summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/tsc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/tsc.c')
-rw-r--r--arch/x86/kernel/tsc.c533
1 files changed, 533 insertions, 0 deletions
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
new file mode 100644
index 0000000..3c36f92
--- /dev/null
+++ b/arch/x86/kernel/tsc.c
@@ -0,0 +1,533 @@
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/acpi_pmtmr.h>
+#include <linux/cpufreq.h>
+#include <linux/dmi.h>
+#include <linux/delay.h>
+#include <linux/clocksource.h>
+#include <linux/percpu.h>
+
+#include <asm/hpet.h>
+#include <asm/timer.h>
+#include <asm/vgtod.h>
+#include <asm/time.h>
+#include <asm/delay.h>
+
+unsigned int cpu_khz; /* TSC clocks / usec, not used here */
+EXPORT_SYMBOL(cpu_khz);
+unsigned int tsc_khz;
+EXPORT_SYMBOL(tsc_khz);
+
+/*
+ * TSC can be unstable due to cpufreq or due to unsynced TSCs
+ */
+static int tsc_unstable;
+
+/* native_sched_clock() is called before tsc_init(), so
+ we must start with the TSC soft disabled to prevent
+ erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ */
+u64 native_sched_clock(void)
+{
+ u64 this_offset;
+
+ /*
+ * Fall back to jiffies if there's no TSC available:
+ * ( But note that we still use it if the TSC is marked
+ * unstable. We do this because unlike Time Of Day,
+ * the scheduler clock tolerates small errors and it's
+ * very important for it to be as fast as the platform
+ * can achive it. )
+ */
+ if (unlikely(tsc_disabled)) {
+ /* No locking but a rare wrong value is not a big deal: */
+ return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
+ }
+
+ /* read the Time Stamp Counter: */
+ rdtscll(this_offset);
+
+ /* return the value in ns */
+ return cycles_2_ns(this_offset);
+}
+
+/* We need to define a real function for sched_clock, to override the
+ weak default version */
+#ifdef CONFIG_PARAVIRT
+unsigned long long sched_clock(void)
+{
+ return paravirt_sched_clock();
+}
+#else
+unsigned long long
+sched_clock(void) __attribute__((alias("native_sched_clock")));
+#endif
+
+int check_tsc_unstable(void)
+{
+ return tsc_unstable;
+}
+EXPORT_SYMBOL_GPL(check_tsc_unstable);
+
+#ifdef CONFIG_X86_TSC
+int __init notsc_setup(char *str)
+{
+ printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
+ "cannot disable TSC completely.\n");
+ tsc_disabled = 1;
+ return 1;
+}
+#else
+/*
+ * disable flag for tsc. Takes effect by clearing the TSC cpu flag
+ * in cpu/common.c
+ */
+int __init notsc_setup(char *str)
+{
+ setup_clear_cpu_cap(X86_FEATURE_TSC);
+ return 1;
+}
+#endif
+
+__setup("notsc", notsc_setup);
+
+#define MAX_RETRIES 5
+#define SMI_TRESHOLD 50000
+
+/*
+ * Read TSC and the reference counters. Take care of SMI disturbance
+ */
+static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+{
+ u64 t1, t2;
+ int i;
+
+ for (i = 0; i < MAX_RETRIES; i++) {
+ t1 = get_cycles();
+ if (hpet)
+ *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+ else
+ *pm = acpi_pm_read_early();
+ t2 = get_cycles();
+ if ((t2 - t1) < SMI_TRESHOLD)
+ return t2;
+ }
+ return ULLONG_MAX;
+}
+
+/**
+ * native_calibrate_tsc - calibrate the tsc on boot
+ */
+unsigned long native_calibrate_tsc(void)
+{
+ unsigned long flags;
+ u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
+ int hpet = is_hpet_enabled();
+ unsigned int tsc_khz_val = 0;
+
+ local_irq_save(flags);
+
+ tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ outb(0xb0, 0x43);
+ outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+ outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+ tr1 = get_cycles();
+ while ((inb(0x61) & 0x20) == 0);
+ tr2 = get_cycles();
+
+ tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+
+ local_irq_restore(flags);
+
+ /*
+ * Preset the result with the raw and inaccurate PIT
+ * calibration value
+ */
+ delta = (tr2 - tr1);
+ do_div(delta, 50);
+ tsc_khz_val = delta;
+
+ /* hpet or pmtimer available ? */
+ if (!hpet && !pm1 && !pm2) {
+ printk(KERN_INFO "TSC calibrated against PIT\n");
+ goto out;
+ }
+
+ /* Check, whether the sampling was disturbed by an SMI */
+ if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
+ printk(KERN_WARNING "TSC calibration disturbed by SMI, "
+ "using PIT calibration result\n");
+ goto out;
+ }
+
+ tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+ if (hpet) {
+ printk(KERN_INFO "TSC calibrated against HPET\n");
+ if (hpet2 < hpet1)
+ hpet2 += 0x100000000ULL;
+ hpet2 -= hpet1;
+ tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+ do_div(tsc1, 1000000);
+ } else {
+ printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
+ if (pm2 < pm1)
+ pm2 += (u64)ACPI_PM_OVRRUN;
+ pm2 -= pm1;
+ tsc1 = pm2 * 1000000000LL;
+ do_div(tsc1, PMTMR_TICKS_PER_SEC);
+ }
+
+ do_div(tsc2, tsc1);
+ tsc_khz_val = tsc2;
+
+out:
+ return tsc_khz_val;
+}
+
+
+#ifdef CONFIG_X86_32
+/* Only called from the Powernow K7 cpu freq driver */
+int recalibrate_cpu_khz(void)
+{
+#ifndef CONFIG_SMP
+ unsigned long cpu_khz_old = cpu_khz;
+
+ if (cpu_has_tsc) {
+ tsc_khz = calibrate_tsc();
+ cpu_khz = tsc_khz;
+ cpu_data(0).loops_per_jiffy =
+ cpufreq_scale(cpu_data(0).loops_per_jiffy,
+ cpu_khz_old, cpu_khz);
+ return 0;
+ } else
+ return -ENODEV;
+#else
+ return -ENODEV;
+#endif
+}
+
+EXPORT_SYMBOL(recalibrate_cpu_khz);
+
+#endif /* CONFIG_X86_32 */
+
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ * basic equation:
+ * ns = cycles / (freq / ns_per_sec)
+ * ns = cycles * (ns_per_sec / freq)
+ * ns = cycles * (10^9 / (cpu_khz * 10^3))
+ * ns = cycles * (10^6 / cpu_khz)
+ *
+ * Then we use scaling math (suggested by george@mvista.com) to get:
+ * ns = cycles * (10^6 * SC / cpu_khz) / SC
+ * ns = cycles * cyc2ns_scale / SC
+ *
+ * And since SC is a constant power of two, we can convert the div
+ * into a shift.
+ *
+ * We can use khz divisor instead of mhz to keep a better precision, since
+ * cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ * (mathieu.desnoyers@polymtl.ca)
+ *
+ * -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+DEFINE_PER_CPU(unsigned long, cyc2ns);
+
+static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
+{
+ unsigned long long tsc_now, ns_now;
+ unsigned long flags, *scale;
+
+ local_irq_save(flags);
+ sched_clock_idle_sleep_event();
+
+ scale = &per_cpu(cyc2ns, cpu);
+
+ rdtscll(tsc_now);
+ ns_now = __cycles_2_ns(tsc_now);
+
+ if (cpu_khz)
+ *scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
+
+ sched_clock_idle_wakeup_event(0);
+ local_irq_restore(flags);
+}
+
+#ifdef CONFIG_CPU_FREQ
+
+/* Frequency scaling support. Adjust the TSC based timer when the cpu frequency
+ * changes.
+ *
+ * RED-PEN: On SMP we assume all CPUs run with the same frequency. It's
+ * not that important because current Opteron setups do not support
+ * scaling on SMP anyroads.
+ *
+ * Should fix up last_tsc too. Currently gettimeofday in the
+ * first tick after the change will be slightly wrong.
+ */
+
+static unsigned int ref_freq;
+static unsigned long loops_per_jiffy_ref;
+static unsigned long tsc_khz_ref;
+
+static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct cpufreq_freqs *freq = data;
+ unsigned long *lpj, dummy;
+
+ if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
+ return 0;
+
+ lpj = &dummy;
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+#ifdef CONFIG_SMP
+ lpj = &cpu_data(freq->cpu).loops_per_jiffy;
+#else
+ lpj = &boot_cpu_data.loops_per_jiffy;
+#endif
+
+ if (!ref_freq) {
+ ref_freq = freq->old;
+ loops_per_jiffy_ref = *lpj;
+ tsc_khz_ref = tsc_khz;
+ }
+ if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
+ (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
+ (val == CPUFREQ_RESUMECHANGE)) {
+ *lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+
+ tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+ mark_tsc_unstable("cpufreq changes");
+ }
+
+ set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+
+ return 0;
+}
+
+static struct notifier_block time_cpufreq_notifier_block = {
+ .notifier_call = time_cpufreq_notifier
+};
+
+static int __init cpufreq_tsc(void)
+{
+ cpufreq_register_notifier(&time_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ return 0;
+}
+
+core_initcall(cpufreq_tsc);
+
+#endif /* CONFIG_CPU_FREQ */
+
+/* clocksource code */
+
+static struct clocksource clocksource_tsc;
+
+/*
+ * We compare the TSC to the cycle_last value in the clocksource
+ * structure to avoid a nasty time-warp. This can be observed in a
+ * very small window right after one CPU updated cycle_last under
+ * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
+ * is smaller than the cycle_last reference value due to a TSC which
+ * is slighty behind. This delta is nowhere else observable, but in
+ * that case it results in a forward time jump in the range of hours
+ * due to the unsigned delta calculation of the time keeping core
+ * code, which is necessary to support wrapping clocksources like pm
+ * timer.
+ */
+static cycle_t read_tsc(void)
+{
+ cycle_t ret = (cycle_t)get_cycles();
+
+ return ret >= clocksource_tsc.cycle_last ?
+ ret : clocksource_tsc.cycle_last;
+}
+
+static cycle_t __vsyscall_fn vread_tsc(void)
+{
+ cycle_t ret = (cycle_t)vget_cycles();
+
+ return ret >= __vsyscall_gtod_data.clock.cycle_last ?
+ ret : __vsyscall_gtod_data.clock.cycle_last;
+}
+
+static struct clocksource clocksource_tsc = {
+ .name = "tsc",
+ .rating = 300,
+ .read = read_tsc,
+ .mask = CLOCKSOURCE_MASK(64),
+ .shift = 22,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS |
+ CLOCK_SOURCE_MUST_VERIFY,
+#ifdef CONFIG_X86_64
+ .vread = vread_tsc,
+#endif
+};
+
+void mark_tsc_unstable(char *reason)
+{
+ if (!tsc_unstable) {
+ tsc_unstable = 1;
+ printk("Marking TSC unstable due to %s\n", reason);
+ /* Change only the rating, when not registered */
+ if (clocksource_tsc.mult)
+ clocksource_change_rating(&clocksource_tsc, 0);
+ else
+ clocksource_tsc.rating = 0;
+ }
+}
+
+EXPORT_SYMBOL_GPL(mark_tsc_unstable);
+
+static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
+ d->ident);
+ tsc_unstable = 1;
+ return 0;
+}
+
+/* List of systems that have known TSC problems */
+static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
+ {
+ .callback = dmi_mark_tsc_unstable,
+ .ident = "IBM Thinkpad 380XD",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
+ },
+ },
+ {}
+};
+
+/*
+ * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
+ */
+#ifdef CONFIG_MGEODE_LX
+/* RTSC counts during suspend */
+#define RTSC_SUSP 0x100
+
+static void __init check_geode_tsc_reliable(void)
+{
+ unsigned long res_low, res_high;
+
+ rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+ if (res_low & RTSC_SUSP)
+ clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+}
+#else
+static inline void check_geode_tsc_reliable(void) { }
+#endif
+
+/*
+ * Make an educated guess if the TSC is trustworthy and synchronized
+ * over all CPUs.
+ */
+__cpuinit int unsynchronized_tsc(void)
+{
+ if (!cpu_has_tsc || tsc_unstable)
+ return 1;
+
+#ifdef CONFIG_SMP
+ if (apic_is_clustered_box())
+ return 1;
+#endif
+
+ if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ return 0;
+ /*
+ * Intel systems are normally all synchronized.
+ * Exceptions must mark TSC as unstable:
+ */
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
+ /* assume multi socket systems are not synchronized: */
+ if (num_possible_cpus() > 1)
+ tsc_unstable = 1;
+ }
+
+ return tsc_unstable;
+}
+
+static void __init init_tsc_clocksource(void)
+{
+ clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
+ clocksource_tsc.shift);
+ /* lower the rating if we already know its unstable: */
+ if (check_tsc_unstable()) {
+ clocksource_tsc.rating = 0;
+ clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
+ }
+ clocksource_register(&clocksource_tsc);
+}
+
+void __init tsc_init(void)
+{
+ u64 lpj;
+ int cpu;
+
+ if (!cpu_has_tsc)
+ return;
+
+ tsc_khz = calibrate_tsc();
+ cpu_khz = tsc_khz;
+
+ if (!tsc_khz) {
+ mark_tsc_unstable("could not calculate TSC khz");
+ return;
+ }
+
+#ifdef CONFIG_X86_64
+ if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
+ (boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
+ cpu_khz = calibrate_cpu();
+#endif
+
+ lpj = ((u64)tsc_khz * 1000);
+ do_div(lpj, HZ);
+ lpj_fine = lpj;
+
+ printk("Detected %lu.%03lu MHz processor.\n",
+ (unsigned long)cpu_khz / 1000,
+ (unsigned long)cpu_khz % 1000);
+
+ /*
+ * Secondary CPUs do not run through tsc_init(), so set up
+ * all the scale factors for all CPUs, assuming the same
+ * speed as the bootup CPU. (cpufreq notifiers will fix this
+ * up if their speed diverges)
+ */
+ for_each_possible_cpu(cpu)
+ set_cyc2ns_scale(cpu_khz, cpu);
+
+ if (tsc_disabled > 0)
+ return;
+
+ /* now allow native_sched_clock() to use rdtsc */
+ tsc_disabled = 0;
+
+ use_tsc_delay();
+ /* Check and install the TSC clocksource */
+ dmi_check_system(bad_tsc_dmi_table);
+
+ if (unsynchronized_tsc())
+ mark_tsc_unstable("TSCs unsynchronized");
+
+ check_geode_tsc_reliable();
+ init_tsc_clocksource();
+}
+
OpenPOWER on IntegriCloud