68k/include/uapi/asm/bootinfo.h
+++ b/arch/m68k/include/uapi/asm/bootinfo.h
@@ -81,6 +81,7 @@ struct mem_info {
 #define MACH_Q40		10
 #define MACH_SUN3X		11
 #define MACH_M54XX		12
+#define MACH_M5441X		13
 
 
     /*
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index e47778f..8a1c4d3 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_HAS_DMA)	+= dma.o
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_BOOTINFO_PROC)	+= bootinfo_proc.o
+obj-$(CONFIG_UBOOT)		+= uboot.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index c55ff71..4ba1ae7 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -203,11 +203,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 }
 
 /* Fill in the fpu structure for a core dump.  */
-#ifdef CONFIG_FPU
 int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
 {
-	char fpustate[216];
-
 	if (FPU_IS_EMU) {
 		int i;
 
@@ -222,37 +219,40 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu)
 		return 1;
 	}
 
-	/* First dump the fpu context to avoid protocol violation.  */
-	asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
-	if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
-		return 0;
+	if (IS_ENABLED(CONFIG_FPU)) {
+		char fpustate[216];
 
-	if (CPU_IS_COLDFIRE) {
-		asm volatile ("fmovel %/fpiar,%0\n\t"
-			      "fmovel %/fpcr,%1\n\t"
-			      "fmovel %/fpsr,%2\n\t"
-			      "fmovemd %/fp0-%/fp7,%3"
-			      :
-			      : "m" (fpu->fpcntl[0]),
-				"m" (fpu->fpcntl[1]),
-				"m" (fpu->fpcntl[2]),
-				"m" (fpu->fpregs[0])
-			      : "memory");
-	} else {
-		asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
-			      :
-			      : "m" (fpu->fpcntl[0])
-			      : "memory");
-		asm volatile ("fmovemx %/fp0-%/fp7,%0"
-			      :
-			      : "m" (fpu->fpregs[0])
-			      : "memory");
+		/* First dump the fpu context to avoid protocol violation.  */
+		asm volatile ("fsave %0" :: "m" (fpustate[0]) : "memory");
+		if (!CPU_IS_060 ? !fpustate[0] : !fpustate[2])
+			return 0;
+
+		if (CPU_IS_COLDFIRE) {
+			asm volatile ("fmovel %/fpiar,%0\n\t"
+				      "fmovel %/fpcr,%1\n\t"
+				      "fmovel %/fpsr,%2\n\t"
+				      "fmovemd %/fp0-%/fp7,%3"
+				      :
+				      : "m" (fpu->fpcntl[0]),
+					"m" (fpu->fpcntl[1]),
+					"m" (fpu->fpcntl[2]),
+					"m" (fpu->fpregs[0])
+				      : "memory");
+		} else {
+			asm volatile ("fmovem %/fpiar/%/fpcr/%/fpsr,%0"
+				      :
+				      : "m" (fpu->fpcntl[0])
+				      : "memory");
+			asm volatile ("fmovemx %/fp0-%/fp7,%0"
+				      :
+				      : "m" (fpu->fpregs[0])
+				      : "memory");
+		}
 	}
 
 	return 1;
 }
 EXPORT_SYMBOL(dump_fpu);
-#endif /* CONFIG_FPU */
 
 unsigned long get_wchan(struct task_struct *p)
 {
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 5b8ec4d..7a2c212 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -105,7 +105,7 @@ EXPORT_SYMBOL(mach_heartbeat);
 #ifdef CONFIG_M68K_L2_CACHE
 void (*mach_l2_flush) (int);
 #endif
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
 void (*mach_beep)(unsigned int, unsigned int);
 EXPORT_SYMBOL(mach_beep);
 #endif
@@ -245,7 +245,7 @@ void __init setup_arch(char **cmdline_p)
 	 * We should really do our own FPU check at startup.
 	 * [what do we do with buggy 68LC040s? if we have problems
 	 *  with them, we should add a test to check_bugs() below] */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
+#if defined(CONFIG_FPU) && !defined(CONFIG_M68KFPU_EMU_ONLY)
 	/* clear the fpu if we have one */
 	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060|FPU_COLDFIRE)) {
 		volatile int zero = 0;
@@ -274,6 +274,7 @@ void __init setup_arch(char **cmdline_p)
 	strncpy(m68k_command_line, CONFIG_BOOTPARAM_STRING, CL_SIZE);
 	m68k_command_line[CL_SIZE - 1] = 0;
 #endif /* CONFIG_BOOTPARAM */
+	process_uboot_commandline(&m68k_command_line[0], CL_SIZE);
 	*cmdline_p = m68k_command_line;
 	memcpy(boot_command_line, *cmdline_p, CL_SIZE);
 
@@ -341,6 +342,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #ifdef CONFIG_COLDFIRE
 	case MACH_M54XX:
+	case MACH_M5441X:
 		config_BSP(NULL, 0);
 		break;
 #endif
@@ -548,7 +550,7 @@ module_init(proc_hardware_init);
 
 void check_bugs(void)
 {
-#ifndef CONFIG_M68KFPU_EMU
+#if defined(CONFIG_FPU) && !defined(CONFIG_M68KFPU_EMU)
 	if (m68k_fputype == 0) {
 		pr_emerg("*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
 			"WHICH IS REQUIRED BY LINUX/M68K ***\n");
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 9309789..8afe6f6 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -34,6 +34,7 @@
 #include <linux/rtc.h>
 
 #include <asm/setup.h>
+#include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -82,69 +83,6 @@ void (*mach_power_off)(void);
 #define	CPU_INSTR_PER_JIFFY	16
 #endif
 
-#if defined(CONFIG_UBOOT)
-/*
- * parse_uboot_commandline
- *
- * Copies u-boot commandline arguments and store them in the proper linux
- * variables.
- *
- * Assumes:
- *	_init_sp global contains the address in the stack pointer when the
- *	kernel starts (see head.S::_start)
- *
- *	U-Boot calling convention:
- *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
- *
- *	_init_sp can be parsed as such
- *
- *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
- *	_init_sp+04 = &kernel board_info (residual data)
- *	_init_sp+08 = &initrd_start
- *	_init_sp+12 = &initrd_end
- *	_init_sp+16 = &cmd_start
- *	_init_sp+20 = &cmd_end
- *
- *	This also assumes that the memory locations pointed to are still
- *	unmodified. U-boot places them near the end of external SDRAM.
- *
- * Argument(s):
- *	commandp = the linux commandline arg container to fill.
- *	size     = the sizeof commandp.
- *
- * Returns:
- */
-static void __init parse_uboot_commandline(char *commandp, int size)
-{
-	extern unsigned long _init_sp;
-	unsigned long *sp;
-	unsigned long uboot_kbd;
-	unsigned long uboot_initrd_start, uboot_initrd_end;
-	unsigned long uboot_cmd_start, uboot_cmd_end;
-
-
-	sp = (unsigned long *)_init_sp;
-	uboot_kbd = sp[1];
-	uboot_initrd_start = sp[2];
-	uboot_initrd_end = sp[3];
-	uboot_cmd_start = sp[4];
-	uboot_cmd_end = sp[5];
-
-	if (uboot_cmd_start && uboot_cmd_end)
-		strncpy(commandp, (const char *)uboot_cmd_start, size);
-#if defined(CONFIG_BLK_DEV_INITRD)
-	if (uboot_initrd_start && uboot_initrd_end &&
-		(uboot_initrd_end > uboot_initrd_start)) {
-		initrd_start = uboot_initrd_start;
-		initrd_end = uboot_initrd_end;
-		ROOT_DEV = Root_RAM0;
-		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
-			initrd_start, initrd_end);
-	}
-#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
-}
-#endif /* #if defined(CONFIG_UBOOT) */
-
 void __init setup_arch(char **cmdline_p)
 {
 	int bootmap_size;
@@ -164,53 +102,38 @@ void __init setup_arch(char **cmdline_p)
 	command_line[sizeof(command_line) - 1] = 0;
 #endif /* CONFIG_BOOTPARAM */
 
-#if defined(CONFIG_UBOOT)
-	/* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */
-	#if defined(CONFIG_BOOTPARAM)
-		/* Add the whitespace separator */
-		command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' ';
-		/* Parse uboot command line into the rest of the buffer */
-		parse_uboot_commandline(
-			&command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)],
-			(sizeof(command_line) -
-			(strlen(CONFIG_BOOTPARAM_STRING)+1)));
-	/* Only CONFIG_UBOOT defined, create cmdline */
-	#else
-		parse_uboot_commandline(&command_line[0], sizeof(command_line));
-	#endif /* CONFIG_BOOTPARAM */
-	command_line[sizeof(command_line) - 1] = 0;
-#endif /* CONFIG_UBOOT */
+	process_uboot_commandline(&command_line[0], sizeof(command_line));
 
-	printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU_NAME "\n");
+	pr_info("uClinux with CPU " CPU_NAME "\n");
 
 #ifdef CONFIG_UCDIMM
-	printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
+	pr_info("uCdimm by Lineo, Inc. <www.lineo.com>\n");
 #endif
 #ifdef CONFIG_M68VZ328
-	printk(KERN_INFO "M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
+	pr_info("M68VZ328 support by Evan Stawnyczy <e@lineo.ca>\n");
 #endif
 #ifdef CONFIG_COLDFIRE
-	printk(KERN_INFO "COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
+	pr_info("COLDFIRE port done by Greg Ungerer, gerg@snapgear.com\n");
 #ifdef CONFIG_M5307
-	printk(KERN_INFO "Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
+	pr_info("Modified for M5307 by Dave Miller, dmiller@intellistor.com\n");
 #endif
 #ifdef CONFIG_ELITE
-	printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
+	pr_info("Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
 #endif
 #endif
-	printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
+	pr_info("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
 
 #if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 )
-	printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n");
+	pr_info("TRG SuperPilot FLASH card support <info@trgnet.com>\n");
 #endif
 #if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
-	printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
+	pr_info("PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
 #endif
 #ifdef CONFIG_DRAGEN2
-	printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
+	pr_info("DragonEngine II board support by Georges Menie\n");
 #endif
 #ifdef CONFIG_M5235EVB
-	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
+	pr_info("Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)\n");
 #endif
 
 	pr_debug("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index 9202f82..58507ed 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -42,7 +42,7 @@
 #include <linux/personality.h>
 #include <linux/tty.h>
 #include <linux/binfmts.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/tracehook.h>
 
 #include <asm/setup.h>
diff --git a/arch/m68k/kernel/uboot.c b/arch/m68k/kernel/uboot.c
new file mode 100644
index 0000000..b3536a8
--- /dev/null
+++ b/arch/m68k/kernel/uboot.c
@@ -0,0 +1,107 @@
+/*
+ * uboot.c -- uboot arguments support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/rtc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+/*
+ * parse_uboot_commandline
+ *
+ * Copies u-boot commandline arguments and store them in the proper linux
+ * variables.
+ *
+ * Assumes:
+ *	_init_sp global contains the address in the stack pointer when the
+ *	kernel starts (see head.S::_start)
+ *
+ *	U-Boot calling convention:
+ *	(*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ *
+ *	_init_sp can be parsed as such
+ *
+ *	_init_sp+00 = u-boot cmd after jsr into kernel (skip)
+ *	_init_sp+04 = &kernel board_info (residual data)
+ *	_init_sp+08 = &initrd_start
+ *	_init_sp+12 = &initrd_end
+ *	_init_sp+16 = &cmd_start
+ *	_init_sp+20 = &cmd_end
+ *
+ *	This also assumes that the memory locations pointed to are still
+ *	unmodified. U-boot places them near the end of external SDRAM.
+ *
+ * Argument(s):
+ *	commandp = the linux commandline arg container to fill.
+ *	size     = the sizeof commandp.
+ *
+ * Returns:
+ */
+static void __init parse_uboot_commandline(char *commandp, int size)
+{
+	extern unsigned long _init_sp;
+	unsigned long *sp;
+	unsigned long uboot_kbd;
+	unsigned long uboot_initrd_start, uboot_initrd_end;
+	unsigned long uboot_cmd_start, uboot_cmd_end;
+
+	sp = (unsigned long *)_init_sp;
+	uboot_kbd = sp[1];
+	uboot_initrd_start = sp[2];
+	uboot_initrd_end = sp[3];
+	uboot_cmd_start = sp[4];
+	uboot_cmd_end = sp[5];
+
+	if (uboot_cmd_start && uboot_cmd_end)
+		strncpy(commandp, (const char *)uboot_cmd_start, size);
+#if defined(CONFIG_BLK_DEV_INITRD)
+	if (uboot_initrd_start && uboot_initrd_end &&
+	    (uboot_initrd_end > uboot_initrd_start)) {
+		initrd_start = uboot_initrd_start;
+		initrd_end = uboot_initrd_end;
+		ROOT_DEV = Root_RAM0;
+		printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
+			initrd_start, initrd_end);
+	}
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+}
+
+__init void process_uboot_commandline(char *commandp, int size)
+{
+	int len, n;
+
+	n = strnlen(commandp, size);
+	commandp += n;
+	len = size - n;
+	if (len) {
+		/* Add the whitespace separator */
+		*commandp++ = ' ';
+		len--;
+	}
+
+	parse_uboot_commandline(commandp, len);
+	commandp[size - 1] = 0;
+}
diff --git a/arch/m68k/kernel/vmlinux-nommu.lds b/arch/m68k/kernel/vmlinux-nommu.lds
index 06a763f..d2c8abf 100644
--- a/arch/m68k/kernel/vmlinux-nommu.lds
+++ b/arch/m68k/kernel/vmlinux-nommu.lds
@@ -45,6 +45,7 @@ SECTIONS {
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		. = ALIGN(16);
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index d099359..5b5ce1e 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -16,6 +16,7 @@ SECTIONS
 	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
+	CPUIDLE_TEXT
 	LOCK_TEXT
 	*(.fixup)
 	*(.gnu.warning)
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 8080469..fe5ea19 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -16,6 +16,7 @@ SECTIONS
 	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
+	CPUIDLE_TEXT
 	LOCK_TEXT
 	*(.fixup)
 	*(.gnu.warning)
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 2f33a33..e468953 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -162,7 +162,7 @@ void __init config_mac(void)
 	mach_halt = mac_poweroff;
 	mach_power_off = mac_poweroff;
 	mach_max_dma_address = 0xffffffff;
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
 	mach_beep = mac_mksound;
 #endif
 
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index f58fafe..87131cd 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -27,7 +27,7 @@ mm_context_t next_mmu_context;
 unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
 atomic_t nr_free_contexts;
 struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern unsigned long num_pages;
+unsigned long num_pages;
 
 /*
  * ColdFire paging_init derived from sun3.
@@ -150,6 +150,35 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	return 0;
 }
 
+void __init cf_bootmem_alloc(void)
+{
+	unsigned long start_pfn;
+	unsigned long memstart;
+
+	/* _rambase and _ramend will be naturally page aligned */
+	m68k_memory[0].addr = _rambase;
+	m68k_memory[0].size = _ramend - _rambase;
+
+	/* compute total pages in system */
+	num_pages = PFN_DOWN(_ramend - _rambase);
+
+	/* page numbers */
+	memstart = PAGE_ALIGN(_ramstart);
+	min_low_pfn = PFN_DOWN(_rambase);
+	start_pfn = PFN_DOWN(memstart);
+	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
+	high_memory = (void *)_ramend;
+
+	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+	module_fixup(NULL, __start_fixup, __stop_fixup);
+
+	/* setup bootmem data */
+	m68k_setup_node(0);
+	memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
+		min_low_pfn, max_low_pfn);
+	free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
+}
+
 /*
  * Initialize the context management stuff.
  * The following was taken from arch/ppc/mmu_context.c
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index fcb7f05..ea89a24 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -180,7 +180,7 @@ void __init config_q40(void)
 	mach_reset = q40_reset;
 	mach_get_model = q40_get_model;
 
-#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_M68K_BEEP)
 	mach_beep = q40_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
diff --git a/arch/metag/include/asm/uaccess.h b/arch/metag/include/asm/uaccess.h
index 8282cbc..273e612 100644
--- a/arch/metag/include/asm/uaccess.h
+++ b/arch/metag/include/asm/uaccess.h
@@ -204,8 +204,9 @@ extern unsigned long __must_check __copy_user_zeroing(void *to,
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (access_ok(VERIFY_READ, from, n))
+	if (likely(access_ok(VERIFY_READ, from, n)))
 		return __copy_user_zeroing(to, from, n);
+	memset(to, 0, n);
 	return n;
 }
 
diff --git a/arch/metag/kernel/vmlinux.lds.S b/arch/metag/kernel/vmlinux.lds.S
index 150ace9..e6c700e 100644
--- a/arch/metag/kernel/vmlinux.lds.S
+++ b/arch/metag/kernel/vmlinux.lds.S
@@ -21,6 +21,7 @@ SECTIONS
   .text : {
 	TEXT_TEXT
 	SCHED_TEXT
+	CPUIDLE_TEXT
 	LOCK_TEXT
 	KPROBES_TEXT
 	IRQENTRY_TEXT
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 331b0d3..253a67e 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -71,9 +71,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
 #ifndef CONFIG_MMU
 
 /* Check against bounds of physical memory */
@@ -227,7 +224,7 @@ extern long __user_bad(void);
 
 #define __get_user(x, ptr)						\
 ({									\
-	unsigned long __gu_val;						\
+	unsigned long __gu_val = 0;					\
 	/*unsigned long __gu_ptr = (unsigned long)(ptr);*/		\
 	long __gu_err;							\
 	switch (sizeof(*(ptr))) {					\
@@ -373,10 +370,13 @@ extern long __user_bad(void);
 static inline long copy_from_user(void *to,
 		const void __user *from, unsigned long n)
 {
+	unsigned long res = n;
 	might_fault();
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_from_user(to, from, n);
-	return n;
+	if (likely(access_ok(VERIFY_READ, from, n)))
+		res = __copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 #define __copy_to_user(to, from, n)	\
diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c
index fc7b48a..d57563c 100644
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@@ -63,7 +63,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}
 
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0);
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
 	if (err == -EBUSY) {
 		*parent = old;
 		return;
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 0a47f04..289d0e7f 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -33,6 +33,7 @@ SECTIONS {
 		EXIT_TEXT
 		EXIT_CALL
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 81556b8..7f696f9 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -632,10 +632,10 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	}
 }
 
-/* Decide whether to display the domain number in /proc */
+/* Display the domain number in /proc */
 int pci_proc_domain(struct pci_bus *bus)
 {
-	return 0;
+	return pci_domain_nr(bus);
 }
 
 /* This header fixup will do the resource fixup for all devices as they are
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2638856..1a322c8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -30,7 +30,6 @@ config MIPS
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON64
 	select GENERIC_ATOMIC64 if !64BIT
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DMA_API_DEBUG
 	select GENERIC_IRQ_PROBE
@@ -65,6 +64,7 @@ config MIPS
 	select ARCH_CLOCKSOURCE_DATA
 	select HANDLE_DOMAIN_IRQ
 	select HAVE_EXIT_THREAD
+	select HAVE_REGS_AND_STACK_ACCESS_API
 
 menu "Machine selection"
 
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f0e314c..7f975b2 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -113,42 +113,6 @@ config SPINLOCK_TEST
 	help
 	  Add several files to the debugfs to test spinlock speed.
 
-if CPU_MIPSR6
-
-choice
-	prompt "Compact branch policy"
-	default MIPS_COMPACT_BRANCHES_OPTIMAL
-
-config MIPS_COMPACT_BRANCHES_NEVER
-	bool "Never (force delay slot branches)"
-	help
-	  Pass the -mcompact-branches=never flag to the compiler in order to
-	  force it to always emit branches with delay slots, and make no use
-	  of the compact branch instructions introduced by MIPSr6. This is
-	  useful if you suspect there may be an issue with compact branches in
-	  either the compiler or the CPU.
-
-config MIPS_COMPACT_BRANCHES_OPTIMAL
-	bool "Optimal (use where beneficial)"
-	help
-	  Pass the -mcompact-branches=optimal flag to the compiler in order for
-	  it to make use of compact branch instructions where it deems them
-	  beneficial, and use branches with delay slots elsewhere. This is the
-	  default compiler behaviour, and should be used unless you have a
-	  reason to choose otherwise.
-
-config MIPS_COMPACT_BRANCHES_ALWAYS
-	bool "Always (force compact branches)"
-	help
-	  Pass the -mcompact-branches=always flag to the compiler in order to
-	  force it to always emit compact branches, making no use of branch
-	  instructions with delay slots. This can result in more compact code
-	  which may be beneficial in some scenarios.
-
-endchoice
-
-endif # CPU_MIPSR6
-
 config SCACHE_DEBUGFS
 	bool "L2 cache debugfs entries"
 	depends on DEBUG_FS
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index efd7a9d..598ab29 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -203,10 +203,6 @@ endif
 toolchain-virt				:= $(call cc-option-yn,$(mips-cflags) -mvirt)
 cflags-$(toolchain-virt)		+= -DTOOLCHAIN_SUPPORTS_VIRT
 
-cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_NEVER)	+= -mcompact-branches=never
-cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_OPTIMAL)	+= -mcompact-branches=optimal
-cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_ALWAYS)	+= -mcompact-branches=always
-
 #
 # Firmware support
 #
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index 2e73784..cc3a1e3 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -96,7 +96,7 @@ static struct clk * __init ath79_reg_ffclk(const char *name,
 	struct clk *clk;
 
 	clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
-	if (!clk)
+	if (IS_ERR(clk))
 		panic("failed to allocate %s clock structure", name);
 
 	return clk;
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 5a9b87b..c1eb1ff 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -1619,6 +1619,12 @@ static int __init octeon_irq_init_gpio(
 		return -ENOMEM;
 	}
 
+	/*
+	 * Clear the OF_POPULATED flag that was set by of_irq_init()
+	 * so that all GPIO devices will be probed.
+	 */
+	of_node_clear_flag(gpio_node, OF_POPULATED);
+
 	return 0;
 }
 /*
diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c
index b31fbc9..37a932d 100644
--- a/arch/mips/cavium-octeon/octeon-platform.c
+++ b/arch/mips/cavium-octeon/octeon-platform.c
@@ -1059,7 +1059,7 @@ static int __init octeon_publish_devices(void)
 {
 	return of_platform_bus_probe(NULL, octeon_ids, NULL);
 }
-device_initcall(octeon_publish_devices);
+arch_initcall(octeon_publish_devices);
 
 MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
 MODULE_LICENSE("GPL");
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index cb16fcc..5537f95 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -267,6 +267,17 @@ static void octeon_crash_shutdown(struct pt_regs *regs)
 	default_machine_crash_shutdown(regs);
 }
 
+#ifdef CONFIG_SMP
+void octeon_crash_smp_send_stop(void)
+{
+	int cpu;
+
+	/* disable watchdogs */
+	for_each_online_cpu(cpu)
+		cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0);
+}
+#endif
+
 #endif /* CONFIG_KEXEC */
 
 #ifdef CONFIG_CAVIUM_RESERVE32
@@ -911,6 +922,9 @@ void __init prom_init(void)
 	_machine_kexec_shutdown = octeon_shutdown;
 	_machine_crash_shutdown = octeon_crash_shutdown;
 	_machine_kexec_prepare = octeon_kexec_prepare;
+#ifdef CONFIG_SMP
+	_crash_smp_send_stop = octeon_crash_smp_send_stop;
+#endif
 #endif
 
 	octeon_user_io_init();
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 4d457d60..256fe6f 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -380,29 +380,11 @@ static int octeon_update_boot_vector(unsigned int cpu)
 	return 0;
 }
 
-static int octeon_cpu_callback(struct notifier_block *nfb,
-	unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_UP_PREPARE:
-		octeon_update_boot_vector(cpu);
-		break;
-	case CPU_ONLINE:
-		pr_info("Cpu %d online\n", cpu);
-		break;
-	case CPU_DEAD:
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
 static int register_cavium_notifier(void)
 {
-	hotcpu_notifier(octeon_cpu_callback, 0);
-	return 0;
+	return cpuhp_setup_state_nocalls(CPUHP_MIPS_SOC_PREPARE,
+					 "mips/cavium:prepare",
+					 octeon_update_boot_vector, NULL);
 }
 late_initcall(register_cavium_notifier);
 
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index d7b9918..1910223 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -146,7 +146,25 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,cpu_mask_nr_tbl
+		# open coded PTR_LA t1, cpu_mask_nr_tbl
+#if (_MIPS_SZPTR == 32)
+		# open coded la t1, cpu_mask_nr_tbl
+		lui	t1, %hi(cpu_mask_nr_tbl)
+		addiu	t1, %lo(cpu_mask_nr_tbl)
+
+#endif
+#if (_MIPS_SZPTR == 64)
+		# open coded dla t1, cpu_mask_nr_tbl
+		.set	push
+		.set	noat
+		lui	t1, %highest(cpu_mask_nr_tbl)
+		lui	AT, %hi(cpu_mask_nr_tbl)
+		daddiu	t1, t1, %higher(cpu_mask_nr_tbl)
+		daddiu	AT, AT, %lo(cpu_mask_nr_tbl)
+		dsll	t1, 32
+		daddu	t1, t1, AT
+		.set	pop
+#endif
 1:		lw	t2,(t1)
 		nop
 		and	t2,t0
@@ -195,7 +213,25 @@
 		/*
 		 * Find irq with highest priority
 		 */
-		 PTR_LA	t1,asic_mask_nr_tbl
+		# open coded PTR_LA t1,asic_mask_nr_tbl
+#if (_MIPS_SZPTR == 32)
+		# open coded la t1, asic_mask_nr_tbl
+		lui	t1, %hi(asic_mask_nr_tbl)
+		addiu	t1, %lo(asic_mask_nr_tbl)
+
+#endif
+#if (_MIPS_SZPTR == 64)
+		# open coded dla t1, asic_mask_nr_tbl
+		.set	push
+		.set	noat
+		lui	t1, %highest(asic_mask_nr_tbl)
+		lui	AT, %hi(asic_mask_nr_tbl)
+		daddiu	t1, t1, %higher(asic_mask_nr_tbl)
+		daddiu	AT, AT, %lo(asic_mask_nr_tbl)
+		dsll	t1, 32
+		daddu	t1, t1, AT
+		.set	pop
+#endif
 2:		lw	t2,(t1)
 		nop
 		and	t2,t0
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index 56584a6..83054f7 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -157,6 +157,7 @@
 	ldc1	$f28, THREAD_FPR28(\thread)
 	ldc1	$f30, THREAD_FPR30(\thread)
 	ctc1	\tmp, fcr31
+	.set	pop
 	.endm
 
 	.macro	fpu_restore_16odd thread
diff --git a/arch/mips/include/asm/extable.h b/arch/mips/include/asm/extable.h
new file mode 100644
index 0000000..dce7a62
--- /dev/null
+++ b/arch/mips/include/asm/extable.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_EXTABLE_H
+#define _ASM_EXTABLE_H
+
+struct exception_table_entry
+{
+	unsigned long insn;
+	unsigned long nextinsn;
+};
+
+struct pt_regs;
+extern int fixup_exception(struct pt_regs *regs);
+
+#endif
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 15e0fec..6bf10e7 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -51,7 +51,8 @@ extern int cp0_fdc_irq;
 
 extern int get_c0_fdc_int(void);
 
-void arch_trigger_all_cpu_backtrace(bool);
-#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
+void arch_trigger_cpumask_backtrace(const struct cpumask *mask,
+				    bool exclude_self);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 
 #endif /* _ASM_IRQ_H */
diff --git a/arch/mips/include/asm/kexec.h b/arch/mips/include/asm/kexec.h
index ee25ebb..493a3cc 100644
--- a/arch/mips/include/asm/kexec.h
+++ b/arch/mips/include/asm/kexec.h
@@ -45,6 +45,7 @@ extern const unsigned char kexec_smp_wait[];
 extern unsigned long secondary_kexec_args[4];
 extern void (*relocated_kexec_smp_wait) (void *);
 extern atomic_t kexec_ready_to_reboot;
+extern void (*_crash_smp_send_stop)(void);
 #endif
 #endif
 
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index b54bcad..07f58cf 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -107,35 +107,49 @@
 #define KVM_INVALID_INST		0xdeadbeef
 #define KVM_INVALID_ADDR		0xdeadbeef
 
+/*
+ * EVA has overlapping user & kernel address spaces, so user VAs may be >
+ * PAGE_OFFSET. For this reason we can't use the default KVM_HVA_ERR_BAD of
+ * PAGE_OFFSET.
+ */
+
+#define KVM_HVA_ERR_BAD			(-1UL)
+#define KVM_HVA_ERR_RO_BAD		(-2UL)
+
+static inline bool kvm_is_error_hva(unsigned long addr)
+{
+	return IS_ERR_VALUE(addr);
+}
+
 extern atomic_t kvm_mips_instance;
 
 struct kvm_vm_stat {
-	u32 remote_tlb_flush;
+	ulong remote_tlb_flush;
 };
 
 struct kvm_vcpu_stat {
-	u32 wait_exits;
-	u32 cache_exits;
-	u32 signal_exits;
-	u32 int_exits;
-	u32 cop_unusable_exits;
-	u32 tlbmod_exits;
-	u32 tlbmiss_ld_exits;
-	u32 tlbmiss_st_exits;
-	u32 addrerr_st_exits;
-	u32 addrerr_ld_exits;
-	u32 syscall_exits;
-	u32 resvd_inst_exits;
-	u32 break_inst_exits;
-	u32 trap_inst_exits;
-	u32 msa_fpe_exits;
-	u32 fpe_exits;
-	u32 msa_disabled_exits;
-	u32 flush_dcache_exits;
-	u32 halt_successful_poll;
-	u32 halt_attempted_poll;
-	u32 halt_poll_invalid;
-	u32 halt_wakeup;
+	u64 wait_exits;
+	u64 cache_exits;
+	u64 signal_exits;
+	u64 int_exits;
+	u64 cop_unusable_exits;
+	u64 tlbmod_exits;
+	u64 tlbmiss_ld_exits;
+	u64 tlbmiss_st_exits;
+	u64 addrerr_st_exits;
+	u64 addrerr_ld_exits;
+	u64 syscall_exits;
+	u64 resvd_inst_exits;
+	u64 break_inst_exits;
+	u64 trap_inst_exits;
+	u64 msa_fpe_exits;
+	u64 fpe_exits;
+	u64 msa_disabled_exits;
+	u64 flush_dcache_exits;
+	u64 halt_successful_poll;
+	u64 halt_attempted_poll;
+	u64 halt_poll_invalid;
+	u64 halt_wakeup;
 };
 
 struct kvm_arch_memory_slot {
@@ -314,6 +328,9 @@ struct kvm_vcpu_arch {
 	u32 guest_kernel_asid[NR_CPUS];
 	struct mm_struct guest_kernel_mm, guest_user_mm;
 
+	/* Guest ASID of last user mode execution */
+	unsigned int last_user_gasid;
+
 	int last_sched_cpu;
 
 	/* WAIT executed */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h b/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h
index 0cf5ac1..8ff2cbdf 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h
@@ -15,8 +15,8 @@
 static inline bool __should_swizzle_bits(volatile void *a)
 {
 	extern const bool octeon_should_swizzle_table[];
+	u64 did = ((u64)(uintptr_t)a >> 40) & 0xff;
 
-	unsigned long did = ((unsigned long)a >> 40) & 0xff;
 	return octeon_should_swizzle_table[did];
 }
 
@@ -29,7 +29,7 @@ static inline bool __should_swizzle_bits(volatile void *a)
 
 #define __should_swizzle_bits(a)	false
 
-static inline bool __should_swizzle_addr(unsigned long p)
+static inline bool __should_swizzle_addr(u64 p)
 {
 	/* boot bus? */
 	return ((p >> 40) & 0xff) == 0;
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index d1ff774..c68c0cc 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -14,7 +14,6 @@
 #include <linux/io.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/kconfig.h>
 #include <boot_param.h>
 
 /* loongson internal northbridge initialization */
diff --git a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h b/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
index 2f82bfa..c9f5769 100644
--- a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
@@ -11,11 +11,13 @@
 #define CP0_EBASE $15, 1
 
 	.macro  kernel_entry_setup
+#ifdef CONFIG_SMP
 	mfc0	t0, CP0_EBASE
 	andi	t0, t0, 0x3ff		# CPUNum
 	beqz	t0, 1f
 	# CPUs other than zero goto smp_bootstrap
 	j	smp_bootstrap
+#endif /* CONFIG_SMP */
 
 1:
 	.endm
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 58e7874..4fafeef 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -458,10 +458,21 @@ static inline int mips_cm_revision(void)
 static inline unsigned int mips_cm_max_vp_width(void)
 {
 	extern int smp_num_siblings;
+	uint32_t cfg;
 
 	if (mips_cm_revision() >= CM_REV_CM3)
 		return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK;
 
+	if (mips_cm_present()) {
+		/*
+		 * We presume that all cores in the system will have the same
+		 * number of VP(E)s, and if that ever changes then this will
+		 * need revisiting.
+		 */
+		cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
+		return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
+	}
+
 	if (IS_ENABLED(CONFIG_SMP))
 		return smp_num_siblings;
 
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index def9d8d..7dd2dd4 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -660,8 +660,6 @@
 
 #define MIPS_CONF7_IAR		(_ULCAST_(1) << 10)
 #define MIPS_CONF7_AR		(_ULCAST_(1) << 16)
-/* FTLB probability bits for R6 */
-#define MIPS_CONF7_FTLBP_SHIFT	(18)
 
 /* WatchLo* register definitions */
 #define MIPS_WATCHLO_IRW	(_ULCAST_(0x7) << 0)
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index 0aaf9a0..702c273 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -3,7 +3,7 @@
 
 #include <linux/list.h>
 #include <linux/elf.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 
 struct mod_arch_specific {
 	/* Data Bus Error exception tables */
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 70128d3..9e9e944 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -673,8 +673,6 @@ static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 struct file;
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 		unsigned long size, pgprot_t vma_prot);
-int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
-		unsigned long size, pgprot_t *vma_prot);
 #endif
 
 /*
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 11b965f..4daf839 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -14,7 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/thread_info.h>
+#include <linux/string.h>
 #include <asm/asm-eva.h>
+#include <asm/extable.h>
 
 /*
  * The fs value determines whether argument validity checking should be
@@ -1170,6 +1172,8 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
 			__cu_len = __invoke_copy_from_user(__cu_to,	\
 							   __cu_from,	\
 							   __cu_len);   \
+		} else {						\
+			memset(__cu_to, 0, __cu_len);			\
 		}							\
 	}								\
 	__cu_len;							\
@@ -1482,12 +1486,4 @@ static inline long strnlen_user(const char __user *s, long n)
 	return res;
 }
 
-struct exception_table_entry
-{
-	unsigned long insn;
-	unsigned long nextinsn;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
 #endif /* _ASM_UACCESS_H */
diff --git a/arch/mips/include/asm/uprobes.h b/arch/mips/include/asm/uprobes.h
index 34c325c..b86d1ae 100644
--- a/arch/mips/include/asm/uprobes.h
+++ b/arch/mips/include/asm/uprobes.h
@@ -36,23 +36,10 @@ struct arch_uprobe {
 	unsigned long	resume_epc;
 	u32	insn[2];
 	u32	ixol[2];
-	union	mips_instruction orig_inst[MAX_UINSN_BYTES / 4];
 };
 
 struct arch_uprobe_task {
 	unsigned long saved_trap_nr;
 };
 
-extern int arch_uprobe_analyze_insn(struct arch_uprobe *aup,
-	struct mm_struct *mm, unsigned long addr);
-extern int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern int arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-extern bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
-extern int arch_uprobe_exception_notify(struct notifier_block *self,
-	unsigned long val, void *data);
-extern void arch_uprobe_abort_xol(struct arch_uprobe *aup,
-	struct pt_regs *regs);
-extern unsigned long arch_uretprobe_hijack_return_addr(
-	unsigned long trampoline_vaddr, struct pt_regs *regs);
-
 #endif /* __ASM_UPROBES_H */
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index ccdcfcb..655e2fb 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -105,4 +105,9 @@
 #define MAP_HUGE_SHIFT	26
 #define MAP_HUGE_MASK	0x3f
 
+#define PKEY_DISABLE_ACCESS	0x1
+#define PKEY_DISABLE_WRITE	0x2
+#define PKEY_ACCESS_MASK	(PKEY_DISABLE_ACCESS |\
+				 PKEY_DISABLE_WRITE)
+
 #endif /* _ASM_MMAN_H */
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 24ad815..3e940db 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -383,16 +383,20 @@
 #define __NR_copy_file_range		(__NR_Linux + 360)
 #define __NR_preadv2			(__NR_Linux + 361)
 #define __NR_pwritev2			(__NR_Linux + 362)
+#define __NR_pkey_mprotect		(__NR_Linux + 363)
+#define __NR_pkey_alloc			(__NR_Linux + 364)
+#define __NR_pkey_free			(__NR_Linux + 365)
+
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		362
+#define __NR_Linux_syscalls		365
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		362
+#define __NR_O32_Linux_syscalls		365
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -723,16 +727,19 @@
 #define __NR_copy_file_range		(__NR_Linux + 320)
 #define __NR_preadv2			(__NR_Linux + 321)
 #define __NR_pwritev2			(__NR_Linux + 322)
+#define __NR_pkey_mprotect		(__NR_Linux + 323)
+#define __NR_pkey_alloc			(__NR_Linux + 324)
+#define __NR_pkey_free			(__NR_Linux + 325)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		322
+#define __NR_Linux_syscalls		325
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		322
+#define __NR_64_Linux_syscalls		325
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1067,15 +1074,18 @@
 #define __NR_copy_file_range		(__NR_Linux + 324)
 #define __NR_preadv2			(__NR_Linux + 325)
 #define __NR_pwritev2			(__NR_Linux + 326)
+#define __NR_pkey_mprotect		(__NR_Linux + 327)
+#define __NR_pkey_alloc			(__NR_Linux + 328)
+#define __NR_pkey_free			(__NR_Linux + 329)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		326
+#define __NR_Linux_syscalls		329
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		326
+#define __NR_N32_Linux_syscalls		329
 
 #endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index a88d442..dd31754 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -352,7 +352,12 @@ __setup("nohtw", htw_disable);
 static int mips_ftlb_disabled;
 static int mips_has_ftlb_configured;
 
-static int set_ftlb_enable(struct cpuinfo_mips *c, int enable);
+enum ftlb_flags {
+	FTLB_EN		= 1 << 0,
+	FTLB_SET_PROB	= 1 << 1,
+};
+
+static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags);
 
 static int __init ftlb_disable(char *s)
 {
@@ -371,8 +376,6 @@ static int __init ftlb_disable(char *s)
 		return 1;
 	}
 
-	back_to_back_c0_hazard();
-
 	config4 = read_c0_config4();
 
 	/* Check that FTLB has been disabled */
@@ -531,7 +534,7 @@ static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
 		return 3;
 }
 
-static int set_ftlb_enable(struct cpuinfo_mips *c, int enable)
+static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
 {
 	unsigned int config;
 
@@ -542,33 +545,33 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 	case CPU_P6600:
 		/* proAptiv & related cores use Config6 to enable the FTLB */
 		config = read_c0_config6();
-		/* Clear the old probability value */
-		config &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
-		if (enable)
-			/* Enable FTLB */
-			write_c0_config6(config |
-					 (calculate_ftlb_probability(c)
-					  << MIPS_CONF6_FTLBP_SHIFT)
-					 | MIPS_CONF6_FTLBEN);
+
+		if (flags & FTLB_EN)
+			config |= MIPS_CONF6_FTLBEN;
 		else
-			/* Disable FTLB */
-			write_c0_config6(config &  ~MIPS_CONF6_FTLBEN);
+			config &= ~MIPS_CONF6_FTLBEN;
+
+		if (flags & FTLB_SET_PROB) {
+			config &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
+			config |= calculate_ftlb_probability(c)
+				  << MIPS_CONF6_FTLBP_SHIFT;
+		}
+
+		write_c0_config6(config);
+		back_to_back_c0_hazard();
 		break;
 	case CPU_I6400:
-		/* I6400 & related cores use Config7 to configure FTLB */
-		config = read_c0_config7();
-		/* Clear the old probability value */
-		config &= ~(3 << MIPS_CONF7_FTLBP_SHIFT);
-		write_c0_config7(config | (calculate_ftlb_probability(c)
-					   << MIPS_CONF7_FTLBP_SHIFT));
-		break;
+		/* There's no way to disable the FTLB */
+		if (!(flags & FTLB_EN))
+			return 1;
+		return 0;
 	case CPU_LOONGSON3:
 		/* Flush ITLB, DTLB, VTLB and FTLB */
 		write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB |
 			      LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB);
 		/* Loongson-3 cores use Config6 to enable the FTLB */
 		config = read_c0_config6();
-		if (enable)
+		if (flags & FTLB_EN)
 			/* Enable FTLB */
 			write_c0_config6(config & ~MIPS_CONF6_FTLBDIS);
 		else
@@ -788,6 +791,7 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 				       PAGE_SIZE, config4);
 				/* Switch FTLB off */
 				set_ftlb_enable(c, 0);
+				mips_ftlb_disabled = 1;
 				break;
 			}
 			c->tlbsizeftlbsets = 1 <<
@@ -852,7 +856,7 @@ static void decode_configs(struct cpuinfo_mips *c)
 	c->scache.flags = MIPS_CACHE_NOT_PRESENT;
 
 	/* Enable FTLB if present and not disabled */
-	set_ftlb_enable(c, !mips_ftlb_disabled);
+	set_ftlb_enable(c, mips_ftlb_disabled ? 0 : FTLB_EN);
 
 	ok = decode_config0(c);			/* Read Config registers.  */
 	BUG_ON(!ok);				/* Arch spec violation!	 */
@@ -902,6 +906,9 @@ static void decode_configs(struct cpuinfo_mips *c)
 		}
 	}
 
+	/* configure the FTLB write probability */
+	set_ftlb_enable(c, (mips_ftlb_disabled ? 0 : FTLB_EN) | FTLB_SET_PROB);
+
 	mips_probe_watch_registers(c);
 
 #ifndef CONFIG_MIPS_CPS
diff --git a/arch/mips/kernel/crash.c b/arch/mips/kernel/crash.c
index 610f0f3..1723b17 100644
--- a/arch/mips/kernel/crash.c
+++ b/arch/mips/kernel/crash.c
@@ -47,9 +47,14 @@ static void crash_shutdown_secondary(void *passed_regs)
 
 static void crash_kexec_prepare_cpus(void)
 {
+	static int cpus_stopped;
 	unsigned int msecs;
+	unsigned int ncpus;
 
-	unsigned int ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
+	if (cpus_stopped)
+		return;
+
+	ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */
 
 	dump_send_ipi(crash_shutdown_secondary);
 	smp_wmb();
@@ -64,6 +69,17 @@ static void crash_kexec_prepare_cpus(void)
 		cpu_relax();
 		mdelay(1);
 	}
+
+	cpus_stopped = 1;
+}
+
+/* Override the weak function in kernel/panic.c */
+void crash_smp_send_stop(void)
+{
+	if (_crash_smp_send_stop)
+		_crash_smp_send_stop();
+
+	crash_kexec_prepare_cpus();
 }
 
 #else /* !defined(CONFIG_SMP)  */
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 937c54b..30a3b75 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -382,8 +382,8 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	if (unlikely(faulted))
 		goto out;
 
-	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp)
-	    == -EBUSY) {
+	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp,
+				     NULL) == -EBUSY) {
 		*parent_ra_addr = old_parent_ra;
 		return;
 	}
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 17326a9..dc0b296 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -142,9 +142,8 @@ LEAF(__r4k_wait)
 	PTR_LA	k1, __r4k_wait
 	ori	k0, 0x1f	/* 32 byte rollback region */
 	xori	k0, 0x1f
-	bne	k0, k1, 9f
+	bne	k0, k1, \handler
 	MTC0	k0, CP0_EPC
-9:
 	.set pop
 	.endm
 
diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c
index 50980bf3..5972520 100644
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -25,6 +25,7 @@ void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
 #ifdef CONFIG_SMP
 void (*relocated_kexec_smp_wait) (void *);
 atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0);
+void (*_crash_smp_send_stop)(void) = NULL;
 #endif
 
 int
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index c3372ca..0a7e10b 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -1164,7 +1164,9 @@ fpu_emul:
 		regs->regs[31] = r31;
 		regs->cp0_epc = epc;
 		if (!used_math()) {     /* First time FPU user.  */
+			preempt_disable();
 			err = init_fpu();
+			preempt_enable();
 			set_used_math();
 		}
 		lose_fpu(1);    /* Save FPU state for the emulator. */
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 7429ad0..9514e5f 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -569,9 +569,16 @@ static void arch_dump_stack(void *info)
 	dump_stack();
 }
 
-void arch_trigger_all_cpu_backtrace(bool include_self)
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
 {
-	smp_call_function(arch_dump_stack, NULL, 1);
+	long this_cpu = get_cpu();
+
+	if (cpumask_test_cpu(this_cpu, mask) && !exclude_self)
+		dump_stack();
+
+	smp_call_function_many(mask, arch_dump_stack, NULL, 1);
+
+	put_cpu();
 }
 
 int mips_get_process_fp_mode(struct task_struct *task)
@@ -605,14 +612,14 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
 		return -EOPNOTSUPP;
 
 	/* Avoid inadvertently triggering emulation */
-	if ((value & PR_FP_MODE_FR) && cpu_has_fpu &&
-	    !(current_cpu_data.fpu_id & MIPS_FPIR_F64))
+	if ((value & PR_FP_MODE_FR) && raw_cpu_has_fpu &&
+	    !(raw_current_cpu_data.fpu_id & MIPS_FPIR_F64))
 		return -EOPNOTSUPP;
-	if ((value & PR_FP_MODE_FRE) && cpu_has_fpu && !cpu_has_fre)
+	if ((value & PR_FP_MODE_FRE) && raw_cpu_has_fpu && !cpu_has_fre)
 		return -EOPNOTSUPP;
 
 	/* FR = 0 not supported in MIPS R6 */
-	if (!(value & PR_FP_MODE_FR) && cpu_has_fpu && cpu_has_mips_r6)
+	if (!(value & PR_FP_MODE_FR) && raw_cpu_has_fpu && cpu_has_mips_r6)
 		return -EOPNOTSUPP;
 
 	/* Proceed with the mode switch */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index c8e43e0..c29d397 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -597,3 +597,6 @@ EXPORT(sys_call_table)
 	PTR	sys_copy_file_range		/* 4360 */
 	PTR	sys_preadv2
 	PTR	sys_pwritev2
+	PTR	sys_pkey_mprotect
+	PTR	sys_pkey_alloc
+	PTR	sys_pkey_free			/* 4365 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index e6ede12..0687f96 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -435,4 +435,7 @@ EXPORT(sys_call_table)
 	PTR	sys_copy_file_range		/* 5320 */
 	PTR	sys_preadv2
 	PTR	sys_pwritev2
+	PTR	sys_pkey_mprotect
+	PTR	sys_pkey_alloc
+	PTR	sys_pkey_free			/* 5325 */
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 51d3988..0331ba3 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -430,4 +430,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_copy_file_range
 	PTR	compat_sys_preadv2		/* 6325 */
 	PTR	compat_sys_pwritev2
+	PTR	sys_pkey_mprotect
+	PTR	sys_pkey_alloc
+	PTR	sys_pkey_free
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 6efa713..5a47042 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -585,4 +585,7 @@ EXPORT(sys32_call_table)
 	PTR	sys_copy_file_range		/* 4360 */
 	PTR	compat_sys_preadv2
 	PTR	compat_sys_pwritev2
+	PTR	sys_pkey_mprotect
+	PTR	sys_pkey_alloc
+	PTR	sys_pkey_free			/* 4365 */
 	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 36cf8d6..0d57909 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -87,6 +87,13 @@ void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type)
 	int x = boot_mem_map.nr_map;
 	int i;
 
+	/*
+	 * If the region reaches the top of the physical address space, adjust
+	 * the size slightly so that (start + size) doesn't overflow
+	 */
+	if (start + size - 1 == (phys_addr_t)ULLONG_MAX)
+		--size;
+
 	/* Sanity check */
 	if (start + size < start) {
 		pr_warn("Trying to add an invalid memory region, skipped\n");
@@ -757,7 +764,6 @@ static void __init arch_mem_init(char **cmdline_p)
 	device_tree_init();
 	sparse_init();
 	plat_swiotlb_setup();
-	paging_init();
 
 	dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
 	/* Tell bootmem about cma reserved memblock section */
@@ -870,6 +876,7 @@ void __init setup_arch(char **cmdline_p)
 	prefill_possible_map();
 
 	cpu_cache_init();
+	paging_init();
 }
 
 unsigned long kernelsp[NR_CPUS];
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index e9d9fc6..6183ad8 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -513,7 +513,7 @@ static void cps_cpu_die(unsigned int cpu)
 		 * in which case the CPC will refuse to power down the core.
 		 */
 		do {
-			mips_cm_lock_other(core, vpe_id);
+			mips_cm_lock_other(core, 0);
 			mips_cpc_lock_other(core);
 			stat = read_cpc_co_stat_conf();
 			stat &= CPC_Cx_STAT_CONF_SEQSTATE_MSK;
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index f95f094..b0baf48 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -322,6 +322,9 @@ asmlinkage void start_secondary(void)
 	cpumask_set_cpu(cpu, &cpu_coherent_mask);
 	notify_cpu_starting(cpu);
 
+	cpumask_set_cpu(cpu, &cpu_callin_map);
+	synchronise_count_slave(cpu);
+
 	set_cpu_online(cpu, true);
 
 	set_cpu_sibling_map(cpu);
@@ -329,10 +332,6 @@ asmlinkage void start_secondary(void)
 
 	calculate_cpu_foreign_map();
 
-	cpumask_set_cpu(cpu, &cpu_callin_map);
-
-	synchronise_count_slave(cpu);
-
 	/*
 	 * irq will be enabled in ->smp_finish(), enabling it too early
 	 * is dangerous.
diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c
index 8452d93..4c7c155 100644
--- a/arch/mips/kernel/uprobes.c
+++ b/arch/mips/kernel/uprobes.c
@@ -157,7 +157,6 @@ bool is_trap_insn(uprobe_opcode_t *insn)
 int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs)
 {
 	struct uprobe_task *utask = current->utask;
-	union mips_instruction insn;
 
 	/*
 	 * Now find the EPC where to resume after the breakpoint has been
@@ -168,10 +167,10 @@ int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs)
 		unsigned long epc;
 
 		epc = regs->cp0_epc;
-		__compute_return_epc_for_insn(regs, insn);
+		__compute_return_epc_for_insn(regs,
+			(union mips_instruction) aup->insn[0]);
 		aup->resume_epc = regs->cp0_epc;
 	}
-
 	utask->autask.saved_trap_nr = current->thread.trap_nr;
 	current->thread.trap_nr = UPROBE_TRAP_NR;
 	regs->cp0_epc = current->utask->xol_vaddr;
@@ -222,7 +221,7 @@ int arch_uprobe_exception_notify(struct notifier_block *self,
 		return NOTIFY_DONE;
 
 	switch (val) {
-	case DIE_BREAK:
+	case DIE_UPROBE:
 		if (uprobe_pre_sstep_notifier(regs))
 			return NOTIFY_STOP;
 		break;
@@ -257,7 +256,7 @@ unsigned long arch_uretprobe_hijack_return_addr(
 	ra = regs->regs[31];
 
 	/* Replace the return address with the trampoline address */
-	regs->regs[31] = ra;
+	regs->regs[31] = trampoline_vaddr;
 
 	return ra;
 }
@@ -280,24 +279,6 @@ int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm,
 	return uprobe_write_opcode(mm, vaddr, UPROBE_SWBP_INSN);
 }
 
-/**
- * set_orig_insn - Restore the original instruction.
- * @mm: the probed process address space.
- * @auprobe: arch specific probepoint information.
- * @vaddr: the virtual address to insert the opcode.
- *
- * For mm @mm, restore the original opcode (opcode) at @vaddr.
- * Return 0 (success) or a negative errno.
- *
- * This overrides the weak version in kernel/events/uprobes.c.
- */
-int set_orig_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
-		 unsigned long vaddr)
-{
-	return uprobe_write_opcode(mm, vaddr,
-			*(uprobe_opcode_t *)&auprobe->orig_inst[0].word);
-}
-
 void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
 				  void *src, unsigned long len)
 {
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index 9abe447..f9dbfb1 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -39,16 +39,16 @@ static struct vm_special_mapping vdso_vvar_mapping = {
 static void __init init_vdso_image(struct mips_vdso_image *image)
 {
 	unsigned long num_pages, i;
+	unsigned long data_pfn;
 
 	BUG_ON(!PAGE_ALIGNED(image->data));
 	BUG_ON(!PAGE_ALIGNED(image->size));
 
 	num_pages = image->size / PAGE_SIZE;
 
-	for (i = 0; i < num_pages; i++) {
-		image->mapping.pages[i] =
-			virt_to_page(image->data + (i * PAGE_SIZE));
-	}
+	data_pfn = __phys_to_pfn(__pa_symbol(image->data));
+	for (i = 0; i < num_pages; i++)
+		image->mapping.pages[i] = pfn_to_page(data_pfn + i);
 }
 
 static int __init init_vdso(void)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index a82c178..d5de675 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -55,6 +55,7 @@ SECTIONS
 	.text : {
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index e788515..4db4c03 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -846,6 +846,47 @@ enum emulation_result kvm_mips_emul_tlbr(struct kvm_vcpu *vcpu)
 	return EMULATE_FAIL;
 }
 
+/**
+ * kvm_mips_invalidate_guest_tlb() - Indicates a change in guest MMU map.
+ * @vcpu:	VCPU with changed mappings.
+ * @tlb:	TLB entry being removed.
+ *
+ * This is called to indicate a single change in guest MMU mappings, so that we
+ * can arrange TLB flushes on this and other CPUs.
+ */
+static void kvm_mips_invalidate_guest_tlb(struct kvm_vcpu *vcpu,
+					  struct kvm_mips_tlb *tlb)
+{
+	int cpu, i;
+	bool user;
+
+	/* No need to flush for entries which are already invalid */
+	if (!((tlb->tlb_lo[0] | tlb->tlb_lo[1]) & ENTRYLO_V))
+		return;
+	/* User address space doesn't need flushing for KSeg2/3 changes */
+	user = tlb->tlb_hi < KVM_GUEST_KSEG0;
+
+	preempt_disable();
+
+	/*
+	 * Probe the shadow host TLB for the entry being overwritten, if one
+	 * matches, invalidate it
+	 */
+	kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi);
+
+	/* Invalidate the whole ASID on other CPUs */
+	cpu = smp_processor_id();
+	for_each_possible_cpu(i) {
+		if (i == cpu)
+			continue;
+		if (user)
+			vcpu->arch.guest_user_asid[i] = 0;
+		vcpu->arch.guest_kernel_asid[i] = 0;
+	}
+
+	preempt_enable();
+}
+
 /* Write Guest TLB Entry @ Index */
 enum emulation_result kvm_mips_emul_tlbwi(struct kvm_vcpu *vcpu)
 {
@@ -865,11 +906,8 @@ enum emulation_result kvm_mips_emul_tlbwi(struct kvm_vcpu *vcpu)
 	}
 
 	tlb = &vcpu->arch.guest_tlb[index];
-	/*
-	 * Probe the shadow host TLB for the entry being overwritten, if one
-	 * matches, invalidate it
-	 */
-	kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi);
+
+	kvm_mips_invalidate_guest_tlb(vcpu, tlb);
 
 	tlb->tlb_mask = kvm_read_c0_guest_pagemask(cop0);
 	tlb->tlb_hi = kvm_read_c0_guest_entryhi(cop0);
@@ -898,11 +936,7 @@ enum emulation_result kvm_mips_emul_tlbwr(struct kvm_vcpu *vcpu)
 
 	tlb = &vcpu->arch.guest_tlb[index];
 
-	/*
-	 * Probe the shadow host TLB for the entry being overwritten, if one
-	 * matches, invalidate it
-	 */
-	kvm_mips_host_tlb_inv(vcpu, tlb->tlb_hi);
+	kvm_mips_invalidate_guest_tlb(vcpu, tlb);
 
 	tlb->tlb_mask = kvm_read_c0_guest_pagemask(cop0);
 	tlb->tlb_hi = kvm_read_c0_guest_entryhi(cop0);
@@ -1026,6 +1060,7 @@ enum emulation_result kvm_mips_emulate_CP0(union mips_instruction inst,
 	enum emulation_result er = EMULATE_DONE;
 	u32 rt, rd, sel;
 	unsigned long curr_pc;
+	int cpu, i;
 
 	/*
 	 * Update PC and hold onto current PC in case there is
@@ -1127,16 +1162,31 @@ enum emulation_result kvm_mips_emulate_CP0(union mips_instruction inst,
 			} else if (rd == MIPS_CP0_TLB_HI && sel == 0) {
 				u32 nasid =
 					vcpu->arch.gprs[rt] & KVM_ENTRYHI_ASID;
-				if ((KSEGX(vcpu->arch.gprs[rt]) != CKSEG0) &&
-				    ((kvm_read_c0_guest_entryhi(cop0) &
+				if (((kvm_read_c0_guest_entryhi(cop0) &
 				      KVM_ENTRYHI_ASID) != nasid)) {
 					trace_kvm_asid_change(vcpu,
 						kvm_read_c0_guest_entryhi(cop0)
 							& KVM_ENTRYHI_ASID,
 						nasid);
 
-					/* Blow away the shadow host TLBs */
-					kvm_mips_flush_host_tlb(1);
+					/*
+					 * Regenerate/invalidate kernel MMU
+					 * context.
+					 * The user MMU context will be
+					 * regenerated lazily on re-entry to
+					 * guest user if the guest ASID actually
+					 * changes.
+					 */
+					preempt_disable();
+					cpu = smp_processor_id();
+					kvm_get_new_mmu_context(&vcpu->arch.guest_kernel_mm,
+								cpu, vcpu);
+					vcpu->arch.guest_kernel_asid[cpu] =
+						vcpu->arch.guest_kernel_mm.context.asid[cpu];
+					for_each_possible_cpu(i)
+						if (i != cpu)
+							vcpu->arch.guest_kernel_asid[i] = 0;
+					preempt_enable();
 				}
 				kvm_write_c0_guest_entryhi(cop0,
 							   vcpu->arch.gprs[rt]);
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index a6ea084..ce96149 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -140,6 +140,16 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	return 0;
 }
 
+bool kvm_arch_has_vcpu_debugfs(void)
+{
+	return false;
+}
+
+int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+
 void kvm_mips_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
@@ -411,6 +421,31 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -ENOIOCTLCMD;
 }
 
+/* Must be called with preemption disabled, just before entering guest */
+static void kvm_mips_check_asids(struct kvm_vcpu *vcpu)
+{
+	struct mips_coproc *cop0 = vcpu->arch.cop0;
+	int cpu = smp_processor_id();
+	unsigned int gasid;
+
+	/*
+	 * Lazy host ASID regeneration for guest user mode.
+	 * If the guest ASID has changed since the last guest usermode
+	 * execution, regenerate the host ASID so as to invalidate stale TLB
+	 * entries.
+	 */
+	if (!KVM_GUEST_KERNEL_MODE(vcpu)) {
+		gasid = kvm_read_c0_guest_entryhi(cop0) & KVM_ENTRYHI_ASID;
+		if (gasid != vcpu->arch.last_user_gasid) {
+			kvm_get_new_mmu_context(&vcpu->arch.guest_user_mm, cpu,
+						vcpu);
+			vcpu->arch.guest_user_asid[cpu] =
+				vcpu->arch.guest_user_mm.context.asid[cpu];
+			vcpu->arch.last_user_gasid = gasid;
+		}
+	}
+}
+
 int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	int r = 0;
@@ -438,6 +473,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	htw_stop();
 
 	trace_kvm_enter(vcpu);
+
+	kvm_mips_check_asids(vcpu);
+
 	r = vcpu->arch.vcpu_run(run, vcpu);
 	trace_kvm_out(vcpu);
 
@@ -1551,6 +1589,8 @@ skip_emul:
 	if (ret == RESUME_GUEST) {
 		trace_kvm_reenter(vcpu);
 
+		kvm_mips_check_asids(vcpu);
+
 		/*
 		 * If FPU / MSA are enabled (i.e. the guest's FPU / MSA context
 		 * is live), restore FCR31 / MSACSR.
diff --git a/arch/mips/kvm/mmu.c b/arch/mips/kvm/mmu.c
index 121008c..03883ba 100644
--- a/arch/mips/kvm/mmu.c
+++ b/arch/mips/kvm/mmu.c
@@ -250,15 +250,27 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		kvm_get_new_mmu_context(&vcpu->arch.guest_kernel_mm, cpu, vcpu);
 		vcpu->arch.guest_kernel_asid[cpu] =
 		    vcpu->arch.guest_kernel_mm.context.asid[cpu];
+		newasid++;
+
+		kvm_debug("[%d]: cpu_context: %#lx\n", cpu,
+			  cpu_context(cpu, current->mm));
+		kvm_debug("[%d]: Allocated new ASID for Guest Kernel: %#x\n",
+			  cpu, vcpu->arch.guest_kernel_asid[cpu]);
+	}
+
+	if ((vcpu->arch.guest_user_asid[cpu] ^ asid_cache(cpu)) &
+						asid_version_mask(cpu)) {
+		u32 gasid = kvm_read_c0_guest_entryhi(vcpu->arch.cop0) &
+				KVM_ENTRYHI_ASID;
+
 		kvm_get_new_mmu_context(&vcpu->arch.guest_user_mm, cpu, vcpu);
 		vcpu->arch.guest_user_asid[cpu] =
 		    vcpu->arch.guest_user_mm.context.asid[cpu];
+		vcpu->arch.last_user_gasid = gasid;
 		newasid++;
 
 		kvm_debug("[%d]: cpu_context: %#lx\n", cpu,
 			  cpu_context(cpu, current->mm));
-		kvm_debug("[%d]: Allocated new ASID for Guest Kernel: %#x\n",
-			  cpu, vcpu->arch.guest_kernel_asid[cpu]);
 		kvm_debug("[%d]: Allocated new ASID for Guest User: %#x\n", cpu,
 			  vcpu->arch.guest_user_asid[cpu]);
 	}
diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c
index 0915539..3a5484f 100644
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -175,6 +175,24 @@ static int kvm_trap_emul_handle_tlb_miss(struct kvm_vcpu *vcpu, bool store)
 			run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 			ret = RESUME_HOST;
 		}
+	} else if (KVM_GUEST_KERNEL_MODE(vcpu)
+		   && (KSEGX(badvaddr) == CKSEG0 || KSEGX(badvaddr) == CKSEG1)) {
+		/*
+		 * With EVA we may get a TLB exception instead of an address
+		 * error when the guest performs MMIO to KSeg1 addresses.
+		 */
+		kvm_debug("Emulate %s MMIO space\n",
+			  store ? "Store to" : "Load from");
+		er = kvm_mips_emulate_inst(cause, opc, run, vcpu);
+		if (er == EMULATE_FAIL) {
+			kvm_err("Emulate %s MMIO space failed\n",
+				store ? "Store to" : "Load from");
+			run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+			ret = RESUME_HOST;
+		} else {
+			run->exit_reason = KVM_EXIT_MMIO;
+			ret = RESUME_HOST;
+		}
 	} else {
 		kvm_err("Illegal TLB %s fault address , cause %#x, PC: %p, BadVaddr: %#lx\n",
 			store ? "ST" : "LD", cause, opc, badvaddr);
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
index 27533c1..dd292dc 100644
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@@ -16,6 +16,7 @@
 
 #include <linux/timer.h>
 #include <linux/mutex.h>
+#include <linux/uaccess.h>
 
 #include "picvue.h"
 
diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c
index 2fec6f7..99aab9f 100644
--- a/arch/mips/loongson64/loongson-3/smp.c
+++ b/arch/mips/loongson64/loongson-3/smp.c
@@ -677,7 +677,7 @@ void play_dead(void)
 	play_dead_at_ckseg1(state_addr);
 }
 
-void loongson3_disable_clock(int cpu)
+static int loongson3_disable_clock(unsigned int cpu)
 {
 	uint64_t core_id = cpu_data[cpu].core;
 	uint64_t package_id = cpu_data[cpu].package;
@@ -688,9 +688,10 @@ void loongson3_disable_clock(int cpu)
 		if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
 			LOONGSON_FREQCTRL(package_id) &= ~(1 << (core_id * 4 + 3));
 	}
+	return 0;
 }
 
-void loongson3_enable_clock(int cpu)
+static int loongson3_enable_clock(unsigned int cpu)
 {
 	uint64_t core_id = cpu_data[cpu].core;
 	uint64_t package_id = cpu_data[cpu].package;
@@ -701,34 +702,15 @@ void loongson3_enable_clock(int cpu)
 		if (!(loongson_sysconf.workarounds & WORKAROUND_CPUHOTPLUG))
 			LOONGSON_FREQCTRL(package_id) |= 1 << (core_id * 4 + 3);
 	}
-}
-
-#define CPU_POST_DEAD_FROZEN	(CPU_POST_DEAD | CPU_TASKS_FROZEN)
-static int loongson3_cpu_callback(struct notifier_block *nfb,
-	unsigned long action, void *hcpu)
-{
-	unsigned int cpu = (unsigned long)hcpu;
-
-	switch (action) {
-	case CPU_POST_DEAD:
-	case CPU_POST_DEAD_FROZEN:
-		pr_info("Disable clock for CPU#%d\n", cpu);
-		loongson3_disable_clock(cpu);
-		break;
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-		pr_info("Enable clock for CPU#%d\n", cpu);
-		loongson3_enable_clock(cpu);
-		break;
-	}
-
-	return NOTIFY_OK;
+	return 0;
 }
 
 static int register_loongson3_notifier(void)
 {
-	hotcpu_notifier(loongson3_cpu_callback, 0);
-	return 0;
+	return cpuhp_setup_state_nocalls(CPUHP_MIPS_SOC_PREPARE,
+					 "mips/loongson:prepare",
+					 loongson3_enable_clock,
+					 loongson3_disable_clock);
 }
 early_initcall(register_loongson3_notifier);
 
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 36775d2..f8b7bf8 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -35,7 +35,6 @@
  */
 #include <linux/sched.h>
 #include <linux/debugfs.h>
-#include <linux/kconfig.h>
 #include <linux/percpu-defs.h>
 #include <linux/perf_event.h>
 
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index 72a4642..4a094f7 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -298,5 +298,6 @@ bool do_dsemulret(struct pt_regs *xcp)
 	/* Set EPC to return to post-branch instruction */
 	xcp->cp0_epc = current->thread.bd_emu_cont_pc;
 	pr_debug("dsemulret to 0x%08lx\n", xcp->cp0_epc);
+	MIPS_FPU_EMU_INC_STATS(ds_emul);
 	return true;
 }
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index cd72805..fa7d8d3 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -800,7 +800,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 		 * If address-based cache ops don't require an SMP call, then
 		 * use them exclusively for small flushes.
 		 */
-		size = start - end;
+		size = end - start;
 		cache_size = icache_size;
 		if (!cpu_has_ic_fills_f_dc) {
 			size *= 2;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index a5509e7..72f7478 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -261,7 +261,6 @@ unsigned __weak platform_maar_init(unsigned num_pairs)
 {
 	struct maar_config cfg[BOOT_MEM_MAP_MAX];
 	unsigned i, num_configured, num_cfg = 0;
-	phys_addr_t skip;
 
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
 		switch (boot_mem_map.map[i].type) {
@@ -272,14 +271,14 @@ unsigned __weak platform_maar_init(unsigned num_pairs)
 			continue;
 		}
 
-		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
-
+		/* Round lower up */
 		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
-		cfg[num_cfg].lower += skip;
+		cfg[num_cfg].lower = (cfg[num_cfg].lower + 0xffff) & ~0xffff;
 
-		cfg[num_cfg].upper = cfg[num_cfg].lower;
-		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
-		cfg[num_cfg].upper -= skip;
+		/* Round upper down */
+		cfg[num_cfg].upper = boot_mem_map.map[i].addr +
+					boot_mem_map.map[i].size;
+		cfg[num_cfg].upper = (cfg[num_cfg].upper & ~0xffff) - 1;
 
 		cfg[num_cfg].attrs = MIPS_MAAR_S;
 		num_cfg++;
@@ -441,6 +440,9 @@ static inline void mem_init_free_highmem(void)
 #ifdef CONFIG_HIGHMEM
 	unsigned long tmp;
 
+	if (cpu_has_dc_aliases)
+		return;
+
 	for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
 		struct page *page = pfn_to_page(tmp);
 
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index ec5b216..7e7364b 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -39,6 +39,9 @@
 #include <linux/console.h>
 #endif
 
+#define ROCIT_CONFIG_GEN0		0x1f403000
+#define  ROCIT_CONFIG_GEN0_PCI_IOCU	BIT(7)
+
 extern void malta_be_init(void);
 extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
 
@@ -107,6 +110,8 @@ static void __init fd_activate(void)
 static int __init plat_enable_iocoherency(void)
 {
 	int supported = 0;
+	u32 cfg;
+
 	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) {
 		if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
 			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
@@ -129,7 +134,8 @@ static int __init plat_enable_iocoherency(void)
 	} else if (mips_cm_numiocu() != 0) {
 		/* Nothing special needs to be done to enable coherency */
 		pr_info("CMP IOCU detected\n");
-		if ((*(unsigned int *)0xbf403000 & 0x81) != 0x81) {
+		cfg = __raw_readl((u32 *)CKSEG1ADDR(ROCIT_CONFIG_GEN0));
+		if (!(cfg & ROCIT_CONFIG_GEN0_PCI_IOCU)) {
 			pr_crit("IOCU OPERATION DISABLED BY SWITCH - DEFAULTING TO SW IO COHERENCY\n");
 			return 0;
 		}
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 39e7b47..49a2e22 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -14,7 +14,6 @@
 #include <linux/errno.h>
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
-#include <linux/kconfig.h>
 #include <linux/moduleloader.h>
 #include <linux/netdevice.h>
 #include <linux/string.h>
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
index 769d5ed..b10ba12 100644
--- a/arch/mn10300/include/asm/processor.h
+++ b/arch/mn10300/include/asm/processor.h
@@ -18,7 +18,6 @@
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/cpu-regs.h>
-#include <asm/uaccess.h>
 #include <asm/current.h>
 
 /* Forward declaration, a strange C thing */
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 20f7bf6..2eedf6f 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -38,7 +38,6 @@
 #define get_ds()	(KERNEL_DS)
 #define get_fs()	(current_thread_info()->addr_limit)
 #define set_fs(x)	(current_thread_info()->addr_limit = (x))
-#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
 
 #define segment_eq(a, b) ((a).seg == (b).seg)
 
@@ -72,12 +71,6 @@ static inline int ___range_ok(unsigned long addr, unsigned int size)
 #define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
 #define __access_ok(addr, size)     (__range_ok((addr), (size)) == 0)
 
-static inline int verify_area(int type, const void *addr, unsigned long size)
-{
-	return access_ok(type, addr, size) ? 0 : -EFAULT;
-}
-
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
@@ -166,6 +159,7 @@ struct __large_struct { unsigned long buf[100]; };
 		"2:\n"						\
 		"	.section	.fixup,\"ax\"\n"	\
 		"3:\n\t"					\
+		"	mov		0,%1\n"			\
 		"	mov		%3,%0\n"		\
 		"	jmp		2b\n"			\
 		"	.previous\n"				\
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index dfd0301..cd8cb1d 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -75,7 +75,7 @@ static int restore_sigcontext(struct pt_regs *regs,
 		struct fpucontext *buf;
 		err |= __get_user(buf, &sc->fpucontext);
 		if (buf) {
-			if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
 				goto badframe;
 			err |= fpu_restore_sigcontext(buf);
 		}
@@ -98,7 +98,7 @@ asmlinkage long sys_sigreturn(void)
 	long d0;
 
 	frame = (struct sigframe __user *) current_frame()->sp;
-	if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__get_user(set.sig[0], &frame->sc.oldmask))
 		goto badframe;
@@ -130,7 +130,7 @@ asmlinkage long sys_rt_sigreturn(void)
 	long d0;
 
 	frame = (struct rt_sigframe __user *) current_frame()->sp;
-	if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 13c4814..2d5f1c3 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -30,6 +30,7 @@ SECTIONS
 	HEAD_TEXT
 	TEXT_TEXT
 	SCHED_TEXT
+	CPUIDLE_TEXT
 	LOCK_TEXT
 	KPROBES_TEXT
 	*(.fixup)
diff --git a/arch/mn10300/lib/usercopy.c b/arch/mn10300/lib/usercopy.c
index 7826e6c..ce8899e 100644
--- a/arch/mn10300/lib/usercopy.c
+++ b/arch/mn10300/lib/usercopy.c
@@ -9,7 +9,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the Licence, or (at your option) any later version.
  */
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 unsigned long
 __generic_copy_to_user(void *to, const void *from, unsigned long n)
@@ -24,6 +24,8 @@ __generic_copy_from_user(void *to, const void *from, unsigned long n)
 {
 	if (access_ok(VERIFY_READ, from, n))
 		__copy_user_zeroing(to, from, n);
+	else
+		memset(to, 0, n);
 	return n;
 }
 
diff --git a/arch/nios2/boot/dts/10m50_devboard.dts b/arch/nios2/boot/dts/10m50_devboard.dts
index 3e411c6..f362b22 100755
--- a/arch/nios2/boot/dts/10m50_devboard.dts
+++ b/arch/nios2/boot/dts/10m50_devboard.dts
@@ -83,6 +83,7 @@
 			fifo-size = <32>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
+			tx-threshold = <16>;
 		};
 
 		sysid: sysid@18001528 {
diff --git a/arch/nios2/include/asm/cpuinfo.h b/arch/nios2/include/asm/cpuinfo.h
index e88fcae..348bb22 100644
--- a/arch/nios2/include/asm/cpuinfo.h
+++ b/arch/nios2/include/asm/cpuinfo.h
@@ -25,10 +25,10 @@ struct cpuinfo {
 	/* Core CPU configuration */
 	char cpu_impl[12];
 	u32 cpu_clock_freq;
-	u32 mmu;
-	u32 has_div;
-	u32 has_mul;
-	u32 has_mulx;
+	bool mmu;
+	bool has_div;
+	bool has_mul;
+	bool has_mulx;
 
 	/* CPU caches */
 	u32 icache_line_size;
diff --git a/arch/nios2/include/asm/uaccess.h b/arch/nios2/include/asm/uaccess.h
index caa51ff..0ab8232 100644
--- a/arch/nios2/include/asm/uaccess.h
+++ b/arch/nios2/include/asm/uaccess.h
@@ -102,9 +102,12 @@ extern long __copy_to_user(void __user *to, const void *from, unsigned long n);
 static inline long copy_from_user(void *to, const void __user *from,
 				unsigned long n)
 {
-	if (!access_ok(VERIFY_READ, from, n))
-		return n;
-	return __copy_from_user(to, from, n);
+	unsigned long res = n;
+	if (access_ok(VERIFY_READ, from, n))
+		res = __copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 static inline long copy_to_user(void __user *to, const void *from,
@@ -139,7 +142,7 @@ extern long strnlen_user(const char __user *s, long n);
 
 #define __get_user_unknown(val, size, ptr, err) do {			\
 	err = 0;							\
-	if (copy_from_user(&(val), ptr, size)) {			\
+	if (__copy_from_user(&(val), ptr, size)) {			\
 		err = -EFAULT;						\
 	}								\
 	} while (0)
@@ -166,7 +169,7 @@ do {									\
 	({								\
 	long __gu_err = -EFAULT;					\
 	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);		\
-	unsigned long __gu_val;						\
+	unsigned long __gu_val = 0;					\
 	__get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
 	(x) = (__force __typeof__(x))__gu_val;				\
 	__gu_err;							\
diff --git a/arch/nios2/kernel/cpuinfo.c b/arch/nios2/kernel/cpuinfo.c
index 1d96de0..1cccc36 100644
--- a/arch/nios2/kernel/cpuinfo.c
+++ b/arch/nios2/kernel/cpuinfo.c
@@ -41,11 +41,6 @@ static inline u32 fcpu(struct device_node *cpu, const char *n)
 	return val;
 }
 
-static inline u32 fcpu_has(struct device_node *cpu, const char *n)
-{
-	return of_get_property(cpu, n, NULL) ? 1 : 0;
-}
-
 void __init setup_cpuinfo(void)
 {
 	struct device_node *cpu;
@@ -56,7 +51,7 @@ void __init setup_cpuinfo(void)
 	if (!cpu)
 		panic("%s: No CPU found in devicetree!\n", __func__);
 
-	if (!fcpu_has(cpu, "altr,has-initda"))
+	if (!of_property_read_bool(cpu, "altr,has-initda"))
 		panic("initda instruction is unimplemented. Please update your "
 			"hardware system to have more than 4-byte line data "
 			"cache\n");
@@ -69,10 +64,10 @@ void __init setup_cpuinfo(void)
 	else
 		strcpy(cpuinfo.cpu_impl, "<unknown>");
 
-	cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
-	cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
-	cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
-	cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
+	cpuinfo.has_div = of_property_read_bool(cpu, "altr,has-div");
+	cpuinfo.has_mul = of_property_read_bool(cpu, "altr,has-mul");
+	cpuinfo.has_mulx = of_property_read_bool(cpu, "altr,has-mulx");
+	cpuinfo.mmu = of_property_read_bool(cpu, "altr,has-mmu");
 
 	if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
 		err_cpu("DIV");
diff --git a/arch/nios2/kernel/vmlinux.lds.S b/arch/nios2/kernel/vmlinux.lds.S
index e23e895..6a8045b 100644
--- a/arch/nios2/kernel/vmlinux.lds.S
+++ b/arch/nios2/kernel/vmlinux.lds.S
@@ -37,6 +37,7 @@ SECTIONS
 	.text : {
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		IRQENTRY_TEXT
 		SOFTIRQENTRY_TEXT
diff --git a/arch/openrisc/include/asm/uaccess.h b/arch/openrisc/include/asm/uaccess.h
index a6bd07c..140faa1 100644
--- a/arch/openrisc/include/asm/uaccess.h
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -82,10 +82,6 @@ struct exception_table_entry {
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-extern void sort_exception_table(void);
-
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -273,28 +269,20 @@ __copy_tofrom_user(void *to, const void *from, unsigned long size);
 static inline unsigned long
 copy_from_user(void *to, const void *from, unsigned long n)
 {
-	unsigned long over;
-
-	if (access_ok(VERIFY_READ, from, n))
-		return __copy_tofrom_user(to, from, n);
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + n - TASK_SIZE;
-		return __copy_tofrom_user(to, from, n - over) + over;
-	}
-	return n;
+	unsigned long res = n;
+
+	if (likely(access_ok(VERIFY_READ, from, n)))
+		res = __copy_tofrom_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
 static inline unsigned long
 copy_to_user(void *to, const void *from, unsigned long n)
 {
-	unsigned long over;
-
-	if (access_ok(VERIFY_WRITE, to, n))
-		return __copy_tofrom_user(to, from, n);
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + n - TASK_SIZE;
-		return __copy_tofrom_user(to, from, n - over) + over;
-	}
+	if (likely(access_ok(VERIFY_WRITE, to, n)))
+		n = __copy_tofrom_user(to, from, n);
 	return n;
 }
 
@@ -303,13 +291,8 @@ extern unsigned long __clear_user(void *addr, unsigned long size);
 static inline __must_check unsigned long
 clear_user(void *addr, unsigned long size)
 {
-
-	if (access_ok(VERIFY_WRITE, addr, size))
-		return __clear_user(addr, size);
-	if ((unsigned long)addr < TASK_SIZE) {
-		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-		return __clear_user(addr, size - over) + over;
-	}
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		size = __clear_user(addr, size);
 	return size;
 }
 
diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S
index d936de4..d68b9ed 100644
--- a/arch/openrisc/kernel/vmlinux.lds.S
+++ b/arch/openrisc/kernel/vmlinux.lds.S
@@ -47,6 +47,7 @@ SECTIONS
           _stext = .;
 	  TEXT_TEXT
 	  SCHED_TEXT
+	  CPUIDLE_TEXT
 	  LOCK_TEXT
 	  KPROBES_TEXT
 	  IRQENTRY_TEXT
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index af12c2d..71c4a3a 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -10,12 +10,12 @@ config PARISC
 	select RTC_CLASS
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
+	select HAVE_MEMBLOCK
+	select NO_BOOTMEM
 	select BUG
 	select BUILDTIME_EXTABLE_SORT
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
@@ -24,6 +24,7 @@ config PARISC
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_ARCH_HARDENED_USERCOPY
 	select VIRT_TO_BUS
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
diff --git a/arch/parisc/include/asm/dwarf.h b/arch/parisc/include/asm/dwarf.h
new file mode 100644
index 0000000..8fe7d6b
--- /dev/null
+++ b/arch/parisc/include/asm/dwarf.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2016 Helge Deller <deller@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_PARISC_DWARF_H
+#define _ASM_PARISC_DWARF_H
+
+#ifdef __ASSEMBLY__
+
+#define CFI_STARTPROC	.cfi_startproc
+#define CFI_ENDPROC	.cfi_endproc
+#define CFI_DEF_CFA	.cfi_def_cfa
+#define CFI_REGISTER	.cfi_register
+#define CFI_REL_OFFSET	.cfi_rel_offset
+#define CFI_UNDEFINED	.cfi_undefined
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_PARISC_DWARF_H */
diff --git a/arch/parisc/include/asm/linkage.h b/arch/parisc/include/asm/linkage.h
index 0b19a72..67e6b43 100644
--- a/arch/parisc/include/asm/linkage.h
+++ b/arch/parisc/include/asm/linkage.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_PARISC_LINKAGE_H
 #define __ASM_PARISC_LINKAGE_H
 
+#include <asm/dwarf.h>
+
 #ifndef __ALIGN
 #define __ALIGN         .align 4
 #define __ALIGN_STR     ".align 4"
@@ -10,6 +12,8 @@
  * In parisc assembly a semicolon marks a comment while a
  * exclamation mark is used to separate independent lines.
  */
+#define ASM_NL	!
+
 #ifdef __ASSEMBLY__
 
 #define ENTRY(name) \
@@ -26,6 +30,14 @@ name:
 	END(name)
 #endif
 
+#define ENTRY_CFI(name) \
+	ENTRY(name)	ASM_NL\
+	CFI_STARTPROC
+
+#define ENDPROC_CFI(name) \
+	ENDPROC(name)	ASM_NL\
+	CFI_ENDPROC
+
 #endif /* __ASSEMBLY__ */
 
 #endif  /* __ASM_PARISC_LINKAGE_H */
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 291cee2..c2c43f7 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -83,10 +83,10 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
 
 /* This is the size of the initially mapped kernel memory */
-#ifdef CONFIG_64BIT
-#define KERNEL_INITIAL_ORDER	25	/* 1<<25 = 32MB */
+#if defined(CONFIG_64BIT)
+#define KERNEL_INITIAL_ORDER	26	/* 1<<26 = 64MB */
 #else
-#define KERNEL_INITIAL_ORDER	24	/* 1<<24 = 16MB */
+#define KERNEL_INITIAL_ORDER	25	/* 1<<25 = 32MB */
 #endif
 #define KERNEL_INITIAL_SIZE	(1 << KERNEL_INITIAL_ORDER)
 
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 5e953ab..6367023 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -11,6 +11,7 @@ void parisc_terminate(char *msg, struct pt_regs *regs,
 void die_if_kernel(char *str, struct pt_regs *regs, long err);
 
 /* mm/fault.c */
+const char *trap_name(unsigned long code);
 void do_page_fault(struct pt_regs *regs, unsigned long code,
 		unsigned long address);
 #endif
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index e915048..9a2aee1 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -10,6 +10,8 @@
 #include <asm-generic/uaccess-unaligned.h>
 
 #include <linux/bug.h>
+#include <linux/string.h>
+#include <linux/thread_info.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -200,10 +202,12 @@ extern long lstrnlen_user(const char __user *, long);
 #define clear_user lclear_user
 #define __clear_user lclear_user
 
-unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len);
-#define __copy_to_user copy_to_user
-unsigned long __copy_from_user(void *dst, const void __user *src, unsigned long len);
-unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len);
+unsigned long __must_check __copy_to_user(void __user *dst, const void *src,
+					  unsigned long len);
+unsigned long __must_check __copy_from_user(void *dst, const void __user *src,
+					  unsigned long len);
+unsigned long copy_in_user(void __user *dst, const void __user *src,
+			   unsigned long len);
 #define __copy_in_user copy_in_user
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
@@ -216,21 +220,40 @@ static inline void copy_user_overflow(int size, unsigned long count)
 	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
 }
 
-static inline unsigned long __must_check copy_from_user(void *to,
-                                          const void __user *from,
-                                          unsigned long n)
+static __always_inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-        int sz = __compiletime_object_size(to);
-        int ret = -EFAULT;
+	int sz = __compiletime_object_size(to);
+	unsigned long ret = n;
 
-        if (likely(sz == -1 || sz >= n))
-                ret = __copy_from_user(to, from, n);
-        else if (!__builtin_constant_p(n))
+	if (likely(sz < 0 || sz >= n)) {
+		check_object_size(to, n, false);
+		ret = __copy_from_user(to, from, n);
+	} else if (!__builtin_constant_p(n))
 		copy_user_overflow(sz, n);
 	else
-                __bad_copy_user();
+		__bad_copy_user();
 
-        return ret;
+	if (unlikely(ret))
+		memset(to + (n - ret), 0, ret);
+
+	return ret;
+}
+
+static __always_inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	int sz = __compiletime_object_size(from);
+
+	if (likely(sz < 0 || sz >= n)) {
+		check_object_size(from, n, true);
+		n = __copy_to_user(to, from, n);
+	} else if (!__builtin_constant_p(n))
+		copy_user_overflow(sz, n);
+	else
+		__bad_copy_user();
+
+	return n;
 }
 
 struct pt_regs;
diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h
index f3db7d8..5979745 100644
--- a/arch/parisc/include/uapi/asm/mman.h
+++ b/arch/parisc/include/uapi/asm/mman.h
@@ -75,4 +75,9 @@
 #define MAP_HUGE_SHIFT	26
 #define MAP_HUGE_MASK	0x3f
 
+#define PKEY_DISABLE_ACCESS	0x1
+#define PKEY_DISABLE_WRITE	0x2
+#define PKEY_ACCESS_MASK	(PKEY_DISABLE_ACCESS |\
+				 PKEY_DISABLE_WRITE)
+
 #endif /* __PARISC_MMAN_H__ */
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 6700127..629eb46 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -345,7 +345,7 @@ void flush_dcache_page(struct page *page)
 				      != (addr & (SHM_COLOUR - 1))) {
 			__flush_cache_page(mpnt, addr, page_to_phys(page));
 			if (old_addr)
-				printk(KERN_ERR "INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %s\n", old_addr, addr, mpnt->vm_file ? (char *)mpnt->vm_file->f_path.dentry->d_name.name : "(null)");
+				printk(KERN_ERR "INEQUIVALENT ALIASES 0x%lx and 0x%lx in file %pD\n", old_addr, addr, mpnt->vm_file);
 			old_addr = addr;
 		}
 	}
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index baa3d9d..4fcff2d 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -766,7 +766,7 @@ ENTRY(end_fault_vector)
 	 * copy_thread moved args into task save area.
 	 */
 
-ENTRY(ret_from_kernel_thread)
+ENTRY_CFI(ret_from_kernel_thread)
 
 	/* Call schedule_tail first though */
 	BL	schedule_tail, %r2
@@ -782,7 +782,7 @@ ENTRY(ret_from_kernel_thread)
 	copy	%r31, %r2
 	b	finish_child_return
 	nop
-ENDPROC(ret_from_kernel_thread)
+ENDPROC_CFI(ret_from_kernel_thread)
 
 
 	/*
@@ -790,7 +790,7 @@ ENDPROC(ret_from_kernel_thread)
 	 *	struct task_struct *next)
 	 *
 	 * switch kernel stacks and return prev */
-ENTRY(_switch_to)
+ENTRY_CFI(_switch_to)
 	STREG	 %r2, -RP_OFFSET(%r30)
 
 	callee_save_float
@@ -815,7 +815,7 @@ _switch_to_ret:
 	LDREG	-RP_OFFSET(%r30), %r2
 	bv	%r0(%r2)
 	copy	%r26, %r28
-ENDPROC(_switch_to)
+ENDPROC_CFI(_switch_to)
 
 	/*
 	 * Common rfi return path for interruptions, kernel execve, and
@@ -833,7 +833,7 @@ ENDPROC(_switch_to)
 
 	.align	PAGE_SIZE
 
-ENTRY(syscall_exit_rfi)
+ENTRY_CFI(syscall_exit_rfi)
 	mfctl   %cr30,%r16
 	LDREG	TI_TASK(%r16), %r16	/* thread_info -> task_struct */
 	ldo	TASK_REGS(%r16),%r16
@@ -1037,12 +1037,12 @@ intr_extint:
 
 	b	do_cpu_irq_mask
 	ldo	R%intr_return(%r2), %r2	/* return to intr_return, not here */
-ENDPROC(syscall_exit_rfi)
+ENDPROC_CFI(syscall_exit_rfi)
 
 
 	/* Generic interruptions (illegal insn, unaligned, page fault, etc) */
 
-ENTRY(intr_save)		/* for os_hpmc */
+ENTRY_CFI(intr_save)		/* for os_hpmc */
 	mfsp    %sr7,%r16
 	cmpib,COND(=),n 0,%r16,1f
 	get_stack_use_cr30
@@ -1117,7 +1117,7 @@ skip_save_ior:
 
 	b		handle_interruption
 	ldo		R%intr_check_sig(%r2), %r2
-ENDPROC(intr_save)
+ENDPROC_CFI(intr_save)
 
 
 	/*
@@ -1720,7 +1720,7 @@ dtlb_fault:
 	.endm
 
 	.macro	fork_like name
-ENTRY(sys_\name\()_wrapper)
+ENTRY_CFI(sys_\name\()_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30), %r1
 	ldo	TASK_REGS(%r1),%r1
 	reg_save %r1
@@ -1728,7 +1728,7 @@ ENTRY(sys_\name\()_wrapper)
 	ldil	L%sys_\name, %r31
 	be	R%sys_\name(%sr4,%r31)
 	STREG	%r28, PT_CR27(%r1)
-ENDPROC(sys_\name\()_wrapper)
+ENDPROC_CFI(sys_\name\()_wrapper)
 	.endm
 
 fork_like clone
@@ -1736,7 +1736,7 @@ fork_like fork
 fork_like vfork
 
 	/* Set the return value for the child */
-ENTRY(child_return)
+ENTRY_CFI(child_return)
 	BL	schedule_tail, %r2
 	nop
 finish_child_return:
@@ -1748,9 +1748,9 @@ finish_child_return:
 	reg_restore %r1
 	b	syscall_exit
 	copy	%r0,%r28
-ENDPROC(child_return)
+ENDPROC_CFI(child_return)
 
-ENTRY(sys_rt_sigreturn_wrapper)
+ENTRY_CFI(sys_rt_sigreturn_wrapper)
 	LDREG	TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26
 	ldo	TASK_REGS(%r26),%r26	/* get pt regs */
 	/* Don't save regs, we are going to restore them from sigcontext. */
@@ -1778,9 +1778,9 @@ ENTRY(sys_rt_sigreturn_wrapper)
 	 */
 	bv	%r0(%r2)
 	LDREG	PT_GR28(%r1),%r28  /* reload original r28 for syscall_exit */
-ENDPROC(sys_rt_sigreturn_wrapper)
+ENDPROC_CFI(sys_rt_sigreturn_wrapper)
 
-ENTRY(syscall_exit)
+ENTRY_CFI(syscall_exit)
 	/* NOTE: Not all syscalls exit this way.  rt_sigreturn will exit
 	 * via syscall_exit_rfi if the signal was received while the process
 	 * was running.
@@ -1979,7 +1979,7 @@ syscall_do_resched:
 #else
 	nop
 #endif
-ENDPROC(syscall_exit)
+ENDPROC_CFI(syscall_exit)
 
 
 #ifdef CONFIG_FUNCTION_TRACER
@@ -2023,7 +2023,7 @@ ENDPROC(mcount)
 	.align 8
 	.globl return_to_handler
 	.type  return_to_handler, @function
-ENTRY(return_to_handler)
+ENTRY_CFI(return_to_handler)
 	.proc
 	.callinfo caller,frame=FRAME_SIZE
 	.entry
@@ -2067,7 +2067,7 @@ parisc_return_to_handler:
 	LDREGM -FRAME_SIZE(%sp),%r3
 	.exit
 	.procend
-ENDPROC(return_to_handler)
+ENDPROC_CFI(return_to_handler)
 
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
@@ -2076,7 +2076,7 @@ ENDPROC(return_to_handler)
 #ifdef CONFIG_IRQSTACKS
 /* void call_on_stack(unsigned long param1, void *func,
 		      unsigned long new_stack) */
-ENTRY(call_on_stack)
+ENTRY_CFI(call_on_stack)
 	copy	%sp, %r1
 
 	/* Regarding the HPPA calling conventions for function pointers,
@@ -2112,10 +2112,10 @@ ENTRY(call_on_stack)
 	bv	(%rp)
 	LDREG	-68(%sp), %sp
 # endif /* CONFIG_64BIT */
-ENDPROC(call_on_stack)
+ENDPROC_CFI(call_on_stack)
 #endif /* CONFIG_IRQSTACKS */
 
-get_register:
+ENTRY_CFI(get_register)
 	/*
 	 * get_register is used by the non access tlb miss handlers to
 	 * copy the value of the general register specified in r8 into
@@ -2192,9 +2192,10 @@ get_register:
 	copy    %r30,%r1
 	bv      %r0(%r25)    /* r31 */
 	copy    %r31,%r1
+ENDPROC_CFI(get_register)
 
 
-set_register:
+ENTRY_CFI(set_register)
 	/*
 	 * set_register is used by the non access tlb miss handlers to
 	 * copy the value of r1 into the general register specified in
@@ -2266,4 +2267,5 @@ set_register:
 	copy    %r1,%r30
 	bv      %r0(%r25)    /* r31 */
 	copy    %r1,%r31
+ENDPROC_CFI(set_register)
 
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index a828a0a..5a5506a 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -48,7 +48,7 @@ static void __hot prepare_ftrace_return(unsigned long *parent,
 		return;
 
         if (ftrace_push_return_trace(old, self_addr, &trace.depth,
-			0 ) == -EBUSY)
+				     0, NULL) == -EBUSY)
                 return;
 
 	/* activate parisc_return_to_handler() as return point */
diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S
index e158b6f..0fbd0a0 100644
--- a/arch/parisc/kernel/hpmc.S
+++ b/arch/parisc/kernel/hpmc.S
@@ -41,12 +41,12 @@
  */
 
 	.level		1.1
-	.data
 
 #include <asm/assembly.h>
 #include <asm/pdc.h>
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 
 	/*
 	 * stack for os_hpmc, the HPMC handler.
@@ -55,22 +55,26 @@
 	 * IODC requires 7K byte stack.  That leaves 1K byte for os_hpmc.
 	 */
 
+	__PAGE_ALIGNED_BSS
 	.align 4096
 hpmc_stack:
 	.block 16384
 
 #define HPMC_IODC_BUF_SIZE 0x8000
 
+	__PAGE_ALIGNED_BSS
 	.align 4096
 hpmc_iodc_buf:
 	.block HPMC_IODC_BUF_SIZE
 
+	.section .bss
 	.align 8
 hpmc_raddr:
 	.block 128
 
 #define HPMC_PIM_DATA_SIZE 896 /* Enough to hold all architected 2.0 state */
 
+	.section .bss
 	.align 8
 ENTRY(hpmc_pim_data)
 	.block HPMC_PIM_DATA_SIZE
@@ -79,7 +83,7 @@ END(hpmc_pim_data)
 	.text
 
 	.import intr_save, code
-ENTRY(os_hpmc)
+ENTRY_CFI(os_hpmc)
 .os_hpmc:
 
 	/*
@@ -295,11 +299,11 @@ os_hpmc_6:
 
 	b .
 	nop
-ENDPROC(os_hpmc)
+ENDPROC_CFI(os_hpmc)
 .os_hpmc_end:
-	nop
-.data
-.align 4
+
+
+	__INITRODATA
 	.export os_hpmc_size
 os_hpmc_size:
 	.word .os_hpmc_end-.os_hpmc
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index f0b6722..545f9d2 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -506,7 +506,7 @@ add_system_map_addresses(struct parisc_device *dev, int num_addrs,
 	long status;
 	struct pdc_system_map_addr_info addr_result;
 
-	dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
+	dev->addr = kmalloc_array(num_addrs, sizeof(*dev->addr), GFP_KERNEL);
 	if(!dev->addr) {
 		printk(KERN_ERR "%s %s(): memory allocation failure\n",
 		       __FILE__, __func__);
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index b743a80..985e06d 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -41,7 +41,7 @@
 	.text
 	.align	128
 
-ENTRY(flush_tlb_all_local)
+ENTRY_CFI(flush_tlb_all_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -190,11 +190,11 @@ fdtdone:
 
 	.exit
 	.procend
-ENDPROC(flush_tlb_all_local)
+ENDPROC_CFI(flush_tlb_all_local)
 
 	.import cache_info,data
 
-ENTRY(flush_instruction_cache_local)
+ENTRY_CFI(flush_instruction_cache_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -257,11 +257,11 @@ fisync:
 	.exit
 
 	.procend
-ENDPROC(flush_instruction_cache_local)
+ENDPROC_CFI(flush_instruction_cache_local)
 
 
 	.import cache_info, data
-ENTRY(flush_data_cache_local)
+ENTRY_CFI(flush_data_cache_local)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -325,7 +325,7 @@ fdsync:
 	.exit
 
 	.procend
-ENDPROC(flush_data_cache_local)
+ENDPROC_CFI(flush_data_cache_local)
 
 	.align	16
 
@@ -356,7 +356,7 @@ ENDPROC(flush_data_cache_local)
 
 /* Clear page using kernel mapping.  */
 
-ENTRY(clear_page_asm)
+ENTRY_CFI(clear_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -422,11 +422,11 @@ ENTRY(clear_page_asm)
 	.exit
 
 	.procend
-ENDPROC(clear_page_asm)
+ENDPROC_CFI(clear_page_asm)
 
 /* Copy page using kernel mapping.  */
 
-ENTRY(copy_page_asm)
+ENTRY_CFI(copy_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -540,7 +540,7 @@ ENTRY(copy_page_asm)
 	.exit
 
 	.procend
-ENDPROC(copy_page_asm)
+ENDPROC_CFI(copy_page_asm)
 
 /*
  * NOTE: Code in clear_user_page has a hard coded dependency on the
@@ -573,11 +573,17 @@ ENDPROC(copy_page_asm)
 	.endm
 
 	/*
-	 * We can't do this since copy_user_page is used to bring in
-	 * file data that might have instructions. Since the data would
-	 * then need to be flushed out so the i-fetch can see it, it
-	 * makes more sense to just copy through the kernel translation
-	 * and flush it.
+	 * copy_user_page_asm() performs a page copy using mappings
+	 * equivalent to the user page mappings.  It can be used to
+	 * implement copy_user_page() but unfortunately both the `from'
+	 * and `to' pages need to be flushed through mappings equivalent
+	 * to the user mappings after the copy because the kernel accesses
+	 * the `from' page through the kmap kernel mapping and the `to'
+	 * page needs to be flushed since code can be copied.  As a
+	 * result, this implementation is less efficient than the simpler
+	 * copy using the kernel mapping.  It only needs the `from' page
+	 * to flushed via the user mapping.  The kunmap routines handle
+	 * the flushes needed for the kernel mapping.
 	 *
 	 * I'm still keeping this around because it may be possible to
 	 * use it if more information is passed into copy_user_page().
@@ -586,7 +592,7 @@ ENDPROC(copy_page_asm)
 	 *
 	 */
 
-ENTRY(copy_user_page_asm)
+ENTRY_CFI(copy_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -742,9 +748,9 @@ ENTRY(copy_user_page_asm)
 	.exit
 
 	.procend
-ENDPROC(copy_user_page_asm)
+ENDPROC_CFI(copy_user_page_asm)
 
-ENTRY(clear_user_page_asm)
+ENTRY_CFI(clear_user_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -828,9 +834,9 @@ ENTRY(clear_user_page_asm)
 	.exit
 
 	.procend
-ENDPROC(clear_user_page_asm)
+ENDPROC_CFI(clear_user_page_asm)
 
-ENTRY(flush_dcache_page_asm)
+ENTRY_CFI(flush_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -904,9 +910,9 @@ ENTRY(flush_dcache_page_asm)
 	.exit
 
 	.procend
-ENDPROC(flush_dcache_page_asm)
+ENDPROC_CFI(flush_dcache_page_asm)
 
-ENTRY(flush_icache_page_asm)
+ENTRY_CFI(flush_icache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -982,9 +988,9 @@ ENTRY(flush_icache_page_asm)
 	.exit
 
 	.procend
-ENDPROC(flush_icache_page_asm)
+ENDPROC_CFI(flush_icache_page_asm)
 
-ENTRY(flush_kernel_dcache_page_asm)
+ENTRY_CFI(flush_kernel_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1025,9 +1031,9 @@ ENTRY(flush_kernel_dcache_page_asm)
 	.exit
 
 	.procend
-ENDPROC(flush_kernel_dcache_page_asm)
+ENDPROC_CFI(flush_kernel_dcache_page_asm)
 
-ENTRY(purge_kernel_dcache_page_asm)
+ENTRY_CFI(purge_kernel_dcache_page_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1067,9 +1073,9 @@ ENTRY(purge_kernel_dcache_page_asm)
 	.exit
 
 	.procend
-ENDPROC(purge_kernel_dcache_page_asm)
+ENDPROC_CFI(purge_kernel_dcache_page_asm)
 
-ENTRY(flush_user_dcache_range_asm)
+ENTRY_CFI(flush_user_dcache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1088,9 +1094,9 @@ ENTRY(flush_user_dcache_range_asm)
 	.exit
 
 	.procend
-ENDPROC(flush_user_dcache_range_asm)
+ENDPROC_CFI(flush_user_dcache_range_asm)
 
-ENTRY(flush_kernel_dcache_range_asm)
+ENTRY_CFI(flush_kernel_dcache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1110,9 +1116,9 @@ ENTRY(flush_kernel_dcache_range_asm)
 	.exit
 
 	.procend
-ENDPROC(flush_kernel_dcache_range_asm)
+ENDPROC_CFI(flush_kernel_dcache_range_asm)
 
-ENTRY(flush_user_icache_range_asm)
+ENTRY_CFI(flush_user_icache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1131,9 +1137,9 @@ ENTRY(flush_user_icache_range_asm)
 	.exit
 
 	.procend
-ENDPROC(flush_user_icache_range_asm)
+ENDPROC_CFI(flush_user_icache_range_asm)
 
-ENTRY(flush_kernel_icache_page)
+ENTRY_CFI(flush_kernel_icache_page)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1174,9 +1180,9 @@ ENTRY(flush_kernel_icache_page)
 	.exit
 
 	.procend
-ENDPROC(flush_kernel_icache_page)
+ENDPROC_CFI(flush_kernel_icache_page)
 
-ENTRY(flush_kernel_icache_range_asm)
+ENTRY_CFI(flush_kernel_icache_range_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1194,13 +1200,13 @@ ENTRY(flush_kernel_icache_range_asm)
 	nop
 	.exit
 	.procend
-ENDPROC(flush_kernel_icache_range_asm)
+ENDPROC_CFI(flush_kernel_icache_range_asm)
 
 	/* align should cover use of rfi in disable_sr_hashing_asm and
 	 * srdis_done.
 	 */
 	.align	256
-ENTRY(disable_sr_hashing_asm)
+ENTRY_CFI(disable_sr_hashing_asm)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -1289,6 +1295,6 @@ srdis_done:
 	.exit
 
 	.procend
-ENDPROC(disable_sr_hashing_asm)
+ENDPROC_CFI(disable_sr_hashing_asm)
 
 	.end
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 5f3d3a1..1db58e5 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -61,7 +61,7 @@ save_cr_end:
 	 *	iodc_fn is the IODC function to call
 	 */
 
-ENTRY(real32_call_asm)
+ENTRY_CFI(real32_call_asm)
 	STREG	%rp, -RP_OFFSET(%sp)	/* save RP */
 #ifdef CONFIG_64BIT
 	callee_save
@@ -119,14 +119,14 @@ ric_ret:
 	LDREG	-RP_OFFSET(%sp), %rp	/* restore RP */
 	bv	0(%rp)
 	nop
-ENDPROC(real32_call_asm)
+ENDPROC_CFI(real32_call_asm)
 
 
 #  define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where)
 #  define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r
 
 	.text
-save_control_regs:
+ENTRY_CFI(save_control_regs)
 	load32	PA(save_cr_space), %r28
 	PUSH_CR(%cr24, %r28)
 	PUSH_CR(%cr25, %r28)
@@ -139,8 +139,9 @@ save_control_regs:
 	PUSH_CR(%cr15, %r28)
 	bv 0(%r2)
 	nop
+ENDPROC_CFI(save_control_regs)
 
-restore_control_regs:
+ENTRY_CFI(restore_control_regs)
 	load32	PA(save_cr_end), %r26
 	POP_CR(%cr15, %r26)
 	POP_CR(%cr31, %r26)
@@ -153,13 +154,14 @@ restore_control_regs:
 	POP_CR(%cr24, %r26)
 	bv 0(%r2)
 	nop
+ENDPROC_CFI(restore_control_regs)
 
 /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
  * more general-purpose use by the several places which need RFIs
  */
 	.text
 	.align 128
-rfi_virt2real:
+ENTRY_CFI(rfi_virt2real)
 	/* switch to real mode... */
 	rsm		PSW_SM_I,%r0
 	load32		PA(rfi_v2r_1), %r1
@@ -191,10 +193,11 @@ rfi_v2r_1:
 	tophys_r1 %r2
 	bv	0(%r2)
 	nop
+ENDPROC_CFI(rfi_virt2real)
 
 	.text
 	.align 128
-rfi_real2virt:
+ENTRY_CFI(rfi_real2virt)
 	rsm		PSW_SM_I,%r0
 	load32		(rfi_r2v_1), %r1
 	nop
@@ -225,6 +228,7 @@ rfi_r2v_1:
 	tovirt_r1 %r2
 	bv	0(%r2)
 	nop
+ENDPROC_CFI(rfi_real2virt)
 
 #ifdef CONFIG_64BIT
 
@@ -238,7 +242,7 @@ rfi_r2v_1:
 	 *	arg0p points to where saved arg values may be found
 	 *	iodc_fn is the IODC function to call
 	 */
-ENTRY(real64_call_asm)
+ENTRY_CFI(real64_call_asm)
 	std	%rp, -0x10(%sp)		/* save RP */
 	std	%sp, -8(%arg0)		/* save SP on real-mode stack */
 	copy	%arg0, %sp		/* adopt the real-mode SP */
@@ -284,7 +288,7 @@ r64_ret:
 	ldd	-0x10(%sp), %rp		/* restore RP */
 	bv	0(%rp)
 	nop
-ENDPROC(real64_call_asm)
+ENDPROC_CFI(real64_call_asm)
 
 #endif
 
@@ -293,12 +297,12 @@ ENDPROC(real64_call_asm)
 	**	GCC 3.3 and later has a new function in libgcc.a for
 	**	comparing function pointers.
 	*/
-ENTRY(__canonicalize_funcptr_for_compare)
+ENTRY_CFI(__canonicalize_funcptr_for_compare)
 #ifdef CONFIG_64BIT
 	bve (%r2)
 #else
 	bv %r0(%r2)
 #endif
 	copy %r26,%r28
-ENDPROC(__canonicalize_funcptr_for_compare)
+ENDPROC_CFI(__canonicalize_funcptr_for_compare)
 
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index f7ea626..81d6f63 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -38,6 +38,7 @@
 #include <linux/export.h>
 
 #include <asm/processor.h>
+#include <asm/sections.h>
 #include <asm/pdc.h>
 #include <asm/led.h>
 #include <asm/machdep.h>	/* for pa7300lc_init() proto */
@@ -140,6 +141,13 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	printk(KERN_CONT ".\n");
 
+	/*
+	 * Check if initial kernel page mappings are sufficient.
+	 * panic early if not, else we may access kernel functions
+	 * and variables which can't be reached.
+	 */
+	if (__pa((unsigned long) &_end) >= KERNEL_INITIAL_SIZE)
+		panic("KERNEL_INITIAL_ORDER too small!");
 
 	pdc_console_init();
 
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index c2a9cc5..75dab28 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -412,8 +412,8 @@ void smp_cpus_done(unsigned int cpu_max)
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
-	if (cpu != 0 && cpu < parisc_max_cpus)
-		smp_boot_one_cpu(cpu, tidle);
+	if (cpu != 0 && cpu < parisc_max_cpus && smp_boot_one_cpu(cpu, tidle))
+		return -ENOSYS;
 
 	return cpu_online(cpu) ? 0 : -ENOSYS;
 }
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 4b0b963..9b63b87 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -226,12 +226,6 @@ void __init start_cpu_itimer(void)
 	unsigned int cpu = smp_processor_id();
 	unsigned long next_tick = mfctl(16) + clocktick;
 
-#if defined(CONFIG_HAVE_UNSTABLE_SCHED_CLOCK) && defined(CONFIG_64BIT)
-	/* With multiple 64bit CPUs online, the cr16's are not syncronized. */
-	if (cpu != 0)
-		clear_sched_clock_stable();
-#endif
-
 	mtctl(next_tick, 16);		/* kick off Interval Timer (CR16) */
 
 	per_cpu(cpu_data, cpu).it_value = next_tick;
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 97d6b20..378df92 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -458,8 +458,8 @@ void parisc_terminate(char *msg, struct pt_regs *regs, int code, unsigned long o
 	}
 
 	printk("\n");
-	printk(KERN_CRIT "%s: Code=%d regs=%p (Addr=" RFMT ")\n",
-			msg, code, regs, offset);
+	pr_crit("%s: Code=%d (%s) regs=%p (Addr=" RFMT ")\n",
+		msg, code, trap_name(code), regs, offset);
 	show_regs(regs);
 
 	spin_unlock(&terminate_lock);
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index f3ead0b..3d6ef1b 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -69,6 +69,7 @@ SECTIONS
 	.text ALIGN(PAGE_SIZE) : {
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
@@ -89,8 +90,9 @@ SECTIONS
 	/* Start of data section */
 	_sdata = .;
 
-	RO_DATA_SECTION(8)
-
+	/* Architecturally we need to keep __gp below 0x1000000 and thus
+	 * in front of RO_DATA_SECTION() which stores lots of tracepoint
+	 * and ftrace symbols. */
 #ifdef CONFIG_64BIT
 	. = ALIGN(16);
 	/* Linkage tables */
@@ -105,6 +107,12 @@ SECTIONS
 	}
 #endif
 
+	RO_DATA_SECTION(8)
+
+	/* RO because of BUILDTIME_EXTABLE_SORT */
+	EXCEPTION_TABLE(8)
+	NOTES
+
 	/* unwind info */
 	.PARISC.unwind : {
 		__start___unwind = .;
@@ -120,9 +128,6 @@ SECTIONS
 	. = ALIGN(HUGEPAGE_SIZE);
 	data_start = .;
 
-	EXCEPTION_TABLE(8)
-	NOTES
-
 	/* Data */
 	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, PAGE_SIZE)
 
@@ -138,8 +143,6 @@ SECTIONS
 	/* BSS */
 	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE)
 
-	/* bootmap is allocated in setup_bootmem() directly behind bss. */
-
 	. = ALIGN(HUGEPAGE_SIZE);
 	_end = . ;
 
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1052b74..a5b72f2 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -65,34 +65,34 @@
 	.section .fixup, "ax"
 
 	/* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-ENTRY(fixup_get_user_skip_1)
+ENTRY_CFI(fixup_get_user_skip_1)
 	get_fault_ip %r1,%r8
 	ldo 4(%r1), %r1
 	ldi -EFAULT, %r8
 	bv %r0(%r1)
 	copy %r0, %r9
-ENDPROC(fixup_get_user_skip_1)
+ENDPROC_CFI(fixup_get_user_skip_1)
 
-ENTRY(fixup_get_user_skip_2)
+ENTRY_CFI(fixup_get_user_skip_2)
 	get_fault_ip %r1,%r8
 	ldo 8(%r1), %r1
 	ldi -EFAULT, %r8
 	bv %r0(%r1)
 	copy %r0, %r9
-ENDPROC(fixup_get_user_skip_2)
+ENDPROC_CFI(fixup_get_user_skip_2)
 
 	/* put_user() fixups, store -EFAULT in r8 */
-ENTRY(fixup_put_user_skip_1)
+ENTRY_CFI(fixup_put_user_skip_1)
 	get_fault_ip %r1,%r8
 	ldo 4(%r1), %r1
 	bv %r0(%r1)
 	ldi -EFAULT, %r8
-ENDPROC(fixup_put_user_skip_1)
+ENDPROC_CFI(fixup_put_user_skip_1)
 
-ENTRY(fixup_put_user_skip_2)
+ENTRY_CFI(fixup_put_user_skip_2)
 	get_fault_ip %r1,%r8
 	ldo 8(%r1), %r1
 	bv %r0(%r1)
 	ldi -EFAULT, %r8
-ENDPROC(fixup_put_user_skip_2)
+ENDPROC_CFI(fixup_put_user_skip_2)
 
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index a512f07..56845de 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -67,7 +67,7 @@
 	 * otherwise, returns number of bytes not transferred.
 	 */
 
-ENTRY(lclear_user)
+ENTRY_CFI(lclear_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -81,7 +81,7 @@ $lclu_done:
 	bv          %r0(%r2)
 	copy        %r25,%r28
 	.exit
-ENDPROC(lclear_user)
+ENDPROC_CFI(lclear_user)
 
 	.section .fixup,"ax"
 2:      fixup_branch $lclu_done
@@ -100,7 +100,7 @@ ENDPROC(lclear_user)
 	 *         else strlen + 1 (i.e. includes zero byte).
 	 */
 
-ENTRY(lstrnlen_user)
+ENTRY_CFI(lstrnlen_user)
 	.proc
 	.callinfo NO_CALLS
 	.entry
@@ -120,7 +120,7 @@ $lslen_done:
 $lslen_nzero:
 	b           $lslen_done
 	ldo         1(%r26),%r26 /* special case for N == 0 */
-ENDPROC(lstrnlen_user)
+ENDPROC_CFI(lstrnlen_user)
 
 	.section .fixup,"ax"
 3:      fixup_branch $lslen_done
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index b2b441b..f82ff10 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -489,20 +489,23 @@ static unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
 }
 
 #ifdef __KERNEL__
-unsigned long copy_to_user(void __user *dst, const void *src, unsigned long len)
+unsigned long __copy_to_user(void __user *dst, const void *src,
+			     unsigned long len)
 {
 	mtsp(get_kernel_space(), 1);
 	mtsp(get_user_space(), 2);
 	return pa_memcpy((void __force *)dst, src, len);
 }
+EXPORT_SYMBOL(__copy_to_user);
 
-EXPORT_SYMBOL(__copy_from_user);
-unsigned long __copy_from_user(void *dst, const void __user *src, unsigned long len)
+unsigned long __copy_from_user(void *dst, const void __user *src,
+			       unsigned long len)
 {
 	mtsp(get_user_space(), 1);
 	mtsp(get_kernel_space(), 2);
 	return pa_memcpy(dst, (void __force *)src, len);
 }
+EXPORT_SYMBOL(__copy_from_user);
 
 unsigned long copy_in_user(void __user *dst, const void __user *src, unsigned long len)
 {
@@ -520,8 +523,6 @@ void * memcpy(void * dst,const void *src, size_t count)
 	return dst;
 }
 
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(copy_from_user);
 EXPORT_SYMBOL(copy_in_user);
 EXPORT_SYMBOL(memcpy);
 
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 163af2c..8ff9253 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -14,7 +14,7 @@
 #include <linux/ptrace.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/uaccess.h>
 
 #include <asm/traps.h>
@@ -168,6 +168,53 @@ int fixup_exception(struct pt_regs *regs)
 }
 
 /*
+ * parisc hardware trap list
+ *
+ * Documented in section 3 "Addressing and Access Control" of the
+ * "PA-RISC 1.1 Architecture and Instruction Set Reference Manual"
+ * https://parisc.wiki.kernel.org/index.php/File:Pa11_acd.pdf
+ *
+ * For implementation see handle_interruption() in traps.c
+ */
+static const char * const trap_description[] = {
+	[1] "High-priority machine check (HPMC)",
+	[2] "Power failure interrupt",
+	[3] "Recovery counter trap",
+	[5] "Low-priority machine check",
+	[6] "Instruction TLB miss fault",
+	[7] "Instruction access rights / protection trap",
+	[8] "Illegal instruction trap",
+	[9] "Break instruction trap",
+	[10] "Privileged operation trap",
+	[11] "Privileged register trap",
+	[12] "Overflow trap",
+	[13] "Conditional trap",
+	[14] "FP Assist Exception trap",
+	[15] "Data TLB miss fault",
+	[16] "Non-access ITLB miss fault",
+	[17] "Non-access DTLB miss fault",
+	[18] "Data memory protection/unaligned access trap",
+	[19] "Data memory break trap",
+	[20] "TLB dirty bit trap",
+	[21] "Page reference trap",
+	[22] "Assist emulation trap",
+	[25] "Taken branch trap",
+	[26] "Data memory access rights trap",
+	[27] "Data memory protection ID trap",
+	[28] "Unaligned data reference trap",
+};
+
+const char *trap_name(unsigned long code)
+{
+	const char *t = NULL;
+
+	if (code < ARRAY_SIZE(trap_description))
+		t = trap_description[code];
+
+	return t ? t : "Unknown trap";
+}
+
+/*
  * Print out info about fatal segfaults, if the show_unhandled_signals
  * sysctl is set:
  */
@@ -186,8 +233,12 @@ show_signal_msg(struct pt_regs *regs, unsigned long code,
 	pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx",
 	    tsk->comm, code, address);
 	print_vma_addr(KERN_CONT " in ", regs->iaoq[0]);
+
+	pr_cont(" trap #%lu: %s%c", code, trap_name(code),
+		vma ? ',':'\n');
+
 	if (vma)
-		pr_warn(" vm_start = 0x%08lx, vm_end = 0x%08lx\n",
+		pr_warn(KERN_CONT " vm_start = 0x%08lx, vm_end = 0x%08lx\n",
 				vma->vm_start, vma->vm_end);
 
 	show_regs(regs);
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 6b3e7c6..e02ada3 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 #include <linux/delay.h>
 #include <linux/init.h>
@@ -79,6 +80,36 @@ static struct resource sysram_resources[MAX_PHYSMEM_RANGES] __read_mostly;
 physmem_range_t pmem_ranges[MAX_PHYSMEM_RANGES] __read_mostly;
 int npmem_ranges __read_mostly;
 
+/*
+ * get_memblock() allocates pages via memblock.
+ * We can't use memblock_find_in_range(0, KERNEL_INITIAL_SIZE) here since it
+ * doesn't allocate from bottom to top which is needed because we only created
+ * the initial mapping up to KERNEL_INITIAL_SIZE in the assembly bootup code.
+ */
+static void * __init get_memblock(unsigned long size)
+{
+	static phys_addr_t search_addr __initdata;
+	phys_addr_t phys;
+
+	if (!search_addr)
+		search_addr = PAGE_ALIGN(__pa((unsigned long) &_end));
+	search_addr = ALIGN(search_addr, size);
+	while (!memblock_is_region_memory(search_addr, size) ||
+		memblock_is_region_reserved(search_addr, size)) {
+		search_addr += size;
+	}
+	phys = search_addr;
+
+	if (phys)
+		memblock_reserve(phys, size);
+	else
+		panic("get_memblock() failed.\n");
+
+	memset(__va(phys), 0, size);
+
+	return __va(phys);
+}
+
 #ifdef CONFIG_64BIT
 #define MAX_MEM         (~0UL)
 #else /* !CONFIG_64BIT */
@@ -118,11 +149,7 @@ static void __init mem_limit_func(void)
 
 static void __init setup_bootmem(void)
 {
-	unsigned long bootmap_size;
 	unsigned long mem_max;
-	unsigned long bootmap_pages;
-	unsigned long bootmap_start_pfn;
-	unsigned long bootmap_pfn;
 #ifndef CONFIG_DISCONTIGMEM
 	physmem_range_t pmem_holes[MAX_PHYSMEM_RANGES - 1];
 	int npmem_holes;
@@ -178,33 +205,29 @@ static void __init setup_bootmem(void)
 	}
 #endif
 
-	if (npmem_ranges > 1) {
-
-		/* Print the memory ranges */
-
-		printk(KERN_INFO "Memory Ranges:\n");
+	/* Print the memory ranges */
+	pr_info("Memory Ranges:\n");
 
-		for (i = 0; i < npmem_ranges; i++) {
-			unsigned long start;
-			unsigned long size;
+	for (i = 0; i < npmem_ranges; i++) {
+		struct resource *res = &sysram_resources[i];
+		unsigned long start;
+		unsigned long size;
 
-			size = (pmem_ranges[i].pages << PAGE_SHIFT);
-			start = (pmem_ranges[i].start_pfn << PAGE_SHIFT);
-			printk(KERN_INFO "%2d) Start 0x%016lx End 0x%016lx Size %6ld MB\n",
-				i,start, start + (size - 1), size >> 20);
-		}
-	}
+		size = (pmem_ranges[i].pages << PAGE_SHIFT);
+		start = (pmem_ranges[i].start_pfn << PAGE_SHIFT);
+		pr_info("%2d) Start 0x%016lx End 0x%016lx Size %6ld MB\n",
+			i, start, start + (size - 1), size >> 20);
 
-	sysram_resource_count = npmem_ranges;
-	for (i = 0; i < sysram_resource_count; i++) {
-		struct resource *res = &sysram_resources[i];
+		/* request memory resource */
 		res->name = "System RAM";
-		res->start = pmem_ranges[i].start_pfn << PAGE_SHIFT;
-		res->end = res->start + (pmem_ranges[i].pages << PAGE_SHIFT)-1;
+		res->start = start;
+		res->end = start + size - 1;
 		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 		request_resource(&iomem_resource, res);
 	}
 
+	sysram_resource_count = npmem_ranges;
+
 	/*
 	 * For 32 bit kernels we limit the amount of memory we can
 	 * support, in order to preserve enough kernel address space
@@ -263,16 +286,9 @@ static void __init setup_bootmem(void)
 	}
 #endif
 
-	bootmap_pages = 0;
-	for (i = 0; i < npmem_ranges; i++)
-		bootmap_pages += bootmem_bootmap_pages(pmem_ranges[i].pages);
-
-	bootmap_start_pfn = PAGE_ALIGN(__pa((unsigned long) &_end)) >> PAGE_SHIFT;
-
 #ifdef CONFIG_DISCONTIGMEM
 	for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
 		memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-		NODE_DATA(i)->bdata = &bootmem_node_data[i];
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
@@ -284,28 +300,24 @@ static void __init setup_bootmem(void)
 
 	/*
 	 * Initialize and free the full range of memory in each range.
-	 * Note that the only writing these routines do are to the bootmap,
-	 * and we've made sure to locate the bootmap properly so that they
-	 * won't be writing over anything important.
 	 */
 
-	bootmap_pfn = bootmap_start_pfn;
 	max_pfn = 0;
 	for (i = 0; i < npmem_ranges; i++) {
 		unsigned long start_pfn;
 		unsigned long npages;
+		unsigned long start;
+		unsigned long size;
 
 		start_pfn = pmem_ranges[i].start_pfn;
 		npages = pmem_ranges[i].pages;
 
-		bootmap_size = init_bootmem_node(NODE_DATA(i),
-						bootmap_pfn,
-						start_pfn,
-						(start_pfn + npages) );
-		free_bootmem_node(NODE_DATA(i),
-				  (start_pfn << PAGE_SHIFT),
-				  (npages << PAGE_SHIFT) );
-		bootmap_pfn += (bootmap_size + PAGE_SIZE - 1) >> PAGE_SHIFT;
+		start = start_pfn << PAGE_SHIFT;
+		size = npages << PAGE_SHIFT;
+
+		/* add system RAM memblock */
+		memblock_add(start, size);
+
 		if ((start_pfn + npages) > max_pfn)
 			max_pfn = start_pfn + npages;
 	}
@@ -317,32 +329,22 @@ static void __init setup_bootmem(void)
 	 */
 	max_low_pfn = max_pfn;
 
-	/* bootmap sizing messed up? */
-	BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
-
 	/* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
 
 #define PDC_CONSOLE_IO_IODC_SIZE 32768
 
-	reserve_bootmem_node(NODE_DATA(0), 0UL,
-			(unsigned long)(PAGE0->mem_free +
-				PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START),
-			(unsigned long)(_end - KERNEL_BINARY_TEXT_START),
-			BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT),
-			((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT),
-			BOOTMEM_DEFAULT);
+	memblock_reserve(0UL, (unsigned long)(PAGE0->mem_free +
+				PDC_CONSOLE_IO_IODC_SIZE));
+	memblock_reserve(__pa(KERNEL_BINARY_TEXT_START),
+			(unsigned long)(_end - KERNEL_BINARY_TEXT_START));
 
 #ifndef CONFIG_DISCONTIGMEM
 
 	/* reserve the holes */
 
 	for (i = 0; i < npmem_holes; i++) {
-		reserve_bootmem_node(NODE_DATA(0),
-				(pmem_holes[i].start_pfn << PAGE_SHIFT),
-				(pmem_holes[i].pages << PAGE_SHIFT),
-				BOOTMEM_DEFAULT);
+		memblock_reserve((pmem_holes[i].start_pfn << PAGE_SHIFT),
+				(pmem_holes[i].pages << PAGE_SHIFT));
 	}
 #endif
 
@@ -360,8 +362,7 @@ static void __init setup_bootmem(void)
 			initrd_below_start_ok = 1;
 			printk(KERN_INFO "initrd: reserving %08lx-%08lx (mem_max %08lx)\n", __pa(initrd_start), __pa(initrd_start) + initrd_reserve, mem_max);
 
-			reserve_bootmem_node(NODE_DATA(0), __pa(initrd_start),
-					initrd_reserve, BOOTMEM_DEFAULT);
+			memblock_reserve(__pa(initrd_start), initrd_reserve);
 		}
 	}
 #endif
@@ -439,7 +440,7 @@ static void __init map_pages(unsigned long start_vaddr,
 		 */
 
 		if (!pmd) {
-			pmd = (pmd_t *) alloc_bootmem_low_pages_node(NODE_DATA(0), PAGE_SIZE << PMD_ORDER);
+			pmd = (pmd_t *) get_memblock(PAGE_SIZE << PMD_ORDER);
 			pmd = (pmd_t *) __pa(pmd);
 		}
 
@@ -458,8 +459,7 @@ static void __init map_pages(unsigned long start_vaddr,
 
 			pg_table = (pte_t *)pmd_address(*pmd);
 			if (!pg_table) {
-				pg_table = (pte_t *)
-					alloc_bootmem_low_pages_node(NODE_DATA(0), PAGE_SIZE);
+				pg_table = (pte_t *) get_memblock(PAGE_SIZE);
 				pg_table = (pte_t *) __pa(pg_table);
 			}
 
@@ -737,7 +737,7 @@ static void __init pagetable_init(void)
 	}
 #endif
 
-	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
+	empty_zero_page = get_memblock(PAGE_SIZE);
 }
 
 static void __init gateway_init(void)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 569b4f9..65fba4c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -108,7 +108,6 @@ config PPC
 	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_HAS_SG_CHAIN
 	select GENERIC_ATOMIC64 if PPC32
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
diff --git a/arch/powerpc/crypto/sha1-powerpc-asm.S b/arch/powerpc/crypto/sha1-powerpc-asm.S
index 125e165..82ddc9b 100644
--- a/arch/powerpc/crypto/sha1-powerpc-asm.S
+++ b/arch/powerpc/crypto/sha1-powerpc-asm.S
@@ -7,6 +7,15 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
+#ifdef __BIG_ENDIAN__
+#define LWZ(rt, d, ra)	\
+	lwz	rt,d(ra)
+#else
+#define LWZ(rt, d, ra)	\
+	li	rt,d;	\
+	lwbrx	rt,rt,ra
+#endif
+
 /*
  * We roll the registers for T, A, B, C, D, E around on each
  * iteration; T on iteration t is A on iteration t+1, and so on.
@@ -23,7 +32,7 @@
 #define W(t)	(((t)%16)+16)
 
 #define LOADW(t)				\
-	lwz	W(t),(t)*4(r4)
+	LWZ(W(t),(t)*4,r4)
 
 #define STEPD0_LOAD(t)				\
 	andc	r0,RD(t),RB(t);		\
@@ -33,7 +42,7 @@
 	add	r0,RE(t),r15;			\
 	add	RT(t),RT(t),r6;		\
 	add	r14,r0,W(t);			\
-	lwz	W((t)+4),((t)+4)*4(r4);	\
+	LWZ(W((t)+4),((t)+4)*4,r4);	\
 	rotlwi	RB(t),RB(t),30;			\
 	add	RT(t),RT(t),r14
 
diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 287a656..e407af2 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -245,6 +245,43 @@ static inline int segment_shift(int ssize)
 }
 
 /*
+ * This array is indexed by the LP field of the HPTE second dword.
+ * Since this field may contain some RPN bits, some entries are
+ * replicated so that we get the same value irrespective of RPN.
+ * The top 4 bits are the page size index (MMU_PAGE_*) for the
+ * actual page size, the bottom 4 bits are the base page size.
+ */
+extern u8 hpte_page_sizes[1 << LP_BITS];
+
+static inline unsigned long __hpte_page_size(unsigned long h, unsigned long l,
+					     bool is_base_size)
+{
+	unsigned int i, lp;
+
+	if (!(h & HPTE_V_LARGE))
+		return 1ul << 12;
+
+	/* Look at the 8 bit LP value */
+	lp = (l >> LP_SHIFT) & ((1 << LP_BITS) - 1);
+	i = hpte_page_sizes[lp];
+	if (!i)
+		return 0;
+	if (!is_base_size)
+		i >>= 4;
+	return 1ul << mmu_psize_defs[i & 0xf].shift;
+}
+
+static inline unsigned long hpte_page_size(unsigned long h, unsigned long l)
+{
+	return __hpte_page_size(h, l, 0);
+}
+
+static inline unsigned long hpte_base_page_size(unsigned long h, unsigned long l)
+{
+	return __hpte_page_size(h, l, 1);
+}
+
+/*
  * The current system page and segment sizes
  */
 extern int mmu_kernel_ssize;
diff --git a/arch/powerpc/include/asm/cpu_has_feature.h b/arch/powerpc/include/asm/cpu_has_feature.h
index 2ef55f8..b312b15 100644
--- a/arch/powerpc/include/asm/cpu_has_feature.h
+++ b/arch/powerpc/include/asm/cpu_has_feature.h
@@ -15,7 +15,7 @@ static inline bool early_cpu_has_feature(unsigned long feature)
 #ifdef CONFIG_JUMP_LABEL_FEATURE_CHECKS
 #include <linux/jump_label.h>
 
-#define NUM_CPU_FTR_KEYS	64
+#define NUM_CPU_FTR_KEYS	BITS_PER_LONG
 
 extern struct static_key_true cpu_feature_keys[NUM_CPU_FTR_KEYS];
 
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 2fd1690..f6fda84 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -241,6 +241,35 @@ static inline void out_be64(volatile u64 __iomem *addr, u64 val)
 #endif
 #endif /* __powerpc64__ */
 
+
+/*
+ * Simple Cache inhibited accessors
+ * Unlike the DEF_MMIO_* macros, these don't include any h/w memory
+ * barriers, callers need to manage memory barriers on their own.
+ * These can only be used in hypervisor real mode.
+ */
+
+static inline u32 _lwzcix(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lwzcix %0,0, %1"
+			     : "=r" (ret) : "r" (addr) : "memory");
+	return ret;
+}
+
+static inline void _stbcix(u64 addr, u8 val)
+{
+	__asm__ __volatile__("stbcix %0,0,%1"
+		: : "r" (val), "r" (addr) : "memory");
+}
+
+static inline void _stwcix(u64 addr, u32 val)
+{
+	__asm__ __volatile__("stwcix %0,0,%1"
+		: : "r" (val), "r" (addr) : "memory");
+}
+
 /*
  * Low level IO stream instructions are defined out of line for now
  */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index 5bca220..05cabed 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -105,6 +105,15 @@
 #define BOOK3S_INTERRUPT_FAC_UNAVAIL	0xf60
 #define BOOK3S_INTERRUPT_H_FAC_UNAVAIL	0xf80
 
+/* book3s_hv */
+
+/*
+ * Special trap used to indicate to host that this is a
+ * passthrough interrupt that could not be handled
+ * completely in the guest.
+ */
+#define BOOK3S_INTERRUPT_HV_RM_HARD	0x5555
+
 #define BOOK3S_IRQPRIO_SYSTEM_RESET		0
 #define BOOK3S_IRQPRIO_DATA_SEGMENT		1
 #define BOOK3S_IRQPRIO_INST_SEGMENT		2
@@ -136,6 +145,7 @@
 #define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
 #define RESUME_FLAG_ARCH1	(1<<2)
+#define RESUME_FLAG_ARCH2	(1<<3)
 
 #define RESUME_GUEST            0
 #define RESUME_GUEST_NV         RESUME_FLAG_NV
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 8f39796..5cf306a 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -69,6 +69,43 @@ struct hpte_cache {
 	int pagesize;
 };
 
+/*
+ * Struct for a virtual core.
+ * Note: entry_exit_map combines a bitmap of threads that have entered
+ * in the bottom 8 bits and a bitmap of threads that have exited in the
+ * next 8 bits.  This is so that we can atomically set the entry bit
+ * iff the exit map is 0 without taking a lock.
+ */
+struct kvmppc_vcore {
+	int n_runnable;
+	int num_threads;
+	int entry_exit_map;
+	int napping_threads;
+	int first_vcpuid;
+	u16 pcpu;
+	u16 last_cpu;
+	u8 vcore_state;
+	u8 in_guest;
+	struct kvmppc_vcore *master_vcore;
+	struct kvm_vcpu *runnable_threads[MAX_SMT_THREADS];
+	struct list_head preempt_list;
+	spinlock_t lock;
+	struct swait_queue_head wq;
+	spinlock_t stoltb_lock;	/* protects stolen_tb and preempt_tb */
+	u64 stolen_tb;
+	u64 preempt_tb;
+	struct kvm_vcpu *runner;
+	struct kvm *kvm;
+	u64 tb_offset;		/* guest timebase - host timebase */
+	ulong lpcr;
+	u32 arch_compat;
+	ulong pcr;
+	ulong dpdes;		/* doorbell state (POWER8) */
+	ulong vtb;		/* virtual timebase */
+	ulong conferring_threads;
+	unsigned int halt_poll_ns;
+};
+
 struct kvmppc_vcpu_book3s {
 	struct kvmppc_sid_map sid_map[SID_MAP_NUM];
 	struct {
@@ -83,6 +120,7 @@ struct kvmppc_vcpu_book3s {
 	u64 sdr1;
 	u64 hior;
 	u64 msr_mask;
+	u64 vtb;
 #ifdef CONFIG_PPC_BOOK3S_32
 	u32 vsid_pool[VSID_POOL_SIZE];
 	u32 vsid_next;
@@ -191,6 +229,7 @@ extern void kvmppc_copy_to_svcpu(struct kvmppc_book3s_shadow_vcpu *svcpu,
 				 struct kvm_vcpu *vcpu);
 extern void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu,
 				   struct kvmppc_book3s_shadow_vcpu *svcpu);
+extern int kvm_irq_bypass;
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index 88d17b4..8482921 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_KVM_BOOK3S_64_H__
 #define __ASM_KVM_BOOK3S_64_H__
 
+#include <asm/book3s/64/mmu-hash.h>
+
 #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
 static inline struct kvmppc_book3s_shadow_vcpu *svcpu_get(struct kvm_vcpu *vcpu)
 {
@@ -97,56 +99,20 @@ static inline void __unlock_hpte(__be64 *hpte, unsigned long hpte_v)
 	hpte[0] = cpu_to_be64(hpte_v);
 }
 
-static inline int __hpte_actual_psize(unsigned int lp, int psize)
-{
-	int i, shift;
-	unsigned int mask;
-
-	/* start from 1 ignoring MMU_PAGE_4K */
-	for (i = 1; i < MMU_PAGE_COUNT; i++) {
-
-		/* invalid penc */
-		if (mmu_psize_defs[psize].penc[i] == -1)
-			continue;
-		/*
-		 * encoding bits per actual page size
-		 *        PTE LP     actual page size
-		 *    rrrr rrrz		>=8KB
-		 *    rrrr rrzz		>=16KB
-		 *    rrrr rzzz		>=32KB
-		 *    rrrr zzzz		>=64KB
-		 * .......
-		 */
-		shift = mmu_psize_defs[i].shift - LP_SHIFT;
-		if (shift > LP_BITS)
-			shift = LP_BITS;
-		mask = (1 << shift) - 1;
-		if ((lp & mask) == mmu_psize_defs[psize].penc[i])
-			return i;
-	}
-	return -1;
-}
-
 static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
 					     unsigned long pte_index)
 {
-	int b_psize = MMU_PAGE_4K, a_psize = MMU_PAGE_4K;
+	int i, b_psize = MMU_PAGE_4K, a_psize = MMU_PAGE_4K;
 	unsigned int penc;
 	unsigned long rb = 0, va_low, sllp;
 	unsigned int lp = (r >> LP_SHIFT) & ((1 << LP_BITS) - 1);
 
 	if (v & HPTE_V_LARGE) {
-		for (b_psize = 0; b_psize < MMU_PAGE_COUNT; b_psize++) {
-
-			/* valid entries have a shift value */
-			if (!mmu_psize_defs[b_psize].shift)
-				continue;
-
-			a_psize = __hpte_actual_psize(lp, b_psize);
-			if (a_psize != -1)
-				break;
-		}
+		i = hpte_page_sizes[lp];
+		b_psize = i & 0xf;
+		a_psize = i >> 4;
 	}
+
 	/*
 	 * Ignore the top 14 bits of va
 	 * v have top two bits covering segment size, hence move
@@ -159,7 +125,6 @@ static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
 	/* This covers 14..54 bits of va*/
 	rb = (v & ~0x7fUL) << 16;		/* AVA field */
 
-	rb |= (v >> HPTE_V_SSIZE_SHIFT) << 8;	/*  B field */
 	/*
 	 * AVA in v had cleared lower 23 bits. We need to derive
 	 * that from pteg index
@@ -211,49 +176,10 @@ static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r,
 		break;
 	}
 	}
-	rb |= (v >> 54) & 0x300;		/* B field */
+	rb |= (v >> HPTE_V_SSIZE_SHIFT) << 8;	/* B field */
 	return rb;
 }
 
-static inline unsigned long __hpte_page_size(unsigned long h, unsigned long l,
-					     bool is_base_size)
-{
-
-	int size, a_psize;
-	/* Look at the 8 bit LP value */
-	unsigned int lp = (l >> LP_SHIFT) & ((1 << LP_BITS) - 1);
-
-	/* only handle 4k, 64k and 16M pages for now */
-	if (!(h & HPTE_V_LARGE))
-		return 1ul << 12;
-	else {
-		for (size = 0; size < MMU_PAGE_COUNT; size++) {
-			/* valid entries have a shift value */
-			if (!mmu_psize_defs[size].shift)
-				continue;
-
-			a_psize = __hpte_actual_psize(lp, size);
-			if (a_psize != -1) {
-				if (is_base_size)
-					return 1ul << mmu_psize_defs[size].shift;
-				return 1ul << mmu_psize_defs[a_psize].shift;
-			}
-		}
-
-	}
-	return 0;
-}
-
-static inline unsigned long hpte_page_size(unsigned long h, unsigned long l)
-{
-	return __hpte_page_size(h, l, 0);
-}
-
-static inline unsigned long hpte_base_page_size(unsigned long h, unsigned long l)
-{
-	return __hpte_page_size(h, l, 1);
-}
-
 static inline unsigned long hpte_rpn(unsigned long ptel, unsigned long psize)
 {
 	return ((ptel & HPTE_R_RPN) & ~(psize - 1)) >> PAGE_SHIFT;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index ec35af3..28350a2 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -43,6 +43,8 @@
 #include <asm/cputhreads.h>
 #define KVM_MAX_VCPU_ID                (threads_per_subcore * KVM_MAX_VCORES)
 
+#define __KVM_HAVE_ARCH_INTC_INITIALIZED
+
 #ifdef CONFIG_KVM_MMIO
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 #endif
@@ -95,42 +97,49 @@ struct kvmppc_vcpu_book3s;
 struct kvmppc_book3s_shadow_vcpu;
 
 struct kvm_vm_stat {
-	u32 remote_tlb_flush;
+	ulong remote_tlb_flush;
 };
 
 struct kvm_vcpu_stat {
-	u32 sum_exits;
-	u32 mmio_exits;
-	u32 signal_exits;
-	u32 light_exits;
+	u64 sum_exits;
+	u64 mmio_exits;
+	u64 signal_exits;
+	u64 light_exits;
 	/* Account for special types of light exits: */
-	u32 itlb_real_miss_exits;
-	u32 itlb_virt_miss_exits;
-	u32 dtlb_real_miss_exits;
-	u32 dtlb_virt_miss_exits;
-	u32 syscall_exits;
-	u32 isi_exits;
-	u32 dsi_exits;
-	u32 emulated_inst_exits;
-	u32 dec_exits;
-	u32 ext_intr_exits;
-	u32 halt_successful_poll;
-	u32 halt_attempted_poll;
-	u32 halt_poll_invalid;
-	u32 halt_wakeup;
-	u32 dbell_exits;
-	u32 gdbell_exits;
-	u32 ld;
-	u32 st;
+	u64 itlb_real_miss_exits;
+	u64 itlb_virt_miss_exits;
+	u64 dtlb_real_miss_exits;
+	u64 dtlb_virt_miss_exits;
+	u64 syscall_exits;
+	u64 isi_exits;
+	u64 dsi_exits;
+	u64 emulated_inst_exits;
+	u64 dec_exits;
+	u64 ext_intr_exits;
+	u64 halt_poll_success_ns;
+	u64 halt_poll_fail_ns;
+	u64 halt_wait_ns;
+	u64 halt_successful_poll;
+	u64 halt_attempted_poll;
+	u64 halt_successful_wait;
+	u64 halt_poll_invalid;
+	u64 halt_wakeup;
+	u64 dbell_exits;
+	u64 gdbell_exits;
+	u64 ld;
+	u64 st;
 #ifdef CONFIG_PPC_BOOK3S
-	u32 pf_storage;
-	u32 pf_instruc;
-	u32 sp_storage;
-	u32 sp_instruc;
-	u32 queue_intr;
-	u32 ld_slow;
-	u32 st_slow;
+	u64 pf_storage;
+	u64 pf_instruc;
+	u64 sp_storage;
+	u64 sp_instruc;
+	u64 queue_intr;
+	u64 ld_slow;
+	u64 st_slow;
 #endif
+	u64 pthru_all;
+	u64 pthru_host;
+	u64 pthru_bad_aff;
 };
 
 enum kvm_exit_types {
@@ -197,6 +206,8 @@ struct kvmppc_spapr_tce_table {
 struct kvmppc_xics;
 struct kvmppc_icp;
 
+struct kvmppc_passthru_irqmap;
+
 /*
  * The reverse mapping array has one entry for each HPTE,
  * which stores the guest's view of the second word of the HPTE
@@ -267,6 +278,7 @@ struct kvm_arch {
 #endif
 #ifdef CONFIG_KVM_XICS
 	struct kvmppc_xics *xics;
+	struct kvmppc_passthru_irqmap *pimap;
 #endif
 	struct kvmppc_ops *kvm_ops;
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
@@ -275,41 +287,6 @@ struct kvm_arch {
 #endif
 };
 
-/*
- * Struct for a virtual core.
- * Note: entry_exit_map combines a bitmap of threads that have entered
- * in the bottom 8 bits and a bitmap of threads that have exited in the
- * next 8 bits.  This is so that we can atomically set the entry bit
- * iff the exit map is 0 without taking a lock.
- */
-struct kvmppc_vcore {
-	int n_runnable;
-	int num_threads;
-	int entry_exit_map;
-	int napping_threads;
-	int first_vcpuid;
-	u16 pcpu;
-	u16 last_cpu;
-	u8 vcore_state;
-	u8 in_guest;
-	struct kvmppc_vcore *master_vcore;
-	struct list_head runnable_threads;
-	struct list_head preempt_list;
-	spinlock_t lock;
-	struct swait_queue_head wq;
-	spinlock_t stoltb_lock;	/* protects stolen_tb and preempt_tb */
-	u64 stolen_tb;
-	u64 preempt_tb;
-	struct kvm_vcpu *runner;
-	struct kvm *kvm;
-	u64 tb_offset;		/* guest timebase - host timebase */
-	ulong lpcr;
-	u32 arch_compat;
-	ulong pcr;
-	ulong dpdes;		/* doorbell state (POWER8) */
-	ulong conferring_threads;
-};
-
 #define VCORE_ENTRY_MAP(vc)	((vc)->entry_exit_map & 0xff)
 #define VCORE_EXIT_MAP(vc)	((vc)->entry_exit_map >> 8)
 #define VCORE_IS_EXITING(vc)	(VCORE_EXIT_MAP(vc) != 0)
@@ -329,6 +306,7 @@ struct kvmppc_vcore {
 #define VCORE_SLEEPING	3
 #define VCORE_RUNNING	4
 #define VCORE_EXITING	5
+#define VCORE_POLLING	6
 
 /*
  * Struct used to manage memory for a virtual processor area
@@ -397,6 +375,20 @@ struct kvmhv_tb_accumulator {
 	u64	tb_max;		/* max time */
 };
 
+#ifdef CONFIG_PPC_BOOK3S_64
+struct kvmppc_irq_map {
+	u32	r_hwirq;
+	u32	v_hwirq;
+	struct irq_desc *desc;
+};
+
+#define	KVMPPC_PIRQ_MAPPED	1024
+struct kvmppc_passthru_irqmap {
+	int n_mapped;
+	struct kvmppc_irq_map mapped[KVMPPC_PIRQ_MAPPED];
+};
+#endif
+
 # ifdef CONFIG_PPC_FSL_BOOK3E
 #define KVMPPC_BOOKE_IAC_NUM	2
 #define KVMPPC_BOOKE_DAC_NUM	2
@@ -483,7 +475,6 @@ struct kvm_vcpu_arch {
 	ulong purr;
 	ulong spurr;
 	ulong ic;
-	ulong vtb;
 	ulong dscr;
 	ulong amr;
 	ulong uamor;
@@ -668,7 +659,6 @@ struct kvm_vcpu_arch {
 	long pgfault_index;
 	unsigned long pgfault_hpte[2];
 
-	struct list_head run_list;
 	struct task_struct *run_task;
 	struct kvm_run *kvm_run;
 
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 2544eda..f6e4964 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -287,6 +287,10 @@ struct kvmppc_ops {
 	long (*arch_vm_ioctl)(struct file *filp, unsigned int ioctl,
 			      unsigned long arg);
 	int (*hcall_implemented)(unsigned long hcall);
+	int (*irq_bypass_add_producer)(struct irq_bypass_consumer *,
+				       struct irq_bypass_producer *);
+	void (*irq_bypass_del_producer)(struct irq_bypass_consumer *,
+					struct irq_bypass_producer *);
 };
 
 extern struct kvmppc_ops *kvmppc_hv_ops;
@@ -453,8 +457,19 @@ static inline int kvmppc_xics_enabled(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.irq_type == KVMPPC_IRQ_XICS;
 }
+
+static inline struct kvmppc_passthru_irqmap *kvmppc_get_passthru_irqmap(
+				struct kvm *kvm)
+{
+	if (kvm && kvm_irq_bypass)
+		return kvm->arch.pimap;
+	return NULL;
+}
+
 extern void kvmppc_alloc_host_rm_ops(void);
 extern void kvmppc_free_host_rm_ops(void);
+extern void kvmppc_free_pimap(struct kvm *kvm);
+extern int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall);
 extern void kvmppc_xics_free_icp(struct kvm_vcpu *vcpu);
 extern int kvmppc_xics_create_icp(struct kvm_vcpu *vcpu, unsigned long server);
 extern int kvm_vm_ioctl_xics_irq(struct kvm *kvm, struct kvm_irq_level *args);
@@ -464,10 +479,23 @@ extern int kvmppc_xics_set_icp(struct kvm_vcpu *vcpu, u64 icpval);
 extern int kvmppc_xics_connect_vcpu(struct kvm_device *dev,
 			struct kvm_vcpu *vcpu, u32 cpu);
 extern void kvmppc_xics_ipi_action(void);
+extern void kvmppc_xics_set_mapped(struct kvm *kvm, unsigned long guest_irq,
+				   unsigned long host_irq);
+extern void kvmppc_xics_clr_mapped(struct kvm *kvm, unsigned long guest_irq,
+				   unsigned long host_irq);
+extern long kvmppc_deliver_irq_passthru(struct kvm_vcpu *vcpu, u32 xirr,
+				 struct kvmppc_irq_map *irq_map,
+				 struct kvmppc_passthru_irqmap *pimap);
 extern int h_ipi_redirect;
 #else
+static inline struct kvmppc_passthru_irqmap *kvmppc_get_passthru_irqmap(
+				struct kvm *kvm)
+	{ return NULL; }
 static inline void kvmppc_alloc_host_rm_ops(void) {};
 static inline void kvmppc_free_host_rm_ops(void) {};
+static inline void kvmppc_free_pimap(struct kvm *kvm) {};
+static inline int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall)
+	{ return 0; }
 static inline int kvmppc_xics_enabled(struct kvm_vcpu *vcpu)
 	{ return 0; }
 static inline void kvmppc_xics_free_icp(struct kvm_vcpu *vcpu) { }
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 79c989a..e883683 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -275,6 +275,7 @@ static inline bool early_radix_enabled(void)
 #define MMU_PAGE_16G	13
 #define MMU_PAGE_64G	14
 
+/* N.B. we need to change the type of hpte_page_sizes if this gets to be > 16 */
 #define MMU_PAGE_COUNT	15
 
 #ifdef CONFIG_PPC_BOOK3S_64
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 7b58917..4d52ccf 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -41,6 +41,9 @@ u64 memory_hotplug_max(void);
 #else
 #define memory_hotplug_max() memblock_end_of_DRAM()
 #endif /* CONFIG_NEED_MULTIPLE_NODES */
+#ifdef CONFIG_FA_DUMP
+#define __HAVE_ARCH_RESERVED_KERNEL_PAGES
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_MMZONE_H_ */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index ee05bd2..e958b70 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -67,6 +67,7 @@ int64_t opal_pci_config_write_half_word(uint64_t phb_id, uint64_t bus_dev_func,
 int64_t opal_pci_config_write_word(uint64_t phb_id, uint64_t bus_dev_func,
 				   uint64_t offset, uint32_t data);
 int64_t opal_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
+int64_t opal_rm_set_xive(uint32_t isn, uint16_t server, uint8_t priority);
 int64_t opal_get_xive(uint32_t isn, __be16 *server, uint8_t *priority);
 int64_t opal_register_exception_handler(uint64_t opal_exception,
 					uint64_t handler_address,
diff --git a/arch/powerpc/include/asm/pnv-pci.h b/arch/powerpc/include/asm/pnv-pci.h
index 74b0b1e..696438f 100644
--- a/arch/powerpc/include/asm/pnv-pci.h
+++ b/arch/powerpc/include/asm/pnv-pci.h
@@ -12,6 +12,7 @@
 
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/irq.h>
 #include <misc/cxl-base.h>
 #include <asm/opal-api.h>
 
@@ -33,6 +34,8 @@ int pnv_cxl_alloc_hwirqs(struct pci_dev *dev, int num);
 void pnv_cxl_release_hwirqs(struct pci_dev *dev, int hwirq, int num);
 int pnv_cxl_get_irq_count(struct pci_dev *dev);
 struct device_node *pnv_pci_get_phb_node(struct pci_dev *dev);
+int64_t pnv_opal_pci_msi_eoi(struct irq_chip *chip, unsigned int hw_irq);
+bool is_pnv_opal_msi(struct irq_chip *chip);
 
 #ifdef CONFIG_CXL_BASE
 int pnv_cxl_alloc_hwirq_ranges(struct cxl_irq_ranges *irqs,
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index cff7988..9cd4e8c 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -740,6 +740,7 @@
 #define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1	798
 #define SPRN_MMCR2	785
+#define SPRN_UMMCR2	769
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index c1dc6c1..c266227 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -308,40 +308,21 @@ extern unsigned long __copy_tofrom_user(void __user *to,
 static inline unsigned long copy_from_user(void *to,
 		const void __user *from, unsigned long n)
 {
-	unsigned long over;
-
-	if (access_ok(VERIFY_READ, from, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(to, n, false);
+	if (likely(access_ok(VERIFY_READ, from, n))) {
+		check_object_size(to, n, false);
 		return __copy_tofrom_user((__force void __user *)to, from, n);
 	}
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + n - TASK_SIZE;
-		if (!__builtin_constant_p(n - over))
-			check_object_size(to, n - over, false);
-		return __copy_tofrom_user((__force void __user *)to, from,
-				n - over) + over;
-	}
+	memset(to, 0, n);
 	return n;
 }
 
 static inline unsigned long copy_to_user(void __user *to,
 		const void *from, unsigned long n)
 {
-	unsigned long over;
-
 	if (access_ok(VERIFY_WRITE, to, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(from, n, true);
+		check_object_size(from, n, true);
 		return __copy_tofrom_user(to, (__force void __user *)from, n);
 	}
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + n - TASK_SIZE;
-		if (!__builtin_constant_p(n))
-			check_object_size(from, n - over, true);
-		return __copy_tofrom_user(to, (__force void __user *)from,
-				n - over) + over;
-	}
 	return n;
 }
 
@@ -383,8 +364,7 @@ static inline unsigned long __copy_from_user_inatomic(void *to,
 			return 0;
 	}
 
-	if (!__builtin_constant_p(n))
-		check_object_size(to, n, false);
+	check_object_size(to, n, false);
 
 	return __copy_tofrom_user((__force void __user *)to, from, n);
 }
@@ -412,8 +392,8 @@ static inline unsigned long __copy_to_user_inatomic(void __user *to,
 		if (ret == 0)
 			return 0;
 	}
-	if (!__builtin_constant_p(n))
-		check_object_size(from, n, true);
+
+	check_object_size(from, n, true);
 
 	return __copy_tofrom_user(to, (__force const void __user *)from, n);
 }
@@ -439,10 +419,6 @@ static inline unsigned long clear_user(void __user *addr, unsigned long size)
 	might_fault();
 	if (likely(access_ok(VERIFY_WRITE, addr, size)))
 		return __clear_user(addr, size);
-	if ((unsigned long)addr < TASK_SIZE) {
-		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
-		return __clear_user(addr, size - over) + over;
-	}
 	return size;
 }
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index dd0fc33..caec7bf 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -506,7 +506,6 @@ int main(void)
 	DEFINE(VCPU_PURR, offsetof(struct kvm_vcpu, arch.purr));
 	DEFINE(VCPU_SPURR, offsetof(struct kvm_vcpu, arch.spurr));
 	DEFINE(VCPU_IC, offsetof(struct kvm_vcpu, arch.ic));
-	DEFINE(VCPU_VTB, offsetof(struct kvm_vcpu, arch.vtb));
 	DEFINE(VCPU_DSCR, offsetof(struct kvm_vcpu, arch.dscr));
 	DEFINE(VCPU_AMR, offsetof(struct kvm_vcpu, arch.amr));
 	DEFINE(VCPU_UAMOR, offsetof(struct kvm_vcpu, arch.uamor));
@@ -557,6 +556,7 @@ int main(void)
 	DEFINE(VCORE_LPCR, offsetof(struct kvmppc_vcore, lpcr));
 	DEFINE(VCORE_PCR, offsetof(struct kvmppc_vcore, pcr));
 	DEFINE(VCORE_DPDES, offsetof(struct kvmppc_vcore, dpdes));
+	DEFINE(VCORE_VTB, offsetof(struct kvmppc_vcore, vtb));
 	DEFINE(VCPU_SLB_E, offsetof(struct kvmppc_slb, orige));
 	DEFINE(VCPU_SLB_V, offsetof(struct kvmppc_slb, origv));
 	DEFINE(VCPU_SLB_SIZE, sizeof(struct kvmppc_slb));
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 963918e..8f0c7c5 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -333,6 +333,11 @@ int __init fadump_reserve_mem(void)
 	return 1;
 }
 
+unsigned long __init arch_reserved_kernel_pages(void)
+{
+	return memblock_reserved_size() / PAGE_SIZE;
+}
+
 /* Look for fadump= cmdline option. */
 static int __init early_fadump_param(char *p)
 {
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index cc52d97..a95639b 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -593,7 +593,8 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 	if (!ftrace_graph_entry(&trace))
 		goto out;
 
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
+	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
+				     NULL) == -EBUSY)
 		goto out;
 
 	parent = return_hooker;
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 2265c63..bd739fe 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -411,7 +411,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
  *
  * r13 - PACA
  * cr3 - gt if waking up with partial/complete hypervisor state loss
- * cr4 - eq if waking up from complete hypervisor state loss.
+ * cr4 - gt or eq if waking up from complete hypervisor state loss.
  */
 _GLOBAL(pnv_wakeup_tb_loss)
 	ld	r1,PACAR1(r13)
@@ -453,7 +453,7 @@ lwarx_loop2:
 	 * At this stage
 	 * cr2 - eq if first thread to wakeup in core
 	 * cr3-  gt if waking up with partial/complete hypervisor state loss
-	 * cr4 - eq if waking up from complete hypervisor state loss.
+	 * cr4 - gt or eq if waking up from complete hypervisor state loss.
 	 */
 
 	ori	r15,r15,PNV_CORE_IDLE_LOCK_BIT
@@ -481,7 +481,7 @@ first_thread_in_subcore:
 	 * If waking up from sleep, subcore state is not lost. Hence
 	 * skip subcore state restore
 	 */
-	bne	cr4,subcore_state_restored
+	blt	cr4,subcore_state_restored
 
 	/* Restore per-subcore state */
 	ld      r4,_SDR1(r1)
@@ -526,7 +526,7 @@ timebase_resync:
 	 * If waking up from sleep, per core state is not lost, skip to
 	 * clear_lock.
 	 */
-	bne	cr4,clear_lock
+	blt	cr4,clear_lock
 
 	/*
 	 * First thread in the core to wake up and its waking up with
@@ -557,7 +557,7 @@ common_exit:
 	 * If waking up from sleep, hypervisor state is not lost. Hence
 	 * skip hypervisor state restore.
 	 */
-	bne	cr4,hypervisor_state_restored
+	blt	cr4,hypervisor_state_restored
 
 	/* Waking up from winkle */
 
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 37d6e74..5f202a5 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -479,7 +479,8 @@ int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 
 		/* Handle failure */
 		if (unlikely(entry == DMA_ERROR_CODE)) {
-			if (printk_ratelimit())
+			if (!(attrs & DMA_ATTR_NO_WARN) &&
+			    printk_ratelimit())
 				dev_info(dev, "iommu_alloc failed, tbl %p "
 					 "vaddr %lx npages %lu\n", tbl, vaddr,
 					 npages);
@@ -776,7 +777,8 @@ dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
 					 mask >> tbl->it_page_shift, align,
 					 attrs);
 		if (dma_handle == DMA_ERROR_CODE) {
-			if (printk_ratelimit())  {
+			if (!(attrs & DMA_ATTR_NO_WARN) &&
+			    printk_ratelimit())  {
 				dev_info(dev, "iommu_alloc failed, tbl %p "
 					 "vaddr %p npages %d\n", tbl, vaddr,
 					 npages);
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 2d1cfaf..8295f51 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -99,6 +99,7 @@ SECTIONS
 		/* careful! __ftr_alt_* sections need to be close to .text */
 		*(.text .fixup __ftr_alt_* .ref.text)
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index c2024ac..029be26 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -22,6 +22,9 @@ config KVM
 	select ANON_INODES
 	select HAVE_KVM_EVENTFD
 	select SRCU
+	select KVM_VFIO
+	select IRQ_BYPASS_MANAGER
+	select HAVE_KVM_IRQ_BYPASS
 
 config KVM_BOOK3S_HANDLER
 	bool
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 855d4b9..7dd89b7 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -7,16 +7,16 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 ccflags-y := -Ivirt/kvm -Iarch/powerpc/kvm
 KVM := ../../../virt/kvm
 
-common-objs-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
-		$(KVM)/eventfd.o
+common-objs-y = $(KVM)/kvm_main.o $(KVM)/eventfd.o
 common-objs-$(CONFIG_KVM_VFIO) += $(KVM)/vfio.o
+common-objs-$(CONFIG_KVM_MMIO) += $(KVM)/coalesced_mmio.o
 
 CFLAGS_e500_mmu.o := -I.
 CFLAGS_e500_mmu_host.o := -I.
 CFLAGS_emulate.o  := -I.
 CFLAGS_emulate_loadstore.o  := -I.
 
-common-objs-y += powerpc.o emulate.o emulate_loadstore.o
+common-objs-y += powerpc.o emulate_loadstore.o
 obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
 obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o
 
@@ -24,6 +24,7 @@ AFLAGS_booke_interrupts.o := -I$(objtree)/$(obj)
 
 kvm-e500-objs := \
 	$(common-objs-y) \
+	emulate.o \
 	booke.o \
 	booke_emulate.o \
 	booke_interrupts.o \
@@ -35,6 +36,7 @@ kvm-objs-$(CONFIG_KVM_E500V2) := $(kvm-e500-objs)
 
 kvm-e500mc-objs := \
 	$(common-objs-y) \
+	emulate.o \
 	booke.o \
 	booke_emulate.o \
 	bookehv_interrupts.o \
@@ -61,9 +63,6 @@ kvm-pr-y := \
 	book3s_32_mmu.o
 
 ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
-kvm-book3s_64-module-objs := \
-	$(KVM)/coalesced_mmio.o
-
 kvm-book3s_64-builtin-objs-$(CONFIG_KVM_BOOK3S_64_HANDLER) += \
 	book3s_rmhandlers.o
 endif
@@ -89,11 +88,8 @@ endif
 kvm-book3s_64-objs-$(CONFIG_KVM_XICS) += \
 	book3s_xics.o
 
-kvm-book3s_64-module-objs += \
-	$(KVM)/kvm_main.o \
-	$(KVM)/eventfd.o \
-	powerpc.o \
-	emulate_loadstore.o \
+kvm-book3s_64-module-objs := \
+	$(common-objs-y) \
 	book3s.o \
 	book3s_64_vio.o \
 	book3s_rtas.o \
@@ -103,6 +99,7 @@ kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-module-objs)
 
 kvm-book3s_32-objs := \
 	$(common-objs-y) \
+	emulate.o \
 	fpu.o \
 	book3s_paired_singles.o \
 	book3s.o \
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 47018fc..b6952dd 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -52,8 +52,12 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "dec",         VCPU_STAT(dec_exits) },
 	{ "ext_intr",    VCPU_STAT(ext_intr_exits) },
 	{ "queue_intr",  VCPU_STAT(queue_intr) },
+	{ "halt_poll_success_ns",	VCPU_STAT(halt_poll_success_ns) },
+	{ "halt_poll_fail_ns",		VCPU_STAT(halt_poll_fail_ns) },
+	{ "halt_wait_ns",		VCPU_STAT(halt_wait_ns) },
 	{ "halt_successful_poll", VCPU_STAT(halt_successful_poll), },
 	{ "halt_attempted_poll", VCPU_STAT(halt_attempted_poll), },
+	{ "halt_successful_wait",	VCPU_STAT(halt_successful_wait) },
 	{ "halt_poll_invalid", VCPU_STAT(halt_poll_invalid) },
 	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
 	{ "pf_storage",  VCPU_STAT(pf_storage) },
@@ -64,6 +68,9 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "ld_slow",     VCPU_STAT(ld_slow) },
 	{ "st",          VCPU_STAT(st) },
 	{ "st_slow",     VCPU_STAT(st_slow) },
+	{ "pthru_all",       VCPU_STAT(pthru_all) },
+	{ "pthru_host",      VCPU_STAT(pthru_host) },
+	{ "pthru_bad_aff",   VCPU_STAT(pthru_bad_aff) },
 	{ NULL }
 };
 
@@ -592,9 +599,6 @@ int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id,
 		case KVM_REG_PPC_BESCR:
 			*val = get_reg_val(id, vcpu->arch.bescr);
 			break;
-		case KVM_REG_PPC_VTB:
-			*val = get_reg_val(id, vcpu->arch.vtb);
-			break;
 		case KVM_REG_PPC_IC:
 			*val = get_reg_val(id, vcpu->arch.ic);
 			break;
@@ -666,9 +670,6 @@ int kvmppc_set_one_reg(struct kvm_vcpu *vcpu, u64 id,
 		case KVM_REG_PPC_BESCR:
 			vcpu->arch.bescr = set_reg_val(id, *val);
 			break;
-		case KVM_REG_PPC_VTB:
-			vcpu->arch.vtb = set_reg_val(id, *val);
-			break;
 		case KVM_REG_PPC_IC:
 			vcpu->arch.ic = set_reg_val(id, *val);
 			break;
diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c
index 2afdb9c..8359752 100644
--- a/arch/powerpc/kvm/book3s_emulate.c
+++ b/arch/powerpc/kvm/book3s_emulate.c
@@ -498,6 +498,7 @@ int kvmppc_core_emulate_mtspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong spr_val)
 	case SPRN_MMCR0:
 	case SPRN_MMCR1:
 	case SPRN_MMCR2:
+	case SPRN_UMMCR2:
 #endif
 		break;
 unprivileged:
@@ -579,7 +580,7 @@ int kvmppc_core_emulate_mfspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val
 		*spr_val = vcpu->arch.spurr;
 		break;
 	case SPRN_VTB:
-		*spr_val = vcpu->arch.vtb;
+		*spr_val = to_book3s(vcpu)->vtb;
 		break;
 	case SPRN_IC:
 		*spr_val = vcpu->arch.ic;
@@ -640,6 +641,7 @@ int kvmppc_core_emulate_mfspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val
 	case SPRN_MMCR0:
 	case SPRN_MMCR1:
 	case SPRN_MMCR2:
+	case SPRN_UMMCR2:
 	case SPRN_TIR:
 #endif
 		*spr_val = 0;
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 2fd5580..3686471 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -53,11 +53,15 @@
 #include <asm/smp.h>
 #include <asm/dbell.h>
 #include <asm/hmi.h>
+#include <asm/pnv-pci.h>
 #include <linux/gfp.h>
 #include <linux/vmalloc.h>
 #include <linux/highmem.h>
 #include <linux/hugetlb.h>
+#include <linux/kvm_irqfd.h>
+#include <linux/irqbypass.h>
 #include <linux/module.h>
+#include <linux/compiler.h>
 
 #include "book3s.h"
 
@@ -70,6 +74,8 @@
 
 /* Used to indicate that a guest page fault needs to be handled */
 #define RESUME_PAGE_FAULT	(RESUME_GUEST | RESUME_FLAG_ARCH1)
+/* Used to indicate that a guest passthrough interrupt needs to be handled */
+#define RESUME_PASSTHROUGH	(RESUME_GUEST | RESUME_FLAG_ARCH2)
 
 /* Used as a "null" value for timebase values */
 #define TB_NIL	(~(u64)0)
@@ -89,14 +95,55 @@ static struct kernel_param_ops module_param_ops = {
 	.get = param_get_int,
 };
 
+module_param_cb(kvm_irq_bypass, &module_param_ops, &kvm_irq_bypass,
+							S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(kvm_irq_bypass, "Bypass passthrough interrupt optimization");
+
 module_param_cb(h_ipi_redirect, &module_param_ops, &h_ipi_redirect,
 							S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(h_ipi_redirect, "Redirect H_IPI wakeup to a free host core");
 #endif
 
+/* Maximum halt poll interval defaults to KVM_HALT_POLL_NS_DEFAULT */
+static unsigned int halt_poll_max_ns = KVM_HALT_POLL_NS_DEFAULT;
+module_param(halt_poll_max_ns, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(halt_poll_max_ns, "Maximum halt poll time in ns");
+
+/* Factor by which the vcore halt poll interval is grown, default is to double
+ */
+static unsigned int halt_poll_ns_grow = 2;
+module_param(halt_poll_ns_grow, int, S_IRUGO);
+MODULE_PARM_DESC(halt_poll_ns_grow, "Factor halt poll time is grown by");
+
+/* Factor by which the vcore halt poll interval is shrunk, default is to reset
+ */
+static unsigned int halt_poll_ns_shrink;
+module_param(halt_poll_ns_shrink, int, S_IRUGO);
+MODULE_PARM_DESC(halt_poll_ns_shrink, "Factor halt poll time is shrunk by");
+
 static void kvmppc_end_cede(struct kvm_vcpu *vcpu);
 static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu);
 
+static inline struct kvm_vcpu *next_runnable_thread(struct kvmppc_vcore *vc,
+		int *ip)
+{
+	int i = *ip;
+	struct kvm_vcpu *vcpu;
+
+	while (++i < MAX_SMT_THREADS) {
+		vcpu = READ_ONCE(vc->runnable_threads[i]);
+		if (vcpu) {
+			*ip = i;
+			return vcpu;
+		}
+	}
+	return NULL;
+}
+
+/* Used to traverse the list of runnable threads for a given vcore */
+#define for_each_runnable_thread(i, vcpu, vc) \
+	for (i = -1; (vcpu = next_runnable_thread(vc, &i)); )
+
 static bool kvmppc_ipi_thread(int cpu)
 {
 	/* On POWER8 for IPIs to threads in the same core, use msgsnd */
@@ -991,6 +1038,9 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 		kvmppc_core_queue_program(vcpu, SRR1_PROGILL);
 		r = RESUME_GUEST;
 		break;
+	case BOOK3S_INTERRUPT_HV_RM_HARD:
+		r = RESUME_PASSTHROUGH;
+		break;
 	default:
 		kvmppc_dump_regs(vcpu);
 		printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
@@ -1149,6 +1199,9 @@ static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
 	case KVM_REG_PPC_DPDES:
 		*val = get_reg_val(id, vcpu->arch.vcore->dpdes);
 		break;
+	case KVM_REG_PPC_VTB:
+		*val = get_reg_val(id, vcpu->arch.vcore->vtb);
+		break;
 	case KVM_REG_PPC_DAWR:
 		*val = get_reg_val(id, vcpu->arch.dawr);
 		break;
@@ -1341,6 +1394,9 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id,
 	case KVM_REG_PPC_DPDES:
 		vcpu->arch.vcore->dpdes = set_reg_val(id, *val);
 		break;
+	case KVM_REG_PPC_VTB:
+		vcpu->arch.vcore->vtb = set_reg_val(id, *val);
+		break;
 	case KVM_REG_PPC_DAWR:
 		vcpu->arch.dawr = set_reg_val(id, *val);
 		break;
@@ -1493,7 +1549,6 @@ static struct kvmppc_vcore *kvmppc_vcore_create(struct kvm *kvm, int core)
 	if (vcore == NULL)
 		return NULL;
 
-	INIT_LIST_HEAD(&vcore->runnable_threads);
 	spin_lock_init(&vcore->lock);
 	spin_lock_init(&vcore->stoltb_lock);
 	init_swait_queue_head(&vcore->wq);
@@ -1802,7 +1857,7 @@ static void kvmppc_remove_runnable(struct kvmppc_vcore *vc,
 	vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
 	spin_unlock_irq(&vcpu->arch.tbacct_lock);
 	--vc->n_runnable;
-	list_del(&vcpu->arch.run_list);
+	WRITE_ONCE(vc->runnable_threads[vcpu->arch.ptid], NULL);
 }
 
 static int kvmppc_grab_hwthread(int cpu)
@@ -2048,66 +2103,6 @@ static void init_master_vcore(struct kvmppc_vcore *vc)
 	vc->conferring_threads = 0;
 }
 
-/*
- * See if the existing subcores can be split into 3 (or fewer) subcores
- * of at most two threads each, so we can fit in another vcore.  This
- * assumes there are at most two subcores and at most 6 threads in total.
- */
-static bool can_split_piggybacked_subcores(struct core_info *cip)
-{
-	int sub, new_sub;
-	int large_sub = -1;
-	int thr;
-	int n_subcores = cip->n_subcores;
-	struct kvmppc_vcore *vc, *vcnext;
-	struct kvmppc_vcore *master_vc = NULL;
-
-	for (sub = 0; sub < cip->n_subcores; ++sub) {
-		if (cip->subcore_threads[sub] <= 2)
-			continue;
-		if (large_sub >= 0)
-			return false;
-		large_sub = sub;
-		vc = list_first_entry(&cip->vcs[sub], struct kvmppc_vcore,
-				      preempt_list);
-		if (vc->num_threads > 2)
-			return false;
-		n_subcores += (cip->subcore_threads[sub] - 1) >> 1;
-	}
-	if (large_sub < 0 || !subcore_config_ok(n_subcores + 1, 2))
-		return false;
-
-	/*
-	 * Seems feasible, so go through and move vcores to new subcores.
-	 * Note that when we have two or more vcores in one subcore,
-	 * all those vcores must have only one thread each.
-	 */
-	new_sub = cip->n_subcores;
-	thr = 0;
-	sub = large_sub;
-	list_for_each_entry_safe(vc, vcnext, &cip->vcs[sub], preempt_list) {
-		if (thr >= 2) {
-			list_del(&vc->preempt_list);
-			list_add_tail(&vc->preempt_list, &cip->vcs[new_sub]);
-			/* vc->num_threads must be 1 */
-			if (++cip->subcore_threads[new_sub] == 1) {
-				cip->subcore_vm[new_sub] = vc->kvm;
-				init_master_vcore(vc);
-				master_vc = vc;
-				++cip->n_subcores;
-			} else {
-				vc->master_vcore = master_vc;
-				++new_sub;
-			}
-		}
-		thr += vc->num_threads;
-	}
-	cip->subcore_threads[large_sub] = 2;
-	cip->max_subcore_threads = 2;
-
-	return true;
-}
-
 static bool can_dynamic_split(struct kvmppc_vcore *vc, struct core_info *cip)
 {
 	int n_threads = vc->num_threads;
@@ -2118,23 +2113,9 @@ static bool can_dynamic_split(struct kvmppc_vcore *vc, struct core_info *cip)
 
 	if (n_threads < cip->max_subcore_threads)
 		n_threads = cip->max_subcore_threads;
-	if (subcore_config_ok(cip->n_subcores + 1, n_threads)) {
-		cip->max_subcore_threads = n_threads;
-	} else if (cip->n_subcores <= 2 && cip->total_threads <= 6 &&
-		   vc->num_threads <= 2) {
-		/*
-		 * We may be able to fit another subcore in by
-		 * splitting an existing subcore with 3 or 4
-		 * threads into two 2-thread subcores, or one
-		 * with 5 or 6 threads into three subcores.
-		 * We can only do this if those subcores have
-		 * piggybacked virtual cores.
-		 */
-		if (!can_split_piggybacked_subcores(cip))
-			return false;
-	} else {
+	if (!subcore_config_ok(cip->n_subcores + 1, n_threads))
 		return false;
-	}
+	cip->max_subcore_threads = n_threads;
 
 	sub = cip->n_subcores;
 	++cip->n_subcores;
@@ -2148,43 +2129,6 @@ static bool can_dynamic_split(struct kvmppc_vcore *vc, struct core_info *cip)
 	return true;
 }
 
-static bool can_piggyback_subcore(struct kvmppc_vcore *pvc,
-				  struct core_info *cip, int sub)
-{
-	struct kvmppc_vcore *vc;
-	int n_thr;
-
-	vc = list_first_entry(&cip->vcs[sub], struct kvmppc_vcore,
-			      preempt_list);
-
-	/* require same VM and same per-core reg values */
-	if (pvc->kvm != vc->kvm ||
-	    pvc->tb_offset != vc->tb_offset ||
-	    pvc->pcr != vc->pcr ||
-	    pvc->lpcr != vc->lpcr)
-		return false;
-
-	/* P8 guest with > 1 thread per core would see wrong TIR value */
-	if (cpu_has_feature(CPU_FTR_ARCH_207S) &&
-	    (vc->num_threads > 1 || pvc->num_threads > 1))
-		return false;
-
-	n_thr = cip->subcore_threads[sub] + pvc->num_threads;
-	if (n_thr > cip->max_subcore_threads) {
-		if (!subcore_config_ok(cip->n_subcores, n_thr))
-			return false;
-		cip->max_subcore_threads = n_thr;
-	}
-
-	cip->total_threads += pvc->num_threads;
-	cip->subcore_threads[sub] = n_thr;
-	pvc->master_vcore = vc;
-	list_del(&pvc->preempt_list);
-	list_add_tail(&pvc->preempt_list, &cip->vcs[sub]);
-
-	return true;
-}
-
 /*
  * Work out whether it is possible to piggyback the execution of
  * vcore *pvc onto the execution of the other vcores described in *cip.
@@ -2192,27 +2136,18 @@ static bool can_piggyback_subcore(struct kvmppc_vcore *pvc,
 static bool can_piggyback(struct kvmppc_vcore *pvc, struct core_info *cip,
 			  int target_threads)
 {
-	int sub;
-
 	if (cip->total_threads + pvc->num_threads > target_threads)
 		return false;
-	for (sub = 0; sub < cip->n_subcores; ++sub)
-		if (cip->subcore_threads[sub] &&
-		    can_piggyback_subcore(pvc, cip, sub))
-			return true;
-
-	if (can_dynamic_split(pvc, cip))
-		return true;
 
-	return false;
+	return can_dynamic_split(pvc, cip);
 }
 
 static void prepare_threads(struct kvmppc_vcore *vc)
 {
-	struct kvm_vcpu *vcpu, *vnext;
+	int i;
+	struct kvm_vcpu *vcpu;
 
-	list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads,
-				 arch.run_list) {
+	for_each_runnable_thread(i, vcpu, vc) {
 		if (signal_pending(vcpu->arch.run_task))
 			vcpu->arch.ret = -EINTR;
 		else if (vcpu->arch.vpa.update_pending ||
@@ -2259,15 +2194,14 @@ static void collect_piggybacks(struct core_info *cip, int target_threads)
 
 static void post_guest_process(struct kvmppc_vcore *vc, bool is_master)
 {
-	int still_running = 0;
+	int still_running = 0, i;
 	u64 now;
 	long ret;
-	struct kvm_vcpu *vcpu, *vnext;
+	struct kvm_vcpu *vcpu;
 
 	spin_lock(&vc->lock);
 	now = get_tb();
-	list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads,
-				 arch.run_list) {
+	for_each_runnable_thread(i, vcpu, vc) {
 		/* cancel pending dec exception if dec is positive */
 		if (now < vcpu->arch.dec_expires &&
 		    kvmppc_core_pending_dec(vcpu))
@@ -2307,8 +2241,8 @@ static void post_guest_process(struct kvmppc_vcore *vc, bool is_master)
 		}
 		if (vc->n_runnable > 0 && vc->runner == NULL) {
 			/* make sure there's a candidate runner awake */
-			vcpu = list_first_entry(&vc->runnable_threads,
-						struct kvm_vcpu, arch.run_list);
+			i = -1;
+			vcpu = next_runnable_thread(vc, &i);
 			wake_up(&vcpu->arch.cpu_run);
 		}
 	}
@@ -2361,7 +2295,7 @@ static inline void kvmppc_set_host_core(int cpu)
  */
 static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 {
-	struct kvm_vcpu *vcpu, *vnext;
+	struct kvm_vcpu *vcpu;
 	int i;
 	int srcu_idx;
 	struct core_info core_info;
@@ -2397,8 +2331,7 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 	 */
 	if ((threads_per_core > 1) &&
 	    ((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
-		list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads,
-					 arch.run_list) {
+		for_each_runnable_thread(i, vcpu, vc) {
 			vcpu->arch.ret = -EBUSY;
 			kvmppc_remove_runnable(vc, vcpu);
 			wake_up(&vcpu->arch.cpu_run);
@@ -2477,8 +2410,7 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 		active |= 1 << thr;
 		list_for_each_entry(pvc, &core_info.vcs[sub], preempt_list) {
 			pvc->pcpu = pcpu + thr;
-			list_for_each_entry(vcpu, &pvc->runnable_threads,
-					    arch.run_list) {
+			for_each_runnable_thread(i, vcpu, pvc) {
 				kvmppc_start_thread(vcpu, pvc);
 				kvmppc_create_dtl_entry(vcpu, pvc);
 				trace_kvm_guest_enter(vcpu);
@@ -2604,34 +2536,92 @@ static void kvmppc_wait_for_exec(struct kvmppc_vcore *vc,
 	finish_wait(&vcpu->arch.cpu_run, &wait);
 }
 
+static void grow_halt_poll_ns(struct kvmppc_vcore *vc)
+{
+	/* 10us base */
+	if (vc->halt_poll_ns == 0 && halt_poll_ns_grow)
+		vc->halt_poll_ns = 10000;
+	else
+		vc->halt_poll_ns *= halt_poll_ns_grow;
+
+	if (vc->halt_poll_ns > halt_poll_max_ns)
+		vc->halt_poll_ns = halt_poll_max_ns;
+}
+
+static void shrink_halt_poll_ns(struct kvmppc_vcore *vc)
+{
+	if (halt_poll_ns_shrink == 0)
+		vc->halt_poll_ns = 0;
+	else
+		vc->halt_poll_ns /= halt_poll_ns_shrink;
+}
+
+/* Check to see if any of the runnable vcpus on the vcore have pending
+ * exceptions or are no longer ceded
+ */
+static int kvmppc_vcore_check_block(struct kvmppc_vcore *vc)
+{
+	struct kvm_vcpu *vcpu;
+	int i;
+
+	for_each_runnable_thread(i, vcpu, vc) {
+		if (vcpu->arch.pending_exceptions || !vcpu->arch.ceded)
+			return 1;
+	}
+
+	return 0;
+}
+
 /*
  * All the vcpus in this vcore are idle, so wait for a decrementer
  * or external interrupt to one of the vcpus.  vc->lock is held.
  */
 static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 {
-	struct kvm_vcpu *vcpu;
+	ktime_t cur, start_poll, start_wait;
 	int do_sleep = 1;
+	u64 block_ns;
 	DECLARE_SWAITQUEUE(wait);
 
-	prepare_to_swait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
+	/* Poll for pending exceptions and ceded state */
+	cur = start_poll = ktime_get();
+	if (vc->halt_poll_ns) {
+		ktime_t stop = ktime_add_ns(start_poll, vc->halt_poll_ns);
+		++vc->runner->stat.halt_attempted_poll;
 
-	/*
-	 * Check one last time for pending exceptions and ceded state after
-	 * we put ourselves on the wait queue
-	 */
-	list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
-		if (vcpu->arch.pending_exceptions || !vcpu->arch.ceded) {
-			do_sleep = 0;
-			break;
+		vc->vcore_state = VCORE_POLLING;
+		spin_unlock(&vc->lock);
+
+		do {
+			if (kvmppc_vcore_check_block(vc)) {
+				do_sleep = 0;
+				break;
+			}
+			cur = ktime_get();
+		} while (single_task_running() && ktime_before(cur, stop));
+
+		spin_lock(&vc->lock);
+		vc->vcore_state = VCORE_INACTIVE;
+
+		if (!do_sleep) {
+			++vc->runner->stat.halt_successful_poll;
+			goto out;
 		}
 	}
 
-	if (!do_sleep) {
+	prepare_to_swait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
+
+	if (kvmppc_vcore_check_block(vc)) {
 		finish_swait(&vc->wq, &wait);
-		return;
+		do_sleep = 0;
+		/* If we polled, count this as a successful poll */
+		if (vc->halt_poll_ns)
+			++vc->runner->stat.halt_successful_poll;
+		goto out;
 	}
 
+	start_wait = ktime_get();
+
 	vc->vcore_state = VCORE_SLEEPING;
 	trace_kvmppc_vcore_blocked(vc, 0);
 	spin_unlock(&vc->lock);
@@ -2640,13 +2630,52 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 	spin_lock(&vc->lock);
 	vc->vcore_state = VCORE_INACTIVE;
 	trace_kvmppc_vcore_blocked(vc, 1);
+	++vc->runner->stat.halt_successful_wait;
+
+	cur = ktime_get();
+
+out:
+	block_ns = ktime_to_ns(cur) - ktime_to_ns(start_poll);
+
+	/* Attribute wait time */
+	if (do_sleep) {
+		vc->runner->stat.halt_wait_ns +=
+			ktime_to_ns(cur) - ktime_to_ns(start_wait);
+		/* Attribute failed poll time */
+		if (vc->halt_poll_ns)
+			vc->runner->stat.halt_poll_fail_ns +=
+				ktime_to_ns(start_wait) -
+				ktime_to_ns(start_poll);
+	} else {
+		/* Attribute successful poll time */
+		if (vc->halt_poll_ns)
+			vc->runner->stat.halt_poll_success_ns +=
+				ktime_to_ns(cur) -
+				ktime_to_ns(start_poll);
+	}
+
+	/* Adjust poll time */
+	if (halt_poll_max_ns) {
+		if (block_ns <= vc->halt_poll_ns)
+			;
+		/* We slept and blocked for longer than the max halt time */
+		else if (vc->halt_poll_ns && block_ns > halt_poll_max_ns)
+			shrink_halt_poll_ns(vc);
+		/* We slept and our poll time is too small */
+		else if (vc->halt_poll_ns < halt_poll_max_ns &&
+				block_ns < halt_poll_max_ns)
+			grow_halt_poll_ns(vc);
+	} else
+		vc->halt_poll_ns = 0;
+
+	trace_kvmppc_vcore_wakeup(do_sleep, block_ns);
 }
 
 static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 {
-	int n_ceded;
+	int n_ceded, i;
 	struct kvmppc_vcore *vc;
-	struct kvm_vcpu *v, *vn;
+	struct kvm_vcpu *v;
 
 	trace_kvmppc_run_vcpu_enter(vcpu);
 
@@ -2666,7 +2695,7 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	vcpu->arch.stolen_logged = vcore_stolen_time(vc, mftb());
 	vcpu->arch.state = KVMPPC_VCPU_RUNNABLE;
 	vcpu->arch.busy_preempt = TB_NIL;
-	list_add_tail(&vcpu->arch.run_list, &vc->runnable_threads);
+	WRITE_ONCE(vc->runnable_threads[vcpu->arch.ptid], vcpu);
 	++vc->n_runnable;
 
 	/*
@@ -2706,8 +2735,7 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 			kvmppc_wait_for_exec(vc, vcpu, TASK_INTERRUPTIBLE);
 			continue;
 		}
-		list_for_each_entry_safe(v, vn, &vc->runnable_threads,
-					 arch.run_list) {
+		for_each_runnable_thread(i, v, vc) {
 			kvmppc_core_prepare_to_enter(v);
 			if (signal_pending(v->arch.run_task)) {
 				kvmppc_remove_runnable(vc, v);
@@ -2720,7 +2748,7 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		if (!vc->n_runnable || vcpu->arch.state != KVMPPC_VCPU_RUNNABLE)
 			break;
 		n_ceded = 0;
-		list_for_each_entry(v, &vc->runnable_threads, arch.run_list) {
+		for_each_runnable_thread(i, v, vc) {
 			if (!v->arch.pending_exceptions)
 				n_ceded += v->arch.ceded;
 			else
@@ -2759,8 +2787,8 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	if (vc->n_runnable && vc->vcore_state == VCORE_INACTIVE) {
 		/* Wake up some vcpu to run the core */
-		v = list_first_entry(&vc->runnable_threads,
-				     struct kvm_vcpu, arch.run_list);
+		i = -1;
+		v = next_runnable_thread(vc, &i);
 		wake_up(&v->arch.cpu_run);
 	}
 
@@ -2818,7 +2846,8 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			r = kvmppc_book3s_hv_page_fault(run, vcpu,
 				vcpu->arch.fault_dar, vcpu->arch.fault_dsisr);
 			srcu_read_unlock(&vcpu->kvm->srcu, srcu_idx);
-		}
+		} else if (r == RESUME_PASSTHROUGH)
+			r = kvmppc_xics_rm_complete(vcpu, 0);
 	} while (is_kvmppc_resume_guest(r));
 
  out:
@@ -3247,6 +3276,8 @@ static void kvmppc_core_destroy_vm_hv(struct kvm *kvm)
 	kvmppc_free_vcores(kvm);
 
 	kvmppc_free_hpt(kvm);
+
+	kvmppc_free_pimap(kvm);
 }
 
 /* We don't need to emulate any privileged instructions or dcbz */
@@ -3282,6 +3313,184 @@ static int kvmppc_core_check_processor_compat_hv(void)
 	return 0;
 }
 
+#ifdef CONFIG_KVM_XICS
+
+void kvmppc_free_pimap(struct kvm *kvm)
+{
+	kfree(kvm->arch.pimap);
+}
+
+static struct kvmppc_passthru_irqmap *kvmppc_alloc_pimap(void)
+{
+	return kzalloc(sizeof(struct kvmppc_passthru_irqmap), GFP_KERNEL);
+}
+
+static int kvmppc_set_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
+{
+	struct irq_desc *desc;
+	struct kvmppc_irq_map *irq_map;
+	struct kvmppc_passthru_irqmap *pimap;
+	struct irq_chip *chip;
+	int i;
+
+	if (!kvm_irq_bypass)
+		return 1;
+
+	desc = irq_to_desc(host_irq);
+	if (!desc)
+		return -EIO;
+
+	mutex_lock(&kvm->lock);
+
+	pimap = kvm->arch.pimap;
+	if (pimap == NULL) {
+		/* First call, allocate structure to hold IRQ map */
+		pimap = kvmppc_alloc_pimap();
+		if (pimap == NULL) {
+			mutex_unlock(&kvm->lock);
+			return -ENOMEM;
+		}
+		kvm->arch.pimap = pimap;
+	}
+
+	/*
+	 * For now, we only support interrupts for which the EOI operation
+	 * is an OPAL call followed by a write to XIRR, since that's
+	 * what our real-mode EOI code does.
+	 */
+	chip = irq_data_get_irq_chip(&desc->irq_data);
+	if (!chip || !is_pnv_opal_msi(chip)) {
+		pr_warn("kvmppc_set_passthru_irq_hv: Could not assign IRQ map for (%d,%d)\n",
+			host_irq, guest_gsi);
+		mutex_unlock(&kvm->lock);
+		return -ENOENT;
+	}
+
+	/*
+	 * See if we already have an entry for this guest IRQ number.
+	 * If it's mapped to a hardware IRQ number, that's an error,
+	 * otherwise re-use this entry.
+	 */
+	for (i = 0; i < pimap->n_mapped; i++) {
+		if (guest_gsi == pimap->mapped[i].v_hwirq) {
+			if (pimap->mapped[i].r_hwirq) {
+				mutex_unlock(&kvm->lock);
+				return -EINVAL;
+			}
+			break;
+		}
+	}
+
+	if (i == KVMPPC_PIRQ_MAPPED) {
+		mutex_unlock(&kvm->lock);
+		return -EAGAIN;		/* table is full */
+	}
+
+	irq_map = &pimap->mapped[i];
+
+	irq_map->v_hwirq = guest_gsi;
+	irq_map->desc = desc;
+
+	/*
+	 * Order the above two stores before the next to serialize with
+	 * the KVM real mode handler.
+	 */
+	smp_wmb();
+	irq_map->r_hwirq = desc->irq_data.hwirq;
+
+	if (i == pimap->n_mapped)
+		pimap->n_mapped++;
+
+	kvmppc_xics_set_mapped(kvm, guest_gsi, desc->irq_data.hwirq);
+
+	mutex_unlock(&kvm->lock);
+
+	return 0;
+}
+
+static int kvmppc_clr_passthru_irq(struct kvm *kvm, int host_irq, int guest_gsi)
+{
+	struct irq_desc *desc;
+	struct kvmppc_passthru_irqmap *pimap;
+	int i;
+
+	if (!kvm_irq_bypass)
+		return 0;
+
+	desc = irq_to_desc(host_irq);
+	if (!desc)
+		return -EIO;
+
+	mutex_lock(&kvm->lock);
+
+	if (kvm->arch.pimap == NULL) {
+		mutex_unlock(&kvm->lock);
+		return 0;
+	}
+	pimap = kvm->arch.pimap;
+
+	for (i = 0; i < pimap->n_mapped; i++) {
+		if (guest_gsi == pimap->mapped[i].v_hwirq)
+			break;
+	}
+
+	if (i == pimap->n_mapped) {
+		mutex_unlock(&kvm->lock);
+		return -ENODEV;
+	}
+
+	kvmppc_xics_clr_mapped(kvm, guest_gsi, pimap->mapped[i].r_hwirq);
+
+	/* invalidate the entry */
+	pimap->mapped[i].r_hwirq = 0;
+
+	/*
+	 * We don't free this structure even when the count goes to
+	 * zero. The structure is freed when we destroy the VM.
+	 */
+
+	mutex_unlock(&kvm->lock);
+	return 0;
+}
+
+static int kvmppc_irq_bypass_add_producer_hv(struct irq_bypass_consumer *cons,
+					     struct irq_bypass_producer *prod)
+{
+	int ret = 0;
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+	irqfd->producer = prod;
+
+	ret = kvmppc_set_passthru_irq(irqfd->kvm, prod->irq, irqfd->gsi);
+	if (ret)
+		pr_info("kvmppc_set_passthru_irq (irq %d, gsi %d) fails: %d\n",
+			prod->irq, irqfd->gsi, ret);
+
+	return ret;
+}
+
+static void kvmppc_irq_bypass_del_producer_hv(struct irq_bypass_consumer *cons,
+					      struct irq_bypass_producer *prod)
+{
+	int ret;
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+	irqfd->producer = NULL;
+
+	/*
+	 * When producer of consumer is unregistered, we change back to
+	 * default external interrupt handling mode - KVM real mode
+	 * will switch back to host.
+	 */
+	ret = kvmppc_clr_passthru_irq(irqfd->kvm, prod->irq, irqfd->gsi);
+	if (ret)
+		pr_warn("kvmppc_clr_passthru_irq (irq %d, gsi %d) fails: %d\n",
+			prod->irq, irqfd->gsi, ret);
+}
+#endif
+
 static long kvm_arch_vm_ioctl_hv(struct file *filp,
 				 unsigned int ioctl, unsigned long arg)
 {
@@ -3400,6 +3609,10 @@ static struct kvmppc_ops kvm_ops_hv = {
 	.fast_vcpu_kick = kvmppc_fast_vcpu_kick_hv,
 	.arch_vm_ioctl  = kvm_arch_vm_ioctl_hv,
 	.hcall_implemented = kvmppc_hcall_impl_hv,
+#ifdef CONFIG_KVM_XICS
+	.irq_bypass_add_producer = kvmppc_irq_bypass_add_producer_hv,
+	.irq_bypass_del_producer = kvmppc_irq_bypass_del_producer_hv,
+#endif
 };
 
 static int kvm_init_subcore_bitmap(void)
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index 5f0380d..0c84d6b 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -25,6 +25,7 @@
 #include <asm/xics.h>
 #include <asm/dbell.h>
 #include <asm/cputhreads.h>
+#include <asm/io.h>
 
 #define KVM_CMA_CHUNK_ORDER	18
 
@@ -286,3 +287,158 @@ void kvmhv_commence_exit(int trap)
 
 struct kvmppc_host_rm_ops *kvmppc_host_rm_ops_hv;
 EXPORT_SYMBOL_GPL(kvmppc_host_rm_ops_hv);
+
+#ifdef CONFIG_KVM_XICS
+static struct kvmppc_irq_map *get_irqmap(struct kvmppc_passthru_irqmap *pimap,
+					 u32 xisr)
+{
+	int i;
+
+	/*
+	 * We access the mapped array here without a lock.  That
+	 * is safe because we never reduce the number of entries
+	 * in the array and we never change the v_hwirq field of
+	 * an entry once it is set.
+	 *
+	 * We have also carefully ordered the stores in the writer
+	 * and the loads here in the reader, so that if we find a matching
+	 * hwirq here, the associated GSI and irq_desc fields are valid.
+	 */
+	for (i = 0; i < pimap->n_mapped; i++)  {
+		if (xisr == pimap->mapped[i].r_hwirq) {
+			/*
+			 * Order subsequent reads in the caller to serialize
+			 * with the writer.
+			 */
+			smp_rmb();
+			return &pimap->mapped[i];
+		}
+	}
+	return NULL;
+}
+
+/*
+ * If we have an interrupt that's not an IPI, check if we have a
+ * passthrough adapter and if so, check if this external interrupt
+ * is for the adapter.
+ * We will attempt to deliver the IRQ directly to the target VCPU's
+ * ICP, the virtual ICP (based on affinity - the xive value in ICS).
+ *
+ * If the delivery fails or if this is not for a passthrough adapter,
+ * return to the host to handle this interrupt. We earlier
+ * saved a copy of the XIRR in the PACA, it will be picked up by
+ * the host ICP driver.
+ */
+static int kvmppc_check_passthru(u32 xisr, __be32 xirr)
+{
+	struct kvmppc_passthru_irqmap *pimap;
+	struct kvmppc_irq_map *irq_map;
+	struct kvm_vcpu *vcpu;
+
+	vcpu = local_paca->kvm_hstate.kvm_vcpu;
+	if (!vcpu)
+		return 1;
+	pimap = kvmppc_get_passthru_irqmap(vcpu->kvm);
+	if (!pimap)
+		return 1;
+	irq_map = get_irqmap(pimap, xisr);
+	if (!irq_map)
+		return 1;
+
+	/* We're handling this interrupt, generic code doesn't need to */
+	local_paca->kvm_hstate.saved_xirr = 0;
+
+	return kvmppc_deliver_irq_passthru(vcpu, xirr, irq_map, pimap);
+}
+
+#else
+static inline int kvmppc_check_passthru(u32 xisr, __be32 xirr)
+{
+	return 1;
+}
+#endif
+
+/*
+ * Determine what sort of external interrupt is pending (if any).
+ * Returns:
+ *	0 if no interrupt is pending
+ *	1 if an interrupt is pending that needs to be handled by the host
+ *	2 Passthrough that needs completion in the host
+ *	-1 if there was a guest wakeup IPI (which has now been cleared)
+ *	-2 if there is PCI passthrough external interrupt that was handled
+ */
+
+long kvmppc_read_intr(void)
+{
+	unsigned long xics_phys;
+	u32 h_xirr;
+	__be32 xirr;
+	u32 xisr;
+	u8 host_ipi;
+
+	/* see if a host IPI is pending */
+	host_ipi = local_paca->kvm_hstate.host_ipi;
+	if (host_ipi)
+		return 1;
+
+	/* Now read the interrupt from the ICP */
+	xics_phys = local_paca->kvm_hstate.xics_phys;
+	if (unlikely(!xics_phys))
+		return 1;
+
+	/*
+	 * Save XIRR for later. Since we get control in reverse endian
+	 * on LE systems, save it byte reversed and fetch it back in
+	 * host endian. Note that xirr is the value read from the
+	 * XIRR register, while h_xirr is the host endian version.
+	 */
+	xirr = _lwzcix(xics_phys + XICS_XIRR);
+	h_xirr = be32_to_cpu(xirr);
+	local_paca->kvm_hstate.saved_xirr = h_xirr;
+	xisr = h_xirr & 0xffffff;
+	/*
+	 * Ensure that the store/load complete to guarantee all side
+	 * effects of loading from XIRR has completed
+	 */
+	smp_mb();
+
+	/* if nothing pending in the ICP */
+	if (!xisr)
+		return 0;
+
+	/* We found something in the ICP...
+	 *
+	 * If it is an IPI, clear the MFRR and EOI it.
+	 */
+	if (xisr == XICS_IPI) {
+		_stbcix(xics_phys + XICS_MFRR, 0xff);
+		_stwcix(xics_phys + XICS_XIRR, xirr);
+		/*
+		 * Need to ensure side effects of above stores
+		 * complete before proceeding.
+		 */
+		smp_mb();
+
+		/*
+		 * We need to re-check host IPI now in case it got set in the
+		 * meantime. If it's clear, we bounce the interrupt to the
+		 * guest
+		 */
+		host_ipi = local_paca->kvm_hstate.host_ipi;
+		if (unlikely(host_ipi != 0)) {
+			/* We raced with the host,
+			 * we need to resend that IPI, bummer
+			 */
+			_stbcix(xics_phys + XICS_MFRR, IPI_PRIORITY);
+			/* Let side effects complete */
+			smp_mb();
+			return 1;
+		}
+
+		/* OK, it's an IPI for us */
+		local_paca->kvm_hstate.saved_xirr = 0;
+		return -1;
+	}
+
+	return kvmppc_check_passthru(xisr, xirr);
+}
diff --git a/arch/powerpc/kvm/book3s_hv_rm_xics.c b/arch/powerpc/kvm/book3s_hv_rm_xics.c
index 980d8a6..82ff5de 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_xics.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_xics.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/kvm_host.h>
 #include <linux/err.h>
+#include <linux/kernel_stat.h>
 
 #include <asm/kvm_book3s.h>
 #include <asm/kvm_ppc.h>
@@ -18,7 +19,10 @@
 #include <asm/debug.h>
 #include <asm/synch.h>
 #include <asm/cputhreads.h>
+#include <asm/pgtable.h>
 #include <asm/ppc-opcode.h>
+#include <asm/pnv-pci.h>
+#include <asm/opal.h>
 
 #include "book3s_xics.h"
 
@@ -26,9 +30,12 @@
 
 int h_ipi_redirect = 1;
 EXPORT_SYMBOL(h_ipi_redirect);
+int kvm_irq_bypass = 1;
+EXPORT_SYMBOL(kvm_irq_bypass);
 
 static void icp_rm_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp,
 			    u32 new_irq);
+static int xics_opal_rm_set_server(unsigned int hw_irq, int server_cpu);
 
 /* -- ICS routines -- */
 static void ics_rm_check_resend(struct kvmppc_xics *xics,
@@ -708,10 +715,123 @@ int kvmppc_rm_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr)
 		icp->rm_action |= XICS_RM_NOTIFY_EOI;
 		icp->rm_eoied_irq = irq;
 	}
+
+	if (state->host_irq) {
+		++vcpu->stat.pthru_all;
+		if (state->intr_cpu != -1) {
+			int pcpu = raw_smp_processor_id();
+
+			pcpu = cpu_first_thread_sibling(pcpu);
+			++vcpu->stat.pthru_host;
+			if (state->intr_cpu != pcpu) {
+				++vcpu->stat.pthru_bad_aff;
+				xics_opal_rm_set_server(state->host_irq, pcpu);
+			}
+			state->intr_cpu = -1;
+		}
+	}
  bail:
 	return check_too_hard(xics, icp);
 }
 
+unsigned long eoi_rc;
+
+static void icp_eoi(struct irq_chip *c, u32 hwirq, u32 xirr)
+{
+	unsigned long xics_phys;
+	int64_t rc;
+
+	rc = pnv_opal_pci_msi_eoi(c, hwirq);
+
+	if (rc)
+		eoi_rc = rc;
+
+	iosync();
+
+	/* EOI it */
+	xics_phys = local_paca->kvm_hstate.xics_phys;
+	_stwcix(xics_phys + XICS_XIRR, xirr);
+}
+
+static int xics_opal_rm_set_server(unsigned int hw_irq, int server_cpu)
+{
+	unsigned int mangle_cpu = get_hard_smp_processor_id(server_cpu) << 2;
+
+	return opal_rm_set_xive(hw_irq, mangle_cpu, DEFAULT_PRIORITY);
+}
+
+/*
+ * Increment a per-CPU 32-bit unsigned integer variable.
+ * Safe to call in real-mode. Handles vmalloc'ed addresses
+ *
+ * ToDo: Make this work for any integral type
+ */
+
+static inline void this_cpu_inc_rm(unsigned int __percpu *addr)
+{
+	unsigned long l;
+	unsigned int *raddr;
+	int cpu = smp_processor_id();
+
+	raddr = per_cpu_ptr(addr, cpu);
+	l = (unsigned long)raddr;
+
+	if (REGION_ID(l) == VMALLOC_REGION_ID) {
+		l = vmalloc_to_phys(raddr);
+		raddr = (unsigned int *)l;
+	}
+	++*raddr;
+}
+
+/*
+ * We don't try to update the flags in the irq_desc 'istate' field in
+ * here as would happen in the normal IRQ handling path for several reasons:
+ *  - state flags represent internal IRQ state and are not expected to be
+ *    updated outside the IRQ subsystem
+ *  - more importantly, these are useful for edge triggered interrupts,
+ *    IRQ probing, etc., but we are only handling MSI/MSIx interrupts here
+ *    and these states shouldn't apply to us.
+ *
+ * However, we do update irq_stats - we somewhat duplicate the code in
+ * kstat_incr_irqs_this_cpu() for this since this function is defined
+ * in irq/internal.h which we don't want to include here.
+ * The only difference is that desc->kstat_irqs is an allocated per CPU
+ * variable and could have been vmalloc'ed, so we can't directly
+ * call __this_cpu_inc() on it. The kstat structure is a static
+ * per CPU variable and it should be accessible by real-mode KVM.
+ *
+ */
+static void kvmppc_rm_handle_irq_desc(struct irq_desc *desc)
+{
+	this_cpu_inc_rm(desc->kstat_irqs);
+	__this_cpu_inc(kstat.irqs_sum);
+}
+
+long kvmppc_deliver_irq_passthru(struct kvm_vcpu *vcpu,
+				 u32 xirr,
+				 struct kvmppc_irq_map *irq_map,
+				 struct kvmppc_passthru_irqmap *pimap)
+{
+	struct kvmppc_xics *xics;
+	struct kvmppc_icp *icp;
+	u32 irq;
+
+	irq = irq_map->v_hwirq;
+	xics = vcpu->kvm->arch.xics;
+	icp = vcpu->arch.icp;
+
+	kvmppc_rm_handle_irq_desc(irq_map->desc);
+	icp_rm_deliver_irq(xics, icp, irq);
+
+	/* EOI the interrupt */
+	icp_eoi(irq_desc_get_chip(irq_map->desc), irq_map->r_hwirq, xirr);
+
+	if (check_too_hard(xics, icp) == H_TOO_HARD)
+		return 2;
+	else
+		return -2;
+}
+
 /*  --- Non-real mode XICS-related built-in routines ---  */
 
 /**
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 9756555..c3c1d1b 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -221,6 +221,13 @@ kvmppc_primary_no_guest:
 	li	r3, 0		/* Don't wake on privileged (OS) doorbell */
 	b	kvm_do_nap
 
+/*
+ * kvm_novcpu_wakeup
+ *	Entered from kvm_start_guest if kvm_hstate.napping is set
+ *	to NAPPING_NOVCPU
+ *		r2 = kernel TOC
+ *		r13 = paca
+ */
 kvm_novcpu_wakeup:
 	ld	r1, HSTATE_HOST_R1(r13)
 	ld	r5, HSTATE_KVM_VCORE(r13)
@@ -230,6 +237,13 @@ kvm_novcpu_wakeup:
 	/* check the wake reason */
 	bl	kvmppc_check_wake_reason
 
+	/*
+	 * Restore volatile registers since we could have called
+	 * a C routine in kvmppc_check_wake_reason.
+	 *	r5 = VCORE
+	 */
+	ld	r5, HSTATE_KVM_VCORE(r13)
+
 	/* see if any other thread is already exiting */
 	lwz	r0, VCORE_ENTRY_EXIT(r5)
 	cmpwi	r0, 0x100
@@ -322,6 +336,11 @@ kvm_start_guest:
 
 	/* Check the wake reason in SRR1 to see why we got here */
 	bl	kvmppc_check_wake_reason
+	/*
+	 * kvmppc_check_wake_reason could invoke a C routine, but we
+	 * have no volatile registers to restore when we return.
+	 */
+
 	cmpdi	r3, 0
 	bge	kvm_no_guest
 
@@ -625,9 +644,11 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_207S)
 38:
 
 BEGIN_FTR_SECTION
-	/* DPDES is shared between threads */
+	/* DPDES and VTB are shared between threads */
 	ld	r8, VCORE_DPDES(r5)
+	ld	r7, VCORE_VTB(r5)
 	mtspr	SPRN_DPDES, r8
+	mtspr	SPRN_VTB, r7
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 
 	/* Mark the subcore state as inside guest */
@@ -787,10 +808,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	mtspr	SPRN_CIABR, r7
 	mtspr	SPRN_TAR, r8
 	ld	r5, VCPU_IC(r4)
-	ld	r6, VCPU_VTB(r4)
-	mtspr	SPRN_IC, r5
-	mtspr	SPRN_VTB, r6
 	ld	r8, VCPU_EBBHR(r4)
+	mtspr	SPRN_IC, r5
 	mtspr	SPRN_EBBHR, r8
 	ld	r5, VCPU_EBBRR(r4)
 	ld	r6, VCPU_BESCR(r4)
@@ -881,6 +900,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	cmpwi	r3, 512		/* 1 microsecond */
 	blt	hdec_soon
 
+deliver_guest_interrupt:
 	ld	r6, VCPU_CTR(r4)
 	ld	r7, VCPU_XER(r4)
 
@@ -895,7 +915,6 @@ kvmppc_cede_reentry:		/* r4 = vcpu, r13 = paca */
 	mtspr	SPRN_SRR0, r6
 	mtspr	SPRN_SRR1, r7
 
-deliver_guest_interrupt:
 	/* r11 = vcpu->arch.msr & ~MSR_HV */
 	rldicl	r11, r11, 63 - MSR_HV_LG, 1
 	rotldi	r11, r11, 1 + MSR_HV_LG
@@ -1155,10 +1174,54 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 	 * set, we know the host wants us out so let's do it now
 	 */
 	bl	kvmppc_read_intr
+
+	/*
+	 * Restore the active volatile registers after returning from
+	 * a C function.
+	 */
+	ld	r9, HSTATE_KVM_VCPU(r13)
+	li	r12, BOOK3S_INTERRUPT_EXTERNAL
+
+	/*
+	 * kvmppc_read_intr return codes:
+	 *
+	 * Exit to host (r3 > 0)
+	 *   1 An interrupt is pending that needs to be handled by the host
+	 *     Exit guest and return to host by branching to guest_exit_cont
+	 *
+	 *   2 Passthrough that needs completion in the host
+	 *     Exit guest and return to host by branching to guest_exit_cont
+	 *     However, we also set r12 to BOOK3S_INTERRUPT_HV_RM_HARD
+	 *     to indicate to the host to complete handling the interrupt
+	 *
+	 * Before returning to guest, we check if any CPU is heading out
+	 * to the host and if so, we head out also. If no CPUs are heading
+	 * check return values <= 0.
+	 *
+	 * Return to guest (r3 <= 0)
+	 *  0 No external interrupt is pending
+	 * -1 A guest wakeup IPI (which has now been cleared)
+	 *    In either case, we return to guest to deliver any pending
+	 *    guest interrupts.
+	 *
+	 * -2 A PCI passthrough external interrupt was handled
+	 *    (interrupt was delivered directly to guest)
+	 *    Return to guest to deliver any pending guest interrupts.
+	 */
+
+	cmpdi	r3, 1
+	ble	1f
+
+	/* Return code = 2 */
+	li	r12, BOOK3S_INTERRUPT_HV_RM_HARD
+	stw	r12, VCPU_TRAP(r9)
+	b	guest_exit_cont
+
+1:	/* Return code <= 1 */
 	cmpdi	r3, 0
 	bgt	guest_exit_cont
 
-	/* Check if any CPU is heading out to the host, if so head out too */
+	/* Return code <= 0 */
 4:	ld	r5, HSTATE_KVM_VCORE(r13)
 	lwz	r0, VCORE_ENTRY_EXIT(r5)
 	cmpwi	r0, 0x100
@@ -1271,10 +1334,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	stw	r6, VCPU_PSPB(r9)
 	std	r7, VCPU_FSCR(r9)
 	mfspr	r5, SPRN_IC
-	mfspr	r6, SPRN_VTB
 	mfspr	r7, SPRN_TAR
 	std	r5, VCPU_IC(r9)
-	std	r6, VCPU_VTB(r9)
 	std	r7, VCPU_TAR(r9)
 	mfspr	r8, SPRN_EBBHR
 	std	r8, VCPU_EBBHR(r9)
@@ -1501,9 +1562,11 @@ kvmhv_switch_to_host:
 	isync
 
 BEGIN_FTR_SECTION
-	/* DPDES is shared between threads */
+	/* DPDES and VTB are shared between threads */
 	mfspr	r7, SPRN_DPDES
+	mfspr	r8, SPRN_VTB
 	std	r7, VCORE_DPDES(r5)
+	std	r8, VCORE_VTB(r5)
 	/* clear DPDES so we don't get guest doorbells in the host */
 	li	r8, 0
 	mtspr	SPRN_DPDES, r8
@@ -2213,10 +2276,20 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
 	ld	r29, VCPU_GPR(R29)(r4)
 	ld	r30, VCPU_GPR(R30)(r4)
 	ld	r31, VCPU_GPR(R31)(r4)
- 
+
 	/* Check the wake reason in SRR1 to see why we got here */
 	bl	kvmppc_check_wake_reason
 
+	/*
+	 * Restore volatile registers since we could have called a
+	 * C routine in kvmppc_check_wake_reason
+	 *	r4 = VCPU
+	 * r3 tells us whether we need to return to host or not
+	 * WARNING: it gets checked further down:
+	 * should not modify r3 until this check is done.
+	 */
+	ld	r4, HSTATE_KVM_VCPU(r13)
+
 	/* clear our bit in vcore->napping_threads */
 34:	ld	r5,HSTATE_KVM_VCORE(r13)
 	lbz	r7,HSTATE_PTID(r13)
@@ -2230,7 +2303,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
 	li	r0,0
 	stb	r0,HSTATE_NAPPING(r13)
 
-	/* See if the wake reason means we need to exit */
+	/* See if the wake reason saved in r3 means we need to exit */
 	stw	r12, VCPU_TRAP(r4)
 	mr	r9, r4
 	cmpdi	r3, 0
@@ -2297,10 +2370,14 @@ machine_check_realmode:
  *	0 if nothing needs to be done
  *	1 if something happened that needs to be handled by the host
  *	-1 if there was a guest wakeup (IPI or msgsnd)
+ *	-2 if we handled a PCI passthrough interrupt (returned by
+ *		kvmppc_read_intr only)
  *
  * Also sets r12 to the interrupt vector for any interrupt that needs
  * to be handled now by the host (0x500 for external interrupt), or zero.
- * Modifies r0, r6, r7, r8.
+ * Modifies all volatile registers (since it may call a C function).
+ * This routine calls kvmppc_read_intr, a C function, if an external
+ * interrupt is pending.
  */
 kvmppc_check_wake_reason:
 	mfspr	r6, SPRN_SRR1
@@ -2310,8 +2387,7 @@ FTR_SECTION_ELSE
 	rlwinm	r6, r6, 45-31, 0xe	/* P7 wake reason field is 3 bits */
 ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_207S)
 	cmpwi	r6, 8			/* was it an external interrupt? */
-	li	r12, BOOK3S_INTERRUPT_EXTERNAL
-	beq	kvmppc_read_intr	/* if so, see what it was */
+	beq	7f			/* if so, see what it was */
 	li	r3, 0
 	li	r12, 0
 	cmpwi	r6, 6			/* was it the decrementer? */
@@ -2350,83 +2426,28 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	li	r3, 1
 	blr
 
-/*
- * Determine what sort of external interrupt is pending (if any).
- * Returns:
- *	0 if no interrupt is pending
- *	1 if an interrupt is pending that needs to be handled by the host
- *	-1 if there was a guest wakeup IPI (which has now been cleared)
- * Modifies r0, r6, r7, r8, returns value in r3.
- */
-kvmppc_read_intr:
-	/* see if a host IPI is pending */
-	li	r3, 1
-	lbz	r0, HSTATE_HOST_IPI(r13)
-	cmpwi	r0, 0
-	bne	1f
+	/* external interrupt - create a stack frame so we can call C */
+7:	mflr	r0
+	std	r0, PPC_LR_STKOFF(r1)
+	stdu	r1, -PPC_MIN_STKFRM(r1)
+	bl	kvmppc_read_intr
+	nop
+	li	r12, BOOK3S_INTERRUPT_EXTERNAL
+	cmpdi	r3, 1
+	ble	1f
 
-	/* Now read the interrupt from the ICP */
-	ld	r6, HSTATE_XICS_PHYS(r13)
-	li	r7, XICS_XIRR
-	cmpdi	r6, 0
-	beq-	1f
-	lwzcix	r0, r6, r7
 	/*
-	 * Save XIRR for later. Since we get in in reverse endian on LE
-	 * systems, save it byte reversed and fetch it back in host endian.
-	 */
-	li	r3, HSTATE_SAVED_XIRR
-	STWX_BE	r0, r3, r13
-#ifdef __LITTLE_ENDIAN__
-	lwz	r3, HSTATE_SAVED_XIRR(r13)
-#else
-	mr	r3, r0
-#endif
-	rlwinm.	r3, r3, 0, 0xffffff
-	sync
-	beq	1f			/* if nothing pending in the ICP */
-
-	/* We found something in the ICP...
-	 *
-	 * If it's not an IPI, stash it in the PACA and return to
-	 * the host, we don't (yet) handle directing real external
-	 * interrupts directly to the guest
+	 * Return code of 2 means PCI passthrough interrupt, but
+	 * we need to return back to host to complete handling the
+	 * interrupt. Trap reason is expected in r12 by guest
+	 * exit code.
 	 */
-	cmpwi	r3, XICS_IPI		/* if there is, is it an IPI? */
-	bne	42f
-
-	/* It's an IPI, clear the MFRR and EOI it */
-	li	r3, 0xff
-	li	r8, XICS_MFRR
-	stbcix	r3, r6, r8		/* clear the IPI */
-	stwcix	r0, r6, r7		/* EOI it */
-	sync
-
-	/* We need to re-check host IPI now in case it got set in the
-	 * meantime. If it's clear, we bounce the interrupt to the
-	 * guest
-	 */
-	lbz	r0, HSTATE_HOST_IPI(r13)
-	cmpwi	r0, 0
-	bne-	43f
-
-	/* OK, it's an IPI for us */
-	li	r12, 0
-	li	r3, -1
-1:	blr
-
-42:	/* It's not an IPI and it's for the host. We saved a copy of XIRR in
-	 * the PACA earlier, it will be picked up by the host ICP driver
-	 */
-	li	r3, 1
-	b	1b
-
-43:	/* We raced with the host, we need to resend that IPI, bummer */
-	li	r0, IPI_PRIORITY
-	stbcix	r0, r6, r8		/* set the IPI */
-	sync
-	li	r3, 1
-	b	1b
+	li	r12, BOOK3S_INTERRUPT_HV_RM_HARD
+1:
+	ld	r0, PPC_MIN_STKFRM+PPC_LR_STKOFF(r1)
+	addi	r1, r1, PPC_MIN_STKFRM
+	mtlr	r0
+	blr
 
 /*
  * Save away FP, VMX and VSX registers.
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index e76f79a..826c541 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -226,7 +226,7 @@ void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu,
 	 */
 	vcpu->arch.purr += get_tb() - vcpu->arch.entry_tb;
 	vcpu->arch.spurr += get_tb() - vcpu->arch.entry_tb;
-	vcpu->arch.vtb += get_vtb() - vcpu->arch.entry_vtb;
+	to_book3s(vcpu)->vtb += get_vtb() - vcpu->arch.entry_vtb;
 	if (cpu_has_feature(CPU_FTR_ARCH_207S))
 		vcpu->arch.ic += mfspr(SPRN_IC) - vcpu->arch.entry_ic;
 	svcpu->in_use = false;
@@ -448,6 +448,8 @@ void kvmppc_set_pvr_pr(struct kvm_vcpu *vcpu, u32 pvr)
 	case PVR_POWER7:
 	case PVR_POWER7p:
 	case PVR_POWER8:
+	case PVR_POWER8E:
+	case PVR_POWER8NVL:
 		vcpu->arch.hflags |= BOOK3S_HFLAG_MULTI_PGSIZE |
 			BOOK3S_HFLAG_NEW_TLBIE;
 		break;
@@ -1361,6 +1363,9 @@ static int kvmppc_get_one_reg_pr(struct kvm_vcpu *vcpu, u64 id,
 	case KVM_REG_PPC_HIOR:
 		*val = get_reg_val(id, to_book3s(vcpu)->hior);
 		break;
+	case KVM_REG_PPC_VTB:
+		*val = get_reg_val(id, to_book3s(vcpu)->vtb);
+		break;
 	case KVM_REG_PPC_LPCR:
 	case KVM_REG_PPC_LPCR_64:
 		/*
@@ -1397,6 +1402,9 @@ static int kvmppc_set_one_reg_pr(struct kvm_vcpu *vcpu, u64 id,
 		to_book3s(vcpu)->hior = set_reg_val(id, *val);
 		to_book3s(vcpu)->hior_explicit = true;
 		break;
+	case KVM_REG_PPC_VTB:
+		to_book3s(vcpu)->vtb = set_reg_val(id, *val);
+		break;
 	case KVM_REG_PPC_LPCR:
 	case KVM_REG_PPC_LPCR_64:
 		kvmppc_set_lpcr_pr(vcpu, set_reg_val(id, *val));
diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c
index 05aa113..3bdc639 100644
--- a/arch/powerpc/kvm/book3s_xics.c
+++ b/arch/powerpc/kvm/book3s_xics.c
@@ -99,6 +99,10 @@ static int ics_deliver_irq(struct kvmppc_xics *xics, u32 irq, u32 level)
 		return 0;
 	}
 
+	/* Record which CPU this arrived on for passed-through interrupts */
+	if (state->host_irq)
+		state->intr_cpu = raw_smp_processor_id();
+
 	/* Attempt delivery */
 	icp_deliver_irq(xics, NULL, irq);
 
@@ -812,7 +816,7 @@ static noinline int kvmppc_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr)
 	return H_SUCCESS;
 }
 
-static noinline int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall)
+int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall)
 {
 	struct kvmppc_xics *xics = vcpu->kvm->arch.xics;
 	struct kvmppc_icp *icp = vcpu->arch.icp;
@@ -841,6 +845,7 @@ static noinline int kvmppc_xics_rm_complete(struct kvm_vcpu *vcpu, u32 hcall)
 
 	return H_SUCCESS;
 }
+EXPORT_SYMBOL_GPL(kvmppc_xics_rm_complete);
 
 int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 req)
 {
@@ -892,6 +897,21 @@ EXPORT_SYMBOL_GPL(kvmppc_xics_hcall);
 
 /* -- Initialisation code etc. -- */
 
+static void xics_debugfs_irqmap(struct seq_file *m,
+				struct kvmppc_passthru_irqmap *pimap)
+{
+	int i;
+
+	if (!pimap)
+		return;
+	seq_printf(m, "========\nPIRQ mappings: %d maps\n===========\n",
+				pimap->n_mapped);
+	for (i = 0; i < pimap->n_mapped; i++)  {
+		seq_printf(m, "r_hwirq=%x, v_hwirq=%x\n",
+			pimap->mapped[i].r_hwirq, pimap->mapped[i].v_hwirq);
+	}
+}
+
 static int xics_debug_show(struct seq_file *m, void *private)
 {
 	struct kvmppc_xics *xics = m->private;
@@ -913,6 +933,8 @@ static int xics_debug_show(struct seq_file *m, void *private)
 	t_check_resend = 0;
 	t_reject = 0;
 
+	xics_debugfs_irqmap(m, kvm->arch.pimap);
+
 	seq_printf(m, "=========\nICP state\n=========\n");
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
@@ -1252,6 +1274,8 @@ int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level,
 {
 	struct kvmppc_xics *xics = kvm->arch.xics;
 
+	if (!xics)
+		return -ENODEV;
 	return ics_deliver_irq(xics, irq, level);
 }
 
@@ -1418,3 +1442,34 @@ int kvm_irq_map_chip_pin(struct kvm *kvm, unsigned irqchip, unsigned pin)
 {
 	return pin;
 }
+
+void kvmppc_xics_set_mapped(struct kvm *kvm, unsigned long irq,
+			    unsigned long host_irq)
+{
+	struct kvmppc_xics *xics = kvm->arch.xics;
+	struct kvmppc_ics *ics;
+	u16 idx;
+
+	ics = kvmppc_xics_find_ics(xics, irq, &idx);
+	if (!ics)
+		return;
+
+	ics->irq_state[idx].host_irq = host_irq;
+	ics->irq_state[idx].intr_cpu = -1;
+}
+EXPORT_SYMBOL_GPL(kvmppc_xics_set_mapped);
+
+void kvmppc_xics_clr_mapped(struct kvm *kvm, unsigned long irq,
+			    unsigned long host_irq)
+{
+	struct kvmppc_xics *xics = kvm->arch.xics;
+	struct kvmppc_ics *ics;
+	u16 idx;
+
+	ics = kvmppc_xics_find_ics(xics, irq, &idx);
+	if (!ics)
+		return;
+
+	ics->irq_state[idx].host_irq = 0;
+}
+EXPORT_SYMBOL_GPL(kvmppc_xics_clr_mapped);
diff --git a/arch/powerpc/kvm/book3s_xics.h b/arch/powerpc/kvm/book3s_xics.h
index a46b954..2a50320 100644
--- a/arch/powerpc/kvm/book3s_xics.h
+++ b/arch/powerpc/kvm/book3s_xics.h
@@ -42,6 +42,8 @@ struct ics_irq_state {
 	u8  lsi;		/* level-sensitive interrupt */
 	u8  asserted; /* Only for LSI */
 	u8  exists;
+	int intr_cpu;
+	u32 host_irq;
 };
 
 /* Atomic ICP state, updated with a single compare & swap */
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 02b4672..df3f270 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -2038,7 +2038,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 		if (type == KVMPPC_DEBUG_NONE)
 			continue;
 
-		if (type & !(KVMPPC_DEBUG_WATCH_READ |
+		if (type & ~(KVMPPC_DEBUG_WATCH_READ |
 			     KVMPPC_DEBUG_WATCH_WRITE |
 			     KVMPPC_DEBUG_BREAKPOINT))
 			return -EINVAL;
diff --git a/arch/powerpc/kvm/e500_mmu.c b/arch/powerpc/kvm/e500_mmu.c
index 29911a0..ddbf8f0 100644
--- a/arch/powerpc/kvm/e500_mmu.c
+++ b/arch/powerpc/kvm/e500_mmu.c
@@ -743,7 +743,7 @@ int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu,
 	char *virt;
 	struct page **pages;
 	struct tlbe_priv *privs[2] = {};
-	u64 *g2h_bitmap = NULL;
+	u64 *g2h_bitmap;
 	size_t array_len;
 	u32 sets;
 	int num_pages, ret, i;
@@ -779,41 +779,44 @@ int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu,
 
 	num_pages = DIV_ROUND_UP(cfg->array + array_len - 1, PAGE_SIZE) -
 		    cfg->array / PAGE_SIZE;
-	pages = kmalloc(sizeof(struct page *) * num_pages, GFP_KERNEL);
+	pages = kmalloc_array(num_pages, sizeof(*pages), GFP_KERNEL);
 	if (!pages)
 		return -ENOMEM;
 
 	ret = get_user_pages_fast(cfg->array, num_pages, 1, pages);
 	if (ret < 0)
-		goto err_pages;
+		goto free_pages;
 
 	if (ret != num_pages) {
 		num_pages = ret;
 		ret = -EFAULT;
-		goto err_put_page;
+		goto put_pages;
 	}
 
 	virt = vmap(pages, num_pages, VM_MAP, PAGE_KERNEL);
 	if (!virt) {
 		ret = -ENOMEM;
-		goto err_put_page;
+		goto put_pages;
 	}
 
-	privs[0] = kzalloc(sizeof(struct tlbe_priv) * params.tlb_sizes[0],
-			   GFP_KERNEL);
-	privs[1] = kzalloc(sizeof(struct tlbe_priv) * params.tlb_sizes[1],
-			   GFP_KERNEL);
+	privs[0] = kcalloc(params.tlb_sizes[0], sizeof(*privs[0]), GFP_KERNEL);
+	if (!privs[0]) {
+		ret = -ENOMEM;
+		goto put_pages;
+	}
 
-	if (!privs[0] || !privs[1]) {
+	privs[1] = kcalloc(params.tlb_sizes[1], sizeof(*privs[1]), GFP_KERNEL);
+	if (!privs[1]) {
 		ret = -ENOMEM;
-		goto err_privs;
+		goto free_privs_first;
 	}
 
-	g2h_bitmap = kzalloc(sizeof(u64) * params.tlb_sizes[1],
-	                     GFP_KERNEL);
+	g2h_bitmap = kcalloc(params.tlb_sizes[1],
+			     sizeof(*g2h_bitmap),
+			     GFP_KERNEL);
 	if (!g2h_bitmap) {
 		ret = -ENOMEM;
-		goto err_privs;
+		goto free_privs_second;
 	}
 
 	free_gtlb(vcpu_e500);
@@ -845,16 +848,14 @@ int kvm_vcpu_ioctl_config_tlb(struct kvm_vcpu *vcpu,
 
 	kvmppc_recalc_tlb1map_range(vcpu_e500);
 	return 0;
-
-err_privs:
-	kfree(privs[0]);
+ free_privs_second:
 	kfree(privs[1]);
-
-err_put_page:
+ free_privs_first:
+	kfree(privs[0]);
+ put_pages:
 	for (i = 0; i < num_pages; i++)
 		put_page(pages[i]);
-
-err_pages:
+ free_pages:
 	kfree(pages);
 	return ret;
 }
@@ -904,11 +905,9 @@ static int vcpu_mmu_init(struct kvm_vcpu *vcpu,
 int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500)
 {
 	struct kvm_vcpu *vcpu = &vcpu_e500->vcpu;
-	int entry_size = sizeof(struct kvm_book3e_206_tlb_entry);
-	int entries = KVM_E500_TLB0_SIZE + KVM_E500_TLB1_SIZE;
 
 	if (e500_mmu_host_init(vcpu_e500))
-		goto err;
+		goto free_vcpu;
 
 	vcpu_e500->gtlb_params[0].entries = KVM_E500_TLB0_SIZE;
 	vcpu_e500->gtlb_params[1].entries = KVM_E500_TLB1_SIZE;
@@ -920,37 +919,39 @@ int kvmppc_e500_tlb_init(struct kvmppc_vcpu_e500 *vcpu_e500)
 	vcpu_e500->gtlb_params[1].ways = KVM_E500_TLB1_SIZE;
 	vcpu_e500->gtlb_params[1].sets = 1;
 
-	vcpu_e500->gtlb_arch = kmalloc(entries * entry_size, GFP_KERNEL);
+	vcpu_e500->gtlb_arch = kmalloc_array(KVM_E500_TLB0_SIZE +
+					     KVM_E500_TLB1_SIZE,
+					     sizeof(*vcpu_e500->gtlb_arch),
+					     GFP_KERNEL);
 	if (!vcpu_e500->gtlb_arch)
 		return -ENOMEM;
 
 	vcpu_e500->gtlb_offset[0] = 0;
 	vcpu_e500->gtlb_offset[1] = KVM_E500_TLB0_SIZE;
 
-	vcpu_e500->gtlb_priv[0] = kzalloc(sizeof(struct tlbe_ref) *
-					  vcpu_e500->gtlb_params[0].entries,
+	vcpu_e500->gtlb_priv[0] = kcalloc(vcpu_e500->gtlb_params[0].entries,
+					  sizeof(struct tlbe_ref),
 					  GFP_KERNEL);
 	if (!vcpu_e500->gtlb_priv[0])
-		goto err;
+		goto free_vcpu;
 
-	vcpu_e500->gtlb_priv[1] = kzalloc(sizeof(struct tlbe_ref) *
-					  vcpu_e500->gtlb_params[1].entries,
+	vcpu_e500->gtlb_priv[1] = kcalloc(vcpu_e500->gtlb_params[1].entries,
+					  sizeof(struct tlbe_ref),
 					  GFP_KERNEL);
 	if (!vcpu_e500->gtlb_priv[1])
-		goto err;
+		goto free_vcpu;
 
-	vcpu_e500->g2h_tlb1_map = kzalloc(sizeof(u64) *
-					  vcpu_e500->gtlb_params[1].entries,
+	vcpu_e500->g2h_tlb1_map = kcalloc(vcpu_e500->gtlb_params[1].entries,
+					  sizeof(*vcpu_e500->g2h_tlb1_map),
 					  GFP_KERNEL);
 	if (!vcpu_e500->g2h_tlb1_map)
-		goto err;
+		goto free_vcpu;
 
 	vcpu_mmu_init(vcpu, vcpu_e500->gtlb_params);
 
 	kvmppc_recalc_tlb1map_range(vcpu_e500);
 	return 0;
-
-err:
+ free_vcpu:
 	free_gtlb(vcpu_e500);
 	return -1;
 }
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 6ce40dd..70963c8 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -27,6 +27,8 @@
 #include <linux/slab.h>
 #include <linux/file.h>
 #include <linux/module.h>
+#include <linux/irqbypass.h>
+#include <linux/kvm_irqfd.h>
 #include <asm/cputable.h>
 #include <asm/uaccess.h>
 #include <asm/kvm_ppc.h>
@@ -436,6 +438,16 @@ err_out:
 	return -EINVAL;
 }
 
+bool kvm_arch_has_vcpu_debugfs(void)
+{
+	return false;
+}
+
+int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	unsigned int i;
@@ -739,6 +751,42 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 #endif
 }
 
+/*
+ * irq_bypass_add_producer and irq_bypass_del_producer are only
+ * useful if the architecture supports PCI passthrough.
+ * irq_bypass_stop and irq_bypass_start are not needed and so
+ * kvm_ops are not defined for them.
+ */
+bool kvm_arch_has_irq_bypass(void)
+{
+	return ((kvmppc_hv_ops && kvmppc_hv_ops->irq_bypass_add_producer) ||
+		(kvmppc_pr_ops && kvmppc_pr_ops->irq_bypass_add_producer));
+}
+
+int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
+				     struct irq_bypass_producer *prod)
+{
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+	struct kvm *kvm = irqfd->kvm;
+
+	if (kvm->arch.kvm_ops->irq_bypass_add_producer)
+		return kvm->arch.kvm_ops->irq_bypass_add_producer(cons, prod);
+
+	return 0;
+}
+
+void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
+				      struct irq_bypass_producer *prod)
+{
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+	struct kvm *kvm = irqfd->kvm;
+
+	if (kvm->arch.kvm_ops->irq_bypass_del_producer)
+		kvm->arch.kvm_ops->irq_bypass_del_producer(cons, prod);
+}
+
 static void kvmppc_complete_mmio_load(struct kvm_vcpu *vcpu,
                                       struct kvm_run *run)
 {
@@ -1167,6 +1215,19 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
 	return r;
 }
 
+bool kvm_arch_intc_initialized(struct kvm *kvm)
+{
+#ifdef CONFIG_KVM_MPIC
+	if (kvm->arch.mpic)
+		return true;
+#endif
+#ifdef CONFIG_KVM_XICS
+	if (kvm->arch.xics)
+		return true;
+#endif
+	return false;
+}
+
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
                                     struct kvm_mp_state *mp_state)
 {
diff --git a/arch/powerpc/kvm/trace_hv.h b/arch/powerpc/kvm/trace_hv.h
index 33d9daf..fb21990 100644
--- a/arch/powerpc/kvm/trace_hv.h
+++ b/arch/powerpc/kvm/trace_hv.h
@@ -432,6 +432,28 @@ TRACE_EVENT(kvmppc_vcore_blocked,
 		   __entry->runner_vcpu, __entry->n_runnable, __entry->tgid)
 );
 
+TRACE_EVENT(kvmppc_vcore_wakeup,
+	TP_PROTO(int do_sleep, __u64 ns),
+
+	TP_ARGS(do_sleep, ns),
+
+	TP_STRUCT__entry(
+		__field(__u64,  ns)
+		__field(int,    waited)
+		__field(pid_t,  tgid)
+	),
+
+	TP_fast_assign(
+		__entry->ns     = ns;
+		__entry->waited = do_sleep;
+		__entry->tgid   = current->tgid;
+	),
+
+	TP_printk("%s time %lld ns, tgid=%d",
+		__entry->waited ? "wait" : "poll",
+		__entry->ns, __entry->tgid)
+);
+
 TRACE_EVENT(kvmppc_run_vcpu_enter,
 	TP_PROTO(struct kvm_vcpu *vcpu),
 
diff --git a/arch/powerpc/lib/checksum_32.S b/arch/powerpc/lib/checksum_32.S
index 0a57fe6..aa8214f 100644
--- a/arch/powerpc/lib/checksum_32.S
+++ b/arch/powerpc/lib/checksum_32.S
@@ -127,18 +127,19 @@ _GLOBAL(csum_partial_copy_generic)
 	stw	r7,12(r1)
 	stw	r8,8(r1)
 
-	rlwinm	r0,r4,3,0x8
-	rlwnm	r6,r6,r0,0,31	/* odd destination address: rotate one byte */
-	cmplwi	cr7,r0,0	/* is destination address even ? */
 	addic	r12,r6,0
 	addi	r6,r4,-4
 	neg	r0,r4
 	addi	r4,r3,-4
 	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
+	crset	4*cr7+eq
 	beq	58f
 
 	cmplw	0,r5,r0			/* is this more than total to do? */
 	blt	63f			/* if not much to do */
+	rlwinm	r7,r6,3,0x8
+	rlwnm	r12,r12,r7,0,31	/* odd destination address: rotate one byte */
+	cmplwi	cr7,r7,0	/* is destination address even ? */
 	andi.	r8,r0,3			/* get it word-aligned first */
 	mtctr	r8
 	beq+	61f
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 0e4e965..83ddc0e 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -493,36 +493,6 @@ static void native_hugepage_invalidate(unsigned long vsid,
 }
 #endif
 
-static inline int __hpte_actual_psize(unsigned int lp, int psize)
-{
-	int i, shift;
-	unsigned int mask;
-
-	/* start from 1 ignoring MMU_PAGE_4K */
-	for (i = 1; i < MMU_PAGE_COUNT; i++) {
-
-		/* invalid penc */
-		if (mmu_psize_defs[psize].penc[i] == -1)
-			continue;
-		/*
-		 * encoding bits per actual page size
-		 *        PTE LP     actual page size
-		 *    rrrr rrrz		>=8KB
-		 *    rrrr rrzz		>=16KB
-		 *    rrrr rzzz		>=32KB
-		 *    rrrr zzzz		>=64KB
-		 * .......
-		 */
-		shift = mmu_psize_defs[i].shift - LP_SHIFT;
-		if (shift > LP_BITS)
-			shift = LP_BITS;
-		mask = (1 << shift) - 1;
-		if ((lp & mask) == mmu_psize_defs[psize].penc[i])
-			return i;
-	}
-	return -1;
-}
-
 static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 			int *psize, int *apsize, int *ssize, unsigned long *vpn)
 {
@@ -538,16 +508,8 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 		size   = MMU_PAGE_4K;
 		a_size = MMU_PAGE_4K;
 	} else {
-		for (size = 0; size < MMU_PAGE_COUNT; size++) {
-
-			/* valid entries have a shift value */
-			if (!mmu_psize_defs[size].shift)
-				continue;
-
-			a_size = __hpte_actual_psize(lp, size);
-			if (a_size != -1)
-				break;
-		}
+		size = hpte_page_sizes[lp] & 0xf;
+		a_size = hpte_page_sizes[lp] >> 4;
 	}
 	/* This works for all page sizes, and for 256M and 1T segments */
 	if (cpu_has_feature(CPU_FTR_ARCH_300))
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 4e83d87..44d3c3a 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -93,6 +93,9 @@ static unsigned long _SDR1;
 struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 EXPORT_SYMBOL_GPL(mmu_psize_defs);
 
+u8 hpte_page_sizes[1 << LP_BITS];
+EXPORT_SYMBOL_GPL(hpte_page_sizes);
+
 struct hash_pte *htab_address;
 unsigned long htab_size_bytes;
 unsigned long htab_hash_mask;
@@ -564,8 +567,60 @@ static void __init htab_scan_page_sizes(void)
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
+/*
+ * Fill in the hpte_page_sizes[] array.
+ * We go through the mmu_psize_defs[] array looking for all the
+ * supported base/actual page size combinations.  Each combination
+ * has a unique pagesize encoding (penc) value in the low bits of
+ * the LP field of the HPTE.  For actual page sizes less than 1MB,
+ * some of the upper LP bits are used for RPN bits, meaning that
+ * we need to fill in several entries in hpte_page_sizes[].
+ *
+ * In diagrammatic form, with r = RPN bits and z = page size bits:
+ *        PTE LP     actual page size
+ *    rrrr rrrz		>=8KB
+ *    rrrr rrzz		>=16KB
+ *    rrrr rzzz		>=32KB
+ *    rrrr zzzz		>=64KB
+ *    ...
+ *
+ * The zzzz bits are implementation-specific but are chosen so that
+ * no encoding for a larger page size uses the same value in its
+ * low-order N bits as the encoding for the 2^(12+N) byte page size
+ * (if it exists).
+ */
+static void init_hpte_page_sizes(void)
+{
+	long int ap, bp;
+	long int shift, penc;
+
+	for (bp = 0; bp < MMU_PAGE_COUNT; ++bp) {
+		if (!mmu_psize_defs[bp].shift)
+			continue;	/* not a supported page size */
+		for (ap = bp; ap < MMU_PAGE_COUNT; ++ap) {
+			penc = mmu_psize_defs[bp].penc[ap];
+			if (penc == -1)
+				continue;
+			shift = mmu_psize_defs[ap].shift - LP_SHIFT;
+			if (shift <= 0)
+				continue;	/* should never happen */
+			/*
+			 * For page sizes less than 1MB, this loop
+			 * replicates the entry for all possible values
+			 * of the rrrr bits.
+			 */
+			while (penc < (1 << LP_BITS)) {
+				hpte_page_sizes[penc] = (ap << 4) | bp;
+				penc += 1 << shift;
+			}
+		}
+	}
+}
+
 static void __init htab_init_page_sizes(void)
 {
+	init_hpte_page_sizes();
+
 	if (!debug_pagealloc_enabled()) {
 		/*
 		 * Pick a size for the linear mapping. Currently, we only
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 7d95bc4..c491f2c 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -369,44 +369,34 @@ void destroy_context(struct mm_struct *mm)
 }
 
 #ifdef CONFIG_SMP
-
-static int mmu_context_cpu_notify(struct notifier_block *self,
-				  unsigned long action, void *hcpu)
+static int mmu_ctx_cpu_prepare(unsigned int cpu)
 {
-	unsigned int cpu = (unsigned int)(long)hcpu;
-
 	/* We don't touch CPU 0 map, it's allocated at aboot and kept
 	 * around forever
 	 */
 	if (cpu == boot_cpuid)
-		return NOTIFY_OK;
-
-	switch (action) {
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-		pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
-		stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
-		break;
-#ifdef CONFIG_HOTPLUG_CPU
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
-		kfree(stale_map[cpu]);
-		stale_map[cpu] = NULL;
-
-		/* We also clear the cpu_vm_mask bits of CPUs going away */
-		clear_tasks_mm_cpumask(cpu);
-	break;
-#endif /* CONFIG_HOTPLUG_CPU */
-	}
-	return NOTIFY_OK;
+		return 0;
+
+	pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
+	stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
+	return 0;
 }
 
-static struct notifier_block mmu_context_cpu_nb = {
-	.notifier_call	= mmu_context_cpu_notify,
-};
+static int mmu_ctx_cpu_dead(unsigned int cpu)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	if (cpu == boot_cpuid)
+		return 0;
+
+	pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
+	kfree(stale_map[cpu]);
+	stale_map[cpu] = NULL;
+
+	/* We also clear the cpu_vm_mask bits of CPUs going away */
+	clear_tasks_mm_cpumask(cpu);
+#endif
+	return 0;
+}
 
 #endif /* CONFIG_SMP */
 
@@ -469,7 +459,9 @@ void __init mmu_context_init(void)
 #else
 	stale_map[boot_cpuid] = memblock_virt_alloc(CTX_MAP_SIZE, 0);
 
-	register_cpu_notifier(&mmu_context_cpu_nb);
+	cpuhp_setup_state_nocalls(CPUHP_POWERPC_MMU_CTX_PREPARE,
+				  "powerpc/mmu/ctx:prepare",
+				  mmu_ctx_cpu_prepare, mmu_ctx_cpu_dead);
 #endif
 
 	printk(KERN_INFO
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index eda1c7a..e2974fc 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -113,7 +113,12 @@ BEGIN_FTR_SECTION
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
-0:
+0:	/*
+	 * For userspace addresses, make sure this is region 0.
+	 */
+	cmpdi	r9, 0
+	bne	8f
+
 	/* when using slices, we extract the psize off the slice bitmaps
 	 * and then we need to get the sllp encoding off the mmu_psize_defs
 	 * array.
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 2975754..5364d4a 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -103,7 +103,7 @@ spufs_new_inode(struct super_block *sb, umode_t mode)
 	inode->i_mode = mode;
 	inode->i_uid = current_fsuid();
 	inode->i_gid = current_fsgid();
-	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
 out:
 	return inode;
 }
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 5a8564c..c9eb7d6 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -852,37 +852,33 @@ static void smp_core99_setup_cpu(int cpu_nr)
 
 #ifdef CONFIG_PPC64
 #ifdef CONFIG_HOTPLUG_CPU
-static int smp_core99_cpu_notify(struct notifier_block *self,
-				 unsigned long action, void *hcpu)
+static unsigned int smp_core99_host_open;
+
+static int smp_core99_cpu_prepare(unsigned int cpu)
 {
 	int rc;
 
-	switch(action & ~CPU_TASKS_FROZEN) {
-	case CPU_UP_PREPARE:
-		/* Open i2c bus if it was used for tb sync */
-		if (pmac_tb_clock_chip_host) {
-			rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
-			if (rc) {
-				pr_err("Failed to open i2c bus for time sync\n");
-				return notifier_from_errno(rc);
-			}
+	/* Open i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host && !smp_core99_host_open) {
+		rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
+		if (rc) {
+			pr_err("Failed to open i2c bus for time sync\n");
+			return notifier_from_errno(rc);
 		}
-		break;
-	case CPU_ONLINE:
-	case CPU_UP_CANCELED:
-		/* Close i2c bus if it was used for tb sync */
-		if (pmac_tb_clock_chip_host)
-			pmac_i2c_close(pmac_tb_clock_chip_host);
-		break;
-	default:
-		break;
+		smp_core99_host_open = 1;
 	}
-	return NOTIFY_OK;
+	return 0;
 }
 
-static struct notifier_block smp_core99_cpu_nb = {
-	.notifier_call	= smp_core99_cpu_notify,
-};
+static int smp_core99_cpu_online(unsigned int cpu)
+{
+	/* Close i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host && smp_core99_host_open) {
+		pmac_i2c_close(pmac_tb_clock_chip_host);
+		smp_core99_host_open = 0;
+	}
+	return 0;
+}
 #endif /* CONFIG_HOTPLUG_CPU */
 
 static void __init smp_core99_bringup_done(void)
@@ -902,7 +898,11 @@ static void __init smp_core99_bringup_done(void)
 		g5_phy_disable_cpu1();
 	}
 #ifdef CONFIG_HOTPLUG_CPU
-	register_cpu_notifier(&smp_core99_cpu_nb);
+	cpuhp_setup_state_nocalls(CPUHP_POWERPC_PMAC_PREPARE,
+				  "powerpc/pmac:prepare", smp_core99_cpu_prepare,
+				  NULL);
+	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "powerpc/pmac:online",
+				  smp_core99_cpu_online, NULL);
 #endif
 
 	if (ppc_md.progress)
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 3d29d40..44d2d84 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -208,6 +208,7 @@ OPAL_CALL(opal_pci_config_write_byte,		OPAL_PCI_CONFIG_WRITE_BYTE);
 OPAL_CALL(opal_pci_config_write_half_word,	OPAL_PCI_CONFIG_WRITE_HALF_WORD);
 OPAL_CALL(opal_pci_config_write_word,		OPAL_PCI_CONFIG_WRITE_WORD);
 OPAL_CALL(opal_set_xive,			OPAL_SET_XIVE);
+OPAL_CALL_REAL(opal_rm_set_xive,		OPAL_SET_XIVE);
 OPAL_CALL(opal_get_xive,			OPAL_GET_XIVE);
 OPAL_CALL(opal_register_exception_handler,	OPAL_REGISTER_OPAL_EXCEPTION_HANDLER);
 OPAL_CALL(opal_pci_eeh_freeze_status,		OPAL_PCI_EEH_FREEZE_STATUS);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index d27897a..d4b33dd 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -124,6 +124,13 @@ static inline bool pnv_pci_is_m64(struct pnv_phb *phb, struct resource *r)
 		r->start < (phb->ioda.m64_base + phb->ioda.m64_size));
 }
 
+static inline bool pnv_pci_is_m64_flags(unsigned long resource_flags)
+{
+	unsigned long flags = (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH);
+
+	return (resource_flags & flags) == flags;
+}
+
 static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
 {
 	s64 rc;
@@ -175,11 +182,12 @@ static struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb)
 static void pnv_ioda_free_pe(struct pnv_ioda_pe *pe)
 {
 	struct pnv_phb *phb = pe->phb;
+	unsigned int pe_num = pe->pe_number;
 
 	WARN_ON(pe->pdev);
 
 	memset(pe, 0, sizeof(struct pnv_ioda_pe));
-	clear_bit(pe->pe_number, phb->ioda.pe_alloc);
+	clear_bit(pe_num, phb->ioda.pe_alloc);
 }
 
 /* The default M64 BAR is shared by all PEs */
@@ -2229,7 +2237,7 @@ static long pnv_pci_ioda2_set_window(struct iommu_table_group *table_group,
 
 	pnv_pci_link_table_and_group(phb->hose->node, num,
 			tbl, &pe->table_group);
-	pnv_pci_phb3_tce_invalidate_pe(pe);
+	pnv_pci_ioda2_tce_invalidate_pe(pe);
 
 	return 0;
 }
@@ -2367,7 +2375,7 @@ static long pnv_pci_ioda2_unset_window(struct iommu_table_group *table_group,
 	if (ret)
 		pe_warn(pe, "Unmapping failed, ret = %ld\n", ret);
 	else
-		pnv_pci_phb3_tce_invalidate_pe(pe);
+		pnv_pci_ioda2_tce_invalidate_pe(pe);
 
 	pnv_pci_unlink_table_and_group(table_group->tables[num], table_group);
 
@@ -2723,15 +2731,21 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
 }
 
 #ifdef CONFIG_PCI_MSI
-static void pnv_ioda2_msi_eoi(struct irq_data *d)
+int64_t pnv_opal_pci_msi_eoi(struct irq_chip *chip, unsigned int hw_irq)
 {
-	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
-	struct irq_chip *chip = irq_data_get_irq_chip(d);
 	struct pnv_phb *phb = container_of(chip, struct pnv_phb,
 					   ioda.irq_chip);
+
+	return opal_pci_msi_eoi(phb->opal_id, hw_irq);
+}
+
+static void pnv_ioda2_msi_eoi(struct irq_data *d)
+{
 	int64_t rc;
+	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
+	struct irq_chip *chip = irq_data_get_irq_chip(d);
 
-	rc = opal_pci_msi_eoi(phb->opal_id, hw_irq);
+	rc = pnv_opal_pci_msi_eoi(chip, hw_irq);
 	WARN_ON_ONCE(rc);
 
 	icp_native_eoi(d);
@@ -2761,6 +2775,16 @@ void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq)
 	irq_set_chip(virq, &phb->ioda.irq_chip);
 }
 
+/*
+ * Returns true iff chip is something that we could call
+ * pnv_opal_pci_msi_eoi for.
+ */
+bool is_pnv_opal_msi(struct irq_chip *chip)
+{
+	return chip->irq_eoi == pnv_ioda2_msi_eoi;
+}
+EXPORT_SYMBOL_GPL(is_pnv_opal_msi);
+
 static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 				  unsigned int hwirq, unsigned int virq,
 				  unsigned int is_64, struct msi_msg *msg)
@@ -2883,7 +2907,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
 		if (!res->flags || res->parent)
 			continue;
-		if (!pnv_pci_is_m64(phb, res)) {
+		if (!pnv_pci_is_m64_flags(res->flags)) {
 			dev_warn(&pdev->dev, "Don't support SR-IOV with"
 					" non M64 VF BAR%d: %pR. \n",
 				 i, res);
@@ -3145,7 +3169,7 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
 	 * alignment for any 64-bit resource, PCIe doesn't care and
 	 * bridges only do 64-bit prefetchable anyway.
 	 */
-	if (phb->ioda.m64_segsize && (type & IORESOURCE_MEM_64))
+	if (phb->ioda.m64_segsize && pnv_pci_is_m64_flags(type))
 		return phb->ioda.m64_segsize;
 	if (type & IORESOURCE_MEM)
 		return phb->ioda.m32_segsize;
@@ -3452,12 +3476,6 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 	struct pnv_phb *phb = pe->phb;
 	struct pnv_ioda_pe *slave, *tmp;
 
-	/* Release slave PEs in compound PE */
-	if (pe->flags & PNV_IODA_PE_MASTER) {
-		list_for_each_entry_safe(slave, tmp, &pe->slaves, list)
-			pnv_ioda_release_pe(slave);
-	}
-
 	list_del(&pe->list);
 	switch (phb->type) {
 	case PNV_PHB_IODA1:
@@ -3472,7 +3490,26 @@ static void pnv_ioda_release_pe(struct pnv_ioda_pe *pe)
 
 	pnv_ioda_release_pe_seg(pe);
 	pnv_ioda_deconfigure_pe(pe->phb, pe);
-	pnv_ioda_free_pe(pe);
+
+	/* Release slave PEs in the compound PE */
+	if (pe->flags & PNV_IODA_PE_MASTER) {
+		list_for_each_entry_safe(slave, tmp, &pe->slaves, list) {
+			list_del(&slave->list);
+			pnv_ioda_free_pe(slave);
+		}
+	}
+
+	/*
+	 * The PE for root bus can be removed because of hotplug in EEH
+	 * recovery for fenced PHB error. We need to mark the PE dead so
+	 * that it can be populated again in PCI hot add path. The PE
+	 * shouldn't be destroyed as it's the global reserved resource.
+	 */
+	if (phb->ioda.root_pe_populated &&
+	    phb->ioda.root_pe_idx == pe->pe_number)
+		phb->ioda.root_pe_populated = false;
+	else
+		pnv_ioda_free_pe(pe);
 }
 
 static void pnv_pci_release_device(struct pci_dev *pdev)
@@ -3488,7 +3525,17 @@ static void pnv_pci_release_device(struct pci_dev *pdev)
 	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
 		return;
 
+	/*
+	 * PCI hotplug can happen as part of EEH error recovery. The @pdn
+	 * isn't removed and added afterwards in this scenario. We should
+	 * set the PE number in @pdn to an invalid one. Otherwise, the PE's
+	 * device count is decreased on removing devices while failing to
+	 * be increased on adding devices. It leads to unbalanced PE's device
+	 * count and eventually make normal PCI hotplug path broken.
+	 */
 	pe = &phb->ioda.pe_array[pdn->pe_number];
+	pdn->pe_number = IODA_INVALID_PE;
+
 	WARN_ON(--pe->device_count < 0);
 	if (pe->device_count == 0)
 		pnv_ioda_release_pe(pe);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 7769000..97aa3f3 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -41,7 +41,6 @@
 #include <linux/root_dev.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
-#include <linux/kexec.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -66,6 +65,7 @@
 #include <asm/eeh.h>
 #include <asm/reg.h>
 #include <asm/plpar_wrappers.h>
+#include <asm/kexec.h>
 
 #include "pseries.h"
 
diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c
index 7357cfd..d38e86f 100644
--- a/arch/powerpc/sysdev/xics/icp-opal.c
+++ b/arch/powerpc/sysdev/xics/icp-opal.c
@@ -23,10 +23,10 @@
 
 static void icp_opal_teardown_cpu(void)
 {
-	int cpu = smp_processor_id();
+	int hw_cpu = hard_smp_processor_id();
 
 	/* Clear any pending IPI */
-	opal_int_set_mfrr(cpu, 0xff);
+	opal_int_set_mfrr(hw_cpu, 0xff);
 }
 
 static void icp_opal_flush_ipi(void)
@@ -101,14 +101,16 @@ static void icp_opal_eoi(struct irq_data *d)
 
 static void icp_opal_cause_ipi(int cpu, unsigned long data)
 {
-	opal_int_set_mfrr(cpu, IPI_PRIORITY);
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+
+	opal_int_set_mfrr(hw_cpu, IPI_PRIORITY);
 }
 
 static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id)
 {
-	int cpu = smp_processor_id();
+	int hw_cpu = hard_smp_processor_id();
 
-	opal_int_set_mfrr(cpu, 0xff);
+	opal_int_set_mfrr(hw_cpu, 0xff);
 
 	return smp_ipi_demux();
 }
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index c109f07..426481d 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -67,12 +67,13 @@ config DEBUG_RODATA
 
 config S390
 	def_bool y
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_SG_CHAIN
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_INLINE_READ_LOCK
 	select ARCH_INLINE_READ_LOCK_BH
@@ -109,6 +110,7 @@ config S390
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANTS_PROT_NUMA_PROT_NONE
+	select ARCH_WANTS_UBSAN_NO_NULL
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS2
@@ -136,6 +138,7 @@ config S390
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_EXIT_THREAD
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 224b427..54e0052 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -46,6 +46,8 @@ cflags-$(CONFIG_MARCH_Z196_TUNE)	+= -mtune=z196
 cflags-$(CONFIG_MARCH_ZEC12_TUNE)	+= -mtune=zEC12
 cflags-$(CONFIG_MARCH_Z13_TUNE)	+= -mtune=z13
 
+cflags-y += -Wa,-I$(srctree)/arch/$(ARCH)/include
+
 #KBUILD_IMAGE is necessary for make rpm
 KBUILD_IMAGE	:=arch/s390/boot/image
 
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 15c9424..f587c48 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -542,7 +542,7 @@ static int __init appldata_init(void)
 		rc = PTR_ERR(appldata_pdev);
 		goto out_driver;
 	}
-	appldata_wq = create_singlethread_workqueue("appldata");
+	appldata_wq = alloc_ordered_workqueue("appldata", 0);
 	if (!appldata_wq) {
 		rc = -ENOMEM;
 		goto out_device;
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index 33ba697c..0daa070 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -17,6 +17,7 @@ KBUILD_CFLAGS += $(call cc-option,-mpacked-stack)
 KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
 
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 OBJECTS := $(addprefix $(objtree)/arch/s390/kernel/, head.o sclp.o ebcdic.o als.o)
 OBJECTS += $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o
diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig
index 412b1bd..4596868 100644
--- a/arch/s390/configs/default_defconfig
+++ b/arch/s390/configs/default_defconfig
@@ -260,7 +260,6 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_TABLES_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
 CONFIG_NF_TABLES_ARP=m
-CONFIG_NF_NAT_IPV4=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -269,6 +268,8 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -281,7 +282,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NF_TABLES_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NF_NAT_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
@@ -299,6 +299,8 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NET_SCTPPROBE=m
 CONFIG_RDS=m
@@ -359,6 +361,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
 CONFIG_DNS_RESOLVER=y
+CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
@@ -409,6 +412,7 @@ CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_RAID=m
@@ -428,6 +432,7 @@ CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_TUN=m
 CONFIG_VETH=m
@@ -453,7 +458,6 @@ CONFIG_PPP_SYNC_TTY=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
@@ -495,6 +499,7 @@ CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig
index bec279e..1dd05e3 100644
--- a/arch/s390/configs/gcov_defconfig
+++ b/arch/s390/configs/gcov_defconfig
@@ -15,6 +15,8 @@ CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
@@ -255,7 +257,6 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_TABLES_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
 CONFIG_NF_TABLES_ARP=m
-CONFIG_NF_NAT_IPV4=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -264,6 +265,8 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -276,7 +279,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NF_TABLES_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NF_NAT_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
@@ -294,6 +296,8 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NET_SCTPPROBE=m
 CONFIG_RDS=m
@@ -353,6 +357,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
 CONFIG_DNS_RESOLVER=y
+CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
@@ -403,6 +408,7 @@ CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_RAID=m
@@ -422,6 +428,7 @@ CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_TUN=m
 CONFIG_VETH=m
@@ -447,7 +454,6 @@ CONFIG_PPP_SYNC_TTY=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
@@ -487,6 +493,7 @@ CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
index 1751446..29d1178 100644
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@@ -16,6 +16,8 @@ CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
@@ -255,7 +257,6 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_TABLES_IPV4=m
 CONFIG_NFT_CHAIN_ROUTE_IPV4=m
 CONFIG_NF_TABLES_ARP=m
-CONFIG_NF_NAT_IPV4=m
 CONFIG_NFT_CHAIN_NAT_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -264,6 +265,8 @@ CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -276,7 +279,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_NF_TABLES_IPV6=m
 CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NF_NAT_IPV6=m
 CONFIG_NFT_CHAIN_NAT_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
@@ -294,6 +296,8 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NET_SCTPPROBE=m
 CONFIG_RDS=m
@@ -353,6 +357,7 @@ CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
 CONFIG_DNS_RESOLVER=y
+CONFIG_CGROUP_NET_PRIO=y
 CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
@@ -403,6 +408,7 @@ CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_LOG_USERSPACE=m
 CONFIG_DM_RAID=m
@@ -422,6 +428,7 @@ CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_TUN=m
 CONFIG_VETH=m
@@ -447,7 +454,6 @@ CONFIG_PPP_SYNC_TTY=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_LEGACY_PTY_COUNT=0
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
@@ -488,6 +494,7 @@ CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
 CONFIG_ISO9660_FS=y
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 2ea18b0..303d28e 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -31,69 +31,29 @@
 #include <crypto/xts.h>
 #include <asm/cpacf.h>
 
-#define AES_KEYLEN_128		1
-#define AES_KEYLEN_192		2
-#define AES_KEYLEN_256		4
-
 static u8 *ctrblk;
 static DEFINE_SPINLOCK(ctrblk_lock);
-static char keylen_flag;
+
+static cpacf_mask_t km_functions, kmc_functions, kmctr_functions;
 
 struct s390_aes_ctx {
 	u8 key[AES_MAX_KEY_SIZE];
-	long enc;
-	long dec;
 	int key_len;
+	unsigned long fc;
 	union {
 		struct crypto_skcipher *blk;
 		struct crypto_cipher *cip;
 	} fallback;
 };
 
-struct pcc_param {
-	u8 key[32];
-	u8 tweak[16];
-	u8 block[16];
-	u8 bit[16];
-	u8 xts[16];
-};
-
 struct s390_xts_ctx {
 	u8 key[32];
 	u8 pcc_key[32];
-	long enc;
-	long dec;
 	int key_len;
+	unsigned long fc;
 	struct crypto_skcipher *fallback;
 };
 
-/*
- * Check if the key_len is supported by the HW.
- * Returns 0 if it is, a positive number if it is not and software fallback is
- * required or a negative number in case the key size is not valid
- */
-static int need_fallback(unsigned int key_len)
-{
-	switch (key_len) {
-	case 16:
-		if (!(keylen_flag & AES_KEYLEN_128))
-			return 1;
-		break;
-	case 24:
-		if (!(keylen_flag & AES_KEYLEN_192))
-			return 1;
-		break;
-	case 32:
-		if (!(keylen_flag & AES_KEYLEN_256))
-			return 1;
-		break;
-	default:
-		return -1;
-		break;
-	}
-	return 0;
-}
-
 static int setkey_fallback_cip(struct crypto_tfm *tfm, const u8 *in_key,
 		unsigned int key_len)
 {
@@ -117,72 +77,44 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 		       unsigned int key_len)
 {
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
-	int ret;
+	unsigned long fc;
 
-	ret = need_fallback(key_len);
-	if (ret < 0) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	/* Pick the correct function code based on the key length */
+	fc = (key_len == 16) ? CPACF_KM_AES_128 :
+	     (key_len == 24) ? CPACF_KM_AES_192 :
+	     (key_len == 32) ? CPACF_KM_AES_256 : 0;
 
-	sctx->key_len = key_len;
-	if (!ret) {
-		memcpy(sctx->key, in_key, key_len);
-		return 0;
-	}
+	/* Check if the function code is available */
+	sctx->fc = (fc && cpacf_test_func(&km_functions, fc)) ? fc : 0;
+	if (!sctx->fc)
+		return setkey_fallback_cip(tfm, in_key, key_len);
 
-	return setkey_fallback_cip(tfm, in_key, key_len);
+	sctx->key_len = key_len;
+	memcpy(sctx->key, in_key, key_len);
+	return 0;
 }
 
 static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
 
-	if (unlikely(need_fallback(sctx->key_len))) {
+	if (unlikely(!sctx->fc)) {
 		crypto_cipher_encrypt_one(sctx->fallback.cip, out, in);
 		return;
 	}
-
-	switch (sctx->key_len) {
-	case 16:
-		cpacf_km(CPACF_KM_AES_128_ENC, &sctx->key, out, in,
-			 AES_BLOCK_SIZE);
-		break;
-	case 24:
-		cpacf_km(CPACF_KM_AES_192_ENC, &sctx->key, out, in,
-			 AES_BLOCK_SIZE);
-		break;
-	case 32:
-		cpacf_km(CPACF_KM_AES_256_ENC, &sctx->key, out, in,
-			 AES_BLOCK_SIZE);
-		break;
-	}
+	cpacf_km(sctx->fc, &sctx->key, out, in, AES_BLOCK_SIZE);
 }
 
 static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
 
-	if (unlikely(need_fallback(sctx->key_len))) {
+	if (unlikely(!sctx->fc)) {
 		crypto_cipher_decrypt_one(sctx->fallback.cip, out, in);
 		return;
 	}
-
-	switch (sctx->key_len) {
-	case 16:
-		cpacf_km(CPACF_KM_AES_128_DEC, &sctx->key, out, in,
-			 AES_BLOCK_SIZE);
-		break;
-	case 24:
-		cpacf_km(CPACF_KM_AES_192_DEC, &sctx->key, out, in,
-			 AES_BLOCK_SIZE);
-		break;
-	case 32:
-		cpacf_km(CPACF_KM_AES_256_DEC, &sctx->key, out, in,
-			 AES_BLOCK_SIZE);
-		break;
-	}
+	cpacf_km(sctx->fc | CPACF_DECRYPT,
+		 &sctx->key, out, in, AES_BLOCK_SIZE);
 }
 
 static int fallback_init_cip(struct crypto_tfm *tfm)
@@ -291,50 +223,37 @@ static int ecb_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 			   unsigned int key_len)
 {
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
-	int ret;
+	unsigned long fc;
 
-	ret = need_fallback(key_len);
-	if (ret > 0) {
-		sctx->key_len = key_len;
-		return setkey_fallback_blk(tfm, in_key, key_len);
-	}
+	/* Pick the correct function code based on the key length */
+	fc = (key_len == 16) ? CPACF_KM_AES_128 :
+	     (key_len == 24) ? CPACF_KM_AES_192 :
+	     (key_len == 32) ? CPACF_KM_AES_256 : 0;
 
-	switch (key_len) {
-	case 16:
-		sctx->enc = CPACF_KM_AES_128_ENC;
-		sctx->dec = CPACF_KM_AES_128_DEC;
-		break;
-	case 24:
-		sctx->enc = CPACF_KM_AES_192_ENC;
-		sctx->dec = CPACF_KM_AES_192_DEC;
-		break;
-	case 32:
-		sctx->enc = CPACF_KM_AES_256_ENC;
-		sctx->dec = CPACF_KM_AES_256_DEC;
-		break;
-	}
+	/* Check if the function code is available */
+	sctx->fc = (fc && cpacf_test_func(&km_functions, fc)) ? fc : 0;
+	if (!sctx->fc)
+		return setkey_fallback_blk(tfm, in_key, key_len);
 
-	return aes_set_key(tfm, in_key, key_len);
+	sctx->key_len = key_len;
+	memcpy(sctx->key, in_key, key_len);
+	return 0;
 }
 
-static int ecb_aes_crypt(struct blkcipher_desc *desc, long func, void *param,
+static int ecb_aes_crypt(struct blkcipher_desc *desc, unsigned long modifier,
 			 struct blkcipher_walk *walk)
 {
-	int ret = blkcipher_walk_virt(desc, walk);
-	unsigned int nbytes;
+	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+	unsigned int nbytes, n;
+	int ret;
 
-	while ((nbytes = walk->nbytes)) {
+	ret = blkcipher_walk_virt(desc, walk);
+	while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
 		/* only use complete blocks */
-		unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
-		u8 *out = walk->dst.virt.addr;
-		u8 *in = walk->src.virt.addr;
-
-		ret = cpacf_km(func, param, out, in, n);
-		if (ret < 0 || ret != n)
-			return -EIO;
-
-		nbytes &= AES_BLOCK_SIZE - 1;
-		ret = blkcipher_walk_done(desc, walk, nbytes);
+		n = nbytes & ~(AES_BLOCK_SIZE - 1);
+		cpacf_km(sctx->fc | modifier, sctx->key,
+			 walk->dst.virt.addr, walk->src.virt.addr, n);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
 	}
 
 	return ret;
@@ -347,11 +266,11 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
-	if (unlikely(need_fallback(sctx->key_len)))
+	if (unlikely(!sctx->fc))
 		return fallback_blk_enc(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ecb_aes_crypt(desc, sctx->enc, sctx->key, &walk);
+	return ecb_aes_crypt(desc, 0, &walk);
 }
 
 static int ecb_aes_decrypt(struct blkcipher_desc *desc,
@@ -361,11 +280,11 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
-	if (unlikely(need_fallback(sctx->key_len)))
+	if (unlikely(!sctx->fc))
 		return fallback_blk_dec(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ecb_aes_crypt(desc, sctx->dec, sctx->key, &walk);
+	return ecb_aes_crypt(desc, CPACF_DECRYPT, &walk);
 }
 
 static int fallback_init_blk(struct crypto_tfm *tfm)
@@ -420,64 +339,45 @@ static int cbc_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 			   unsigned int key_len)
 {
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
-	int ret;
+	unsigned long fc;
 
-	ret = need_fallback(key_len);
-	if (ret > 0) {
-		sctx->key_len = key_len;
-		return setkey_fallback_blk(tfm, in_key, key_len);
-	}
+	/* Pick the correct function code based on the key length */
+	fc = (key_len == 16) ? CPACF_KMC_AES_128 :
+	     (key_len == 24) ? CPACF_KMC_AES_192 :
+	     (key_len == 32) ? CPACF_KMC_AES_256 : 0;
 
-	switch (key_len) {
-	case 16:
-		sctx->enc = CPACF_KMC_AES_128_ENC;
-		sctx->dec = CPACF_KMC_AES_128_DEC;
-		break;
-	case 24:
-		sctx->enc = CPACF_KMC_AES_192_ENC;
-		sctx->dec = CPACF_KMC_AES_192_DEC;
-		break;
-	case 32:
-		sctx->enc = CPACF_KMC_AES_256_ENC;
-		sctx->dec = CPACF_KMC_AES_256_DEC;
-		break;
-	}
+	/* Check if the function code is available */
+	sctx->fc = (fc && cpacf_test_func(&kmc_functions, fc)) ? fc : 0;
+	if (!sctx->fc)
+		return setkey_fallback_blk(tfm, in_key, key_len);
 
-	return aes_set_key(tfm, in_key, key_len);
+	sctx->key_len = key_len;
+	memcpy(sctx->key, in_key, key_len);
+	return 0;
 }
 
-static int cbc_aes_crypt(struct blkcipher_desc *desc, long func,
+static int cbc_aes_crypt(struct blkcipher_desc *desc, unsigned long modifier,
 			 struct blkcipher_walk *walk)
 {
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
-	int ret = blkcipher_walk_virt(desc, walk);
-	unsigned int nbytes = walk->nbytes;
+	unsigned int nbytes, n;
+	int ret;
 	struct {
 		u8 iv[AES_BLOCK_SIZE];
 		u8 key[AES_MAX_KEY_SIZE];
 	} param;
 
-	if (!nbytes)
-		goto out;
-
+	ret = blkcipher_walk_virt(desc, walk);
 	memcpy(param.iv, walk->iv, AES_BLOCK_SIZE);
 	memcpy(param.key, sctx->key, sctx->key_len);
-	do {
+	while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
 		/* only use complete blocks */
-		unsigned int n = nbytes & ~(AES_BLOCK_SIZE - 1);
-		u8 *out = walk->dst.virt.addr;
-		u8 *in = walk->src.virt.addr;
-
-		ret = cpacf_kmc(func, &param, out, in, n);
-		if (ret < 0 || ret != n)
-			return -EIO;
-
-		nbytes &= AES_BLOCK_SIZE - 1;
-		ret = blkcipher_walk_done(desc, walk, nbytes);
-	} while ((nbytes = walk->nbytes));
+		n = nbytes & ~(AES_BLOCK_SIZE - 1);
+		cpacf_kmc(sctx->fc | modifier, &param,
+			  walk->dst.virt.addr, walk->src.virt.addr, n);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
+	}
 	memcpy(walk->iv, param.iv, AES_BLOCK_SIZE);
-
-out:
 	return ret;
 }
 
@@ -488,11 +388,11 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
-	if (unlikely(need_fallback(sctx->key_len)))
+	if (unlikely(!sctx->fc))
 		return fallback_blk_enc(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_aes_crypt(desc, sctx->enc, &walk);
+	return cbc_aes_crypt(desc, 0, &walk);
 }
 
 static int cbc_aes_decrypt(struct blkcipher_desc *desc,
@@ -502,11 +402,11 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
-	if (unlikely(need_fallback(sctx->key_len)))
+	if (unlikely(!sctx->fc))
 		return fallback_blk_dec(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_aes_crypt(desc, sctx->dec, &walk);
+	return cbc_aes_crypt(desc, CPACF_DECRYPT, &walk);
 }
 
 static struct crypto_alg cbc_aes_alg = {
@@ -594,83 +494,67 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 			   unsigned int key_len)
 {
 	struct s390_xts_ctx *xts_ctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
+	unsigned long fc;
 	int err;
 
 	err = xts_check_key(tfm, in_key, key_len);
 	if (err)
 		return err;
 
-	switch (key_len) {
-	case 32:
-		xts_ctx->enc = CPACF_KM_XTS_128_ENC;
-		xts_ctx->dec = CPACF_KM_XTS_128_DEC;
-		memcpy(xts_ctx->key + 16, in_key, 16);
-		memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16);
-		break;
-	case 48:
-		xts_ctx->enc = 0;
-		xts_ctx->dec = 0;
-		xts_fallback_setkey(tfm, in_key, key_len);
-		break;
-	case 64:
-		xts_ctx->enc = CPACF_KM_XTS_256_ENC;
-		xts_ctx->dec = CPACF_KM_XTS_256_DEC;
-		memcpy(xts_ctx->key, in_key, 32);
-		memcpy(xts_ctx->pcc_key, in_key + 32, 32);
-		break;
-	default:
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	/* Pick the correct function code based on the key length */
+	fc = (key_len == 32) ? CPACF_KM_XTS_128 :
+	     (key_len == 64) ? CPACF_KM_XTS_256 : 0;
+
+	/* Check if the function code is available */
+	xts_ctx->fc = (fc && cpacf_test_func(&km_functions, fc)) ? fc : 0;
+	if (!xts_ctx->fc)
+		return xts_fallback_setkey(tfm, in_key, key_len);
+
+	/* Split the XTS key into the two subkeys */
+	key_len = key_len / 2;
 	xts_ctx->key_len = key_len;
+	memcpy(xts_ctx->key, in_key, key_len);
+	memcpy(xts_ctx->pcc_key, in_key + key_len, key_len);
 	return 0;
 }
 
-static int xts_aes_crypt(struct blkcipher_desc *desc, long func,
-			 struct s390_xts_ctx *xts_ctx,
+static int xts_aes_crypt(struct blkcipher_desc *desc, unsigned long modifier,
 			 struct blkcipher_walk *walk)
 {
-	unsigned int offset = (xts_ctx->key_len >> 1) & 0x10;
-	int ret = blkcipher_walk_virt(desc, walk);
-	unsigned int nbytes = walk->nbytes;
-	unsigned int n;
-	u8 *in, *out;
-	struct pcc_param pcc_param;
+	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
+	unsigned int offset, nbytes, n;
+	int ret;
+	struct {
+		u8 key[32];
+		u8 tweak[16];
+		u8 block[16];
+		u8 bit[16];
+		u8 xts[16];
+	} pcc_param;
 	struct {
 		u8 key[32];
 		u8 init[16];
 	} xts_param;
 
-	if (!nbytes)
-		goto out;
-
+	ret = blkcipher_walk_virt(desc, walk);
+	offset = xts_ctx->key_len & 0x10;
 	memset(pcc_param.block, 0, sizeof(pcc_param.block));
 	memset(pcc_param.bit, 0, sizeof(pcc_param.bit));
 	memset(pcc_param.xts, 0, sizeof(pcc_param.xts));
 	memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak));
-	memcpy(pcc_param.key, xts_ctx->pcc_key, 32);
-	/* remove decipher modifier bit from 'func' and call PCC */
-	ret = cpacf_pcc(func & 0x7f, &pcc_param.key[offset]);
-	if (ret < 0)
-		return -EIO;
+	memcpy(pcc_param.key + offset, xts_ctx->pcc_key, xts_ctx->key_len);
+	cpacf_pcc(xts_ctx->fc, pcc_param.key + offset);
 
-	memcpy(xts_param.key, xts_ctx->key, 32);
+	memcpy(xts_param.key + offset, xts_ctx->key, xts_ctx->key_len);
 	memcpy(xts_param.init, pcc_param.xts, 16);
-	do {
+
+	while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
 		/* only use complete blocks */
 		n = nbytes & ~(AES_BLOCK_SIZE - 1);
-		out = walk->dst.virt.addr;
-		in = walk->src.virt.addr;
-
-		ret = cpacf_km(func, &xts_param.key[offset], out, in, n);
-		if (ret < 0 || ret != n)
-			return -EIO;
-
-		nbytes &= AES_BLOCK_SIZE - 1;
-		ret = blkcipher_walk_done(desc, walk, nbytes);
-	} while ((nbytes = walk->nbytes));
-out:
+		cpacf_km(xts_ctx->fc | modifier, xts_param.key + offset,
+			 walk->dst.virt.addr, walk->src.virt.addr, n);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
+	}
 	return ret;
 }
 
@@ -681,11 +565,11 @@ static int xts_aes_encrypt(struct blkcipher_desc *desc,
 	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
-	if (unlikely(xts_ctx->key_len == 48))
+	if (unlikely(!xts_ctx->fc))
 		return xts_fallback_encrypt(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return xts_aes_crypt(desc, xts_ctx->enc, xts_ctx, &walk);
+	return xts_aes_crypt(desc, 0, &walk);
 }
 
 static int xts_aes_decrypt(struct blkcipher_desc *desc,
@@ -695,11 +579,11 @@ static int xts_aes_decrypt(struct blkcipher_desc *desc,
 	struct s390_xts_ctx *xts_ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
-	if (unlikely(xts_ctx->key_len == 48))
+	if (unlikely(!xts_ctx->fc))
 		return xts_fallback_decrypt(desc, dst, src, nbytes);
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return xts_aes_crypt(desc, xts_ctx->dec, xts_ctx, &walk);
+	return xts_aes_crypt(desc, CPACF_DECRYPT, &walk);
 }
 
 static int xts_fallback_init(struct crypto_tfm *tfm)
@@ -750,108 +634,79 @@ static struct crypto_alg xts_aes_alg = {
 	}
 };
 
-static int xts_aes_alg_reg;
-
 static int ctr_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 			   unsigned int key_len)
 {
 	struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm);
+	unsigned long fc;
 
-	switch (key_len) {
-	case 16:
-		sctx->enc = CPACF_KMCTR_AES_128_ENC;
-		sctx->dec = CPACF_KMCTR_AES_128_DEC;
-		break;
-	case 24:
-		sctx->enc = CPACF_KMCTR_AES_192_ENC;
-		sctx->dec = CPACF_KMCTR_AES_192_DEC;
-		break;
-	case 32:
-		sctx->enc = CPACF_KMCTR_AES_256_ENC;
-		sctx->dec = CPACF_KMCTR_AES_256_DEC;
-		break;
-	}
+	/* Pick the correct function code based on the key length */
+	fc = (key_len == 16) ? CPACF_KMCTR_AES_128 :
+	     (key_len == 24) ? CPACF_KMCTR_AES_192 :
+	     (key_len == 32) ? CPACF_KMCTR_AES_256 : 0;
+
+	/* Check if the function code is available */
+	sctx->fc = (fc && cpacf_test_func(&kmctr_functions, fc)) ? fc : 0;
+	if (!sctx->fc)
+		return setkey_fallback_blk(tfm, in_key, key_len);
 
-	return aes_set_key(tfm, in_key, key_len);
+	sctx->key_len = key_len;
+	memcpy(sctx->key, in_key, key_len);
+	return 0;
 }
 
-static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+static unsigned int __ctrblk_init(u8 *ctrptr, u8 *iv, unsigned int nbytes)
 {
 	unsigned int i, n;
 
 	/* only use complete blocks, max. PAGE_SIZE */
+	memcpy(ctrptr, iv, AES_BLOCK_SIZE);
 	n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(AES_BLOCK_SIZE - 1);
-	for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
-		memcpy(ctrptr + i, ctrptr + i - AES_BLOCK_SIZE,
-		       AES_BLOCK_SIZE);
-		crypto_inc(ctrptr + i, AES_BLOCK_SIZE);
+	for (i = (n / AES_BLOCK_SIZE) - 1; i > 0; i--) {
+		memcpy(ctrptr + AES_BLOCK_SIZE, ctrptr, AES_BLOCK_SIZE);
+		crypto_inc(ctrptr + AES_BLOCK_SIZE, AES_BLOCK_SIZE);
+		ctrptr += AES_BLOCK_SIZE;
 	}
 	return n;
 }
 
-static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
-			 struct s390_aes_ctx *sctx, struct blkcipher_walk *walk)
+static int ctr_aes_crypt(struct blkcipher_desc *desc, unsigned long modifier,
+			 struct blkcipher_walk *walk)
 {
-	int ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE);
+	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
+	u8 buf[AES_BLOCK_SIZE], *ctrptr;
 	unsigned int n, nbytes;
-	u8 buf[AES_BLOCK_SIZE], ctrbuf[AES_BLOCK_SIZE];
-	u8 *out, *in, *ctrptr = ctrbuf;
-
-	if (!walk->nbytes)
-		return ret;
+	int ret, locked;
 
-	if (spin_trylock(&ctrblk_lock))
-		ctrptr = ctrblk;
+	locked = spin_trylock(&ctrblk_lock);
 
-	memcpy(ctrptr, walk->iv, AES_BLOCK_SIZE);
+	ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE);
 	while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
-		out = walk->dst.virt.addr;
-		in = walk->src.virt.addr;
-		while (nbytes >= AES_BLOCK_SIZE) {
-			if (ctrptr == ctrblk)
-				n = __ctrblk_init(ctrptr, nbytes);
-			else
-				n = AES_BLOCK_SIZE;
-			ret = cpacf_kmctr(func, sctx->key, out, in, n, ctrptr);
-			if (ret < 0 || ret != n) {
-				if (ctrptr == ctrblk)
-					spin_unlock(&ctrblk_lock);
-				return -EIO;
-			}
-			if (n > AES_BLOCK_SIZE)
-				memcpy(ctrptr, ctrptr + n - AES_BLOCK_SIZE,
-				       AES_BLOCK_SIZE);
-			crypto_inc(ctrptr, AES_BLOCK_SIZE);
-			out += n;
-			in += n;
-			nbytes -= n;
-		}
-		ret = blkcipher_walk_done(desc, walk, nbytes);
+		n = AES_BLOCK_SIZE;
+		if (nbytes >= 2*AES_BLOCK_SIZE && locked)
+			n = __ctrblk_init(ctrblk, walk->iv, nbytes);
+		ctrptr = (n > AES_BLOCK_SIZE) ? ctrblk : walk->iv;
+		cpacf_kmctr(sctx->fc | modifier, sctx->key,
+			    walk->dst.virt.addr, walk->src.virt.addr,
+			    n, ctrptr);
+		if (ctrptr == ctrblk)
+			memcpy(walk->iv, ctrptr + n - AES_BLOCK_SIZE,
+			       AES_BLOCK_SIZE);
+		crypto_inc(walk->iv, AES_BLOCK_SIZE);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
 	}
-	if (ctrptr == ctrblk) {
-		if (nbytes)
-			memcpy(ctrbuf, ctrptr, AES_BLOCK_SIZE);
-		else
-			memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
+	if (locked)
 		spin_unlock(&ctrblk_lock);
-	} else {
-		if (!nbytes)
-			memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
-	}
 	/*
 	 * final block may be < AES_BLOCK_SIZE, copy only nbytes
 	 */
 	if (nbytes) {
-		out = walk->dst.virt.addr;
-		in = walk->src.virt.addr;
-		ret = cpacf_kmctr(func, sctx->key, buf, in,
-				  AES_BLOCK_SIZE, ctrbuf);
-		if (ret < 0 || ret != AES_BLOCK_SIZE)
-			return -EIO;
-		memcpy(out, buf, nbytes);
-		crypto_inc(ctrbuf, AES_BLOCK_SIZE);
+		cpacf_kmctr(sctx->fc | modifier, sctx->key,
+			    buf, walk->src.virt.addr,
+			    AES_BLOCK_SIZE, walk->iv);
+		memcpy(walk->dst.virt.addr, buf, nbytes);
+		crypto_inc(walk->iv, AES_BLOCK_SIZE);
 		ret = blkcipher_walk_done(desc, walk, 0);
-		memcpy(walk->iv, ctrbuf, AES_BLOCK_SIZE);
 	}
 
 	return ret;
@@ -864,8 +719,11 @@ static int ctr_aes_encrypt(struct blkcipher_desc *desc,
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
+	if (unlikely(!sctx->fc))
+		return fallback_blk_enc(desc, dst, src, nbytes);
+
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ctr_aes_crypt(desc, sctx->enc, sctx, &walk);
+	return ctr_aes_crypt(desc, 0, &walk);
 }
 
 static int ctr_aes_decrypt(struct blkcipher_desc *desc,
@@ -875,19 +733,25 @@ static int ctr_aes_decrypt(struct blkcipher_desc *desc,
 	struct s390_aes_ctx *sctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
+	if (unlikely(!sctx->fc))
+		return fallback_blk_dec(desc, dst, src, nbytes);
+
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ctr_aes_crypt(desc, sctx->dec, sctx, &walk);
+	return ctr_aes_crypt(desc, CPACF_DECRYPT, &walk);
 }
 
 static struct crypto_alg ctr_aes_alg = {
 	.cra_name		=	"ctr(aes)",
 	.cra_driver_name	=	"ctr-aes-s390",
 	.cra_priority		=	400,	/* combo: aes + ctr */
-	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER,
+	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER |
+					CRYPTO_ALG_NEED_FALLBACK,
 	.cra_blocksize		=	1,
 	.cra_ctxsize		=	sizeof(struct s390_aes_ctx),
 	.cra_type		=	&crypto_blkcipher_type,
 	.cra_module		=	THIS_MODULE,
+	.cra_init		=	fallback_init_blk,
+	.cra_exit		=	fallback_exit_blk,
 	.cra_u			=	{
 		.blkcipher = {
 			.min_keysize		=	AES_MIN_KEY_SIZE,
@@ -900,89 +764,79 @@ static struct crypto_alg ctr_aes_alg = {
 	}
 };
 
-static int ctr_aes_alg_reg;
+static struct crypto_alg *aes_s390_algs_ptr[5];
+static int aes_s390_algs_num;
 
-static int __init aes_s390_init(void)
+static int aes_s390_register_alg(struct crypto_alg *alg)
 {
 	int ret;
 
-	if (cpacf_query(CPACF_KM, CPACF_KM_AES_128_ENC))
-		keylen_flag |= AES_KEYLEN_128;
-	if (cpacf_query(CPACF_KM, CPACF_KM_AES_192_ENC))
-		keylen_flag |= AES_KEYLEN_192;
-	if (cpacf_query(CPACF_KM, CPACF_KM_AES_256_ENC))
-		keylen_flag |= AES_KEYLEN_256;
+	ret = crypto_register_alg(alg);
+	if (!ret)
+		aes_s390_algs_ptr[aes_s390_algs_num++] = alg;
+	return ret;
+}
 
-	if (!keylen_flag)
-		return -EOPNOTSUPP;
+static void aes_s390_fini(void)
+{
+	while (aes_s390_algs_num--)
+		crypto_unregister_alg(aes_s390_algs_ptr[aes_s390_algs_num]);
+	if (ctrblk)
+		free_page((unsigned long) ctrblk);
+}
 
-	/* z9 109 and z9 BC/EC only support 128 bit key length */
-	if (keylen_flag == AES_KEYLEN_128)
-		pr_info("AES hardware acceleration is only available for"
-			" 128-bit keys\n");
+static int __init aes_s390_init(void)
+{
+	int ret;
 
-	ret = crypto_register_alg(&aes_alg);
-	if (ret)
-		goto aes_err;
+	/* Query available functions for KM, KMC and KMCTR */
+	cpacf_query(CPACF_KM, &km_functions);
+	cpacf_query(CPACF_KMC, &kmc_functions);
+	cpacf_query(CPACF_KMCTR, &kmctr_functions);
 
-	ret = crypto_register_alg(&ecb_aes_alg);
-	if (ret)
-		goto ecb_aes_err;
+	if (cpacf_test_func(&km_functions, CPACF_KM_AES_128) ||
+	    cpacf_test_func(&km_functions, CPACF_KM_AES_192) ||
+	    cpacf_test_func(&km_functions, CPACF_KM_AES_256)) {
+		ret = aes_s390_register_alg(&aes_alg);
+		if (ret)
+			goto out_err;
+		ret = aes_s390_register_alg(&ecb_aes_alg);
+		if (ret)
+			goto out_err;
+	}
 
-	ret = crypto_register_alg(&cbc_aes_alg);
-	if (ret)
-		goto cbc_aes_err;
+	if (cpacf_test_func(&kmc_functions, CPACF_KMC_AES_128) ||
+	    cpacf_test_func(&kmc_functions, CPACF_KMC_AES_192) ||
+	    cpacf_test_func(&kmc_functions, CPACF_KMC_AES_256)) {
+		ret = aes_s390_register_alg(&cbc_aes_alg);
+		if (ret)
+			goto out_err;
+	}
 
-	if (cpacf_query(CPACF_KM, CPACF_KM_XTS_128_ENC) &&
-	    cpacf_query(CPACF_KM, CPACF_KM_XTS_256_ENC)) {
-		ret = crypto_register_alg(&xts_aes_alg);
+	if (cpacf_test_func(&km_functions, CPACF_KM_XTS_128) ||
+	    cpacf_test_func(&km_functions, CPACF_KM_XTS_256)) {
+		ret = aes_s390_register_alg(&xts_aes_alg);
 		if (ret)
-			goto xts_aes_err;
-		xts_aes_alg_reg = 1;
+			goto out_err;
 	}
 
-	if (cpacf_query(CPACF_KMCTR, CPACF_KMCTR_AES_128_ENC) &&
-	    cpacf_query(CPACF_KMCTR, CPACF_KMCTR_AES_192_ENC) &&
-	    cpacf_query(CPACF_KMCTR, CPACF_KMCTR_AES_256_ENC)) {
+	if (cpacf_test_func(&kmctr_functions, CPACF_KMCTR_AES_128) ||
+	    cpacf_test_func(&kmctr_functions, CPACF_KMCTR_AES_192) ||
+	    cpacf_test_func(&kmctr_functions, CPACF_KMCTR_AES_256)) {
 		ctrblk = (u8 *) __get_free_page(GFP_KERNEL);
 		if (!ctrblk) {
 			ret = -ENOMEM;
-			goto ctr_aes_err;
+			goto out_err;
 		}
-		ret = crypto_register_alg(&ctr_aes_alg);
-		if (ret) {
-			free_page((unsigned long) ctrblk);
-			goto ctr_aes_err;
-		}
-		ctr_aes_alg_reg = 1;
+		ret = aes_s390_register_alg(&ctr_aes_alg);
+		if (ret)
+			goto out_err;
 	}
 
-out:
+	return 0;
+out_err:
+	aes_s390_fini();
 	return ret;
-
-ctr_aes_err:
-	crypto_unregister_alg(&xts_aes_alg);
-xts_aes_err:
-	crypto_unregister_alg(&cbc_aes_alg);
-cbc_aes_err:
-	crypto_unregister_alg(&ecb_aes_alg);
-ecb_aes_err:
-	crypto_unregister_alg(&aes_alg);
-aes_err:
-	goto out;
-}
-
-static void __exit aes_s390_fini(void)
-{
-	if (ctr_aes_alg_reg) {
-		crypto_unregister_alg(&ctr_aes_alg);
-		free_page((unsigned long) ctrblk);
-	}
-	if (xts_aes_alg_reg)
-		crypto_unregister_alg(&xts_aes_alg);
-	crypto_unregister_alg(&cbc_aes_alg);
-	crypto_unregister_alg(&ecb_aes_alg);
-	crypto_unregister_alg(&aes_alg);
 }
 
 module_cpu_feature_match(MSA, aes_s390_init);
diff --git a/arch/s390/crypto/crc32-vx.c b/arch/s390/crypto/crc32-vx.c
index 2bad9d8..992e630 100644
--- a/arch/s390/crypto/crc32-vx.c
+++ b/arch/s390/crypto/crc32-vx.c
@@ -67,7 +67,7 @@ u32 crc32c_le_vgfm_16(u32 crc, unsigned char const *buf, size_t size);
 									    \
 		kernel_fpu_begin(&vxstate, KERNEL_VXR_LOW);		    \
 		crc = ___crc32_vx(crc, data, aligned);			    \
-		kernel_fpu_end(&vxstate);				    \
+		kernel_fpu_end(&vxstate, KERNEL_VXR_LOW);		    \
 									    \
 		if (remaining)						    \
 			crc = ___crc32_sw(crc, data + aligned, remaining);  \
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 697e71a..8b83144 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -27,6 +27,8 @@
 static u8 *ctrblk;
 static DEFINE_SPINLOCK(ctrblk_lock);
 
+static cpacf_mask_t km_functions, kmc_functions, kmctr_functions;
+
 struct s390_des_ctx {
 	u8 iv[DES_BLOCK_SIZE];
 	u8 key[DES3_KEY_SIZE];
@@ -36,12 +38,12 @@ static int des_setkey(struct crypto_tfm *tfm, const u8 *key,
 		      unsigned int key_len)
 {
 	struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
 	u32 tmp[DES_EXPKEY_WORDS];
 
 	/* check for weak keys */
-	if (!des_ekey(tmp, key) && (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
-		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+	if (!des_ekey(tmp, key) &&
+	    (tfm->crt_flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
 
@@ -53,14 +55,15 @@ static void des_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
 
-	cpacf_km(CPACF_KM_DEA_ENC, ctx->key, out, in, DES_BLOCK_SIZE);
+	cpacf_km(CPACF_KM_DEA, ctx->key, out, in, DES_BLOCK_SIZE);
 }
 
 static void des_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 {
 	struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
 
-	cpacf_km(CPACF_KM_DEA_DEC, ctx->key, out, in, DES_BLOCK_SIZE);
+	cpacf_km(CPACF_KM_DEA | CPACF_DECRYPT,
+		 ctx->key, out, in, DES_BLOCK_SIZE);
 }
 
 static struct crypto_alg des_alg = {
@@ -82,61 +85,46 @@ static struct crypto_alg des_alg = {
 	}
 };
 
-static int ecb_desall_crypt(struct blkcipher_desc *desc, long func,
-			    u8 *key, struct blkcipher_walk *walk)
+static int ecb_desall_crypt(struct blkcipher_desc *desc, unsigned long fc,
+			    struct blkcipher_walk *walk)
 {
-	int ret = blkcipher_walk_virt(desc, walk);
-	unsigned int nbytes;
+	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	unsigned int nbytes, n;
+	int ret;
 
-	while ((nbytes = walk->nbytes)) {
+	ret = blkcipher_walk_virt(desc, walk);
+	while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
 		/* only use complete blocks */
-		unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
-		u8 *out = walk->dst.virt.addr;
-		u8 *in = walk->src.virt.addr;
-
-		ret = cpacf_km(func, key, out, in, n);
-		if (ret < 0 || ret != n)
-			return -EIO;
-
-		nbytes &= DES_BLOCK_SIZE - 1;
-		ret = blkcipher_walk_done(desc, walk, nbytes);
+		n = nbytes & ~(DES_BLOCK_SIZE - 1);
+		cpacf_km(fc, ctx->key, walk->dst.virt.addr,
+			 walk->src.virt.addr, n);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
 	}
-
 	return ret;
 }
 
-static int cbc_desall_crypt(struct blkcipher_desc *desc, long func,
+static int cbc_desall_crypt(struct blkcipher_desc *desc, unsigned long fc,
 			    struct blkcipher_walk *walk)
 {
 	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	int ret = blkcipher_walk_virt(desc, walk);
-	unsigned int nbytes = walk->nbytes;
+	unsigned int nbytes, n;
+	int ret;
 	struct {
 		u8 iv[DES_BLOCK_SIZE];
 		u8 key[DES3_KEY_SIZE];
 	} param;
 
-	if (!nbytes)
-		goto out;
-
+	ret = blkcipher_walk_virt(desc, walk);
 	memcpy(param.iv, walk->iv, DES_BLOCK_SIZE);
 	memcpy(param.key, ctx->key, DES3_KEY_SIZE);
-	do {
+	while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
 		/* only use complete blocks */
-		unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
-		u8 *out = walk->dst.virt.addr;
-		u8 *in = walk->src.virt.addr;
-
-		ret = cpacf_kmc(func, &param, out, in, n);
-		if (ret < 0 || ret != n)
-			return -EIO;
-
-		nbytes &= DES_BLOCK_SIZE - 1;
-		ret = blkcipher_walk_done(desc, walk, nbytes);
-	} while ((nbytes = walk->nbytes));
+		n = nbytes & ~(DES_BLOCK_SIZE - 1);
+		cpacf_kmc(fc, &param, walk->dst.virt.addr,
+			  walk->src.virt.addr, n);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
+	}
 	memcpy(walk->iv, param.iv, DES_BLOCK_SIZE);
-
-out:
 	return ret;
 }
 
@@ -144,22 +132,20 @@ static int ecb_des_encrypt(struct blkcipher_desc *desc,
 			   struct scatterlist *dst, struct scatterlist *src,
 			   unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ecb_desall_crypt(desc, CPACF_KM_DEA_ENC, ctx->key, &walk);
+	return ecb_desall_crypt(desc, CPACF_KM_DEA, &walk);
 }
 
 static int ecb_des_decrypt(struct blkcipher_desc *desc,
 			   struct scatterlist *dst, struct scatterlist *src,
 			   unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ecb_desall_crypt(desc, CPACF_KM_DEA_DEC, ctx->key, &walk);
+	return ecb_desall_crypt(desc, CPACF_KM_DEA | CPACF_DECRYPT, &walk);
 }
 
 static struct crypto_alg ecb_des_alg = {
@@ -189,7 +175,7 @@ static int cbc_des_encrypt(struct blkcipher_desc *desc,
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_desall_crypt(desc, CPACF_KMC_DEA_ENC, &walk);
+	return cbc_desall_crypt(desc, CPACF_KMC_DEA, &walk);
 }
 
 static int cbc_des_decrypt(struct blkcipher_desc *desc,
@@ -199,7 +185,7 @@ static int cbc_des_decrypt(struct blkcipher_desc *desc,
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_desall_crypt(desc, CPACF_KMC_DEA_DEC, &walk);
+	return cbc_desall_crypt(desc, CPACF_KMC_DEA | CPACF_DECRYPT, &walk);
 }
 
 static struct crypto_alg cbc_des_alg = {
@@ -240,13 +226,12 @@ static int des3_setkey(struct crypto_tfm *tfm, const u8 *key,
 		       unsigned int key_len)
 {
 	struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
 
 	if (!(crypto_memneq(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
 	    crypto_memneq(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
 			  DES_KEY_SIZE)) &&
-	    (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
-		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
+	    (tfm->crt_flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		tfm->crt_flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
 	memcpy(ctx->key, key, key_len);
@@ -257,14 +242,15 @@ static void des3_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
 
-	cpacf_km(CPACF_KM_TDEA_192_ENC, ctx->key, dst, src, DES_BLOCK_SIZE);
+	cpacf_km(CPACF_KM_TDEA_192, ctx->key, dst, src, DES_BLOCK_SIZE);
 }
 
 static void des3_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct s390_des_ctx *ctx = crypto_tfm_ctx(tfm);
 
-	cpacf_km(CPACF_KM_TDEA_192_DEC, ctx->key, dst, src, DES_BLOCK_SIZE);
+	cpacf_km(CPACF_KM_TDEA_192 | CPACF_DECRYPT,
+		 ctx->key, dst, src, DES_BLOCK_SIZE);
 }
 
 static struct crypto_alg des3_alg = {
@@ -290,22 +276,21 @@ static int ecb_des3_encrypt(struct blkcipher_desc *desc,
 			    struct scatterlist *dst, struct scatterlist *src,
 			    unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ecb_desall_crypt(desc, CPACF_KM_TDEA_192_ENC, ctx->key, &walk);
+	return ecb_desall_crypt(desc, CPACF_KM_TDEA_192, &walk);
 }
 
 static int ecb_des3_decrypt(struct blkcipher_desc *desc,
 			    struct scatterlist *dst, struct scatterlist *src,
 			    unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ecb_desall_crypt(desc, CPACF_KM_TDEA_192_DEC, ctx->key, &walk);
+	return ecb_desall_crypt(desc, CPACF_KM_TDEA_192 | CPACF_DECRYPT,
+				&walk);
 }
 
 static struct crypto_alg ecb_des3_alg = {
@@ -335,7 +320,7 @@ static int cbc_des3_encrypt(struct blkcipher_desc *desc,
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_desall_crypt(desc, CPACF_KMC_TDEA_192_ENC, &walk);
+	return cbc_desall_crypt(desc, CPACF_KMC_TDEA_192, &walk);
 }
 
 static int cbc_des3_decrypt(struct blkcipher_desc *desc,
@@ -345,7 +330,8 @@ static int cbc_des3_decrypt(struct blkcipher_desc *desc,
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return cbc_desall_crypt(desc, CPACF_KMC_TDEA_192_DEC, &walk);
+	return cbc_desall_crypt(desc, CPACF_KMC_TDEA_192 | CPACF_DECRYPT,
+				&walk);
 }
 
 static struct crypto_alg cbc_des3_alg = {
@@ -369,81 +355,54 @@ static struct crypto_alg cbc_des3_alg = {
 	}
 };
 
-static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+static unsigned int __ctrblk_init(u8 *ctrptr, u8 *iv, unsigned int nbytes)
 {
 	unsigned int i, n;
 
 	/* align to block size, max. PAGE_SIZE */
 	n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(DES_BLOCK_SIZE - 1);
-	for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
-		memcpy(ctrptr + i, ctrptr + i - DES_BLOCK_SIZE, DES_BLOCK_SIZE);
-		crypto_inc(ctrptr + i, DES_BLOCK_SIZE);
+	memcpy(ctrptr, iv, DES_BLOCK_SIZE);
+	for (i = (n / DES_BLOCK_SIZE) - 1; i > 0; i--) {
+		memcpy(ctrptr + DES_BLOCK_SIZE, ctrptr, DES_BLOCK_SIZE);
+		crypto_inc(ctrptr + DES_BLOCK_SIZE, DES_BLOCK_SIZE);
+		ctrptr += DES_BLOCK_SIZE;
 	}
 	return n;
 }
 
-static int ctr_desall_crypt(struct blkcipher_desc *desc, long func,
-			    struct s390_des_ctx *ctx,
+static int ctr_desall_crypt(struct blkcipher_desc *desc, unsigned long fc,
 			    struct blkcipher_walk *walk)
 {
-	int ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE);
+	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+	u8 buf[DES_BLOCK_SIZE], *ctrptr;
 	unsigned int n, nbytes;
-	u8 buf[DES_BLOCK_SIZE], ctrbuf[DES_BLOCK_SIZE];
-	u8 *out, *in, *ctrptr = ctrbuf;
-
-	if (!walk->nbytes)
-		return ret;
+	int ret, locked;
 
-	if (spin_trylock(&ctrblk_lock))
-		ctrptr = ctrblk;
+	locked = spin_trylock(&ctrblk_lock);
 
-	memcpy(ctrptr, walk->iv, DES_BLOCK_SIZE);
+	ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE);
 	while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
-		out = walk->dst.virt.addr;
-		in = walk->src.virt.addr;
-		while (nbytes >= DES_BLOCK_SIZE) {
-			if (ctrptr == ctrblk)
-				n = __ctrblk_init(ctrptr, nbytes);
-			else
-				n = DES_BLOCK_SIZE;
-			ret = cpacf_kmctr(func, ctx->key, out, in, n, ctrptr);
-			if (ret < 0 || ret != n) {
-				if (ctrptr == ctrblk)
-					spin_unlock(&ctrblk_lock);
-				return -EIO;
-			}
-			if (n > DES_BLOCK_SIZE)
-				memcpy(ctrptr, ctrptr + n - DES_BLOCK_SIZE,
-				       DES_BLOCK_SIZE);
-			crypto_inc(ctrptr, DES_BLOCK_SIZE);
-			out += n;
-			in += n;
-			nbytes -= n;
-		}
-		ret = blkcipher_walk_done(desc, walk, nbytes);
+		n = DES_BLOCK_SIZE;
+		if (nbytes >= 2*DES_BLOCK_SIZE && locked)
+			n = __ctrblk_init(ctrblk, walk->iv, nbytes);
+		ctrptr = (n > DES_BLOCK_SIZE) ? ctrblk : walk->iv;
+		cpacf_kmctr(fc, ctx->key, walk->dst.virt.addr,
+			    walk->src.virt.addr, n, ctrptr);
+		if (ctrptr == ctrblk)
+			memcpy(walk->iv, ctrptr + n - DES_BLOCK_SIZE,
+				DES_BLOCK_SIZE);
+		crypto_inc(walk->iv, DES_BLOCK_SIZE);
+		ret = blkcipher_walk_done(desc, walk, nbytes - n);
 	}
-	if (ctrptr == ctrblk) {
-		if (nbytes)
-			memcpy(ctrbuf, ctrptr, DES_BLOCK_SIZE);
-		else
-			memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
+	if (locked)
 		spin_unlock(&ctrblk_lock);
-	} else {
-		if (!nbytes)
-			memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
-	}
 	/* final block may be < DES_BLOCK_SIZE, copy only nbytes */
 	if (nbytes) {
-		out = walk->dst.virt.addr;
-		in = walk->src.virt.addr;
-		ret = cpacf_kmctr(func, ctx->key, buf, in,
-				  DES_BLOCK_SIZE, ctrbuf);
-		if (ret < 0 || ret != DES_BLOCK_SIZE)
-			return -EIO;
-		memcpy(out, buf, nbytes);
-		crypto_inc(ctrbuf, DES_BLOCK_SIZE);
+		cpacf_kmctr(fc, ctx->key, buf, walk->src.virt.addr,
+			    DES_BLOCK_SIZE, walk->iv);
+		memcpy(walk->dst.virt.addr, buf, nbytes);
+		crypto_inc(walk->iv, DES_BLOCK_SIZE);
 		ret = blkcipher_walk_done(desc, walk, 0);
-		memcpy(walk->iv, ctrbuf, DES_BLOCK_SIZE);
 	}
 	return ret;
 }
@@ -452,22 +411,20 @@ static int ctr_des_encrypt(struct blkcipher_desc *desc,
 			   struct scatterlist *dst, struct scatterlist *src,
 			   unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ctr_desall_crypt(desc, CPACF_KMCTR_DEA_ENC, ctx, &walk);
+	return ctr_desall_crypt(desc, CPACF_KMCTR_DEA, &walk);
 }
 
 static int ctr_des_decrypt(struct blkcipher_desc *desc,
 			   struct scatterlist *dst, struct scatterlist *src,
 			   unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ctr_desall_crypt(desc, CPACF_KMCTR_DEA_DEC, ctx, &walk);
+	return ctr_desall_crypt(desc, CPACF_KMCTR_DEA | CPACF_DECRYPT, &walk);
 }
 
 static struct crypto_alg ctr_des_alg = {
@@ -495,22 +452,21 @@ static int ctr_des3_encrypt(struct blkcipher_desc *desc,
 			    struct scatterlist *dst, struct scatterlist *src,
 			    unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ctr_desall_crypt(desc, CPACF_KMCTR_TDEA_192_ENC, ctx, &walk);
+	return ctr_desall_crypt(desc, CPACF_KMCTR_TDEA_192, &walk);
 }
 
 static int ctr_des3_decrypt(struct blkcipher_desc *desc,
 			    struct scatterlist *dst, struct scatterlist *src,
 			    unsigned int nbytes)
 {
-	struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
 	struct blkcipher_walk walk;
 
 	blkcipher_walk_init(&walk, dst, src, nbytes);
-	return ctr_desall_crypt(desc, CPACF_KMCTR_TDEA_192_DEC, ctx, &walk);
+	return ctr_desall_crypt(desc, CPACF_KMCTR_TDEA_192 | CPACF_DECRYPT,
+				&walk);
 }
 
 static struct crypto_alg ctr_des3_alg = {
@@ -534,83 +490,87 @@ static struct crypto_alg ctr_des3_alg = {
 	}
 };
 
+static struct crypto_alg *des_s390_algs_ptr[8];
+static int des_s390_algs_num;
+
+static int des_s390_register_alg(struct crypto_alg *alg)
+{
+	int ret;
+
+	ret = crypto_register_alg(alg);
+	if (!ret)
+		des_s390_algs_ptr[des_s390_algs_num++] = alg;
+	return ret;
+}
+
+static void des_s390_exit(void)
+{
+	while (des_s390_algs_num--)
+		crypto_unregister_alg(des_s390_algs_ptr[des_s390_algs_num]);
+	if (ctrblk)
+		free_page((unsigned long) ctrblk);
+}
+
 static int __init des_s390_init(void)
 {
 	int ret;
 
-	if (!cpacf_query(CPACF_KM, CPACF_KM_DEA_ENC) ||
-	    !cpacf_query(CPACF_KM, CPACF_KM_TDEA_192_ENC))
-		return -EOPNOTSUPP;
-
-	ret = crypto_register_alg(&des_alg);
-	if (ret)
-		goto des_err;
-	ret = crypto_register_alg(&ecb_des_alg);
-	if (ret)
-		goto ecb_des_err;
-	ret = crypto_register_alg(&cbc_des_alg);
-	if (ret)
-		goto cbc_des_err;
-	ret = crypto_register_alg(&des3_alg);
-	if (ret)
-		goto des3_err;
-	ret = crypto_register_alg(&ecb_des3_alg);
-	if (ret)
-		goto ecb_des3_err;
-	ret = crypto_register_alg(&cbc_des3_alg);
-	if (ret)
-		goto cbc_des3_err;
-
-	if (cpacf_query(CPACF_KMCTR, CPACF_KMCTR_DEA_ENC) &&
-	    cpacf_query(CPACF_KMCTR, CPACF_KMCTR_TDEA_192_ENC)) {
-		ret = crypto_register_alg(&ctr_des_alg);
+	/* Query available functions for KM, KMC and KMCTR */
+	cpacf_query(CPACF_KM, &km_functions);
+	cpacf_query(CPACF_KMC, &kmc_functions);
+	cpacf_query(CPACF_KMCTR, &kmctr_functions);
+
+	if (cpacf_test_func(&km_functions, CPACF_KM_DEA)) {
+		ret = des_s390_register_alg(&des_alg);
+		if (ret)
+			goto out_err;
+		ret = des_s390_register_alg(&ecb_des_alg);
 		if (ret)
-			goto ctr_des_err;
-		ret = crypto_register_alg(&ctr_des3_alg);
+			goto out_err;
+	}
+	if (cpacf_test_func(&kmc_functions, CPACF_KMC_DEA)) {
+		ret = des_s390_register_alg(&cbc_des_alg);
 		if (ret)
-			goto ctr_des3_err;
+			goto out_err;
+	}
+	if (cpacf_test_func(&km_functions, CPACF_KM_TDEA_192)) {
+		ret = des_s390_register_alg(&des3_alg);
+		if (ret)
+			goto out_err;
+		ret = des_s390_register_alg(&ecb_des3_alg);
+		if (ret)
+			goto out_err;
+	}
+	if (cpacf_test_func(&kmc_functions, CPACF_KMC_TDEA_192)) {
+		ret = des_s390_register_alg(&cbc_des3_alg);
+		if (ret)
+			goto out_err;
+	}
+
+	if (cpacf_test_func(&kmctr_functions, CPACF_KMCTR_DEA) ||
+	    cpacf_test_func(&kmctr_functions, CPACF_KMCTR_TDEA_192)) {
 		ctrblk = (u8 *) __get_free_page(GFP_KERNEL);
 		if (!ctrblk) {
 			ret = -ENOMEM;
-			goto ctr_mem_err;
+			goto out_err;
 		}
 	}
-out:
-	return ret;
 
-ctr_mem_err:
-	crypto_unregister_alg(&ctr_des3_alg);
-ctr_des3_err:
-	crypto_unregister_alg(&ctr_des_alg);
-ctr_des_err:
-	crypto_unregister_alg(&cbc_des3_alg);
-cbc_des3_err:
-	crypto_unregister_alg(&ecb_des3_alg);
-ecb_des3_err:
-	crypto_unregister_alg(&des3_alg);
-des3_err:
-	crypto_unregister_alg(&cbc_des_alg);
-cbc_des_err:
-	crypto_unregister_alg(&ecb_des_alg);
-ecb_des_err:
-	crypto_unregister_alg(&des_alg);
-des_err:
-	goto out;
-}
-
-static void __exit des_s390_exit(void)
-{
-	if (ctrblk) {
-		crypto_unregister_alg(&ctr_des_alg);
-		crypto_unregister_alg(&ctr_des3_alg);
-		free_page((unsigned long) ctrblk);
+	if (cpacf_test_func(&kmctr_functions, CPACF_KMCTR_DEA)) {
+		ret = des_s390_register_alg(&ctr_des_alg);
+		if (ret)
+			goto out_err;
+	}
+	if (cpacf_test_func(&kmctr_functions, CPACF_KMCTR_TDEA_192)) {
+		ret = des_s390_register_alg(&ctr_des3_alg);
+		if (ret)
+			goto out_err;
 	}
-	crypto_unregister_alg(&cbc_des3_alg);
-	crypto_unregister_alg(&ecb_des3_alg);
-	crypto_unregister_alg(&des3_alg);
-	crypto_unregister_alg(&cbc_des_alg);
-	crypto_unregister_alg(&ecb_des_alg);
-	crypto_unregister_alg(&des_alg);
+
+	return 0;
+out_err:
+	des_s390_exit();
+	return ret;
 }
 
 module_cpu_feature_match(MSA, des_s390_init);
diff --git a/arch/s390/crypto/ghash_s390.c b/arch/s390/crypto/ghash_s390.c
index ab68de7..564616d 100644
--- a/arch/s390/crypto/ghash_s390.c
+++ b/arch/s390/crypto/ghash_s390.c
@@ -58,7 +58,6 @@ static int ghash_update(struct shash_desc *desc,
 	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
 	unsigned int n;
 	u8 *buf = dctx->buffer;
-	int ret;
 
 	if (dctx->bytes) {
 		u8 *pos = buf + (GHASH_BLOCK_SIZE - dctx->bytes);
@@ -71,18 +70,14 @@ static int ghash_update(struct shash_desc *desc,
 		src += n;
 
 		if (!dctx->bytes) {
-			ret = cpacf_kimd(CPACF_KIMD_GHASH, dctx, buf,
-					 GHASH_BLOCK_SIZE);
-			if (ret != GHASH_BLOCK_SIZE)
-				return -EIO;
+			cpacf_kimd(CPACF_KIMD_GHASH, dctx, buf,
+				   GHASH_BLOCK_SIZE);
 		}
 	}
 
 	n = srclen & ~(GHASH_BLOCK_SIZE - 1);
 	if (n) {
-		ret = cpacf_kimd(CPACF_KIMD_GHASH, dctx, src, n);
-		if (ret != n)
-			return -EIO;
+		cpacf_kimd(CPACF_KIMD_GHASH, dctx, src, n);
 		src += n;
 		srclen -= n;
 	}
@@ -98,17 +93,12 @@ static int ghash_update(struct shash_desc *desc,
 static int ghash_flush(struct ghash_desc_ctx *dctx)
 {
 	u8 *buf = dctx->buffer;
-	int ret;
 
 	if (dctx->bytes) {
 		u8 *pos = buf + (GHASH_BLOCK_SIZE - dctx->bytes);
 
 		memset(pos, 0, dctx->bytes);
-
-		ret = cpacf_kimd(CPACF_KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE);
-		if (ret != GHASH_BLOCK_SIZE)
-			return -EIO;
-
+		cpacf_kimd(CPACF_KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE);
 		dctx->bytes = 0;
 	}
 
@@ -146,7 +136,7 @@ static struct shash_alg ghash_alg = {
 
 static int __init ghash_mod_init(void)
 {
-	if (!cpacf_query(CPACF_KIMD, CPACF_KIMD_GHASH))
+	if (!cpacf_query_func(CPACF_KIMD, CPACF_KIMD_GHASH))
 		return -EOPNOTSUPP;
 
 	return crypto_register_shash(&ghash_alg);
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index 41527b1..9cc050f 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -135,12 +135,7 @@ static int generate_entropy(u8 *ebuf, size_t nbytes)
 		else
 			h = ebuf;
 		/* generate sha256 from this page */
-		if (cpacf_kimd(CPACF_KIMD_SHA_256, h,
-			       pg, PAGE_SIZE) != PAGE_SIZE) {
-			prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
-			ret = -EIO;
-			goto out;
-		}
+		cpacf_kimd(CPACF_KIMD_SHA_256, h, pg, PAGE_SIZE);
 		if (n < sizeof(hash))
 			memcpy(ebuf, hash, n);
 		ret += n;
@@ -148,7 +143,6 @@ static int generate_entropy(u8 *ebuf, size_t nbytes)
 		nbytes -= n;
 	}
 
-out:
 	free_page((unsigned long)pg);
 	return ret;
 }
@@ -160,13 +154,11 @@ static void prng_tdes_add_entropy(void)
 {
 	__u64 entropy[4];
 	unsigned int i;
-	int ret;
 
 	for (i = 0; i < 16; i++) {
-		ret = cpacf_kmc(CPACF_KMC_PRNG, prng_data->prngws.parm_block,
-				(char *)entropy, (char *)entropy,
-				sizeof(entropy));
-		BUG_ON(ret < 0 || ret != sizeof(entropy));
+		cpacf_kmc(CPACF_KMC_PRNG, prng_data->prngws.parm_block,
+			  (char *) entropy, (char *) entropy,
+			  sizeof(entropy));
 		memcpy(prng_data->prngws.parm_block, entropy, sizeof(entropy));
 	}
 }
@@ -303,21 +295,14 @@ static int __init prng_sha512_selftest(void)
 		0x21, 0xe4, 0xb0, 0x86, 0x44, 0xf6, 0x72, 0x7c,
 		0x36, 0x8c, 0x5a, 0x9f, 0x7a, 0x4b, 0x3e, 0xe2 };
 
-	int ret = 0;
 	u8 buf[sizeof(random)];
 	struct ppno_ws_s ws;
 
 	memset(&ws, 0, sizeof(ws));
 
 	/* initial seed */
-	ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_SEED, &ws, NULL, 0,
-			 seed, sizeof(seed));
-	if (ret < 0) {
-		pr_err("The prng self test seed operation for the "
-		       "SHA-512 mode failed with rc=%d\n", ret);
-		prng_errorflag = PRNG_SELFTEST_FAILED;
-		return -EIO;
-	}
+	cpacf_ppno(CPACF_PPNO_SHA512_DRNG_SEED,
+		   &ws, NULL, 0, seed, sizeof(seed));
 
 	/* check working states V and C */
 	if (memcmp(ws.V, V0, sizeof(V0)) != 0
@@ -329,22 +314,10 @@ static int __init prng_sha512_selftest(void)
 	}
 
 	/* generate random bytes */
-	ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
-			 &ws, buf, sizeof(buf), NULL, 0);
-	if (ret < 0) {
-		pr_err("The prng self test generate operation for "
-		       "the SHA-512 mode failed with rc=%d\n", ret);
-		prng_errorflag = PRNG_SELFTEST_FAILED;
-		return -EIO;
-	}
-	ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
-			 &ws, buf, sizeof(buf), NULL, 0);
-	if (ret < 0) {
-		pr_err("The prng self test generate operation for "
-		       "the SHA-512 mode failed with rc=%d\n", ret);
-		prng_errorflag = PRNG_SELFTEST_FAILED;
-		return -EIO;
-	}
+	cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
+		   &ws, buf, sizeof(buf), NULL, 0);
+	cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
+		   &ws, buf, sizeof(buf), NULL, 0);
 
 	/* check against expected data */
 	if (memcmp(buf, random, sizeof(random)) != 0) {
@@ -392,26 +365,16 @@ static int __init prng_sha512_instantiate(void)
 	get_tod_clock_ext(seed + 48);
 
 	/* initial seed of the ppno drng */
-	ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_SEED,
-			 &prng_data->ppnows, NULL, 0, seed, sizeof(seed));
-	if (ret < 0) {
-		prng_errorflag = PRNG_SEED_FAILED;
-		ret = -EIO;
-		goto outfree;
-	}
+	cpacf_ppno(CPACF_PPNO_SHA512_DRNG_SEED,
+		   &prng_data->ppnows, NULL, 0, seed, sizeof(seed));
 
 	/* if fips mode is enabled, generate a first block of random
 	   bytes for the FIPS 140-2 Conditional Self Test */
 	if (fips_enabled) {
 		prng_data->prev = prng_data->buf + prng_chunk_size;
-		ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
-				 &prng_data->ppnows,
-				 prng_data->prev, prng_chunk_size, NULL, 0);
-		if (ret < 0 || ret != prng_chunk_size) {
-			prng_errorflag = PRNG_GEN_FAILED;
-			ret = -EIO;
-			goto outfree;
-		}
+		cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
+			   &prng_data->ppnows,
+			   prng_data->prev, prng_chunk_size, NULL, 0);
 	}
 
 	return 0;
@@ -440,12 +403,8 @@ static int prng_sha512_reseed(void)
 		return ret;
 
 	/* do a reseed of the ppno drng with this bytestring */
-	ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_SEED,
-			 &prng_data->ppnows, NULL, 0, seed, sizeof(seed));
-	if (ret) {
-		prng_errorflag = PRNG_RESEED_FAILED;
-		return -EIO;
-	}
+	cpacf_ppno(CPACF_PPNO_SHA512_DRNG_SEED,
+		   &prng_data->ppnows, NULL, 0, seed, sizeof(seed));
 
 	return 0;
 }
@@ -463,12 +422,8 @@ static int prng_sha512_generate(u8 *buf, size_t nbytes)
 	}
 
 	/* PPNO generate */
-	ret = cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
-			 &prng_data->ppnows, buf, nbytes, NULL, 0);
-	if (ret < 0 || ret != nbytes) {
-		prng_errorflag = PRNG_GEN_FAILED;
-		return -EIO;
-	}
+	cpacf_ppno(CPACF_PPNO_SHA512_DRNG_GEN,
+		   &prng_data->ppnows, buf, nbytes, NULL, 0);
 
 	/* FIPS 140-2 Conditional Self Test */
 	if (fips_enabled) {
@@ -479,7 +434,7 @@ static int prng_sha512_generate(u8 *buf, size_t nbytes)
 		memcpy(prng_data->prev, buf, nbytes);
 	}
 
-	return ret;
+	return nbytes;
 }
 
 
@@ -494,7 +449,7 @@ static int prng_open(struct inode *inode, struct file *file)
 static ssize_t prng_tdes_read(struct file *file, char __user *ubuf,
 			      size_t nbytes, loff_t *ppos)
 {
-	int chunk, n, tmp, ret = 0;
+	int chunk, n, ret = 0;
 
 	/* lock prng_data struct */
 	if (mutex_lock_interruptible(&prng_data->mutex))
@@ -545,13 +500,9 @@ static ssize_t prng_tdes_read(struct file *file, char __user *ubuf,
 		 *
 		 * Note: you can still get strict X9.17 conformity by setting
 		 * prng_chunk_size to 8 bytes.
-		*/
-		tmp = cpacf_kmc(CPACF_KMC_PRNG, prng_data->prngws.parm_block,
-				prng_data->buf, prng_data->buf, n);
-		if (tmp < 0 || tmp != n) {
-			ret = -EIO;
-			break;
-		}
+		 */
+		cpacf_kmc(CPACF_KMC_PRNG, prng_data->prngws.parm_block,
+			  prng_data->buf, prng_data->buf, n);
 
 		prng_data->prngws.byte_counter += n;
 		prng_data->prngws.reseed_counter += n;
@@ -806,13 +757,13 @@ static int __init prng_init(void)
 	int ret;
 
 	/* check if the CPU has a PRNG */
-	if (!cpacf_query(CPACF_KMC, CPACF_KMC_PRNG))
+	if (!cpacf_query_func(CPACF_KMC, CPACF_KMC_PRNG))
 		return -EOPNOTSUPP;
 
 	/* choose prng mode */
 	if (prng_mode != PRNG_MODE_TDES) {
 		/* check for MSA5 support for PPNO operations */
-		if (!cpacf_query(CPACF_PPNO, CPACF_PPNO_SHA512_DRNG_GEN)) {
+		if (!cpacf_query_func(CPACF_PPNO, CPACF_PPNO_SHA512_DRNG_GEN)) {
 			if (prng_mode == PRNG_MODE_SHA512) {
 				pr_err("The prng module cannot "
 				       "start in SHA-512 mode\n");
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 5fbf91b..c7de53d 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -91,7 +91,7 @@ static struct shash_alg alg = {
 
 static int __init sha1_s390_init(void)
 {
-	if (!cpacf_query(CPACF_KIMD, CPACF_KIMD_SHA_1))
+	if (!cpacf_query_func(CPACF_KIMD, CPACF_KIMD_SHA_1))
 		return -EOPNOTSUPP;
 	return crypto_register_shash(&alg);
 }
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 10aac0b..53c2779 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -123,7 +123,7 @@ static int __init sha256_s390_init(void)
 {
 	int ret;
 
-	if (!cpacf_query(CPACF_KIMD, CPACF_KIMD_SHA_256))
+	if (!cpacf_query_func(CPACF_KIMD, CPACF_KIMD_SHA_256))
 		return -EOPNOTSUPP;
 	ret = crypto_register_shash(&sha256_alg);
 	if (ret < 0)
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index ea85757..2f4caa1 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -133,7 +133,7 @@ static int __init init(void)
 {
 	int ret;
 
-	if (!cpacf_query(CPACF_KIMD, CPACF_KIMD_SHA_512))
+	if (!cpacf_query_func(CPACF_KIMD, CPACF_KIMD_SHA_512))
 		return -EOPNOTSUPP;
 	if ((ret = crypto_register_shash(&sha512_alg)) < 0)
 		goto out;
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
index 8e90816..c740f77 100644
--- a/arch/s390/crypto/sha_common.c
+++ b/arch/s390/crypto/sha_common.c
@@ -22,8 +22,7 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len)
 {
 	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
 	unsigned int bsize = crypto_shash_blocksize(desc->tfm);
-	unsigned int index;
-	int ret;
+	unsigned int index, n;
 
 	/* how much is already in the buffer? */
 	index = ctx->count & (bsize - 1);
@@ -35,9 +34,7 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len)
 	/* process one stored block */
 	if (index) {
 		memcpy(ctx->buf + index, data, bsize - index);
-		ret = cpacf_kimd(ctx->func, ctx->state, ctx->buf, bsize);
-		if (ret != bsize)
-			return -EIO;
+		cpacf_kimd(ctx->func, ctx->state, ctx->buf, bsize);
 		data += bsize - index;
 		len -= bsize - index;
 		index = 0;
@@ -45,12 +42,10 @@ int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len)
 
 	/* process as many blocks as possible */
 	if (len >= bsize) {
-		ret = cpacf_kimd(ctx->func, ctx->state, data,
-				 len & ~(bsize - 1));
-		if (ret != (len & ~(bsize - 1)))
-			return -EIO;
-		data += ret;
-		len -= ret;
+		n = len & ~(bsize - 1);
+		cpacf_kimd(ctx->func, ctx->state, data, n);
+		data += n;
+		len -= n;
 	}
 store:
 	if (len)
@@ -66,7 +61,6 @@ int s390_sha_final(struct shash_desc *desc, u8 *out)
 	unsigned int bsize = crypto_shash_blocksize(desc->tfm);
 	u64 bits;
 	unsigned int index, end, plen;
-	int ret;
 
 	/* SHA-512 uses 128 bit padding length */
 	plen = (bsize > SHA256_BLOCK_SIZE) ? 16 : 8;
@@ -88,10 +82,7 @@ int s390_sha_final(struct shash_desc *desc, u8 *out)
 	 */
 	bits = ctx->count * 8;
 	memcpy(ctx->buf + end - 8, &bits, sizeof(bits));
-
-	ret = cpacf_kimd(ctx->func, ctx->state, ctx->buf, end);
-	if (ret != end)
-		return -EIO;
+	cpacf_kimd(ctx->func, ctx->state, ctx->buf, end);
 
 	/* copy digest to out */
 	memcpy(out, ctx->state, crypto_shash_digestsize(desc->tfm));
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 255c7ee..09bccb2 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -51,7 +51,7 @@ static void hypfs_update_update(struct super_block *sb)
 	struct inode *inode = d_inode(sb_info->update_file);
 
 	sb_info->last_update = get_seconds();
-	inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+	inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode);
 }
 
 /* directory tree removal functions */
@@ -99,7 +99,7 @@ static struct inode *hypfs_make_inode(struct super_block *sb, umode_t mode)
 		ret->i_mode = mode;
 		ret->i_uid = hypfs_info->uid;
 		ret->i_gid = hypfs_info->gid;
-		ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
+		ret->i_atime = ret->i_mtime = ret->i_ctime = current_time(ret);
 		if (S_ISDIR(mode))
 			set_nlink(ret, 2);
 	}
diff --git a/arch/s390/include/asm/cpacf.h b/arch/s390/include/asm/cpacf.h
index d28621d..2c680db 100644
--- a/arch/s390/include/asm/cpacf.h
+++ b/arch/s390/include/asm/cpacf.h
@@ -28,67 +28,51 @@
 #define CPACF_PPNO		0xb93c		/* MSA5 */
 
 /*
- * Function codes for the KM (CIPHER MESSAGE)
- * instruction (0x80 is the decipher modifier bit)
+ * Decryption modifier bit
+ */
+#define CPACF_DECRYPT		0x80
+
+/*
+ * Function codes for the KM (CIPHER MESSAGE) instruction
  */
 #define CPACF_KM_QUERY		0x00
-#define CPACF_KM_DEA_ENC	0x01
-#define CPACF_KM_DEA_DEC	0x81
-#define CPACF_KM_TDEA_128_ENC	0x02
-#define CPACF_KM_TDEA_128_DEC	0x82
-#define CPACF_KM_TDEA_192_ENC	0x03
-#define CPACF_KM_TDEA_192_DEC	0x83
-#define CPACF_KM_AES_128_ENC	0x12
-#define CPACF_KM_AES_128_DEC	0x92
-#define CPACF_KM_AES_192_ENC	0x13
-#define CPACF_KM_AES_192_DEC	0x93
-#define CPACF_KM_AES_256_ENC	0x14
-#define CPACF_KM_AES_256_DEC	0x94
-#define CPACF_KM_XTS_128_ENC	0x32
-#define CPACF_KM_XTS_128_DEC	0xb2
-#define CPACF_KM_XTS_256_ENC	0x34
-#define CPACF_KM_XTS_256_DEC	0xb4
+#define CPACF_KM_DEA		0x01
+#define CPACF_KM_TDEA_128	0x02
+#define CPACF_KM_TDEA_192	0x03
+#define CPACF_KM_AES_128	0x12
+#define CPACF_KM_AES_192	0x13
+#define CPACF_KM_AES_256	0x14
+#define CPACF_KM_XTS_128	0x32
+#define CPACF_KM_XTS_256	0x34
 
 /*
  * Function codes for the KMC (CIPHER MESSAGE WITH CHAINING)
- * instruction (0x80 is the decipher modifier bit)
+ * instruction
  */
 #define CPACF_KMC_QUERY		0x00
-#define CPACF_KMC_DEA_ENC	0x01
-#define CPACF_KMC_DEA_DEC	0x81
-#define CPACF_KMC_TDEA_128_ENC	0x02
-#define CPACF_KMC_TDEA_128_DEC	0x82
-#define CPACF_KMC_TDEA_192_ENC	0x03
-#define CPACF_KMC_TDEA_192_DEC	0x83
-#define CPACF_KMC_AES_128_ENC	0x12
-#define CPACF_KMC_AES_128_DEC	0x92
-#define CPACF_KMC_AES_192_ENC	0x13
-#define CPACF_KMC_AES_192_DEC	0x93
-#define CPACF_KMC_AES_256_ENC	0x14
-#define CPACF_KMC_AES_256_DEC	0x94
+#define CPACF_KMC_DEA		0x01
+#define CPACF_KMC_TDEA_128	0x02
+#define CPACF_KMC_TDEA_192	0x03
+#define CPACF_KMC_AES_128	0x12
+#define CPACF_KMC_AES_192	0x13
+#define CPACF_KMC_AES_256	0x14
 #define CPACF_KMC_PRNG		0x43
 
 /*
  * Function codes for the KMCTR (CIPHER MESSAGE WITH COUNTER)
- * instruction (0x80 is the decipher modifier bit)
+ * instruction
  */
-#define CPACF_KMCTR_QUERY	 0x00
-#define CPACF_KMCTR_DEA_ENC	 0x01
-#define CPACF_KMCTR_DEA_DEC	 0x81
-#define CPACF_KMCTR_TDEA_128_ENC 0x02
-#define CPACF_KMCTR_TDEA_128_DEC 0x82
-#define CPACF_KMCTR_TDEA_192_ENC 0x03
-#define CPACF_KMCTR_TDEA_192_DEC 0x83
-#define CPACF_KMCTR_AES_128_ENC	 0x12
-#define CPACF_KMCTR_AES_128_DEC	 0x92
-#define CPACF_KMCTR_AES_192_ENC	 0x13
-#define CPACF_KMCTR_AES_192_DEC	 0x93
-#define CPACF_KMCTR_AES_256_ENC	 0x14
-#define CPACF_KMCTR_AES_256_DEC	 0x94
+#define CPACF_KMCTR_QUERY	0x00
+#define CPACF_KMCTR_DEA		0x01
+#define CPACF_KMCTR_TDEA_128	0x02
+#define CPACF_KMCTR_TDEA_192	0x03
+#define CPACF_KMCTR_AES_128	0x12
+#define CPACF_KMCTR_AES_192	0x13
+#define CPACF_KMCTR_AES_256	0x14
 
 /*
  * Function codes for the KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST)
- * instruction (0x80 is the decipher modifier bit)
+ * instruction
  */
 #define CPACF_KIMD_QUERY	0x00
 #define CPACF_KIMD_SHA_1	0x01
@@ -98,7 +82,7 @@
 
 /*
  * Function codes for the KLMD (COMPUTE LAST MESSAGE DIGEST)
- * instruction (0x80 is the decipher modifier bit)
+ * instruction
  */
 #define CPACF_KLMD_QUERY	0x00
 #define CPACF_KLMD_SHA_1	0x01
@@ -107,7 +91,7 @@
 
 /*
  * function codes for the KMAC (COMPUTE MESSAGE AUTHENTICATION CODE)
- * instruction (0x80 is the decipher modifier bit)
+ * instruction
  */
 #define CPACF_KMAC_QUERY	0x00
 #define CPACF_KMAC_DEA		0x01
@@ -116,12 +100,14 @@
 
 /*
  * Function codes for the PPNO (PERFORM PSEUDORANDOM NUMBER OPERATION)
- * instruction (0x80 is the decipher modifier bit)
+ * instruction
  */
 #define CPACF_PPNO_QUERY		0x00
 #define CPACF_PPNO_SHA512_DRNG_GEN	0x03
 #define CPACF_PPNO_SHA512_DRNG_SEED	0x83
 
+typedef struct { unsigned char bytes[16]; } cpacf_mask_t;
+
 /**
  * cpacf_query() - check if a specific CPACF function is available
  * @opcode: the opcode of the crypto instruction
@@ -132,55 +118,66 @@
  *
  * Returns 1 if @func is available for @opcode, 0 otherwise
  */
-static inline void __cpacf_query(unsigned int opcode, unsigned char *status)
+static inline void __cpacf_query(unsigned int opcode, cpacf_mask_t *mask)
 {
-	typedef struct { unsigned char _[16]; } status_type;
 	register unsigned long r0 asm("0") = 0;	/* query function */
-	register unsigned long r1 asm("1") = (unsigned long) status;
+	register unsigned long r1 asm("1") = (unsigned long) mask;
 
 	asm volatile(
 		"	spm 0\n" /* pckmo doesn't change the cc */
 		/* Parameter registers are ignored, but may not be 0 */
 		"0:	.insn	rrf,%[opc] << 16,2,2,2,0\n"
 		"	brc	1,0b\n"	/* handle partial completion */
-		: "=m" (*(status_type *) status)
+		: "=m" (*mask)
 		: [fc] "d" (r0), [pba] "a" (r1), [opc] "i" (opcode)
 		: "cc");
 }
 
-static inline int cpacf_query(unsigned int opcode, unsigned int func)
+static inline int __cpacf_check_opcode(unsigned int opcode)
 {
-	unsigned char status[16];
-
 	switch (opcode) {
 	case CPACF_KMAC:
 	case CPACF_KM:
 	case CPACF_KMC:
 	case CPACF_KIMD:
 	case CPACF_KLMD:
-		if (!test_facility(17))	/* check for MSA */
-			return 0;
-		break;
+		return test_facility(17);	/* check for MSA */
 	case CPACF_PCKMO:
-		if (!test_facility(76))	/* check for MSA3 */
-			return 0;
-		break;
+		return test_facility(76);	/* check for MSA3 */
 	case CPACF_KMF:
 	case CPACF_KMO:
 	case CPACF_PCC:
 	case CPACF_KMCTR:
-		if (!test_facility(77))	/* check for MSA4 */
-			return 0;
-		break;
+		return test_facility(77);	/* check for MSA4 */
 	case CPACF_PPNO:
-		if (!test_facility(57))	/* check for MSA5 */
-			return 0;
-		break;
+		return test_facility(57);	/* check for MSA5 */
 	default:
 		BUG();
 	}
-	__cpacf_query(opcode, status);
-	return (status[func >> 3] & (0x80 >> (func & 7))) != 0;
+}
+
+static inline int cpacf_query(unsigned int opcode, cpacf_mask_t *mask)
+{
+	if (__cpacf_check_opcode(opcode)) {
+		__cpacf_query(opcode, mask);
+		return 1;
+	}
+	memset(mask, 0, sizeof(*mask));
+	return 0;
+}
+
+static inline int cpacf_test_func(cpacf_mask_t *mask, unsigned int func)
+{
+	return (mask->bytes[func >> 3] & (0x80 >> (func & 7))) != 0;
+}
+
+static inline int cpacf_query_func(unsigned int opcode, unsigned int func)
+{
+	cpacf_mask_t mask;
+
+	if (cpacf_query(opcode, &mask))
+		return cpacf_test_func(&mask, func);
+	return 0;
 }
 
 /**
@@ -194,7 +191,7 @@ static inline int cpacf_query(unsigned int opcode, unsigned int func)
  * Returns 0 for the query func, number of processed bytes for
  * encryption/decryption funcs
  */
-static inline int cpacf_km(long func, void *param,
+static inline int cpacf_km(unsigned long func, void *param,
 			   u8 *dest, const u8 *src, long src_len)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
@@ -224,7 +221,7 @@ static inline int cpacf_km(long func, void *param,
  * Returns 0 for the query func, number of processed bytes for
  * encryption/decryption funcs
  */
-static inline int cpacf_kmc(long func, void *param,
+static inline int cpacf_kmc(unsigned long func, void *param,
 			    u8 *dest, const u8 *src, long src_len)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
@@ -250,11 +247,9 @@ static inline int cpacf_kmc(long func, void *param,
  * @param: address of parameter block; see POP for details on each func
  * @src: address of source memory area
  * @src_len: length of src operand in bytes
- *
- * Returns 0 for the query func, number of processed bytes for digest funcs
  */
-static inline int cpacf_kimd(long func, void *param,
-			     const u8 *src, long src_len)
+static inline void cpacf_kimd(unsigned long func, void *param,
+			      const u8 *src, long src_len)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
 	register unsigned long r1 asm("1") = (unsigned long) param;
@@ -267,8 +262,6 @@ static inline int cpacf_kimd(long func, void *param,
 		: [src] "+a" (r2), [len] "+d" (r3)
 		: [fc] "d" (r0), [pba] "a" (r1), [opc] "i" (CPACF_KIMD)
 		: "cc", "memory");
-
-	return src_len - r3;
 }
 
 /**
@@ -277,11 +270,9 @@ static inline int cpacf_kimd(long func, void *param,
  * @param: address of parameter block; see POP for details on each func
  * @src: address of source memory area
  * @src_len: length of src operand in bytes
- *
- * Returns 0 for the query func, number of processed bytes for digest funcs
  */
-static inline int cpacf_klmd(long func, void *param,
-			     const u8 *src, long src_len)
+static inline void cpacf_klmd(unsigned long func, void *param,
+			      const u8 *src, long src_len)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
 	register unsigned long r1 asm("1") = (unsigned long) param;
@@ -294,8 +285,6 @@ static inline int cpacf_klmd(long func, void *param,
 		: [src] "+a" (r2), [len] "+d" (r3)
 		: [fc] "d" (r0), [pba] "a" (r1), [opc] "i" (CPACF_KLMD)
 		: "cc", "memory");
-
-	return src_len - r3;
 }
 
 /**
@@ -308,7 +297,7 @@ static inline int cpacf_klmd(long func, void *param,
  *
  * Returns 0 for the query func, number of processed bytes for digest funcs
  */
-static inline int cpacf_kmac(long func, void *param,
+static inline int cpacf_kmac(unsigned long func, void *param,
 			     const u8 *src, long src_len)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
@@ -338,7 +327,7 @@ static inline int cpacf_kmac(long func, void *param,
  * Returns 0 for the query func, number of processed bytes for
  * encryption/decryption funcs
  */
-static inline int cpacf_kmctr(long func, void *param, u8 *dest,
+static inline int cpacf_kmctr(unsigned long func, void *param, u8 *dest,
 			      const u8 *src, long src_len, u8 *counter)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
@@ -368,13 +357,10 @@ static inline int cpacf_kmctr(long func, void *param, u8 *dest,
  * @dest_len: size of destination memory area in bytes
  * @seed: address of seed data
  * @seed_len: size of seed data in bytes
- *
- * Returns 0 for the query func, number of random bytes stored in
- * dest buffer for generate function
  */
-static inline int cpacf_ppno(long func, void *param,
-			     u8 *dest, long dest_len,
-			     const u8 *seed, long seed_len)
+static inline void cpacf_ppno(unsigned long func, void *param,
+			      u8 *dest, long dest_len,
+			      const u8 *seed, long seed_len)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
 	register unsigned long r1 asm("1") = (unsigned long) param;
@@ -390,8 +376,6 @@ static inline int cpacf_ppno(long func, void *param,
 		: [fc] "d" (r0), [pba] "a" (r1),
 		  [seed] "a" (r4), [slen] "d" (r5), [opc] "i" (CPACF_PPNO)
 		: "cc", "memory");
-
-	return dest_len - r3;
 }
 
 /**
@@ -399,10 +383,8 @@ static inline int cpacf_ppno(long func, void *param,
  *		 instruction
  * @func: the function code passed to PCC; see CPACF_KM_xxx defines
  * @param: address of parameter block; see POP for details on each func
- *
- * Returns 0.
  */
-static inline int cpacf_pcc(long func, void *param)
+static inline void cpacf_pcc(unsigned long func, void *param)
 {
 	register unsigned long r0 asm("0") = (unsigned long) func;
 	register unsigned long r1 asm("1") = (unsigned long) param;
@@ -413,8 +395,6 @@ static inline int cpacf_pcc(long func, void *param)
 		:
 		: [fc] "d" (r0), [pba] "a" (r1), [opc] "i" (CPACF_PCC)
 		: "cc", "memory");
-
-	return 0;
 }
 
 #endif	/* _ASM_S390_CPACF_H */
diff --git a/arch/s390/include/asm/facilities_src.h b/arch/s390/include/asm/facilities_src.h
index 4917728..3b758f6 100644
--- a/arch/s390/include/asm/facilities_src.h
+++ b/arch/s390/include/asm/facilities_src.h
@@ -55,4 +55,28 @@ static struct facility_def facility_defs[] = {
 			-1 /* END */
 		}
 	},
+	{
+		.name = "FACILITIES_KVM",
+		.bits = (int[]){
+			0,  /* N3 instructions */
+			1,  /* z/Arch mode installed */
+			2,  /* z/Arch mode active */
+			3,  /* DAT-enhancement */
+			4,  /* idte segment table */
+			5,  /* idte region table */
+			6,  /* ASN-and-LX reuse */
+			7,  /* stfle */
+			8,  /* enhanced-DAT 1 */
+			9,  /* sense-running-status */
+			10, /* conditional sske */
+			13, /* ipte-range */
+			14, /* nonquiescing key-setting */
+			73, /* transactional execution */
+			75, /* access-exception-fetch/store indication */
+			76, /* msa extension 3 */
+			77, /* msa extension 4 */
+			78, /* enhanced-DAT 2 */
+			-1  /* END */
+		}
+	},
 };
diff --git a/arch/s390/include/asm/fpu/api.h b/arch/s390/include/asm/fpu/api.h
index 6aba6fc..02124d6 100644
--- a/arch/s390/include/asm/fpu/api.h
+++ b/arch/s390/include/asm/fpu/api.h
@@ -64,18 +64,18 @@ static inline int test_fp_ctl(u32 fpc)
 	return rc;
 }
 
-#define KERNEL_VXR_V0V7		1
-#define KERNEL_VXR_V8V15	2
-#define KERNEL_VXR_V16V23	4
-#define KERNEL_VXR_V24V31	8
-#define KERNEL_FPR		16
-#define KERNEL_FPC		256
+#define KERNEL_FPC		1
+#define KERNEL_VXR_V0V7		2
+#define KERNEL_VXR_V8V15	4
+#define KERNEL_VXR_V16V23	8
+#define KERNEL_VXR_V24V31	16
 
 #define KERNEL_VXR_LOW		(KERNEL_VXR_V0V7|KERNEL_VXR_V8V15)
 #define KERNEL_VXR_MID		(KERNEL_VXR_V8V15|KERNEL_VXR_V16V23)
 #define KERNEL_VXR_HIGH		(KERNEL_VXR_V16V23|KERNEL_VXR_V24V31)
 
-#define KERNEL_FPU_MASK		(KERNEL_VXR_LOW|KERNEL_VXR_HIGH|KERNEL_FPR)
+#define KERNEL_VXR		(KERNEL_VXR_LOW|KERNEL_VXR_HIGH)
+#define KERNEL_FPR		(KERNEL_FPC|KERNEL_VXR_V0V7)
 
 struct kernel_fpu;
 
@@ -87,18 +87,28 @@ struct kernel_fpu;
  * Prefer using the kernel_fpu_begin()/kernel_fpu_end() pair of functions.
  */
 void __kernel_fpu_begin(struct kernel_fpu *state, u32 flags);
-void __kernel_fpu_end(struct kernel_fpu *state);
+void __kernel_fpu_end(struct kernel_fpu *state, u32 flags);
 
 
 static inline void kernel_fpu_begin(struct kernel_fpu *state, u32 flags)
 {
 	preempt_disable();
-	__kernel_fpu_begin(state, flags);
+	state->mask = S390_lowcore.fpu_flags;
+	if (!test_cpu_flag(CIF_FPU))
+		/* Save user space FPU state and register contents */
+		save_fpu_regs();
+	else if (state->mask & flags)
+		/* Save FPU/vector register in-use by the kernel */
+		__kernel_fpu_begin(state, flags);
+	S390_lowcore.fpu_flags |= flags;
 }
 
-static inline void kernel_fpu_end(struct kernel_fpu *state)
+static inline void kernel_fpu_end(struct kernel_fpu *state, u32 flags)
 {
-	__kernel_fpu_end(state);
+	S390_lowcore.fpu_flags = state->mask;
+	if (state->mask & flags)
+		/* Restore FPU/vector register in-use by the kernel */
+		__kernel_fpu_end(state, flags);
 	preempt_enable();
 }
 
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 8e5daf7..a41faf3 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -28,7 +28,7 @@
 
 #define KVM_S390_BSCA_CPU_SLOTS 64
 #define KVM_S390_ESCA_CPU_SLOTS 248
-#define KVM_MAX_VCPUS KVM_S390_ESCA_CPU_SLOTS
+#define KVM_MAX_VCPUS 255
 #define KVM_USER_MEM_SLOTS 32
 
 /*
@@ -245,72 +245,72 @@ struct sie_page {
 } __packed;
 
 struct kvm_vcpu_stat {
-	u32 exit_userspace;
-	u32 exit_null;
-	u32 exit_external_request;
-	u32 exit_external_interrupt;
-	u32 exit_stop_request;
-	u32 exit_validity;
-	u32 exit_instruction;
-	u32 exit_pei;
-	u32 halt_successful_poll;
-	u32 halt_attempted_poll;
-	u32 halt_poll_invalid;
-	u32 halt_wakeup;
-	u32 instruction_lctl;
-	u32 instruction_lctlg;
-	u32 instruction_stctl;
-	u32 instruction_stctg;
-	u32 exit_program_interruption;
-	u32 exit_instr_and_program;
-	u32 exit_operation_exception;
-	u32 deliver_external_call;
-	u32 deliver_emergency_signal;
-	u32 deliver_service_signal;
-	u32 deliver_virtio_interrupt;
-	u32 deliver_stop_signal;
-	u32 deliver_prefix_signal;
-	u32 deliver_restart_signal;
-	u32 deliver_program_int;
-	u32 deliver_io_int;
-	u32 exit_wait_state;
-	u32 instruction_pfmf;
-	u32 instruction_stidp;
-	u32 instruction_spx;
-	u32 instruction_stpx;
-	u32 instruction_stap;
-	u32 instruction_storage_key;
-	u32 instruction_ipte_interlock;
-	u32 instruction_stsch;
-	u32 instruction_chsc;
-	u32 instruction_stsi;
-	u32 instruction_stfl;
-	u32 instruction_tprot;
-	u32 instruction_sie;
-	u32 instruction_essa;
-	u32 instruction_sthyi;
-	u32 instruction_sigp_sense;
-	u32 instruction_sigp_sense_running;
-	u32 instruction_sigp_external_call;
-	u32 instruction_sigp_emergency;
-	u32 instruction_sigp_cond_emergency;
-	u32 instruction_sigp_start;
-	u32 instruction_sigp_stop;
-	u32 instruction_sigp_stop_store_status;
-	u32 instruction_sigp_store_status;
-	u32 instruction_sigp_store_adtl_status;
-	u32 instruction_sigp_arch;
-	u32 instruction_sigp_prefix;
-	u32 instruction_sigp_restart;
-	u32 instruction_sigp_init_cpu_reset;
-	u32 instruction_sigp_cpu_reset;
-	u32 instruction_sigp_unknown;
-	u32 diagnose_10;
-	u32 diagnose_44;
-	u32 diagnose_9c;
-	u32 diagnose_258;
-	u32 diagnose_308;
-	u32 diagnose_500;
+	u64 exit_userspace;
+	u64 exit_null;
+	u64 exit_external_request;
+	u64 exit_external_interrupt;
+	u64 exit_stop_request;
+	u64 exit_validity;
+	u64 exit_instruction;
+	u64 exit_pei;
+	u64 halt_successful_poll;
+	u64 halt_attempted_poll;
+	u64 halt_poll_invalid;
+	u64 halt_wakeup;
+	u64 instruction_lctl;
+	u64 instruction_lctlg;
+	u64 instruction_stctl;
+	u64 instruction_stctg;
+	u64 exit_program_interruption;
+	u64 exit_instr_and_program;
+	u64 exit_operation_exception;
+	u64 deliver_external_call;
+	u64 deliver_emergency_signal;
+	u64 deliver_service_signal;
+	u64 deliver_virtio_interrupt;
+	u64 deliver_stop_signal;
+	u64 deliver_prefix_signal;
+	u64 deliver_restart_signal;
+	u64 deliver_program_int;
+	u64 deliver_io_int;
+	u64 exit_wait_state;
+	u64 instruction_pfmf;
+	u64 instruction_stidp;
+	u64 instruction_spx;
+	u64 instruction_stpx;
+	u64 instruction_stap;
+	u64 instruction_storage_key;
+	u64 instruction_ipte_interlock;
+	u64 instruction_stsch;
+	u64 instruction_chsc;
+	u64 instruction_stsi;
+	u64 instruction_stfl;
+	u64 instruction_tprot;
+	u64 instruction_sie;
+	u64 instruction_essa;
+	u64 instruction_sthyi;
+	u64 instruction_sigp_sense;
+	u64 instruction_sigp_sense_running;
+	u64 instruction_sigp_external_call;
+	u64 instruction_sigp_emergency;
+	u64 instruction_sigp_cond_emergency;
+	u64 instruction_sigp_start;
+	u64 instruction_sigp_stop;
+	u64 instruction_sigp_stop_store_status;
+	u64 instruction_sigp_store_status;
+	u64 instruction_sigp_store_adtl_status;
+	u64 instruction_sigp_arch;
+	u64 instruction_sigp_prefix;
+	u64 instruction_sigp_restart;
+	u64 instruction_sigp_init_cpu_reset;
+	u64 instruction_sigp_cpu_reset;
+	u64 instruction_sigp_unknown;
+	u64 diagnose_10;
+	u64 diagnose_44;
+	u64 diagnose_9c;
+	u64 diagnose_258;
+	u64 diagnose_308;
+	u64 diagnose_500;
 };
 
 #define PGM_OPERATION			0x01
@@ -577,7 +577,7 @@ struct kvm_vcpu_arch {
 };
 
 struct kvm_vm_stat {
-	u32 remote_tlb_flush;
+	ulong remote_tlb_flush;
 };
 
 struct kvm_arch_memory_slot {
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index d79ba7c..7b93b78 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -129,7 +129,8 @@ struct lowcore {
 	__u8	pad_0x0390[0x0398-0x0390];	/* 0x0390 */
 	__u64	gmap;				/* 0x0398 */
 	__u32	spinlock_lockval;		/* 0x03a0 */
-	__u8	pad_0x03a0[0x0400-0x03a4];	/* 0x03a4 */
+	__u32	fpu_flags;			/* 0x03a4 */
+	__u8	pad_0x03a8[0x0400-0x03a8];	/* 0x03a8 */
 
 	/* Per cpu primary space access list */
 	__u32	paste[16];			/* 0x0400 */
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 6d39329..bea785d 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -12,6 +12,7 @@ typedef struct {
 	struct list_head pgtable_list;
 	spinlock_t gmap_lock;
 	struct list_head gmap_list;
+	unsigned long gmap_asce;
 	unsigned long asce;
 	unsigned long asce_limit;
 	unsigned long vdso_base;
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index c6a088c..515fea5 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -21,6 +21,7 @@ static inline int init_new_context(struct task_struct *tsk,
 	INIT_LIST_HEAD(&mm->context.gmap_list);
 	cpumask_clear(&mm->context.cpu_attach_mask);
 	atomic_set(&mm->context.flush_count, 0);
+	mm->context.gmap_asce = 0;
 	mm->context.flush_mm = 0;
 #ifdef CONFIG_PGSTE
 	mm->context.alloc_pgste = page_table_allocate_pgste;
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 0da91c4..6611f79 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -11,6 +11,7 @@
 #include <asm-generic/pci.h>
 #include <asm/pci_clp.h>
 #include <asm/pci_debug.h>
+#include <asm/sclp.h>
 
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
@@ -117,6 +118,7 @@ struct zpci_dev {
 
 	spinlock_t	iommu_bitmap_lock;
 	unsigned long	*iommu_bitmap;
+	unsigned long	*lazy_bitmap;
 	unsigned long	iommu_size;
 	unsigned long	iommu_pages;
 	unsigned int	next_bit;
@@ -216,6 +218,9 @@ void zpci_debug_init_device(struct zpci_dev *, const char *);
 void zpci_debug_exit_device(struct zpci_dev *);
 void zpci_debug_info(struct zpci_dev *, struct seq_file *);
 
+/* Error reporting */
+int zpci_report_error(struct pci_dev *, struct zpci_report_error_header *);
+
 #ifdef CONFIG_NUMA
 
 /* Returns the node based on PCI bus */
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 72c7f60..0362cd5 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -874,35 +874,31 @@ static inline pte_t pte_mkhuge(pte_t pte)
 }
 #endif
 
-static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
-{
-	unsigned long pto = (unsigned long) ptep;
-
-	/* Invalidation + global TLB flush for the pte */
-	asm volatile(
-		"	ipte	%2,%3"
-		: "=m" (*ptep) : "m" (*ptep), "a" (pto), "a" (address));
-}
+#define IPTE_GLOBAL	0
+#define	IPTE_LOCAL	1
 
-static inline void __ptep_ipte_local(unsigned long address, pte_t *ptep)
+static inline void __ptep_ipte(unsigned long address, pte_t *ptep, int local)
 {
 	unsigned long pto = (unsigned long) ptep;
 
-	/* Invalidation + local TLB flush for the pte */
+	/* Invalidation + TLB flush for the pte */
 	asm volatile(
-		"	.insn rrf,0xb2210000,%2,%3,0,1"
-		: "=m" (*ptep) : "m" (*ptep), "a" (pto), "a" (address));
+		"       .insn rrf,0xb2210000,%[r1],%[r2],0,%[m4]"
+		: "+m" (*ptep) : [r1] "a" (pto), [r2] "a" (address),
+		  [m4] "i" (local));
 }
 
-static inline void __ptep_ipte_range(unsigned long address, int nr, pte_t *ptep)
+static inline void __ptep_ipte_range(unsigned long address, int nr,
+				     pte_t *ptep, int local)
 {
 	unsigned long pto = (unsigned long) ptep;
 
-	/* Invalidate a range of ptes + global TLB flush of the ptes */
+	/* Invalidate a range of ptes + TLB flush of the ptes */
 	do {
 		asm volatile(
-			"	.insn rrf,0xb2210000,%2,%0,%1,0"
-			: "+a" (address), "+a" (nr) : "a" (pto) : "memory");
+			"       .insn rrf,0xb2210000,%[r1],%[r2],%[r3],%[m4]"
+			: [r2] "+a" (address), [r3] "+a" (nr)
+			: [r1] "a" (pto), [m4] "i" (local) : "memory");
 	} while (nr != 255);
 }
 
@@ -1239,53 +1235,33 @@ static inline void __pmdp_csp(pmd_t *pmdp)
 	    pmd_val(*pmdp) | _SEGMENT_ENTRY_INVALID);
 }
 
-static inline void __pmdp_idte(unsigned long address, pmd_t *pmdp)
-{
-	unsigned long sto;
-
-	sto = (unsigned long) pmdp - pmd_index(address) * sizeof(pmd_t);
-	asm volatile(
-		"	.insn	rrf,0xb98e0000,%2,%3,0,0"
-		: "=m" (*pmdp)
-		: "m" (*pmdp), "a" (sto), "a" ((address & HPAGE_MASK))
-		: "cc" );
-}
-
-static inline void __pudp_idte(unsigned long address, pud_t *pudp)
-{
-	unsigned long r3o;
-
-	r3o = (unsigned long) pudp - pud_index(address) * sizeof(pud_t);
-	r3o |= _ASCE_TYPE_REGION3;
-	asm volatile(
-		"	.insn	rrf,0xb98e0000,%2,%3,0,0"
-		: "=m" (*pudp)
-		: "m" (*pudp), "a" (r3o), "a" ((address & PUD_MASK))
-		: "cc");
-}
+#define IDTE_GLOBAL	0
+#define IDTE_LOCAL	1
 
-static inline void __pmdp_idte_local(unsigned long address, pmd_t *pmdp)
+static inline void __pmdp_idte(unsigned long address, pmd_t *pmdp, int local)
 {
 	unsigned long sto;
 
 	sto = (unsigned long) pmdp - pmd_index(address) * sizeof(pmd_t);
 	asm volatile(
-		"	.insn	rrf,0xb98e0000,%2,%3,0,1"
-		: "=m" (*pmdp)
-		: "m" (*pmdp), "a" (sto), "a" ((address & HPAGE_MASK))
+		"	.insn	rrf,0xb98e0000,%[r1],%[r2],0,%[m4]"
+		: "+m" (*pmdp)
+		: [r1] "a" (sto), [r2] "a" ((address & HPAGE_MASK)),
+		  [m4] "i" (local)
 		: "cc" );
 }
 
-static inline void __pudp_idte_local(unsigned long address, pud_t *pudp)
+static inline void __pudp_idte(unsigned long address, pud_t *pudp, int local)
 {
 	unsigned long r3o;
 
 	r3o = (unsigned long) pudp - pud_index(address) * sizeof(pud_t);
 	r3o |= _ASCE_TYPE_REGION3;
 	asm volatile(
-		"	.insn	rrf,0xb98e0000,%2,%3,0,1"
-		: "=m" (*pudp)
-		: "m" (*pudp), "a" (r3o), "a" ((address & PUD_MASK))
+		"	.insn	rrf,0xb98e0000,%[r1],%[r2],0,%[m4]"
+		: "+m" (*pudp)
+		: [r1] "a" (r3o), [r2] "a" ((address & PUD_MASK)),
+		  [m4] "i" (local)
 		: "cc");
 }
 
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 1a691ef..3984610 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -26,17 +26,6 @@ static inline void __tlb_flush_idte(unsigned long asce)
 		: : "a" (2048), "a" (asce) : "cc");
 }
 
-/*
- * Flush TLB entries for a specific ASCE on the local CPU
- */
-static inline void __tlb_flush_idte_local(unsigned long asce)
-{
-	/* Local TLB flush for the mm */
-	asm volatile(
-		"	.insn	rrf,0xb98e0000,0,%0,%1,1"
-		: : "a" (2048), "a" (asce) : "cc");
-}
-
 #ifdef CONFIG_SMP
 void smp_ptlb_all(void);
 
@@ -65,35 +54,33 @@ static inline void __tlb_flush_full(struct mm_struct *mm)
 		/* Global TLB flush */
 		__tlb_flush_global();
 		/* Reset TLB flush mask */
-		if (MACHINE_HAS_TLB_LC)
-			cpumask_copy(mm_cpumask(mm),
-				     &mm->context.cpu_attach_mask);
+		cpumask_copy(mm_cpumask(mm), &mm->context.cpu_attach_mask);
 	}
 	atomic_dec(&mm->context.flush_count);
 	preempt_enable();
 }
 
-/*
- * Flush TLB entries for a specific ASCE on all CPUs. Should never be used
- * when more than one asce (e.g. gmap) ran on this mm.
- */
-static inline void __tlb_flush_asce(struct mm_struct *mm, unsigned long asce)
+static inline void __tlb_flush_mm(struct mm_struct *mm)
 {
+	unsigned long gmap_asce;
+
+	/*
+	 * If the machine has IDTE we prefer to do a per mm flush
+	 * on all cpus instead of doing a local flush if the mm
+	 * only ran on the local cpu.
+	 */
 	preempt_disable();
 	atomic_inc(&mm->context.flush_count);
-	if (MACHINE_HAS_TLB_LC &&
-	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
-		__tlb_flush_idte_local(asce);
+	gmap_asce = READ_ONCE(mm->context.gmap_asce);
+	if (MACHINE_HAS_IDTE && gmap_asce != -1UL) {
+		if (gmap_asce)
+			__tlb_flush_idte(gmap_asce);
+		__tlb_flush_idte(mm->context.asce);
 	} else {
-		if (MACHINE_HAS_IDTE)
-			__tlb_flush_idte(asce);
-		else
-			__tlb_flush_global();
-		/* Reset TLB flush mask */
-		if (MACHINE_HAS_TLB_LC)
-			cpumask_copy(mm_cpumask(mm),
-				     &mm->context.cpu_attach_mask);
+		__tlb_flush_full(mm);
 	}
+	/* Reset TLB flush mask */
+	cpumask_copy(mm_cpumask(mm), &mm->context.cpu_attach_mask);
 	atomic_dec(&mm->context.flush_count);
 	preempt_enable();
 }
@@ -112,36 +99,17 @@ static inline void __tlb_flush_kernel(void)
 /*
  * Flush TLB entries for a specific ASCE on all CPUs.
  */
-static inline void __tlb_flush_asce(struct mm_struct *mm, unsigned long asce)
+static inline void __tlb_flush_mm(struct mm_struct *mm)
 {
-	if (MACHINE_HAS_TLB_LC)
-		__tlb_flush_idte_local(asce);
-	else
-		__tlb_flush_local();
+	__tlb_flush_local();
 }
 
 static inline void __tlb_flush_kernel(void)
 {
-	if (MACHINE_HAS_TLB_LC)
-		__tlb_flush_idte_local(init_mm.context.asce);
-	else
-		__tlb_flush_local();
+	__tlb_flush_local();
 }
 #endif
 
-static inline void __tlb_flush_mm(struct mm_struct * mm)
-{
-	/*
-	 * If the machine has IDTE we prefer to do a per mm flush
-	 * on all cpus instead of doing a local flush if the mm
-	 * only ran on the local cpu.
-	 */
-	if (MACHINE_HAS_IDTE && list_empty(&mm->context.gmap_list))
-		__tlb_flush_asce(mm, mm->context.asce);
-	else
-		__tlb_flush_full(mm);
-}
-
 static inline void __tlb_flush_mm_lazy(struct mm_struct * mm)
 {
 	if (mm->context.flush_mm) {
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 95aefdb..52d7c87 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -266,28 +266,28 @@ int __put_user_bad(void) __attribute__((noreturn));
 	__chk_user_ptr(ptr);					\
 	switch (sizeof(*(ptr))) {				\
 	case 1: {						\
-		unsigned char __x;				\
+		unsigned char __x = 0;				\
 		__gu_err = __get_user_fn(&__x, ptr,		\
 					 sizeof(*(ptr)));	\
 		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
 		break;						\
 	};							\
 	case 2: {						\
-		unsigned short __x;				\
+		unsigned short __x = 0;				\
 		__gu_err = __get_user_fn(&__x, ptr,		\
 					 sizeof(*(ptr)));	\
 		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
 		break;						\
 	};							\
 	case 4: {						\
-		unsigned int __x;				\
+		unsigned int __x = 0;				\
 		__gu_err = __get_user_fn(&__x, ptr,		\
 					 sizeof(*(ptr)));	\
 		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
 		break;						\
 	};							\
 	case 8: {						\
-		unsigned long long __x;				\
+		unsigned long long __x = 0;			\
 		__gu_err = __get_user_fn(&__x, ptr,		\
 					 sizeof(*(ptr)));	\
 		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
diff --git a/arch/s390/include/asm/uprobes.h b/arch/s390/include/asm/uprobes.h
index 1411dff..658393c 100644
--- a/arch/s390/include/asm/uprobes.h
+++ b/arch/s390/include/asm/uprobes.h
@@ -29,14 +29,4 @@ struct arch_uprobe {
 struct arch_uprobe_task {
 };
 
-int arch_uprobe_analyze_insn(struct arch_uprobe *aup, struct mm_struct *mm,
-			     unsigned long addr);
-int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-int arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs);
-bool arch_uprobe_xol_was_trapped(struct task_struct *tsk);
-int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val,
-				 void *data);
-void arch_uprobe_abort_xol(struct arch_uprobe *ap, struct pt_regs *regs);
-unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline,
-						struct pt_regs *regs);
 #endif	/* _ASM_UPROBES_H */
diff --git a/arch/s390/include/asm/vx-insn.h b/arch/s390/include/asm/vx-insn.h
index 4a31356..49c24a2 100644
--- a/arch/s390/include/asm/vx-insn.h
+++ b/arch/s390/include/asm/vx-insn.h
@@ -16,15 +16,13 @@
 
 /* Macros to generate vector instruction byte code */
 
-#define REG_NUM_INVALID	       255
-
 /* GR_NUM - Retrieve general-purpose register number
  *
  * @opd:	Operand to store register number
  * @r64:	String designation register in the format "%rN"
  */
 .macro	GR_NUM	opd gr
-	\opd = REG_NUM_INVALID
+	\opd = 255
 	.ifc \gr,%r0
 		\opd = 0
 	.endif
@@ -73,14 +71,11 @@
 	.ifc \gr,%r15
 		\opd = 15
 	.endif
-	.if \opd == REG_NUM_INVALID
-		.error "Invalid general-purpose register designation: \gr"
+	.if \opd == 255
+		\opd = \gr
 	.endif
 .endm
 
-/* VX_R() - Macro to encode the VX_NUM into the instruction */
-#define VX_R(v)		(v & 0x0F)
-
 /* VX_NUM - Retrieve vector register number
  *
  * @opd:	Operand to store register number
@@ -88,11 +83,10 @@
  *
  * The vector register number is used for as input number to the
  * instruction and, as well as, to compute the RXB field of the
- * instruction.  To encode the particular vector register number,
- * use the VX_R(v) macro to extract the instruction opcode.
+ * instruction.
  */
 .macro	VX_NUM	opd vxr
-	\opd = REG_NUM_INVALID
+	\opd = 255
 	.ifc \vxr,%v0
 		\opd = 0
 	.endif
@@ -189,8 +183,8 @@
 	.ifc \vxr,%v31
 		\opd = 31
 	.endif
-	.if \opd == REG_NUM_INVALID
-		.error "Invalid vector register designation: \vxr"
+	.if \opd == 255
+		\opd = \vxr
 	.endif
 .endm
 
@@ -251,7 +245,7 @@
 /* VECTOR GENERATE BYTE MASK */
 .macro	VGBM	vr imm2
 	VX_NUM	v1, \vr
-	.word	(0xE700 | (VX_R(v1) << 4))
+	.word	(0xE700 | ((v1&15) << 4))
 	.word	\imm2
 	MRXBOPC	0, 0x44, v1
 .endm
@@ -267,7 +261,7 @@
 	VX_NUM	v1, \v
 	GR_NUM	b2, "%r0"
 	GR_NUM	r3, \gr
-	.word	0xE700 | (VX_R(v1) << 4) | r3
+	.word	0xE700 | ((v1&15) << 4) | r3
 	.word	(b2 << 12) | (\disp)
 	MRXBOPC	\m, 0x22, v1
 .endm
@@ -284,12 +278,21 @@
 	VLVG	\v, \gr, \index, 3
 .endm
 
+/* VECTOR LOAD REGISTER */
+.macro	VLR	v1, v2
+	VX_NUM	v1, \v1
+	VX_NUM	v2, \v2
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	0
+	MRXBOPC	0, 0x56, v1, v2
+.endm
+
 /* VECTOR LOAD */
 .macro	VL	v, disp, index="%r0", base
 	VX_NUM	v1, \v
 	GR_NUM	x2, \index
 	GR_NUM	b2, \base
-	.word	0xE700 | (VX_R(v1) << 4) | x2
+	.word	0xE700 | ((v1&15) << 4) | x2
 	.word	(b2 << 12) | (\disp)
 	MRXBOPC 0, 0x06, v1
 .endm
@@ -299,7 +302,7 @@
 	VX_NUM	v1, \vr1
 	GR_NUM	x2, \index
 	GR_NUM	b2, \base
-	.word	0xE700 | (VX_R(v1) << 4) | x2
+	.word	0xE700 | ((v1&15) << 4) | x2
 	.word	(b2 << 12) | (\disp)
 	MRXBOPC	\m3, \opc, v1
 .endm
@@ -319,7 +322,7 @@
 /* VECTOR LOAD ELEMENT IMMEDIATE */
 .macro	VLEIx	vr1, imm2, m3, opc
 	VX_NUM	v1, \vr1
-	.word	0xE700 | (VX_R(v1) << 4)
+	.word	0xE700 | ((v1&15) << 4)
 	.word	\imm2
 	MRXBOPC	\m3, \opc, v1
 .endm
@@ -341,7 +344,7 @@
 	GR_NUM	r1, \gr
 	GR_NUM	b2, \base
 	VX_NUM	v3, \vr
-	.word	0xE700 | (r1 << 4) | VX_R(v3)
+	.word	0xE700 | (r1 << 4) | (v3&15)
 	.word	(b2 << 12) | (\disp)
 	MRXBOPC	\m, 0x21, v3
 .endm
@@ -363,7 +366,7 @@
 	VX_NUM	v1, \vfrom
 	VX_NUM	v3, \vto
 	GR_NUM	b2, \base	    /* Base register */
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v3)
+	.word	0xE700 | ((v1&15) << 4) | (v3&15)
 	.word	(b2 << 12) | (\disp)
 	MRXBOPC	0, 0x36, v1, v3
 .endm
@@ -373,7 +376,7 @@
 	VX_NUM	v1, \vfrom
 	VX_NUM	v3, \vto
 	GR_NUM	b2, \base	    /* Base register */
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v3)
+	.word	0xE700 | ((v1&15) << 4) | (v3&15)
 	.word	(b2 << 12) | (\disp)
 	MRXBOPC	0, 0x3E, v1, v3
 .endm
@@ -384,16 +387,16 @@
 	VX_NUM	v2, \vr2
 	VX_NUM	v3, \vr3
 	VX_NUM	v4, \vr4
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v2)
-	.word	(VX_R(v3) << 12)
-	MRXBOPC	VX_R(v4), 0x8C, v1, v2, v3, v4
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	(v4&15), 0x8C, v1, v2, v3, v4
 .endm
 
 /* VECTOR UNPACK LOGICAL LOW */
 .macro	VUPLL	vr1, vr2, m3
 	VX_NUM	v1, \vr1
 	VX_NUM	v2, \vr2
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v2)
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
 	.word	0x0000
 	MRXBOPC	\m3, 0xD4, v1, v2
 .endm
@@ -410,13 +413,23 @@
 
 /* Vector integer instructions */
 
+/* VECTOR AND */
+.macro	VN	vr1, vr2, vr3
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	0, 0x68, v1, v2, v3
+.endm
+
 /* VECTOR EXCLUSIVE OR */
 .macro	VX	vr1, vr2, vr3
 	VX_NUM	v1, \vr1
 	VX_NUM	v2, \vr2
 	VX_NUM	v3, \vr3
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v2)
-	.word	(VX_R(v3) << 12)
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
 	MRXBOPC	0, 0x6D, v1, v2, v3
 .endm
 
@@ -425,8 +438,8 @@
 	VX_NUM	v1, \vr1
 	VX_NUM	v2, \vr2
 	VX_NUM	v3, \vr3
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v2)
-	.word	(VX_R(v3) << 12)
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
 	MRXBOPC	\m4, 0xB4, v1, v2, v3
 .endm
 .macro	VGFMB	vr1, vr2, vr3
@@ -448,9 +461,9 @@
 	VX_NUM	v2, \vr2
 	VX_NUM	v3, \vr3
 	VX_NUM	v4, \vr4
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v2)
-	.word	(VX_R(v3) << 12) | (\m5 << 8)
-	MRXBOPC	VX_R(v4), 0xBC, v1, v2, v3, v4
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12) | (\m5 << 8)
+	MRXBOPC	(v4&15), 0xBC, v1, v2, v3, v4
 .endm
 .macro	VGFMAB	vr1, vr2, vr3, vr4
 	VGFMA	\vr1, \vr2, \vr3, \vr4, 0
@@ -470,11 +483,78 @@
 	VX_NUM	v1, \vr1
 	VX_NUM	v2, \vr2
 	VX_NUM	v3, \vr3
-	.word	0xE700 | (VX_R(v1) << 4) | VX_R(v2)
-	.word	(VX_R(v3) << 12)
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
 	MRXBOPC	0, 0x7D, v1, v2, v3
 .endm
 
+/* VECTOR REPLICATE IMMEDIATE */
+.macro	VREPI	vr1, imm2, m3
+	VX_NUM	v1, \vr1
+	.word	0xE700 | ((v1&15) << 4)
+	.word	\imm2
+	MRXBOPC	\m3, 0x45, v1
+.endm
+.macro	VREPIB	vr1, imm2
+	VREPI	\vr1, \imm2, 0
+.endm
+.macro	VREPIH	vr1, imm2
+	VREPI	\vr1, \imm2, 1
+.endm
+.macro	VREPIF	vr1, imm2
+	VREPI	\vr1, \imm2, 2
+.endm
+.macro	VREPIG	vr1, imm2
+	VREP	\vr1, \imm2, 3
+.endm
+
+/* VECTOR ADD */
+.macro	VA	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC	\m4, 0xF3, v1, v2, v3
+.endm
+.macro	VAB	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VAH	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VAF	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VAG	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 3
+.endm
+.macro	VAQ	vr1, vr2, vr3
+	VA	\vr1, \vr2, \vr3, 4
+.endm
+
+/* VECTOR ELEMENT SHIFT RIGHT ARITHMETIC */
+.macro	VESRAV	vr1, vr2, vr3, m4
+	VX_NUM	v1, \vr1
+	VX_NUM	v2, \vr2
+	VX_NUM	v3, \vr3
+	.word	0xE700 | ((v1&15) << 4) | (v2&15)
+	.word	((v3&15) << 12)
+	MRXBOPC \m4, 0x7A, v1, v2, v3
+.endm
+
+.macro	VESRAVB	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 0
+.endm
+.macro	VESRAVH	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 1
+.endm
+.macro	VESRAVF	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 2
+.endm
+.macro	VESRAVG	vr1, vr2, vr3
+	VESRAV	\vr1, \vr2, \vr3, 3
+.endm
 
 #endif	/* __ASSEMBLY__ */
 #endif	/* __ASM_S390_VX_INSN_H */
diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild
index 08fe6da..cc44b09 100644
--- a/arch/s390/include/uapi/asm/Kbuild
+++ b/arch/s390/include/uapi/asm/Kbuild
@@ -6,6 +6,7 @@ header-y += bitsperlong.h
 header-y += byteorder.h
 header-y += chpid.h
 header-y += chsc.h
+header-y += clp.h
 header-y += cmb.h
 header-y += dasd.h
 header-y += debug.h
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 3234817..72ccc41 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -48,6 +48,9 @@ AFLAGS_head.o		+= -march=z900
 endif
 GCOV_PROFILE_sclp.o := n
 GCOV_PROFILE_als.o := n
+UBSAN_SANITIZE_als.o := n
+UBSAN_SANITIZE_early.o := n
+UBSAN_SANITIZE_sclp.o := n
 
 obj-y	:= traps.o time.o process.o base.o early.o setup.o idle.o vtime.o
 obj-y	+= processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 1f95cc1..f3df9e0 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -125,6 +125,7 @@ int main(void)
 	OFFSET(__LC_STFL_FAC_LIST, lowcore, stfl_fac_list);
 	OFFSET(__LC_STFLE_FAC_LIST, lowcore, stfle_fac_list);
 	OFFSET(__LC_MCCK_CODE, lowcore, mcck_interruption_code);
+	OFFSET(__LC_EXT_DAMAGE_CODE, lowcore, external_damage_code);
 	OFFSET(__LC_MCCK_FAIL_STOR_ADDR, lowcore, failing_storage_address);
 	OFFSET(__LC_LAST_BREAK, lowcore, breaking_event_addr);
 	OFFSET(__LC_RST_OLD_PSW, lowcore, restart_old_psw);
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 437e611..0f9cd90 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -189,7 +189,7 @@ static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info
 	kgid_t kgid;
 
 	for (i = 0; i < group_info->ngroups; i++) {
-		kgid = GROUP_AT(group_info, i);
+		kgid = group_info->gid[i];
 		group = (u16)from_kgid_munged(user_ns, kgid);
 		if (put_user(group, grouplist+i))
 			return -EFAULT;
@@ -213,7 +213,7 @@ static int groups16_from_user(struct group_info *group_info, u16 __user *groupli
 		if (!gid_valid(kgid))
 			return -EINVAL;
 
-		GROUP_AT(group_info, i) = kgid;
+		group_info->gid[i] = kgid;
 	}
 
 	return 0;
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index 29df8484..f9293bf 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -71,9 +71,7 @@ struct save_area * __init save_area_alloc(bool is_boot_cpu)
  */
 struct save_area * __init save_area_boot_cpu(void)
 {
-	if (list_empty(&dump_save_areas))
-		return NULL;
-	return list_first_entry(&dump_save_areas, struct save_area, list);
+	return list_first_entry_or_null(&dump_save_areas, struct save_area, list);
 }
 
 /*
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 717b03a..2374c5b 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -13,7 +13,7 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/lockdep.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/pfn.h>
 #include <linux/uaccess.h>
 #include <linux/kernel.h>
diff --git a/arch/s390/kernel/fpu.c b/arch/s390/kernel/fpu.c
index 81d1d18..1235b94 100644
--- a/arch/s390/kernel/fpu.c
+++ b/arch/s390/kernel/fpu.c
@@ -10,240 +10,167 @@
 #include <asm/fpu/types.h>
 #include <asm/fpu/api.h>
 
-/*
- * Per-CPU variable to maintain FPU register ranges that are in use
- * by the kernel.
- */
-static DEFINE_PER_CPU(u32, kernel_fpu_state);
-
-#define KERNEL_FPU_STATE_MASK	(KERNEL_FPU_MASK|KERNEL_FPC)
-
+asm(".include \"asm/vx-insn.h\"\n");
 
 void __kernel_fpu_begin(struct kernel_fpu *state, u32 flags)
 {
-	if (!__this_cpu_read(kernel_fpu_state)) {
-		/*
-		 * Save user space FPU state and register contents.  Multiple
-		 * calls because of interruptions do not matter and return
-		 * immediately.  This also sets CIF_FPU to lazy restore FP/VX
-		 * register contents when returning to user space.
-		 */
-		save_fpu_regs();
-	}
-
-	/* Update flags to use the vector facility for KERNEL_FPR */
-	if (MACHINE_HAS_VX && (state->mask & KERNEL_FPR)) {
-		flags |= KERNEL_VXR_LOW | KERNEL_FPC;
-		flags &= ~KERNEL_FPR;
-	}
-
-	/* Save and update current kernel VX state */
-	state->mask = __this_cpu_read(kernel_fpu_state);
-	__this_cpu_or(kernel_fpu_state, flags & KERNEL_FPU_STATE_MASK);
-
 	/*
-	 * If this is the first call to __kernel_fpu_begin(), no additional
-	 * work is required.
+	 * Limit the save to the FPU/vector registers already
+	 * in use by the previous context
 	 */
-	if (!(state->mask & KERNEL_FPU_STATE_MASK))
-		return;
+	flags &= state->mask;
 
-	/*
-	 * If KERNEL_FPR is still set, the vector facility is not available
-	 * and, thus, save floating-point control and registers only.
-	 */
-	if (state->mask & KERNEL_FPR) {
-		asm volatile("stfpc %0" : "=Q" (state->fpc));
-		asm volatile("std 0,%0" : "=Q" (state->fprs[0]));
-		asm volatile("std 1,%0" : "=Q" (state->fprs[1]));
-		asm volatile("std 2,%0" : "=Q" (state->fprs[2]));
-		asm volatile("std 3,%0" : "=Q" (state->fprs[3]));
-		asm volatile("std 4,%0" : "=Q" (state->fprs[4]));
-		asm volatile("std 5,%0" : "=Q" (state->fprs[5]));
-		asm volatile("std 6,%0" : "=Q" (state->fprs[6]));
-		asm volatile("std 7,%0" : "=Q" (state->fprs[7]));
-		asm volatile("std 8,%0" : "=Q" (state->fprs[8]));
-		asm volatile("std 9,%0" : "=Q" (state->fprs[9]));
-		asm volatile("std 10,%0" : "=Q" (state->fprs[10]));
-		asm volatile("std 11,%0" : "=Q" (state->fprs[11]));
-		asm volatile("std 12,%0" : "=Q" (state->fprs[12]));
-		asm volatile("std 13,%0" : "=Q" (state->fprs[13]));
-		asm volatile("std 14,%0" : "=Q" (state->fprs[14]));
-		asm volatile("std 15,%0" : "=Q" (state->fprs[15]));
+	if (flags & KERNEL_FPC)
+		/* Save floating point control */
+		asm volatile("stfpc %0" : "=m" (state->fpc));
+
+	if (!MACHINE_HAS_VX) {
+		if (flags & KERNEL_VXR_V0V7) {
+			/* Save floating-point registers */
+			asm volatile("std 0,%0" : "=Q" (state->fprs[0]));
+			asm volatile("std 1,%0" : "=Q" (state->fprs[1]));
+			asm volatile("std 2,%0" : "=Q" (state->fprs[2]));
+			asm volatile("std 3,%0" : "=Q" (state->fprs[3]));
+			asm volatile("std 4,%0" : "=Q" (state->fprs[4]));
+			asm volatile("std 5,%0" : "=Q" (state->fprs[5]));
+			asm volatile("std 6,%0" : "=Q" (state->fprs[6]));
+			asm volatile("std 7,%0" : "=Q" (state->fprs[7]));
+			asm volatile("std 8,%0" : "=Q" (state->fprs[8]));
+			asm volatile("std 9,%0" : "=Q" (state->fprs[9]));
+			asm volatile("std 10,%0" : "=Q" (state->fprs[10]));
+			asm volatile("std 11,%0" : "=Q" (state->fprs[11]));
+			asm volatile("std 12,%0" : "=Q" (state->fprs[12]));
+			asm volatile("std 13,%0" : "=Q" (state->fprs[13]));
+			asm volatile("std 14,%0" : "=Q" (state->fprs[14]));
+			asm volatile("std 15,%0" : "=Q" (state->fprs[15]));
+		}
 		return;
 	}
 
-	/*
-	 * If this is a nested call to __kernel_fpu_begin(), check the saved
-	 * state mask to save and later restore the vector registers that
-	 * are already in use.	Let's start with checking floating-point
-	 * controls.
-	 */
-	if (state->mask & KERNEL_FPC)
-		asm volatile("stfpc %0" : "=m" (state->fpc));
-
 	/* Test and save vector registers */
 	asm volatile (
 		/*
 		 * Test if any vector register must be saved and, if so,
 		 * test if all register can be saved.
 		 */
-		"	tmll	%[m],15\n"	/* KERNEL_VXR_MASK */
-		"	jz	20f\n"		/* no work -> done */
 		"	la	1,%[vxrs]\n"	/* load save area */
-		"	jo	18f\n"		/* -> save V0..V31 */
-
+		"	tmll	%[m],30\n"	/* KERNEL_VXR */
+		"	jz	7f\n"		/* no work -> done */
+		"	jo	5f\n"		/* -> save V0..V31 */
 		/*
-		 * Test if V8..V23 can be saved at once... this speeds up
-		 * for KERNEL_fpu_MID only. Otherwise continue to split the
-		 * range of vector registers into two halves and test them
-		 * separately.
+		 * Test for special case KERNEL_FPU_MID only. In this
+		 * case a vstm V8..V23 is the best instruction
 		 */
-		"	tmll	%[m],6\n"	/* KERNEL_VXR_MID */
-		"	jo	17f\n"		/* -> save V8..V23 */
-
+		"	chi	%[m],12\n"	/* KERNEL_VXR_MID */
+		"	jne	0f\n"		/* -> save V8..V23 */
+		"	VSTM	8,23,128,1\n"	/* vstm %v8,%v23,128(%r1) */
+		"	j	7f\n"
 		/* Test and save the first half of 16 vector registers */
-		"1:	tmll	%[m],3\n"	/* KERNEL_VXR_LOW */
-		"	jz	10f\n"		/* -> KERNEL_VXR_HIGH */
+		"0:	tmll	%[m],6\n"	/* KERNEL_VXR_LOW */
+		"	jz	3f\n"		/* -> KERNEL_VXR_HIGH */
 		"	jo	2f\n"		/* 11 -> save V0..V15 */
-		"	brc	4,3f\n"		/* 01 -> save V0..V7  */
-		"	brc	2,4f\n"		/* 10 -> save V8..V15 */
-
+		"	brc	2,1f\n"		/* 10 -> save V8..V15 */
+		"	VSTM	0,7,0,1\n"	/* vstm %v0,%v7,0(%r1) */
+		"	j	3f\n"
+		"1:	VSTM	8,15,128,1\n"	/* vstm %v8,%v15,128(%r1) */
+		"	j	3f\n"
+		"2:	VSTM	0,15,0,1\n"	/* vstm %v0,%v15,0(%r1) */
 		/* Test and save the second half of 16 vector registers */
-		"10:	tmll	%[m],12\n"	/* KERNEL_VXR_HIGH */
-		"	jo	19f\n"		/* 11 -> save V16..V31 */
-		"	brc	4,11f\n"	/* 01 -> save V16..V23	*/
-		"	brc	2,12f\n"	/* 10 -> save V24..V31 */
-		"	j	20f\n"		/* 00 -> done */
-
-		/*
-		 * Below are the vstm combinations to save multiple vector
-		 * registers at once.
-		 */
-		"2:	.word	0xe70f,0x1000,0x003e\n"	/* vstm 0,15,0(1) */
-		"	j	10b\n"			/* -> VXR_HIGH */
-		"3:	.word	0xe707,0x1000,0x003e\n" /* vstm 0,7,0(1) */
-		"	j	10b\n"			/* -> VXR_HIGH */
-		"4:	.word	0xe78f,0x1080,0x003e\n" /* vstm 8,15,128(1) */
-		"	j	10b\n"			/* -> VXR_HIGH */
-		"\n"
-		"11:	.word	0xe707,0x1100,0x0c3e\n"	/* vstm 16,23,256(1) */
-		"	j	20f\n"			/* -> done */
-		"12:	.word	0xe78f,0x1180,0x0c3e\n" /* vstm 24,31,384(1) */
-		"	j	20f\n"			/* -> done */
-		"\n"
-		"17:	.word	0xe787,0x1080,0x043e\n"	/* vstm 8,23,128(1) */
-		"	nill	%[m],249\n"		/* m &= ~VXR_MID    */
-		"	j	1b\n"			/* -> VXR_LOW */
-		"\n"
-		"18:	.word	0xe70f,0x1000,0x003e\n"	/* vstm 0,15,0(1) */
-		"19:	.word	0xe70f,0x1100,0x0c3e\n"	/* vstm 16,31,256(1) */
-		"20:"
+		"3:	tmll	%[m],24\n"	/* KERNEL_VXR_HIGH */
+		"	jz	7f\n"
+		"	jo	6f\n"		/* 11 -> save V16..V31 */
+		"	brc	2,4f\n"		/* 10 -> save V24..V31 */
+		"	VSTM	16,23,256,1\n"	/* vstm %v16,%v23,256(%r1) */
+		"	j	7f\n"
+		"4:	VSTM	24,31,384,1\n"	/* vstm %v24,%v31,384(%r1) */
+		"	j	7f\n"
+		"5:	VSTM	0,15,0,1\n"	/* vstm %v0,%v15,0(%r1) */
+		"6:	VSTM	16,31,256,1\n"	/* vstm %v16,%v31,256(%r1) */
+		"7:"
 		: [vxrs] "=Q" (*(struct vx_array *) &state->vxrs)
-		: [m] "d" (state->mask)
+		: [m] "d" (flags)
 		: "1", "cc");
 }
 EXPORT_SYMBOL(__kernel_fpu_begin);
 
-void __kernel_fpu_end(struct kernel_fpu *state)
+void __kernel_fpu_end(struct kernel_fpu *state, u32 flags)
 {
-	/* Just update the per-CPU state if there is nothing to restore */
-	if (!(state->mask & KERNEL_FPU_STATE_MASK))
-		goto update_fpu_state;
-
 	/*
-	 * If KERNEL_FPR is specified, the vector facility is not available
-	 * and, thus, restore floating-point control and registers only.
+	 * Limit the restore to the FPU/vector registers of the
+	 * previous context that have been overwritte by the
+	 * current context
 	 */
-	if (state->mask & KERNEL_FPR) {
-		asm volatile("lfpc %0" : : "Q" (state->fpc));
-		asm volatile("ld 0,%0" : : "Q" (state->fprs[0]));
-		asm volatile("ld 1,%0" : : "Q" (state->fprs[1]));
-		asm volatile("ld 2,%0" : : "Q" (state->fprs[2]));
-		asm volatile("ld 3,%0" : : "Q" (state->fprs[3]));
-		asm volatile("ld 4,%0" : : "Q" (state->fprs[4]));
-		asm volatile("ld 5,%0" : : "Q" (state->fprs[5]));
-		asm volatile("ld 6,%0" : : "Q" (state->fprs[6]));
-		asm volatile("ld 7,%0" : : "Q" (state->fprs[7]));
-		asm volatile("ld 8,%0" : : "Q" (state->fprs[8]));
-		asm volatile("ld 9,%0" : : "Q" (state->fprs[9]));
-		asm volatile("ld 10,%0" : : "Q" (state->fprs[10]));
-		asm volatile("ld 11,%0" : : "Q" (state->fprs[11]));
-		asm volatile("ld 12,%0" : : "Q" (state->fprs[12]));
-		asm volatile("ld 13,%0" : : "Q" (state->fprs[13]));
-		asm volatile("ld 14,%0" : : "Q" (state->fprs[14]));
-		asm volatile("ld 15,%0" : : "Q" (state->fprs[15]));
-		goto update_fpu_state;
-	}
+	flags &= state->mask;
 
-	/* Test and restore floating-point controls */
-	if (state->mask & KERNEL_FPC)
+	if (flags & KERNEL_FPC)
+		/* Restore floating-point controls */
 		asm volatile("lfpc %0" : : "Q" (state->fpc));
 
+	if (!MACHINE_HAS_VX) {
+		if (flags & KERNEL_VXR_V0V7) {
+			/* Restore floating-point registers */
+			asm volatile("ld 0,%0" : : "Q" (state->fprs[0]));
+			asm volatile("ld 1,%0" : : "Q" (state->fprs[1]));
+			asm volatile("ld 2,%0" : : "Q" (state->fprs[2]));
+			asm volatile("ld 3,%0" : : "Q" (state->fprs[3]));
+			asm volatile("ld 4,%0" : : "Q" (state->fprs[4]));
+			asm volatile("ld 5,%0" : : "Q" (state->fprs[5]));
+			asm volatile("ld 6,%0" : : "Q" (state->fprs[6]));
+			asm volatile("ld 7,%0" : : "Q" (state->fprs[7]));
+			asm volatile("ld 8,%0" : : "Q" (state->fprs[8]));
+			asm volatile("ld 9,%0" : : "Q" (state->fprs[9]));
+			asm volatile("ld 10,%0" : : "Q" (state->fprs[10]));
+			asm volatile("ld 11,%0" : : "Q" (state->fprs[11]));
+			asm volatile("ld 12,%0" : : "Q" (state->fprs[12]));
+			asm volatile("ld 13,%0" : : "Q" (state->fprs[13]));
+			asm volatile("ld 14,%0" : : "Q" (state->fprs[14]));
+			asm volatile("ld 15,%0" : : "Q" (state->fprs[15]));
+		}
+		return;
+	}
+
 	/* Test and restore (load) vector registers */
 	asm volatile (
 		/*
-		 * Test if any vector registers must be loaded and, if so,
+		 * Test if any vector register must be loaded and, if so,
 		 * test if all registers can be loaded at once.
 		 */
-		"	tmll	%[m],15\n"	/* KERNEL_VXR_MASK */
-		"	jz	20f\n"		/* no work -> done */
-		"	la	1,%[vxrs]\n"	/* load load area */
-		"	jo	18f\n"		/* -> load V0..V31 */
-
-		/*
-		 * Test if V8..V23 can be restored at once... this speeds up
-		 * for KERNEL_VXR_MID only. Otherwise continue to split the
-		 * range of vector registers into two halves and test them
-		 * separately.
-		 */
-		"	tmll	%[m],6\n"	/* KERNEL_VXR_MID */
-		"	jo	17f\n"		/* -> load V8..V23 */
-
-		/* Test and load the first half of 16 vector registers */
-		"1:	tmll	%[m],3\n"	/* KERNEL_VXR_LOW */
-		"	jz	10f\n"		/* -> KERNEL_VXR_HIGH */
-		"	jo	2f\n"		/* 11 -> load V0..V15 */
-		"	brc	4,3f\n"		/* 01 -> load V0..V7  */
-		"	brc	2,4f\n"		/* 10 -> load V8..V15 */
-
-		/* Test and load the second half of 16 vector registers */
-		"10:	tmll	%[m],12\n"	/* KERNEL_VXR_HIGH */
-		"	jo	19f\n"		/* 11 -> load V16..V31 */
-		"	brc	4,11f\n"	/* 01 -> load V16..V23	*/
-		"	brc	2,12f\n"	/* 10 -> load V24..V31 */
-		"	j	20f\n"		/* 00 -> done */
-
+		"	la	1,%[vxrs]\n"	/* load restore area */
+		"	tmll	%[m],30\n"	/* KERNEL_VXR */
+		"	jz	7f\n"		/* no work -> done */
+		"	jo	5f\n"		/* -> restore V0..V31 */
 		/*
-		 * Below are the vstm combinations to load multiple vector
-		 * registers at once.
+		 * Test for special case KERNEL_FPU_MID only. In this
+		 * case a vlm V8..V23 is the best instruction
 		 */
-		"2:	.word	0xe70f,0x1000,0x0036\n"	/* vlm 0,15,0(1) */
-		"	j	10b\n"			/* -> VXR_HIGH */
-		"3:	.word	0xe707,0x1000,0x0036\n" /* vlm 0,7,0(1) */
-		"	j	10b\n"			/* -> VXR_HIGH */
-		"4:	.word	0xe78f,0x1080,0x0036\n" /* vlm 8,15,128(1) */
-		"	j	10b\n"			/* -> VXR_HIGH */
-		"\n"
-		"11:	.word	0xe707,0x1100,0x0c36\n"	/* vlm 16,23,256(1) */
-		"	j	20f\n"			/* -> done */
-		"12:	.word	0xe78f,0x1180,0x0c36\n" /* vlm 24,31,384(1) */
-		"	j	20f\n"			/* -> done */
-		"\n"
-		"17:	.word	0xe787,0x1080,0x0436\n"	/* vlm 8,23,128(1) */
-		"	nill	%[m],249\n"		/* m &= ~VXR_MID    */
-		"	j	1b\n"			/* -> VXR_LOW */
-		"\n"
-		"18:	.word	0xe70f,0x1000,0x0036\n"	/* vlm 0,15,0(1) */
-		"19:	.word	0xe70f,0x1100,0x0c36\n"	/* vlm 16,31,256(1) */
-		"20:"
-		:
-		: [vxrs] "Q" (*(struct vx_array *) &state->vxrs),
-		  [m] "d" (state->mask)
+		"	chi	%[m],12\n"	/* KERNEL_VXR_MID */
+		"	jne	0f\n"		/* -> restore V8..V23 */
+		"	VLM	8,23,128,1\n"	/* vlm %v8,%v23,128(%r1) */
+		"	j	7f\n"
+		/* Test and restore the first half of 16 vector registers */
+		"0:	tmll	%[m],6\n"	/* KERNEL_VXR_LOW */
+		"	jz	3f\n"		/* -> KERNEL_VXR_HIGH */
+		"	jo	2f\n"		/* 11 -> restore V0..V15 */
+		"	brc	2,1f\n"		/* 10 -> restore V8..V15 */
+		"	VLM	0,7,0,1\n"	/* vlm %v0,%v7,0(%r1) */
+		"	j	3f\n"
+		"1:	VLM	8,15,128,1\n"	/* vlm %v8,%v15,128(%r1) */
+		"	j	3f\n"
+		"2:	VLM	0,15,0,1\n"	/* vlm %v0,%v15,0(%r1) */
+		/* Test and restore the second half of 16 vector registers */
+		"3:	tmll	%[m],24\n"	/* KERNEL_VXR_HIGH */
+		"	jz	7f\n"
+		"	jo	6f\n"		/* 11 -> restore V16..V31 */
+		"	brc	2,4f\n"		/* 10 -> restore V24..V31 */
+		"	VLM	16,23,256,1\n"	/* vlm %v16,%v23,256(%r1) */
+		"	j	7f\n"
+		"4:	VLM	24,31,384,1\n"	/* vlm %v24,%v31,384(%r1) */
+		"	j	7f\n"
+		"5:	VLM	0,15,0,1\n"	/* vlm %v0,%v15,0(%r1) */
+		"6:	VLM	16,31,256,1\n"	/* vlm %v16,%v31,256(%r1) */
+		"7:"
+		: [vxrs] "=Q" (*(struct vx_array *) &state->vxrs)
+		: [m] "d" (flags)
 		: "1", "cc");
-
-update_fpu_state:
-	/* Update current kernel VX state */
-	__this_cpu_write(kernel_fpu_state, state->mask);
 }
 EXPORT_SYMBOL(__kernel_fpu_end);
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 0f7bfeb..60a8a4e 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -209,7 +209,8 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 	/* Only trace if the calling function expects to. */
 	if (!ftrace_graph_entry(&trace))
 		goto out;
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
+	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
+				     NULL) == -EBUSY)
 		goto out;
 	parent = (unsigned long) return_to_handler;
 out:
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index dd6306c..fdb4042 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -26,12 +26,14 @@
 #include <linux/stop_machine.h>
 #include <linux/kdebug.h>
 #include <linux/uaccess.h>
+#include <linux/extable.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/hardirq.h>
 #include <linux/ftrace.h>
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
+#include <asm/uaccess.h>
 #include <asm/dis.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe);
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index 29376f0..9a32f74 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -98,7 +98,7 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
  * returns 0 if all registers could be validated
  * returns 1 otherwise
  */
-static int notrace s390_validate_registers(union mci mci)
+static int notrace s390_validate_registers(union mci mci, int umode)
 {
 	int kill_task;
 	u64 zero;
@@ -110,26 +110,41 @@ static int notrace s390_validate_registers(union mci mci)
 	if (!mci.gr) {
 		/*
 		 * General purpose registers couldn't be restored and have
-		 * unknown contents. Process needs to be terminated.
+		 * unknown contents. Stop system or terminate process.
 		 */
+		if (!umode)
+			s390_handle_damage();
 		kill_task = 1;
 	}
 	if (!mci.fp) {
 		/*
-		 * Floating point registers can't be restored and
-		 * therefore the process needs to be terminated.
+		 * Floating point registers can't be restored. If the
+		 * kernel currently uses floating point registers the
+		 * system is stopped. If the process has its floating
+		 * pointer registers loaded it is terminated.
+		 * Otherwise just revalidate the registers.
 		 */
-		kill_task = 1;
+		if (S390_lowcore.fpu_flags & KERNEL_VXR_V0V7)
+			s390_handle_damage();
+		if (!test_cpu_flag(CIF_FPU))
+			kill_task = 1;
 	}
 	fpt_save_area = &S390_lowcore.floating_pt_save_area;
 	fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area;
 	if (!mci.fc) {
 		/*
 		 * Floating point control register can't be restored.
-		 * Task will be terminated.
+		 * If the kernel currently uses the floating pointer
+		 * registers and needs the FPC register the system is
+		 * stopped. If the process has its floating pointer
+		 * registers loaded it is terminated. Otherwiese the
+		 * FPC is just revalidated.
 		 */
+		if (S390_lowcore.fpu_flags & KERNEL_FPC)
+			s390_handle_damage();
 		asm volatile("lfpc 0(%0)" : : "a" (&zero), "m" (zero));
-		kill_task = 1;
+		if (!test_cpu_flag(CIF_FPU))
+			kill_task = 1;
 	} else
 		asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area));
 
@@ -159,10 +174,16 @@ static int notrace s390_validate_registers(union mci mci)
 
 		if (!mci.vr) {
 			/*
-			 * Vector registers can't be restored and therefore
-			 * the process needs to be terminated.
+			 * Vector registers can't be restored. If the kernel
+			 * currently uses vector registers the system is
+			 * stopped. If the process has its vector registers
+			 * loaded it is terminated. Otherwise just revalidate
+			 * the registers.
 			 */
-			kill_task = 1;
+			if (S390_lowcore.fpu_flags & KERNEL_VXR)
+				s390_handle_damage();
+			if (!test_cpu_flag(CIF_FPU))
+				kill_task = 1;
 		}
 		cr0.val = S390_lowcore.cregs_save_area[0];
 		cr0.afp = cr0.vx = 1;
@@ -250,13 +271,11 @@ void notrace s390_do_machine_check(struct pt_regs *regs)
 	struct mcck_struct *mcck;
 	unsigned long long tmp;
 	union mci mci;
-	int umode;
 
 	nmi_enter();
 	inc_irq_stat(NMI_NMI);
 	mci.val = S390_lowcore.mcck_interruption_code;
 	mcck = this_cpu_ptr(&cpu_mcck);
-	umode = user_mode(regs);
 
 	if (mci.sd) {
 		/* System damage -> stopping machine */
@@ -297,22 +316,14 @@ void notrace s390_do_machine_check(struct pt_regs *regs)
 			s390_handle_damage();
 		}
 	}
-	if (s390_validate_registers(mci)) {
-		if (umode) {
-			/*
-			 * Couldn't restore all register contents while in
-			 * user mode -> mark task for termination.
-			 */
-			mcck->kill_task = 1;
-			mcck->mcck_code = mci.val;
-			set_cpu_flag(CIF_MCCK_PENDING);
-		} else {
-			/*
-			 * Couldn't restore all register contents while in
-			 * kernel mode -> stopping machine.
-			 */
-			s390_handle_damage();
-		}
+	if (s390_validate_registers(mci, user_mode(regs))) {
+		/*
+		 * Couldn't restore all register contents for the
+		 * user space process -> mark task for termination.
+		 */
+		mcck->kill_task = 1;
+		mcck->mcck_code = mci.val;
+		set_cpu_flag(CIF_MCCK_PENDING);
 	}
 	if (mci.cd) {
 		/* Timing facility damage */
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index 050b8d0..bfda6aa 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -454,7 +454,7 @@ void s390_adjust_jiffies(void)
 			: "Q" (info->capability), "d" (10000000), "d" (0)
 			: "cc"
 			);
-		kernel_fpu_end(&fpu);
+		kernel_fpu_end(&fpu, KERNEL_FPR);
 	} else
 		/*
 		 * Really old machine without stsi block for basic
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 4e99498..0bfcc49 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -50,10 +50,6 @@
 #include <asm/cio.h>
 #include "entry.h"
 
-/* change this if you have some constant time drift */
-#define USECS_PER_JIFFY     ((unsigned long) 1000000/HZ)
-#define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
-
 u64 sched_clock_base_cc = -1;	/* Force to data section. */
 EXPORT_SYMBOL_GPL(sched_clock_base_cc);
 
@@ -282,13 +278,8 @@ extern struct timezone sys_tz;
 
 void update_vsyscall_tz(void)
 {
-	/* Make userspace gettimeofday spin until we're done. */
-	++vdso_data->tb_update_count;
-	smp_wmb();
 	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
 	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-	smp_wmb();
-	++vdso_data->tb_update_count;
 }
 
 /*
@@ -318,51 +309,12 @@ void __init time_init(void)
 	vtime_init();
 }
 
-/*
- * The time is "clock". old is what we think the time is.
- * Adjust the value by a multiple of jiffies and add the delta to ntp.
- * "delay" is an approximation how long the synchronization took. If
- * the time correction is positive, then "delay" is subtracted from
- * the time difference and only the remaining part is passed to ntp.
- */
-static unsigned long long adjust_time(unsigned long long old,
-				      unsigned long long clock,
-				      unsigned long long delay)
-{
-	unsigned long long delta, ticks;
-	struct timex adjust;
-
-	if (clock > old) {
-		/* It is later than we thought. */
-		delta = ticks = clock - old;
-		delta = ticks = (delta < delay) ? 0 : delta - delay;
-		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
-		adjust.offset = ticks * (1000000 / HZ);
-	} else {
-		/* It is earlier than we thought. */
-		delta = ticks = old - clock;
-		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
-		delta = -delta;
-		adjust.offset = -ticks * (1000000 / HZ);
-	}
-	sched_clock_base_cc += delta;
-	if (adjust.offset != 0) {
-		pr_notice("The ETR interface has adjusted the clock "
-			  "by %li microseconds\n", adjust.offset);
-		adjust.modes = ADJ_OFFSET_SINGLESHOT;
-		do_adjtimex(&adjust);
-	}
-	return delta;
-}
-
 static DEFINE_PER_CPU(atomic_t, clock_sync_word);
 static DEFINE_MUTEX(clock_sync_mutex);
 static unsigned long clock_sync_flags;
 
-#define CLOCK_SYNC_HAS_ETR	0
-#define CLOCK_SYNC_HAS_STP	1
-#define CLOCK_SYNC_ETR		2
-#define CLOCK_SYNC_STP		3
+#define CLOCK_SYNC_HAS_STP	0
+#define CLOCK_SYNC_STP		1
 
 /*
  * The get_clock function for the physical clock. It will get the current
@@ -384,34 +336,32 @@ int get_phys_clock(unsigned long long *clock)
 	if (sw0 == sw1 && (sw0 & 0x80000000U))
 		/* Success: time is in sync. */
 		return 0;
-	if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags) &&
-	    !test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+	if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
 		return -EOPNOTSUPP;
-	if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags) &&
-	    !test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+	if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
 		return -EACCES;
 	return -EAGAIN;
 }
 EXPORT_SYMBOL(get_phys_clock);
 
 /*
- * Make get_sync_clock return -EAGAIN.
+ * Make get_phys_clock() return -EAGAIN.
  */
 static void disable_sync_clock(void *dummy)
 {
 	atomic_t *sw_ptr = this_cpu_ptr(&clock_sync_word);
 	/*
-	 * Clear the in-sync bit 2^31. All get_sync_clock calls will
+	 * Clear the in-sync bit 2^31. All get_phys_clock calls will
 	 * fail until the sync bit is turned back on. In addition
 	 * increase the "sequence" counter to avoid the race of an
-	 * etr event and the complete recovery against get_sync_clock.
+	 * stp event and the complete recovery against get_phys_clock.
 	 */
 	atomic_andnot(0x80000000, sw_ptr);
 	atomic_inc(sw_ptr);
 }
 
 /*
- * Make get_sync_clock return 0 again.
+ * Make get_phys_clock() return 0 again.
  * Needs to be called from a context disabled for preemption.
  */
 static void enable_sync_clock(void)
@@ -434,7 +384,7 @@ static inline int check_sync_clock(void)
 	return rc;
 }
 
-/* Single threaded workqueue used for etr and stp sync events */
+/* Single threaded workqueue used for stp sync events */
 static struct workqueue_struct *time_sync_wq;
 
 static void __init time_init_wq(void)
@@ -448,20 +398,12 @@ struct clock_sync_data {
 	atomic_t cpus;
 	int in_sync;
 	unsigned long long fixup_cc;
-	int etr_port;
-	struct etr_aib *etr_aib;
 };
 
 static void clock_sync_cpu(struct clock_sync_data *sync)
 {
 	atomic_dec(&sync->cpus);
 	enable_sync_clock();
-	/*
-	 * This looks like a busy wait loop but it isn't. etr_sync_cpus
-	 * is called on all other cpus while the TOD clocks is stopped.
-	 * __udelay will stop the cpu on an enabled wait psw until the
-	 * TOD is running again.
-	 */
 	while (sync->in_sync == 0) {
 		__udelay(1);
 		/*
@@ -582,7 +524,7 @@ void stp_queue_work(void)
 static int stp_sync_clock(void *data)
 {
 	static int first;
-	unsigned long long old_clock, delta, new_clock, clock_delta;
+	unsigned long long clock_delta;
 	struct clock_sync_data *stp_sync;
 	struct ptff_qto qto;
 	int rc;
@@ -605,18 +547,18 @@ static int stp_sync_clock(void *data)
 	if (stp_info.todoff[0] || stp_info.todoff[1] ||
 	    stp_info.todoff[2] || stp_info.todoff[3] ||
 	    stp_info.tmd != 2) {
-		old_clock = get_tod_clock();
 		rc = chsc_sstpc(stp_page, STP_OP_SYNC, 0, &clock_delta);
 		if (rc == 0) {
-			new_clock = old_clock + clock_delta;
-			delta = adjust_time(old_clock, new_clock, 0);
+			/* fixup the monotonic sched clock */
+			sched_clock_base_cc += clock_delta;
 			if (ptff_query(PTFF_QTO) &&
 			    ptff(&qto, sizeof(qto), PTFF_QTO) == 0)
 				/* Update LPAR offset */
 				lpar_offset = qto.tod_epoch_difference;
 			atomic_notifier_call_chain(&s390_epoch_delta_notifier,
 						   0, &clock_delta);
-			fixup_clock_comparator(delta);
+			stp_sync->fixup_cc = clock_delta;
+			fixup_clock_comparator(clock_delta);
 			rc = chsc_sstpi(stp_page, &stp_info,
 					sizeof(struct stp_sstpi));
 			if (rc == 0 && stp_info.tmd != 2)
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index dd97a3e..d0539f7 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -14,11 +14,12 @@
  */
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/ptrace.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <asm/uaccess.h>
 #include <asm/fpu/api.h>
 #include "entry.h"
 
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index 6814545..6cc9478 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -24,8 +24,9 @@ obj-y += vdso32_wrapper.o
 extra-y += vdso32.lds
 CPPFLAGS_vdso32.lds += -P -C -U$(ARCH)
 
-# Disable gcov profiling for VDSO code
+# Disable gcov profiling and ubsan for VDSO code
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 # Force dependency (incbin is bad)
 $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index 0b0fd22..2d54c18 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -24,8 +24,9 @@ obj-y += vdso64_wrapper.o
 extra-y += vdso64.lds
 CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
 
-# Disable gcov profiling for VDSO code
+# Disable gcov profiling and ubsan for VDSO code
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 # Force dependency (incbin is bad)
 $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 429bfd1..000e6e91 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -35,6 +35,7 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c
index 5420020..4aa8a7e 100644
--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -495,6 +495,18 @@ static int trans_exc(struct kvm_vcpu *vcpu, int code, unsigned long gva,
 	tec = (struct trans_exc_code_bits *)&pgm->trans_exc_code;
 
 	switch (code) {
+	case PGM_PROTECTION:
+		switch (prot) {
+		case PROT_TYPE_ALC:
+			tec->b60 = 1;
+			/* FALL THROUGH */
+		case PROT_TYPE_DAT:
+			tec->b61 = 1;
+			break;
+		default: /* LA and KEYC set b61 to 0, other params undefined */
+			return code;
+		}
+		/* FALL THROUGH */
 	case PGM_ASCE_TYPE:
 	case PGM_PAGE_TRANSLATION:
 	case PGM_REGION_FIRST_TRANS:
@@ -504,8 +516,7 @@ static int trans_exc(struct kvm_vcpu *vcpu, int code, unsigned long gva,
 		/*
 		 * op_access_id only applies to MOVE_PAGE -> set bit 61
 		 * exc_access_id has to be set to 0 for some instructions. Both
-		 * cases have to be handled by the caller. We can always store
-		 * exc_access_id, as it is undefined for non-ar cases.
+		 * cases have to be handled by the caller.
 		 */
 		tec->addr = gva >> PAGE_SHIFT;
 		tec->fsi = mode == GACC_STORE ? FSI_STORE : FSI_FETCH;
@@ -516,25 +527,13 @@ static int trans_exc(struct kvm_vcpu *vcpu, int code, unsigned long gva,
 	case PGM_ASTE_VALIDITY:
 	case PGM_ASTE_SEQUENCE:
 	case PGM_EXTENDED_AUTHORITY:
+		/*
+		 * We can always store exc_access_id, as it is
+		 * undefined for non-ar cases. It is undefined for
+		 * most DAT protection exceptions.
+		 */
 		pgm->exc_access_id = ar;
 		break;
-	case PGM_PROTECTION:
-		switch (prot) {
-		case PROT_TYPE_ALC:
-			tec->b60 = 1;
-			/* FALL THROUGH */
-		case PROT_TYPE_DAT:
-			tec->b61 = 1;
-			tec->addr = gva >> PAGE_SHIFT;
-			tec->fsi = mode == GACC_STORE ? FSI_STORE : FSI_FETCH;
-			tec->as = psw_bits(vcpu->arch.sie_block->gpsw).as;
-			/* exc_access_id is undefined for most cases */
-			pgm->exc_access_id = ar;
-			break;
-		default: /* LA and KEYC set b61 to 0, other params undefined */
-			break;
-		}
-		break;
 	}
 	return code;
 }
diff --git a/arch/s390/kvm/guestdbg.c b/arch/s390/kvm/guestdbg.c
index 31a0533..d7c6a7f 100644
--- a/arch/s390/kvm/guestdbg.c
+++ b/arch/s390/kvm/guestdbg.c
@@ -206,7 +206,7 @@ static int __import_wp_info(struct kvm_vcpu *vcpu,
 int kvm_s390_import_bp_data(struct kvm_vcpu *vcpu,
 			    struct kvm_guest_debug *dbg)
 {
-	int ret = 0, nr_wp = 0, nr_bp = 0, i, size;
+	int ret = 0, nr_wp = 0, nr_bp = 0, i;
 	struct kvm_hw_breakpoint *bp_data = NULL;
 	struct kvm_hw_wp_info_arch *wp_info = NULL;
 	struct kvm_hw_bp_info_arch *bp_info = NULL;
@@ -216,17 +216,10 @@ int kvm_s390_import_bp_data(struct kvm_vcpu *vcpu,
 	else if (dbg->arch.nr_hw_bp > MAX_BP_COUNT)
 		return -EINVAL;
 
-	size = dbg->arch.nr_hw_bp * sizeof(struct kvm_hw_breakpoint);
-	bp_data = kmalloc(size, GFP_KERNEL);
-	if (!bp_data) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	if (copy_from_user(bp_data, dbg->arch.hw_bp, size)) {
-		ret = -EFAULT;
-		goto error;
-	}
+	bp_data = memdup_user(dbg->arch.hw_bp,
+			      sizeof(*bp_data) * dbg->arch.nr_hw_bp);
+	if (IS_ERR(bp_data))
+		return PTR_ERR(bp_data);
 
 	for (i = 0; i < dbg->arch.nr_hw_bp; i++) {
 		switch (bp_data[i].type) {
@@ -241,17 +234,19 @@ int kvm_s390_import_bp_data(struct kvm_vcpu *vcpu,
 		}
 	}
 
-	size = nr_wp * sizeof(struct kvm_hw_wp_info_arch);
-	if (size > 0) {
-		wp_info = kmalloc(size, GFP_KERNEL);
+	if (nr_wp > 0) {
+		wp_info = kmalloc_array(nr_wp,
+					sizeof(*wp_info),
+					GFP_KERNEL);
 		if (!wp_info) {
 			ret = -ENOMEM;
 			goto error;
 		}
 	}
-	size = nr_bp * sizeof(struct kvm_hw_bp_info_arch);
-	if (size > 0) {
-		bp_info = kmalloc(size, GFP_KERNEL);
+	if (nr_bp > 0) {
+		bp_info = kmalloc_array(nr_bp,
+					sizeof(*bp_info),
+					GFP_KERNEL);
 		if (!bp_info) {
 			ret = -ENOMEM;
 			goto error;
@@ -382,14 +377,20 @@ void kvm_s390_prepare_debug_exit(struct kvm_vcpu *vcpu)
 	vcpu->guest_debug &= ~KVM_GUESTDBG_EXIT_PENDING;
 }
 
+#define PER_CODE_MASK		(PER_EVENT_MASK >> 24)
+#define PER_CODE_BRANCH		(PER_EVENT_BRANCH >> 24)
+#define PER_CODE_IFETCH		(PER_EVENT_IFETCH >> 24)
+#define PER_CODE_STORE		(PER_EVENT_STORE >> 24)
+#define PER_CODE_STORE_REAL	(PER_EVENT_STORE_REAL >> 24)
+
 #define per_bp_event(code) \
-			(code & (PER_EVENT_IFETCH | PER_EVENT_BRANCH))
+			(code & (PER_CODE_IFETCH | PER_CODE_BRANCH))
 #define per_write_wp_event(code) \
-			(code & (PER_EVENT_STORE | PER_EVENT_STORE_REAL))
+			(code & (PER_CODE_STORE | PER_CODE_STORE_REAL))
 
 static int debug_exit_required(struct kvm_vcpu *vcpu)
 {
-	u32 perc = (vcpu->arch.sie_block->perc << 24);
+	u8 perc = vcpu->arch.sie_block->perc;
 	struct kvm_debug_exit_arch *debug_exit = &vcpu->run->debug.arch;
 	struct kvm_hw_wp_info_arch *wp_info = NULL;
 	struct kvm_hw_bp_info_arch *bp_info = NULL;
@@ -444,7 +445,7 @@ int kvm_s390_handle_per_ifetch_icpt(struct kvm_vcpu *vcpu)
 	const u8 ilen = kvm_s390_get_ilen(vcpu);
 	struct kvm_s390_pgm_info pgm_info = {
 		.code = PGM_PER,
-		.per_code = PER_EVENT_IFETCH >> 24,
+		.per_code = PER_CODE_IFETCH,
 		.per_address = __rewind_psw(vcpu->arch.sie_block->gpsw, ilen),
 	};
 
@@ -458,33 +459,33 @@ int kvm_s390_handle_per_ifetch_icpt(struct kvm_vcpu *vcpu)
 
 static void filter_guest_per_event(struct kvm_vcpu *vcpu)
 {
-	u32 perc = vcpu->arch.sie_block->perc << 24;
+	const u8 perc = vcpu->arch.sie_block->perc;
 	u64 peraddr = vcpu->arch.sie_block->peraddr;
 	u64 addr = vcpu->arch.sie_block->gpsw.addr;
 	u64 cr9 = vcpu->arch.sie_block->gcr[9];
 	u64 cr10 = vcpu->arch.sie_block->gcr[10];
 	u64 cr11 = vcpu->arch.sie_block->gcr[11];
 	/* filter all events, demanded by the guest */
-	u32 guest_perc = perc & cr9 & PER_EVENT_MASK;
+	u8 guest_perc = perc & (cr9 >> 24) & PER_CODE_MASK;
 
 	if (!guest_per_enabled(vcpu))
 		guest_perc = 0;
 
 	/* filter "successful-branching" events */
-	if (guest_perc & PER_EVENT_BRANCH &&
+	if (guest_perc & PER_CODE_BRANCH &&
 	    cr9 & PER_CONTROL_BRANCH_ADDRESS &&
 	    !in_addr_range(addr, cr10, cr11))
-		guest_perc &= ~PER_EVENT_BRANCH;
+		guest_perc &= ~PER_CODE_BRANCH;
 
 	/* filter "instruction-fetching" events */
-	if (guest_perc & PER_EVENT_IFETCH &&
+	if (guest_perc & PER_CODE_IFETCH &&
 	    !in_addr_range(peraddr, cr10, cr11))
-		guest_perc &= ~PER_EVENT_IFETCH;
+		guest_perc &= ~PER_CODE_IFETCH;
 
 	/* All other PER events will be given to the guest */
 	/* TODO: Check altered address/address space */
 
-	vcpu->arch.sie_block->perc = guest_perc >> 24;
+	vcpu->arch.sie_block->perc = guest_perc;
 
 	if (!guest_perc)
 		vcpu->arch.sie_block->iprcc &= ~PGM_PER;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index dfd0ca2..1cab8a1 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -29,6 +29,7 @@ static const intercept_handler_t instruction_handlers[256] = {
 	[0x01] = kvm_s390_handle_01,
 	[0x82] = kvm_s390_handle_lpsw,
 	[0x83] = kvm_s390_handle_diag,
+	[0xaa] = kvm_s390_handle_aa,
 	[0xae] = kvm_s390_handle_sigp,
 	[0xb2] = kvm_s390_handle_b2,
 	[0xb6] = kvm_s390_handle_stctl,
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 24524c0..be4db07 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -24,6 +24,8 @@
 #include <asm/sclp.h>
 #include <asm/isc.h>
 #include <asm/gmap.h>
+#include <asm/switch_to.h>
+#include <asm/nmi.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 #include "trace-s390.h"
@@ -40,6 +42,7 @@ static int sca_ext_call_pending(struct kvm_vcpu *vcpu, int *src_id)
 	if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_ECALL_PEND))
 		return 0;
 
+	BUG_ON(!kvm_s390_use_sca_entries());
 	read_lock(&vcpu->kvm->arch.sca_lock);
 	if (vcpu->kvm->arch.use_esca) {
 		struct esca_block *sca = vcpu->kvm->arch.sca;
@@ -68,6 +71,7 @@ static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
 {
 	int expect, rc;
 
+	BUG_ON(!kvm_s390_use_sca_entries());
 	read_lock(&vcpu->kvm->arch.sca_lock);
 	if (vcpu->kvm->arch.use_esca) {
 		struct esca_block *sca = vcpu->kvm->arch.sca;
@@ -109,6 +113,8 @@ static void sca_clear_ext_call(struct kvm_vcpu *vcpu)
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
 	int rc, expect;
 
+	if (!kvm_s390_use_sca_entries())
+		return;
 	atomic_andnot(CPUSTAT_ECALL_PEND, li->cpuflags);
 	read_lock(&vcpu->kvm->arch.sca_lock);
 	if (vcpu->kvm->arch.use_esca) {
@@ -400,12 +406,78 @@ static int __must_check __deliver_pfault_init(struct kvm_vcpu *vcpu)
 	return rc ? -EFAULT : 0;
 }
 
+static int __write_machine_check(struct kvm_vcpu *vcpu,
+				 struct kvm_s390_mchk_info *mchk)
+{
+	unsigned long ext_sa_addr;
+	freg_t fprs[NUM_FPRS];
+	union mci mci;
+	int rc;
+
+	mci.val = mchk->mcic;
+	/* take care of lazy register loading via vcpu load/put */
+	save_fpu_regs();
+	save_access_regs(vcpu->run->s.regs.acrs);
+
+	/* Extended save area */
+	rc = read_guest_lc(vcpu, __LC_VX_SAVE_AREA_ADDR, &ext_sa_addr,
+			    sizeof(unsigned long));
+	/* Only bits 0-53 are used for address formation */
+	ext_sa_addr &= ~0x3ffUL;
+	if (!rc && mci.vr && ext_sa_addr && test_kvm_facility(vcpu->kvm, 129)) {
+		if (write_guest_abs(vcpu, ext_sa_addr, vcpu->run->s.regs.vrs,
+				    512))
+			mci.vr = 0;
+	} else {
+		mci.vr = 0;
+	}
+
+	/* General interruption information */
+	rc |= put_guest_lc(vcpu, 1, (u8 __user *) __LC_AR_MODE_ID);
+	rc |= write_guest_lc(vcpu, __LC_MCK_OLD_PSW,
+			     &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
+	rc |= read_guest_lc(vcpu, __LC_MCK_NEW_PSW,
+			    &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
+	rc |= put_guest_lc(vcpu, mci.val, (u64 __user *) __LC_MCCK_CODE);
+
+	/* Register-save areas */
+	if (MACHINE_HAS_VX) {
+		convert_vx_to_fp(fprs, (__vector128 *) vcpu->run->s.regs.vrs);
+		rc |= write_guest_lc(vcpu, __LC_FPREGS_SAVE_AREA, fprs, 128);
+	} else {
+		rc |= write_guest_lc(vcpu, __LC_FPREGS_SAVE_AREA,
+				     vcpu->run->s.regs.fprs, 128);
+	}
+	rc |= write_guest_lc(vcpu, __LC_GPREGS_SAVE_AREA,
+			     vcpu->run->s.regs.gprs, 128);
+	rc |= put_guest_lc(vcpu, current->thread.fpu.fpc,
+			   (u32 __user *) __LC_FP_CREG_SAVE_AREA);
+	rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->todpr,
+			   (u32 __user *) __LC_TOD_PROGREG_SAVE_AREA);
+	rc |= put_guest_lc(vcpu, kvm_s390_get_cpu_timer(vcpu),
+			   (u64 __user *) __LC_CPU_TIMER_SAVE_AREA);
+	rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->ckc >> 8,
+			   (u64 __user *) __LC_CLOCK_COMP_SAVE_AREA);
+	rc |= write_guest_lc(vcpu, __LC_AREGS_SAVE_AREA,
+			     &vcpu->run->s.regs.acrs, 64);
+	rc |= write_guest_lc(vcpu, __LC_CREGS_SAVE_AREA,
+			     &vcpu->arch.sie_block->gcr, 128);
+
+	/* Extended interruption information */
+	rc |= put_guest_lc(vcpu, mchk->ext_damage_code,
+			   (u32 __user *) __LC_EXT_DAMAGE_CODE);
+	rc |= put_guest_lc(vcpu, mchk->failing_storage_address,
+			   (u64 __user *) __LC_MCCK_FAIL_STOR_ADDR);
+	rc |= write_guest_lc(vcpu, __LC_PSW_SAVE_AREA, &mchk->fixed_logout,
+			     sizeof(mchk->fixed_logout));
+	return rc ? -EFAULT : 0;
+}
+
 static int __must_check __deliver_machine_check(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
 	struct kvm_s390_mchk_info mchk = {};
-	unsigned long adtl_status_addr;
 	int deliver = 0;
 	int rc = 0;
 
@@ -446,29 +518,9 @@ static int __must_check __deliver_machine_check(struct kvm_vcpu *vcpu)
 		trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id,
 						 KVM_S390_MCHK,
 						 mchk.cr14, mchk.mcic);
-
-		rc  = kvm_s390_vcpu_store_status(vcpu,
-						 KVM_S390_STORE_STATUS_PREFIXED);
-		rc |= read_guest_lc(vcpu, __LC_VX_SAVE_AREA_ADDR,
-				    &adtl_status_addr,
-				    sizeof(unsigned long));
-		rc |= kvm_s390_vcpu_store_adtl_status(vcpu,
-						      adtl_status_addr);
-		rc |= put_guest_lc(vcpu, mchk.mcic,
-				   (u64 __user *) __LC_MCCK_CODE);
-		rc |= put_guest_lc(vcpu, mchk.failing_storage_address,
-				   (u64 __user *) __LC_MCCK_FAIL_STOR_ADDR);
-		rc |= write_guest_lc(vcpu, __LC_PSW_SAVE_AREA,
-				     &mchk.fixed_logout,
-				     sizeof(mchk.fixed_logout));
-		rc |= write_guest_lc(vcpu, __LC_MCK_OLD_PSW,
-				     &vcpu->arch.sie_block->gpsw,
-				     sizeof(psw_t));
-		rc |= read_guest_lc(vcpu, __LC_MCK_NEW_PSW,
-				    &vcpu->arch.sie_block->gpsw,
-				    sizeof(psw_t));
+		rc = __write_machine_check(vcpu, &mchk);
 	}
-	return rc ? -EFAULT : 0;
+	return rc;
 }
 
 static int __must_check __deliver_restart(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index f142215..9c7a1ec 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -132,10 +132,7 @@ module_param(nested, int, S_IRUGO);
 MODULE_PARM_DESC(nested, "Nested virtualization support");
 
 /* upper facilities limit for kvm */
-unsigned long kvm_s390_fac_list_mask[16] = {
-	0xffe6000000000000UL,
-	0x005e000000000000UL,
-};
+unsigned long kvm_s390_fac_list_mask[16] = { FACILITIES_KVM };
 
 unsigned long kvm_s390_fac_list_mask_size(void)
 {
@@ -248,22 +245,33 @@ static void kvm_s390_cpu_feat_init(void)
 		     PTFF_QAF);
 
 	if (test_facility(17)) { /* MSA */
-		__cpacf_query(CPACF_KMAC, kvm_s390_available_subfunc.kmac);
-		__cpacf_query(CPACF_KMC, kvm_s390_available_subfunc.kmc);
-		__cpacf_query(CPACF_KM, kvm_s390_available_subfunc.km);
-		__cpacf_query(CPACF_KIMD, kvm_s390_available_subfunc.kimd);
-		__cpacf_query(CPACF_KLMD, kvm_s390_available_subfunc.klmd);
+		__cpacf_query(CPACF_KMAC, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.kmac);
+		__cpacf_query(CPACF_KMC, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.kmc);
+		__cpacf_query(CPACF_KM, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.km);
+		__cpacf_query(CPACF_KIMD, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.kimd);
+		__cpacf_query(CPACF_KLMD, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.klmd);
 	}
 	if (test_facility(76)) /* MSA3 */
-		__cpacf_query(CPACF_PCKMO, kvm_s390_available_subfunc.pckmo);
+		__cpacf_query(CPACF_PCKMO, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.pckmo);
 	if (test_facility(77)) { /* MSA4 */
-		__cpacf_query(CPACF_KMCTR, kvm_s390_available_subfunc.kmctr);
-		__cpacf_query(CPACF_KMF, kvm_s390_available_subfunc.kmf);
-		__cpacf_query(CPACF_KMO, kvm_s390_available_subfunc.kmo);
-		__cpacf_query(CPACF_PCC, kvm_s390_available_subfunc.pcc);
+		__cpacf_query(CPACF_KMCTR, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.kmctr);
+		__cpacf_query(CPACF_KMF, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.kmf);
+		__cpacf_query(CPACF_KMO, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.kmo);
+		__cpacf_query(CPACF_PCC, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.pcc);
 	}
 	if (test_facility(57)) /* MSA5 */
-		__cpacf_query(CPACF_PPNO, kvm_s390_available_subfunc.ppno);
+		__cpacf_query(CPACF_PPNO, (cpacf_mask_t *)
+			      kvm_s390_available_subfunc.ppno);
 
 	if (MACHINE_HAS_ESOP)
 		allow_cpu_feat(KVM_S390_VM_CPU_FEAT_ESOP);
@@ -376,7 +384,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_NR_VCPUS:
 	case KVM_CAP_MAX_VCPUS:
 		r = KVM_S390_BSCA_CPU_SLOTS;
-		if (sclp.has_esca && sclp.has_64bscao)
+		if (!kvm_s390_use_sca_entries())
+			r = KVM_MAX_VCPUS;
+		else if (sclp.has_esca && sclp.has_64bscao)
 			r = KVM_S390_ESCA_CPU_SLOTS;
 		break;
 	case KVM_CAP_NR_MEMSLOTS:
@@ -1490,6 +1500,16 @@ out_err:
 	return rc;
 }
 
+bool kvm_arch_has_vcpu_debugfs(void)
+{
+	return false;
+}
+
+int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 {
 	VCPU_EVENT(vcpu, 3, "%s", "free cpu");
@@ -1553,6 +1573,8 @@ static int __kvm_ucontrol_vcpu_init(struct kvm_vcpu *vcpu)
 
 static void sca_del_vcpu(struct kvm_vcpu *vcpu)
 {
+	if (!kvm_s390_use_sca_entries())
+		return;
 	read_lock(&vcpu->kvm->arch.sca_lock);
 	if (vcpu->kvm->arch.use_esca) {
 		struct esca_block *sca = vcpu->kvm->arch.sca;
@@ -1570,6 +1592,13 @@ static void sca_del_vcpu(struct kvm_vcpu *vcpu)
 
 static void sca_add_vcpu(struct kvm_vcpu *vcpu)
 {
+	if (!kvm_s390_use_sca_entries()) {
+		struct bsca_block *sca = vcpu->kvm->arch.sca;
+
+		/* we still need the basic sca for the ipte control */
+		vcpu->arch.sie_block->scaoh = (__u32)(((__u64)sca) >> 32);
+		vcpu->arch.sie_block->scaol = (__u32)(__u64)sca;
+	}
 	read_lock(&vcpu->kvm->arch.sca_lock);
 	if (vcpu->kvm->arch.use_esca) {
 		struct esca_block *sca = vcpu->kvm->arch.sca;
@@ -1650,6 +1679,11 @@ static int sca_can_add_vcpu(struct kvm *kvm, unsigned int id)
 {
 	int rc;
 
+	if (!kvm_s390_use_sca_entries()) {
+		if (id < KVM_MAX_VCPUS)
+			return true;
+		return false;
+	}
 	if (id < KVM_S390_BSCA_CPU_SLOTS)
 		return true;
 	if (!sclp.has_esca || !sclp.has_64bscao)
@@ -1938,8 +1972,6 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 		vcpu->arch.sie_block->eca |= 1;
 	if (sclp.has_sigpif)
 		vcpu->arch.sie_block->eca |= 0x10000000U;
-	if (test_kvm_facility(vcpu->kvm, 64))
-		vcpu->arch.sie_block->ecb3 |= 0x01;
 	if (test_kvm_facility(vcpu->kvm, 129)) {
 		vcpu->arch.sie_block->eca |= 0x00020000;
 		vcpu->arch.sie_block->ecd |= 0x20000000;
@@ -2231,9 +2263,10 @@ int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 		return -EINVAL;
 	current->thread.fpu.fpc = fpu->fpc;
 	if (MACHINE_HAS_VX)
-		convert_fp_to_vx(current->thread.fpu.vxrs, (freg_t *)fpu->fprs);
+		convert_fp_to_vx((__vector128 *) vcpu->run->s.regs.vrs,
+				 (freg_t *) fpu->fprs);
 	else
-		memcpy(current->thread.fpu.fprs, &fpu->fprs, sizeof(fpu->fprs));
+		memcpy(vcpu->run->s.regs.fprs, &fpu->fprs, sizeof(fpu->fprs));
 	return 0;
 }
 
@@ -2242,9 +2275,10 @@ int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 	/* make sure we have the latest values */
 	save_fpu_regs();
 	if (MACHINE_HAS_VX)
-		convert_vx_to_fp((freg_t *)fpu->fprs, current->thread.fpu.vxrs);
+		convert_vx_to_fp((freg_t *) fpu->fprs,
+				 (__vector128 *) vcpu->run->s.regs.vrs);
 	else
-		memcpy(fpu->fprs, current->thread.fpu.fprs, sizeof(fpu->fprs));
+		memcpy(fpu->fprs, vcpu->run->s.regs.fprs, sizeof(fpu->fprs));
 	fpu->fpc = current->thread.fpu.fpc;
 	return 0;
 }
@@ -2694,6 +2728,19 @@ static void sync_regs(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (vcpu->arch.pfault_token == KVM_S390_PFAULT_TOKEN_INVALID)
 			kvm_clear_async_pf_completion_queue(vcpu);
 	}
+	/*
+	 * If userspace sets the riccb (e.g. after migration) to a valid state,
+	 * we should enable RI here instead of doing the lazy enablement.
+	 */
+	if ((kvm_run->kvm_dirty_regs & KVM_SYNC_RICCB) &&
+	    test_kvm_facility(vcpu->kvm, 64)) {
+		struct runtime_instr_cb *riccb =
+			(struct runtime_instr_cb *) &kvm_run->s.regs.riccb;
+
+		if (riccb->valid)
+			vcpu->arch.sie_block->ecb3 |= 0x01;
+	}
+
 	kvm_run->kvm_dirty_regs = 0;
 }
 
@@ -2837,38 +2884,6 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 	return kvm_s390_store_status_unloaded(vcpu, addr);
 }
 
-/*
- * store additional status at address
- */
-int kvm_s390_store_adtl_status_unloaded(struct kvm_vcpu *vcpu,
-					unsigned long gpa)
-{
-	/* Only bits 0-53 are used for address formation */
-	if (!(gpa & ~0x3ff))
-		return 0;
-
-	return write_guest_abs(vcpu, gpa & ~0x3ff,
-			       (void *)&vcpu->run->s.regs.vrs, 512);
-}
-
-int kvm_s390_vcpu_store_adtl_status(struct kvm_vcpu *vcpu, unsigned long addr)
-{
-	if (!test_kvm_facility(vcpu->kvm, 129))
-		return 0;
-
-	/*
-	 * The guest VXRS are in the host VXRs due to the lazy
-	 * copying in vcpu load/put. We can simply call save_fpu_regs()
-	 * to save the current register state because we are in the
-	 * middle of a load/put cycle.
-	 *
-	 * Let's update our copies before we save it into the save area.
-	 */
-	save_fpu_regs();
-
-	return kvm_s390_store_adtl_status_unloaded(vcpu, addr);
-}
-
 static void __disable_ibs_on_vcpu(struct kvm_vcpu *vcpu)
 {
 	kvm_check_request(KVM_REQ_ENABLE_IBS, vcpu);
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index b843286..3a4e97f 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -20,6 +20,7 @@
 #include <linux/kvm_host.h>
 #include <asm/facility.h>
 #include <asm/processor.h>
+#include <asm/sclp.h>
 
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
@@ -245,6 +246,7 @@ static inline void kvm_s390_retry_instr(struct kvm_vcpu *vcpu)
 
 /* implemented in priv.c */
 int is_valid_psw(psw_t *psw);
+int kvm_s390_handle_aa(struct kvm_vcpu *vcpu);
 int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
 int kvm_s390_handle_e5(struct kvm_vcpu *vcpu);
 int kvm_s390_handle_01(struct kvm_vcpu *vcpu);
@@ -273,10 +275,7 @@ int handle_sthyi(struct kvm_vcpu *vcpu);
 void kvm_s390_set_tod_clock(struct kvm *kvm, u64 tod);
 long kvm_arch_fault_in_page(struct kvm_vcpu *vcpu, gpa_t gpa, int writable);
 int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long addr);
-int kvm_s390_store_adtl_status_unloaded(struct kvm_vcpu *vcpu,
-					unsigned long addr);
 int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr);
-int kvm_s390_vcpu_store_adtl_status(struct kvm_vcpu *vcpu, unsigned long addr);
 void kvm_s390_vcpu_start(struct kvm_vcpu *vcpu);
 void kvm_s390_vcpu_stop(struct kvm_vcpu *vcpu);
 void kvm_s390_vcpu_block(struct kvm_vcpu *vcpu);
@@ -389,4 +388,13 @@ static inline union ipte_control *kvm_s390_get_ipte_control(struct kvm *kvm)
 
 	return &sca->ipte_control;
 }
+static inline int kvm_s390_use_sca_entries(void)
+{
+	/*
+	 * Without SIGP interpretation, only SRS interpretation (if available)
+	 * might use the entries. By not setting the entries and keeping them
+	 * invalid, hardware will not access them but intercept.
+	 */
+	return sclp.has_sigpif;
+}
 #endif
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 4616038..e184353 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -32,6 +32,24 @@
 #include "kvm-s390.h"
 #include "trace.h"
 
+static int handle_ri(struct kvm_vcpu *vcpu)
+{
+	if (test_kvm_facility(vcpu->kvm, 64)) {
+		vcpu->arch.sie_block->ecb3 |= 0x01;
+		kvm_s390_retry_instr(vcpu);
+		return 0;
+	} else
+		return kvm_s390_inject_program_int(vcpu, PGM_OPERATION);
+}
+
+int kvm_s390_handle_aa(struct kvm_vcpu *vcpu)
+{
+	if ((vcpu->arch.sie_block->ipa & 0xf) <= 4)
+		return handle_ri(vcpu);
+	else
+		return -EOPNOTSUPP;
+}
+
 /* Handle SCK (SET CLOCK) interception */
 static int handle_set_clock(struct kvm_vcpu *vcpu)
 {
@@ -1093,6 +1111,9 @@ static int handle_stctg(struct kvm_vcpu *vcpu)
 static const intercept_handler_t eb_handlers[256] = {
 	[0x2f] = handle_lctlg,
 	[0x25] = handle_stctg,
+	[0x60] = handle_ri,
+	[0x61] = handle_ri,
+	[0x62] = handle_ri,
 };
 
 int kvm_s390_handle_eb(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index c106488..d8673e2 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -584,7 +584,7 @@ static int pin_blocks(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		/* Validity 0x0044 will be checked by SIE */
 		if (rc)
 			goto unpin;
-		scb_s->gvrd = hpa;
+		scb_s->riccbd = hpa;
 	}
 	return 0;
 unpin:
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index a58bca6..661d9fe 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -24,7 +24,7 @@
 #include <linux/kdebug.h>
 #include <linux/init.h>
 #include <linux/console.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
@@ -740,28 +740,21 @@ out:
 	put_task_struct(tsk);
 }
 
-static int pfault_cpu_notify(struct notifier_block *self, unsigned long action,
-			     void *hcpu)
+static int pfault_cpu_dead(unsigned int cpu)
 {
 	struct thread_struct *thread, *next;
 	struct task_struct *tsk;
 
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_DEAD:
-		spin_lock_irq(&pfault_lock);
-		list_for_each_entry_safe(thread, next, &pfault_list, list) {
-			thread->pfault_wait = 0;
-			list_del(&thread->list);
-			tsk = container_of(thread, struct task_struct, thread);
-			wake_up_process(tsk);
-			put_task_struct(tsk);
-		}
-		spin_unlock_irq(&pfault_lock);
-		break;
-	default:
-		break;
+	spin_lock_irq(&pfault_lock);
+	list_for_each_entry_safe(thread, next, &pfault_list, list) {
+		thread->pfault_wait = 0;
+		list_del(&thread->list);
+		tsk = container_of(thread, struct task_struct, thread);
+		wake_up_process(tsk);
+		put_task_struct(tsk);
 	}
-	return NOTIFY_OK;
+	spin_unlock_irq(&pfault_lock);
+	return 0;
 }
 
 static int __init pfault_irq_init(void)
@@ -775,7 +768,8 @@ static int __init pfault_irq_init(void)
 	if (rc)
 		goto out_pfault;
 	irq_subclass_register(IRQ_SUBCLASS_SERVICE_SIGNAL);
-	hotcpu_notifier(pfault_cpu_notify, 0);
+	cpuhp_setup_state_nocalls(CPUHP_S390_PFAULT_DEAD, "s390/pfault:dead",
+				  NULL, pfault_cpu_dead);
 	return 0;
 
 out_pfault:
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 2ce6bb3..3ba6227 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -94,6 +94,7 @@ out:
 struct gmap *gmap_create(struct mm_struct *mm, unsigned long limit)
 {
 	struct gmap *gmap;
+	unsigned long gmap_asce;
 
 	gmap = gmap_alloc(limit);
 	if (!gmap)
@@ -101,6 +102,11 @@ struct gmap *gmap_create(struct mm_struct *mm, unsigned long limit)
 	gmap->mm = mm;
 	spin_lock(&mm->context.gmap_lock);
 	list_add_rcu(&gmap->list, &mm->context.gmap_list);
+	if (list_is_singular(&mm->context.gmap_list))
+		gmap_asce = gmap->asce;
+	else
+		gmap_asce = -1UL;
+	WRITE_ONCE(mm->context.gmap_asce, gmap_asce);
 	spin_unlock(&mm->context.gmap_lock);
 	return gmap;
 }
@@ -230,6 +236,7 @@ EXPORT_SYMBOL_GPL(gmap_put);
 void gmap_remove(struct gmap *gmap)
 {
 	struct gmap *sg, *next;
+	unsigned long gmap_asce;
 
 	/* Remove all shadow gmaps linked to this gmap */
 	if (!list_empty(&gmap->children)) {
@@ -243,6 +250,14 @@ void gmap_remove(struct gmap *gmap)
 	/* Remove gmap from the pre-mm list */
 	spin_lock(&gmap->mm->context.gmap_lock);
 	list_del_rcu(&gmap->list);
+	if (list_empty(&gmap->mm->context.gmap_list))
+		gmap_asce = 0;
+	else if (list_is_singular(&gmap->mm->context.gmap_list))
+		gmap_asce = list_first_entry(&gmap->mm->context.gmap_list,
+					     struct gmap, list)->asce;
+	else
+		gmap_asce = -1UL;
+	WRITE_ONCE(gmap->mm->context.gmap_asce, gmap_asce);
 	spin_unlock(&gmap->mm->context.gmap_lock);
 	synchronize_rcu();
 	/* Put reference */
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index af7cf28c..44f1503 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -309,11 +309,11 @@ static void ipte_range(pte_t *pte, unsigned long address, int nr)
 	int i;
 
 	if (test_facility(13)) {
-		__ptep_ipte_range(address, nr - 1, pte);
+		__ptep_ipte_range(address, nr - 1, pte, IPTE_GLOBAL);
 		return;
 	}
 	for (i = 0; i < nr; i++) {
-		__ptep_ipte(address, pte);
+		__ptep_ipte(address, pte, IPTE_GLOBAL);
 		address += PAGE_SIZE;
 		pte++;
 	}
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5f09201..7a1897c 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -35,9 +35,9 @@ static inline pte_t ptep_flush_direct(struct mm_struct *mm,
 	atomic_inc(&mm->context.flush_count);
 	if (MACHINE_HAS_TLB_LC &&
 	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
-		__ptep_ipte_local(addr, ptep);
+		__ptep_ipte(addr, ptep, IPTE_LOCAL);
 	else
-		__ptep_ipte(addr, ptep);
+		__ptep_ipte(addr, ptep, IPTE_GLOBAL);
 	atomic_dec(&mm->context.flush_count);
 	return old;
 }
@@ -56,7 +56,7 @@ static inline pte_t ptep_flush_lazy(struct mm_struct *mm,
 		pte_val(*ptep) |= _PAGE_INVALID;
 		mm->context.flush_mm = 1;
 	} else
-		__ptep_ipte(addr, ptep);
+		__ptep_ipte(addr, ptep, IPTE_GLOBAL);
 	atomic_dec(&mm->context.flush_count);
 	return old;
 }
@@ -301,9 +301,9 @@ static inline pmd_t pmdp_flush_direct(struct mm_struct *mm,
 	atomic_inc(&mm->context.flush_count);
 	if (MACHINE_HAS_TLB_LC &&
 	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
-		__pmdp_idte_local(addr, pmdp);
+		__pmdp_idte(addr, pmdp, IDTE_LOCAL);
 	else
-		__pmdp_idte(addr, pmdp);
+		__pmdp_idte(addr, pmdp, IDTE_GLOBAL);
 	atomic_dec(&mm->context.flush_count);
 	return old;
 }
@@ -322,7 +322,7 @@ static inline pmd_t pmdp_flush_lazy(struct mm_struct *mm,
 		pmd_val(*pmdp) |= _SEGMENT_ENTRY_INVALID;
 		mm->context.flush_mm = 1;
 	} else if (MACHINE_HAS_IDTE)
-		__pmdp_idte(addr, pmdp);
+		__pmdp_idte(addr, pmdp, IDTE_GLOBAL);
 	else
 		__pmdp_csp(pmdp);
 	atomic_dec(&mm->context.flush_count);
@@ -374,9 +374,9 @@ static inline pud_t pudp_flush_direct(struct mm_struct *mm,
 	atomic_inc(&mm->context.flush_count);
 	if (MACHINE_HAS_TLB_LC &&
 	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
-		__pudp_idte_local(addr, pudp);
+		__pudp_idte(addr, pudp, IDTE_LOCAL);
 	else
-		__pudp_idte(addr, pudp);
+		__pudp_idte(addr, pudp, IDTE_GLOBAL);
 	atomic_dec(&mm->context.flush_count);
 	return old;
 }
@@ -620,7 +620,7 @@ bool test_and_clear_guest_dirty(struct mm_struct *mm, unsigned long addr)
 	pte = *ptep;
 	if (dirty && (pte_val(pte) & _PAGE_PRESENT)) {
 		pgste = pgste_pte_notify(mm, addr, ptep, pgste);
-		__ptep_ipte(addr, ptep);
+		__ptep_ipte(addr, ptep, IPTE_GLOBAL);
 		if (MACHINE_HAS_ESOP || !(pte_val(pte) & _PAGE_WRITE))
 			pte_val(pte) |= _PAGE_PROTECT;
 		else
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 871af75..15ffc19 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -854,6 +854,15 @@ void zpci_stop_device(struct zpci_dev *zdev)
 }
 EXPORT_SYMBOL_GPL(zpci_stop_device);
 
+int zpci_report_error(struct pci_dev *pdev,
+		      struct zpci_report_error_header *report)
+{
+	struct zpci_dev *zdev = to_zpci(pdev);
+
+	return sclp_pci_report(report, zdev->fh, zdev->fid);
+}
+EXPORT_SYMBOL(zpci_report_error);
+
 static inline int barsize(u8 size)
 {
 	return (size) ? (1 << size) >> 10 : 0;
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
index 7297fce..7350c8b 100644
--- a/arch/s390/pci/pci_dma.c
+++ b/arch/s390/pci/pci_dma.c
@@ -129,12 +129,11 @@ void dma_update_cpu_trans(unsigned long *entry, void *page_addr, int flags)
 		entry_clr_protected(entry);
 }
 
-static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
-			    dma_addr_t dma_addr, size_t size, int flags)
+static int __dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
+			      dma_addr_t dma_addr, size_t size, int flags)
 {
 	unsigned int nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	u8 *page_addr = (u8 *) (pa & PAGE_MASK);
-	dma_addr_t start_dma_addr = dma_addr;
 	unsigned long irq_flags;
 	unsigned long *entry;
 	int i, rc = 0;
@@ -145,7 +144,7 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
 	spin_lock_irqsave(&zdev->dma_table_lock, irq_flags);
 	if (!zdev->dma_table) {
 		rc = -EINVAL;
-		goto no_refresh;
+		goto out_unlock;
 	}
 
 	for (i = 0; i < nr_pages; i++) {
@@ -159,20 +158,6 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
 		dma_addr += PAGE_SIZE;
 	}
 
-	/*
-	 * With zdev->tlb_refresh == 0, rpcit is not required to establish new
-	 * translations when previously invalid translation-table entries are
-	 * validated. With lazy unmap, it also is skipped for previously valid
-	 * entries, but a global rpcit is then required before any address can
-	 * be re-used, i.e. after each iommu bitmap wrap-around.
-	 */
-	if (!zdev->tlb_refresh &&
-			(!s390_iommu_strict ||
-			((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID)))
-		goto no_refresh;
-
-	rc = zpci_refresh_trans((u64) zdev->fh << 32, start_dma_addr,
-				nr_pages * PAGE_SIZE);
 undo_cpu_trans:
 	if (rc && ((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID)) {
 		flags = ZPCI_PTE_INVALID;
@@ -185,12 +170,46 @@ undo_cpu_trans:
 			dma_update_cpu_trans(entry, page_addr, flags);
 		}
 	}
-
-no_refresh:
+out_unlock:
 	spin_unlock_irqrestore(&zdev->dma_table_lock, irq_flags);
 	return rc;
 }
 
+static int __dma_purge_tlb(struct zpci_dev *zdev, dma_addr_t dma_addr,
+			   size_t size, int flags)
+{
+	/*
+	 * With zdev->tlb_refresh == 0, rpcit is not required to establish new
+	 * translations when previously invalid translation-table entries are
+	 * validated. With lazy unmap, it also is skipped for previously valid
+	 * entries, but a global rpcit is then required before any address can
+	 * be re-used, i.e. after each iommu bitmap wrap-around.
+	 */
+	if (!zdev->tlb_refresh &&
+			(!s390_iommu_strict ||
+			((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID)))
+		return 0;
+
+	return zpci_refresh_trans((u64) zdev->fh << 32, dma_addr,
+				  PAGE_ALIGN(size));
+}
+
+static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
+			    dma_addr_t dma_addr, size_t size, int flags)
+{
+	int rc;
+
+	rc = __dma_update_trans(zdev, pa, dma_addr, size, flags);
+	if (rc)
+		return rc;
+
+	rc = __dma_purge_tlb(zdev, dma_addr, size, flags);
+	if (rc && ((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID))
+		__dma_update_trans(zdev, pa, dma_addr, size, ZPCI_PTE_INVALID);
+
+	return rc;
+}
+
 void dma_free_seg_table(unsigned long entry)
 {
 	unsigned long *sto = get_rt_sto(entry);
@@ -230,45 +249,54 @@ static unsigned long __dma_alloc_iommu(struct device *dev,
 				boundary_size, 0);
 }
 
-static unsigned long dma_alloc_iommu(struct device *dev, int size)
+static dma_addr_t dma_alloc_address(struct device *dev, int size)
 {
 	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
 	unsigned long offset, flags;
-	int wrap = 0;
 
 	spin_lock_irqsave(&zdev->iommu_bitmap_lock, flags);
 	offset = __dma_alloc_iommu(dev, zdev->next_bit, size);
 	if (offset == -1) {
+		if (!zdev->tlb_refresh && !s390_iommu_strict) {
+			/* global flush before DMA addresses are reused */
+			if (zpci_refresh_global(zdev))
+				goto out_error;
+
+			bitmap_andnot(zdev->iommu_bitmap, zdev->iommu_bitmap,
+				      zdev->lazy_bitmap, zdev->iommu_pages);
+			bitmap_zero(zdev->lazy_bitmap, zdev->iommu_pages);
+		}
 		/* wrap-around */
 		offset = __dma_alloc_iommu(dev, 0, size);
-		wrap = 1;
+		if (offset == -1)
+			goto out_error;
 	}
+	zdev->next_bit = offset + size;
+	spin_unlock_irqrestore(&zdev->iommu_bitmap_lock, flags);
 
-	if (offset != -1) {
-		zdev->next_bit = offset + size;
-		if (!zdev->tlb_refresh && !s390_iommu_strict && wrap)
-			/* global flush after wrap-around with lazy unmap */
-			zpci_refresh_global(zdev);
-	}
+	return zdev->start_dma + offset * PAGE_SIZE;
+
+out_error:
 	spin_unlock_irqrestore(&zdev->iommu_bitmap_lock, flags);
-	return offset;
+	return DMA_ERROR_CODE;
 }
 
-static void dma_free_iommu(struct device *dev, unsigned long offset, int size)
+static void dma_free_address(struct device *dev, dma_addr_t dma_addr, int size)
 {
 	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
-	unsigned long flags;
+	unsigned long flags, offset;
+
+	offset = (dma_addr - zdev->start_dma) >> PAGE_SHIFT;
 
 	spin_lock_irqsave(&zdev->iommu_bitmap_lock, flags);
 	if (!zdev->iommu_bitmap)
 		goto out;
-	bitmap_clear(zdev->iommu_bitmap, offset, size);
-	/*
-	 * Lazy flush for unmap: need to move next_bit to avoid address re-use
-	 * until wrap-around.
-	 */
-	if (!s390_iommu_strict && offset >= zdev->next_bit)
-		zdev->next_bit = offset + size;
+
+	if (zdev->tlb_refresh || s390_iommu_strict)
+		bitmap_clear(zdev->iommu_bitmap, offset, size);
+	else
+		bitmap_set(zdev->lazy_bitmap, offset, size);
+
 out:
 	spin_unlock_irqrestore(&zdev->iommu_bitmap_lock, flags);
 }
@@ -289,16 +317,16 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 				     unsigned long attrs)
 {
 	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
-	unsigned long nr_pages, iommu_page_index;
 	unsigned long pa = page_to_phys(page) + offset;
 	int flags = ZPCI_PTE_VALID;
+	unsigned long nr_pages;
 	dma_addr_t dma_addr;
 	int ret;
 
 	/* This rounds up number of pages based on size and offset */
 	nr_pages = iommu_num_pages(pa, size, PAGE_SIZE);
-	iommu_page_index = dma_alloc_iommu(dev, nr_pages);
-	if (iommu_page_index == -1) {
+	dma_addr = dma_alloc_address(dev, nr_pages);
+	if (dma_addr == DMA_ERROR_CODE) {
 		ret = -ENOSPC;
 		goto out_err;
 	}
@@ -306,12 +334,6 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 	/* Use rounded up size */
 	size = nr_pages * PAGE_SIZE;
 
-	dma_addr = zdev->start_dma + iommu_page_index * PAGE_SIZE;
-	if (dma_addr + size > zdev->end_dma) {
-		ret = -ERANGE;
-		goto out_free;
-	}
-
 	if (direction == DMA_NONE || direction == DMA_TO_DEVICE)
 		flags |= ZPCI_TABLE_PROTECTED;
 
@@ -323,7 +345,7 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 	return dma_addr + (offset & ~PAGE_MASK);
 
 out_free:
-	dma_free_iommu(dev, iommu_page_index, nr_pages);
+	dma_free_address(dev, dma_addr, nr_pages);
 out_err:
 	zpci_err("map error:\n");
 	zpci_err_dma(ret, pa);
@@ -335,7 +357,6 @@ static void s390_dma_unmap_pages(struct device *dev, dma_addr_t dma_addr,
 				 unsigned long attrs)
 {
 	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
-	unsigned long iommu_page_index;
 	int npages, ret;
 
 	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
@@ -349,8 +370,7 @@ static void s390_dma_unmap_pages(struct device *dev, dma_addr_t dma_addr,
 	}
 
 	atomic64_add(npages, &zdev->unmapped_pages);
-	iommu_page_index = (dma_addr - zdev->start_dma) >> PAGE_SHIFT;
-	dma_free_iommu(dev, iommu_page_index, npages);
+	dma_free_address(dev, dma_addr, npages);
 }
 
 static void *s390_dma_alloc(struct device *dev, size_t size,
@@ -394,37 +414,98 @@ static void s390_dma_free(struct device *dev, size_t size,
 	free_pages((unsigned long) pa, get_order(size));
 }
 
-static int s390_dma_map_sg(struct device *dev, struct scatterlist *sg,
-			   int nr_elements, enum dma_data_direction dir,
-			   unsigned long attrs)
+/* Map a segment into a contiguous dma address area */
+static int __s390_dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     size_t size, dma_addr_t *handle,
+			     enum dma_data_direction dir)
 {
-	int mapped_elements = 0;
+	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
+	dma_addr_t dma_addr_base, dma_addr;
+	int flags = ZPCI_PTE_VALID;
 	struct scatterlist *s;
-	int i;
+	unsigned long pa;
+	int ret;
 
-	for_each_sg(sg, s, nr_elements, i) {
-		struct page *page = sg_page(s);
-		s->dma_address = s390_dma_map_pages(dev, page, s->offset,
-						    s->length, dir, 0);
-		if (!dma_mapping_error(dev, s->dma_address)) {
-			s->dma_length = s->length;
-			mapped_elements++;
-		} else
+	size = PAGE_ALIGN(size);
+	dma_addr_base = dma_alloc_address(dev, size >> PAGE_SHIFT);
+	if (dma_addr_base == DMA_ERROR_CODE)
+		return -ENOMEM;
+
+	dma_addr = dma_addr_base;
+	if (dir == DMA_NONE || dir == DMA_TO_DEVICE)
+		flags |= ZPCI_TABLE_PROTECTED;
+
+	for (s = sg; dma_addr < dma_addr_base + size; s = sg_next(s)) {
+		pa = page_to_phys(sg_page(s)) + s->offset;
+		ret = __dma_update_trans(zdev, pa, dma_addr, s->length, flags);
+		if (ret)
 			goto unmap;
+
+		dma_addr += s->length;
 	}
-out:
-	return mapped_elements;
+	ret = __dma_purge_tlb(zdev, dma_addr_base, size, flags);
+	if (ret)
+		goto unmap;
+
+	*handle = dma_addr_base;
+	atomic64_add(size >> PAGE_SHIFT, &zdev->mapped_pages);
+
+	return ret;
 
 unmap:
-	for_each_sg(sg, s, mapped_elements, i) {
-		if (s->dma_address)
-			s390_dma_unmap_pages(dev, s->dma_address, s->dma_length,
-					     dir, 0);
-		s->dma_address = 0;
+	dma_update_trans(zdev, 0, dma_addr_base, dma_addr - dma_addr_base,
+			 ZPCI_PTE_INVALID);
+	dma_free_address(dev, dma_addr_base, size >> PAGE_SHIFT);
+	zpci_err("map error:\n");
+	zpci_err_dma(ret, pa);
+	return ret;
+}
+
+static int s390_dma_map_sg(struct device *dev, struct scatterlist *sg,
+			   int nr_elements, enum dma_data_direction dir,
+			   unsigned long attrs)
+{
+	struct scatterlist *s = sg, *start = sg, *dma = sg;
+	unsigned int max = dma_get_max_seg_size(dev);
+	unsigned int size = s->offset + s->length;
+	unsigned int offset = s->offset;
+	int count = 0, i;
+
+	for (i = 1; i < nr_elements; i++) {
+		s = sg_next(s);
+
+		s->dma_address = DMA_ERROR_CODE;
 		s->dma_length = 0;
+
+		if (s->offset || (size & ~PAGE_MASK) ||
+		    size + s->length > max) {
+			if (__s390_dma_map_sg(dev, start, size,
+					      &dma->dma_address, dir))
+				goto unmap;
+
+			dma->dma_address += offset;
+			dma->dma_length = size - offset;
+
+			size = offset = s->offset;
+			start = s;
+			dma = sg_next(dma);
+			count++;
+		}
+		size += s->length;
 	}
-	mapped_elements = 0;
-	goto out;
+	if (__s390_dma_map_sg(dev, start, size, &dma->dma_address, dir))
+		goto unmap;
+
+	dma->dma_address += offset;
+	dma->dma_length = size - offset;
+
+	return count + 1;
+unmap:
+	for_each_sg(sg, s, count, i)
+		s390_dma_unmap_pages(dev, sg_dma_address(s), sg_dma_len(s),
+				     dir, attrs);
+
+	return 0;
 }
 
 static void s390_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
@@ -435,8 +516,9 @@ static void s390_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int i;
 
 	for_each_sg(sg, s, nr_elements, i) {
-		s390_dma_unmap_pages(dev, s->dma_address, s->dma_length, dir,
-				     0);
+		if (s->dma_length)
+			s390_dma_unmap_pages(dev, s->dma_address, s->dma_length,
+					     dir, attrs);
 		s->dma_address = 0;
 		s->dma_length = 0;
 	}
@@ -482,7 +564,14 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 		rc = -ENOMEM;
 		goto free_dma_table;
 	}
+	if (!zdev->tlb_refresh && !s390_iommu_strict) {
+		zdev->lazy_bitmap = vzalloc(zdev->iommu_pages / 8);
+		if (!zdev->lazy_bitmap) {
+			rc = -ENOMEM;
+			goto free_bitmap;
+		}
 
+	}
 	rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				(u64) zdev->dma_table);
 	if (rc)
@@ -492,6 +581,8 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 free_bitmap:
 	vfree(zdev->iommu_bitmap);
 	zdev->iommu_bitmap = NULL;
+	vfree(zdev->lazy_bitmap);
+	zdev->lazy_bitmap = NULL;
 free_dma_table:
 	dma_free_cpu_table(zdev->dma_table);
 	zdev->dma_table = NULL;
@@ -513,6 +604,9 @@ void zpci_dma_exit_device(struct zpci_dev *zdev)
 	zdev->dma_table = NULL;
 	vfree(zdev->iommu_bitmap);
 	zdev->iommu_bitmap = NULL;
+	vfree(zdev->lazy_bitmap);
+	zdev->lazy_bitmap = NULL;
+
 	zdev->next_bit = 0;
 }
 
diff --git a/arch/score/include/asm/extable.h b/arch/score/include/asm/extable.h
new file mode 100644
index 0000000..c4423ccf
--- /dev/null
+++ b/arch/score/include/asm/extable.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SCORE_EXTABLE_H
+#define _ASM_SCORE_EXTABLE_H
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+struct pt_regs;
+extern int fixup_exception(struct pt_regs *regs);
+#endif
diff --git a/arch/score/include/asm/module.h b/arch/score/include/asm/module.h
index abf395b..6dc1f29 100644
--- a/arch/score/include/asm/module.h
+++ b/arch/score/include/asm/module.h
@@ -2,7 +2,7 @@
 #define _ASM_SCORE_MODULE_H
 
 #include <linux/list.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 #include <asm-generic/module.h>
 
 struct mod_arch_specific {
diff --git a/arch/score/include/asm/uaccess.h b/arch/score/include/asm/uaccess.h
index 20a3591..db58ab9 100644
--- a/arch/score/include/asm/uaccess.h
+++ b/arch/score/include/asm/uaccess.h
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/thread_info.h>
+#include <asm/extable.h>
 
 #define VERIFY_READ		0
 #define VERIFY_WRITE		1
@@ -163,7 +164,7 @@ do {									\
 		__get_user_asm(val, "lw", ptr);				\
 		 break;							\
 	case 8: 							\
-		if ((copy_from_user((void *)&val, ptr, 8)) == 0)	\
+		if (__copy_from_user((void *)&val, ptr, 8) == 0)	\
 			__gu_err = 0;					\
 		else							\
 			__gu_err = -EFAULT;				\
@@ -188,6 +189,8 @@ do {									\
 									\
 	if (likely(access_ok(VERIFY_READ, __gu_ptr, size)))		\
 		__get_user_common((x), size, __gu_ptr);			\
+	else								\
+		(x) = 0;						\
 									\
 	__gu_err;							\
 })
@@ -201,6 +204,7 @@ do {									\
 		"2:\n"							\
 		".section .fixup,\"ax\"\n"				\
 		"3:li	%0, %4\n"					\
+		"li	%1, 0\n"					\
 		"j	2b\n"						\
 		".previous\n"						\
 		".section __ex_table,\"a\"\n"				\
@@ -298,35 +302,34 @@ extern int __copy_tofrom_user(void *to, const void *from, unsigned long len);
 static inline unsigned long
 copy_from_user(void *to, const void *from, unsigned long len)
 {
-	unsigned long over;
+	unsigned long res = len;
 
-	if (access_ok(VERIFY_READ, from, len))
-		return __copy_tofrom_user(to, from, len);
+	if (likely(access_ok(VERIFY_READ, from, len)))
+		res = __copy_tofrom_user(to, from, len);
 
-	if ((unsigned long)from < TASK_SIZE) {
-		over = (unsigned long)from + len - TASK_SIZE;
-		return __copy_tofrom_user(to, from, len - over) + over;
-	}
-	return len;
+	if (unlikely(res))
+		memset(to + (len - res), 0, res);
+
+	return res;
 }
 
 static inline unsigned long
 copy_to_user(void *to, const void *from, unsigned long len)
 {
-	unsigned long over;
+	if (likely(access_ok(VERIFY_WRITE, to, len)))
+		len = __copy_tofrom_user(to, from, len);
 
-	if (access_ok(VERIFY_WRITE, to, len))
-		return __copy_tofrom_user(to, from, len);
-
-	if ((unsigned long)to < TASK_SIZE) {
-		over = (unsigned long)to + len - TASK_SIZE;
-		return __copy_tofrom_user(to, from, len - over) + over;
-	}
 	return len;
 }
 
-#define __copy_from_user(to, from, len)	\
-		__copy_tofrom_user((to), (from), (len))
+static inline unsigned long
+__copy_from_user(void *to, const void *from, unsigned long len)
+{
+	unsigned long left = __copy_tofrom_user(to, from, len);
+	if (unlikely(left))
+		memset(to + (len - left), 0, left);
+	return left;
+}
 
 #define __copy_to_user(to, from, len)		\
 		__copy_tofrom_user((to), (from), (len))
@@ -340,17 +343,17 @@ __copy_to_user_inatomic(void *to, const void *from, unsigned long len)
 static inline unsigned long
 __copy_from_user_inatomic(void *to, const void *from, unsigned long len)
 {
-	return __copy_from_user(to, from, len);
+	return __copy_tofrom_user(to, from, len);
 }
 
-#define __copy_in_user(to, from, len)	__copy_from_user(to, from, len)
+#define __copy_in_user(to, from, len)	__copy_tofrom_user(to, from, len)
 
 static inline unsigned long
 copy_in_user(void *to, const void *from, unsigned long len)
 {
 	if (access_ok(VERIFY_READ, from, len) &&
 		      access_ok(VERFITY_WRITE, to, len))
-		return copy_from_user(to, from, len);
+		return __copy_tofrom_user(to, from, len);
 }
 
 /*
@@ -418,12 +421,5 @@ static inline long strnlen_user(const char __user *str, long len)
 		return __strnlen_user(str, len);
 }
 
-struct exception_table_entry {
-	unsigned long insn;
-	unsigned long fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
 #endif /* __SCORE_UACCESS_H */
 
diff --git a/arch/score/kernel/vmlinux.lds.S b/arch/score/kernel/vmlinux.lds.S
index 7274b5c..4117890 100644
--- a/arch/score/kernel/vmlinux.lds.S
+++ b/arch/score/kernel/vmlinux.lds.S
@@ -40,6 +40,7 @@ SECTIONS
 		_text = .;	/* Text and read-only data */
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		*(.text.*)
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
index caea2c4..1d159ce 100644
--- a/arch/sh/include/asm/atomic-llsc.h
+++ b/arch/sh/include/asm/atomic-llsc.h
@@ -60,7 +60,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 "	movco.l	%0, @%3					\n"		\
 "	bf	1b					\n"		\
 "	synco						\n"		\
-	: "=&z" (temp), "=&z" (res)					\
+	: "=&z" (temp), "=&r" (res)					\
 	: "r" (i), "r" (&v->counter)					\
 	: "t");								\
 									\
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index a49635c..a38d0c7 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -151,7 +151,10 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
 	__kernel_size_t __copy_size = (__kernel_size_t) n;
 
 	if (__copy_size && __access_ok(__copy_from, __copy_size))
-		return __copy_user(to, from, __copy_size);
+		__copy_size = __copy_user(to, from, __copy_size);
+
+	if (unlikely(__copy_size))
+		memset(to + (n - __copy_size), 0, __copy_size);
 
 	return __copy_size;
 }
@@ -189,8 +192,6 @@ struct exception_table_entry {
 #endif
 
 int fixup_exception(struct pt_regs *regs);
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-unsigned long search_exception_table(unsigned long addr);
 const struct exception_table_entry *search_exception_tables(unsigned long addr);
 
 extern void *set_exception_table_vec(unsigned int vec, void *handler);
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index c01376c..ca5073d 100644
--- a/arch/sh/include/asm/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -24,6 +24,7 @@
 #define __get_user_size(x,ptr,size,retval)			\
 do {								\
 	retval = 0;						\
+	x = 0;							\
 	switch (size) {						\
 	case 1:							\
 		retval = __get_user_asm_b((void *)&x,		\
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 839612c..0d3637c 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -122,32 +122,16 @@ static void shx3_update_boot_vector(unsigned int cpu)
 	__raw_writel(STBCR_RESET, STBCR_REG(cpu));
 }
 
-static int
-shx3_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+static int shx3_cpu_prepare(unsigned int cpu)
 {
-	unsigned int cpu = (unsigned int)hcpu;
-
-	switch (action) {
-	case CPU_UP_PREPARE:
-		shx3_update_boot_vector(cpu);
-		break;
-	case CPU_ONLINE:
-		pr_info("CPU %u is now online\n", cpu);
-		break;
-	case CPU_DEAD:
-		break;
-	}
-
-	return NOTIFY_OK;
+	shx3_update_boot_vector(cpu);
+	return 0;
 }
 
-static struct notifier_block shx3_cpu_notifier = {
-	.notifier_call		= shx3_cpu_callback,
-};
-
 static int register_shx3_cpu_notifier(void)
 {
-	register_hotcpu_notifier(&shx3_cpu_notifier);
+	cpuhp_setup_state_nocalls(CPUHP_SH_SH3X_PREPARE, "sh/shx3:prepare",
+				  shx3_cpu_prepare, NULL);
 	return 0;
 }
 late_initcall(register_shx3_cpu_notifier);
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 38993e0..5378397 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -139,7 +139,7 @@ static void ftrace_mod_code(void)
 		clear_mod_flag();
 }
 
-void ftrace_nmi_enter(void)
+void arch_ftrace_nmi_enter(void)
 {
 	if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
 		smp_rmb();
@@ -150,7 +150,7 @@ void ftrace_nmi_enter(void)
 	smp_mb();
 }
 
-void ftrace_nmi_exit(void)
+void arch_ftrace_nmi_exit(void)
 {
 	/* Finish all executions before clearing nmi_running */
 	smp_mb();
@@ -382,7 +382,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}
 
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0);
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
 	if (err == -EBUSY) {
 		__raw_writel(old, parent);
 		return;
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 235a410..5b9a3cc 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -36,6 +36,7 @@ SECTIONS
 		TEXT_TEXT
 		EXTRA_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 59b0960..b23c76b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -22,7 +22,6 @@ config SPARC
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_EXIT_THREAD
 	select SYSCTL_EXCEPTION_TRACE
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 	select RTC_SYSTOHC
@@ -56,7 +55,6 @@ config SPARC64
 	def_bool 64BIT
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_FUNCTION_GRAPH_FP_TEST
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
 	select HAVE_RCU_TABLE_FREE if SMP
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 9331083..3f2d403 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -7,7 +7,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/processor.h>
-#include <asm/uaccess.h>
+#include <asm/extable_64.h>
 #include <asm/spitfire.h>
 
 /*
diff --git a/arch/sparc/include/asm/extable_64.h b/arch/sparc/include/asm/extable_64.h
new file mode 100644
index 0000000..1121cb0
--- /dev/null
+++ b/arch/sparc/include/asm/extable_64.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_EXTABLE64_H
+#define __ASM_EXTABLE64_H
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+        unsigned int insn, fixup;
+};
+
+#endif
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
index 3192a8e..62755a3 100644
--- a/arch/sparc/include/asm/ftrace.h
+++ b/arch/sparc/include/asm/ftrace.h
@@ -9,6 +9,10 @@
 void _mcount(void);
 #endif
 
+#endif /* CONFIG_MCOUNT */
+
+#if defined(CONFIG_SPARC64) && !defined(CC_USE_FENTRY)
+#define HAVE_FUNCTION_GRAPH_FP_TEST
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
index f5b6537..666d5ba 100644
--- a/arch/sparc/include/asm/hypervisor.h
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -1744,6 +1744,7 @@ unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
 
 #define HV_PCI_MAP_ATTR_READ		0x01
 #define HV_PCI_MAP_ATTR_WRITE		0x02
+#define HV_PCI_MAP_ATTR_RELAXED_ORDER	0x04
 
 #define HV_PCI_DEVICE_BUILD(b,d,f)	\
 	((((b) & 0xff) << 16) | \
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 3f70f90..1d51a11 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -86,8 +86,9 @@ static inline unsigned long get_softint(void)
 	return retval;
 }
 
-void arch_trigger_all_cpu_backtrace(bool);
-#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
+void arch_trigger_cpumask_backtrace(const struct cpumask *mask,
+				    bool exclude_self);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 
 extern void *hardirq_stack[NR_CPUS];
 extern void *softirq_stack[NR_CPUS];
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
index 8c2a8c9..c1263fc 100644
--- a/arch/sparc/include/asm/page_64.h
+++ b/arch/sparc/include/asm/page_64.h
@@ -25,6 +25,7 @@
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1UL))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#define REAL_HPAGE_PER_HPAGE	(_AC(1,UL) << (HPAGE_SHIFT - REAL_HPAGE_SHIFT))
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
index 26d9e77..ce2233f 100644
--- a/arch/sparc/include/asm/smp_64.h
+++ b/arch/sparc/include/asm/smp_64.h
@@ -43,6 +43,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 int hard_smp_processor_id(void);
 #define raw_smp_processor_id() (current_thread_info()->cpu)
 
+void smp_fill_in_cpu_possible_map(void);
 void smp_fill_in_sib_core_maps(void);
 void cpu_play_dead(void);
 
@@ -72,6 +73,7 @@ void __cpu_die(unsigned int cpu);
 #define smp_fill_in_sib_core_maps() do { } while (0)
 #define smp_fetch_global_regs() do { } while (0)
 #define smp_fetch_global_pmu() do { } while (0)
+#define smp_fill_in_cpu_possible_map() do { } while (0)
 
 #endif /* !(CONFIG_SMP) */
 
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 341a5a1..ea55f86 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -249,8 +249,7 @@ unsigned long __copy_user(void __user *to, const void __user *from, unsigned lon
 static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	if (n && __access_ok((unsigned long) to, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(from, n, true);
+		check_object_size(from, n, true);
 		return __copy_user(to, (__force void __user *) from, n);
 	} else
 		return n;
@@ -258,19 +257,19 @@ static inline unsigned long copy_to_user(void __user *to, const void *from, unsi
 
 static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	if (!__builtin_constant_p(n))
-		check_object_size(from, n, true);
+	check_object_size(from, n, true);
 	return __copy_user(to, (__force void __user *) from, n);
 }
 
 static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	if (n && __access_ok((unsigned long) from, n)) {
-		if (!__builtin_constant_p(n))
-			check_object_size(to, n, false);
+		check_object_size(to, n, false);
 		return __copy_user((__force void __user *) to, from, n);
-	} else
+	} else {
+		memset(to, 0, n);
 		return n;
+	}
 }
 
 static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 8bda94f..b68acc5 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -13,6 +13,7 @@
 #include <asm/asi.h>
 #include <asm/spitfire.h>
 #include <asm-generic/uaccess-unaligned.h>
+#include <asm/extable_64.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -81,23 +82,6 @@ static inline int access_ok(int type, const void __user * addr, unsigned long si
 	return 1;
 }
 
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-        unsigned int insn, fixup;
-};
-
 void __ret_efault(void);
 void __retl_efault(void);
 
@@ -212,8 +196,7 @@ copy_from_user(void *to, const void __user *from, unsigned long size)
 {
 	unsigned long ret;
 
-	if (!__builtin_constant_p(size))
-		check_object_size(to, size, false);
+	check_object_size(to, size, false);
 
 	ret = ___copy_from_user(to, from, size);
 	if (unlikely(ret))
@@ -233,8 +216,8 @@ copy_to_user(void __user *to, const void *from, unsigned long size)
 {
 	unsigned long ret;
 
-	if (!__builtin_constant_p(size))
-		check_object_size(from, size, true);
+	check_object_size(from, size, true);
+
 	ret = ___copy_to_user(to, from, size);
 	if (unlikely(ret))
 		ret = copy_to_user_fixup(to, from, size);
diff --git a/arch/sparc/kernel/ftrace.c b/arch/sparc/kernel/ftrace.c
index 0a2d2dd..6bcff69 100644
--- a/arch/sparc/kernel/ftrace.c
+++ b/arch/sparc/kernel/ftrace.c
@@ -131,7 +131,7 @@ unsigned long prepare_ftrace_return(unsigned long parent,
 		return parent + 8UL;
 
 	if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
-				     frame_pointer) == -EBUSY)
+				     frame_pointer, NULL) == -EBUSY)
 		return parent + 8UL;
 
 	trace.func = self_addr;
diff --git a/arch/sparc/kernel/kprobes.c b/arch/sparc/kernel/kprobes.c
index cd83be5..b0377db 100644
--- a/arch/sparc/kernel/kprobes.c
+++ b/arch/sparc/kernel/kprobes.c
@@ -5,7 +5,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/kdebug.h>
 #include <linux/slab.h>
 #include <linux/context_tracking.h>
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 61c6f93..db57d8a 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -30,8 +30,19 @@
 #define DRIVER_NAME	"pci_sun4v"
 #define PFX		DRIVER_NAME ": "
 
-static unsigned long vpci_major = 1;
-static unsigned long vpci_minor = 1;
+static unsigned long vpci_major;
+static unsigned long vpci_minor;
+
+struct vpci_version {
+	unsigned long major;
+	unsigned long minor;
+};
+
+/* Ordered from largest major to lowest */
+static struct vpci_version vpci_versions[] = {
+	{ .major = 2, .minor = 0 },
+	{ .major = 1, .minor = 1 },
+};
 
 #define PGLIST_NENTS	(PAGE_SIZE / sizeof(u64))
 
@@ -67,6 +78,10 @@ static long iommu_batch_flush(struct iommu_batch *p)
 	u64 *pglist = p->pglist;
 	unsigned long npages = p->npages;
 
+	/* VPCI maj=1, min=[0,1] only supports read and write */
+	if (vpci_major < 2)
+		prot &= (HV_PCI_MAP_ATTR_READ | HV_PCI_MAP_ATTR_WRITE);
+
 	while (npages != 0) {
 		long num;
 
@@ -133,6 +148,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
 				   unsigned long attrs)
 {
 	unsigned long flags, order, first_page, npages, n;
+	unsigned long prot = 0;
 	struct iommu *iommu;
 	struct page *page;
 	void *ret;
@@ -146,6 +162,9 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
 
 	npages = size >> IO_PAGE_SHIFT;
 
+	if (attrs & DMA_ATTR_WEAK_ORDERING)
+		prot = HV_PCI_MAP_ATTR_RELAXED_ORDER;
+
 	nid = dev->archdata.numa_node;
 	page = alloc_pages_node(nid, gfp, order);
 	if (unlikely(!page))
@@ -169,7 +188,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size,
 	local_irq_save(flags);
 
 	iommu_batch_start(dev,
-			  (HV_PCI_MAP_ATTR_READ |
+			  (HV_PCI_MAP_ATTR_READ | prot |
 			   HV_PCI_MAP_ATTR_WRITE),
 			  entry);
 
@@ -266,6 +285,9 @@ static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
 	if (direction != DMA_TO_DEVICE)
 		prot |= HV_PCI_MAP_ATTR_WRITE;
 
+	if (attrs & DMA_ATTR_WEAK_ORDERING)
+		prot |= HV_PCI_MAP_ATTR_RELAXED_ORDER;
+
 	local_irq_save(flags);
 
 	iommu_batch_start(dev, prot, entry);
@@ -344,6 +366,9 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 	if (direction != DMA_TO_DEVICE)
 		prot |= HV_PCI_MAP_ATTR_WRITE;
 
+	if (attrs & DMA_ATTR_WEAK_ORDERING)
+		prot |= HV_PCI_MAP_ATTR_RELAXED_ORDER;
+
 	outs = s = segstart = &sglist[0];
 	outcount = 1;
 	incount = nelems;
@@ -907,22 +932,27 @@ static int pci_sun4v_probe(struct platform_device *op)
 	struct device_node *dp;
 	struct iommu *iommu;
 	u32 devhandle;
-	int i, err;
+	int i, err = -ENODEV;
 
 	dp = op->dev.of_node;
 
 	if (!hvapi_negotiated++) {
-		err = sun4v_hvapi_register(HV_GRP_PCI,
-					   vpci_major,
-					   &vpci_minor);
+		for (i = 0; i < ARRAY_SIZE(vpci_versions); i++) {
+			vpci_major = vpci_versions[i].major;
+			vpci_minor = vpci_versions[i].minor;
+
+			err = sun4v_hvapi_register(HV_GRP_PCI, vpci_major,
+						   &vpci_minor);
+			if (!err)
+				break;
+		}
 
 		if (err) {
-			printk(KERN_ERR PFX "Could not register hvapi, "
-			       "err=%d\n", err);
+			pr_err(PFX "Could not register hvapi, err=%d\n", err);
 			return err;
 		}
-		printk(KERN_INFO PFX "Registered hvapi major[%lu] minor[%lu]\n",
-		       vpci_major, vpci_minor);
+		pr_info(PFX "Registered hvapi major[%lu] minor[%lu]\n",
+			vpci_major, vpci_minor);
 
 		dma_ops = &sun4v_dma_ops;
 	}
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index fa14402..47ff558 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -239,7 +239,7 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-void arch_trigger_all_cpu_backtrace(bool include_self)
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
@@ -255,15 +255,15 @@ void arch_trigger_all_cpu_backtrace(bool include_self)
 
 	memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot));
 
-	if (include_self)
+	if (cpumask_test_cpu(this_cpu, mask) && !exclude_self)
 		__global_reg_self(tp, regs, this_cpu);
 
 	smp_fetch_global_regs();
 
-	for_each_online_cpu(cpu) {
+	for_each_cpu(cpu, mask) {
 		struct global_reg_snapshot *gp;
 
-		if (!include_self && cpu == this_cpu)
+		if (exclude_self && cpu == this_cpu)
 			continue;
 
 		gp = &global_cpu_snapshot[cpu].reg;
@@ -300,7 +300,7 @@ void arch_trigger_all_cpu_backtrace(bool include_self)
 
 static void sysrq_handle_globreg(int key)
 {
-	arch_trigger_all_cpu_backtrace(true);
+	trigger_all_cpu_backtrace();
 }
 
 static struct sysrq_key_op sparc_globalreg_op = {
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 599f120..6b7331d 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -31,6 +31,7 @@
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/start_kernel.h>
+#include <linux/bootmem.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -50,6 +51,8 @@
 #include <asm/elf.h>
 #include <asm/mdesc.h>
 #include <asm/cacheflush.h>
+#include <asm/dma.h>
+#include <asm/irq.h>
 
 #ifdef CONFIG_IP_PNP
 #include <net/ipconfig.h>
@@ -590,6 +593,22 @@ static void __init init_sparc64_elf_hwcap(void)
 		pause_patch();
 }
 
+void __init alloc_irqstack_bootmem(void)
+{
+	unsigned int i, node;
+
+	for_each_possible_cpu(i) {
+		node = cpu_to_node(i);
+
+		softirq_stack[i] = __alloc_bootmem_node(NODE_DATA(node),
+							THREAD_SIZE,
+							THREAD_SIZE, 0);
+		hardirq_stack[i] = __alloc_bootmem_node(NODE_DATA(node),
+							THREAD_SIZE,
+							THREAD_SIZE, 0);
+	}
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	/* Initialize PROM console and command line. */
@@ -650,6 +669,13 @@ void __init setup_arch(char **cmdline_p)
 
 	paging_init();
 	init_sparc64_elf_hwcap();
+	smp_fill_in_cpu_possible_map();
+	/*
+	 * Once the OF device tree and MDESC have been setup and nr_cpus has
+	 * been parsed, we know the list of possible cpus.  Therefore we can
+	 * allocate the IRQ stacks.
+	 */
+	alloc_irqstack_bootmem();
 }
 
 extern int stop_a_enabled;
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index fb30e7c..e80e6ba 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -352,9 +352,7 @@ static void sparc_start_secondary(void *arg)
 	preempt_disable();
 	cpu = smp_processor_id();
 
-	/* Invoke the CPU_STARTING notifier callbacks */
 	notify_cpu_starting(cpu);
-
 	arch_cpu_pre_online(arg);
 
 	/* Set the CPU in the cpu_online_mask */
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 8a6151a..d3035ba 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1227,6 +1227,20 @@ void __init smp_setup_processor_id(void)
 		xcall_deliver_impl = hypervisor_xcall_deliver;
 }
 
+void __init smp_fill_in_cpu_possible_map(void)
+{
+	int possible_cpus = num_possible_cpus();
+	int i;
+
+	if (possible_cpus > nr_cpu_ids)
+		possible_cpus = nr_cpu_ids;
+
+	for (i = 0; i < possible_cpus; i++)
+		set_cpu_possible(i, true);
+	for (; i < NR_CPUS; i++)
+		set_cpu_possible(i, false);
+}
+
 void smp_fill_in_sib_core_maps(void)
 {
 	unsigned int i;
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index d21cd62..4094a51 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -8,7 +8,7 @@
  * I like traps on v9, :))))
  */
 
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/sched.h>
 #include <linux/linkage.h>
 #include <linux/kernel.h>
diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index 9aacb91..52c00d9 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <asm/asi.h>
 #include <asm/ptrace.h>
 #include <asm/pstate.h>
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index d79b3b7..572db68 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -49,6 +49,7 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index e16fdd2..643c149 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -14,7 +14,7 @@
 #include <linux/mman.h>
 #include <linux/signal.h>
 #include <linux/mm.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/init.h>
 #include <linux/perf_event.h>
 #include <linux/interrupt.h>
@@ -484,6 +484,7 @@ good_area:
 		tsb_grow(mm, MM_TSB_BASE, mm_rss);
 #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
 	mm_rss = mm->context.hugetlb_pte_count + mm->context.thp_pte_count;
+	mm_rss *= REAL_HPAGE_PER_HPAGE;
 	if (unlikely(mm_rss >
 		     mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) {
 		if (mm->context.tsb_block[MM_TSB_HUGE].tsb)
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 65457c9..439784b 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -5,7 +5,7 @@
  *  Copyright (C) 1997-1999 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  */
  
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/string.h>
@@ -1160,7 +1160,7 @@ int __node_distance(int from, int to)
 	return numa_latency[from][to];
 }
 
-static int find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp)
+static int __init find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp)
 {
 	int i;
 
@@ -1173,8 +1173,8 @@ static int find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp)
 	return i;
 }
 
-static void find_numa_latencies_for_group(struct mdesc_handle *md, u64 grp,
-					  int index)
+static void __init find_numa_latencies_for_group(struct mdesc_handle *md,
+						 u64 grp, int index)
 {
 	u64 arc;
 
@@ -2081,7 +2081,6 @@ void __init paging_init(void)
 {
 	unsigned long end_pfn, shift, phys_base;
 	unsigned long real_end, i;
-	int node;
 
 	setup_page_offset();
 
@@ -2250,21 +2249,6 @@ void __init paging_init(void)
 	/* Setup bootmem... */
 	last_valid_pfn = end_pfn = bootmem_init(phys_base);
 
-	/* Once the OF device tree and MDESC have been setup, we know
-	 * the list of possible cpus.  Therefore we can allocate the
-	 * IRQ stacks.
-	 */
-	for_each_possible_cpu(i) {
-		node = cpu_to_node(i);
-
-		softirq_stack[i] = __alloc_bootmem_node(NODE_DATA(node),
-							THREAD_SIZE,
-							THREAD_SIZE, 0);
-		hardirq_stack[i] = __alloc_bootmem_node(NODE_DATA(node),
-							THREAD_SIZE,
-							THREAD_SIZE, 0);
-	}
-
 	kernel_physical_mapping_init();
 
 	{
diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c
index 3659d37..c56a195 100644
--- a/arch/sparc/mm/tlb.c
+++ b/arch/sparc/mm/tlb.c
@@ -174,10 +174,25 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		return;
 
 	if ((pmd_val(pmd) ^ pmd_val(orig)) & _PAGE_PMD_HUGE) {
-		if (pmd_val(pmd) & _PAGE_PMD_HUGE)
-			mm->context.thp_pte_count++;
-		else
-			mm->context.thp_pte_count--;
+		/*
+		 * Note that this routine only sets pmds for THP pages.
+		 * Hugetlb pages are handled elsewhere.  We need to check
+		 * for huge zero page.  Huge zero pages are like hugetlb
+		 * pages in that there is no RSS, but there is the need
+		 * for TSB entries.  So, huge zero page counts go into
+		 * hugetlb_pte_count.
+		 */
+		if (pmd_val(pmd) & _PAGE_PMD_HUGE) {
+			if (is_huge_zero_page(pmd_page(pmd)))
+				mm->context.hugetlb_pte_count++;
+			else
+				mm->context.thp_pte_count++;
+		} else {
+			if (is_huge_zero_page(pmd_page(orig)))
+				mm->context.hugetlb_pte_count--;
+			else
+				mm->context.thp_pte_count--;
+		}
 
 		/* Do not try to allocate the TSB hash table if we
 		 * don't have one already.  We have various locks held
@@ -204,6 +219,9 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 	}
 }
 
+/*
+ * This routine is only called when splitting a THP
+ */
 void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 		     pmd_t *pmdp)
 {
@@ -213,6 +231,15 @@ void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 
 	set_pmd_at(vma->vm_mm, address, pmdp, entry);
 	flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
+
+	/*
+	 * set_pmd_at() will not be called in a way to decrement
+	 * thp_pte_count when splitting a THP, so do it now.
+	 * Sanity check pmd before doing the actual decrement.
+	 */
+	if ((pmd_val(entry) & _PAGE_PMD_HUGE) &&
+	    !is_huge_zero_page(pmd_page(entry)))
+		(vma->vm_mm)->context.thp_pte_count--;
 }
 
 void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 6725ed4..f2b7711 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -469,8 +469,10 @@ retry_tsb_alloc:
 
 int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
+	unsigned long mm_rss = get_mm_rss(mm);
 #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
-	unsigned long total_huge_pte_count;
+	unsigned long saved_hugetlb_pte_count;
+	unsigned long saved_thp_pte_count;
 #endif
 	unsigned int i;
 
@@ -483,10 +485,12 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	 * will re-increment the counters as the parent PTEs are
 	 * copied into the child address space.
 	 */
-	total_huge_pte_count = mm->context.hugetlb_pte_count +
-			 mm->context.thp_pte_count;
+	saved_hugetlb_pte_count = mm->context.hugetlb_pte_count;
+	saved_thp_pte_count = mm->context.thp_pte_count;
 	mm->context.hugetlb_pte_count = 0;
 	mm->context.thp_pte_count = 0;
+
+	mm_rss -= saved_thp_pte_count * (HPAGE_SIZE / PAGE_SIZE);
 #endif
 
 	/* copy_mm() copies over the parent's mm_struct before calling
@@ -499,11 +503,13 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	/* If this is fork, inherit the parent's TSB size.  We would
 	 * grow it to that size on the first page fault anyways.
 	 */
-	tsb_grow(mm, MM_TSB_BASE, get_mm_rss(mm));
+	tsb_grow(mm, MM_TSB_BASE, mm_rss);
 
 #if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
-	if (unlikely(total_huge_pte_count))
-		tsb_grow(mm, MM_TSB_HUGE, total_huge_pte_count);
+	if (unlikely(saved_hugetlb_pte_count + saved_thp_pte_count))
+		tsb_grow(mm, MM_TSB_HUGE,
+			 (saved_hugetlb_pte_count + saved_thp_pte_count) *
+			 REAL_HPAGE_PER_HPAGE);
 #endif
 
 	if (unlikely(!mm->context.tsb_block[MM_TSB_BASE].tsb))
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index ad143c1..6d8dc2a 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -16,9 +16,8 @@ static struct linux_prom_ranges promlib_obio_ranges[PROMREG_MAX];
 static int num_obio_ranges;
 
 /* Adjust register values based upon the ranges parameters. */
-static void
-prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
-		 struct linux_prom_ranges *rangep, int nranges)
+static void prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
+			     struct linux_prom_ranges *rangep, int nranges)
 {
 	int regc, rngc;
 
@@ -34,33 +33,30 @@ prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
 	}
 }
 
-static void
-prom_adjust_ranges(struct linux_prom_ranges *ranges1, int nranges1,
-		   struct linux_prom_ranges *ranges2, int nranges2)
+static void prom_adjust_ranges(struct linux_prom_ranges *ranges1, int nranges1,
+			       struct linux_prom_ranges *ranges2, int nranges2)
 {
 	int rng1c, rng2c;
 
-	for(rng1c=0; rng1c < nranges1; rng1c++) {
-		for(rng2c=0; rng2c < nranges2; rng2c++)
-			if(ranges1[rng1c].ot_parent_space == ranges2[rng2c].ot_child_space &&
+	for (rng1c = 0; rng1c < nranges1; rng1c++) {
+		for (rng2c = 0; rng2c < nranges2; rng2c++)
+			if (ranges1[rng1c].ot_parent_space == ranges2[rng2c].ot_child_space &&
 			   ranges1[rng1c].ot_parent_base >= ranges2[rng2c].ot_child_base &&
 			   ranges2[rng2c].ot_child_base + ranges2[rng2c].or_size - ranges1[rng1c].ot_parent_base > 0U)
 			break;
-		if(rng2c == nranges2) /* oops */
+		if (rng2c == nranges2) /* oops */
 			prom_printf("adjust_ranges: Could not find matching bus type...\n");
 		else if (ranges1[rng1c].ot_parent_base + ranges1[rng1c].or_size > ranges2[rng2c].ot_child_base + ranges2[rng2c].or_size)
-			ranges1[rng1c].or_size =
-				ranges2[rng2c].ot_child_base + ranges2[rng2c].or_size - ranges1[rng1c].ot_parent_base;
+			ranges1[rng1c].or_size = ranges2[rng2c].ot_child_base + ranges2[rng2c].or_size - ranges1[rng1c].ot_parent_base;
 		ranges1[rng1c].ot_parent_space = ranges2[rng2c].ot_parent_space;
 		ranges1[rng1c].ot_parent_base += ranges2[rng2c].ot_parent_base;
 	}
 }
 
 /* Apply probed obio ranges to registers passed, if no ranges return. */
-void
-prom_apply_obio_ranges(struct linux_prom_registers *regs, int nregs)
+void prom_apply_obio_ranges(struct linux_prom_registers *regs, int nregs)
 {
-	if(num_obio_ranges)
+	if (num_obio_ranges)
 		prom_adjust_regs(regs, nregs, promlib_obio_ranges, num_obio_ranges);
 }
 EXPORT_SYMBOL(prom_apply_obio_ranges);
@@ -76,40 +72,40 @@ void __init prom_ranges_init(void)
 	node = prom_getchild(prom_root_node);
 	obio_node = prom_searchsiblings(node, "obio");
 
-	if(obio_node) {
+	if (obio_node) {
 		success = prom_getproperty(obio_node, "ranges",
 					   (char *) promlib_obio_ranges,
 					   sizeof(promlib_obio_ranges));
-		if(success != -1)
-			num_obio_ranges = (success/sizeof(struct linux_prom_ranges));
+		if (success != -1)
+			num_obio_ranges = (success / sizeof(struct linux_prom_ranges));
 	}
 
-	if(num_obio_ranges)
+	if (num_obio_ranges)
 		prom_printf("PROMLIB: obio_ranges %d\n", num_obio_ranges);
 }
 
 void prom_apply_generic_ranges(phandle node, phandle parent,
-		struct linux_prom_registers *regs, int nregs)
+			       struct linux_prom_registers *regs, int nregs)
 {
 	int success;
 	int num_ranges;
 	struct linux_prom_ranges ranges[PROMREG_MAX];
-	
+
 	success = prom_getproperty(node, "ranges",
 				   (char *) ranges,
-				   sizeof (ranges));
+				   sizeof(ranges));
 	if (success != -1) {
-		num_ranges = (success/sizeof(struct linux_prom_ranges));
+		num_ranges = (success / sizeof(struct linux_prom_ranges));
 		if (parent) {
 			struct linux_prom_ranges parent_ranges[PROMREG_MAX];
 			int num_parent_ranges;
-		
+
 			success = prom_getproperty(parent, "ranges",
-				   		   (char *) parent_ranges,
-				   		   sizeof (parent_ranges));
+						   (char *) parent_ranges,
+						   sizeof(parent_ranges));
 			if (success != -1) {
-				num_parent_ranges = (success/sizeof(struct linux_prom_ranges));
-				prom_adjust_ranges (ranges, num_ranges, parent_ranges, num_parent_ranges);
+				num_parent_ranges = (success / sizeof(struct linux_prom_ranges));
+				prom_adjust_ranges(ranges, num_ranges, parent_ranges, num_parent_ranges);
 			}
 		}
 		prom_adjust_regs(regs, nregs, ranges, num_ranges);
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 78da75b..4583c03 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -3,7 +3,6 @@
 
 config TILE
 	def_bool y
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_WANT_FRAME_POINTERS
diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h
index 84a9240..1fa1f25 100644
--- a/arch/tile/include/asm/irq.h
+++ b/arch/tile/include/asm/irq.h
@@ -79,8 +79,9 @@ void tile_irq_activate(unsigned int irq, int tile_irq_type);
 void setup_irq_regs(void);
 
 #ifdef __tilegx__
-void arch_trigger_all_cpu_backtrace(bool self);
-#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
+void arch_trigger_cpumask_backtrace(const struct cpumask *mask,
+				    bool exclude_self);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 #endif
 
 #endif /* _ASM_TILE_IRQ_H */
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
index 670a356..101de132 100644
--- a/arch/tile/kernel/entry.S
+++ b/arch/tile/kernel/entry.S
@@ -50,7 +50,7 @@ STD_ENTRY(smp_nap)
  * When interrupted at _cpu_idle_nap, we bump the PC forward 8, and
  * as a result return to the function that called _cpu_idle().
  */
-STD_ENTRY(_cpu_idle)
+STD_ENTRY_SECTION(_cpu_idle, .cpuidle.text)
 	movei r1, 1
 	IRQ_ENABLE_LOAD(r2, r3)
 	mtspr INTERRUPT_CRITICAL_SECTION, r1
diff --git a/arch/tile/kernel/ftrace.c b/arch/tile/kernel/ftrace.c
index 4a57208..b827a41 100644
--- a/arch/tile/kernel/ftrace.c
+++ b/arch/tile/kernel/ftrace.c
@@ -184,7 +184,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	*parent = return_hooker;
 
 	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer);
+				       frame_pointer, NULL);
 	if (err == -EBUSY) {
 		*parent = old;
 		return;
diff --git a/arch/tile/kernel/pmc.c b/arch/tile/kernel/pmc.c
index db62cc3..81cf874 100644
--- a/arch/tile/kernel/pmc.c
+++ b/arch/tile/kernel/pmc.c
@@ -16,7 +16,6 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 #include <linux/atomic.h>
-#include <linux/interrupt.h>
 
 #include <asm/processor.h>
 #include <asm/pmc.h>
@@ -29,9 +28,7 @@ int handle_perf_interrupt(struct pt_regs *regs, int fault)
 	if (!perf_irq)
 		panic("Unexpected PERF_COUNT interrupt %d\n", fault);
 
-	nmi_enter();
 	retval = perf_irq(regs, fault);
-	nmi_exit();
 	return retval;
 }
 
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index a465d83..9f37106 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -22,7 +22,7 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/compat.h>
-#include <linux/hardirq.h>
+#include <linux/nmi.h>
 #include <linux/syscalls.h>
 #include <linux/kernel.h>
 #include <linux/tracehook.h>
@@ -594,66 +594,18 @@ void show_regs(struct pt_regs *regs)
 	tile_show_stack(&kbt);
 }
 
-/* To ensure stack dump on tiles occurs one by one. */
-static DEFINE_SPINLOCK(backtrace_lock);
-/* To ensure no backtrace occurs before all of the stack dump are done. */
-static atomic_t backtrace_cpus;
-/* The cpu mask to avoid reentrance. */
-static struct cpumask backtrace_mask;
-
-void do_nmi_dump_stack(struct pt_regs *regs)
-{
-	int is_idle = is_idle_task(current) && !in_interrupt();
-	int cpu;
-
-	nmi_enter();
-	cpu = smp_processor_id();
-	if (WARN_ON_ONCE(!cpumask_test_and_clear_cpu(cpu, &backtrace_mask)))
-		goto done;
-
-	spin_lock(&backtrace_lock);
-	if (is_idle)
-		pr_info("CPU: %d idle\n", cpu);
-	else
-		show_regs(regs);
-	spin_unlock(&backtrace_lock);
-	atomic_dec(&backtrace_cpus);
-done:
-	nmi_exit();
-}
-
 #ifdef __tilegx__
-void arch_trigger_all_cpu_backtrace(bool self)
+void nmi_raise_cpu_backtrace(struct cpumask *in_mask)
 {
 	struct cpumask mask;
 	HV_Coord tile;
 	unsigned int timeout;
 	int cpu;
-	int ongoing;
 	HV_NMI_Info info[NR_CPUS];
 
-	ongoing = atomic_cmpxchg(&backtrace_cpus, 0, num_online_cpus() - 1);
-	if (ongoing != 0) {
-		pr_err("Trying to do all-cpu backtrace.\n");
-		pr_err("But another all-cpu backtrace is ongoing (%d cpus left)\n",
-		       ongoing);
-		if (self) {
-			pr_err("Reporting the stack on this cpu only.\n");
-			dump_stack();
-		}
-		return;
-	}
-
-	cpumask_copy(&mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), &mask);
-	cpumask_copy(&backtrace_mask, &mask);
-
-	/* Backtrace for myself first. */
-	if (self)
-		dump_stack();
-
 	/* Tentatively dump stack on remote tiles via NMI. */
 	timeout = 100;
+	cpumask_copy(&mask, in_mask);
 	while (!cpumask_empty(&mask) && timeout) {
 		for_each_cpu(cpu, &mask) {
 			tile.x = cpu_x(cpu);
@@ -664,12 +616,17 @@ void arch_trigger_all_cpu_backtrace(bool self)
 		}
 
 		mdelay(10);
+		touch_softlockup_watchdog();
 		timeout--;
 	}
 
-	/* Warn about cpus stuck in ICS and decrement their counts here. */
+	/* Warn about cpus stuck in ICS. */
 	if (!cpumask_empty(&mask)) {
 		for_each_cpu(cpu, &mask) {
+
+			/* Clear the bit as if nmi_cpu_backtrace() ran. */
+			cpumask_clear_cpu(cpu, in_mask);
+
 			switch (info[cpu].result) {
 			case HV_NMI_RESULT_FAIL_ICS:
 				pr_warn("Skipping stack dump of cpu %d in ICS at pc %#llx\n",
@@ -680,16 +637,20 @@ void arch_trigger_all_cpu_backtrace(bool self)
 					cpu);
 				break;
 			case HV_ENOSYS:
-				pr_warn("Hypervisor too old to allow remote stack dumps.\n");
-				goto skip_for_each;
+				WARN_ONCE(1, "Hypervisor too old to allow remote stack dumps.\n");
+				break;
 			default:  /* should not happen */
 				pr_warn("Skipping stack dump of cpu %d [%d,%#llx]\n",
 					cpu, info[cpu].result, info[cpu].pc);
 				break;
 			}
 		}
-skip_for_each:
-		atomic_sub(cpumask_weight(&mask), &backtrace_cpus);
 	}
 }
+
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
+{
+	nmi_trigger_cpumask_backtrace(mask, exclude_self,
+				      nmi_raise_cpu_backtrace);
+}
 #endif /* __tilegx_ */
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 4d9651c..39f427b 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -20,6 +20,8 @@
 #include <linux/reboot.h>
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/nmi.h>
 #include <asm/stack.h>
 #include <asm/traps.h>
 #include <asm/setup.h>
@@ -392,14 +394,17 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 
 void do_nmi(struct pt_regs *regs, int fault_num, unsigned long reason)
 {
+	nmi_enter();
 	switch (reason) {
+#ifdef arch_trigger_cpumask_backtrace
 	case TILE_NMI_DUMP_STACK:
-		do_nmi_dump_stack(regs);
+		nmi_cpu_backtrace(regs);
 		break;
+#endif
 	default:
 		panic("Unexpected do_nmi type %ld", reason);
-		return;
 	}
+	nmi_exit();
 }
 
 /* Deprecated function currently only used here. */
diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S
index 9d449ca..e1baf09 100644
--- a/arch/tile/kernel/vmlinux.lds.S
+++ b/arch/tile/kernel/vmlinux.lds.S
@@ -42,6 +42,7 @@ SECTIONS
   .text : AT (ADDR(.text) - LOAD_OFFSET) {
     HEAD_TEXT
     SCHED_TEXT
+    CPUIDLE_TEXT
     LOCK_TEXT
     KPROBES_TEXT
     IRQENTRY_TEXT
diff --git a/arch/tile/mm/mmap.c b/arch/tile/mm/mmap.c
index 851a94e..ef61c59 100644
--- a/arch/tile/mm/mmap.c
+++ b/arch/tile/mm/mmap.c
@@ -88,6 +88,5 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }
diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c
index 2d0266d..3282787 100644
--- a/arch/um/drivers/harddog_kern.c
+++ b/arch/um/drivers/harddog_kern.c
@@ -175,27 +175,4 @@ static struct miscdevice harddog_miscdev = {
 	.name		= "watchdog",
 	.fops		= &harddog_fops,
 };
-
-static char banner[] __initdata = KERN_INFO "UML Watchdog Timer\n";
-
-static int __init harddog_init(void)
-{
-	int ret;
-
-	ret = misc_register(&harddog_miscdev);
-
-	if (ret)
-		return ret;
-
-	printk(banner);
-
-	return 0;
-}
-
-static void __exit harddog_exit(void)
-{
-	misc_deregister(&harddog_miscdev);
-}
-
-module_init(harddog_init);
-module_exit(harddog_exit);
+module_misc_device(harddog_miscdev);
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index adde088..4fdbcf9 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -68,6 +68,7 @@ SECTIONS
     _stext = .;
     TEXT_TEXT
     SCHED_TEXT
+    CPUIDLE_TEXT
     LOCK_TEXT
     *(.fixup)
     *(.stub .text.* .gnu.linkonce.t.*)
diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c
index ef4b8f9..b783ac8 100644
--- a/arch/um/kernel/skas/syscall.c
+++ b/arch/um/kernel/skas/syscall.c
@@ -21,21 +21,17 @@ void handle_syscall(struct uml_pt_regs *r)
 	PT_REGS_SET_SYSCALL_RETURN(regs, -ENOSYS);
 
 	if (syscall_trace_enter(regs))
-		return;
+		goto out;
 
 	/* Do the seccomp check after ptrace; failures should be fast. */
 	if (secure_computing(NULL) == -1)
-		return;
+		goto out;
 
-	/* Update the syscall number after orig_ax has potentially been updated
-	 * with ptrace.
-	 */
-	UPT_SYSCALL_NR(r) = PT_SYSCALL_NR(r->gp);
 	syscall = UPT_SYSCALL_NR(r);
-
 	if (syscall >= 0 && syscall <= __NR_syscall_max)
 		PT_REGS_SET_SYSCALL_RETURN(regs,
 				EXECUTE_SYSCALL(syscall, regs));
 
+out:
 	syscall_trace_leave(regs);
 }
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 6899195..1840f55 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -28,6 +28,7 @@ SECTIONS
     _stext = .;
     TEXT_TEXT
     SCHED_TEXT
+    CPUIDLE_TEXT
     LOCK_TEXT
     *(.fixup)
     /* .gnu.warning sections are handled specially by elf32.em.  */
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index 00299c9..d7c6b67 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -295,8 +295,7 @@ unsigned long get_wchan(struct task_struct *p)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
 }
 
 /*
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
index 77e407e..56e788e 100644
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -37,6 +37,7 @@ SECTIONS
 	.text : {		/* Real text segment */
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 
 		*(.fixup)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2a1f0ce..bada636 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,11 +23,11 @@ config X86
 	select ARCH_CLOCKSOURCE_DATA
 	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FAST_MULTIPLIER
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_GIGANTIC_PAGE		if X86_64
 	select ARCH_HAS_KCOV			if X86_64
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_MMIO_FLUSH
@@ -93,6 +93,7 @@ config X86
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_WITHIN_STACK_FRAMES
 	select HAVE_EBPF_JIT			if X86_64
+	select HAVE_ARCH_VMAP_STACK		if X86_64
 	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
@@ -109,7 +110,6 @@ config X86
 	select HAVE_EXIT_THREAD
 	select HAVE_FENTRY			if X86_64
 	select HAVE_FTRACE_MCOUNT_RECORD
-	select HAVE_FUNCTION_GRAPH_FP_TEST
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_GCC_PLUGINS
@@ -157,6 +157,7 @@ config X86
 	select SPARSE_IRQ
 	select SRCU
 	select SYSCTL_EXCEPTION_TRACE
+	select THREAD_INFO_IN_TASK
 	select USER_STACKTRACE_SUPPORT
 	select VIRT_TO_BUS
 	select X86_DEV_DMA_OPS			if X86_64
@@ -549,6 +550,18 @@ config X86_INTEL_QUARK
 	  Say Y here if you have a Quark based system such as the Arduino
 	  compatible Intel Galileo.
 
+config MLX_PLATFORM
+	tristate "Mellanox Technologies platform support"
+	depends on X86_64
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  This option enables system support for the Mellanox Technologies
+	  platform.
+
+	  Say Y here if you are building a kernel for Mellanox system.
+
+	  Otherwise, say N.
+
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
 	depends on X86 && ACPI
@@ -705,7 +718,6 @@ config PARAVIRT_DEBUG
 config PARAVIRT_SPINLOCKS
 	bool "Paravirtualization layer for spinlocks"
 	depends on PARAVIRT && SMP
-	select UNINLINE_SPIN_UNLOCK if !QUEUED_SPINLOCKS
 	---help---
 	  Paravirtualized spinlocks allow a pvops backend to replace the
 	  spinlock implementation with something virtualization-friendly
@@ -718,7 +730,7 @@ config PARAVIRT_SPINLOCKS
 
 config QUEUED_LOCK_STAT
 	bool "Paravirt queued spinlock statistics"
-	depends on PARAVIRT_SPINLOCKS && DEBUG_FS && QUEUED_SPINLOCKS
+	depends on PARAVIRT_SPINLOCKS && DEBUG_FS
 	---help---
 	  Enable the collection of statistical data on the slowpath
 	  behavior of paravirtualized queued spinlocks and report
@@ -2745,19 +2757,6 @@ config PMC_ATOM
 	def_bool y
         depends on PCI
 
-config VMD
-	depends on PCI_MSI
-	tristate "Volume Management Device Driver"
-	default N
-	---help---
-	  Adds support for the Intel Volume Management Device (VMD). VMD is a
-	  secondary PCI host bridge that allows PCI Express root ports,
-	  and devices attached to them, to be removed from the default
-	  PCI domain and placed within the VMD domain. This provides
-	  more bus resources than are otherwise possible with a
-	  single domain. If you know your system provides one of these and
-	  has devices attached to it, say Y; if you are not sure, say N.
-
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 830ed39..2d44933 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -163,11 +163,12 @@ asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
 asinstr += $(call as-instr,crc32l %eax$(comma)%eax,-DCONFIG_AS_CRC32=1)
 avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
 avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
+avx512_instr :=$(call as-instr,vpmovm2b %k1$(comma)%zmm5,-DCONFIG_AS_AVX512=1)
 sha1_ni_instr :=$(call as-instr,sha1msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA1_NI=1)
 sha256_ni_instr :=$(call as-instr,sha256msg1 %xmm0$(comma)%xmm1,-DCONFIG_AS_SHA256_NI=1)
 
-KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(sha1_ni_instr) $(sha256_ni_instr)
-KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(sha1_ni_instr) $(sha256_ni_instr)
+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr)
+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr) $(avx2_instr) $(avx512_instr) $(sha1_ni_instr) $(sha256_ni_instr)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index ff574da..cc69e37 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -29,22 +29,11 @@ __pure const struct efi_config *__efi_early(void)
 static void setup_boot_services##bits(struct efi_config *c)		\
 {									\
 	efi_system_table_##bits##_t *table;				\
-	efi_boot_services_##bits##_t *bt;				\
 									\
 	table = (typeof(table))sys_table;				\
 									\
+	c->boot_services = table->boottime;				\
 	c->text_output = table->con_out;				\
-									\
-	bt = (typeof(bt))(unsigned long)(table->boottime);		\
-									\
-	c->allocate_pool = bt->allocate_pool;				\
-	c->allocate_pages = bt->allocate_pages;				\
-	c->get_memory_map = bt->get_memory_map;				\
-	c->free_pool = bt->free_pool;					\
-	c->free_pages = bt->free_pages;					\
-	c->locate_handle = bt->locate_handle;				\
-	c->handle_protocol = bt->handle_protocol;			\
-	c->exit_boot_services = bt->exit_boot_services;			\
 }
 BOOT_SERVICES(32);
 BOOT_SERVICES(64);
@@ -286,29 +275,6 @@ void efi_char16_printk(efi_system_table_t *table, efi_char16_t *str)
 	}
 }
 
-static void find_bits(unsigned long mask, u8 *pos, u8 *size)
-{
-	u8 first, len;
-
-	first = 0;
-	len = 0;
-
-	if (mask) {
-		while (!(mask & 0x1)) {
-			mask = mask >> 1;
-			first++;
-		}
-
-		while (mask & 0x1) {
-			mask = mask >> 1;
-			len++;
-		}
-	}
-
-	*pos = first;
-	*size = len;
-}
-
 static efi_status_t
 __setup_efi_pci32(efi_pci_io_protocol_32 *pci, struct pci_setup_rom **__rom)
 {
@@ -578,7 +544,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
 	efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
 	unsigned long nr_ugas;
 	u32 *handles = (u32 *)uga_handle;;
-	efi_status_t status;
+	efi_status_t status = EFI_INVALID_PARAMETER;
 	int i;
 
 	first_uga = NULL;
@@ -623,7 +589,7 @@ setup_uga64(void **uga_handle, unsigned long size, u32 *width, u32 *height)
 	efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
 	unsigned long nr_ugas;
 	u64 *handles = (u64 *)uga_handle;;
-	efi_status_t status;
+	efi_status_t status = EFI_INVALID_PARAMETER;
 	int i;
 
 	first_uga = NULL;
@@ -1004,79 +970,87 @@ static efi_status_t alloc_e820ext(u32 nr_desc, struct setup_data **e820ext,
 	return status;
 }
 
-static efi_status_t exit_boot(struct boot_params *boot_params,
-			      void *handle, bool is64)
-{
-	struct efi_info *efi = &boot_params->efi_info;
-	unsigned long map_sz, key, desc_size;
-	efi_memory_desc_t *mem_map;
+struct exit_boot_struct {
+	struct boot_params *boot_params;
+	struct efi_info *efi;
 	struct setup_data *e820ext;
-	const char *signature;
 	__u32 e820ext_size;
-	__u32 nr_desc, prev_nr_desc;
-	efi_status_t status;
-	__u32 desc_version;
-	bool called_exit = false;
-	u8 nr_entries;
-	int i;
-
-	nr_desc = 0;
-	e820ext = NULL;
-	e820ext_size = 0;
-
-get_map:
-	status = efi_get_memory_map(sys_table, &mem_map, &map_sz, &desc_size,
-				    &desc_version, &key);
-
-	if (status != EFI_SUCCESS)
-		return status;
-
-	prev_nr_desc = nr_desc;
-	nr_desc = map_sz / desc_size;
-	if (nr_desc > prev_nr_desc &&
-	    nr_desc > ARRAY_SIZE(boot_params->e820_map)) {
-		u32 nr_e820ext = nr_desc - ARRAY_SIZE(boot_params->e820_map);
-
-		status = alloc_e820ext(nr_e820ext, &e820ext, &e820ext_size);
-		if (status != EFI_SUCCESS)
-			goto free_mem_map;
+	bool is64;
+};
 
-		efi_call_early(free_pool, mem_map);
-		goto get_map; /* Allocated memory, get map again */
+static efi_status_t exit_boot_func(efi_system_table_t *sys_table_arg,
+				   struct efi_boot_memmap *map,
+				   void *priv)
+{
+	static bool first = true;
+	const char *signature;
+	__u32 nr_desc;
+	efi_status_t status;
+	struct exit_boot_struct *p = priv;
+
+	if (first) {
+		nr_desc = *map->buff_size / *map->desc_size;
+		if (nr_desc > ARRAY_SIZE(p->boot_params->e820_map)) {
+			u32 nr_e820ext = nr_desc -
+					ARRAY_SIZE(p->boot_params->e820_map);
+
+			status = alloc_e820ext(nr_e820ext, &p->e820ext,
+					       &p->e820ext_size);
+			if (status != EFI_SUCCESS)
+				return status;
+		}
+		first = false;
 	}
 
-	signature = is64 ? EFI64_LOADER_SIGNATURE : EFI32_LOADER_SIGNATURE;
-	memcpy(&efi->efi_loader_signature, signature, sizeof(__u32));
+	signature = p->is64 ? EFI64_LOADER_SIGNATURE : EFI32_LOADER_SIGNATURE;
+	memcpy(&p->efi->efi_loader_signature, signature, sizeof(__u32));
 
-	efi->efi_systab = (unsigned long)sys_table;
-	efi->efi_memdesc_size = desc_size;
-	efi->efi_memdesc_version = desc_version;
-	efi->efi_memmap = (unsigned long)mem_map;
-	efi->efi_memmap_size = map_sz;
+	p->efi->efi_systab = (unsigned long)sys_table_arg;
+	p->efi->efi_memdesc_size = *map->desc_size;
+	p->efi->efi_memdesc_version = *map->desc_ver;
+	p->efi->efi_memmap = (unsigned long)*map->map;
+	p->efi->efi_memmap_size = *map->map_size;
 
 #ifdef CONFIG_X86_64
-	efi->efi_systab_hi = (unsigned long)sys_table >> 32;
-	efi->efi_memmap_hi = (unsigned long)mem_map >> 32;
+	p->efi->efi_systab_hi = (unsigned long)sys_table_arg >> 32;
+	p->efi->efi_memmap_hi = (unsigned long)*map->map >> 32;
 #endif
 
+	return EFI_SUCCESS;
+}
+
+static efi_status_t exit_boot(struct boot_params *boot_params,
+			      void *handle, bool is64)
+{
+	unsigned long map_sz, key, desc_size, buff_size;
+	efi_memory_desc_t *mem_map;
+	struct setup_data *e820ext;
+	__u32 e820ext_size;
+	efi_status_t status;
+	__u32 desc_version;
+	struct efi_boot_memmap map;
+	struct exit_boot_struct priv;
+
+	map.map =		&mem_map;
+	map.map_size =		&map_sz;
+	map.desc_size =		&desc_size;
+	map.desc_ver =		&desc_version;
+	map.key_ptr =		&key;
+	map.buff_size =		&buff_size;
+	priv.boot_params =	boot_params;
+	priv.efi =		&boot_params->efi_info;
+	priv.e820ext =		NULL;
+	priv.e820ext_size =	0;
+	priv.is64 =		is64;
+
 	/* Might as well exit boot services now */
-	status = efi_call_early(exit_boot_services, handle, key);
-	if (status != EFI_SUCCESS) {
-		/*
-		 * ExitBootServices() will fail if any of the event
-		 * handlers change the memory map. In which case, we
-		 * must be prepared to retry, but only once so that
-		 * we're guaranteed to exit on repeated failures instead
-		 * of spinning forever.
-		 */
-		if (called_exit)
-			goto free_mem_map;
-
-		called_exit = true;
-		efi_call_early(free_pool, mem_map);
-		goto get_map;
-	}
+	status = efi_exit_boot_services(sys_table, handle, &map, &priv,
+					exit_boot_func);
+	if (status != EFI_SUCCESS)
+		return status;
 
+	e820ext = priv.e820ext;
+	e820ext_size = priv.e820ext_size;
 	/* Historic? */
 	boot_params->alt_mem_k = 32 * 1024;
 
@@ -1085,10 +1059,6 @@ get_map:
 		return status;
 
 	return EFI_SUCCESS;
-
-free_mem_map:
-	efi_call_early(free_pool, mem_map);
-	return status;
 }
 
 /*
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 1038524..fd0b6a2 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -82,7 +82,7 @@ ENTRY(efi_pe_entry)
 
 	/* Relocate efi_config->call() */
 	leal	efi32_config(%esi), %eax
-	add	%esi, 88(%eax)
+	add	%esi, 32(%eax)
 	pushl	%eax
 
 	call	make_boot_params
@@ -108,7 +108,7 @@ ENTRY(efi32_stub_entry)
 
 	/* Relocate efi_config->call() */
 	leal	efi32_config(%esi), %eax
-	add	%esi, 88(%eax)
+	add	%esi, 32(%eax)
 	pushl	%eax
 2:
 	call	efi_main
@@ -264,7 +264,7 @@ relocated:
 #ifdef CONFIG_EFI_STUB
 	.data
 efi32_config:
-	.fill 11,8,0
+	.fill 4,8,0
 	.long efi_call_phys
 	.long 0
 	.byte 0
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 0d80a7a..efdfba2 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -265,7 +265,7 @@ ENTRY(efi_pe_entry)
 	/*
 	 * Relocate efi_config->call().
 	 */
-	addq	%rbp, efi64_config+88(%rip)
+	addq	%rbp, efi64_config+32(%rip)
 
 	movq	%rax, %rdi
 	call	make_boot_params
@@ -285,7 +285,7 @@ handover_entry:
 	 * Relocate efi_config->call().
 	 */
 	movq	efi_config(%rip), %rax
-	addq	%rbp, 88(%rax)
+	addq	%rbp, 32(%rax)
 2:
 	movq	efi_config(%rip), %rdi
 	call	efi_main
@@ -457,14 +457,14 @@ efi_config:
 #ifdef CONFIG_EFI_MIXED
 	.global efi32_config
 efi32_config:
-	.fill	11,8,0
+	.fill	4,8,0
 	.quad	efi64_thunk
 	.byte	0
 #endif
 
 	.global efi64_config
 efi64_config:
-	.fill	11,8,0
+	.fill	4,8,0
 	.quad	efi_call
 	.byte	1
 #endif /* CONFIG_EFI_STUB */
diff --git a/arch/x86/configs/kvm_guest.config b/arch/x86/configs/kvm_guest.config
deleted file mode 100644
index 9906505..0000000
--- a/arch/x86/configs/kvm_guest.config
+++ /dev/null
@@ -1,31 +0,0 @@
-CONFIG_NET=y
-CONFIG_NET_CORE=y
-CONFIG_NETDEVICES=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV=y
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_INET=y
-CONFIG_TTY=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_KVM_GUEST=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_NET=y
-CONFIG_9P_FS=y
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_VIRTIO_INPUT=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index d28bdab..7ef4a09 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -255,7 +255,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_DMADEVICES=y
 CONFIG_EEEPC_LAPTOP=y
 CONFIG_AMD_IOMMU=y
-CONFIG_AMD_IOMMU_STATS=y
 CONFIG_INTEL_IOMMU=y
 # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
 CONFIG_EFI_VARS=y
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index 1433f6b..bdd9cc5 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -31,13 +31,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
 
-static struct thread_info *pt_regs_to_thread_info(struct pt_regs *regs)
-{
-	unsigned long top_of_stack =
-		(unsigned long)(regs + 1) + TOP_OF_KERNEL_STACK_PADDING;
-	return (struct thread_info *)(top_of_stack - THREAD_SIZE);
-}
-
 #ifdef CONFIG_CONTEXT_TRACKING
 /* Called on entry from user mode with IRQs off. */
 __visible inline void enter_from_user_mode(void)
@@ -71,7 +64,7 @@ static long syscall_trace_enter(struct pt_regs *regs)
 {
 	u32 arch = in_ia32_syscall() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64;
 
-	struct thread_info *ti = pt_regs_to_thread_info(regs);
+	struct thread_info *ti = current_thread_info();
 	unsigned long ret = 0;
 	bool emulated = false;
 	u32 work;
@@ -173,18 +166,17 @@ static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags)
 		/* Disable IRQs and retry */
 		local_irq_disable();
 
-		cached_flags = READ_ONCE(pt_regs_to_thread_info(regs)->flags);
+		cached_flags = READ_ONCE(current_thread_info()->flags);
 
 		if (!(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
 			break;
-
 	}
 }
 
 /* Called with IRQs disabled. */
 __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 {
-	struct thread_info *ti = pt_regs_to_thread_info(regs);
+	struct thread_info *ti = current_thread_info();
 	u32 cached_flags;
 
 	if (IS_ENABLED(CONFIG_PROVE_LOCKING) && WARN_ON(!irqs_disabled()))
@@ -209,7 +201,7 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 	 * special case only applies after poking regs and before the
 	 * very next return to user mode.
 	 */
-	ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED);
+	current->thread.status &= ~(TS_COMPAT|TS_I386_REGS_POKED);
 #endif
 
 	user_enter_irqoff();
@@ -247,7 +239,7 @@ static void syscall_slow_exit_work(struct pt_regs *regs, u32 cached_flags)
  */
 __visible inline void syscall_return_slowpath(struct pt_regs *regs)
 {
-	struct thread_info *ti = pt_regs_to_thread_info(regs);
+	struct thread_info *ti = current_thread_info();
 	u32 cached_flags = READ_ONCE(ti->flags);
 
 	CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
@@ -270,7 +262,7 @@ __visible inline void syscall_return_slowpath(struct pt_regs *regs)
 #ifdef CONFIG_X86_64
 __visible void do_syscall_64(struct pt_regs *regs)
 {
-	struct thread_info *ti = pt_regs_to_thread_info(regs);
+	struct thread_info *ti = current_thread_info();
 	unsigned long nr = regs->orig_ax;
 
 	enter_from_user_mode();
@@ -303,11 +295,11 @@ __visible void do_syscall_64(struct pt_regs *regs)
  */
 static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
 {
-	struct thread_info *ti = pt_regs_to_thread_info(regs);
+	struct thread_info *ti = current_thread_info();
 	unsigned int nr = (unsigned int)regs->orig_ax;
 
 #ifdef CONFIG_IA32_EMULATION
-	ti->status |= TS_COMPAT;
+	current->thread.status |= TS_COMPAT;
 #endif
 
 	if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY) {
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 0b56666..b75a8bc 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -204,34 +204,70 @@
 	POP_GS_EX
 .endm
 
+/*
+ * %eax: prev task
+ * %edx: next task
+ */
+ENTRY(__switch_to_asm)
+	/*
+	 * Save callee-saved registers
+	 * This must match the order in struct inactive_task_frame
+	 */
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+
+	/* switch stack */
+	movl	%esp, TASK_threadsp(%eax)
+	movl	TASK_threadsp(%edx), %esp
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+	movl	TASK_stack_canary(%edx), %ebx
+	movl	%ebx, PER_CPU_VAR(stack_canary)+stack_canary_offset
+#endif
+
+	/* restore callee-saved registers */
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
+
+	jmp	__switch_to
+END(__switch_to_asm)
+
+/*
+ * A newly forked process directly context switches into this address.
+ *
+ * eax: prev task we switched from
+ * ebx: kernel thread func (NULL for user thread)
+ * edi: kernel thread arg
+ */
 ENTRY(ret_from_fork)
 	pushl	%eax
 	call	schedule_tail
 	popl	%eax
 
+	testl	%ebx, %ebx
+	jnz	1f		/* kernel threads are uncommon */
+
+2:
 	/* When we fork, we trace the syscall return in the child, too. */
 	movl    %esp, %eax
 	call    syscall_return_slowpath
 	jmp     restore_all
-END(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
-	pushl	%eax
-	call	schedule_tail
-	popl	%eax
-	movl	PT_EBP(%esp), %eax
-	call	*PT_EBX(%esp)
-	movl	$0, PT_EAX(%esp)
 
+	/* kernel thread */
+1:	movl	%edi, %eax
+	call	*%ebx
 	/*
-	 * Kernel threads return to userspace as if returning from a syscall.
-	 * We should check whether anything actually uses this path and, if so,
-	 * consider switching it over to ret_from_fork.
+	 * A kernel thread is allowed to return here after successfully
+	 * calling do_execve().  Exit to userspace to complete the execve()
+	 * syscall.
 	 */
-	movl    %esp, %eax
-	call    syscall_return_slowpath
-	jmp     restore_all
-ENDPROC(ret_from_kernel_thread)
+	movl	$0, PT_EAX(%esp)
+	jmp	2b
+END(ret_from_fork)
 
 /*
  * Return to user mode is not as complex as all this looks,
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index d172c61..c98ec2ef 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -179,7 +179,8 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
 	 * If we need to do entry work or if we guess we'll need to do
 	 * exit work, go straight to the slow path.
 	 */
-	testl	$_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	movq	PER_CPU_VAR(current_task), %r11
+	testl	$_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
 	jnz	entry_SYSCALL64_slow_path
 
 entry_SYSCALL_64_fastpath:
@@ -217,7 +218,8 @@ entry_SYSCALL_64_fastpath:
 	 */
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	movq	PER_CPU_VAR(current_task), %r11
+	testl	$_TIF_ALLWORK_MASK, TASK_TI_flags(%r11)
 	jnz	1f
 
 	LOCKDEP_SYS_EXIT
@@ -351,8 +353,7 @@ ENTRY(stub_ptregs_64)
 	jmp	entry_SYSCALL64_slow_path
 
 1:
-	/* Called from C */
-	jmp	*%rax				/* called from C */
+	jmp	*%rax				/* Called from C */
 END(stub_ptregs_64)
 
 .macro ptregs_stub func
@@ -369,41 +370,73 @@ END(ptregs_\func)
 #include <asm/syscalls_64.h>
 
 /*
+ * %rdi: prev task
+ * %rsi: next task
+ */
+ENTRY(__switch_to_asm)
+	/*
+	 * Save callee-saved registers
+	 * This must match the order in inactive_task_frame
+	 */
+	pushq	%rbp
+	pushq	%rbx
+	pushq	%r12
+	pushq	%r13
+	pushq	%r14
+	pushq	%r15
+
+	/* switch stack */
+	movq	%rsp, TASK_threadsp(%rdi)
+	movq	TASK_threadsp(%rsi), %rsp
+
+#ifdef CONFIG_CC_STACKPROTECTOR
+	movq	TASK_stack_canary(%rsi), %rbx
+	movq	%rbx, PER_CPU_VAR(irq_stack_union)+stack_canary_offset
+#endif
+
+	/* restore callee-saved registers */
+	popq	%r15
+	popq	%r14
+	popq	%r13
+	popq	%r12
+	popq	%rbx
+	popq	%rbp
+
+	jmp	__switch_to
+END(__switch_to_asm)
+
+/*
  * A newly forked process directly context switches into this address.
  *
- * rdi: prev task we switched from
+ * rax: prev task we switched from
+ * rbx: kernel thread func (NULL for user thread)
+ * r12: kernel thread arg
  */
 ENTRY(ret_from_fork)
-	LOCK ; btr $TIF_FORK, TI_flags(%r8)
-
+	movq	%rax, %rdi
 	call	schedule_tail			/* rdi: 'prev' task parameter */
 
-	testb	$3, CS(%rsp)			/* from kernel_thread? */
-	jnz	1f
-
-	/*
-	 * We came from kernel_thread.  This code path is quite twisted, and
-	 * someone should clean it up.
-	 *
-	 * copy_thread_tls stashes the function pointer in RBX and the
-	 * parameter to be passed in RBP.  The called function is permitted
-	 * to call do_execve and thereby jump to user mode.
-	 */
-	movq	RBP(%rsp), %rdi
-	call	*RBX(%rsp)
-	movl	$0, RAX(%rsp)
+	testq	%rbx, %rbx			/* from kernel_thread? */
+	jnz	1f				/* kernel threads are uncommon */
 
-	/*
-	 * Fall through as though we're exiting a syscall.  This makes a
-	 * twisted sort of sense if we just called do_execve.
-	 */
-
-1:
+2:
 	movq	%rsp, %rdi
 	call	syscall_return_slowpath	/* returns with IRQs disabled */
 	TRACE_IRQS_ON			/* user mode is traced as IRQS on */
 	SWAPGS
 	jmp	restore_regs_and_iret
+
+1:
+	/* kernel thread */
+	movq	%r12, %rdi
+	call	*%rbx
+	/*
+	 * A kernel thread is allowed to return here after successfully
+	 * calling do_execve().  Exit to userspace to complete the execve()
+	 * syscall.
+	 */
+	movq	$0, RAX(%rsp)
+	jmp	2b
 END(ret_from_fork)
 
 /*
@@ -555,27 +588,69 @@ native_irq_return_iret:
 
 #ifdef CONFIG_X86_ESPFIX64
 native_irq_return_ldt:
-	pushq	%rax
-	pushq	%rdi
+	/*
+	 * We are running with user GSBASE.  All GPRs contain their user
+	 * values.  We have a percpu ESPFIX stack that is eight slots
+	 * long (see ESPFIX_STACK_SIZE).  espfix_waddr points to the bottom
+	 * of the ESPFIX stack.
+	 *
+	 * We clobber RAX and RDI in this code.  We stash RDI on the
+	 * normal stack and RAX on the ESPFIX stack.
+	 *
+	 * The ESPFIX stack layout we set up looks like this:
+	 *
+	 * --- top of ESPFIX stack ---
+	 * SS
+	 * RSP
+	 * RFLAGS
+	 * CS
+	 * RIP  <-- RSP points here when we're done
+	 * RAX  <-- espfix_waddr points here
+	 * --- bottom of ESPFIX stack ---
+	 */
+
+	pushq	%rdi				/* Stash user RDI */
 	SWAPGS
 	movq	PER_CPU_VAR(espfix_waddr), %rdi
-	movq	%rax, (0*8)(%rdi)		/* RAX */
-	movq	(2*8)(%rsp), %rax		/* RIP */
+	movq	%rax, (0*8)(%rdi)		/* user RAX */
+	movq	(1*8)(%rsp), %rax		/* user RIP */
 	movq	%rax, (1*8)(%rdi)
-	movq	(3*8)(%rsp), %rax		/* CS */
+	movq	(2*8)(%rsp), %rax		/* user CS */
 	movq	%rax, (2*8)(%rdi)
-	movq	(4*8)(%rsp), %rax		/* RFLAGS */
+	movq	(3*8)(%rsp), %rax		/* user RFLAGS */
 	movq	%rax, (3*8)(%rdi)
-	movq	(6*8)(%rsp), %rax		/* SS */
+	movq	(5*8)(%rsp), %rax		/* user SS */
 	movq	%rax, (5*8)(%rdi)
-	movq	(5*8)(%rsp), %rax		/* RSP */
+	movq	(4*8)(%rsp), %rax		/* user RSP */
 	movq	%rax, (4*8)(%rdi)
-	andl	$0xffff0000, %eax
-	popq	%rdi
+	/* Now RAX == RSP. */
+
+	andl	$0xffff0000, %eax		/* RAX = (RSP & 0xffff0000) */
+	popq	%rdi				/* Restore user RDI */
+
+	/*
+	 * espfix_stack[31:16] == 0.  The page tables are set up such that
+	 * (espfix_stack | (X & 0xffff0000)) points to a read-only alias of
+	 * espfix_waddr for any X.  That is, there are 65536 RO aliases of
+	 * the same page.  Set up RSP so that RSP[31:16] contains the
+	 * respective 16 bits of the /userspace/ RSP and RSP nonetheless
+	 * still points to an RO alias of the ESPFIX stack.
+	 */
 	orq	PER_CPU_VAR(espfix_stack), %rax
 	SWAPGS
 	movq	%rax, %rsp
-	popq	%rax
+
+	/*
+	 * At this point, we cannot write to the stack any more, but we can
+	 * still read.
+	 */
+	popq	%rax				/* Restore user RAX */
+
+	/*
+	 * RSP now points to an ordinary IRET frame, except that the page
+	 * is read-only and RSP[31:16] are preloaded with the userspace
+	 * values.  We can now IRET back to userspace.
+	 */
 	jmp	native_irq_return_iret
 #endif
 END(common_interrupt)
@@ -1002,7 +1077,6 @@ ENTRY(error_entry)
 	testb	$3, CS+8(%rsp)
 	jz	.Lerror_kernelspace
 
-.Lerror_entry_from_usermode_swapgs:
 	/*
 	 * We entered from user mode or we're pretending to have entered
 	 * from user mode due to an IRET fault.
@@ -1045,7 +1119,8 @@ ENTRY(error_entry)
 	 * gsbase and proceed.  We'll fix up the exception and land in
 	 * .Lgs_change's error handler with kernel gsbase.
 	 */
-	jmp	.Lerror_entry_from_usermode_swapgs
+	SWAPGS
+	jmp .Lerror_entry_done
 
 .Lbstep_iret:
 	/* Fix truncated RIP */
@@ -1073,7 +1148,7 @@ END(error_entry)
 
 
 /*
- * On entry, EBS is a "return to kernel mode" flag:
+ * On entry, EBX is a "return to kernel mode" flag:
  *   1: already in kernel mode, don't need SWAPGS
  *   0: user gsbase is loaded, we need SWAPGS and standard preparation for return to usermode
  */
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index f848572..ff6ef7b 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -386,3 +386,8 @@
 377	i386	copy_file_range		sys_copy_file_range
 378	i386	preadv2			sys_preadv2			compat_sys_preadv2
 379	i386	pwritev2		sys_pwritev2			compat_sys_pwritev2
+380	i386	pkey_mprotect		sys_pkey_mprotect
+381	i386	pkey_alloc		sys_pkey_alloc
+382	i386	pkey_free		sys_pkey_free
+#383	i386	pkey_get		sys_pkey_get
+#384	i386	pkey_set		sys_pkey_set
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index e9ce9c7..2f024d0 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -335,6 +335,11 @@
 326	common	copy_file_range		sys_copy_file_range
 327	64	preadv2			sys_preadv2
 328	64	pwritev2		sys_pwritev2
+329	common	pkey_mprotect		sys_pkey_mprotect
+330	common	pkey_alloc		sys_pkey_alloc
+331	common	pkey_free		sys_pkey_free
+#332	common	pkey_get		sys_pkey_get
+#333	common	pkey_set		sys_pkey_set
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
diff --git a/arch/x86/entry/syscalls/syscalltbl.sh b/arch/x86/entry/syscalls/syscalltbl.sh
index cd3d301..751d1f9 100644
--- a/arch/x86/entry/syscalls/syscalltbl.sh
+++ b/arch/x86/entry/syscalls/syscalltbl.sh
@@ -10,8 +10,11 @@ syscall_macro() {
 
     # Entry can be either just a function name or "function/qualifier"
     real_entry="${entry%%/*}"
-    qualifier="${entry:${#real_entry}}"		# Strip the function name
-    qualifier="${qualifier:1}"			# Strip the slash, if any
+    if [ "$entry" = "$real_entry" ]; then
+        qualifier=
+    else
+        qualifier=${entry#*/}
+    fi
 
     echo "__SYSCALL_${abi}($nr, $real_entry, $qualifier)"
 }
@@ -22,7 +25,7 @@ emit() {
     entry="$3"
     compat="$4"
 
-    if [ "$abi" == "64" -a -n "$compat" ]; then
+    if [ "$abi" = "64" -a -n "$compat" ]; then
 	echo "a compat entry for a 64-bit syscall makes no sense" >&2
 	exit 1
     fi
@@ -45,17 +48,17 @@ emit() {
 grep '^[0-9]' "$in" | sort -n | (
     while read nr abi name entry compat; do
 	abi=`echo "$abi" | tr '[a-z]' '[A-Z]'`
-	if [ "$abi" == "COMMON" -o "$abi" == "64" ]; then
+	if [ "$abi" = "COMMON" -o "$abi" = "64" ]; then
 	    # COMMON is the same as 64, except that we don't expect X32
 	    # programs to use it.  Our expectation has nothing to do with
 	    # any generated code, so treat them the same.
 	    emit 64 "$nr" "$entry" "$compat"
-	elif [ "$abi" == "X32" ]; then
+	elif [ "$abi" = "X32" ]; then
 	    # X32 is equivalent to 64 on an X32-compatible kernel.
 	    echo "#ifdef CONFIG_X86_X32_ABI"
 	    emit 64 "$nr" "$entry" "$compat"
 	    echo "#endif"
-	elif [ "$abi" == "I386" ]; then
+	elif [ "$abi" = "I386" ]; then
 	    emit "$abi" "$nr" "$entry" "$compat"
 	else
 	    echo "Unknown abi $abi" >&2
diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c
index 94d54d0..02223cb 100644
--- a/arch/x86/entry/vdso/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vclock_gettime.c
@@ -129,7 +129,7 @@ static notrace cycle_t vread_pvclock(int *mode)
 			return 0;
 		}
 
-		ret = __pvclock_read_cycles(pvti);
+		ret = __pvclock_read_cycles(pvti, rdtsc_ordered());
 	} while (pvclock_read_retry(pvti, version));
 
 	/* refer to vread_tsc() comment for rationale */
diff --git a/arch/x86/entry/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
index 4f74119..3dab75f 100644
--- a/arch/x86/entry/vdso/vdso2c.h
+++ b/arch/x86/entry/vdso/vdso2c.h
@@ -22,7 +22,7 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
 
 	ELF(Phdr) *pt = (ELF(Phdr) *)(raw_addr + GET_LE(&hdr->e_phoff));
 
-	if (hdr->e_type != ET_DYN)
+	if (GET_LE(&hdr->e_type) != ET_DYN)
 		fail("input is not a shared object\n");
 
 	/* Walk the segment table. */
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index f840766..23c881c 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -37,54 +37,6 @@ void __init init_vdso_image(const struct vdso_image *image)
 
 struct linux_binprm;
 
-/*
- * Put the vdso above the (randomized) stack with another randomized
- * offset.  This way there is no hole in the middle of address space.
- * To save memory make sure it is still in the same PTE as the stack
- * top.  This doesn't give that many random bits.
- *
- * Note that this algorithm is imperfect: the distribution of the vdso
- * start address within a PMD is biased toward the end.
- *
- * Only used for the 64-bit and x32 vdsos.
- */
-static unsigned long vdso_addr(unsigned long start, unsigned len)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	unsigned long addr, end;
-	unsigned offset;
-
-	/*
-	 * Round up the start address.  It can start out unaligned as a result
-	 * of stack start randomization.
-	 */
-	start = PAGE_ALIGN(start);
-
-	/* Round the lowest possible end address up to a PMD boundary. */
-	end = (start + len + PMD_SIZE - 1) & PMD_MASK;
-	if (end >= TASK_SIZE_MAX)
-		end = TASK_SIZE_MAX;
-	end -= len;
-
-	if (end > start) {
-		offset = get_random_int() % (((end - start) >> PAGE_SHIFT) + 1);
-		addr = start + (offset << PAGE_SHIFT);
-	} else {
-		addr = start;
-	}
-
-	/*
-	 * Forcibly align the final address in case we have a hardware
-	 * issue that requires alignment for performance reasons.
-	 */
-	addr = align_vdso_addr(addr);
-
-	return addr;
-#endif
-}
-
 static int vdso_fault(const struct vm_special_mapping *sm,
 		      struct vm_area_struct *vma, struct vm_fault *vmf)
 {
@@ -176,30 +128,28 @@ static int vvar_fault(const struct vm_special_mapping *sm,
 	return VM_FAULT_SIGBUS;
 }
 
-static int map_vdso(const struct vdso_image *image, bool calculate_addr)
+static const struct vm_special_mapping vdso_mapping = {
+	.name = "[vdso]",
+	.fault = vdso_fault,
+	.mremap = vdso_mremap,
+};
+static const struct vm_special_mapping vvar_mapping = {
+	.name = "[vvar]",
+	.fault = vvar_fault,
+};
+
+/*
+ * Add vdso and vvar mappings to current process.
+ * @image          - blob to map
+ * @addr           - request a specific address (zero to map at free addr)
+ */
+static int map_vdso(const struct vdso_image *image, unsigned long addr)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	unsigned long addr, text_start;
+	unsigned long text_start;
 	int ret = 0;
 
-	static const struct vm_special_mapping vdso_mapping = {
-		.name = "[vdso]",
-		.fault = vdso_fault,
-		.mremap = vdso_mremap,
-	};
-	static const struct vm_special_mapping vvar_mapping = {
-		.name = "[vvar]",
-		.fault = vvar_fault,
-	};
-
-	if (calculate_addr) {
-		addr = vdso_addr(current->mm->start_stack,
-				 image->size - image->sym_vvar_start);
-	} else {
-		addr = 0;
-	}
-
 	if (down_write_killable(&mm->mmap_sem))
 		return -EINTR;
 
@@ -238,24 +188,104 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
 
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
-		goto up_fail;
+		do_munmap(mm, text_start, image->size);
 	}
 
 up_fail:
-	if (ret)
+	if (ret) {
 		current->mm->context.vdso = NULL;
+		current->mm->context.vdso_image = NULL;
+	}
 
 	up_write(&mm->mmap_sem);
 	return ret;
 }
 
+#ifdef CONFIG_X86_64
+/*
+ * Put the vdso above the (randomized) stack with another randomized
+ * offset.  This way there is no hole in the middle of address space.
+ * To save memory make sure it is still in the same PTE as the stack
+ * top.  This doesn't give that many random bits.
+ *
+ * Note that this algorithm is imperfect: the distribution of the vdso
+ * start address within a PMD is biased toward the end.
+ *
+ * Only used for the 64-bit and x32 vdsos.
+ */
+static unsigned long vdso_addr(unsigned long start, unsigned len)
+{
+	unsigned long addr, end;
+	unsigned offset;
+
+	/*
+	 * Round up the start address.  It can start out unaligned as a result
+	 * of stack start randomization.
+	 */
+	start = PAGE_ALIGN(start);
+
+	/* Round the lowest possible end address up to a PMD boundary. */
+	end = (start + len + PMD_SIZE - 1) & PMD_MASK;
+	if (end >= TASK_SIZE_MAX)
+		end = TASK_SIZE_MAX;
+	end -= len;
+
+	if (end > start) {
+		offset = get_random_int() % (((end - start) >> PAGE_SHIFT) + 1);
+		addr = start + (offset << PAGE_SHIFT);
+	} else {
+		addr = start;
+	}
+
+	/*
+	 * Forcibly align the final address in case we have a hardware
+	 * issue that requires alignment for performance reasons.
+	 */
+	addr = align_vdso_addr(addr);
+
+	return addr;
+}
+
+static int map_vdso_randomized(const struct vdso_image *image)
+{
+	unsigned long addr = vdso_addr(current->mm->start_stack, image->size-image->sym_vvar_start);
+
+	return map_vdso(image, addr);
+}
+#endif
+
+int map_vdso_once(const struct vdso_image *image, unsigned long addr)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+
+	down_write(&mm->mmap_sem);
+	/*
+	 * Check if we have already mapped vdso blob - fail to prevent
+	 * abusing from userspace install_speciall_mapping, which may
+	 * not do accounting and rlimit right.
+	 * We could search vma near context.vdso, but it's a slowpath,
+	 * so let's explicitely check all VMAs to be completely sure.
+	 */
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if (vma_is_special_mapping(vma, &vdso_mapping) ||
+				vma_is_special_mapping(vma, &vvar_mapping)) {
+			up_write(&mm->mmap_sem);
+			return -EEXIST;
+		}
+	}
+	up_write(&mm->mmap_sem);
+
+	return map_vdso(image, addr);
+}
+
 #if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
 static int load_vdso32(void)
 {
 	if (vdso32_enabled != 1)  /* Other values all mean "disabled" */
 		return 0;
 
-	return map_vdso(&vdso_image_32, false);
+	return map_vdso(&vdso_image_32, 0);
 }
 #endif
 
@@ -265,7 +295,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	if (!vdso64_enabled)
 		return 0;
 
-	return map_vdso(&vdso_image_64, true);
+	return map_vdso_randomized(&vdso_image_64);
 }
 
 #ifdef CONFIG_COMPAT
@@ -276,8 +306,7 @@ int compat_arch_setup_additional_pages(struct linux_binprm *bprm,
 	if (test_thread_flag(TIF_X32)) {
 		if (!vdso64_enabled)
 			return 0;
-
-		return map_vdso(&vdso_image_x32, true);
+		return map_vdso_randomized(&vdso_image_x32);
 	}
 #endif
 #ifdef CONFIG_IA32_EMULATION
diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index e07a22b..f5f4b3f 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -119,8 +119,8 @@ static const u64 amd_perfmon_event_map[PERF_COUNT_HW_MAX] =
 {
   [PERF_COUNT_HW_CPU_CYCLES]			= 0x0076,
   [PERF_COUNT_HW_INSTRUCTIONS]			= 0x00c0,
-  [PERF_COUNT_HW_CACHE_REFERENCES]		= 0x0080,
-  [PERF_COUNT_HW_CACHE_MISSES]			= 0x0081,
+  [PERF_COUNT_HW_CACHE_REFERENCES]		= 0x077d,
+  [PERF_COUNT_HW_CACHE_MISSES]			= 0x077e,
   [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]		= 0x00c2,
   [PERF_COUNT_HW_BRANCH_MISSES]			= 0x00c3,
   [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND]	= 0x00d0, /* "Decoder empty" event */
diff --git a/arch/x86/events/amd/uncore.c b/arch/x86/events/amd/uncore.c
index e6131d4..65577f0 100644
--- a/arch/x86/events/amd/uncore.c
+++ b/arch/x86/events/amd/uncore.c
@@ -29,6 +29,8 @@
 
 #define COUNTER_SHIFT		16
 
+static HLIST_HEAD(uncore_unused_list);
+
 struct amd_uncore {
 	int id;
 	int refcnt;
@@ -39,7 +41,7 @@ struct amd_uncore {
 	cpumask_t *active_mask;
 	struct pmu *pmu;
 	struct perf_event *events[MAX_COUNTERS];
-	struct amd_uncore *free_when_cpu_online;
+	struct hlist_node node;
 };
 
 static struct amd_uncore * __percpu *amd_uncore_nb;
@@ -306,6 +308,7 @@ static int amd_uncore_cpu_up_prepare(unsigned int cpu)
 		uncore_nb->msr_base = MSR_F15H_NB_PERF_CTL;
 		uncore_nb->active_mask = &amd_nb_active_mask;
 		uncore_nb->pmu = &amd_nb_pmu;
+		uncore_nb->id = -1;
 		*per_cpu_ptr(amd_uncore_nb, cpu) = uncore_nb;
 	}
 
@@ -319,6 +322,7 @@ static int amd_uncore_cpu_up_prepare(unsigned int cpu)
 		uncore_l2->msr_base = MSR_F16H_L2I_PERF_CTL;
 		uncore_l2->active_mask = &amd_l2_active_mask;
 		uncore_l2->pmu = &amd_l2_pmu;
+		uncore_l2->id = -1;
 		*per_cpu_ptr(amd_uncore_l2, cpu) = uncore_l2;
 	}
 
@@ -348,7 +352,7 @@ amd_uncore_find_online_sibling(struct amd_uncore *this,
 			continue;
 
 		if (this->id == that->id) {
-			that->free_when_cpu_online = this;
+			hlist_add_head(&this->node, &uncore_unused_list);
 			this = that;
 			break;
 		}
@@ -388,13 +392,23 @@ static int amd_uncore_cpu_starting(unsigned int cpu)
 	return 0;
 }
 
+static void uncore_clean_online(void)
+{
+	struct amd_uncore *uncore;
+	struct hlist_node *n;
+
+	hlist_for_each_entry_safe(uncore, n, &uncore_unused_list, node) {
+		hlist_del(&uncore->node);
+		kfree(uncore);
+	}
+}
+
 static void uncore_online(unsigned int cpu,
 			  struct amd_uncore * __percpu *uncores)
 {
 	struct amd_uncore *uncore = *per_cpu_ptr(uncores, cpu);
 
-	kfree(uncore->free_when_cpu_online);
-	uncore->free_when_cpu_online = NULL;
+	uncore_clean_online();
 
 	if (cpu == uncore->cpu)
 		cpumask_set_cpu(cpu, uncore->active_mask);
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index d0efb5c..d31735f 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -37,6 +37,7 @@
 #include <asm/timer.h>
 #include <asm/desc.h>
 #include <asm/ldt.h>
+#include <asm/unwind.h>
 
 #include "perf_event.h"
 
@@ -1201,6 +1202,9 @@ static int x86_pmu_add(struct perf_event *event, int flags)
 	 * If group events scheduling transaction was started,
 	 * skip the schedulability test here, it will be performed
 	 * at commit time (->commit_txn) as a whole.
+	 *
+	 * If commit fails, we'll call ->del() on all events
+	 * for which ->add() was called.
 	 */
 	if (cpuc->txn_flags & PERF_PMU_TXN_ADD)
 		goto done_collect;
@@ -1223,6 +1227,14 @@ done_collect:
 	cpuc->n_added += n - n0;
 	cpuc->n_txn += n - n0;
 
+	if (x86_pmu.add) {
+		/*
+		 * This is before x86_pmu_enable() will call x86_pmu_start(),
+		 * so we enable LBRs before an event needs them etc..
+		 */
+		x86_pmu.add(event);
+	}
+
 	ret = 0;
 out:
 	return ret;
@@ -1346,7 +1358,7 @@ static void x86_pmu_del(struct perf_event *event, int flags)
 	event->hw.flags &= ~PERF_X86_EVENT_COMMITTED;
 
 	/*
-	 * If we're called during a txn, we don't need to do anything.
+	 * If we're called during a txn, we only need to undo x86_pmu.add.
 	 * The events never got scheduled and ->cancel_txn will truncate
 	 * the event_list.
 	 *
@@ -1354,7 +1366,7 @@ static void x86_pmu_del(struct perf_event *event, int flags)
 	 * an event added during that same TXN.
 	 */
 	if (cpuc->txn_flags & PERF_PMU_TXN_ADD)
-		return;
+		goto do_del;
 
 	/*
 	 * Not a TXN, therefore cleanup properly.
@@ -1384,6 +1396,15 @@ static void x86_pmu_del(struct perf_event *event, int flags)
 	--cpuc->n_events;
 
 	perf_event_update_userpage(event);
+
+do_del:
+	if (x86_pmu.del) {
+		/*
+		 * This is after x86_pmu_stop(); so we disable LBRs after any
+		 * event can need them etc..
+		 */
+		x86_pmu.del(event);
+	}
 }
 
 int x86_pmu_handle_irq(struct pt_regs *regs)
@@ -2247,39 +2268,26 @@ void arch_perf_update_userpage(struct perf_event *event,
 	cyc2ns_read_end(data);
 }
 
-/*
- * callchain support
- */
-
-static int backtrace_stack(void *data, char *name)
-{
-	return 0;
-}
-
-static int backtrace_address(void *data, unsigned long addr, int reliable)
-{
-	struct perf_callchain_entry_ctx *entry = data;
-
-	return perf_callchain_store(entry, addr);
-}
-
-static const struct stacktrace_ops backtrace_ops = {
-	.stack			= backtrace_stack,
-	.address		= backtrace_address,
-	.walk_stack		= print_context_stack_bp,
-};
-
 void
 perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct unwind_state state;
+	unsigned long addr;
+
 	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
 		/* TODO: We don't support guest os callchain now */
 		return;
 	}
 
-	perf_callchain_store(entry, regs->ip);
+	if (perf_callchain_store(entry, regs->ip))
+		return;
 
-	dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
+	for (unwind_start(&state, current, regs, NULL); !unwind_done(&state);
+	     unwind_next_frame(&state)) {
+		addr = unwind_get_return_address(&state);
+		if (!addr || perf_callchain_store(entry, addr))
+			return;
+	}
 }
 
 static inline int
diff --git a/arch/x86/events/intel/bts.c b/arch/x86/events/intel/bts.c
index 0a6e393..982c9e3 100644
--- a/arch/x86/events/intel/bts.c
+++ b/arch/x86/events/intel/bts.c
@@ -31,7 +31,17 @@
 struct bts_ctx {
 	struct perf_output_handle	handle;
 	struct debug_store		ds_back;
-	int				started;
+	int				state;
+};
+
+/* BTS context states: */
+enum {
+	/* no ongoing AUX transactions */
+	BTS_STATE_STOPPED = 0,
+	/* AUX transaction is on, BTS tracing is disabled */
+	BTS_STATE_INACTIVE,
+	/* AUX transaction is on, BTS tracing is running */
+	BTS_STATE_ACTIVE,
 };
 
 static DEFINE_PER_CPU(struct bts_ctx, bts_ctx);
@@ -204,6 +214,15 @@ static void bts_update(struct bts_ctx *bts)
 static int
 bts_buffer_reset(struct bts_buffer *buf, struct perf_output_handle *handle);
 
+/*
+ * Ordering PMU callbacks wrt themselves and the PMI is done by means
+ * of bts::state, which:
+ *  - is set when bts::handle::event is valid, that is, between
+ *    perf_aux_output_begin() and perf_aux_output_end();
+ *  - is zero otherwise;
+ *  - is ordered against bts::handle::event with a compiler barrier.
+ */
+
 static void __bts_event_start(struct perf_event *event)
 {
 	struct bts_ctx *bts = this_cpu_ptr(&bts_ctx);
@@ -221,10 +240,13 @@ static void __bts_event_start(struct perf_event *event)
 
 	/*
 	 * local barrier to make sure that ds configuration made it
-	 * before we enable BTS
+	 * before we enable BTS and bts::state goes ACTIVE
 	 */
 	wmb();
 
+	/* INACTIVE/STOPPED -> ACTIVE */
+	WRITE_ONCE(bts->state, BTS_STATE_ACTIVE);
+
 	intel_pmu_enable_bts(config);
 
 }
@@ -251,9 +273,6 @@ static void bts_event_start(struct perf_event *event, int flags)
 
 	__bts_event_start(event);
 
-	/* PMI handler: this counter is running and likely generating PMIs */
-	ACCESS_ONCE(bts->started) = 1;
-
 	return;
 
 fail_end_stop:
@@ -263,30 +282,34 @@ fail_stop:
 	event->hw.state = PERF_HES_STOPPED;
 }
 
-static void __bts_event_stop(struct perf_event *event)
+static void __bts_event_stop(struct perf_event *event, int state)
 {
+	struct bts_ctx *bts = this_cpu_ptr(&bts_ctx);
+
+	/* ACTIVE -> INACTIVE(PMI)/STOPPED(->stop()) */
+	WRITE_ONCE(bts->state, state);
+
 	/*
 	 * No extra synchronization is mandated by the documentation to have
 	 * BTS data stores globally visible.
 	 */
 	intel_pmu_disable_bts();
-
-	if (event->hw.state & PERF_HES_STOPPED)
-		return;
-
-	ACCESS_ONCE(event->hw.state) |= PERF_HES_STOPPED;
 }
 
 static void bts_event_stop(struct perf_event *event, int flags)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct bts_ctx *bts = this_cpu_ptr(&bts_ctx);
-	struct bts_buffer *buf = perf_get_aux(&bts->handle);
+	struct bts_buffer *buf = NULL;
+	int state = READ_ONCE(bts->state);
 
-	/* PMI handler: don't restart this counter */
-	ACCESS_ONCE(bts->started) = 0;
+	if (state == BTS_STATE_ACTIVE)
+		__bts_event_stop(event, BTS_STATE_STOPPED);
 
-	__bts_event_stop(event);
+	if (state != BTS_STATE_STOPPED)
+		buf = perf_get_aux(&bts->handle);
+
+	event->hw.state |= PERF_HES_STOPPED;
 
 	if (flags & PERF_EF_UPDATE) {
 		bts_update(bts);
@@ -296,6 +319,7 @@ static void bts_event_stop(struct perf_event *event, int flags)
 				bts->handle.head =
 					local_xchg(&buf->data_size,
 						   buf->nr_pages << PAGE_SHIFT);
+
 			perf_aux_output_end(&bts->handle, local_xchg(&buf->data_size, 0),
 					    !!local_xchg(&buf->lost, 0));
 		}
@@ -310,8 +334,20 @@ static void bts_event_stop(struct perf_event *event, int flags)
 void intel_bts_enable_local(void)
 {
 	struct bts_ctx *bts = this_cpu_ptr(&bts_ctx);
+	int state = READ_ONCE(bts->state);
+
+	/*
+	 * Here we transition from INACTIVE to ACTIVE;
+	 * if we instead are STOPPED from the interrupt handler,
+	 * stay that way. Can't be ACTIVE here though.
+	 */
+	if (WARN_ON_ONCE(state == BTS_STATE_ACTIVE))
+		return;
+
+	if (state == BTS_STATE_STOPPED)
+		return;
 
-	if (bts->handle.event && bts->started)
+	if (bts->handle.event)
 		__bts_event_start(bts->handle.event);
 }
 
@@ -319,8 +355,15 @@ void intel_bts_disable_local(void)
 {
 	struct bts_ctx *bts = this_cpu_ptr(&bts_ctx);
 
+	/*
+	 * Here we transition from ACTIVE to INACTIVE;
+	 * do nothing for STOPPED or INACTIVE.
+	 */
+	if (READ_ONCE(bts->state) != BTS_STATE_ACTIVE)
+		return;
+
 	if (bts->handle.event)
-		__bts_event_stop(bts->handle.event);
+		__bts_event_stop(bts->handle.event, BTS_STATE_INACTIVE);
 }
 
 static int
@@ -335,8 +378,6 @@ bts_buffer_reset(struct bts_buffer *buf, struct perf_output_handle *handle)
 		return 0;
 
 	head = handle->head & ((buf->nr_pages << PAGE_SHIFT) - 1);
-	if (WARN_ON_ONCE(head != local_read(&buf->head)))
-		return -EINVAL;
 
 	phys = &buf->buf[buf->cur_buf];
 	space = phys->offset + phys->displacement + phys->size - head;
@@ -403,22 +444,37 @@ bts_buffer_reset(struct bts_buffer *buf, struct perf_output_handle *handle)
 
 int intel_bts_interrupt(void)
 {
+	struct debug_store *ds = this_cpu_ptr(&cpu_hw_events)->ds;
 	struct bts_ctx *bts = this_cpu_ptr(&bts_ctx);
 	struct perf_event *event = bts->handle.event;
 	struct bts_buffer *buf;
 	s64 old_head;
-	int err;
+	int err = -ENOSPC, handled = 0;
 
-	if (!event || !bts->started)
-		return 0;
+	/*
+	 * The only surefire way of knowing if this NMI is ours is by checking
+	 * the write ptr against the PMI threshold.
+	 */
+	if (ds && (ds->bts_index >= ds->bts_interrupt_threshold))
+		handled = 1;
+
+	/*
+	 * this is wrapped in intel_bts_enable_local/intel_bts_disable_local,
+	 * so we can only be INACTIVE or STOPPED
+	 */
+	if (READ_ONCE(bts->state) == BTS_STATE_STOPPED)
+		return handled;
 
 	buf = perf_get_aux(&bts->handle);
+	if (!buf)
+		return handled;
+
 	/*
 	 * Skip snapshot counters: they don't use the interrupt, but
 	 * there's no other way of telling, because the pointer will
 	 * keep moving
 	 */
-	if (!buf || buf->snapshot)
+	if (buf->snapshot)
 		return 0;
 
 	old_head = local_read(&buf->head);
@@ -426,18 +482,27 @@ int intel_bts_interrupt(void)
 
 	/* no new data */
 	if (old_head == local_read(&buf->head))
-		return 0;
+		return handled;
 
 	perf_aux_output_end(&bts->handle, local_xchg(&buf->data_size, 0),
 			    !!local_xchg(&buf->lost, 0));
 
 	buf = perf_aux_output_begin(&bts->handle, event);
-	if (!buf)
-		return 1;
+	if (buf)
+		err = bts_buffer_reset(buf, &bts->handle);
+
+	if (err) {
+		WRITE_ONCE(bts->state, BTS_STATE_STOPPED);
 
-	err = bts_buffer_reset(buf, &bts->handle);
-	if (err)
-		perf_aux_output_end(&bts->handle, 0, false);
+		if (buf) {
+			/*
+			 * BTS_STATE_STOPPED should be visible before
+			 * cleared handle::event
+			 */
+			barrier();
+			perf_aux_output_end(&bts->handle, 0, false);
+		}
+	}
 
 	return 1;
 }
@@ -519,7 +584,8 @@ static __init int bts_init(void)
 	if (!boot_cpu_has(X86_FEATURE_DTES64) || !x86_pmu.bts)
 		return -ENODEV;
 
-	bts_pmu.capabilities	= PERF_PMU_CAP_AUX_NO_SG | PERF_PMU_CAP_ITRACE;
+	bts_pmu.capabilities	= PERF_PMU_CAP_AUX_NO_SG | PERF_PMU_CAP_ITRACE |
+				  PERF_PMU_CAP_EXCLUSIVE;
 	bts_pmu.task_ctx_nr	= perf_sw_context;
 	bts_pmu.event_init	= bts_event_init;
 	bts_pmu.add		= bts_event_add;
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 2cbde2f..a3a9eb8 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -1730,9 +1730,11 @@ static __initconst const u64 knl_hw_cache_extra_regs
  * disabled state if called consecutively.
  *
  * During consecutive calls, the same disable value will be written to related
- * registers, so the PMU state remains unchanged. hw.state in
- * intel_bts_disable_local will remain PERF_HES_STOPPED too in consecutive
- * calls.
+ * registers, so the PMU state remains unchanged.
+ *
+ * intel_bts events don't coexist with intel PMU's BTS events because of
+ * x86_add_exclusive(x86_lbr_exclusive_lbr); there's no need to keep them
+ * disabled around intel PMU's event batching etc, only inside the PMI handler.
  */
 static void __intel_pmu_disable_all(void)
 {
@@ -1742,8 +1744,6 @@ static void __intel_pmu_disable_all(void)
 
 	if (test_bit(INTEL_PMC_IDX_FIXED_BTS, cpuc->active_mask))
 		intel_pmu_disable_bts();
-	else
-		intel_bts_disable_local();
 
 	intel_pmu_pebs_disable_all();
 }
@@ -1771,8 +1771,7 @@ static void __intel_pmu_enable_all(int added, bool pmi)
 			return;
 
 		intel_pmu_enable_bts(event->hw.config);
-	} else
-		intel_bts_enable_local();
+	}
 }
 
 static void intel_pmu_enable_all(int added)
@@ -1907,13 +1906,6 @@ static void intel_pmu_disable_event(struct perf_event *event)
 	cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx);
 	cpuc->intel_cp_status &= ~(1ull << hwc->idx);
 
-	/*
-	 * must disable before any actual event
-	 * because any event may be combined with LBR
-	 */
-	if (needs_branch_stack(event))
-		intel_pmu_lbr_disable(event);
-
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_disable_fixed(hwc);
 		return;
@@ -1925,6 +1917,14 @@ static void intel_pmu_disable_event(struct perf_event *event)
 		intel_pmu_pebs_disable(event);
 }
 
+static void intel_pmu_del_event(struct perf_event *event)
+{
+	if (needs_branch_stack(event))
+		intel_pmu_lbr_del(event);
+	if (event->attr.precise_ip)
+		intel_pmu_pebs_del(event);
+}
+
 static void intel_pmu_enable_fixed(struct hw_perf_event *hwc)
 {
 	int idx = hwc->idx - INTEL_PMC_IDX_FIXED;
@@ -1968,12 +1968,6 @@ static void intel_pmu_enable_event(struct perf_event *event)
 		intel_pmu_enable_bts(hwc->config);
 		return;
 	}
-	/*
-	 * must enabled before any actual event
-	 * because any event may be combined with LBR
-	 */
-	if (needs_branch_stack(event))
-		intel_pmu_lbr_enable(event);
 
 	if (event->attr.exclude_host)
 		cpuc->intel_ctrl_guest_mask |= (1ull << hwc->idx);
@@ -1994,6 +1988,14 @@ static void intel_pmu_enable_event(struct perf_event *event)
 	__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
 }
 
+static void intel_pmu_add_event(struct perf_event *event)
+{
+	if (event->attr.precise_ip)
+		intel_pmu_pebs_add(event);
+	if (needs_branch_stack(event))
+		intel_pmu_lbr_add(event);
+}
+
 /*
  * Save and restart an expired event. Called by NMI contexts,
  * so it has to be careful about preempting normal event ops:
@@ -2073,6 +2075,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	 */
 	if (!x86_pmu.late_ack)
 		apic_write(APIC_LVTPC, APIC_DM_NMI);
+	intel_bts_disable_local();
 	__intel_pmu_disable_all();
 	handled = intel_pmu_drain_bts_buffer();
 	handled += intel_bts_interrupt();
@@ -2172,6 +2175,7 @@ done:
 	/* Only restore PMU state when it's active. See x86_pmu_disable(). */
 	if (cpuc->enabled)
 		__intel_pmu_enable_all(0, true);
+	intel_bts_enable_local();
 
 	/*
 	 * Only unmask the NMI after the overflow counters
@@ -3290,6 +3294,8 @@ static __initconst const struct x86_pmu intel_pmu = {
 	.enable_all		= intel_pmu_enable_all,
 	.enable			= intel_pmu_enable_event,
 	.disable		= intel_pmu_disable_event,
+	.add			= intel_pmu_add_event,
+	.del			= intel_pmu_del_event,
 	.hw_config		= intel_pmu_hw_config,
 	.schedule_events	= x86_schedule_events,
 	.eventsel		= MSR_ARCH_PERFMON_EVENTSEL0,
diff --git a/arch/x86/events/intel/cqm.c b/arch/x86/events/intel/cqm.c
index 783c49d..8f82b02 100644
--- a/arch/x86/events/intel/cqm.c
+++ b/arch/x86/events/intel/cqm.c
@@ -458,6 +458,11 @@ static void __intel_cqm_event_count(void *info);
 static void init_mbm_sample(u32 rmid, u32 evt_type);
 static void __intel_mbm_event_count(void *info);
 
+static bool is_cqm_event(int e)
+{
+	return (e == QOS_L3_OCCUP_EVENT_ID);
+}
+
 static bool is_mbm_event(int e)
 {
 	return (e >= QOS_MBM_TOTAL_EVENT_ID && e <= QOS_MBM_LOCAL_EVENT_ID);
@@ -1366,6 +1371,10 @@ static int intel_cqm_event_init(struct perf_event *event)
 	     (event->attr.config > QOS_MBM_LOCAL_EVENT_ID))
 		return -EINVAL;
 
+	if ((is_cqm_event(event->attr.config) && !cqm_enabled) ||
+	    (is_mbm_event(event->attr.config) && !mbm_enabled))
+		return -EINVAL;
+
 	/* unsupported modes and filters */
 	if (event->attr.exclude_user   ||
 	    event->attr.exclude_kernel ||
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 7ce9f3f..0319311 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -806,9 +806,65 @@ struct event_constraint *intel_pebs_constraints(struct perf_event *event)
 	return &emptyconstraint;
 }
 
-static inline bool pebs_is_enabled(struct cpu_hw_events *cpuc)
+/*
+ * We need the sched_task callback even for per-cpu events when we use
+ * the large interrupt threshold, such that we can provide PID and TID
+ * to PEBS samples.
+ */
+static inline bool pebs_needs_sched_cb(struct cpu_hw_events *cpuc)
+{
+	return cpuc->n_pebs && (cpuc->n_pebs == cpuc->n_large_pebs);
+}
+
+static inline void pebs_update_threshold(struct cpu_hw_events *cpuc)
+{
+	struct debug_store *ds = cpuc->ds;
+	u64 threshold;
+
+	if (cpuc->n_pebs == cpuc->n_large_pebs) {
+		threshold = ds->pebs_absolute_maximum -
+			x86_pmu.max_pebs_events * x86_pmu.pebs_record_size;
+	} else {
+		threshold = ds->pebs_buffer_base + x86_pmu.pebs_record_size;
+	}
+
+	ds->pebs_interrupt_threshold = threshold;
+}
+
+static void
+pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc, struct pmu *pmu)
 {
-	return (cpuc->pebs_enabled & ((1ULL << MAX_PEBS_EVENTS) - 1));
+	/*
+	 * Make sure we get updated with the first PEBS
+	 * event. It will trigger also during removal, but
+	 * that does not hurt:
+	 */
+	bool update = cpuc->n_pebs == 1;
+
+	if (needed_cb != pebs_needs_sched_cb(cpuc)) {
+		if (!needed_cb)
+			perf_sched_cb_inc(pmu);
+		else
+			perf_sched_cb_dec(pmu);
+
+		update = true;
+	}
+
+	if (update)
+		pebs_update_threshold(cpuc);
+}
+
+void intel_pmu_pebs_add(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	bool needed_cb = pebs_needs_sched_cb(cpuc);
+
+	cpuc->n_pebs++;
+	if (hwc->flags & PERF_X86_EVENT_FREERUNNING)
+		cpuc->n_large_pebs++;
+
+	pebs_update_state(needed_cb, cpuc, event->ctx->pmu);
 }
 
 void intel_pmu_pebs_enable(struct perf_event *event)
@@ -816,12 +872,9 @@ void intel_pmu_pebs_enable(struct perf_event *event)
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	struct debug_store *ds = cpuc->ds;
-	bool first_pebs;
-	u64 threshold;
 
 	hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT;
 
-	first_pebs = !pebs_is_enabled(cpuc);
 	cpuc->pebs_enabled |= 1ULL << hwc->idx;
 
 	if (event->hw.flags & PERF_X86_EVENT_PEBS_LDLAT)
@@ -830,46 +883,34 @@ void intel_pmu_pebs_enable(struct perf_event *event)
 		cpuc->pebs_enabled |= 1ULL << 63;
 
 	/*
-	 * When the event is constrained enough we can use a larger
-	 * threshold and run the event with less frequent PMI.
+	 * Use auto-reload if possible to save a MSR write in the PMI.
+	 * This must be done in pmu::start(), because PERF_EVENT_IOC_PERIOD.
 	 */
-	if (hwc->flags & PERF_X86_EVENT_FREERUNNING) {
-		threshold = ds->pebs_absolute_maximum -
-			x86_pmu.max_pebs_events * x86_pmu.pebs_record_size;
-
-		if (first_pebs)
-			perf_sched_cb_inc(event->ctx->pmu);
-	} else {
-		threshold = ds->pebs_buffer_base + x86_pmu.pebs_record_size;
-
-		/*
-		 * If not all events can use larger buffer,
-		 * roll back to threshold = 1
-		 */
-		if (!first_pebs &&
-		    (ds->pebs_interrupt_threshold > threshold))
-			perf_sched_cb_dec(event->ctx->pmu);
-	}
-
-	/* Use auto-reload if possible to save a MSR write in the PMI */
 	if (hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) {
 		ds->pebs_event_reset[hwc->idx] =
 			(u64)(-hwc->sample_period) & x86_pmu.cntval_mask;
 	}
+}
+
+void intel_pmu_pebs_del(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	bool needed_cb = pebs_needs_sched_cb(cpuc);
 
-	if (first_pebs || ds->pebs_interrupt_threshold > threshold)
-		ds->pebs_interrupt_threshold = threshold;
+	cpuc->n_pebs--;
+	if (hwc->flags & PERF_X86_EVENT_FREERUNNING)
+		cpuc->n_large_pebs--;
+
+	pebs_update_state(needed_cb, cpuc, event->ctx->pmu);
 }
 
 void intel_pmu_pebs_disable(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
-	struct debug_store *ds = cpuc->ds;
-	bool large_pebs = ds->pebs_interrupt_threshold >
-		ds->pebs_buffer_base + x86_pmu.pebs_record_size;
 
-	if (large_pebs)
+	if (cpuc->n_pebs == cpuc->n_large_pebs)
 		intel_pmu_drain_pebs_buffer();
 
 	cpuc->pebs_enabled &= ~(1ULL << hwc->idx);
@@ -879,9 +920,6 @@ void intel_pmu_pebs_disable(struct perf_event *event)
 	else if (event->hw.flags & PERF_X86_EVENT_PEBS_ST)
 		cpuc->pebs_enabled &= ~(1ULL << 63);
 
-	if (large_pebs && !pebs_is_enabled(cpuc))
-		perf_sched_cb_dec(event->ctx->pmu);
-
 	if (cpuc->enabled)
 		wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled);
 
@@ -1274,18 +1312,18 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 		struct pebs_record_nhm *p = at;
 		u64 pebs_status;
 
-		/* PEBS v3 has accurate status bits */
+		pebs_status = p->status & cpuc->pebs_enabled;
+		pebs_status &= (1ULL << x86_pmu.max_pebs_events) - 1;
+
+		/* PEBS v3 has more accurate status bits */
 		if (x86_pmu.intel_cap.pebs_format >= 3) {
-			for_each_set_bit(bit, (unsigned long *)&p->status,
-					 MAX_PEBS_EVENTS)
+			for_each_set_bit(bit, (unsigned long *)&pebs_status,
+					 x86_pmu.max_pebs_events)
 				counts[bit]++;
 
 			continue;
 		}
 
-		pebs_status = p->status & cpuc->pebs_enabled;
-		pebs_status &= (1ULL << x86_pmu.max_pebs_events) - 1;
-
 		/*
 		 * On some CPUs the PEBS status can be zero when PEBS is
 		 * racing with clearing of GLOBAL_STATUS.
@@ -1333,8 +1371,11 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 			continue;
 
 		event = cpuc->events[bit];
-		WARN_ON_ONCE(!event);
-		WARN_ON_ONCE(!event->attr.precise_ip);
+		if (WARN_ON_ONCE(!event))
+			continue;
+
+		if (WARN_ON_ONCE(!event->attr.precise_ip))
+			continue;
 
 		/* log dropped samples number */
 		if (error[bit])
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 707d358..fc6cf21 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -380,7 +380,6 @@ static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx)
 
 void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
 {
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct x86_perf_task_context *task_ctx;
 
 	/*
@@ -390,31 +389,21 @@ void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
 	 */
 	task_ctx = ctx ? ctx->task_ctx_data : NULL;
 	if (task_ctx) {
-		if (sched_in) {
+		if (sched_in)
 			__intel_pmu_lbr_restore(task_ctx);
-			cpuc->lbr_context = ctx;
-		} else {
+		else
 			__intel_pmu_lbr_save(task_ctx);
-		}
 		return;
 	}
 
 	/*
-	 * When sampling the branck stack in system-wide, it may be
-	 * necessary to flush the stack on context switch. This happens
-	 * when the branch stack does not tag its entries with the pid
-	 * of the current task. Otherwise it becomes impossible to
-	 * associate a branch entry with a task. This ambiguity is more
-	 * likely to appear when the branch stack supports priv level
-	 * filtering and the user sets it to monitor only at the user
-	 * level (which could be a useful measurement in system-wide
-	 * mode). In that case, the risk is high of having a branch
-	 * stack with branch from multiple tasks.
- 	 */
-	if (sched_in) {
+	 * Since a context switch can flip the address space and LBR entries
+	 * are not tagged with an identifier, we need to wipe the LBR, even for
+	 * per-cpu events. You simply cannot resolve the branches from the old
+	 * address space.
+	 */
+	if (sched_in)
 		intel_pmu_lbr_reset();
-		cpuc->lbr_context = ctx;
-	}
 }
 
 static inline bool branch_user_callstack(unsigned br_sel)
@@ -422,7 +411,7 @@ static inline bool branch_user_callstack(unsigned br_sel)
 	return (br_sel & X86_BR_USER) && (br_sel & X86_BR_CALL_STACK);
 }
 
-void intel_pmu_lbr_enable(struct perf_event *event)
+void intel_pmu_lbr_add(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct x86_perf_task_context *task_ctx;
@@ -430,27 +419,38 @@ void intel_pmu_lbr_enable(struct perf_event *event)
 	if (!x86_pmu.lbr_nr)
 		return;
 
-	/*
-	 * Reset the LBR stack if we changed task context to
-	 * avoid data leaks.
-	 */
-	if (event->ctx->task && cpuc->lbr_context != event->ctx) {
-		intel_pmu_lbr_reset();
-		cpuc->lbr_context = event->ctx;
-	}
 	cpuc->br_sel = event->hw.branch_reg.reg;
 
-	if (branch_user_callstack(cpuc->br_sel) && event->ctx &&
-					event->ctx->task_ctx_data) {
+	if (branch_user_callstack(cpuc->br_sel) && event->ctx->task_ctx_data) {
 		task_ctx = event->ctx->task_ctx_data;
 		task_ctx->lbr_callstack_users++;
 	}
 
-	cpuc->lbr_users++;
+	/*
+	 * Request pmu::sched_task() callback, which will fire inside the
+	 * regular perf event scheduling, so that call will:
+	 *
+	 *  - restore or wipe; when LBR-callstack,
+	 *  - wipe; otherwise,
+	 *
+	 * when this is from __perf_event_task_sched_in().
+	 *
+	 * However, if this is from perf_install_in_context(), no such callback
+	 * will follow and we'll need to reset the LBR here if this is the
+	 * first LBR event.
+	 *
+	 * The problem is, we cannot tell these cases apart... but we can
+	 * exclude the biggest chunk of cases by looking at
+	 * event->total_time_running. An event that has accrued runtime cannot
+	 * be 'new'. Conversely, a new event can get installed through the
+	 * context switch path for the first time.
+	 */
 	perf_sched_cb_inc(event->ctx->pmu);
+	if (!cpuc->lbr_users++ && !event->total_time_running)
+		intel_pmu_lbr_reset();
 }
 
-void intel_pmu_lbr_disable(struct perf_event *event)
+void intel_pmu_lbr_del(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct x86_perf_task_context *task_ctx;
@@ -467,12 +467,6 @@ void intel_pmu_lbr_disable(struct perf_event *event)
 	cpuc->lbr_users--;
 	WARN_ON_ONCE(cpuc->lbr_users < 0);
 	perf_sched_cb_dec(event->ctx->pmu);
-
-	if (cpuc->enabled && !cpuc->lbr_users) {
-		__intel_pmu_lbr_disable();
-		/* avoid stale pointer */
-		cpuc->lbr_context = NULL;
-	}
 }
 
 void intel_pmu_lbr_enable_all(bool pmi)
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 04bb5fb..c5047b8 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -69,6 +69,8 @@ static struct pt_cap_desc {
 	PT_CAP(psb_cyc,			0, CR_EBX, BIT(1)),
 	PT_CAP(ip_filtering,		0, CR_EBX, BIT(2)),
 	PT_CAP(mtc,			0, CR_EBX, BIT(3)),
+	PT_CAP(ptwrite,			0, CR_EBX, BIT(4)),
+	PT_CAP(power_event_trace,	0, CR_EBX, BIT(5)),
 	PT_CAP(topa_output,		0, CR_ECX, BIT(0)),
 	PT_CAP(topa_multiple_entries,	0, CR_ECX, BIT(1)),
 	PT_CAP(single_range_output,	0, CR_ECX, BIT(2)),
@@ -259,10 +261,16 @@ fail:
 #define RTIT_CTL_MTC	(RTIT_CTL_MTC_EN	| \
 			 RTIT_CTL_MTC_RANGE)
 
+#define RTIT_CTL_PTW	(RTIT_CTL_PTW_EN	| \
+			 RTIT_CTL_FUP_ON_PTW)
+
 #define PT_CONFIG_MASK (RTIT_CTL_TSC_EN		| \
 			RTIT_CTL_DISRETC	| \
 			RTIT_CTL_CYC_PSB	| \
-			RTIT_CTL_MTC)
+			RTIT_CTL_MTC		| \
+			RTIT_CTL_PWR_EVT_EN	| \
+			RTIT_CTL_FUP_ON_PTW	| \
+			RTIT_CTL_PTW_EN)
 
 static bool pt_event_valid(struct perf_event *event)
 {
@@ -311,6 +319,20 @@ static bool pt_event_valid(struct perf_event *event)
 			return false;
 	}
 
+	if (config & RTIT_CTL_PWR_EVT_EN &&
+	    !pt_cap_get(PT_CAP_power_event_trace))
+		return false;
+
+	if (config & RTIT_CTL_PTW) {
+		if (!pt_cap_get(PT_CAP_ptwrite))
+			return false;
+
+		/* FUPonPTW without PTW doesn't make sense */
+		if ((config & RTIT_CTL_FUP_ON_PTW) &&
+		    !(config & RTIT_CTL_PTW_EN))
+			return false;
+	}
+
 	return true;
 }
 
@@ -1074,6 +1096,11 @@ static void pt_addr_filters_fini(struct perf_event *event)
 	event->hw.addr_filters = NULL;
 }
 
+static inline bool valid_kernel_ip(unsigned long ip)
+{
+	return virt_addr_valid(ip) && kernel_ip(ip);
+}
+
 static int pt_event_addr_filters_validate(struct list_head *filters)
 {
 	struct perf_addr_filter *filter;
@@ -1081,11 +1108,16 @@ static int pt_event_addr_filters_validate(struct list_head *filters)
 
 	list_for_each_entry(filter, filters, entry) {
 		/* PT doesn't support single address triggers */
-		if (!filter->range)
+		if (!filter->range || !filter->size)
 			return -EOPNOTSUPP;
 
-		if (!filter->inode && !kernel_ip(filter->offset))
-			return -EINVAL;
+		if (!filter->inode) {
+			if (!valid_kernel_ip(filter->offset))
+				return -EINVAL;
+
+			if (!valid_kernel_ip(filter->offset + filter->size))
+				return -EINVAL;
+		}
 
 		if (++range > pt_cap_get(PT_CAP_num_address_ranges))
 			return -EOPNOTSUPP;
@@ -1111,7 +1143,7 @@ static void pt_event_addr_filters_sync(struct perf_event *event)
 		} else {
 			/* apply the offset */
 			msr_a = filter->offset + offs[range];
-			msr_b = filter->size + msr_a;
+			msr_b = filter->size + msr_a - 1;
 		}
 
 		filters->filter[range].msr_a  = msr_a;
diff --git a/arch/x86/events/intel/pt.h b/arch/x86/events/intel/pt.h
index efffa4a..53473c2 100644
--- a/arch/x86/events/intel/pt.h
+++ b/arch/x86/events/intel/pt.h
@@ -26,11 +26,14 @@
 #define RTIT_CTL_CYCLEACC		BIT(1)
 #define RTIT_CTL_OS			BIT(2)
 #define RTIT_CTL_USR			BIT(3)
+#define RTIT_CTL_PWR_EVT_EN		BIT(4)
+#define RTIT_CTL_FUP_ON_PTW		BIT(5)
 #define RTIT_CTL_CR3EN			BIT(7)
 #define RTIT_CTL_TOPA			BIT(8)
 #define RTIT_CTL_MTC_EN			BIT(9)
 #define RTIT_CTL_TSC_EN			BIT(10)
 #define RTIT_CTL_DISRETC		BIT(11)
+#define RTIT_CTL_PTW_EN			BIT(12)
 #define RTIT_CTL_BRANCH_EN		BIT(13)
 #define RTIT_CTL_MTC_RANGE_OFFSET	14
 #define RTIT_CTL_MTC_RANGE		(0x0full << RTIT_CTL_MTC_RANGE_OFFSET)
@@ -91,6 +94,8 @@ enum pt_capabilities {
 	PT_CAP_psb_cyc,
 	PT_CAP_ip_filtering,
 	PT_CAP_mtc,
+	PT_CAP_ptwrite,
+	PT_CAP_power_event_trace,
 	PT_CAP_topa_output,
 	PT_CAP_topa_multiple_entries,
 	PT_CAP_single_range_output,
diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c
index 2886593..b0f0e83 100644
--- a/arch/x86/events/intel/rapl.c
+++ b/arch/x86/events/intel/rapl.c
@@ -357,6 +357,8 @@ static int rapl_pmu_event_init(struct perf_event *event)
 	if (event->cpu < 0)
 		return -EINVAL;
 
+	event->event_caps |= PERF_EV_CAP_READ_ACTIVE_PKG;
+
 	/*
 	 * check event is known (determines counter)
 	 */
@@ -765,6 +767,8 @@ static const struct x86_cpu_id rapl_cpu_match[] __initconst = {
 	X86_RAPL_MODEL_MATCH(INTEL_FAM6_SKYLAKE_MOBILE,  skl_rapl_init),
 	X86_RAPL_MODEL_MATCH(INTEL_FAM6_SKYLAKE_DESKTOP, skl_rapl_init),
 	X86_RAPL_MODEL_MATCH(INTEL_FAM6_SKYLAKE_X,	 hsx_rapl_init),
+
+	X86_RAPL_MODEL_MATCH(INTEL_FAM6_ATOM_GOLDMONT, hsw_rapl_init),
 	{},
 };
 
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 463dc7a..d9844cc 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -664,6 +664,8 @@ static int uncore_pmu_event_init(struct perf_event *event)
 	event->cpu = box->cpu;
 	event->pmu_private = box;
 
+	event->event_caps |= PERF_EV_CAP_READ_ACTIVE_PKG;
+
 	event->hw.idx = -1;
 	event->hw.last_tag = ~0ULL;
 	event->hw.extra_reg.idx = EXTRA_REG_NONE;
@@ -683,7 +685,8 @@ static int uncore_pmu_event_init(struct perf_event *event)
 		/* fixed counters have event field hardcoded to zero */
 		hwc->config = 0ULL;
 	} else {
-		hwc->config = event->attr.config & pmu->type->event_mask;
+		hwc->config = event->attr.config &
+			      (pmu->type->event_mask | ((u64)pmu->type->event_mask_ext << 32));
 		if (pmu->type->ops->hw_config) {
 			ret = pmu->type->ops->hw_config(box, event);
 			if (ret)
@@ -1321,6 +1324,11 @@ static const struct intel_uncore_init_fun skl_uncore_init __initconst = {
 	.pci_init = skl_uncore_pci_init,
 };
 
+static const struct intel_uncore_init_fun skx_uncore_init __initconst = {
+	.cpu_init = skx_uncore_cpu_init,
+	.pci_init = skx_uncore_pci_init,
+};
+
 static const struct x86_cpu_id intel_uncore_match[] __initconst = {
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_NEHALEM_EP,	  nhm_uncore_init),
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_NEHALEM,	  nhm_uncore_init),
@@ -1343,6 +1351,7 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_XEON_PHI_KNL,	  knl_uncore_init),
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_SKYLAKE_DESKTOP,skl_uncore_init),
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_SKYLAKE_MOBILE, skl_uncore_init),
+	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_SKYLAKE_X,      skx_uncore_init),
 	{},
 };
 
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 78b9c23..ad986c1 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -44,6 +44,7 @@ struct intel_uncore_type {
 	unsigned perf_ctr;
 	unsigned event_ctl;
 	unsigned event_mask;
+	unsigned event_mask_ext;
 	unsigned fixed_ctr;
 	unsigned fixed_ctl;
 	unsigned box_ctl;
@@ -120,6 +121,7 @@ struct intel_uncore_box {
 };
 
 #define UNCORE_BOX_FLAG_INITIATED	0
+#define UNCORE_BOX_FLAG_CTL_OFFS8	1 /* event config registers are 8-byte apart */
 
 struct uncore_event_desc {
 	struct kobj_attribute attr;
@@ -172,6 +174,9 @@ static inline unsigned uncore_pci_fixed_ctr(struct intel_uncore_box *box)
 static inline
 unsigned uncore_pci_event_ctl(struct intel_uncore_box *box, int idx)
 {
+	if (test_bit(UNCORE_BOX_FLAG_CTL_OFFS8, &box->flags))
+		return idx * 8 + box->pmu->type->event_ctl;
+
 	return idx * 4 + box->pmu->type->event_ctl;
 }
 
@@ -377,6 +382,8 @@ int bdx_uncore_pci_init(void);
 void bdx_uncore_cpu_init(void);
 int knl_uncore_pci_init(void);
 void knl_uncore_cpu_init(void);
+int skx_uncore_pci_init(void);
+void skx_uncore_cpu_init(void);
 
 /* perf_event_intel_uncore_nhmex.c */
 void nhmex_uncore_cpu_init(void);
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 9d35ec0..5f845ee 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -388,6 +388,8 @@ static int snb_uncore_imc_event_init(struct perf_event *event)
 	event->cpu = box->cpu;
 	event->pmu_private = box;
 
+	event->event_caps |= PERF_EV_CAP_READ_ACTIVE_PKG;
+
 	event->hw.idx = -1;
 	event->hw.last_tag = ~0ULL;
 	event->hw.extra_reg.idx = EXTRA_REG_NONE;
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 8aee83b..2724277 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -1,6 +1,10 @@
 /* SandyBridge-EP/IvyTown uncore support */
 #include "uncore.h"
 
+/* SNB-EP pci bus to socket mapping */
+#define SNBEP_CPUNODEID			0x40
+#define SNBEP_GIDNIDMAP			0x54
+
 /* SNB-EP Box level control */
 #define SNBEP_PMON_BOX_CTL_RST_CTRL	(1 << 0)
 #define SNBEP_PMON_BOX_CTL_RST_CTRS	(1 << 1)
@@ -264,15 +268,72 @@
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_INVERT | \
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_EDGE_DET)
 
+/* SKX pci bus to socket mapping */
+#define SKX_CPUNODEID			0xc0
+#define SKX_GIDNIDMAP			0xd4
+
+/* SKX CHA */
+#define SKX_CHA_MSR_PMON_BOX_FILTER_TID		(0x1ffULL << 0)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_LINK	(0xfULL << 9)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_STATE	(0x3ffULL << 17)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_REM		(0x1ULL << 32)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_LOC		(0x1ULL << 33)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_ALL_OPC	(0x1ULL << 35)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_NM		(0x1ULL << 36)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_NOT_NM	(0x1ULL << 37)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_OPC0	(0x3ffULL << 41)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_OPC1	(0x3ffULL << 51)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_C6		(0x1ULL << 61)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_NC		(0x1ULL << 62)
+#define SKX_CHA_MSR_PMON_BOX_FILTER_ISOC	(0x1ULL << 63)
+
+/* SKX IIO */
+#define SKX_IIO0_MSR_PMON_CTL0		0xa48
+#define SKX_IIO0_MSR_PMON_CTR0		0xa41
+#define SKX_IIO0_MSR_PMON_BOX_CTL	0xa40
+#define SKX_IIO_MSR_OFFSET		0x20
+
+#define SKX_PMON_CTL_TRESH_MASK		(0xff << 24)
+#define SKX_PMON_CTL_TRESH_MASK_EXT	(0xf)
+#define SKX_PMON_CTL_CH_MASK		(0xff << 4)
+#define SKX_PMON_CTL_FC_MASK		(0x7 << 12)
+#define SKX_IIO_PMON_RAW_EVENT_MASK	(SNBEP_PMON_CTL_EV_SEL_MASK | \
+					 SNBEP_PMON_CTL_UMASK_MASK | \
+					 SNBEP_PMON_CTL_EDGE_DET | \
+					 SNBEP_PMON_CTL_INVERT | \
+					 SKX_PMON_CTL_TRESH_MASK)
+#define SKX_IIO_PMON_RAW_EVENT_MASK_EXT	(SKX_PMON_CTL_TRESH_MASK_EXT | \
+					 SKX_PMON_CTL_CH_MASK | \
+					 SKX_PMON_CTL_FC_MASK)
+
+/* SKX IRP */
+#define SKX_IRP0_MSR_PMON_CTL0		0xa5b
+#define SKX_IRP0_MSR_PMON_CTR0		0xa59
+#define SKX_IRP0_MSR_PMON_BOX_CTL	0xa58
+#define SKX_IRP_MSR_OFFSET		0x20
+
+/* SKX UPI */
+#define SKX_UPI_PCI_PMON_CTL0		0x350
+#define SKX_UPI_PCI_PMON_CTR0		0x318
+#define SKX_UPI_PCI_PMON_BOX_CTL	0x378
+#define SKX_PMON_CTL_UMASK_EXT		0xff
+
+/* SKX M2M */
+#define SKX_M2M_PCI_PMON_CTL0		0x228
+#define SKX_M2M_PCI_PMON_CTR0		0x200
+#define SKX_M2M_PCI_PMON_BOX_CTL	0x258
+
 DEFINE_UNCORE_FORMAT_ATTR(event, event, "config:0-7");
 DEFINE_UNCORE_FORMAT_ATTR(event2, event, "config:0-6");
 DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
 DEFINE_UNCORE_FORMAT_ATTR(use_occ_ctr, use_occ_ctr, "config:7");
 DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
+DEFINE_UNCORE_FORMAT_ATTR(umask_ext, umask, "config:8-15,32-39");
 DEFINE_UNCORE_FORMAT_ATTR(qor, qor, "config:16");
 DEFINE_UNCORE_FORMAT_ATTR(edge, edge, "config:18");
 DEFINE_UNCORE_FORMAT_ATTR(tid_en, tid_en, "config:19");
 DEFINE_UNCORE_FORMAT_ATTR(inv, inv, "config:23");
+DEFINE_UNCORE_FORMAT_ATTR(thresh9, thresh, "config:24-35");
 DEFINE_UNCORE_FORMAT_ATTR(thresh8, thresh, "config:24-31");
 DEFINE_UNCORE_FORMAT_ATTR(thresh6, thresh, "config:24-29");
 DEFINE_UNCORE_FORMAT_ATTR(thresh5, thresh, "config:24-28");
@@ -280,6 +341,8 @@ DEFINE_UNCORE_FORMAT_ATTR(occ_sel, occ_sel, "config:14-15");
 DEFINE_UNCORE_FORMAT_ATTR(occ_invert, occ_invert, "config:30");
 DEFINE_UNCORE_FORMAT_ATTR(occ_edge, occ_edge, "config:14-51");
 DEFINE_UNCORE_FORMAT_ATTR(occ_edge_det, occ_edge_det, "config:31");
+DEFINE_UNCORE_FORMAT_ATTR(ch_mask, ch_mask, "config:36-43");
+DEFINE_UNCORE_FORMAT_ATTR(fc_mask, fc_mask, "config:44-46");
 DEFINE_UNCORE_FORMAT_ATTR(filter_tid, filter_tid, "config1:0-4");
 DEFINE_UNCORE_FORMAT_ATTR(filter_tid2, filter_tid, "config1:0");
 DEFINE_UNCORE_FORMAT_ATTR(filter_tid3, filter_tid, "config1:0-5");
@@ -288,18 +351,26 @@ DEFINE_UNCORE_FORMAT_ATTR(filter_cid, filter_cid, "config1:5");
 DEFINE_UNCORE_FORMAT_ATTR(filter_link, filter_link, "config1:5-8");
 DEFINE_UNCORE_FORMAT_ATTR(filter_link2, filter_link, "config1:6-8");
 DEFINE_UNCORE_FORMAT_ATTR(filter_link3, filter_link, "config1:12");
+DEFINE_UNCORE_FORMAT_ATTR(filter_link4, filter_link, "config1:9-12");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nid, filter_nid, "config1:10-17");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nid2, filter_nid, "config1:32-47");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state, filter_state, "config1:18-22");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state2, filter_state, "config1:17-22");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state3, filter_state, "config1:17-23");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state4, filter_state, "config1:18-20");
+DEFINE_UNCORE_FORMAT_ATTR(filter_state5, filter_state, "config1:17-26");
+DEFINE_UNCORE_FORMAT_ATTR(filter_rem, filter_rem, "config1:32");
+DEFINE_UNCORE_FORMAT_ATTR(filter_loc, filter_loc, "config1:33");
+DEFINE_UNCORE_FORMAT_ATTR(filter_nm, filter_nm, "config1:36");
+DEFINE_UNCORE_FORMAT_ATTR(filter_not_nm, filter_not_nm, "config1:37");
 DEFINE_UNCORE_FORMAT_ATTR(filter_local, filter_local, "config1:33");
 DEFINE_UNCORE_FORMAT_ATTR(filter_all_op, filter_all_op, "config1:35");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nnm, filter_nnm, "config1:37");
 DEFINE_UNCORE_FORMAT_ATTR(filter_opc, filter_opc, "config1:23-31");
 DEFINE_UNCORE_FORMAT_ATTR(filter_opc2, filter_opc, "config1:52-60");
 DEFINE_UNCORE_FORMAT_ATTR(filter_opc3, filter_opc, "config1:41-60");
+DEFINE_UNCORE_FORMAT_ATTR(filter_opc_0, filter_opc0, "config1:41-50");
+DEFINE_UNCORE_FORMAT_ATTR(filter_opc_1, filter_opc1, "config1:51-60");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nc, filter_nc, "config1:62");
 DEFINE_UNCORE_FORMAT_ATTR(filter_c6, filter_c6, "config1:61");
 DEFINE_UNCORE_FORMAT_ATTR(filter_isoc, filter_isoc, "config1:63");
@@ -1153,7 +1224,7 @@ static struct pci_driver snbep_uncore_pci_driver = {
 /*
  * build pci bus to socket mapping
  */
-static int snbep_pci2phy_map_init(int devid)
+static int snbep_pci2phy_map_init(int devid, int nodeid_loc, int idmap_loc, bool reverse)
 {
 	struct pci_dev *ubox_dev = NULL;
 	int i, bus, nodeid, segment;
@@ -1168,12 +1239,12 @@ static int snbep_pci2phy_map_init(int devid)
 			break;
 		bus = ubox_dev->bus->number;
 		/* get the Node ID of the local register */
-		err = pci_read_config_dword(ubox_dev, 0x40, &config);
+		err = pci_read_config_dword(ubox_dev, nodeid_loc, &config);
 		if (err)
 			break;
 		nodeid = config;
 		/* get the Node ID mapping */
-		err = pci_read_config_dword(ubox_dev, 0x54, &config);
+		err = pci_read_config_dword(ubox_dev, idmap_loc, &config);
 		if (err)
 			break;
 
@@ -1207,11 +1278,20 @@ static int snbep_pci2phy_map_init(int devid)
 		raw_spin_lock(&pci2phy_map_lock);
 		list_for_each_entry(map, &pci2phy_map_head, list) {
 			i = -1;
-			for (bus = 255; bus >= 0; bus--) {
-				if (map->pbus_to_physid[bus] >= 0)
-					i = map->pbus_to_physid[bus];
-				else
-					map->pbus_to_physid[bus] = i;
+			if (reverse) {
+				for (bus = 255; bus >= 0; bus--) {
+					if (map->pbus_to_physid[bus] >= 0)
+						i = map->pbus_to_physid[bus];
+					else
+						map->pbus_to_physid[bus] = i;
+				}
+			} else {
+				for (bus = 0; bus <= 255; bus++) {
+					if (map->pbus_to_physid[bus] >= 0)
+						i = map->pbus_to_physid[bus];
+					else
+						map->pbus_to_physid[bus] = i;
+				}
 			}
 		}
 		raw_spin_unlock(&pci2phy_map_lock);
@@ -1224,7 +1304,7 @@ static int snbep_pci2phy_map_init(int devid)
 
 int snbep_uncore_pci_init(void)
 {
-	int ret = snbep_pci2phy_map_init(0x3ce0);
+	int ret = snbep_pci2phy_map_init(0x3ce0, SNBEP_CPUNODEID, SNBEP_GIDNIDMAP, true);
 	if (ret)
 		return ret;
 	uncore_pci_uncores = snbep_pci_uncores;
@@ -1788,7 +1868,7 @@ static struct pci_driver ivbep_uncore_pci_driver = {
 
 int ivbep_uncore_pci_init(void)
 {
-	int ret = snbep_pci2phy_map_init(0x0e1e);
+	int ret = snbep_pci2phy_map_init(0x0e1e, SNBEP_CPUNODEID, SNBEP_GIDNIDMAP, true);
 	if (ret)
 		return ret;
 	uncore_pci_uncores = ivbep_pci_uncores;
@@ -2897,7 +2977,7 @@ static struct pci_driver hswep_uncore_pci_driver = {
 
 int hswep_uncore_pci_init(void)
 {
-	int ret = snbep_pci2phy_map_init(0x2f1e);
+	int ret = snbep_pci2phy_map_init(0x2f1e, SNBEP_CPUNODEID, SNBEP_GIDNIDMAP, true);
 	if (ret)
 		return ret;
 	uncore_pci_uncores = hswep_pci_uncores;
@@ -3186,7 +3266,7 @@ static struct pci_driver bdx_uncore_pci_driver = {
 
 int bdx_uncore_pci_init(void)
 {
-	int ret = snbep_pci2phy_map_init(0x6f1e);
+	int ret = snbep_pci2phy_map_init(0x6f1e, SNBEP_CPUNODEID, SNBEP_GIDNIDMAP, true);
 
 	if (ret)
 		return ret;
@@ -3196,3 +3276,525 @@ int bdx_uncore_pci_init(void)
 }
 
 /* end of BDX uncore support */
+
+/* SKX uncore support */
+
+static struct intel_uncore_type skx_uncore_ubox = {
+	.name			= "ubox",
+	.num_counters		= 2,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.fixed_ctr_bits		= 48,
+	.perf_ctr		= HSWEP_U_MSR_PMON_CTR0,
+	.event_ctl		= HSWEP_U_MSR_PMON_CTL0,
+	.event_mask		= SNBEP_U_MSR_PMON_RAW_EVENT_MASK,
+	.fixed_ctr		= HSWEP_U_MSR_PMON_UCLK_FIXED_CTR,
+	.fixed_ctl		= HSWEP_U_MSR_PMON_UCLK_FIXED_CTL,
+	.ops			= &ivbep_uncore_msr_ops,
+	.format_group		= &ivbep_uncore_ubox_format_group,
+};
+
+static struct attribute *skx_uncore_cha_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_edge.attr,
+	&format_attr_tid_en.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh8.attr,
+	&format_attr_filter_tid4.attr,
+	&format_attr_filter_link4.attr,
+	&format_attr_filter_state5.attr,
+	&format_attr_filter_rem.attr,
+	&format_attr_filter_loc.attr,
+	&format_attr_filter_nm.attr,
+	&format_attr_filter_all_op.attr,
+	&format_attr_filter_not_nm.attr,
+	&format_attr_filter_opc_0.attr,
+	&format_attr_filter_opc_1.attr,
+	&format_attr_filter_nc.attr,
+	&format_attr_filter_c6.attr,
+	&format_attr_filter_isoc.attr,
+	NULL,
+};
+
+static struct attribute_group skx_uncore_chabox_format_group = {
+	.name = "format",
+	.attrs = skx_uncore_cha_formats_attr,
+};
+
+static struct event_constraint skx_uncore_chabox_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x11, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x36, 0x1),
+	EVENT_CONSTRAINT_END
+};
+
+static struct extra_reg skx_uncore_cha_extra_regs[] = {
+	SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x1134, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x2134, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x8134, 0xffff, 0x4),
+};
+
+static u64 skx_cha_filter_mask(int fields)
+{
+	u64 mask = 0;
+
+	if (fields & 0x1)
+		mask |= SKX_CHA_MSR_PMON_BOX_FILTER_TID;
+	if (fields & 0x2)
+		mask |= SKX_CHA_MSR_PMON_BOX_FILTER_LINK;
+	if (fields & 0x4)
+		mask |= SKX_CHA_MSR_PMON_BOX_FILTER_STATE;
+	return mask;
+}
+
+static struct event_constraint *
+skx_cha_get_constraint(struct intel_uncore_box *box, struct perf_event *event)
+{
+	return __snbep_cbox_get_constraint(box, event, skx_cha_filter_mask);
+}
+
+static int skx_cha_hw_config(struct intel_uncore_box *box, struct perf_event *event)
+{
+	struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
+	struct extra_reg *er;
+	int idx = 0;
+
+	for (er = skx_uncore_cha_extra_regs; er->msr; er++) {
+		if (er->event != (event->hw.config & er->config_mask))
+			continue;
+		idx |= er->idx;
+	}
+
+	if (idx) {
+		reg1->reg = HSWEP_C0_MSR_PMON_BOX_FILTER0 +
+			    HSWEP_CBO_MSR_OFFSET * box->pmu->pmu_idx;
+		reg1->config = event->attr.config1 & skx_cha_filter_mask(idx);
+		reg1->idx = idx;
+	}
+	return 0;
+}
+
+static struct intel_uncore_ops skx_uncore_chabox_ops = {
+	/* There is no frz_en for chabox ctl */
+	.init_box		= ivbep_uncore_msr_init_box,
+	.disable_box		= snbep_uncore_msr_disable_box,
+	.enable_box		= snbep_uncore_msr_enable_box,
+	.disable_event		= snbep_uncore_msr_disable_event,
+	.enable_event		= hswep_cbox_enable_event,
+	.read_counter		= uncore_msr_read_counter,
+	.hw_config		= skx_cha_hw_config,
+	.get_constraint		= skx_cha_get_constraint,
+	.put_constraint		= snbep_cbox_put_constraint,
+};
+
+static struct intel_uncore_type skx_uncore_chabox = {
+	.name			= "cha",
+	.num_counters		= 4,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= HSWEP_C0_MSR_PMON_CTL0,
+	.perf_ctr		= HSWEP_C0_MSR_PMON_CTR0,
+	.event_mask		= HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
+	.box_ctl		= HSWEP_C0_MSR_PMON_BOX_CTL,
+	.msr_offset		= HSWEP_CBO_MSR_OFFSET,
+	.num_shared_regs	= 1,
+	.constraints		= skx_uncore_chabox_constraints,
+	.ops			= &skx_uncore_chabox_ops,
+	.format_group		= &skx_uncore_chabox_format_group,
+};
+
+static struct attribute *skx_uncore_iio_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_edge.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh9.attr,
+	&format_attr_ch_mask.attr,
+	&format_attr_fc_mask.attr,
+	NULL,
+};
+
+static struct attribute_group skx_uncore_iio_format_group = {
+	.name = "format",
+	.attrs = skx_uncore_iio_formats_attr,
+};
+
+static struct event_constraint skx_uncore_iio_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x83, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x88, 0xc),
+	UNCORE_EVENT_CONSTRAINT(0x95, 0xc),
+	UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
+	UNCORE_EVENT_CONSTRAINT(0xc5, 0xc),
+	UNCORE_EVENT_CONSTRAINT(0xd4, 0xc),
+	EVENT_CONSTRAINT_END
+};
+
+static void skx_iio_enable_event(struct intel_uncore_box *box,
+				 struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	wrmsrl(hwc->config_base, hwc->config | SNBEP_PMON_CTL_EN);
+}
+
+static struct intel_uncore_ops skx_uncore_iio_ops = {
+	.init_box		= ivbep_uncore_msr_init_box,
+	.disable_box		= snbep_uncore_msr_disable_box,
+	.enable_box		= snbep_uncore_msr_enable_box,
+	.disable_event		= snbep_uncore_msr_disable_event,
+	.enable_event		= skx_iio_enable_event,
+	.read_counter		= uncore_msr_read_counter,
+};
+
+static struct intel_uncore_type skx_uncore_iio = {
+	.name			= "iio",
+	.num_counters		= 4,
+	.num_boxes		= 5,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= SKX_IIO0_MSR_PMON_CTL0,
+	.perf_ctr		= SKX_IIO0_MSR_PMON_CTR0,
+	.event_mask		= SKX_IIO_PMON_RAW_EVENT_MASK,
+	.event_mask_ext		= SKX_IIO_PMON_RAW_EVENT_MASK_EXT,
+	.box_ctl		= SKX_IIO0_MSR_PMON_BOX_CTL,
+	.msr_offset		= SKX_IIO_MSR_OFFSET,
+	.constraints		= skx_uncore_iio_constraints,
+	.ops			= &skx_uncore_iio_ops,
+	.format_group		= &skx_uncore_iio_format_group,
+};
+
+static struct attribute *skx_uncore_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_edge.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh8.attr,
+	NULL,
+};
+
+static struct attribute_group skx_uncore_format_group = {
+	.name = "format",
+	.attrs = skx_uncore_formats_attr,
+};
+
+static struct intel_uncore_type skx_uncore_irp = {
+	.name			= "irp",
+	.num_counters		= 2,
+	.num_boxes		= 5,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= SKX_IRP0_MSR_PMON_CTL0,
+	.perf_ctr		= SKX_IRP0_MSR_PMON_CTR0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SKX_IRP0_MSR_PMON_BOX_CTL,
+	.msr_offset		= SKX_IRP_MSR_OFFSET,
+	.ops			= &skx_uncore_iio_ops,
+	.format_group		= &skx_uncore_format_group,
+};
+
+static struct intel_uncore_ops skx_uncore_pcu_ops = {
+	IVBEP_UNCORE_MSR_OPS_COMMON_INIT(),
+	.hw_config		= hswep_pcu_hw_config,
+	.get_constraint		= snbep_pcu_get_constraint,
+	.put_constraint		= snbep_pcu_put_constraint,
+};
+
+static struct intel_uncore_type skx_uncore_pcu = {
+	.name			= "pcu",
+	.num_counters		= 4,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= HSWEP_PCU_MSR_PMON_CTR0,
+	.event_ctl		= HSWEP_PCU_MSR_PMON_CTL0,
+	.event_mask		= SNBEP_PCU_MSR_PMON_RAW_EVENT_MASK,
+	.box_ctl		= HSWEP_PCU_MSR_PMON_BOX_CTL,
+	.num_shared_regs	= 1,
+	.ops			= &skx_uncore_pcu_ops,
+	.format_group		= &snbep_uncore_pcu_format_group,
+};
+
+static struct intel_uncore_type *skx_msr_uncores[] = {
+	&skx_uncore_ubox,
+	&skx_uncore_chabox,
+	&skx_uncore_iio,
+	&skx_uncore_irp,
+	&skx_uncore_pcu,
+	NULL,
+};
+
+static int skx_count_chabox(void)
+{
+	struct pci_dev *chabox_dev = NULL;
+	int bus, count = 0;
+
+	while (1) {
+		chabox_dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x208d, chabox_dev);
+		if (!chabox_dev)
+			break;
+		if (count == 0)
+			bus = chabox_dev->bus->number;
+		if (bus != chabox_dev->bus->number)
+			break;
+		count++;
+	}
+
+	pci_dev_put(chabox_dev);
+	return count;
+}
+
+void skx_uncore_cpu_init(void)
+{
+	skx_uncore_chabox.num_boxes = skx_count_chabox();
+	uncore_msr_uncores = skx_msr_uncores;
+}
+
+static struct intel_uncore_type skx_uncore_imc = {
+	.name		= "imc",
+	.num_counters   = 4,
+	.num_boxes	= 6,
+	.perf_ctr_bits	= 48,
+	.fixed_ctr_bits	= 48,
+	.fixed_ctr	= SNBEP_MC_CHy_PCI_PMON_FIXED_CTR,
+	.fixed_ctl	= SNBEP_MC_CHy_PCI_PMON_FIXED_CTL,
+	.event_descs	= hswep_uncore_imc_events,
+	.perf_ctr	= SNBEP_PCI_PMON_CTR0,
+	.event_ctl	= SNBEP_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= SNBEP_PCI_PMON_BOX_CTL,
+	.ops		= &ivbep_uncore_pci_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+static struct attribute *skx_upi_uncore_formats_attr[] = {
+	&format_attr_event_ext.attr,
+	&format_attr_umask_ext.attr,
+	&format_attr_edge.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh8.attr,
+	NULL,
+};
+
+static struct attribute_group skx_upi_uncore_format_group = {
+	.name = "format",
+	.attrs = skx_upi_uncore_formats_attr,
+};
+
+static void skx_upi_uncore_pci_init_box(struct intel_uncore_box *box)
+{
+	struct pci_dev *pdev = box->pci_dev;
+
+	__set_bit(UNCORE_BOX_FLAG_CTL_OFFS8, &box->flags);
+	pci_write_config_dword(pdev, SKX_UPI_PCI_PMON_BOX_CTL, IVBEP_PMON_BOX_CTL_INT);
+}
+
+static struct intel_uncore_ops skx_upi_uncore_pci_ops = {
+	.init_box	= skx_upi_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= snbep_uncore_pci_enable_box,
+	.disable_event	= snbep_uncore_pci_disable_event,
+	.enable_event	= snbep_uncore_pci_enable_event,
+	.read_counter	= snbep_uncore_pci_read_counter,
+};
+
+static struct intel_uncore_type skx_uncore_upi = {
+	.name		= "upi",
+	.num_counters   = 4,
+	.num_boxes	= 3,
+	.perf_ctr_bits	= 48,
+	.perf_ctr	= SKX_UPI_PCI_PMON_CTR0,
+	.event_ctl	= SKX_UPI_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_QPI_PCI_PMON_RAW_EVENT_MASK,
+	.event_mask_ext = SKX_PMON_CTL_UMASK_EXT,
+	.box_ctl	= SKX_UPI_PCI_PMON_BOX_CTL,
+	.ops		= &skx_upi_uncore_pci_ops,
+	.format_group	= &skx_upi_uncore_format_group,
+};
+
+static void skx_m2m_uncore_pci_init_box(struct intel_uncore_box *box)
+{
+	struct pci_dev *pdev = box->pci_dev;
+
+	__set_bit(UNCORE_BOX_FLAG_CTL_OFFS8, &box->flags);
+	pci_write_config_dword(pdev, SKX_M2M_PCI_PMON_BOX_CTL, IVBEP_PMON_BOX_CTL_INT);
+}
+
+static struct intel_uncore_ops skx_m2m_uncore_pci_ops = {
+	.init_box	= skx_m2m_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= snbep_uncore_pci_enable_box,
+	.disable_event	= snbep_uncore_pci_disable_event,
+	.enable_event	= snbep_uncore_pci_enable_event,
+	.read_counter	= snbep_uncore_pci_read_counter,
+};
+
+static struct intel_uncore_type skx_uncore_m2m = {
+	.name		= "m2m",
+	.num_counters   = 4,
+	.num_boxes	= 2,
+	.perf_ctr_bits	= 48,
+	.perf_ctr	= SKX_M2M_PCI_PMON_CTR0,
+	.event_ctl	= SKX_M2M_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= SKX_M2M_PCI_PMON_BOX_CTL,
+	.ops		= &skx_m2m_uncore_pci_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+static struct event_constraint skx_uncore_m2pcie_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type skx_uncore_m2pcie = {
+	.name		= "m2pcie",
+	.num_counters   = 4,
+	.num_boxes	= 4,
+	.perf_ctr_bits	= 48,
+	.constraints	= skx_uncore_m2pcie_constraints,
+	.perf_ctr	= SNBEP_PCI_PMON_CTR0,
+	.event_ctl	= SNBEP_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= SNBEP_PCI_PMON_BOX_CTL,
+	.ops		= &ivbep_uncore_pci_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+static struct event_constraint skx_uncore_m3upi_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x1d, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x1e, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x40, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x4e, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x4f, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x50, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x51, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x52, 0x7),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type skx_uncore_m3upi = {
+	.name		= "m3upi",
+	.num_counters   = 3,
+	.num_boxes	= 3,
+	.perf_ctr_bits	= 48,
+	.constraints	= skx_uncore_m3upi_constraints,
+	.perf_ctr	= SNBEP_PCI_PMON_CTR0,
+	.event_ctl	= SNBEP_PCI_PMON_CTL0,
+	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
+	.box_ctl	= SNBEP_PCI_PMON_BOX_CTL,
+	.ops		= &ivbep_uncore_pci_ops,
+	.format_group	= &skx_uncore_format_group,
+};
+
+enum {
+	SKX_PCI_UNCORE_IMC,
+	SKX_PCI_UNCORE_M2M,
+	SKX_PCI_UNCORE_UPI,
+	SKX_PCI_UNCORE_M2PCIE,
+	SKX_PCI_UNCORE_M3UPI,
+};
+
+static struct intel_uncore_type *skx_pci_uncores[] = {
+	[SKX_PCI_UNCORE_IMC]	= &skx_uncore_imc,
+	[SKX_PCI_UNCORE_M2M]	= &skx_uncore_m2m,
+	[SKX_PCI_UNCORE_UPI]	= &skx_uncore_upi,
+	[SKX_PCI_UNCORE_M2PCIE]	= &skx_uncore_m2pcie,
+	[SKX_PCI_UNCORE_M3UPI]	= &skx_uncore_m3upi,
+	NULL,
+};
+
+static const struct pci_device_id skx_uncore_pci_ids[] = {
+	{ /* MC0 Channel 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2042),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(10, 2, SKX_PCI_UNCORE_IMC, 0),
+	},
+	{ /* MC0 Channel 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2046),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(10, 6, SKX_PCI_UNCORE_IMC, 1),
+	},
+	{ /* MC0 Channel 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204a),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(11, 2, SKX_PCI_UNCORE_IMC, 2),
+	},
+	{ /* MC1 Channel 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2042),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(12, 2, SKX_PCI_UNCORE_IMC, 3),
+	},
+	{ /* MC1 Channel 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2046),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(12, 6, SKX_PCI_UNCORE_IMC, 4),
+	},
+	{ /* MC1 Channel 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204a),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(13, 2, SKX_PCI_UNCORE_IMC, 5),
+	},
+	{ /* M2M0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2066),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(8, 0, SKX_PCI_UNCORE_M2M, 0),
+	},
+	{ /* M2M1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2066),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(9, 0, SKX_PCI_UNCORE_M2M, 1),
+	},
+	{ /* UPI0 Link 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2058),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(14, 0, SKX_PCI_UNCORE_UPI, 0),
+	},
+	{ /* UPI0 Link 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2058),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(15, 0, SKX_PCI_UNCORE_UPI, 1),
+	},
+	{ /* UPI1 Link 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2058),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(16, 0, SKX_PCI_UNCORE_UPI, 2),
+	},
+	{ /* M2PCIe 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2088),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(21, 1, SKX_PCI_UNCORE_M2PCIE, 0),
+	},
+	{ /* M2PCIe 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2088),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(22, 1, SKX_PCI_UNCORE_M2PCIE, 1),
+	},
+	{ /* M2PCIe 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2088),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(23, 1, SKX_PCI_UNCORE_M2PCIE, 2),
+	},
+	{ /* M2PCIe 3 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2088),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(21, 5, SKX_PCI_UNCORE_M2PCIE, 3),
+	},
+	{ /* M3UPI0 Link 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 0, SKX_PCI_UNCORE_M3UPI, 0),
+	},
+	{ /* M3UPI0 Link 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204D),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 1, SKX_PCI_UNCORE_M3UPI, 1),
+	},
+	{ /* M3UPI1 Link 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x204C),
+		.driver_data = UNCORE_PCI_DEV_FULL_DATA(18, 4, SKX_PCI_UNCORE_M3UPI, 2),
+	},
+	{ /* end: all zeroes */ }
+};
+
+
+static struct pci_driver skx_uncore_pci_driver = {
+	.name		= "skx_uncore",
+	.id_table	= skx_uncore_pci_ids,
+};
+
+int skx_uncore_pci_init(void)
+{
+	/* need to double check pci address */
+	int ret = snbep_pci2phy_map_init(0x2014, SKX_CPUNODEID, SKX_GIDNIDMAP, false);
+
+	if (ret)
+		return ret;
+
+	uncore_pci_uncores = skx_pci_uncores;
+	uncore_pci_driver = &skx_uncore_pci_driver;
+	return 0;
+}
+
+/* end of SKX uncore support */
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index 8c4a477..5874d8d 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -194,12 +194,13 @@ struct cpu_hw_events {
 	 */
 	struct debug_store	*ds;
 	u64			pebs_enabled;
+	int			n_pebs;
+	int			n_large_pebs;
 
 	/*
 	 * Intel LBR bits
 	 */
 	int				lbr_users;
-	void				*lbr_context;
 	struct perf_branch_stack	lbr_stack;
 	struct perf_branch_entry	lbr_entries[MAX_LBR_ENTRIES];
 	struct er_account		*lbr_sel;
@@ -508,6 +509,8 @@ struct x86_pmu {
 	void		(*enable_all)(int added);
 	void		(*enable)(struct perf_event *);
 	void		(*disable)(struct perf_event *);
+	void		(*add)(struct perf_event *);
+	void		(*del)(struct perf_event *);
 	int		(*hw_config)(struct perf_event *event);
 	int		(*schedule_events)(struct cpu_hw_events *cpuc, int n, int *assign);
 	unsigned	eventsel;
@@ -888,6 +891,10 @@ extern struct event_constraint intel_skl_pebs_event_constraints[];
 
 struct event_constraint *intel_pebs_constraints(struct perf_event *event);
 
+void intel_pmu_pebs_add(struct perf_event *event);
+
+void intel_pmu_pebs_del(struct perf_event *event);
+
 void intel_pmu_pebs_enable(struct perf_event *event);
 
 void intel_pmu_pebs_disable(struct perf_event *event);
@@ -906,9 +913,9 @@ u64 lbr_from_signext_quirk_wr(u64 val);
 
 void intel_pmu_lbr_reset(void);
 
-void intel_pmu_lbr_enable(struct perf_event *event);
+void intel_pmu_lbr_add(struct perf_event *event);
 
-void intel_pmu_lbr_disable(struct perf_event *event);
+void intel_pmu_lbr_del(struct perf_event *event);
 
 void intel_pmu_lbr_enable_all(bool pmi);
 
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 2f29f4e..cb13c05 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -378,7 +378,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
 		put_user_ex(*((u64 *)&code), (u64 __user *)frame->retcode);
 	} put_user_catch(err);
 
-	err |= copy_siginfo_to_user32(&frame->info, &ksig->info);
+	err |= __copy_siginfo_to_user32(&frame->info, &ksig->info, false);
 	err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
 				     regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index e77a644..1b02038 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -217,10 +217,14 @@ static inline int alternatives_text_reserved(void *start, void *end)
  */
 #define alternative_call_2(oldfunc, newfunc1, feature1, newfunc2, feature2,   \
 			   output, input...)				      \
+{									      \
+	register void *__sp asm(_ASM_SP);				      \
 	asm volatile (ALTERNATIVE_2("call %P[old]", "call %P[new1]", feature1,\
 		"call %P[new2]", feature2)				      \
-		: output : [old] "i" (oldfunc), [new1] "i" (newfunc1),	      \
-		[new2] "i" (newfunc2), ## input)
+		: output, "+r" (__sp)					      \
+		: [old] "i" (oldfunc), [new1] "i" (newfunc1),		      \
+		  [new2] "i" (newfunc2), ## input);			      \
+}
 
 /*
  * use this macro(s) if you need more than one output parameter
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 1243577..f5aaf6c 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -650,8 +650,8 @@ static inline void entering_ack_irq(void)
 
 static inline void ipi_entering_ack_irq(void)
 {
-	ack_APIC_irq();
 	irq_enter();
+	ack_APIC_irq();
 }
 
 static inline void exiting_irq(void)
@@ -661,9 +661,8 @@ static inline void exiting_irq(void)
 
 static inline void exiting_ack_irq(void)
 {
-	irq_exit();
-	/* Ack only at the end to avoid potential reentry */
 	ack_APIC_irq();
+	irq_exit();
 }
 
 extern void ioapic_zap_locks(void);
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index 61518cf..872877d 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -4,7 +4,6 @@
 /* Caches aren't brain-dead on the intel. */
 #include <asm-generic/cacheflush.h>
 #include <asm/special_insns.h>
-#include <asm/uaccess.h>
 
 /*
  * The set_memory_* API can be used to change various attributes of a virtual
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 9733361..97848cd 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -158,53 +158,9 @@ extern void __add_wrong_size(void)
  * value of "*ptr".
  *
  * xadd() is locked when multiple CPUs are online
- * xadd_sync() is always locked
- * xadd_local() is never locked
  */
 #define __xadd(ptr, inc, lock)	__xchg_op((ptr), (inc), xadd, lock)
 #define xadd(ptr, inc)		__xadd((ptr), (inc), LOCK_PREFIX)
-#define xadd_sync(ptr, inc)	__xadd((ptr), (inc), "lock; ")
-#define xadd_local(ptr, inc)	__xadd((ptr), (inc), "")
-
-#define __add(ptr, inc, lock)						\
-	({								\
-	        __typeof__ (*(ptr)) __ret = (inc);			\
-		switch (sizeof(*(ptr))) {				\
-		case __X86_CASE_B:					\
-			asm volatile (lock "addb %b1, %0\n"		\
-				      : "+m" (*(ptr)) : "qi" (inc)	\
-				      : "memory", "cc");		\
-			break;						\
-		case __X86_CASE_W:					\
-			asm volatile (lock "addw %w1, %0\n"		\
-				      : "+m" (*(ptr)) : "ri" (inc)	\
-				      : "memory", "cc");		\
-			break;						\
-		case __X86_CASE_L:					\
-			asm volatile (lock "addl %1, %0\n"		\
-				      : "+m" (*(ptr)) : "ri" (inc)	\
-				      : "memory", "cc");		\
-			break;						\
-		case __X86_CASE_Q:					\
-			asm volatile (lock "addq %1, %0\n"		\
-				      : "+m" (*(ptr)) : "ri" (inc)	\
-				      : "memory", "cc");		\
-			break;						\
-		default:						\
-			__add_wrong_size();				\
-		}							\
-		__ret;							\
-	})
-
-/*
- * add_*() adds "inc" to "*ptr"
- *
- * __add() takes a lock prefix
- * add_smp() is locked when multiple CPUs are online
- * add_sync() is always locked
- */
-#define add_smp(ptr, inc)	__add((ptr), (inc), LOCK_PREFIX)
-#define add_sync(ptr, inc)	__add((ptr), (inc), "lock; ")
 
 #define __cmpxchg_double(pfx, p1, p2, o1, o2, n1, n2)			\
 ({									\
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index a188061..03d269b 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -275,10 +275,10 @@ struct compat_shmid64_ds {
 #ifdef CONFIG_X86_X32_ABI
 typedef struct user_regs_struct compat_elf_gregset_t;
 
-#define PR_REG_SIZE(S) (test_thread_flag(TIF_IA32) ? 68 : 216)
-#define PRSTATUS_SIZE(S) (test_thread_flag(TIF_IA32) ? 144 : 296)
-#define SET_PR_FPVALID(S,V) \
-  do { *(int *) (((void *) &((S)->pr_reg)) + PR_REG_SIZE(0)) = (V); } \
+/* Full regset -- prstatus on x32, otherwise on ia32 */
+#define PRSTATUS_SIZE(S, R) (R != sizeof(S.pr_reg) ? 144 : 296)
+#define SET_PR_FPVALID(S, V, R) \
+  do { *(int *) (((void *) &((S)->pr_reg)) + R) = (V); } \
   while (0)
 
 #define COMPAT_USE_64BIT_TIME \
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 92a8308..1188bc8 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -106,7 +106,6 @@
 #define X86_FEATURE_APERFMPERF	( 3*32+28) /* APERFMPERF */
 #define X86_FEATURE_EAGER_FPU	( 3*32+29) /* "eagerfpu" Non lazy FPU restore */
 #define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */
-#define X86_FEATURE_MCE_RECOVERY ( 3*32+31) /* cpu has recoverable machine checks */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	( 4*32+ 0) /* "pni" SSE-3 */
diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index 4e10d73..12080d8 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -36,7 +36,7 @@ static inline void fill_ldt(struct desc_struct *desc, const struct user_desc *in
 
 extern struct desc_ptr idt_descr;
 extern gate_desc idt_table[];
-extern struct desc_ptr debug_idt_descr;
+extern const struct desc_ptr debug_idt_descr;
 extern gate_desc debug_idt_table[];
 
 struct gdt_page {
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 3ab0537..476b574 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -10,8 +10,8 @@
 #include <uapi/asm/e820.h>
 #ifndef __ASSEMBLY__
 /* see comment in arch/x86/kernel/e820.c */
-extern struct e820map e820;
-extern struct e820map e820_saved;
+extern struct e820map *e820;
+extern struct e820map *e820_saved;
 
 extern unsigned long pci_mem_start;
 extern int e820_any_mapped(u64 start, u64 end, unsigned type);
@@ -53,6 +53,8 @@ extern void e820_reserve_resources_late(void);
 extern void setup_memory_map(void);
 extern char *default_machine_specific_memory_setup(void);
 
+extern void e820_reallocate_tables(void);
+
 /*
  * Returns true iff the specified range [s,e) is completely contained inside
  * the ISA region.
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index d0bb76d..389d700 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -117,7 +117,6 @@ extern int __init efi_memblock_x86_reserve_range(void);
 extern pgd_t * __init efi_call_phys_prolog(void);
 extern void __init efi_call_phys_epilog(pgd_t *save_pgd);
 extern void __init efi_print_memmap(void);
-extern void __init efi_unmap_memmap(void);
 extern void __init efi_memory_uc(u64 addr, unsigned long size);
 extern void __init efi_map_region(efi_memory_desc_t *md);
 extern void __init efi_map_region_fixed(efi_memory_desc_t *md);
@@ -192,14 +191,7 @@ static inline efi_status_t efi_thunk_set_virtual_address_map(
 struct efi_config {
 	u64 image_handle;
 	u64 table;
-	u64 allocate_pool;
-	u64 allocate_pages;
-	u64 get_memory_map;
-	u64 free_pool;
-	u64 free_pages;
-	u64 locate_handle;
-	u64 handle_protocol;
-	u64 exit_boot_services;
+	u64 boot_services;
 	u64 text_output;
 	efi_status_t (*call)(unsigned long, ...);
 	bool is64;
@@ -207,14 +199,27 @@ struct efi_config {
 
 __pure const struct efi_config *__efi_early(void);
 
+static inline bool efi_is_64bit(void)
+{
+	if (!IS_ENABLED(CONFIG_X86_64))
+		return false;
+
+	if (!IS_ENABLED(CONFIG_EFI_MIXED))
+		return true;
+
+	return __efi_early()->is64;
+}
+
 #define efi_call_early(f, ...)						\
-	__efi_early()->call(__efi_early()->f, __VA_ARGS__);
+	__efi_early()->call(efi_is_64bit() ?				\
+		((efi_boot_services_64_t *)(unsigned long)		\
+			__efi_early()->boot_services)->f :		\
+		((efi_boot_services_32_t *)(unsigned long)		\
+			__efi_early()->boot_services)->f, __VA_ARGS__)
 
 #define __efi_call_early(f, ...)					\
 	__efi_early()->call((unsigned long)f, __VA_ARGS__);
 
-#define efi_is_64bit()		__efi_early()->is64
-
 extern bool efi_reboot_required(void);
 
 #else
diff --git a/arch/x86/include/asm/extable.h b/arch/x86/include/asm/extable.h
new file mode 100644
index 0000000..b8ad261
--- /dev/null
+++ b/arch/x86/include/asm/extable.h
@@ -0,0 +1,35 @@
+#ifndef _ASM_X86_EXTABLE_H
+#define _ASM_X86_EXTABLE_H
+/*
+ * The exception table consists of triples of addresses relative to the
+ * exception table entry itself. The first address is of an instruction
+ * that is allowed to fault, the second is the target at which the program
+ * should continue. The third is a handler function to deal with the fault
+ * caused by the instruction in the first field.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	int insn, fixup, handler;
+};
+struct pt_regs;
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)			\
+	do {							\
+		(a)->fixup = (b)->fixup + (delta);		\
+		(b)->fixup = (tmp).fixup - (delta);		\
+		(a)->handler = (b)->handler + (delta);		\
+		(b)->handler = (tmp).handler - (delta);		\
+	} while (0)
+
+extern int fixup_exception(struct pt_regs *regs, int trapnr);
+extern bool ex_has_fault_handler(unsigned long ip);
+extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
+
+#endif
diff --git a/arch/x86/include/asm/fpu/signal.h b/arch/x86/include/asm/fpu/signal.h
index 0e970d0..20a1fbf 100644
--- a/arch/x86/include/asm/fpu/signal.h
+++ b/arch/x86/include/asm/fpu/signal.h
@@ -19,6 +19,12 @@ int ia32_setup_frame(int sig, struct ksignal *ksig,
 # define ia32_setup_rt_frame	__setup_rt_frame
 #endif
 
+#ifdef CONFIG_COMPAT
+int __copy_siginfo_to_user32(compat_siginfo_t __user *to,
+		const siginfo_t *from, bool x32_ABI);
+#endif
+
+
 extern void convert_from_fxsr(struct user_i387_ia32_struct *env,
 			      struct task_struct *tsk);
 extern void convert_to_fxsr(struct task_struct *tsk,
diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index ae55a43..430bacf 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -27,11 +27,12 @@
 				 XFEATURE_MASK_YMM | \
 				 XFEATURE_MASK_OPMASK | \
 				 XFEATURE_MASK_ZMM_Hi256 | \
-				 XFEATURE_MASK_Hi16_ZMM	 | \
-				 XFEATURE_MASK_PKRU)
+				 XFEATURE_MASK_Hi16_ZMM)
 
 /* Supported features which require eager state saving */
-#define XFEATURE_MASK_EAGER	(XFEATURE_MASK_BNDREGS | XFEATURE_MASK_BNDCSR)
+#define XFEATURE_MASK_EAGER	(XFEATURE_MASK_BNDREGS | \
+				 XFEATURE_MASK_BNDCSR | \
+				 XFEATURE_MASK_PKRU)
 
 /* All currently supported features */
 #define XCNTXT_MASK	(XFEATURE_MASK_LAZY | XFEATURE_MASK_EAGER)
@@ -45,7 +46,8 @@
 extern u64 xfeatures_mask;
 extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 
-extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask);
+extern void __init update_regset_xstate_info(unsigned int size,
+					     u64 xstate_mask);
 
 void fpu__xstate_clear_all_cpu_caps(void);
 void *get_xsave_addr(struct xregs_state *xsave, int xstate);
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index a4820d4..eccd0ac 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -6,6 +6,7 @@
 # define MCOUNT_ADDR		((unsigned long)(__fentry__))
 #else
 # define MCOUNT_ADDR		((unsigned long)(mcount))
+# define HAVE_FUNCTION_GRAPH_FP_TEST
 #endif
 #define MCOUNT_INSN_SIZE	5 /* sizeof mcount call */
 
@@ -13,6 +14,8 @@
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #endif
 
+#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
+
 #ifndef __ASSEMBLY__
 extern void mcount(void);
 extern atomic_t modifying_ftrace_code;
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index 055ea99..67942b6 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -43,6 +43,9 @@ struct hypervisor_x86 {
 
 	/* X2APIC detection (run once per boot) */
 	bool		(*x2apic_available)(void);
+
+	/* pin current vcpu to specified physical cpu (run rarely) */
+	void		(*pin_vcpu)(int);
 };
 
 extern const struct hypervisor_x86 *x86_hyper;
@@ -56,6 +59,7 @@ extern const struct hypervisor_x86 x86_hyper_kvm;
 extern void init_hypervisor(struct cpuinfo_x86 *c);
 extern void init_hypervisor_platform(void);
 extern bool hypervisor_x2apic_available(void);
+extern void hypervisor_pin_vcpu(int cpu);
 #else
 static inline void init_hypervisor(struct cpuinfo_x86 *c) { }
 static inline void init_hypervisor_platform(void) { }
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 6277194..9ae5ab8 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -56,8 +56,8 @@
 #define INTEL_FAM6_ATOM_SILVERMONT1	0x37 /* BayTrail/BYT / Valleyview */
 #define INTEL_FAM6_ATOM_SILVERMONT2	0x4D /* Avaton/Rangely */
 #define INTEL_FAM6_ATOM_AIRMONT		0x4C /* CherryTrail / Braswell */
-#define INTEL_FAM6_ATOM_MERRIFIELD1	0x4A /* Tangier */
-#define INTEL_FAM6_ATOM_MERRIFIELD2	0x5A /* Annidale */
+#define INTEL_FAM6_ATOM_MERRIFIELD	0x4A /* Tangier */
+#define INTEL_FAM6_ATOM_MOOREFIELD	0x5A /* Annidale */
 #define INTEL_FAM6_ATOM_GOLDMONT	0x5C
 #define INTEL_FAM6_ATOM_DENVERTON	0x5F /* Goldmont Microserver */
 
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index 9d6b097..5b6753d 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -18,6 +18,8 @@
 extern int intel_mid_pci_init(void);
 extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
 
+extern void intel_mid_pwr_power_off(void);
+
 #define INTEL_MID_PWR_LSS_OFFSET	4
 #define INTEL_MID_PWR_LSS_TYPE		(1 << 7)
 
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 925b605..4fb1d0a 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -3,6 +3,8 @@
 
 #include <linux/notifier.h>
 
+#define IPCMSG_COLD_OFF		0x80	/* Only for Tangier */
+
 #define IPCMSG_WARM_RESET	0xF0
 #define IPCMSG_COLD_RESET	0xF1
 #define IPCMSG_SOFT_RESET	0xF2
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index e7de5c9..16d3fa2 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -50,8 +50,9 @@ extern int vector_used_by_percpu_irq(unsigned int vector);
 extern void init_ISA_irqs(void);
 
 #ifdef CONFIG_X86_LOCAL_APIC
-void arch_trigger_all_cpu_backtrace(bool);
-#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
+void arch_trigger_cpumask_backtrace(const struct cpumask *mask,
+				    bool exclude_self);
+#define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
 #endif
 
 #endif /* _ASM_X86_IRQ_H */
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index b77f5ed..ac7692d 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -4,6 +4,10 @@
 #include <asm/processor-flags.h>
 
 #ifndef __ASSEMBLY__
+
+/* Provide __cpuidle; we can't safely include <linux/cpu.h> */
+#define __cpuidle __attribute__((__section__(".cpuidle.text")))
+
 /*
  * Interrupt control:
  */
@@ -44,12 +48,12 @@ static inline void native_irq_enable(void)
 	asm volatile("sti": : :"memory");
 }
 
-static inline void native_safe_halt(void)
+static inline __cpuidle void native_safe_halt(void)
 {
 	asm volatile("sti; hlt": : :"memory");
 }
 
-static inline void native_halt(void)
+static inline __cpuidle void native_halt(void)
 {
 	asm volatile("hlt": : :"memory");
 }
@@ -86,7 +90,7 @@ static inline notrace void arch_local_irq_enable(void)
  * Used in the idle loop; sti takes one instruction cycle
  * to complete:
  */
-static inline void arch_safe_halt(void)
+static inline __cpuidle void arch_safe_halt(void)
 {
 	native_safe_halt();
 }
@@ -95,7 +99,7 @@ static inline void arch_safe_halt(void)
  * Used when interrupts are already enabled or to
  * shutdown the processor:
  */
-static inline void halt(void)
+static inline __cpuidle void halt(void)
 {
 	native_halt();
 }
diff --git a/arch/x86/include/asm/kaslr.h b/arch/x86/include/asm/kaslr.h
index 2674ee3..1052a79 100644
--- a/arch/x86/include/asm/kaslr.h
+++ b/arch/x86/include/asm/kaslr.h
@@ -6,6 +6,7 @@ unsigned long kaslr_get_random_long(const char *purpose);
 #ifdef CONFIG_RANDOMIZE_MEMORY
 extern unsigned long page_offset_base;
 extern unsigned long vmalloc_base;
+extern unsigned long vmemmap_base;
 
 void kernel_randomize_memory(void);
 #else
diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h
index 1ef9d58..d318811 100644
--- a/arch/x86/include/asm/kdebug.h
+++ b/arch/x86/include/asm/kdebug.h
@@ -24,8 +24,6 @@ enum die_val {
 extern void printk_address(unsigned long address);
 extern void die(const char *, struct pt_regs *,long);
 extern int __must_check __die(const char *, struct pt_regs *, long);
-extern void show_trace(struct task_struct *t, struct pt_regs *regs,
-		       unsigned long *sp, unsigned long bp);
 extern void show_stack_regs(struct pt_regs *regs);
 extern void __show_regs(struct pt_regs *regs, int all);
 extern unsigned long oops_begin(void);
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index d2434c1..282630e 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -210,6 +210,7 @@ struct kexec_entry64_regs {
 
 typedef void crash_vmclear_fn(void);
 extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss;
+extern void kdump_nmi_shootdown_cpus(void);
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 33ae3a4..4b20f73 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -568,6 +568,7 @@ struct kvm_vcpu_arch {
 		struct kvm_steal_time steal;
 	} st;
 
+	u64 tsc_offset;
 	u64 last_guest_tsc;
 	u64 last_host_tsc;
 	u64 tsc_offset_adjustment;
@@ -701,6 +702,8 @@ struct kvm_hv {
 	/* Hyper-v based guest crash (NT kernel bugcheck) parameters */
 	u64 hv_crash_param[HV_X64_MSR_CRASH_PARAMS];
 	u64 hv_crash_ctl;
+
+	HV_REFERENCE_TSC_PAGE tsc_ref;
 };
 
 struct kvm_arch {
@@ -781,54 +784,56 @@ struct kvm_arch {
 	bool disabled_lapic_found;
 
 	/* Struct members for AVIC */
+	u32 avic_vm_id;
 	u32 ldr_mode;
 	struct page *avic_logical_id_table_page;
 	struct page *avic_physical_id_table_page;
+	struct hlist_node hnode;
 
 	bool x2apic_format;
 	bool x2apic_broadcast_quirk_disabled;
 };
 
 struct kvm_vm_stat {
-	u32 mmu_shadow_zapped;
-	u32 mmu_pte_write;
-	u32 mmu_pte_updated;
-	u32 mmu_pde_zapped;
-	u32 mmu_flooded;
-	u32 mmu_recycled;
-	u32 mmu_cache_miss;
-	u32 mmu_unsync;
-	u32 remote_tlb_flush;
-	u32 lpages;
+	ulong mmu_shadow_zapped;
+	ulong mmu_pte_write;
+	ulong mmu_pte_updated;
+	ulong mmu_pde_zapped;
+	ulong mmu_flooded;
+	ulong mmu_recycled;
+	ulong mmu_cache_miss;
+	ulong mmu_unsync;
+	ulong remote_tlb_flush;
+	ulong lpages;
 };
 
 struct kvm_vcpu_stat {
-	u32 pf_fixed;
-	u32 pf_guest;
-	u32 tlb_flush;
-	u32 invlpg;
-
-	u32 exits;
-	u32 io_exits;
-	u32 mmio_exits;
-	u32 signal_exits;
-	u32 irq_window_exits;
-	u32 nmi_window_exits;
-	u32 halt_exits;
-	u32 halt_successful_poll;
-	u32 halt_attempted_poll;
-	u32 halt_poll_invalid;
-	u32 halt_wakeup;
-	u32 request_irq_exits;
-	u32 irq_exits;
-	u32 host_state_reload;
-	u32 efer_reload;
-	u32 fpu_reload;
-	u32 insn_emulation;
-	u32 insn_emulation_fail;
-	u32 hypercalls;
-	u32 irq_injections;
-	u32 nmi_injections;
+	u64 pf_fixed;
+	u64 pf_guest;
+	u64 tlb_flush;
+	u64 invlpg;
+
+	u64 exits;
+	u64 io_exits;
+	u64 mmio_exits;
+	u64 signal_exits;
+	u64 irq_window_exits;
+	u64 nmi_window_exits;
+	u64 halt_exits;
+	u64 halt_successful_poll;
+	u64 halt_attempted_poll;
+	u64 halt_poll_invalid;
+	u64 halt_wakeup;
+	u64 request_irq_exits;
+	u64 irq_exits;
+	u64 host_state_reload;
+	u64 efer_reload;
+	u64 fpu_reload;
+	u64 insn_emulation;
+	u64 insn_emulation_fail;
+	u64 hypercalls;
+	u64 irq_injections;
+	u64 nmi_injections;
 };
 
 struct x86_instruction_info;
@@ -951,7 +956,6 @@ struct kvm_x86_ops {
 
 	bool (*has_wbinvd_exit)(void);
 
-	u64 (*read_tsc_offset)(struct kvm_vcpu *vcpu);
 	void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset);
 
 	u64 (*read_l1_tsc)(struct kvm_vcpu *vcpu, u64 host_tsc);
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 8bf766e..9bd7ff5 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -40,9 +40,10 @@
 #define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
 
 /* AMD-specific bits */
+#define MCI_STATUS_TCC		(1ULL<<55)  /* Task context corrupt */
+#define MCI_STATUS_SYNDV	(1ULL<<53)  /* synd reg. valid */
 #define MCI_STATUS_DEFERRED	(1ULL<<44)  /* uncorrected error, deferred exception */
 #define MCI_STATUS_POISON	(1ULL<<43)  /* access poisonous data */
-#define MCI_STATUS_TCC		(1ULL<<55)  /* Task context corrupt */
 
 /*
  * McaX field if set indicates a given bank supports MCA extensions:
@@ -110,6 +111,7 @@
 #define MSR_AMD64_SMCA_MC0_MISC0	0xc0002003
 #define MSR_AMD64_SMCA_MC0_CONFIG	0xc0002004
 #define MSR_AMD64_SMCA_MC0_IPID		0xc0002005
+#define MSR_AMD64_SMCA_MC0_SYND		0xc0002006
 #define MSR_AMD64_SMCA_MC0_DESTAT	0xc0002008
 #define MSR_AMD64_SMCA_MC0_DEADDR	0xc0002009
 #define MSR_AMD64_SMCA_MC0_MISC1	0xc000200a
@@ -119,6 +121,7 @@
 #define MSR_AMD64_SMCA_MCx_MISC(x)	(MSR_AMD64_SMCA_MC0_MISC0 + 0x10*(x))
 #define MSR_AMD64_SMCA_MCx_CONFIG(x)	(MSR_AMD64_SMCA_MC0_CONFIG + 0x10*(x))
 #define MSR_AMD64_SMCA_MCx_IPID(x)	(MSR_AMD64_SMCA_MC0_IPID + 0x10*(x))
+#define MSR_AMD64_SMCA_MCx_SYND(x)	(MSR_AMD64_SMCA_MC0_SYND + 0x10*(x))
 #define MSR_AMD64_SMCA_MCx_DESTAT(x)	(MSR_AMD64_SMCA_MC0_DESTAT + 0x10*(x))
 #define MSR_AMD64_SMCA_MCx_DEADDR(x)	(MSR_AMD64_SMCA_MC0_DEADDR + 0x10*(x))
 #define MSR_AMD64_SMCA_MCx_MISCy(x, y)	((MSR_AMD64_SMCA_MC0_MISC1 + y) + (0x10*(x)))
@@ -334,44 +337,47 @@ extern void apei_mce_report_mem_error(int corrected,
  * Scalable MCA.
  */
 #ifdef CONFIG_X86_MCE_AMD
-enum amd_ip_types {
-	SMCA_F17H_CORE = 0,	/* Core errors */
-	SMCA_DF,		/* Data Fabric */
-	SMCA_UMC,		/* Unified Memory Controller */
-	SMCA_PB,		/* Parameter Block */
-	SMCA_PSP,		/* Platform Security Processor */
-	SMCA_SMU,		/* System Management Unit */
-	N_AMD_IP_TYPES
-};
-
-struct amd_hwid {
-	const char *name;
-	unsigned int hwid;
-};
-
-extern struct amd_hwid amd_hwids[N_AMD_IP_TYPES];
 
-enum amd_core_mca_blocks {
+/* These may be used by multiple smca_hwid_mcatypes */
+enum smca_bank_types {
 	SMCA_LS = 0,	/* Load Store */
 	SMCA_IF,	/* Instruction Fetch */
-	SMCA_L2_CACHE,	/* L2 cache */
-	SMCA_DE,	/* Decoder unit */
-	RES,		/* Reserved */
-	SMCA_EX,	/* Execution unit */
+	SMCA_L2_CACHE,	/* L2 Cache */
+	SMCA_DE,	/* Decoder Unit */
+	SMCA_EX,	/* Execution Unit */
 	SMCA_FP,	/* Floating Point */
-	SMCA_L3_CACHE,	/* L3 cache */
-	N_CORE_MCA_BLOCKS
+	SMCA_L3_CACHE,	/* L3 Cache */
+	SMCA_CS,	/* Coherent Slave */
+	SMCA_PIE,	/* Power, Interrupts, etc. */
+	SMCA_UMC,	/* Unified Memory Controller */
+	SMCA_PB,	/* Parameter Block */
+	SMCA_PSP,	/* Platform Security Processor */
+	SMCA_SMU,	/* System Management Unit */
+	N_SMCA_BANK_TYPES
 };
 
-extern const char * const amd_core_mcablock_names[N_CORE_MCA_BLOCKS];
+struct smca_bank_name {
+	const char *name;	/* Short name for sysfs */
+	const char *long_name;	/* Long name for pretty-printing */
+};
+
+extern struct smca_bank_name smca_bank_names[N_SMCA_BANK_TYPES];
+
+#define HWID_MCATYPE(hwid, mcatype) ((hwid << 16) | mcatype)
 
-enum amd_df_mca_blocks {
-	SMCA_CS = 0,	/* Coherent Slave */
-	SMCA_PIE,	/* Power management, Interrupts, etc */
-	N_DF_BLOCKS
+struct smca_hwid_mcatype {
+	unsigned int bank_type;	/* Use with smca_bank_types for easy indexing. */
+	u32 hwid_mcatype;	/* (hwid,mcatype) tuple */
+	u32 xec_bitmap;		/* Bitmap of valid ExtErrorCodes; current max is 21. */
 };
 
-extern const char * const amd_df_mcablock_names[N_DF_BLOCKS];
+struct smca_bank_info {
+	struct smca_hwid_mcatype *type;
+	u32 type_instance;
+};
+
+extern struct smca_bank_info smca_banks[MAX_NR_BANKS];
+
 #endif
 
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
index 1ea0bae..72198c6 100644
--- a/arch/x86/include/asm/mmu.h
+++ b/arch/x86/include/asm/mmu.h
@@ -23,6 +23,14 @@ typedef struct {
 	const struct vdso_image *vdso_image;	/* vdso image in use */
 
 	atomic_t perf_rdpmc_allowed;	/* nonzero if rdpmc is allowed */
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+	/*
+	 * One bit per protection key says whether userspace can
+	 * use it or not.  protected by mmap_sem.
+	 */
+	u16 pkey_allocation_map;
+	s16 execute_only_pkey;
+#endif
 } mm_context_t;
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index d8abfcf..8e0a9fe 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -4,6 +4,7 @@
 #include <asm/desc.h>
 #include <linux/atomic.h>
 #include <linux/mm_types.h>
+#include <linux/pkeys.h>
 
 #include <trace/events/tlb.h>
 
@@ -107,7 +108,16 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 static inline int init_new_context(struct task_struct *tsk,
 				   struct mm_struct *mm)
 {
+	#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+	if (cpu_feature_enabled(X86_FEATURE_OSPKE)) {
+		/* pkey 0 is the default and always allocated */
+		mm->context.pkey_allocation_map = 0x1;
+		/* -1 means unallocated or invalid */
+		mm->context.execute_only_pkey = -1;
+	}
+	#endif
 	init_new_context_ldt(tsk, mm);
+
 	return 0;
 }
 static inline void destroy_context(struct mm_struct *mm)
@@ -195,16 +205,20 @@ static inline void arch_unmap(struct mm_struct *mm, struct vm_area_struct *vma,
 		mpx_notify_unmap(mm, vma, start, end);
 }
 
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
 static inline int vma_pkey(struct vm_area_struct *vma)
 {
-	u16 pkey = 0;
-#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
 	unsigned long vma_pkey_mask = VM_PKEY_BIT0 | VM_PKEY_BIT1 |
 				      VM_PKEY_BIT2 | VM_PKEY_BIT3;
-	pkey = (vma->vm_flags & vma_pkey_mask) >> VM_PKEY_SHIFT;
-#endif
-	return pkey;
+
+	return (vma->vm_flags & vma_pkey_mask) >> VM_PKEY_SHIFT;
+}
+#else
+static inline int vma_pkey(struct vm_area_struct *vma)
+{
+	return 0;
 }
+#endif
 
 static inline bool __pkru_allows_pkey(u16 pkey, bool write)
 {
@@ -258,5 +272,4 @@ static inline bool arch_pte_access_permitted(pte_t pte, bool write)
 {
 	return __pkru_allows_pkey(pte_flags_pkey(pte_flags(pte)), write);
 }
-
 #endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index b07233b..3200704 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -6,7 +6,6 @@
 #include <asm/x86_init.h>
 #include <asm/apicdef.h>
 
-extern int apic_version[];
 extern int pic_mode;
 
 #ifdef CONFIG_X86_32
@@ -40,6 +39,7 @@ extern int mp_bus_id_to_type[MAX_MP_BUSSES];
 extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
 
 extern unsigned int boot_cpu_physical_apicid;
+extern u8 boot_cpu_apic_version;
 extern unsigned long mp_lapic_addr;
 
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -86,6 +86,7 @@ static inline void early_reserve_e820_mpc_new(void) { }
 #endif
 
 int generic_processor_info(int apicid, int version);
+int __generic_processor_info(int apicid, int version, bool enabled);
 
 #define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_LOCAL_APIC)
 
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 2970d22..ce93281 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -80,10 +80,6 @@ static inline unsigned long __read_cr4(void)
 {
 	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4);
 }
-static inline unsigned long __read_cr4_safe(void)
-{
-	return PVOP_CALL0(unsigned long, pv_cpu_ops.read_cr4_safe);
-}
 
 static inline void __write_cr4(unsigned long x)
 {
@@ -661,8 +657,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 
 #if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
-#ifdef CONFIG_QUEUED_SPINLOCKS
-
 static __always_inline void pv_queued_spin_lock_slowpath(struct qspinlock *lock,
 							u32 val)
 {
@@ -684,22 +678,6 @@ static __always_inline void pv_kick(int cpu)
 	PVOP_VCALL1(pv_lock_ops.kick, cpu);
 }
 
-#else /* !CONFIG_QUEUED_SPINLOCKS */
-
-static __always_inline void __ticket_lock_spinning(struct arch_spinlock *lock,
-							__ticket_t ticket)
-{
-	PVOP_VCALLEE2(pv_lock_ops.lock_spinning, lock, ticket);
-}
-
-static __always_inline void __ticket_unlock_kick(struct arch_spinlock *lock,
-							__ticket_t ticket)
-{
-	PVOP_VCALL2(pv_lock_ops.unlock_kick, lock, ticket);
-}
-
-#endif /* CONFIG_QUEUED_SPINLOCKS */
-
 #endif /* SMP && PARAVIRT_SPINLOCKS */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 7fa9e77..0f400c0 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -108,7 +108,6 @@ struct pv_cpu_ops {
 	unsigned long (*read_cr0)(void);
 	void (*write_cr0)(unsigned long);
 
-	unsigned long (*read_cr4_safe)(void);
 	unsigned long (*read_cr4)(void);
 	void (*write_cr4)(unsigned long);
 
@@ -301,23 +300,16 @@ struct pv_mmu_ops {
 struct arch_spinlock;
 #ifdef CONFIG_SMP
 #include <asm/spinlock_types.h>
-#else
-typedef u16 __ticket_t;
 #endif
 
 struct qspinlock;
 
 struct pv_lock_ops {
-#ifdef CONFIG_QUEUED_SPINLOCKS
 	void (*queued_spin_lock_slowpath)(struct qspinlock *lock, u32 val);
 	struct paravirt_callee_save queued_spin_unlock;
 
 	void (*wait)(u8 *ptr, u8 val);
 	void (*kick)(int cpu);
-#else /* !CONFIG_QUEUED_SPINLOCKS */
-	struct paravirt_callee_save lock_spinning;
-	void (*unlock_kick)(struct arch_spinlock *lock, __ticket_t ticket);
-#endif /* !CONFIG_QUEUED_SPINLOCKS */
 };
 
 /* This contains all the paravirt structures: we get a convenient
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 9ab7507..1411dbe 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -23,6 +23,9 @@ struct pci_sysdata {
 #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
 	void		*fwnode;	/* IRQ domain for MSI assignment */
 #endif
+#if IS_ENABLED(CONFIG_VMD)
+	bool vmd_domain;		/* True if in Intel VMD domain */
+#endif
 };
 
 extern int pci_routeirq;
@@ -56,6 +59,17 @@ static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
 #define pci_root_bus_fwnode	_pci_root_bus_fwnode
 #endif
 
+static inline bool is_vmd(struct pci_bus *bus)
+{
+#if IS_ENABLED(CONFIG_VMD)
+	struct pci_sysdata *sd = bus->sysdata;
+
+	return sd->vmd_domain;
+#else
+	return false;
+#endif
+}
+
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
    or architectures with incomplete PCI setup by the loader */
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 6fdef9e..3a26420 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -57,11 +57,13 @@ typedef struct { pteval_t pte; } pte_t;
 #define MAXMEM		_AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
 #define VMALLOC_SIZE_TB	_AC(32, UL)
 #define __VMALLOC_BASE	_AC(0xffffc90000000000, UL)
-#define VMEMMAP_START	_AC(0xffffea0000000000, UL)
+#define __VMEMMAP_BASE	_AC(0xffffea0000000000, UL)
 #ifdef CONFIG_RANDOMIZE_MEMORY
 #define VMALLOC_START	vmalloc_base
+#define VMEMMAP_START	vmemmap_base
 #else
 #define VMALLOC_START	__VMALLOC_BASE
+#define VMEMMAP_START	__VMEMMAP_BASE
 #endif /* CONFIG_RANDOMIZE_MEMORY */
 #define VMALLOC_END	(VMALLOC_START + _AC((VMALLOC_SIZE_TB << 40) - 1, UL))
 #define MODULES_VADDR    (__START_KERNEL_map + KERNEL_IMAGE_SIZE)
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index f1218f5..8b4de22 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -439,8 +439,6 @@ extern pgprot_t pgprot_writethrough(pgprot_t prot);
 struct file;
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
                               unsigned long size, pgprot_t vma_prot);
-int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
-                              unsigned long size, pgprot_t *vma_prot);
 
 /* Install a pte for a particular vaddr in kernel space. */
 void set_pte_vaddr(unsigned long vaddr, pte_t pte);
diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h
index 7b84565..34684ad 100644
--- a/arch/x86/include/asm/pkeys.h
+++ b/arch/x86/include/asm/pkeys.h
@@ -10,7 +10,6 @@ extern int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
  * Try to dedicate one of the protection keys to be used as an
  * execute-only protection key.
  */
-#define PKEY_DEDICATED_EXECUTE_ONLY 15
 extern int __execute_only_pkey(struct mm_struct *mm);
 static inline int execute_only_pkey(struct mm_struct *mm)
 {
@@ -31,4 +30,76 @@ static inline int arch_override_mprotect_pkey(struct vm_area_struct *vma,
 	return __arch_override_mprotect_pkey(vma, prot, pkey);
 }
 
+extern int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+		unsigned long init_val);
+
+#define ARCH_VM_PKEY_FLAGS (VM_PKEY_BIT0 | VM_PKEY_BIT1 | VM_PKEY_BIT2 | VM_PKEY_BIT3)
+
+#define mm_pkey_allocation_map(mm)	(mm->context.pkey_allocation_map)
+#define mm_set_pkey_allocated(mm, pkey) do {		\
+	mm_pkey_allocation_map(mm) |= (1U << pkey);	\
+} while (0)
+#define mm_set_pkey_free(mm, pkey) do {			\
+	mm_pkey_allocation_map(mm) &= ~(1U << pkey);	\
+} while (0)
+
+static inline
+bool mm_pkey_is_allocated(struct mm_struct *mm, int pkey)
+{
+	return mm_pkey_allocation_map(mm) & (1U << pkey);
+}
+
+/*
+ * Returns a positive, 4-bit key on success, or -1 on failure.
+ */
+static inline
+int mm_pkey_alloc(struct mm_struct *mm)
+{
+	/*
+	 * Note: this is the one and only place we make sure
+	 * that the pkey is valid as far as the hardware is
+	 * concerned.  The rest of the kernel trusts that
+	 * only good, valid pkeys come out of here.
+	 */
+	u16 all_pkeys_mask = ((1U << arch_max_pkey()) - 1);
+	int ret;
+
+	/*
+	 * Are we out of pkeys?  We must handle this specially
+	 * because ffz() behavior is undefined if there are no
+	 * zeros.
+	 */
+	if (mm_pkey_allocation_map(mm) == all_pkeys_mask)
+		return -1;
+
+	ret = ffz(mm_pkey_allocation_map(mm));
+
+	mm_set_pkey_allocated(mm, ret);
+
+	return ret;
+}
+
+static inline
+int mm_pkey_free(struct mm_struct *mm, int pkey)
+{
+	/*
+	 * pkey 0 is special, always allocated and can never
+	 * be freed.
+	 */
+	if (!pkey)
+		return -EINVAL;
+	if (!mm_pkey_is_allocated(mm, pkey))
+		return -EINVAL;
+
+	mm_set_pkey_free(mm, pkey);
+
+	return 0;
+}
+
+extern int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+		unsigned long init_val);
+extern int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+		unsigned long init_val);
+extern void copy_init_pkru_to_fpregs(void);
+
 #endif /*_ASM_X86_PKEYS_H */
diff --git a/arch/x86/include/asm/pmem.h b/arch/x86/include/asm/pmem.h
index 643eba4..2c1ebeb 100644
--- a/arch/x86/include/asm/pmem.h
+++ b/arch/x86/include/asm/pmem.h
@@ -46,10 +46,7 @@ static inline void arch_memcpy_to_pmem(void *dst, const void *src, size_t n)
 
 static inline int arch_memcpy_from_pmem(void *dst, const void *src, size_t n)
 {
-	if (static_cpu_has(X86_FEATURE_MCE_RECOVERY))
-		return memcpy_mcsafe(dst, src, n);
-	memcpy(dst, src, n);
-	return 0;
+	return memcpy_mcsafe(dst, src, n);
 }
 
 /**
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 63def95..984a7bf 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -389,9 +389,9 @@ struct thread_struct {
 	unsigned short		fsindex;
 	unsigned short		gsindex;
 #endif
-#ifdef CONFIG_X86_32
-	unsigned long		ip;
-#endif
+
+	u32			status;		/* thread synchronous flags */
+
 #ifdef CONFIG_X86_64
 	unsigned long		fsbase;
 	unsigned long		gsbase;
@@ -438,6 +438,15 @@ struct thread_struct {
 };
 
 /*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
+
+/*
  * Set IOPL bits in EFLAGS from given mask
  */
 static inline void native_set_iopl_mask(unsigned mask)
@@ -724,8 +733,6 @@ static inline void spin_lock_prefetch(const void *x)
 	.addr_limit		= KERNEL_DS,				  \
 }
 
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
 /*
  * TOP_OF_KERNEL_STACK_PADDING reserves 8 bytes on top of the ring0 stack.
  * This is necessary to guarantee that the entire "struct pt_regs"
@@ -776,17 +783,13 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 	.addr_limit		= KERNEL_DS,			\
 }
 
-/*
- * Return saved PC of a blocked thread.
- * What is this good for? it will be always the scheduler or ret_from_fork.
- */
-#define thread_saved_pc(t)	READ_ONCE_NOCHECK(*(unsigned long *)((t)->thread.sp - 8))
-
 #define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.sp0 - 1)
 extern unsigned long KSTK_ESP(struct task_struct *task);
 
 #endif /* CONFIG_X86_64 */
 
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
 extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
 					       unsigned long new_sp);
 
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index d019f0c..3ad741b 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -87,9 +87,10 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift)
 }
 
 static __always_inline
-cycle_t __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src)
+cycle_t __pvclock_read_cycles(const struct pvclock_vcpu_time_info *src,
+			      u64 tsc)
 {
-	u64 delta = rdtsc_ordered() - src->tsc_timestamp;
+	u64 delta = tsc - src->tsc_timestamp;
 	cycle_t offset = pvclock_scale_delta(delta, src->tsc_to_system_mul,
 					     src->tsc_shift);
 	return src->system_time + offset;
diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h
index b2988c0..230e190 100644
--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -44,9 +44,9 @@ struct trampoline_header {
 extern struct real_mode_header *real_mode_header;
 extern unsigned char real_mode_blob_end[];
 
-extern unsigned long init_rsp;
 extern unsigned long initial_code;
 extern unsigned long initial_gs;
+extern unsigned long initial_stack;
 
 extern unsigned char real_mode_blob[];
 extern unsigned char real_mode_relocs[];
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index 8dbc762..3d33a71 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -154,7 +154,7 @@ static inline bool __down_write_trylock(struct rw_semaphore *sem)
 		     : "+m" (sem->count), "=&a" (tmp0), "=&r" (tmp1),
 		       CC_OUT(e) (result)
 		     : "er" (RWSEM_ACTIVE_WRITE_BIAS)
-		     : "memory", "cc");
+		     : "memory");
 	return result;
 }
 
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 13b6cdd..2f75f30 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -2,7 +2,7 @@
 #define _ASM_X86_SECTIONS_H
 
 #include <asm-generic/sections.h>
-#include <asm/uaccess.h>
+#include <asm/extable.h>
 
 extern char __brk_base[], __brk_limit[];
 extern struct exception_table_entry __stop___ex_table[];
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
index dd1e7d6..8af22be 100644
--- a/arch/x86/include/asm/signal.h
+++ b/arch/x86/include/asm/signal.h
@@ -23,6 +23,10 @@ typedef struct {
 	unsigned long sig[_NSIG_WORDS];
 } sigset_t;
 
+/* non-uapi in-kernel SA_FLAGS for those indicates ABI for a signal frame */
+#define SA_IA32_ABI	0x02000000u
+#define SA_X32_ABI	0x01000000u
+
 #ifndef CONFIG_COMPAT
 typedef sigset_t compat_sigset_t;
 #endif
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index ebd0c16..026ea82 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -39,9 +39,6 @@ DECLARE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_bios_cpu_apicid);
 DECLARE_EARLY_PER_CPU_READ_MOSTLY(int, x86_cpu_to_logical_apicid);
 #endif
 
-/* Static state in head.S used to set up a CPU */
-extern unsigned long stack_start; /* Initial stack pointer address */
-
 struct task_struct;
 
 struct smp_ops {
@@ -50,6 +47,7 @@ struct smp_ops {
 	void (*smp_cpus_done)(unsigned max_cpus);
 
 	void (*stop_other_cpus)(int wait);
+	void (*crash_stop_other_cpus)(void);
 	void (*smp_send_reschedule)(int cpu);
 
 	int (*cpu_up)(unsigned cpu, struct task_struct *tidle);
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 587d791..19a2224 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -59,22 +59,19 @@ static inline void native_write_cr3(unsigned long val)
 static inline unsigned long native_read_cr4(void)
 {
 	unsigned long val;
-	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
-	return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
-	unsigned long val;
-	/* This could fault if %cr4 does not exist. In x86_64, a cr4 always
-	 * exists, so it will never fail. */
 #ifdef CONFIG_X86_32
+	/*
+	 * This could fault if CR4 does not exist.  Non-existent CR4
+	 * is functionally equivalent to CR4 == 0.  Keep it simple and pretend
+	 * that CR4 == 0 on CPUs that don't have CR4.
+	 */
 	asm volatile("1: mov %%cr4, %0\n"
 		     "2:\n"
 		     _ASM_EXTABLE(1b, 2b)
 		     : "=r" (val), "=m" (__force_order) : "0" (0));
 #else
-	val = native_read_cr4();
+	/* CR4 always exists on x86_64. */
+	asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
 #endif
 	return val;
 }
@@ -182,11 +179,6 @@ static inline unsigned long __read_cr4(void)
 	return native_read_cr4();
 }
 
-static inline unsigned long __read_cr4_safe(void)
-{
-	return native_read_cr4_safe();
-}
-
 static inline void __write_cr4(unsigned long x)
 {
 	native_write_cr4(x);
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index be0a059..921bea7 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -20,187 +20,13 @@
  * (the type definitions are in asm/spinlock_types.h)
  */
 
-#ifdef CONFIG_X86_32
-# define LOCK_PTR_REG "a"
-#else
-# define LOCK_PTR_REG "D"
-#endif
-
-#if defined(CONFIG_X86_32) && (defined(CONFIG_X86_PPRO_FENCE))
-/*
- * On PPro SMP, we use a locked operation to unlock
- * (PPro errata 66, 92)
- */
-# define UNLOCK_LOCK_PREFIX LOCK_PREFIX
-#else
-# define UNLOCK_LOCK_PREFIX
-#endif
-
 /* How long a lock should spin before we consider blocking */
 #define SPIN_THRESHOLD	(1 << 15)
 
 extern struct static_key paravirt_ticketlocks_enabled;
 static __always_inline bool static_key_false(struct static_key *key);
 
-#ifdef CONFIG_QUEUED_SPINLOCKS
 #include <asm/qspinlock.h>
-#else
-
-#ifdef CONFIG_PARAVIRT_SPINLOCKS
-
-static inline void __ticket_enter_slowpath(arch_spinlock_t *lock)
-{
-	set_bit(0, (volatile unsigned long *)&lock->tickets.head);
-}
-
-#else  /* !CONFIG_PARAVIRT_SPINLOCKS */
-static __always_inline void __ticket_lock_spinning(arch_spinlock_t *lock,
-							__ticket_t ticket)
-{
-}
-static inline void __ticket_unlock_kick(arch_spinlock_t *lock,
-							__ticket_t ticket)
-{
-}
-
-#endif /* CONFIG_PARAVIRT_SPINLOCKS */
-static inline int  __tickets_equal(__ticket_t one, __ticket_t two)
-{
-	return !((one ^ two) & ~TICKET_SLOWPATH_FLAG);
-}
-
-static inline void __ticket_check_and_clear_slowpath(arch_spinlock_t *lock,
-							__ticket_t head)
-{
-	if (head & TICKET_SLOWPATH_FLAG) {
-		arch_spinlock_t old, new;
-
-		old.tickets.head = head;
-		new.tickets.head = head & ~TICKET_SLOWPATH_FLAG;
-		old.tickets.tail = new.tickets.head + TICKET_LOCK_INC;
-		new.tickets.tail = old.tickets.tail;
-
-		/* try to clear slowpath flag when there are no contenders */
-		cmpxchg(&lock->head_tail, old.head_tail, new.head_tail);
-	}
-}
-
-static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock)
-{
-	return __tickets_equal(lock.tickets.head, lock.tickets.tail);
-}
-
-/*
- * Ticket locks are conceptually two parts, one indicating the current head of
- * the queue, and the other indicating the current tail. The lock is acquired
- * by atomically noting the tail and incrementing it by one (thus adding
- * ourself to the queue and noting our position), then waiting until the head
- * becomes equal to the the initial value of the tail.
- *
- * We use an xadd covering *both* parts of the lock, to increment the tail and
- * also load the position of the head, which takes care of memory ordering
- * issues and should be optimal for the uncontended case. Note the tail must be
- * in the high part, because a wide xadd increment of the low part would carry
- * up and contaminate the high part.
- */
-static __always_inline void arch_spin_lock(arch_spinlock_t *lock)
-{
-	register struct __raw_tickets inc = { .tail = TICKET_LOCK_INC };
-
-	inc = xadd(&lock->tickets, inc);
-	if (likely(inc.head == inc.tail))
-		goto out;
-
-	for (;;) {
-		unsigned count = SPIN_THRESHOLD;
-
-		do {
-			inc.head = READ_ONCE(lock->tickets.head);
-			if (__tickets_equal(inc.head, inc.tail))
-				goto clear_slowpath;
-			cpu_relax();
-		} while (--count);
-		__ticket_lock_spinning(lock, inc.tail);
-	}
-clear_slowpath:
-	__ticket_check_and_clear_slowpath(lock, inc.head);
-out:
-	barrier();	/* make sure nothing creeps before the lock is taken */
-}
-
-static __always_inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
-	arch_spinlock_t old, new;
-
-	old.tickets = READ_ONCE(lock->tickets);
-	if (!__tickets_equal(old.tickets.head, old.tickets.tail))
-		return 0;
-
-	new.head_tail = old.head_tail + (TICKET_LOCK_INC << TICKET_SHIFT);
-	new.head_tail &= ~TICKET_SLOWPATH_FLAG;
-
-	/* cmpxchg is a full barrier, so nothing can move before it */
-	return cmpxchg(&lock->head_tail, old.head_tail, new.head_tail) == old.head_tail;
-}
-
-static __always_inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
-	if (TICKET_SLOWPATH_FLAG &&
-		static_key_false(&paravirt_ticketlocks_enabled)) {
-		__ticket_t head;
-
-		BUILD_BUG_ON(((__ticket_t)NR_CPUS) != NR_CPUS);
-
-		head = xadd(&lock->tickets.head, TICKET_LOCK_INC);
-
-		if (unlikely(head & TICKET_SLOWPATH_FLAG)) {
-			head &= ~TICKET_SLOWPATH_FLAG;
-			__ticket_unlock_kick(lock, (head + TICKET_LOCK_INC));
-		}
-	} else
-		__add(&lock->tickets.head, TICKET_LOCK_INC, UNLOCK_LOCK_PREFIX);
-}
-
-static inline int arch_spin_is_locked(arch_spinlock_t *lock)
-{
-	struct __raw_tickets tmp = READ_ONCE(lock->tickets);
-
-	return !__tickets_equal(tmp.tail, tmp.head);
-}
-
-static inline int arch_spin_is_contended(arch_spinlock_t *lock)
-{
-	struct __raw_tickets tmp = READ_ONCE(lock->tickets);
-
-	tmp.head &= ~TICKET_SLOWPATH_FLAG;
-	return (__ticket_t)(tmp.tail - tmp.head) > TICKET_LOCK_INC;
-}
-#define arch_spin_is_contended	arch_spin_is_contended
-
-static __always_inline void arch_spin_lock_flags(arch_spinlock_t *lock,
-						  unsigned long flags)
-{
-	arch_spin_lock(lock);
-}
-
-static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
-{
-	__ticket_t head = READ_ONCE(lock->tickets.head);
-
-	for (;;) {
-		struct __raw_tickets tmp = READ_ONCE(lock->tickets);
-		/*
-		 * We need to check "unlocked" in a loop, tmp.head == head
-		 * can be false positive because of overflow.
-		 */
-		if (__tickets_equal(tmp.head, tmp.tail) ||
-				!__tickets_equal(tmp.head, head))
-			break;
-
-		cpu_relax();
-	}
-}
-#endif /* CONFIG_QUEUED_SPINLOCKS */
 
 /*
  * Read-write spinlocks, allowing multiple readers
diff --git a/arch/x86/include/asm/spinlock_types.h b/arch/x86/include/asm/spinlock_types.h
index 65c3e37..25311eb 100644
--- a/arch/x86/include/asm/spinlock_types.h
+++ b/arch/x86/include/asm/spinlock_types.h
@@ -23,20 +23,7 @@ typedef u32 __ticketpair_t;
 
 #define TICKET_SHIFT	(sizeof(__ticket_t) * 8)
 
-#ifdef CONFIG_QUEUED_SPINLOCKS
 #include <asm-generic/qspinlock_types.h>
-#else
-typedef struct arch_spinlock {
-	union {
-		__ticketpair_t head_tail;
-		struct __raw_tickets {
-			__ticket_t head, tail;
-		} tickets;
-	};
-} arch_spinlock_t;
-
-#define __ARCH_SPIN_LOCK_UNLOCKED	{ { 0 } }
-#endif /* CONFIG_QUEUED_SPINLOCKS */
 
 #include <asm-generic/qrwlock_types.h>
 
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 0944218..37f2e0b 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -8,86 +8,86 @@
 
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
+#include <asm/switch_to.h>
+
+enum stack_type {
+	STACK_TYPE_UNKNOWN,
+	STACK_TYPE_TASK,
+	STACK_TYPE_IRQ,
+	STACK_TYPE_SOFTIRQ,
+	STACK_TYPE_EXCEPTION,
+	STACK_TYPE_EXCEPTION_LAST = STACK_TYPE_EXCEPTION + N_EXCEPTION_STACKS-1,
+};
 
-extern int kstack_depth_to_print;
-
-struct thread_info;
-struct stacktrace_ops;
-
-typedef unsigned long (*walk_stack_t)(struct task_struct *task,
-				      unsigned long *stack,
-				      unsigned long bp,
-				      const struct stacktrace_ops *ops,
-				      void *data,
-				      unsigned long *end,
-				      int *graph);
-
-extern unsigned long
-print_context_stack(struct task_struct *task,
-		    unsigned long *stack, unsigned long bp,
-		    const struct stacktrace_ops *ops, void *data,
-		    unsigned long *end, int *graph);
-
-extern unsigned long
-print_context_stack_bp(struct task_struct *task,
-		       unsigned long *stack, unsigned long bp,
-		       const struct stacktrace_ops *ops, void *data,
-		       unsigned long *end, int *graph);
-
-/* Generic stack tracer with callbacks */
-
-struct stacktrace_ops {
-	int (*address)(void *data, unsigned long address, int reliable);
-	/* On negative return stop dumping */
-	int (*stack)(void *data, char *name);
-	walk_stack_t	walk_stack;
+struct stack_info {
+	enum stack_type type;
+	unsigned long *begin, *end, *next_sp;
 };
 
-void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data);
+bool in_task_stack(unsigned long *stack, struct task_struct *task,
+		   struct stack_info *info);
+
+int get_stack_info(unsigned long *stack, struct task_struct *task,
+		   struct stack_info *info, unsigned long *visit_mask);
+
+void stack_type_str(enum stack_type type, const char **begin,
+		    const char **end);
+
+static inline bool on_stack(struct stack_info *info, void *addr, size_t len)
+{
+	void *begin = info->begin;
+	void *end   = info->end;
+
+	return (info->type != STACK_TYPE_UNKNOWN &&
+		addr >= begin && addr < end &&
+		addr + len > begin && addr + len <= end);
+}
+
+extern int kstack_depth_to_print;
 
 #ifdef CONFIG_X86_32
 #define STACKSLOTS_PER_LINE 8
-#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :)
 #else
 #define STACKSLOTS_PER_LINE 4
-#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
 #endif
 
 #ifdef CONFIG_FRAME_POINTER
-static inline unsigned long
-stack_frame(struct task_struct *task, struct pt_regs *regs)
+static inline unsigned long *
+get_frame_pointer(struct task_struct *task, struct pt_regs *regs)
 {
-	unsigned long bp;
-
 	if (regs)
-		return regs->bp;
+		return (unsigned long *)regs->bp;
 
-	if (task == current) {
-		/* Grab bp right from our regs */
-		get_bp(bp);
-		return bp;
-	}
+	if (task == current)
+		return __builtin_frame_address(0);
 
-	/* bp is the last reg pushed by switch_to */
-	return *(unsigned long *)task->thread.sp;
+	return (unsigned long *)((struct inactive_task_frame *)task->thread.sp)->bp;
 }
 #else
-static inline unsigned long
-stack_frame(struct task_struct *task, struct pt_regs *regs)
+static inline unsigned long *
+get_frame_pointer(struct task_struct *task, struct pt_regs *regs)
 {
-	return 0;
+	return NULL;
+}
+#endif /* CONFIG_FRAME_POINTER */
+
+static inline unsigned long *
+get_stack_pointer(struct task_struct *task, struct pt_regs *regs)
+{
+	if (regs)
+		return (unsigned long *)kernel_stack_pointer(regs);
+
+	if (task == current)
+		return __builtin_frame_address(0);
+
+	return (unsigned long *)task->thread.sp;
 }
-#endif
 
-extern void
-show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *stack, unsigned long bp, char *log_lvl);
+void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+			unsigned long *stack, char *log_lvl);
 
-extern void
-show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *sp, unsigned long bp, char *log_lvl);
+void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+			unsigned long *sp, char *log_lvl);
 
 extern unsigned int code_bytes;
 
@@ -106,7 +106,7 @@ static inline unsigned long caller_frame_pointer(void)
 {
 	struct stack_frame *frame;
 
-	get_bp(frame);
+	frame = __builtin_frame_address(0);
 
 #ifdef CONFIG_FRAME_POINTER
 	frame = frame->next_frame;
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
index 90dbbd9..a164862 100644
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -2,6 +2,7 @@
 #define _ASM_X86_STRING_64_H
 
 #ifdef __KERNEL__
+#include <linux/jump_label.h>
 
 /* Written 2002 by Andi Kleen */
 
@@ -78,6 +79,9 @@ int strcmp(const char *cs, const char *ct);
 #define memset(s, c, n) __memset(s, c, n)
 #endif
 
+__must_check int memcpy_mcsafe_unrolled(void *dst, const void *src, size_t cnt);
+DECLARE_STATIC_KEY_FALSE(mcsafe_key);
+
 /**
  * memcpy_mcsafe - copy memory with indication if a machine check happened
  *
@@ -86,10 +90,23 @@ int strcmp(const char *cs, const char *ct);
  * @cnt:	number of bytes to copy
  *
  * Low level memory copy function that catches machine checks
+ * We only call into the "safe" function on systems that can
+ * actually do machine check recovery. Everyone else can just
+ * use memcpy().
  *
  * Return 0 for success, -EFAULT for fail
  */
-int memcpy_mcsafe(void *dst, const void *src, size_t cnt);
+static __always_inline __must_check int
+memcpy_mcsafe(void *dst, const void *src, size_t cnt)
+{
+#ifdef CONFIG_X86_MCE
+	if (static_branch_unlikely(&mcsafe_key))
+		return memcpy_mcsafe_unrolled(dst, src, cnt);
+	else
+#endif
+		memcpy(dst, src, cnt);
+	return 0;
+}
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index 8f321a1..5cb436a 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -2,130 +2,66 @@
 #define _ASM_X86_SWITCH_TO_H
 
 struct task_struct; /* one of the stranger aspects of C forward declarations */
+
+struct task_struct *__switch_to_asm(struct task_struct *prev,
+				    struct task_struct *next);
+
 __visible struct task_struct *__switch_to(struct task_struct *prev,
-					   struct task_struct *next);
+					  struct task_struct *next);
 struct tss_struct;
 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		      struct tss_struct *tss);
 
-#ifdef CONFIG_X86_32
+/* This runs runs on the previous thread's stack. */
+static inline void prepare_switch_to(struct task_struct *prev,
+				     struct task_struct *next)
+{
+#ifdef CONFIG_VMAP_STACK
+	/*
+	 * If we switch to a stack that has a top-level paging entry
+	 * that is not present in the current mm, the resulting #PF will
+	 * will be promoted to a double-fault and we'll panic.  Probe
+	 * the new stack now so that vmalloc_fault can fix up the page
+	 * tables if needed.  This can only happen if we use a stack
+	 * in vmap space.
+	 *
+	 * We assume that the stack is aligned so that it never spans
+	 * more than one top-level paging entry.
+	 *
+	 * To minimize cache pollution, just follow the stack pointer.
+	 */
+	READ_ONCE(*(unsigned char *)next->thread.sp);
+#endif
+}
+
+asmlinkage void ret_from_fork(void);
+
+/* data that is pointed to by thread.sp */
+struct inactive_task_frame {
+#ifdef CONFIG_X86_64
+	unsigned long r15;
+	unsigned long r14;
+	unsigned long r13;
+	unsigned long r12;
+#else
+	unsigned long si;
+	unsigned long di;
+#endif
+	unsigned long bx;
+	unsigned long bp;
+	unsigned long ret_addr;
+};
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-#define __switch_canary							\
-	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
-	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
-#define __switch_canary_oparam						\
-	, [stack_canary] "=m" (stack_canary.canary)
-#define __switch_canary_iparam						\
-	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
-#else	/* CC_STACKPROTECTOR */
-#define __switch_canary
-#define __switch_canary_oparam
-#define __switch_canary_iparam
-#endif	/* CC_STACKPROTECTOR */
+struct fork_frame {
+	struct inactive_task_frame frame;
+	struct pt_regs regs;
+};
 
-/*
- * Saving eflags is important. It switches not only IOPL between tasks,
- * it also protects other tasks from NT leaking through sysenter etc.
- */
 #define switch_to(prev, next, last)					\
 do {									\
-	/*								\
-	 * Context-switching clobbers all registers, so we clobber	\
-	 * them explicitly, via unused output variables.		\
-	 * (EAX and EBP is not listed because EBP is saved/restored	\
-	 * explicitly for wchan access and EAX is the return value of	\
-	 * __switch_to())						\
-	 */								\
-	unsigned long ebx, ecx, edx, esi, edi;				\
-									\
-	asm volatile("pushl %%ebp\n\t"		/* save    EBP   */	\
-		     "movl %%esp,%[prev_sp]\n\t"	/* save    ESP   */ \
-		     "movl %[next_sp],%%esp\n\t"	/* restore ESP   */ \
-		     "movl $1f,%[prev_ip]\n\t"	/* save    EIP   */	\
-		     "pushl %[next_ip]\n\t"	/* restore EIP   */	\
-		     __switch_canary					\
-		     "jmp __switch_to\n"	/* regparm call  */	\
-		     "1:\t"						\
-		     "popl %%ebp\n\t"		/* restore EBP   */	\
-									\
-		     /* output parameters */				\
-		     : [prev_sp] "=m" (prev->thread.sp),		\
-		       [prev_ip] "=m" (prev->thread.ip),		\
-		       "=a" (last),					\
-									\
-		       /* clobbered output registers: */		\
-		       "=b" (ebx), "=c" (ecx), "=d" (edx),		\
-		       "=S" (esi), "=D" (edi)				\
-		       							\
-		       __switch_canary_oparam				\
-									\
-		       /* input parameters: */				\
-		     : [next_sp]  "m" (next->thread.sp),		\
-		       [next_ip]  "m" (next->thread.ip),		\
-		       							\
-		       /* regparm parameters for __switch_to(): */	\
-		       [prev]     "a" (prev),				\
-		       [next]     "d" (next)				\
+	prepare_switch_to(prev, next);					\
 									\
-		       __switch_canary_iparam				\
-									\
-		     : /* reloaded segment registers */			\
-			"memory");					\
+	((last) = __switch_to_asm((prev), (next)));			\
 } while (0)
 
-#else /* CONFIG_X86_32 */
-
-/* frame pointer must be last for get_wchan */
-#define SAVE_CONTEXT    "pushq %%rbp ; movq %%rsi,%%rbp\n\t"
-#define RESTORE_CONTEXT "movq %%rbp,%%rsi ; popq %%rbp\t"
-
-#define __EXTRA_CLOBBER  \
-	, "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \
-	  "r12", "r13", "r14", "r15", "flags"
-
-#ifdef CONFIG_CC_STACKPROTECTOR
-#define __switch_canary							  \
-	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
-	"movq %%r8,"__percpu_arg([gs_canary])"\n\t"
-#define __switch_canary_oparam						  \
-	, [gs_canary] "=m" (irq_stack_union.stack_canary)
-#define __switch_canary_iparam						  \
-	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
-#else	/* CC_STACKPROTECTOR */
-#define __switch_canary
-#define __switch_canary_oparam
-#define __switch_canary_iparam
-#endif	/* CC_STACKPROTECTOR */
-
-/*
- * There is no need to save or restore flags, because flags are always
- * clean in kernel mode, with the possible exception of IOPL.  Kernel IOPL
- * has no effect.
- */
-#define switch_to(prev, next, last) \
-	asm volatile(SAVE_CONTEXT					  \
-	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
-	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
-	     "call __switch_to\n\t"					  \
-	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
-	     __switch_canary						  \
-	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
-	     "movq %%rax,%%rdi\n\t" 					  \
-	     "testl  %[_tif_fork],%P[ti_flags](%%r8)\n\t"		  \
-	     "jnz   ret_from_fork\n\t"					  \
-	     RESTORE_CONTEXT						  \
-	     : "=a" (last)					  	  \
-	       __switch_canary_oparam					  \
-	     : [next] "S" (next), [prev] "D" (prev),			  \
-	       [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \
-	       [ti_flags] "i" (offsetof(struct thread_info, flags)),	  \
-	       [_tif_fork] "i" (_TIF_FORK),			  	  \
-	       [thread_info] "i" (offsetof(struct task_struct, stack)),   \
-	       [current_task] "m" (current_task)			  \
-	       __switch_canary_iparam					  \
-	     : "memory", "cc" __EXTRA_CLOBBER)
-
-#endif /* CONFIG_X86_32 */
-
 #endif /* _ASM_X86_SWITCH_TO_H */
diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
index 4e23dd1..e3c95e8 100644
--- a/arch/x86/include/asm/syscall.h
+++ b/arch/x86/include/asm/syscall.h
@@ -60,7 +60,7 @@ static inline long syscall_get_error(struct task_struct *task,
 	 * TS_COMPAT is set for 32-bit syscall entries and then
 	 * remains set until we return to user mode.
 	 */
-	if (task_thread_info(task)->status & (TS_COMPAT|TS_I386_REGS_POKED))
+	if (task->thread.status & (TS_COMPAT|TS_I386_REGS_POKED))
 		/*
 		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
 		 * and will match correctly in comparisons.
@@ -116,7 +116,7 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned long *args)
 {
 # ifdef CONFIG_IA32_EMULATION
-	if (task_thread_info(task)->status & TS_COMPAT)
+	if (task->thread.status & TS_COMPAT)
 		switch (i) {
 		case 0:
 			if (!n--) break;
@@ -177,7 +177,7 @@ static inline void syscall_set_arguments(struct task_struct *task,
 					 const unsigned long *args)
 {
 # ifdef CONFIG_IA32_EMULATION
-	if (task_thread_info(task)->status & TS_COMPAT)
+	if (task->thread.status & TS_COMPAT)
 		switch (i) {
 		case 0:
 			if (!n--) break;
@@ -234,18 +234,8 @@ static inline void syscall_set_arguments(struct task_struct *task,
 
 static inline int syscall_get_arch(void)
 {
-#ifdef CONFIG_IA32_EMULATION
-	/*
-	 * TS_COMPAT is set for 32-bit syscall entry and then
-	 * remains set until we return to user mode.
-	 *
-	 * x32 tasks should be considered AUDIT_ARCH_X86_64.
-	 */
-	if (task_thread_info(current)->status & TS_COMPAT)
-		return AUDIT_ARCH_I386;
-#endif
-	/* Both x32 and x86_64 are considered "64-bit". */
-	return AUDIT_ARCH_X86_64;
+	/* x32 tasks should be considered AUDIT_ARCH_X86_64. */
+	return in_ia32_syscall() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64;
 }
 #endif	/* CONFIG_X86_32 */
 
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 8b7c8d8..2aaca53 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -52,21 +52,6 @@ struct task_struct;
 #include <asm/cpufeature.h>
 #include <linux/atomic.h>
 
-struct thread_info {
-	struct task_struct	*task;		/* main task structure */
-	__u32			flags;		/* low level flags */
-	__u32			status;		/* thread synchronous flags */
-	__u32			cpu;		/* current CPU */
-};
-
-#define INIT_THREAD_INFO(tsk)			\
-{						\
-	.task		= &tsk,			\
-	.flags		= 0,			\
-	.cpu		= 0,			\
-}
-
-#define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
 #else /* !__ASSEMBLY__ */
@@ -95,7 +80,6 @@ struct thread_info {
 #define TIF_UPROBE		12	/* breakpointed or singlestepping */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* IA32 compatibility process */
-#define TIF_FORK		18	/* ret_from_fork */
 #define TIF_NOHZ		19	/* in adaptive nohz mode */
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
 #define TIF_POLLING_NRFLAG	21	/* idle is polling for TIF_NEED_RESCHED */
@@ -119,7 +103,6 @@ struct thread_info {
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
-#define _TIF_FORK		(1 << TIF_FORK)
 #define _TIF_NOHZ		(1 << TIF_NOHZ)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
@@ -160,11 +143,6 @@ struct thread_info {
  */
 #ifndef __ASSEMBLY__
 
-static inline struct thread_info *current_thread_info(void)
-{
-	return (struct thread_info *)(current_top_of_stack() - THREAD_SIZE);
-}
-
 static inline unsigned long current_stack_pointer(void)
 {
 	unsigned long sp;
@@ -226,60 +204,19 @@ static inline int arch_within_stack_frames(const void * const stack,
 # define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
 #endif
 
-/*
- * ASM operand which evaluates to a 'thread_info' address of
- * the current task, if it is known that "reg" is exactly "off"
- * bytes below the top of the stack currently.
- *
- * ( The kernel stack's size is known at build time, it is usually
- *   2 or 4 pages, and the bottom  of the kernel stack contains
- *   the thread_info structure. So to access the thread_info very
- *   quickly from assembly code we can calculate down from the
- *   top of the kernel stack to the bottom, using constant,
- *   build-time calculations only. )
- *
- * For example, to fetch the current thread_info->flags value into %eax
- * on x86-64 defconfig kernels, in syscall entry code where RSP is
- * currently at exactly SIZEOF_PTREGS bytes away from the top of the
- * stack:
- *
- *      mov ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS), %eax
- *
- * will translate to:
- *
- *      8b 84 24 b8 c0 ff ff      mov    -0x3f48(%rsp), %eax
- *
- * which is below the current RSP by almost 16K.
- */
-#define ASM_THREAD_INFO(field, reg, off) ((field)+(off)-THREAD_SIZE)(reg)
-
 #endif
 
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_COMPAT		0x0002	/* 32bit syscall active (64BIT)*/
 #ifdef CONFIG_COMPAT
 #define TS_I386_REGS_POKED	0x0004	/* regs poked by 32-bit ptracer */
 #endif
-
 #ifndef __ASSEMBLY__
 
-static inline bool in_ia32_syscall(void)
-{
 #ifdef CONFIG_X86_32
-	return true;
-#endif
-#ifdef CONFIG_IA32_EMULATION
-	if (current_thread_info()->status & TS_COMPAT)
-		return true;
+#define in_ia32_syscall() true
+#else
+#define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \
+			   current->thread.status & TS_COMPAT)
 #endif
-	return false;
-}
 
 /*
  * Force syscall return via IRET by making it look as if there was
diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index c3496619..01fd0a7 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -117,6 +117,12 @@ extern void ist_exit(struct pt_regs *regs);
 extern void ist_begin_non_atomic(struct pt_regs *regs);
 extern void ist_end_non_atomic(void);
 
+#ifdef CONFIG_VMAP_STACK
+void __noreturn handle_stack_overflow(const char *message,
+				      struct pt_regs *regs,
+				      unsigned long fault_address);
+#endif
+
 /* Interrupts/Exceptions */
 enum {
 	X86_TRAP_DE = 0,	/*  0, Divide-by-zero */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index c3f2911..faf3687 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -11,6 +11,7 @@
 #include <asm/asm.h>
 #include <asm/page.h>
 #include <asm/smap.h>
+#include <asm/extable.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -91,37 +92,6 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
 	likely(!__range_not_ok(addr, size, user_addr_max()))
 
 /*
- * The exception table consists of triples of addresses relative to the
- * exception table entry itself. The first address is of an instruction
- * that is allowed to fault, the second is the target at which the program
- * should continue. The third is a handler function to deal with the fault
- * caused by the instruction in the first field.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-	int insn, fixup, handler;
-};
-
-#define ARCH_HAS_RELATIVE_EXTABLE
-
-#define swap_ex_entry_fixup(a, b, tmp, delta)			\
-	do {							\
-		(a)->fixup = (b)->fixup + (delta);		\
-		(b)->fixup = (tmp).fixup - (delta);		\
-		(a)->handler = (b)->handler + (delta);		\
-		(b)->handler = (tmp).handler - (delta);		\
-	} while (0)
-
-extern int fixup_exception(struct pt_regs *regs, int trapnr);
-extern bool ex_has_fault_handler(unsigned long ip);
-extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
-
-/*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
  *
@@ -433,7 +403,11 @@ do {									\
 #define __get_user_asm_ex(x, addr, itype, rtype, ltype)			\
 	asm volatile("1:	mov"itype" %1,%"rtype"0\n"		\
 		     "2:\n"						\
-		     _ASM_EXTABLE_EX(1b, 2b)				\
+		     ".section .fixup,\"ax\"\n"				\
+                     "3:xor"itype" %"rtype"0,%"rtype"0\n"		\
+		     "  jmp 2b\n"					\
+		     ".previous\n"					\
+		     _ASM_EXTABLE_EX(1b, 3b)				\
 		     : ltype(x) : "m" (__m(addr)))
 
 #define __put_user_nocheck(x, ptr, size)			\
@@ -705,7 +679,7 @@ static inline void copy_user_overflow(int size, unsigned long count)
 	WARN(1, "Buffer overflow detected (%d < %lu)!\n", size, count);
 }
 
-static inline unsigned long __must_check
+static __always_inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	int sz = __compiletime_object_size(to);
@@ -725,7 +699,7 @@ copy_from_user(void *to, const void __user *from, unsigned long n)
 	return n;
 }
 
-static inline unsigned long __must_check
+static __always_inline unsigned long __must_check
 copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	int sz = __compiletime_object_size(from);
diff --git a/arch/x86/include/asm/unwind.h b/arch/x86/include/asm/unwind.h
new file mode 100644
index 0000000..46de9ac
--- /dev/null
+++ b/arch/x86/include/asm/unwind.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_X86_UNWIND_H
+#define _ASM_X86_UNWIND_H
+
+#include <linux/sched.h>
+#include <linux/ftrace.h>
+#include <asm/ptrace.h>
+#include <asm/stacktrace.h>
+
+struct unwind_state {
+	struct stack_info stack_info;
+	unsigned long stack_mask;
+	struct task_struct *task;
+	int graph_idx;
+#ifdef CONFIG_FRAME_POINTER
+	unsigned long *bp;
+#else
+	unsigned long *sp;
+#endif
+};
+
+void __unwind_start(struct unwind_state *state, struct task_struct *task,
+		    struct pt_regs *regs, unsigned long *first_frame);
+
+bool unwind_next_frame(struct unwind_state *state);
+
+unsigned long unwind_get_return_address(struct unwind_state *state);
+
+static inline bool unwind_done(struct unwind_state *state)
+{
+	return state->stack_info.type == STACK_TYPE_UNKNOWN;
+}
+
+static inline
+void unwind_start(struct unwind_state *state, struct task_struct *task,
+		  struct pt_regs *regs, unsigned long *first_frame)
+{
+	first_frame = first_frame ? : get_stack_pointer(task, regs);
+
+	__unwind_start(state, task, regs, first_frame);
+}
+
+#ifdef CONFIG_FRAME_POINTER
+
+static inline
+unsigned long *unwind_get_return_address_ptr(struct unwind_state *state)
+{
+	if (unwind_done(state))
+		return NULL;
+
+	return state->bp + 1;
+}
+
+#else /* !CONFIG_FRAME_POINTER */
+
+static inline
+unsigned long *unwind_get_return_address_ptr(struct unwind_state *state)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_FRAME_POINTER */
+
+#endif /* _ASM_X86_UNWIND_H */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index cc44d92..57ab86d 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -49,14 +49,12 @@
 #define UV_NET_ENDPOINT_INTD		(is_uv1_hub() ?			\
 			UV1_NET_ENDPOINT_INTD : UV2_NET_ENDPOINT_INTD)
 #define UV_DESC_PSHIFT			49
-#define UV_PAYLOADQ_PNODE_SHIFT		49
+#define UV_PAYLOADQ_GNODE_SHIFT		49
 #define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
 #define UV_BAU_BASENAME			"sgi_uv/bau_tunables"
 #define UV_BAU_TUNABLES_DIR		"sgi_uv"
 #define UV_BAU_TUNABLES_FILE		"bau_tunables"
 #define WHITESPACE			" \t\n"
-#define uv_mmask			((1UL << uv_hub_info->m_val) - 1)
-#define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
 #define cpubit_isset(cpu, bau_local_cpumask) \
 	test_bit((cpu), (bau_local_cpumask).bits)
 
@@ -387,6 +385,17 @@ struct uv2_3_bau_msg_header {
 	/* bits 127:120 */
 };
 
+/* Abstracted BAU functions */
+struct bau_operations {
+	unsigned long (*read_l_sw_ack)(void);
+	unsigned long (*read_g_sw_ack)(int pnode);
+	unsigned long (*bau_gpa_to_offset)(unsigned long vaddr);
+	void (*write_l_sw_ack)(unsigned long mmr);
+	void (*write_g_sw_ack)(int pnode, unsigned long mmr);
+	void (*write_payload_first)(int pnode, unsigned long mmr);
+	void (*write_payload_last)(int pnode, unsigned long mmr);
+};
+
 /*
  * The activation descriptor:
  * The format of the message to send, plus all accompanying control
@@ -655,6 +664,16 @@ static inline void write_gmmr_activation(int pnode, unsigned long mmr_image)
 	write_gmmr(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, mmr_image);
 }
 
+static inline void write_mmr_proc_payload_first(int pnode, unsigned long mmr_image)
+{
+	write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_FIRST, mmr_image);
+}
+
+static inline void write_mmr_proc_payload_last(int pnode, unsigned long mmr_image)
+{
+	write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_LAST, mmr_image);
+}
+
 static inline void write_mmr_payload_first(int pnode, unsigned long mmr_image)
 {
 	write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, mmr_image);
@@ -700,6 +719,26 @@ static inline unsigned long read_gmmr_sw_ack(int pnode)
 	return read_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
 }
 
+static inline void write_mmr_proc_sw_ack(unsigned long mr)
+{
+	uv_write_local_mmr(UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
+}
+
+static inline void write_gmmr_proc_sw_ack(int pnode, unsigned long mr)
+{
+	write_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
+}
+
+static inline unsigned long read_mmr_proc_sw_ack(void)
+{
+	return read_lmmr(UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
+}
+
+static inline unsigned long read_gmmr_proc_sw_ack(int pnode)
+{
+	return read_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
+}
+
 static inline void write_mmr_data_config(int pnode, unsigned long mr)
 {
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, mr);
diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h
index 43dc55b..2444189 100644
--- a/arch/x86/include/asm/vdso.h
+++ b/arch/x86/include/asm/vdso.h
@@ -41,6 +41,8 @@ extern const struct vdso_image vdso_image_32;
 
 extern void __init init_vdso_image(const struct vdso_image *image);
 
+extern int map_vdso_once(const struct vdso_image *image, unsigned long addr);
+
 #endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_X86_VDSO_H */
diff --git a/arch/x86/include/asm/xen/events.h b/arch/x86/include/asm/xen/events.h
index e6911ca..608a79d 100644
--- a/arch/x86/include/asm/xen/events.h
+++ b/arch/x86/include/asm/xen/events.h
@@ -20,15 +20,4 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
 /* No need for a barrier -- XCHG is a barrier on x86. */
 #define xchg_xen_ulong(ptr, val) xchg((ptr), (val))
 
-extern int xen_have_vector_callback;
-
-/*
- * Events delivered via platform PCI interrupts are always
- * routed to vcpu 0 and hence cannot be rebound.
- */
-static inline bool xen_support_evtchn_rebind(void)
-{
-	return (!xen_hvm_domain() || xen_have_vector_callback);
-}
-
 #endif /* _ASM_X86_XEN_EVENTS_H */
diff --git a/arch/x86/include/uapi/asm/mce.h b/arch/x86/include/uapi/asm/mce.h
index 2184943..69a6e07 100644
--- a/arch/x86/include/uapi/asm/mce.h
+++ b/arch/x86/include/uapi/asm/mce.h
@@ -26,6 +26,8 @@ struct mce {
 	__u32 socketid;	/* CPU socket ID */
 	__u32 apicid;	/* CPU initial apic ID */
 	__u64 mcgcap;	/* MCGCAP MSR: machine check capabilities of CPU */
+	__u64 synd;	/* MCA_SYND MSR: only valid on SMCA systems */
+	__u64 ipid;	/* MCA_IPID MSR: only valid on SMCA systems */
 };
 
 #define MCE_GET_RECORD_LEN   _IOR('M', 1, int)
diff --git a/arch/x86/include/uapi/asm/prctl.h b/arch/x86/include/uapi/asm/prctl.h
index 3ac5032..ae135de 100644
--- a/arch/x86/include/uapi/asm/prctl.h
+++ b/arch/x86/include/uapi/asm/prctl.h
@@ -6,4 +6,10 @@
 #define ARCH_GET_FS 0x1003
 #define ARCH_GET_GS 0x1004
 
+#ifdef CONFIG_CHECKPOINT_RESTORE
+# define ARCH_MAP_VDSO_X32	0x2001
+# define ARCH_MAP_VDSO_32	0x2002
+# define ARCH_MAP_VDSO_64	0x2003
+#endif
+
 #endif /* _ASM_X86_PRCTL_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0503f5b..4dd5d50 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -83,6 +83,7 @@ obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-y				+= apic/
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_LIVEPATCH)	+= livepatch.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o
 obj-$(CONFIG_X86_TSC)		+= trace_clock.o
@@ -125,6 +126,12 @@ obj-$(CONFIG_EFI)			+= sysfb_efi.o
 obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o
 obj-$(CONFIG_TRACING)			+= tracepoint.o
 
+ifdef CONFIG_FRAME_POINTER
+obj-y					+= unwind_frame.o
+else
+obj-y					+= unwind_guess.o
+endif
+
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 3242e59..26b78d8 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,6 +1,7 @@
 obj-$(CONFIG_ACPI)		+= boot.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
 obj-$(CONFIG_ACPI_APEI)		+= apei.o
+obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc_msr.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 90d84c3..8a5abaa 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -176,15 +176,10 @@ static int acpi_register_lapic(int id, u32 acpiid, u8 enabled)
 		return -EINVAL;
 	}
 
-	if (!enabled) {
-		++disabled_cpus;
-		return -EINVAL;
-	}
-
 	if (boot_cpu_physical_apicid != -1U)
-		ver = apic_version[boot_cpu_physical_apicid];
+		ver = boot_cpu_apic_version;
 
-	cpu = generic_processor_info(id, ver);
+	cpu = __generic_processor_info(id, ver, enabled);
 	if (cpu >= 0)
 		early_per_cpu(x86_cpu_to_acpiid, cpu) = acpiid;
 
@@ -238,6 +233,10 @@ acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
 
 	acpi_table_print_madt_entry(header);
 
+	/* Ignore invalid ID */
+	if (processor->id == 0xff)
+		return 0;
+
 	/*
 	 * We need to register disabled CPU as well to permit
 	 * counting disabled CPUs. This allows us to size
@@ -282,6 +281,8 @@ acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
 	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
 		return -EINVAL;
 
+	acpi_table_print_madt_entry(header);
+
 	acpi_lapic_addr = lapic_addr_ovr->address;
 
 	return 0;
@@ -705,7 +706,7 @@ static void __init acpi_set_irq_model_ioapic(void)
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 #include <acpi/processor.h>
 
-static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int nid;
@@ -716,6 +717,7 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 		numa_set_node(cpu, nid);
 	}
 #endif
+	return 0;
 }
 
 int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, int *pcpu)
@@ -998,21 +1000,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 	if (!boot_cpu_has(X86_FEATURE_APIC))
 		return -ENODEV;
 
-	/*
-	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
-	 * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
-	 */
-
-	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
-				      acpi_parse_lapic_addr_ovr, 0);
-	if (count < 0) {
-		printk(KERN_ERR PREFIX
-		       "Error parsing LAPIC address override entry\n");
-		return count;
-	}
-
-	register_lapic_address(acpi_lapic_addr);
-
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
 				      acpi_parse_sapic, MAX_LOCAL_APIC);
 
@@ -1031,8 +1018,8 @@ static int __init acpi_parse_madt_lapic_entries(void)
 			return ret;
 		}
 
-		x2count = madt_proc[0].count;
-		count = madt_proc[1].count;
+		count = madt_proc[0].count;
+		x2count = madt_proc[1].count;
 	}
 	if (!count && !x2count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
@@ -1513,7 +1500,7 @@ void __init acpi_boot_table_init(void)
 	 * If acpi_disabled, bail out
 	 */
 	if (acpi_disabled)
-		return; 
+		return;
 
 	/*
 	 * Initialize the ACPI boot-time table parser.
diff --git a/arch/x86/kernel/acpi/cppc_msr.c b/arch/x86/kernel/acpi/cppc_msr.c
new file mode 100644
index 0000000..6fb478b
--- /dev/null
+++ b/arch/x86/kernel/acpi/cppc_msr.c
@@ -0,0 +1,58 @@
+/*
+ * cppc_msr.c:  MSR Interface for CPPC
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <acpi/cppc_acpi.h>
+#include <asm/msr.h>
+
+/* Refer to drivers/acpi/cppc_acpi.c for the description of functions */
+
+bool cpc_ffh_supported(void)
+{
+	return true;
+}
+
+int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
+{
+	int err;
+
+	err = rdmsrl_safe_on_cpu(cpunum, reg->address, val);
+	if (!err) {
+		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				       reg->bit_offset);
+
+		*val &= mask;
+		*val >>= reg->bit_offset;
+	}
+	return err;
+}
+
+int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
+{
+	u64 rd_val;
+	int err;
+
+	err = rdmsrl_safe_on_cpu(cpunum, reg->address, &rd_val);
+	if (!err) {
+		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				       reg->bit_offset);
+
+		val <<= reg->bit_offset;
+		val &= mask;
+		rd_val &= ~mask;
+		rd_val |= val;
+		err = wrmsrl_safe_on_cpu(cpunum, reg->address, rd_val);
+	}
+	return err;
+}
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index bdfad64..af15f44 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -152,7 +152,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 }
 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
 
-void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
+void __cpuidle acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
 {
 	unsigned int cpu = smp_processor_id();
 	struct cstate_entry *percpu_entry;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index adb3eaf..4858733 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -99,7 +99,7 @@ int x86_acpi_suspend_lowlevel(void)
 	saved_magic = 0x12345678;
 #else /* CONFIG_64BIT */
 #ifdef CONFIG_SMP
-	stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
+	initial_stack = (unsigned long)temp_stack + sizeof(temp_stack);
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_table(smp_processor_id());
 	initial_gs = per_cpu_offset(smp_processor_id());
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 50c95af..88c657b 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -64,6 +64,8 @@ unsigned disabled_cpus;
 unsigned int boot_cpu_physical_apicid = -1U;
 EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);
 
+u8 boot_cpu_apic_version;
+
 /*
  * The highest APIC ID seen during enumeration.
  */
@@ -1374,7 +1376,6 @@ void setup_local_APIC(void)
 	 * Actually disabling the focus CPU check just makes the hang less
 	 * frequent as it makes the interrupt distributon model be more
 	 * like LRU than MRU (the short-term load is more even across CPUs).
-	 * See also the comment in end_level_ioapic_irq().  --macro
 	 */
 
 	/*
@@ -1816,8 +1817,7 @@ void __init init_apic_mappings(void)
 		 * since smp_sanity_check is prepared for such a case
 		 * and disable smp mode
 		 */
-		apic_version[new_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
+		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
 }
 
@@ -1828,17 +1828,14 @@ void __init register_lapic_address(unsigned long address)
 	if (!x2apic_mode) {
 		set_fixmap_nocache(FIX_APIC_BASE, address);
 		apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-			    APIC_BASE, mp_lapic_addr);
+			    APIC_BASE, address);
 	}
 	if (boot_cpu_physical_apicid == -1U) {
 		boot_cpu_physical_apicid  = read_apic_id();
-		apic_version[boot_cpu_physical_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
+		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
 }
 
-int apic_version[MAX_LOCAL_APIC];
-
 /*
  * Local APIC interrupts
  */
@@ -2027,7 +2024,53 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-int generic_processor_info(int apicid, int version)
+/*
+ * The number of allocated logical CPU IDs. Since logical CPU IDs are allocated
+ * contiguously, it equals to current allocated max logical CPU ID plus 1.
+ * All allocated CPU ID should be in [0, nr_logical_cpuidi), so the maximum of
+ * nr_logical_cpuids is nr_cpu_ids.
+ *
+ * NOTE: Reserve 0 for BSP.
+ */
+static int nr_logical_cpuids = 1;
+
+/*
+ * Used to store mapping between logical CPU IDs and APIC IDs.
+ */
+static int cpuid_to_apicid[] = {
+	[0 ... NR_CPUS - 1] = -1,
+};
+
+/*
+ * Should use this API to allocate logical CPU IDs to keep nr_logical_cpuids
+ * and cpuid_to_apicid[] synchronized.
+ */
+static int allocate_logical_cpuid(int apicid)
+{
+	int i;
+
+	/*
+	 * cpuid <-> apicid mapping is persistent, so when a cpu is up,
+	 * check if the kernel has allocated a cpuid for it.
+	 */
+	for (i = 0; i < nr_logical_cpuids; i++) {
+		if (cpuid_to_apicid[i] == apicid)
+			return i;
+	}
+
+	/* Allocate a new cpuid. */
+	if (nr_logical_cpuids >= nr_cpu_ids) {
+		WARN_ONCE(1, "Only %d processors supported."
+			     "Processor %d/0x%x and the rest are ignored.\n",
+			     nr_cpu_ids - 1, nr_logical_cpuids, apicid);
+		return -1;
+	}
+
+	cpuid_to_apicid[nr_logical_cpuids] = apicid;
+	return nr_logical_cpuids++;
+}
+
+int __generic_processor_info(int apicid, int version, bool enabled)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
@@ -2085,15 +2128,16 @@ int generic_processor_info(int apicid, int version)
 	if (num_processors >= nr_cpu_ids) {
 		int thiscpu = max + disabled_cpus;
 
-		pr_warning(
-			"APIC: NR_CPUS/possible_cpus limit of %i reached."
-			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
+		if (enabled) {
+			pr_warning("APIC: NR_CPUS/possible_cpus limit of %i "
+				   "reached. Processor %d/0x%x ignored.\n",
+				   max, thiscpu, apicid);
+		}
 
 		disabled_cpus++;
 		return -EINVAL;
 	}
 
-	num_processors++;
 	if (apicid == boot_cpu_physical_apicid) {
 		/*
 		 * x86_bios_cpu_apicid is required to have processors listed
@@ -2103,8 +2147,16 @@ int generic_processor_info(int apicid, int version)
 		 * for BSP.
 		 */
 		cpu = 0;
-	} else
-		cpu = cpumask_next_zero(-1, cpu_present_mask);
+
+		/* Logical cpuid 0 is reserved for BSP. */
+		cpuid_to_apicid[0] = apicid;
+	} else {
+		cpu = allocate_logical_cpuid(apicid);
+		if (cpu < 0) {
+			disabled_cpus++;
+			return -EINVAL;
+		}
+	}
 
 	/*
 	 * This can happen on physical hotplug. The sanity check at boot time
@@ -2116,6 +2168,7 @@ int generic_processor_info(int apicid, int version)
 
 		pr_warning("APIC: Package limit reached. Processor %d/0x%x ignored.\n",
 			   thiscpu, apicid);
+
 		disabled_cpus++;
 		return -ENOSPC;
 	}
@@ -2128,14 +2181,12 @@ int generic_processor_info(int apicid, int version)
 			   cpu, apicid);
 		version = 0x10;
 	}
-	apic_version[apicid] = version;
 
-	if (version != apic_version[boot_cpu_physical_apicid]) {
+	if (version != boot_cpu_apic_version) {
 		pr_warning("BIOS bug: APIC version mismatch, boot CPU: %x, CPU %d: version %x\n",
-			apic_version[boot_cpu_physical_apicid], cpu, version);
+			boot_cpu_apic_version, cpu, version);
 	}
 
-	physid_set(apicid, phys_cpu_present_map);
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
@@ -2148,11 +2199,23 @@ int generic_processor_info(int apicid, int version)
 		apic->x86_32_early_logical_apicid(cpu);
 #endif
 	set_cpu_possible(cpu, true);
-	set_cpu_present(cpu, true);
+
+	if (enabled) {
+		num_processors++;
+		physid_set(apicid, phys_cpu_present_map);
+		set_cpu_present(cpu, true);
+	} else {
+		disabled_cpus++;
+	}
 
 	return cpu;
 }
 
+int generic_processor_info(int apicid, int version)
+{
+	return __generic_processor_info(apicid, version, true);
+}
+
 int hard_smp_processor_id(void)
 {
 	return read_apic_id();
@@ -2275,7 +2338,7 @@ int __init APIC_init_uniprocessor(void)
 	 * Complain if the BIOS pretends there is one.
 	 */
 	if (!boot_cpu_has(X86_FEATURE_APIC) &&
-	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+	    APIC_INTEGRATED(boot_cpu_apic_version)) {
 		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
 			boot_cpu_physical_apicid);
 		return -1;
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 5b2ae10..a4d7ff2 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -25,7 +25,7 @@
 static struct apic apic_physflat;
 static struct apic apic_flat;
 
-struct apic __read_mostly *apic = &apic_flat;
+struct apic *apic __ro_after_init = &apic_flat;
 EXPORT_SYMBOL_GPL(apic);
 
 static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
@@ -116,27 +116,17 @@ static void flat_send_IPI_all(int vector)
 
 static unsigned int flat_get_apic_id(unsigned long x)
 {
-	unsigned int id;
-
-	id = (((x)>>24) & 0xFFu);
-
-	return id;
+	return (x >> 24) & 0xFF;
 }
 
 static unsigned long set_apic_id(unsigned int id)
 {
-	unsigned long x;
-
-	x = ((id & 0xFFu)<<24);
-	return x;
+	return (id & 0xFF) << 24;
 }
 
 static unsigned int read_xapic_id(void)
 {
-	unsigned int id;
-
-	id = flat_get_apic_id(apic_read(APIC_ID));
-	return id;
+	return flat_get_apic_id(apic_read(APIC_ID));
 }
 
 static int flat_apic_id_registered(void)
@@ -154,7 +144,7 @@ static int flat_probe(void)
 	return 1;
 }
 
-static struct apic apic_flat =  {
+static struct apic apic_flat __ro_after_init = {
 	.name				= "flat",
 	.probe				= flat_probe,
 	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
@@ -248,7 +238,7 @@ static int physflat_probe(void)
 	return 0;
 }
 
-static struct apic apic_physflat =  {
+static struct apic apic_physflat __ro_after_init = {
 
 	.name				= "physical flat",
 	.probe				= physflat_probe,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index c05688b..b109e43 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -108,7 +108,7 @@ static void noop_apic_write(u32 reg, u32 v)
 	WARN_ON_ONCE(boot_cpu_has(X86_FEATURE_APIC) && !disable_apic);
 }
 
-struct apic apic_noop = {
+struct apic apic_noop __ro_after_init = {
 	.name				= "noop",
 	.probe				= noop_probe,
 	.acpi_madt_oem_check		= NULL,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 714d4fd..e08fe2c 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -40,10 +40,7 @@ static unsigned int numachip1_get_apic_id(unsigned long x)
 
 static unsigned long numachip1_set_apic_id(unsigned int id)
 {
-	unsigned long x;
-
-	x = ((id & 0xffU) << 24);
-	return x;
+	return (id & 0xff) << 24;
 }
 
 static unsigned int numachip2_get_apic_id(unsigned long x)
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 06dbaa4..5601201 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -142,7 +142,7 @@ static int probe_bigsmp(void)
 	return dmi_bigsmp;
 }
 
-static struct apic apic_bigsmp = {
+static struct apic apic_bigsmp __ro_after_init = {
 
 	.name				= "bigsmp",
 	.probe				= probe_bigsmp,
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index f29501e..c73c9fb 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -26,32 +26,32 @@ u64 hw_nmi_get_sample_period(int watchdog_thresh)
 }
 #endif
 
-#ifdef arch_trigger_all_cpu_backtrace
+#ifdef arch_trigger_cpumask_backtrace
 static void nmi_raise_cpu_backtrace(cpumask_t *mask)
 {
 	apic->send_IPI_mask(mask, NMI_VECTOR);
 }
 
-void arch_trigger_all_cpu_backtrace(bool include_self)
+void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self)
 {
-	nmi_trigger_all_cpu_backtrace(include_self, nmi_raise_cpu_backtrace);
+	nmi_trigger_cpumask_backtrace(mask, exclude_self,
+				      nmi_raise_cpu_backtrace);
 }
 
-static int
-arch_trigger_all_cpu_backtrace_handler(unsigned int cmd, struct pt_regs *regs)
+static int nmi_cpu_backtrace_handler(unsigned int cmd, struct pt_regs *regs)
 {
 	if (nmi_cpu_backtrace(regs))
 		return NMI_HANDLED;
 
 	return NMI_DONE;
 }
-NOKPROBE_SYMBOL(arch_trigger_all_cpu_backtrace_handler);
+NOKPROBE_SYMBOL(nmi_cpu_backtrace_handler);
 
-static int __init register_trigger_all_cpu_backtrace(void)
+static int __init register_nmi_cpu_backtrace_handler(void)
 {
-	register_nmi_handler(NMI_LOCAL, arch_trigger_all_cpu_backtrace_handler,
+	register_nmi_handler(NMI_LOCAL, nmi_cpu_backtrace_handler,
 				0, "arch_bt");
 	return 0;
 }
-early_initcall(register_trigger_all_cpu_backtrace);
+early_initcall(register_nmi_cpu_backtrace_handler);
 #endif
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7491f41..48e6d84 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1593,7 +1593,7 @@ void __init setup_ioapic_ids_from_mpc(void)
 	 * no meaning without the serial APIC bus.
 	 */
 	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		|| APIC_XAPIC(boot_cpu_apic_version))
 		return;
 	setup_ioapic_ids_from_mpc_nocheck();
 }
@@ -2423,7 +2423,7 @@ static int io_apic_get_unique_id(int ioapic, int apic_id)
 static u8 io_apic_unique_id(int idx, u8 id)
 {
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+	    !APIC_XAPIC(boot_cpu_apic_version))
 		return io_apic_get_unique_id(idx, id);
 	else
 		return id;
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index ade2532..015bbf3 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -269,7 +269,7 @@ static void hpet_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
 	hpet_msi_write(irq_data_get_irq_handler_data(data), msg);
 }
 
-static struct irq_chip hpet_msi_controller = {
+static struct irq_chip hpet_msi_controller __ro_after_init = {
 	.name = "HPET-MSI",
 	.irq_unmask = hpet_msi_unmask,
 	.irq_mask = hpet_msi_mask,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 7c43e71..c48264e 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -72,7 +72,7 @@ static int probe_default(void)
 	return 1;
 }
 
-static struct apic apic_default = {
+static struct apic apic_default __ro_after_init = {
 
 	.name				= "default",
 	.probe				= probe_default,
@@ -126,7 +126,7 @@ static struct apic apic_default = {
 
 apic_driver(apic_default);
 
-struct apic *apic = &apic_default;
+struct apic *apic __ro_after_init = &apic_default;
 EXPORT_SYMBOL_GPL(apic);
 
 static int cmdline_apic __initdata;
@@ -152,7 +152,7 @@ early_param("apic", parse_apic);
 
 void __init default_setup_apic_routing(void)
 {
-	int version = apic_version[boot_cpu_physical_apicid];
+	int version = boot_cpu_apic_version;
 
 	if (num_possible_cpus() > 8) {
 		switch (boot_cpu_data.x86_vendor) {
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 6066d94..5d30c5e 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -661,11 +661,28 @@ void irq_complete_move(struct irq_cfg *cfg)
  */
 void irq_force_complete_move(struct irq_desc *desc)
 {
-	struct irq_data *irqdata = irq_desc_get_irq_data(desc);
-	struct apic_chip_data *data = apic_chip_data(irqdata);
-	struct irq_cfg *cfg = data ? &data->cfg : NULL;
+	struct irq_data *irqdata;
+	struct apic_chip_data *data;
+	struct irq_cfg *cfg;
 	unsigned int cpu;
 
+	/*
+	 * The function is called for all descriptors regardless of which
+	 * irqdomain they belong to. For example if an IRQ is provided by
+	 * an irq_chip as part of a GPIO driver, the chip data for that
+	 * descriptor is specific to the irq_chip in question.
+	 *
+	 * Check first that the chip_data is what we expect
+	 * (apic_chip_data) before touching it any further.
+	 */
+	irqdata = irq_domain_get_irq_data(x86_vector_domain,
+					  irq_desc_get_irq(desc));
+	if (!irqdata)
+		return;
+
+	data = apic_chip_data(irqdata);
+	cfg = data ? &data->cfg : NULL;
+
 	if (!cfg)
 		return;
 
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 54f35d9..200af5a 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -227,7 +227,7 @@ static void cluster_vector_allocation_domain(int cpu, struct cpumask *retmask,
 		cpumask_and(retmask, mask, per_cpu(cpus_in_cluster, cpu));
 }
 
-static struct apic apic_x2apic_cluster = {
+static struct apic apic_x2apic_cluster __ro_after_init = {
 
 	.name				= "cluster x2apic",
 	.probe				= x2apic_cluster_probe,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 4f13f54f..ff111f0 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -98,7 +98,7 @@ static int x2apic_phys_probe(void)
 	return apic == &apic_x2apic_phys;
 }
 
-static struct apic apic_x2apic_phys = {
+static struct apic apic_x2apic_phys __ro_after_init = {
 
 	.name				= "physical x2apic",
 	.probe				= x2apic_phys_probe,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index cb0673c..aeef53c 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -533,11 +533,8 @@ static unsigned int x2apic_get_apic_id(unsigned long x)
 
 static unsigned long set_apic_id(unsigned int id)
 {
-	unsigned long x;
-
-	/* maskout x2apic_extra_bits ? */
-	x = id;
-	return x;
+	/* CHECKME: Do we need to mask out the xapic extra bits? */
+	return id;
 }
 
 static unsigned int uv_read_apic_id(void)
@@ -560,7 +557,7 @@ static int uv_probe(void)
 	return apic == &apic_x2apic_uv_x;
 }
 
-static struct apic __refdata apic_x2apic_uv_x = {
+static struct apic apic_x2apic_uv_x __ro_after_init = {
 
 	.name				= "UV large system",
 	.probe				= uv_probe,
@@ -927,7 +924,7 @@ static void uv_heartbeat(unsigned long ignored)
 	mod_timer(timer, jiffies + SCIR_CPU_HB_INTERVAL);
 }
 
-static void uv_heartbeat_enable(int cpu)
+static int uv_heartbeat_enable(unsigned int cpu)
 {
 	while (!uv_cpu_scir_info(cpu)->enabled) {
 		struct timer_list *timer = &uv_cpu_scir_info(cpu)->timer;
@@ -941,43 +938,24 @@ static void uv_heartbeat_enable(int cpu)
 		/* also ensure that boot cpu is enabled */
 		cpu = 0;
 	}
+	return 0;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void uv_heartbeat_disable(int cpu)
+static int uv_heartbeat_disable(unsigned int cpu)
 {
 	if (uv_cpu_scir_info(cpu)->enabled) {
 		uv_cpu_scir_info(cpu)->enabled = 0;
 		del_timer(&uv_cpu_scir_info(cpu)->timer);
 	}
 	uv_set_cpu_scir_bits(cpu, 0xff);
-}
-
-/*
- * cpu hotplug notifier
- */
-static int uv_scir_cpu_notify(struct notifier_block *self, unsigned long action,
-			      void *hcpu)
-{
-	long cpu = (long)hcpu;
-
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_DOWN_FAILED:
-	case CPU_ONLINE:
-		uv_heartbeat_enable(cpu);
-		break;
-	case CPU_DOWN_PREPARE:
-		uv_heartbeat_disable(cpu);
-		break;
-	default:
-		break;
-	}
-	return NOTIFY_OK;
+	return 0;
 }
 
 static __init void uv_scir_register_cpu_notifier(void)
 {
-	hotcpu_notifier(uv_scir_cpu_notify, 0);
+	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/x2apic-uvx:online",
+				  uv_heartbeat_enable, uv_heartbeat_disable);
 }
 
 #else /* !CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 2bd5c6f..c62e015 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -29,10 +29,13 @@
 
 void common(void) {
 	BLANK();
-	OFFSET(TI_flags, thread_info, flags);
-	OFFSET(TI_status, thread_info, status);
+	OFFSET(TASK_threadsp, task_struct, thread.sp);
+#ifdef CONFIG_CC_STACKPROTECTOR
+	OFFSET(TASK_stack_canary, task_struct, stack_canary);
+#endif
 
 	BLANK();
+	OFFSET(TASK_TI_flags, task_struct, thread_info.flags);
 	OFFSET(TASK_addr_limit, task_struct, thread.addr_limit);
 
 	BLANK();
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index ecdc1d2..880aa09 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -57,6 +57,11 @@ void foo(void)
 	/* Size of SYSENTER_stack */
 	DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+	BLANK();
+	OFFSET(stack_canary_offset, stack_canary, canary);
+#endif
+
 #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
 	BLANK();
 	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index d875f97..210927e 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -56,6 +56,11 @@ int main(void)
 	OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
 	BLANK();
 
+#ifdef CONFIG_CC_STACKPROTECTOR
+	DEFINE(stack_canary_offset, offsetof(union irq_stack_union, stack_canary));
+	BLANK();
+#endif
+
 	DEFINE(__NR_syscall_max, sizeof(syscalls_64) - 1);
 	DEFINE(NR_syscalls, sizeof(syscalls_64));
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 809eda0..9bd910a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -804,21 +804,20 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 		identify_cpu_without_cpuid(c);
 
 	/* cyrix could have cpuid enabled via c_identify()*/
-	if (!have_cpuid_p())
-		return;
-
-	cpu_detect(c);
-	get_cpu_vendor(c);
-	get_cpu_cap(c);
+	if (have_cpuid_p()) {
+		cpu_detect(c);
+		get_cpu_vendor(c);
+		get_cpu_cap(c);
 
-	if (this_cpu->c_early_init)
-		this_cpu->c_early_init(c);
+		if (this_cpu->c_early_init)
+			this_cpu->c_early_init(c);
 
-	c->cpu_index = 0;
-	filter_cpuid_features(c, false);
+		c->cpu_index = 0;
+		filter_cpuid_features(c, false);
 
-	if (this_cpu->c_bsp_init)
-		this_cpu->c_bsp_init(c);
+		if (this_cpu->c_bsp_init)
+			this_cpu->c_bsp_init(c);
+	}
 
 	setup_force_cpu_cap(X86_FEATURE_ALWAYS);
 	fpu__init_system(c);
@@ -1265,9 +1264,14 @@ static __init int setup_disablecpuid(char *arg)
 __setup("clearcpuid=", setup_disablecpuid);
 
 #ifdef CONFIG_X86_64
-struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
-struct desc_ptr debug_idt_descr = { NR_VECTORS * 16 - 1,
-				    (unsigned long) debug_idt_table };
+struct desc_ptr idt_descr __ro_after_init = {
+	.size = NR_VECTORS * 16 - 1,
+	.address = (unsigned long) idt_table,
+};
+const struct desc_ptr debug_idt_descr = {
+	.size = NR_VECTORS * 16 - 1,
+	.address = (unsigned long) debug_idt_table,
+};
 
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
 		     irq_stack_union) __aligned(PAGE_SIZE) __visible;
@@ -1281,7 +1285,7 @@ DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
 EXPORT_PER_CPU_SYMBOL(current_task);
 
 DEFINE_PER_CPU(char *, irq_stack_ptr) =
-	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE;
 
 DEFINE_PER_CPU(unsigned int, irq_count) __visible = -1;
 
@@ -1305,11 +1309,6 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
 {
-	/*
-	 * LSTAR and STAR live in a bit strange symbiosis.
-	 * They both write to the same internal register. STAR allows to
-	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
-	 */
 	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
 	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index 27e4665..35691a6 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -86,3 +86,14 @@ bool __init hypervisor_x2apic_available(void)
 	       x86_hyper->x2apic_available &&
 	       x86_hyper->x2apic_available();
 }
+
+void hypervisor_pin_vcpu(int cpu)
+{
+	if (!x86_hyper)
+		return;
+
+	if (x86_hyper->pin_vcpu)
+		x86_hyper->pin_vcpu(cpu);
+	else
+		WARN_ONCE(1, "vcpu pinning requested but not supported!\n");
+}
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 79d8ec8..a7fdf45 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -41,6 +41,7 @@
 #include <linux/debugfs.h>
 #include <linux/irq_work.h>
 #include <linux/export.h>
+#include <linux/jump_label.h>
 
 #include <asm/processor.h>
 #include <asm/traps.h>
@@ -292,6 +293,13 @@ static void print_mce(struct mce *m)
 	if (m->misc)
 		pr_cont("MISC %llx ", m->misc);
 
+	if (mce_flags.smca) {
+		if (m->synd)
+			pr_cont("SYND %llx ", m->synd);
+		if (m->ipid)
+			pr_cont("IPID %llx ", m->ipid);
+	}
+
 	pr_cont("\n");
 	/*
 	 * Note this output is parsed by external tools and old fields
@@ -568,6 +576,7 @@ static void mce_read_aux(struct mce *m, int i)
 {
 	if (m->status & MCI_STATUS_MISCV)
 		m->misc = mce_rdmsrl(msr_ops.misc(i));
+
 	if (m->status & MCI_STATUS_ADDRV) {
 		m->addr = mce_rdmsrl(msr_ops.addr(i));
 
@@ -579,6 +588,23 @@ static void mce_read_aux(struct mce *m, int i)
 			m->addr >>= shift;
 			m->addr <<= shift;
 		}
+
+		/*
+		 * Extract [55:<lsb>] where lsb is the least significant
+		 * *valid* bit of the address bits.
+		 */
+		if (mce_flags.smca) {
+			u8 lsb = (m->addr >> 56) & 0x3f;
+
+			m->addr &= GENMASK_ULL(55, lsb);
+		}
+	}
+
+	if (mce_flags.smca) {
+		m->ipid = mce_rdmsrl(MSR_AMD64_SMCA_MCx_IPID(i));
+
+		if (m->status & MCI_STATUS_SYNDV)
+			m->synd = mce_rdmsrl(MSR_AMD64_SMCA_MCx_SYND(i));
 	}
 }
 
@@ -1633,17 +1659,6 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 
 		if (c->x86 == 6 && c->x86_model == 45)
 			quirk_no_way_out = quirk_sandybridge_ifu;
-		/*
-		 * MCG_CAP.MCG_SER_P is necessary but not sufficient to know
-		 * whether this processor will actually generate recoverable
-		 * machine checks. Check to see if this is an E7 model Xeon.
-		 * We can't do a model number check because E5 and E7 use the
-		 * same model number. E5 doesn't support recovery, E7 does.
-		 */
-		if (mca_cfg.recovery || (mca_cfg.ser &&
-			!strncmp(c->x86_model_id,
-				 "Intel(R) Xeon(R) CPU E7-", 24)))
-			set_cpu_cap(c, X86_FEATURE_MCE_RECOVERY);
 	}
 	if (cfg->monarch_timeout < 0)
 		cfg->monarch_timeout = 0;
@@ -2080,6 +2095,7 @@ void mce_disable_bank(int bank)
  * mce=bootlog Log MCEs from before booting. Disabled by default on AMD.
  * mce=nobootlog Don't log MCEs from before booting.
  * mce=bios_cmci_threshold Don't program the CMCI threshold
+ * mce=recovery force enable memcpy_mcsafe()
  */
 static int __init mcheck_enable(char *str)
 {
@@ -2676,8 +2692,14 @@ static int __init mcheck_debugfs_init(void)
 static int __init mcheck_debugfs_init(void) { return -EINVAL; }
 #endif
 
+DEFINE_STATIC_KEY_FALSE(mcsafe_key);
+EXPORT_SYMBOL_GPL(mcsafe_key);
+
 static int __init mcheck_late_init(void)
 {
+	if (mca_cfg.recovery)
+		static_branch_inc(&mcsafe_key);
+
 	mcheck_debugfs_init();
 
 	/*
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 7b7f3be..9b54034 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
+#include <linux/string.h>
 
 #include <asm/amd_nb.h>
 #include <asm/apic.h>
@@ -63,34 +64,71 @@ static const char * const th_names[] = {
 	"execution_unit",
 };
 
-/* Define HWID to IP type mappings for Scalable MCA */
-struct amd_hwid amd_hwids[] = {
-	[SMCA_F17H_CORE]	= { "f17h_core",	0xB0 },
-	[SMCA_DF]		= { "data_fabric",	0x2E },
-	[SMCA_UMC]		= { "umc",		0x96 },
-	[SMCA_PB]		= { "param_block",	0x5 },
-	[SMCA_PSP]		= { "psp",		0xFF },
-	[SMCA_SMU]		= { "smu",		0x1 },
+static const char * const smca_umc_block_names[] = {
+	"dram_ecc",
+	"misc_umc"
 };
-EXPORT_SYMBOL_GPL(amd_hwids);
-
-const char * const amd_core_mcablock_names[] = {
-	[SMCA_LS]		= "load_store",
-	[SMCA_IF]		= "insn_fetch",
-	[SMCA_L2_CACHE]		= "l2_cache",
-	[SMCA_DE]		= "decode_unit",
-	[RES]			= "",
-	[SMCA_EX]		= "execution_unit",
-	[SMCA_FP]		= "floating_point",
-	[SMCA_L3_CACHE]		= "l3_cache",
+
+struct smca_bank_name smca_bank_names[] = {
+	[SMCA_LS]	= { "load_store",	"Load Store Unit" },
+	[SMCA_IF]	= { "insn_fetch",	"Instruction Fetch Unit" },
+	[SMCA_L2_CACHE]	= { "l2_cache",		"L2 Cache" },
+	[SMCA_DE]	= { "decode_unit",	"Decode Unit" },
+	[SMCA_EX]	= { "execution_unit",	"Execution Unit" },
+	[SMCA_FP]	= { "floating_point",	"Floating Point Unit" },
+	[SMCA_L3_CACHE]	= { "l3_cache",		"L3 Cache" },
+	[SMCA_CS]	= { "coherent_slave",	"Coherent Slave" },
+	[SMCA_PIE]	= { "pie",		"Power, Interrupts, etc." },
+	[SMCA_UMC]	= { "umc",		"Unified Memory Controller" },
+	[SMCA_PB]	= { "param_block",	"Parameter Block" },
+	[SMCA_PSP]	= { "psp",		"Platform Security Processor" },
+	[SMCA_SMU]	= { "smu",		"System Management Unit" },
 };
-EXPORT_SYMBOL_GPL(amd_core_mcablock_names);
+EXPORT_SYMBOL_GPL(smca_bank_names);
+
+static struct smca_hwid_mcatype smca_hwid_mcatypes[] = {
+	/* { bank_type, hwid_mcatype, xec_bitmap } */
+
+	/* ZN Core (HWID=0xB0) MCA types */
+	{ SMCA_LS,	 HWID_MCATYPE(0xB0, 0x0), 0x1FFFEF },
+	{ SMCA_IF,	 HWID_MCATYPE(0xB0, 0x1), 0x3FFF },
+	{ SMCA_L2_CACHE, HWID_MCATYPE(0xB0, 0x2), 0xF },
+	{ SMCA_DE,	 HWID_MCATYPE(0xB0, 0x3), 0x1FF },
+	/* HWID 0xB0 MCATYPE 0x4 is Reserved */
+	{ SMCA_EX,	 HWID_MCATYPE(0xB0, 0x5), 0x7FF },
+	{ SMCA_FP,	 HWID_MCATYPE(0xB0, 0x6), 0x7F },
+	{ SMCA_L3_CACHE, HWID_MCATYPE(0xB0, 0x7), 0xFF },
+
+	/* Data Fabric MCA types */
+	{ SMCA_CS,	 HWID_MCATYPE(0x2E, 0x0), 0x1FF },
+	{ SMCA_PIE,	 HWID_MCATYPE(0x2E, 0x1), 0xF },
+
+	/* Unified Memory Controller MCA type */
+	{ SMCA_UMC,	 HWID_MCATYPE(0x96, 0x0), 0x3F },
+
+	/* Parameter Block MCA type */
+	{ SMCA_PB,	 HWID_MCATYPE(0x05, 0x0), 0x1 },
+
+	/* Platform Security Processor MCA type */
+	{ SMCA_PSP,	 HWID_MCATYPE(0xFF, 0x0), 0x1 },
 
-const char * const amd_df_mcablock_names[] = {
-	[SMCA_CS]		= "coherent_slave",
-	[SMCA_PIE]		= "pie",
+	/* System Management Unit MCA type */
+	{ SMCA_SMU,	 HWID_MCATYPE(0x01, 0x0), 0x1 },
 };
-EXPORT_SYMBOL_GPL(amd_df_mcablock_names);
+
+struct smca_bank_info smca_banks[MAX_NR_BANKS];
+EXPORT_SYMBOL_GPL(smca_banks);
+
+/*
+ * In SMCA enabled processors, we can have multiple banks for a given IP type.
+ * So to define a unique name for each bank, we use a temp c-string to append
+ * the MCA_IPID[InstanceId] to type's name in get_name().
+ *
+ * InstanceId is 32 bits which is 8 characters. Make sure MAX_MCATYPE_NAME_LEN
+ * is greater than 8 plus 1 (for underscore) plus length of longest type name.
+ */
+#define MAX_MCATYPE_NAME_LEN	30
+static char buf_mcatype[MAX_MCATYPE_NAME_LEN];
 
 static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
 static DEFINE_PER_CPU(unsigned int, bank_map);	/* see which banks are on */
@@ -108,6 +146,36 @@ void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
  * CPU Initialization
  */
 
+static void get_smca_bank_info(unsigned int bank)
+{
+	unsigned int i, hwid_mcatype, cpu = smp_processor_id();
+	struct smca_hwid_mcatype *type;
+	u32 high, instanceId;
+	u16 hwid, mcatype;
+
+	/* Collect bank_info using CPU 0 for now. */
+	if (cpu)
+		return;
+
+	if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_IPID(bank), &instanceId, &high)) {
+		pr_warn("Failed to read MCA_IPID for bank %d\n", bank);
+		return;
+	}
+
+	hwid = high & MCI_IPID_HWID;
+	mcatype = (high & MCI_IPID_MCATYPE) >> 16;
+	hwid_mcatype = HWID_MCATYPE(hwid, mcatype);
+
+	for (i = 0; i < ARRAY_SIZE(smca_hwid_mcatypes); i++) {
+		type = &smca_hwid_mcatypes[i];
+		if (hwid_mcatype == type->hwid_mcatype) {
+			smca_banks[bank].type = type;
+			smca_banks[bank].type_instance = instanceId;
+			break;
+		}
+	}
+}
+
 struct thresh_restart {
 	struct threshold_block	*b;
 	int			reset;
@@ -293,7 +361,7 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
 	wrmsr(MSR_CU_DEF_ERR, low, high);
 }
 
-static u32 get_block_address(u32 current_addr, u32 low, u32 high,
+static u32 get_block_address(unsigned int cpu, u32 current_addr, u32 low, u32 high,
 			     unsigned int bank, unsigned int block)
 {
 	u32 addr = 0, offset = 0;
@@ -309,13 +377,13 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 			 */
 			u32 low, high;
 
-			if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
+			if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
 				return addr;
 
 			if (!(low & MCI_CONFIG_MCAX))
 				return addr;
 
-			if (!rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
+			if (!rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
 			    (low & MASK_BLKPTR_LO))
 				addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
 		}
@@ -395,6 +463,20 @@ prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,
 		 */
 		smca_high &= ~BIT(2);
 
+		/*
+		 * SMCA sets the Deferred Error Interrupt type per bank.
+		 *
+		 * MCA_CONFIG[DeferredIntTypeSupported] is bit 5, and tells us
+		 * if the DeferredIntType bit field is available.
+		 *
+		 * MCA_CONFIG[DeferredIntType] is bits [38:37] ([6:5] in the
+		 * high portion of the MSR). OS should set this to 0x1 to enable
+		 * APIC based interrupt. First, check that no interrupt has been
+		 * set.
+		 */
+		if ((smca_low & BIT(5)) && !((smca_high >> 5) & 0x3))
+			smca_high |= BIT(5);
+
 		wrmsr(smca_addr, smca_low, smca_high);
 	}
 
@@ -421,12 +503,15 @@ out:
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
 	u32 low = 0, high = 0, address = 0;
-	unsigned int bank, block;
+	unsigned int bank, block, cpu = smp_processor_id();
 	int offset = -1;
 
 	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+		if (mce_flags.smca)
+			get_smca_bank_info(bank);
+
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			address = get_block_address(address, low, high, bank, block);
+			address = get_block_address(cpu, address, low, high, bank, block);
 			if (!address)
 				break;
 
@@ -476,9 +561,27 @@ __log_error(unsigned int bank, bool deferred_err, bool threshold_err, u64 misc)
 	if (threshold_err)
 		m.misc = misc;
 
-	if (m.status & MCI_STATUS_ADDRV)
+	if (m.status & MCI_STATUS_ADDRV) {
 		rdmsrl(msr_addr, m.addr);
 
+		/*
+		 * Extract [55:<lsb>] where lsb is the least significant
+		 * *valid* bit of the address bits.
+		 */
+		if (mce_flags.smca) {
+			u8 lsb = (m.addr >> 56) & 0x3f;
+
+			m.addr &= GENMASK_ULL(55, lsb);
+		}
+	}
+
+	if (mce_flags.smca) {
+		rdmsrl(MSR_AMD64_SMCA_MCx_IPID(bank), m.ipid);
+
+		if (m.status & MCI_STATUS_SYNDV)
+			rdmsrl(MSR_AMD64_SMCA_MCx_SYND(bank), m.synd);
+	}
+
 	mce_log(&m);
 
 	wrmsrl(msr_status, 0);
@@ -541,15 +644,14 @@ static void amd_deferred_error_interrupt(void)
 static void amd_threshold_interrupt(void)
 {
 	u32 low = 0, high = 0, address = 0;
-	int cpu = smp_processor_id();
-	unsigned int bank, block;
+	unsigned int bank, block, cpu = smp_processor_id();
 
 	/* assume first bank caused it */
 	for (bank = 0; bank < mca_cfg.banks; ++bank) {
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			address = get_block_address(address, low, high, bank, block);
+			address = get_block_address(cpu, address, low, high, bank, block);
 			if (!address)
 				break;
 
@@ -713,6 +815,34 @@ static struct kobj_type threshold_ktype = {
 	.default_attrs		= default_attrs,
 };
 
+static const char *get_name(unsigned int bank, struct threshold_block *b)
+{
+	unsigned int bank_type;
+
+	if (!mce_flags.smca) {
+		if (b && bank == 4)
+			return bank4_names(b);
+
+		return th_names[bank];
+	}
+
+	if (!smca_banks[bank].type)
+		return NULL;
+
+	bank_type = smca_banks[bank].type->bank_type;
+
+	if (b && bank_type == SMCA_UMC) {
+		if (b->block < ARRAY_SIZE(smca_umc_block_names))
+			return smca_umc_block_names[b->block];
+		return NULL;
+	}
+
+	snprintf(buf_mcatype, MAX_MCATYPE_NAME_LEN,
+		 "%s_%x", smca_bank_names[bank_type].name,
+			  smca_banks[bank].type_instance);
+	return buf_mcatype;
+}
+
 static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 				     unsigned int block, u32 address)
 {
@@ -767,11 +897,11 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 
 	err = kobject_init_and_add(&b->kobj, &threshold_ktype,
 				   per_cpu(threshold_banks, cpu)[bank]->kobj,
-				   (bank == 4 ? bank4_names(b) : th_names[bank]));
+				   get_name(bank, b));
 	if (err)
 		goto out_free;
 recurse:
-	address = get_block_address(address, low, high, bank, ++block);
+	address = get_block_address(cpu, address, low, high, bank, ++block);
 	if (!address)
 		return 0;
 
@@ -822,7 +952,7 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	struct device *dev = per_cpu(mce_device, cpu);
 	struct amd_northbridge *nb = NULL;
 	struct threshold_bank *b = NULL;
-	const char *name = th_names[bank];
+	const char *name = get_name(bank, NULL);
 	int err = 0;
 
 	if (is_shared_bank(bank)) {
@@ -869,7 +999,7 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		}
 	}
 
-	err = allocate_threshold_blocks(cpu, bank, 0, MSR_IA32_MCx_MISC(bank));
+	err = allocate_threshold_blocks(cpu, bank, 0, msr_ops.misc(bank));
 	if (!err)
 		goto out;
 
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index b816971..620ab06 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -54,6 +54,7 @@ static LIST_HEAD(pcache);
  */
 static u8 *container;
 static size_t container_size;
+static bool ucode_builtin;
 
 static u32 ucode_new_rev;
 static u8 amd_ucode_patch[PATCH_MAX_SIZE];
@@ -281,18 +282,22 @@ static bool __init load_builtin_amd_microcode(struct cpio_data *cp,
 void __init load_ucode_amd_bsp(unsigned int family)
 {
 	struct cpio_data cp;
+	bool *builtin;
 	void **data;
 	size_t *size;
 
 #ifdef CONFIG_X86_32
 	data =  (void **)__pa_nodebug(&ucode_cpio.data);
 	size = (size_t *)__pa_nodebug(&ucode_cpio.size);
+	builtin = (bool *)__pa_nodebug(&ucode_builtin);
 #else
 	data = &ucode_cpio.data;
 	size = &ucode_cpio.size;
+	builtin = &ucode_builtin;
 #endif
 
-	if (!load_builtin_amd_microcode(&cp, family))
+	*builtin = load_builtin_amd_microcode(&cp, family);
+	if (!*builtin)
 		cp = find_ucode_in_initrd();
 
 	if (!(cp.data && cp.size))
@@ -373,7 +378,8 @@ void load_ucode_amd_ap(void)
 		return;
 
 	/* Add CONFIG_RANDOMIZE_MEMORY offset. */
-	cont += PAGE_OFFSET - __PAGE_OFFSET_BASE;
+	if (!ucode_builtin)
+		cont += PAGE_OFFSET - __PAGE_OFFSET_BASE;
 
 	eax = cpuid_eax(0x00000001);
 	eq  = (struct equiv_cpu_entry *)(cont + CONTAINER_HDR_SZ);
@@ -439,7 +445,8 @@ int __init save_microcode_in_initrd_amd(void)
 		container = cont_va;
 
 	/* Add CONFIG_RANDOMIZE_MEMORY offset. */
-	container += PAGE_OFFSET - __PAGE_OFFSET_BASE;
+	if (!ucode_builtin)
+		container += PAGE_OFFSET - __PAGE_OFFSET_BASE;
 
 	eax   = cpuid_eax(0x00000001);
 	eax   = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index df04b2d..5ce5155 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -558,55 +558,36 @@ static struct syscore_ops mc_syscore_ops = {
 	.resume			= mc_bp_resume,
 };
 
-static int
-mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+static int mc_cpu_online(unsigned int cpu)
 {
-	unsigned int cpu = (unsigned long)hcpu;
 	struct device *dev;
 
 	dev = get_cpu_device(cpu);
+	microcode_update_cpu(cpu);
+	pr_debug("CPU%d added\n", cpu);
 
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_ONLINE:
-		microcode_update_cpu(cpu);
-		pr_debug("CPU%d added\n", cpu);
-		/*
-		 * "break" is missing on purpose here because we want to fall
-		 * through in order to create the sysfs group.
-		 */
-
-	case CPU_DOWN_FAILED:
-		if (sysfs_create_group(&dev->kobj, &mc_attr_group))
-			pr_err("Failed to create group for CPU%d\n", cpu);
-		break;
+	if (sysfs_create_group(&dev->kobj, &mc_attr_group))
+		pr_err("Failed to create group for CPU%d\n", cpu);
+	return 0;
+}
 
-	case CPU_DOWN_PREPARE:
-		/* Suspend is in progress, only remove the interface */
-		sysfs_remove_group(&dev->kobj, &mc_attr_group);
-		pr_debug("CPU%d removed\n", cpu);
-		break;
+static int mc_cpu_down_prep(unsigned int cpu)
+{
+	struct device *dev;
 
+	dev = get_cpu_device(cpu);
+	/* Suspend is in progress, only remove the interface */
+	sysfs_remove_group(&dev->kobj, &mc_attr_group);
+	pr_debug("CPU%d removed\n", cpu);
 	/*
-	 * case CPU_DEAD:
-	 *
 	 * When a CPU goes offline, don't free up or invalidate the copy of
 	 * the microcode in kernel memory, so that we can reuse it when the
 	 * CPU comes back online without unnecessarily requesting the userspace
 	 * for it again.
 	 */
-	}
-
-	/* The CPU refused to come up during a system resume */
-	if (action == CPU_UP_CANCELED_FROZEN)
-		microcode_fini_cpu(cpu);
-
-	return NOTIFY_OK;
+	return 0;
 }
 
-static struct notifier_block mc_cpu_notifier = {
-	.notifier_call	= mc_cpu_callback,
-};
-
 static struct attribute *cpu_root_microcode_attrs[] = {
 	&dev_attr_reload.attr,
 	NULL
@@ -665,7 +646,8 @@ int __init microcode_init(void)
 		goto out_ucode_group;
 
 	register_syscore_ops(&mc_syscore_ops);
-	register_hotcpu_notifier(&mc_cpu_notifier);
+	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/microcode:online",
+				  mc_cpu_online, mc_cpu_down_prep);
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION
 		" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 28f1b54..24e87e7 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -72,14 +72,14 @@ static DEFINE_MUTEX(mtrr_mutex);
 u64 size_or_mask, size_and_mask;
 static bool mtrr_aps_delayed_init;
 
-static const struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
+static const struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM] __ro_after_init;
 
 const struct mtrr_ops *mtrr_if;
 
 static void set_mtrr(unsigned int reg, unsigned long base,
 		     unsigned long size, mtrr_type type);
 
-void set_mtrr_ops(const struct mtrr_ops *ops)
+void __init set_mtrr_ops(const struct mtrr_ops *ops)
 {
 	if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
 		mtrr_ops[ops->vendor] = ops;
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 6c7ced0..ad8bd76 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -54,7 +54,7 @@ void fill_mtrr_var_range(unsigned int index,
 bool get_mtrr_state(void);
 void mtrr_bp_pat_init(void);
 
-extern void set_mtrr_ops(const struct mtrr_ops *ops);
+extern void __init set_mtrr_ops(const struct mtrr_ops *ops);
 
 extern u64 size_or_mask, size_and_mask;
 extern const struct mtrr_ops *mtrr_if;
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 1ff0598..8116057 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -27,6 +27,7 @@
 #include <asm/div64.h>
 #include <asm/x86_init.h>
 #include <asm/hypervisor.h>
+#include <asm/apic.h>
 
 #define CPUID_VMWARE_INFO_LEAF	0x40000000
 #define VMWARE_HYPERVISOR_MAGIC	0x564D5868
@@ -82,10 +83,17 @@ static void __init vmware_platform_setup(void)
 
 	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
 
-	if (ebx != UINT_MAX)
+	if (ebx != UINT_MAX) {
 		x86_platform.calibrate_tsc = vmware_get_tsc_khz;
-	else
+#ifdef CONFIG_X86_LOCAL_APIC
+		/* Skip lapic calibration since we know the bus frequency. */
+		lapic_timer_frequency = ecx / HZ;
+		pr_info("Host bus clock speed read from hypervisor : %u Hz\n",
+			ecx);
+#endif
+	} else {
 		pr_warn("Failed to get TSC freq from the hypervisor\n");
+	}
 }
 
 /*
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 9616cf7..650830e 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -133,15 +133,31 @@ static void kdump_nmi_callback(int cpu, struct pt_regs *regs)
 	disable_local_APIC();
 }
 
-static void kdump_nmi_shootdown_cpus(void)
+void kdump_nmi_shootdown_cpus(void)
 {
 	nmi_shootdown_cpus(kdump_nmi_callback);
 
 	disable_local_APIC();
 }
 
+/* Override the weak function in kernel/panic.c */
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+
+	if (cpus_stopped)
+		return;
+
+	if (smp_ops.crash_stop_other_cpus)
+		smp_ops.crash_stop_other_cpus();
+	else
+		smp_send_stop();
+
+	cpus_stopped = 1;
+}
+
 #else
-static void kdump_nmi_shootdown_cpus(void)
+void crash_smp_send_stop(void)
 {
 	/* There are no cpus to shootdown */
 }
@@ -160,7 +176,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 	/* The kernel is broken so disable interrupts */
 	local_irq_disable();
 
-	kdump_nmi_shootdown_cpus();
+	crash_smp_send_stop();
 
 	/*
 	 * VMCLEAR VMCSs loaded on this cpu if needed.
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 92e8f0a..9b7cf5c 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -17,7 +17,7 @@
 #include <linux/sysfs.h>
 
 #include <asm/stacktrace.h>
-
+#include <asm/unwind.h>
 
 int panic_on_unrecovered_nmi;
 int panic_on_io_nmi;
@@ -25,11 +25,29 @@ unsigned int code_bytes = 64;
 int kstack_depth_to_print = 3 * STACKSLOTS_PER_LINE;
 static int die_counter;
 
+bool in_task_stack(unsigned long *stack, struct task_struct *task,
+		   struct stack_info *info)
+{
+	unsigned long *begin = task_stack_page(task);
+	unsigned long *end   = task_stack_page(task) + THREAD_SIZE;
+
+	if (stack < begin || stack >= end)
+		return false;
+
+	info->type	= STACK_TYPE_TASK;
+	info->begin	= begin;
+	info->end	= end;
+	info->next_sp	= NULL;
+
+	return true;
+}
+
 static void printk_stack_address(unsigned long address, int reliable,
-		void *data)
+				 char *log_lvl)
 {
+	touch_nmi_watchdog();
 	printk("%s [<%p>] %s%pB\n",
-		(char *)data, (void *)address, reliable ? "" : "? ",
+		log_lvl, (void *)address, reliable ? "" : "? ",
 		(void *)address);
 }
 
@@ -38,176 +56,120 @@ void printk_address(unsigned long address)
 	pr_cont(" [<%p>] %pS\n", (void *)address, (void *)address);
 }
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-static void
-print_ftrace_graph_addr(unsigned long addr, void *data,
-			const struct stacktrace_ops *ops,
-			struct task_struct *task, int *graph)
+void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+			unsigned long *stack, char *log_lvl)
 {
-	unsigned long ret_addr;
-	int index;
-
-	if (addr != (unsigned long)return_to_handler)
-		return;
-
-	index = task->curr_ret_stack;
-
-	if (!task->ret_stack || index < *graph)
-		return;
-
-	index -= *graph;
-	ret_addr = task->ret_stack[index].ret;
-
-	ops->address(data, ret_addr, 1);
+	struct unwind_state state;
+	struct stack_info stack_info = {0};
+	unsigned long visit_mask = 0;
+	int graph_idx = 0;
 
-	(*graph)++;
-}
-#else
-static inline void
-print_ftrace_graph_addr(unsigned long addr, void *data,
-			const struct stacktrace_ops *ops,
-			struct task_struct *task, int *graph)
-{ }
-#endif
-
-/*
- * x86-64 can have up to three kernel stacks:
- * process stack
- * interrupt stack
- * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
- */
-
-static inline int valid_stack_ptr(struct task_struct *task,
-			void *p, unsigned int size, void *end)
-{
-	void *t = task_stack_page(task);
-	if (end) {
-		if (p < end && p >= (end-THREAD_SIZE))
-			return 1;
-		else
-			return 0;
-	}
-	return p >= t && p < t + THREAD_SIZE - size;
-}
+	printk("%sCall Trace:\n", log_lvl);
 
-unsigned long
-print_context_stack(struct task_struct *task,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data,
-		unsigned long *end, int *graph)
-{
-	struct stack_frame *frame = (struct stack_frame *)bp;
+	unwind_start(&state, task, regs, stack);
 
 	/*
-	 * If we overflowed the stack into a guard page, jump back to the
-	 * bottom of the usable stack.
+	 * Iterate through the stacks, starting with the current stack pointer.
+	 * Each stack has a pointer to the next one.
+	 *
+	 * x86-64 can have several stacks:
+	 * - task stack
+	 * - interrupt stack
+	 * - HW exception stacks (double fault, nmi, debug, mce)
+	 *
+	 * x86-32 can have up to three stacks:
+	 * - task stack
+	 * - softirq stack
+	 * - hardirq stack
 	 */
-	if ((unsigned long)task_stack_page(task) - (unsigned long)stack <
-	    PAGE_SIZE)
-		stack = (unsigned long *)task_stack_page(task);
-
-	while (valid_stack_ptr(task, stack, sizeof(*stack), end)) {
-		unsigned long addr;
-
-		addr = *stack;
-		if (__kernel_text_address(addr)) {
-			if ((unsigned long) stack == bp + sizeof(long)) {
-				ops->address(data, addr, 1);
-				frame = frame->next_frame;
-				bp = (unsigned long) frame;
-			} else {
-				ops->address(data, addr, 0);
-			}
-			print_ftrace_graph_addr(addr, data, ops, task, graph);
-		}
-		stack++;
-	}
-	return bp;
-}
-EXPORT_SYMBOL_GPL(print_context_stack);
-
-unsigned long
-print_context_stack_bp(struct task_struct *task,
-		       unsigned long *stack, unsigned long bp,
-		       const struct stacktrace_ops *ops, void *data,
-		       unsigned long *end, int *graph)
-{
-	struct stack_frame *frame = (struct stack_frame *)bp;
-	unsigned long *ret_addr = &frame->return_address;
+	for (; stack; stack = stack_info.next_sp) {
+		const char *str_begin, *str_end;
 
-	while (valid_stack_ptr(task, ret_addr, sizeof(*ret_addr), end)) {
-		unsigned long addr = *ret_addr;
+		/*
+		 * If we overflowed the task stack into a guard page, jump back
+		 * to the bottom of the usable stack.
+		 */
+		if (task_stack_page(task) - (void *)stack < PAGE_SIZE)
+			stack = task_stack_page(task);
 
-		if (!__kernel_text_address(addr))
+		if (get_stack_info(stack, task, &stack_info, &visit_mask))
 			break;
 
-		if (ops->address(data, addr, 1))
-			break;
-		frame = frame->next_frame;
-		ret_addr = &frame->return_address;
-		print_ftrace_graph_addr(addr, data, ops, task, graph);
-	}
-
-	return (unsigned long)frame;
-}
-EXPORT_SYMBOL_GPL(print_context_stack_bp);
-
-static int print_trace_stack(void *data, char *name)
-{
-	printk("%s <%s> ", (char *)data, name);
-	return 0;
-}
-
-/*
- * Print one address/symbol entries per line.
- */
-static int print_trace_address(void *data, unsigned long addr, int reliable)
-{
-	touch_nmi_watchdog();
-	printk_stack_address(addr, reliable, data);
-	return 0;
-}
-
-static const struct stacktrace_ops print_trace_ops = {
-	.stack			= print_trace_stack,
-	.address		= print_trace_address,
-	.walk_stack		= print_context_stack,
-};
-
-void
-show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl)
-{
-	printk("%sCall Trace:\n", log_lvl);
-	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
-}
+		stack_type_str(stack_info.type, &str_begin, &str_end);
+		if (str_begin)
+			printk("%s <%s> ", log_lvl, str_begin);
+
+		/*
+		 * Scan the stack, printing any text addresses we find.  At the
+		 * same time, follow proper stack frames with the unwinder.
+		 *
+		 * Addresses found during the scan which are not reported by
+		 * the unwinder are considered to be additional clues which are
+		 * sometimes useful for debugging and are prefixed with '?'.
+		 * This also serves as a failsafe option in case the unwinder
+		 * goes off in the weeds.
+		 */
+		for (; stack < stack_info.end; stack++) {
+			unsigned long real_addr;
+			int reliable = 0;
+			unsigned long addr = *stack;
+			unsigned long *ret_addr_p =
+				unwind_get_return_address_ptr(&state);
+
+			if (!__kernel_text_address(addr))
+				continue;
+
+			if (stack == ret_addr_p)
+				reliable = 1;
+
+			/*
+			 * When function graph tracing is enabled for a
+			 * function, its return address on the stack is
+			 * replaced with the address of an ftrace handler
+			 * (return_to_handler).  In that case, before printing
+			 * the "real" address, we want to print the handler
+			 * address as an "unreliable" hint that function graph
+			 * tracing was involved.
+			 */
+			real_addr = ftrace_graph_ret_addr(task, &graph_idx,
+							  addr, stack);
+			if (real_addr != addr)
+				printk_stack_address(addr, 0, log_lvl);
+			printk_stack_address(real_addr, reliable, log_lvl);
+
+			if (!reliable)
+				continue;
+
+			/*
+			 * Get the next frame from the unwinder.  No need to
+			 * check for an error: if anything goes wrong, the rest
+			 * of the addresses will just be printed as unreliable.
+			 */
+			unwind_next_frame(&state);
+		}
 
-void show_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp)
-{
-	show_trace_log_lvl(task, regs, stack, bp, "");
+		if (str_end)
+			printk("%s <%s> ", log_lvl, str_end);
+	}
 }
 
 void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	unsigned long bp = 0;
-	unsigned long stack;
+	task = task ? : current;
 
 	/*
 	 * Stack frames below this one aren't interesting.  Don't show them
 	 * if we're printing for %current.
 	 */
-	if (!sp && (!task || task == current)) {
-		sp = &stack;
-		bp = stack_frame(current, NULL);
-	}
+	if (!sp && task == current)
+		sp = get_stack_pointer(current, NULL);
 
-	show_stack_log_lvl(task, NULL, sp, bp, "");
+	show_stack_log_lvl(task, NULL, sp, "");
 }
 
 void show_stack_regs(struct pt_regs *regs)
 {
-	show_stack_log_lvl(current, regs, (unsigned long *)regs->sp, regs->bp, "");
+	show_stack_log_lvl(current, regs, NULL, "");
 }
 
 static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 0967571..06eb322 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -16,93 +16,121 @@
 
 #include <asm/stacktrace.h>
 
-static void *is_irq_stack(void *p, void *irq)
+void stack_type_str(enum stack_type type, const char **begin, const char **end)
 {
-	if (p < irq || p >= (irq + THREAD_SIZE))
-		return NULL;
-	return irq + THREAD_SIZE;
+	switch (type) {
+	case STACK_TYPE_IRQ:
+	case STACK_TYPE_SOFTIRQ:
+		*begin = "IRQ";
+		*end   = "EOI";
+		break;
+	default:
+		*begin = NULL;
+		*end   = NULL;
+	}
 }
 
-
-static void *is_hardirq_stack(unsigned long *stack, int cpu)
+static bool in_hardirq_stack(unsigned long *stack, struct stack_info *info)
 {
-	void *irq = per_cpu(hardirq_stack, cpu);
+	unsigned long *begin = (unsigned long *)this_cpu_read(hardirq_stack);
+	unsigned long *end   = begin + (THREAD_SIZE / sizeof(long));
 
-	return is_irq_stack(stack, irq);
-}
+	/*
+	 * This is a software stack, so 'end' can be a valid stack pointer.
+	 * It just means the stack is empty.
+	 */
+	if (stack < begin || stack > end)
+		return false;
 
-static void *is_softirq_stack(unsigned long *stack, int cpu)
-{
-	void *irq = per_cpu(softirq_stack, cpu);
+	info->type	= STACK_TYPE_IRQ;
+	info->begin	= begin;
+	info->end	= end;
 
-	return is_irq_stack(stack, irq);
+	/*
+	 * See irq_32.c -- the next stack pointer is stored at the beginning of
+	 * the stack.
+	 */
+	info->next_sp	= (unsigned long *)*begin;
+
+	return true;
 }
 
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data)
+static bool in_softirq_stack(unsigned long *stack, struct stack_info *info)
 {
-	const unsigned cpu = get_cpu();
-	int graph = 0;
-	u32 *prev_esp;
+	unsigned long *begin = (unsigned long *)this_cpu_read(softirq_stack);
+	unsigned long *end   = begin + (THREAD_SIZE / sizeof(long));
 
-	if (!task)
-		task = current;
+	/*
+	 * This is a software stack, so 'end' can be a valid stack pointer.
+	 * It just means the stack is empty.
+	 */
+	if (stack < begin || stack > end)
+		return false;
 
-	if (!stack) {
-		unsigned long dummy;
+	info->type	= STACK_TYPE_SOFTIRQ;
+	info->begin	= begin;
+	info->end	= end;
 
-		stack = &dummy;
-		if (task != current)
-			stack = (unsigned long *)task->thread.sp;
-	}
+	/*
+	 * The next stack pointer is stored at the beginning of the stack.
+	 * See irq_32.c.
+	 */
+	info->next_sp	= (unsigned long *)*begin;
 
-	if (!bp)
-		bp = stack_frame(task, regs);
+	return true;
+}
 
-	for (;;) {
-		void *end_stack;
+int get_stack_info(unsigned long *stack, struct task_struct *task,
+		   struct stack_info *info, unsigned long *visit_mask)
+{
+	if (!stack)
+		goto unknown;
 
-		end_stack = is_hardirq_stack(stack, cpu);
-		if (!end_stack)
-			end_stack = is_softirq_stack(stack, cpu);
+	task = task ? : current;
 
-		bp = ops->walk_stack(task, stack, bp, ops, data,
-				     end_stack, &graph);
+	if (in_task_stack(stack, task, info))
+		goto recursion_check;
 
-		/* Stop if not on irq stack */
-		if (!end_stack)
-			break;
+	if (task != current)
+		goto unknown;
 
-		/* The previous esp is saved on the bottom of the stack */
-		prev_esp = (u32 *)(end_stack - THREAD_SIZE);
-		stack = (unsigned long *)*prev_esp;
-		if (!stack)
-			break;
+	if (in_hardirq_stack(stack, info))
+		goto recursion_check;
 
-		if (ops->stack(data, "IRQ") < 0)
-			break;
-		touch_nmi_watchdog();
+	if (in_softirq_stack(stack, info))
+		goto recursion_check;
+
+	goto unknown;
+
+recursion_check:
+	/*
+	 * Make sure we don't iterate through any given stack more than once.
+	 * If it comes up a second time then there's something wrong going on:
+	 * just break out and report an unknown stack type.
+	 */
+	if (visit_mask) {
+		if (*visit_mask & (1UL << info->type))
+			goto unknown;
+		*visit_mask |= 1UL << info->type;
 	}
-	put_cpu();
+
+	return 0;
+
+unknown:
+	info->type = STACK_TYPE_UNKNOWN;
+	return -EINVAL;
 }
-EXPORT_SYMBOL(dump_trace);
 
-void
-show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *sp, unsigned long bp, char *log_lvl)
+void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+			unsigned long *sp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
 
-	if (sp == NULL) {
-		if (regs)
-			sp = (unsigned long *)regs->sp;
-		else if (task)
-			sp = (unsigned long *)task->thread.sp;
-		else
-			sp = (unsigned long *)&sp;
-	}
+	if (!try_get_task_stack(task))
+		return;
+
+	sp = sp ? : get_stack_pointer(task, regs);
 
 	stack = sp;
 	for (i = 0; i < kstack_depth_to_print; i++) {
@@ -117,7 +145,9 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		touch_nmi_watchdog();
 	}
 	pr_cont("\n");
-	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
+	show_trace_log_lvl(task, regs, sp, log_lvl);
+
+	put_task_stack(task);
 }
 
 
@@ -139,7 +169,7 @@ void show_regs(struct pt_regs *regs)
 		u8 *ip;
 
 		pr_emerg("Stack:\n");
-		show_stack_log_lvl(NULL, regs, &regs->sp, 0, KERN_EMERG);
+		show_stack_log_lvl(current, regs, NULL, KERN_EMERG);
 
 		pr_emerg("Code:");
 
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 9ee4520..36cf1a4 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -16,261 +16,145 @@
 
 #include <asm/stacktrace.h>
 
+static char *exception_stack_names[N_EXCEPTION_STACKS] = {
+		[ DOUBLEFAULT_STACK-1	]	= "#DF",
+		[ NMI_STACK-1		]	= "NMI",
+		[ DEBUG_STACK-1		]	= "#DB",
+		[ MCE_STACK-1		]	= "#MC",
+};
 
-#define N_EXCEPTION_STACKS_END \
-		(N_EXCEPTION_STACKS + DEBUG_STKSZ/EXCEPTION_STKSZ - 2)
-
-static char x86_stack_ids[][8] = {
-		[ DEBUG_STACK-1			]	= "#DB",
-		[ NMI_STACK-1			]	= "NMI",
-		[ DOUBLEFAULT_STACK-1		]	= "#DF",
-		[ MCE_STACK-1			]	= "#MC",
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
-		[ N_EXCEPTION_STACKS ...
-		  N_EXCEPTION_STACKS_END	]	= "#DB[?]"
-#endif
+static unsigned long exception_stack_sizes[N_EXCEPTION_STACKS] = {
+	[0 ... N_EXCEPTION_STACKS - 1]		= EXCEPTION_STKSZ,
+	[DEBUG_STACK - 1]			= DEBUG_STKSZ
 };
 
-static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					 unsigned *usedp, char **idp)
+void stack_type_str(enum stack_type type, const char **begin, const char **end)
 {
-	unsigned k;
-
-	/*
-	 * Iterate over all exception stacks, and figure out whether
-	 * 'stack' is in one of them:
-	 */
-	for (k = 0; k < N_EXCEPTION_STACKS; k++) {
-		unsigned long end = per_cpu(orig_ist, cpu).ist[k];
-		/*
-		 * Is 'stack' above this exception frame's end?
-		 * If yes then skip to the next frame.
-		 */
-		if (stack >= end)
-			continue;
-		/*
-		 * Is 'stack' above this exception frame's start address?
-		 * If yes then we found the right frame.
-		 */
-		if (stack >= end - EXCEPTION_STKSZ) {
-			/*
-			 * Make sure we only iterate through an exception
-			 * stack once. If it comes up for the second time
-			 * then there's something wrong going on - just
-			 * break out and return NULL:
-			 */
-			if (*usedp & (1U << k))
-				break;
-			*usedp |= 1U << k;
-			*idp = x86_stack_ids[k];
-			return (unsigned long *)end;
-		}
-		/*
-		 * If this is a debug stack, and if it has a larger size than
-		 * the usual exception stacks, then 'stack' might still
-		 * be within the lower portion of the debug stack:
-		 */
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
-		if (k == DEBUG_STACK - 1 && stack >= end - DEBUG_STKSZ) {
-			unsigned j = N_EXCEPTION_STACKS - 1;
-
-			/*
-			 * Black magic. A large debug stack is composed of
-			 * multiple exception stack entries, which we
-			 * iterate through now. Dont look:
-			 */
-			do {
-				++j;
-				end -= EXCEPTION_STKSZ;
-				x86_stack_ids[j][4] = '1' +
-						(j - N_EXCEPTION_STACKS);
-			} while (stack < end - EXCEPTION_STKSZ);
-			if (*usedp & (1U << j))
-				break;
-			*usedp |= 1U << j;
-			*idp = x86_stack_ids[j];
-			return (unsigned long *)end;
-		}
-#endif
+	BUILD_BUG_ON(N_EXCEPTION_STACKS != 4);
+
+	switch (type) {
+	case STACK_TYPE_IRQ:
+		*begin = "IRQ";
+		*end   = "EOI";
+		break;
+	case STACK_TYPE_EXCEPTION ... STACK_TYPE_EXCEPTION_LAST:
+		*begin = exception_stack_names[type - STACK_TYPE_EXCEPTION];
+		*end   = "EOE";
+		break;
+	default:
+		*begin = NULL;
+		*end   = NULL;
 	}
-	return NULL;
 }
 
-static inline int
-in_irq_stack(unsigned long *stack, unsigned long *irq_stack,
-	     unsigned long *irq_stack_end)
+static bool in_exception_stack(unsigned long *stack, struct stack_info *info)
 {
-	return (stack >= irq_stack && stack < irq_stack_end);
-}
-
-static const unsigned long irq_stack_size =
-	(IRQ_STACK_SIZE - 64) / sizeof(unsigned long);
-
-enum stack_type {
-	STACK_IS_UNKNOWN,
-	STACK_IS_NORMAL,
-	STACK_IS_EXCEPTION,
-	STACK_IS_IRQ,
-};
-
-static enum stack_type
-analyze_stack(int cpu, struct task_struct *task, unsigned long *stack,
-	      unsigned long **stack_end, unsigned long *irq_stack,
-	      unsigned *used, char **id)
-{
-	unsigned long addr;
+	unsigned long *begin, *end;
+	struct pt_regs *regs;
+	unsigned k;
 
-	addr = ((unsigned long)stack & (~(THREAD_SIZE - 1)));
-	if ((unsigned long)task_stack_page(task) == addr)
-		return STACK_IS_NORMAL;
+	BUILD_BUG_ON(N_EXCEPTION_STACKS != 4);
 
-	*stack_end = in_exception_stack(cpu, (unsigned long)stack,
-					used, id);
-	if (*stack_end)
-		return STACK_IS_EXCEPTION;
+	for (k = 0; k < N_EXCEPTION_STACKS; k++) {
+		end   = (unsigned long *)raw_cpu_ptr(&orig_ist)->ist[k];
+		begin = end - (exception_stack_sizes[k] / sizeof(long));
+		regs  = (struct pt_regs *)end - 1;
 
-	if (!irq_stack)
-		return STACK_IS_NORMAL;
+		if (stack < begin || stack >= end)
+			continue;
 
-	*stack_end = irq_stack;
-	irq_stack = irq_stack - irq_stack_size;
+		info->type	= STACK_TYPE_EXCEPTION + k;
+		info->begin	= begin;
+		info->end	= end;
+		info->next_sp	= (unsigned long *)regs->sp;
 
-	if (in_irq_stack(stack, irq_stack, *stack_end))
-		return STACK_IS_IRQ;
+		return true;
+	}
 
-	return STACK_IS_UNKNOWN;
+	return false;
 }
 
-/*
- * x86-64 can have up to three kernel stacks:
- * process stack
- * interrupt stack
- * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
- */
-
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
-		const struct stacktrace_ops *ops, void *data)
+static bool in_irq_stack(unsigned long *stack, struct stack_info *info)
 {
-	const unsigned cpu = get_cpu();
-	unsigned long *irq_stack = (unsigned long *)per_cpu(irq_stack_ptr, cpu);
-	unsigned long dummy;
-	unsigned used = 0;
-	int graph = 0;
-	int done = 0;
-
-	if (!task)
-		task = current;
-
-	if (!stack) {
-		if (regs)
-			stack = (unsigned long *)regs->sp;
-		else if (task != current)
-			stack = (unsigned long *)task->thread.sp;
-		else
-			stack = &dummy;
-	}
+	unsigned long *end   = (unsigned long *)this_cpu_read(irq_stack_ptr);
+	unsigned long *begin = end - (IRQ_STACK_SIZE / sizeof(long));
 
-	if (!bp)
-		bp = stack_frame(task, regs);
 	/*
-	 * Print function call entries in all stacks, starting at the
-	 * current stack address. If the stacks consist of nested
-	 * exceptions
+	 * This is a software stack, so 'end' can be a valid stack pointer.
+	 * It just means the stack is empty.
 	 */
-	while (!done) {
-		unsigned long *stack_end;
-		enum stack_type stype;
-		char *id;
+	if (stack < begin || stack > end)
+		return false;
 
-		stype = analyze_stack(cpu, task, stack, &stack_end,
-				      irq_stack, &used, &id);
+	info->type	= STACK_TYPE_IRQ;
+	info->begin	= begin;
+	info->end	= end;
 
-		/* Default finish unless specified to continue */
-		done = 1;
+	/*
+	 * The next stack pointer is the first thing pushed by the entry code
+	 * after switching to the irq stack.
+	 */
+	info->next_sp = (unsigned long *)*(end - 1);
 
-		switch (stype) {
+	return true;
+}
 
-		/* Break out early if we are on the thread stack */
-		case STACK_IS_NORMAL:
-			break;
+int get_stack_info(unsigned long *stack, struct task_struct *task,
+		   struct stack_info *info, unsigned long *visit_mask)
+{
+	if (!stack)
+		goto unknown;
 
-		case STACK_IS_EXCEPTION:
+	task = task ? : current;
 
-			if (ops->stack(data, id) < 0)
-				break;
+	if (in_task_stack(stack, task, info))
+		goto recursion_check;
 
-			bp = ops->walk_stack(task, stack, bp, ops,
-					     data, stack_end, &graph);
-			ops->stack(data, "<EOE>");
-			/*
-			 * We link to the next stack via the
-			 * second-to-last pointer (index -2 to end) in the
-			 * exception stack:
-			 */
-			stack = (unsigned long *) stack_end[-2];
-			done = 0;
-			break;
+	if (task != current)
+		goto unknown;
 
-		case STACK_IS_IRQ:
+	if (in_exception_stack(stack, info))
+		goto recursion_check;
 
-			if (ops->stack(data, "IRQ") < 0)
-				break;
-			bp = ops->walk_stack(task, stack, bp,
-				     ops, data, stack_end, &graph);
-			/*
-			 * We link to the next stack (which would be
-			 * the process stack normally) the last
-			 * pointer (index -1 to end) in the IRQ stack:
-			 */
-			stack = (unsigned long *) (stack_end[-1]);
-			irq_stack = NULL;
-			ops->stack(data, "EOI");
-			done = 0;
-			break;
+	if (in_irq_stack(stack, info))
+		goto recursion_check;
 
-		case STACK_IS_UNKNOWN:
-			ops->stack(data, "UNK");
-			break;
-		}
-	}
+	goto unknown;
 
+recursion_check:
 	/*
-	 * This handles the process stack:
+	 * Make sure we don't iterate through any given stack more than once.
+	 * If it comes up a second time then there's something wrong going on:
+	 * just break out and report an unknown stack type.
 	 */
-	bp = ops->walk_stack(task, stack, bp, ops, data, NULL, &graph);
-	put_cpu();
+	if (visit_mask) {
+		if (*visit_mask & (1UL << info->type))
+			goto unknown;
+		*visit_mask |= 1UL << info->type;
+	}
+
+	return 0;
+
+unknown:
+	info->type = STACK_TYPE_UNKNOWN;
+	return -EINVAL;
 }
-EXPORT_SYMBOL(dump_trace);
 
-void
-show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *sp, unsigned long bp, char *log_lvl)
+void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+			unsigned long *sp, char *log_lvl)
 {
 	unsigned long *irq_stack_end;
 	unsigned long *irq_stack;
 	unsigned long *stack;
-	int cpu;
 	int i;
 
-	preempt_disable();
-	cpu = smp_processor_id();
+	if (!try_get_task_stack(task))
+		return;
 
-	irq_stack_end	= (unsigned long *)(per_cpu(irq_stack_ptr, cpu));
-	irq_stack	= (unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE);
+	irq_stack_end = (unsigned long *)this_cpu_read(irq_stack_ptr);
+	irq_stack     = irq_stack_end - (IRQ_STACK_SIZE / sizeof(long));
 
-	/*
-	 * Debugging aid: "show_stack(NULL, NULL);" prints the
-	 * back trace for this cpu:
-	 */
-	if (sp == NULL) {
-		if (regs)
-			sp = (unsigned long *)regs->sp;
-		else if (task)
-			sp = (unsigned long *)task->thread.sp;
-		else
-			sp = (unsigned long *)&sp;
-	}
+	sp = sp ? : get_stack_pointer(task, regs);
 
 	stack = sp;
 	for (i = 0; i < kstack_depth_to_print; i++) {
@@ -299,18 +183,17 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		stack++;
 		touch_nmi_watchdog();
 	}
-	preempt_enable();
 
 	pr_cont("\n");
-	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
+	show_trace_log_lvl(task, regs, sp, log_lvl);
+
+	put_task_stack(task);
 }
 
 void show_regs(struct pt_regs *regs)
 {
 	int i;
-	unsigned long sp;
 
-	sp = regs->sp;
 	show_regs_print_info(KERN_DEFAULT);
 	__show_regs(regs, 1);
 
@@ -325,8 +208,7 @@ void show_regs(struct pt_regs *regs)
 		u8 *ip;
 
 		printk(KERN_DEFAULT "Stack:\n");
-		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
-				   0, KERN_DEFAULT);
+		show_stack_log_lvl(current, regs, NULL, KERN_DEFAULT);
 
 		printk(KERN_DEFAULT "Code: ");
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 621b501..b85fe5f 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -40,8 +40,10 @@
  * user can e.g. boot the original kernel with mem=1G while still booting the
  * next kernel with full memory.
  */
-struct e820map e820;
-struct e820map e820_saved;
+static struct e820map initial_e820  __initdata;
+static struct e820map initial_e820_saved  __initdata;
+struct e820map *e820 __refdata = &initial_e820;
+struct e820map *e820_saved __refdata = &initial_e820_saved;
 
 /* For PCI or other memory-mapped resources */
 unsigned long pci_mem_start = 0xaeedbabe;
@@ -58,8 +60,8 @@ e820_any_mapped(u64 start, u64 end, unsigned type)
 {
 	int i;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 
 		if (type && ei->type != type)
 			continue;
@@ -81,8 +83,8 @@ int __init e820_all_mapped(u64 start, u64 end, unsigned type)
 {
 	int i;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 
 		if (type && ei->type != type)
 			continue;
@@ -128,7 +130,7 @@ static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
 
 void __init e820_add_region(u64 start, u64 size, int type)
 {
-	__e820_add_region(&e820, start, size, type);
+	__e820_add_region(e820, start, size, type);
 }
 
 static void __init e820_print_type(u32 type)
@@ -164,12 +166,12 @@ void __init e820_print_map(char *who)
 {
 	int i;
 
-	for (i = 0; i < e820.nr_map; i++) {
+	for (i = 0; i < e820->nr_map; i++) {
 		printk(KERN_INFO "%s: [mem %#018Lx-%#018Lx] ", who,
-		       (unsigned long long) e820.map[i].addr,
+		       (unsigned long long) e820->map[i].addr,
 		       (unsigned long long)
-		       (e820.map[i].addr + e820.map[i].size - 1));
-		e820_print_type(e820.map[i].type);
+		       (e820->map[i].addr + e820->map[i].size - 1));
+		e820_print_type(e820->map[i].type);
 		printk(KERN_CONT "\n");
 	}
 }
@@ -348,7 +350,7 @@ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map,
 		 * continue building up new bios map based on this
 		 * information
 		 */
-		if (current_type != last_type || current_type == E820_PRAM) {
+		if (current_type != last_type) {
 			if (last_type != 0)	 {
 				new_bios[new_bios_entry].size =
 					change_point[chgidx]->addr - last_addr;
@@ -388,11 +390,11 @@ static int __init __append_e820_map(struct e820entry *biosmap, int nr_map)
 	while (nr_map) {
 		u64 start = biosmap->addr;
 		u64 size = biosmap->size;
-		u64 end = start + size;
+		u64 end = start + size - 1;
 		u32 type = biosmap->type;
 
 		/* Overflow in 64 bits? Ignore the memory map. */
-		if (start > end)
+		if (start > end && likely(size))
 			return -1;
 
 		e820_add_region(start, size, type);
@@ -493,13 +495,13 @@ static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
 u64 __init e820_update_range(u64 start, u64 size, unsigned old_type,
 			     unsigned new_type)
 {
-	return __e820_update_range(&e820, start, size, old_type, new_type);
+	return __e820_update_range(e820, start, size, old_type, new_type);
 }
 
 static u64 __init e820_update_range_saved(u64 start, u64 size,
 					  unsigned old_type, unsigned new_type)
 {
-	return __e820_update_range(&e820_saved, start, size, old_type,
+	return __e820_update_range(e820_saved, start, size, old_type,
 				     new_type);
 }
 
@@ -521,8 +523,8 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
 		e820_print_type(old_type);
 	printk(KERN_CONT "\n");
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 		u64 final_start, final_end;
 		u64 ei_end;
 
@@ -566,15 +568,15 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
 
 void __init update_e820(void)
 {
-	if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map))
+	if (sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map))
 		return;
 	printk(KERN_INFO "e820: modified physical RAM map:\n");
 	e820_print_map("modified");
 }
 static void __init update_e820_saved(void)
 {
-	sanitize_e820_map(e820_saved.map, ARRAY_SIZE(e820_saved.map),
-				&e820_saved.nr_map);
+	sanitize_e820_map(e820_saved->map, ARRAY_SIZE(e820_saved->map),
+				&e820_saved->nr_map);
 }
 #define MAX_GAP_END 0x100000000ull
 /*
@@ -584,14 +586,14 @@ __init int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize,
 		unsigned long start_addr, unsigned long long end_addr)
 {
 	unsigned long long last;
-	int i = e820.nr_map;
+	int i = e820->nr_map;
 	int found = 0;
 
 	last = (end_addr && end_addr < MAX_GAP_END) ? end_addr : MAX_GAP_END;
 
 	while (--i >= 0) {
-		unsigned long long start = e820.map[i].addr;
-		unsigned long long end = start + e820.map[i].size;
+		unsigned long long start = e820->map[i].addr;
+		unsigned long long end = start + e820->map[i].size;
 
 		if (end < start_addr)
 			continue;
@@ -649,6 +651,33 @@ __init void e820_setup_gap(void)
 	       gapstart, gapstart + gapsize - 1);
 }
 
+/*
+ * Called late during init, in free_initmem().
+ *
+ * Initial e820 and e820_saved are largish __initdata arrays.
+ * Copy them to (usually much smaller) dynamically allocated area.
+ * This is done after all tweaks we ever do to them:
+ * all functions which modify them are __init functions,
+ * they won't exist after this point.
+ */
+__init void e820_reallocate_tables(void)
+{
+	struct e820map *n;
+	int size;
+
+	size = offsetof(struct e820map, map) + sizeof(struct e820entry) * e820->nr_map;
+	n = kmalloc(size, GFP_KERNEL);
+	BUG_ON(!n);
+	memcpy(n, e820, size);
+	e820 = n;
+
+	size = offsetof(struct e820map, map) + sizeof(struct e820entry) * e820_saved->nr_map;
+	n = kmalloc(size, GFP_KERNEL);
+	BUG_ON(!n);
+	memcpy(n, e820_saved, size);
+	e820_saved = n;
+}
+
 /**
  * Because of the size limitation of struct boot_params, only first
  * 128 E820 memory entries are passed to kernel via
@@ -665,7 +694,7 @@ void __init parse_e820_ext(u64 phys_addr, u32 data_len)
 	entries = sdata->len / sizeof(struct e820entry);
 	extmap = (struct e820entry *)(sdata->data);
 	__append_e820_map(extmap, entries);
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
 	early_memunmap(sdata, data_len);
 	printk(KERN_INFO "e820: extended physical RAM map:\n");
 	e820_print_map("extended");
@@ -686,8 +715,8 @@ void __init e820_mark_nosave_regions(unsigned long limit_pfn)
 	int i;
 	unsigned long pfn = 0;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 
 		if (pfn < PFN_UP(ei->addr))
 			register_nosave_region(pfn, PFN_UP(ei->addr));
@@ -712,8 +741,8 @@ static int __init e820_mark_nvs_memory(void)
 {
 	int i;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 
 		if (ei->type == E820_NVS)
 			acpi_nvs_register(ei->addr, ei->size);
@@ -754,22 +783,18 @@ u64 __init early_reserve_e820(u64 size, u64 align)
 /*
  * Find the highest page frame number we have available
  */
-static unsigned long __init e820_end_pfn(unsigned long limit_pfn)
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
 {
 	int i;
 	unsigned long last_pfn = 0;
 	unsigned long max_arch_pfn = MAX_ARCH_PFN;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 		unsigned long start_pfn;
 		unsigned long end_pfn;
 
-		/*
-		 * Persistent memory is accounted as ram for purposes of
-		 * establishing max_pfn and mem_map.
-		 */
-		if (ei->type != E820_RAM && ei->type != E820_PRAM)
+		if (ei->type != type)
 			continue;
 
 		start_pfn = ei->addr >> PAGE_SHIFT;
@@ -794,15 +819,15 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn)
 }
 unsigned long __init e820_end_of_ram_pfn(void)
 {
-	return e820_end_pfn(MAX_ARCH_PFN);
+	return e820_end_pfn(MAX_ARCH_PFN, E820_RAM);
 }
 
 unsigned long __init e820_end_of_low_ram_pfn(void)
 {
-	return e820_end_pfn(1UL << (32-PAGE_SHIFT));
+	return e820_end_pfn(1UL << (32 - PAGE_SHIFT), E820_RAM);
 }
 
-static void early_panic(char *msg)
+static void __init early_panic(char *msg)
 {
 	early_printk(msg);
 	panic(msg);
@@ -856,7 +881,7 @@ static int __init parse_memmap_one(char *p)
 		 */
 		saved_max_pfn = e820_end_of_ram_pfn();
 #endif
-		e820.nr_map = 0;
+		e820->nr_map = 0;
 		userdef = 1;
 		return 0;
 	}
@@ -903,8 +928,8 @@ early_param("memmap", parse_memmap_opt);
 void __init finish_e820_parsing(void)
 {
 	if (userdef) {
-		if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map),
-					&e820.nr_map) < 0)
+		if (sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map),
+					&e820->nr_map) < 0)
 			early_panic("Invalid user supplied memory map");
 
 		printk(KERN_INFO "e820: user-defined physical RAM map:\n");
@@ -912,7 +937,7 @@ void __init finish_e820_parsing(void)
 	}
 }
 
-static const char *e820_type_to_string(int e820_type)
+static const char *__init e820_type_to_string(int e820_type)
 {
 	switch (e820_type) {
 	case E820_RESERVED_KERN:
@@ -926,7 +951,7 @@ static const char *e820_type_to_string(int e820_type)
 	}
 }
 
-static unsigned long e820_type_to_iomem_type(int e820_type)
+static unsigned long __init e820_type_to_iomem_type(int e820_type)
 {
 	switch (e820_type) {
 	case E820_RESERVED_KERN:
@@ -942,7 +967,7 @@ static unsigned long e820_type_to_iomem_type(int e820_type)
 	}
 }
 
-static unsigned long e820_type_to_iores_desc(int e820_type)
+static unsigned long __init e820_type_to_iores_desc(int e820_type)
 {
 	switch (e820_type) {
 	case E820_ACPI:
@@ -961,7 +986,7 @@ static unsigned long e820_type_to_iores_desc(int e820_type)
 	}
 }
 
-static bool do_mark_busy(u32 type, struct resource *res)
+static bool __init do_mark_busy(u32 type, struct resource *res)
 {
 	/* this is the legacy bios/dos rom-shadow + mmio region */
 	if (res->start < (1ULL<<20))
@@ -991,35 +1016,35 @@ void __init e820_reserve_resources(void)
 	struct resource *res;
 	u64 end;
 
-	res = alloc_bootmem(sizeof(struct resource) * e820.nr_map);
+	res = alloc_bootmem(sizeof(struct resource) * e820->nr_map);
 	e820_res = res;
-	for (i = 0; i < e820.nr_map; i++) {
-		end = e820.map[i].addr + e820.map[i].size - 1;
+	for (i = 0; i < e820->nr_map; i++) {
+		end = e820->map[i].addr + e820->map[i].size - 1;
 		if (end != (resource_size_t)end) {
 			res++;
 			continue;
 		}
-		res->name = e820_type_to_string(e820.map[i].type);
-		res->start = e820.map[i].addr;
+		res->name = e820_type_to_string(e820->map[i].type);
+		res->start = e820->map[i].addr;
 		res->end = end;
 
-		res->flags = e820_type_to_iomem_type(e820.map[i].type);
-		res->desc = e820_type_to_iores_desc(e820.map[i].type);
+		res->flags = e820_type_to_iomem_type(e820->map[i].type);
+		res->desc = e820_type_to_iores_desc(e820->map[i].type);
 
 		/*
 		 * don't register the region that could be conflicted with
 		 * pci device BAR resource and insert them later in
 		 * pcibios_resource_survey()
 		 */
-		if (do_mark_busy(e820.map[i].type, res)) {
+		if (do_mark_busy(e820->map[i].type, res)) {
 			res->flags |= IORESOURCE_BUSY;
 			insert_resource(&iomem_resource, res);
 		}
 		res++;
 	}
 
-	for (i = 0; i < e820_saved.nr_map; i++) {
-		struct e820entry *entry = &e820_saved.map[i];
+	for (i = 0; i < e820_saved->nr_map; i++) {
+		struct e820entry *entry = &e820_saved->map[i];
 		firmware_map_add_early(entry->addr,
 			entry->addr + entry->size,
 			e820_type_to_string(entry->type));
@@ -1027,7 +1052,7 @@ void __init e820_reserve_resources(void)
 }
 
 /* How much should we pad RAM ending depending on where it is? */
-static unsigned long ram_alignment(resource_size_t pos)
+static unsigned long __init ram_alignment(resource_size_t pos)
 {
 	unsigned long mb = pos >> 20;
 
@@ -1051,7 +1076,7 @@ void __init e820_reserve_resources_late(void)
 	struct resource *res;
 
 	res = e820_res;
-	for (i = 0; i < e820.nr_map; i++) {
+	for (i = 0; i < e820->nr_map; i++) {
 		if (!res->parent && res->end)
 			insert_resource_expand_to_fit(&iomem_resource, res);
 		res++;
@@ -1061,8 +1086,8 @@ void __init e820_reserve_resources_late(void)
 	 * Try to bump up RAM regions to reasonable boundaries to
 	 * avoid stolen RAM:
 	 */
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *entry = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *entry = &e820->map[i];
 		u64 start, end;
 
 		if (entry->type != E820_RAM)
@@ -1110,7 +1135,7 @@ char *__init default_machine_specific_memory_setup(void)
 			who = "BIOS-e801";
 		}
 
-		e820.nr_map = 0;
+		e820->nr_map = 0;
 		e820_add_region(0, LOWMEMSIZE(), E820_RAM);
 		e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
 	}
@@ -1124,7 +1149,7 @@ void __init setup_memory_map(void)
 	char *who;
 
 	who = x86_init.resources.memory_setup();
-	memcpy(&e820_saved, &e820, sizeof(struct e820map));
+	memcpy(e820_saved, e820, sizeof(struct e820map));
 	printk(KERN_INFO "e820: BIOS-provided physical RAM map:\n");
 	e820_print_map(who);
 }
@@ -1141,8 +1166,8 @@ void __init memblock_x86_fill(void)
 	 */
 	memblock_allow_resize();
 
-	for (i = 0; i < e820.nr_map; i++) {
-		struct e820entry *ei = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		struct e820entry *ei = &e820->map[i];
 
 		end = ei->addr + ei->size;
 		if (end != (resource_size_t)end)
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index de7501e..6a08e25 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -317,16 +317,11 @@ static phys_addr_t __init i85x_stolen_base(int num, int slot, int func,
 static phys_addr_t __init i865_stolen_base(int num, int slot, int func,
 					   size_t stolen_size)
 {
-	u16 toud;
+	u16 toud = 0;
 
-	/*
-	 * FIXME is the graphics stolen memory region
-	 * always at TOUD? Ie. is it always the last
-	 * one to be allocated by the BIOS?
-	 */
 	toud = read_pci_config_16(0, 0, 0, I865_TOUD);
 
-	return (phys_addr_t)toud << 16;
+	return (phys_addr_t)(toud << 16) + i845_tseg_size();
 }
 
 static phys_addr_t __init gen3_stolen_base(int num, int slot, int func,
@@ -512,8 +507,7 @@ static const struct pci_device_id intel_early_ids[] __initconst = {
 	INTEL_I915GM_IDS(&gen3_early_ops),
 	INTEL_I945G_IDS(&gen3_early_ops),
 	INTEL_I945GM_IDS(&gen3_early_ops),
-	INTEL_VLV_M_IDS(&gen6_early_ops),
-	INTEL_VLV_D_IDS(&gen6_early_ops),
+	INTEL_VLV_IDS(&gen6_early_ops),
 	INTEL_PINEVIEW_IDS(&gen3_early_ops),
 	INTEL_I965G_IDS(&gen3_early_ops),
 	INTEL_G33_IDS(&gen3_early_ops),
@@ -526,10 +520,8 @@ static const struct pci_device_id intel_early_ids[] __initconst = {
 	INTEL_SNB_M_IDS(&gen6_early_ops),
 	INTEL_IVB_M_IDS(&gen6_early_ops),
 	INTEL_IVB_D_IDS(&gen6_early_ops),
-	INTEL_HSW_D_IDS(&gen6_early_ops),
-	INTEL_HSW_M_IDS(&gen6_early_ops),
-	INTEL_BDW_M_IDS(&gen8_early_ops),
-	INTEL_BDW_D_IDS(&gen8_early_ops),
+	INTEL_HSW_IDS(&gen6_early_ops),
+	INTEL_BDW_IDS(&gen8_early_ops),
 	INTEL_CHV_IDS(&chv_early_ops),
 	INTEL_SKL_IDS(&gen9_early_ops),
 	INTEL_BXT_IDS(&gen9_early_ops),
@@ -555,7 +547,7 @@ intel_graphics_stolen(int num, int slot, int func,
 
 	/* Mark this space as reserved */
 	e820_add_region(base, size, E820_RESERVED);
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
 }
 
 static void __init intel_graphics_quirks(int num, int slot, int func)
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 3fc03a0..4700401 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -12,6 +12,7 @@
 #include <asm/traps.h>
 
 #include <linux/hardirq.h>
+#include <linux/pkeys.h>
 
 #define CREATE_TRACE_POINTS
 #include <asm/trace/fpu.h>
@@ -505,6 +506,9 @@ static inline void copy_init_fpstate_to_fpregs(void)
 		copy_kernel_to_fxregs(&init_fpstate.fxsave);
 	else
 		copy_kernel_to_fregs(&init_fpstate.fsave);
+
+	if (boot_cpu_has(X86_FEATURE_OSPKE))
+		copy_init_pkru_to_fpregs();
 }
 
 /*
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 93982ae..2f2b8c7 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -317,7 +317,6 @@ static void __init fpu__init_system_ctx_switch(void)
 	on_boot_cpu = 0;
 
 	WARN_ON_FPU(current->thread.fpu.fpstate_active);
-	current_thread_info()->status = 0;
 
 	if (boot_cpu_has(X86_FEATURE_XSAVEOPT) && eagerfpu != DISABLE)
 		eagerfpu = ENABLE;
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 01567aa..124aa5c 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -5,6 +5,7 @@
  */
 #include <linux/compat.h>
 #include <linux/cpu.h>
+#include <linux/mman.h>
 #include <linux/pkeys.h>
 
 #include <asm/fpu/api.h>
@@ -866,9 +867,10 @@ const void *get_xsave_field_ptr(int xsave_state)
 	return get_xsave_addr(&fpu->state.xsave, xsave_state);
 }
 
+#ifdef CONFIG_ARCH_HAS_PKEYS
+
 #define NR_VALID_PKRU_BITS (CONFIG_NR_PROTECTION_KEYS * 2)
 #define PKRU_VALID_MASK (NR_VALID_PKRU_BITS - 1)
-
 /*
  * This will go out and modify PKRU register to set the access
  * rights for @pkey to @init_val.
@@ -914,6 +916,7 @@ int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
 
 	return 0;
 }
+#endif /* ! CONFIG_ARCH_HAS_PKEYS */
 
 /*
  * This is similar to user_regset_copyout(), but will not add offset to
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index d036cfb..8639bb2 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -1029,7 +1029,7 @@ void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
 	}
 
 	if (ftrace_push_return_trace(old, self_addr, &trace.depth,
-		    frame_pointer) == -EBUSY) {
+				     frame_pointer, parent) == -EBUSY) {
 		*parent = old;
 		return;
 	}
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 6f8902b..5f40126 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -94,7 +94,7 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  */
 __HEAD
 ENTRY(startup_32)
-	movl pa(stack_start),%ecx
+	movl pa(initial_stack),%ecx
 	
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 		us to not reload segments */
@@ -286,7 +286,7 @@ num_subarch_entries = (. - subarch_entries) / 4
  * start_secondary().
  */
 ENTRY(start_cpu0)
-	movl stack_start, %ecx
+	movl initial_stack, %ecx
 	movl %ecx, %esp
 	jmp  *(initial_code)
 ENDPROC(start_cpu0)
@@ -307,7 +307,7 @@ ENTRY(startup_32_smp)
 	movl %eax,%es
 	movl %eax,%fs
 	movl %eax,%gs
-	movl pa(stack_start),%ecx
+	movl pa(initial_stack),%ecx
 	movl %eax,%ss
 	leal -__PAGE_OFFSET(%ecx),%esp
 
@@ -703,7 +703,7 @@ ENTRY(initial_page_table)
 
 .data
 .balign 4
-ENTRY(stack_start)
+ENTRY(initial_stack)
 	.long init_thread_union+THREAD_SIZE
 
 __INITRODATA
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 9f8efc9..c98a559 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -66,7 +66,7 @@ startup_64:
 	 */
 
 	/*
-	 * Setup stack for verify_cpu(). "-8" because stack_start is defined
+	 * Setup stack for verify_cpu(). "-8" because initial_stack is defined
 	 * this way, see below. Our best guess is a NULL ptr for stack
 	 * termination heuristics and we don't want to break anything which
 	 * might depend on it (kgdb, ...).
@@ -226,7 +226,7 @@ ENTRY(secondary_startup_64)
 	movq	%rax, %cr0
 
 	/* Setup a boot time stack */
-	movq stack_start(%rip), %rsp
+	movq initial_stack(%rip), %rsp
 
 	/* zero EFLAGS after setting rsp */
 	pushq $0
@@ -310,7 +310,7 @@ ENDPROC(secondary_startup_64)
  * start_secondary().
  */
 ENTRY(start_cpu0)
-	movq stack_start(%rip),%rsp
+	movq initial_stack(%rip),%rsp
 	movq	initial_code(%rip),%rax
 	pushq	$0		# fake return address to stop unwinder
 	pushq	$__KERNEL_CS	# set correct cs
@@ -319,17 +319,15 @@ ENTRY(start_cpu0)
 ENDPROC(start_cpu0)
 #endif
 
-	/* SMP bootup changes these two */
+	/* Both SMP bootup and ACPI suspend change these variables */
 	__REFDATA
 	.balign	8
 	GLOBAL(initial_code)
 	.quad	x86_64_start_kernel
 	GLOBAL(initial_gs)
 	.quad	INIT_PER_CPU_VAR(irq_stack_union)
-
-	GLOBAL(stack_start)
+	GLOBAL(initial_stack)
 	.quad  init_thread_union+THREAD_SIZE-8
-	.word  0
 	__FINITDATA
 
 bad_address:
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index c6dfd80..274fab9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -756,10 +756,104 @@ static void hpet_reserve_msi_timers(struct hpet_data *hd)
 /*
  * Clock source related code
  */
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
+/*
+ * Reading the HPET counter is a very slow operation. If a large number of
+ * CPUs are trying to access the HPET counter simultaneously, it can cause
+ * massive delay and slow down system performance dramatically. This may
+ * happen when HPET is the default clock source instead of TSC. For a
+ * really large system with hundreds of CPUs, the slowdown may be so
+ * severe that it may actually crash the system because of a NMI watchdog
+ * soft lockup, for example.
+ *
+ * If multiple CPUs are trying to access the HPET counter at the same time,
+ * we don't actually need to read the counter multiple times. Instead, the
+ * other CPUs can use the counter value read by the first CPU in the group.
+ *
+ * This special feature is only enabled on x86-64 systems. It is unlikely
+ * that 32-bit x86 systems will have enough CPUs to require this feature
+ * with its associated locking overhead. And we also need 64-bit atomic
+ * read.
+ *
+ * The lock and the hpet value are stored together and can be read in a
+ * single atomic 64-bit read. It is explicitly assumed that arch_spinlock_t
+ * is 32 bits in size.
+ */
+union hpet_lock {
+	struct {
+		arch_spinlock_t lock;
+		u32 value;
+	};
+	u64 lockval;
+};
+
+static union hpet_lock hpet __cacheline_aligned = {
+	{ .lock = __ARCH_SPIN_LOCK_UNLOCKED, },
+};
+
+static cycle_t read_hpet(struct clocksource *cs)
+{
+	unsigned long flags;
+	union hpet_lock old, new;
+
+	BUILD_BUG_ON(sizeof(union hpet_lock) != 8);
+
+	/*
+	 * Read HPET directly if in NMI.
+	 */
+	if (in_nmi())
+		return (cycle_t)hpet_readl(HPET_COUNTER);
+
+	/*
+	 * Read the current state of the lock and HPET value atomically.
+	 */
+	old.lockval = READ_ONCE(hpet.lockval);
+
+	if (arch_spin_is_locked(&old.lock))
+		goto contended;
+
+	local_irq_save(flags);
+	if (arch_spin_trylock(&hpet.lock)) {
+		new.value = hpet_readl(HPET_COUNTER);
+		/*
+		 * Use WRITE_ONCE() to prevent store tearing.
+		 */
+		WRITE_ONCE(hpet.value, new.value);
+		arch_spin_unlock(&hpet.lock);
+		local_irq_restore(flags);
+		return (cycle_t)new.value;
+	}
+	local_irq_restore(flags);
+
+contended:
+	/*
+	 * Contended case
+	 * --------------
+	 * Wait until the HPET value change or the lock is free to indicate
+	 * its value is up-to-date.
+	 *
+	 * It is possible that old.value has already contained the latest
+	 * HPET value while the lock holder was in the process of releasing
+	 * the lock. Checking for lock state change will enable us to return
+	 * the value immediately instead of waiting for the next HPET reader
+	 * to come along.
+	 */
+	do {
+		cpu_relax();
+		new.lockval = READ_ONCE(hpet.lockval);
+	} while ((new.value == old.value) && arch_spin_is_locked(&new.lock));
+
+	return (cycle_t)new.value;
+}
+#else
+/*
+ * For UP or 32-bit.
+ */
 static cycle_t read_hpet(struct clocksource *cs)
 {
 	return (cycle_t)hpet_readl(HPET_COUNTER);
 }
+#endif
 
 static struct clocksource clocksource_hpet = {
 	.name		= "hpet",
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 4a79037..9ebd0b0 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -40,8 +40,7 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 	if (user_mode(regs))
 		return;
 
-	if (regs->sp >= curbase + sizeof(struct thread_info) +
-				  sizeof(struct pt_regs) + STACK_TOP_MARGIN &&
+	if (regs->sp >= curbase + sizeof(struct pt_regs) + STACK_TOP_MARGIN &&
 	    regs->sp <= curbase + THREAD_SIZE)
 		return;
 
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index f2356bd..3407b14 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -99,14 +99,14 @@ static int setup_e820_entries(struct boot_params *params)
 {
 	unsigned int nr_e820_entries;
 
-	nr_e820_entries = e820_saved.nr_map;
+	nr_e820_entries = e820_saved->nr_map;
 
 	/* TODO: Pass entries more than E820MAX in bootparams setup data */
 	if (nr_e820_entries > E820MAX)
 		nr_e820_entries = E820MAX;
 
 	params->e820_entries = nr_e820_entries;
-	memcpy(&params->e820_map, &e820_saved.map,
+	memcpy(&params->e820_map, &e820_saved->map,
 	       nr_e820_entries * sizeof(struct e820entry));
 
 	return 0;
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 04cde52..8e36f24 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -50,6 +50,7 @@
 #include <asm/apicdef.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
+#include <asm/switch_to.h>
 
 struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
 {
@@ -166,21 +167,19 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[GDB_DX]	= 0;
 	gdb_regs[GDB_SI]	= 0;
 	gdb_regs[GDB_DI]	= 0;
-	gdb_regs[GDB_BP]	= *(unsigned long *)p->thread.sp;
+	gdb_regs[GDB_BP]	= ((struct inactive_task_frame *)p->thread.sp)->bp;
 #ifdef CONFIG_X86_32
 	gdb_regs[GDB_DS]	= __KERNEL_DS;
 	gdb_regs[GDB_ES]	= __KERNEL_DS;
 	gdb_regs[GDB_PS]	= 0;
 	gdb_regs[GDB_CS]	= __KERNEL_CS;
-	gdb_regs[GDB_PC]	= p->thread.ip;
 	gdb_regs[GDB_SS]	= __KERNEL_DS;
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
 #else
-	gdb_regs32[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
+	gdb_regs32[GDB_PS]	= 0;
 	gdb_regs32[GDB_CS]	= __KERNEL_CS;
 	gdb_regs32[GDB_SS]	= __KERNEL_DS;
-	gdb_regs[GDB_PC]	= 0;
 	gdb_regs[GDB_R8]	= 0;
 	gdb_regs[GDB_R9]	= 0;
 	gdb_regs[GDB_R10]	= 0;
@@ -190,6 +189,7 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[GDB_R14]	= 0;
 	gdb_regs[GDB_R15]	= 0;
 #endif
+	gdb_regs[GDB_PC]	= 0;
 	gdb_regs[GDB_SP]	= p->thread.sp;
 }
 
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 7847e5c..28cee01 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -45,7 +45,7 @@
 #include <linux/slab.h>
 #include <linux/hardirq.h>
 #include <linux/preempt.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/kdebug.h>
 #include <linux/kallsyms.h>
 #include <linux/ftrace.h>
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 4425f59..3bb4c5f 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -24,7 +24,7 @@
 #include <linux/slab.h>
 #include <linux/hardirq.h>
 #include <linux/preempt.h>
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <linux/kdebug.h>
 #include <linux/kallsyms.h>
 #include <linux/ftrace.h>
diff --git a/arch/x86/kernel/ksysfs.c b/arch/x86/kernel/ksysfs.c
index c2bedae..4afc67f 100644
--- a/arch/x86/kernel/ksysfs.c
+++ b/arch/x86/kernel/ksysfs.c
@@ -184,7 +184,7 @@ out:
 
 static struct kobj_attribute type_attr = __ATTR_RO(type);
 
-static struct bin_attribute data_attr = {
+static struct bin_attribute data_attr __ro_after_init = {
 	.attr = {
 		.name = "data",
 		.mode = S_IRUGO,
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 1726c4c..edbbfc8 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -423,12 +423,7 @@ static void __init kvm_smp_prepare_boot_cpu(void)
 	kvm_spinlock_init();
 }
 
-static void kvm_guest_cpu_online(void *dummy)
-{
-	kvm_guest_cpu_init();
-}
-
-static void kvm_guest_cpu_offline(void *dummy)
+static void kvm_guest_cpu_offline(void)
 {
 	kvm_disable_steal_time();
 	if (kvm_para_has_feature(KVM_FEATURE_PV_EOI))
@@ -437,29 +432,21 @@ static void kvm_guest_cpu_offline(void *dummy)
 	apf_task_wake_all();
 }
 
-static int kvm_cpu_notify(struct notifier_block *self, unsigned long action,
-			  void *hcpu)
+static int kvm_cpu_online(unsigned int cpu)
 {
-	int cpu = (unsigned long)hcpu;
-	switch (action) {
-	case CPU_ONLINE:
-	case CPU_DOWN_FAILED:
-	case CPU_ONLINE_FROZEN:
-		smp_call_function_single(cpu, kvm_guest_cpu_online, NULL, 0);
-		break;
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-		smp_call_function_single(cpu, kvm_guest_cpu_offline, NULL, 1);
-		break;
-	default:
-		break;
-	}
-	return NOTIFY_OK;
+	local_irq_disable();
+	kvm_guest_cpu_init();
+	local_irq_enable();
+	return 0;
 }
 
-static struct notifier_block kvm_cpu_notifier = {
-        .notifier_call  = kvm_cpu_notify,
-};
+static int kvm_cpu_down_prepare(unsigned int cpu)
+{
+	local_irq_disable();
+	kvm_guest_cpu_offline();
+	local_irq_enable();
+	return 0;
+}
 #endif
 
 static void __init kvm_apf_trap_init(void)
@@ -494,7 +481,9 @@ void __init kvm_guest_init(void)
 
 #ifdef CONFIG_SMP
 	smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
-	register_cpu_notifier(&kvm_cpu_notifier);
+	if (cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/kvm:online",
+				      kvm_cpu_online, kvm_cpu_down_prepare) < 0)
+		pr_err("kvm_guest: Failed to install cpu hotplug callbacks\n");
 #else
 	kvm_guest_cpu_init();
 #endif
@@ -575,9 +564,6 @@ static void kvm_kick_cpu(int cpu)
 	kvm_hypercall2(KVM_HC_KICK_CPU, flags, apicid);
 }
 
-
-#ifdef CONFIG_QUEUED_SPINLOCKS
-
 #include <asm/qspinlock.h>
 
 static void kvm_wait(u8 *ptr, u8 val)
@@ -606,243 +592,6 @@ out:
 	local_irq_restore(flags);
 }
 
-#else /* !CONFIG_QUEUED_SPINLOCKS */
-
-enum kvm_contention_stat {
-	TAKEN_SLOW,
-	TAKEN_SLOW_PICKUP,
-	RELEASED_SLOW,
-	RELEASED_SLOW_KICKED,
-	NR_CONTENTION_STATS
-};
-
-#ifdef CONFIG_KVM_DEBUG_FS
-#define HISTO_BUCKETS	30
-
-static struct kvm_spinlock_stats
-{
-	u32 contention_stats[NR_CONTENTION_STATS];
-	u32 histo_spin_blocked[HISTO_BUCKETS+1];
-	u64 time_blocked;
-} spinlock_stats;
-
-static u8 zero_stats;
-
-static inline void check_zero(void)
-{
-	u8 ret;
-	u8 old;
-
-	old = READ_ONCE(zero_stats);
-	if (unlikely(old)) {
-		ret = cmpxchg(&zero_stats, old, 0);
-		/* This ensures only one fellow resets the stat */
-		if (ret == old)
-			memset(&spinlock_stats, 0, sizeof(spinlock_stats));
-	}
-}
-
-static inline void add_stats(enum kvm_contention_stat var, u32 val)
-{
-	check_zero();
-	spinlock_stats.contention_stats[var] += val;
-}
-
-
-static inline u64 spin_time_start(void)
-{
-	return sched_clock();
-}
-
-static void __spin_time_accum(u64 delta, u32 *array)
-{
-	unsigned index;
-
-	index = ilog2(delta);
-	check_zero();
-
-	if (index < HISTO_BUCKETS)
-		array[index]++;
-	else
-		array[HISTO_BUCKETS]++;
-}
-
-static inline void spin_time_accum_blocked(u64 start)
-{
-	u32 delta;
-
-	delta = sched_clock() - start;
-	__spin_time_accum(delta, spinlock_stats.histo_spin_blocked);
-	spinlock_stats.time_blocked += delta;
-}
-
-static struct dentry *d_spin_debug;
-static struct dentry *d_kvm_debug;
-
-static struct dentry *kvm_init_debugfs(void)
-{
-	d_kvm_debug = debugfs_create_dir("kvm-guest", NULL);
-	if (!d_kvm_debug)
-		printk(KERN_WARNING "Could not create 'kvm' debugfs directory\n");
-
-	return d_kvm_debug;
-}
-
-static int __init kvm_spinlock_debugfs(void)
-{
-	struct dentry *d_kvm;
-
-	d_kvm = kvm_init_debugfs();
-	if (d_kvm == NULL)
-		return -ENOMEM;
-
-	d_spin_debug = debugfs_create_dir("spinlocks", d_kvm);
-
-	debugfs_create_u8("zero_stats", 0644, d_spin_debug, &zero_stats);
-
-	debugfs_create_u32("taken_slow", 0444, d_spin_debug,
-		   &spinlock_stats.contention_stats[TAKEN_SLOW]);
-	debugfs_create_u32("taken_slow_pickup", 0444, d_spin_debug,
-		   &spinlock_stats.contention_stats[TAKEN_SLOW_PICKUP]);
-
-	debugfs_create_u32("released_slow", 0444, d_spin_debug,
-		   &spinlock_stats.contention_stats[RELEASED_SLOW]);
-	debugfs_create_u32("released_slow_kicked", 0444, d_spin_debug,
-		   &spinlock_stats.contention_stats[RELEASED_SLOW_KICKED]);
-
-	debugfs_create_u64("time_blocked", 0444, d_spin_debug,
-			   &spinlock_stats.time_blocked);
-
-	debugfs_create_u32_array("histo_blocked", 0444, d_spin_debug,
-		     spinlock_stats.histo_spin_blocked, HISTO_BUCKETS + 1);
-
-	return 0;
-}
-fs_initcall(kvm_spinlock_debugfs);
-#else  /* !CONFIG_KVM_DEBUG_FS */
-static inline void add_stats(enum kvm_contention_stat var, u32 val)
-{
-}
-
-static inline u64 spin_time_start(void)
-{
-	return 0;
-}
-
-static inline void spin_time_accum_blocked(u64 start)
-{
-}
-#endif  /* CONFIG_KVM_DEBUG_FS */
-
-struct kvm_lock_waiting {
-	struct arch_spinlock *lock;
-	__ticket_t want;
-};
-
-/* cpus 'waiting' on a spinlock to become available */
-static cpumask_t waiting_cpus;
-
-/* Track spinlock on which a cpu is waiting */
-static DEFINE_PER_CPU(struct kvm_lock_waiting, klock_waiting);
-
-__visible void kvm_lock_spinning(struct arch_spinlock *lock, __ticket_t want)
-{
-	struct kvm_lock_waiting *w;
-	int cpu;
-	u64 start;
-	unsigned long flags;
-	__ticket_t head;
-
-	if (in_nmi())
-		return;
-
-	w = this_cpu_ptr(&klock_waiting);
-	cpu = smp_processor_id();
-	start = spin_time_start();
-
-	/*
-	 * Make sure an interrupt handler can't upset things in a
-	 * partially setup state.
-	 */
-	local_irq_save(flags);
-
-	/*
-	 * The ordering protocol on this is that the "lock" pointer
-	 * may only be set non-NULL if the "want" ticket is correct.
-	 * If we're updating "want", we must first clear "lock".
-	 */
-	w->lock = NULL;
-	smp_wmb();
-	w->want = want;
-	smp_wmb();
-	w->lock = lock;
-
-	add_stats(TAKEN_SLOW, 1);
-
-	/*
-	 * This uses set_bit, which is atomic but we should not rely on its
-	 * reordering gurantees. So barrier is needed after this call.
-	 */
-	cpumask_set_cpu(cpu, &waiting_cpus);
-
-	barrier();
-
-	/*
-	 * Mark entry to slowpath before doing the pickup test to make
-	 * sure we don't deadlock with an unlocker.
-	 */
-	__ticket_enter_slowpath(lock);
-
-	/* make sure enter_slowpath, which is atomic does not cross the read */
-	smp_mb__after_atomic();
-
-	/*
-	 * check again make sure it didn't become free while
-	 * we weren't looking.
-	 */
-	head = READ_ONCE(lock->tickets.head);
-	if (__tickets_equal(head, want)) {
-		add_stats(TAKEN_SLOW_PICKUP, 1);
-		goto out;
-	}
-
-	/*
-	 * halt until it's our turn and kicked. Note that we do safe halt
-	 * for irq enabled case to avoid hang when lock info is overwritten
-	 * in irq spinlock slowpath and no spurious interrupt occur to save us.
-	 */
-	if (arch_irqs_disabled_flags(flags))
-		halt();
-	else
-		safe_halt();
-
-out:
-	cpumask_clear_cpu(cpu, &waiting_cpus);
-	w->lock = NULL;
-	local_irq_restore(flags);
-	spin_time_accum_blocked(start);
-}
-PV_CALLEE_SAVE_REGS_THUNK(kvm_lock_spinning);
-
-/* Kick vcpu waiting on @lock->head to reach value @ticket */
-static void kvm_unlock_kick(struct arch_spinlock *lock, __ticket_t ticket)
-{
-	int cpu;
-
-	add_stats(RELEASED_SLOW, 1);
-	for_each_cpu(cpu, &waiting_cpus) {
-		const struct kvm_lock_waiting *w = &per_cpu(klock_waiting, cpu);
-		if (READ_ONCE(w->lock) == lock &&
-		    READ_ONCE(w->want) == ticket) {
-			add_stats(RELEASED_SLOW_KICKED, 1);
-			kvm_kick_cpu(cpu);
-			break;
-		}
-	}
-}
-
-#endif /* !CONFIG_QUEUED_SPINLOCKS */
-
 /*
  * Setup pv_lock_ops to exploit KVM_FEATURE_PV_UNHALT if present.
  */
@@ -854,16 +603,11 @@ void __init kvm_spinlock_init(void)
 	if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT))
 		return;
 
-#ifdef CONFIG_QUEUED_SPINLOCKS
 	__pv_init_lock_hash();
 	pv_lock_ops.queued_spin_lock_slowpath = __pv_queued_spin_lock_slowpath;
 	pv_lock_ops.queued_spin_unlock = PV_CALLEE_SAVE(__pv_queued_spin_unlock);
 	pv_lock_ops.wait = kvm_wait;
 	pv_lock_ops.kick = kvm_kick_cpu;
-#else /* !CONFIG_QUEUED_SPINLOCKS */
-	pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(kvm_lock_spinning);
-	pv_lock_ops.unlock_kick = kvm_unlock_kick;
-#endif
 }
 
 static __init int kvm_spinlock_init_jump(void)
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 1d39bfb..60b9949 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -29,7 +29,7 @@
 #include <asm/x86_init.h>
 #include <asm/reboot.h>
 
-static int kvmclock = 1;
+static int kvmclock __ro_after_init = 1;
 static int msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
 static int msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
 static cycle_t kvm_sched_clock_offset;
@@ -289,6 +289,7 @@ void __init kvmclock_init(void)
 	put_cpu();
 
 	x86_platform.calibrate_tsc = kvm_get_tsc_khz;
+	x86_platform.calibrate_cpu = kvm_get_tsc_khz;
 	x86_platform.get_wallclock = kvm_get_wallclock;
 	x86_platform.set_wallclock = kvm_set_wallclock;
 #ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/x86/kernel/livepatch.c b/arch/x86/kernel/livepatch.c
new file mode 100644
index 0000000..e9d252d
--- /dev/null
+++ b/arch/x86/kernel/livepatch.c
@@ -0,0 +1,65 @@
+/*
+ * livepatch.c - x86-specific Kernel Live Patching Core
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/livepatch.h>
+#include <asm/text-patching.h>
+
+/* Apply per-object alternatives. Based on x86 module_finalize() */
+void arch_klp_init_object_loaded(struct klp_patch *patch,
+				 struct klp_object *obj)
+{
+	int cnt;
+	struct klp_modinfo *info;
+	Elf_Shdr *s, *alt = NULL, *para = NULL;
+	void *aseg, *pseg;
+	const char *objname;
+	char sec_objname[MODULE_NAME_LEN];
+	char secname[KSYM_NAME_LEN];
+
+	info = patch->mod->klp_info;
+	objname = obj->name ? obj->name : "vmlinux";
+
+	/* See livepatch core code for BUILD_BUG_ON() explanation */
+	BUILD_BUG_ON(MODULE_NAME_LEN < 56 || KSYM_NAME_LEN != 128);
+
+	for (s = info->sechdrs; s < info->sechdrs + info->hdr.e_shnum; s++) {
+		/* Apply per-object .klp.arch sections */
+		cnt = sscanf(info->secstrings + s->sh_name,
+			     ".klp.arch.%55[^.].%127s",
+			     sec_objname, secname);
+		if (cnt != 2)
+			continue;
+		if (strcmp(sec_objname, objname))
+			continue;
+		if (!strcmp(".altinstructions", secname))
+			alt = s;
+		if (!strcmp(".parainstructions", secname))
+			para = s;
+	}
+
+	if (alt) {
+		aseg = (void *) alt->sh_addr;
+		apply_alternatives(aseg, aseg + alt->sh_size);
+	}
+
+	if (para) {
+		pseg = (void *) para->sh_addr;
+		apply_paravirt(pseg, pseg + para->sh_size);
+	}
+}
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 5a294e4..8c1f218 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -337,6 +337,9 @@ void arch_crash_save_vmcoreinfo(void)
 #endif
 	vmcoreinfo_append_str("KERNELOFFSET=%lx\n",
 			      kaslr_offset());
+	VMCOREINFO_PAGE_OFFSET(PAGE_OFFSET);
+	VMCOREINFO_VMALLOC_START(VMALLOC_START);
+	VMCOREINFO_VMEMMAP_START(VMEMMAP_START);
 }
 
 /* arch-dependent functionality related to kexec file-based syscall */
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 068c4a9..0f8d204 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -499,6 +499,9 @@ void __init default_get_smp_config(unsigned int early)
 {
 	struct mpf_intel *mpf = mpf_found;
 
+	if (!smp_found_config)
+		return;
+
 	if (!mpf)
 		return;
 
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
index 1939a02..2c55a00 100644
--- a/arch/x86/kernel/paravirt-spinlocks.c
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -8,7 +8,6 @@
 
 #include <asm/paravirt.h>
 
-#ifdef CONFIG_QUEUED_SPINLOCKS
 __visible void __native_queued_spin_unlock(struct qspinlock *lock)
 {
 	native_queued_spin_unlock(lock);
@@ -21,19 +20,13 @@ bool pv_is_native_spin_unlock(void)
 	return pv_lock_ops.queued_spin_unlock.func ==
 		__raw_callee_save___native_queued_spin_unlock;
 }
-#endif
 
 struct pv_lock_ops pv_lock_ops = {
 #ifdef CONFIG_SMP
-#ifdef CONFIG_QUEUED_SPINLOCKS
 	.queued_spin_lock_slowpath = native_queued_spin_lock_slowpath,
 	.queued_spin_unlock = PV_CALLEE_SAVE(__native_queued_spin_unlock),
 	.wait = paravirt_nop,
 	.kick = paravirt_nop,
-#else /* !CONFIG_QUEUED_SPINLOCKS */
-	.lock_spinning = __PV_IS_CALLEE_SAVE(paravirt_nop),
-	.unlock_kick = paravirt_nop,
-#endif /* !CONFIG_QUEUED_SPINLOCKS */
 #endif /* SMP */
 };
 EXPORT_SYMBOL(pv_lock_ops);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 1acfd76..bbf3d59 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -332,7 +332,6 @@ __visible struct pv_cpu_ops pv_cpu_ops = {
 	.read_cr0 = native_read_cr0,
 	.write_cr0 = native_write_cr0,
 	.read_cr4 = native_read_cr4,
-	.read_cr4_safe = native_read_cr4_safe,
 	.write_cr4 = native_write_cr4,
 #ifdef CONFIG_X86_64
 	.read_cr8 = native_read_cr8,
@@ -389,7 +388,7 @@ NOKPROBE_SYMBOL(native_load_idt);
 #define PTE_IDENT	__PV_IS_CALLEE_SAVE(_paravirt_ident_64)
 #endif
 
-struct pv_mmu_ops pv_mmu_ops = {
+struct pv_mmu_ops pv_mmu_ops __ro_after_init = {
 
 	.read_cr2 = native_read_cr2,
 	.write_cr2 = native_write_cr2,
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index 158dc06..920c6ae 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -10,7 +10,7 @@ DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
 DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
 DEF_NATIVE(pv_cpu_ops, clts, "clts");
 
-#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS)
+#if defined(CONFIG_PARAVIRT_SPINLOCKS)
 DEF_NATIVE(pv_lock_ops, queued_spin_unlock, "movb $0, (%eax)");
 #endif
 
@@ -49,7 +49,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_mmu_ops, read_cr3);
 		PATCH_SITE(pv_mmu_ops, write_cr3);
 		PATCH_SITE(pv_cpu_ops, clts);
-#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS)
+#if defined(CONFIG_PARAVIRT_SPINLOCKS)
 		case PARAVIRT_PATCH(pv_lock_ops.queued_spin_unlock):
 			if (pv_is_native_spin_unlock()) {
 				start = start_pv_lock_ops_queued_spin_unlock;
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index e70087a..bb3840c 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -19,7 +19,7 @@ DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
 DEF_NATIVE(, mov32, "mov %edi, %eax");
 DEF_NATIVE(, mov64, "mov %rdi, %rax");
 
-#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS)
+#if defined(CONFIG_PARAVIRT_SPINLOCKS)
 DEF_NATIVE(pv_lock_ops, queued_spin_unlock, "movb $0, (%rdi)");
 #endif
 
@@ -61,7 +61,7 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_cpu_ops, clts);
 		PATCH_SITE(pv_mmu_ops, flush_tlb_single);
 		PATCH_SITE(pv_cpu_ops, wbinvd);
-#if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS)
+#if defined(CONFIG_PARAVIRT_SPINLOCKS)
 		case PARAVIRT_PATCH(pv_lock_ops.queued_spin_unlock):
 			if (pv_is_native_spin_unlock()) {
 				start = start_pv_lock_ops_queued_spin_unlock;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 62c0b0e..0888a87 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -32,6 +32,7 @@
 #include <asm/tlbflush.h>
 #include <asm/mce.h>
 #include <asm/vm86.h>
+#include <asm/switch_to.h>
 
 /*
  * per-CPU TSS segments. Threads are completely 'soft' on Linux,
@@ -301,7 +302,7 @@ void arch_cpu_idle(void)
 /*
  * We use this if we don't have any better idle routine..
  */
-void default_idle(void)
+void __cpuidle default_idle(void)
 {
 	trace_cpu_idle_rcuidle(1, smp_processor_id());
 	safe_halt();
@@ -416,7 +417,7 @@ static int prefer_mwait_c1_over_halt(const struct cpuinfo_x86 *c)
  * with interrupts enabled and no flags, which is backwards compatible with the
  * original MWAIT implementation.
  */
-static void mwait_idle(void)
+static __cpuidle void mwait_idle(void)
 {
 	if (!current_set_polling_and_test()) {
 		trace_cpu_idle_rcuidle(1, smp_processor_id());
@@ -508,8 +509,18 @@ unsigned long arch_align_stack(unsigned long sp)
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long range_end = mm->brk + 0x02000000;
-	return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+	return randomize_page(mm->brk, 0x02000000);
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * What is this good for? it will be always the scheduler or ret_from_fork.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+	struct inactive_task_frame *frame =
+		(struct inactive_task_frame *) READ_ONCE(tsk->thread.sp);
+	return READ_ONCE_NOCHECK(frame->ret_addr);
 }
 
 /*
@@ -520,15 +531,18 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
  */
 unsigned long get_wchan(struct task_struct *p)
 {
-	unsigned long start, bottom, top, sp, fp, ip;
+	unsigned long start, bottom, top, sp, fp, ip, ret = 0;
 	int count = 0;
 
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
+	if (!try_get_task_stack(p))
+		return 0;
+
 	start = (unsigned long)task_stack_page(p);
 	if (!start)
-		return 0;
+		goto out;
 
 	/*
 	 * Layout of the stack page:
@@ -537,9 +551,7 @@ unsigned long get_wchan(struct task_struct *p)
 	 * PADDING
 	 * ----------- top = topmax - TOP_OF_KERNEL_STACK_PADDING
 	 * stack
-	 * ----------- bottom = start + sizeof(thread_info)
-	 * thread_info
-	 * ----------- start
+	 * ----------- bottom = start
 	 *
 	 * The tasks stack pointer points at the location where the
 	 * framepointer is stored. The data on the stack is:
@@ -550,20 +562,25 @@ unsigned long get_wchan(struct task_struct *p)
 	 */
 	top = start + THREAD_SIZE - TOP_OF_KERNEL_STACK_PADDING;
 	top -= 2 * sizeof(unsigned long);
-	bottom = start + sizeof(struct thread_info);
+	bottom = start;
 
 	sp = READ_ONCE(p->thread.sp);
 	if (sp < bottom || sp > top)
-		return 0;
+		goto out;
 
-	fp = READ_ONCE_NOCHECK(*(unsigned long *)sp);
+	fp = READ_ONCE_NOCHECK(((struct inactive_task_frame *)sp)->bp);
 	do {
 		if (fp < bottom || fp > top)
-			return 0;
+			goto out;
 		ip = READ_ONCE_NOCHECK(*(unsigned long *)(fp + sizeof(unsigned long)));
-		if (!in_sched_functions(ip))
-			return ip;
+		if (!in_sched_functions(ip)) {
+			ret = ip;
+			goto out;
+		}
 		fp = READ_ONCE_NOCHECK(*(unsigned long *)fp);
 	} while (count++ < 16 && p->state != TASK_RUNNING);
-	return 0;
+
+out:
+	put_task_stack(p);
+	return ret;
 }
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index d86be29..bd7be8e 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -55,17 +55,6 @@
 #include <asm/switch_to.h>
 #include <asm/vm86.h>
 
-asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
-
-/*
- * Return saved PC of a blocked thread.
- */
-unsigned long thread_saved_pc(struct task_struct *tsk)
-{
-	return ((unsigned long *)tsk->thread.sp)[3];
-}
-
 void __show_regs(struct pt_regs *regs, int all)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
@@ -101,7 +90,7 @@ void __show_regs(struct pt_regs *regs, int all)
 	cr0 = read_cr0();
 	cr2 = read_cr2();
 	cr3 = read_cr3();
-	cr4 = __read_cr4_safe();
+	cr4 = __read_cr4();
 	printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
 			cr0, cr2, cr3, cr4);
 
@@ -133,35 +122,31 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
 	unsigned long arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
+	struct fork_frame *fork_frame = container_of(childregs, struct fork_frame, regs);
+	struct inactive_task_frame *frame = &fork_frame->frame;
 	struct task_struct *tsk;
 	int err;
 
-	p->thread.sp = (unsigned long) childregs;
+	frame->bp = 0;
+	frame->ret_addr = (unsigned long) ret_from_fork;
+	p->thread.sp = (unsigned long) fork_frame;
 	p->thread.sp0 = (unsigned long) (childregs+1);
 	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
 
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		/* kernel thread */
 		memset(childregs, 0, sizeof(struct pt_regs));
-		p->thread.ip = (unsigned long) ret_from_kernel_thread;
-		task_user_gs(p) = __KERNEL_STACK_CANARY;
-		childregs->ds = __USER_DS;
-		childregs->es = __USER_DS;
-		childregs->fs = __KERNEL_PERCPU;
-		childregs->bx = sp;	/* function */
-		childregs->bp = arg;
-		childregs->orig_ax = -1;
-		childregs->cs = __KERNEL_CS | get_kernel_rpl();
-		childregs->flags = X86_EFLAGS_IF | X86_EFLAGS_FIXED;
+		frame->bx = sp;		/* function */
+		frame->di = arg;
 		p->thread.io_bitmap_ptr = NULL;
 		return 0;
 	}
+	frame->bx = 0;
 	*childregs = *current_pt_regs();
 	childregs->ax = 0;
 	if (sp)
 		childregs->sp = sp;
 
-	p->thread.ip = (unsigned long) ret_from_fork;
 	task_user_gs(p) = get_user_gs(current_pt_regs());
 
 	p->thread.io_bitmap_ptr = NULL;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 63236d8..b3760b3 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -49,8 +49,7 @@
 #include <asm/debugreg.h>
 #include <asm/switch_to.h>
 #include <asm/xen/hypervisor.h>
-
-asmlinkage extern void ret_from_fork(void);
+#include <asm/vdso.h>
 
 __visible DEFINE_PER_CPU(unsigned long, rsp_scratch);
 
@@ -110,12 +109,13 @@ void __show_regs(struct pt_regs *regs, int all)
 	get_debugreg(d7, 7);
 
 	/* Only print out debug registers if they are in their non-default state. */
-	if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
-	    (d6 == DR6_RESERVED) && (d7 == 0x400))
-		return;
-
-	printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
-	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
+	if (!((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
+	    (d6 == DR6_RESERVED) && (d7 == 0x400))) {
+		printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n",
+		       d0, d1, d2);
+		printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n",
+		       d3, d6, d7);
+	}
 
 	if (boot_cpu_has(X86_FEATURE_OSPKE))
 		printk(KERN_DEFAULT "PKRU: %08x\n", read_pkru());
@@ -141,12 +141,17 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
 {
 	int err;
 	struct pt_regs *childregs;
+	struct fork_frame *fork_frame;
+	struct inactive_task_frame *frame;
 	struct task_struct *me = current;
 
 	p->thread.sp0 = (unsigned long)task_stack_page(p) + THREAD_SIZE;
 	childregs = task_pt_regs(p);
-	p->thread.sp = (unsigned long) childregs;
-	set_tsk_thread_flag(p, TIF_FORK);
+	fork_frame = container_of(childregs, struct fork_frame, regs);
+	frame = &fork_frame->frame;
+	frame->bp = 0;
+	frame->ret_addr = (unsigned long) ret_from_fork;
+	p->thread.sp = (unsigned long) fork_frame;
 	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
@@ -160,15 +165,11 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		/* kernel thread */
 		memset(childregs, 0, sizeof(struct pt_regs));
-		childregs->sp = (unsigned long)childregs;
-		childregs->ss = __KERNEL_DS;
-		childregs->bx = sp; /* function */
-		childregs->bp = arg;
-		childregs->orig_ax = -1;
-		childregs->cs = __KERNEL_CS | get_kernel_rpl();
-		childregs->flags = X86_EFLAGS_IF | X86_EFLAGS_FIXED;
+		frame->bx = sp;		/* function */
+		frame->r12 = arg;
 		return 0;
 	}
+	frame->bx = 0;
 	*childregs = *current_pt_regs();
 
 	childregs->ax = 0;
@@ -511,7 +512,7 @@ void set_personality_ia32(bool x32)
 		current->personality &= ~READ_IMPLIES_EXEC;
 		/* in_compat_syscall() uses the presence of the x32
 		   syscall bit flag to determine compat status */
-		current_thread_info()->status &= ~TS_COMPAT;
+		current->thread.status &= ~TS_COMPAT;
 	} else {
 		set_thread_flag(TIF_IA32);
 		clear_thread_flag(TIF_X32);
@@ -519,11 +520,24 @@ void set_personality_ia32(bool x32)
 			current->mm->context.ia32_compat = TIF_IA32;
 		current->personality |= force_personality32;
 		/* Prepare the first "return" to user space */
-		current_thread_info()->status |= TS_COMPAT;
+		current->thread.status |= TS_COMPAT;
 	}
 }
 EXPORT_SYMBOL_GPL(set_personality_ia32);
 
+#ifdef CONFIG_CHECKPOINT_RESTORE
+static long prctl_map_vdso(const struct vdso_image *image, unsigned long addr)
+{
+	int ret;
+
+	ret = map_vdso_once(image, addr);
+	if (ret)
+		return ret;
+
+	return (long)image->size;
+}
+#endif
+
 long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 {
 	int ret = 0;
@@ -577,6 +591,19 @@ long do_arch_prctl(struct task_struct *task, int code, unsigned long addr)
 		break;
 	}
 
+#ifdef CONFIG_CHECKPOINT_RESTORE
+# ifdef CONFIG_X86_X32_ABI
+	case ARCH_MAP_VDSO_X32:
+		return prctl_map_vdso(&vdso_image_x32, addr);
+# endif
+# if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
+	case ARCH_MAP_VDSO_32:
+		return prctl_map_vdso(&vdso_image_32, addr);
+# endif
+	case ARCH_MAP_VDSO_64:
+		return prctl_map_vdso(&vdso_image_64, addr);
+#endif
+
 	default:
 		ret = -EINVAL;
 		break;
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index f79576a..0e63c02 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -173,8 +173,8 @@ unsigned long kernel_stack_pointer(struct pt_regs *regs)
 		return sp;
 
 	prev_esp = (u32 *)(context);
-	if (prev_esp)
-		return (unsigned long)prev_esp;
+	if (*prev_esp)
+		return (unsigned long)*prev_esp;
 
 	return (unsigned long)regs;
 }
@@ -934,7 +934,7 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 value)
 		 */
 		regs->orig_ax = value;
 		if (syscall_get_nr(child, regs) >= 0)
-			task_thread_info(child)->status |= TS_I386_REGS_POKED;
+			child->thread.status |= TS_I386_REGS_POKED;
 		break;
 
 	case offsetof(struct user32, regs.eflags):
@@ -1250,7 +1250,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 #ifdef CONFIG_X86_64
 
-static struct user_regset x86_64_regsets[] __read_mostly = {
+static struct user_regset x86_64_regsets[] __ro_after_init = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
 		.n = sizeof(struct user_regs_struct) / sizeof(long),
@@ -1291,7 +1291,7 @@ static const struct user_regset_view user_x86_64_view = {
 #endif	/* CONFIG_X86_64 */
 
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
-static struct user_regset x86_32_regsets[] __read_mostly = {
+static struct user_regset x86_32_regsets[] __ro_after_init = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
 		.n = sizeof(struct user_regs_struct32) / sizeof(u32),
@@ -1344,7 +1344,7 @@ static const struct user_regset_view user_x86_32_view = {
  */
 u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 
-void update_regset_xstate_info(unsigned int size, u64 xstate_mask)
+void __init update_regset_xstate_info(unsigned int size, u64 xstate_mask)
 {
 #ifdef CONFIG_X86_64
 	x86_64_regsets[REGSET_XSTATE].n = size / sizeof(u64);
@@ -1358,7 +1358,7 @@ void update_regset_xstate_info(unsigned int size, u64 xstate_mask)
 const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 {
 #ifdef CONFIG_IA32_EMULATION
-	if (test_tsk_thread_flag(task, TIF_IA32))
+	if (!user_64bit_mode(task_pt_regs(task)))
 #endif
 #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
 		return &user_x86_32_view;
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 3599404..5b2cc88 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -80,7 +80,7 @@ cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 
 	do {
 		version = pvclock_read_begin(src);
-		ret = __pvclock_read_cycles(src);
+		ret = __pvclock_read_cycles(src, rdtsc_ordered());
 		flags = src->flags;
 	} while (pvclock_read_retry(src, version));
 
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index cc457ff..51402a7 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -626,3 +626,34 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
 			amd_disable_seq_and_redirect_scrub);
 
 #endif
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+#include <linux/jump_label.h>
+#include <asm/string_64.h>
+
+/* Ivy Bridge, Haswell, Broadwell */
+static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev)
+{
+	u32 capid0;
+
+	pci_read_config_dword(pdev, 0x84, &capid0);
+
+	if (capid0 & 0x10)
+		static_branch_inc(&mcsafe_key);
+}
+
+/* Skylake */
+static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev)
+{
+	u32 capid0;
+
+	pci_read_config_dword(pdev, 0x84, &capid0);
+
+	if ((capid0 & 0xc0) == 0xc0)
+		static_branch_inc(&mcsafe_key);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, quirk_intel_brickland_xeon_ras_cap);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2083, quirk_intel_purley_xeon_ras_cap);
+#endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 63bf27d..e244c19 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -705,7 +705,7 @@ static void native_machine_power_off(void)
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
 
-struct machine_ops machine_ops = {
+struct machine_ops machine_ops __ro_after_init = {
 	.power_off = native_machine_power_off,
 	.shutdown = native_machine_shutdown,
 	.emergency_restart = native_machine_emergency_restart,
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
index 80eab01..2408c16 100644
--- a/arch/x86/kernel/resource.c
+++ b/arch/x86/kernel/resource.c
@@ -27,8 +27,8 @@ static void remove_e820_regions(struct resource *avail)
 	int i;
 	struct e820entry *entry;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		entry = &e820.map[i];
+	for (i = 0; i < e820->nr_map; i++) {
+		entry = &e820->map[i];
 
 		resource_clip(avail, entry->addr,
 			      entry->addr + entry->size - 1);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 0fa60f5..bbfbca5 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -210,9 +210,9 @@ EXPORT_SYMBOL(boot_cpu_data);
 
 
 #if !defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64)
-__visible unsigned long mmu_cr4_features;
+__visible unsigned long mmu_cr4_features __ro_after_init;
 #else
-__visible unsigned long mmu_cr4_features = X86_CR4_PAE;
+__visible unsigned long mmu_cr4_features __ro_after_init = X86_CR4_PAE;
 #endif
 
 /* Boot loader ID and version as integers, for the benefit of proc_dointvec */
@@ -458,8 +458,8 @@ static void __init e820_reserve_setup_data(void)
 		early_memunmap(data, sizeof(*data));
 	}
 
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
-	memcpy(&e820_saved, &e820, sizeof(struct e820map));
+	sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
+	memcpy(e820_saved, e820, sizeof(struct e820map));
 	printk(KERN_INFO "extended physical RAM map:\n");
 	e820_print_map("reserve setup_data");
 }
@@ -763,7 +763,7 @@ static void __init trim_bios_range(void)
 	 */
 	e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
 
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
 }
 
 /* called before trim_bios_range() to spare extra sanitize */
@@ -1032,7 +1032,7 @@ void __init setup_arch(char **cmdline_p)
 	if (ppro_with_ram_bug()) {
 		e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
 				  E820_RESERVED);
-		sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+		sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
 		printk(KERN_INFO "fixed physical RAM map:\n");
 		e820_print_map("bad_ppro");
 	}
@@ -1096,19 +1096,19 @@ void __init setup_arch(char **cmdline_p)
 	memblock_set_current_limit(ISA_END_ADDRESS);
 	memblock_x86_fill();
 
-	if (efi_enabled(EFI_BOOT)) {
+	reserve_bios_regions();
+
+	if (efi_enabled(EFI_MEMMAP)) {
 		efi_fake_memmap();
 		efi_find_mirror();
-	}
-
-	reserve_bios_regions();
+		efi_esrt_init();
 
-	/*
-	 * The EFI specification says that boot service code won't be called
-	 * after ExitBootServices(). This is, in fact, a lie.
-	 */
-	if (efi_enabled(EFI_MEMMAP))
+		/*
+		 * The EFI specification says that boot service code won't be
+		 * called after ExitBootServices(). This is, in fact, a lie.
+		 */
 		efi_reserve_boot_services();
+	}
 
 	/* preallocate 4k for mptable mpc */
 	early_reserve_e820_mpc_new();
@@ -1137,9 +1137,7 @@ void __init setup_arch(char **cmdline_p)
 	 * auditing all the early-boot CR4 manipulation would be needed to
 	 * rule it out.
 	 */
-	if (boot_cpu_data.cpuid_level >= 0)
-		/* A CPU has %cr4 if and only if it has CPUID. */
-		mmu_cr4_features = __read_cr4();
+	mmu_cr4_features = __read_cr4();
 
 	memblock_set_current_limit(get_max_mapped());
 
@@ -1221,8 +1219,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * get boot-time SMP configuration:
 	 */
-	if (smp_found_config)
-		get_smp_config();
+	get_smp_config();
 
 	prefill_possible_map();
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 7a40e06..2bbd27f 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -33,7 +33,7 @@ EXPORT_PER_CPU_SYMBOL(cpu_number);
 DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
 EXPORT_PER_CPU_SYMBOL(this_cpu_off);
 
-unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
+unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init = {
 	[0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
 };
 EXPORT_SYMBOL(__per_cpu_offset);
@@ -246,7 +246,7 @@ void __init setup_per_cpu_areas(void)
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
 			per_cpu(irq_stack_union.irq_stack, cpu) +
-			IRQ_STACK_SIZE - 64;
+			IRQ_STACK_SIZE;
 #endif
 #ifdef CONFIG_NUMA
 		per_cpu(x86_cpu_to_node_map, cpu) =
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 04cb321..763af1d 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -42,6 +42,7 @@
 #include <asm/syscalls.h>
 
 #include <asm/sigframe.h>
+#include <asm/signal.h>
 
 #define COPY(x)			do {			\
 	get_user_ex(regs->x, &sc->x);			\
@@ -547,7 +548,7 @@ static int x32_setup_rt_frame(struct ksignal *ksig,
 		return -EFAULT;
 
 	if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
-		if (copy_siginfo_to_user32(&frame->info, &ksig->info))
+		if (__copy_siginfo_to_user32(&frame->info, &ksig->info, true))
 			return -EFAULT;
 	}
 
@@ -660,20 +661,21 @@ badframe:
 	return 0;
 }
 
-static inline int is_ia32_compat_frame(void)
+static inline int is_ia32_compat_frame(struct ksignal *ksig)
 {
 	return IS_ENABLED(CONFIG_IA32_EMULATION) &&
-	       test_thread_flag(TIF_IA32);
+		ksig->ka.sa.sa_flags & SA_IA32_ABI;
 }
 
-static inline int is_ia32_frame(void)
+static inline int is_ia32_frame(struct ksignal *ksig)
 {
-	return IS_ENABLED(CONFIG_X86_32) || is_ia32_compat_frame();
+	return IS_ENABLED(CONFIG_X86_32) || is_ia32_compat_frame(ksig);
 }
 
-static inline int is_x32_frame(void)
+static inline int is_x32_frame(struct ksignal *ksig)
 {
-	return IS_ENABLED(CONFIG_X86_X32_ABI) && test_thread_flag(TIF_X32);
+	return IS_ENABLED(CONFIG_X86_X32_ABI) &&
+		ksig->ka.sa.sa_flags & SA_X32_ABI;
 }
 
 static int
@@ -684,12 +686,12 @@ setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
 	compat_sigset_t *cset = (compat_sigset_t *) set;
 
 	/* Set up the stack frame */
-	if (is_ia32_frame()) {
+	if (is_ia32_frame(ksig)) {
 		if (ksig->ka.sa.sa_flags & SA_SIGINFO)
 			return ia32_setup_rt_frame(usig, ksig, cset, regs);
 		else
 			return ia32_setup_frame(usig, ksig, cset, regs);
-	} else if (is_x32_frame()) {
+	} else if (is_x32_frame(ksig)) {
 		return x32_setup_rt_frame(ksig, cset, regs);
 	} else {
 		return __setup_rt_frame(ksig->sig, ksig, set, regs);
@@ -783,7 +785,7 @@ static inline unsigned long get_nr_restart_syscall(const struct pt_regs *regs)
 	 * than the tracee.
 	 */
 #ifdef CONFIG_IA32_EMULATION
-	if (current_thread_info()->status & (TS_COMPAT|TS_I386_REGS_POKED))
+	if (current->thread.status & (TS_COMPAT|TS_I386_REGS_POKED))
 		return __NR_ia32_restart_syscall;
 #endif
 #ifdef CONFIG_X86_X32_ABI
diff --git a/arch/x86/kernel/signal_compat.c b/arch/x86/kernel/signal_compat.c
index b44564b..40df337 100644
--- a/arch/x86/kernel/signal_compat.c
+++ b/arch/x86/kernel/signal_compat.c
@@ -1,5 +1,6 @@
 #include <linux/compat.h>
 #include <linux/uaccess.h>
+#include <linux/ptrace.h>
 
 /*
  * The compat_siginfo_t structure and handing code is very easy
@@ -92,10 +93,31 @@ static inline void signal_compat_build_tests(void)
 	/* any new si_fields should be added here */
 }
 
-int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
+void sigaction_compat_abi(struct k_sigaction *act, struct k_sigaction *oact)
+{
+	/* Don't leak in-kernel non-uapi flags to user-space */
+	if (oact)
+		oact->sa.sa_flags &= ~(SA_IA32_ABI | SA_X32_ABI);
+
+	if (!act)
+		return;
+
+	/* Don't let flags to be set from userspace */
+	act->sa.sa_flags &= ~(SA_IA32_ABI | SA_X32_ABI);
+
+	if (user_64bit_mode(current_pt_regs()))
+		return;
+
+	if (in_ia32_syscall())
+		act->sa.sa_flags |= SA_IA32_ABI;
+	if (in_x32_syscall())
+		act->sa.sa_flags |= SA_X32_ABI;
+}
+
+int __copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from,
+		bool x32_ABI)
 {
 	int err = 0;
-	bool ia32 = test_thread_flag(TIF_IA32);
 
 	signal_compat_build_tests();
 
@@ -146,7 +168,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
 				put_user_ex(from->si_arch, &to->si_arch);
 				break;
 			case __SI_CHLD >> 16:
-				if (ia32) {
+				if (!x32_ABI) {
 					put_user_ex(from->si_utime, &to->si_utime);
 					put_user_ex(from->si_stime, &to->si_stime);
 				} else {
@@ -180,6 +202,12 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
 	return err;
 }
 
+/* from syscall's path, where we know the ABI */
+int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
+{
+	return __copy_siginfo_to_user32(to, from, in_x32_syscall());
+}
+
 int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 {
 	int err = 0;
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 658777c..68f8cc2 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -32,6 +32,8 @@
 #include <asm/nmi.h>
 #include <asm/mce.h>
 #include <asm/trace/irq_vectors.h>
+#include <asm/kexec.h>
+
 /*
  *	Some notes on x86 processor bugs affecting SMP operation:
  *
@@ -342,6 +344,9 @@ struct smp_ops smp_ops = {
 	.smp_cpus_done		= native_smp_cpus_done,
 
 	.stop_other_cpus	= native_stop_other_cpus,
+#if defined(CONFIG_KEXEC_CORE)
+	.crash_stop_other_cpus	= kdump_nmi_shootdown_cpus,
+#endif
 	.smp_send_reschedule	= native_smp_send_reschedule,
 
 	.cpu_up			= native_cpu_up,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 4296beb..951f093 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -471,7 +471,7 @@ static bool match_die(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 	return false;
 }
 
-static struct sched_domain_topology_level numa_inside_package_topology[] = {
+static struct sched_domain_topology_level x86_numa_in_package_topology[] = {
 #ifdef CONFIG_SCHED_SMT
 	{ cpu_smt_mask, cpu_smt_flags, SD_INIT_NAME(SMT) },
 #endif
@@ -480,22 +480,23 @@ static struct sched_domain_topology_level numa_inside_package_topology[] = {
 #endif
 	{ NULL, },
 };
+
+static struct sched_domain_topology_level x86_topology[] = {
+#ifdef CONFIG_SCHED_SMT
+	{ cpu_smt_mask, cpu_smt_flags, SD_INIT_NAME(SMT) },
+#endif
+#ifdef CONFIG_SCHED_MC
+	{ cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) },
+#endif
+	{ cpu_cpu_mask, SD_INIT_NAME(DIE) },
+	{ NULL, },
+};
+
 /*
- * set_sched_topology() sets the topology internal to a CPU.  The
- * NUMA topologies are layered on top of it to build the full
- * system topology.
- *
- * If NUMA nodes are observed to occur within a CPU package, this
- * function should be called.  It forces the sched domain code to
- * only use the SMT level for the CPU portion of the topology.
- * This essentially falls back to relying on NUMA information
- * from the SRAT table to describe the entire system topology
- * (except for hyperthreads).
+ * Set if a package/die has multiple NUMA nodes inside.
+ * AMD Magny-Cours and Intel Cluster-on-Die have this.
  */
-static void primarily_use_numa_for_topology(void)
-{
-	set_sched_topology(numa_inside_package_topology);
-}
+static bool x86_has_numa_in_package;
 
 void set_cpu_sibling_map(int cpu)
 {
@@ -558,7 +559,7 @@ void set_cpu_sibling_map(int cpu)
 				c->booted_cores = cpu_data(i).booted_cores;
 		}
 		if (match_die(c, o) && !topology_same_node(c, o))
-			primarily_use_numa_for_topology();
+			x86_has_numa_in_package = true;
 	}
 
 	threads = cpumask_weight(topology_sibling_cpumask(cpu));
@@ -690,7 +691,7 @@ wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip)
 	 * Give the other CPU some time to accept the IPI.
 	 */
 	udelay(200);
-	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+	if (APIC_INTEGRATED(boot_cpu_apic_version)) {
 		maxlvt = lapic_get_maxlvt();
 		if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
@@ -717,7 +718,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	/*
 	 * Be paranoid about clearing APIC errors.
 	 */
-	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+	if (APIC_INTEGRATED(boot_cpu_apic_version)) {
 		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
@@ -756,7 +757,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	 * Determine this based on the APIC version.
 	 * If we don't have an integrated APIC, don't send the STARTUP IPIs.
 	 */
-	if (APIC_INTEGRATED(apic_version[phys_apicid]))
+	if (APIC_INTEGRATED(boot_cpu_apic_version))
 		num_starts = 2;
 	else
 		num_starts = 0;
@@ -942,7 +943,6 @@ void common_cpu_up(unsigned int cpu, struct task_struct *idle)
 	per_cpu(cpu_current_top_of_stack, cpu) =
 		(unsigned long)task_stack_page(idle) + THREAD_SIZE;
 #else
-	clear_tsk_thread_flag(idle, TIF_FORK);
 	initial_gs = per_cpu_offset(cpu);
 #endif
 }
@@ -969,7 +969,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
 
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	initial_code = (unsigned long)start_secondary;
-	stack_start  = idle->thread.sp;
+	initial_stack  = idle->thread.sp;
 
 	/*
 	 * Enable the espfix hack for this CPU
@@ -994,7 +994,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
 		/*
 		 * Be paranoid about clearing APIC errors.
 		*/
-		if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+		if (APIC_INTEGRATED(boot_cpu_apic_version)) {
 			apic_write(APIC_ESR, 0);
 			apic_read(APIC_ESR);
 		}
@@ -1115,17 +1115,8 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle)
 
 	common_cpu_up(cpu, tidle);
 
-	/*
-	 * We have to walk the irq descriptors to setup the vector
-	 * space for the cpu which comes online.  Prevent irq
-	 * alloc/free across the bringup.
-	 */
-	irq_lock_sparse();
-
 	err = do_boot_cpu(apicid, cpu, tidle);
-
 	if (err) {
-		irq_unlock_sparse();
 		pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu);
 		return -EIO;
 	}
@@ -1143,8 +1134,6 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle)
 		touch_nmi_watchdog();
 	}
 
-	irq_unlock_sparse();
-
 	return 0;
 }
 
@@ -1249,7 +1238,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 	/*
 	 * If we couldn't find a local APIC, then get out of here now!
 	 */
-	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+	if (APIC_INTEGRATED(boot_cpu_apic_version) &&
 	    !boot_cpu_has(X86_FEATURE_APIC)) {
 		if (!disable_apic) {
 			pr_err("BIOS bug, local APIC #%d not detected!...\n",
@@ -1304,6 +1293,16 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 		zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
 		zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL);
 	}
+
+	/*
+	 * Set 'default' x86 topology, this matches default_topology() in that
+	 * it has NUMA nodes as a topology level. See also
+	 * native_smp_cpus_done().
+	 *
+	 * Must be done before set_cpus_sibling_map() is ran.
+	 */
+	set_sched_topology(x86_topology);
+
 	set_cpu_sibling_map(0);
 
 	switch (smp_sanity_check(max_cpus)) {
@@ -1323,14 +1322,13 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 		break;
 	}
 
-	default_setup_apic_routing();
-
 	if (read_apic_id() != boot_cpu_physical_apicid) {
 		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
 		     read_apic_id(), boot_cpu_physical_apicid);
 		/* Or can we switch back to PIC here? */
 	}
 
+	default_setup_apic_routing();
 	cpu0_logical_apicid = apic_bsp_setup(false);
 
 	pr_info("CPU%d: ", 0);
@@ -1370,6 +1368,9 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 {
 	pr_debug("Boot done\n");
 
+	if (x86_has_numa_in_package)
+		set_sched_topology(x86_numa_in_package_topology);
+
 	nmi_selftest();
 	impress_friends();
 	setup_ioapic_dest();
@@ -1406,9 +1407,21 @@ __init void prefill_possible_map(void)
 {
 	int i, possible;
 
-	/* no processor from mptable or madt */
-	if (!num_processors)
-		num_processors = 1;
+	/* No boot processor was found in mptable or ACPI MADT */
+	if (!num_processors) {
+		int apicid = boot_cpu_physical_apicid;
+		int cpu = hard_smp_processor_id();
+
+		pr_warn("Boot CPU (id %d) not listed by BIOS\n", cpu);
+
+		/* Make sure boot cpu is enumerated */
+		if (apic->cpu_present_to_apicid(0) == BAD_APICID &&
+		    apic->apic_id_valid(apicid))
+			generic_processor_info(apicid, boot_cpu_apic_version);
+
+		if (!num_processors)
+			num_processors = 1;
+	}
 
 	i = setup_max_cpus ?: 1;
 	if (setup_possible_cpus == -1) {
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 4738f5e..0653788 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -8,80 +8,69 @@
 #include <linux/export.h>
 #include <linux/uaccess.h>
 #include <asm/stacktrace.h>
+#include <asm/unwind.h>
 
-static int save_stack_stack(void *data, char *name)
+static int save_stack_address(struct stack_trace *trace, unsigned long addr,
+			      bool nosched)
 {
-	return 0;
-}
-
-static int
-__save_stack_address(void *data, unsigned long addr, bool reliable, bool nosched)
-{
-	struct stack_trace *trace = data;
-#ifdef CONFIG_FRAME_POINTER
-	if (!reliable)
-		return 0;
-#endif
 	if (nosched && in_sched_functions(addr))
 		return 0;
+
 	if (trace->skip > 0) {
 		trace->skip--;
 		return 0;
 	}
-	if (trace->nr_entries < trace->max_entries) {
-		trace->entries[trace->nr_entries++] = addr;
-		return 0;
-	} else {
-		return -1; /* no more room, stop walking the stack */
-	}
-}
 
-static int save_stack_address(void *data, unsigned long addr, int reliable)
-{
-	return __save_stack_address(data, addr, reliable, false);
+	if (trace->nr_entries >= trace->max_entries)
+		return -1;
+
+	trace->entries[trace->nr_entries++] = addr;
+	return 0;
 }
 
-static int
-save_stack_address_nosched(void *data, unsigned long addr, int reliable)
+static void __save_stack_trace(struct stack_trace *trace,
+			       struct task_struct *task, struct pt_regs *regs,
+			       bool nosched)
 {
-	return __save_stack_address(data, addr, reliable, true);
-}
+	struct unwind_state state;
+	unsigned long addr;
 
-static const struct stacktrace_ops save_stack_ops = {
-	.stack		= save_stack_stack,
-	.address	= save_stack_address,
-	.walk_stack	= print_context_stack,
-};
+	if (regs)
+		save_stack_address(trace, regs->ip, nosched);
 
-static const struct stacktrace_ops save_stack_ops_nosched = {
-	.stack		= save_stack_stack,
-	.address	= save_stack_address_nosched,
-	.walk_stack	= print_context_stack,
-};
+	for (unwind_start(&state, task, regs, NULL); !unwind_done(&state);
+	     unwind_next_frame(&state)) {
+		addr = unwind_get_return_address(&state);
+		if (!addr || save_stack_address(trace, addr, nosched))
+			break;
+	}
+
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
 void save_stack_trace(struct stack_trace *trace)
 {
-	dump_trace(current, NULL, NULL, 0, &save_stack_ops, trace);
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = ULONG_MAX;
+	__save_stack_trace(trace, current, NULL, false);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
 {
-	dump_trace(current, regs, NULL, 0, &save_stack_ops, trace);
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = ULONG_MAX;
+	__save_stack_trace(trace, current, regs, false);
 }
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	dump_trace(tsk, NULL, NULL, 0, &save_stack_ops_nosched, trace);
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = ULONG_MAX;
+	if (!try_get_task_stack(tsk))
+		return;
+
+	__save_stack_trace(trace, tsk, NULL, true);
+
+	put_task_stack(tsk);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 10e0272..a55ed63 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -101,7 +101,6 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 			   unsigned long *end)
 {
 	if (!test_thread_flag(TIF_ADDR32) && (flags & MAP_32BIT)) {
-		unsigned long new_begin;
 		/* This is usually used needed to map code in small
 		   model, so it needs to be in the first 31bit. Limit
 		   it to that.  This means we need to move the
@@ -112,9 +111,7 @@ static void find_start_end(unsigned long flags, unsigned long *begin,
 		*begin = 0x40000000;
 		*end = 0x80000000;
 		if (current->flags & PF_RANDOMIZE) {
-			new_begin = randomize_range(*begin, *begin + 0x02000000, 0);
-			if (new_begin)
-				*begin = new_begin;
+			*begin = randomize_page(*begin, 0x02000000);
 		}
 	} else {
 		*begin = current->mm->mmap_legacy_base;
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 654f6c6..8402907 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -188,12 +188,12 @@ static int tboot_setup_sleep(void)
 
 	tboot->num_mac_regions = 0;
 
-	for (i = 0; i < e820.nr_map; i++) {
-		if ((e820.map[i].type != E820_RAM)
-		 && (e820.map[i].type != E820_RESERVED_KERN))
+	for (i = 0; i < e820->nr_map; i++) {
+		if ((e820->map[i].type != E820_RAM)
+		 && (e820->map[i].type != E820_RESERVED_KERN))
 			continue;
 
-		add_mac_region(e820.map[i].addr, e820.map[i].size);
+		add_mac_region(e820->map[i].addr, e820->map[i].size);
 	}
 
 	tboot->acpi_sinfo.kernel_s3_resume_vector =
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index b70ca12..bd4e3d4 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -292,12 +292,30 @@ DO_ERROR(X86_TRAP_NP,     SIGBUS,  "segment not present",	segment_not_present)
 DO_ERROR(X86_TRAP_SS,     SIGBUS,  "stack segment",		stack_segment)
 DO_ERROR(X86_TRAP_AC,     SIGBUS,  "alignment check",		alignment_check)
 
+#ifdef CONFIG_VMAP_STACK
+__visible void __noreturn handle_stack_overflow(const char *message,
+						struct pt_regs *regs,
+						unsigned long fault_address)
+{
+	printk(KERN_EMERG "BUG: stack guard page was hit at %p (stack is %p..%p)\n",
+		 (void *)fault_address, current->stack,
+		 (char *)current->stack + THREAD_SIZE - 1);
+	die(message, regs, 0);
+
+	/* Be absolutely certain we don't return. */
+	panic(message);
+}
+#endif
+
 #ifdef CONFIG_X86_64
 /* Runs on IST stack */
 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 {
 	static const char str[] = "double fault";
 	struct task_struct *tsk = current;
+#ifdef CONFIG_VMAP_STACK
+	unsigned long cr2;
+#endif
 
 #ifdef CONFIG_X86_ESPFIX64
 	extern unsigned char native_irq_return_iret[];
@@ -332,6 +350,49 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 	tsk->thread.error_code = error_code;
 	tsk->thread.trap_nr = X86_TRAP_DF;
 
+#ifdef CONFIG_VMAP_STACK
+	/*
+	 * If we overflow the stack into a guard page, the CPU will fail
+	 * to deliver #PF and will send #DF instead.  Similarly, if we
+	 * take any non-IST exception while too close to the bottom of
+	 * the stack, the processor will get a page fault while
+	 * delivering the exception and will generate a double fault.
+	 *
+	 * According to the SDM (footnote in 6.15 under "Interrupt 14 -
+	 * Page-Fault Exception (#PF):
+	 *
+	 *   Processors update CR2 whenever a page fault is detected. If a
+	 *   second page fault occurs while an earlier page fault is being
+	 *   deliv- ered, the faulting linear address of the second fault will
+	 *   overwrite the contents of CR2 (replacing the previous
+	 *   address). These updates to CR2 occur even if the page fault
+	 *   results in a double fault or occurs during the delivery of a
+	 *   double fault.
+	 *
+	 * The logic below has a small possibility of incorrectly diagnosing
+	 * some errors as stack overflows.  For example, if the IDT or GDT
+	 * gets corrupted such that #GP delivery fails due to a bad descriptor
+	 * causing #GP and we hit this condition while CR2 coincidentally
+	 * points to the stack guard page, we'll think we overflowed the
+	 * stack.  Given that we're going to panic one way or another
+	 * if this happens, this isn't necessarily worth fixing.
+	 *
+	 * If necessary, we could improve the test by only diagnosing
+	 * a stack overflow if the saved RSP points within 47 bytes of
+	 * the bottom of the stack: if RSP == tsk_stack + 48 and we
+	 * take an exception, the stack is already aligned and there
+	 * will be enough room SS, RSP, RFLAGS, CS, RIP, and a
+	 * possible error code, so a stack overflow would *not* double
+	 * fault.  With any less space left, exception delivery could
+	 * fail, and, as a practical matter, we've overflowed the
+	 * stack even if the actual trigger for the double fault was
+	 * something else.
+	 */
+	cr2 = read_cr2();
+	if ((unsigned long)task_stack_page(tsk) - 1 - cr2 < PAGE_SIZE)
+		handle_stack_overflow("kernel stack overflow (double-fault)", regs, cr2);
+#endif
+
 #ifdef CONFIG_DOUBLEFAULT
 	df_debug(regs, error_code);
 #endif
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 78b9cb5..46b2f41 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -23,6 +23,7 @@
 #include <asm/x86_init.h>
 #include <asm/geode.h>
 #include <asm/apic.h>
+#include <asm/intel-family.h>
 
 unsigned int __read_mostly cpu_khz;	/* TSC clocks / usec, not used here */
 EXPORT_SYMBOL(cpu_khz);
@@ -686,11 +687,16 @@ unsigned long native_calibrate_tsc(void)
 
 	if (crystal_khz == 0) {
 		switch (boot_cpu_data.x86_model) {
-		case 0x4E:	/* SKL */
-		case 0x5E:	/* SKL */
+		case INTEL_FAM6_SKYLAKE_MOBILE:
+		case INTEL_FAM6_SKYLAKE_DESKTOP:
+		case INTEL_FAM6_KABYLAKE_MOBILE:
+		case INTEL_FAM6_KABYLAKE_DESKTOP:
 			crystal_khz = 24000;	/* 24.0 MHz */
 			break;
-		case 0x5C:	/* BXT */
+		case INTEL_FAM6_SKYLAKE_X:
+			crystal_khz = 25000;	/* 25.0 MHz */
+			break;
+		case INTEL_FAM6_ATOM_GOLDMONT:
 			crystal_khz = 19200;	/* 19.2 MHz */
 			break;
 		}
diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c
new file mode 100644
index 0000000..a2456d4
--- /dev/null
+++ b/arch/x86/kernel/unwind_frame.c
@@ -0,0 +1,93 @@
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+#include <asm/bitops.h>
+#include <asm/stacktrace.h>
+#include <asm/unwind.h>
+
+#define FRAME_HEADER_SIZE (sizeof(long) * 2)
+
+unsigned long unwind_get_return_address(struct unwind_state *state)
+{
+	unsigned long addr;
+	unsigned long *addr_p = unwind_get_return_address_ptr(state);
+
+	if (unwind_done(state))
+		return 0;
+
+	addr = ftrace_graph_ret_addr(state->task, &state->graph_idx, *addr_p,
+				     addr_p);
+
+	return __kernel_text_address(addr) ? addr : 0;
+}
+EXPORT_SYMBOL_GPL(unwind_get_return_address);
+
+static bool update_stack_state(struct unwind_state *state, void *addr,
+			       size_t len)
+{
+	struct stack_info *info = &state->stack_info;
+
+	/*
+	 * If addr isn't on the current stack, switch to the next one.
+	 *
+	 * We may have to traverse multiple stacks to deal with the possibility
+	 * that 'info->next_sp' could point to an empty stack and 'addr' could
+	 * be on a subsequent stack.
+	 */
+	while (!on_stack(info, addr, len))
+		if (get_stack_info(info->next_sp, state->task, info,
+				   &state->stack_mask))
+			return false;
+
+	return true;
+}
+
+bool unwind_next_frame(struct unwind_state *state)
+{
+	unsigned long *next_bp;
+
+	if (unwind_done(state))
+		return false;
+
+	next_bp = (unsigned long *)*state->bp;
+
+	/* make sure the next frame's data is accessible */
+	if (!update_stack_state(state, next_bp, FRAME_HEADER_SIZE))
+		return false;
+
+	/* move to the next frame */
+	state->bp = next_bp;
+	return true;
+}
+EXPORT_SYMBOL_GPL(unwind_next_frame);
+
+void __unwind_start(struct unwind_state *state, struct task_struct *task,
+		    struct pt_regs *regs, unsigned long *first_frame)
+{
+	memset(state, 0, sizeof(*state));
+	state->task = task;
+
+	/* don't even attempt to start from user mode regs */
+	if (regs && user_mode(regs)) {
+		state->stack_info.type = STACK_TYPE_UNKNOWN;
+		return;
+	}
+
+	/* set up the starting stack frame */
+	state->bp = get_frame_pointer(task, regs);
+
+	/* initialize stack info and make sure the frame data is accessible */
+	get_stack_info(state->bp, state->task, &state->stack_info,
+		       &state->stack_mask);
+	update_stack_state(state, state->bp, FRAME_HEADER_SIZE);
+
+	/*
+	 * The caller can provide the address of the first frame directly
+	 * (first_frame) or indirectly (regs->sp) to indicate which stack frame
+	 * to start unwinding at.  Skip ahead until we reach it.
+	 */
+	while (!unwind_done(state) &&
+	       (!on_stack(&state->stack_info, first_frame, sizeof(long)) ||
+			state->bp < first_frame))
+		unwind_next_frame(state);
+}
+EXPORT_SYMBOL_GPL(__unwind_start);
diff --git a/arch/x86/kernel/unwind_guess.c b/arch/x86/kernel/unwind_guess.c
new file mode 100644
index 0000000..9298993
--- /dev/null
+++ b/arch/x86/kernel/unwind_guess.c
@@ -0,0 +1,53 @@
+#include <linux/sched.h>
+#include <linux/ftrace.h>
+#include <asm/ptrace.h>
+#include <asm/bitops.h>
+#include <asm/stacktrace.h>
+#include <asm/unwind.h>
+
+unsigned long unwind_get_return_address(struct unwind_state *state)
+{
+	if (unwind_done(state))
+		return 0;
+
+	return ftrace_graph_ret_addr(state->task, &state->graph_idx,
+				     *state->sp, state->sp);
+}
+EXPORT_SYMBOL_GPL(unwind_get_return_address);
+
+bool unwind_next_frame(struct unwind_state *state)
+{
+	struct stack_info *info = &state->stack_info;
+
+	if (unwind_done(state))
+		return false;
+
+	do {
+		for (state->sp++; state->sp < info->end; state->sp++)
+			if (__kernel_text_address(*state->sp))
+				return true;
+
+		state->sp = info->next_sp;
+
+	} while (!get_stack_info(state->sp, state->task, info,
+				 &state->stack_mask));
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(unwind_next_frame);
+
+void __unwind_start(struct unwind_state *state, struct task_struct *task,
+		    struct pt_regs *regs, unsigned long *first_frame)
+{
+	memset(state, 0, sizeof(*state));
+
+	state->task = task;
+	state->sp   = first_frame;
+
+	get_stack_info(first_frame, state->task, &state->stack_info,
+		       &state->stack_mask);
+
+	if (!__kernel_text_address(*first_frame))
+		unwind_next_frame(state);
+}
+EXPORT_SYMBOL_GPL(__unwind_start);
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 9297a00..dbf67f6 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -97,6 +97,7 @@ SECTIONS
 		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
+		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
 		ENTRY_TEXT
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 95e49f6..b2cee3d1 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -38,7 +38,7 @@ EXPORT_SYMBOL(__copy_user_nocache);
 EXPORT_SYMBOL(_copy_from_user);
 EXPORT_SYMBOL(_copy_to_user);
 
-EXPORT_SYMBOL_GPL(memcpy_mcsafe);
+EXPORT_SYMBOL_GPL(memcpy_mcsafe_unrolled);
 
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 76c5e52..0bd9f12 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -91,7 +91,7 @@ struct x86_cpuinit_ops x86_cpuinit = {
 static void default_nmi_init(void) { };
 static int default_i8042_detect(void) { return 1; };
 
-struct x86_platform_ops x86_platform = {
+struct x86_platform_ops x86_platform __ro_after_init = {
 	.calibrate_cpu			= native_calibrate_cpu,
 	.calibrate_tsc			= native_calibrate_tsc,
 	.get_wallclock			= mach_get_cmos_time,
@@ -108,7 +108,7 @@ struct x86_platform_ops x86_platform = {
 EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
-struct x86_msi_ops x86_msi = {
+struct x86_msi_ops x86_msi __ro_after_init = {
 	.setup_msi_irqs		= native_setup_msi_irqs,
 	.teardown_msi_irq	= native_teardown_msi_irq,
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
@@ -137,7 +137,7 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
-struct x86_io_apic_ops x86_io_apic_ops = {
+struct x86_io_apic_ops x86_io_apic_ops __ro_after_init = {
 	.read			= native_io_apic_read,
 	.disable		= native_disable_io_apic,
 };
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 464fa47..3bff207 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -13,7 +13,7 @@ kvm-$(CONFIG_KVM_ASYNC_PF)	+= $(KVM)/async_pf.o
 
 kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
 			   i8254.o ioapic.o irq_comm.o cpuid.o pmu.o mtrr.o \
-			   hyperv.o page_track.o
+			   hyperv.o page_track.o debugfs.o
 
 kvm-$(CONFIG_KVM_DEVICE_ASSIGNMENT)	+= assigned-dev.o iommu.o
 
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 3235e0f..afa7bbb 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -366,7 +366,8 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(FSGSBASE) | F(BMI1) | F(HLE) | F(AVX2) | F(SMEP) |
 		F(BMI2) | F(ERMS) | f_invpcid | F(RTM) | f_mpx | F(RDSEED) |
 		F(ADX) | F(SMAP) | F(AVX512F) | F(AVX512PF) | F(AVX512ER) |
-		F(AVX512CD) | F(CLFLUSHOPT) | F(CLWB);
+		F(AVX512CD) | F(CLFLUSHOPT) | F(CLWB) | F(AVX512DQ) |
+		F(AVX512BW) | F(AVX512VL);
 
 	/* cpuid 0xD.1.eax */
 	const u32 kvm_cpuid_D_1_eax_x86_features =
diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c
new file mode 100644
index 0000000..c19c7ed
--- /dev/null
+++ b/arch/x86/kvm/debugfs.c
@@ -0,0 +1,69 @@
+/*
+ * Kernel-based Virtual Machine driver for Linux
+ *
+ * Copyright 2016 Red Hat, Inc. and/or its affiliates.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+#include <linux/kvm_host.h>
+#include <linux/debugfs.h>
+
+bool kvm_arch_has_vcpu_debugfs(void)
+{
+	return true;
+}
+
+static int vcpu_get_tsc_offset(void *data, u64 *val)
+{
+	struct kvm_vcpu *vcpu = (struct kvm_vcpu *) data;
+	*val = vcpu->arch.tsc_offset;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vcpu_tsc_offset_fops, vcpu_get_tsc_offset, NULL, "%lld\n");
+
+static int vcpu_get_tsc_scaling_ratio(void *data, u64 *val)
+{
+	struct kvm_vcpu *vcpu = (struct kvm_vcpu *) data;
+	*val = vcpu->arch.tsc_scaling_ratio;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vcpu_tsc_scaling_fops, vcpu_get_tsc_scaling_ratio, NULL, "%llu\n");
+
+static int vcpu_get_tsc_scaling_frac_bits(void *data, u64 *val)
+{
+	*val = kvm_tsc_scaling_ratio_frac_bits;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vcpu_tsc_scaling_frac_fops, vcpu_get_tsc_scaling_frac_bits, NULL, "%llu\n");
+
+int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu)
+{
+	struct dentry *ret;
+
+	ret = debugfs_create_file("tsc-offset", 0444,
+							vcpu->debugfs_dentry,
+							vcpu, &vcpu_tsc_offset_fops);
+	if (!ret)
+		return -ENOMEM;
+
+	if (kvm_has_tsc_control) {
+		ret = debugfs_create_file("tsc-scaling-ratio", 0444,
+							vcpu->debugfs_dentry,
+							vcpu, &vcpu_tsc_scaling_fops);
+		if (!ret)
+			return -ENOMEM;
+		ret = debugfs_create_file("tsc-scaling-ratio-frac-bits", 0444,
+							vcpu->debugfs_dentry,
+							vcpu, &vcpu_tsc_scaling_frac_fops);
+		if (!ret)
+			return -ENOMEM;
+
+	}
+
+	return 0;
+}
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 01bd7b7..42b1c83 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -386,7 +386,21 @@ static void synic_init(struct kvm_vcpu_hv_synic *synic)
 
 static u64 get_time_ref_counter(struct kvm *kvm)
 {
-	return div_u64(get_kernel_ns() + kvm->arch.kvmclock_offset, 100);
+	struct kvm_hv *hv = &kvm->arch.hyperv;
+	struct kvm_vcpu *vcpu;
+	u64 tsc;
+
+	/*
+	 * The guest has not set up the TSC page or the clock isn't
+	 * stable, fall back to get_kvmclock_ns.
+	 */
+	if (!hv->tsc_ref.tsc_sequence)
+		return div_u64(get_kvmclock_ns(kvm), 100);
+
+	vcpu = kvm_get_vcpu(kvm, 0);
+	tsc = kvm_read_l1_tsc(vcpu, rdtsc());
+	return mul_u64_u64_shr(tsc, hv->tsc_ref.tsc_scale, 64)
+		+ hv->tsc_ref.tsc_offset;
 }
 
 static void stimer_mark_pending(struct kvm_vcpu_hv_stimer *stimer,
@@ -756,6 +770,129 @@ static int kvm_hv_msr_set_crash_data(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+/*
+ * The kvmclock and Hyper-V TSC page use similar formulas, and converting
+ * between them is possible:
+ *
+ * kvmclock formula:
+ *    nsec = (ticks - tsc_timestamp) * tsc_to_system_mul * 2^(tsc_shift-32)
+ *           + system_time
+ *
+ * Hyper-V formula:
+ *    nsec/100 = ticks * scale / 2^64 + offset
+ *
+ * When tsc_timestamp = system_time = 0, offset is zero in the Hyper-V formula.
+ * By dividing the kvmclock formula by 100 and equating what's left we get:
+ *    ticks * scale / 2^64 = ticks * tsc_to_system_mul * 2^(tsc_shift-32) / 100
+ *            scale / 2^64 =         tsc_to_system_mul * 2^(tsc_shift-32) / 100
+ *            scale        =         tsc_to_system_mul * 2^(32+tsc_shift) / 100
+ *
+ * Now expand the kvmclock formula and divide by 100:
+ *    nsec = ticks * tsc_to_system_mul * 2^(tsc_shift-32)
+ *           - tsc_timestamp * tsc_to_system_mul * 2^(tsc_shift-32)
+ *           + system_time
+ *    nsec/100 = ticks * tsc_to_system_mul * 2^(tsc_shift-32) / 100
+ *               - tsc_timestamp * tsc_to_system_mul * 2^(tsc_shift-32) / 100
+ *               + system_time / 100
+ *
+ * Replace tsc_to_system_mul * 2^(tsc_shift-32) / 100 by scale / 2^64:
+ *    nsec/100 = ticks * scale / 2^64
+ *               - tsc_timestamp * scale / 2^64
+ *               + system_time / 100
+ *
+ * Equate with the Hyper-V formula so that ticks * scale / 2^64 cancels out:
+ *    offset = system_time / 100 - tsc_timestamp * scale / 2^64
+ *
+ * These two equivalencies are implemented in this function.
+ */
+static bool compute_tsc_page_parameters(struct pvclock_vcpu_time_info *hv_clock,
+					HV_REFERENCE_TSC_PAGE *tsc_ref)
+{
+	u64 max_mul;
+
+	if (!(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT))
+		return false;
+
+	/*
+	 * check if scale would overflow, if so we use the time ref counter
+	 *    tsc_to_system_mul * 2^(tsc_shift+32) / 100 >= 2^64
+	 *    tsc_to_system_mul / 100 >= 2^(32-tsc_shift)
+	 *    tsc_to_system_mul >= 100 * 2^(32-tsc_shift)
+	 */
+	max_mul = 100ull << (32 - hv_clock->tsc_shift);
+	if (hv_clock->tsc_to_system_mul >= max_mul)
+		return false;
+
+	/*
+	 * Otherwise compute the scale and offset according to the formulas
+	 * derived above.
+	 */
+	tsc_ref->tsc_scale =
+		mul_u64_u32_div(1ULL << (32 + hv_clock->tsc_shift),
+				hv_clock->tsc_to_system_mul,
+				100);
+
+	tsc_ref->tsc_offset = hv_clock->system_time;
+	do_div(tsc_ref->tsc_offset, 100);
+	tsc_ref->tsc_offset -=
+		mul_u64_u64_shr(hv_clock->tsc_timestamp, tsc_ref->tsc_scale, 64);
+	return true;
+}
+
+void kvm_hv_setup_tsc_page(struct kvm *kvm,
+			   struct pvclock_vcpu_time_info *hv_clock)
+{
+	struct kvm_hv *hv = &kvm->arch.hyperv;
+	u32 tsc_seq;
+	u64 gfn;
+
+	BUILD_BUG_ON(sizeof(tsc_seq) != sizeof(hv->tsc_ref.tsc_sequence));
+	BUILD_BUG_ON(offsetof(HV_REFERENCE_TSC_PAGE, tsc_sequence) != 0);
+
+	if (!(hv->hv_tsc_page & HV_X64_MSR_TSC_REFERENCE_ENABLE))
+		return;
+
+	gfn = hv->hv_tsc_page >> HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT;
+	/*
+	 * Because the TSC parameters only vary when there is a
+	 * change in the master clock, do not bother with caching.
+	 */
+	if (unlikely(kvm_read_guest(kvm, gfn_to_gpa(gfn),
+				    &tsc_seq, sizeof(tsc_seq))))
+		return;
+
+	/*
+	 * While we're computing and writing the parameters, force the
+	 * guest to use the time reference count MSR.
+	 */
+	hv->tsc_ref.tsc_sequence = 0;
+	if (kvm_write_guest(kvm, gfn_to_gpa(gfn),
+			    &hv->tsc_ref, sizeof(hv->tsc_ref.tsc_sequence)))
+		return;
+
+	if (!compute_tsc_page_parameters(hv_clock, &hv->tsc_ref))
+		return;
+
+	/* Ensure sequence is zero before writing the rest of the struct.  */
+	smp_wmb();
+	if (kvm_write_guest(kvm, gfn_to_gpa(gfn), &hv->tsc_ref, sizeof(hv->tsc_ref)))
+		return;
+
+	/*
+	 * Now switch to the TSC page mechanism by writing the sequence.
+	 */
+	tsc_seq++;
+	if (tsc_seq == 0xFFFFFFFF || tsc_seq == 0)
+		tsc_seq = 1;
+
+	/* Write the struct entirely before the non-zero sequence.  */
+	smp_wmb();
+
+	hv->tsc_ref.tsc_sequence = tsc_seq;
+	kvm_write_guest(kvm, gfn_to_gpa(gfn),
+			&hv->tsc_ref, sizeof(hv->tsc_ref.tsc_sequence));
+}
+
 static int kvm_hv_set_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data,
 			     bool host)
 {
@@ -793,23 +930,11 @@ static int kvm_hv_set_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data,
 		mark_page_dirty(kvm, gfn);
 		break;
 	}
-	case HV_X64_MSR_REFERENCE_TSC: {
-		u64 gfn;
-		HV_REFERENCE_TSC_PAGE tsc_ref;
-
-		memset(&tsc_ref, 0, sizeof(tsc_ref));
+	case HV_X64_MSR_REFERENCE_TSC:
 		hv->hv_tsc_page = data;
-		if (!(data & HV_X64_MSR_TSC_REFERENCE_ENABLE))
-			break;
-		gfn = data >> HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT;
-		if (kvm_write_guest(
-				kvm,
-				gfn << HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT,
-				&tsc_ref, sizeof(tsc_ref)))
-			return 1;
-		mark_page_dirty(kvm, gfn);
+		if (hv->hv_tsc_page & HV_X64_MSR_TSC_REFERENCE_ENABLE)
+			kvm_make_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
 		break;
-	}
 	case HV_X64_MSR_CRASH_P0 ... HV_X64_MSR_CRASH_P4:
 		return kvm_hv_msr_set_crash_data(vcpu,
 						 msr - HV_X64_MSR_CRASH_P0,
diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index 60eccd4..cd11195 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -84,4 +84,7 @@ static inline bool kvm_hv_has_stimer_pending(struct kvm_vcpu *vcpu)
 
 void kvm_hv_process_stimers(struct kvm_vcpu *vcpu);
 
+void kvm_hv_setup_tsc_page(struct kvm *kvm,
+			   struct pvclock_vcpu_time_info *hv_clock);
+
 #endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 5fb6c62..16a7134 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -212,7 +212,7 @@ static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 	 */
 	smp_mb();
 	if (atomic_dec_if_positive(&ps->pending) > 0)
-		queue_kthread_work(&pit->worker, &pit->expired);
+		kthread_queue_work(&pit->worker, &pit->expired);
 }
 
 void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
@@ -233,7 +233,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 static void destroy_pit_timer(struct kvm_pit *pit)
 {
 	hrtimer_cancel(&pit->pit_state.timer);
-	flush_kthread_work(&pit->expired);
+	kthread_flush_work(&pit->expired);
 }
 
 static void pit_do_work(struct kthread_work *work)
@@ -272,7 +272,7 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 	if (atomic_read(&ps->reinject))
 		atomic_inc(&ps->pending);
 
-	queue_kthread_work(&pt->worker, &pt->expired);
+	kthread_queue_work(&pt->worker, &pt->expired);
 
 	if (ps->is_periodic) {
 		hrtimer_add_expires_ns(&ps->timer, ps->period);
@@ -324,7 +324,7 @@ static void create_pit_timer(struct kvm_pit *pit, u32 val, int is_period)
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&ps->timer);
-	flush_kthread_work(&pit->expired);
+	kthread_flush_work(&pit->expired);
 	ps->period = interval;
 	ps->is_periodic = is_period;
 
@@ -667,13 +667,13 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	pid_nr = pid_vnr(pid);
 	put_pid(pid);
 
-	init_kthread_worker(&pit->worker);
+	kthread_init_worker(&pit->worker);
 	pit->worker_task = kthread_run(kthread_worker_fn, &pit->worker,
 				       "kvm-pit/%d", pid_nr);
 	if (IS_ERR(pit->worker_task))
 		goto fail_kthread;
 
-	init_kthread_work(&pit->expired, pit_do_work);
+	kthread_init_work(&pit->expired, pit_do_work);
 
 	pit->kvm = kvm;
 
@@ -730,7 +730,7 @@ void kvm_free_pit(struct kvm *kvm)
 		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->speaker_dev);
 		kvm_pit_set_reinject(pit, false);
 		hrtimer_cancel(&pit->pit_state.timer);
-		flush_kthread_work(&pit->expired);
+		kthread_flush_work(&pit->expired);
 		kthread_stop(pit->worker_task);
 		kvm_free_irq_source_id(kvm, pit->irq_source_id);
 		kfree(pit);
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 5f42d03..c7220ba 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -109,6 +109,7 @@ static void __rtc_irq_eoi_tracking_restore_one(struct kvm_vcpu *vcpu)
 {
 	bool new_val, old_val;
 	struct kvm_ioapic *ioapic = vcpu->kvm->arch.vioapic;
+	struct dest_map *dest_map = &ioapic->rtc_status.dest_map;
 	union kvm_ioapic_redirect_entry *e;
 
 	e = &ioapic->redirtbl[RTC_GSI];
@@ -117,16 +118,17 @@ static void __rtc_irq_eoi_tracking_restore_one(struct kvm_vcpu *vcpu)
 		return;
 
 	new_val = kvm_apic_pending_eoi(vcpu, e->fields.vector);
-	old_val = test_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map.map);
+	old_val = test_bit(vcpu->vcpu_id, dest_map->map);
 
 	if (new_val == old_val)
 		return;
 
 	if (new_val) {
-		__set_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map.map);
+		__set_bit(vcpu->vcpu_id, dest_map->map);
+		dest_map->vectors[vcpu->vcpu_id] = e->fields.vector;
 		ioapic->rtc_status.pending_eoi++;
 	} else {
-		__clear_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map.map);
+		__clear_bit(vcpu->vcpu_id, dest_map->map);
 		ioapic->rtc_status.pending_eoi--;
 		rtc_status_pending_eoi_check_valid(ioapic);
 	}
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index b62c852..23b99f3 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1761,9 +1761,10 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		if (value & MSR_IA32_APICBASE_ENABLE) {
 			kvm_apic_set_xapic_id(apic, vcpu->vcpu_id);
 			static_key_slow_dec_deferred(&apic_hw_disabled);
-		} else
+		} else {
 			static_key_slow_inc(&apic_hw_disabled.key);
-		recalculate_apic_map(vcpu->kvm);
+			recalculate_apic_map(vcpu->kvm);
+		}
 	}
 
 	if ((old_value ^ value) & X2APIC_ENABLE) {
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 3d4cc8cc..d9c7e98 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1207,7 +1207,7 @@ static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep)
  *
  * Return true if tlb need be flushed.
  */
-static bool spte_write_protect(struct kvm *kvm, u64 *sptep, bool pt_protect)
+static bool spte_write_protect(u64 *sptep, bool pt_protect)
 {
 	u64 spte = *sptep;
 
@@ -1233,12 +1233,12 @@ static bool __rmap_write_protect(struct kvm *kvm,
 	bool flush = false;
 
 	for_each_rmap_spte(rmap_head, &iter, sptep)
-		flush |= spte_write_protect(kvm, sptep, pt_protect);
+		flush |= spte_write_protect(sptep, pt_protect);
 
 	return flush;
 }
 
-static bool spte_clear_dirty(struct kvm *kvm, u64 *sptep)
+static bool spte_clear_dirty(u64 *sptep)
 {
 	u64 spte = *sptep;
 
@@ -1256,12 +1256,12 @@ static bool __rmap_clear_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
 	bool flush = false;
 
 	for_each_rmap_spte(rmap_head, &iter, sptep)
-		flush |= spte_clear_dirty(kvm, sptep);
+		flush |= spte_clear_dirty(sptep);
 
 	return flush;
 }
 
-static bool spte_set_dirty(struct kvm *kvm, u64 *sptep)
+static bool spte_set_dirty(u64 *sptep)
 {
 	u64 spte = *sptep;
 
@@ -1279,7 +1279,7 @@ static bool __rmap_set_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
 	bool flush = false;
 
 	for_each_rmap_spte(rmap_head, &iter, sptep)
-		flush |= spte_set_dirty(kvm, sptep);
+		flush |= spte_set_dirty(sptep);
 
 	return flush;
 }
diff --git a/arch/x86/kvm/pmu_amd.c b/arch/x86/kvm/pmu_amd.c
index 39b9112..cd94443 100644
--- a/arch/x86/kvm/pmu_amd.c
+++ b/arch/x86/kvm/pmu_amd.c
@@ -23,8 +23,8 @@
 static struct kvm_event_hw_type_mapping amd_event_mapping[] = {
 	[0] = { 0x76, 0x00, PERF_COUNT_HW_CPU_CYCLES },
 	[1] = { 0xc0, 0x00, PERF_COUNT_HW_INSTRUCTIONS },
-	[2] = { 0x80, 0x00, PERF_COUNT_HW_CACHE_REFERENCES },
-	[3] = { 0x81, 0x00, PERF_COUNT_HW_CACHE_MISSES },
+	[2] = { 0x7d, 0x07, PERF_COUNT_HW_CACHE_REFERENCES },
+	[3] = { 0x7e, 0x07, PERF_COUNT_HW_CACHE_MISSES },
 	[4] = { 0xc2, 0x00, PERF_COUNT_HW_BRANCH_INSTRUCTIONS },
 	[5] = { 0xc3, 0x00, PERF_COUNT_HW_BRANCH_MISSES },
 	[6] = { 0xd0, 0x00, PERF_COUNT_HW_STALLED_CYCLES_FRONTEND },
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index af523d8..f8157a3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -34,6 +34,8 @@
 #include <linux/sched.h>
 #include <linux/trace_events.h>
 #include <linux/slab.h>
+#include <linux/amd-iommu.h>
+#include <linux/hashtable.h>
 
 #include <asm/apic.h>
 #include <asm/perf_event.h>
@@ -41,6 +43,7 @@
 #include <asm/desc.h>
 #include <asm/debugreg.h>
 #include <asm/kvm_para.h>
+#include <asm/irq_remapping.h>
 
 #include <asm/virtext.h>
 #include "trace.h"
@@ -96,6 +99,19 @@ MODULE_DEVICE_TABLE(x86cpu, svm_cpu_id);
 #define AVIC_UNACCEL_ACCESS_OFFSET_MASK		0xFF0
 #define AVIC_UNACCEL_ACCESS_VECTOR_MASK		0xFFFFFFFF
 
+/* AVIC GATAG is encoded using VM and VCPU IDs */
+#define AVIC_VCPU_ID_BITS		8
+#define AVIC_VCPU_ID_MASK		((1 << AVIC_VCPU_ID_BITS) - 1)
+
+#define AVIC_VM_ID_BITS			24
+#define AVIC_VM_ID_NR			(1 << AVIC_VM_ID_BITS)
+#define AVIC_VM_ID_MASK			((1 << AVIC_VM_ID_BITS) - 1)
+
+#define AVIC_GATAG(x, y)		(((x & AVIC_VM_ID_MASK) << AVIC_VCPU_ID_BITS) | \
+						(y & AVIC_VCPU_ID_MASK))
+#define AVIC_GATAG_TO_VMID(x)		((x >> AVIC_VCPU_ID_BITS) & AVIC_VM_ID_MASK)
+#define AVIC_GATAG_TO_VCPUID(x)		(x & AVIC_VCPU_ID_MASK)
+
 static bool erratum_383_found __read_mostly;
 
 static const u32 host_save_user_msrs[] = {
@@ -185,6 +201,23 @@ struct vcpu_svm {
 	struct page *avic_backing_page;
 	u64 *avic_physical_id_cache;
 	bool avic_is_running;
+
+	/*
+	 * Per-vcpu list of struct amd_svm_iommu_ir:
+	 * This is used mainly to store interrupt remapping information used
+	 * when update the vcpu affinity. This avoids the need to scan for
+	 * IRTE and try to match ga_tag in the IOMMU driver.
+	 */
+	struct list_head ir_list;
+	spinlock_t ir_list_lock;
+};
+
+/*
+ * This is a wrapper of struct amd_iommu_ir_data.
+ */
+struct amd_svm_iommu_ir {
+	struct list_head node;	/* Used by SVM for per-vcpu ir_list */
+	void *data;		/* Storing pointer to struct amd_ir_data */
 };
 
 #define AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK	(0xFF)
@@ -242,6 +275,10 @@ static int avic;
 module_param(avic, int, S_IRUGO);
 #endif
 
+/* AVIC VM ID bit masks and lock */
+static DECLARE_BITMAP(avic_vm_id_bitmap, AVIC_VM_ID_NR);
+static DEFINE_SPINLOCK(avic_vm_id_lock);
+
 static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 static void svm_complete_interrupts(struct vcpu_svm *svm);
@@ -928,6 +965,55 @@ static void svm_disable_lbrv(struct vcpu_svm *svm)
 	set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
 }
 
+/* Note:
+ * This hash table is used to map VM_ID to a struct kvm_arch,
+ * when handling AMD IOMMU GALOG notification to schedule in
+ * a particular vCPU.
+ */
+#define SVM_VM_DATA_HASH_BITS	8
+DECLARE_HASHTABLE(svm_vm_data_hash, SVM_VM_DATA_HASH_BITS);
+static spinlock_t svm_vm_data_hash_lock;
+
+/* Note:
+ * This function is called from IOMMU driver to notify
+ * SVM to schedule in a particular vCPU of a particular VM.
+ */
+static int avic_ga_log_notifier(u32 ga_tag)
+{
+	unsigned long flags;
+	struct kvm_arch *ka = NULL;
+	struct kvm_vcpu *vcpu = NULL;
+	u32 vm_id = AVIC_GATAG_TO_VMID(ga_tag);
+	u32 vcpu_id = AVIC_GATAG_TO_VCPUID(ga_tag);
+
+	pr_debug("SVM: %s: vm_id=%#x, vcpu_id=%#x\n", __func__, vm_id, vcpu_id);
+
+	spin_lock_irqsave(&svm_vm_data_hash_lock, flags);
+	hash_for_each_possible(svm_vm_data_hash, ka, hnode, vm_id) {
+		struct kvm *kvm = container_of(ka, struct kvm, arch);
+		struct kvm_arch *vm_data = &kvm->arch;
+
+		if (vm_data->avic_vm_id != vm_id)
+			continue;
+		vcpu = kvm_get_vcpu_by_id(kvm, vcpu_id);
+		break;
+	}
+	spin_unlock_irqrestore(&svm_vm_data_hash_lock, flags);
+
+	if (!vcpu)
+		return 0;
+
+	/* Note:
+	 * At this point, the IOMMU should have already set the pending
+	 * bit in the vAPIC backing page. So, we just need to schedule
+	 * in the vcpu.
+	 */
+	if (vcpu->mode == OUTSIDE_GUEST_MODE)
+		kvm_vcpu_wake_up(vcpu);
+
+	return 0;
+}
+
 static __init int svm_hardware_setup(void)
 {
 	int cpu;
@@ -986,10 +1072,15 @@ static __init int svm_hardware_setup(void)
 	if (avic) {
 		if (!npt_enabled ||
 		    !boot_cpu_has(X86_FEATURE_AVIC) ||
-		    !IS_ENABLED(CONFIG_X86_LOCAL_APIC))
+		    !IS_ENABLED(CONFIG_X86_LOCAL_APIC)) {
 			avic = false;
-		else
+		} else {
 			pr_info("AVIC enabled\n");
+
+			hash_init(svm_vm_data_hash);
+			spin_lock_init(&svm_vm_data_hash_lock);
+			amd_iommu_register_ga_log_notifier(&avic_ga_log_notifier);
+		}
 	}
 
 	return 0;
@@ -1028,13 +1119,6 @@ static void init_sys_seg(struct vmcb_seg *seg, uint32_t type)
 	seg->base = 0;
 }
 
-static u64 svm_read_tsc_offset(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	return svm->vmcb->control.tsc_offset;
-}
-
 static void svm_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1280,19 +1364,55 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+static inline int avic_get_next_vm_id(void)
+{
+	int id;
+
+	spin_lock(&avic_vm_id_lock);
+
+	/* AVIC VM ID is one-based. */
+	id = find_next_zero_bit(avic_vm_id_bitmap, AVIC_VM_ID_NR, 1);
+	if (id <= AVIC_VM_ID_MASK)
+		__set_bit(id, avic_vm_id_bitmap);
+	else
+		id = -EAGAIN;
+
+	spin_unlock(&avic_vm_id_lock);
+	return id;
+}
+
+static inline int avic_free_vm_id(int id)
+{
+	if (id <= 0 || id > AVIC_VM_ID_MASK)
+		return -EINVAL;
+
+	spin_lock(&avic_vm_id_lock);
+	__clear_bit(id, avic_vm_id_bitmap);
+	spin_unlock(&avic_vm_id_lock);
+	return 0;
+}
+
 static void avic_vm_destroy(struct kvm *kvm)
 {
+	unsigned long flags;
 	struct kvm_arch *vm_data = &kvm->arch;
 
+	avic_free_vm_id(vm_data->avic_vm_id);
+
 	if (vm_data->avic_logical_id_table_page)
 		__free_page(vm_data->avic_logical_id_table_page);
 	if (vm_data->avic_physical_id_table_page)
 		__free_page(vm_data->avic_physical_id_table_page);
+
+	spin_lock_irqsave(&svm_vm_data_hash_lock, flags);
+	hash_del(&vm_data->hnode);
+	spin_unlock_irqrestore(&svm_vm_data_hash_lock, flags);
 }
 
 static int avic_vm_init(struct kvm *kvm)
 {
-	int err = -ENOMEM;
+	unsigned long flags;
+	int vm_id, err = -ENOMEM;
 	struct kvm_arch *vm_data = &kvm->arch;
 	struct page *p_page;
 	struct page *l_page;
@@ -1300,6 +1420,11 @@ static int avic_vm_init(struct kvm *kvm)
 	if (!avic)
 		return 0;
 
+	vm_id = avic_get_next_vm_id();
+	if (vm_id < 0)
+		return vm_id;
+	vm_data->avic_vm_id = (u32)vm_id;
+
 	/* Allocating physical APIC ID table (4KB) */
 	p_page = alloc_page(GFP_KERNEL);
 	if (!p_page)
@@ -1316,6 +1441,10 @@ static int avic_vm_init(struct kvm *kvm)
 	vm_data->avic_logical_id_table_page = l_page;
 	clear_page(page_address(l_page));
 
+	spin_lock_irqsave(&svm_vm_data_hash_lock, flags);
+	hash_add(svm_vm_data_hash, &vm_data->hnode, vm_data->avic_vm_id);
+	spin_unlock_irqrestore(&svm_vm_data_hash_lock, flags);
+
 	return 0;
 
 free_avic:
@@ -1323,31 +1452,34 @@ free_avic:
 	return err;
 }
 
-/**
- * This function is called during VCPU halt/unhalt.
- */
-static void avic_set_running(struct kvm_vcpu *vcpu, bool is_run)
+static inline int
+avic_update_iommu_vcpu_affinity(struct kvm_vcpu *vcpu, int cpu, bool r)
 {
-	u64 entry;
-	int h_physical_id = kvm_cpu_get_apicid(vcpu->cpu);
+	int ret = 0;
+	unsigned long flags;
+	struct amd_svm_iommu_ir *ir;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (!kvm_vcpu_apicv_active(vcpu))
-		return;
-
-	svm->avic_is_running = is_run;
+	if (!kvm_arch_has_assigned_device(vcpu->kvm))
+		return 0;
 
-	/* ID = 0xff (broadcast), ID > 0xff (reserved) */
-	if (WARN_ON(h_physical_id >= AVIC_MAX_PHYSICAL_ID_COUNT))
-		return;
+	/*
+	 * Here, we go through the per-vcpu ir_list to update all existing
+	 * interrupt remapping table entry targeting this vcpu.
+	 */
+	spin_lock_irqsave(&svm->ir_list_lock, flags);
 
-	entry = READ_ONCE(*(svm->avic_physical_id_cache));
-	WARN_ON(is_run == !!(entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK));
+	if (list_empty(&svm->ir_list))
+		goto out;
 
-	entry &= ~AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
-	if (is_run)
-		entry |= AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
-	WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
+	list_for_each_entry(ir, &svm->ir_list, node) {
+		ret = amd_iommu_update_ga(cpu, r, ir->data);
+		if (ret)
+			break;
+	}
+out:
+	spin_unlock_irqrestore(&svm->ir_list_lock, flags);
+	return ret;
 }
 
 static void avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
@@ -1374,6 +1506,8 @@ static void avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		entry |= AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
 
 	WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
+	avic_update_iommu_vcpu_affinity(vcpu, h_physical_id,
+					svm->avic_is_running);
 }
 
 static void avic_vcpu_put(struct kvm_vcpu *vcpu)
@@ -1385,10 +1519,27 @@ static void avic_vcpu_put(struct kvm_vcpu *vcpu)
 		return;
 
 	entry = READ_ONCE(*(svm->avic_physical_id_cache));
+	if (entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK)
+		avic_update_iommu_vcpu_affinity(vcpu, -1, 0);
+
 	entry &= ~AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK;
 	WRITE_ONCE(*(svm->avic_physical_id_cache), entry);
 }
 
+/**
+ * This function is called during VCPU halt/unhalt.
+ */
+static void avic_set_running(struct kvm_vcpu *vcpu, bool is_run)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	svm->avic_is_running = is_run;
+	if (is_run)
+		avic_vcpu_load(vcpu, vcpu->cpu);
+	else
+		avic_vcpu_put(vcpu);
+}
+
 static void svm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1450,6 +1601,9 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 		err = avic_init_backing_page(&svm->vcpu);
 		if (err)
 			goto free_page4;
+
+		INIT_LIST_HEAD(&svm->ir_list);
+		spin_lock_init(&svm->ir_list_lock);
 	}
 
 	/* We initialize this flag to true to make sure that the is_running
@@ -4246,6 +4400,209 @@ static void svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec)
 		kvm_vcpu_wake_up(vcpu);
 }
 
+static void svm_ir_list_del(struct vcpu_svm *svm, struct amd_iommu_pi_data *pi)
+{
+	unsigned long flags;
+	struct amd_svm_iommu_ir *cur;
+
+	spin_lock_irqsave(&svm->ir_list_lock, flags);
+	list_for_each_entry(cur, &svm->ir_list, node) {
+		if (cur->data != pi->ir_data)
+			continue;
+		list_del(&cur->node);
+		kfree(cur);
+		break;
+	}
+	spin_unlock_irqrestore(&svm->ir_list_lock, flags);
+}
+
+static int svm_ir_list_add(struct vcpu_svm *svm, struct amd_iommu_pi_data *pi)
+{
+	int ret = 0;
+	unsigned long flags;
+	struct amd_svm_iommu_ir *ir;
+
+	/**
+	 * In some cases, the existing irte is updaed and re-set,
+	 * so we need to check here if it's already been * added
+	 * to the ir_list.
+	 */
+	if (pi->ir_data && (pi->prev_ga_tag != 0)) {
+		struct kvm *kvm = svm->vcpu.kvm;
+		u32 vcpu_id = AVIC_GATAG_TO_VCPUID(pi->prev_ga_tag);
+		struct kvm_vcpu *prev_vcpu = kvm_get_vcpu_by_id(kvm, vcpu_id);
+		struct vcpu_svm *prev_svm;
+
+		if (!prev_vcpu) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		prev_svm = to_svm(prev_vcpu);
+		svm_ir_list_del(prev_svm, pi);
+	}
+
+	/**
+	 * Allocating new amd_iommu_pi_data, which will get
+	 * add to the per-vcpu ir_list.
+	 */
+	ir = kzalloc(sizeof(struct amd_svm_iommu_ir), GFP_KERNEL);
+	if (!ir) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	ir->data = pi->ir_data;
+
+	spin_lock_irqsave(&svm->ir_list_lock, flags);
+	list_add(&ir->node, &svm->ir_list);
+	spin_unlock_irqrestore(&svm->ir_list_lock, flags);
+out:
+	return ret;
+}
+
+/**
+ * Note:
+ * The HW cannot support posting multicast/broadcast
+ * interrupts to a vCPU. So, we still use legacy interrupt
+ * remapping for these kind of interrupts.
+ *
+ * For lowest-priority interrupts, we only support
+ * those with single CPU as the destination, e.g. user
+ * configures the interrupts via /proc/irq or uses
+ * irqbalance to make the interrupts single-CPU.
+ */
+static int
+get_pi_vcpu_info(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e,
+		 struct vcpu_data *vcpu_info, struct vcpu_svm **svm)
+{
+	struct kvm_lapic_irq irq;
+	struct kvm_vcpu *vcpu = NULL;
+
+	kvm_set_msi_irq(kvm, e, &irq);
+
+	if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu)) {
+		pr_debug("SVM: %s: use legacy intr remap mode for irq %u\n",
+			 __func__, irq.vector);
+		return -1;
+	}
+
+	pr_debug("SVM: %s: use GA mode for irq %u\n", __func__,
+		 irq.vector);
+	*svm = to_svm(vcpu);
+	vcpu_info->pi_desc_addr = page_to_phys((*svm)->avic_backing_page);
+	vcpu_info->vector = irq.vector;
+
+	return 0;
+}
+
+/*
+ * svm_update_pi_irte - set IRTE for Posted-Interrupts
+ *
+ * @kvm: kvm
+ * @host_irq: host irq of the interrupt
+ * @guest_irq: gsi of the interrupt
+ * @set: set or unset PI
+ * returns 0 on success, < 0 on failure
+ */
+static int svm_update_pi_irte(struct kvm *kvm, unsigned int host_irq,
+			      uint32_t guest_irq, bool set)
+{
+	struct kvm_kernel_irq_routing_entry *e;
+	struct kvm_irq_routing_table *irq_rt;
+	int idx, ret = -EINVAL;
+
+	if (!kvm_arch_has_assigned_device(kvm) ||
+	    !irq_remapping_cap(IRQ_POSTING_CAP))
+		return 0;
+
+	pr_debug("SVM: %s: host_irq=%#x, guest_irq=%#x, set=%#x\n",
+		 __func__, host_irq, guest_irq, set);
+
+	idx = srcu_read_lock(&kvm->irq_srcu);
+	irq_rt = srcu_dereference(kvm->irq_routing, &kvm->irq_srcu);
+	WARN_ON(guest_irq >= irq_rt->nr_rt_entries);
+
+	hlist_for_each_entry(e, &irq_rt->map[guest_irq], link) {
+		struct vcpu_data vcpu_info;
+		struct vcpu_svm *svm = NULL;
+
+		if (e->type != KVM_IRQ_ROUTING_MSI)
+			continue;
+
+		/**
+		 * Here, we setup with legacy mode in the following cases:
+		 * 1. When cannot target interrupt to a specific vcpu.
+		 * 2. Unsetting posted interrupt.
+		 * 3. APIC virtialization is disabled for the vcpu.
+		 */
+		if (!get_pi_vcpu_info(kvm, e, &vcpu_info, &svm) && set &&
+		    kvm_vcpu_apicv_active(&svm->vcpu)) {
+			struct amd_iommu_pi_data pi;
+
+			/* Try to enable guest_mode in IRTE */
+			pi.base = page_to_phys(svm->avic_backing_page) & AVIC_HPA_MASK;
+			pi.ga_tag = AVIC_GATAG(kvm->arch.avic_vm_id,
+						     svm->vcpu.vcpu_id);
+			pi.is_guest_mode = true;
+			pi.vcpu_data = &vcpu_info;
+			ret = irq_set_vcpu_affinity(host_irq, &pi);
+
+			/**
+			 * Here, we successfully setting up vcpu affinity in
+			 * IOMMU guest mode. Now, we need to store the posted
+			 * interrupt information in a per-vcpu ir_list so that
+			 * we can reference to them directly when we update vcpu
+			 * scheduling information in IOMMU irte.
+			 */
+			if (!ret && pi.is_guest_mode)
+				svm_ir_list_add(svm, &pi);
+		} else {
+			/* Use legacy mode in IRTE */
+			struct amd_iommu_pi_data pi;
+
+			/**
+			 * Here, pi is used to:
+			 * - Tell IOMMU to use legacy mode for this interrupt.
+			 * - Retrieve ga_tag of prior interrupt remapping data.
+			 */
+			pi.is_guest_mode = false;
+			ret = irq_set_vcpu_affinity(host_irq, &pi);
+
+			/**
+			 * Check if the posted interrupt was previously
+			 * setup with the guest_mode by checking if the ga_tag
+			 * was cached. If so, we need to clean up the per-vcpu
+			 * ir_list.
+			 */
+			if (!ret && pi.prev_ga_tag) {
+				int id = AVIC_GATAG_TO_VCPUID(pi.prev_ga_tag);
+				struct kvm_vcpu *vcpu;
+
+				vcpu = kvm_get_vcpu_by_id(kvm, id);
+				if (vcpu)
+					svm_ir_list_del(to_svm(vcpu), &pi);
+			}
+		}
+
+		if (!ret && svm) {
+			trace_kvm_pi_irte_update(svm->vcpu.vcpu_id,
+						 host_irq, e->gsi,
+						 vcpu_info.vector,
+						 vcpu_info.pi_desc_addr, set);
+		}
+
+		if (ret < 0) {
+			pr_err("%s: failed to update PI IRTE\n", __func__);
+			goto out;
+		}
+	}
+
+	ret = 0;
+out:
+	srcu_read_unlock(&kvm->irq_srcu, idx);
+	return ret;
+}
+
 static int svm_nmi_allowed(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -4961,7 +5318,7 @@ static inline void avic_post_state_restore(struct kvm_vcpu *vcpu)
 	avic_handle_ldr_update(vcpu);
 }
 
-static struct kvm_x86_ops svm_x86_ops = {
+static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 	.cpu_has_kvm_support = has_svm,
 	.disabled_by_bios = is_disabled,
 	.hardware_setup = svm_hardware_setup,
@@ -5064,7 +5421,6 @@ static struct kvm_x86_ops svm_x86_ops = {
 
 	.has_wbinvd_exit = svm_has_wbinvd_exit,
 
-	.read_tsc_offset = svm_read_tsc_offset,
 	.write_tsc_offset = svm_write_tsc_offset,
 	.adjust_tsc_offset_guest = svm_adjust_tsc_offset_guest,
 	.read_l1_tsc = svm_read_l1_tsc,
@@ -5078,6 +5434,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 
 	.pmu_ops = &amd_pmu_ops,
 	.deliver_posted_interrupt = svm_deliver_avic_intr,
+	.update_pi_irte = svm_update_pi_irte,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 5cede40..cf1b16d 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -927,6 +927,8 @@ static unsigned long *vmx_msr_bitmap_legacy;
 static unsigned long *vmx_msr_bitmap_longmode;
 static unsigned long *vmx_msr_bitmap_legacy_x2apic;
 static unsigned long *vmx_msr_bitmap_longmode_x2apic;
+static unsigned long *vmx_msr_bitmap_legacy_x2apic_apicv_inactive;
+static unsigned long *vmx_msr_bitmap_longmode_x2apic_apicv_inactive;
 static unsigned long *vmx_vmread_bitmap;
 static unsigned long *vmx_vmwrite_bitmap;
 
@@ -939,6 +941,7 @@ static DEFINE_SPINLOCK(vmx_vpid_lock);
 static struct vmcs_config {
 	int size;
 	int order;
+	u32 basic_cap;
 	u32 revision_id;
 	u32 pin_based_exec_ctrl;
 	u32 cpu_based_exec_ctrl;
@@ -1215,6 +1218,11 @@ static inline bool cpu_has_vmx_ple(void)
 		SECONDARY_EXEC_PAUSE_LOOP_EXITING;
 }
 
+static inline bool cpu_has_vmx_basic_inout(void)
+{
+	return	(((u64)vmcs_config.basic_cap << 32) & VMX_BASIC_INOUT);
+}
+
 static inline bool cpu_need_virtualize_apic_accesses(struct kvm_vcpu *vcpu)
 {
 	return flexpriority_enabled && lapic_in_kernel(vcpu);
@@ -2518,10 +2526,17 @@ static void vmx_set_msr_bitmap(struct kvm_vcpu *vcpu)
 	else if (cpu_has_secondary_exec_ctrls() &&
 		 (vmcs_read32(SECONDARY_VM_EXEC_CONTROL) &
 		  SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE)) {
-		if (is_long_mode(vcpu))
-			msr_bitmap = vmx_msr_bitmap_longmode_x2apic;
-		else
-			msr_bitmap = vmx_msr_bitmap_legacy_x2apic;
+		if (enable_apicv && kvm_vcpu_apicv_active(vcpu)) {
+			if (is_long_mode(vcpu))
+				msr_bitmap = vmx_msr_bitmap_longmode_x2apic;
+			else
+				msr_bitmap = vmx_msr_bitmap_legacy_x2apic;
+		} else {
+			if (is_long_mode(vcpu))
+				msr_bitmap = vmx_msr_bitmap_longmode_x2apic_apicv_inactive;
+			else
+				msr_bitmap = vmx_msr_bitmap_legacy_x2apic_apicv_inactive;
+		}
 	} else {
 		if (is_long_mode(vcpu))
 			msr_bitmap = vmx_msr_bitmap_longmode;
@@ -2603,11 +2618,6 @@ static u64 vmx_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc)
 	return host_tsc + tsc_offset;
 }
 
-static u64 vmx_read_tsc_offset(struct kvm_vcpu *vcpu)
-{
-	return vmcs_read64(TSC_OFFSET);
-}
-
 /*
  * writes 'offset' into guest's timestamp counter offset register
  */
@@ -2877,6 +2887,8 @@ static int vmx_get_vmx_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 		*pdata = VMCS12_REVISION | VMX_BASIC_TRUE_CTLS |
 			   ((u64)VMCS12_SIZE << VMX_BASIC_VMCS_SIZE_SHIFT) |
 			   (VMX_BASIC_MEM_TYPE_WB << VMX_BASIC_MEM_TYPE_SHIFT);
+		if (cpu_has_vmx_basic_inout())
+			*pdata |= VMX_BASIC_INOUT;
 		break;
 	case MSR_IA32_VMX_TRUE_PINBASED_CTLS:
 	case MSR_IA32_VMX_PINBASED_CTLS:
@@ -3457,7 +3469,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 		return -EIO;
 
 	vmcs_conf->size = vmx_msr_high & 0x1fff;
-	vmcs_conf->order = get_order(vmcs_config.size);
+	vmcs_conf->order = get_order(vmcs_conf->size);
+	vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff;
 	vmcs_conf->revision_id = vmx_msr_low;
 
 	vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control;
@@ -4678,28 +4691,49 @@ static void vmx_disable_intercept_for_msr(u32 msr, bool longmode_only)
 						msr, MSR_TYPE_R | MSR_TYPE_W);
 }
 
-static void vmx_enable_intercept_msr_read_x2apic(u32 msr)
+static void vmx_enable_intercept_msr_read_x2apic(u32 msr, bool apicv_active)
 {
-	__vmx_enable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
-			msr, MSR_TYPE_R);
-	__vmx_enable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
-			msr, MSR_TYPE_R);
+	if (apicv_active) {
+		__vmx_enable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
+				msr, MSR_TYPE_R);
+		__vmx_enable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
+				msr, MSR_TYPE_R);
+	} else {
+		__vmx_enable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic_apicv_inactive,
+				msr, MSR_TYPE_R);
+		__vmx_enable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic_apicv_inactive,
+				msr, MSR_TYPE_R);
+	}
 }
 
-static void vmx_disable_intercept_msr_read_x2apic(u32 msr)
+static void vmx_disable_intercept_msr_read_x2apic(u32 msr, bool apicv_active)
 {
-	__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
-			msr, MSR_TYPE_R);
-	__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
-			msr, MSR_TYPE_R);
+	if (apicv_active) {
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
+				msr, MSR_TYPE_R);
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
+				msr, MSR_TYPE_R);
+	} else {
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic_apicv_inactive,
+				msr, MSR_TYPE_R);
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic_apicv_inactive,
+				msr, MSR_TYPE_R);
+	}
 }
 
-static void vmx_disable_intercept_msr_write_x2apic(u32 msr)
+static void vmx_disable_intercept_msr_write_x2apic(u32 msr, bool apicv_active)
 {
-	__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
-			msr, MSR_TYPE_W);
-	__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
-			msr, MSR_TYPE_W);
+	if (apicv_active) {
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic,
+				msr, MSR_TYPE_W);
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic,
+				msr, MSR_TYPE_W);
+	} else {
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_legacy_x2apic_apicv_inactive,
+				msr, MSR_TYPE_W);
+		__vmx_disable_intercept_for_msr(vmx_msr_bitmap_longmode_x2apic_apicv_inactive,
+				msr, MSR_TYPE_W);
+	}
 }
 
 static bool vmx_get_enable_apicv(void)
@@ -5279,29 +5313,30 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	if (is_guest_mode(vcpu))
-		return;
+	if (!is_guest_mode(vcpu)) {
+		if (!cpu_has_virtual_nmis()) {
+			/*
+			 * Tracking the NMI-blocked state in software is built upon
+			 * finding the next open IRQ window. This, in turn, depends on
+			 * well-behaving guests: They have to keep IRQs disabled at
+			 * least as long as the NMI handler runs. Otherwise we may
+			 * cause NMI nesting, maybe breaking the guest. But as this is
+			 * highly unlikely, we can live with the residual risk.
+			 */
+			vmx->soft_vnmi_blocked = 1;
+			vmx->vnmi_blocked_time = 0;
+		}
 
-	if (!cpu_has_virtual_nmis()) {
-		/*
-		 * Tracking the NMI-blocked state in software is built upon
-		 * finding the next open IRQ window. This, in turn, depends on
-		 * well-behaving guests: They have to keep IRQs disabled at
-		 * least as long as the NMI handler runs. Otherwise we may
-		 * cause NMI nesting, maybe breaking the guest. But as this is
-		 * highly unlikely, we can live with the residual risk.
-		 */
-		vmx->soft_vnmi_blocked = 1;
-		vmx->vnmi_blocked_time = 0;
+		++vcpu->stat.nmi_injections;
+		vmx->nmi_known_unmasked = false;
 	}
 
-	++vcpu->stat.nmi_injections;
-	vmx->nmi_known_unmasked = false;
 	if (vmx->rmode.vm86_active) {
 		if (kvm_inject_realmode_interrupt(vcpu, NMI_VECTOR, 0) != EMULATE_DONE)
 			kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
 		return;
 	}
+
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
 			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
 }
@@ -6109,7 +6144,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu)
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 
 	gla_validity = (exit_qualification >> 7) & 0x3;
-	if (gla_validity != 0x3 && gla_validity != 0x1 && gla_validity != 0) {
+	if (gla_validity == 0x2) {
 		printk(KERN_ERR "EPT: Handling EPT violation failed!\n");
 		printk(KERN_ERR "EPT: GPA: 0x%lx, GVA: 0x%lx\n",
 			(long unsigned int)vmcs_read64(GUEST_PHYSICAL_ADDRESS),
@@ -6360,22 +6395,32 @@ static __init int hardware_setup(void)
 	if (!vmx_msr_bitmap_legacy_x2apic)
 		goto out2;
 
+	vmx_msr_bitmap_legacy_x2apic_apicv_inactive =
+				(unsigned long *)__get_free_page(GFP_KERNEL);
+	if (!vmx_msr_bitmap_legacy_x2apic_apicv_inactive)
+		goto out3;
+
 	vmx_msr_bitmap_longmode = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_msr_bitmap_longmode)
-		goto out3;
+		goto out4;
 
 	vmx_msr_bitmap_longmode_x2apic =
 				(unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_msr_bitmap_longmode_x2apic)
-		goto out4;
+		goto out5;
+
+	vmx_msr_bitmap_longmode_x2apic_apicv_inactive =
+				(unsigned long *)__get_free_page(GFP_KERNEL);
+	if (!vmx_msr_bitmap_longmode_x2apic_apicv_inactive)
+		goto out6;
 
 	vmx_vmread_bitmap = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_vmread_bitmap)
-		goto out6;
+		goto out7;
 
 	vmx_vmwrite_bitmap = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_vmwrite_bitmap)
-		goto out7;
+		goto out8;
 
 	memset(vmx_vmread_bitmap, 0xff, PAGE_SIZE);
 	memset(vmx_vmwrite_bitmap, 0xff, PAGE_SIZE);
@@ -6394,7 +6439,7 @@ static __init int hardware_setup(void)
 
 	if (setup_vmcs_config(&vmcs_config) < 0) {
 		r = -EIO;
-		goto out8;
+		goto out9;
 	}
 
 	if (boot_cpu_has(X86_FEATURE_NX))
@@ -6461,20 +6506,35 @@ static __init int hardware_setup(void)
 			vmx_msr_bitmap_legacy, PAGE_SIZE);
 	memcpy(vmx_msr_bitmap_longmode_x2apic,
 			vmx_msr_bitmap_longmode, PAGE_SIZE);
+	memcpy(vmx_msr_bitmap_legacy_x2apic_apicv_inactive,
+			vmx_msr_bitmap_legacy, PAGE_SIZE);
+	memcpy(vmx_msr_bitmap_longmode_x2apic_apicv_inactive,
+			vmx_msr_bitmap_longmode, PAGE_SIZE);
 
 	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
 
+	/*
+	 * enable_apicv && kvm_vcpu_apicv_active()
+	 */
 	for (msr = 0x800; msr <= 0x8ff; msr++)
-		vmx_disable_intercept_msr_read_x2apic(msr);
+		vmx_disable_intercept_msr_read_x2apic(msr, true);
 
 	/* TMCCT */
-	vmx_enable_intercept_msr_read_x2apic(0x839);
+	vmx_enable_intercept_msr_read_x2apic(0x839, true);
 	/* TPR */
-	vmx_disable_intercept_msr_write_x2apic(0x808);
+	vmx_disable_intercept_msr_write_x2apic(0x808, true);
 	/* EOI */
-	vmx_disable_intercept_msr_write_x2apic(0x80b);
+	vmx_disable_intercept_msr_write_x2apic(0x80b, true);
 	/* SELF-IPI */
-	vmx_disable_intercept_msr_write_x2apic(0x83f);
+	vmx_disable_intercept_msr_write_x2apic(0x83f, true);
+
+	/*
+	 * (enable_apicv && !kvm_vcpu_apicv_active()) ||
+	 * 	!enable_apicv
+	 */
+	/* TPR */
+	vmx_disable_intercept_msr_read_x2apic(0x808, false);
+	vmx_disable_intercept_msr_write_x2apic(0x808, false);
 
 	if (enable_ept) {
 		kvm_mmu_set_mask_ptes(VMX_EPT_READABLE_MASK,
@@ -6521,14 +6581,18 @@ static __init int hardware_setup(void)
 
 	return alloc_kvm_area();
 
-out8:
+out9:
 	free_page((unsigned long)vmx_vmwrite_bitmap);
-out7:
+out8:
 	free_page((unsigned long)vmx_vmread_bitmap);
+out7:
+	free_page((unsigned long)vmx_msr_bitmap_longmode_x2apic_apicv_inactive);
 out6:
 	free_page((unsigned long)vmx_msr_bitmap_longmode_x2apic);
-out4:
+out5:
 	free_page((unsigned long)vmx_msr_bitmap_longmode);
+out4:
+	free_page((unsigned long)vmx_msr_bitmap_legacy_x2apic_apicv_inactive);
 out3:
 	free_page((unsigned long)vmx_msr_bitmap_legacy_x2apic);
 out2:
@@ -6544,7 +6608,9 @@ out:
 static __exit void hardware_unsetup(void)
 {
 	free_page((unsigned long)vmx_msr_bitmap_legacy_x2apic);
+	free_page((unsigned long)vmx_msr_bitmap_legacy_x2apic_apicv_inactive);
 	free_page((unsigned long)vmx_msr_bitmap_longmode_x2apic);
+	free_page((unsigned long)vmx_msr_bitmap_longmode_x2apic_apicv_inactive);
 	free_page((unsigned long)vmx_msr_bitmap_legacy);
 	free_page((unsigned long)vmx_msr_bitmap_longmode);
 	free_page((unsigned long)vmx_io_bitmap_b);
@@ -6726,7 +6792,7 @@ static void nested_vmx_abort(struct kvm_vcpu *vcpu, u32 indicator)
 {
 	/* TODO: not to reset guest simply here. */
 	kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu);
-	pr_warn("kvm: nested vmx abort, indicator %d\n", indicator);
+	pr_debug_ratelimited("kvm: nested vmx abort, indicator %d\n", indicator);
 }
 
 static enum hrtimer_restart vmx_preemption_timer_fn(struct hrtimer *timer)
@@ -7013,7 +7079,7 @@ static int handle_vmon(struct kvm_vcpu *vcpu)
 	vmx->nested.vmcs02_num = 0;
 
 	hrtimer_init(&vmx->nested.preemption_timer, CLOCK_MONOTONIC,
-		     HRTIMER_MODE_REL);
+		     HRTIMER_MODE_REL_PINNED);
 	vmx->nested.preemption_timer.function = vmx_preemption_timer_fn;
 
 	vmx->nested.vmxon = true;
@@ -8435,12 +8501,7 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
 		return;
 	}
 
-	/*
-	 * There is not point to enable virtualize x2apic without enable
-	 * apicv
-	 */
-	if (!cpu_has_vmx_virtualize_x2apic_mode() ||
-				!kvm_vcpu_apicv_active(vcpu))
+	if (!cpu_has_vmx_virtualize_x2apic_mode())
 		return;
 
 	if (!cpu_need_tpr_shadow(vcpu))
@@ -9598,7 +9659,7 @@ static int nested_vmx_check_msr_switch(struct kvm_vcpu *vcpu,
 	maxphyaddr = cpuid_maxphyaddr(vcpu);
 	if (!IS_ALIGNED(addr, 16) || addr >> maxphyaddr ||
 	    (addr + count * sizeof(struct vmx_msr_entry) - 1) >> maxphyaddr) {
-		pr_warn_ratelimited(
+		pr_debug_ratelimited(
 			"nVMX: invalid MSR switch (0x%lx, %d, %llu, 0x%08llx)",
 			addr_field, maxphyaddr, count, addr);
 		return -EINVAL;
@@ -9671,13 +9732,13 @@ static u32 nested_vmx_load_msr(struct kvm_vcpu *vcpu, u64 gpa, u32 count)
 	for (i = 0; i < count; i++) {
 		if (kvm_vcpu_read_guest(vcpu, gpa + i * sizeof(e),
 					&e, sizeof(e))) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s cannot read MSR entry (%u, 0x%08llx)\n",
 				__func__, i, gpa + i * sizeof(e));
 			goto fail;
 		}
 		if (nested_vmx_load_msr_check(vcpu, &e)) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s check failed (%u, 0x%x, 0x%x)\n",
 				__func__, i, e.index, e.reserved);
 			goto fail;
@@ -9685,7 +9746,7 @@ static u32 nested_vmx_load_msr(struct kvm_vcpu *vcpu, u64 gpa, u32 count)
 		msr.index = e.index;
 		msr.data = e.value;
 		if (kvm_set_msr(vcpu, &msr)) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s cannot write MSR (%u, 0x%x, 0x%llx)\n",
 				__func__, i, e.index, e.value);
 			goto fail;
@@ -9706,13 +9767,13 @@ static int nested_vmx_store_msr(struct kvm_vcpu *vcpu, u64 gpa, u32 count)
 		if (kvm_vcpu_read_guest(vcpu,
 					gpa + i * sizeof(e),
 					&e, 2 * sizeof(u32))) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s cannot read MSR entry (%u, 0x%08llx)\n",
 				__func__, i, gpa + i * sizeof(e));
 			return -EINVAL;
 		}
 		if (nested_vmx_store_msr_check(vcpu, &e)) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s check failed (%u, 0x%x, 0x%x)\n",
 				__func__, i, e.index, e.reserved);
 			return -EINVAL;
@@ -9720,7 +9781,7 @@ static int nested_vmx_store_msr(struct kvm_vcpu *vcpu, u64 gpa, u32 count)
 		msr_info.host_initiated = false;
 		msr_info.index = e.index;
 		if (kvm_get_msr(vcpu, &msr_info)) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s cannot read MSR (%u, 0x%x)\n",
 				__func__, i, e.index);
 			return -EINVAL;
@@ -9729,7 +9790,7 @@ static int nested_vmx_store_msr(struct kvm_vcpu *vcpu, u64 gpa, u32 count)
 					 gpa + i * sizeof(e) +
 					     offsetof(struct vmx_msr_entry, value),
 					 &msr_info.data, sizeof(msr_info.data))) {
-			pr_warn_ratelimited(
+			pr_debug_ratelimited(
 				"%s cannot write MSR (%u, 0x%x, 0x%llx)\n",
 				__func__, i, e.index, msr_info.data);
 			return -EINVAL;
@@ -10500,6 +10561,9 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 		vmcs12->guest_pdptr3 = vmcs_read64(GUEST_PDPTR3);
 	}
 
+	if (nested_cpu_has_ept(vmcs12))
+		vmcs12->guest_linear_address = vmcs_readl(GUEST_LINEAR_ADDRESS);
+
 	if (nested_cpu_has_vid(vmcs12))
 		vmcs12->guest_intr_status = vmcs_read16(GUEST_INTR_STATUS);
 
@@ -10793,7 +10857,7 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 	 * We are now running in L2, mmu_notifier will force to reload the
 	 * page's hpa for L2 vmcs. Need to reload it for L1 before entering L1.
 	 */
-	kvm_vcpu_reload_apic_access_page(vcpu);
+	kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
 
 	/*
 	 * Exiting from L2 to L1, we're now back to L1 which thinks it just
@@ -11177,7 +11241,7 @@ static void vmx_setup_mce(struct kvm_vcpu *vcpu)
 			~FEATURE_CONTROL_LMCE;
 }
 
-static struct kvm_x86_ops vmx_x86_ops = {
+static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
 	.cpu_has_kvm_support = cpu_has_kvm_support,
 	.disabled_by_bios = vmx_disabled_by_bios,
 	.hardware_setup = hardware_setup,
@@ -11274,7 +11338,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
 
 	.has_wbinvd_exit = cpu_has_vmx_wbinvd_exit,
 
-	.read_tsc_offset = vmx_read_tsc_offset,
 	.write_tsc_offset = vmx_write_tsc_offset,
 	.adjust_tsc_offset_guest = vmx_adjust_tsc_offset_guest,
 	.read_l1_tsc = vmx_read_l1_tsc,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 19f9f9e..6c633de 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1367,7 +1367,7 @@ static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu)
 
 static void update_ia32_tsc_adjust_msr(struct kvm_vcpu *vcpu, s64 offset)
 {
-	u64 curr_offset = kvm_x86_ops->read_tsc_offset(vcpu);
+	u64 curr_offset = vcpu->arch.tsc_offset;
 	vcpu->arch.ia32_tsc_adjust_msr += offset - curr_offset;
 }
 
@@ -1413,6 +1413,12 @@ u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc)
 }
 EXPORT_SYMBOL_GPL(kvm_read_l1_tsc);
 
+static void kvm_vcpu_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
+{
+	kvm_x86_ops->write_tsc_offset(vcpu, offset);
+	vcpu->arch.tsc_offset = offset;
+}
+
 void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 {
 	struct kvm *kvm = vcpu->kvm;
@@ -1425,7 +1431,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
 	offset = kvm_compute_tsc_offset(vcpu, data);
-	ns = get_kernel_ns();
+	ns = ktime_get_boot_ns();
 	elapsed = ns - kvm->arch.last_tsc_nsec;
 
 	if (vcpu->arch.virtual_tsc_khz) {
@@ -1522,7 +1528,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 
 	if (guest_cpuid_has_tsc_adjust(vcpu) && !msr->host_initiated)
 		update_ia32_tsc_adjust_msr(vcpu, offset);
-	kvm_x86_ops->write_tsc_offset(vcpu, offset);
+	kvm_vcpu_write_tsc_offset(vcpu, offset);
 	raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);
 
 	spin_lock(&kvm->arch.pvclock_gtod_sync_lock);
@@ -1716,6 +1722,88 @@ static void kvm_gen_update_masterclock(struct kvm *kvm)
 #endif
 }
 
+static u64 __get_kvmclock_ns(struct kvm *kvm)
+{
+	struct kvm_vcpu *vcpu = kvm_get_vcpu(kvm, 0);
+	struct kvm_arch *ka = &kvm->arch;
+	s64 ns;
+
+	if (vcpu->arch.hv_clock.flags & PVCLOCK_TSC_STABLE_BIT) {
+		u64 tsc = kvm_read_l1_tsc(vcpu, rdtsc());
+		ns = __pvclock_read_cycles(&vcpu->arch.hv_clock, tsc);
+	} else {
+		ns = ktime_get_boot_ns() + ka->kvmclock_offset;
+	}
+
+	return ns;
+}
+
+u64 get_kvmclock_ns(struct kvm *kvm)
+{
+	unsigned long flags;
+	s64 ns;
+
+	local_irq_save(flags);
+	ns = __get_kvmclock_ns(kvm);
+	local_irq_restore(flags);
+
+	return ns;
+}
+
+static void kvm_setup_pvclock_page(struct kvm_vcpu *v)
+{
+	struct kvm_vcpu_arch *vcpu = &v->arch;
+	struct pvclock_vcpu_time_info guest_hv_clock;
+
+	if (unlikely(kvm_read_guest_cached(v->kvm, &vcpu->pv_time,
+		&guest_hv_clock, sizeof(guest_hv_clock))))
+		return;
+
+	/* This VCPU is paused, but it's legal for a guest to read another
+	 * VCPU's kvmclock, so we really have to follow the specification where
+	 * it says that version is odd if data is being modified, and even after
+	 * it is consistent.
+	 *
+	 * Version field updates must be kept separate.  This is because
+	 * kvm_write_guest_cached might use a "rep movs" instruction, and
+	 * writes within a string instruction are weakly ordered.  So there
+	 * are three writes overall.
+	 *
+	 * As a small optimization, only write the version field in the first
+	 * and third write.  The vcpu->pv_time cache is still valid, because the
+	 * version field is the first in the struct.
+	 */
+	BUILD_BUG_ON(offsetof(struct pvclock_vcpu_time_info, version) != 0);
+
+	vcpu->hv_clock.version = guest_hv_clock.version + 1;
+	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+				&vcpu->hv_clock,
+				sizeof(vcpu->hv_clock.version));
+
+	smp_wmb();
+
+	/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
+	vcpu->hv_clock.flags |= (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
+
+	if (vcpu->pvclock_set_guest_stopped_request) {
+		vcpu->hv_clock.flags |= PVCLOCK_GUEST_STOPPED;
+		vcpu->pvclock_set_guest_stopped_request = false;
+	}
+
+	trace_kvm_pvclock_update(v->vcpu_id, &vcpu->hv_clock);
+
+	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+				&vcpu->hv_clock,
+				sizeof(vcpu->hv_clock));
+
+	smp_wmb();
+
+	vcpu->hv_clock.version++;
+	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
+				&vcpu->hv_clock,
+				sizeof(vcpu->hv_clock.version));
+}
+
 static int kvm_guest_time_update(struct kvm_vcpu *v)
 {
 	unsigned long flags, tgt_tsc_khz;
@@ -1723,7 +1811,6 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	struct kvm_arch *ka = &v->kvm->arch;
 	s64 kernel_ns;
 	u64 tsc_timestamp, host_tsc;
-	struct pvclock_vcpu_time_info guest_hv_clock;
 	u8 pvclock_flags;
 	bool use_master_clock;
 
@@ -1752,7 +1839,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	}
 	if (!use_master_clock) {
 		host_tsc = rdtsc();
-		kernel_ns = get_kernel_ns();
+		kernel_ns = ktime_get_boot_ns();
 	}
 
 	tsc_timestamp = kvm_read_l1_tsc(v, host_tsc);
@@ -1777,8 +1864,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 
 	local_irq_restore(flags);
 
-	if (!vcpu->pv_time_enabled)
-		return 0;
+	/* With all the info we got, fill in the values */
 
 	if (kvm_has_tsc_control)
 		tgt_tsc_khz = kvm_scale_tsc(v, tgt_tsc_khz);
@@ -1790,64 +1876,21 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 		vcpu->hw_tsc_khz = tgt_tsc_khz;
 	}
 
-	/* With all the info we got, fill in the values */
 	vcpu->hv_clock.tsc_timestamp = tsc_timestamp;
 	vcpu->hv_clock.system_time = kernel_ns + v->kvm->arch.kvmclock_offset;
 	vcpu->last_guest_tsc = tsc_timestamp;
 
-	if (unlikely(kvm_read_guest_cached(v->kvm, &vcpu->pv_time,
-		&guest_hv_clock, sizeof(guest_hv_clock))))
-		return 0;
-
-	/* This VCPU is paused, but it's legal for a guest to read another
-	 * VCPU's kvmclock, so we really have to follow the specification where
-	 * it says that version is odd if data is being modified, and even after
-	 * it is consistent.
-	 *
-	 * Version field updates must be kept separate.  This is because
-	 * kvm_write_guest_cached might use a "rep movs" instruction, and
-	 * writes within a string instruction are weakly ordered.  So there
-	 * are three writes overall.
-	 *
-	 * As a small optimization, only write the version field in the first
-	 * and third write.  The vcpu->pv_time cache is still valid, because the
-	 * version field is the first in the struct.
-	 */
-	BUILD_BUG_ON(offsetof(struct pvclock_vcpu_time_info, version) != 0);
-
-	vcpu->hv_clock.version = guest_hv_clock.version + 1;
-	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
-				&vcpu->hv_clock,
-				sizeof(vcpu->hv_clock.version));
-
-	smp_wmb();
-
-	/* retain PVCLOCK_GUEST_STOPPED if set in guest copy */
-	pvclock_flags = (guest_hv_clock.flags & PVCLOCK_GUEST_STOPPED);
-
-	if (vcpu->pvclock_set_guest_stopped_request) {
-		pvclock_flags |= PVCLOCK_GUEST_STOPPED;
-		vcpu->pvclock_set_guest_stopped_request = false;
-	}
-
 	/* If the host uses TSC clocksource, then it is stable */
+	pvclock_flags = 0;
 	if (use_master_clock)
 		pvclock_flags |= PVCLOCK_TSC_STABLE_BIT;
 
 	vcpu->hv_clock.flags = pvclock_flags;
 
-	trace_kvm_pvclock_update(v->vcpu_id, &vcpu->hv_clock);
-
-	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
-				&vcpu->hv_clock,
-				sizeof(vcpu->hv_clock));
-
-	smp_wmb();
-
-	vcpu->hv_clock.version++;
-	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
-				&vcpu->hv_clock,
-				sizeof(vcpu->hv_clock.version));
+	if (vcpu->pv_time_enabled)
+		kvm_setup_pvclock_page(v);
+	if (v == kvm_get_vcpu(v->kvm, 0))
+		kvm_hv_setup_tsc_page(v->kvm, &vcpu->hv_clock);
 	return 0;
 }
 
@@ -2743,16 +2786,16 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		if (tsc_delta < 0)
 			mark_tsc_unstable("KVM discovered backwards TSC");
 
-		if (kvm_lapic_hv_timer_in_use(vcpu) &&
-				kvm_x86_ops->set_hv_timer(vcpu,
-					kvm_get_lapic_tscdeadline_msr(vcpu)))
-			kvm_lapic_switch_to_sw_timer(vcpu);
 		if (check_tsc_unstable()) {
 			u64 offset = kvm_compute_tsc_offset(vcpu,
 						vcpu->arch.last_guest_tsc);
-			kvm_x86_ops->write_tsc_offset(vcpu, offset);
+			kvm_vcpu_write_tsc_offset(vcpu, offset);
 			vcpu->arch.tsc_catchup = 1;
 		}
+		if (kvm_lapic_hv_timer_in_use(vcpu) &&
+				kvm_x86_ops->set_hv_timer(vcpu,
+					kvm_get_lapic_tscdeadline_msr(vcpu)))
+			kvm_lapic_switch_to_sw_timer(vcpu);
 		/*
 		 * On a host with synchronized TSC, there is no need to update
 		 * kvmclock on vcpu->cpu migration
@@ -4039,7 +4082,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	case KVM_SET_CLOCK: {
 		struct kvm_clock_data user_ns;
 		u64 now_ns;
-		s64 delta;
 
 		r = -EFAULT;
 		if (copy_from_user(&user_ns, argp, sizeof(user_ns)))
@@ -4051,10 +4093,9 @@ long kvm_arch_vm_ioctl(struct file *filp,
 
 		r = 0;
 		local_irq_disable();
-		now_ns = get_kernel_ns();
-		delta = user_ns.clock - now_ns;
+		now_ns = __get_kvmclock_ns(kvm);
+		kvm->arch.kvmclock_offset += user_ns.clock - now_ns;
 		local_irq_enable();
-		kvm->arch.kvmclock_offset = delta;
 		kvm_gen_update_masterclock(kvm);
 		break;
 	}
@@ -4062,10 +4103,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		struct kvm_clock_data user_ns;
 		u64 now_ns;
 
-		local_irq_disable();
-		now_ns = get_kernel_ns();
-		user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
-		local_irq_enable();
+		now_ns = get_kvmclock_ns(kvm);
+		user_ns.clock = now_ns;
 		user_ns.flags = 0;
 		memset(&user_ns.pad, 0, sizeof(user_ns.pad));
 
@@ -6700,7 +6739,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 
 	kvm_put_guest_xcr0(vcpu);
 
-	/* Interrupt is enabled by handle_external_intr() */
 	kvm_x86_ops->handle_external_intr(vcpu);
 
 	++vcpu->stat.exits;
@@ -7530,7 +7568,7 @@ int kvm_arch_hardware_enable(void)
 	 * before any KVM threads can be running.  Unfortunately, we can't
 	 * bring the TSCs fully up to date with real time, as we aren't yet far
 	 * enough into CPU bringup that we know how much real time has actually
-	 * elapsed; our helper function, get_kernel_ns() will be using boot
+	 * elapsed; our helper function, ktime_get_boot_ns() will be using boot
 	 * variables that haven't been updated yet.
 	 *
 	 * So we simply find the maximum observed TSC above, then record the
@@ -7765,6 +7803,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	mutex_init(&kvm->arch.apic_map_lock);
 	spin_lock_init(&kvm->arch.pvclock_gtod_sync_lock);
 
+	kvm->arch.kvmclock_offset = -ktime_get_boot_ns();
 	pvclock_update_vm_gtod_copy(kvm);
 
 	INIT_DELAYED_WORK(&kvm->arch.kvmclock_update_work, kvmclock_update_fn);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index a82ca46..e8ff3e4 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -148,11 +148,6 @@ static inline void kvm_register_writel(struct kvm_vcpu *vcpu,
 	return kvm_register_write(vcpu, reg, val);
 }
 
-static inline u64 get_kernel_ns(void)
-{
-	return ktime_get_boot_ns();
-}
-
 static inline bool kvm_check_has_quirk(struct kvm *kvm, u64 quirk)
 {
 	return !(kvm->arch.disabled_quirks & quirk);
@@ -164,6 +159,7 @@ void kvm_set_pending_timer(struct kvm_vcpu *vcpu);
 int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq, int inc_eip);
 
 void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr);
+u64 get_kvmclock_ns(struct kvm *kvm);
 
 int kvm_read_guest_virt(struct x86_emulate_ctxt *ctxt,
 	gva_t addr, void *val, unsigned int bytes,
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 2ec0b0abb..49e6eba 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -181,11 +181,11 @@ ENDPROC(memcpy_orig)
 
 #ifndef CONFIG_UML
 /*
- * memcpy_mcsafe - memory copy with machine check exception handling
+ * memcpy_mcsafe_unrolled - memory copy with machine check exception handling
  * Note that we only catch machine checks when reading the source addresses.
  * Writes to target are posted and don't generate machine checks.
  */
-ENTRY(memcpy_mcsafe)
+ENTRY(memcpy_mcsafe_unrolled)
 	cmpl $8, %edx
 	/* Less than 8 bytes? Go to byte copy loop */
 	jb .L_no_whole_words
@@ -273,7 +273,7 @@ ENTRY(memcpy_mcsafe)
 .L_done_memcpy_trap:
 	xorq %rax, %rax
 	ret
-ENDPROC(memcpy_mcsafe)
+ENDPROC(memcpy_mcsafe_unrolled)
 
 	.section .fixup, "ax"
 	/* Return -EFAULT for any failure */
diff --git a/arch/x86/mm/amdtopology.c b/arch/x86/mm/amdtopology.c
index ba47524..d1c7de0 100644
--- a/arch/x86/mm/amdtopology.c
+++ b/arch/x86/mm/amdtopology.c
@@ -52,21 +52,6 @@ static __init int find_northbridge(void)
 	return -ENOENT;
 }
 
-static __init void early_get_boot_cpu_id(void)
-{
-	/*
-	 * need to get the APIC ID of the BSP so can use that to
-	 * create apicid_to_node in amd_scan_nodes()
-	 */
-#ifdef CONFIG_X86_MPPARSE
-	/*
-	 * get boot-time SMP configuration:
-	 */
-	if (smp_found_config)
-		early_get_smp_config();
-#endif
-}
-
 int __init amd_numa_init(void)
 {
 	u64 start = PFN_PHYS(0);
@@ -180,8 +165,11 @@ int __init amd_numa_init(void)
 	cores = 1 << bits;
 	apicid_base = 0;
 
-	/* get the APIC ID of the BSP early for systems with apicid lifting */
-	early_get_boot_cpu_id();
+	/*
+	 * get boot-time SMP configuration:
+	 */
+	early_get_smp_config();
+
 	if (boot_cpu_physical_apicid > 0) {
 		pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid);
 		apicid_base = boot_cpu_physical_apicid;
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index 832b98f..79ae939 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -1,4 +1,4 @@
-#include <linux/module.h>
+#include <linux/extable.h>
 #include <asm/uaccess.h>
 #include <asm/traps.h>
 #include <asm/kdebug.h>
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index dc80230..9f72ca3 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -5,7 +5,7 @@
  */
 #include <linux/sched.h>		/* test_thread_flag(), ...	*/
 #include <linux/kdebug.h>		/* oops_begin/end, ...		*/
-#include <linux/module.h>		/* search_exception_table	*/
+#include <linux/extable.h>		/* search_exception_tables	*/
 #include <linux/bootmem.h>		/* max_low_pfn			*/
 #include <linux/kprobes.h>		/* NOKPROBE_SYMBOL, ...		*/
 #include <linux/mmiotrace.h>		/* kmmio_handler, ...		*/
@@ -753,6 +753,38 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 		return;
 	}
 
+#ifdef CONFIG_VMAP_STACK
+	/*
+	 * Stack overflow?  During boot, we can fault near the initial
+	 * stack in the direct map, but that's not an overflow -- check
+	 * that we're in vmalloc space to avoid this.
+	 */
+	if (is_vmalloc_addr((void *)address) &&
+	    (((unsigned long)tsk->stack - 1 - address < PAGE_SIZE) ||
+	     address - ((unsigned long)tsk->stack + THREAD_SIZE) < PAGE_SIZE)) {
+		register void *__sp asm("rsp");
+		unsigned long stack = this_cpu_read(orig_ist.ist[DOUBLEFAULT_STACK]) - sizeof(void *);
+		/*
+		 * We're likely to be running with very little stack space
+		 * left.  It's plausible that we'd hit this condition but
+		 * double-fault even before we get this far, in which case
+		 * we're fine: the double-fault handler will deal with it.
+		 *
+		 * We don't want to make it all the way into the oops code
+		 * and then double-fault, though, because we're likely to
+		 * break the console driver and lose most of the stack dump.
+		 */
+		asm volatile ("movq %[stack], %%rsp\n\t"
+			      "call handle_stack_overflow\n\t"
+			      "1: jmp 1b"
+			      : "+r" (__sp)
+			      : "D" ("kernel stack overflow (page fault)"),
+				"S" (regs), "d" (address),
+				[stack] "rm" (stack));
+		unreachable();
+	}
+#endif
+
 	/*
 	 * 32-bit:
 	 *
@@ -1112,6 +1144,15 @@ access_error(unsigned long error_code, struct vm_area_struct *vma)
 {
 	/* This is only called for the current mm, so: */
 	bool foreign = false;
+
+	/*
+	 * Read or write was blocked by protection keys.  This is
+	 * always an unconditional error and can never result in
+	 * a follow-up action to resolve the fault, like a COW.
+	 */
+	if (error_code & PF_PK)
+		return 1;
+
 	/*
 	 * Make sure to check the VMA so that we do not perform
 	 * faults just to hit a PF_PK as soon as we fill in a
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index d28a2d7..22af912 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -699,8 +699,10 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	}
 }
 
-void free_initmem(void)
+void __ref free_initmem(void)
 {
+	e820_reallocate_tables();
+
 	free_init_pages("unused kernel",
 			(unsigned long)(&__init_begin),
 			(unsigned long)(&__init_end));
diff --git a/arch/x86/mm/kaslr.c b/arch/x86/mm/kaslr.c
index bda8d5e..ddd2661 100644
--- a/arch/x86/mm/kaslr.c
+++ b/arch/x86/mm/kaslr.c
@@ -40,17 +40,26 @@
  * You need to add an if/def entry if you introduce a new memory region
  * compatible with KASLR. Your entry must be in logical order with memory
  * layout. For example, ESPFIX is before EFI because its virtual address is
- * before. You also need to add a BUILD_BUG_ON in kernel_randomize_memory to
+ * before. You also need to add a BUILD_BUG_ON() in kernel_randomize_memory() to
  * ensure that this order is correct and won't be changed.
  */
 static const unsigned long vaddr_start = __PAGE_OFFSET_BASE;
-static const unsigned long vaddr_end = VMEMMAP_START;
+
+#if defined(CONFIG_X86_ESPFIX64)
+static const unsigned long vaddr_end = ESPFIX_BASE_ADDR;
+#elif defined(CONFIG_EFI)
+static const unsigned long vaddr_end = EFI_VA_START;
+#else
+static const unsigned long vaddr_end = __START_KERNEL_map;
+#endif
 
 /* Default values */
 unsigned long page_offset_base = __PAGE_OFFSET_BASE;
 EXPORT_SYMBOL(page_offset_base);
 unsigned long vmalloc_base = __VMALLOC_BASE;
 EXPORT_SYMBOL(vmalloc_base);
+unsigned long vmemmap_base = __VMEMMAP_BASE;
+EXPORT_SYMBOL(vmemmap_base);
 
 /*
  * Memory regions randomized by KASLR (except modules that use a separate logic
@@ -63,6 +72,7 @@ static __initdata struct kaslr_memory_region {
 } kaslr_regions[] = {
 	{ &page_offset_base, 64/* Maximum */ },
 	{ &vmalloc_base, VMALLOC_SIZE_TB },
+	{ &vmemmap_base, 1 },
 };
 
 /* Get size in bytes used by the memory region */
@@ -89,6 +99,18 @@ void __init kernel_randomize_memory(void)
 	struct rnd_state rand_state;
 	unsigned long remain_entropy;
 
+	/*
+	 * All these BUILD_BUG_ON checks ensures the memory layout is
+	 * consistent with the vaddr_start/vaddr_end variables.
+	 */
+	BUILD_BUG_ON(vaddr_start >= vaddr_end);
+	BUILD_BUG_ON(config_enabled(CONFIG_X86_ESPFIX64) &&
+		     vaddr_end >= EFI_VA_START);
+	BUILD_BUG_ON((config_enabled(CONFIG_X86_ESPFIX64) ||
+		      config_enabled(CONFIG_EFI)) &&
+		     vaddr_end >= __START_KERNEL_map);
+	BUILD_BUG_ON(vaddr_end > __START_KERNEL_map);
+
 	if (!kaslr_memory_enabled())
 		return;
 
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index fb68210..3f35b48 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -722,22 +722,19 @@ void __init x86_numa_init(void)
 	numa_init(dummy_numa_init);
 }
 
-static __init int find_near_online_node(int node)
+static void __init init_memory_less_node(int nid)
 {
-	int n, val;
-	int min_val = INT_MAX;
-	int best_node = -1;
+	unsigned long zones_size[MAX_NR_ZONES] = {0};
+	unsigned long zholes_size[MAX_NR_ZONES] = {0};
 
-	for_each_online_node(n) {
-		val = node_distance(node, n);
+	/* Allocate and initialize node data. Memory-less node is now online.*/
+	alloc_node_data(nid);
+	free_area_init_node(nid, zones_size, 0, zholes_size);
 
-		if (val < min_val) {
-			min_val = val;
-			best_node = n;
-		}
-	}
-
-	return best_node;
+	/*
+	 * All zonelists will be built later in start_kernel() after per cpu
+	 * areas are initialized.
+	 */
 }
 
 /*
@@ -766,8 +763,10 @@ void __init init_cpu_to_node(void)
 
 		if (node == NUMA_NO_NODE)
 			continue;
+
 		if (!node_online(node))
-			node = find_near_online_node(node);
+			init_memory_less_node(node);
+
 		numa_set_node(cpu, node);
 	}
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 849dc09..e3353c9 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -917,11 +917,11 @@ static void populate_pte(struct cpa_data *cpa,
 	}
 }
 
-static int populate_pmd(struct cpa_data *cpa,
-			unsigned long start, unsigned long end,
-			unsigned num_pages, pud_t *pud, pgprot_t pgprot)
+static long populate_pmd(struct cpa_data *cpa,
+			 unsigned long start, unsigned long end,
+			 unsigned num_pages, pud_t *pud, pgprot_t pgprot)
 {
-	unsigned int cur_pages = 0;
+	long cur_pages = 0;
 	pmd_t *pmd;
 	pgprot_t pmd_pgprot;
 
@@ -991,12 +991,12 @@ static int populate_pmd(struct cpa_data *cpa,
 	return num_pages;
 }
 
-static int populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
-			pgprot_t pgprot)
+static long populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
+			 pgprot_t pgprot)
 {
 	pud_t *pud;
 	unsigned long end;
-	int cur_pages = 0;
+	long cur_pages = 0;
 	pgprot_t pud_pgprot;
 
 	end = start + (cpa->numpages << PAGE_SHIFT);
@@ -1052,7 +1052,7 @@ static int populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
 
 	/* Map trailing leftover */
 	if (start < end) {
-		int tmp;
+		long tmp;
 
 		pud = pud_offset(pgd, start);
 		if (pud_none(*pud))
@@ -1078,7 +1078,7 @@ static int populate_pgd(struct cpa_data *cpa, unsigned long addr)
 	pgprot_t pgprot = __pgprot(_KERNPG_TABLE);
 	pud_t *pud = NULL;	/* shut up gcc */
 	pgd_t *pgd_entry;
-	int ret;
+	long ret;
 
 	pgd_entry = cpa->pgd + pgd_index(addr);
 
@@ -1327,7 +1327,8 @@ static int cpa_process_alias(struct cpa_data *cpa)
 
 static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 {
-	int ret, numpages = cpa->numpages;
+	unsigned long numpages = cpa->numpages;
+	int ret;
 
 	while (numpages) {
 		/*
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index ecb1b69..170cc4f 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -927,9 +927,10 @@ int track_pfn_copy(struct vm_area_struct *vma)
 }
 
 /*
- * prot is passed in as a parameter for the new mapping. If the vma has a
- * linear pfn mapping for the entire range reserve the entire vma range with
- * single reserve_pfn_range call.
+ * prot is passed in as a parameter for the new mapping. If the vma has
+ * a linear pfn mapping for the entire range, or no vma is provided,
+ * reserve the entire pfn + size range with single reserve_pfn_range
+ * call.
  */
 int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
 		    unsigned long pfn, unsigned long addr, unsigned long size)
@@ -938,11 +939,12 @@ int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
 	enum page_cache_mode pcm;
 
 	/* reserve the whole chunk starting from paddr */
-	if (addr == vma->vm_start && size == (vma->vm_end - vma->vm_start)) {
+	if (!vma || (addr == vma->vm_start
+				&& size == (vma->vm_end - vma->vm_start))) {
 		int ret;
 
 		ret = reserve_pfn_range(paddr, size, prot, 0);
-		if (!ret)
+		if (ret == 0 && vma)
 			vma->vm_flags |= VM_PAT;
 		return ret;
 	}
@@ -997,7 +999,7 @@ void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
 	resource_size_t paddr;
 	unsigned long prot;
 
-	if (!(vma->vm_flags & VM_PAT))
+	if (vma && !(vma->vm_flags & VM_PAT))
 		return;
 
 	/* free the chunk starting from pfn or the whole chunk */
@@ -1011,7 +1013,8 @@ void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
 		size = vma->vm_end - vma->vm_start;
 	}
 	free_pfn_range(paddr, size);
-	vma->vm_flags &= ~VM_PAT;
+	if (vma)
+		vma->vm_flags &= ~VM_PAT;
 }
 
 /*
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index de391b7..159b52c 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -254,9 +254,7 @@ struct memtype *rbt_memtype_erase(u64 start, u64 end)
 
 struct memtype *rbt_memtype_lookup(u64 addr)
 {
-	struct memtype *data;
-	data = memtype_rb_lowest_match(&memtype_rbroot, addr, addr + PAGE_SIZE);
-	return data;
+	return memtype_rb_lowest_match(&memtype_rbroot, addr, addr + PAGE_SIZE);
 }
 
 #if defined(CONFIG_DEBUG_FS)
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
index e8c4744..f88ce0e 100644
--- a/arch/x86/mm/pkeys.c
+++ b/arch/x86/mm/pkeys.c
@@ -11,6 +11,7 @@
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  */
+#include <linux/debugfs.h>		/* debugfs_create_u32()		*/
 #include <linux/mm_types.h>             /* mm_struct, vma, etc...       */
 #include <linux/pkeys.h>                /* PKEY_*                       */
 #include <uapi/asm-generic/mman-common.h>
@@ -21,8 +22,19 @@
 
 int __execute_only_pkey(struct mm_struct *mm)
 {
+	bool need_to_set_mm_pkey = false;
+	int execute_only_pkey = mm->context.execute_only_pkey;
 	int ret;
 
+	/* Do we need to assign a pkey for mm's execute-only maps? */
+	if (execute_only_pkey == -1) {
+		/* Go allocate one to use, which might fail */
+		execute_only_pkey = mm_pkey_alloc(mm);
+		if (execute_only_pkey < 0)
+			return -1;
+		need_to_set_mm_pkey = true;
+	}
+
 	/*
 	 * We do not want to go through the relatively costly
 	 * dance to set PKRU if we do not need to.  Check it
@@ -32,22 +44,33 @@ int __execute_only_pkey(struct mm_struct *mm)
 	 * can make fpregs inactive.
 	 */
 	preempt_disable();
-	if (fpregs_active() &&
-	    !__pkru_allows_read(read_pkru(), PKEY_DEDICATED_EXECUTE_ONLY)) {
+	if (!need_to_set_mm_pkey &&
+	    fpregs_active() &&
+	    !__pkru_allows_read(read_pkru(), execute_only_pkey)) {
 		preempt_enable();
-		return PKEY_DEDICATED_EXECUTE_ONLY;
+		return execute_only_pkey;
 	}
 	preempt_enable();
-	ret = arch_set_user_pkey_access(current, PKEY_DEDICATED_EXECUTE_ONLY,
+
+	/*
+	 * Set up PKRU so that it denies access for everything
+	 * other than execution.
+	 */
+	ret = arch_set_user_pkey_access(current, execute_only_pkey,
 			PKEY_DISABLE_ACCESS);
 	/*
 	 * If the PKRU-set operation failed somehow, just return
 	 * 0 and effectively disable execute-only support.
 	 */
-	if (ret)
-		return 0;
+	if (ret) {
+		mm_set_pkey_free(mm, execute_only_pkey);
+		return -1;
+	}
 
-	return PKEY_DEDICATED_EXECUTE_ONLY;
+	/* We got one, store it and use it from here on out */
+	if (need_to_set_mm_pkey)
+		mm->context.execute_only_pkey = execute_only_pkey;
+	return execute_only_pkey;
 }
 
 static inline bool vma_is_pkey_exec_only(struct vm_area_struct *vma)
@@ -55,7 +78,7 @@ static inline bool vma_is_pkey_exec_only(struct vm_area_struct *vma)
 	/* Do this check first since the vm_flags should be hot */
 	if ((vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)) != VM_EXEC)
 		return false;
-	if (vma_pkey(vma) != PKEY_DEDICATED_EXECUTE_ONLY)
+	if (vma_pkey(vma) != vma->vm_mm->context.execute_only_pkey)
 		return false;
 
 	return true;
@@ -99,3 +122,106 @@ int __arch_override_mprotect_pkey(struct vm_area_struct *vma, int prot, int pkey
 	 */
 	return vma_pkey(vma);
 }
+
+#define PKRU_AD_KEY(pkey)	(PKRU_AD_BIT << ((pkey) * PKRU_BITS_PER_PKEY))
+
+/*
+ * Make the default PKRU value (at execve() time) as restrictive
+ * as possible.  This ensures that any threads clone()'d early
+ * in the process's lifetime will not accidentally get access
+ * to data which is pkey-protected later on.
+ */
+u32 init_pkru_value = PKRU_AD_KEY( 1) | PKRU_AD_KEY( 2) | PKRU_AD_KEY( 3) |
+		      PKRU_AD_KEY( 4) | PKRU_AD_KEY( 5) | PKRU_AD_KEY( 6) |
+		      PKRU_AD_KEY( 7) | PKRU_AD_KEY( 8) | PKRU_AD_KEY( 9) |
+		      PKRU_AD_KEY(10) | PKRU_AD_KEY(11) | PKRU_AD_KEY(12) |
+		      PKRU_AD_KEY(13) | PKRU_AD_KEY(14) | PKRU_AD_KEY(15);
+
+/*
+ * Called from the FPU code when creating a fresh set of FPU
+ * registers.  This is called from a very specific context where
+ * we know the FPU regstiers are safe for use and we can use PKRU
+ * directly.  The fact that PKRU is only available when we are
+ * using eagerfpu mode makes this possible.
+ */
+void copy_init_pkru_to_fpregs(void)
+{
+	u32 init_pkru_value_snapshot = READ_ONCE(init_pkru_value);
+	/*
+	 * Any write to PKRU takes it out of the XSAVE 'init
+	 * state' which increases context switch cost.  Avoid
+	 * writing 0 when PKRU was already 0.
+	 */
+	if (!init_pkru_value_snapshot && !read_pkru())
+		return;
+	/*
+	 * Override the PKRU state that came from 'init_fpstate'
+	 * with the baseline from the process.
+	 */
+	write_pkru(init_pkru_value_snapshot);
+}
+
+static ssize_t init_pkru_read_file(struct file *file, char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	char buf[32];
+	unsigned int len;
+
+	len = sprintf(buf, "0x%x\n", init_pkru_value);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t init_pkru_write_file(struct file *file,
+		 const char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char buf[32];
+	ssize_t len;
+	u32 new_init_pkru;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	/* Make the buffer a valid string that we can not overrun */
+	buf[len] = '\0';
+	if (kstrtouint(buf, 0, &new_init_pkru))
+		return -EINVAL;
+
+	/*
+	 * Don't allow insane settings that will blow the system
+	 * up immediately if someone attempts to disable access
+	 * or writes to pkey 0.
+	 */
+	if (new_init_pkru & (PKRU_AD_BIT|PKRU_WD_BIT))
+		return -EINVAL;
+
+	WRITE_ONCE(init_pkru_value, new_init_pkru);
+	return count;
+}
+
+static const struct file_operations fops_init_pkru = {
+	.read = init_pkru_read_file,
+	.write = init_pkru_write_file,
+	.llseek = default_llseek,
+};
+
+static int __init create_init_pkru_value(void)
+{
+	debugfs_create_file("init_pkru", S_IRUSR | S_IWUSR,
+			arch_debugfs_dir, NULL, &fops_init_pkru);
+	return 0;
+}
+late_initcall(create_init_pkru_value);
+
+static __init int setup_init_pkru(char *opt)
+{
+	u32 new_init_pkru;
+
+	if (kstrtouint(opt, 0, &new_init_pkru))
+		return 1;
+
+	WRITE_ONCE(init_pkru_value, new_init_pkru);
+
+	return 1;
+}
+__setup("init_pkru=", setup_init_pkru);
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 4dbe656..a7655f6 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -77,10 +77,25 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	unsigned cpu = smp_processor_id();
 
 	if (likely(prev != next)) {
+		if (IS_ENABLED(CONFIG_VMAP_STACK)) {
+			/*
+			 * If our current stack is in vmalloc space and isn't
+			 * mapped in the new pgd, we'll double-fault.  Forcibly
+			 * map it.
+			 */
+			unsigned int stack_pgd_index = pgd_index(current_stack_pointer());
+
+			pgd_t *pgd = next->pgd + stack_pgd_index;
+
+			if (unlikely(pgd_none(*pgd)))
+				set_pgd(pgd, init_mm.pgd[stack_pgd_index]);
+		}
+
 #ifdef CONFIG_SMP
 		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		this_cpu_write(cpu_tlbstate.active_mm, next);
 #endif
+
 		cpumask_set_cpu(cpu, mm_cpumask(next));
 
 		/*
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index cb31a44..a2488b6 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -16,27 +16,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/stacktrace.h>
-
-static int backtrace_stack(void *data, char *name)
-{
-	/* Yes, we want all stacks */
-	return 0;
-}
-
-static int backtrace_address(void *data, unsigned long addr, int reliable)
-{
-	unsigned int *depth = data;
-
-	if ((*depth)--)
-		oprofile_add_trace(addr);
-	return 0;
-}
-
-static struct stacktrace_ops backtrace_ops = {
-	.stack		= backtrace_stack,
-	.address	= backtrace_address,
-	.walk_stack	= print_context_stack,
-};
+#include <asm/unwind.h>
 
 #ifdef CONFIG_COMPAT
 static struct stack_frame_ia32 *
@@ -113,10 +93,29 @@ x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 	struct stack_frame *head = (struct stack_frame *)frame_pointer(regs);
 
 	if (!user_mode(regs)) {
-		unsigned long stack = kernel_stack_pointer(regs);
-		if (depth)
-			dump_trace(NULL, regs, (unsigned long *)stack, 0,
-				   &backtrace_ops, &depth);
+		struct unwind_state state;
+		unsigned long addr;
+
+		if (!depth)
+			return;
+
+		oprofile_add_trace(regs->ip);
+
+		if (!--depth)
+			return;
+
+		for (unwind_start(&state, current, regs, NULL);
+		     !unwind_done(&state); unwind_next_frame(&state)) {
+			addr = unwind_get_return_address(&state);
+			if (!addr)
+				break;
+
+			oprofile_add_trace(addr);
+
+			if (!--depth)
+				break;
+		}
+
 		return;
 	}
 
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 97062a6..5c6fc35 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -23,8 +23,6 @@ obj-y				+= bus_numa.o
 obj-$(CONFIG_AMD_NB)		+= amd_bus.o
 obj-$(CONFIG_PCI_CNB20LE_QUIRK)	+= broadcom_bus.o
 
-obj-$(CONFIG_VMD) += vmd.o
-
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
 endif
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 7b6a9d1..a4fdfa7 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -677,6 +677,12 @@ static void set_dma_domain_ops(struct pci_dev *pdev)
 static void set_dma_domain_ops(struct pci_dev *pdev) {}
 #endif
 
+static void set_dev_domain_options(struct pci_dev *pdev)
+{
+	if (is_vmd(pdev->bus))
+		pdev->hotplug_user_indicators = 1;
+}
+
 int pcibios_add_device(struct pci_dev *dev)
 {
 	struct setup_data *data;
@@ -707,6 +713,7 @@ int pcibios_add_device(struct pci_dev *dev)
 		iounmap(data);
 	}
 	set_dma_domain_ops(dev);
+	set_dev_domain_options(dev);
 	return 0;
 }
 
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 837ea36..6d52b94 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -553,15 +553,21 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
 
 /*
- * Broadwell EP Home Agent BARs erroneously return non-zero values when read.
+ * Device [8086:2fc0]
+ * Erratum HSE43
+ * CONFIG_TDP_NOMINAL CSR Implemented at Incorrect Offset
+ * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html
  *
- * See http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
- * entry BDF2.
+ * Devices [8086:6f60,6fa0,6fc0]
+ * Erratum BDF2
+ * PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration
+ * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html
  */
-static void pci_bdwep_bar(struct pci_dev *dev)
+static void pci_invalid_bar(struct pci_dev *dev)
 {
 	dev->non_compliant_bars = 1;
 }
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_bdwep_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2fc0, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6f60, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_invalid_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_invalid_bar);
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9770e55..1d97cea 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -120,9 +120,12 @@ static unsigned long __init bios32_service(unsigned long service)
 static struct {
 	unsigned long address;
 	unsigned short segment;
-} pci_indirect = { 0, __KERNEL_CS };
+} pci_indirect __ro_after_init = {
+	.address = 0,
+	.segment = __KERNEL_CS,
+};
 
-static int pci_bios_present;
+static int pci_bios_present __ro_after_init;
 
 static int __init check_pcibios(void)
 {
diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
deleted file mode 100644
index 7948be3..0000000
--- a/arch/x86/pci/vmd.c
+++ /dev/null
@@ -1,771 +0,0 @@
-/*
- * Volume Management Device driver
- * Copyright (c) 2015, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- */
-
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/msi.h>
-#include <linux/pci.h>
-#include <linux/rculist.h>
-#include <linux/rcupdate.h>
-
-#include <asm/irqdomain.h>
-#include <asm/device.h>
-#include <asm/msi.h>
-#include <asm/msidef.h>
-
-#define VMD_CFGBAR	0
-#define VMD_MEMBAR1	2
-#define VMD_MEMBAR2	4
-
-/*
- * Lock for manipulating VMD IRQ lists.
- */
-static DEFINE_RAW_SPINLOCK(list_lock);
-
-/**
- * struct vmd_irq - private data to map driver IRQ to the VMD shared vector
- * @node:	list item for parent traversal.
- * @rcu:	RCU callback item for freeing.
- * @irq:	back pointer to parent.
- * @enabled:	true if driver enabled IRQ
- * @virq:	the virtual IRQ value provided to the requesting driver.
- *
- * Every MSI/MSI-X IRQ requested for a device in a VMD domain will be mapped to
- * a VMD IRQ using this structure.
- */
-struct vmd_irq {
-	struct list_head	node;
-	struct rcu_head		rcu;
-	struct vmd_irq_list	*irq;
-	bool			enabled;
-	unsigned int		virq;
-};
-
-/**
- * struct vmd_irq_list - list of driver requested IRQs mapping to a VMD vector
- * @irq_list:	the list of irq's the VMD one demuxes to.
- * @vmd_vector:	the h/w IRQ assigned to the VMD.
- * @index:	index into the VMD MSI-X table; used for message routing.
- * @count:	number of child IRQs assigned to this vector; used to track
- *		sharing.
- */
-struct vmd_irq_list {
-	struct list_head	irq_list;
-	struct vmd_dev		*vmd;
-	unsigned int		vmd_vector;
-	unsigned int		index;
-	unsigned int		count;
-};
-
-struct vmd_dev {
-	struct pci_dev		*dev;
-
-	spinlock_t		cfg_lock;
-	char __iomem		*cfgbar;
-
-	int msix_count;
-	struct msix_entry	*msix_entries;
-	struct vmd_irq_list	*irqs;
-
-	struct pci_sysdata	sysdata;
-	struct resource		resources[3];
-	struct irq_domain	*irq_domain;
-	struct pci_bus		*bus;
-
-#ifdef CONFIG_X86_DEV_DMA_OPS
-	struct dma_map_ops	dma_ops;
-	struct dma_domain	dma_domain;
-#endif
-};
-
-static inline struct vmd_dev *vmd_from_bus(struct pci_bus *bus)
-{
-	return container_of(bus->sysdata, struct vmd_dev, sysdata);
-}
-
-/*
- * Drivers managing a device in a VMD domain allocate their own IRQs as before,
- * but the MSI entry for the hardware it's driving will be programmed with a
- * destination ID for the VMD MSI-X table.  The VMD muxes interrupts in its
- * domain into one of its own, and the VMD driver de-muxes these for the
- * handlers sharing that VMD IRQ.  The vmd irq_domain provides the operations
- * and irq_chip to set this up.
- */
-static void vmd_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
-{
-	struct vmd_irq *vmdirq = data->chip_data;
-	struct vmd_irq_list *irq = vmdirq->irq;
-
-	msg->address_hi = MSI_ADDR_BASE_HI;
-	msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_DEST_ID(irq->index);
-	msg->data = 0;
-}
-
-/*
- * We rely on MSI_FLAG_USE_DEF_CHIP_OPS to set the IRQ mask/unmask ops.
- */
-static void vmd_irq_enable(struct irq_data *data)
-{
-	struct vmd_irq *vmdirq = data->chip_data;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&list_lock, flags);
-	WARN_ON(vmdirq->enabled);
-	list_add_tail_rcu(&vmdirq->node, &vmdirq->irq->irq_list);
-	vmdirq->enabled = true;
-	raw_spin_unlock_irqrestore(&list_lock, flags);
-
-	data->chip->irq_unmask(data);
-}
-
-static void vmd_irq_disable(struct irq_data *data)
-{
-	struct vmd_irq *vmdirq = data->chip_data;
-	unsigned long flags;
-
-	data->chip->irq_mask(data);
-
-	raw_spin_lock_irqsave(&list_lock, flags);
-	if (vmdirq->enabled) {
-		list_del_rcu(&vmdirq->node);
-		vmdirq->enabled = false;
-	}
-	raw_spin_unlock_irqrestore(&list_lock, flags);
-}
-
-/*
- * XXX: Stubbed until we develop acceptable way to not create conflicts with
- * other devices sharing the same vector.
- */
-static int vmd_irq_set_affinity(struct irq_data *data,
-				const struct cpumask *dest, bool force)
-{
-	return -EINVAL;
-}
-
-static struct irq_chip vmd_msi_controller = {
-	.name			= "VMD-MSI",
-	.irq_enable		= vmd_irq_enable,
-	.irq_disable		= vmd_irq_disable,
-	.irq_compose_msi_msg	= vmd_compose_msi_msg,
-	.irq_set_affinity	= vmd_irq_set_affinity,
-};
-
-static irq_hw_number_t vmd_get_hwirq(struct msi_domain_info *info,
-				     msi_alloc_info_t *arg)
-{
-	return 0;
-}
-
-/*
- * XXX: We can be even smarter selecting the best IRQ once we solve the
- * affinity problem.
- */
-static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd, struct msi_desc *desc)
-{
-	int i, best = 1;
-	unsigned long flags;
-
-	if (!desc->msi_attrib.is_msix || vmd->msix_count == 1)
-		return &vmd->irqs[0];
-
-	raw_spin_lock_irqsave(&list_lock, flags);
-	for (i = 1; i < vmd->msix_count; i++)
-		if (vmd->irqs[i].count < vmd->irqs[best].count)
-			best = i;
-	vmd->irqs[best].count++;
-	raw_spin_unlock_irqrestore(&list_lock, flags);
-
-	return &vmd->irqs[best];
-}
-
-static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info,
-			unsigned int virq, irq_hw_number_t hwirq,
-			msi_alloc_info_t *arg)
-{
-	struct msi_desc *desc = arg->desc;
-	struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(desc)->bus);
-	struct vmd_irq *vmdirq = kzalloc(sizeof(*vmdirq), GFP_KERNEL);
-
-	if (!vmdirq)
-		return -ENOMEM;
-
-	INIT_LIST_HEAD(&vmdirq->node);
-	vmdirq->irq = vmd_next_irq(vmd, desc);
-	vmdirq->virq = virq;
-
-	irq_domain_set_info(domain, virq, vmdirq->irq->vmd_vector, info->chip,
-			    vmdirq, handle_untracked_irq, vmd, NULL);
-	return 0;
-}
-
-static void vmd_msi_free(struct irq_domain *domain,
-			struct msi_domain_info *info, unsigned int virq)
-{
-	struct vmd_irq *vmdirq = irq_get_chip_data(virq);
-	unsigned long flags;
-
-	/* XXX: Potential optimization to rebalance */
-	raw_spin_lock_irqsave(&list_lock, flags);
-	vmdirq->irq->count--;
-	raw_spin_unlock_irqrestore(&list_lock, flags);
-
-	kfree_rcu(vmdirq, rcu);
-}
-
-static int vmd_msi_prepare(struct irq_domain *domain, struct device *dev,
-			   int nvec, msi_alloc_info_t *arg)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct vmd_dev *vmd = vmd_from_bus(pdev->bus);
-
-	if (nvec > vmd->msix_count)
-		return vmd->msix_count;
-
-	memset(arg, 0, sizeof(*arg));
-	return 0;
-}
-
-static void vmd_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
-{
-	arg->desc = desc;
-}
-
-static struct msi_domain_ops vmd_msi_domain_ops = {
-	.get_hwirq	= vmd_get_hwirq,
-	.msi_init	= vmd_msi_init,
-	.msi_free	= vmd_msi_free,
-	.msi_prepare	= vmd_msi_prepare,
-	.set_desc	= vmd_set_desc,
-};
-
-static struct msi_domain_info vmd_msi_domain_info = {
-	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-			  MSI_FLAG_PCI_MSIX,
-	.ops		= &vmd_msi_domain_ops,
-	.chip		= &vmd_msi_controller,
-};
-
-#ifdef CONFIG_X86_DEV_DMA_OPS
-/*
- * VMD replaces the requester ID with its own.  DMA mappings for devices in a
- * VMD domain need to be mapped for the VMD, not the device requiring
- * the mapping.
- */
-static struct device *to_vmd_dev(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct vmd_dev *vmd = vmd_from_bus(pdev->bus);
-
-	return &vmd->dev->dev;
-}
-
-static struct dma_map_ops *vmd_dma_ops(struct device *dev)
-{
-	return get_dma_ops(to_vmd_dev(dev));
-}
-
-static void *vmd_alloc(struct device *dev, size_t size, dma_addr_t *addr,
-		       gfp_t flag, unsigned long attrs)
-{
-	return vmd_dma_ops(dev)->alloc(to_vmd_dev(dev), size, addr, flag,
-				       attrs);
-}
-
-static void vmd_free(struct device *dev, size_t size, void *vaddr,
-		     dma_addr_t addr, unsigned long attrs)
-{
-	return vmd_dma_ops(dev)->free(to_vmd_dev(dev), size, vaddr, addr,
-				      attrs);
-}
-
-static int vmd_mmap(struct device *dev, struct vm_area_struct *vma,
-		    void *cpu_addr, dma_addr_t addr, size_t size,
-		    unsigned long attrs)
-{
-	return vmd_dma_ops(dev)->mmap(to_vmd_dev(dev), vma, cpu_addr, addr,
-				      size, attrs);
-}
-
-static int vmd_get_sgtable(struct device *dev, struct sg_table *sgt,
-			   void *cpu_addr, dma_addr_t addr, size_t size,
-			   unsigned long attrs)
-{
-	return vmd_dma_ops(dev)->get_sgtable(to_vmd_dev(dev), sgt, cpu_addr,
-					     addr, size, attrs);
-}
-
-static dma_addr_t vmd_map_page(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction dir,
-			       unsigned long attrs)
-{
-	return vmd_dma_ops(dev)->map_page(to_vmd_dev(dev), page, offset, size,
-					  dir, attrs);
-}
-
-static void vmd_unmap_page(struct device *dev, dma_addr_t addr, size_t size,
-			   enum dma_data_direction dir, unsigned long attrs)
-{
-	vmd_dma_ops(dev)->unmap_page(to_vmd_dev(dev), addr, size, dir, attrs);
-}
-
-static int vmd_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction dir, unsigned long attrs)
-{
-	return vmd_dma_ops(dev)->map_sg(to_vmd_dev(dev), sg, nents, dir, attrs);
-}
-
-static void vmd_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
-			 enum dma_data_direction dir, unsigned long attrs)
-{
-	vmd_dma_ops(dev)->unmap_sg(to_vmd_dev(dev), sg, nents, dir, attrs);
-}
-
-static void vmd_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
-				    size_t size, enum dma_data_direction dir)
-{
-	vmd_dma_ops(dev)->sync_single_for_cpu(to_vmd_dev(dev), addr, size, dir);
-}
-
-static void vmd_sync_single_for_device(struct device *dev, dma_addr_t addr,
-				       size_t size, enum dma_data_direction dir)
-{
-	vmd_dma_ops(dev)->sync_single_for_device(to_vmd_dev(dev), addr, size,
-						 dir);
-}
-
-static void vmd_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction dir)
-{
-	vmd_dma_ops(dev)->sync_sg_for_cpu(to_vmd_dev(dev), sg, nents, dir);
-}
-
-static void vmd_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-				   int nents, enum dma_data_direction dir)
-{
-	vmd_dma_ops(dev)->sync_sg_for_device(to_vmd_dev(dev), sg, nents, dir);
-}
-
-static int vmd_mapping_error(struct device *dev, dma_addr_t addr)
-{
-	return vmd_dma_ops(dev)->mapping_error(to_vmd_dev(dev), addr);
-}
-
-static int vmd_dma_supported(struct device *dev, u64 mask)
-{
-	return vmd_dma_ops(dev)->dma_supported(to_vmd_dev(dev), mask);
-}
-
-#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
-static u64 vmd_get_required_mask(struct device *dev)
-{
-	return vmd_dma_ops(dev)->get_required_mask(to_vmd_dev(dev));
-}
-#endif
-
-static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
-{
-	struct dma_domain *domain = &vmd->dma_domain;
-
-	if (get_dma_ops(&vmd->dev->dev))
-		del_dma_domain(domain);
-}
-
-#define ASSIGN_VMD_DMA_OPS(source, dest, fn)	\
-	do {					\
-		if (source->fn)			\
-			dest->fn = vmd_##fn;	\
-	} while (0)
-
-static void vmd_setup_dma_ops(struct vmd_dev *vmd)
-{
-	const struct dma_map_ops *source = get_dma_ops(&vmd->dev->dev);
-	struct dma_map_ops *dest = &vmd->dma_ops;
-	struct dma_domain *domain = &vmd->dma_domain;
-
-	domain->domain_nr = vmd->sysdata.domain;
-	domain->dma_ops = dest;
-
-	if (!source)
-		return;
-	ASSIGN_VMD_DMA_OPS(source, dest, alloc);
-	ASSIGN_VMD_DMA_OPS(source, dest, free);
-	ASSIGN_VMD_DMA_OPS(source, dest, mmap);
-	ASSIGN_VMD_DMA_OPS(source, dest, get_sgtable);
-	ASSIGN_VMD_DMA_OPS(source, dest, map_page);
-	ASSIGN_VMD_DMA_OPS(source, dest, unmap_page);
-	ASSIGN_VMD_DMA_OPS(source, dest, map_sg);
-	ASSIGN_VMD_DMA_OPS(source, dest, unmap_sg);
-	ASSIGN_VMD_DMA_OPS(source, dest, sync_single_for_cpu);
-	ASSIGN_VMD_DMA_OPS(source, dest, sync_single_for_device);
-	ASSIGN_VMD_DMA_OPS(source, dest, sync_sg_for_cpu);
-	ASSIGN_VMD_DMA_OPS(source, dest, sync_sg_for_device);
-	ASSIGN_VMD_DMA_OPS(source, dest, mapping_error);
-	ASSIGN_VMD_DMA_OPS(source, dest, dma_supported);
-#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
-	ASSIGN_VMD_DMA_OPS(source, dest, get_required_mask);
-#endif
-	add_dma_domain(domain);
-}
-#undef ASSIGN_VMD_DMA_OPS
-#else
-static void vmd_teardown_dma_ops(struct vmd_dev *vmd) {}
-static void vmd_setup_dma_ops(struct vmd_dev *vmd) {}
-#endif
-
-static char __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
-				  unsigned int devfn, int reg, int len)
-{
-	char __iomem *addr = vmd->cfgbar +
-			     (bus->number << 20) + (devfn << 12) + reg;
-
-	if ((addr - vmd->cfgbar) + len >=
-	    resource_size(&vmd->dev->resource[VMD_CFGBAR]))
-		return NULL;
-
-	return addr;
-}
-
-/*
- * CPU may deadlock if config space is not serialized on some versions of this
- * hardware, so all config space access is done under a spinlock.
- */
-static int vmd_pci_read(struct pci_bus *bus, unsigned int devfn, int reg,
-			int len, u32 *value)
-{
-	struct vmd_dev *vmd = vmd_from_bus(bus);
-	char __iomem *addr = vmd_cfg_addr(vmd, bus, devfn, reg, len);
-	unsigned long flags;
-	int ret = 0;
-
-	if (!addr)
-		return -EFAULT;
-
-	spin_lock_irqsave(&vmd->cfg_lock, flags);
-	switch (len) {
-	case 1:
-		*value = readb(addr);
-		break;
-	case 2:
-		*value = readw(addr);
-		break;
-	case 4:
-		*value = readl(addr);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	spin_unlock_irqrestore(&vmd->cfg_lock, flags);
-	return ret;
-}
-
-/*
- * VMD h/w converts non-posted config writes to posted memory writes. The
- * read-back in this function forces the completion so it returns only after
- * the config space was written, as expected.
- */
-static int vmd_pci_write(struct pci_bus *bus, unsigned int devfn, int reg,
-			 int len, u32 value)
-{
-	struct vmd_dev *vmd = vmd_from_bus(bus);
-	char __iomem *addr = vmd_cfg_addr(vmd, bus, devfn, reg, len);
-	unsigned long flags;
-	int ret = 0;
-
-	if (!addr)
-		return -EFAULT;
-
-	spin_lock_irqsave(&vmd->cfg_lock, flags);
-	switch (len) {
-	case 1:
-		writeb(value, addr);
-		readb(addr);
-		break;
-	case 2:
-		writew(value, addr);
-		readw(addr);
-		break;
-	case 4:
-		writel(value, addr);
-		readl(addr);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	spin_unlock_irqrestore(&vmd->cfg_lock, flags);
-	return ret;
-}
-
-static struct pci_ops vmd_ops = {
-	.read		= vmd_pci_read,
-	.write		= vmd_pci_write,
-};
-
-static void vmd_attach_resources(struct vmd_dev *vmd)
-{
-	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
-	vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
-}
-
-static void vmd_detach_resources(struct vmd_dev *vmd)
-{
-	vmd->dev->resource[VMD_MEMBAR1].child = NULL;
-	vmd->dev->resource[VMD_MEMBAR2].child = NULL;
-}
-
-/*
- * VMD domains start at 0x1000 to not clash with ACPI _SEG domains.
- */
-static int vmd_find_free_domain(void)
-{
-	int domain = 0xffff;
-	struct pci_bus *bus = NULL;
-
-	while ((bus = pci_find_next_bus(bus)) != NULL)
-		domain = max_t(int, domain, pci_domain_nr(bus));
-	return domain + 1;
-}
-
-static int vmd_enable_domain(struct vmd_dev *vmd)
-{
-	struct pci_sysdata *sd = &vmd->sysdata;
-	struct resource *res;
-	u32 upper_bits;
-	unsigned long flags;
-	LIST_HEAD(resources);
-
-	res = &vmd->dev->resource[VMD_CFGBAR];
-	vmd->resources[0] = (struct resource) {
-		.name  = "VMD CFGBAR",
-		.start = 0,
-		.end   = (resource_size(res) >> 20) - 1,
-		.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
-	};
-
-	/*
-	 * If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
-	 * put 32-bit resources in the window.
-	 *
-	 * There's no hardware reason why a 64-bit window *couldn't*
-	 * contain a 32-bit resource, but pbus_size_mem() computes the
-	 * bridge window size assuming a 64-bit window will contain no
-	 * 32-bit resources.  __pci_assign_resource() enforces that
-	 * artificial restriction to make sure everything will fit.
-	 *
-	 * The only way we could use a 64-bit non-prefechable MEMBAR is
-	 * if its address is <4GB so that we can convert it to a 32-bit
-	 * resource.  To be visible to the host OS, all VMD endpoints must
-	 * be initially configured by platform BIOS, which includes setting
-	 * up these resources.  We can assume the device is configured
-	 * according to the platform needs.
-	 */
-	res = &vmd->dev->resource[VMD_MEMBAR1];
-	upper_bits = upper_32_bits(res->end);
-	flags = res->flags & ~IORESOURCE_SIZEALIGN;
-	if (!upper_bits)
-		flags &= ~IORESOURCE_MEM_64;
-	vmd->resources[1] = (struct resource) {
-		.name  = "VMD MEMBAR1",
-		.start = res->start,
-		.end   = res->end,
-		.flags = flags,
-		.parent = res,
-	};
-
-	res = &vmd->dev->resource[VMD_MEMBAR2];
-	upper_bits = upper_32_bits(res->end);
-	flags = res->flags & ~IORESOURCE_SIZEALIGN;
-	if (!upper_bits)
-		flags &= ~IORESOURCE_MEM_64;
-	vmd->resources[2] = (struct resource) {
-		.name  = "VMD MEMBAR2",
-		.start = res->start + 0x2000,
-		.end   = res->end,
-		.flags = flags,
-		.parent = res,
-	};
-
-	sd->domain = vmd_find_free_domain();
-	if (sd->domain < 0)
-		return sd->domain;
-
-	sd->node = pcibus_to_node(vmd->dev->bus);
-
-	vmd->irq_domain = pci_msi_create_irq_domain(NULL, &vmd_msi_domain_info,
-						    x86_vector_domain);
-	if (!vmd->irq_domain)
-		return -ENODEV;
-
-	pci_add_resource(&resources, &vmd->resources[0]);
-	pci_add_resource(&resources, &vmd->resources[1]);
-	pci_add_resource(&resources, &vmd->resources[2]);
-	vmd->bus = pci_create_root_bus(&vmd->dev->dev, 0, &vmd_ops, sd,
-				       &resources);
-	if (!vmd->bus) {
-		pci_free_resource_list(&resources);
-		irq_domain_remove(vmd->irq_domain);
-		return -ENODEV;
-	}
-
-	vmd_attach_resources(vmd);
-	vmd_setup_dma_ops(vmd);
-	dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
-	pci_rescan_bus(vmd->bus);
-
-	WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
-			       "domain"), "Can't create symlink to domain\n");
-	return 0;
-}
-
-static irqreturn_t vmd_irq(int irq, void *data)
-{
-	struct vmd_irq_list *irqs = data;
-	struct vmd_irq *vmdirq;
-
-	rcu_read_lock();
-	list_for_each_entry_rcu(vmdirq, &irqs->irq_list, node)
-		generic_handle_irq(vmdirq->virq);
-	rcu_read_unlock();
-
-	return IRQ_HANDLED;
-}
-
-static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	struct vmd_dev *vmd;
-	int i, err;
-
-	if (resource_size(&dev->resource[VMD_CFGBAR]) < (1 << 20))
-		return -ENOMEM;
-
-	vmd = devm_kzalloc(&dev->dev, sizeof(*vmd), GFP_KERNEL);
-	if (!vmd)
-		return -ENOMEM;
-
-	vmd->dev = dev;
-	err = pcim_enable_device(dev);
-	if (err < 0)
-		return err;
-
-	vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0);
-	if (!vmd->cfgbar)
-		return -ENOMEM;
-
-	pci_set_master(dev);
-	if (dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(64)) &&
-	    dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)))
-		return -ENODEV;
-
-	vmd->msix_count = pci_msix_vec_count(dev);
-	if (vmd->msix_count < 0)
-		return -ENODEV;
-
-	vmd->irqs = devm_kcalloc(&dev->dev, vmd->msix_count, sizeof(*vmd->irqs),
-				 GFP_KERNEL);
-	if (!vmd->irqs)
-		return -ENOMEM;
-
-	vmd->msix_entries = devm_kcalloc(&dev->dev, vmd->msix_count,
-					 sizeof(*vmd->msix_entries),
-					 GFP_KERNEL);
-	if (!vmd->msix_entries)
-		return -ENOMEM;
-	for (i = 0; i < vmd->msix_count; i++)
-		vmd->msix_entries[i].entry = i;
-
-	vmd->msix_count = pci_enable_msix_range(vmd->dev, vmd->msix_entries, 1,
-						vmd->msix_count);
-	if (vmd->msix_count < 0)
-		return vmd->msix_count;
-
-	for (i = 0; i < vmd->msix_count; i++) {
-		INIT_LIST_HEAD(&vmd->irqs[i].irq_list);
-		vmd->irqs[i].vmd_vector = vmd->msix_entries[i].vector;
-		vmd->irqs[i].index = i;
-
-		err = devm_request_irq(&dev->dev, vmd->irqs[i].vmd_vector,
-				       vmd_irq, 0, "vmd", &vmd->irqs[i]);
-		if (err)
-			return err;
-	}
-
-	spin_lock_init(&vmd->cfg_lock);
-	pci_set_drvdata(dev, vmd);
-	err = vmd_enable_domain(vmd);
-	if (err)
-		return err;
-
-	dev_info(&vmd->dev->dev, "Bound to PCI domain %04x\n",
-		 vmd->sysdata.domain);
-	return 0;
-}
-
-static void vmd_remove(struct pci_dev *dev)
-{
-	struct vmd_dev *vmd = pci_get_drvdata(dev);
-
-	vmd_detach_resources(vmd);
-	pci_set_drvdata(dev, NULL);
-	sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
-	pci_stop_root_bus(vmd->bus);
-	pci_remove_root_bus(vmd->bus);
-	vmd_teardown_dma_ops(vmd);
-	irq_domain_remove(vmd->irq_domain);
-}
-
-#ifdef CONFIG_PM
-static int vmd_suspend(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	pci_save_state(pdev);
-	return 0;
-}
-
-static int vmd_resume(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	pci_restore_state(pdev);
-	return 0;
-}
-#endif
-static SIMPLE_DEV_PM_OPS(vmd_dev_pm_ops, vmd_suspend, vmd_resume);
-
-static const struct pci_device_id vmd_ids[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x201d),},
-	{0,}
-};
-MODULE_DEVICE_TABLE(pci, vmd_ids);
-
-static struct pci_driver vmd_drv = {
-	.name		= "vmd",
-	.id_table	= vmd_ids,
-	.probe		= vmd_probe,
-	.remove		= vmd_remove,
-	.driver		= {
-		.pm	= &vmd_dev_pm_ops,
-	},
-};
-module_pci_driver(vmd_drv);
-
-MODULE_AUTHOR("Intel Corporation");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.6");
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 3a483cb..bedfab98 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -456,7 +456,7 @@ void __init xen_msi_init(void)
 
 int __init pci_xen_hvm_init(void)
 {
-	if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
+	if (!xen_feature(XENFEAT_hvm_pirqs))
 		return 0;
 
 #ifdef CONFIG_ACPI
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 184842e..3c3c19e 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -8,6 +8,7 @@ obj-y	+= iris/
 obj-y	+= intel/
 obj-y	+= intel-mid/
 obj-y	+= intel-quark/
+obj-y	+= mellanox/
 obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/
diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c
index 8ff7b93..d49d3be 100644
--- a/arch/x86/platform/atom/punit_atom_debug.c
+++ b/arch/x86/platform/atom/punit_atom_debug.c
@@ -155,7 +155,7 @@ static void punit_dbgfs_unregister(void)
 
 static const struct x86_cpu_id intel_punit_cpu_ids[] = {
 	ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt),
-	ICPU(INTEL_FAM6_ATOM_MERRIFIELD1, punit_device_tng),
+	ICPU(INTEL_FAM6_ATOM_MERRIFIELD,  punit_device_tng),
 	ICPU(INTEL_FAM6_ATOM_AIRMONT,	  punit_device_cht),
 	{}
 };
diff --git a/arch/x86/platform/efi/efi-bgrt.c b/arch/x86/platform/efi/efi-bgrt.c
index 6a2f569..6aad870 100644
--- a/arch/x86/platform/efi/efi-bgrt.c
+++ b/arch/x86/platform/efi/efi-bgrt.c
@@ -82,21 +82,12 @@ void __init efi_bgrt_init(void)
 	}
 	bgrt_image_size = bmp_header.size;
 
-	bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL | __GFP_NOWARN);
+	bgrt_image = memremap(bgrt_tab->image_address, bmp_header.size, MEMREMAP_WB);
 	if (!bgrt_image) {
-		pr_notice("Ignoring BGRT: failed to allocate memory for image (wanted %zu bytes)\n",
-		       bgrt_image_size);
-		return;
-	}
-
-	image = memremap(bgrt_tab->image_address, bmp_header.size, MEMREMAP_WB);
-	if (!image) {
 		pr_notice("Ignoring BGRT: failed to map image memory\n");
-		kfree(bgrt_image);
 		bgrt_image = NULL;
 		return;
 	}
 
-	memcpy(bgrt_image, image, bgrt_image_size);
-	memunmap(image);
+	efi_mem_reserve(bgrt_tab->image_address, bgrt_image_size);
 }
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 1fbb408..bf99aa7 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -166,13 +166,15 @@ static void __init do_add_efi_memmap(void)
 		}
 		e820_add_region(start, size, e820_type);
 	}
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
 }
 
 int __init efi_memblock_x86_reserve_range(void)
 {
 	struct efi_info *e = &boot_params.efi_info;
+	struct efi_memory_map_data data;
 	phys_addr_t pmap;
+	int rv;
 
 	if (efi_enabled(EFI_PARAVIRT))
 		return 0;
@@ -187,11 +189,17 @@ int __init efi_memblock_x86_reserve_range(void)
 #else
 	pmap = (e->efi_memmap |	((__u64)e->efi_memmap_hi << 32));
 #endif
-	efi.memmap.phys_map	= pmap;
-	efi.memmap.nr_map	= e->efi_memmap_size /
-				  e->efi_memdesc_size;
-	efi.memmap.desc_size	= e->efi_memdesc_size;
-	efi.memmap.desc_version	= e->efi_memdesc_version;
+	data.phys_map		= pmap;
+	data.size 		= e->efi_memmap_size;
+	data.desc_size		= e->efi_memdesc_size;
+	data.desc_version	= e->efi_memdesc_version;
+
+	rv = efi_memmap_init_early(&data);
+	if (rv)
+		return rv;
+
+	if (add_efi_memmap)
+		do_add_efi_memmap();
 
 	WARN(efi.memmap.desc_version != 1,
 	     "Unexpected EFI_MEMORY_DESCRIPTOR version %ld",
@@ -218,19 +226,6 @@ void __init efi_print_memmap(void)
 	}
 }
 
-void __init efi_unmap_memmap(void)
-{
-	unsigned long size;
-
-	clear_bit(EFI_MEMMAP, &efi.flags);
-
-	size = efi.memmap.nr_map * efi.memmap.desc_size;
-	if (efi.memmap.map) {
-		early_memunmap(efi.memmap.map, size);
-		efi.memmap.map = NULL;
-	}
-}
-
 static int __init efi_systab_init(void *phys)
 {
 	if (efi_enabled(EFI_64BIT)) {
@@ -414,33 +409,6 @@ static int __init efi_runtime_init(void)
 	return 0;
 }
 
-static int __init efi_memmap_init(void)
-{
-	unsigned long addr, size;
-
-	if (efi_enabled(EFI_PARAVIRT))
-		return 0;
-
-	/* Map the EFI memory map */
-	size = efi.memmap.nr_map * efi.memmap.desc_size;
-	addr = (unsigned long)efi.memmap.phys_map;
-
-	efi.memmap.map = early_memremap(addr, size);
-	if (efi.memmap.map == NULL) {
-		pr_err("Could not map the memory map!\n");
-		return -ENOMEM;
-	}
-
-	efi.memmap.map_end = efi.memmap.map + size;
-
-	if (add_efi_memmap)
-		do_add_efi_memmap();
-
-	set_bit(EFI_MEMMAP, &efi.flags);
-
-	return 0;
-}
-
 void __init efi_init(void)
 {
 	efi_char16_t *c16;
@@ -498,16 +466,14 @@ void __init efi_init(void)
 	if (!efi_runtime_supported())
 		pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
 	else {
-		if (efi_runtime_disabled() || efi_runtime_init())
+		if (efi_runtime_disabled() || efi_runtime_init()) {
+			efi_memmap_unmap();
 			return;
+		}
 	}
-	if (efi_memmap_init())
-		return;
 
 	if (efi_enabled(EFI_DBG))
 		efi_print_memmap();
-
-	efi_esrt_init();
 }
 
 void __init efi_late_init(void)
@@ -624,42 +590,6 @@ static void __init get_systab_virt_addr(efi_memory_desc_t *md)
 	}
 }
 
-static void __init save_runtime_map(void)
-{
-#ifdef CONFIG_KEXEC_CORE
-	unsigned long desc_size;
-	efi_memory_desc_t *md;
-	void *tmp, *q = NULL;
-	int count = 0;
-
-	if (efi_enabled(EFI_OLD_MEMMAP))
-		return;
-
-	desc_size = efi.memmap.desc_size;
-
-	for_each_efi_memory_desc(md) {
-		if (!(md->attribute & EFI_MEMORY_RUNTIME) ||
-		    (md->type == EFI_BOOT_SERVICES_CODE) ||
-		    (md->type == EFI_BOOT_SERVICES_DATA))
-			continue;
-		tmp = krealloc(q, (count + 1) * desc_size, GFP_KERNEL);
-		if (!tmp)
-			goto out;
-		q = tmp;
-
-		memcpy(q + count * desc_size, md, desc_size);
-		count++;
-	}
-
-	efi_runtime_map_setup(q, count, desc_size);
-	return;
-
-out:
-	kfree(q);
-	pr_err("Error saving runtime map, efi runtime on kexec non-functional!!\n");
-#endif
-}
-
 static void *realloc_pages(void *old_memmap, int old_shift)
 {
 	void *ret;
@@ -745,6 +675,46 @@ static void *efi_map_next_entry(void *entry)
 	return entry;
 }
 
+static bool should_map_region(efi_memory_desc_t *md)
+{
+	/*
+	 * Runtime regions always require runtime mappings (obviously).
+	 */
+	if (md->attribute & EFI_MEMORY_RUNTIME)
+		return true;
+
+	/*
+	 * 32-bit EFI doesn't suffer from the bug that requires us to
+	 * reserve boot services regions, and mixed mode support
+	 * doesn't exist for 32-bit kernels.
+	 */
+	if (IS_ENABLED(CONFIG_X86_32))
+		return false;
+
+	/*
+	 * Map all of RAM so that we can access arguments in the 1:1
+	 * mapping when making EFI runtime calls.
+	 */
+	if (IS_ENABLED(CONFIG_EFI_MIXED) && !efi_is_native()) {
+		if (md->type == EFI_CONVENTIONAL_MEMORY ||
+		    md->type == EFI_LOADER_DATA ||
+		    md->type == EFI_LOADER_CODE)
+			return true;
+	}
+
+	/*
+	 * Map boot services regions as a workaround for buggy
+	 * firmware that accesses them even when they shouldn't.
+	 *
+	 * See efi_{reserve,free}_boot_services().
+	 */
+	if (md->type == EFI_BOOT_SERVICES_CODE ||
+	    md->type == EFI_BOOT_SERVICES_DATA)
+		return true;
+
+	return false;
+}
+
 /*
  * Map the efi memory ranges of the runtime services and update new_mmap with
  * virtual addresses.
@@ -761,13 +731,9 @@ static void * __init efi_map_regions(int *count, int *pg_shift)
 	p = NULL;
 	while ((p = efi_map_next_entry(p))) {
 		md = p;
-		if (!(md->attribute & EFI_MEMORY_RUNTIME)) {
-#ifdef CONFIG_X86_64
-			if (md->type != EFI_BOOT_SERVICES_CODE &&
-			    md->type != EFI_BOOT_SERVICES_DATA)
-#endif
-				continue;
-		}
+
+		if (!should_map_region(md))
+			continue;
 
 		efi_map_region(md);
 		get_systab_virt_addr(md);
@@ -803,7 +769,7 @@ static void __init kexec_enter_virtual_mode(void)
 	 * non-native EFI
 	 */
 	if (!efi_is_native()) {
-		efi_unmap_memmap();
+		efi_memmap_unmap();
 		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 		return;
 	}
@@ -823,7 +789,18 @@ static void __init kexec_enter_virtual_mode(void)
 		get_systab_virt_addr(md);
 	}
 
-	save_runtime_map();
+	/*
+	 * Unregister the early EFI memmap from efi_init() and install
+	 * the new EFI memory map.
+	 */
+	efi_memmap_unmap();
+
+	if (efi_memmap_init_late(efi.memmap.phys_map,
+				 efi.memmap.desc_size * efi.memmap.nr_map)) {
+		pr_err("Failed to remap late EFI memory map\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return;
+	}
 
 	BUG_ON(!efi.systab);
 
@@ -884,6 +861,7 @@ static void __init __efi_enter_virtual_mode(void)
 	int count = 0, pg_shift = 0;
 	void *new_memmap = NULL;
 	efi_status_t status;
+	phys_addr_t pa;
 
 	efi.systab = NULL;
 
@@ -901,11 +879,24 @@ static void __init __efi_enter_virtual_mode(void)
 		return;
 	}
 
-	save_runtime_map();
+	pa = __pa(new_memmap);
+
+	/*
+	 * Unregister the early EFI memmap from efi_init() and install
+	 * the new EFI memory map that we are about to pass to the
+	 * firmware via SetVirtualAddressMap().
+	 */
+	efi_memmap_unmap();
+
+	if (efi_memmap_init_late(pa, efi.memmap.desc_size * count)) {
+		pr_err("Failed to remap late EFI memory map\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return;
+	}
 
 	BUG_ON(!efi.systab);
 
-	if (efi_setup_page_tables(__pa(new_memmap), 1 << pg_shift)) {
+	if (efi_setup_page_tables(pa, 1 << pg_shift)) {
 		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 		return;
 	}
@@ -917,14 +908,14 @@ static void __init __efi_enter_virtual_mode(void)
 				efi.memmap.desc_size * count,
 				efi.memmap.desc_size,
 				efi.memmap.desc_version,
-				(efi_memory_desc_t *)__pa(new_memmap));
+				(efi_memory_desc_t *)pa);
 	} else {
 		status = efi_thunk_set_virtual_address_map(
 				efi_phys.set_virtual_address_map,
 				efi.memmap.desc_size * count,
 				efi.memmap.desc_size,
 				efi.memmap.desc_version,
-				(efi_memory_desc_t *)__pa(new_memmap));
+				(efi_memory_desc_t *)pa);
 	}
 
 	if (status != EFI_SUCCESS) {
@@ -956,15 +947,6 @@ static void __init __efi_enter_virtual_mode(void)
 	efi_runtime_update_mappings();
 	efi_dump_pagetable();
 
-	/*
-	 * We mapped the descriptor array into the EFI pagetable above
-	 * but we're not unmapping it here because if we're running in
-	 * EFI mixed mode we need all of memory to be accessible when
-	 * we pass parameters to the EFI runtime services in the
-	 * thunking code.
-	 */
-	free_pages((unsigned long)new_memmap, pg_shift);
-
 	/* clean DUMMY object */
 	efi_delete_dummy_variable();
 }
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 677e29e..58b0f80 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -85,7 +85,7 @@ pgd_t * __init efi_call_phys_prolog(void)
 	early_code_mapping_set_exec(1);
 
 	n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
-	save_pgd = kmalloc(n_pgds * sizeof(pgd_t), GFP_KERNEL);
+	save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
 
 	for (pgd = 0; pgd < n_pgds; pgd++) {
 		save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE);
@@ -214,7 +214,6 @@ void efi_sync_low_kernel_mappings(void)
 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
 	unsigned long pfn, text;
-	efi_memory_desc_t *md;
 	struct page *page;
 	unsigned npages;
 	pgd_t *pgd;
@@ -245,28 +244,9 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	 * text and allocate a new stack because we can't rely on the
 	 * stack pointer being < 4GB.
 	 */
-	if (!IS_ENABLED(CONFIG_EFI_MIXED))
+	if (!IS_ENABLED(CONFIG_EFI_MIXED) || efi_is_native())
 		return 0;
 
-	/*
-	 * Map all of RAM so that we can access arguments in the 1:1
-	 * mapping when making EFI runtime calls.
-	 */
-	for_each_efi_memory_desc(md) {
-		if (md->type != EFI_CONVENTIONAL_MEMORY &&
-		    md->type != EFI_LOADER_DATA &&
-		    md->type != EFI_LOADER_CODE)
-			continue;
-
-		pfn = md->phys_addr >> PAGE_SHIFT;
-		npages = md->num_pages;
-
-		if (kernel_map_pages_in_pgd(pgd, pfn, md->phys_addr, npages, _PAGE_RW)) {
-			pr_err("Failed to map 1:1 memory\n");
-			return 1;
-		}
-	}
-
 	page = alloc_page(GFP_KERNEL|__GFP_DMA32);
 	if (!page)
 		panic("Unable to allocate EFI runtime stack < 4GB\n");
@@ -359,6 +339,7 @@ void __init efi_map_region(efi_memory_desc_t *md)
  */
 void __init efi_map_region_fixed(efi_memory_desc_t *md)
 {
+	__map_region(md, md->phys_addr);
 	__map_region(md, md->virt_addr);
 }
 
diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 89d1146..10aca63 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -164,6 +164,75 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size,
 EXPORT_SYMBOL_GPL(efi_query_variable_store);
 
 /*
+ * The UEFI specification makes it clear that the operating system is
+ * free to do whatever it wants with boot services code after
+ * ExitBootServices() has been called. Ignoring this recommendation a
+ * significant bunch of EFI implementations continue calling into boot
+ * services code (SetVirtualAddressMap). In order to work around such
+ * buggy implementations we reserve boot services region during EFI
+ * init and make sure it stays executable. Then, after
+ * SetVirtualAddressMap(), it is discarded.
+ *
+ * However, some boot services regions contain data that is required
+ * by drivers, so we need to track which memory ranges can never be
+ * freed. This is done by tagging those regions with the
+ * EFI_MEMORY_RUNTIME attribute.
+ *
+ * Any driver that wants to mark a region as reserved must use
+ * efi_mem_reserve() which will insert a new EFI memory descriptor
+ * into efi.memmap (splitting existing regions if necessary) and tag
+ * it with EFI_MEMORY_RUNTIME.
+ */
+void __init efi_arch_mem_reserve(phys_addr_t addr, u64 size)
+{
+	phys_addr_t new_phys, new_size;
+	struct efi_mem_range mr;
+	efi_memory_desc_t md;
+	int num_entries;
+	void *new;
+
+	if (efi_mem_desc_lookup(addr, &md)) {
+		pr_err("Failed to lookup EFI memory descriptor for %pa\n", &addr);
+		return;
+	}
+
+	if (addr + size > md.phys_addr + (md.num_pages << EFI_PAGE_SHIFT)) {
+		pr_err("Region spans EFI memory descriptors, %pa\n", &addr);
+		return;
+	}
+
+	size += addr % EFI_PAGE_SIZE;
+	size = round_up(size, EFI_PAGE_SIZE);
+	addr = round_down(addr, EFI_PAGE_SIZE);
+
+	mr.range.start = addr;
+	mr.range.end = addr + size - 1;
+	mr.attribute = md.attribute | EFI_MEMORY_RUNTIME;
+
+	num_entries = efi_memmap_split_count(&md, &mr.range);
+	num_entries += efi.memmap.nr_map;
+
+	new_size = efi.memmap.desc_size * num_entries;
+
+	new_phys = memblock_alloc(new_size, 0);
+	if (!new_phys) {
+		pr_err("Could not allocate boot services memmap\n");
+		return;
+	}
+
+	new = early_memremap(new_phys, new_size);
+	if (!new) {
+		pr_err("Failed to map new boot services memmap\n");
+		return;
+	}
+
+	efi_memmap_insert(&efi.memmap, new, &mr);
+	early_memunmap(new, new_size);
+
+	efi_memmap_install(new_phys, num_entries);
+}
+
+/*
  * Helper function for efi_reserve_boot_services() to figure out if we
  * can free regions in efi_free_boot_services().
  *
@@ -184,15 +253,6 @@ static bool can_free_region(u64 start, u64 size)
 	return true;
 }
 
-/*
- * The UEFI specification makes it clear that the operating system is free to do
- * whatever it wants with boot services code after ExitBootServices() has been
- * called. Ignoring this recommendation a significant bunch of EFI implementations 
- * continue calling into boot services code (SetVirtualAddressMap). In order to 
- * work around such buggy implementations we reserve boot services region during 
- * EFI init and make sure it stays executable. Then, after SetVirtualAddressMap(), it
-* is discarded.
-*/
 void __init efi_reserve_boot_services(void)
 {
 	efi_memory_desc_t *md;
@@ -249,7 +309,10 @@ void __init efi_reserve_boot_services(void)
 
 void __init efi_free_boot_services(void)
 {
+	phys_addr_t new_phys, new_size;
 	efi_memory_desc_t *md;
+	int num_entries = 0;
+	void *new, *new_md;
 
 	for_each_efi_memory_desc(md) {
 		unsigned long long start = md->phys_addr;
@@ -257,12 +320,16 @@ void __init efi_free_boot_services(void)
 		size_t rm_size;
 
 		if (md->type != EFI_BOOT_SERVICES_CODE &&
-		    md->type != EFI_BOOT_SERVICES_DATA)
+		    md->type != EFI_BOOT_SERVICES_DATA) {
+			num_entries++;
 			continue;
+		}
 
 		/* Do not free, someone else owns it: */
-		if (md->attribute & EFI_MEMORY_RUNTIME)
+		if (md->attribute & EFI_MEMORY_RUNTIME) {
+			num_entries++;
 			continue;
+		}
 
 		/*
 		 * Nasty quirk: if all sub-1MB memory is used for boot
@@ -287,7 +354,41 @@ void __init efi_free_boot_services(void)
 		free_bootmem_late(start, size);
 	}
 
-	efi_unmap_memmap();
+	new_size = efi.memmap.desc_size * num_entries;
+	new_phys = memblock_alloc(new_size, 0);
+	if (!new_phys) {
+		pr_err("Failed to allocate new EFI memmap\n");
+		return;
+	}
+
+	new = memremap(new_phys, new_size, MEMREMAP_WB);
+	if (!new) {
+		pr_err("Failed to map new EFI memmap\n");
+		return;
+	}
+
+	/*
+	 * Build a new EFI memmap that excludes any boot services
+	 * regions that are not tagged EFI_MEMORY_RUNTIME, since those
+	 * regions have now been freed.
+	 */
+	new_md = new;
+	for_each_efi_memory_desc(md) {
+		if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
+		    (md->type == EFI_BOOT_SERVICES_CODE ||
+		     md->type == EFI_BOOT_SERVICES_DATA))
+			continue;
+
+		memcpy(new_md, md, efi.memmap.desc_size);
+		new_md += efi.memmap.desc_size;
+	}
+
+	memunmap(new);
+
+	if (efi_memmap_install(new_phys, num_entries)) {
+		pr_err("Could not install new EFI memmap\n");
+		return;
+	}
 }
 
 /*
@@ -365,7 +466,7 @@ void __init efi_apply_memmap_quirks(void)
 	 */
 	if (!efi_runtime_supported()) {
 		pr_info("Setup done, disabling due to 32/64-bit mismatch\n");
-		efi_unmap_memmap();
+		efi_memmap_unmap();
 	}
 
 	/* UV2+ BIOS has a fix for this issue.  UV1 still needs the quirk. */
diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile
index fc135bf..429d08b 100644
--- a/arch/x86/platform/intel-mid/device_libs/Makefile
+++ b/arch/x86/platform/intel-mid/device_libs/Makefile
@@ -1,5 +1,9 @@
 # Family-Level Interface Shim (FLIS)
 obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o
+# SDHCI Devices
+obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += platform_mrfld_sd.o
+# WiFi
+obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
 # IPC Devices
 obj-y += platform_ipc.o
 obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
new file mode 100644
index 0000000..4392c15
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
@@ -0,0 +1,95 @@
+/*
+ * platform_bcm43xx.c: bcm43xx platform data initilization file
+ *
+ * (C) Copyright 2016 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/sfi.h>
+
+#include <asm/intel-mid.h>
+
+#define WLAN_SFI_GPIO_IRQ_NAME		"WLAN-interrupt"
+#define WLAN_SFI_GPIO_ENABLE_NAME	"WLAN-enable"
+
+#define WLAN_DEV_NAME			"0000:00:01.3"
+
+static struct regulator_consumer_supply bcm43xx_vmmc_supply = {
+	.dev_name		= WLAN_DEV_NAME,
+	.supply			= "vmmc",
+};
+
+static struct regulator_init_data bcm43xx_vmmc_data = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &bcm43xx_vmmc_supply,
+};
+
+static struct fixed_voltage_config bcm43xx_vmmc = {
+	.supply_name		= "bcm43xx-vmmc-regulator",
+	/*
+	 * Announce 2.0V here to be compatible with SDIO specification. The
+	 * real voltage and signaling are still 1.8V.
+	 */
+	.microvolts		= 2000000,		/* 1.8V */
+	.gpio			= -EINVAL,
+	.startup_delay		= 250 * 1000,		/* 250ms */
+	.enable_high		= 1,			/* active high */
+	.enabled_at_boot	= 0,			/* disabled at boot */
+	.init_data		= &bcm43xx_vmmc_data,
+};
+
+static struct platform_device bcm43xx_vmmc_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dev = {
+		.platform_data	= &bcm43xx_vmmc,
+	},
+};
+
+static int __init bcm43xx_regulator_register(void)
+{
+	int ret;
+
+	bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+	ret = platform_device_register(&bcm43xx_vmmc_regulator);
+	if (ret) {
+		pr_err("%s: vmmc regulator register failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __init *bcm43xx_platform_data(void *info)
+{
+	int ret;
+
+	ret = bcm43xx_regulator_register();
+	if (ret)
+		return NULL;
+
+	pr_info("Using generic wifi platform data\n");
+
+	/* For now it's empty */
+	return NULL;
+}
+
+static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = {
+	.name			= "bcm43xx_clk_vmmc",
+	.type			= SFI_DEV_TYPE_SD,
+	.get_platform_data	= &bcm43xx_platform_data,
+};
+
+sfi_device(bcm43xx_clk_vmmc_dev_id);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c
new file mode 100644
index 0000000..00c4a03
--- /dev/null
+++ b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c
@@ -0,0 +1,47 @@
+/*
+ * SDHCI platform data initilisation file
+ *
+ * (C) Copyright 2016 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <linux/mmc/sdhci-pci-data.h>
+
+#include <asm/intel-mid.h>
+
+#define INTEL_MRFLD_SD			2
+#define INTEL_MRFLD_SD_CD_GPIO		77
+
+static struct sdhci_pci_data mrfld_sdhci_pci_data = {
+	.rst_n_gpio	= -EINVAL,
+	.cd_gpio	= INTEL_MRFLD_SD_CD_GPIO,
+};
+
+static struct sdhci_pci_data *
+mrfld_sdhci_pci_get_data(struct pci_dev *pdev, int slotno)
+{
+	unsigned int func = PCI_FUNC(pdev->devfn);
+
+	if (func == INTEL_MRFLD_SD)
+		return &mrfld_sdhci_pci_data;
+
+	return NULL;
+}
+
+static int __init mrfld_sd_init(void)
+{
+	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
+		return -ENODEV;
+
+	sdhci_pci_get_data = mrfld_sdhci_pci_get_data;
+	return 0;
+}
+arch_initcall(mrfld_sd_init);
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index ce119d2..7850128 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -70,6 +70,11 @@ EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
 
 static void intel_mid_power_off(void)
 {
+	/* Shut down South Complex via PWRMU */
+	intel_mid_pwr_power_off();
+
+	/* Only for Tangier, the rest will ignore this command */
+	intel_scu_ipc_simple_command(IPCMSG_COLD_OFF, 1);
 };
 
 static void intel_mid_reboot(void)
diff --git a/arch/x86/platform/intel-mid/pwr.c b/arch/x86/platform/intel-mid/pwr.c
index c901a34..5d3b45a 100644
--- a/arch/x86/platform/intel-mid/pwr.c
+++ b/arch/x86/platform/intel-mid/pwr.c
@@ -44,7 +44,19 @@
 /* Bits in PM_CMD */
 #define PM_CMD_CMD(x)		((x) << 0)
 #define PM_CMD_IOC		(1 << 8)
-#define PM_CMD_D3cold		(1 << 21)
+#define PM_CMD_CM_NOP		(0 << 9)
+#define PM_CMD_CM_IMMEDIATE	(1 << 9)
+#define PM_CMD_CM_DELAY		(2 << 9)
+#define PM_CMD_CM_TRIGGER	(3 << 9)
+
+/* System states */
+#define PM_CMD_SYS_STATE_S5	(5 << 16)
+
+/* Trigger variants */
+#define PM_CMD_CFG_TRIGGER_NC	(3 << 19)
+
+/* Message to wait for TRIGGER_NC case */
+#define TRIGGER_NC_MSG_2	(2 << 22)
 
 /* List of commands */
 #define CMD_SET_CFG		0x01
@@ -137,7 +149,7 @@ static int mid_pwr_wait(struct mid_pwr *pwr)
 
 static int mid_pwr_wait_for_cmd(struct mid_pwr *pwr, u8 cmd)
 {
-	writel(PM_CMD_CMD(cmd), pwr->regs + PM_CMD);
+	writel(PM_CMD_CMD(cmd) | PM_CMD_CM_IMMEDIATE, pwr->regs + PM_CMD);
 	return mid_pwr_wait(pwr);
 }
 
@@ -260,6 +272,20 @@ int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state)
 }
 EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state);
 
+void intel_mid_pwr_power_off(void)
+{
+	struct mid_pwr *pwr = midpwr;
+	u32 cmd = PM_CMD_SYS_STATE_S5 |
+		  PM_CMD_CMD(CMD_SET_CFG) |
+		  PM_CMD_CM_TRIGGER |
+		  PM_CMD_CFG_TRIGGER_NC |
+		  TRIGGER_NC_MSG_2;
+
+	/* Send command to SCU */
+	writel(cmd, pwr->regs + PM_CMD);
+	mid_pwr_wait(pwr);
+}
+
 int intel_mid_pwr_get_lss_id(struct pci_dev *pdev)
 {
 	int vndr;
@@ -354,7 +380,7 @@ static int mid_pwr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 }
 
-static int mid_set_initial_state(struct mid_pwr *pwr)
+static int mid_set_initial_state(struct mid_pwr *pwr, const u32 *states)
 {
 	unsigned int i, j;
 	int ret;
@@ -379,10 +405,10 @@ static int mid_set_initial_state(struct mid_pwr *pwr)
 	 * NOTE: The actual device mapping is provided by a platform at run
 	 * time using vendor capability of PCI configuration space.
 	 */
-	mid_pwr_set_state(pwr, 0, 0xffffffff);
-	mid_pwr_set_state(pwr, 1, 0xffffffff);
-	mid_pwr_set_state(pwr, 2, 0xffffffff);
-	mid_pwr_set_state(pwr, 3, 0xffffffff);
+	mid_pwr_set_state(pwr, 0, states[0]);
+	mid_pwr_set_state(pwr, 1, states[1]);
+	mid_pwr_set_state(pwr, 2, states[2]);
+	mid_pwr_set_state(pwr, 3, states[3]);
 
 	/* Send command to SCU */
 	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
@@ -397,13 +423,41 @@ static int mid_set_initial_state(struct mid_pwr *pwr)
 	return 0;
 }
 
-static const struct mid_pwr_device_info mid_info = {
-	.set_initial_state = mid_set_initial_state,
+static int pnw_set_initial_state(struct mid_pwr *pwr)
+{
+	/* On Penwell SRAM must stay powered on */
+	const u32 states[] = {
+		0xf00fffff,		/* PM_SSC(0) */
+		0xffffffff,		/* PM_SSC(1) */
+		0xffffffff,		/* PM_SSC(2) */
+		0xffffffff,		/* PM_SSC(3) */
+	};
+	return mid_set_initial_state(pwr, states);
+}
+
+static int tng_set_initial_state(struct mid_pwr *pwr)
+{
+	const u32 states[] = {
+		0xffffffff,		/* PM_SSC(0) */
+		0xffffffff,		/* PM_SSC(1) */
+		0xffffffff,		/* PM_SSC(2) */
+		0xffffffff,		/* PM_SSC(3) */
+	};
+	return mid_set_initial_state(pwr, states);
+}
+
+static const struct mid_pwr_device_info pnw_info = {
+	.set_initial_state = pnw_set_initial_state,
+};
+
+static const struct mid_pwr_device_info tng_info = {
+	.set_initial_state = tng_set_initial_state,
 };
 
+/* This table should be in sync with the one in drivers/pci/pci-mid.c */
 static const struct pci_device_id mid_pwr_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&mid_info },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&mid_info },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&pnw_info },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info },
 	{}
 };
 
diff --git a/arch/x86/platform/mellanox/Makefile b/arch/x86/platform/mellanox/Makefile
new file mode 100644
index 0000000..f43c931
--- /dev/null
+++ b/arch/x86/platform/mellanox/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MLX_PLATFORM)	+= mlx-platform.o
diff --git a/arch/x86/platform/mellanox/mlx-platform.c b/arch/x86/platform/mellanox/mlx-platform.c
new file mode 100644
index 0000000..7dcfcca
--- /dev/null
+++ b/arch/x86/platform/mellanox/mlx-platform.c
@@ -0,0 +1,266 @@
+/*
+ * arch/x86/platform/mellanox/mlx-platform.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/i2c-mux-reg.h>
+
+#define MLX_PLAT_DEVICE_NAME		"mlxplat"
+
+/* LPC bus IO offsets */
+#define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR		0x2000
+#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR		0x2500
+#define MLXPLAT_CPLD_LPC_IO_RANGE		0x100
+#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF		0xdb
+#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF		0xda
+#define MLXPLAT_CPLD_LPC_PIO_OFFSET		0x10000UL
+#define MLXPLAT_CPLD_LPC_REG1	((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
+				  MLXPLAT_CPLD_LPC_I2C_CH1_OFF) | \
+				  MLXPLAT_CPLD_LPC_PIO_OFFSET)
+#define MLXPLAT_CPLD_LPC_REG2	((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
+				  MLXPLAT_CPLD_LPC_I2C_CH2_OFF) | \
+				  MLXPLAT_CPLD_LPC_PIO_OFFSET)
+
+/* Start channel numbers */
+#define MLXPLAT_CPLD_CH1			2
+#define MLXPLAT_CPLD_CH2			10
+
+/* Number of LPC attached MUX platform devices */
+#define MLXPLAT_CPLD_LPC_MUX_DEVS		2
+
+/* mlxplat_priv - platform private data
+ * @pdev_i2c - i2c controller platform device
+ * @pdev_mux - array of mux platform devices
+ */
+struct mlxplat_priv {
+	struct platform_device *pdev_i2c;
+	struct platform_device *pdev_mux[MLXPLAT_CPLD_LPC_MUX_DEVS];
+};
+
+/* Regions for LPC I2C controller and LPC base register space */
+static const struct resource mlxplat_lpc_resources[] = {
+	[0] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_I2C_BASE_ADRR,
+			       MLXPLAT_CPLD_LPC_IO_RANGE,
+			       "mlxplat_cpld_lpc_i2c_ctrl", IORESOURCE_IO),
+	[1] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
+			       MLXPLAT_CPLD_LPC_IO_RANGE,
+			       "mlxplat_cpld_lpc_regs",
+			       IORESOURCE_IO),
+};
+
+/* Platform default channels */
+static const int mlxplat_default_channels[][8] = {
+	{
+		MLXPLAT_CPLD_CH1, MLXPLAT_CPLD_CH1 + 1, MLXPLAT_CPLD_CH1 + 2,
+		MLXPLAT_CPLD_CH1 + 3, MLXPLAT_CPLD_CH1 + 4, MLXPLAT_CPLD_CH1 +
+		5, MLXPLAT_CPLD_CH1 + 6, MLXPLAT_CPLD_CH1 + 7
+	},
+	{
+		MLXPLAT_CPLD_CH2, MLXPLAT_CPLD_CH2 + 1, MLXPLAT_CPLD_CH2 + 2,
+		MLXPLAT_CPLD_CH2 + 3, MLXPLAT_CPLD_CH2 + 4, MLXPLAT_CPLD_CH2 +
+		5, MLXPLAT_CPLD_CH2 + 6, MLXPLAT_CPLD_CH2 + 7
+	},
+};
+
+/* Platform channels for MSN21xx system family */
+static const int mlxplat_msn21xx_channels[] = { 1, 2, 3, 4, 5, 6, 7, 8 };
+
+/* Platform mux data */
+static struct i2c_mux_reg_platform_data mlxplat_mux_data[] = {
+	{
+		.parent = 1,
+		.base_nr = MLXPLAT_CPLD_CH1,
+		.write_only = 1,
+		.reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG1,
+		.reg_size = 1,
+		.idle_in_use = 1,
+	},
+	{
+		.parent = 1,
+		.base_nr = MLXPLAT_CPLD_CH2,
+		.write_only = 1,
+		.reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG2,
+		.reg_size = 1,
+		.idle_in_use = 1,
+	},
+
+};
+
+static struct platform_device *mlxplat_dev;
+
+static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		mlxplat_mux_data[i].values = mlxplat_default_channels[i];
+		mlxplat_mux_data[i].n_values =
+				ARRAY_SIZE(mlxplat_default_channels[i]);
+	}
+
+	return 1;
+};
+
+static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
+		mlxplat_mux_data[i].n_values =
+				ARRAY_SIZE(mlxplat_msn21xx_channels);
+	}
+
+	return 1;
+};
+
+static struct dmi_system_id mlxplat_dmi_table[] __initdata = {
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN24"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN27"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSB"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSX"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_msn21xx_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN21"),
+		},
+	},
+	{ }
+};
+
+static int __init mlxplat_init(void)
+{
+	struct mlxplat_priv *priv;
+	int i, err;
+
+	if (!dmi_check_system(mlxplat_dmi_table))
+		return -ENODEV;
+
+	mlxplat_dev = platform_device_register_simple(MLX_PLAT_DEVICE_NAME, -1,
+					mlxplat_lpc_resources,
+					ARRAY_SIZE(mlxplat_lpc_resources));
+
+	if (IS_ERR(mlxplat_dev))
+		return PTR_ERR(mlxplat_dev);
+
+	priv = devm_kzalloc(&mlxplat_dev->dev, sizeof(struct mlxplat_priv),
+			    GFP_KERNEL);
+	if (!priv) {
+		err = -ENOMEM;
+		goto fail_alloc;
+	}
+	platform_set_drvdata(mlxplat_dev, priv);
+
+	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", -1,
+							 NULL, 0);
+	if (IS_ERR(priv->pdev_i2c)) {
+		err = PTR_ERR(priv->pdev_i2c);
+		goto fail_alloc;
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		priv->pdev_mux[i] = platform_device_register_resndata(
+						&mlxplat_dev->dev,
+						"i2c-mux-reg", i, NULL,
+						0, &mlxplat_mux_data[i],
+						sizeof(mlxplat_mux_data[i]));
+		if (IS_ERR(priv->pdev_mux[i])) {
+			err = PTR_ERR(priv->pdev_mux[i]);
+			goto fail_platform_mux_register;
+		}
+	}
+
+	return 0;
+
+fail_platform_mux_register:
+	for (i--; i > 0 ; i--)
+		platform_device_unregister(priv->pdev_mux[i]);
+	platform_device_unregister(priv->pdev_i2c);
+fail_alloc:
+	platform_device_unregister(mlxplat_dev);
+
+	return err;
+}
+module_init(mlxplat_init);
+
+static void __exit mlxplat_exit(void)
+{
+	struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev);
+	int i;
+
+	for (i = ARRAY_SIZE(mlxplat_mux_data) - 1; i >= 0 ; i--)
+		platform_device_unregister(priv->pdev_mux[i]);
+
+	platform_device_unregister(priv->pdev_i2c);
+	platform_device_unregister(mlxplat_dev);
+}
+module_exit(mlxplat_exit);
+
+MODULE_AUTHOR("Vadim Pasternak (vadimp@mellanox.com)");
+MODULE_DESCRIPTION("Mellanox platform driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSN24*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSN27*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSB*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSX*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSN21*:");
diff --git a/arch/x86/platform/uv/bios_uv.c b/arch/x86/platform/uv/bios_uv.c
index 23f2f3e..b4d5e95 100644
--- a/arch/x86/platform/uv/bios_uv.c
+++ b/arch/x86/platform/uv/bios_uv.c
@@ -149,11 +149,8 @@ EXPORT_SYMBOL_GPL(uv_bios_change_memprotect);
 s64
 uv_bios_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
 {
-	s64 ret;
-
-	ret = uv_bios_call_irqsave(UV_BIOS_GET_PARTITION_ADDR, (u64)cookie,
-					(u64)addr, buf, (u64)len, 0);
-	return ret;
+	return uv_bios_call_irqsave(UV_BIOS_GET_PARTITION_ADDR, (u64)cookie,
+				    (u64)addr, buf, (u64)len, 0);
 }
 EXPORT_SYMBOL_GPL(uv_bios_reserved_page_pa);
 
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index fdb4d42..9e42842 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -24,6 +24,29 @@
 #include <asm/irq_vectors.h>
 #include <asm/timer.h>
 
+static struct bau_operations ops;
+
+static struct bau_operations uv123_bau_ops = {
+	.bau_gpa_to_offset       = uv_gpa_to_offset,
+	.read_l_sw_ack           = read_mmr_sw_ack,
+	.read_g_sw_ack           = read_gmmr_sw_ack,
+	.write_l_sw_ack          = write_mmr_sw_ack,
+	.write_g_sw_ack          = write_gmmr_sw_ack,
+	.write_payload_first     = write_mmr_payload_first,
+	.write_payload_last      = write_mmr_payload_last,
+};
+
+static struct bau_operations uv4_bau_ops = {
+	.bau_gpa_to_offset       = uv_gpa_to_soc_phys_ram,
+	.read_l_sw_ack           = read_mmr_proc_sw_ack,
+	.read_g_sw_ack           = read_gmmr_proc_sw_ack,
+	.write_l_sw_ack          = write_mmr_proc_sw_ack,
+	.write_g_sw_ack          = write_gmmr_proc_sw_ack,
+	.write_payload_first     = write_mmr_proc_payload_first,
+	.write_payload_last      = write_mmr_proc_payload_last,
+};
+
+
 /* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */
 static int timeout_base_ns[] = {
 		20,
@@ -55,16 +78,16 @@ static int congested_reps	= CONGESTED_REPS;
 static int disabled_period	= DISABLED_PERIOD;
 
 static struct tunables tunables[] = {
-	{&max_concurr, MAX_BAU_CONCURRENT}, /* must be [0] */
-	{&plugged_delay, PLUGGED_DELAY},
-	{&plugsb4reset, PLUGSB4RESET},
-	{&timeoutsb4reset, TIMEOUTSB4RESET},
-	{&ipi_reset_limit, IPI_RESET_LIMIT},
-	{&complete_threshold, COMPLETE_THRESHOLD},
-	{&congested_respns_us, CONGESTED_RESPONSE_US},
-	{&congested_reps, CONGESTED_REPS},
-	{&disabled_period, DISABLED_PERIOD},
-	{&giveup_limit, GIVEUP_LIMIT}
+	{&max_concurr,           MAX_BAU_CONCURRENT}, /* must be [0] */
+	{&plugged_delay,         PLUGGED_DELAY},
+	{&plugsb4reset,          PLUGSB4RESET},
+	{&timeoutsb4reset,       TIMEOUTSB4RESET},
+	{&ipi_reset_limit,       IPI_RESET_LIMIT},
+	{&complete_threshold,    COMPLETE_THRESHOLD},
+	{&congested_respns_us,   CONGESTED_RESPONSE_US},
+	{&congested_reps,        CONGESTED_REPS},
+	{&disabled_period,       DISABLED_PERIOD},
+	{&giveup_limit,          GIVEUP_LIMIT}
 };
 
 static struct dentry *tunables_dir;
@@ -216,7 +239,7 @@ static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp,
 	msg = mdp->msg;
 	if (!msg->canceled && do_acknowledge) {
 		dw = (msg->swack_vec << UV_SW_ACK_NPENDING) | msg->swack_vec;
-		write_mmr_sw_ack(dw);
+		ops.write_l_sw_ack(dw);
 	}
 	msg->replied_to = 1;
 	msg->swack_vec = 0;
@@ -252,7 +275,7 @@ static void bau_process_retry_msg(struct msg_desc *mdp,
 			msg->swack_vec) == 0) &&
 		    (msg2->sending_cpu == msg->sending_cpu) &&
 		    (msg2->msg_type != MSG_NOOP)) {
-			mmr = read_mmr_sw_ack();
+			mmr = ops.read_l_sw_ack();
 			msg_res = msg2->swack_vec;
 			/*
 			 * This is a message retry; clear the resources held
@@ -270,7 +293,7 @@ static void bau_process_retry_msg(struct msg_desc *mdp,
 				stat->d_canceled++;
 				cancel_count++;
 				mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res;
-				write_mmr_sw_ack(mr);
+				ops.write_l_sw_ack(mr);
 			}
 		}
 	}
@@ -403,12 +426,12 @@ static void do_reset(void *ptr)
 			/*
 			 * only reset the resource if it is still pending
 			 */
-			mmr = read_mmr_sw_ack();
+			mmr = ops.read_l_sw_ack();
 			msg_res = msg->swack_vec;
 			mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res;
 			if (mmr & msg_res) {
 				stat->d_rcanceled++;
-				write_mmr_sw_ack(mr);
+				ops.write_l_sw_ack(mr);
 			}
 		}
 	}
@@ -580,11 +603,7 @@ static int uv1_wait_completion(struct bau_desc *bau_desc,
  */
 static unsigned long uv2_3_read_status(unsigned long offset, int rshft, int desc)
 {
-	unsigned long descriptor_status;
-
-	descriptor_status =
-		((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK) << 1;
-	return descriptor_status;
+	return ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK) << 1;
 }
 
 /*
@@ -1202,7 +1221,7 @@ void process_uv2_message(struct msg_desc *mdp, struct bau_control *bcp)
 	struct bau_pq_entry *msg = mdp->msg;
 	struct bau_pq_entry *other_msg;
 
-	mmr_image = read_mmr_sw_ack();
+	mmr_image = ops.read_l_sw_ack();
 	swack_vec = msg->swack_vec;
 
 	if ((swack_vec & mmr_image) == 0) {
@@ -1431,7 +1450,7 @@ static int ptc_seq_show(struct seq_file *file, void *data)
 		/* destination side statistics */
 		seq_printf(file,
 			"%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n",
-			   read_gmmr_sw_ack(uv_cpu_to_pnode(cpu)),
+			   ops.read_g_sw_ack(uv_cpu_to_pnode(cpu)),
 			   stat->d_requestee, cycles_2_us(stat->d_time),
 			   stat->d_alltlb, stat->d_onetlb, stat->d_multmsg,
 			   stat->d_nomsg, stat->d_retries, stat->d_canceled,
@@ -1497,16 +1516,16 @@ static ssize_t ptc_proc_write(struct file *file, const char __user *user,
 	}
 
 	if (kstrtol(optstr, 10, &input_arg) < 0) {
-		printk(KERN_DEBUG "%s is invalid\n", optstr);
+		pr_debug("%s is invalid\n", optstr);
 		return -EINVAL;
 	}
 
 	if (input_arg == 0) {
 		elements = ARRAY_SIZE(stat_description);
-		printk(KERN_DEBUG "# cpu:      cpu number\n");
-		printk(KERN_DEBUG "Sender statistics:\n");
+		pr_debug("# cpu:      cpu number\n");
+		pr_debug("Sender statistics:\n");
 		for (i = 0; i < elements; i++)
-			printk(KERN_DEBUG "%s\n", stat_description[i]);
+			pr_debug("%s\n", stat_description[i]);
 	} else if (input_arg == -1) {
 		for_each_present_cpu(cpu) {
 			stat = &per_cpu(ptcstats, cpu);
@@ -1554,7 +1573,7 @@ static int parse_tunables_write(struct bau_control *bcp, char *instr,
 			break;
 	}
 	if (cnt != e) {
-		printk(KERN_INFO "bau tunable error: should be %d values\n", e);
+		pr_info("bau tunable error: should be %d values\n", e);
 		return -EINVAL;
 	}
 
@@ -1571,7 +1590,7 @@ static int parse_tunables_write(struct bau_control *bcp, char *instr,
 				continue;
 			}
 			if (val < 1 || val > bcp->cpus_in_uvhub) {
-				printk(KERN_DEBUG
+				pr_debug(
 				"Error: BAU max concurrent %d is invalid\n",
 				val);
 				return -EINVAL;
@@ -1619,17 +1638,17 @@ static ssize_t tunables_write(struct file *file, const char __user *user,
 
 	for_each_present_cpu(cpu) {
 		bcp = &per_cpu(bau_control, cpu);
-		bcp->max_concurr =		max_concurr;
-		bcp->max_concurr_const =	max_concurr;
-		bcp->plugged_delay =		plugged_delay;
-		bcp->plugsb4reset =		plugsb4reset;
-		bcp->timeoutsb4reset =		timeoutsb4reset;
-		bcp->ipi_reset_limit =		ipi_reset_limit;
-		bcp->complete_threshold =	complete_threshold;
-		bcp->cong_response_us =		congested_respns_us;
-		bcp->cong_reps =		congested_reps;
-		bcp->disabled_period =		sec_2_cycles(disabled_period);
-		bcp->giveup_limit =		giveup_limit;
+		bcp->max_concurr         = max_concurr;
+		bcp->max_concurr_const   = max_concurr;
+		bcp->plugged_delay       = plugged_delay;
+		bcp->plugsb4reset        = plugsb4reset;
+		bcp->timeoutsb4reset     = timeoutsb4reset;
+		bcp->ipi_reset_limit     = ipi_reset_limit;
+		bcp->complete_threshold  = complete_threshold;
+		bcp->cong_response_us    = congested_respns_us;
+		bcp->cong_reps           = congested_reps;
+		bcp->disabled_period     = sec_2_cycles(disabled_period);
+		bcp->giveup_limit        = giveup_limit;
 	}
 	return count;
 }
@@ -1676,21 +1695,21 @@ static int __init uv_ptc_init(void)
 	proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
 				  &proc_uv_ptc_operations);
 	if (!proc_uv_ptc) {
-		printk(KERN_ERR "unable to create %s proc entry\n",
+		pr_err("unable to create %s proc entry\n",
 		       UV_PTC_BASENAME);
 		return -EINVAL;
 	}
 
 	tunables_dir = debugfs_create_dir(UV_BAU_TUNABLES_DIR, NULL);
 	if (!tunables_dir) {
-		printk(KERN_ERR "unable to create debugfs directory %s\n",
+		pr_err("unable to create debugfs directory %s\n",
 		       UV_BAU_TUNABLES_DIR);
 		return -EINVAL;
 	}
 	tunables_file = debugfs_create_file(UV_BAU_TUNABLES_FILE, 0600,
 					tunables_dir, NULL, &tunables_fops);
 	if (!tunables_file) {
-		printk(KERN_ERR "unable to create debugfs file %s\n",
+		pr_err("unable to create debugfs file %s\n",
 		       UV_BAU_TUNABLES_FILE);
 		return -EINVAL;
 	}
@@ -1725,7 +1744,7 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 
 	gpa = uv_gpa(bau_desc);
 	n = uv_gpa_to_gnode(gpa);
-	m = uv_gpa_to_offset(gpa);
+	m = ops.bau_gpa_to_offset(gpa);
 	if (is_uv1_hub())
 		uv1 = 1;
 
@@ -1740,7 +1759,7 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 		memset(bd2, 0, sizeof(struct bau_desc));
 		if (uv1) {
 			uv1_hdr = &bd2->header.uv1_hdr;
-			uv1_hdr->swack_flag =	1;
+			uv1_hdr->swack_flag = 1;
 			/*
 			 * The base_dest_nasid set in the message header
 			 * is the nasid of the first uvhub in the partition.
@@ -1749,10 +1768,10 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 			 * if nasid striding is being used.
 			 */
 			uv1_hdr->base_dest_nasid =
-						UV_PNODE_TO_NASID(base_pnode);
-			uv1_hdr->dest_subnodeid =	UV_LB_SUBNODEID;
-			uv1_hdr->command =		UV_NET_ENDPOINT_INTD;
-			uv1_hdr->int_both =		1;
+			                          UV_PNODE_TO_NASID(base_pnode);
+			uv1_hdr->dest_subnodeid  = UV_LB_SUBNODEID;
+			uv1_hdr->command         = UV_NET_ENDPOINT_INTD;
+			uv1_hdr->int_both        = 1;
 			/*
 			 * all others need to be set to zero:
 			 *   fairness chaining multilevel count replied_to
@@ -1763,11 +1782,11 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 			 * uses native mode for selective broadcasts.
 			 */
 			uv2_3_hdr = &bd2->header.uv2_3_hdr;
-			uv2_3_hdr->swack_flag =	1;
+			uv2_3_hdr->swack_flag      = 1;
 			uv2_3_hdr->base_dest_nasid =
-						UV_PNODE_TO_NASID(base_pnode);
-			uv2_3_hdr->dest_subnodeid =	UV_LB_SUBNODEID;
-			uv2_3_hdr->command =		UV_NET_ENDPOINT_INTD;
+			                          UV_PNODE_TO_NASID(base_pnode);
+			uv2_3_hdr->dest_subnodeid  = UV_LB_SUBNODEID;
+			uv2_3_hdr->command         = UV_NET_ENDPOINT_INTD;
 		}
 	}
 	for_each_present_cpu(cpu) {
@@ -1790,10 +1809,7 @@ static void pq_init(int node, int pnode)
 	size_t plsize;
 	char *cp;
 	void *vp;
-	unsigned long pn;
-	unsigned long first;
-	unsigned long pn_first;
-	unsigned long last;
+	unsigned long gnode, first, last, tail;
 	struct bau_pq_entry *pqp;
 	struct bau_control *bcp;
 
@@ -1814,17 +1830,25 @@ static void pq_init(int node, int pnode)
 		bcp->bau_msg_head	= pqp;
 		bcp->queue_last		= pqp + (DEST_Q_SIZE - 1);
 	}
+
+	first = ops.bau_gpa_to_offset(uv_gpa(pqp));
+	last = ops.bau_gpa_to_offset(uv_gpa(pqp + (DEST_Q_SIZE - 1)));
+
 	/*
-	 * need the gnode of where the memory was really allocated
+	 * Pre UV4, the gnode is required to locate the payload queue
+	 * and the payload queue tail must be maintained by the kernel.
 	 */
-	pn = uv_gpa_to_gnode(uv_gpa(pqp));
-	first = uv_physnodeaddr(pqp);
-	pn_first = ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | first;
-	last = uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1));
-	write_mmr_payload_first(pnode, pn_first);
-	write_mmr_payload_tail(pnode, first);
-	write_mmr_payload_last(pnode, last);
-	write_gmmr_sw_ack(pnode, 0xffffUL);
+	bcp = &per_cpu(bau_control, smp_processor_id());
+	if (bcp->uvhub_version <= 3) {
+		tail = first;
+		gnode = uv_gpa_to_gnode(uv_gpa(pqp));
+		first = (gnode << UV_PAYLOADQ_GNODE_SHIFT) | tail;
+		write_mmr_payload_tail(pnode, tail);
+	}
+
+	ops.write_payload_first(pnode, first);
+	ops.write_payload_last(pnode, last);
+	ops.write_g_sw_ack(pnode, 0xffffUL);
 
 	/* in effect, all msg_type's are set to MSG_NOOP */
 	memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE);
@@ -1914,8 +1938,8 @@ static void __init init_per_cpu_tunables(void)
 		bcp->complete_threshold		= complete_threshold;
 		bcp->cong_response_us		= congested_respns_us;
 		bcp->cong_reps			= congested_reps;
-		bcp->disabled_period =		sec_2_cycles(disabled_period);
-		bcp->giveup_limit =		giveup_limit;
+		bcp->disabled_period		= sec_2_cycles(disabled_period);
+		bcp->giveup_limit		= giveup_limit;
 		spin_lock_init(&bcp->queue_lock);
 		spin_lock_init(&bcp->uvhub_lock);
 		spin_lock_init(&bcp->disable_lock);
@@ -1944,7 +1968,7 @@ static int __init get_cpu_topology(int base_pnode,
 
 		pnode = uv_cpu_hub_info(cpu)->pnode;
 		if ((pnode - base_pnode) >= UV_DISTRIBUTION_SIZE) {
-			printk(KERN_EMERG
+			pr_emerg(
 				"cpu %d pnode %d-%d beyond %d; BAU disabled\n",
 				cpu, pnode, base_pnode, UV_DISTRIBUTION_SIZE);
 			return 1;
@@ -1969,7 +1993,7 @@ static int __init get_cpu_topology(int base_pnode,
 		sdp->cpu_number[sdp->num_cpus] = cpu;
 		sdp->num_cpus++;
 		if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) {
-			printk(KERN_EMERG "%d cpus per socket invalid\n",
+			pr_emerg("%d cpus per socket invalid\n",
 				sdp->num_cpus);
 			return 1;
 		}
@@ -2035,15 +2059,17 @@ static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp,
 			bcp->uvhub_version = 2;
 		else if (is_uv3_hub())
 			bcp->uvhub_version = 3;
+		else if (is_uv4_hub())
+			bcp->uvhub_version = 4;
 		else {
-			printk(KERN_EMERG "uvhub version not 1, 2 or 3\n");
+			pr_emerg("uvhub version not 1, 2, 3, or 4\n");
 			return 1;
 		}
 		bcp->uvhub_master = *hmasterp;
 		bcp->uvhub_cpu = uv_cpu_blade_processor_id(cpu);
 
 		if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
-			printk(KERN_EMERG "%d cpus per uvhub invalid\n",
+			pr_emerg("%d cpus per uvhub invalid\n",
 				bcp->uvhub_cpu);
 			return 1;
 		}
@@ -2098,7 +2124,8 @@ static int __init init_per_cpu(int nuvhubs, int base_part_pnode)
 	void *vp;
 	struct uvhub_desc *uvhub_descs;
 
-	timeout_us = calculate_destination_timeout();
+	if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+		timeout_us = calculate_destination_timeout();
 
 	vp = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
 	uvhub_descs = (struct uvhub_desc *)vp;
@@ -2138,6 +2165,15 @@ static int __init uv_bau_init(void)
 	if (!is_uv_system())
 		return 0;
 
+	if (is_uv4_hub())
+		ops = uv4_bau_ops;
+	else if (is_uv3_hub())
+		ops = uv123_bau_ops;
+	else if (is_uv2_hub())
+		ops = uv123_bau_ops;
+	else if (is_uv1_hub())
+		ops = uv123_bau_ops;
+
 	for_each_possible_cpu(cur_cpu) {
 		mask = &per_cpu(uv_flush_tlb_mask, cur_cpu);
 		zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
@@ -2153,7 +2189,9 @@ static int __init uv_bau_init(void)
 			uv_base_pnode = uv_blade_to_pnode(uvhub);
 	}
 
-	enable_timeouts();
+	/* software timeouts are not supported on UV4 */
+	if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+		enable_timeouts();
 
 	if (init_per_cpu(nuvhubs, uv_base_pnode)) {
 		set_bau_off();
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index b12c26e..53cace2 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -130,7 +130,7 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr0 = read_cr0();
 	ctxt->cr2 = read_cr2();
 	ctxt->cr3 = read_cr3();
-	ctxt->cr4 = __read_cr4_safe();
+	ctxt->cr4 = __read_cr4();
 #ifdef CONFIG_X86_64
 	ctxt->cr8 = read_cr8();
 #endif
diff --git a/arch/x86/ras/mce_amd_inj.c b/arch/x86/ras/mce_amd_inj.c
index 1104515..1ac7647 100644
--- a/arch/x86/ras/mce_amd_inj.c
+++ b/arch/x86/ras/mce_amd_inj.c
@@ -68,6 +68,7 @@ static int inj_##reg##_set(void *data, u64 val)				\
 MCE_INJECT_SET(status);
 MCE_INJECT_SET(misc);
 MCE_INJECT_SET(addr);
+MCE_INJECT_SET(synd);
 
 #define MCE_INJECT_GET(reg)						\
 static int inj_##reg##_get(void *data, u64 *val)			\
@@ -81,10 +82,12 @@ static int inj_##reg##_get(void *data, u64 *val)			\
 MCE_INJECT_GET(status);
 MCE_INJECT_GET(misc);
 MCE_INJECT_GET(addr);
+MCE_INJECT_GET(synd);
 
 DEFINE_SIMPLE_ATTRIBUTE(status_fops, inj_status_get, inj_status_set, "%llx\n");
 DEFINE_SIMPLE_ATTRIBUTE(misc_fops, inj_misc_get, inj_misc_set, "%llx\n");
 DEFINE_SIMPLE_ATTRIBUTE(addr_fops, inj_addr_get, inj_addr_set, "%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(synd_fops, inj_synd_get, inj_synd_set, "%llx\n");
 
 /*
  * Caller needs to be make sure this cpu doesn't disappear
@@ -243,27 +246,27 @@ static void toggle_nb_mca_mst_cpu(u16 nid)
 
 static void prepare_msrs(void *info)
 {
-	struct mce i_mce = *(struct mce *)info;
-	u8 b = i_mce.bank;
+	struct mce m = *(struct mce *)info;
+	u8 b = m.bank;
 
-	wrmsrl(MSR_IA32_MCG_STATUS, i_mce.mcgstatus);
+	wrmsrl(MSR_IA32_MCG_STATUS, m.mcgstatus);
 
 	if (boot_cpu_has(X86_FEATURE_SMCA)) {
-		if (i_mce.inject_flags == DFR_INT_INJ) {
-			wrmsrl(MSR_AMD64_SMCA_MCx_DESTAT(b), i_mce.status);
-			wrmsrl(MSR_AMD64_SMCA_MCx_DEADDR(b), i_mce.addr);
+		if (m.inject_flags == DFR_INT_INJ) {
+			wrmsrl(MSR_AMD64_SMCA_MCx_DESTAT(b), m.status);
+			wrmsrl(MSR_AMD64_SMCA_MCx_DEADDR(b), m.addr);
 		} else {
-			wrmsrl(MSR_AMD64_SMCA_MCx_STATUS(b), i_mce.status);
-			wrmsrl(MSR_AMD64_SMCA_MCx_ADDR(b), i_mce.addr);
+			wrmsrl(MSR_AMD64_SMCA_MCx_STATUS(b), m.status);
+			wrmsrl(MSR_AMD64_SMCA_MCx_ADDR(b), m.addr);
 		}
 
-		wrmsrl(MSR_AMD64_SMCA_MCx_MISC(b), i_mce.misc);
+		wrmsrl(MSR_AMD64_SMCA_MCx_MISC(b), m.misc);
+		wrmsrl(MSR_AMD64_SMCA_MCx_SYND(b), m.synd);
 	} else {
-		wrmsrl(MSR_IA32_MCx_STATUS(b), i_mce.status);
-		wrmsrl(MSR_IA32_MCx_ADDR(b), i_mce.addr);
-		wrmsrl(MSR_IA32_MCx_MISC(b), i_mce.misc);
+		wrmsrl(MSR_IA32_MCx_STATUS(b), m.status);
+		wrmsrl(MSR_IA32_MCx_ADDR(b), m.addr);
+		wrmsrl(MSR_IA32_MCx_MISC(b), m.misc);
 	}
-
 }
 
 static void do_inject(void)
@@ -275,6 +278,9 @@ static void do_inject(void)
 	if (i_mce.misc)
 		i_mce.status |= MCI_STATUS_MISCV;
 
+	if (i_mce.synd)
+		i_mce.status |= MCI_STATUS_SYNDV;
+
 	if (inj_type == SW_INJ) {
 		mce_inject_log(&i_mce);
 		return;
@@ -301,7 +307,9 @@ static void do_inject(void)
 	 * only on the node base core. Refer to D18F3x44[NbMcaToMstCpuEn] for
 	 * Fam10h and later BKDGs.
 	 */
-	if (static_cpu_has(X86_FEATURE_AMD_DCM) && b == 4) {
+	if (static_cpu_has(X86_FEATURE_AMD_DCM) &&
+	    b == 4 &&
+	    boot_cpu_data.x86 < 0x17) {
 		toggle_nb_mca_mst_cpu(amd_get_nb_id(cpu));
 		cpu = get_nbc_for_node(amd_get_nb_id(cpu));
 	}
@@ -371,6 +379,9 @@ static const char readme_msg[] =
 "\t used for error thresholding purposes and its validity is indicated by\n"
 "\t MCi_STATUS[MiscV].\n"
 "\n"
+"synd:\t Set MCi_SYND: provide syndrome info about the error. Only valid on\n"
+"\t Scalable MCA systems, and its validity is indicated by MCi_STATUS[SyndV].\n"
+"\n"
 "addr:\t Error address value to be written to MCi_ADDR. Log address information\n"
 "\t associated with the error.\n"
 "\n"
@@ -420,6 +431,7 @@ static struct dfs_node {
 	{ .name = "status",	.fops = &status_fops, .perm = S_IRUSR | S_IWUSR },
 	{ .name = "misc",	.fops = &misc_fops,   .perm = S_IRUSR | S_IWUSR },
 	{ .name = "addr",	.fops = &addr_fops,   .perm = S_IRUSR | S_IWUSR },
+	{ .name = "synd",	.fops = &synd_fops,   .perm = S_IRUSR | S_IWUSR },
 	{ .name = "bank",	.fops = &bank_fops,   .perm = S_IRUSR | S_IWUSR },
 	{ .name = "flags",	.fops = &flags_fops,  .perm = S_IRUSR | S_IWUSR },
 	{ .name = "cpu",	.fops = &extcpu_fops, .perm = S_IRUSR | S_IWUSR },
@@ -428,7 +440,7 @@ static struct dfs_node {
 
 static int __init init_mce_inject(void)
 {
-	int i;
+	unsigned int i;
 	u64 cap;
 
 	rdmsrl(MSR_IA32_MCG_CAP, cap);
@@ -452,26 +464,22 @@ static int __init init_mce_inject(void)
 	return 0;
 
 err_dfs_add:
-	while (--i >= 0)
+	while (i-- > 0)
 		debugfs_remove(dfs_fls[i].d);
 
 	debugfs_remove(dfs_inj);
 	dfs_inj = NULL;
 
-	return -ENOMEM;
+	return -ENODEV;
 }
 
 static void __exit exit_mce_inject(void)
 {
-	int i;
 
-	for (i = 0; i < ARRAY_SIZE(dfs_fls); i++)
-		debugfs_remove(dfs_fls[i].d);
+	debugfs_remove_recursive(dfs_inj);
+	dfs_inj = NULL;
 
 	memset(&dfs_fls, 0, sizeof(dfs_fls));
-
-	debugfs_remove(dfs_inj);
-	dfs_inj = NULL;
 }
 module_init(init_mce_inject);
 module_exit(exit_mce_inject);
diff --git a/arch/x86/um/ptrace_32.c b/arch/x86/um/ptrace_32.c
index ebd4dd6..5766ead 100644
--- a/arch/x86/um/ptrace_32.c
+++ b/arch/x86/um/ptrace_32.c
@@ -84,7 +84,10 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	case EAX:
 	case EIP:
 	case UESP:
+		break;
 	case ORIG_EAX:
+		/* Update the syscall number. */
+		UPT_SYSCALL_NR(&child->thread.regs.regs) = value;
 		break;
 	case FS:
 		if (value && (value & 3) != 3)
@@ -191,7 +194,7 @@ int peek_user(struct task_struct *child, long addr, long data)
 
 static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
-	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
+	int err, n, cpu = task_cpu(child);
 	struct user_i387_struct fpregs;
 
 	err = save_i387_registers(userspace_pid[cpu],
@@ -208,7 +211,7 @@ static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *c
 
 static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
-	int n, cpu = ((struct thread_info *) child->stack)->cpu;
+	int n, cpu = task_cpu(child);
 	struct user_i387_struct fpregs;
 
 	n = copy_from_user(&fpregs, buf, sizeof(fpregs));
@@ -221,7 +224,7 @@ static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *c
 
 static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
-	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
+	int err, n, cpu = task_cpu(child);
 	struct user_fxsr_struct fpregs;
 
 	err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
@@ -237,7 +240,7 @@ static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *
 
 static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
-	int n, cpu = ((struct thread_info *) child->stack)->cpu;
+	int n, cpu = task_cpu(child);
 	struct user_fxsr_struct fpregs;
 
 	n = copy_from_user(&fpregs, buf, sizeof(fpregs));
diff --git a/arch/x86/um/ptrace_64.c b/arch/x86/um/ptrace_64.c
index faab418..0b5c184 100644
--- a/arch/x86/um/ptrace_64.c
+++ b/arch/x86/um/ptrace_64.c
@@ -78,7 +78,11 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	case RSI:
 	case RDI:
 	case RBP:
+		break;
+
 	case ORIG_RAX:
+		/* Update the syscall number. */
+		UPT_SYSCALL_NR(&child->thread.regs.regs) = value;
 		break;
 
 	case FS:
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index b86ebb1..c0fdd57 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -137,8 +137,10 @@ struct shared_info xen_dummy_shared_info;
 void *xen_initial_gdt;
 
 RESERVE_BRK(shared_info_page_brk, PAGE_SIZE);
-__read_mostly int xen_have_vector_callback;
-EXPORT_SYMBOL_GPL(xen_have_vector_callback);
+
+static int xen_cpu_up_prepare(unsigned int cpu);
+static int xen_cpu_up_online(unsigned int cpu);
+static int xen_cpu_dead(unsigned int cpu);
 
 /*
  * Point at some empty memory to start with. We map the real shared_info
@@ -1237,7 +1239,6 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 	.write_cr0 = xen_write_cr0,
 
 	.read_cr4 = native_read_cr4,
-	.read_cr4_safe = native_read_cr4_safe,
 	.write_cr4 = xen_write_cr4,
 
 #ifdef CONFIG_X86_64
@@ -1520,10 +1521,7 @@ static void __init xen_pvh_early_guest_init(void)
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
 		return;
 
-	if (!xen_feature(XENFEAT_hvm_callback_vector))
-		return;
-
-	xen_have_vector_callback = 1;
+	BUG_ON(!xen_feature(XENFEAT_hvm_callback_vector));
 
 	xen_pvh_early_cpu_init(0, false);
 	xen_pvh_set_cr_flags(0);
@@ -1539,6 +1537,24 @@ static void __init xen_dom0_set_legacy_features(void)
 	x86_platform.legacy.rtc = 1;
 }
 
+static int xen_cpuhp_setup(void)
+{
+	int rc;
+
+	rc = cpuhp_setup_state_nocalls(CPUHP_XEN_PREPARE,
+				       "XEN_HVM_GUEST_PREPARE",
+				       xen_cpu_up_prepare, xen_cpu_dead);
+	if (rc >= 0) {
+		rc = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+					       "XEN_HVM_GUEST_ONLINE",
+					       xen_cpu_up_online, NULL);
+		if (rc < 0)
+			cpuhp_remove_state_nocalls(CPUHP_XEN_PREPARE);
+	}
+
+	return rc >= 0 ? 0 : rc;
+}
+
 /* First C function to be called on Xen boot */
 asmlinkage __visible void __init xen_start_kernel(void)
 {
@@ -1640,6 +1656,8 @@ asmlinkage __visible void __init xen_start_kernel(void)
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+	WARN_ON(xen_cpuhp_setup());
+
 	local_irq_disable();
 	early_boot_irqs_disabled = true;
 
@@ -1820,31 +1838,54 @@ static void __init init_hvm_pv_info(void)
 	xen_domain_type = XEN_HVM_DOMAIN;
 }
 
-static int xen_hvm_cpu_notify(struct notifier_block *self, unsigned long action,
-			      void *hcpu)
+static int xen_cpu_up_prepare(unsigned int cpu)
 {
-	int cpu = (long)hcpu;
-	switch (action) {
-	case CPU_UP_PREPARE:
+	int rc;
+
+	if (xen_hvm_domain()) {
+		/*
+		 * This can happen if CPU was offlined earlier and
+		 * offlining timed out in common_cpu_die().
+		 */
+		if (cpu_report_state(cpu) == CPU_DEAD_FROZEN) {
+			xen_smp_intr_free(cpu);
+			xen_uninit_lock_cpu(cpu);
+		}
+
 		if (cpu_acpi_id(cpu) != U32_MAX)
 			per_cpu(xen_vcpu_id, cpu) = cpu_acpi_id(cpu);
 		else
 			per_cpu(xen_vcpu_id, cpu) = cpu;
 		xen_vcpu_setup(cpu);
-		if (xen_have_vector_callback) {
-			if (xen_feature(XENFEAT_hvm_safe_pvclock))
-				xen_setup_timer(cpu);
-		}
-		break;
-	default:
-		break;
 	}
-	return NOTIFY_OK;
+
+	if (xen_pv_domain() || xen_feature(XENFEAT_hvm_safe_pvclock))
+		xen_setup_timer(cpu);
+
+	rc = xen_smp_intr_init(cpu);
+	if (rc) {
+		WARN(1, "xen_smp_intr_init() for CPU %d failed: %d\n",
+		     cpu, rc);
+		return rc;
+	}
+	return 0;
 }
 
-static struct notifier_block xen_hvm_cpu_notifier = {
-	.notifier_call	= xen_hvm_cpu_notify,
-};
+static int xen_cpu_dead(unsigned int cpu)
+{
+	xen_smp_intr_free(cpu);
+
+	if (xen_pv_domain() || xen_feature(XENFEAT_hvm_safe_pvclock))
+		xen_teardown_timer(cpu);
+
+	return 0;
+}
+
+static int xen_cpu_up_online(unsigned int cpu)
+{
+	xen_init_lock_cpu(cpu);
+	return 0;
+}
 
 #ifdef CONFIG_KEXEC_CORE
 static void xen_hvm_shutdown(void)
@@ -1872,10 +1913,10 @@ static void __init xen_hvm_guest_init(void)
 
 	xen_panic_handler_init();
 
-	if (xen_feature(XENFEAT_hvm_callback_vector))
-		xen_have_vector_callback = 1;
+	BUG_ON(!xen_feature(XENFEAT_hvm_callback_vector));
+
 	xen_hvm_smp_init();
-	register_cpu_notifier(&xen_hvm_cpu_notifier);
+	WARN_ON(xen_cpuhp_setup());
 	xen_unplug_emulated_devices();
 	x86_init.irqs.intr_init = xen_init_IRQ;
 	xen_hvm_init_time_ops();
@@ -1911,7 +1952,7 @@ bool xen_hvm_need_lapic(void)
 		return false;
 	if (!xen_hvm_domain())
 		return false;
-	if (xen_feature(XENFEAT_hvm_pirqs) && xen_have_vector_callback)
+	if (xen_feature(XENFEAT_hvm_pirqs))
 		return false;
 	return true;
 }
@@ -1925,6 +1966,45 @@ static void xen_set_cpu_features(struct cpuinfo_x86 *c)
 	}
 }
 
+static void xen_pin_vcpu(int cpu)
+{
+	static bool disable_pinning;
+	struct sched_pin_override pin_override;
+	int ret;
+
+	if (disable_pinning)
+		return;
+
+	pin_override.pcpu = cpu;
+	ret = HYPERVISOR_sched_op(SCHEDOP_pin_override, &pin_override);
+
+	/* Ignore errors when removing override. */
+	if (cpu < 0)
+		return;
+
+	switch (ret) {
+	case -ENOSYS:
+		pr_warn("Unable to pin on physical cpu %d. In case of problems consider vcpu pinning.\n",
+			cpu);
+		disable_pinning = true;
+		break;
+	case -EPERM:
+		WARN(1, "Trying to pin vcpu without having privilege to do so\n");
+		disable_pinning = true;
+		break;
+	case -EINVAL:
+	case -EBUSY:
+		pr_warn("Physical cpu %d not available for pinning. Check Xen cpu configuration.\n",
+			cpu);
+		break;
+	case 0:
+		break;
+	default:
+		WARN(1, "rc %d while trying to pin vcpu\n", ret);
+		disable_pinning = true;
+	}
+}
+
 const struct hypervisor_x86 x86_hyper_xen = {
 	.name			= "Xen",
 	.detect			= xen_platform,
@@ -1933,6 +2013,7 @@ const struct hypervisor_x86 x86_hyper_xen = {
 #endif
 	.x2apic_available	= xen_x2apic_para_available,
 	.set_cpu_features       = xen_set_cpu_features,
+	.pin_vcpu               = xen_pin_vcpu,
 };
 EXPORT_SYMBOL(x86_hyper_xen);
 
diff --git a/arch/x86/xen/grant-table.c b/arch/x86/xen/grant-table.c
index de4144c..809b6c8 100644
--- a/arch/x86/xen/grant-table.c
+++ b/arch/x86/xen/grant-table.c
@@ -89,7 +89,7 @@ void arch_gnttab_unmap(void *shared, unsigned long nr_gframes)
 
 static int arch_gnttab_valloc(struct gnttab_vm_area *area, unsigned nr_frames)
 {
-	area->ptes = kmalloc(sizeof(pte_t *) * nr_frames, GFP_KERNEL);
+	area->ptes = kmalloc_array(nr_frames, sizeof(*area->ptes), GFP_KERNEL);
 	if (area->ptes == NULL)
 		return -ENOMEM;
 
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
index d37a0c7..90d1b83 100644
--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -61,7 +61,7 @@ static int check_platform_magic(void)
 		}
 		break;
 	default:
-		printk(KERN_WARNING "Xen Platform PCI: unknown I/O protocol version");
+		printk(KERN_WARNING "Xen Platform PCI: unknown I/O protocol version\n");
 		return XEN_PLATFORM_ERR_PROTOCOL;
 	}
 
diff --git a/arch/x86/xen/pmu.c b/arch/x86/xen/pmu.c
index 32bdc2c..b9fc525 100644
--- a/arch/x86/xen/pmu.c
+++ b/arch/x86/xen/pmu.c
@@ -547,8 +547,11 @@ void xen_pmu_init(int cpu)
 	return;
 
 fail:
-	pr_info_once("Could not initialize VPMU for cpu %d, error %d\n",
-		cpu, err);
+	if (err == -EOPNOTSUPP || err == -ENOSYS)
+		pr_info_once("VPMU disabled by hypervisor.\n");
+	else
+		pr_info_once("Could not initialize VPMU for cpu %d, error %d\n",
+			cpu, err);
 	free_pages((unsigned long)xenpmu_data, 0);
 }
 
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 1764252..f8960fc 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -861,7 +861,7 @@ char * __init xen_memory_setup(void)
 	e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
 			E820_RESERVED);
 
-	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+	sanitize_e820_map(e820->map, ARRAY_SIZE(e820->map), &e820->nr_map);
 
 	/*
 	 * Check whether the kernel itself conflicts with the target E820 map.
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 0b4d04c..9fa27ce 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -87,6 +87,12 @@ static void cpu_bringup(void)
 	cpu_data(cpu).x86_max_cores = 1;
 	set_cpu_sibling_map(cpu);
 
+	/*
+	 * identify_cpu() may have set logical_pkg_id to -1 due
+	 * to incorrect phys_proc_id. Let's re-comupte it.
+	 */
+	topology_update_package_map(apic->cpu_present_to_apicid(cpu), cpu);
+
 	xen_setup_cpu_clockevents();
 
 	notify_cpu_starting(cpu);
@@ -115,7 +121,7 @@ asmlinkage __visible void cpu_bringup_and_idle(int cpu)
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
-static void xen_smp_intr_free(unsigned int cpu)
+void xen_smp_intr_free(unsigned int cpu)
 {
 	if (per_cpu(xen_resched_irq, cpu).irq >= 0) {
 		unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu).irq, NULL);
@@ -159,7 +165,7 @@ static void xen_smp_intr_free(unsigned int cpu)
 		per_cpu(xen_pmu_irq, cpu).name = NULL;
 	}
 };
-static int xen_smp_intr_init(unsigned int cpu)
+int xen_smp_intr_init(unsigned int cpu)
 {
 	int rc;
 	char *resched_name, *callfunc_name, *debug_name, *pmu_name;
@@ -475,8 +481,6 @@ static int xen_cpu_up(unsigned int cpu, struct task_struct *idle)
 	common_cpu_up(cpu, idle);
 
 	xen_setup_runstate_info(cpu);
-	xen_setup_timer(cpu);
-	xen_init_lock_cpu(cpu);
 
 	/*
 	 * PV VCPUs are always successfully taken down (see 'while' loop
@@ -495,10 +499,6 @@ static int xen_cpu_up(unsigned int cpu, struct task_struct *idle)
 
 	xen_pmu_init(cpu);
 
-	rc = xen_smp_intr_init(cpu);
-	if (rc)
-		return rc;
-
 	rc = HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL);
 	BUG_ON(rc);
 
@@ -769,47 +769,10 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus)
 	xen_init_lock_cpu(0);
 }
 
-static int xen_hvm_cpu_up(unsigned int cpu, struct task_struct *tidle)
-{
-	int rc;
-
-	/*
-	 * This can happen if CPU was offlined earlier and
-	 * offlining timed out in common_cpu_die().
-	 */
-	if (cpu_report_state(cpu) == CPU_DEAD_FROZEN) {
-		xen_smp_intr_free(cpu);
-		xen_uninit_lock_cpu(cpu);
-	}
-
-	/*
-	 * xen_smp_intr_init() needs to run before native_cpu_up()
-	 * so that IPI vectors are set up on the booting CPU before
-	 * it is marked online in native_cpu_up().
-	*/
-	rc = xen_smp_intr_init(cpu);
-	WARN_ON(rc);
-	if (!rc)
-		rc =  native_cpu_up(cpu, tidle);
-
-	/*
-	 * We must initialize the slowpath CPU kicker _after_ the native
-	 * path has executed. If we initialized it before none of the
-	 * unlocker IPI kicks would reach the booting CPU as the booting
-	 * CPU had not set itself 'online' in cpu_online_mask. That mask
-	 * is checked when IPIs are sent (on HVM at least).
-	 */
-	xen_init_lock_cpu(cpu);
-	return rc;
-}
-
 void __init xen_hvm_smp_init(void)
 {
-	if (!xen_have_vector_callback)
-		return;
 	smp_ops.smp_prepare_cpus = xen_hvm_smp_prepare_cpus;
 	smp_ops.smp_send_reschedule = xen_smp_send_reschedule;
-	smp_ops.cpu_up = xen_hvm_cpu_up;
 	smp_ops.cpu_die = xen_cpu_die;
 	smp_ops.send_call_func_ipi = xen_smp_send_call_function_ipi;
 	smp_ops.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi;
diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h
index 963d62a..c5c16dc 100644
--- a/arch/x86/xen/smp.h
+++ b/arch/x86/xen/smp.h
@@ -1,5 +1,6 @@
 #ifndef _XEN_SMP_H
 
+#ifdef CONFIG_SMP
 extern void xen_send_IPI_mask(const struct cpumask *mask,
 			      int vector);
 extern void xen_send_IPI_mask_allbutself(const struct cpumask *mask,
@@ -8,6 +9,18 @@ extern void xen_send_IPI_allbutself(int vector);
 extern void xen_send_IPI_all(int vector);
 extern void xen_send_IPI_self(int vector);
 
+extern int xen_smp_intr_init(unsigned int cpu);
+extern void xen_smp_intr_free(unsigned int cpu);
+
+#else /* CONFIG_SMP */
+
+static inline int xen_smp_intr_init(unsigned int cpu)
+{
+	return 0;
+}
+static inline void xen_smp_intr_free(unsigned int cpu) {}
+#endif /* CONFIG_SMP */
+
 #ifdef CONFIG_XEN_PVH
 extern void xen_pvh_early_cpu_init(int cpu, bool entry);
 #else
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index f42e78d..3d6e006 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -21,8 +21,6 @@ static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
 static DEFINE_PER_CPU(char *, irq_name);
 static bool xen_pvspin = true;
 
-#ifdef CONFIG_QUEUED_SPINLOCKS
-
 #include <asm/qspinlock.h>
 
 static void xen_qlock_kick(int cpu)
@@ -71,207 +69,6 @@ static void xen_qlock_wait(u8 *byte, u8 val)
 	xen_poll_irq(irq);
 }
 
-#else /* CONFIG_QUEUED_SPINLOCKS */
-
-enum xen_contention_stat {
-	TAKEN_SLOW,
-	TAKEN_SLOW_PICKUP,
-	TAKEN_SLOW_SPURIOUS,
-	RELEASED_SLOW,
-	RELEASED_SLOW_KICKED,
-	NR_CONTENTION_STATS
-};
-
-
-#ifdef CONFIG_XEN_DEBUG_FS
-#define HISTO_BUCKETS	30
-static struct xen_spinlock_stats
-{
-	u32 contention_stats[NR_CONTENTION_STATS];
-	u32 histo_spin_blocked[HISTO_BUCKETS+1];
-	u64 time_blocked;
-} spinlock_stats;
-
-static u8 zero_stats;
-
-static inline void check_zero(void)
-{
-	u8 ret;
-	u8 old = READ_ONCE(zero_stats);
-	if (unlikely(old)) {
-		ret = cmpxchg(&zero_stats, old, 0);
-		/* This ensures only one fellow resets the stat */
-		if (ret == old)
-			memset(&spinlock_stats, 0, sizeof(spinlock_stats));
-	}
-}
-
-static inline void add_stats(enum xen_contention_stat var, u32 val)
-{
-	check_zero();
-	spinlock_stats.contention_stats[var] += val;
-}
-
-static inline u64 spin_time_start(void)
-{
-	return xen_clocksource_read();
-}
-
-static void __spin_time_accum(u64 delta, u32 *array)
-{
-	unsigned index = ilog2(delta);
-
-	check_zero();
-
-	if (index < HISTO_BUCKETS)
-		array[index]++;
-	else
-		array[HISTO_BUCKETS]++;
-}
-
-static inline void spin_time_accum_blocked(u64 start)
-{
-	u32 delta = xen_clocksource_read() - start;
-
-	__spin_time_accum(delta, spinlock_stats.histo_spin_blocked);
-	spinlock_stats.time_blocked += delta;
-}
-#else  /* !CONFIG_XEN_DEBUG_FS */
-static inline void add_stats(enum xen_contention_stat var, u32 val)
-{
-}
-
-static inline u64 spin_time_start(void)
-{
-	return 0;
-}
-
-static inline void spin_time_accum_blocked(u64 start)
-{
-}
-#endif  /* CONFIG_XEN_DEBUG_FS */
-
-struct xen_lock_waiting {
-	struct arch_spinlock *lock;
-	__ticket_t want;
-};
-
-static DEFINE_PER_CPU(struct xen_lock_waiting, lock_waiting);
-static cpumask_t waiting_cpus;
-
-__visible void xen_lock_spinning(struct arch_spinlock *lock, __ticket_t want)
-{
-	int irq = __this_cpu_read(lock_kicker_irq);
-	struct xen_lock_waiting *w = this_cpu_ptr(&lock_waiting);
-	int cpu = smp_processor_id();
-	u64 start;
-	__ticket_t head;
-	unsigned long flags;
-
-	/* If kicker interrupts not initialized yet, just spin */
-	if (irq == -1)
-		return;
-
-	start = spin_time_start();
-
-	/*
-	 * Make sure an interrupt handler can't upset things in a
-	 * partially setup state.
-	 */
-	local_irq_save(flags);
-	/*
-	 * We don't really care if we're overwriting some other
-	 * (lock,want) pair, as that would mean that we're currently
-	 * in an interrupt context, and the outer context had
-	 * interrupts enabled.  That has already kicked the VCPU out
-	 * of xen_poll_irq(), so it will just return spuriously and
-	 * retry with newly setup (lock,want).
-	 *
-	 * The ordering protocol on this is that the "lock" pointer
-	 * may only be set non-NULL if the "want" ticket is correct.
-	 * If we're updating "want", we must first clear "lock".
-	 */
-	w->lock = NULL;
-	smp_wmb();
-	w->want = want;
-	smp_wmb();
-	w->lock = lock;
-
-	/* This uses set_bit, which atomic and therefore a barrier */
-	cpumask_set_cpu(cpu, &waiting_cpus);
-	add_stats(TAKEN_SLOW, 1);
-
-	/* clear pending */
-	xen_clear_irq_pending(irq);
-
-	/* Only check lock once pending cleared */
-	barrier();
-
-	/*
-	 * Mark entry to slowpath before doing the pickup test to make
-	 * sure we don't deadlock with an unlocker.
-	 */
-	__ticket_enter_slowpath(lock);
-
-	/* make sure enter_slowpath, which is atomic does not cross the read */
-	smp_mb__after_atomic();
-
-	/*
-	 * check again make sure it didn't become free while
-	 * we weren't looking
-	 */
-	head = READ_ONCE(lock->tickets.head);
-	if (__tickets_equal(head, want)) {
-		add_stats(TAKEN_SLOW_PICKUP, 1);
-		goto out;
-	}
-
-	/* Allow interrupts while blocked */
-	local_irq_restore(flags);
-
-	/*
-	 * If an interrupt happens here, it will leave the wakeup irq
-	 * pending, which will cause xen_poll_irq() to return
-	 * immediately.
-	 */
-
-	/* Block until irq becomes pending (or perhaps a spurious wakeup) */
-	xen_poll_irq(irq);
-	add_stats(TAKEN_SLOW_SPURIOUS, !xen_test_irq_pending(irq));
-
-	local_irq_save(flags);
-
-	kstat_incr_irq_this_cpu(irq);
-out:
-	cpumask_clear_cpu(cpu, &waiting_cpus);
-	w->lock = NULL;
-
-	local_irq_restore(flags);
-
-	spin_time_accum_blocked(start);
-}
-PV_CALLEE_SAVE_REGS_THUNK(xen_lock_spinning);
-
-static void xen_unlock_kick(struct arch_spinlock *lock, __ticket_t next)
-{
-	int cpu;
-
-	add_stats(RELEASED_SLOW, 1);
-
-	for_each_cpu(cpu, &waiting_cpus) {
-		const struct xen_lock_waiting *w = &per_cpu(lock_waiting, cpu);
-
-		/* Make sure we read lock before want */
-		if (READ_ONCE(w->lock) == lock &&
-		    READ_ONCE(w->want) == next) {
-			add_stats(RELEASED_SLOW_KICKED, 1);
-			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
-			break;
-		}
-	}
-}
-#endif /* CONFIG_QUEUED_SPINLOCKS */
-
 static irqreturn_t dummy_handler(int irq, void *dev_id)
 {
 	BUG();
@@ -334,16 +131,12 @@ void __init xen_init_spinlocks(void)
 		return;
 	}
 	printk(KERN_DEBUG "xen: PV spinlocks enabled\n");
-#ifdef CONFIG_QUEUED_SPINLOCKS
+
 	__pv_init_lock_hash();
 	pv_lock_ops.queued_spin_lock_slowpath = __pv_queued_spin_lock_slowpath;
 	pv_lock_ops.queued_spin_unlock = PV_CALLEE_SAVE(__pv_queued_spin_unlock);
 	pv_lock_ops.wait = xen_qlock_wait;
 	pv_lock_ops.kick = xen_qlock_kick;
-#else
-	pv_lock_ops.lock_spinning = PV_CALLEE_SAVE(xen_lock_spinning);
-	pv_lock_ops.unlock_kick = xen_unlock_kick;
-#endif
 }
 
 /*
@@ -372,44 +165,3 @@ static __init int xen_parse_nopvspin(char *arg)
 }
 early_param("xen_nopvspin", xen_parse_nopvspin);
 
-#if defined(CONFIG_XEN_DEBUG_FS) && !defined(CONFIG_QUEUED_SPINLOCKS)
-
-static struct dentry *d_spin_debug;
-
-static int __init xen_spinlock_debugfs(void)
-{
-	struct dentry *d_xen = xen_init_debugfs();
-
-	if (d_xen == NULL)
-		return -ENOMEM;
-
-	if (!xen_pvspin)
-		return 0;
-
-	d_spin_debug = debugfs_create_dir("spinlocks", d_xen);
-
-	debugfs_create_u8("zero_stats", 0644, d_spin_debug, &zero_stats);
-
-	debugfs_create_u32("taken_slow", 0444, d_spin_debug,
-			   &spinlock_stats.contention_stats[TAKEN_SLOW]);
-	debugfs_create_u32("taken_slow_pickup", 0444, d_spin_debug,
-			   &spinlock_stats.contention_stats[TAKEN_SLOW_PICKUP]);
-	debugfs_create_u32("taken_slow_spurious", 0444, d_spin_debug,
-			   &spinlock_stats.contention_stats[TAKEN_SLOW_SPURIOUS]);
-
-	debugfs_create_u32("released_slow", 0444, d_spin_debug,
-			   &spinlock_stats.contention_stats[RELEASED_SLOW]);
-	debugfs_create_u32("released_slow_kicked", 0444, d_spin_debug,
-			   &spinlock_stats.contention_stats[RELEASED_SLOW_KICKED]);
-
-	debugfs_create_u64("time_blocked", 0444, d_spin_debug,
-			   &spinlock_stats.time_blocked);
-
-	debugfs_create_u32_array("histo_blocked", 0444, d_spin_debug,
-				spinlock_stats.histo_spin_blocked, HISTO_BUCKETS + 1);
-
-	return 0;
-}
-fs_initcall(xen_spinlock_debugfs);
-
-#endif	/* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 67356d2..33d8f6a 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -432,11 +432,6 @@ static void xen_hvm_setup_cpu_clockevents(void)
 
 void __init xen_hvm_init_time_ops(void)
 {
-	/* vector callback is needed otherwise we cannot receive interrupts
-	 * on cpu > 0 and at this point we don't know how many cpus are
-	 * available */
-	if (!xen_have_vector_callback)
-		return;
 	if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
 		printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
 				"disable pv timer\n");
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 64336f6..f610586 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -13,16 +13,19 @@ config XTENSA
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_EXIT_THREAD
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUTEX_CMPXCHG if !MMU
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
+	select NO_BOOTMEM
 	select PERF_USE_VMALLOC
 	select VIRT_TO_BUS
 	help
@@ -209,7 +212,8 @@ config HOTPLUG_CPU
 
 config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	bool "Initialize Xtensa MMU inside the Linux kernel code"
-	default y
+	depends on !XTENSA_VARIANT_FSF && !XTENSA_VARIANT_DC232B
+	default y if XTENSA_VARIANT_DC233C || XTENSA_VARIANT_CUSTOM
 	help
 	  Earlier version initialized the MMU in the exception vector
 	  before jumping to _startup in head.S and had an advantage that
@@ -236,6 +240,71 @@ config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 
 	  If in doubt, say Y.
 
+config KSEG_PADDR
+	hex "Physical address of the KSEG mapping"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU
+	default 0x00000000
+	help
+	  This is the physical address where KSEG is mapped. Please refer to
+	  the chosen KSEG layout help for the required address alignment.
+	  Unpacked kernel image (including vectors) must be located completely
+	  within KSEG.
+	  Physical memory below this address is not available to linux.
+
+	  If unsure, leave the default value here.
+
+config KERNEL_LOAD_ADDRESS
+	hex "Kernel load address"
+	default 0x60003000 if !MMU
+	default 0x00003000 if MMU && INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	default 0xd0003000 if MMU && !INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  This is the address where the kernel is loaded.
+	  It is virtual address for MMUv2 configurations and physical address
+	  for all other configurations.
+
+	  If unsure, leave the default value here.
+
+config VECTORS_OFFSET
+	hex "Kernel vectors offset"
+	default 0x00003000
+	help
+	  This is the offset of the kernel image from the relocatable vectors
+	  base.
+
+	  If unsure, leave the default value here.
+
+choice
+	prompt "KSEG layout"
+	depends on MMU
+	default XTENSA_KSEG_MMU_V2
+
+config XTENSA_KSEG_MMU_V2
+	bool "MMUv2: 128MB cached + 128MB uncached"
+	help
+	  MMUv2 compatible kernel memory map: TLB way 5 maps 128MB starting
+	  at KSEG_PADDR to 0xd0000000 with cache and to 0xd8000000
+	  without cache.
+	  KSEG_PADDR must be aligned to 128MB.
+
+config XTENSA_KSEG_256M
+	bool "256MB cached + 256MB uncached"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  TLB way 6 maps 256MB starting at KSEG_PADDR to 0xb0000000
+	  with cache and to 0xc0000000 without cache.
+	  KSEG_PADDR must be aligned to 256MB.
+
+config XTENSA_KSEG_512M
+	bool "512MB cached + 512MB uncached"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  TLB way 6 maps 512MB starting at KSEG_PADDR to 0xa0000000
+	  with cache and to 0xc0000000 without cache.
+	  KSEG_PADDR must be aligned to 256MB.
+
+endchoice
+
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
@@ -331,7 +400,7 @@ config XTENSA_PLATFORM_XT2000
 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"
 	select ETHOC if ETHERNET
-	select PLATFORM_WANT_DEFAULT_MEM
+	select PLATFORM_WANT_DEFAULT_MEM if !MMU
 	select SERIAL_CONSOLE
 	select XTENSA_CALIBRATE_CCOUNT
 	help
@@ -369,6 +438,7 @@ config USE_OF
 	bool "Flattened Device Tree support"
 	select OF
 	select OF_EARLY_FLATTREE
+	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -439,16 +509,9 @@ config DEFAULT_MEM_START
 	default 0x00000000 if MMU
 	default 0x60000000 if !MMU
 	help
-	  This is a fallback start address of the default memory area, it is
-	  used when no physical memory size is passed through DTB or through
-	  boot parameter from bootloader.
-
-	  In noMMU configuration the following parameters are derived from it:
-	  - kernel load address;
-	  - kernel entry point address;
-	  - relocatable vectors base address;
-	  - uBoot load address;
-	  - TASK_SIZE.
+	  This is the base address of the default memory area.
+	  Default memory area has platform-specific meaning, it may be used
+	  for e.g. early cache initialization.
 
 	  If unsure, leave the default value here.
 
@@ -457,11 +520,9 @@ config DEFAULT_MEM_SIZE
 	depends on PLATFORM_WANT_DEFAULT_MEM
 	default 0x04000000
 	help
-	  This is a fallback size of the default memory area, it is used when
-	  no physical memory size is passed through DTB or through boot
-	  parameter from bootloader.
-
-	  It's also used for TASK_SIZE calculation in noMMU configuration.
+	  This is the size of the default memory area.
+	  Default memory area has platform-specific meaning, it may be used
+	  for e.g. early cache initialization.
 
 	  If unsure, leave the default value here.
 
diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S
index e54f2c9..a309930 100644
--- a/arch/xtensa/boot/boot-elf/boot.lds.S
+++ b/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -23,7 +23,7 @@ SECTIONS
 		*(.ResetVector.text)
 	}
 
-	.image KERNELOFFSET: AT (LOAD_MEMORY_ADDRESS)
+	.image KERNELOFFSET: AT (CONFIG_KERNEL_LOAD_ADDRESS)
 	{
 		_image_start = .;
 		*(image)
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
index e6bf313..b6aa853 100644
--- a/arch/xtensa/boot/boot-elf/bootstrap.S
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -35,7 +35,12 @@ _ResetVector:
 
 	.align 4
 RomInitAddr:
-	.word	LOAD_MEMORY_ADDRESS
+#if defined(CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) && \
+	XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+	.word	CONFIG_KERNEL_LOAD_ADDRESS
+#else
+	.word	KERNELOFFSET
+#endif
 RomBootParam:
 	.word _bootparam
 _bootparam:
diff --git a/arch/xtensa/boot/boot-uboot/Makefile b/arch/xtensa/boot/boot-uboot/Makefile
index 403fcf2..0f4c417 100644
--- a/arch/xtensa/boot/boot-uboot/Makefile
+++ b/arch/xtensa/boot/boot-uboot/Makefile
@@ -4,15 +4,7 @@
 # for more details.
 #
 
-ifdef CONFIG_MMU
-ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
-UIMAGE_LOADADDR = 0x00003000
-else
-UIMAGE_LOADADDR = 0xd0003000
-endif
-else
-UIMAGE_LOADADDR = $(shell printf "0x%x" $$(( ${CONFIG_DEFAULT_MEM_START} + 0x3000 )) )
-endif
+UIMAGE_LOADADDR = $(CONFIG_KERNEL_LOAD_ADDRESS)
 UIMAGE_COMPRESSION = gzip
 
 $(obj)/../uImage: vmlinux.bin.gz FORCE
diff --git a/arch/xtensa/boot/dts/csp.dts b/arch/xtensa/boot/dts/csp.dts
new file mode 100644
index 0000000..4082f26
--- /dev/null
+++ b/arch/xtensa/boot/dts/csp.dts
@@ -0,0 +1,54 @@
+/dts-v1/;
+
+/ {
+	compatible = "cdns,xtensa-xtfpga";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&pic>;
+
+	chosen {
+		bootargs = "earlycon=cdns,0xfd000000,115200 console=tty0 console=ttyPS0,115200 root=/dev/ram0 rw earlyprintk xilinx_uartps.rx_trigger_level=32 loglevel=8 nohz=off ignore_loglevel";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "cdns,xtensa-cpu";
+			reg = <0>;
+		};
+	};
+
+	pic: pic {
+		compatible = "cdns,xtensa-pic";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	clocks {
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf0000000 0x10000000>;
+
+		uart0: serial@0d000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			clocks = <&osc>, <&osc>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0x0d000000 0x1000>;
+			interrupts = <0 1>;
+		};
+	};
+};
diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
index cd45f9c..91616a9 100644
--- a/arch/xtensa/boot/dts/xtfpga.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -19,9 +19,7 @@
 		cpu@0 {
 			compatible = "cdns,xtensa-cpu";
 			reg = <0>;
-			/* Filled in by platform_setup from FPGA register
-			 * clock-frequency = <100000000>;
-			 */
+			clocks = <&osc>;
 		};
 	};
 
@@ -36,11 +34,6 @@
 	};
 
 	clocks {
-		osc: main-oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-		};
-
 		clk54: clk54 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -54,6 +47,12 @@
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf0000000 0x10000000>;
 
+		osc: main-oscillator {
+			#clock-cells = <0>;
+			compatible = "cdns,xtfpga-clock";
+			reg = <0x0d020004 0x4>;
+		};
+
 		serial0: serial@0d050020 {
 			device_type = "serial";
 			compatible = "ns16550a";
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index c4904db..8d16925 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -33,7 +33,7 @@ CONFIG_HIGHMEM=y
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="kc705"
 # CONFIG_COMPACTION is not set
diff --git a/arch/xtensa/configs/cadence_csp_defconfig b/arch/xtensa/configs/cadence_csp_defconfig
new file mode 100644
index 0000000..f2d3094
--- /dev/null
+++ b/arch/xtensa/configs/cadence_csp_defconfig
@@ -0,0 +1,122 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="$$KERNEL_INITRAMFS_SOURCE"
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="csp"
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HIGHMEM=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="csp"
+# CONFIG_COMPACTION is not set
+CONFIG_XTFPGA_LCD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_RCU_TRACE=y
+CONFIG_FUNCTION_TRACER=y
+# CONFIG_S32C1I_SELFTEST is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index 721df12..4bcc76b 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -1,204 +1,15 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Tue Mar  1 16:36:53 2005
-#
-# CONFIG_FRAME_POINTER is not set
-CONFIG_XTENSA=y
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EXPERT is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor type and features
-#
-CONFIG_XTENSA_ARCH_LINUX_BE=y
-# CONFIG_XTENSA_ARCH_LINUX_LE is not set
-# CONFIG_XTENSA_ARCH_LINUX_TEST is not set
-# CONFIG_XTENSA_ARCH_S5 is not set
-# CONFIG_XTENSA_CUSTOM is not set
-CONFIG_MMU=y
-# CONFIG_XTENSA_UNALIGNED_USER is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-
-#
-# Platform options
-#
-# CONFIG_XTENSA_PLATFORM_ISS is not set
 CONFIG_XTENSA_PLATFORM_XT2000=y
-CONFIG_XTENSA_CALIBRATE_CCOUNT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Exectuable file formats
-#
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
+CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
 CONFIG_BINFMT_MISC=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
@@ -209,47 +20,10 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
@@ -257,399 +31,24 @@ CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_XT2000_SONIC=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_FRAME_POINTER is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_DEBUG_KERNEL=y
diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig
index d9444f0..744adea 100644
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@@ -32,7 +32,7 @@ CONFIG_HIGHMEM=y
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="kc705"
 # CONFIG_COMPACTION is not set
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 44c6764..4bb5b76 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -1,758 +1,34 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc6
-# Tue Aug  3 00:10:54 2010
-#
-# CONFIG_FRAME_POINTER is not set
-CONFIG_ZONE_DMA=y
-CONFIG_XTENSA=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_HZ=100
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EXPERT=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_UNINLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_MMU=y
-# CONFIG_VARIANT_IRQ_SWITCH is not set
-
-#
-# Processor type and features
-#
-CONFIG_XTENSA_VARIANT_FSF=y
-# CONFIG_XTENSA_VARIANT_DC232B is not set
-# CONFIG_XTENSA_UNALIGNED_USER is not set
-# CONFIG_PREEMPT is not set
-CONFIG_XTENSA_CALIBRATE_CCOUNT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_XTENSA_ISS_NETWORK=y
-
-#
-# Bus options
-#
 # CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Platform options
-#
-CONFIG_XTENSA_PLATFORM_ISS=y
-# CONFIG_XTENSA_PLATFORM_XT2000 is not set
-# CONFIG_GENERIC_CALIBRATE_DELAY is not set
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target"
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-
-#
-# Executable file formats
-#
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
+CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_HAVE_IDE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_FRAME_POINTER is not set
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_CPU_STALL_DETECTOR=y
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_SAMPLES is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_LD_NO_RELAX=y
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
index 337d5ba..78c2529 100644
--- a/arch/xtensa/configs/nommu_kc705_defconfig
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -37,7 +37,7 @@ CONFIG_PREEMPT=y
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="kc705_nommu"
 CONFIG_DEFAULT_MEM_SIZE=0x10000000
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index 61f943c..14e3ca3 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -36,7 +36,7 @@ CONFIG_HOTPLUG_CPU=y
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
 CONFIG_USE_OF=y
 CONFIG_BUILTIN_DTB="lx200mx"
 # CONFIG_COMPACTION is not set
diff --git a/arch/xtensa/include/asm/asm-uaccess.h b/arch/xtensa/include/asm/asm-uaccess.h
new file mode 100644
index 0000000..a7a1100
--- /dev/null
+++ b/arch/xtensa/include/asm/asm-uaccess.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-xtensa/uaccess.h
+ *
+ * User space memory access functions
+ *
+ * These routines provide basic accessing functions to the user memory
+ * space for the kernel. This header file provides functions such as:
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2005 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_ASM_UACCESS_H
+#define _XTENSA_ASM_UACCESS_H
+
+#include <linux/errno.h>
+#include <asm/types.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#include <asm/current.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor.h>
+
+/*
+ * These assembly macros mirror the C macros in asm/uaccess.h.  They
+ * should always have identical functionality.  See
+ * arch/xtensa/kernel/sys.S for usage.
+ */
+
+#define KERNEL_DS	0
+#define USER_DS		1
+
+#define get_ds		(KERNEL_DS)
+
+/*
+ * get_fs reads current->thread.current_ds into a register.
+ * On Entry:
+ * 	<ad>	anything
+ * 	<sp>	stack
+ * On Exit:
+ * 	<ad>	contains current->thread.current_ds
+ */
+	.macro	get_fs	ad, sp
+	GET_CURRENT(\ad,\sp)
+#if THREAD_CURRENT_DS > 1020
+	addi	\ad, \ad, TASK_THREAD
+	l32i	\ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
+#else
+	l32i	\ad, \ad, THREAD_CURRENT_DS
+#endif
+	.endm
+
+/*
+ * set_fs sets current->thread.current_ds to some value.
+ * On Entry:
+ *	<at>	anything (temp register)
+ *	<av>	value to write
+ *	<sp>	stack
+ * On Exit:
+ *	<at>	destroyed (actually, current)
+ *	<av>	preserved, value to write
+ */
+	.macro	set_fs	at, av, sp
+	GET_CURRENT(\at,\sp)
+	s32i	\av, \at, THREAD_CURRENT_DS
+	.endm
+
+/*
+ * kernel_ok determines whether we should bypass addr/size checking.
+ * See the equivalent C-macro version below for clarity.
+ * On success, kernel_ok branches to a label indicated by parameter
+ * <success>.  This implies that the macro falls through to the next
+ * insruction on an error.
+ *
+ * Note that while this macro can be used independently, we designed
+ * in for optimal use in the access_ok macro below (i.e., we fall
+ * through on error).
+ *
+ * On Entry:
+ * 	<at>		anything (temp register)
+ * 	<success>	label to branch to on success; implies
+ * 			fall-through macro on error
+ * 	<sp>		stack pointer
+ * On Exit:
+ * 	<at>		destroyed (actually, current->thread.current_ds)
+ */
+
+#if ((KERNEL_DS != 0) || (USER_DS == 0))
+# error Assembly macro kernel_ok fails
+#endif
+	.macro	kernel_ok  at, sp, success
+	get_fs	\at, \sp
+	beqz	\at, \success
+	.endm
+
+/*
+ * user_ok determines whether the access to user-space memory is allowed.
+ * See the equivalent C-macro version below for clarity.
+ *
+ * On error, user_ok branches to a label indicated by parameter
+ * <error>.  This implies that the macro falls through to the next
+ * instruction on success.
+ *
+ * Note that while this macro can be used independently, we designed
+ * in for optimal use in the access_ok macro below (i.e., we fall
+ * through on success).
+ *
+ * On Entry:
+ * 	<aa>	register containing memory address
+ * 	<as>	register containing memory size
+ * 	<at>	temp register
+ * 	<error>	label to branch to on error; implies fall-through
+ * 		macro on success
+ * On Exit:
+ * 	<aa>	preserved
+ * 	<as>	preserved
+ * 	<at>	destroyed (actually, (TASK_SIZE + 1 - size))
+ */
+	.macro	user_ok	aa, as, at, error
+	movi	\at, __XTENSA_UL_CONST(TASK_SIZE)
+	bgeu	\as, \at, \error
+	sub	\at, \at, \as
+	bgeu	\aa, \at, \error
+	.endm
+
+/*
+ * access_ok determines whether a memory access is allowed.  See the
+ * equivalent C-macro version below for clarity.
+ *
+ * On error, access_ok branches to a label indicated by parameter
+ * <error>.  This implies that the macro falls through to the next
+ * instruction on success.
+ *
+ * Note that we assume success is the common case, and we optimize the
+ * branch fall-through case on success.
+ *
+ * On Entry:
+ * 	<aa>	register containing memory address
+ * 	<as>	register containing memory size
+ * 	<at>	temp register
+ * 	<sp>
+ * 	<error>	label to branch to on error; implies fall-through
+ * 		macro on success
+ * On Exit:
+ * 	<aa>	preserved
+ * 	<as>	preserved
+ * 	<at>	destroyed
+ */
+	.macro	access_ok  aa, as, at, sp, error
+	kernel_ok  \at, \sp, .Laccess_ok_\@
+	user_ok    \aa, \as, \at, \error
+.Laccess_ok_\@:
+	.endm
+
+#endif	/* _XTENSA_ASM_UACCESS_H */
diff --git a/arch/xtensa/include/asm/bitops.h b/arch/xtensa/include/asm/bitops.h
index 3f44fa2..d349018 100644
--- a/arch/xtensa/include/asm/bitops.h
+++ b/arch/xtensa/include/asm/bitops.h
@@ -48,7 +48,7 @@ static inline int ffz(unsigned long x)
  * __ffs: Find first bit set in word. Return 0 for bit 0
  */
 
-static inline int __ffs(unsigned long x)
+static inline unsigned long __ffs(unsigned long x)
 {
 	return 31 - __cntlz(x & -x);
 }
diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h
index e0f9e11..2041abb 100644
--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -69,26 +69,23 @@
 	.endm
 
 
-#if XCHAL_DCACHE_LINE_LOCKABLE
-
 	.macro	___unlock_dcache_all ar at
 
-#if XCHAL_DCACHE_SIZE
+#if XCHAL_DCACHE_LINE_LOCKABLE && XCHAL_DCACHE_SIZE
 	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
 #endif
 
 	.endm
 
-#endif
-
-#if XCHAL_ICACHE_LINE_LOCKABLE
 
 	.macro	___unlock_icache_all ar at
 
+#if XCHAL_ICACHE_LINE_LOCKABLE && XCHAL_ICACHE_SIZE
 	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH
+#endif
 
 	.endm
-#endif
+
 
 	.macro	___flush_invalidate_dcache_all ar at
 
diff --git a/arch/xtensa/include/asm/fixmap.h b/arch/xtensa/include/asm/fixmap.h
index 62b507d..0d30403 100644
--- a/arch/xtensa/include/asm/fixmap.h
+++ b/arch/xtensa/include/asm/fixmap.h
@@ -59,6 +59,11 @@ enum fixed_addresses {
  */
 static __always_inline unsigned long fix_to_virt(const unsigned int idx)
 {
+	/* Check if this memory layout is broken because fixmap overlaps page
+	 * table.
+	 */
+	BUILD_BUG_ON(FIXADDR_START <
+		     XCHAL_PAGE_TABLE_VADDR + XCHAL_PAGE_TABLE_SIZE);
 	BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
 	return __fix_to_virt(idx);
 }
diff --git a/arch/xtensa/include/asm/highmem.h b/arch/xtensa/include/asm/highmem.h
index 01cef6b..6e070db 100644
--- a/arch/xtensa/include/asm/highmem.h
+++ b/arch/xtensa/include/asm/highmem.h
@@ -68,6 +68,11 @@ void kunmap_high(struct page *page);
 
 static inline void *kmap(struct page *page)
 {
+	/* Check if this memory layout is broken because PKMAP overlaps
+	 * page table.
+	 */
+	BUILD_BUG_ON(PKMAP_BASE <
+		     XCHAL_PAGE_TABLE_VADDR + XCHAL_PAGE_TABLE_SIZE);
 	BUG_ON(in_interrupt());
 	if (!PageHighMem(page))
 		return page_address(page);
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 7a1e075..42410f2 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -77,13 +77,16 @@
 
 	.align	4
 1:	movi	a2, 0x10000000
-	movi	a3, 0x18000000
-	add	a2, a2, a0
-9:	bgeu	a2, a3, 9b	/* PC is out of the expected range */
+
+#if CONFIG_KERNEL_LOAD_ADDRESS < 0x40000000ul
+#define TEMP_MAPPING_VADDR 0x40000000
+#else
+#define TEMP_MAPPING_VADDR 0x00000000
+#endif
 
 	/* Step 1: invalidate mapping at 0x40000000..0x5FFFFFFF. */
 
-	movi	a2, 0x40000000 | XCHAL_SPANNING_WAY
+	movi	a2, TEMP_MAPPING_VADDR | XCHAL_SPANNING_WAY
 	idtlb	a2
 	iitlb	a2
 	isync
@@ -95,14 +98,14 @@
 	srli	a3, a0, 27
 	slli	a3, a3, 27
 	addi	a3, a3, CA_BYPASS
-	addi	a7, a2, -1
+	addi	a7, a2, 5 - XCHAL_SPANNING_WAY
 	wdtlb	a3, a7
 	witlb	a3, a7
 	isync
 
 	slli	a4, a0, 5
 	srli	a4, a4, 5
-	addi	a5, a2, -6
+	addi	a5, a2, -XCHAL_SPANNING_WAY
 	add	a4, a4, a5
 	jx	a4
 
@@ -116,35 +119,48 @@
 	add	a5, a5, a4
 	bne	a5, a2, 3b
 
-	/* Step 4: Setup MMU with the old V2 mappings. */
+	/* Step 4: Setup MMU with the requested static mappings. */
+
 	movi	a6, 0x01000000
 	wsr	a6, ITLBCFG
 	wsr	a6, DTLBCFG
 	isync
 
-	movi	a5, 0xd0000005
-	movi	a4, CA_WRITEBACK
+	movi	a5, XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_TLB_WAY
+	movi	a4, XCHAL_KSEG_PADDR + CA_WRITEBACK
 	wdtlb	a4, a5
 	witlb	a4, a5
 
-	movi	a5, 0xd8000005
-	movi	a4, CA_BYPASS
+	movi	a5, XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_TLB_WAY
+	movi	a4, XCHAL_KSEG_PADDR + CA_BYPASS
 	wdtlb	a4, a5
 	witlb	a4, a5
 
-	movi	a5, XCHAL_KIO_CACHED_VADDR + 6
+#ifdef CONFIG_XTENSA_KSEG_512M
+	movi	a5, XCHAL_KSEG_CACHED_VADDR + 0x10000000 + XCHAL_KSEG_TLB_WAY
+	movi	a4, XCHAL_KSEG_PADDR + 0x10000000 + CA_WRITEBACK
+	wdtlb	a4, a5
+	witlb	a4, a5
+
+	movi	a5, XCHAL_KSEG_BYPASS_VADDR + 0x10000000 + XCHAL_KSEG_TLB_WAY
+	movi	a4, XCHAL_KSEG_PADDR + 0x10000000 + CA_BYPASS
+	wdtlb	a4, a5
+	witlb	a4, a5
+#endif
+
+	movi	a5, XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_TLB_WAY
 	movi	a4, XCHAL_KIO_DEFAULT_PADDR + CA_WRITEBACK
 	wdtlb	a4, a5
 	witlb	a4, a5
 
-	movi	a5, XCHAL_KIO_BYPASS_VADDR + 6
+	movi	a5, XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_TLB_WAY
 	movi	a4, XCHAL_KIO_DEFAULT_PADDR + CA_BYPASS
 	wdtlb	a4, a5
 	witlb	a4, a5
 
 	isync
 
-	/* Jump to self, using MMU v2 mappings. */
+	/* Jump to self, using final mappings. */
 	movi	a4, 1f
 	jx	a4
 
diff --git a/arch/xtensa/include/asm/kmem_layout.h b/arch/xtensa/include/asm/kmem_layout.h
new file mode 100644
index 0000000..561f872
--- /dev/null
+++ b/arch/xtensa/include/asm/kmem_layout.h
@@ -0,0 +1,74 @@
+/*
+ * Kernel virtual memory layout definitions.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of
+ * this archive for more details.
+ *
+ * Copyright (C) 2016 Cadence Design Systems Inc.
+ */
+
+#ifndef _XTENSA_KMEM_LAYOUT_H
+#define _XTENSA_KMEM_LAYOUT_H
+
+#include <asm/types.h>
+
+#ifdef CONFIG_MMU
+
+/*
+ * Fixed TLB translations in the processor.
+ */
+
+#define XCHAL_PAGE_TABLE_VADDR	__XTENSA_UL_CONST(0x80000000)
+#define XCHAL_PAGE_TABLE_SIZE	__XTENSA_UL_CONST(0x00400000)
+
+#if defined(CONFIG_XTENSA_KSEG_MMU_V2)
+
+#define XCHAL_KSEG_CACHED_VADDR	__XTENSA_UL_CONST(0xd0000000)
+#define XCHAL_KSEG_BYPASS_VADDR	__XTENSA_UL_CONST(0xd8000000)
+#define XCHAL_KSEG_SIZE		__XTENSA_UL_CONST(0x08000000)
+#define XCHAL_KSEG_ALIGNMENT	__XTENSA_UL_CONST(0x08000000)
+#define XCHAL_KSEG_TLB_WAY	5
+#define XCHAL_KIO_TLB_WAY	6
+
+#elif defined(CONFIG_XTENSA_KSEG_256M)
+
+#define XCHAL_KSEG_CACHED_VADDR	__XTENSA_UL_CONST(0xb0000000)
+#define XCHAL_KSEG_BYPASS_VADDR	__XTENSA_UL_CONST(0xc0000000)
+#define XCHAL_KSEG_SIZE		__XTENSA_UL_CONST(0x10000000)
+#define XCHAL_KSEG_ALIGNMENT	__XTENSA_UL_CONST(0x10000000)
+#define XCHAL_KSEG_TLB_WAY	6
+#define XCHAL_KIO_TLB_WAY	6
+
+#elif defined(CONFIG_XTENSA_KSEG_512M)
+
+#define XCHAL_KSEG_CACHED_VADDR	__XTENSA_UL_CONST(0xa0000000)
+#define XCHAL_KSEG_BYPASS_VADDR	__XTENSA_UL_CONST(0xc0000000)
+#define XCHAL_KSEG_SIZE		__XTENSA_UL_CONST(0x20000000)
+#define XCHAL_KSEG_ALIGNMENT	__XTENSA_UL_CONST(0x10000000)
+#define XCHAL_KSEG_TLB_WAY	6
+#define XCHAL_KIO_TLB_WAY	6
+
+#else
+#error Unsupported KSEG configuration
+#endif
+
+#ifdef CONFIG_KSEG_PADDR
+#define XCHAL_KSEG_PADDR        __XTENSA_UL_CONST(CONFIG_KSEG_PADDR)
+#else
+#define XCHAL_KSEG_PADDR	__XTENSA_UL_CONST(0x00000000)
+#endif
+
+#if XCHAL_KSEG_PADDR & (XCHAL_KSEG_ALIGNMENT - 1)
+#error XCHAL_KSEG_PADDR is not properly aligned to XCHAL_KSEG_ALIGNMENT
+#endif
+
+#else
+
+#define XCHAL_KSEG_CACHED_VADDR	__XTENSA_UL_CONST(0xd0000000)
+#define XCHAL_KSEG_BYPASS_VADDR	__XTENSA_UL_CONST(0xd8000000)
+#define XCHAL_KSEG_SIZE		__XTENSA_UL_CONST(0x08000000)
+
+#endif
+
+#endif
diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h
index ad38500..976b1d7 100644
--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -15,15 +15,7 @@
 #include <asm/types.h>
 #include <asm/cache.h>
 #include <platform/hardware.h>
-
-/*
- * Fixed TLB translations in the processor.
- */
-
-#define XCHAL_KSEG_CACHED_VADDR __XTENSA_UL_CONST(0xd0000000)
-#define XCHAL_KSEG_BYPASS_VADDR __XTENSA_UL_CONST(0xd8000000)
-#define XCHAL_KSEG_PADDR        __XTENSA_UL_CONST(0x00000000)
-#define XCHAL_KSEG_SIZE         __XTENSA_UL_CONST(0x08000000)
+#include <asm/kmem_layout.h>
 
 /*
  * PAGE_SHIFT determines the page size
@@ -35,10 +27,13 @@
 
 #ifdef CONFIG_MMU
 #define PAGE_OFFSET	XCHAL_KSEG_CACHED_VADDR
-#define MAX_MEM_PFN	XCHAL_KSEG_SIZE
+#define PHYS_OFFSET	XCHAL_KSEG_PADDR
+#define MAX_LOW_PFN	(PHYS_PFN(XCHAL_KSEG_PADDR) + \
+			 PHYS_PFN(XCHAL_KSEG_SIZE))
 #else
-#define PAGE_OFFSET	__XTENSA_UL_CONST(0)
-#define MAX_MEM_PFN	(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#define PAGE_OFFSET	PLATFORM_DEFAULT_MEM_START
+#define PHYS_OFFSET	PLATFORM_DEFAULT_MEM_START
+#define MAX_LOW_PFN	PHYS_PFN(0xfffffffful)
 #endif
 
 #define PGTABLE_START	0x80000000
@@ -167,10 +162,12 @@ void copy_user_highpage(struct page *to, struct page *from,
  * addresses.
  */
 
-#define ARCH_PFN_OFFSET		(PLATFORM_DEFAULT_MEM_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		(PHYS_OFFSET >> PAGE_SHIFT)
 
-#define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
-#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+#define __pa(x)	\
+	((unsigned long) (x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __va(x)	\
+	((void *)((unsigned long) (x) - PHYS_OFFSET + PAGE_OFFSET))
 #define pfn_valid(pfn) \
 	((pfn) >= ARCH_PFN_OFFSET && ((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
 
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index fb02fdc..8aa0e0d 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -13,6 +13,7 @@
 
 #include <asm-generic/pgtable-nopmd.h>
 #include <asm/page.h>
+#include <asm/kmem_layout.h>
 
 /*
  * We only use two ring levels, user and kernel space.
@@ -68,9 +69,9 @@
  * Virtual memory area. We keep a distance to other memory regions to be
  * on the safe side. We also use this area for cache aliasing.
  */
-#define VMALLOC_START		0xC0000000
-#define VMALLOC_END		0xC7FEFFFF
-#define TLBTEMP_BASE_1		0xC7FF0000
+#define VMALLOC_START		(XCHAL_KSEG_CACHED_VADDR - 0x10000000)
+#define VMALLOC_END		(VMALLOC_START + 0x07FEFFFF)
+#define TLBTEMP_BASE_1		(VMALLOC_END + 1)
 #define TLBTEMP_BASE_2		(TLBTEMP_BASE_1 + DCACHE_WAY_SIZE)
 #if 2 * DCACHE_WAY_SIZE > ICACHE_WAY_SIZE
 #define TLBTEMP_SIZE		(2 * DCACHE_WAY_SIZE)
diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h
index 32e98f2..f8fbef6 100644
--- a/arch/xtensa/include/asm/platform.h
+++ b/arch/xtensa/include/asm/platform.h
@@ -69,4 +69,10 @@ extern int platform_pcibios_fixup (void);
  */
 extern void platform_calibrate_ccount (void);
 
+/*
+ * Flush and reset the mmu, simulate a processor reset, and
+ * jump to the reset vector.
+ */
+void cpu_reset(void) __attribute__((noreturn));
+
 #endif	/* _XTENSA_PLATFORM_H */
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index d2e40d3..b42d68b 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -37,7 +37,7 @@
 #ifdef CONFIG_MMU
 #define TASK_SIZE	__XTENSA_UL_CONST(0x40000000)
 #else
-#define TASK_SIZE	(PLATFORM_DEFAULT_MEM_START + PLATFORM_DEFAULT_MEM_SIZE)
+#define TASK_SIZE	__XTENSA_UL_CONST(0xffffffff)
 #endif
 
 #define STACK_TOP	TASK_SIZE
diff --git a/arch/xtensa/include/asm/sysmem.h b/arch/xtensa/include/asm/sysmem.h
index c015c5c..552cdfd 100644
--- a/arch/xtensa/include/asm/sysmem.h
+++ b/arch/xtensa/include/asm/sysmem.h
@@ -11,27 +11,8 @@
 #ifndef _XTENSA_SYSMEM_H
 #define _XTENSA_SYSMEM_H
 
-#define SYSMEM_BANKS_MAX 31
+#include <linux/memblock.h>
 
-struct meminfo {
-	unsigned long start;
-	unsigned long end;
-};
-
-/*
- * Bank array is sorted by .start.
- * Banks don't overlap and there's at least one page gap
- * between adjacent bank entries.
- */
-struct sysmem_info {
-	int nr_banks;
-	struct meminfo bank[SYSMEM_BANKS_MAX];
-};
-
-extern struct sysmem_info sysmem;
-
-int add_sysmem_bank(unsigned long start, unsigned long end);
-int mem_reserve(unsigned long, unsigned long, int);
 void bootmem_init(void);
 void zones_init(void);
 
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index 147b26e..848a3d7 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -17,153 +17,12 @@
 #define _XTENSA_UACCESS_H
 
 #include <linux/errno.h>
-#ifndef __ASSEMBLY__
 #include <linux/prefetch.h>
-#endif
 #include <asm/types.h>
 
 #define VERIFY_READ    0
 #define VERIFY_WRITE   1
 
-#ifdef __ASSEMBLY__
-
-#include <asm/current.h>
-#include <asm/asm-offsets.h>
-#include <asm/processor.h>
-
-/*
- * These assembly macros mirror the C macros that follow below.  They
- * should always have identical functionality.  See
- * arch/xtensa/kernel/sys.S for usage.
- */
-
-#define KERNEL_DS	0
-#define USER_DS		1
-
-#define get_ds		(KERNEL_DS)
-
-/*
- * get_fs reads current->thread.current_ds into a register.
- * On Entry:
- * 	<ad>	anything
- * 	<sp>	stack
- * On Exit:
- * 	<ad>	contains current->thread.current_ds
- */
-	.macro	get_fs	ad, sp
-	GET_CURRENT(\ad,\sp)
-#if THREAD_CURRENT_DS > 1020
-	addi	\ad, \ad, TASK_THREAD
-	l32i	\ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
-#else
-	l32i	\ad, \ad, THREAD_CURRENT_DS
-#endif
-	.endm
-
-/*
- * set_fs sets current->thread.current_ds to some value.
- * On Entry:
- *	<at>	anything (temp register)
- *	<av>	value to write
- *	<sp>	stack
- * On Exit:
- *	<at>	destroyed (actually, current)
- *	<av>	preserved, value to write
- */
-	.macro	set_fs	at, av, sp
-	GET_CURRENT(\at,\sp)
-	s32i	\av, \at, THREAD_CURRENT_DS
-	.endm
-
-/*
- * kernel_ok determines whether we should bypass addr/size checking.
- * See the equivalent C-macro version below for clarity.
- * On success, kernel_ok branches to a label indicated by parameter
- * <success>.  This implies that the macro falls through to the next
- * insruction on an error.
- *
- * Note that while this macro can be used independently, we designed
- * in for optimal use in the access_ok macro below (i.e., we fall
- * through on error).
- *
- * On Entry:
- * 	<at>		anything (temp register)
- * 	<success>	label to branch to on success; implies
- * 			fall-through macro on error
- * 	<sp>		stack pointer
- * On Exit:
- * 	<at>		destroyed (actually, current->thread.current_ds)
- */
-
-#if ((KERNEL_DS != 0) || (USER_DS == 0))
-# error Assembly macro kernel_ok fails
-#endif
-	.macro	kernel_ok  at, sp, success
-	get_fs	\at, \sp
-	beqz	\at, \success
-	.endm
-
-/*
- * user_ok determines whether the access to user-space memory is allowed.
- * See the equivalent C-macro version below for clarity.
- *
- * On error, user_ok branches to a label indicated by parameter
- * <error>.  This implies that the macro falls through to the next
- * instruction on success.
- *
- * Note that while this macro can be used independently, we designed
- * in for optimal use in the access_ok macro below (i.e., we fall
- * through on success).
- *
- * On Entry:
- * 	<aa>	register containing memory address
- * 	<as>	register containing memory size
- * 	<at>	temp register
- * 	<error>	label to branch to on error; implies fall-through
- * 		macro on success
- * On Exit:
- * 	<aa>	preserved
- * 	<as>	preserved
- * 	<at>	destroyed (actually, (TASK_SIZE + 1 - size))
- */
-	.macro	user_ok	aa, as, at, error
-	movi	\at, __XTENSA_UL_CONST(TASK_SIZE)
-	bgeu	\as, \at, \error
-	sub	\at, \at, \as
-	bgeu	\aa, \at, \error
-	.endm
-
-/*
- * access_ok determines whether a memory access is allowed.  See the
- * equivalent C-macro version below for clarity.
- *
- * On error, access_ok branches to a label indicated by parameter
- * <error>.  This implies that the macro falls through to the next
- * instruction on success.
- *
- * Note that we assume success is the common case, and we optimize the
- * branch fall-through case on success.
- *
- * On Entry:
- * 	<aa>	register containing memory address
- * 	<as>	register containing memory size
- * 	<at>	temp register
- * 	<sp>
- * 	<error>	label to branch to on error; implies fall-through
- * 		macro on success
- * On Exit:
- * 	<aa>	preserved
- * 	<as>	preserved
- * 	<at>	destroyed
- */
-	.macro	access_ok  aa, as, at, sp, error
-	kernel_ok  \at, \sp, .Laccess_ok_\@
-	user_ok    \aa, \as, \at, \error
-.Laccess_ok_\@:
-	.endm
-
-#else /* __ASSEMBLY__ not defined */
-
 #include <linux/sched.h>
 
 /*
@@ -495,16 +354,4 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
-/* Returns 0 if exception not found and fixup.unit otherwise.  */
-
-extern unsigned long search_exception_table(unsigned long addr);
-extern void sort_exception_table(void);
-
-/* Returns the new pc */
-#define fixup_exception(map_reg, fixup_unit, pc)                \
-({                                                              \
-	fixup_unit;                                             \
-})
-
-#endif	/* __ASSEMBLY__ */
 #endif	/* _XTENSA_UACCESS_H */
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
index 288c776..77d41cc 100644
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -20,6 +20,7 @@
 
 #include <variant/core.h>
 #include <platform/hardware.h>
+#include <asm/kmem_layout.h>
 
 #if XCHAL_HAVE_PTP_MMU
 #define XCHAL_KIO_CACHED_VADDR		0xe0000000
@@ -47,61 +48,42 @@ static inline unsigned long xtensa_get_kio_paddr(void)
 
 #if defined(CONFIG_MMU)
 
-/* Will Become VECBASE */
-#define VIRTUAL_MEMORY_ADDRESS		0xD0000000
-
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
 /* Image Virtual Start Address */
-#define KERNELOFFSET			0xD0003000
-
-#if defined(XCHAL_HAVE_PTP_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
-  /* MMU v3  - XCHAL_HAVE_PTP_MMU  == 1 */
-  #define LOAD_MEMORY_ADDRESS		0x00003000
+#define KERNELOFFSET			(XCHAL_KSEG_CACHED_VADDR + \
+					 CONFIG_KERNEL_LOAD_ADDRESS - \
+					 XCHAL_KSEG_PADDR)
 #else
-  /* MMU V2 -  XCHAL_HAVE_PTP_MMU  == 0 */
-  #define LOAD_MEMORY_ADDRESS		0xD0003000
+#define KERNELOFFSET			CONFIG_KERNEL_LOAD_ADDRESS
 #endif
 
-#define RESET_VECTOR1_VADDR		(VIRTUAL_MEMORY_ADDRESS + \
-					 XCHAL_RESET_VECTOR1_PADDR)
-
 #else /* !defined(CONFIG_MMU) */
   /* MMU Not being used - Virtual == Physical */
 
-  /* VECBASE */
-  #define VIRTUAL_MEMORY_ADDRESS	(PLATFORM_DEFAULT_MEM_START + 0x2000)
+/* Location of the start of the kernel text, _start */
+#define KERNELOFFSET			CONFIG_KERNEL_LOAD_ADDRESS
 
-  /* Location of the start of the kernel text, _start */
-  #define KERNELOFFSET			(PLATFORM_DEFAULT_MEM_START + 0x3000)
-
-  /* Loaded just above possibly live vectors */
-  #define LOAD_MEMORY_ADDRESS		(PLATFORM_DEFAULT_MEM_START + 0x3000)
-
-#define RESET_VECTOR1_VADDR		(XCHAL_RESET_VECTOR1_VADDR)
 
 #endif /* CONFIG_MMU */
 
-#define XC_VADDR(offset)		(VIRTUAL_MEMORY_ADDRESS  + offset)
-
-/* Used to set VECBASE register */
-#define VECBASE_RESET_VADDR		VIRTUAL_MEMORY_ADDRESS
+#define RESET_VECTOR1_VADDR		(XCHAL_RESET_VECTOR1_VADDR)
+#define VECBASE_VADDR			(KERNELOFFSET - CONFIG_VECTORS_OFFSET)
 
 #if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE
 
-#define USER_VECTOR_VADDR		XC_VADDR(XCHAL_USER_VECOFS)
-#define KERNEL_VECTOR_VADDR		XC_VADDR(XCHAL_KERNEL_VECOFS)
-#define DOUBLEEXC_VECTOR_VADDR		XC_VADDR(XCHAL_DOUBLEEXC_VECOFS)
-#define WINDOW_VECTORS_VADDR		XC_VADDR(XCHAL_WINDOW_OF4_VECOFS)
-#define INTLEVEL2_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL2_VECOFS)
-#define INTLEVEL3_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL3_VECOFS)
-#define INTLEVEL4_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL4_VECOFS)
-#define INTLEVEL5_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL5_VECOFS)
-#define INTLEVEL6_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL6_VECOFS)
-
-#define DEBUG_VECTOR_VADDR		XC_VADDR(XCHAL_DEBUG_VECOFS)
+#define VECTOR_VADDR(offset)		(VECBASE_VADDR + offset)
 
-#define NMI_VECTOR_VADDR		XC_VADDR(XCHAL_NMI_VECOFS)
-
-#define INTLEVEL7_VECTOR_VADDR		XC_VADDR(XCHAL_INTLEVEL7_VECOFS)
+#define USER_VECTOR_VADDR		VECTOR_VADDR(XCHAL_USER_VECOFS)
+#define KERNEL_VECTOR_VADDR		VECTOR_VADDR(XCHAL_KERNEL_VECOFS)
+#define DOUBLEEXC_VECTOR_VADDR		VECTOR_VADDR(XCHAL_DOUBLEEXC_VECOFS)
+#define WINDOW_VECTORS_VADDR		VECTOR_VADDR(XCHAL_WINDOW_OF4_VECOFS)
+#define INTLEVEL2_VECTOR_VADDR		VECTOR_VADDR(XCHAL_INTLEVEL2_VECOFS)
+#define INTLEVEL3_VECTOR_VADDR		VECTOR_VADDR(XCHAL_INTLEVEL3_VECOFS)
+#define INTLEVEL4_VECTOR_VADDR		VECTOR_VADDR(XCHAL_INTLEVEL4_VECOFS)
+#define INTLEVEL5_VECTOR_VADDR		VECTOR_VADDR(XCHAL_INTLEVEL5_VECOFS)
+#define INTLEVEL6_VECTOR_VADDR		VECTOR_VADDR(XCHAL_INTLEVEL6_VECOFS)
+#define INTLEVEL7_VECTOR_VADDR		VECTOR_VADDR(XCHAL_INTLEVEL7_VECOFS)
+#define DEBUG_VECTOR_VADDR		VECTOR_VADDR(XCHAL_DEBUG_VECOFS)
 
 /*
  * These XCHAL_* #defines from varian/core.h
@@ -109,7 +91,6 @@ static inline unsigned long xtensa_get_kio_paddr(void)
  * constants are defined above and should be used.
  */
 #undef  XCHAL_VECBASE_RESET_VADDR
-#undef  XCHAL_RESET_VECTOR0_VADDR
 #undef  XCHAL_USER_VECTOR_VADDR
 #undef  XCHAL_KERNEL_VECTOR_VADDR
 #undef  XCHAL_DOUBLEEXC_VECTOR_VADDR
@@ -119,9 +100,8 @@ static inline unsigned long xtensa_get_kio_paddr(void)
 #undef  XCHAL_INTLEVEL4_VECTOR_VADDR
 #undef  XCHAL_INTLEVEL5_VECTOR_VADDR
 #undef  XCHAL_INTLEVEL6_VECTOR_VADDR
-#undef  XCHAL_DEBUG_VECTOR_VADDR
-#undef  XCHAL_NMI_VECTOR_VADDR
 #undef  XCHAL_INTLEVEL7_VECTOR_VADDR
+#undef  XCHAL_DEBUG_VECTOR_VADDR
 
 #else
 
@@ -134,6 +114,7 @@ static inline unsigned long xtensa_get_kio_paddr(void)
 #define INTLEVEL4_VECTOR_VADDR		XCHAL_INTLEVEL4_VECTOR_VADDR
 #define INTLEVEL5_VECTOR_VADDR		XCHAL_INTLEVEL5_VECTOR_VADDR
 #define INTLEVEL6_VECTOR_VADDR		XCHAL_INTLEVEL6_VECTOR_VADDR
+#define INTLEVEL7_VECTOR_VADDR		XCHAL_INTLEVEL6_VECTOR_VADDR
 #define DEBUG_VECTOR_VADDR		XCHAL_DEBUG_VECTOR_VADDR
 
 #endif
diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h
index 9e079d4..24365b3 100644
--- a/arch/xtensa/include/uapi/asm/mman.h
+++ b/arch/xtensa/include/uapi/asm/mman.h
@@ -117,4 +117,9 @@
 #define MAP_HUGE_SHIFT	26
 #define MAP_HUGE_MASK	0x3f
 
+#define PKEY_DISABLE_ACCESS	0x1
+#define PKEY_DISABLE_WRITE	0x2
+#define PKEY_ACCESS_MASK	(PKEY_DISABLE_ACCESS |\
+				 PKEY_DISABLE_WRITE)
+
 #endif /* _XTENSA_MMAN_H */
diff --git a/arch/xtensa/include/uapi/asm/types.h b/arch/xtensa/include/uapi/asm/types.h
index 87ec7ae..2efc921 100644
--- a/arch/xtensa/include/uapi/asm/types.h
+++ b/arch/xtensa/include/uapi/asm/types.h
@@ -18,7 +18,8 @@
 # define __XTENSA_UL_CONST(x)	x
 #else
 # define __XTENSA_UL(x)		((unsigned long)(x))
-# define __XTENSA_UL_CONST(x)	x##UL
+# define ___XTENSA_UL_CONST(x)	x##UL
+# define __XTENSA_UL_CONST(x)	___XTENSA_UL_CONST(x)
 #endif
 
 #ifndef __ASSEMBLY__
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index b95c305..de9b14b 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -754,7 +754,20 @@ __SYSCALL(340, sys_bpf, 3)
 #define __NR_execveat				341
 __SYSCALL(341, sys_execveat, 5)
 
-#define __NR_syscall_count			342
+#define __NR_userfaultfd			342
+__SYSCALL(342, sys_userfaultfd, 1)
+#define __NR_membarrier				343
+__SYSCALL(343, sys_membarrier, 2)
+#define __NR_mlock2				344
+__SYSCALL(344, sys_mlock2, 3)
+#define __NR_copy_file_range			345
+__SYSCALL(345, sys_copy_file_range, 6)
+#define __NR_preadv2				346
+__SYSCALL(346, sys_preadv2, 6)
+#define __NR_pwritev2				347
+__SYSCALL(347, sys_pwritev2, 6)
+
+#define __NR_syscall_count			348
 
 /*
  * sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S
index a482df5..6911e38 100644
--- a/arch/xtensa/kernel/coprocessor.S
+++ b/arch/xtensa/kernel/coprocessor.S
@@ -17,7 +17,7 @@
 #include <asm/processor.h>
 #include <asm/coprocessor.h>
 #include <asm/thread_info.h>
-#include <asm/uaccess.h>
+#include <asm/asm-uaccess.h>
 #include <asm/unistd.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index fe8f7e7..f5ef3cc 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -17,7 +17,7 @@
 #include <asm/processor.h>
 #include <asm/coprocessor.h>
 #include <asm/thread_info.h>
-#include <asm/uaccess.h>
+#include <asm/asm-uaccess.h>
 #include <asm/unistd.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
@@ -1632,10 +1632,11 @@ ENTRY(fast_second_level_miss)
 	 * The messy computation for 'pteval' above really simplifies
 	 * into the following:
 	 *
-	 * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY
+	 * pteval = ((pmdval - PAGE_OFFSET + PHYS_OFFSET) & PAGE_MASK)
+	 *                 | PAGE_DIRECTORY
 	 */
 
-	movi	a1, (-PAGE_OFFSET) & 0xffffffff
+	movi	a1, (PHYS_OFFSET - PAGE_OFFSET) & 0xffffffff
 	add	a0, a0, a1		# pmdval - PAGE_OFFSET
 	extui	a1, a0, 0, PAGE_SHIFT	# ... & PAGE_MASK
 	xor	a0, a0, a1
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index bc4f4bf..23ce62e 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -113,7 +113,7 @@ ENTRY(_startup)
 	movi	a0, 0
 
 #if XCHAL_HAVE_VECBASE
-	movi    a2, VECBASE_RESET_VADDR
+	movi    a2, VECBASE_VADDR
 	wsr	a2, vecbase
 #endif
 
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 143251e..88a044a 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -7,6 +7,7 @@
  *
  * Copyright (C) 1995  Linus Torvalds
  * Copyright (C) 2001 - 2005  Tensilica Inc.
+ * Copyright (C) 2014 - 2016  Cadence Design Systems Inc.
  *
  * Chris Zankel	<chris@zankel.net>
  * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
@@ -22,7 +23,6 @@
 #include <linux/bootmem.h>
 #include <linux/kernel.h>
 #include <linux/percpu.h>
-#include <linux/clk-provider.h>
 #include <linux/cpu.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
@@ -114,7 +114,7 @@ static int __init parse_tag_mem(const bp_tag_t *tag)
 	if (mi->type != MEMORY_TYPE_CONVENTIONAL)
 		return -1;
 
-	return add_sysmem_bank(mi->start, mi->end);
+	return memblock_add(mi->start, mi->end - mi->start);
 }
 
 __tagtable(BP_TAG_MEMORY, parse_tag_mem);
@@ -188,7 +188,6 @@ static int __init parse_bootparam(const bp_tag_t* tag)
 }
 
 #ifdef CONFIG_OF
-bool __initdata dt_memory_scan = false;
 
 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
@@ -228,11 +227,8 @@ static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	if (!dt_memory_scan)
-		return;
-
 	size &= PAGE_MASK;
-	add_sysmem_bank(base, base + size);
+	memblock_add(base, size);
 }
 
 void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
@@ -242,9 +238,6 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 
 void __init early_init_devtree(void *params)
 {
-	if (sysmem.nr_banks == 0)
-		dt_memory_scan = true;
-
 	early_init_dt_scan(params);
 	of_scan_flat_dt(xtensa_dt_io_area, NULL);
 
@@ -252,14 +245,6 @@ void __init early_init_devtree(void *params)
 		strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 }
 
-static int __init xtensa_device_probe(void)
-{
-	of_clk_init(NULL);
-	return 0;
-}
-
-device_initcall(xtensa_device_probe);
-
 #endif /* CONFIG_OF */
 
 /*
@@ -277,12 +262,6 @@ void __init init_arch(bp_tag_t *bp_start)
 	early_init_devtree(dtb_start);
 #endif
 
-	if (sysmem.nr_banks == 0) {
-		add_sysmem_bank(PLATFORM_DEFAULT_MEM_START,
-				PLATFORM_DEFAULT_MEM_START +
-				PLATFORM_DEFAULT_MEM_SIZE);
-	}
-
 #ifdef CONFIG_CMDLINE_BOOL
 	if (!command_line[0])
 		strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
@@ -452,6 +431,10 @@ static int __init check_s32c1i(void)
 early_initcall(check_s32c1i);
 #endif /* CONFIG_S32C1I_SELFTEST */
 
+static inline int mem_reserve(unsigned long start, unsigned long end)
+{
+	return memblock_reserve(start, end - start);
+}
 
 void __init setup_arch(char **cmdline_p)
 {
@@ -463,54 +446,54 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start < initrd_end) {
 		initrd_is_mapped = mem_reserve(__pa(initrd_start),
-					       __pa(initrd_end), 0) == 0;
+					       __pa(initrd_end)) == 0;
 		initrd_below_start_ok = 1;
 	} else {
 		initrd_start = 0;
 	}
 #endif
 
-	mem_reserve(__pa(&_stext),__pa(&_end), 1);
+	mem_reserve(__pa(&_stext), __pa(&_end));
 
 	mem_reserve(__pa(&_WindowVectors_text_start),
-		    __pa(&_WindowVectors_text_end), 0);
+		    __pa(&_WindowVectors_text_end));
 
 	mem_reserve(__pa(&_DebugInterruptVector_literal_start),
-		    __pa(&_DebugInterruptVector_text_end), 0);
+		    __pa(&_DebugInterruptVector_text_end));
 
 	mem_reserve(__pa(&_KernelExceptionVector_literal_start),
-		    __pa(&_KernelExceptionVector_text_end), 0);
+		    __pa(&_KernelExceptionVector_text_end));
 
 	mem_reserve(__pa(&_UserExceptionVector_literal_start),
-		    __pa(&_UserExceptionVector_text_end), 0);
+		    __pa(&_UserExceptionVector_text_end));
 
 	mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
-		    __pa(&_DoubleExceptionVector_text_end), 0);
+		    __pa(&_DoubleExceptionVector_text_end));
 
 #if XCHAL_EXCM_LEVEL >= 2
 	mem_reserve(__pa(&_Level2InterruptVector_text_start),
-		    __pa(&_Level2InterruptVector_text_end), 0);
+		    __pa(&_Level2InterruptVector_text_end));
 #endif
 #if XCHAL_EXCM_LEVEL >= 3
 	mem_reserve(__pa(&_Level3InterruptVector_text_start),
-		    __pa(&_Level3InterruptVector_text_end), 0);
+		    __pa(&_Level3InterruptVector_text_end));
 #endif
 #if XCHAL_EXCM_LEVEL >= 4
 	mem_reserve(__pa(&_Level4InterruptVector_text_start),
-		    __pa(&_Level4InterruptVector_text_end), 0);
+		    __pa(&_Level4InterruptVector_text_end));
 #endif
 #if XCHAL_EXCM_LEVEL >= 5
 	mem_reserve(__pa(&_Level5InterruptVector_text_start),
-		    __pa(&_Level5InterruptVector_text_end), 0);
+		    __pa(&_Level5InterruptVector_text_end));
 #endif
 #if XCHAL_EXCM_LEVEL >= 6
 	mem_reserve(__pa(&_Level6InterruptVector_text_start),
-		    __pa(&_Level6InterruptVector_text_end), 0);
+		    __pa(&_Level6InterruptVector_text_end));
 #endif
 
 #ifdef CONFIG_SMP
 	mem_reserve(__pa(&_SecondaryResetVector_text_start),
-		    __pa(&_SecondaryResetVector_text_end), 0);
+		    __pa(&_SecondaryResetVector_text_end));
 #endif
 	parse_early_param();
 	bootmem_init();
@@ -555,6 +538,137 @@ static int __init topology_init(void)
 }
 subsys_initcall(topology_init);
 
+void cpu_reset(void)
+{
+#if XCHAL_HAVE_PTP_MMU
+	local_irq_disable();
+	/*
+	 * We have full MMU: all autoload ways, ways 7, 8 and 9 of DTLB must
+	 * be flushed.
+	 * Way 4 is not currently used by linux.
+	 * Ways 5 and 6 shall not be touched on MMUv2 as they are hardwired.
+	 * Way 5 shall be flushed and way 6 shall be set to identity mapping
+	 * on MMUv3.
+	 */
+	local_flush_tlb_all();
+	invalidate_page_directory();
+#if XCHAL_HAVE_SPANNING_WAY
+	/* MMU v3 */
+	{
+		unsigned long vaddr = (unsigned long)cpu_reset;
+		unsigned long paddr = __pa(vaddr);
+		unsigned long tmpaddr = vaddr + SZ_512M;
+		unsigned long tmp0, tmp1, tmp2, tmp3;
+
+		/*
+		 * Find a place for the temporary mapping. It must not be
+		 * in the same 512MB region with vaddr or paddr, otherwise
+		 * there may be multihit exception either on entry to the
+		 * temporary mapping, or on entry to the identity mapping.
+		 * (512MB is the biggest page size supported by TLB.)
+		 */
+		while (((tmpaddr ^ paddr) & -SZ_512M) == 0)
+			tmpaddr += SZ_512M;
+
+		/* Invalidate mapping in the selected temporary area */
+		if (itlb_probe(tmpaddr) & 0x8)
+			invalidate_itlb_entry(itlb_probe(tmpaddr));
+		if (itlb_probe(tmpaddr + PAGE_SIZE) & 0x8)
+			invalidate_itlb_entry(itlb_probe(tmpaddr + PAGE_SIZE));
+
+		/*
+		 * Map two consecutive pages starting at the physical address
+		 * of this function to the temporary mapping area.
+		 */
+		write_itlb_entry(__pte((paddr & PAGE_MASK) |
+				       _PAGE_HW_VALID |
+				       _PAGE_HW_EXEC |
+				       _PAGE_CA_BYPASS),
+				 tmpaddr & PAGE_MASK);
+		write_itlb_entry(__pte(((paddr & PAGE_MASK) + PAGE_SIZE) |
+				       _PAGE_HW_VALID |
+				       _PAGE_HW_EXEC |
+				       _PAGE_CA_BYPASS),
+				 (tmpaddr & PAGE_MASK) + PAGE_SIZE);
+
+		/* Reinitialize TLB */
+		__asm__ __volatile__ ("movi	%0, 1f\n\t"
+				      "movi	%3, 2f\n\t"
+				      "add	%0, %0, %4\n\t"
+				      "add	%3, %3, %5\n\t"
+				      "jx	%0\n"
+				      /*
+				       * No literal, data or stack access
+				       * below this point
+				       */
+				      "1:\n\t"
+				      /* Initialize *tlbcfg */
+				      "movi	%0, 0\n\t"
+				      "wsr	%0, itlbcfg\n\t"
+				      "wsr	%0, dtlbcfg\n\t"
+				      /* Invalidate TLB way 5 */
+				      "movi	%0, 4\n\t"
+				      "movi	%1, 5\n"
+				      "1:\n\t"
+				      "iitlb	%1\n\t"
+				      "idtlb	%1\n\t"
+				      "add	%1, %1, %6\n\t"
+				      "addi	%0, %0, -1\n\t"
+				      "bnez	%0, 1b\n\t"
+				      /* Initialize TLB way 6 */
+				      "movi	%0, 7\n\t"
+				      "addi	%1, %9, 3\n\t"
+				      "addi	%2, %9, 6\n"
+				      "1:\n\t"
+				      "witlb	%1, %2\n\t"
+				      "wdtlb	%1, %2\n\t"
+				      "add	%1, %1, %7\n\t"
+				      "add	%2, %2, %7\n\t"
+				      "addi	%0, %0, -1\n\t"
+				      "bnez	%0, 1b\n\t"
+				      /* Jump to identity mapping */
+				      "jx	%3\n"
+				      "2:\n\t"
+				      /* Complete way 6 initialization */
+				      "witlb	%1, %2\n\t"
+				      "wdtlb	%1, %2\n\t"
+				      /* Invalidate temporary mapping */
+				      "sub	%0, %9, %7\n\t"
+				      "iitlb	%0\n\t"
+				      "add	%0, %0, %8\n\t"
+				      "iitlb	%0"
+				      : "=&a"(tmp0), "=&a"(tmp1), "=&a"(tmp2),
+					"=&a"(tmp3)
+				      : "a"(tmpaddr - vaddr),
+					"a"(paddr - vaddr),
+					"a"(SZ_128M), "a"(SZ_512M),
+					"a"(PAGE_SIZE),
+					"a"((tmpaddr + SZ_512M) & PAGE_MASK)
+				      : "memory");
+	}
+#endif
+#endif
+	__asm__ __volatile__ ("movi	a2, 0\n\t"
+			      "wsr	a2, icountlevel\n\t"
+			      "movi	a2, 0\n\t"
+			      "wsr	a2, icount\n\t"
+#if XCHAL_NUM_IBREAK > 0
+			      "wsr	a2, ibreakenable\n\t"
+#endif
+#if XCHAL_HAVE_LOOPS
+			      "wsr	a2, lcount\n\t"
+#endif
+			      "movi	a2, 0x1f\n\t"
+			      "wsr	a2, ps\n\t"
+			      "isync\n\t"
+			      "jx	%0\n\t"
+			      :
+			      : "a" (XCHAL_RESET_VECTOR_VADDR)
+			      : "a2");
+	for (;;)
+		;
+}
+
 void machine_restart(char * cmd)
 {
 	platform_restart();
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index b9ad9fe..9a5bcd0 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -12,6 +12,8 @@
  * Chris Zankel <chris@zankel.net>
  */
 
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/time.h>
@@ -134,16 +136,52 @@ void local_timer_setup(unsigned cpu)
 					0xf, 0xffffffff);
 }
 
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+#ifdef CONFIG_OF
+static void __init calibrate_ccount(void)
+{
+	struct device_node *cpu;
+	struct clk *clk;
+
+	cpu = of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu");
+	if (cpu) {
+		clk = of_clk_get(cpu, 0);
+		if (!IS_ERR(clk)) {
+			ccount_freq = clk_get_rate(clk);
+			return;
+		} else {
+			pr_warn("%s: CPU input clock not found\n",
+				__func__);
+		}
+	} else {
+		pr_warn("%s: CPU node not found in the device tree\n",
+			__func__);
+	}
+
+	platform_calibrate_ccount();
+}
+#else
+static inline void calibrate_ccount(void)
+{
+	platform_calibrate_ccount();
+}
+#endif
+#endif
+
 void __init time_init(void)
 {
+	of_clk_init(NULL);
 #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
 	printk("Calibrating CPU frequency ");
-	platform_calibrate_ccount();
+	calibrate_ccount();
 	printk("%d.%02d MHz\n", (int)ccount_freq/1000000,
 			(int)(ccount_freq/10000)%100);
 #else
 	ccount_freq = CONFIG_XTENSA_CPU_CLOCK*1000000UL;
 #endif
+	WARN(!ccount_freq,
+	     "%s: CPU clock frequency is not set up correctly\n",
+	     __func__);
 	clocksource_register_hz(&ccount_clocksource, ccount_freq);
 	local_timer_setup(0);
 	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction);
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index c417cbe..31411fc 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -30,10 +30,6 @@ jiffies = jiffies_64 + 4;
 jiffies = jiffies_64;
 #endif
 
-#ifndef KERNELOFFSET
-#define KERNELOFFSET 0xd0003000
-#endif
-
 /* Note: In the following macros, it would be nice to specify only the
    vector name and section kind and construct "sym" and "section" using
    CPP concatenation, but that does not work reliably.  Concatenating a
@@ -93,6 +89,9 @@ SECTIONS
     VMLINUX_SYMBOL(__sched_text_start) = .;
     *(.sched.literal .sched.text)
     VMLINUX_SYMBOL(__sched_text_end) = .;
+    VMLINUX_SYMBOL(__cpuidle_text_start) = .;
+    *(.cpuidle.literal .cpuidle.text)
+    VMLINUX_SYMBOL(__cpuidle_text_end) = .;
     VMLINUX_SYMBOL(__lock_text_start) = .;
     *(.spinlock.literal .spinlock.text)
     VMLINUX_SYMBOL(__lock_text_end) = .;
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 9a9a593..80e4cfb 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -8,7 +8,7 @@
  * for more details.
  *
  * Copyright (C) 2001 - 2005 Tensilica Inc.
- * Copyright (C) 2014 Cadence Design Systems Inc.
+ * Copyright (C) 2014 - 2016 Cadence Design Systems Inc.
  *
  * Chris Zankel	<chris@zankel.net>
  * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
@@ -25,284 +25,43 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/mm.h>
+#include <linux/of_fdt.h>
 
 #include <asm/bootparam.h>
 #include <asm/page.h>
 #include <asm/sections.h>
 #include <asm/sysmem.h>
 
-struct sysmem_info sysmem __initdata;
-
-static void __init sysmem_dump(void)
-{
-	unsigned i;
-
-	pr_debug("Sysmem:\n");
-	for (i = 0; i < sysmem.nr_banks; ++i)
-		pr_debug("  0x%08lx - 0x%08lx (%ldK)\n",
-			 sysmem.bank[i].start, sysmem.bank[i].end,
-			 (sysmem.bank[i].end - sysmem.bank[i].start) >> 10);
-}
-
-/*
- * Find bank with maximal .start such that bank.start <= start
- */
-static inline struct meminfo * __init find_bank(unsigned long start)
-{
-	unsigned i;
-	struct meminfo *it = NULL;
-
-	for (i = 0; i < sysmem.nr_banks; ++i)
-		if (sysmem.bank[i].start <= start)
-			it = sysmem.bank + i;
-		else
-			break;
-	return it;
-}
-
-/*
- * Move all memory banks starting at 'from' to a new place at 'to',
- * adjust nr_banks accordingly.
- * Both 'from' and 'to' must be inside the sysmem.bank.
- *
- * Returns: 0 (success), -ENOMEM (not enough space in the sysmem.bank).
- */
-static int __init move_banks(struct meminfo *to, struct meminfo *from)
-{
-	unsigned n = sysmem.nr_banks - (from - sysmem.bank);
-
-	if (to > from && to - from + sysmem.nr_banks > SYSMEM_BANKS_MAX)
-		return -ENOMEM;
-	if (to != from)
-		memmove(to, from, n * sizeof(struct meminfo));
-	sysmem.nr_banks += to - from;
-	return 0;
-}
-
-/*
- * Add new bank to sysmem. Resulting sysmem is the union of bytes of the
- * original sysmem and the new bank.
- *
- * Returns: 0 (success), < 0 (error)
- */
-int __init add_sysmem_bank(unsigned long start, unsigned long end)
-{
-	unsigned i;
-	struct meminfo *it = NULL;
-	unsigned long sz;
-	unsigned long bank_sz = 0;
-
-	if (start == end ||
-	    (start < end) != (PAGE_ALIGN(start) < (end & PAGE_MASK))) {
-		pr_warn("Ignoring small memory bank 0x%08lx size: %ld bytes\n",
-			start, end - start);
-		return -EINVAL;
-	}
-
-	start = PAGE_ALIGN(start);
-	end &= PAGE_MASK;
-	sz = end - start;
-
-	it = find_bank(start);
-
-	if (it)
-		bank_sz = it->end - it->start;
-
-	if (it && bank_sz >= start - it->start) {
-		if (end - it->start > bank_sz)
-			it->end = end;
-		else
-			return 0;
-	} else {
-		if (!it)
-			it = sysmem.bank;
-		else
-			++it;
-
-		if (it - sysmem.bank < sysmem.nr_banks &&
-		    it->start - start <= sz) {
-			it->start = start;
-			if (it->end - it->start < sz)
-				it->end = end;
-			else
-				return 0;
-		} else {
-			if (move_banks(it + 1, it) < 0) {
-				pr_warn("Ignoring memory bank 0x%08lx size %ld bytes\n",
-					start, end - start);
-				return -EINVAL;
-			}
-			it->start = start;
-			it->end = end;
-			return 0;
-		}
-	}
-	sz = it->end - it->start;
-	for (i = it + 1 - sysmem.bank; i < sysmem.nr_banks; ++i)
-		if (sysmem.bank[i].start - it->start <= sz) {
-			if (sz < sysmem.bank[i].end - it->start)
-				it->end = sysmem.bank[i].end;
-		} else {
-			break;
-		}
-
-	move_banks(it + 1, sysmem.bank + i);
-	return 0;
-}
-
-/*
- * mem_reserve(start, end, must_exist)
- *
- * Reserve some memory from the memory pool.
- * If must_exist is set and a part of the region being reserved does not exist
- * memory map is not altered.
- *
- * Parameters:
- *  start	Start of region,
- *  end		End of region,
- *  must_exist	Must exist in memory pool.
- *
- * Returns:
- *  0 (success)
- *  < 0 (error)
- */
-
-int __init mem_reserve(unsigned long start, unsigned long end, int must_exist)
-{
-	struct meminfo *it;
-	struct meminfo *rm = NULL;
-	unsigned long sz;
-	unsigned long bank_sz = 0;
-
-	start = start & PAGE_MASK;
-	end = PAGE_ALIGN(end);
-	sz = end - start;
-	if (!sz)
-		return -EINVAL;
-
-	it = find_bank(start);
-
-	if (it)
-		bank_sz = it->end - it->start;
-
-	if ((!it || end - it->start > bank_sz) && must_exist) {
-		pr_warn("mem_reserve: [0x%0lx, 0x%0lx) not in any region!\n",
-			start, end);
-		return -EINVAL;
-	}
-
-	if (it && start - it->start <= bank_sz) {
-		if (start == it->start) {
-			if (end - it->start < bank_sz) {
-				it->start = end;
-				return 0;
-			} else {
-				rm = it;
-			}
-		} else {
-			it->end = start;
-			if (end - it->start < bank_sz)
-				return add_sysmem_bank(end,
-						       it->start + bank_sz);
-			++it;
-		}
-	}
-
-	if (!it)
-		it = sysmem.bank;
-
-	for (; it < sysmem.bank + sysmem.nr_banks; ++it) {
-		if (it->end - start <= sz) {
-			if (!rm)
-				rm = it;
-		} else {
-			if (it->start - start < sz)
-				it->start = end;
-			break;
-		}
-	}
-
-	if (rm)
-		move_banks(rm, it);
-
-	return 0;
-}
-
-
 /*
  * Initialize the bootmem system and give it all low memory we have available.
  */
 
 void __init bootmem_init(void)
 {
-	unsigned long pfn;
-	unsigned long bootmap_start, bootmap_size;
-	int i;
-
-	/* Reserve all memory below PLATFORM_DEFAULT_MEM_START, as memory
+	/* Reserve all memory below PHYS_OFFSET, as memory
 	 * accounting doesn't work for pages below that address.
 	 *
-	 * If PLATFORM_DEFAULT_MEM_START is zero reserve page at address 0:
+	 * If PHYS_OFFSET is zero reserve page at address 0:
 	 * successfull allocations should never return NULL.
 	 */
-	if (PLATFORM_DEFAULT_MEM_START)
-		mem_reserve(0, PLATFORM_DEFAULT_MEM_START, 0);
+	if (PHYS_OFFSET)
+		memblock_reserve(0, PHYS_OFFSET);
 	else
-		mem_reserve(0, 1, 0);
+		memblock_reserve(0, 1);
 
-	sysmem_dump();
-	max_low_pfn = max_pfn = 0;
-	min_low_pfn = ~0;
-
-	for (i=0; i < sysmem.nr_banks; i++) {
-		pfn = PAGE_ALIGN(sysmem.bank[i].start) >> PAGE_SHIFT;
-		if (pfn < min_low_pfn)
-			min_low_pfn = pfn;
-		pfn = PAGE_ALIGN(sysmem.bank[i].end - 1) >> PAGE_SHIFT;
-		if (pfn > max_pfn)
-			max_pfn = pfn;
-	}
+	early_init_fdt_scan_reserved_mem();
 
-	if (min_low_pfn > max_pfn)
+	if (!memblock_phys_mem_size())
 		panic("No memory found!\n");
 
-	max_low_pfn = max_pfn < MAX_MEM_PFN >> PAGE_SHIFT ?
-		max_pfn : MAX_MEM_PFN >> PAGE_SHIFT;
+	min_low_pfn = PFN_UP(memblock_start_of_DRAM());
+	min_low_pfn = max(min_low_pfn, PFN_UP(PHYS_OFFSET));
+	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+	max_low_pfn = min(max_pfn, MAX_LOW_PFN);
 
-	/* Find an area to use for the bootmem bitmap. */
-
-	bootmap_size = bootmem_bootmap_pages(max_low_pfn - min_low_pfn);
-	bootmap_size <<= PAGE_SHIFT;
-	bootmap_start = ~0;
-
-	for (i=0; i<sysmem.nr_banks; i++)
-		if (sysmem.bank[i].end - sysmem.bank[i].start >= bootmap_size) {
-			bootmap_start = sysmem.bank[i].start;
-			break;
-		}
-
-	if (bootmap_start == ~0UL)
-		panic("Cannot find %ld bytes for bootmap\n", bootmap_size);
-
-	/* Reserve the bootmem bitmap area */
-
-	mem_reserve(bootmap_start, bootmap_start + bootmap_size, 1);
-	bootmap_size = init_bootmem_node(NODE_DATA(0),
-					 bootmap_start >> PAGE_SHIFT,
-					 min_low_pfn,
-					 max_low_pfn);
-
-	/* Add all remaining memory pieces into the bootmem map */
-
-	for (i = 0; i < sysmem.nr_banks; i++) {
-		if (sysmem.bank[i].start >> PAGE_SHIFT < max_low_pfn) {
-			unsigned long end = min(max_low_pfn << PAGE_SHIFT,
-						sysmem.bank[i].end);
-			free_bootmem(sysmem.bank[i].start,
-				     end - sysmem.bank[i].start);
-		}
-	}
+	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
 
+	memblock_dump_all();
 }
 
 
@@ -344,7 +103,7 @@ void __init mem_init(void)
 		"    fixmap  : 0x%08lx - 0x%08lx  (%5lu kB)\n"
 #endif
 #ifdef CONFIG_MMU
-		"    vmalloc : 0x%08x - 0x%08x  (%5u MB)\n"
+		"    vmalloc : 0x%08lx - 0x%08lx  (%5lu MB)\n"
 #endif
 		"    lowmem  : 0x%08lx - 0x%08lx  (%5lu MB)\n",
 #ifdef CONFIG_HIGHMEM
@@ -395,16 +154,16 @@ static void __init parse_memmap_one(char *p)
 	switch (*p) {
 	case '@':
 		start_at = memparse(p + 1, &p);
-		add_sysmem_bank(start_at, start_at + mem_size);
+		memblock_add(start_at, mem_size);
 		break;
 
 	case '$':
 		start_at = memparse(p + 1, &p);
-		mem_reserve(start_at, start_at + mem_size, 0);
+		memblock_reserve(start_at, mem_size);
 		break;
 
 	case 0:
-		mem_reserve(mem_size, 0, 0);
+		memblock_reserve(mem_size, -mem_size);
 		break;
 
 	default:
diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h
index 12b15ad..27d7a52 100644
--- a/arch/xtensa/platforms/iss/include/platform/simcall.h
+++ b/arch/xtensa/platforms/iss/include/platform/simcall.h
@@ -76,6 +76,11 @@ static inline int __simc(int a, int b, int c, int d)
 	return ret;
 }
 
+static inline int simc_exit(int exit_code)
+{
+	return __simc(SYS_exit, exit_code, 0, 0);
+}
+
 static inline int simc_open(const char *file, int flags, int mode)
 {
 	return __simc(SYS_open, (int) file, flags, mode);
diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c
index 3918205..379aedd 100644
--- a/arch/xtensa/platforms/iss/setup.c
+++ b/arch/xtensa/platforms/iss/setup.c
@@ -32,6 +32,8 @@
 #include <asm/platform.h>
 #include <asm/bootparam.h>
 
+#include <platform/simcall.h>
+
 
 void __init platform_init(bp_tag_t* bootparam)
 {
@@ -41,37 +43,19 @@ void __init platform_init(bp_tag_t* bootparam)
 void platform_halt(void)
 {
 	pr_info(" ** Called platform_halt() **\n");
-	__asm__ __volatile__("movi a2, 1\nsimcall\n");
+	simc_exit(0);
 }
 
 void platform_power_off(void)
 {
 	pr_info(" ** Called platform_power_off() **\n");
-	__asm__ __volatile__("movi a2, 1\nsimcall\n");
+	simc_exit(0);
 }
 void platform_restart(void)
 {
 	/* Flush and reset the mmu, simulate a processor reset, and
 	 * jump to the reset vector. */
-
-	__asm__ __volatile__("movi	a2, 15\n\t"
-			     "wsr	a2, icountlevel\n\t"
-			     "movi	a2, 0\n\t"
-			     "wsr	a2, icount\n\t"
-#if XCHAL_NUM_IBREAK > 0
-			     "wsr	a2, ibreakenable\n\t"
-#endif
-#if XCHAL_HAVE_LOOPS
-			     "wsr	a2, lcount\n\t"
-#endif
-			     "movi	a2, 0x1f\n\t"
-			     "wsr	a2, ps\n\t"
-			     "isync\n\t"
-			     "jx	%0\n\t"
-			     :
-			     : "a" (XCHAL_RESET_VECTOR_VADDR)
-			     : "a2");
-
+	cpu_reset();
 	/* control never gets here */
 }
 
@@ -98,7 +82,7 @@ void platform_heartbeat(void)
 static int
 iss_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
 {
-	__asm__ __volatile__("movi a2, -1; simcall\n");
+	simc_exit(1);
 	return NOTIFY_DONE;
 }
 
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index f58a4e6..ede04cc 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -86,6 +86,7 @@ static void simdisk_transfer(struct simdisk *dev, unsigned long sector,
 		unsigned long io;
 
 		simc_lseek(dev->fd, offset, SEEK_SET);
+		READ_ONCE(*buffer);
 		if (write)
 			io = simc_write(dev->fd, buffer, nbytes);
 		else
diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
index 4904c5c..9c2f1fb 100644
--- a/arch/xtensa/platforms/xt2000/setup.c
+++ b/arch/xtensa/platforms/xt2000/setup.c
@@ -64,26 +64,7 @@ void platform_restart(void)
 {
 	/* Flush and reset the mmu, simulate a processor reset, and
 	 * jump to the reset vector. */
-
-	__asm__ __volatile__ ("movi	a2, 15\n\t"
-			      "wsr	a2, icountlevel\n\t"
-			      "movi	a2, 0\n\t"
-			      "wsr	a2, icount\n\t"
-#if XCHAL_NUM_IBREAK > 0
-			      "wsr	a2, ibreakenable\n\t"
-#endif
-#if XCHAL_HAVE_LOOPS
-			      "wsr	a2, lcount\n\t"
-#endif
-			      "movi	a2, 0x1f\n\t"
-			      "wsr	a2, ps\n\t"
-			      "isync\n\t"
-			      "jx	%0\n\t"
-			      :
-			      : "a" (XCHAL_RESET_VECTOR_VADDR)
-			      : "a2"
-			      );
-
+	cpu_reset();
 	/* control never gets here */
 }
 
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index b509d1f..779be72 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -26,6 +26,8 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
 
 #include <asm/timex.h>
 #include <asm/processor.h>
@@ -54,58 +56,63 @@ void platform_restart(void)
 {
 	/* Flush and reset the mmu, simulate a processor reset, and
 	 * jump to the reset vector. */
+	cpu_reset();
+	/* control never gets here */
+}
 
+void __init platform_setup(char **cmdline)
+{
+}
 
-	__asm__ __volatile__ ("movi	a2, 15\n\t"
-			      "wsr	a2, icountlevel\n\t"
-			      "movi	a2, 0\n\t"
-			      "wsr	a2, icount\n\t"
-#if XCHAL_NUM_IBREAK > 0
-			      "wsr	a2, ibreakenable\n\t"
-#endif
-#if XCHAL_HAVE_LOOPS
-			      "wsr	a2, lcount\n\t"
-#endif
-			      "movi	a2, 0x1f\n\t"
-			      "wsr	a2, ps\n\t"
-			      "isync\n\t"
-			      "jx	%0\n\t"
-			      :
-			      : "a" (XCHAL_RESET_VECTOR_VADDR)
-			      : "a2"
-			      );
+/* early initialization */
 
-	/* control never gets here */
+void __init platform_init(bp_tag_t *first)
+{
 }
 
-void __init platform_setup(char **cmdline)
+/* Heartbeat. */
+
+void platform_heartbeat(void)
+{
+}
+
+#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
+
+void __init platform_calibrate_ccount(void)
 {
+	ccount_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
 }
 
+#endif
+
 #ifdef CONFIG_OF
 
-static void __init update_clock_frequency(struct device_node *node)
+static void __init xtfpga_clk_setup(struct device_node *np)
 {
-	struct property *newfreq;
+	void __iomem *base = of_iomap(np, 0);
+	struct clk *clk;
 	u32 freq;
 
-	if (!of_property_read_u32(node, "clock-frequency", &freq) && freq != 0)
+	if (!base) {
+		pr_err("%s: invalid address\n", np->name);
 		return;
+	}
 
-	newfreq = kzalloc(sizeof(*newfreq) + sizeof(u32), GFP_KERNEL);
-	if (!newfreq)
-		return;
-	newfreq->value = newfreq + 1;
-	newfreq->length = sizeof(freq);
-	newfreq->name = kstrdup("clock-frequency", GFP_KERNEL);
-	if (!newfreq->name) {
-		kfree(newfreq);
+	freq = __raw_readl(base);
+	iounmap(base);
+	clk = clk_register_fixed_rate(NULL, np->name, NULL, 0, freq);
+
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk registration failed\n", np->name);
 		return;
 	}
 
-	*(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR);
-	of_update_property(node, newfreq);
+	if (of_clk_add_provider(np, of_clk_src_simple_get, clk)) {
+		pr_err("%s: clk provider registration failed\n", np->name);
+		return;
+	}
 }
+CLK_OF_DECLARE(xtfpga_clk, "cdns,xtfpga-clock", xtfpga_clk_setup);
 
 #define MAC_LEN 6
 static void __init update_local_mac(struct device_node *node)
@@ -137,56 +144,15 @@ static void __init update_local_mac(struct device_node *node)
 
 static int __init machine_setup(void)
 {
-	struct device_node *clock;
 	struct device_node *eth = NULL;
 
-	for_each_node_by_name(clock, "main-oscillator")
-		update_clock_frequency(clock);
-
 	if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
 		update_local_mac(eth);
 	return 0;
 }
 arch_initcall(machine_setup);
 
-#endif
-
-/* early initialization */
-
-void __init platform_init(bp_tag_t *first)
-{
-}
-
-/* Heartbeat. */
-
-void platform_heartbeat(void)
-{
-}
-
-#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
-
-void __init platform_calibrate_ccount(void)
-{
-	long clk_freq = 0;
-#ifdef CONFIG_OF
-	struct device_node *cpu =
-		of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu");
-	if (cpu) {
-		u32 freq;
-		update_clock_frequency(cpu);
-		if (!of_property_read_u32(cpu, "clock-frequency", &freq))
-			clk_freq = freq;
-	}
-#endif
-	if (!clk_freq)
-		clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
-
-	ccount_freq = clk_freq;
-}
-
-#endif
-
-#ifndef CONFIG_OF
+#else
 
 #include <linux/serial_8250.h>
 #include <linux/if.h>
diff --git a/arch/xtensa/variants/csp/include/variant/core.h b/arch/xtensa/variants/csp/include/variant/core.h
new file mode 100644
index 0000000..ccd81f0
--- /dev/null
+++ b/arch/xtensa/variants/csp/include/variant/core.h
@@ -0,0 +1,575 @@
+/* 
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ *				processor CORE configuration
+ *
+ *  See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+   Copyright (c) 1999-2015 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE		0	/* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_DEPBITS		0	/* DEPBITS instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	0	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		4	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MX			0	/* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS	0	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		0	/* core RunStall control port */
+#define XCHAL_HAVE_PSO			0	/* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM		0	/* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION	0	/* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+
+#define XCHAL_HAVE_FUSION		 0	/* Fusion*/
+#define XCHAL_HAVE_FUSION_FP	 0	        /* Fusion FP option */
+#define XCHAL_HAVE_FUSION_LOW_POWER 0	/* Fusion Low Power option */
+#define XCHAL_HAVE_FUSION_AES	 0	        /* Fusion BLE/Wifi AES-128 CCM option */
+#define XCHAL_HAVE_FUSION_CONVENC	 0       /* Fusion Conv Encode option */
+#define XCHAL_HAVE_FUSION_LFSR_CRC	 0	/* Fusion LFSR-CRC option */
+#define XCHAL_HAVE_FUSION_BITOPS	 0	/* Fusion Bit Operations Support option */
+#define XCHAL_HAVE_FUSION_AVS	 0	/* Fusion AVS option */
+#define XCHAL_HAVE_FUSION_16BIT_BASEBAND	 0	/* Fusion 16-bit Baseband option */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4		0	/* HiFi4 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4_VFPU		0	/* HiFi4 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI3		0	/* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3_VFPU		0	/* HiFi3 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP		0	/* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI		0	
+
+
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector or user floating-point pkg */
+#define XCHAL_HAVE_USER_DPFPU         0       /* user DP floating-point pkg */
+#define XCHAL_HAVE_USER_SPFPU         0       /* user DP floating-point pkg */
+#define XCHAL_HAVE_FP                 0      /* single prec floating point */
+#define XCHAL_HAVE_FP_DIV             0  /* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP           0        /* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT            0 /* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT           0        /* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP                        0     /* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV            0 /* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP          0       /* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT           0        /* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT          0       /* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_ACCEL		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_DFP_accel		XCHAL_HAVE_DFP_ACCEL				/* for backward compatibility */
+
+#define XCHAL_HAVE_DFPU_SINGLE_ONLY    0                 	/* DFPU Coprocessor, single precision only */
+#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE  0               	/* DFPU Coprocessor, single and double precision */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_PDX4		        0	/* PDX4 */
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+#define XCHAL_HAVE_CONNXD2_DUALLSFLIX   0	/* ConnX D2 & Dual LoadStore Flix */
+#define XCHAL_HAVE_BBE16		0	/* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT		0	/* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV		0	/* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD	0	/* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP		0	/* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BSP3			0	/* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE	0	/* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16		0	/* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI	0	/* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16		0	/* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16		0	/* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3		0	/* basic 3-way FLIX option */
+#define XCHAL_HAVE_GRIVPEP              0   /*  GRIVPEP is General Release of IVPEP */
+#define XCHAL_HAVE_GRIVPEP_HISTOGRAM    0   /* Histogram option on GRIVPEP */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS	1	/* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		16	/* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY		1	/* d-side pipeline delay
+						   (1 = 5-stage, 2 = 7-stage) */
+#define XCHAL_CLOCK_GATING_GLOBAL	0	/* global clock gating */
+#define XCHAL_CLOCK_GATING_FUNCUNIT	0	/* funct. unit clock gating */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		1100002	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"xt_lnx"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x00057D54	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC1B3FFFE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x1C857D54	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX6.0.2"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2600	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		2	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		260002	/* major*100+minor */
+#define XCHAL_HW_REL_LX6		1
+#define XCHAL_HW_REL_LX6_0		1
+#define XCHAL_HW_REL_LX6_0_2		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2600	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	2	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		260002	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2600	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	2	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		260002	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		64	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		64	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		6	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		6	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		65536	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	0	/* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH		0	/* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1		0	/* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES	0	/* dcache pref. castout bufsz */
+#define XCHAL_PREFETCH_ENTRIES		0	/* cache prefetch entries */
+#define XCHAL_PREFETCH_BLOCK_ENTRIES	0	/* prefetch block streams */
+#define XCHAL_HAVE_CACHE_BLOCKOPS	0	/* block prefetch for caches */
+#define XCHAL_HAVE_ICACHE_TEST		1	/* Icache test instructions */
+#define XCHAL_HAVE_DCACHE_TEST		1	/* Dcache test instructions */
+#define XCHAL_HAVE_ICACHE_DYN_WAYS	0	/* Icache dynamic way support */
+#define XCHAL_HAVE_DCACHE_DYN_WAYS	0	/* Dcache dynamic way support */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		8
+#define XCHAL_DCACHE_SETWIDTH		6
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	16
+#define XCHAL_DCACHE_ACCESS_SIZE	16
+
+#define XCHAL_DCACHE_BANKS		1	/* number of banks */
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+/*  Whether MEMCTL register has anything useful  */
+#define XCHAL_USE_MEMCTL		(((XCHAL_LOOP_BUFFER_SIZE > 0)	||	\
+					   XCHAL_DCACHE_IS_COHERENT	||	\
+					   XCHAL_HAVE_ICACHE_DYN_WAYS	||	\
+					   XCHAL_HAVE_DCACHE_DYN_WAYS)	&&	\
+					   (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0))
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE	1	/* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		16	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F00BF
+#define XCHAL_INTLEVEL2_MASK		0x00001140
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00008000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F00BF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F11FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F1FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		2
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		2
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		4
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_PROFILING
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F1000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000033F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING	0x00008000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+#define XCHAL_PROFILING_INTERRUPT	15	/* profiling interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL4_NUM		15
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 2, 3.)  */
+
+
+/*
+ *  External interrupt mapping.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 2) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		21	/* (intlevel 3) */
+/*  EXTERNAL BInterrupt pin numbers mapped to each core interrupt number:  */
+#define XCHAL_INT0_EXTNUM		0	/* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM		1	/* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM		2	/* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM		3	/* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM		4	/* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM		5	/* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM		6	/* (intlevel 2) */
+#define XCHAL_INT9_EXTNUM		7	/* (intlevel 3) */
+#define XCHAL_INT12_EXTNUM		8	/* (intlevel 2) */
+#define XCHAL_INT14_EXTNUM		9	/* (intlevel 7) */
+#define XCHAL_INT16_EXTNUM		10	/* (intlevel 1) */
+#define XCHAL_INT17_EXTNUM		11	/* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM		12	/* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM		13	/* (intlevel 1) */
+#define XCHAL_INT20_EXTNUM		14	/* (intlevel 1) */
+#define XCHAL_INT21_EXTNUM		15	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_HALT			0	/* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER		0	/* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0x00002000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00002000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0x00001000
+#define XCHAL_RESET_VECTOR1_PADDR	0x00001000
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0x00002340
+#define XCHAL_USER_VECTOR_PADDR		0x00002340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0x00002300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00002300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x000023C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000023C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x00002000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00002000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x00002180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00002180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x000021C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000021C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x00002200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00002200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0x00002240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00002240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0x00002280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00002280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0x000022C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000022C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG MODULE
+  ----------------------------------------------------------------------*/
+
+/*  Misc  */
+#define XCHAL_HAVE_DEBUG_ERI		1	/* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB		1	/* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG		1	/* JTAG to debug module */
+
+/*  On-Chip Debug (OCD)  */
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR		1	/* L32DDR/S32DDR (faster OCD) */
+
+/*  TRAX (in core)  */
+#define XCHAL_HAVE_TRAX			1	/* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE		262144	/* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE	1	/* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH		0	/* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH		0	/* timestamp bitwidth, 0=none */
+
+/*  Perf counters  */
+#define XCHAL_NUM_PERF_COUNTERS		8	/* performance counters */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY		6	/* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/csp/include/variant/tie-asm.h b/arch/xtensa/variants/csp/include/variant/tie-asm.h
new file mode 100644
index 0000000..ba773c4
--- /dev/null
+++ b/arch/xtensa/variants/csp/include/variant/tie-asm.h
@@ -0,0 +1,194 @@
+/* 
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+   macros, etc.) for this specific Xtensa processor's TIE extensions
+   and options.  It is customized to this Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT	0x0003	/* both of the above */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC	0x000C	/* both of the above */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI	0x0070	/* all of the above three */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi)	( ((optie) & XTHAL_SAS_ANYOT)  \
+					| ((ccuse) & XTHAL_SAS_ANYCC)  \
+					| ((abi)   & XTHAL_SAS_ANYABI) )
+
+
+    /*
+      *  Macro to store all non-coprocessor (extra) custom TIE and optional state
+      *  (not including zero-overhead loop registers).
+      *  Required parameters:
+      *      ptr         Save area pointer address register (clobbered)
+      *                  (register must contain a 4 byte aligned address).
+      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+      *                  registers are clobbered, the remaining are unused).
+      *  Optional parameters:
+      *      continue    If macro invoked as part of a larger store sequence, set to 1
+      *                  if this is not the first in the sequence.  Defaults to 0.
+      *      ofs         Offset from start of larger sequence (from value of first ptr
+      *                  in sequence) at which to store.  Defaults to next available space
+      *                  (or 0 if <continue> is 0).
+      *      select      Select what category(ies) of registers to store, as a bitmask
+      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
+      *      alloc       Select what category(ies) of registers to allocate; if any
+      *                  category is selected here that is not in <select>, space for
+      *                  the corresponding registers is skipped without doing any store.
+      */
+    .macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional global registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	rur.THREADPTR	\at1		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	rsr.ACCLO	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.ACCHI	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	rsr.BR	\at1		// boolean option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.SCOMPARE1	\at1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	rsr.M0	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+8
+	rsr.M1	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+12
+	rsr.M2	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+16
+	rsr.M3	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+20
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.endif
+    .endm	// xchal_ncp_store
+
+    /*
+      *  Macro to load all non-coprocessor (extra) custom TIE and optional state
+      *  (not including zero-overhead loop registers).
+      *  Required parameters:
+      *      ptr         Save area pointer address register (clobbered)
+      *                  (register must contain a 4 byte aligned address).
+      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+      *                  registers are clobbered, the remaining are unused).
+      *  Optional parameters:
+      *      continue    If macro invoked as part of a larger load sequence, set to 1
+      *                  if this is not the first in the sequence.  Defaults to 0.
+      *      ofs         Offset from start of larger sequence (from value of first ptr
+      *                  in sequence) at which to load.  Defaults to next available space
+      *                  (or 0 if <continue> is 0).
+      *      select      Select what category(ies) of registers to load, as a bitmask
+      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
+      *      alloc       Select what category(ies) of registers to allocate; if any
+      *                  category is selected here that is not in <select>, space for
+      *                  the corresponding registers is skipped without doing any load.
+      */
+    .macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional global registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wur.THREADPTR	\at1		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.ACCLO	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.ACCHI	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.BR	\at1		// boolean option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.SCOMPARE1	\at1		// conditional store option
+	l32i	\at1, \ptr, .Lxchal_ofs_+8
+	wsr.M0	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+12
+	wsr.M1	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+16
+	wsr.M2	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+20
+	wsr.M3	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.endif
+    .endm	// xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+#define XCHAL_SA_NUM_ATMPS	1
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/csp/include/variant/tie.h b/arch/xtensa/variants/csp/include/variant/tie.h
new file mode 100644
index 0000000..3ce391cf
--- /dev/null
+++ b/arch/xtensa/variants/csp/include/variant/tie.h
@@ -0,0 +1,161 @@
+/* 
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+   that extend basic Xtensa core functionality.  It is customized to this
+   Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			1	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x80	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP           	7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP1_SA_SIZE		0
+#define XCHAL_CP1_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		36
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		48	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		4	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	9
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	0
+#define XCHAL_CP1_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+/* Byte length of instruction from its first byte, per FLIX.  */
+#define XCHAL_BYTE0_FORMAT_LENGTHS	\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+