diff options
Diffstat (limited to 'arch/x86/pci/irq.c')
| -rw-r--r-- | arch/x86/pci/irq.c | 84 |
1 files changed, 35 insertions, 49 deletions
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index fecbce6..0696d50 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 0; } + if (io_apic_assign_pci_irqs) + return 0; + /* Find IRQ routing entry */ if (!pirq_table) @@ -1039,56 +1042,15 @@ static void __init pcibios_fixup_irqs(void) pirq_penalty[dev->irq]++; } + if (io_apic_assign_pci_irqs) + return; + dev = NULL; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; -#ifdef CONFIG_X86_IO_APIC - /* - * Recalculate IRQ numbers if we use the I/O APIC. - */ - if (io_apic_assign_pci_irqs) { - int irq; - - /* - * interrupt pins are numbered starting from 1 - */ - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin - 1); - /* - * Busses behind bridges are typically not listed in the - * MP-table. In this case we have to look up the IRQ - * based on the parent bus, parent slot, and pin number. - * The SMP code detects such bridged busses itself so we - * should get into this branch reliably. - */ - if (irq < 0 && dev->bus->parent) { - /* go back to the bridge */ - struct pci_dev *bridge = dev->bus->self; - int bus; - - pin = pci_swizzle_interrupt_pin(dev, pin); - bus = bridge->bus->number; - irq = IO_APIC_get_PCI_irq_vector(bus, - PCI_SLOT(bridge->devfn), pin - 1); - if (irq >= 0) - dev_warn(&dev->dev, - "using bridge %s INT %c to " - "get IRQ %d\n", - pci_name(bridge), - 'A' + pin - 1, irq); - } - if (irq >= 0) { - dev_info(&dev->dev, - "PCI->APIC IRQ transform: INT %c " - "-> IRQ %d\n", - 'A' + pin - 1, irq); - dev->irq = irq; - } - } -#endif /* * Still no IRQ? Try to lookup one... */ @@ -1183,6 +1145,19 @@ int __init pcibios_irq_init(void) pcibios_enable_irq = pirq_enable_irq; pcibios_fixup_irqs(); + + if (io_apic_assign_pci_irqs && pci_routeirq) { + struct pci_dev *dev = NULL; + /* + * PCI IRQ routing is set up by pci_enable_device(), but we + * also do it here in case there are still broken drivers that + * don't use pci_enable_device(). + */ + printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); + for_each_pci_dev(dev) + pirq_enable_irq(dev); + } + return 0; } @@ -1213,16 +1188,23 @@ void pcibios_penalize_isa_irq(int irq, int active) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { + if (pin && !pcibios_lookup_irq(dev, 1)) { char *msg = ""; + if (!io_apic_assign_pci_irqs && dev->irq) + return 0; + if (io_apic_assign_pci_irqs) { +#ifdef CONFIG_X86_IO_APIC + struct pci_dev *temp_dev; int irq; + struct io_apic_irq_attr irq_attr; - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1); + irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, + PCI_SLOT(dev->devfn), + pin - 1, &irq_attr); /* * Busses behind bridges are typically not listed in the MP-table. * In this case we have to look up the IRQ based on the parent bus, @@ -1235,7 +1217,8 @@ static int pirq_enable_irq(struct pci_dev *dev) pin = pci_swizzle_interrupt_pin(dev, pin); irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, - PCI_SLOT(bridge->devfn), pin - 1); + PCI_SLOT(bridge->devfn), + pin - 1, &irq_attr); if (irq >= 0) dev_warn(&dev->dev, "using bridge %s " "INT %c to get IRQ %d\n", @@ -1245,12 +1228,15 @@ static int pirq_enable_irq(struct pci_dev *dev) } dev = temp_dev; if (irq >= 0) { + io_apic_set_pci_routing(&dev->dev, irq, + &irq_attr); + dev->irq = irq; dev_info(&dev->dev, "PCI->APIC IRQ transform: " "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); - dev->irq = irq; return 0; } else msg = "; probably buggy MP table"; +#endif } else if (pci_probe & PCI_BIOS_IRQ_SCAN) msg = ""; else |
