diff options
Diffstat (limited to 'arch/x86')
-rw-r--r-- | arch/x86/Kconfig | 8 | ||||
-rw-r--r-- | arch/x86/include/asm/iosf_mbi.h | 90 | ||||
-rw-r--r-- | arch/x86/kernel/Makefile | 1 | ||||
-rw-r--r-- | arch/x86/kernel/iosf_mbi.c | 226 |
4 files changed, 325 insertions, 0 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0952ecd..ca5959a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2393,6 +2393,14 @@ config X86_DMA_REMAP bool depends on STA2X11 +config IOSF_MBI + bool + depends on PCI + ---help--- + To be selected by modules requiring access to the Intel OnChip System + Fabric (IOSF) Sideband MailBox Interface (MBI). For MBI platforms + enumerable by PCI. + source "net/Kconfig" source "drivers/Kconfig" diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h new file mode 100644 index 0000000..8e71c79 --- /dev/null +++ b/arch/x86/include/asm/iosf_mbi.h @@ -0,0 +1,90 @@ +/* + * iosf_mbi.h: Intel OnChip System Fabric MailBox access support + */ + +#ifndef IOSF_MBI_SYMS_H +#define IOSF_MBI_SYMS_H + +#define MBI_MCR_OFFSET 0xD0 +#define MBI_MDR_OFFSET 0xD4 +#define MBI_MCRX_OFFSET 0xD8 + +#define MBI_RD_MASK 0xFEFFFFFF +#define MBI_WR_MASK 0X01000000 + +#define MBI_MASK_HI 0xFFFFFF00 +#define MBI_MASK_LO 0x000000FF +#define MBI_ENABLE 0xF0 + +/* Baytrail available units */ +#define BT_MBI_UNIT_AUNIT 0x00 +#define BT_MBI_UNIT_SMC 0x01 +#define BT_MBI_UNIT_CPU 0x02 +#define BT_MBI_UNIT_BUNIT 0x03 +#define BT_MBI_UNIT_PMC 0x04 +#define BT_MBI_UNIT_GFX 0x06 +#define BT_MBI_UNIT_SMI 0x0C +#define BT_MBI_UNIT_USB 0x43 +#define BT_MBI_UNIT_SATA 0xA3 +#define BT_MBI_UNIT_PCIE 0xA6 + +/* Baytrail read/write opcodes */ +#define BT_MBI_AUNIT_READ 0x10 +#define BT_MBI_AUNIT_WRITE 0x11 +#define BT_MBI_SMC_READ 0x10 +#define BT_MBI_SMC_WRITE 0x11 +#define BT_MBI_CPU_READ 0x10 +#define BT_MBI_CPU_WRITE 0x11 +#define BT_MBI_BUNIT_READ 0x10 +#define BT_MBI_BUNIT_WRITE 0x11 +#define BT_MBI_PMC_READ 0x06 +#define BT_MBI_PMC_WRITE 0x07 +#define BT_MBI_GFX_READ 0x00 +#define BT_MBI_GFX_WRITE 0x01 +#define BT_MBI_SMIO_READ 0x06 +#define BT_MBI_SMIO_WRITE 0x07 +#define BT_MBI_USB_READ 0x06 +#define BT_MBI_USB_WRITE 0x07 +#define BT_MBI_SATA_READ 0x00 +#define BT_MBI_SATA_WRITE 0x01 +#define BT_MBI_PCIE_READ 0x00 +#define BT_MBI_PCIE_WRITE 0x01 + +/** + * iosf_mbi_read() - MailBox Interface read command + * @port: port indicating subunit being accessed + * @opcode: port specific read or write opcode + * @offset: register address offset + * @mdr: register data to be read + * + * Locking is handled by spinlock - cannot sleep. + * Return: Nonzero on error + */ +int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr); + +/** + * iosf_mbi_write() - MailBox unmasked write command + * @port: port indicating subunit being accessed + * @opcode: port specific read or write opcode + * @offset: register address offset + * @mdr: register data to be written + * + * Locking is handled by spinlock - cannot sleep. + * Return: Nonzero on error + */ +int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr); + +/** + * iosf_mbi_modify() - MailBox masked write command + * @port: port indicating subunit being accessed + * @opcode: port specific read or write opcode + * @offset: register address offset + * @mdr: register data being modified + * @mask: mask indicating bits in mdr to be modified + * + * Locking is handled by spinlock - cannot sleep. + * Return: Nonzero on error + */ +int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask); + +#endif /* IOSF_MBI_SYMS_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9b0a34e..dbe9bd6 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -111,6 +111,7 @@ obj-$(CONFIG_EFI) += sysfb_efi.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_TRACING) += tracepoint.o +obj-$(CONFIG_IOSF_MBI) += iosf_mbi.o ### # 64 bit specific files diff --git a/arch/x86/kernel/iosf_mbi.c b/arch/x86/kernel/iosf_mbi.c new file mode 100644 index 0000000..c3aae66 --- /dev/null +++ b/arch/x86/kernel/iosf_mbi.c @@ -0,0 +1,226 @@ +/* + * IOSF-SB MailBox Interface Driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * + * The IOSF-SB is a fabric bus available on Atom based SOC's that uses a + * mailbox interface (MBI) to communicate with mutiple devices. This + * driver implements access to this interface for those platforms that can + * enumerate the device using PCI. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/pci.h> + +#include <asm/iosf_mbi.h> + +static DEFINE_SPINLOCK(iosf_mbi_lock); + +static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset) +{ + return (op << 24) | (port << 16) | (offset << 8) | MBI_ENABLE; +} + +static struct pci_dev *mbi_pdev; /* one mbi device */ + +static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr) +{ + int result; + + if (!mbi_pdev) + return -ENODEV; + + if (mcrx) { + result = pci_write_config_dword(mbi_pdev, MBI_MCRX_OFFSET, + mcrx); + if (result < 0) + goto fail_read; + } + + result = pci_write_config_dword(mbi_pdev, MBI_MCR_OFFSET, mcr); + if (result < 0) + goto fail_read; + + result = pci_read_config_dword(mbi_pdev, MBI_MDR_OFFSET, mdr); + if (result < 0) + goto fail_read; + + return 0; + +fail_read: + dev_err(&mbi_pdev->dev, "PCI config access failed with %d\n", result); + return result; +} + +static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr) +{ + int result; + + if (!mbi_pdev) + return -ENODEV; + + result = pci_write_config_dword(mbi_pdev, MBI_MDR_OFFSET, mdr); + if (result < 0) + goto fail_write; + + if (mcrx) { + result = pci_write_config_dword(mbi_pdev, MBI_MCRX_OFFSET, + mcrx); + if (result < 0) + goto fail_write; + } + + result = pci_write_config_dword(mbi_pdev, MBI_MCR_OFFSET, mcr); + if (result < 0) + goto fail_write; + + return 0; + +fail_write: + dev_err(&mbi_pdev->dev, "PCI config access failed with %d\n", result); + return result; +} + +int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr) +{ + u32 mcr, mcrx; + unsigned long flags; + int ret; + + /*Access to the GFX unit is handled by GPU code */ + if (port == BT_MBI_UNIT_GFX) { + WARN_ON(1); + return -EPERM; + } + + mcr = iosf_mbi_form_mcr(opcode, port, offset & MBI_MASK_LO); + mcrx = offset & MBI_MASK_HI; + + spin_lock_irqsave(&iosf_mbi_lock, flags); + ret = iosf_mbi_pci_read_mdr(mcrx, mcr, mdr); + spin_unlock_irqrestore(&iosf_mbi_lock, flags); + + return ret; +} +EXPORT_SYMBOL(iosf_mbi_read); + +int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr) +{ + u32 mcr, mcrx; + unsigned long flags; + int ret; + + /*Access to the GFX unit is handled by GPU code */ + if (port == BT_MBI_UNIT_GFX) { + WARN_ON(1); + return -EPERM; + } + + mcr = iosf_mbi_form_mcr(opcode, port, offset & MBI_MASK_LO); + mcrx = offset & MBI_MASK_HI; + + spin_lock_irqsave(&iosf_mbi_lock, flags); + ret = iosf_mbi_pci_write_mdr(mcrx, mcr, mdr); + spin_unlock_irqrestore(&iosf_mbi_lock, flags); + + return ret; +} +EXPORT_SYMBOL(iosf_mbi_write); + +int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask) +{ + u32 mcr, mcrx; + u32 value; + unsigned long flags; + int ret; + + /*Access to the GFX unit is handled by GPU code */ + if (port == BT_MBI_UNIT_GFX) { + WARN_ON(1); + return -EPERM; + } + + mcr = iosf_mbi_form_mcr(opcode, port, offset & MBI_MASK_LO); + mcrx = offset & MBI_MASK_HI; + + spin_lock_irqsave(&iosf_mbi_lock, flags); + + /* Read current mdr value */ + ret = iosf_mbi_pci_read_mdr(mcrx, mcr & MBI_RD_MASK, &value); + if (ret < 0) { + spin_unlock_irqrestore(&iosf_mbi_lock, flags); + return ret; + } + + /* Apply mask */ + value &= ~mask; + mdr &= mask; + value |= mdr; + + /* Write back */ + ret = iosf_mbi_pci_write_mdr(mcrx, mcr | MBI_WR_MASK, value); + + spin_unlock_irqrestore(&iosf_mbi_lock, flags); + + return ret; +} +EXPORT_SYMBOL(iosf_mbi_modify); + +static int iosf_mbi_probe(struct pci_dev *pdev, + const struct pci_device_id *unused) +{ + int ret; + + ret = pci_enable_device(pdev); + if (ret < 0) { + dev_err(&pdev->dev, "error: could not enable device\n"); + return ret; + } + + mbi_pdev = pci_dev_get(pdev); + return 0; +} + +static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids); + +static struct pci_driver iosf_mbi_pci_driver = { + .name = "iosf_mbi_pci", + .probe = iosf_mbi_probe, + .id_table = iosf_mbi_pci_ids, +}; + +static int __init iosf_mbi_init(void) +{ + return pci_register_driver(&iosf_mbi_pci_driver); +} + +static void __exit iosf_mbi_exit(void) +{ + pci_unregister_driver(&iosf_mbi_pci_driver); + if (mbi_pdev) { + pci_dev_put(mbi_pdev); + mbi_pdev = NULL; + } +} + +module_init(iosf_mbi_init); +module_exit(iosf_mbi_exit); + +MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>"); +MODULE_DESCRIPTION("IOSF Mailbox Interface accessor"); +MODULE_LICENSE("GPL v2"); |