summaryrefslogtreecommitdiffstats
path: root/arch/x86_64/kernel/io_apic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86_64/kernel/io_apic.c')
-rw-r--r--arch/x86_64/kernel/io_apic.c365
1 files changed, 224 insertions, 141 deletions
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index fe429e5..2a1dcd5 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -55,10 +55,6 @@ int sis_apic_bug; /* not actually supported, dummy for compile */
static int no_timer_check;
-static int disable_timer_pin_1 __initdata;
-
-int timer_over_8254 __initdata = 1;
-
/* Where if anywhere is the i8259 connect in external int mode */
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
@@ -88,6 +84,52 @@ static struct irq_pin_list {
short apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
+struct io_apic {
+ unsigned int index;
+ unsigned int unused[3];
+ unsigned int data;
+};
+
+static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
+{
+ return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx)
+ + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK);
+}
+
+static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ return readl(&io_apic->data);
+}
+
+static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(reg, &io_apic->index);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Re-write a value: to be used for read-modify-write
+ * cycles where the read already set up the index register.
+ */
+static inline void io_apic_modify(unsigned int apic, unsigned int value)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ writel(value, &io_apic->data);
+}
+
+/*
+ * Synchronize the IO-APIC and the CPU by doing
+ * a dummy read from the IO-APIC
+ */
+static inline void io_apic_sync(unsigned int apic)
+{
+ struct io_apic __iomem *io_apic = io_apic_base(apic);
+ readl(&io_apic->data);
+}
+
#define __DO_ACTION(R, ACTION, FINAL) \
\
{ \
@@ -126,11 +168,39 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
return eu.entry;
}
-static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+/*
+ * When we write a new IO APIC routing entry, we need to write the high
+ * word first! If the mask bit in the low word is clear, we will enable
+ * the interrupt, and we need to make sure the entry is fully populated
+ * before that happens.
+ */
+static void
+__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
{
- unsigned long flags;
union entry_union eu;
eu.entry = e;
+ io_apic_write(apic, 0x11 + 2*pin, eu.w2);
+ io_apic_write(apic, 0x10 + 2*pin, eu.w1);
+}
+
+static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __ioapic_write_entry(apic, pin, e);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
+/*
+ * When we mask an IO APIC routing entry, we need to write the low
+ * word first, in order to set the mask bit before we change the
+ * high bits!
+ */
+static void ioapic_mask_entry(int apic, int pin)
+{
+ unsigned long flags;
+ union entry_union eu = { .entry.mask = 1 };
+
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x10 + 2*pin, eu.w1);
io_apic_write(apic, 0x11 + 2*pin, eu.w2);
@@ -256,9 +326,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
/*
* Disable it in the IO-APIC irq-routing table:
*/
- memset(&entry, 0, sizeof(entry));
- entry.mask = 1;
- ioapic_write_entry(apic, pin, entry);
+ ioapic_mask_entry(apic, pin);
}
static void clear_IO_APIC (void)
@@ -282,29 +350,6 @@ static int __init disable_ioapic_setup(char *str)
}
early_param("noapic", disable_ioapic_setup);
-/* Actually the next is obsolete, but keep it for paranoid reasons -AK */
-static int __init disable_timer_pin_setup(char *arg)
-{
- disable_timer_pin_1 = 1;
- return 1;
-}
-__setup("disable_timer_pin_1", disable_timer_pin_setup);
-
-static int __init setup_disable_8254_timer(char *s)
-{
- timer_over_8254 = -1;
- return 1;
-}
-static int __init setup_enable_8254_timer(char *s)
-{
- timer_over_8254 = 2;
- return 1;
-}
-
-__setup("disable_8254_timer", setup_disable_8254_timer);
-__setup("enable_8254_timer", setup_enable_8254_timer);
-
-
/*
* Find the IRQ entry number of a certain pin.
*/
@@ -684,14 +729,28 @@ static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result)
return vector;
}
+static void __clear_irq_vector(int irq)
+{
+ cpumask_t mask;
+ int cpu, vector;
+
+ BUG_ON(!irq_vector[irq]);
+
+ vector = irq_vector[irq];
+ cpus_and(mask, irq_domain[irq], cpu_online_map);
+ for_each_cpu_mask(cpu, mask)
+ per_cpu(vector_irq, cpu)[vector] = -1;
+
+ irq_vector[irq] = 0;
+ irq_domain[irq] = CPU_MASK_NONE;
+}
+
void __setup_vector_irq(int cpu)
{
/* Initialize vector_irq on a new cpu */
/* This function must be called with vector_lock held */
- unsigned long flags;
int irq, vector;
-
/* Mark the inuse vectors */
for (irq = 0; irq < NR_IRQ_VECTORS; ++irq) {
if (!cpu_isset(cpu, irq_domain[irq]))
@@ -724,31 +783,71 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
trigger == IOAPIC_LEVEL)
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_fasteoi_irq, "fasteoi");
- else
+ else {
+ irq_desc[irq].status |= IRQ_DELAYED_DISABLE;
set_irq_chip_and_handler_name(irq, &ioapic_chip,
handle_edge_irq, "edge");
+ }
}
-
-static void __init setup_IO_APIC_irqs(void)
+static void __init setup_IO_APIC_irq(int apic, int pin, int idx, int irq)
{
struct IO_APIC_route_entry entry;
- int apic, pin, idx, irq, first_notcon = 1, vector;
+ int vector;
unsigned long flags;
- apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
- for (apic = 0; apic < nr_ioapics; apic++) {
- for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+ /*
+ * add it to the IO-APIC irq-routing table:
+ */
+ memset(&entry,0,sizeof(entry));
- /*
- * add it to the IO-APIC irq-routing table:
- */
- memset(&entry,0,sizeof(entry));
+ entry.delivery_mode = INT_DELIVERY_MODE;
+ entry.dest_mode = INT_DEST_MODE;
+ entry.mask = 0; /* enable IRQ */
+ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+
+ entry.trigger = irq_trigger(idx);
+ entry.polarity = irq_polarity(idx);
- entry.delivery_mode = INT_DELIVERY_MODE;
- entry.dest_mode = INT_DEST_MODE;
- entry.mask = 0; /* enable IRQ */
+ if (irq_trigger(idx)) {
+ entry.trigger = 1;
+ entry.mask = 1;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
+ }
+
+ if (!apic && !IO_APIC_IRQ(irq))
+ return;
+
+ if (IO_APIC_IRQ(irq)) {
+ cpumask_t mask;
+ vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
+ if (vector < 0)
+ return;
+
+ entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
+ entry.vector = vector;
+
+ ioapic_register_intr(irq, vector, IOAPIC_AUTO);
+ if (!apic && (irq < 16))
+ disable_8259A_irq(irq);
+ }
+
+ ioapic_write_entry(apic, pin, entry);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ set_native_irq_info(irq, TARGET_CPUS);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+}
+
+static void __init setup_IO_APIC_irqs(void)
+{
+ int apic, pin, idx, irq, first_notcon = 1;
+
+ apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
+
+ for (apic = 0; apic < nr_ioapics; apic++) {
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
@@ -760,39 +859,11 @@ static void __init setup_IO_APIC_irqs(void)
continue;
}
- entry.trigger = irq_trigger(idx);
- entry.polarity = irq_polarity(idx);
-
- if (irq_trigger(idx)) {
- entry.trigger = 1;
- entry.mask = 1;
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
- }
-
irq = pin_2_irq(idx, apic, pin);
add_pin_to_irq(irq, apic, pin);
- if (!apic && !IO_APIC_IRQ(irq))
- continue;
-
- if (IO_APIC_IRQ(irq)) {
- cpumask_t mask;
- vector = assign_irq_vector(irq, TARGET_CPUS, &mask);
- if (vector < 0)
- continue;
-
- entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
- entry.vector = vector;
-
- ioapic_register_intr(irq, vector, IOAPIC_AUTO);
- if (!apic && (irq < 16))
- disable_8259A_irq(irq);
- }
- ioapic_write_entry(apic, pin, entry);
+ setup_IO_APIC_irq(apic, pin, idx, irq);
- spin_lock_irqsave(&ioapic_lock, flags);
- set_native_irq_info(irq, TARGET_CPUS);
- spin_unlock_irqrestore(&ioapic_lock, flags);
}
}
@@ -1497,10 +1568,33 @@ static inline void unlock_ExtINT_logic(void)
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
- *
- * FIXME: really need to revamp this for modern platforms only.
*/
-static inline void check_timer(void)
+
+static int try_apic_pin(int apic, int pin, char *msg)
+{
+ apic_printk(APIC_VERBOSE, KERN_INFO
+ "..TIMER: trying IO-APIC=%d PIN=%d %s",
+ apic, pin, msg);
+
+ /*
+ * Ok, does IRQ0 through the IOAPIC work?
+ */
+ if (!no_timer_check && timer_irq_works()) {
+ nmi_watchdog_default();
+ if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
+ setup_nmi();
+ enable_8259A_irq(0);
+ }
+ return 1;
+ }
+ clear_IO_APIC_pin(apic, pin);
+ apic_printk(APIC_QUIET, KERN_ERR " .. failed\n");
+ return 0;
+}
+
+/* The function from hell */
+static void check_timer(void)
{
int apic1, pin1, apic2, pin2;
int vector;
@@ -1521,61 +1615,43 @@ static inline void check_timer(void)
*/
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- if (timer_over_8254 > 0)
- enable_8259A_irq(0);
pin1 = find_isa_irq_pin(0, mp_INT);
apic1 = find_isa_irq_apic(0, mp_INT);
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
- vector, apic1, pin1, apic2, pin2);
+ /* Do this first, otherwise we get double interrupts on ATI boards */
+ if ((pin1 != -1) && try_apic_pin(apic1, pin1,"with 8259 IRQ0 disabled"))
+ return;
- if (pin1 != -1) {
- /*
- * Ok, does IRQ0 through the IOAPIC work?
- */
- unmask_IO_APIC_irq(0);
- if (!no_timer_check && timer_irq_works()) {
- nmi_watchdog_default();
- if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
- setup_nmi();
- enable_8259A_irq(0);
- }
- if (disable_timer_pin_1 > 0)
- clear_IO_APIC_pin(0, pin1);
- return;
- }
- clear_IO_APIC_pin(apic1, pin1);
- apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
- "connected to IO-APIC\n");
- }
+ /* Now try again with IRQ0 8259A enabled.
+ Assumes timer is on IO-APIC 0 ?!? */
+ enable_8259A_irq(0);
+ unmask_IO_APIC_irq(0);
+ if (try_apic_pin(apic1, pin1, "with 8259 IRQ0 enabled"))
+ return;
+ disable_8259A_irq(0);
+
+ /* Always try pin0 and pin2 on APIC 0 to handle buggy timer overrides
+ on Nvidia boards */
+ if (!(apic1 == 0 && pin1 == 0) &&
+ try_apic_pin(0, 0, "fallback with 8259 IRQ0 disabled"))
+ return;
+ if (!(apic1 == 0 && pin1 == 2) &&
+ try_apic_pin(0, 2, "fallback with 8259 IRQ0 disabled"))
+ return;
- apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
- "through the 8259A ... ");
+ /* Then try pure 8259A routing on the 8259 as reported by BIOS*/
+ enable_8259A_irq(0);
if (pin2 != -1) {
- apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
- apic2, pin2);
- /*
- * legacy devices should be connected to IO APIC #0
- */
setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
- if (timer_irq_works()) {
- apic_printk(APIC_VERBOSE," works.\n");
- nmi_watchdog_default();
- if (nmi_watchdog == NMI_IO_APIC) {
- setup_nmi();
- }
+ if (try_apic_pin(apic2,pin2,"8259A broadcast ExtINT from BIOS"))
return;
- }
- /*
- * Cleanup, just in case ...
- */
- clear_IO_APIC_pin(apic2, pin2);
}
- apic_printk(APIC_VERBOSE," failed.\n");
+
+ /* Tried all possibilities to go through the IO-APIC. Now come the
+ really cheesy fallbacks. */
if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
@@ -1771,7 +1847,7 @@ void destroy_irq(unsigned int irq)
dynamic_irq_cleanup(irq);
spin_lock_irqsave(&vector_lock, flags);
- irq_vector[irq] = 0;
+ __clear_irq_vector(irq);
spin_unlock_irqrestore(&vector_lock, flags);
}
@@ -1889,18 +1965,16 @@ void arch_teardown_msi_irq(unsigned int irq)
static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
{
- u32 low, high;
- low = read_ht_irq_low(irq);
- high = read_ht_irq_high(irq);
+ struct ht_irq_msg msg;
+ fetch_ht_irq_msg(irq, &msg);
- low &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
- high &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
+ msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
+ msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
- low |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
- high |= HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
+ msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest);
- write_ht_irq_low(irq, low);
- write_ht_irq_high(irq, high);
+ write_ht_irq_msg(irq, &msg);
}
static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
@@ -1921,7 +1995,7 @@ static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
dest = cpu_mask_to_apicid(tmp);
- target_ht_irq(irq, dest, vector & 0xff);
+ target_ht_irq(irq, dest, vector);
set_native_irq_info(irq, mask);
}
#endif
@@ -1944,14 +2018,15 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
vector = assign_irq_vector(irq, TARGET_CPUS, &tmp);
if (vector >= 0) {
- u32 low, high;
+ struct ht_irq_msg msg;
unsigned dest;
dest = cpu_mask_to_apicid(tmp);
- high = HT_IRQ_HIGH_DEST_ID(dest);
+ msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest);
- low = HT_IRQ_LOW_BASE |
+ msg.address_lo =
+ HT_IRQ_LOW_BASE |
HT_IRQ_LOW_DEST_ID(dest) |
HT_IRQ_LOW_VECTOR(vector) |
((INT_DEST_MODE == 0) ?
@@ -1960,10 +2035,10 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
HT_IRQ_LOW_RQEOI_EDGE |
((INT_DELIVERY_MODE != dest_LowestPrio) ?
HT_IRQ_LOW_MT_FIXED :
- HT_IRQ_LOW_MT_ARBITRATED);
+ HT_IRQ_LOW_MT_ARBITRATED) |
+ HT_IRQ_LOW_IRQ_MASKED;
- write_ht_irq_low(irq, low);
- write_ht_irq_high(irq, high);
+ write_ht_irq_msg(irq, &msg);
set_irq_chip_and_handler_name(irq, &ht_irq_chip,
handle_edge_irq, "edge");
@@ -2074,7 +2149,15 @@ void __init setup_ioapic_dest(void)
if (irq_entry == -1)
continue;
irq = pin_2_irq(irq_entry, ioapic, pin);
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+
+ /* setup_IO_APIC_irqs could fail to get vector for some device
+ * when you have too many devices, because at that time only boot
+ * cpu is online.
+ */
+ if(!irq_vector[irq])
+ setup_IO_APIC_irq(ioapic, pin, irq_entry, irq);
+ else
+ set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
}
OpenPOWER on IntegriCloud