summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/sim85e2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/sim85e2.c')
-rw-r--r--arch/v850/kernel/sim85e2.c195
1 files changed, 0 insertions, 195 deletions
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
deleted file mode 100644
index 566dde5..0000000
--- a/arch/v850/kernel/sim85e2.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
- * V850E2 RTL simulator
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-
-/* There are 4 possible areas we can use:
-
- IRAM (1MB) is fast for instruction fetches, but slow for data
- DRAM (1020KB) is fast for data, but slow for instructions
- ERAM is cached, so should be fast for both insns and data
- SDRAM is external DRAM, similar to ERAM
-*/
-
-#define INIT_MEMC_FOR_SDRAM
-#define USE_SDRAM_AREA
-#define KERNEL_IN_SDRAM_AREA
-
-#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WT
-/*#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
-
-#ifdef USE_SDRAM_AREA
-#define RAM_START SDRAM_ADDR
-#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
-#else
-/* When we use DRAM, we need to account for the fact that the end of it is
- used for R0_RAM. */
-#define RAM_START DRAM_ADDR
-#define RAM_END R0_RAM_ADDR
-#endif
-
-
-extern void memcons_setup (void);
-
-
-#ifdef KERNEL_IN_SDRAM_AREA
-#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
-#else
-#define EARLY_INIT_SECTION_ATTR __init
-#endif
-
-void EARLY_INIT_SECTION_ATTR mach_early_init (void)
-{
- /* The sim85e2 simulator tracks `undefined' values, so to make
- debugging easier, we begin by zeroing out all otherwise
- undefined registers. This is not strictly necessary.
-
- The registers we zero are:
- Every GPR except:
- stack-pointer (r3)
- task-pointer (r16)
- our return addr (r31)
- Every system register (SPR) that we know about except for
- the PSW (SPR 5), which we zero except for the
- disable-interrupts bit.
- */
-
- /* GPRs */
- asm volatile (" mov r0, r1 ; mov r0, r2 ");
- asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
- asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
- asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
- asm volatile (" mov r0, r17; mov r0, r18; mov r0, r19");
- asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
- asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
- asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
-
- /* SPRs */
- asm volatile ("ldsr r0, 0; ldsr r0, 1; ldsr r0, 2; ldsr r0, 3");
- asm volatile ("ldsr r0, 4");
- asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
- asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
- asm volatile ("ldsr r0, 20");
-
-
-#ifdef INIT_MEMC_FOR_SDRAM
- /* Settings for SDRAM controller. */
- V850E2_VSWC = 0x0042;
- V850E2_BSC = 0x9286;
- V850E2_BCT(0) = 0xb000; /* was: 0 */
- V850E2_BCT(1) = 0x000b;
- V850E2_ASC = 0;
- V850E2_LBS = 0xa9aa; /* was: 0xaaaa */
- V850E2_LBC(0) = 0;
- V850E2_LBC(1) = 0; /* was: 0x3 */
- V850E2_BCC = 0;
- V850E2_RFS(4) = 0x800a; /* was: 0xf109 */
- V850E2_SCR(4) = 0x2091; /* was: 0x20a1 */
- V850E2_RFS(3) = 0x800c;
- V850E2_SCR(3) = 0x20a1;
- V850E2_DWC(0) = 0;
- V850E2_DWC(1) = 0;
-#endif
-
-#if 0
-#ifdef CONFIG_V850E2_SIM85E2S
- /* Turn on the caches. */
- V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
- V850E2_BHC = 0x1010;
-#elif CONFIG_V850E2_SIM85E2C
- V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
- V850E2_BUSM_BHC = 0xFFFF;
-#endif
-#else
- V850E2_BHC = 0;
-#endif
-
- /* Don't stop the simulator at `halt' instructions. */
- SIM85E2_NOTHAL = 1;
-
- /* Ensure that the simulator halts on a panic, instead of going
- into an infinite loop inside the panic function. */
- panic_timeout = -1;
-}
-
-void __init mach_setup (char **cmdline)
-{
- memcons_setup ();
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
- *ram_start = RAM_START;
- *ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
- /* The simulator actually cycles through all interrupts
- periodically. We just pay attention to IRQ0, which gives us
- 1/64 the rate of the periodic interrupts. */
- setup_irq (0, timer_action);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
- tv->tv_sec = 0;
- tv->tv_nsec = 0;
-}
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
- { "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
- { 0 }
-};
-struct hw_interrupt_type hw_itypes[1];
-
-/* Initialize interrupts. */
-void __init mach_init_irqs (void)
-{
- v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
- SIM85E2_SIMFIN = 0; /* Halt immediately. */
- for (;;) {}
-}
-
-void machine_restart (char *__unused)
-{
- machine_halt ();
-}
-
-void machine_power_off (void)
-{
- machine_halt ();
-}
-
OpenPOWER on IntegriCloud