diff options
Diffstat (limited to 'arch/v850/kernel/sim85e2.c')
| -rw-r--r-- | arch/v850/kernel/sim85e2.c | 195 |
1 files changed, 0 insertions, 195 deletions
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c deleted file mode 100644 index 566dde5..0000000 --- a/arch/v850/kernel/sim85e2.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for - * V850E2 RTL simulator - * - * Copyright (C) 2002,03 NEC Electronics Corporation - * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/bootmem.h> -#include <linux/irq.h> - -#include <asm/atomic.h> -#include <asm/page.h> -#include <asm/machdep.h> - -#include "mach.h" - - -/* There are 4 possible areas we can use: - - IRAM (1MB) is fast for instruction fetches, but slow for data - DRAM (1020KB) is fast for data, but slow for instructions - ERAM is cached, so should be fast for both insns and data - SDRAM is external DRAM, similar to ERAM -*/ - -#define INIT_MEMC_FOR_SDRAM -#define USE_SDRAM_AREA -#define KERNEL_IN_SDRAM_AREA - -#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WT -/*#define DCACHE_MODE V850E2_CACHE_BTSC_DCM_WB_ALLOC*/ - -#ifdef USE_SDRAM_AREA -#define RAM_START SDRAM_ADDR -#define RAM_END (SDRAM_ADDR + SDRAM_SIZE) -#else -/* When we use DRAM, we need to account for the fact that the end of it is - used for R0_RAM. */ -#define RAM_START DRAM_ADDR -#define RAM_END R0_RAM_ADDR -#endif - - -extern void memcons_setup (void); - - -#ifdef KERNEL_IN_SDRAM_AREA -#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text"))) -#else -#define EARLY_INIT_SECTION_ATTR __init -#endif - -void EARLY_INIT_SECTION_ATTR mach_early_init (void) -{ - /* The sim85e2 simulator tracks `undefined' values, so to make - debugging easier, we begin by zeroing out all otherwise - undefined registers. This is not strictly necessary. - - The registers we zero are: - Every GPR except: - stack-pointer (r3) - task-pointer (r16) - our return addr (r31) - Every system register (SPR) that we know about except for - the PSW (SPR 5), which we zero except for the - disable-interrupts bit. - */ - - /* GPRs */ - asm volatile (" mov r0, r1 ; mov r0, r2 "); - asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 "); - asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11"); - asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15"); - asm volatile (" mov r0, r17; mov r0, r18; mov r0, r19"); - asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23"); - asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27"); - asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30"); - - /* SPRs */ - asm volatile ("ldsr r0, 0; ldsr r0, 1; ldsr r0, 2; ldsr r0, 3"); - asm volatile ("ldsr r0, 4"); - asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */ - asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19"); - asm volatile ("ldsr r0, 20"); - - -#ifdef INIT_MEMC_FOR_SDRAM - /* Settings for SDRAM controller. */ - V850E2_VSWC = 0x0042; - V850E2_BSC = 0x9286; - V850E2_BCT(0) = 0xb000; /* was: 0 */ - V850E2_BCT(1) = 0x000b; - V850E2_ASC = 0; - V850E2_LBS = 0xa9aa; /* was: 0xaaaa */ - V850E2_LBC(0) = 0; - V850E2_LBC(1) = 0; /* was: 0x3 */ - V850E2_BCC = 0; - V850E2_RFS(4) = 0x800a; /* was: 0xf109 */ - V850E2_SCR(4) = 0x2091; /* was: 0x20a1 */ - V850E2_RFS(3) = 0x800c; - V850E2_SCR(3) = 0x20a1; - V850E2_DWC(0) = 0; - V850E2_DWC(1) = 0; -#endif - -#if 0 -#ifdef CONFIG_V850E2_SIM85E2S - /* Turn on the caches. */ - V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE; - V850E2_BHC = 0x1010; -#elif CONFIG_V850E2_SIM85E2C - V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0); - V850E2_BUSM_BHC = 0xFFFF; -#endif -#else - V850E2_BHC = 0; -#endif - - /* Don't stop the simulator at `halt' instructions. */ - SIM85E2_NOTHAL = 1; - - /* Ensure that the simulator halts on a panic, instead of going - into an infinite loop inside the panic function. */ - panic_timeout = -1; -} - -void __init mach_setup (char **cmdline) -{ - memcons_setup (); -} - -void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len) -{ - *ram_start = RAM_START; - *ram_len = RAM_END - RAM_START; -} - -void __init mach_sched_init (struct irqaction *timer_action) -{ - /* The simulator actually cycles through all interrupts - periodically. We just pay attention to IRQ0, which gives us - 1/64 the rate of the periodic interrupts. */ - setup_irq (0, timer_action); -} - -void mach_gettimeofday (struct timespec *tv) -{ - tv->tv_sec = 0; - tv->tv_nsec = 0; -} - -/* Interrupts */ - -struct v850e_intc_irq_init irq_inits[] = { - { "IRQ", 0, NUM_MACH_IRQS, 1, 7 }, - { 0 } -}; -struct hw_interrupt_type hw_itypes[1]; - -/* Initialize interrupts. */ -void __init mach_init_irqs (void) -{ - v850e_intc_init_irq_types (irq_inits, hw_itypes); -} - - -void machine_halt (void) __attribute__ ((noreturn)); -void machine_halt (void) -{ - SIM85E2_SIMFIN = 0; /* Halt immediately. */ - for (;;) {} -} - -void machine_restart (char *__unused) -{ - machine_halt (); -} - -void machine_power_off (void) -{ - machine_halt (); -} - |
