1 files changed, 38 insertions, 747 deletions

diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 335f049..41fd965 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -160,721 +160,6 @@ static struct console early_serial_console = {
 	.index =	-1,
 };
 
-#ifdef CONFIG_EARLY_PRINTK_DBGP
-
-static struct ehci_caps __iomem *ehci_caps;
-static struct ehci_regs __iomem *ehci_regs;
-static struct ehci_dbg_port __iomem *ehci_debug;
-static unsigned int dbgp_endpoint_out;
-
-struct ehci_dev {
-	u32 bus;
-	u32 slot;
-	u32 func;
-};
-
-static struct ehci_dev ehci_dev;
-
-#define USB_DEBUG_DEVNUM 127
-
-#define DBGP_DATA_TOGGLE	0x8800
-
-static inline u32 dbgp_pid_update(u32 x, u32 tok)
-{
-	return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
-}
-
-static inline u32 dbgp_len_update(u32 x, u32 len)
-{
-	return (x & ~0x0f) | (len & 0x0f);
-}
-
-/*
- * USB Packet IDs (PIDs)
- */
-
-/* token */
-#define USB_PID_OUT		0xe1
-#define USB_PID_IN		0x69
-#define USB_PID_SOF		0xa5
-#define USB_PID_SETUP		0x2d
-/* handshake */
-#define USB_PID_ACK		0xd2
-#define USB_PID_NAK		0x5a
-#define USB_PID_STALL		0x1e
-#define USB_PID_NYET		0x96
-/* data */
-#define USB_PID_DATA0		0xc3
-#define USB_PID_DATA1		0x4b
-#define USB_PID_DATA2		0x87
-#define USB_PID_MDATA		0x0f
-/* Special */
-#define USB_PID_PREAMBLE	0x3c
-#define USB_PID_ERR		0x3c
-#define USB_PID_SPLIT		0x78
-#define USB_PID_PING		0xb4
-#define USB_PID_UNDEF_0		0xf0
-
-#define USB_PID_DATA_TOGGLE	0x88
-#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
-
-#define PCI_CAP_ID_EHCI_DEBUG	0xa
-
-#define HUB_ROOT_RESET_TIME	50	/* times are in msec */
-#define HUB_SHORT_RESET_TIME	10
-#define HUB_LONG_RESET_TIME	200
-#define HUB_RESET_TIMEOUT	500
-
-#define DBGP_MAX_PACKET		8
-
-static int dbgp_wait_until_complete(void)
-{
-	u32 ctrl;
-	int loop = 0x100000;
-
-	do {
-		ctrl = readl(&ehci_debug->control);
-		/* Stop when the transaction is finished */
-		if (ctrl & DBGP_DONE)
-			break;
-	} while (--loop > 0);
-
-	if (!loop)
-		return -1;
-
-	/*
-	 * Now that we have observed the completed transaction,
-	 * clear the done bit.
-	 */
-	writel(ctrl | DBGP_DONE, &ehci_debug->control);
-	return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
-}
-
-static void __init dbgp_mdelay(int ms)
-{
-	int i;
-
-	while (ms--) {
-		for (i = 0; i < 1000; i++)
-			outb(0x1, 0x80);
-	}
-}
-
-static void dbgp_breath(void)
-{
-	/* Sleep to give the debug port a chance to breathe */
-}
-
-static int dbgp_wait_until_done(unsigned ctrl)
-{
-	u32 pids, lpid;
-	int ret;
-	int loop = 3;
-
-retry:
-	writel(ctrl | DBGP_GO, &ehci_debug->control);
-	ret = dbgp_wait_until_complete();
-	pids = readl(&ehci_debug->pids);
-	lpid = DBGP_PID_GET(pids);
-
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * If the port is getting full or it has dropped data
-	 * start pacing ourselves, not necessary but it's friendly.
-	 */
-	if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
-		dbgp_breath();
-
-	/* If I get a NACK reissue the transmission */
-	if (lpid == USB_PID_NAK) {
-		if (--loop > 0)
-			goto retry;
-	}
-
-	return ret;
-}
-
-static void dbgp_set_data(const void *buf, int size)
-{
-	const unsigned char *bytes = buf;
-	u32 lo, hi;
-	int i;
-
-	lo = hi = 0;
-	for (i = 0; i < 4 && i < size; i++)
-		lo |= bytes[i] << (8*i);
-	for (; i < 8 && i < size; i++)
-		hi |= bytes[i] << (8*(i - 4));
-	writel(lo, &ehci_debug->data03);
-	writel(hi, &ehci_debug->data47);
-}
-
-static void __init dbgp_get_data(void *buf, int size)
-{
-	unsigned char *bytes = buf;
-	u32 lo, hi;
-	int i;
-
-	lo = readl(&ehci_debug->data03);
-	hi = readl(&ehci_debug->data47);
-	for (i = 0; i < 4 && i < size; i++)
-		bytes[i] = (lo >> (8*i)) & 0xff;
-	for (; i < 8 && i < size; i++)
-		bytes[i] = (hi >> (8*(i - 4))) & 0xff;
-}
-
-static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
-			 const char *bytes, int size)
-{
-	u32 pids, addr, ctrl;
-	int ret;
-
-	if (size > DBGP_MAX_PACKET)
-		return -1;
-
-	addr = DBGP_EPADDR(devnum, endpoint);
-
-	pids = readl(&ehci_debug->pids);
-	pids = dbgp_pid_update(pids, USB_PID_OUT);
-
-	ctrl = readl(&ehci_debug->control);
-	ctrl = dbgp_len_update(ctrl, size);
-	ctrl |= DBGP_OUT;
-	ctrl |= DBGP_GO;
-
-	dbgp_set_data(bytes, size);
-	writel(addr, &ehci_debug->address);
-	writel(pids, &ehci_debug->pids);
-
-	ret = dbgp_wait_until_done(ctrl);
-	if (ret < 0)
-		return ret;
-
-	return ret;
-}
-
-static int __init dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
-				 int size)
-{
-	u32 pids, addr, ctrl;
-	int ret;
-
-	if (size > DBGP_MAX_PACKET)
-		return -1;
-
-	addr = DBGP_EPADDR(devnum, endpoint);
-
-	pids = readl(&ehci_debug->pids);
-	pids = dbgp_pid_update(pids, USB_PID_IN);
-
-	ctrl = readl(&ehci_debug->control);
-	ctrl = dbgp_len_update(ctrl, size);
-	ctrl &= ~DBGP_OUT;
-	ctrl |= DBGP_GO;
-
-	writel(addr, &ehci_debug->address);
-	writel(pids, &ehci_debug->pids);
-	ret = dbgp_wait_until_done(ctrl);
-	if (ret < 0)
-		return ret;
-
-	if (size > ret)
-		size = ret;
-	dbgp_get_data(data, size);
-	return ret;
-}
-
-static int __init dbgp_control_msg(unsigned devnum, int requesttype,
-	int request, int value, int index, void *data, int size)
-{
-	u32 pids, addr, ctrl;
-	struct usb_ctrlrequest req;
-	int read;
-	int ret;
-
-	read = (requesttype & USB_DIR_IN) != 0;
-	if (size > (read ? DBGP_MAX_PACKET:0))
-		return -1;
-
-	/* Compute the control message */
-	req.bRequestType = requesttype;
-	req.bRequest = request;
-	req.wValue = cpu_to_le16(value);
-	req.wIndex = cpu_to_le16(index);
-	req.wLength = cpu_to_le16(size);
-
-	pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
-	addr = DBGP_EPADDR(devnum, 0);
-
-	ctrl = readl(&ehci_debug->control);
-	ctrl = dbgp_len_update(ctrl, sizeof(req));
-	ctrl |= DBGP_OUT;
-	ctrl |= DBGP_GO;
-
-	/* Send the setup message */
-	dbgp_set_data(&req, sizeof(req));
-	writel(addr, &ehci_debug->address);
-	writel(pids, &ehci_debug->pids);
-	ret = dbgp_wait_until_done(ctrl);
-	if (ret < 0)
-		return ret;
-
-	/* Read the result */
-	return dbgp_bulk_read(devnum, 0, data, size);
-}
-
-
-/* Find a PCI capability */
-static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
-{
-	u8 pos;
-	int bytes;
-
-	if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
-		PCI_STATUS_CAP_LIST))
-		return 0;
-
-	pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
-	for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
-		u8 id;
-
-		pos &= ~3;
-		id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
-		if (id == 0xff)
-			break;
-		if (id == cap)
-			return pos;
-
-		pos = read_pci_config_byte(num, slot, func,
-						 pos+PCI_CAP_LIST_NEXT);
-	}
-	return 0;
-}
-
-static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
-{
-	u32 class;
-
-	class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
-	if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
-		return 0;
-
-	return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
-}
-
-static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
-{
-	u32 bus, slot, func;
-
-	for (bus = 0; bus < 256; bus++) {
-		for (slot = 0; slot < 32; slot++) {
-			for (func = 0; func < 8; func++) {
-				unsigned cap;
-
-				cap = __find_dbgp(bus, slot, func);
-
-				if (!cap)
-					continue;
-				if (ehci_num-- != 0)
-					continue;
-				*rbus = bus;
-				*rslot = slot;
-				*rfunc = func;
-				return cap;
-			}
-		}
-	}
-	return 0;
-}
-
-static int __init ehci_reset_port(int port)
-{
-	u32 portsc;
-	u32 delay_time, delay;
-	int loop;
-
-	/* Reset the usb debug port */
-	portsc = readl(&ehci_regs->port_status[port - 1]);
-	portsc &= ~PORT_PE;
-	portsc |= PORT_RESET;
-	writel(portsc, &ehci_regs->port_status[port - 1]);
-
-	delay = HUB_ROOT_RESET_TIME;
-	for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
-	     delay_time += delay) {
-		dbgp_mdelay(delay);
-
-		portsc = readl(&ehci_regs->port_status[port - 1]);
-		if (portsc & PORT_RESET) {
-			/* force reset to complete */
-			loop = 2;
-			writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
-				&ehci_regs->port_status[port - 1]);
-			do {
-				portsc = readl(&ehci_regs->port_status[port-1]);
-			} while ((portsc & PORT_RESET) && (--loop > 0));
-		}
-
-		/* Device went away? */
-		if (!(portsc & PORT_CONNECT))
-			return -ENOTCONN;
-
-		/* bomb out completely if something weird happend */
-		if ((portsc & PORT_CSC))
-			return -EINVAL;
-
-		/* If we've finished resetting, then break out of the loop */
-		if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
-			return 0;
-	}
-	return -EBUSY;
-}
-
-static int __init ehci_wait_for_port(int port)
-{
-	u32 status;
-	int ret, reps;
-
-	for (reps = 0; reps < 3; reps++) {
-		dbgp_mdelay(100);
-		status = readl(&ehci_regs->status);
-		if (status & STS_PCD) {
-			ret = ehci_reset_port(port);
-			if (ret == 0)
-				return 0;
-		}
-	}
-	return -ENOTCONN;
-}
-
-#ifdef DBGP_DEBUG
-# define dbgp_printk early_printk
-#else
-static inline void dbgp_printk(const char *fmt, ...) { }
-#endif
-
-typedef void (*set_debug_port_t)(int port);
-
-static void __init default_set_debug_port(int port)
-{
-}
-
-static set_debug_port_t __initdata set_debug_port = default_set_debug_port;
-
-static void __init nvidia_set_debug_port(int port)
-{
-	u32 dword;
-	dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
-				 0x74);
-	dword &= ~(0x0f<<12);
-	dword |= ((port & 0x0f)<<12);
-	write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
-				 dword);
-	dbgp_printk("set debug port to %d\n", port);
-}
-
-static void __init detect_set_debug_port(void)
-{
-	u32 vendorid;
-
-	vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
-		 0x00);
-
-	if ((vendorid & 0xffff) == 0x10de) {
-		dbgp_printk("using nvidia set_debug_port\n");
-		set_debug_port = nvidia_set_debug_port;
-	}
-}
-
-static int __init ehci_setup(void)
-{
-	struct usb_debug_descriptor dbgp_desc;
-	u32 cmd, ctrl, status, portsc, hcs_params;
-	u32 debug_port, new_debug_port = 0, n_ports;
-	u32  devnum;
-	int ret, i;
-	int loop;
-	int port_map_tried;
-	int playtimes = 3;
-
-try_next_time:
-	port_map_tried = 0;
-
-try_next_port:
-
-	hcs_params = readl(&ehci_caps->hcs_params);
-	debug_port = HCS_DEBUG_PORT(hcs_params);
-	n_ports    = HCS_N_PORTS(hcs_params);
-
-	dbgp_printk("debug_port: %d\n", debug_port);
-	dbgp_printk("n_ports:    %d\n", n_ports);
-
-	for (i = 1; i <= n_ports; i++) {
-		portsc = readl(&ehci_regs->port_status[i-1]);
-		dbgp_printk("portstatus%d: %08x\n", i, portsc);
-	}
-
-	if (port_map_tried && (new_debug_port != debug_port)) {
-		if (--playtimes) {
-			set_debug_port(new_debug_port);
-			goto try_next_time;
-		}
-		return -1;
-	}
-
-	loop = 10;
-	/* Reset the EHCI controller */
-	cmd = readl(&ehci_regs->command);
-	cmd |= CMD_RESET;
-	writel(cmd, &ehci_regs->command);
-	do {
-		cmd = readl(&ehci_regs->command);
-	} while ((cmd & CMD_RESET) && (--loop > 0));
-
-	if (!loop) {
-		dbgp_printk("can not reset ehci\n");
-		return -1;
-	}
-	dbgp_printk("ehci reset done\n");
-
-	/* Claim ownership, but do not enable yet */
-	ctrl = readl(&ehci_debug->control);
-	ctrl |= DBGP_OWNER;
-	ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
-	writel(ctrl, &ehci_debug->control);
-
-	/* Start the ehci running */
-	cmd = readl(&ehci_regs->command);
-	cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
-	cmd |= CMD_RUN;
-	writel(cmd, &ehci_regs->command);
-
-	/* Ensure everything is routed to the EHCI */
-	writel(FLAG_CF, &ehci_regs->configured_flag);
-
-	/* Wait until the controller is no longer halted */
-	loop = 10;
-	do {
-		status = readl(&ehci_regs->status);
-	} while ((status & STS_HALT) && (--loop > 0));
-
-	if (!loop) {
-		dbgp_printk("ehci can be started\n");
-		return -1;
-	}
-	dbgp_printk("ehci started\n");
-
-	/* Wait for a device to show up in the debug port */
-	ret = ehci_wait_for_port(debug_port);
-	if (ret < 0) {
-		dbgp_printk("No device found in debug port\n");
-		goto next_debug_port;
-	}
-	dbgp_printk("ehci wait for port done\n");
-
-	/* Enable the debug port */
-	ctrl = readl(&ehci_debug->control);
-	ctrl |= DBGP_CLAIM;
-	writel(ctrl, &ehci_debug->control);
-	ctrl = readl(&ehci_debug->control);
-	if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
-		dbgp_printk("No device in debug port\n");
-		writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
-		goto err;
-	}
-	dbgp_printk("debug ported enabled\n");
-
-	/* Completely transfer the debug device to the debug controller */
-	portsc = readl(&ehci_regs->port_status[debug_port - 1]);
-	portsc &= ~PORT_PE;
-	writel(portsc, &ehci_regs->port_status[debug_port - 1]);
-
-	dbgp_mdelay(100);
-
-	/* Find the debug device and make it device number 127 */
-	for (devnum = 0; devnum <= 127; devnum++) {
-		ret = dbgp_control_msg(devnum,
-			USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-			USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
-			&dbgp_desc, sizeof(dbgp_desc));
-		if (ret > 0)
-			break;
-	}
-	if (devnum > 127) {
-		dbgp_printk("Could not find attached debug device\n");
-		goto err;
-	}
-	if (ret < 0) {
-		dbgp_printk("Attached device is not a debug device\n");
-		goto err;
-	}
-	dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
-
-	/* Move the device to 127 if it isn't already there */
-	if (devnum != USB_DEBUG_DEVNUM) {
-		ret = dbgp_control_msg(devnum,
-			USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-			USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
-		if (ret < 0) {
-			dbgp_printk("Could not move attached device to %d\n",
-				USB_DEBUG_DEVNUM);
-			goto err;
-		}
-		devnum = USB_DEBUG_DEVNUM;
-		dbgp_printk("debug device renamed to 127\n");
-	}
-
-	/* Enable the debug interface */
-	ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
-		USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
-		USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
-	if (ret < 0) {
-		dbgp_printk(" Could not enable the debug device\n");
-		goto err;
-	}
-	dbgp_printk("debug interface enabled\n");
-
-	/* Perform a small write to get the even/odd data state in sync
-	 */
-	ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
-	if (ret < 0) {
-		dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
-		goto err;
-	}
-	dbgp_printk("small write doned\n");
-
-	return 0;
-err:
-	/* Things didn't work so remove my claim */
-	ctrl = readl(&ehci_debug->control);
-	ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
-	writel(ctrl, &ehci_debug->control);
-	return -1;
-
-next_debug_port:
-	port_map_tried |= (1<<(debug_port - 1));
-	new_debug_port = ((debug_port-1+1)%n_ports) + 1;
-	if (port_map_tried != ((1<<n_ports) - 1)) {
-		set_debug_port(new_debug_port);
-		goto try_next_port;
-	}
-	if (--playtimes) {
-		set_debug_port(new_debug_port);
-		goto try_next_time;
-	}
-
-	return -1;
-}
-
-static int __init early_dbgp_init(char *s)
-{
-	u32 debug_port, bar, offset;
-	u32 bus, slot, func, cap;
-	void __iomem *ehci_bar;
-	u32 dbgp_num;
-	u32 bar_val;
-	char *e;
-	int ret;
-	u8 byte;
-
-	if (!early_pci_allowed())
-		return -1;
-
-	dbgp_num = 0;
-	if (*s)
-		dbgp_num = simple_strtoul(s, &e, 10);
-	dbgp_printk("dbgp_num: %d\n", dbgp_num);
-
-	cap = find_dbgp(dbgp_num, &bus, &slot, &func);
-	if (!cap)
-		return -1;
-
-	dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
-			 func);
-
-	debug_port = read_pci_config(bus, slot, func, cap);
-	bar = (debug_port >> 29) & 0x7;
-	bar = (bar * 4) + 0xc;
-	offset = (debug_port >> 16) & 0xfff;
-	dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
-	if (bar != PCI_BASE_ADDRESS_0) {
-		dbgp_printk("only debug ports on bar 1 handled.\n");
-
-		return -1;
-	}
-
-	bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
-	dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
-	if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
-		dbgp_printk("only simple 32bit mmio bars supported\n");
-
-		return -1;
-	}
-
-	/* double check if the mem space is enabled */
-	byte = read_pci_config_byte(bus, slot, func, 0x04);
-	if (!(byte & 0x2)) {
-		byte  |= 0x02;
-		write_pci_config_byte(bus, slot, func, 0x04, byte);
-		dbgp_printk("mmio for ehci enabled\n");
-	}
-
-	/*
-	 * FIXME I don't have the bar size so just guess PAGE_SIZE is more
-	 * than enough.  1K is the biggest I have seen.
-	 */
-	set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
-	ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
-	ehci_bar += bar_val & ~PAGE_MASK;
-	dbgp_printk("ehci_bar: %p\n", ehci_bar);
-
-	ehci_caps  = ehci_bar;
-	ehci_regs  = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
-	ehci_debug = ehci_bar + offset;
-	ehci_dev.bus = bus;
-	ehci_dev.slot = slot;
-	ehci_dev.func = func;
-
-	detect_set_debug_port();
-
-	ret = ehci_setup();
-	if (ret < 0) {
-		dbgp_printk("ehci_setup failed\n");
-		ehci_debug = NULL;
-
-		return -1;
-	}
-
-	return 0;
-}
-
-static void early_dbgp_write(struct console *con, const char *str, u32 n)
-{
-	int chunk, ret;
-
-	if (!ehci_debug)
-		return;
-	while (n > 0) {
-		chunk = n;
-		if (chunk > DBGP_MAX_PACKET)
-			chunk = DBGP_MAX_PACKET;
-		ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
-			dbgp_endpoint_out, str, chunk);
-		str += chunk;
-		n -= chunk;
-	}
-}
-
-static struct console early_dbgp_console = {
-	.name =		"earlydbg",
-	.write =	early_dbgp_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-#endif
-
 /* Direct interface for emergencies */
 static struct console *early_console = &early_vga_console;
 static int __initdata early_console_initialized;
@@ -891,10 +176,24 @@ asmlinkage void early_printk(const char *fmt, ...)
 	va_end(ap);
 }
 
+static inline void early_console_register(struct console *con, int keep_early)
+{
+	if (early_console->index != -1) {
+		printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+		       con->name);
+		return;
+	}
+	early_console = con;
+	if (keep_early)
+		early_console->flags &= ~CON_BOOT;
+	else
+		early_console->flags |= CON_BOOT;
+	register_console(early_console);
+}
 
 static int __init setup_early_printk(char *buf)
 {
-	int keep_early;
+	int keep;
 
 	if (!buf)
 		return 0;
@@ -903,42 +202,34 @@ static int __init setup_early_printk(char *buf)
 		return 0;
 	early_console_initialized = 1;
 
-	keep_early = (strstr(buf, "keep") != NULL);
-
-	if (!strncmp(buf, "serial", 6)) {
-		early_serial_init(buf + 6);
-		early_console = &early_serial_console;
-	} else if (!strncmp(buf, "ttyS", 4)) {
-		early_serial_init(buf);
-		early_console = &early_serial_console;
-	} else if (!strncmp(buf, "vga", 3)
-		&& boot_params.screen_info.orig_video_isVGA == 1) {
-		max_xpos = boot_params.screen_info.orig_video_cols;
-		max_ypos = boot_params.screen_info.orig_video_lines;
-		current_ypos = boot_params.screen_info.orig_y;
-		early_console = &early_vga_console;
+	keep = (strstr(buf, "keep") != NULL);
+
+	while (*buf != '\0') {
+		if (!strncmp(buf, "serial", 6)) {
+			early_serial_init(buf + 6);
+			early_console_register(&early_serial_console, keep);
+		}
+		if (!strncmp(buf, "ttyS", 4)) {
+			early_serial_init(buf + 4);
+			early_console_register(&early_serial_console, keep);
+		}
+		if (!strncmp(buf, "vga", 3) &&
+		    boot_params.screen_info.orig_video_isVGA == 1) {
+			max_xpos = boot_params.screen_info.orig_video_cols;
+			max_ypos = boot_params.screen_info.orig_video_lines;
+			current_ypos = boot_params.screen_info.orig_y;
+			early_console_register(&early_vga_console, keep);
+		}
 #ifdef CONFIG_EARLY_PRINTK_DBGP
-	} else if (!strncmp(buf, "dbgp", 4)) {
-		if (early_dbgp_init(buf+4) < 0)
-			return 0;
-		early_console = &early_dbgp_console;
-		/*
-		 * usb subsys will reset ehci controller, so don't keep
-		 * that early console
-		 */
-		keep_early = 0;
+		if (!strncmp(buf, "dbgp", 4) && !early_dbgp_init(buf + 4))
+			early_console_register(&early_dbgp_console, keep);
 #endif
 #ifdef CONFIG_HVC_XEN
-	} else if (!strncmp(buf, "xen", 3)) {
-		early_console = &xenboot_console;
+		if (!strncmp(buf, "xen", 3))
+			early_console_register(&xenboot_console, keep);
 #endif
+		buf++;
 	}
-
-	if (keep_early)
-		early_console->flags &= ~CON_BOOT;
-	else
-		early_console->flags |= CON_BOOT;
-	register_console(early_console);
 	return 0;
 }