1 files changed, 239 insertions, 217 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 29b5b18..b665d24 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -134,9 +134,6 @@ static inline void imcr_apic_to_pic(void)
  */
 static int force_enable_local_apic __initdata;
 
-/* Control whether x2APIC mode is enabled or not */
-static bool nox2apic __initdata;
-
 /*
  * APIC command line parameters
  */
@@ -161,33 +158,6 @@ static __init int setup_apicpmtimer(char *s)
 __setup("apicpmtimer", setup_apicpmtimer);
 #endif
 
-int x2apic_mode;
-#ifdef CONFIG_X86_X2APIC
-/* x2apic enabled before OS handover */
-int x2apic_preenabled;
-static int x2apic_disabled;
-static int __init setup_nox2apic(char *str)
-{
-	if (x2apic_enabled()) {
-		int apicid = native_apic_msr_read(APIC_ID);
-
-		if (apicid >= 255) {
-			pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
-				   apicid);
-			return 0;
-		}
-
-		pr_warning("x2apic already enabled. will disable it\n");
-	} else
-		setup_clear_cpu_cap(X86_FEATURE_X2APIC);
-
-	nox2apic = true;
-
-	return 0;
-}
-early_param("nox2apic", setup_nox2apic);
-#endif
-
 unsigned long mp_lapic_addr;
 int disable_apic;
 /* Disable local APIC timer from the kernel commandline or via dmi quirk */
@@ -1475,7 +1445,7 @@ void setup_local_APIC(void)
 #endif
 }
 
-void end_local_APIC_setup(void)
+static void end_local_APIC_setup(void)
 {
 	lapic_setup_esr();
 
@@ -1492,116 +1462,184 @@ void end_local_APIC_setup(void)
 	apic_pm_activate();
 }
 
-void __init bsp_end_local_APIC_setup(void)
+/*
+ * APIC setup function for application processors. Called from smpboot.c
+ */
+void apic_ap_setup(void)
 {
+	setup_local_APIC();
 	end_local_APIC_setup();
-
-	/*
-	 * Now that local APIC setup is completed for BP, configure the fault
-	 * handling for interrupt remapping.
-	 */
-	irq_remap_enable_fault_handling();
-
 }
 
 #ifdef CONFIG_X86_X2APIC
-/*
- * Need to disable xapic and x2apic at the same time and then enable xapic mode
- */
-static inline void __disable_x2apic(u64 msr)
-{
-	wrmsrl(MSR_IA32_APICBASE,
-	       msr & ~(X2APIC_ENABLE | XAPIC_ENABLE));
-	wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
-}
+int x2apic_mode;
 
-static __init void disable_x2apic(void)
+enum {
+	X2APIC_OFF,
+	X2APIC_ON,
+	X2APIC_DISABLED,
+};
+static int x2apic_state;
+
+static inline void __x2apic_disable(void)
 {
 	u64 msr;
 
-	if (!cpu_has_x2apic)
+	if (cpu_has_apic)
 		return;
 
 	rdmsrl(MSR_IA32_APICBASE, msr);
-	if (msr & X2APIC_ENABLE) {
-		u32 x2apic_id = read_apic_id();
-
-		if (x2apic_id >= 255)
-			panic("Cannot disable x2apic, id: %08x\n", x2apic_id);
+	if (!(msr & X2APIC_ENABLE))
+		return;
+	/* Disable xapic and x2apic first and then reenable xapic mode */
+	wrmsrl(MSR_IA32_APICBASE, msr & ~(X2APIC_ENABLE | XAPIC_ENABLE));
+	wrmsrl(MSR_IA32_APICBASE, msr & ~X2APIC_ENABLE);
+	printk_once(KERN_INFO "x2apic disabled\n");
+}
 
-		pr_info("Disabling x2apic\n");
-		__disable_x2apic(msr);
+static inline void __x2apic_enable(void)
+{
+	u64 msr;
 
-		if (nox2apic) {
-			clear_cpu_cap(&cpu_data(0), X86_FEATURE_X2APIC);
-			setup_clear_cpu_cap(X86_FEATURE_X2APIC);
-		}
+	rdmsrl(MSR_IA32_APICBASE, msr);
+	if (msr & X2APIC_ENABLE)
+		return;
+	wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE);
+	printk_once(KERN_INFO "x2apic enabled\n");
+}
 
-		x2apic_disabled = 1;
-		x2apic_mode = 0;
+static int __init setup_nox2apic(char *str)
+{
+	if (x2apic_enabled()) {
+		int apicid = native_apic_msr_read(APIC_ID);
 
-		register_lapic_address(mp_lapic_addr);
+		if (apicid >= 255) {
+			pr_warning("Apicid: %08x, cannot enforce nox2apic\n",
+				   apicid);
+			return 0;
+		}
+		pr_warning("x2apic already enabled.\n");
+		__x2apic_disable();
 	}
+	setup_clear_cpu_cap(X86_FEATURE_X2APIC);
+	x2apic_state = X2APIC_DISABLED;
+	x2apic_mode = 0;
+	return 0;
 }
+early_param("nox2apic", setup_nox2apic);
 
-void check_x2apic(void)
+/* Called from cpu_init() to enable x2apic on (secondary) cpus */
+void x2apic_setup(void)
 {
-	if (x2apic_enabled()) {
-		pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
-		x2apic_preenabled = x2apic_mode = 1;
+	/*
+	 * If x2apic is not in ON state, disable it if already enabled
+	 * from BIOS.
+	 */
+	if (x2apic_state != X2APIC_ON) {
+		__x2apic_disable();
+		return;
 	}
+	__x2apic_enable();
 }
 
-void enable_x2apic(void)
+static __init void x2apic_disable(void)
 {
-	u64 msr;
+	u32 x2apic_id;
 
-	rdmsrl(MSR_IA32_APICBASE, msr);
-	if (x2apic_disabled) {
-		__disable_x2apic(msr);
+	if (x2apic_state != X2APIC_ON)
+		goto out;
+
+	x2apic_id = read_apic_id();
+	if (x2apic_id >= 255)
+		panic("Cannot disable x2apic, id: %08x\n", x2apic_id);
+
+	__x2apic_disable();
+	register_lapic_address(mp_lapic_addr);
+out:
+	x2apic_state = X2APIC_DISABLED;
+	x2apic_mode = 0;
+}
+
+static __init void x2apic_enable(void)
+{
+	if (x2apic_state != X2APIC_OFF)
 		return;
-	}
 
-	if (!x2apic_mode)
+	x2apic_mode = 1;
+	x2apic_state = X2APIC_ON;
+	__x2apic_enable();
+}
+
+static __init void try_to_enable_x2apic(int remap_mode)
+{
+	if (x2apic_state == X2APIC_DISABLED)
 		return;
 
-	if (!(msr & X2APIC_ENABLE)) {
-		printk_once(KERN_INFO "Enabling x2apic\n");
-		wrmsrl(MSR_IA32_APICBASE, msr | X2APIC_ENABLE);
+	if (remap_mode != IRQ_REMAP_X2APIC_MODE) {
+		/* IR is required if there is APIC ID > 255 even when running
+		 * under KVM
+		 */
+		if (max_physical_apicid > 255 ||
+		    (IS_ENABLED(CONFIG_HYPERVISOR_GUEST) &&
+		     !hypervisor_x2apic_available())) {
+			pr_info("x2apic: IRQ remapping doesn't support X2APIC mode\n");
+			x2apic_disable();
+			return;
+		}
+
+		/*
+		 * without IR all CPUs can be addressed by IOAPIC/MSI
+		 * only in physical mode
+		 */
+		x2apic_phys = 1;
 	}
+	x2apic_enable();
 }
-#endif /* CONFIG_X86_X2APIC */
 
-int __init enable_IR(void)
+void __init check_x2apic(void)
 {
-#ifdef CONFIG_IRQ_REMAP
-	if (!irq_remapping_supported()) {
-		pr_debug("intr-remapping not supported\n");
-		return -1;
+	if (x2apic_enabled()) {
+		pr_info("x2apic: enabled by BIOS, switching to x2apic ops\n");
+		x2apic_mode = 1;
+		x2apic_state = X2APIC_ON;
+	} else if (!cpu_has_x2apic) {
+		x2apic_state = X2APIC_DISABLED;
 	}
+}
+#else /* CONFIG_X86_X2APIC */
+static int __init validate_x2apic(void)
+{
+	if (!apic_is_x2apic_enabled())
+		return 0;
+	/*
+	 * Checkme: Can we simply turn off x2apic here instead of panic?
+	 */
+	panic("BIOS has enabled x2apic but kernel doesn't support x2apic, please disable x2apic in BIOS.\n");
+}
+early_initcall(validate_x2apic);
 
-	if (!x2apic_preenabled && skip_ioapic_setup) {
-		pr_info("Skipped enabling intr-remap because of skipping "
-			"io-apic setup\n");
+static inline void try_to_enable_x2apic(int remap_mode) { }
+static inline void __x2apic_enable(void) { }
+#endif /* !CONFIG_X86_X2APIC */
+
+static int __init try_to_enable_IR(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (!x2apic_enabled() && skip_ioapic_setup) {
+		pr_info("Not enabling interrupt remapping due to skipped IO-APIC setup\n");
 		return -1;
 	}
-
-	return irq_remapping_enable();
 #endif
-	return -1;
+	return irq_remapping_enable();
 }
 
 void __init enable_IR_x2apic(void)
 {
 	unsigned long flags;
-	int ret, x2apic_enabled = 0;
-	int hardware_init_ret;
-
-	/* Make sure irq_remap_ops are initialized */
-	setup_irq_remapping_ops();
+	int ret, ir_stat;
 
-	hardware_init_ret = irq_remapping_prepare();
-	if (hardware_init_ret && !x2apic_supported())
+	ir_stat = irq_remapping_prepare();
+	if (ir_stat < 0 && !x2apic_supported())
 		return;
 
 	ret = save_ioapic_entries();
@@ -1614,49 +1652,13 @@ void __init enable_IR_x2apic(void)
 	legacy_pic->mask_all();
 	mask_ioapic_entries();
 
-	if (x2apic_preenabled && nox2apic)
-		disable_x2apic();
-
-	if (hardware_init_ret)
-		ret = -1;
-	else
-		ret = enable_IR();
-
-	if (!x2apic_supported())
-		goto skip_x2apic;
+	/* If irq_remapping_prepare() succeded, try to enable it */
+	if (ir_stat >= 0)
+		ir_stat = try_to_enable_IR();
+	/* ir_stat contains the remap mode or an error code */
+	try_to_enable_x2apic(ir_stat);
 
-	if (ret < 0) {
-		/* IR is required if there is APIC ID > 255 even when running
-		 * under KVM
-		 */
-		if (max_physical_apicid > 255 ||
-		    !hypervisor_x2apic_available()) {
-			if (x2apic_preenabled)
-				disable_x2apic();
-			goto skip_x2apic;
-		}
-		/*
-		 * without IR all CPUs can be addressed by IOAPIC/MSI
-		 * only in physical mode
-		 */
-		x2apic_force_phys();
-	}
-
-	if (ret == IRQ_REMAP_XAPIC_MODE) {
-		pr_info("x2apic not enabled, IRQ remapping is in xapic mode\n");
-		goto skip_x2apic;
-	}
-
-	x2apic_enabled = 1;
-
-	if (x2apic_supported() && !x2apic_mode) {
-		x2apic_mode = 1;
-		enable_x2apic();
-		pr_info("Enabled x2apic\n");
-	}
-
-skip_x2apic:
-	if (ret < 0) /* IR enabling failed */
+	if (ir_stat < 0)
 		restore_ioapic_entries();
 	legacy_pic->restore_mask();
 	local_irq_restore(flags);
@@ -1847,82 +1849,8 @@ void __init register_lapic_address(unsigned long address)
 	}
 }
 
-/*
- * This initializes the IO-APIC and APIC hardware if this is
- * a UP kernel.
- */
 int apic_version[MAX_LOCAL_APIC];
 
-int __init APIC_init_uniprocessor(void)
-{
-	if (disable_apic) {
-		pr_info("Apic disabled\n");
-		return -1;
-	}
-#ifdef CONFIG_X86_64
-	if (!cpu_has_apic) {
-		disable_apic = 1;
-		pr_info("Apic disabled by BIOS\n");
-		return -1;
-	}
-#else
-	if (!smp_found_config && !cpu_has_apic)
-		return -1;
-
-	/*
-	 * Complain if the BIOS pretends there is one.
-	 */
-	if (!cpu_has_apic &&
-	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
-		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
-			boot_cpu_physical_apicid);
-		return -1;
-	}
-#endif
-
-	default_setup_apic_routing();
-
-	verify_local_APIC();
-	connect_bsp_APIC();
-
-#ifdef CONFIG_X86_64
-	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
-#else
-	/*
-	 * Hack: In case of kdump, after a crash, kernel might be booting
-	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
-	 * might be zero if read from MP tables. Get it from LAPIC.
-	 */
-# ifdef CONFIG_CRASH_DUMP
-	boot_cpu_physical_apicid = read_apic_id();
-# endif
-#endif
-	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
-	setup_local_APIC();
-
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Now enable IO-APICs, actually call clear_IO_APIC
-	 * We need clear_IO_APIC before enabling error vector
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		enable_IO_APIC();
-#endif
-
-	bsp_end_local_APIC_setup();
-
-#ifdef CONFIG_X86_IO_APIC
-	if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else {
-		nr_ioapics = 0;
-	}
-#endif
-
-	x86_init.timers.setup_percpu_clockev();
-	return 0;
-}
-
 /*
  * Local APIC interrupts
  */
@@ -2027,7 +1955,7 @@ __visible void smp_trace_error_interrupt(struct pt_regs *regs)
 /**
  * connect_bsp_APIC - attach the APIC to the interrupt system
  */
-void __init connect_bsp_APIC(void)
+static void __init connect_bsp_APIC(void)
 {
 #ifdef CONFIG_X86_32
 	if (pic_mode) {
@@ -2274,6 +2202,100 @@ void __init apic_set_eoi_write(void (*eoi_write)(u32 reg, u32 v))
 	}
 }
 
+static void __init apic_bsp_up_setup(void)
+{
+#ifdef CONFIG_X86_64
+	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
+#else
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+# ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = read_apic_id();
+# endif
+#endif
+	physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
+}
+
+/**
+ * apic_bsp_setup - Setup function for local apic and io-apic
+ * @upmode:		Force UP mode (for APIC_init_uniprocessor)
+ *
+ * Returns:
+ * apic_id of BSP APIC
+ */
+int __init apic_bsp_setup(bool upmode)
+{
+	int id;
+
+	connect_bsp_APIC();
+	if (upmode)
+		apic_bsp_up_setup();
+	setup_local_APIC();
+
+	if (x2apic_mode)
+		id = apic_read(APIC_LDR);
+	else
+		id = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
+
+	enable_IO_APIC();
+	end_local_APIC_setup();
+	irq_remap_enable_fault_handling();
+	setup_IO_APIC();
+	/* Setup local timer */
+	x86_init.timers.setup_percpu_clockev();
+	return id;
+}
+
+/*
+ * This initializes the IO-APIC and APIC hardware if this is
+ * a UP kernel.
+ */
+int __init APIC_init_uniprocessor(void)
+{
+	if (disable_apic) {
+		pr_info("Apic disabled\n");
+		return -1;
+	}
+#ifdef CONFIG_X86_64
+	if (!cpu_has_apic) {
+		disable_apic = 1;
+		pr_info("Apic disabled by BIOS\n");
+		return -1;
+	}
+#else
+	if (!smp_found_config && !cpu_has_apic)
+		return -1;
+
+	/*
+	 * Complain if the BIOS pretends there is one.
+	 */
+	if (!cpu_has_apic &&
+	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
+			boot_cpu_physical_apicid);
+		return -1;
+	}
+#endif
+
+	if (!smp_found_config)
+		disable_ioapic_support();
+
+	default_setup_apic_routing();
+	verify_local_APIC();
+	apic_bsp_setup(true);
+	return 0;
+}
+
+#ifdef CONFIG_UP_LATE_INIT
+void __init up_late_init(void)
+{
+	APIC_init_uniprocessor();
+}
+#endif
+
 /*
  * Power management
  */
@@ -2359,9 +2381,9 @@ static void lapic_resume(void)
 	mask_ioapic_entries();
 	legacy_pic->mask_all();
 
-	if (x2apic_mode)
-		enable_x2apic();
-	else {
+	if (x2apic_mode) {
+		__x2apic_enable();
+	} else {
 		/*
 		 * Make sure the APICBASE points to the right address
 		 *