diff options
Diffstat (limited to 'arch/x86/kernel/ds_selftest.c')
-rw-r--r-- | arch/x86/kernel/ds_selftest.c | 408 |
1 files changed, 0 insertions, 408 deletions
diff --git a/arch/x86/kernel/ds_selftest.c b/arch/x86/kernel/ds_selftest.c deleted file mode 100644 index 6bc7c19..0000000 --- a/arch/x86/kernel/ds_selftest.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Debug Store support - selftest - * - * - * Copyright (C) 2009 Intel Corporation. - * Markus Metzger <markus.t.metzger@intel.com>, 2009 - */ - -#include "ds_selftest.h" - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/smp.h> -#include <linux/cpu.h> - -#include <asm/ds.h> - - -#define BUFFER_SIZE 521 /* Intentionally chose an odd size. */ -#define SMALL_BUFFER_SIZE 24 /* A single bts entry. */ - -struct ds_selftest_bts_conf { - struct bts_tracer *tracer; - int error; - int (*suspend)(struct bts_tracer *); - int (*resume)(struct bts_tracer *); -}; - -static int ds_selftest_bts_consistency(const struct bts_trace *trace) -{ - int error = 0; - - if (!trace) { - printk(KERN_CONT "failed to access trace..."); - /* Bail out. Other tests are pointless. */ - return -1; - } - - if (!trace->read) { - printk(KERN_CONT "bts read not available..."); - error = -1; - } - - /* Do some sanity checks on the trace configuration. */ - if (!trace->ds.n) { - printk(KERN_CONT "empty bts buffer..."); - error = -1; - } - if (!trace->ds.size) { - printk(KERN_CONT "bad bts trace setup..."); - error = -1; - } - if (trace->ds.end != - (char *)trace->ds.begin + (trace->ds.n * trace->ds.size)) { - printk(KERN_CONT "bad bts buffer setup..."); - error = -1; - } - /* - * We allow top in [begin; end], since its not clear when the - * overflow adjustment happens: after the increment or before the - * write. - */ - if ((trace->ds.top < trace->ds.begin) || - (trace->ds.end < trace->ds.top)) { - printk(KERN_CONT "bts top out of bounds..."); - error = -1; - } - - return error; -} - -static int ds_selftest_bts_read(struct bts_tracer *tracer, - const struct bts_trace *trace, - const void *from, const void *to) -{ - const unsigned char *at; - - /* - * Check a few things which do not belong to this test. - * They should be covered by other tests. - */ - if (!trace) - return -1; - - if (!trace->read) - return -1; - - if (to < from) - return -1; - - if (from < trace->ds.begin) - return -1; - - if (trace->ds.end < to) - return -1; - - if (!trace->ds.size) - return -1; - - /* Now to the test itself. */ - for (at = from; (void *)at < to; at += trace->ds.size) { - struct bts_struct bts; - unsigned long index; - int error; - - if (((void *)at - trace->ds.begin) % trace->ds.size) { - printk(KERN_CONT - "read from non-integer index..."); - return -1; - } - index = ((void *)at - trace->ds.begin) / trace->ds.size; - - memset(&bts, 0, sizeof(bts)); - error = trace->read(tracer, at, &bts); - if (error < 0) { - printk(KERN_CONT - "error reading bts trace at [%lu] (0x%p)...", - index, at); - return error; - } - - switch (bts.qualifier) { - case BTS_BRANCH: - break; - default: - printk(KERN_CONT - "unexpected bts entry %llu at [%lu] (0x%p)...", - bts.qualifier, index, at); - return -1; - } - } - - return 0; -} - -static void ds_selftest_bts_cpu(void *arg) -{ - struct ds_selftest_bts_conf *conf = arg; - const struct bts_trace *trace; - void *top; - - if (IS_ERR(conf->tracer)) { - conf->error = PTR_ERR(conf->tracer); - conf->tracer = NULL; - - printk(KERN_CONT - "initialization failed (err: %d)...", conf->error); - return; - } - - /* We should meanwhile have enough trace. */ - conf->error = conf->suspend(conf->tracer); - if (conf->error < 0) - return; - - /* Let's see if we can access the trace. */ - trace = ds_read_bts(conf->tracer); - - conf->error = ds_selftest_bts_consistency(trace); - if (conf->error < 0) - return; - - /* If everything went well, we should have a few trace entries. */ - if (trace->ds.top == trace->ds.begin) { - /* - * It is possible but highly unlikely that we got a - * buffer overflow and end up at exactly the same - * position we started from. - * Let's issue a warning, but continue. - */ - printk(KERN_CONT "no trace/overflow..."); - } - - /* Let's try to read the trace we collected. */ - conf->error = - ds_selftest_bts_read(conf->tracer, trace, - trace->ds.begin, trace->ds.top); - if (conf->error < 0) - return; - - /* - * Let's read the trace again. - * Since we suspended tracing, we should get the same result. - */ - top = trace->ds.top; - - trace = ds_read_bts(conf->tracer); - conf->error = ds_selftest_bts_consistency(trace); - if (conf->error < 0) - return; - - if (top != trace->ds.top) { - printk(KERN_CONT "suspend not working..."); - conf->error = -1; - return; - } - - /* Let's collect some more trace - see if resume is working. */ - conf->error = conf->resume(conf->tracer); - if (conf->error < 0) - return; - - conf->error = conf->suspend(conf->tracer); - if (conf->error < 0) - return; - - trace = ds_read_bts(conf->tracer); - - conf->error = ds_selftest_bts_consistency(trace); - if (conf->error < 0) - return; - - if (trace->ds.top == top) { - /* - * It is possible but highly unlikely that we got a - * buffer overflow and end up at exactly the same - * position we started from. - * Let's issue a warning and check the full trace. - */ - printk(KERN_CONT - "no resume progress/overflow..."); - - conf->error = - ds_selftest_bts_read(conf->tracer, trace, - trace->ds.begin, trace->ds.end); - } else if (trace->ds.top < top) { - /* - * We had a buffer overflow - the entire buffer should - * contain trace records. - */ - conf->error = - ds_selftest_bts_read(conf->tracer, trace, - trace->ds.begin, trace->ds.end); - } else { - /* - * It is quite likely that the buffer did not overflow. - * Let's just check the delta trace. - */ - conf->error = - ds_selftest_bts_read(conf->tracer, trace, top, - trace->ds.top); - } - if (conf->error < 0) - return; - - conf->error = 0; -} - -static int ds_suspend_bts_wrap(struct bts_tracer *tracer) -{ - ds_suspend_bts(tracer); - return 0; -} - -static int ds_resume_bts_wrap(struct bts_tracer *tracer) -{ - ds_resume_bts(tracer); - return 0; -} - -static void ds_release_bts_noirq_wrap(void *tracer) -{ - (void)ds_release_bts_noirq(tracer); -} - -static int ds_selftest_bts_bad_release_noirq(int cpu, - struct bts_tracer *tracer) -{ - int error = -EPERM; - - /* Try to release the tracer on the wrong cpu. */ - get_cpu(); - if (cpu != smp_processor_id()) { - error = ds_release_bts_noirq(tracer); - if (error != -EPERM) - printk(KERN_CONT "release on wrong cpu..."); - } - put_cpu(); - - return error ? 0 : -1; -} - -static int ds_selftest_bts_bad_request_cpu(int cpu, void *buffer) -{ - struct bts_tracer *tracer; - int error; - - /* Try to request cpu tracing while task tracing is active. */ - tracer = ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE, NULL, - (size_t)-1, BTS_KERNEL); - error = PTR_ERR(tracer); - if (!IS_ERR(tracer)) { - ds_release_bts(tracer); - error = 0; - } - - if (error != -EPERM) - printk(KERN_CONT "cpu/task tracing overlap..."); - - return error ? 0 : -1; -} - -static int ds_selftest_bts_bad_request_task(void *buffer) -{ - struct bts_tracer *tracer; - int error; - - /* Try to request cpu tracing while task tracing is active. */ - tracer = ds_request_bts_task(current, buffer, BUFFER_SIZE, NULL, - (size_t)-1, BTS_KERNEL); - error = PTR_ERR(tracer); - if (!IS_ERR(tracer)) { - error = 0; - ds_release_bts(tracer); - } - - if (error != -EPERM) - printk(KERN_CONT "task/cpu tracing overlap..."); - - return error ? 0 : -1; -} - -int ds_selftest_bts(void) -{ - struct ds_selftest_bts_conf conf; - unsigned char buffer[BUFFER_SIZE], *small_buffer; - unsigned long irq; - int cpu; - - printk(KERN_INFO "[ds] bts selftest..."); - conf.error = 0; - - small_buffer = (unsigned char *)ALIGN((unsigned long)buffer, 8) + 8; - - get_online_cpus(); - for_each_online_cpu(cpu) { - conf.suspend = ds_suspend_bts_wrap; - conf.resume = ds_resume_bts_wrap; - conf.tracer = - ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE, - NULL, (size_t)-1, BTS_KERNEL); - ds_selftest_bts_cpu(&conf); - if (conf.error >= 0) - conf.error = ds_selftest_bts_bad_request_task(buffer); - ds_release_bts(conf.tracer); - if (conf.error < 0) - goto out; - - conf.suspend = ds_suspend_bts_noirq; - conf.resume = ds_resume_bts_noirq; - conf.tracer = - ds_request_bts_cpu(cpu, buffer, BUFFER_SIZE, - NULL, (size_t)-1, BTS_KERNEL); - smp_call_function_single(cpu, ds_selftest_bts_cpu, &conf, 1); - if (conf.error >= 0) { - conf.error = - ds_selftest_bts_bad_release_noirq(cpu, - conf.tracer); - /* We must not release the tracer twice. */ - if (conf.error < 0) - conf.tracer = NULL; - } - if (conf.error >= 0) - conf.error = ds_selftest_bts_bad_request_task(buffer); - smp_call_function_single(cpu, ds_release_bts_noirq_wrap, - conf.tracer, 1); - if (conf.error < 0) - goto out; - } - - conf.suspend = ds_suspend_bts_wrap; - conf.resume = ds_resume_bts_wrap; - conf.tracer = - ds_request_bts_task(current, buffer, BUFFER_SIZE, - NULL, (size_t)-1, BTS_KERNEL); - ds_selftest_bts_cpu(&conf); - if (conf.error >= 0) - conf.error = ds_selftest_bts_bad_request_cpu(0, buffer); - ds_release_bts(conf.tracer); - if (conf.error < 0) - goto out; - - conf.suspend = ds_suspend_bts_noirq; - conf.resume = ds_resume_bts_noirq; - conf.tracer = - ds_request_bts_task(current, small_buffer, SMALL_BUFFER_SIZE, - NULL, (size_t)-1, BTS_KERNEL); - local_irq_save(irq); - ds_selftest_bts_cpu(&conf); - if (conf.error >= 0) - conf.error = ds_selftest_bts_bad_request_cpu(0, buffer); - ds_release_bts_noirq(conf.tracer); - local_irq_restore(irq); - if (conf.error < 0) - goto out; - - conf.error = 0; - out: - put_online_cpus(); - printk(KERN_CONT "%s.\n", (conf.error ? "failed" : "passed")); - - return conf.error; -} - -int ds_selftest_pebs(void) -{ - return 0; -} |