1 files changed, 0 insertions, 643 deletions
diff --git a/arch/x86/crypto/crct10dif-pcl-asm_64.S b/arch/x86/crypto/crct10dif-pcl-asm_64.S
deleted file mode 100644
index 35e9756..0000000
--- a/arch/x86/crypto/crct10dif-pcl-asm_64.S
+++ /dev/null
@@ -1,643 +0,0 @@
-########################################################################
-# Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
-#
-# Copyright (c) 2013, Intel Corporation
-#
-# Authors:
-#     Erdinc Ozturk <erdinc.ozturk@intel.com>
-#     Vinodh Gopal <vinodh.gopal@intel.com>
-#     James Guilford <james.guilford@intel.com>
-#     Tim Chen <tim.c.chen@linux.intel.com>
-#
-# This software is available to you under a choice of one of two
-# licenses.  You may choose to be licensed under the terms of the GNU
-# General Public License (GPL) Version 2, available from the file
-# COPYING in the main directory of this source tree, or the
-# OpenIB.org BSD license below:
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are
-# met:
-#
-# * Redistributions of source code must retain the above copyright
-#   notice, this list of conditions and the following disclaimer.
-#
-# * Redistributions in binary form must reproduce the above copyright
-#   notice, this list of conditions and the following disclaimer in the
-#   documentation and/or other materials provided with the
-#   distribution.
-#
-# * Neither the name of the Intel Corporation nor the names of its
-#   contributors may be used to endorse or promote products derived from
-#   this software without specific prior written permission.
-#
-#
-# THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
-# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-########################################################################
-#       Function API:
-#       UINT16 crc_t10dif_pcl(
-#               UINT16 init_crc, //initial CRC value, 16 bits
-#               const unsigned char *buf, //buffer pointer to calculate CRC on
-#               UINT64 len //buffer length in bytes (64-bit data)
-#       );
-#
-#       Reference paper titled "Fast CRC Computation for Generic
-#	Polynomials Using PCLMULQDQ Instruction"
-#       URL: http://www.intel.com/content/dam/www/public/us/en/documents
-#  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
-#
-#
-
-#include <linux/linkage.h>
-
-.text
-
-#define        arg1 %rdi
-#define        arg2 %rsi
-#define        arg3 %rdx
-
-#define        arg1_low32 %edi
-
-ENTRY(crc_t10dif_pcl)
-.align 16
-
-	# adjust the 16-bit initial_crc value, scale it to 32 bits
-	shl	$16, arg1_low32
-
-	# Allocate Stack Space
-	mov     %rsp, %rcx
-	sub	$16*2, %rsp
-	# align stack to 16 byte boundary
-	and     $~(0x10 - 1), %rsp
-
-	# check if smaller than 256
-	cmp	$256, arg3
-
-	# for sizes less than 128, we can't fold 64B at a time...
-	jl	_less_than_128
-
-
-	# load the initial crc value
-	movd	arg1_low32, %xmm10	# initial crc
-
-	# crc value does not need to be byte-reflected, but it needs
-	# to be moved to the high part of the register.
-	# because data will be byte-reflected and will align with
-	# initial crc at correct place.
-	pslldq	$12, %xmm10
-
-	movdqa  SHUF_MASK(%rip), %xmm11
-	# receive the initial 64B data, xor the initial crc value
-	movdqu	16*0(arg2), %xmm0
-	movdqu	16*1(arg2), %xmm1
-	movdqu	16*2(arg2), %xmm2
-	movdqu	16*3(arg2), %xmm3
-	movdqu	16*4(arg2), %xmm4
-	movdqu	16*5(arg2), %xmm5
-	movdqu	16*6(arg2), %xmm6
-	movdqu	16*7(arg2), %xmm7
-
-	pshufb	%xmm11, %xmm0
-	# XOR the initial_crc value
-	pxor	%xmm10, %xmm0
-	pshufb	%xmm11, %xmm1
-	pshufb	%xmm11, %xmm2
-	pshufb	%xmm11, %xmm3
-	pshufb	%xmm11, %xmm4
-	pshufb	%xmm11, %xmm5
-	pshufb	%xmm11, %xmm6
-	pshufb	%xmm11, %xmm7
-
-	movdqa	rk3(%rip), %xmm10	#xmm10 has rk3 and rk4
-					#imm value of pclmulqdq instruction
-					#will determine which constant to use
-
-	#################################################################
-	# we subtract 256 instead of 128 to save one instruction from the loop
-	sub	$256, arg3
-
-	# at this section of the code, there is 64*x+y (0<=y<64) bytes of
-	# buffer. The _fold_64_B_loop will fold 64B at a time
-	# until we have 64+y Bytes of buffer
-
-
-	# fold 64B at a time. This section of the code folds 4 xmm
-	# registers in parallel
-_fold_64_B_loop:
-
-	# update the buffer pointer
-	add	$128, arg2		#    buf += 64#
-
-	movdqu	16*0(arg2), %xmm9
-	movdqu	16*1(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm0, %xmm8
-	movdqa	%xmm1, %xmm13
-	pclmulqdq	$0x0 , %xmm10, %xmm0
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0 , %xmm10, %xmm1
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 , %xmm0
-	xorps	%xmm8 , %xmm0
-	pxor	%xmm12, %xmm1
-	xorps	%xmm13, %xmm1
-
-	movdqu	16*2(arg2), %xmm9
-	movdqu	16*3(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm2, %xmm8
-	movdqa	%xmm3, %xmm13
-	pclmulqdq	$0x0, %xmm10, %xmm2
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0, %xmm10, %xmm3
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 , %xmm2
-	xorps	%xmm8 , %xmm2
-	pxor	%xmm12, %xmm3
-	xorps	%xmm13, %xmm3
-
-	movdqu	16*4(arg2), %xmm9
-	movdqu	16*5(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm4, %xmm8
-	movdqa	%xmm5, %xmm13
-	pclmulqdq	$0x0,  %xmm10, %xmm4
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0,  %xmm10, %xmm5
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 ,  %xmm4
-	xorps	%xmm8 ,  %xmm4
-	pxor	%xmm12,  %xmm5
-	xorps	%xmm13,  %xmm5
-
-	movdqu	16*6(arg2), %xmm9
-	movdqu	16*7(arg2), %xmm12
-	pshufb	%xmm11, %xmm9
-	pshufb	%xmm11, %xmm12
-	movdqa	%xmm6 , %xmm8
-	movdqa	%xmm7 , %xmm13
-	pclmulqdq	$0x0 , %xmm10, %xmm6
-	pclmulqdq	$0x11, %xmm10, %xmm8
-	pclmulqdq	$0x0 , %xmm10, %xmm7
-	pclmulqdq	$0x11, %xmm10, %xmm13
-	pxor	%xmm9 , %xmm6
-	xorps	%xmm8 , %xmm6
-	pxor	%xmm12, %xmm7
-	xorps	%xmm13, %xmm7
-
-	sub	$128, arg3
-
-	# check if there is another 64B in the buffer to be able to fold
-	jge	_fold_64_B_loop
-	##################################################################
-
-
-	add	$128, arg2
-	# at this point, the buffer pointer is pointing at the last y Bytes
-	# of the buffer the 64B of folded data is in 4 of the xmm
-	# registers: xmm0, xmm1, xmm2, xmm3
-
-
-	# fold the 8 xmm registers to 1 xmm register with different constants
-
-	movdqa	rk9(%rip), %xmm10
-	movdqa	%xmm0, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm0
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm0, %xmm7
-
-	movdqa	rk11(%rip), %xmm10
-	movdqa	%xmm1, %xmm8
-	pclmulqdq	 $0x11, %xmm10, %xmm1
-	pclmulqdq	 $0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm1, %xmm7
-
-	movdqa	rk13(%rip), %xmm10
-	movdqa	%xmm2, %xmm8
-	pclmulqdq	 $0x11, %xmm10, %xmm2
-	pclmulqdq	 $0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm2, %xmm7
-
-	movdqa	rk15(%rip), %xmm10
-	movdqa	%xmm3, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm3
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm3, %xmm7
-
-	movdqa	rk17(%rip), %xmm10
-	movdqa	%xmm4, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm4
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm4, %xmm7
-
-	movdqa	rk19(%rip), %xmm10
-	movdqa	%xmm5, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm5
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	xorps	%xmm5, %xmm7
-
-	movdqa	rk1(%rip), %xmm10	#xmm10 has rk1 and rk2
-					#imm value of pclmulqdq instruction
-					#will determine which constant to use
-	movdqa	%xmm6, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm6
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm6, %xmm7
-
-
-	# instead of 64, we add 48 to the loop counter to save 1 instruction
-	# from the loop instead of a cmp instruction, we use the negative
-	# flag with the jl instruction
-	add	$128-16, arg3
-	jl	_final_reduction_for_128
-
-	# now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7
-	# and the rest is in memory. We can fold 16 bytes at a time if y>=16
-	# continue folding 16B at a time
-
-_16B_reduction_loop:
-	movdqa	%xmm7, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm7
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	movdqu	(arg2), %xmm0
-	pshufb	%xmm11, %xmm0
-	pxor	%xmm0 , %xmm7
-	add	$16, arg2
-	sub	$16, arg3
-	# instead of a cmp instruction, we utilize the flags with the
-	# jge instruction equivalent of: cmp arg3, 16-16
-	# check if there is any more 16B in the buffer to be able to fold
-	jge	_16B_reduction_loop
-
-	#now we have 16+z bytes left to reduce, where 0<= z < 16.
-	#first, we reduce the data in the xmm7 register
-
-
-_final_reduction_for_128:
-	# check if any more data to fold. If not, compute the CRC of
-	# the final 128 bits
-	add	$16, arg3
-	je	_128_done
-
-	# here we are getting data that is less than 16 bytes.
-	# since we know that there was data before the pointer, we can
-	# offset the input pointer before the actual point, to receive
-	# exactly 16 bytes. after that the registers need to be adjusted.
-_get_last_two_xmms:
-	movdqa	%xmm7, %xmm2
-
-	movdqu	-16(arg2, arg3), %xmm1
-	pshufb	%xmm11, %xmm1
-
-	# get rid of the extra data that was loaded before
-	# load the shift constant
-	lea	pshufb_shf_table+16(%rip), %rax
-	sub	arg3, %rax
-	movdqu	(%rax), %xmm0
-
-	# shift xmm2 to the left by arg3 bytes
-	pshufb	%xmm0, %xmm2
-
-	# shift xmm7 to the right by 16-arg3 bytes
-	pxor	mask1(%rip), %xmm0
-	pshufb	%xmm0, %xmm7
-	pblendvb	%xmm2, %xmm1	#xmm0 is implicit
-
-	# fold 16 Bytes
-	movdqa	%xmm1, %xmm2
-	movdqa	%xmm7, %xmm8
-	pclmulqdq	$0x11, %xmm10, %xmm7
-	pclmulqdq	$0x0 , %xmm10, %xmm8
-	pxor	%xmm8, %xmm7
-	pxor	%xmm2, %xmm7
-
-_128_done:
-	# compute crc of a 128-bit value
-	movdqa	rk5(%rip), %xmm10	# rk5 and rk6 in xmm10
-	movdqa	%xmm7, %xmm0
-
-	#64b fold
-	pclmulqdq	$0x1, %xmm10, %xmm7
-	pslldq	$8   ,  %xmm0
-	pxor	%xmm0,  %xmm7
-
-	#32b fold
-	movdqa	%xmm7, %xmm0
-
-	pand	mask2(%rip), %xmm0
-
-	psrldq	$12, %xmm7
-	pclmulqdq	$0x10, %xmm10, %xmm7
-	pxor	%xmm0, %xmm7
-
-	#barrett reduction
-_barrett:
-	movdqa	rk7(%rip), %xmm10	# rk7 and rk8 in xmm10
-	movdqa	%xmm7, %xmm0
-	pclmulqdq	$0x01, %xmm10, %xmm7
-	pslldq	$4, %xmm7
-	pclmulqdq	$0x11, %xmm10, %xmm7
-
-	pslldq	$4, %xmm7
-	pxor	%xmm0, %xmm7
-	pextrd	$1, %xmm7, %eax
-
-_cleanup:
-	# scale the result back to 16 bits
-	shr	$16, %eax
-	mov     %rcx, %rsp
-	ret
-
-########################################################################
-
-.align 16
-_less_than_128:
-
-	# check if there is enough buffer to be able to fold 16B at a time
-	cmp	$32, arg3
-	jl	_less_than_32
-	movdqa  SHUF_MASK(%rip), %xmm11
-
-	# now if there is, load the constants
-	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
-
-	movd	arg1_low32, %xmm0	# get the initial crc value
-	pslldq	$12, %xmm0	# align it to its correct place
-	movdqu	(arg2), %xmm7	# load the plaintext
-	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
-	pxor	%xmm0, %xmm7
-
-
-	# update the buffer pointer
-	add	$16, arg2
-
-	# update the counter. subtract 32 instead of 16 to save one
-	# instruction from the loop
-	sub	$32, arg3
-
-	jmp	_16B_reduction_loop
-
-
-.align 16
-_less_than_32:
-	# mov initial crc to the return value. this is necessary for
-	# zero-length buffers.
-	mov	arg1_low32, %eax
-	test	arg3, arg3
-	je	_cleanup
-
-	movdqa  SHUF_MASK(%rip), %xmm11
-
-	movd	arg1_low32, %xmm0	# get the initial crc value
-	pslldq	$12, %xmm0	# align it to its correct place
-
-	cmp	$16, arg3
-	je	_exact_16_left
-	jl	_less_than_16_left
-
-	movdqu	(arg2), %xmm7	# load the plaintext
-	pshufb	%xmm11, %xmm7	# byte-reflect the plaintext
-	pxor	%xmm0 , %xmm7	# xor the initial crc value
-	add	$16, arg2
-	sub	$16, arg3
-	movdqa	rk1(%rip), %xmm10	# rk1 and rk2 in xmm10
-	jmp	_get_last_two_xmms
-
-
-.align 16
-_less_than_16_left:
-	# use stack space to load data less than 16 bytes, zero-out
-	# the 16B in memory first.
-
-	pxor	%xmm1, %xmm1
-	mov	%rsp, %r11
-	movdqa	%xmm1, (%r11)
-
-	cmp	$4, arg3
-	jl	_only_less_than_4
-
-	# backup the counter value
-	mov	arg3, %r9
-	cmp	$8, arg3
-	jl	_less_than_8_left
-
-	# load 8 Bytes
-	mov	(arg2), %rax
-	mov	%rax, (%r11)
-	add	$8, %r11
-	sub	$8, arg3
-	add	$8, arg2
-_less_than_8_left:
-
-	cmp	$4, arg3
-	jl	_less_than_4_left
-
-	# load 4 Bytes
-	mov	(arg2), %eax
-	mov	%eax, (%r11)
-	add	$4, %r11
-	sub	$4, arg3
-	add	$4, arg2
-_less_than_4_left:
-
-	cmp	$2, arg3
-	jl	_less_than_2_left
-
-	# load 2 Bytes
-	mov	(arg2), %ax
-	mov	%ax, (%r11)
-	add	$2, %r11
-	sub	$2, arg3
-	add	$2, arg2
-_less_than_2_left:
-	cmp     $1, arg3
-        jl      _zero_left
-
-	# load 1 Byte
-	mov	(arg2), %al
-	mov	%al, (%r11)
-_zero_left:
-	movdqa	(%rsp), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7	# xor the initial crc value
-
-	# shl r9, 4
-	lea	pshufb_shf_table+16(%rip), %rax
-	sub	%r9, %rax
-	movdqu	(%rax), %xmm0
-	pxor	mask1(%rip), %xmm0
-
-	pshufb	%xmm0, %xmm7
-	jmp	_128_done
-
-.align 16
-_exact_16_left:
-	movdqu	(arg2), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7   # xor the initial crc value
-
-	jmp	_128_done
-
-_only_less_than_4:
-	cmp	$3, arg3
-	jl	_only_less_than_3
-
-	# load 3 Bytes
-	mov	(arg2), %al
-	mov	%al, (%r11)
-
-	mov	1(arg2), %al
-	mov	%al, 1(%r11)
-
-	mov	2(arg2), %al
-	mov	%al, 2(%r11)
-
-	movdqa	 (%rsp), %xmm7
-	pshufb	 %xmm11, %xmm7
-	pxor	 %xmm0 , %xmm7  # xor the initial crc value
-
-	psrldq	$5, %xmm7
-
-	jmp	_barrett
-_only_less_than_3:
-	cmp	$2, arg3
-	jl	_only_less_than_2
-
-	# load 2 Bytes
-	mov	(arg2), %al
-	mov	%al, (%r11)
-
-	mov	1(arg2), %al
-	mov	%al, 1(%r11)
-
-	movdqa	(%rsp), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7   # xor the initial crc value
-
-	psrldq	$6, %xmm7
-
-	jmp	_barrett
-_only_less_than_2:
-
-	# load 1 Byte
-	mov	(arg2), %al
-	mov	%al, (%r11)
-
-	movdqa	(%rsp), %xmm7
-	pshufb	%xmm11, %xmm7
-	pxor	%xmm0 , %xmm7   # xor the initial crc value
-
-	psrldq	$7, %xmm7
-
-	jmp	_barrett
-
-ENDPROC(crc_t10dif_pcl)
-
-.data
-
-# precomputed constants
-# these constants are precomputed from the poly:
-# 0x8bb70000 (0x8bb7 scaled to 32 bits)
-.align 16
-# Q = 0x18BB70000
-# rk1 = 2^(32*3) mod Q << 32
-# rk2 = 2^(32*5) mod Q << 32
-# rk3 = 2^(32*15) mod Q << 32
-# rk4 = 2^(32*17) mod Q << 32
-# rk5 = 2^(32*3) mod Q << 32
-# rk6 = 2^(32*2) mod Q << 32
-# rk7 = floor(2^64/Q)
-# rk8 = Q
-rk1:
-.quad 0x2d56000000000000
-rk2:
-.quad 0x06df000000000000
-rk3:
-.quad 0x9d9d000000000000
-rk4:
-.quad 0x7cf5000000000000
-rk5:
-.quad 0x2d56000000000000
-rk6:
-.quad 0x1368000000000000
-rk7:
-.quad 0x00000001f65a57f8
-rk8:
-.quad 0x000000018bb70000
-
-rk9:
-.quad 0xceae000000000000
-rk10:
-.quad 0xbfd6000000000000
-rk11:
-.quad 0x1e16000000000000
-rk12:
-.quad 0x713c000000000000
-rk13:
-.quad 0xf7f9000000000000
-rk14:
-.quad 0x80a6000000000000
-rk15:
-.quad 0x044c000000000000
-rk16:
-.quad 0xe658000000000000
-rk17:
-.quad 0xad18000000000000
-rk18:
-.quad 0xa497000000000000
-rk19:
-.quad 0x6ee3000000000000
-rk20:
-.quad 0xe7b5000000000000
-
-
-
-mask1:
-.octa 0x80808080808080808080808080808080
-mask2:
-.octa 0x00000000FFFFFFFFFFFFFFFFFFFFFFFF
-
-SHUF_MASK:
-.octa 0x000102030405060708090A0B0C0D0E0F
-
-pshufb_shf_table:
-# use these values for shift constants for the pshufb instruction
-# different alignments result in values as shown:
-#	DDQ 0x008f8e8d8c8b8a898887868584838281 # shl 15 (16-1) / shr1
-#	DDQ 0x01008f8e8d8c8b8a8988878685848382 # shl 14 (16-3) / shr2
-#	DDQ 0x0201008f8e8d8c8b8a89888786858483 # shl 13 (16-4) / shr3
-#	DDQ 0x030201008f8e8d8c8b8a898887868584 # shl 12 (16-4) / shr4
-#	DDQ 0x04030201008f8e8d8c8b8a8988878685 # shl 11 (16-5) / shr5
-#	DDQ 0x0504030201008f8e8d8c8b8a89888786 # shl 10 (16-6) / shr6
-#	DDQ 0x060504030201008f8e8d8c8b8a898887 # shl 9  (16-7) / shr7
-#	DDQ 0x07060504030201008f8e8d8c8b8a8988 # shl 8  (16-8) / shr8
-#	DDQ 0x0807060504030201008f8e8d8c8b8a89 # shl 7  (16-9) / shr9
-#	DDQ 0x090807060504030201008f8e8d8c8b8a # shl 6  (16-10) / shr10
-#	DDQ 0x0a090807060504030201008f8e8d8c8b # shl 5  (16-11) / shr11
-#	DDQ 0x0b0a090807060504030201008f8e8d8c # shl 4  (16-12) / shr12
-#	DDQ 0x0c0b0a090807060504030201008f8e8d # shl 3  (16-13) / shr13
-#	DDQ 0x0d0c0b0a090807060504030201008f8e # shl 2  (16-14) / shr14
-#	DDQ 0x0e0d0c0b0a090807060504030201008f # shl 1  (16-15) / shr15
-.octa 0x8f8e8d8c8b8a89888786858483828100
-.octa 0x000e0d0c0b0a09080706050403020100