summaryrefslogtreecommitdiffstats
path: root/arch/v850/kernel/anna.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/v850/kernel/anna.c')
-rw-r--r--arch/v850/kernel/anna.c202
1 files changed, 0 insertions, 202 deletions
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25..0000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
- mach_reserve_bootmem for details); use both as one big area. */
-#define RAM_START SRAM_ADDR
-#define RAM_END (SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph. */
-#define LEDS_PORT 0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
- ANNA_ILBEN = 0;
-
- V850E2_CSC(0) = 0x402F;
- V850E2_CSC(1) = 0x4000;
- V850E2_BPC = 0;
- V850E2_BSC = 0xAAAA;
- V850E2_BEC = 0;
-
-#if 0
- V850E2_BHC = 0xFFFF; /* icache all memory, dcache all */
-#else
- V850E2_BHC = 0; /* cache no memory */
-#endif
- V850E2_BCT(0) = 0xB088;
- V850E2_BCT(1) = 0x0008;
- V850E2_DWC(0) = 0x0027;
- V850E2_DWC(1) = 0;
- V850E2_BCC = 0x0006;
- V850E2_ASC = 0;
- V850E2_LBS = 0x0089;
- V850E2_SCR(3) = 0x21A9;
- V850E2_RFS(3) = 0x8121;
-
- v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
- ANNA_PORT_PM (LEDS_PORT) = 0; /* Make all LED pins output pins. */
- mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
- unsigned long *ram_len)
-{
- *ram_start = RAM_START;
- *ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
- /* The space between SRAM and SDRAM is filled with duplicate
- images of SRAM. Prevent the kernel from using them. */
- reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
- SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
- BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
- tv->tv_sec = 0;
- tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
- /* Start hardware timer. */
- v850e_timer_d_configure (0, HZ);
- /* Install timer interrupt handler. */
- setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
- { "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
- { "PIN", IRQ_INTP(0), IRQ_INTP_NUM, 1, 4 },
- { "CCC", IRQ_INTCCC(0), IRQ_INTCCC_NUM, 1, 5 },
- { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
- { "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM, 1, 2 },
- { "DMXER", IRQ_INTDMXER,1, 1, 2 },
- { "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM, 3, 3 },
- { "SR", IRQ_INTSR(0), IRQ_INTSR_NUM, 3, 4 },
- { "ST", IRQ_INTST(0), IRQ_INTST_NUM, 3, 5 },
- { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
- v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
- disable_reset_guard ();
-#endif
- asm ("jmp r0"); /* Jump to the reset vector. */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
- disable_reset_guard ();
-#endif
- local_irq_disable (); /* Ignore all interrupts. */
- ANNA_PORT_IO(LEDS_PORT) = 0xAA; /* Note that we halted. */
- for (;;)
- asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
- machine_halt ();
-}
-
-/* Called before configuring an on-chip UART. */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
- /* The Anna connects some general-purpose I/O pins on the CPU to
- the RTS/CTS lines of UART 1's serial connection. I/O pins P07
- and P37 are RTS and CTS respectively. */
- if (chan == 1) {
- ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
- ANNA_PORT_PM(3) |= 0x80; /* P37 in input mode */
- }
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
- clock tick display. We can't use the last bit because it's used for
- UART0's CTS output. */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
- we pick 6 and 0 as above, we get 49 cycles, which is when divided into
- the standard 100 value for HZ, gives us an almost 1s total time. */
-#define TICKS_PER_FRAME \
- (HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
- static unsigned counter = 0;
-
- if (++counter == TICKS_PER_FRAME) {
- static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
- if (dir > 0 && pos == max_pos) {
- dir = -1;
- if (max_pos == MIN_MAX_POS)
- max_pos = MAX_MAX_POS;
- else
- max_pos--;
- } else {
- if (dir < 0 && pos == 0)
- dir = 1;
-
- if (pos + dir <= max_pos) {
- /* Each bit of port 0 has a LED. */
- clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
- pos += dir;
- set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
- }
- }
-
- counter = 0;
- }
-}
OpenPOWER on IntegriCloud