diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/platforms/maple/pci.c | 176 |
1 files changed, 169 insertions, 7 deletions
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 1b82761..8debae3 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -8,7 +8,7 @@ * 2 of the License, or (at your option) any later version. */ -#define DEBUG +#undef DEBUG #include <linux/kernel.h> #include <linux/pci.h> @@ -16,6 +16,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/irq.h> #include <asm/sections.h> #include <asm/io.h> @@ -33,7 +34,7 @@ #define DBG(x...) #endif -static struct pci_controller *u3_agp, *u3_ht; +static struct pci_controller *u3_agp, *u3_ht, *u4_pcie; static int __init fixup_one_level_bus_range(struct device_node *node, int higher) { @@ -287,6 +288,114 @@ static struct pci_ops u3_ht_pci_ops = u3_ht_write_config }; +static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off) +{ + return (1 << PCI_SLOT(devfn)) | + (PCI_FUNC(devfn) << 8) | + ((off >> 8) << 28) | + (off & 0xfcu); +} + +static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn, + unsigned int off) +{ + return (bus << 16) | + (devfn << 8) | + ((off >> 8) << 28) | + (off & 0xfcu) | 1u; +} + +static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, int offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) + caddr = u4_pcie_cfa0(dev_fn, offset); + else + caddr = u4_pcie_cfa1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x03; + return hose->cfg_data + offset; +} + +static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8(addr); + break; + case 2: + *val = in_le16(addr); + break; + default: + *val = in_le32(addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} +static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + volatile void __iomem *addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + if (offset >= 0x1000) + return PCIBIOS_BAD_REGISTER_NUMBER; + addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8(addr, val); + (void) in_8(addr); + break; + case 2: + out_le16(addr, val); + (void) in_le16(addr); + break; + default: + out_le32(addr, val); + (void) in_le32(addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u4_pcie_pci_ops = +{ + u4_pcie_read_config, + u4_pcie_write_config +}; + static void __init setup_u3_agp(struct pci_controller* hose) { /* On G5, we move AGP up to high bus number so we don't need @@ -307,6 +416,26 @@ static void __init setup_u3_agp(struct pci_controller* hose) u3_agp = hose; } +static void __init setup_u4_pcie(struct pci_controller* hose) +{ + /* We currently only implement the "non-atomic" config space, to + * be optimised later. + */ + hose->ops = &u4_pcie_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + /* The bus contains a bridge from root -> device, we need to + * make it visible on bus 0 so that we pick the right type + * of config cycles. If we didn't, we would have to force all + * config cycles to be type 1. So we override the "bus-range" + * property here + */ + hose->first_busno = 0x00; + hose->last_busno = 0xff; + u4_pcie = hose; +} + static void __init setup_u3_ht(struct pci_controller* hose) { hose->ops = &u3_ht_pci_ops; @@ -354,6 +483,10 @@ static int __init add_bridge(struct device_node *dev) setup_u3_ht(hose); disp_name = "U3-HT"; primary = 1; + } else if (device_is_compatible(dev, "u4-pcie")) { + setup_u4_pcie(hose); + disp_name = "U4-PCIE"; + primary = 0; } printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", disp_name, hose->first_busno, hose->last_busno); @@ -361,7 +494,6 @@ static int __init add_bridge(struct device_node *dev) /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ pci_process_bridge_OF_ranges(hose, dev, primary); - pci_setup_phb_io(hose, primary); /* Fixup "bus-range" OF property */ fixup_bus_range(dev); @@ -376,8 +508,17 @@ void __init maple_pcibios_fixup(void) DBG(" -> maple_pcibios_fixup\n"); - for_each_pci_dev(dev) - pci_read_irq_line(dev); + for_each_pci_dev(dev) { + /* Fixup IRQ for PCIe host */ + if (u4_pcie != NULL && dev->bus->number == 0 && + pci_bus_to_host(dev->bus) == u4_pcie) { + printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n"); + dev->irq = irq_create_mapping(NULL, 1); + if (dev->irq != NO_IRQ) + set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + } else + pci_read_irq_line(dev); + } DBG(" <- maple_pcibios_fixup\n"); } @@ -388,8 +529,10 @@ static void __init maple_fixup_phb_resources(void) list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; + hose->io_resource.start += offset; hose->io_resource.end += offset; + printk(KERN_INFO "PCI Host %d, io start: %llx; io end: %llx\n", hose->global_number, (unsigned long long)hose->io_resource.start, @@ -431,6 +574,19 @@ void __init maple_pci_init(void) if (ht && add_bridge(ht) != 0) of_node_put(ht); + /* + * We need to call pci_setup_phb_io for the HT bridge first + * so it gets the I/O port numbers starting at 0, and we + * need to call it for the AGP bridge after that so it gets + * small positive I/O port numbers. + */ + if (u3_ht) + pci_setup_phb_io(u3_ht, 1); + if (u3_agp) + pci_setup_phb_io(u3_agp, 0); + if (u4_pcie) + pci_setup_phb_io(u4_pcie, 0); + /* Fixup the IO resources on our host bridges as the common code * does it only for childs of the host bridges */ @@ -465,8 +621,11 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) return defirq; np = pci_device_to_OF_node(pdev); - if (np == NULL) + if (np == NULL) { + printk("Failed to locate OF node for IDE %s\n", + pci_name(pdev)); return defirq; + } irq = irq_of_parse_and_map(np, channel & 0x1); if (irq == NO_IRQ) { printk("Failed to map onboard IDE interrupt for channel %d\n", @@ -479,6 +638,9 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) /* XXX: To remove once all firmwares are ok */ static void fixup_maple_ide(struct pci_dev* dev) { + if (!machine_is(maple)) + return; + #if 0 /* Enable this to enable IDE port 0 */ { u8 v; @@ -495,7 +657,7 @@ static void fixup_maple_ide(struct pci_dev* dev) dev->resource[4].start = 0xcc00; dev->resource[4].end = 0xcc10; #endif -#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ +#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ { struct pci_dev *apicdev; u32 v; |