diff options
Diffstat (limited to 'arch/x86/kernel/amd_iommu_init.c')
| -rw-r--r-- | arch/x86/kernel/amd_iommu_init.c | 361 |
1 files changed, 273 insertions, 88 deletions
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 2a13e43..d9a9da5 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -25,20 +25,13 @@ #include <asm/pci-direct.h> #include <asm/amd_iommu_types.h> #include <asm/amd_iommu.h> -#include <asm/gart.h> +#include <asm/iommu.h> /* * definitions for the ACPI scanning code */ -#define UPDATE_LAST_BDF(x) do {\ - if ((x) > amd_iommu_last_bdf) \ - amd_iommu_last_bdf = (x); \ - } while (0); - -#define DEVID(bus, devfn) (((bus) << 8) | (devfn)) #define PCI_BUS(x) (((x) >> 8) & 0xff) #define IVRS_HEADER_LENGTH 48 -#define TBL_SIZE(x) (1 << (PAGE_SHIFT + get_order(amd_iommu_last_bdf * (x)))) #define ACPI_IVHD_TYPE 0x10 #define ACPI_IVMD_TYPE_ALL 0x20 @@ -71,6 +64,17 @@ #define ACPI_DEVFLAG_LINT1 0x80 #define ACPI_DEVFLAG_ATSDIS 0x10000000 +/* + * ACPI table definitions + * + * These data structures are laid over the table to parse the important values + * out of it. + */ + +/* + * structure describing one IOMMU in the ACPI table. Typically followed by one + * or more ivhd_entrys. + */ struct ivhd_header { u8 type; u8 flags; @@ -83,6 +87,10 @@ struct ivhd_header { u32 reserved; } __attribute__((packed)); +/* + * A device entry describing which devices a specific IOMMU translates and + * which requestor ids they use. + */ struct ivhd_entry { u8 type; u16 devid; @@ -90,6 +98,10 @@ struct ivhd_entry { u32 ext; } __attribute__((packed)); +/* + * An AMD IOMMU memory definition structure. It defines things like exclusion + * ranges for devices and regions that should be unity mapped. + */ struct ivmd_header { u8 type; u8 flags; @@ -103,22 +115,80 @@ struct ivmd_header { static int __initdata amd_iommu_detected; -u16 amd_iommu_last_bdf; -struct list_head amd_iommu_unity_map; -unsigned amd_iommu_aperture_order = 26; -int amd_iommu_isolate; +u16 amd_iommu_last_bdf; /* largest PCI device id we have + to handle */ +LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings + we find in ACPI */ +unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */ +int amd_iommu_isolate; /* if 1, device isolation is enabled */ + +LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the + system */ -struct list_head amd_iommu_list; +/* + * Pointer to the device table which is shared by all AMD IOMMUs + * it is indexed by the PCI device id or the HT unit id and contains + * information about the domain the device belongs to as well as the + * page table root pointer. + */ struct dev_table_entry *amd_iommu_dev_table; + +/* + * The alias table is a driver specific data structure which contains the + * mappings of the PCI device ids to the actual requestor ids on the IOMMU. + * More than one device can share the same requestor id. + */ u16 *amd_iommu_alias_table; + +/* + * The rlookup table is used to find the IOMMU which is responsible + * for a specific device. It is also indexed by the PCI device id. + */ struct amd_iommu **amd_iommu_rlookup_table; + +/* + * The pd table (protection domain table) is used to find the protection domain + * data structure a device belongs to. Indexed with the PCI device id too. + */ struct protection_domain **amd_iommu_pd_table; + +/* + * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap + * to know which ones are already in use. + */ unsigned long *amd_iommu_pd_alloc_bitmap; -static u32 dev_table_size; -static u32 alias_table_size; -static u32 rlookup_table_size; +static u32 dev_table_size; /* size of the device table */ +static u32 alias_table_size; /* size of the alias table */ +static u32 rlookup_table_size; /* size if the rlookup table */ +static inline void update_last_devid(u16 devid) +{ + if (devid > amd_iommu_last_bdf) + amd_iommu_last_bdf = devid; +} + +static inline unsigned long tbl_size(int entry_size) +{ + unsigned shift = PAGE_SHIFT + + get_order(amd_iommu_last_bdf * entry_size); + + return 1UL << shift; +} + +/**************************************************************************** + * + * AMD IOMMU MMIO register space handling functions + * + * These functions are used to program the IOMMU device registers in + * MMIO space required for that driver. + * + ****************************************************************************/ + +/* + * This function set the exclusion range in the IOMMU. DMA accesses to the + * exclusion range are passed through untranslated + */ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu) { u64 start = iommu->exclusion_start & PAGE_MASK; @@ -137,6 +207,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu) &entry, sizeof(entry)); } +/* Programs the physical address of the device table into the IOMMU hardware */ static void __init iommu_set_device_table(struct amd_iommu *iommu) { u32 entry; @@ -149,6 +220,7 @@ static void __init iommu_set_device_table(struct amd_iommu *iommu) &entry, sizeof(entry)); } +/* Generic functions to enable/disable certain features of the IOMMU. */ static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit) { u32 ctrl; @@ -167,6 +239,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); } +/* Function to enable the hardware */ void __init iommu_enable(struct amd_iommu *iommu) { printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at "); @@ -176,6 +249,10 @@ void __init iommu_enable(struct amd_iommu *iommu) iommu_feature_enable(iommu, CONTROL_IOMMU_EN); } +/* + * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in + * the system has one. + */ static u8 * __init iommu_map_mmio_space(u64 address) { u8 *ret; @@ -199,16 +276,33 @@ static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu) release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH); } +/**************************************************************************** + * + * The functions below belong to the first pass of AMD IOMMU ACPI table + * parsing. In this pass we try to find out the highest device id this + * code has to handle. Upon this information the size of the shared data + * structures is determined later. + * + ****************************************************************************/ + +/* + * This function reads the last device id the IOMMU has to handle from the PCI + * capability header for this IOMMU + */ static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr) { u32 cap; cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET); - UPDATE_LAST_BDF(DEVID(MMIO_GET_BUS(cap), MMIO_GET_LD(cap))); + update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap))); return 0; } +/* + * After reading the highest device id from the IOMMU PCI capability header + * this function looks if there is a higher device id defined in the ACPI table + */ static int __init find_last_devid_from_ivhd(struct ivhd_header *h) { u8 *p = (void *)h, *end = (void *)h; @@ -229,7 +323,8 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h) case IVHD_DEV_RANGE_END: case IVHD_DEV_ALIAS: case IVHD_DEV_EXT_SELECT: - UPDATE_LAST_BDF(dev->devid); + /* all the above subfield types refer to device ids */ + update_last_devid(dev->devid); break; default: break; @@ -242,6 +337,11 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h) return 0; } +/* + * Iterate over all IVHD entries in the ACPI table and find the highest device + * id which we need to handle. This is the first of three functions which parse + * the ACPI table. So we check the checksum here. + */ static int __init find_last_devid_acpi(struct acpi_table_header *table) { int i; @@ -277,19 +377,31 @@ static int __init find_last_devid_acpi(struct acpi_table_header *table) return 0; } +/**************************************************************************** + * + * The following functions belong the the code path which parses the ACPI table + * the second time. In this ACPI parsing iteration we allocate IOMMU specific + * data structures, initialize the device/alias/rlookup table and also + * basically initialize the hardware. + * + ****************************************************************************/ + +/* + * Allocates the command buffer. This buffer is per AMD IOMMU. We can + * write commands to that buffer later and the IOMMU will execute them + * asynchronously + */ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu) { - u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL, + u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(CMD_BUFFER_SIZE)); - u64 entry = 0; + u64 entry; if (cmd_buf == NULL) return NULL; iommu->cmd_buf_size = CMD_BUFFER_SIZE; - memset(cmd_buf, 0, CMD_BUFFER_SIZE); - entry = (u64)virt_to_phys(cmd_buf); entry |= MMIO_CMD_SIZE_512; memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET, @@ -302,11 +414,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu) static void __init free_command_buffer(struct amd_iommu *iommu) { - if (iommu->cmd_buf) - free_pages((unsigned long)iommu->cmd_buf, - get_order(CMD_BUFFER_SIZE)); + free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE)); } +/* sets a specific bit in the device table entry. */ static void set_dev_entry_bit(u16 devid, u8 bit) { int i = (bit >> 5) & 0x07; @@ -315,7 +426,18 @@ static void set_dev_entry_bit(u16 devid, u8 bit) amd_iommu_dev_table[devid].data[i] |= (1 << _bit); } -static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags) +/* Writes the specific IOMMU for a device into the rlookup table */ +static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) +{ + amd_iommu_rlookup_table[devid] = iommu; +} + +/* + * This function takes the device specific flags read from the ACPI + * table and sets up the device table entry with that information + */ +static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu, + u16 devid, u32 flags, u32 ext_flags) { if (flags & ACPI_DEVFLAG_INITPASS) set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS); @@ -331,13 +453,14 @@ static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags) set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS); if (flags & ACPI_DEVFLAG_LINT1) set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS); -} -static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) -{ - amd_iommu_rlookup_table[devid] = iommu; + set_iommu_for_device(iommu, devid); } +/* + * Reads the device exclusion range from ACPI and initialize IOMMU with + * it + */ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) { struct amd_iommu *iommu = amd_iommu_rlookup_table[devid]; @@ -346,12 +469,22 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m) return; if (iommu) { + /* + * We only can configure exclusion ranges per IOMMU, not + * per device. But we can enable the exclusion range per + * device. This is done here + */ set_dev_entry_bit(m->devid, DEV_ENTRY_EX); iommu->exclusion_start = m->range_start; iommu->exclusion_length = m->range_length; } } +/* + * This function reads some important data from the IOMMU PCI space and + * initializes the driver data structure with it. It reads the hardware + * capabilities and the first/last device entries + */ static void __init init_iommu_from_pci(struct amd_iommu *iommu) { int bus = PCI_BUS(iommu->devid); @@ -363,10 +496,16 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu) iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET); range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET); - iommu->first_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_FD(range)); - iommu->last_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_LD(range)); + iommu->first_device = calc_devid(MMIO_GET_BUS(range), + MMIO_GET_FD(range)); + iommu->last_device = calc_devid(MMIO_GET_BUS(range), + MMIO_GET_LD(range)); } +/* + * Takes a pointer to an AMD IOMMU entry in the ACPI table and + * initializes the hardware and our data structures with it. + */ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, struct ivhd_header *h) { @@ -374,7 +513,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, u8 *end = p, flags = 0; u16 dev_i, devid = 0, devid_start = 0, devid_to = 0; u32 ext_flags = 0; - bool alias = 0; + bool alias = false; struct ivhd_entry *e; /* @@ -414,22 +553,23 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, case IVHD_DEV_ALL: for (dev_i = iommu->first_device; dev_i <= iommu->last_device; ++dev_i) - set_dev_entry_from_acpi(dev_i, e->flags, 0); + set_dev_entry_from_acpi(iommu, dev_i, + e->flags, 0); break; case IVHD_DEV_SELECT: devid = e->devid; - set_dev_entry_from_acpi(devid, e->flags, 0); + set_dev_entry_from_acpi(iommu, devid, e->flags, 0); break; case IVHD_DEV_SELECT_RANGE_START: devid_start = e->devid; flags = e->flags; ext_flags = 0; - alias = 0; + alias = false; break; case IVHD_DEV_ALIAS: devid = e->devid; devid_to = e->ext >> 8; - set_dev_entry_from_acpi(devid, e->flags, 0); + set_dev_entry_from_acpi(iommu, devid, e->flags, 0); amd_iommu_alias_table[devid] = devid_to; break; case IVHD_DEV_ALIAS_RANGE: @@ -437,24 +577,25 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, flags = e->flags; devid_to = e->ext >> 8; ext_flags = 0; - alias = 1; + alias = true; break; case IVHD_DEV_EXT_SELECT: devid = e->devid; - set_dev_entry_from_acpi(devid, e->flags, e->ext); + set_dev_entry_from_acpi(iommu, devid, e->flags, + e->ext); break; case IVHD_DEV_EXT_SELECT_RANGE: devid_start = e->devid; flags = e->flags; ext_flags = e->ext; - alias = 0; + alias = false; break; case IVHD_DEV_RANGE_END: devid = e->devid; for (dev_i = devid_start; dev_i <= devid; ++dev_i) { if (alias) amd_iommu_alias_table[dev_i] = devid_to; - set_dev_entry_from_acpi( + set_dev_entry_from_acpi(iommu, amd_iommu_alias_table[dev_i], flags, ext_flags); } @@ -467,6 +608,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, } } +/* Initializes the device->iommu mapping for the driver */ static int __init init_iommu_devices(struct amd_iommu *iommu) { u16 i; @@ -494,6 +636,11 @@ static void __init free_iommu_all(void) } } +/* + * This function clues the initialization function for one IOMMU + * together and also allocates the command buffer and programs the + * hardware. It does NOT enable the IOMMU. This is done afterwards. + */ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h) { spin_lock_init(&iommu->lock); @@ -521,6 +668,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h) return 0; } +/* + * Iterates over all IOMMU entries in the ACPI table, allocates the + * IOMMU structure and initializes it with init_iommu_one() + */ static int __init init_iommu_all(struct acpi_table_header *table) { u8 *p = (u8 *)table, *end = (u8 *)table; @@ -528,8 +679,6 @@ static int __init init_iommu_all(struct acpi_table_header *table) struct amd_iommu *iommu; int ret; - INIT_LIST_HEAD(&amd_iommu_list); - end += table->length; p += IVRS_HEADER_LENGTH; @@ -555,6 +704,14 @@ static int __init init_iommu_all(struct acpi_table_header *table) return 0; } +/**************************************************************************** + * + * The next functions belong to the third pass of parsing the ACPI + * table. In this last pass the memory mapping requirements are + * gathered (like exclusion and unity mapping reanges). + * + ****************************************************************************/ + static void __init free_unity_maps(void) { struct unity_map_entry *entry, *next; @@ -565,6 +722,7 @@ static void __init free_unity_maps(void) } } +/* called when we find an exclusion range definition in ACPI */ static int __init init_exclusion_range(struct ivmd_header *m) { int i; @@ -574,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m) set_device_exclusion_range(m->devid, m); break; case ACPI_IVMD_TYPE_ALL: - for (i = 0; i < amd_iommu_last_bdf; ++i) + for (i = 0; i <= amd_iommu_last_bdf; ++i) set_device_exclusion_range(i, m); break; case ACPI_IVMD_TYPE_RANGE: @@ -588,6 +746,7 @@ static int __init init_exclusion_range(struct ivmd_header *m) return 0; } +/* called for unity map ACPI definition */ static int __init init_unity_map_range(struct ivmd_header *m) { struct unity_map_entry *e = 0; @@ -619,13 +778,12 @@ static int __init init_unity_map_range(struct ivmd_header *m) return 0; } +/* iterates over all memory definitions we find in the ACPI table */ static int __init init_memory_definitions(struct acpi_table_header *table) { u8 *p = (u8 *)table, *end = (u8 *)table; struct ivmd_header *m; - INIT_LIST_HEAD(&amd_iommu_unity_map); - end += table->length; p += IVRS_HEADER_LENGTH; @@ -642,6 +800,10 @@ static int __init init_memory_definitions(struct acpi_table_header *table) return 0; } +/* + * This function finally enables all IOMMUs found in the system after + * they have been initialized + */ static void __init enable_iommus(void) { struct amd_iommu *iommu; @@ -678,6 +840,34 @@ static struct sys_device device_amd_iommu = { .cls = &amd_iommu_sysdev_class, }; +/* + * This is the core init function for AMD IOMMU hardware in the system. + * This function is called from the generic x86 DMA layer initialization + * code. + * + * This function basically parses the ACPI table for AMD IOMMU (IVRS) + * three times: + * + * 1 pass) Find the highest PCI device id the driver has to handle. + * Upon this information the size of the data structures is + * determined that needs to be allocated. + * + * 2 pass) Initialize the data structures just allocated with the + * information in the ACPI table about available AMD IOMMUs + * in the system. It also maps the PCI devices in the + * system to specific IOMMUs + * + * 3 pass) After the basic data structures are allocated and + * initialized we update them with information about memory + * remapping requirements parsed out of the ACPI table in + * this last pass. + * + * After that the hardware is initialized and ready to go. In the last + * step we do some Linux specific things like registering the driver in + * the dma_ops interface and initializing the suspend/resume support + * functions. Finally it prints some information about AMD IOMMUs and + * the driver state and enables the hardware. + */ int __init amd_iommu_init(void) { int i, ret = 0; @@ -699,14 +889,14 @@ int __init amd_iommu_init(void) if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0) return -ENODEV; - dev_table_size = TBL_SIZE(DEV_TABLE_ENTRY_SIZE); - alias_table_size = TBL_SIZE(ALIAS_TABLE_ENTRY_SIZE); - rlookup_table_size = TBL_SIZE(RLOOKUP_TABLE_ENTRY_SIZE); + dev_table_size = tbl_size(DEV_TABLE_ENTRY_SIZE); + alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE); + rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE); ret = -ENOMEM; /* Device table - directly used by all IOMMUs */ - amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL, + amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(dev_table_size)); if (amd_iommu_dev_table == NULL) goto out; @@ -730,27 +920,23 @@ int __init amd_iommu_init(void) * Protection Domain table - maps devices to protection domains * This table has the same size as the rlookup_table */ - amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL, + amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(rlookup_table_size)); if (amd_iommu_pd_table == NULL) goto free; - amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(GFP_KERNEL, + amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages( + GFP_KERNEL | __GFP_ZERO, get_order(MAX_DOMAIN_ID/8)); if (amd_iommu_pd_alloc_bitmap == NULL) goto free; /* - * memory is allocated now; initialize the device table with all zeroes - * and let all alias entries point to itself + * let all alias entries point to itself */ - memset(amd_iommu_dev_table, 0, dev_table_size); - for (i = 0; i < amd_iommu_last_bdf; ++i) + for (i = 0; i <= amd_iommu_last_bdf; ++i) amd_iommu_alias_table[i] = i; - memset(amd_iommu_pd_table, 0, rlookup_table_size); - memset(amd_iommu_pd_alloc_bitmap, 0, MAX_DOMAIN_ID / 8); - /* * never allocate domain 0 because its used as the non-allocated and * error value placeholder @@ -795,24 +981,19 @@ out: return ret; free: - if (amd_iommu_pd_alloc_bitmap) - free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1); + free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1); - if (amd_iommu_pd_table) - free_pages((unsigned long)amd_iommu_pd_table, - get_order(rlookup_table_size)); + free_pages((unsigned long)amd_iommu_pd_table, + get_order(rlookup_table_size)); - if (amd_iommu_rlookup_table) - free_pages((unsigned long)amd_iommu_rlookup_table, - get_order(rlookup_table_size)); + free_pages((unsigned long)amd_iommu_rlookup_table, + get_order(rlookup_table_size)); - if (amd_iommu_alias_table) - free_pages((unsigned long)amd_iommu_alias_table, - get_order(alias_table_size)); + free_pages((unsigned long)amd_iommu_alias_table, + get_order(alias_table_size)); - if (amd_iommu_dev_table) - free_pages((unsigned long)amd_iommu_dev_table, - get_order(dev_table_size)); + free_pages((unsigned long)amd_iommu_dev_table, + get_order(dev_table_size)); free_iommu_all(); @@ -821,6 +1002,13 @@ free: goto out; } +/**************************************************************************** + * + * Early detect code. This code runs at IOMMU detection time in the DMA + * layer. It just looks if there is an IVRS ACPI table to detect AMD + * IOMMUs + * + ****************************************************************************/ static int __init early_amd_iommu_detect(struct acpi_table_header *table) { return 0; @@ -828,7 +1016,7 @@ static int __init early_amd_iommu_detect(struct acpi_table_header *table) void __init amd_iommu_detect(void) { - if (swiotlb || no_iommu || iommu_detected) + if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture)) return; if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) { @@ -841,6 +1029,13 @@ void __init amd_iommu_detect(void) } } +/**************************************************************************** + * + * Parsing functions for the AMD IOMMU specific kernel command line + * options. + * + ****************************************************************************/ + static int __init parse_amd_iommu_options(char *str) { for (; *str; ++str) { @@ -853,20 +1048,10 @@ static int __init parse_amd_iommu_options(char *str) static int __init parse_amd_iommu_size_options(char *str) { - for (; *str; ++str) { - if (strcmp(str, "32M") == 0) - amd_iommu_aperture_order = 25; - if (strcmp(str, "64M") == 0) - amd_iommu_aperture_order = 26; - if (strcmp(str, "128M") == 0) - amd_iommu_aperture_order = 27; - if (strcmp(str, "256M") == 0) - amd_iommu_aperture_order = 28; - if (strcmp(str, "512M") == 0) - amd_iommu_aperture_order = 29; - if (strcmp(str, "1G") == 0) - amd_iommu_aperture_order = 30; - } + unsigned order = PAGE_SHIFT + get_order(memparse(str, &str)); + + if ((order > 24) && (order < 31)) + amd_iommu_aperture_order = order; return 1; } |
