diff options
Diffstat (limited to 'arch/x86/kernel/entry_32.S')
| -rw-r--r-- | arch/x86/kernel/entry_32.S | 476 |
1 files changed, 248 insertions, 228 deletions
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index f6402c4..fe70141 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -619,28 +619,37 @@ END(syscall_badsys) 27:; /* - * Build the entry stubs and pointer table with - * some assembler magic. + * Build the entry stubs and pointer table with some assembler magic. + * We pack 7 stubs into a single 32-byte chunk, which will fit in a + * single cache line on all modern x86 implementations. */ -.section .rodata,"a" +.section .init.rodata,"a" ENTRY(interrupt) .text - + .p2align 5 + .p2align CONFIG_X86_L1_CACHE_SHIFT ENTRY(irq_entries_start) RING0_INT_FRAME -vector=0 -.rept NR_VECTORS - ALIGN - .if vector +vector=FIRST_EXTERNAL_VECTOR +.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7 + .balign 32 + .rept 7 + .if vector < NR_VECTORS + .if vector <> FIRST_EXTERNAL_VECTOR CFI_ADJUST_CFA_OFFSET -4 - .endif -1: pushl $~(vector) + .endif +1: pushl $(~vector+0x80) /* Note: always in signed byte range */ CFI_ADJUST_CFA_OFFSET 4 - jmp common_interrupt - .previous + .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6 + jmp 2f + .endif + .previous .long 1b - .text + .text vector=vector+1 + .endif + .endr +2: jmp common_interrupt .endr END(irq_entries_start) @@ -652,8 +661,9 @@ END(interrupt) * the CPU automatically disables interrupts when executing an IRQ vector, * so IRQ-flags tracing has to follow that: */ - ALIGN + .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: + addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */ SAVE_ALL TRACE_IRQS_OFF movl %esp,%eax @@ -678,65 +688,6 @@ ENDPROC(name) /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" -KPROBE_ENTRY(page_fault) - RING0_EC_FRAME - pushl $do_page_fault - CFI_ADJUST_CFA_OFFSET 4 - ALIGN -error_code: - /* the function address is in %fs's slot on the stack */ - pushl %es - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET es, 0*/ - pushl %ds - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET ds, 0*/ - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET eax, 0 - pushl %ebp - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ebp, 0 - pushl %edi - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET edi, 0 - pushl %esi - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET esi, 0 - pushl %edx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET edx, 0 - pushl %ecx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ecx, 0 - pushl %ebx - CFI_ADJUST_CFA_OFFSET 4 - CFI_REL_OFFSET ebx, 0 - cld - pushl %fs - CFI_ADJUST_CFA_OFFSET 4 - /*CFI_REL_OFFSET fs, 0*/ - movl $(__KERNEL_PERCPU), %ecx - movl %ecx, %fs - UNWIND_ESPFIX_STACK - popl %ecx - CFI_ADJUST_CFA_OFFSET -4 - /*CFI_REGISTER es, ecx*/ - movl PT_FS(%esp), %edi # get the function address - movl PT_ORIG_EAX(%esp), %edx # get the error code - movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart - mov %ecx, PT_FS(%esp) - /*CFI_REL_OFFSET fs, ES*/ - movl $(__USER_DS), %ecx - movl %ecx, %ds - movl %ecx, %es - TRACE_IRQS_OFF - movl %esp,%eax # pt_regs pointer - call *%edi - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(page_fault) - ENTRY(coprocessor_error) RING0_INT_FRAME pushl $0 @@ -767,140 +718,6 @@ ENTRY(device_not_available) CFI_ENDPROC END(device_not_available) -/* - * Debug traps and NMI can happen at the one SYSENTER instruction - * that sets up the real kernel stack. Check here, since we can't - * allow the wrong stack to be used. - * - * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have - * already pushed 3 words if it hits on the sysenter instruction: - * eflags, cs and eip. - * - * We just load the right stack, and push the three (known) values - * by hand onto the new stack - while updating the return eip past - * the instruction that would have done it for sysenter. - */ -#define FIX_STACK(offset, ok, label) \ - cmpw $__KERNEL_CS,4(%esp); \ - jne ok; \ -label: \ - movl TSS_sysenter_sp0+offset(%esp),%esp; \ - CFI_DEF_CFA esp, 0; \ - CFI_UNDEFINED eip; \ - pushfl; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl $__KERNEL_CS; \ - CFI_ADJUST_CFA_OFFSET 4; \ - pushl $sysenter_past_esp; \ - CFI_ADJUST_CFA_OFFSET 4; \ - CFI_REL_OFFSET eip, 0 - -KPROBE_ENTRY(debug) - RING0_INT_FRAME - cmpl $ia32_sysenter_target,(%esp) - jne debug_stack_correct - FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) -debug_stack_correct: - pushl $-1 # mark this as an int - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - TRACE_IRQS_OFF - xorl %edx,%edx # error code 0 - movl %esp,%eax # pt_regs pointer - call do_debug - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(debug) - -/* - * NMI is doubly nasty. It can happen _while_ we're handling - * a debug fault, and the debug fault hasn't yet been able to - * clear up the stack. So we first check whether we got an - * NMI on the sysenter entry path, but after that we need to - * check whether we got an NMI on the debug path where the debug - * fault happened on the sysenter path. - */ -KPROBE_ENTRY(nmi) - RING0_INT_FRAME - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl %ss, %eax - cmpw $__ESPFIX_SS, %ax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - je nmi_espfix_stack - cmpl $ia32_sysenter_target,(%esp) - je nmi_stack_fixup - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - movl %esp,%eax - /* Do not access memory above the end of our stack page, - * it might not exist. - */ - andl $(THREAD_SIZE-1),%eax - cmpl $(THREAD_SIZE-20),%eax - popl %eax - CFI_ADJUST_CFA_OFFSET -4 - jae nmi_stack_correct - cmpl $ia32_sysenter_target,12(%esp) - je nmi_debug_stack_check -nmi_stack_correct: - /* We have a RING0_INT_FRAME here */ - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - TRACE_IRQS_OFF - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_nmi - jmp restore_nocheck_notrace - CFI_ENDPROC - -nmi_stack_fixup: - RING0_INT_FRAME - FIX_STACK(12,nmi_stack_correct, 1) - jmp nmi_stack_correct - -nmi_debug_stack_check: - /* We have a RING0_INT_FRAME here */ - cmpw $__KERNEL_CS,16(%esp) - jne nmi_stack_correct - cmpl $debug,(%esp) - jb nmi_stack_correct - cmpl $debug_esp_fix_insn,(%esp) - ja nmi_stack_correct - FIX_STACK(24,nmi_stack_correct, 1) - jmp nmi_stack_correct - -nmi_espfix_stack: - /* We have a RING0_INT_FRAME here. - * - * create the pointer to lss back - */ - pushl %ss - CFI_ADJUST_CFA_OFFSET 4 - pushl %esp - CFI_ADJUST_CFA_OFFSET 4 - addw $4, (%esp) - /* copy the iret frame of 12 bytes */ - .rept 3 - pushl 16(%esp) - CFI_ADJUST_CFA_OFFSET 4 - .endr - pushl %eax - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - TRACE_IRQS_OFF - FIXUP_ESPFIX_STACK # %eax == %esp - xorl %edx,%edx # zero error code - call do_nmi - RESTORE_REGS - lss 12+4(%esp), %esp # back to espfix stack - CFI_ADJUST_CFA_OFFSET -24 - jmp irq_return - CFI_ENDPROC -KPROBE_END(nmi) - #ifdef CONFIG_PARAVIRT ENTRY(native_iret) iret @@ -916,19 +733,6 @@ ENTRY(native_irq_enable_sysexit) END(native_irq_enable_sysexit) #endif -KPROBE_ENTRY(int3) - RING0_INT_FRAME - pushl $-1 # mark this as an int - CFI_ADJUST_CFA_OFFSET 4 - SAVE_ALL - TRACE_IRQS_OFF - xorl %edx,%edx # zero error code - movl %esp,%eax # pt_regs pointer - call do_int3 - jmp ret_from_exception - CFI_ENDPROC -KPROBE_END(int3) - ENTRY(overflow) RING0_INT_FRAME pushl $0 @@ -993,14 +797,6 @@ ENTRY(stack_segment) CFI_ENDPROC END(stack_segment) -KPROBE_ENTRY(general_protection) - RING0_EC_FRAME - pushl $do_general_protection - CFI_ADJUST_CFA_OFFSET 4 - jmp error_code - CFI_ENDPROC -KPROBE_END(general_protection) - ENTRY(alignment_check) RING0_EC_FRAME pushl $do_alignment_check @@ -1211,3 +1007,227 @@ END(mcount) #include "syscall_table_32.S" syscall_table_size=(.-sys_call_table) + +/* + * Some functions should be protected against kprobes + */ + .pushsection .kprobes.text, "ax" + +ENTRY(page_fault) + RING0_EC_FRAME + pushl $do_page_fault + CFI_ADJUST_CFA_OFFSET 4 + ALIGN +error_code: + /* the function address is in %fs's slot on the stack */ + pushl %es + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET es, 0*/ + pushl %ds + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET ds, 0*/ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET eax, 0 + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 + pushl %edi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edi, 0 + pushl %esi + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET esi, 0 + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 + pushl %ebx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebx, 0 + cld + pushl %fs + CFI_ADJUST_CFA_OFFSET 4 + /*CFI_REL_OFFSET fs, 0*/ + movl $(__KERNEL_PERCPU), %ecx + movl %ecx, %fs + UNWIND_ESPFIX_STACK + popl %ecx + CFI_ADJUST_CFA_OFFSET -4 + /*CFI_REGISTER es, ecx*/ + movl PT_FS(%esp), %edi # get the function address + movl PT_ORIG_EAX(%esp), %edx # get the error code + movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart + mov %ecx, PT_FS(%esp) + /*CFI_REL_OFFSET fs, ES*/ + movl $(__USER_DS), %ecx + movl %ecx, %ds + movl %ecx, %es + TRACE_IRQS_OFF + movl %esp,%eax # pt_regs pointer + call *%edi + jmp ret_from_exception + CFI_ENDPROC +END(page_fault) + +/* + * Debug traps and NMI can happen at the one SYSENTER instruction + * that sets up the real kernel stack. Check here, since we can't + * allow the wrong stack to be used. + * + * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have + * already pushed 3 words if it hits on the sysenter instruction: + * eflags, cs and eip. + * + * We just load the right stack, and push the three (known) values + * by hand onto the new stack - while updating the return eip past + * the instruction that would have done it for sysenter. + */ +#define FIX_STACK(offset, ok, label) \ + cmpw $__KERNEL_CS,4(%esp); \ + jne ok; \ +label: \ + movl TSS_sysenter_sp0+offset(%esp),%esp; \ + CFI_DEF_CFA esp, 0; \ + CFI_UNDEFINED eip; \ + pushfl; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $__KERNEL_CS; \ + CFI_ADJUST_CFA_OFFSET 4; \ + pushl $sysenter_past_esp; \ + CFI_ADJUST_CFA_OFFSET 4; \ + CFI_REL_OFFSET eip, 0 + +ENTRY(debug) + RING0_INT_FRAME + cmpl $ia32_sysenter_target,(%esp) + jne debug_stack_correct + FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn) +debug_stack_correct: + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + xorl %edx,%edx # error code 0 + movl %esp,%eax # pt_regs pointer + call do_debug + jmp ret_from_exception + CFI_ENDPROC +END(debug) + +/* + * NMI is doubly nasty. It can happen _while_ we're handling + * a debug fault, and the debug fault hasn't yet been able to + * clear up the stack. So we first check whether we got an + * NMI on the sysenter entry path, but after that we need to + * check whether we got an NMI on the debug path where the debug + * fault happened on the sysenter path. + */ +ENTRY(nmi) + RING0_INT_FRAME + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %ss, %eax + cmpw $__ESPFIX_SS, %ax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + je nmi_espfix_stack + cmpl $ia32_sysenter_target,(%esp) + je nmi_stack_fixup + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + movl %esp,%eax + /* Do not access memory above the end of our stack page, + * it might not exist. + */ + andl $(THREAD_SIZE-1),%eax + cmpl $(THREAD_SIZE-20),%eax + popl %eax + CFI_ADJUST_CFA_OFFSET -4 + jae nmi_stack_correct + cmpl $ia32_sysenter_target,12(%esp) + je nmi_debug_stack_check +nmi_stack_correct: + /* We have a RING0_INT_FRAME here */ + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_nmi + jmp restore_nocheck_notrace + CFI_ENDPROC + +nmi_stack_fixup: + RING0_INT_FRAME + FIX_STACK(12,nmi_stack_correct, 1) + jmp nmi_stack_correct + +nmi_debug_stack_check: + /* We have a RING0_INT_FRAME here */ + cmpw $__KERNEL_CS,16(%esp) + jne nmi_stack_correct + cmpl $debug,(%esp) + jb nmi_stack_correct + cmpl $debug_esp_fix_insn,(%esp) + ja nmi_stack_correct + FIX_STACK(24,nmi_stack_correct, 1) + jmp nmi_stack_correct + +nmi_espfix_stack: + /* We have a RING0_INT_FRAME here. + * + * create the pointer to lss back + */ + pushl %ss + CFI_ADJUST_CFA_OFFSET 4 + pushl %esp + CFI_ADJUST_CFA_OFFSET 4 + addw $4, (%esp) + /* copy the iret frame of 12 bytes */ + .rept 3 + pushl 16(%esp) + CFI_ADJUST_CFA_OFFSET 4 + .endr + pushl %eax + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + FIXUP_ESPFIX_STACK # %eax == %esp + xorl %edx,%edx # zero error code + call do_nmi + RESTORE_REGS + lss 12+4(%esp), %esp # back to espfix stack + CFI_ADJUST_CFA_OFFSET -24 + jmp irq_return + CFI_ENDPROC +END(nmi) + +ENTRY(int3) + RING0_INT_FRAME + pushl $-1 # mark this as an int + CFI_ADJUST_CFA_OFFSET 4 + SAVE_ALL + TRACE_IRQS_OFF + xorl %edx,%edx # zero error code + movl %esp,%eax # pt_regs pointer + call do_int3 + jmp ret_from_exception + CFI_ENDPROC +END(int3) + +ENTRY(general_protection) + RING0_EC_FRAME + pushl $do_general_protection + CFI_ADJUST_CFA_OFFSET 4 + jmp error_code + CFI_ENDPROC +END(general_protection) + +/* + * End of kprobes section + */ + .popsection |
