summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/rte_cb_multi.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/rte_cb_multi.c')
-rw-r--r--arch/v850/kernel/rte_cb_multi.c121
1 files changed, 0 insertions, 121 deletions
diff --git a/arch/v850/kernel/rte_cb_multi.c b/arch/v850/kernel/rte_cb_multi.c
deleted file mode 100644
index 963d55a..0000000
--- a/arch/v850/kernel/rte_cb_multi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/rte_multi.c -- Support for Multi debugger monitor ROM
- * on Midas lab RTE-CB series of evaluation boards
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-
-#define IRQ_ADDR(irq) (0x80 + (irq) * 0x10)
-
-/* A table of which interrupt vectors to install, since blindly
- installing all of them makes the debugger stop working. This is a
- list of offsets in the interrupt vector area; each entry means to
- copy that particular 16-byte vector. An entry less than zero ends
- the table. */
-static long multi_intv_install_table[] = {
- /* Trap vectors */
- 0x40, 0x50,
-
-#ifdef CONFIG_RTE_CB_MULTI_DBTRAP
- /* Illegal insn / dbtrap. These are used by multi, so only handle
- them if configured to do so. */
- 0x60,
-#endif
-
- /* GINT1 - GINT3 (note, not GINT0!) */
- IRQ_ADDR (IRQ_GINT(1)),
- IRQ_ADDR (IRQ_GINT(2)),
- IRQ_ADDR (IRQ_GINT(3)),
-
- /* Timer D interrupts (up to 4 timers) */
- IRQ_ADDR (IRQ_INTCMD(0)),
-#if IRQ_INTCMD_NUM > 1
- IRQ_ADDR (IRQ_INTCMD(1)),
-#if IRQ_INTCMD_NUM > 2
- IRQ_ADDR (IRQ_INTCMD(2)),
-#if IRQ_INTCMD_NUM > 3
- IRQ_ADDR (IRQ_INTCMD(3)),
-#endif
-#endif
-#endif
-
- /* UART interrupts (up to 3 channels) */
- IRQ_ADDR (IRQ_INTSER (0)), /* err */
- IRQ_ADDR (IRQ_INTSR (0)), /* rx */
- IRQ_ADDR (IRQ_INTST (0)), /* tx */
-#if IRQ_INTSR_NUM > 1
- IRQ_ADDR (IRQ_INTSER (1)), /* err */
- IRQ_ADDR (IRQ_INTSR (1)), /* rx */
- IRQ_ADDR (IRQ_INTST (1)), /* tx */
-#if IRQ_INTSR_NUM > 2
- IRQ_ADDR (IRQ_INTSER (2)), /* err */
- IRQ_ADDR (IRQ_INTSR (2)), /* rx */
- IRQ_ADDR (IRQ_INTST (2)), /* tx */
-#endif
-#endif
-
- -1
-};
-
-/* Early initialization for kernel using Multi debugger ROM monitor. */
-void __init multi_init (void)
-{
- /* We're using the Multi debugger monitor, so we have to install
- the interrupt vectors. The monitor doesn't allow them to be
- initially downloaded into their final destination because
- it's in the monitor's scratch-RAM area. Unfortunately, Multi
- also doesn't deal correctly with ELF sections where the LMA
- and VMA differ -- it just ignores the LMA -- so we can't use
- that feature to work around the problem. What we do instead
- is just put the interrupt vectors into a normal section, and
- do the necessary copying and relocation here. Since the
- interrupt vector basically only contains `jr' instructions
- and no-ops, it's not that hard. */
- extern unsigned long _intv_load_start, _intv_start;
- register unsigned long *src = &_intv_load_start;
- register unsigned long *dst = (unsigned long *)INTV_BASE;
- register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
- register long *ii;
-
- /* Copy interrupt vectors as instructed by multi_intv_install_table. */
- for (ii = multi_intv_install_table; *ii >= 0; ii++) {
- /* Copy 16-byte interrupt vector at offset *ii. */
- int boffs;
- for (boffs = 0; boffs < 0x10; boffs += sizeof *src) {
- /* Copy a single word, fixing up the jump offs
- if it's a `jr' instruction. */
- int woffs = (*ii + boffs) / sizeof *src;
- unsigned long word = src[woffs];
-
- if ((word & 0xFC0) == 0x780) {
- /* A `jr' insn, fix up its offset (and yes, the
- weird half-word swapping is intentional). */
- unsigned short hi = word & 0xFFFF;
- unsigned short lo = word >> 16;
- unsigned long udisp22
- = lo + ((hi & 0x3F) << 16);
- long disp22 = (long)(udisp22 << 10) >> 10;
-
- disp22 += jr_fixup;
-
- hi = ((disp22 >> 16) & 0x3F) | 0x780;
- lo = disp22 & 0xFFFF;
-
- word = hi + (lo << 16);
- }
-
- dst[woffs] = word;
- }
- }
-}
OpenPOWER on IntegriCloud