diff options
Diffstat (limited to 'arch/x86/kernel/tlb_uv.c')
| -rw-r--r-- | arch/x86/kernel/tlb_uv.c | 189 |
1 files changed, 128 insertions, 61 deletions
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index deb5ebb..ed0c337 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -25,6 +25,8 @@ static int uv_bau_retry_limit __read_mostly; /* position of pnode (which is nasid>>1): */ static int uv_nshift __read_mostly; +/* base pnode in this partition */ +static int uv_partition_base_pnode __read_mostly; static unsigned long uv_mmask __read_mostly; @@ -32,6 +34,34 @@ static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); /* + * Determine the first node on a blade. + */ +static int __init blade_to_first_node(int blade) +{ + int node, b; + + for_each_online_node(node) { + b = uv_node_to_blade_id(node); + if (blade == b) + return node; + } + return -1; /* shouldn't happen */ +} + +/* + * Determine the apicid of the first cpu on a blade. + */ +static int __init blade_to_first_apicid(int blade) +{ + int cpu; + + for_each_present_cpu(cpu) + if (blade == uv_cpu_to_blade_id(cpu)) + return per_cpu(x86_cpu_to_apicid, cpu); + return -1; +} + +/* * Free a software acknowledge hardware resource by clearing its Pending * bit. This will return a reply to the sender. * If the message has timed out, a reply has already been sent by the @@ -67,7 +97,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; cpu = uv_blade_processor_id(); msg->number_of_cpus = - uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); + uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); this_cpu_mask = 1UL << cpu; if (msp->seen_by.bits & this_cpu_mask) return; @@ -215,14 +245,14 @@ static int uv_wait_completion(struct bau_desc *bau_desc, * Returns @flush_mask if some remote flushing remains to be done. The * mask will have some bits still set. */ -const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, +const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode, struct bau_desc *bau_desc, struct cpumask *flush_mask) { int completion_status = 0; int right_shift; int tries = 0; - int blade; + int pnode; int bit; unsigned long mmr_offset; unsigned long index; @@ -265,8 +295,8 @@ const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, * use the IPI method of shootdown on them. */ for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - if (blade == this_blade) + pnode = uv_cpu_to_pnode(bit); + if (pnode == this_pnode) continue; cpumask_clear_cpu(bit, flush_mask); } @@ -309,16 +339,16 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask); int i; int bit; - int blade; + int pnode; int uv_cpu; - int this_blade; + int this_pnode; int locals = 0; struct bau_desc *bau_desc; cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); uv_cpu = uv_blade_processor_id(); - this_blade = uv_numa_blade_id(); + this_pnode = uv_hub_info->pnode; bau_desc = __get_cpu_var(bau_control).descriptor_base; bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu; @@ -326,13 +356,14 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, i = 0; for_each_cpu(bit, flush_mask) { - blade = uv_cpu_to_blade_id(bit); - BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); - if (blade == this_blade) { + pnode = uv_cpu_to_pnode(bit); + BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1)); + if (pnode == this_pnode) { locals++; continue; } - bau_node_set(blade, &bau_desc->distribution); + bau_node_set(pnode - uv_partition_base_pnode, + &bau_desc->distribution); i++; } if (i == 0) { @@ -350,7 +381,7 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, bau_desc->payload.address = va; bau_desc->payload.sending_cpu = cpu; - return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask); + return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask); } /* @@ -418,24 +449,58 @@ void uv_bau_message_interrupt(struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * uv_enable_timeouts + * + * Each target blade (i.e. blades that have cpu's) needs to have + * shootdown message timeouts enabled. The timeout does not cause + * an interrupt, but causes an error message to be returned to + * the sender. + */ static void uv_enable_timeouts(void) { - int i; int blade; - int last_blade; + int nblades; int pnode; - int cur_cpu = 0; - unsigned long apicid; + unsigned long mmr_image; - last_blade = -1; - for_each_online_node(i) { - blade = uv_node_to_blade_id(i); - if (blade == last_blade) + nblades = uv_num_possible_blades(); + + for (blade = 0; blade < nblades; blade++) { + if (!uv_blade_nr_possible_cpus(blade)) continue; - last_blade = blade; - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pnode = uv_blade_to_pnode(blade); - cur_cpu += uv_blade_nr_possible_cpus(i); + mmr_image = + uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL); + /* + * Set the timeout period and then lock it in, in three + * steps; captures and locks in the period. + * + * To program the period, the SOFT_ACK_MODE must be off. + */ + mmr_image &= ~((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Set the 4-bit period. + */ + mmr_image &= ~((unsigned long)0xf << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD << + UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + /* + * Subsequent reversals of the timebase bit (3) cause an + * immediate timeout of one or all INTD resources as + * indicated in bits 2:0 (7 causes all of them to timeout). + */ + mmr_image |= ((unsigned long)1 << + UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT); + uv_write_global_mmr64 + (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); } } @@ -482,8 +547,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) stat->requestee, stat->onetlb, stat->alltlb, stat->s_retry, stat->d_retry, stat->ptc_i); seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", - uv_read_global_mmr64(uv_blade_to_pnode - (uv_cpu_to_blade_id(cpu)), + uv_read_global_mmr64(uv_cpu_to_pnode(cpu), UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), stat->sflush, stat->dflush, stat->retriesok, stat->nomsg, @@ -617,16 +681,18 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) * finish the initialization of the per-blade control structures */ static void __init -uv_table_bases_finish(int blade, int node, int cur_cpu, +uv_table_bases_finish(int blade, struct bau_control *bau_tablesp, struct bau_desc *adp) { struct bau_control *bcp; - int i; + int cpu; - for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) { - bcp = (struct bau_control *)&per_cpu(bau_control, i); + for_each_present_cpu(cpu) { + if (blade != uv_cpu_to_blade_id(cpu)) + continue; + bcp = (struct bau_control *)&per_cpu(bau_control, cpu); bcp->bau_msg_head = bau_tablesp->va_queue_first; bcp->va_queue_first = bau_tablesp->va_queue_first; bcp->va_queue_last = bau_tablesp->va_queue_last; @@ -649,11 +715,10 @@ uv_activation_descriptor_init(int node, int pnode) struct bau_desc *adp; struct bau_desc *ad2; - adp = (struct bau_desc *) - kmalloc_node(16384, GFP_KERNEL, node); + adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node); BUG_ON(!adp); - pa = __pa((unsigned long)adp); + pa = uv_gpa(adp); /* need the real nasid*/ n = pa >> uv_nshift; m = pa & uv_mmask; @@ -667,8 +732,12 @@ uv_activation_descriptor_init(int node, int pnode) for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; - ad2->header.base_dest_nodeid = - uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + /* + * base_dest_nodeid is the first node in the partition, so + * the bit map will indicate partition-relative node numbers. + * note that base_dest_nodeid is actually a nasid. + */ + ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* @@ -686,6 +755,8 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) { struct bau_payload_queue_entry *pqp; + unsigned long pa; + int pn; char *cp; pqp = (struct bau_payload_queue_entry *) kmalloc_node( @@ -696,10 +767,14 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); bau_tablesp->va_queue_first = pqp; + /* + * need the pnode of where the memory was really allocated + */ + pa = uv_gpa(pqp); + pn = pa >> uv_nshift; uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, - ((unsigned long)pnode << - UV_PAYLOADQ_PNODE_SHIFT) | + ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | uv_physnodeaddr(pqp)); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, uv_physnodeaddr(pqp)); @@ -715,8 +790,9 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) /* * Initialization of each UV blade's structures */ -static int __init uv_init_blade(int blade, int node, int cur_cpu) +static int __init uv_init_blade(int blade) { + int node; int pnode; unsigned long pa; unsigned long apicid; @@ -724,16 +800,17 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) struct bau_payload_queue_entry *pqp; struct bau_control *bau_tablesp; + node = blade_to_first_node(blade); bau_tablesp = uv_table_bases_init(blade, node); pnode = uv_blade_to_pnode(blade); adp = uv_activation_descriptor_init(node, pnode); pqp = uv_payload_queue_init(node, pnode, bau_tablesp); - uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp); + uv_table_bases_finish(blade, bau_tablesp, adp); /* * the below initialization can't be in firmware because the * messaging IRQ will be determined by the OS */ - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + apicid = blade_to_first_apicid(blade); pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); if ((pa & 0xff) != UV_BAU_MESSAGE) { uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, @@ -748,9 +825,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) static int __init uv_bau_init(void) { int blade; - int node; int nblades; - int last_blade; int cur_cpu; if (!is_uv_system()) @@ -763,29 +838,21 @@ static int __init uv_bau_init(void) uv_bau_retry_limit = 1; uv_nshift = uv_hub_info->n_val; uv_mmask = (1UL << uv_hub_info->n_val) - 1; - nblades = 0; - last_blade = -1; - cur_cpu = 0; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - nblades++; - } + nblades = uv_num_possible_blades(); + uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); BUG_ON(!uv_bau_table_bases); - last_blade = -1; - for_each_online_node(node) { - blade = uv_node_to_blade_id(node); - if (blade == last_blade) - continue; - last_blade = blade; - uv_init_blade(blade, node, cur_cpu); - cur_cpu += uv_blade_nr_possible_cpus(blade); - } + uv_partition_base_pnode = 0x7fffffff; + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade) && + (uv_blade_to_pnode(blade) < uv_partition_base_pnode)) + uv_partition_base_pnode = uv_blade_to_pnode(blade); + for (blade = 0; blade < nblades; blade++) + if (uv_blade_nr_possible_cpus(blade)) + uv_init_blade(blade); + alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); uv_enable_timeouts(); |
