summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/process.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/process.c')
-rw-r--r--arch/x86/kernel/process.c234
1 files changed, 214 insertions, 20 deletions
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index ba370dc..c622772 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -6,6 +6,13 @@
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/clockchips.h>
+#include <asm/system.h>
+
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
struct kmem_cache *task_xstate_cachep;
@@ -45,6 +52,76 @@ void arch_task_cache_init(void)
SLAB_PANIC, NULL);
}
+/*
+ * Idle related variables and functions
+ */
+unsigned long boot_option_idle_override = 0;
+EXPORT_SYMBOL(boot_option_idle_override);
+
+/*
+ * Powermanagement idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+#ifdef CONFIG_X86_32
+/*
+ * This halt magic was a workaround for ancient floppy DMA
+ * wreckage. It should be safe to remove.
+ */
+static int hlt_counter;
+void disable_hlt(void)
+{
+ hlt_counter++;
+}
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+ hlt_counter--;
+}
+EXPORT_SYMBOL(enable_hlt);
+
+static inline int hlt_use_halt(void)
+{
+ return (!hlt_counter && boot_cpu_data.hlt_works_ok);
+}
+#else
+static inline int hlt_use_halt(void)
+{
+ return 1;
+}
+#endif
+
+/*
+ * We use this if we don't have any better
+ * idle routine..
+ */
+void default_idle(void)
+{
+ if (hlt_use_halt()) {
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
+
+ if (!need_resched())
+ safe_halt(); /* enables interrupts racelessly */
+ else
+ local_irq_enable();
+ current_thread_info()->status |= TS_POLLING;
+ } else {
+ local_irq_enable();
+ /* loop is done by the caller */
+ cpu_relax();
+ }
+}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(default_idle);
+#endif
+
static void do_nothing(void *unused)
{
}
@@ -61,7 +138,7 @@ void cpu_idle_wait(void)
{
smp_mb();
/* kick all the CPUs so that they exit out of pm_idle */
- smp_call_function(do_nothing, NULL, 0, 1);
+ smp_call_function(do_nothing, NULL, 1);
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
@@ -107,7 +184,8 @@ static void mwait_idle(void)
static void poll_idle(void)
{
local_irq_enable();
- cpu_relax();
+ while (!need_resched())
+ cpu_relax();
}
/*
@@ -122,54 +200,170 @@ static void poll_idle(void)
*
* idle=mwait overrides this decision and forces the usage of mwait.
*/
+static int __cpuinitdata force_mwait;
+
+#define MWAIT_INFO 0x05
+#define MWAIT_ECX_EXTENDED_INFO 0x01
+#define MWAIT_EDX_C1 0xf0
+
static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
{
+ u32 eax, ebx, ecx, edx;
+
if (force_mwait)
return 1;
- if (c->x86_vendor == X86_VENDOR_AMD) {
- switch(c->x86) {
- case 0x10:
- case 0x11:
- return 0;
- }
- }
+ if (c->cpuid_level < MWAIT_INFO)
+ return 0;
+
+ cpuid(MWAIT_INFO, &eax, &ebx, &ecx, &edx);
+ /* Check, whether EDX has extended info about MWAIT */
+ if (!(ecx & MWAIT_ECX_EXTENDED_INFO))
+ return 1;
+
+ /*
+ * edx enumeratios MONITOR/MWAIT extensions. Check, whether
+ * C1 supports MWAIT
+ */
+ return (edx & MWAIT_EDX_C1);
+}
+
+/*
+ * Check for AMD CPUs, which have potentially C1E support
+ */
+static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
+{
+ if (c->x86_vendor != X86_VENDOR_AMD)
+ return 0;
+
+ if (c->x86 < 0x0F)
+ return 0;
+
+ /* Family 0x0f models < rev F do not have C1E */
+ if (c->x86 == 0x0f && c->x86_model < 0x40)
+ return 0;
+
return 1;
}
-void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+static cpumask_t c1e_mask = CPU_MASK_NONE;
+static int c1e_detected;
+
+void c1e_remove_cpu(int cpu)
{
- static int selected;
+ cpu_clear(cpu, c1e_mask);
+}
- if (selected)
+/*
+ * C1E aware idle routine. We check for C1E active in the interrupt
+ * pending message MSR. If we detect C1E, then we handle it the same
+ * way as C3 power states (local apic timer and TSC stop)
+ */
+static void c1e_idle(void)
+{
+ if (need_resched())
return;
+
+ if (!c1e_detected) {
+ u32 lo, hi;
+
+ rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+ if (lo & K8_INTP_C1E_ACTIVE_MASK) {
+ c1e_detected = 1;
+ if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ mark_tsc_unstable("TSC halt in AMD C1E");
+ printk(KERN_INFO "System has AMD C1E enabled\n");
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
+ }
+ }
+
+ if (c1e_detected) {
+ int cpu = smp_processor_id();
+
+ if (!cpu_isset(cpu, c1e_mask)) {
+ cpu_set(cpu, c1e_mask);
+ /*
+ * Force broadcast so ACPI can not interfere. Needs
+ * to run with interrupts enabled as it uses
+ * smp_function_call.
+ */
+ local_irq_enable();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
+ &cpu);
+ printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
+ cpu);
+ local_irq_disable();
+ }
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
+
+ default_idle();
+
+ /*
+ * The switch back from broadcast mode needs to be
+ * called with interrupts disabled.
+ */
+ local_irq_disable();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+ local_irq_enable();
+ } else
+ default_idle();
+}
+
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
+{
#ifdef CONFIG_X86_SMP
if (pm_idle == poll_idle && smp_num_siblings > 1) {
printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
" performance may degrade.\n");
}
#endif
+ if (pm_idle)
+ return;
+
if (cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)) {
/*
- * Skip, if setup has overridden idle.
* One CPU supports mwait => All CPUs supports mwait
*/
- if (!pm_idle) {
- printk(KERN_INFO "using mwait in idle threads.\n");
- pm_idle = mwait_idle;
- }
- }
- selected = 1;
+ printk(KERN_INFO "using mwait in idle threads.\n");
+ pm_idle = mwait_idle;
+ } else if (check_c1e_idle(c)) {
+ printk(KERN_INFO "using C1E aware idle routine\n");
+ pm_idle = c1e_idle;
+ } else
+ pm_idle = default_idle;
}
static int __init idle_setup(char *str)
{
+ if (!str)
+ return -EINVAL;
+
if (!strcmp(str, "poll")) {
printk("using polling idle threads.\n");
pm_idle = poll_idle;
} else if (!strcmp(str, "mwait"))
force_mwait = 1;
- else
+ else if (!strcmp(str, "halt")) {
+ /*
+ * When the boot option of idle=halt is added, halt is
+ * forced to be used for CPU idle. In such case CPU C2/C3
+ * won't be used again.
+ * To continue to load the CPU idle driver, don't touch
+ * the boot_option_idle_override.
+ */
+ pm_idle = default_idle;
+ idle_halt = 1;
+ return 0;
+ } else if (!strcmp(str, "nomwait")) {
+ /*
+ * If the boot option of "idle=nomwait" is added,
+ * it means that mwait will be disabled for CPU C2/C3
+ * states. In such case it won't touch the variable
+ * of boot_option_idle_override.
+ */
+ idle_nomwait = 1;
+ return 0;
+ } else
return -1;
boot_option_idle_override = 1;
OpenPOWER on IntegriCloud