diff options
Diffstat (limited to 'arch/x86/kernel/setup_percpu.c')
-rw-r--r-- | arch/x86/kernel/setup_percpu.c | 689 |
1 files changed, 369 insertions, 320 deletions
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 0116107..c29f301 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -7,402 +7,451 @@ #include <linux/crash_dump.h> #include <linux/smp.h> #include <linux/topology.h> +#include <linux/pfn.h> #include <asm/sections.h> #include <asm/processor.h> #include <asm/setup.h> #include <asm/mpspec.h> #include <asm/apicdef.h> #include <asm/highmem.h> +#include <asm/proto.h> +#include <asm/cpumask.h> +#include <asm/cpu.h> +#include <asm/stackprotector.h> -#ifdef CONFIG_X86_LOCAL_APIC -unsigned int num_processors; -unsigned disabled_cpus __cpuinitdata; -/* Processor that is doing the boot up */ -unsigned int boot_cpu_physical_apicid = -1U; -EXPORT_SYMBOL(boot_cpu_physical_apicid); -unsigned int max_physical_apicid; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map; +#ifdef CONFIG_DEBUG_PER_CPU_MAPS +# define DBG(x...) printk(KERN_DEBUG x) +#else +# define DBG(x...) #endif -/* map cpu index to physical APIC ID */ -DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID); -DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) -#define X86_64_NUMA 1 - -/* map cpu index to node index */ -DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); - -/* which logical CPUs are on which nodes */ -cpumask_t *node_to_cpumask_map; -EXPORT_SYMBOL(node_to_cpumask_map); - -/* setup node_to_cpumask_map */ -static void __init setup_node_to_cpumask_map(void); +DEFINE_PER_CPU(int, cpu_number); +EXPORT_PER_CPU_SYMBOL(cpu_number); +#ifdef CONFIG_X86_64 +#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load) #else -static inline void setup_node_to_cpumask_map(void) { } +#define BOOT_PERCPU_OFFSET 0 #endif -#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) -/* - * Copy data used in early init routines from the initial arrays to the - * per cpu data areas. These arrays then become expendable and the - * *_early_ptr's are zeroed indicating that the static arrays are gone. - */ -static void __init setup_per_cpu_maps(void) -{ - int cpu; - - for_each_possible_cpu(cpu) { - per_cpu(x86_cpu_to_apicid, cpu) = - early_per_cpu_map(x86_cpu_to_apicid, cpu); - per_cpu(x86_bios_cpu_apicid, cpu) = - early_per_cpu_map(x86_bios_cpu_apicid, cpu); -#ifdef X86_64_NUMA - per_cpu(x86_cpu_to_node_map, cpu) = - early_per_cpu_map(x86_cpu_to_node_map, cpu); -#endif - } +DEFINE_PER_CPU(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET; +EXPORT_PER_CPU_SYMBOL(this_cpu_off); - /* indicate the early static arrays will soon be gone */ - early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; - early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; -#ifdef X86_64_NUMA - early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; -#endif -} - -#ifdef CONFIG_X86_32 -/* - * Great future not-so-futuristic plan: make i386 and x86_64 do it - * the same way - */ -unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = { + [0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET, +}; EXPORT_SYMBOL(__per_cpu_offset); -static inline void setup_cpu_pda_map(void) { } - -#elif !defined(CONFIG_SMP) -static inline void setup_cpu_pda_map(void) { } -#else /* CONFIG_SMP && CONFIG_X86_64 */ - -/* - * Allocate cpu_pda pointer table and array via alloc_bootmem. +/** + * pcpu_need_numa - determine percpu allocation needs to consider NUMA + * + * If NUMA is not configured or there is only one NUMA node available, + * there is no reason to consider NUMA. This function determines + * whether percpu allocation should consider NUMA or not. + * + * RETURNS: + * true if NUMA should be considered; otherwise, false. */ -static void __init setup_cpu_pda_map(void) +static bool __init pcpu_need_numa(void) { - char *pda; - struct x8664_pda **new_cpu_pda; - unsigned long size; - int cpu; +#ifdef CONFIG_NEED_MULTIPLE_NODES + pg_data_t *last = NULL; + unsigned int cpu; - size = roundup(sizeof(struct x8664_pda), cache_line_size()); + for_each_possible_cpu(cpu) { + int node = early_cpu_to_node(cpu); - /* allocate cpu_pda array and pointer table */ - { - unsigned long tsize = nr_cpu_ids * sizeof(void *); - unsigned long asize = size * (nr_cpu_ids - 1); + if (node_online(node) && NODE_DATA(node) && + last && last != NODE_DATA(node)) + return true; - tsize = roundup(tsize, cache_line_size()); - new_cpu_pda = alloc_bootmem(tsize + asize); - pda = (char *)new_cpu_pda + tsize; + last = NODE_DATA(node); } +#endif + return false; +} - /* initialize pointer table to static pda's */ - for_each_possible_cpu(cpu) { - if (cpu == 0) { - /* leave boot cpu pda in place */ - new_cpu_pda[0] = cpu_pda(0); - continue; - } - new_cpu_pda[cpu] = (struct x8664_pda *)pda; - new_cpu_pda[cpu]->in_bootmem = 1; - pda += size; +/** + * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu + * @cpu: cpu to allocate for + * @size: size allocation in bytes + * @align: alignment + * + * Allocate @size bytes aligned at @align for cpu @cpu. This wrapper + * does the right thing for NUMA regardless of the current + * configuration. + * + * RETURNS: + * Pointer to the allocated area on success, NULL on failure. + */ +static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, + unsigned long align) +{ + const unsigned long goal = __pa(MAX_DMA_ADDRESS); +#ifdef CONFIG_NEED_MULTIPLE_NODES + int node = early_cpu_to_node(cpu); + void *ptr; + + if (!node_online(node) || !NODE_DATA(node)) { + ptr = __alloc_bootmem_nopanic(size, align, goal); + pr_info("cpu %d has no node %d or node-local memory\n", + cpu, node); + pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n", + cpu, size, __pa(ptr)); + } else { + ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node), + size, align, goal); + pr_debug("per cpu data for cpu%d %lu bytes on node%d at " + "%016lx\n", cpu, size, node, __pa(ptr)); } - - /* point to new pointer table */ - _cpu_pda = new_cpu_pda; + return ptr; +#else + return __alloc_bootmem_nopanic(size, align, goal); +#endif } -#endif /* CONFIG_SMP && CONFIG_X86_64 */ - -#ifdef CONFIG_X86_64 +/* + * Remap allocator + * + * This allocator uses PMD page as unit. A PMD page is allocated for + * each cpu and each is remapped into vmalloc area using PMD mapping. + * As PMD page is quite large, only part of it is used for the first + * chunk. Unused part is returned to the bootmem allocator. + * + * So, the PMD pages are mapped twice - once to the physical mapping + * and to the vmalloc area for the first percpu chunk. The double + * mapping does add one more PMD TLB entry pressure but still is much + * better than only using 4k mappings while still being NUMA friendly. + */ +#ifdef CONFIG_NEED_MULTIPLE_NODES +static size_t pcpur_size __initdata; +static void **pcpur_ptrs __initdata; -/* correctly size the local cpu masks */ -static void __init setup_cpu_local_masks(void) +static struct page * __init pcpur_get_page(unsigned int cpu, int pageno) { - alloc_bootmem_cpumask_var(&cpu_initialized_mask); - alloc_bootmem_cpumask_var(&cpu_callin_mask); - alloc_bootmem_cpumask_var(&cpu_callout_mask); - alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); -} + size_t off = (size_t)pageno << PAGE_SHIFT; -#else /* CONFIG_X86_32 */ + if (off >= pcpur_size) + return NULL; -static inline void setup_cpu_local_masks(void) -{ + return virt_to_page(pcpur_ptrs[cpu] + off); } -#endif /* CONFIG_X86_32 */ - -/* - * Great future plan: - * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. - * Always point %gs to its beginning - */ -void __init setup_per_cpu_areas(void) +static ssize_t __init setup_pcpu_remap(size_t static_size) { - ssize_t size, old_size; - char *ptr; - int cpu; - unsigned long align = 1; - - /* Setup cpu_pda map */ - setup_cpu_pda_map(); + static struct vm_struct vm; + pg_data_t *last; + size_t ptrs_size; + unsigned int cpu; + ssize_t ret; + + /* + * If large page isn't supported, there's no benefit in doing + * this. Also, on non-NUMA, embedding is better. + */ + if (!cpu_has_pse || pcpu_need_numa()) + return -EINVAL; + + last = NULL; + for_each_possible_cpu(cpu) { + int node = early_cpu_to_node(cpu); - /* Copy section for each CPU (we discard the original) */ - old_size = PERCPU_ENOUGH_ROOM; - align = max_t(unsigned long, PAGE_SIZE, align); - size = roundup(old_size, align); + if (node_online(node) && NODE_DATA(node) && + last && last != NODE_DATA(node)) + goto proceed; - pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n", - NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids); + last = NODE_DATA(node); + } + return -EINVAL; + +proceed: + /* + * Currently supports only single page. Supporting multiple + * pages won't be too difficult if it ever becomes necessary. + */ + pcpur_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE); + if (pcpur_size > PMD_SIZE) { + pr_warning("PERCPU: static data is larger than large page, " + "can't use large page\n"); + return -EINVAL; + } - pr_info("PERCPU: Allocating %zd bytes of per cpu data\n", size); + /* allocate pointer array and alloc large pages */ + ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0])); + pcpur_ptrs = alloc_bootmem(ptrs_size); for_each_possible_cpu(cpu) { -#ifndef CONFIG_NEED_MULTIPLE_NODES - ptr = __alloc_bootmem(size, align, - __pa(MAX_DMA_ADDRESS)); -#else - int node = early_cpu_to_node(cpu); - if (!node_online(node) || !NODE_DATA(node)) { - ptr = __alloc_bootmem(size, align, - __pa(MAX_DMA_ADDRESS)); - pr_info("cpu %d has no node %d or node-local memory\n", - cpu, node); - pr_debug("per cpu data for cpu%d at %016lx\n", - cpu, __pa(ptr)); - } else { - ptr = __alloc_bootmem_node(NODE_DATA(node), size, align, - __pa(MAX_DMA_ADDRESS)); - pr_debug("per cpu data for cpu%d on node%d at %016lx\n", - cpu, node, __pa(ptr)); - } -#endif - per_cpu_offset(cpu) = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); + pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE); + if (!pcpur_ptrs[cpu]) + goto enomem; + + /* + * Only use pcpur_size bytes and give back the rest. + * + * Ingo: The 2MB up-rounding bootmem is needed to make + * sure the partial 2MB page is still fully RAM - it's + * not well-specified to have a PAT-incompatible area + * (unmapped RAM, device memory, etc.) in that hole. + */ + free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size), + PMD_SIZE - pcpur_size); + + memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size); } - /* Setup percpu data maps */ - setup_per_cpu_maps(); + /* allocate address and map */ + vm.flags = VM_ALLOC; + vm.size = num_possible_cpus() * PMD_SIZE; + vm_area_register_early(&vm, PMD_SIZE); - /* Setup node to cpumask map */ - setup_node_to_cpumask_map(); + for_each_possible_cpu(cpu) { + pmd_t *pmd; - /* Setup cpu initialized, callin, callout masks */ - setup_cpu_local_masks(); -} + pmd = populate_extra_pmd((unsigned long)vm.addr + + cpu * PMD_SIZE); + set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])), + PAGE_KERNEL_LARGE)); + } + /* we're ready, commit */ + pr_info("PERCPU: Remapped at %p with large pages, static data " + "%zu bytes\n", vm.addr, static_size); + + ret = pcpu_setup_first_chunk(pcpur_get_page, static_size, PMD_SIZE, + pcpur_size - static_size, vm.addr, NULL); + goto out_free_ar; + +enomem: + for_each_possible_cpu(cpu) + if (pcpur_ptrs[cpu]) + free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE); + ret = -ENOMEM; +out_free_ar: + free_bootmem(__pa(pcpur_ptrs), ptrs_size); + return ret; +} +#else +static ssize_t __init setup_pcpu_remap(size_t static_size) +{ + return -EINVAL; +} #endif -#ifdef X86_64_NUMA - /* - * Allocate node_to_cpumask_map based on number of available nodes - * Requires node_possible_map to be valid. + * Embedding allocator * - * Note: node_to_cpumask() is not valid until after this is done. + * The first chunk is sized to just contain the static area plus + * PERCPU_DYNAMIC_RESERVE and allocated as a contiguous area using + * bootmem allocator and used as-is without being mapped into vmalloc + * area. This enables the first chunk to piggy back on the linear + * physical PMD mapping and doesn't add any additional pressure to + * TLB. */ -static void __init setup_node_to_cpumask_map(void) -{ - unsigned int node, num = 0; - cpumask_t *map; - - /* setup nr_node_ids if not done yet */ - if (nr_node_ids == MAX_NUMNODES) { - for_each_node_mask(node, node_possible_map) - num = node; - nr_node_ids = num + 1; - } - - /* allocate the map */ - map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t)); - - pr_debug("Node to cpumask map at %p for %d nodes\n", - map, nr_node_ids); - - /* node_to_cpumask() will now work */ - node_to_cpumask_map = map; -} +static void *pcpue_ptr __initdata; +static size_t pcpue_unit_size __initdata; -void __cpuinit numa_set_node(int cpu, int node) +static struct page * __init pcpue_get_page(unsigned int cpu, int pageno) { - int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); - - if (cpu_pda(cpu) && node != NUMA_NO_NODE) - cpu_pda(cpu)->nodenumber = node; - - if (cpu_to_node_map) - cpu_to_node_map[cpu] = node; - - else if (per_cpu_offset(cpu)) - per_cpu(x86_cpu_to_node_map, cpu) = node; - - else - pr_debug("Setting node for non-present cpu %d\n", cpu); + return virt_to_page(pcpue_ptr + cpu * pcpue_unit_size + + ((size_t)pageno << PAGE_SHIFT)); } -void __cpuinit numa_clear_node(int cpu) +static ssize_t __init setup_pcpu_embed(size_t static_size) { - numa_set_node(cpu, NUMA_NO_NODE); + unsigned int cpu; + + /* + * If large page isn't supported, there's no benefit in doing + * this. Also, embedding allocation doesn't play well with + * NUMA. + */ + if (!cpu_has_pse || pcpu_need_numa()) + return -EINVAL; + + /* allocate and copy */ + pcpue_unit_size = PFN_ALIGN(static_size + PERCPU_DYNAMIC_RESERVE); + pcpue_unit_size = max_t(size_t, pcpue_unit_size, PCPU_MIN_UNIT_SIZE); + pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size, + PAGE_SIZE); + if (!pcpue_ptr) + return -ENOMEM; + + for_each_possible_cpu(cpu) + memcpy(pcpue_ptr + cpu * pcpue_unit_size, __per_cpu_load, + static_size); + + /* we're ready, commit */ + pr_info("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n", + pcpue_unit_size >> PAGE_SHIFT, pcpue_ptr, static_size); + + return pcpu_setup_first_chunk(pcpue_get_page, static_size, + pcpue_unit_size, + pcpue_unit_size - static_size, pcpue_ptr, + NULL); } -#ifndef CONFIG_DEBUG_PER_CPU_MAPS +/* + * 4k page allocator + * + * This is the basic allocator. Static percpu area is allocated + * page-by-page and most of initialization is done by the generic + * setup function. + */ +static struct page **pcpu4k_pages __initdata; +static int pcpu4k_nr_static_pages __initdata; -void __cpuinit numa_add_cpu(int cpu) +static struct page * __init pcpu4k_get_page(unsigned int cpu, int pageno) { - cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); + if (pageno < pcpu4k_nr_static_pages) + return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno]; + return NULL; } -void __cpuinit numa_remove_cpu(int cpu) +static void __init pcpu4k_populate_pte(unsigned long addr) { - cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]); + populate_extra_pte(addr); } -#else /* CONFIG_DEBUG_PER_CPU_MAPS */ - -/* - * --------- debug versions of the numa functions --------- - */ -static void __cpuinit numa_set_cpumask(int cpu, int enable) +static ssize_t __init setup_pcpu_4k(size_t static_size) { - int node = cpu_to_node(cpu); - cpumask_t *mask; - char buf[64]; - - if (node_to_cpumask_map == NULL) { - printk(KERN_ERR "node_to_cpumask_map NULL\n"); - dump_stack(); - return; - } - - mask = &node_to_cpumask_map[node]; - if (enable) - cpu_set(cpu, *mask); - else - cpu_clear(cpu, *mask); - - cpulist_scnprintf(buf, sizeof(buf), mask); - printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", - enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf); -} + size_t pages_size; + unsigned int cpu; + int i, j; + ssize_t ret; + + pcpu4k_nr_static_pages = PFN_UP(static_size); + + /* unaligned allocations can't be freed, round up to page size */ + pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus() + * sizeof(pcpu4k_pages[0])); + pcpu4k_pages = alloc_bootmem(pages_size); + + /* allocate and copy */ + j = 0; + for_each_possible_cpu(cpu) + for (i = 0; i < pcpu4k_nr_static_pages; i++) { + void *ptr; + + ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE); + if (!ptr) + goto enomem; + + memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE); + pcpu4k_pages[j++] = virt_to_page(ptr); + } -void __cpuinit numa_add_cpu(int cpu) -{ - numa_set_cpumask(cpu, 1); + /* we're ready, commit */ + pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n", + pcpu4k_nr_static_pages, static_size); + + ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size, 0, 0, NULL, + pcpu4k_populate_pte); + goto out_free_ar; + +enomem: + while (--j >= 0) + free_bootmem(__pa(page_address(pcpu4k_pages[j])), PAGE_SIZE); + ret = -ENOMEM; +out_free_ar: + free_bootmem(__pa(pcpu4k_pages), pages_size); + return ret; } -void __cpuinit numa_remove_cpu(int cpu) +static inline void setup_percpu_segment(int cpu) { - numa_set_cpumask(cpu, 0); -} +#ifdef CONFIG_X86_32 + struct desc_struct gdt; -int cpu_to_node(int cpu) -{ - if (early_per_cpu_ptr(x86_cpu_to_node_map)) { - printk(KERN_WARNING - "cpu_to_node(%d): usage too early!\n", cpu); - dump_stack(); - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - } - return per_cpu(x86_cpu_to_node_map, cpu); + pack_descriptor(&gdt, per_cpu_offset(cpu), 0xFFFFF, + 0x2 | DESCTYPE_S, 0x8); + gdt.s = 1; + write_gdt_entry(get_cpu_gdt_table(cpu), + GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S); +#endif } -EXPORT_SYMBOL(cpu_to_node); /* - * Same function as cpu_to_node() but used if called before the - * per_cpu areas are setup. + * Great future plan: + * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. + * Always point %gs to its beginning */ -int early_cpu_to_node(int cpu) +void __init setup_per_cpu_areas(void) { - if (early_per_cpu_ptr(x86_cpu_to_node_map)) - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - - if (!per_cpu_offset(cpu)) { - printk(KERN_WARNING - "early_cpu_to_node(%d): no per_cpu area!\n", cpu); - dump_stack(); - return NUMA_NO_NODE; - } - return per_cpu(x86_cpu_to_node_map, cpu); -} - + size_t static_size = __per_cpu_end - __per_cpu_start; + unsigned int cpu; + unsigned long delta; + size_t pcpu_unit_size; + ssize_t ret; -/* empty cpumask */ -static const cpumask_t cpu_mask_none; - -/* - * Returns a pointer to the bitmask of CPUs on Node 'node'. - */ -const cpumask_t *cpumask_of_node(int node) -{ - if (node_to_cpumask_map == NULL) { - printk(KERN_WARNING - "cpumask_of_node(%d): no node_to_cpumask_map!\n", - node); - dump_stack(); - return (const cpumask_t *)&cpu_online_map; - } - if (node >= nr_node_ids) { - printk(KERN_WARNING - "cpumask_of_node(%d): node > nr_node_ids(%d)\n", - node, nr_node_ids); - dump_stack(); - return &cpu_mask_none; - } - return &node_to_cpumask_map[node]; -} -EXPORT_SYMBOL(cpumask_of_node); + pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n", + NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids); -/* - * Returns a bitmask of CPUs on Node 'node'. - * - * Side note: this function creates the returned cpumask on the stack - * so with a high NR_CPUS count, excessive stack space is used. The - * node_to_cpumask_ptr function should be used whenever possible. - */ -cpumask_t node_to_cpumask(int node) -{ - if (node_to_cpumask_map == NULL) { - printk(KERN_WARNING - "node_to_cpumask(%d): no node_to_cpumask_map!\n", node); - dump_stack(); - return cpu_online_map; - } - if (node >= nr_node_ids) { - printk(KERN_WARNING - "node_to_cpumask(%d): node > nr_node_ids(%d)\n", - node, nr_node_ids); - dump_stack(); - return cpu_mask_none; + /* + * Allocate percpu area. If PSE is supported, try to make use + * of large page mappings. Please read comments on top of + * each allocator for details. + */ + ret = setup_pcpu_remap(static_size); + if (ret < 0) + ret = setup_pcpu_embed(static_size); + if (ret < 0) + ret = setup_pcpu_4k(static_size); + if (ret < 0) + panic("cannot allocate static percpu area (%zu bytes, err=%zd)", + static_size, ret); + + pcpu_unit_size = ret; + + /* alrighty, percpu areas up and running */ + delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; + for_each_possible_cpu(cpu) { + per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size; + per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu); + per_cpu(cpu_number, cpu) = cpu; + setup_percpu_segment(cpu); + setup_stack_canary_segment(cpu); + /* + * Copy data used in early init routines from the + * initial arrays to the per cpu data areas. These + * arrays then become expendable and the *_early_ptr's + * are zeroed indicating that the static arrays are + * gone. + */ +#ifdef CONFIG_X86_LOCAL_APIC + per_cpu(x86_cpu_to_apicid, cpu) = + early_per_cpu_map(x86_cpu_to_apicid, cpu); + per_cpu(x86_bios_cpu_apicid, cpu) = + early_per_cpu_map(x86_bios_cpu_apicid, cpu); +#endif +#ifdef CONFIG_X86_64 + per_cpu(irq_stack_ptr, cpu) = + per_cpu(irq_stack_union.irq_stack, cpu) + + IRQ_STACK_SIZE - 64; +#ifdef CONFIG_NUMA + per_cpu(x86_cpu_to_node_map, cpu) = + early_per_cpu_map(x86_cpu_to_node_map, cpu); +#endif +#endif + /* + * Up to this point, the boot CPU has been using .data.init + * area. Reload any changed state for the boot CPU. + */ + if (cpu == boot_cpu_id) + switch_to_new_gdt(cpu); } - return node_to_cpumask_map[node]; -} -EXPORT_SYMBOL(node_to_cpumask); - -/* - * --------- end of debug versions of the numa functions --------- - */ -#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ + /* indicate the early static arrays will soon be gone */ +#ifdef CONFIG_X86_LOCAL_APIC + early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; + early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; +#endif +#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA) + early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; +#endif -#endif /* X86_64_NUMA */ + /* Setup node to cpumask map */ + setup_node_to_cpumask_map(); + /* Setup cpu initialized, callin, callout masks */ + setup_cpu_local_masks(); +} |