summaryrefslogtreecommitdiffstats
path: root/arch/tile/lib
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/lib')
-rw-r--r--arch/tile/lib/Makefile16
-rw-r--r--arch/tile/lib/atomic_32.c330
-rw-r--r--arch/tile/lib/atomic_asm_32.S196
-rw-r--r--arch/tile/lib/cacheflush.c23
-rw-r--r--arch/tile/lib/checksum.c102
-rw-r--r--arch/tile/lib/cpumask.c52
-rw-r--r--arch/tile/lib/delay.c34
-rw-r--r--arch/tile/lib/exports.c79
-rw-r--r--arch/tile/lib/mb_incoherent.S34
-rw-r--r--arch/tile/lib/memchr_32.c68
-rw-r--r--arch/tile/lib/memcpy_32.S628
-rw-r--r--arch/tile/lib/memcpy_tile64.c271
-rw-r--r--arch/tile/lib/memmove_32.c63
-rw-r--r--arch/tile/lib/memset_32.c275
-rw-r--r--arch/tile/lib/spinlock_32.c221
-rw-r--r--arch/tile/lib/spinlock_common.h64
-rw-r--r--arch/tile/lib/strchr_32.c66
-rw-r--r--arch/tile/lib/strlen_32.c36
-rw-r--r--arch/tile/lib/uaccess.c32
-rw-r--r--arch/tile/lib/usercopy_32.S223
20 files changed, 2813 insertions, 0 deletions
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile
new file mode 100644
index 0000000..438af38
--- /dev/null
+++ b/arch/tile/lib/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for TILE-specific library files..
+#
+
+lib-y = cacheflush.o checksum.o cpumask.o delay.o \
+ mb_incoherent.o uaccess.o \
+ memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \
+ strchr_$(BITS).o strlen_$(BITS).o
+
+ifneq ($(CONFIG_TILEGX),y)
+lib-y += atomic_32.o atomic_asm_32.o memcpy_tile64.o
+endif
+
+lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o
+
+obj-$(CONFIG_MODULES) += exports.o
diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c
new file mode 100644
index 0000000..8040b42
--- /dev/null
+++ b/arch/tile/lib/atomic_32.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/cache.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/futex.h>
+#include <arch/chip.h>
+
+/* See <asm/atomic_32.h> */
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+/*
+ * A block of memory containing locks for atomic ops. Each instance of this
+ * struct will be homed on a different CPU.
+ */
+struct atomic_locks_on_cpu {
+ int lock[ATOMIC_HASH_L2_SIZE];
+} __attribute__((aligned(ATOMIC_HASH_L2_SIZE * 4)));
+
+static DEFINE_PER_CPU(struct atomic_locks_on_cpu, atomic_lock_pool);
+
+/* The locks we'll use until __init_atomic_per_cpu is called. */
+static struct atomic_locks_on_cpu __initdata initial_atomic_locks;
+
+/* Hash into this vector to get a pointer to lock for the given atomic. */
+struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE]
+ __write_once = {
+ [0 ... ATOMIC_HASH_L1_SIZE-1] (&initial_atomic_locks)
+};
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/* This page is remapped on startup to be hash-for-home. */
+int atomic_locks[PAGE_SIZE / sizeof(int) /* Only ATOMIC_HASH_SIZE is used */]
+ __attribute__((aligned(PAGE_SIZE), section(".bss.page_aligned")));
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+static inline int *__atomic_hashed_lock(volatile void *v)
+{
+ /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec.S */
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ unsigned long i =
+ (unsigned long) v & ((PAGE_SIZE-1) & -sizeof(long long));
+ unsigned long n = __insn_crc32_32(0, i);
+
+ /* Grab high bits for L1 index. */
+ unsigned long l1_index = n >> ((sizeof(n) * 8) - ATOMIC_HASH_L1_SHIFT);
+ /* Grab low bits for L2 index. */
+ unsigned long l2_index = n & (ATOMIC_HASH_L2_SIZE - 1);
+
+ return &atomic_lock_ptr[l1_index]->lock[l2_index];
+#else
+ /*
+ * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index.
+ * Using mm works here because atomic_locks is page aligned.
+ */
+ unsigned long ptr = __insn_mm((unsigned long)v >> 1,
+ (unsigned long)atomic_locks,
+ 2, (ATOMIC_HASH_SHIFT + 2) - 1);
+ return (int *)ptr;
+#endif
+}
+
+#ifdef CONFIG_SMP
+/* Return whether the passed pointer is a valid atomic lock pointer. */
+static int is_atomic_lock(int *p)
+{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ int i;
+ for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
+
+ if (p >= &atomic_lock_ptr[i]->lock[0] &&
+ p < &atomic_lock_ptr[i]->lock[ATOMIC_HASH_L2_SIZE]) {
+ return 1;
+ }
+ }
+ return 0;
+#else
+ return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE];
+#endif
+}
+
+void __atomic_fault_unlock(int *irqlock_word)
+{
+ BUG_ON(!is_atomic_lock(irqlock_word));
+ BUG_ON(*irqlock_word != 1);
+ *irqlock_word = 0;
+}
+
+#endif /* CONFIG_SMP */
+
+static inline int *__atomic_setup(volatile void *v)
+{
+ /* Issue a load to the target to bring it into cache. */
+ *(volatile int *)v;
+ return __atomic_hashed_lock(v);
+}
+
+int _atomic_xchg(atomic_t *v, int n)
+{
+ return __atomic_xchg(&v->counter, __atomic_setup(v), n).val;
+}
+EXPORT_SYMBOL(_atomic_xchg);
+
+int _atomic_xchg_add(atomic_t *v, int i)
+{
+ return __atomic_xchg_add(&v->counter, __atomic_setup(v), i).val;
+}
+EXPORT_SYMBOL(_atomic_xchg_add);
+
+int _atomic_xchg_add_unless(atomic_t *v, int a, int u)
+{
+ /*
+ * Note: argument order is switched here since it is easier
+ * to use the first argument consistently as the "old value"
+ * in the assembly, as is done for _atomic_cmpxchg().
+ */
+ return __atomic_xchg_add_unless(&v->counter, __atomic_setup(v), u, a)
+ .val;
+}
+EXPORT_SYMBOL(_atomic_xchg_add_unless);
+
+int _atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+ return __atomic_cmpxchg(&v->counter, __atomic_setup(v), o, n).val;
+}
+EXPORT_SYMBOL(_atomic_cmpxchg);
+
+unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask)
+{
+ return __atomic_or((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_or);
+
+unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask)
+{
+ return __atomic_andn((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_andn);
+
+unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask)
+{
+ return __atomic_xor((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_xor);
+
+
+u64 _atomic64_xchg(atomic64_t *v, u64 n)
+{
+ return __atomic64_xchg(&v->counter, __atomic_setup(v), n);
+}
+EXPORT_SYMBOL(_atomic64_xchg);
+
+u64 _atomic64_xchg_add(atomic64_t *v, u64 i)
+{
+ return __atomic64_xchg_add(&v->counter, __atomic_setup(v), i);
+}
+EXPORT_SYMBOL(_atomic64_xchg_add);
+
+u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+ /*
+ * Note: argument order is switched here since it is easier
+ * to use the first argument consistently as the "old value"
+ * in the assembly, as is done for _atomic_cmpxchg().
+ */
+ return __atomic64_xchg_add_unless(&v->counter, __atomic_setup(v),
+ u, a);
+}
+EXPORT_SYMBOL(_atomic64_xchg_add_unless);
+
+u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
+{
+ return __atomic64_cmpxchg(&v->counter, __atomic_setup(v), o, n);
+}
+EXPORT_SYMBOL(_atomic64_cmpxchg);
+
+
+static inline int *__futex_setup(int __user *v)
+{
+ /*
+ * Issue a prefetch to the counter to bring it into cache.
+ * As for __atomic_setup, but we can't do a read into the L1
+ * since it might fault; instead we do a prefetch into the L2.
+ */
+ __insn_prefetch(v);
+ return __atomic_hashed_lock((int __force *)v);
+}
+
+struct __get_user futex_set(int __user *v, int i)
+{
+ return __atomic_xchg((int __force *)v, __futex_setup(v), i);
+}
+
+struct __get_user futex_add(int __user *v, int n)
+{
+ return __atomic_xchg_add((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_or(int __user *v, int n)
+{
+ return __atomic_or((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_andn(int __user *v, int n)
+{
+ return __atomic_andn((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_xor(int __user *v, int n)
+{
+ return __atomic_xor((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_cmpxchg(int __user *v, int o, int n)
+{
+ return __atomic_cmpxchg((int __force *)v, __futex_setup(v), o, n);
+}
+
+/*
+ * If any of the atomic or futex routines hit a bad address (not in
+ * the page tables at kernel PL) this routine is called. The futex
+ * routines are never used on kernel space, and the normal atomics and
+ * bitops are never used on user space. So a fault on kernel space
+ * must be fatal, but a fault on userspace is a futex fault and we
+ * need to return -EFAULT. Note that the context this routine is
+ * invoked in is the context of the "_atomic_xxx()" routines called
+ * by the functions in this file.
+ */
+struct __get_user __atomic_bad_address(int __user *addr)
+{
+ if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int))))
+ panic("Bad address used for kernel atomic op: %p\n", addr);
+ return (struct __get_user) { .err = -EFAULT };
+}
+
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+static int __init noatomichash(char *str)
+{
+ pr_warning("noatomichash is deprecated.\n");
+ return 1;
+}
+__setup("noatomichash", noatomichash);
+#endif
+
+void __init __init_atomic_per_cpu(void)
+{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+ unsigned int i;
+ int actual_cpu;
+
+ /*
+ * Before this is called from setup, we just have one lock for
+ * all atomic objects/operations. Here we replace the
+ * elements of atomic_lock_ptr so that they point at per_cpu
+ * integers. This seemingly over-complex approach stems from
+ * the fact that DEFINE_PER_CPU defines an entry for each cpu
+ * in the grid, not each cpu from 0..ATOMIC_HASH_SIZE-1. But
+ * for efficient hashing of atomics to their locks we want a
+ * compile time constant power of 2 for the size of this
+ * table, so we use ATOMIC_HASH_SIZE.
+ *
+ * Here we populate atomic_lock_ptr from the per cpu
+ * atomic_lock_pool, interspersing by actual cpu so that
+ * subsequent elements are homed on consecutive cpus.
+ */
+
+ actual_cpu = cpumask_first(cpu_possible_mask);
+
+ for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
+ /*
+ * Preincrement to slightly bias against using cpu 0,
+ * which has plenty of stuff homed on it already.
+ */
+ actual_cpu = cpumask_next(actual_cpu, cpu_possible_mask);
+ if (actual_cpu >= nr_cpu_ids)
+ actual_cpu = cpumask_first(cpu_possible_mask);
+
+ atomic_lock_ptr[i] = &per_cpu(atomic_lock_pool, actual_cpu);
+ }
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+ /* Validate power-of-two and "bigger than cpus" assumption */
+ BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
+ BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids);
+
+ /*
+ * On TILEPro we prefer to use a single hash-for-home
+ * page, since this means atomic operations are less
+ * likely to encounter a TLB fault and thus should
+ * in general perform faster. You may wish to disable
+ * this in situations where few hash-for-home tiles
+ * are configured.
+ */
+ BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0);
+
+ /* The locks must all fit on one page. */
+ BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE);
+
+ /*
+ * We use the page offset of the atomic value's address as
+ * an index into atomic_locks, excluding the low 3 bits.
+ * That should not produce more indices than ATOMIC_HASH_SIZE.
+ */
+ BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+ /* The futex code makes this assumption, so we validate it here. */
+ BUG_ON(sizeof(atomic_t) != sizeof(int));
+}
diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S
new file mode 100644
index 0000000..5a5514b
--- /dev/null
+++ b/arch/tile/lib/atomic_asm_32.S
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Support routines for atomic operations. Each function takes:
+ *
+ * r0: address to manipulate
+ * r1: pointer to atomic lock guarding this operation (for FUTEX_LOCK_REG)
+ * r2: new value to write, or for cmpxchg/add_unless, value to compare against
+ * r3: (cmpxchg/xchg_add_unless) new value to write or add;
+ * (atomic64 ops) high word of value to write
+ * r4/r5: (cmpxchg64/add_unless64) new value to write or add
+ *
+ * The 32-bit routines return a "struct __get_user" so that the futex code
+ * has an opportunity to return -EFAULT to the user if needed.
+ * The 64-bit routines just return a "long long" with the value,
+ * since they are only used from kernel space and don't expect to fault.
+ * Support for 16-bit ops is included in the framework but we don't provide
+ * any (x86_64 has an atomic_inc_short(), so we might want to some day).
+ *
+ * Note that the caller is advised to issue a suitable L1 or L2
+ * prefetch on the address being manipulated to avoid extra stalls.
+ * In addition, the hot path is on two icache lines, and we start with
+ * a jump to the second line to make sure they are both in cache so
+ * that we never stall waiting on icache fill while holding the lock.
+ * (This doesn't work out with most 64-bit ops, since they consume
+ * too many bundles, so may take an extra i-cache stall.)
+ *
+ * These routines set the INTERRUPT_CRITICAL_SECTION bit, just
+ * like sys_cmpxchg(), so that NMIs like PERF_COUNT will not interrupt
+ * the code, just page faults.
+ *
+ * If the load or store faults in a way that can be directly fixed in
+ * the do_page_fault_ics() handler (e.g. a vmalloc reference) we fix it
+ * directly, return to the instruction that faulted, and retry it.
+ *
+ * If the load or store faults in a way that potentially requires us
+ * to release the atomic lock, then retry (e.g. a migrating PTE), we
+ * reset the PC in do_page_fault_ics() to the "tns" instruction so
+ * that on return we will reacquire the lock and restart the op. We
+ * are somewhat overloading the exception_table_entry notion by doing
+ * this, since those entries are not normally used for migrating PTEs.
+ *
+ * If the main page fault handler discovers a bad address, it will see
+ * the PC pointing to the "tns" instruction (due to the earlier
+ * exception_table_entry processing in do_page_fault_ics), and
+ * re-reset the PC to the fault handler, atomic_bad_address(), which
+ * effectively takes over from the atomic op and can either return a
+ * bad "struct __get_user" (for user addresses) or can just panic (for
+ * bad kernel addresses).
+ *
+ * Note that if the value we would store is the same as what we
+ * loaded, we bypass the load. Other platforms with true atomics can
+ * make the guarantee that a non-atomic __clear_bit(), for example,
+ * can safely race with an atomic test_and_set_bit(); this example is
+ * from bit_spinlock.h in slub_lock() / slub_unlock(). We can't do
+ * that on Tile since the "atomic" op is really just a
+ * read/modify/write, and can race with the non-atomic
+ * read/modify/write. However, if we can short-circuit the write when
+ * it is not needed, in the atomic case, we avoid the race.
+ */
+
+#include <linux/linkage.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+ .section .text.atomic,"ax"
+ENTRY(__start_atomic_asm_code)
+
+ .macro atomic_op, name, bitwidth, body
+ .align 64
+STD_ENTRY_SECTION(__atomic\name, .text.atomic)
+ {
+ movei r24, 1
+ j 4f /* branch to second cache line */
+ }
+1: {
+ .ifc \bitwidth,16
+ lh r22, r0
+ .else
+ lw r22, r0
+ addi r28, r0, 4
+ .endif
+ }
+ .ifc \bitwidth,64
+ lw r23, r28
+ .endif
+ \body /* set r24, and r25 if 64-bit */
+ {
+ seq r26, r22, r24
+ seq r27, r23, r25
+ }
+ .ifc \bitwidth,64
+ bbnst r27, 2f
+ .endif
+ bbs r26, 3f /* skip write-back if it's the same value */
+2: {
+ .ifc \bitwidth,16
+ sh r0, r24
+ .else
+ sw r0, r24
+ .endif
+ }
+ .ifc \bitwidth,64
+ sw r28, r25
+ .endif
+ mf
+3: {
+ move r0, r22
+ .ifc \bitwidth,64
+ move r1, r23
+ .else
+ move r1, zero
+ .endif
+ sw ATOMIC_LOCK_REG_NAME, zero
+ }
+ mtspr INTERRUPT_CRITICAL_SECTION, zero
+ jrp lr
+4: {
+ move ATOMIC_LOCK_REG_NAME, r1
+ mtspr INTERRUPT_CRITICAL_SECTION, r24
+ }
+#ifndef CONFIG_SMP
+ j 1b /* no atomic locks */
+#else
+ {
+ tns r21, ATOMIC_LOCK_REG_NAME
+ moveli r23, 2048 /* maximum backoff time in cycles */
+ }
+ {
+ bzt r21, 1b /* branch if lock acquired */
+ moveli r25, 32 /* starting backoff time in cycles */
+ }
+5: mtspr INTERRUPT_CRITICAL_SECTION, zero
+ mfspr r26, CYCLE_LOW /* get start point for this backoff */
+6: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */
+ sub r22, r22, r26
+ slt r22, r22, r25
+ bbst r22, 6b
+ {
+ mtspr INTERRUPT_CRITICAL_SECTION, r24
+ shli r25, r25, 1 /* double the backoff; retry the tns */
+ }
+ {
+ tns r21, ATOMIC_LOCK_REG_NAME
+ slt r26, r23, r25 /* is the proposed backoff too big? */
+ }
+ {
+ bzt r21, 1b /* branch if lock acquired */
+ mvnz r25, r26, r23
+ }
+ j 5b
+#endif
+ STD_ENDPROC(__atomic\name)
+ .ifc \bitwidth,32
+ .pushsection __ex_table,"a"
+ .word 1b, __atomic\name
+ .word 2b, __atomic\name
+ .word __atomic\name, __atomic_bad_address
+ .popsection
+ .endif
+ .endm
+
+atomic_op _cmpxchg, 32, "seq r26, r22, r2; { bbns r26, 3f; move r24, r3 }"
+atomic_op _xchg, 32, "move r24, r2"
+atomic_op _xchg_add, 32, "add r24, r22, r2"
+atomic_op _xchg_add_unless, 32, \
+ "sne r26, r22, r2; { bbns r26, 3f; add r24, r22, r3 }"
+atomic_op _or, 32, "or r24, r22, r2"
+atomic_op _andn, 32, "nor r2, r2, zero; and r24, r22, r2"
+atomic_op _xor, 32, "xor r24, r22, r2"
+
+atomic_op 64_cmpxchg, 64, "{ seq r26, r22, r2; seq r27, r23, r3 }; \
+ { bbns r26, 3f; move r24, r4 }; { bbns r27, 3f; move r25, r5 }"
+atomic_op 64_xchg, 64, "{ move r24, r2; move r25, r3 }"
+atomic_op 64_xchg_add, 64, "{ add r24, r22, r2; add r25, r23, r3 }; \
+ slt_u r26, r24, r22; add r25, r25, r26"
+atomic_op 64_xchg_add_unless, 64, \
+ "{ sne r26, r22, r2; sne r27, r23, r3 }; \
+ { bbns r26, 3f; add r24, r22, r4 }; \
+ { bbns r27, 3f; add r25, r23, r5 }; \
+ slt_u r26, r24, r22; add r25, r25, r26"
+
+ jrp lr /* happy backtracer */
+
+ENTRY(__end_atomic_asm_code)
diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c
new file mode 100644
index 0000000..11b6164
--- /dev/null
+++ b/arch/tile/lib/cacheflush.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <arch/icache.h>
+
+
+void __flush_icache_range(unsigned long start, unsigned long end)
+{
+ invalidate_icache((const void *)start, end - start, PAGE_SIZE);
+}
diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c
new file mode 100644
index 0000000..e4bab5b
--- /dev/null
+++ b/arch/tile/lib/checksum.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ * Support code for the main lib/checksum.c.
+ */
+
+#include <net/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned int longto16(unsigned long x)
+{
+ unsigned long ret;
+#ifdef __tilegx__
+ ret = __insn_v2sadu(x, 0);
+ ret = __insn_v2sadu(ret, 0);
+#else
+ ret = __insn_sadh_u(x, 0);
+ ret = __insn_sadh_u(ret, 0);
+#endif
+ return ret;
+}
+
+__wsum do_csum(const unsigned char *buff, int len)
+{
+ int odd, count;
+ unsigned long result = 0;
+
+ if (len <= 0)
+ goto out;
+ odd = 1 & (unsigned long) buff;
+ if (odd) {
+ result = (*buff << 8);
+ len--;
+ buff++;
+ }
+ count = len >> 1; /* nr of 16-bit words.. */
+ if (count) {
+ if (2 & (unsigned long) buff) {
+ result += *(const unsigned short *)buff;
+ count--;
+ len -= 2;
+ buff += 2;
+ }
+ count >>= 1; /* nr of 32-bit words.. */
+ if (count) {
+#ifdef __tilegx__
+ if (4 & (unsigned long) buff) {
+ unsigned int w = *(const unsigned int *)buff;
+ result = __insn_v2sadau(result, w, 0);
+ count--;
+ len -= 4;
+ buff += 4;
+ }
+ count >>= 1; /* nr of 64-bit words.. */
+#endif
+
+ /*
+ * This algorithm could wrap around for very
+ * large buffers, but those should be impossible.
+ */
+ BUG_ON(count >= 65530);
+
+ while (count) {
+ unsigned long w = *(const unsigned long *)buff;
+ count--;
+ buff += sizeof(w);
+#ifdef __tilegx__
+ result = __insn_v2sadau(result, w, 0);
+#else
+ result = __insn_sadah_u(result, w, 0);
+#endif
+ }
+#ifdef __tilegx__
+ if (len & 4) {
+ unsigned int w = *(const unsigned int *)buff;
+ result = __insn_v2sadau(result, w, 0);
+ buff += 4;
+ }
+#endif
+ }
+ if (len & 2) {
+ result += *(const unsigned short *) buff;
+ buff += 2;
+ }
+ }
+ if (len & 1)
+ result += *buff;
+ result = longto16(result);
+ if (odd)
+ result = swab16(result);
+out:
+ return result;
+}
diff --git a/arch/tile/lib/cpumask.c b/arch/tile/lib/cpumask.c
new file mode 100644
index 0000000..fdc4036
--- /dev/null
+++ b/arch/tile/lib/cpumask.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+/*
+ * Allow cropping out bits beyond the end of the array.
+ * Move to "lib" directory if more clients want to use this routine.
+ */
+int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits)
+{
+ unsigned a, b;
+
+ bitmap_zero(maskp, nmaskbits);
+ do {
+ if (!isdigit(*bp))
+ return -EINVAL;
+ a = simple_strtoul(bp, (char **)&bp, 10);
+ b = a;
+ if (*bp == '-') {
+ bp++;
+ if (!isdigit(*bp))
+ return -EINVAL;
+ b = simple_strtoul(bp, (char **)&bp, 10);
+ }
+ if (!(a <= b))
+ return -EINVAL;
+ if (b >= nmaskbits)
+ b = nmaskbits-1;
+ while (a <= b) {
+ set_bit(a, maskp);
+ a++;
+ }
+ if (*bp == ',')
+ bp++;
+ } while (*bp != '\0' && *bp != '\n');
+ return 0;
+}
diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c
new file mode 100644
index 0000000..5801b03
--- /dev/null
+++ b/arch/tile/lib/delay.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/thread_info.h>
+#include <asm/fixmap.h>
+#include <hv/hypervisor.h>
+
+void __udelay(unsigned long usecs)
+{
+ hv_nanosleep(usecs * 1000);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+ hv_nanosleep(nsecs);
+}
+EXPORT_SYMBOL(__ndelay);
+
+/* FIXME: should be declared in a header somewhere. */
+EXPORT_SYMBOL(__delay);
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
new file mode 100644
index 0000000..6bc7b52
--- /dev/null
+++ b/arch/tile/lib/exports.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Exports from assembler code and from libtile-cc.
+ */
+
+#include <linux/module.h>
+
+/* arch/tile/lib/usercopy.S */
+#include <linux/uaccess.h>
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__get_user_8);
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+EXPORT_SYMBOL(strnlen_user_asm);
+EXPORT_SYMBOL(strncpy_from_user_asm);
+EXPORT_SYMBOL(clear_user_asm);
+
+/* arch/tile/kernel/entry.S */
+#include <linux/kernel.h>
+#include <asm/processor.h>
+EXPORT_SYMBOL(current_text_addr);
+EXPORT_SYMBOL(dump_stack);
+
+/* arch/tile/lib/__memcpy.S */
+/* NOTE: on TILE64, these symbols appear in arch/tile/lib/memcpy_tile64.c */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(__copy_to_user_inatomic);
+EXPORT_SYMBOL(__copy_from_user_inatomic);
+EXPORT_SYMBOL(__copy_from_user_zeroing);
+
+/* hypervisor glue */
+#include <hv/hypervisor.h>
+EXPORT_SYMBOL(hv_dev_open);
+EXPORT_SYMBOL(hv_dev_pread);
+EXPORT_SYMBOL(hv_dev_pwrite);
+EXPORT_SYMBOL(hv_dev_close);
+
+/* -ltile-cc */
+uint32_t __udivsi3(uint32_t dividend, uint32_t divisor);
+EXPORT_SYMBOL(__udivsi3);
+int32_t __divsi3(int32_t dividend, int32_t divisor);
+EXPORT_SYMBOL(__divsi3);
+uint64_t __udivdi3(uint64_t dividend, uint64_t divisor);
+EXPORT_SYMBOL(__udivdi3);
+int64_t __divdi3(int64_t dividend, int64_t divisor);
+EXPORT_SYMBOL(__divdi3);
+uint32_t __umodsi3(uint32_t dividend, uint32_t divisor);
+EXPORT_SYMBOL(__umodsi3);
+int32_t __modsi3(int32_t dividend, int32_t divisor);
+EXPORT_SYMBOL(__modsi3);
+uint64_t __umoddi3(uint64_t dividend, uint64_t divisor);
+EXPORT_SYMBOL(__umoddi3);
+int64_t __moddi3(int64_t dividend, int64_t divisor);
+EXPORT_SYMBOL(__moddi3);
+#ifndef __tilegx__
+uint64_t __ll_mul(uint64_t n0, uint64_t n1);
+EXPORT_SYMBOL(__ll_mul);
+#endif
+#ifndef __tilegx__
+int64_t __muldi3(int64_t, int64_t);
+EXPORT_SYMBOL(__muldi3);
+uint64_t __lshrdi3(uint64_t, unsigned int);
+EXPORT_SYMBOL(__lshrdi3);
+#endif
diff --git a/arch/tile/lib/mb_incoherent.S b/arch/tile/lib/mb_incoherent.S
new file mode 100644
index 0000000..989ad7b
--- /dev/null
+++ b/arch/tile/lib/mb_incoherent.S
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Assembly code for invoking the HV's fence_incoherent syscall.
+ */
+
+#include <linux/linkage.h>
+#include <hv/syscall_public.h>
+#include <arch/abi.h>
+#include <arch/chip.h>
+
+#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
+
+/*
+ * Invoke the hypervisor's fence_incoherent syscall, which guarantees
+ * that all victims for cachelines homed on this tile have reached memory.
+ */
+STD_ENTRY(__mb_incoherent)
+ moveli TREG_SYSCALL_NR_NAME, HV_SYS_fence_incoherent
+ swint2
+ jrp lr
+ STD_ENDPROC(__mb_incoherent)
+
+#endif
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
new file mode 100644
index 0000000..6235283
--- /dev/null
+++ b/arch/tile/lib/memchr_32.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+void *memchr(const void *s, int c, size_t n)
+{
+ /* Get an aligned pointer. */
+ const uintptr_t s_int = (uintptr_t) s;
+ const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+ /* Create four copies of the byte for which we are looking. */
+ const uint32_t goal = 0x01010101 * (uint8_t) c;
+
+ /* Read the first word, but munge it so that bytes before the array
+ * will not match goal.
+ *
+ * Note that this shift count expression works because we know
+ * shift counts are taken mod 32.
+ */
+ const uint32_t before_mask = (1 << (s_int << 3)) - 1;
+ uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+
+ /* Compute the address of the last byte. */
+ const char *const last_byte_ptr = (const char *)s + n - 1;
+
+ /* Compute the address of the word containing the last byte. */
+ const uint32_t *const last_word_ptr =
+ (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
+
+ uint32_t bits;
+ char *ret;
+
+ if (__builtin_expect(n == 0, 0)) {
+ /* Don't dereference any memory if the array is empty. */
+ return NULL;
+ }
+
+ while ((bits = __insn_seqb(v, goal)) == 0) {
+ if (__builtin_expect(p == last_word_ptr, 0)) {
+ /* We already read the last word in the array,
+ * so give up.
+ */
+ return NULL;
+ }
+ v = *++p;
+ }
+
+ /* We found a match, but it might be in a byte past the end
+ * of the array.
+ */
+ ret = ((char *)p) + (__insn_ctz(bits) >> 3);
+ return (ret <= last_byte_ptr) ? ret : NULL;
+}
+EXPORT_SYMBOL(memchr);
diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
new file mode 100644
index 0000000..f92984b
--- /dev/null
+++ b/arch/tile/lib/memcpy_32.S
@@ -0,0 +1,628 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This file shares the implementation of the userspace memcpy and
+ * the kernel's memcpy, copy_to_user and copy_from_user.
+ */
+
+#include <arch/chip.h>
+
+#if CHIP_HAS_WH64() || defined(MEMCPY_TEST_WH64)
+#define MEMCPY_USE_WH64
+#endif
+
+
+#include <linux/linkage.h>
+
+/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+#define memcpy __memcpy_asm
+#define __copy_to_user_inatomic __copy_to_user_inatomic_asm
+#define __copy_from_user_inatomic __copy_from_user_inatomic_asm
+#define __copy_from_user_zeroing __copy_from_user_zeroing_asm
+#endif
+
+#define IS_MEMCPY 0
+#define IS_COPY_FROM_USER 1
+#define IS_COPY_FROM_USER_ZEROING 2
+#define IS_COPY_TO_USER -1
+
+ .section .text.memcpy_common, "ax"
+ .align 64
+
+/* Use this to preface each bundle that can cause an exception so
+ * the kernel can clean up properly. The special cleanup code should
+ * not use these, since it knows what it is doing.
+ */
+#define EX \
+ .pushsection __ex_table, "a"; \
+ .word 9f, memcpy_common_fixup; \
+ .popsection; \
+ 9
+
+
+/* __copy_from_user_inatomic takes the kernel target address in r0,
+ * the user source in r1, and the bytes to copy in r2.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ */
+ENTRY(__copy_from_user_inatomic)
+.type __copy_from_user_inatomic, @function
+ FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
+ .text.memcpy_common, \
+ .Lend_memcpy_common - __copy_from_user_inatomic)
+ { movei r29, IS_COPY_FROM_USER; j memcpy_common }
+ .size __copy_from_user_inatomic, . - __copy_from_user_inatomic
+
+/* __copy_from_user_zeroing is like __copy_from_user_inatomic, but
+ * any uncopiable bytes are zeroed in the target.
+ */
+ENTRY(__copy_from_user_zeroing)
+.type __copy_from_user_zeroing, @function
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
+ { movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common }
+ .size __copy_from_user_zeroing, . - __copy_from_user_zeroing
+
+/* __copy_to_user_inatomic takes the user target address in r0,
+ * the kernel source in r1, and the bytes to copy in r2.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ */
+ENTRY(__copy_to_user_inatomic)
+.type __copy_to_user_inatomic, @function
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
+ { movei r29, IS_COPY_TO_USER; j memcpy_common }
+ .size __copy_to_user_inatomic, . - __copy_to_user_inatomic
+
+ENTRY(memcpy)
+.type memcpy, @function
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
+ { movei r29, IS_MEMCPY }
+ .size memcpy, . - memcpy
+ /* Fall through */
+
+ .type memcpy_common, @function
+memcpy_common:
+ /* On entry, r29 holds one of the IS_* macro values from above. */
+
+
+ /* r0 is the dest, r1 is the source, r2 is the size. */
+
+ /* Save aside original dest so we can return it at the end. */
+ { sw sp, lr; move r23, r0; or r4, r0, r1 }
+
+ /* Check for an empty size. */
+ { bz r2, .Ldone; andi r4, r4, 3 }
+
+ /* Save aside original values in case of a fault. */
+ { move r24, r1; move r25, r2 }
+ move r27, lr
+
+ /* Check for an unaligned source or dest. */
+ { bnz r4, .Lcopy_unaligned_maybe_many; addli r4, r2, -256 }
+
+.Lcheck_aligned_copy_size:
+ /* If we are copying < 256 bytes, branch to simple case. */
+ { blzt r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+
+ /* Copying >= 256 bytes, so jump to complex prefetching loop. */
+ { andi r6, r1, 63; j .Lcopy_many }
+
+/*
+ *
+ * Aligned 4 byte at a time copy loop
+ *
+ */
+
+.Lcopy_8_loop:
+ /* Copy two words at a time to hide load latency. */
+EX: { lw r3, r1; addi r1, r1, 4; slti_u r8, r2, 16 }
+EX: { lw r4, r1; addi r1, r1, 4 }
+EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+EX: { sw r0, r4; addi r0, r0, 4; addi r2, r2, -4 }
+.Lcopy_8_check:
+ { bzt r8, .Lcopy_8_loop; slti_u r4, r2, 4 }
+
+ /* Copy odd leftover word, if any. */
+ { bnzt r4, .Lcheck_odd_stragglers }
+EX: { lw r3, r1; addi r1, r1, 4 }
+EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+
+.Lcheck_odd_stragglers:
+ { bnz r2, .Lcopy_unaligned_few }
+
+.Ldone:
+ /* For memcpy return original dest address, else zero. */
+ { mz r0, r29, r23; jrp lr }
+
+
+/*
+ *
+ * Prefetching multiple cache line copy handler (for large transfers).
+ *
+ */
+
+ /* Copy words until r1 is cache-line-aligned. */
+.Lalign_loop:
+EX: { lw r3, r1; addi r1, r1, 4 }
+ { andi r6, r1, 63 }
+EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+.Lcopy_many:
+ { bnzt r6, .Lalign_loop; addi r9, r0, 63 }
+
+ { addi r3, r1, 60; andi r9, r9, -64 }
+
+#ifdef MEMCPY_USE_WH64
+ /* No need to prefetch dst, we'll just do the wh64
+ * right before we copy a line.
+ */
+#endif
+
+EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, .; move r27, lr }
+EX: { lw r6, r3; addi r3, r3, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+EX: { lw r7, r3; addi r3, r3, 64 }
+#ifndef MEMCPY_USE_WH64
+ /* Prefetch the dest */
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ /* Use a real load to cause a TLB miss if necessary. We aren't using
+ * r28, so this should be fine.
+ */
+EX: { lw r28, r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
+#endif
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bz zero, .Lbig_loop2 }
+
+ /* On entry to this loop:
+ * - r0 points to the start of dst line 0
+ * - r1 points to start of src line 0
+ * - r2 >= (256 - 60), only the first time the loop trips.
+ * - r3 contains r1 + 128 + 60 [pointer to end of source line 2]
+ * This is our prefetch address. When we get near the end
+ * rather than prefetching off the end this is changed to point
+ * to some "safe" recently loaded address.
+ * - r5 contains *(r1 + 60) [i.e. last word of source line 0]
+ * - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1]
+ * - r9 contains ((r0 + 63) & -64)
+ * [start of next dst cache line.]
+ */
+
+.Lbig_loop:
+ { jal .Lcopy_line2; add r15, r1, r2 }
+
+.Lbig_loop2:
+ /* Copy line 0, first stalling until r5 is ready. */
+EX: { move r12, r5; lw r16, r1 }
+ { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+ /* Prefetch several lines ahead. */
+EX: { lw r5, r3; addi r3, r3, 64 }
+ { jal .Lcopy_line }
+
+ /* Copy line 1, first stalling until r6 is ready. */
+EX: { move r12, r6; lw r16, r1 }
+ { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+ /* Prefetch several lines ahead. */
+EX: { lw r6, r3; addi r3, r3, 64 }
+ { jal .Lcopy_line }
+
+ /* Copy line 2, first stalling until r7 is ready. */
+EX: { move r12, r7; lw r16, r1 }
+ { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+ /* Prefetch several lines ahead. */
+EX: { lw r7, r3; addi r3, r3, 64 }
+ /* Use up a caches-busy cycle by jumping back to the top of the
+ * loop. Might as well get it out of the way now.
+ */
+ { j .Lbig_loop }
+
+
+ /* On entry:
+ * - r0 points to the destination line.
+ * - r1 points to the source line.
+ * - r3 is the next prefetch address.
+ * - r9 holds the last address used for wh64.
+ * - r12 = WORD_15
+ * - r16 = WORD_0.
+ * - r17 == r1 + 16.
+ * - r27 holds saved lr to restore.
+ *
+ * On exit:
+ * - r0 is incremented by 64.
+ * - r1 is incremented by 64, unless that would point to a word
+ * beyond the end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
+ * - r2 is decremented by 64.
+ * - r3 is unchanged, unless it points to a word beyond the
+ * end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
+ * Redirecting is OK since if we are that close to the end
+ * of the array we will not come back to this subroutine
+ * and use the contents of the prefetched address.
+ * - r4 is nonzero iff r2 >= 64.
+ * - r9 is incremented by 64, unless it points beyond the
+ * end of the last full destination cache line, in which
+ * case it is redirected to a "safe address" that can be
+ * clobbered (sp - 64)
+ * - lr contains the value in r27.
+ */
+
+/* r26 unused */
+
+.Lcopy_line:
+ /* TODO: when r3 goes past the end, we would like to redirect it
+ * to prefetch the last partial cache line (if any) just once, for the
+ * benefit of the final cleanup loop. But we don't want to
+ * prefetch that line more than once, or subsequent prefetches
+ * will go into the RTF. But then .Lbig_loop should unconditionally
+ * branch to top of loop to execute final prefetch, and its
+ * nop should become a conditional branch.
+ */
+
+ /* We need two non-memory cycles here to cover the resources
+ * used by the loads initiated by the caller.
+ */
+ { add r15, r1, r2 }
+.Lcopy_line2:
+ { slt_u r13, r3, r15; addi r17, r1, 16 }
+
+ /* NOTE: this will stall for one cycle as L1 is busy. */
+
+ /* Fill second L1D line. */
+EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
+
+#ifdef MEMCPY_TEST_WH64
+ /* Issue a fake wh64 that clobbers the destination words
+ * with random garbage, for testing.
+ */
+ { movei r19, 64; crc32_32 r10, r2, r9 }
+.Lwh64_test_loop:
+EX: { sw r9, r10; addi r9, r9, 4; addi r19, r19, -4 }
+ { bnzt r19, .Lwh64_test_loop; crc32_32 r10, r10, r19 }
+#elif CHIP_HAS_WH64()
+ /* Prepare destination line for writing. */
+EX: { wh64 r9; addi r9, r9, 64 }
+#else
+ /* Prefetch dest line */
+ { prefetch r9; addi r9, r9, 64 }
+#endif
+ /* Load seven words that are L1D hits to cover wh64 L2 usage. */
+
+ /* Load the three remaining words from the last L1D line, which
+ * we know has already filled the L1D.
+ */
+EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */
+EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */
+EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */
+
+ /* Load the three remaining words from the first L1D line, first
+ * stalling until it has filled by "looking at" r16.
+ */
+EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */
+EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */
+EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */
+
+ /* Load second word from the second L1D line, first
+ * stalling until it has filled by "looking at" r17.
+ */
+EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */
+
+ /* Store last word to the destination line, potentially dirtying it
+ * for the first time, which keeps the L2 busy for two cycles.
+ */
+EX: { sw r10, r12 } /* store(WORD_15) */
+
+ /* Use two L1D hits to cover the sw L2 access above. */
+EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */
+EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */
+
+ /* Fill third L1D line. */
+EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */
+
+ /* Store first L1D line. */
+EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
+EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
+EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
+#ifdef MEMCPY_USE_WH64
+EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
+#else
+ /* Back up the r9 to a cache line we are already storing to
+ * if it gets past the end of the dest vector. Strictly speaking,
+ * we don't need to back up to the start of a cache line, but it's free
+ * and tidy, so why not?
+ */
+EX: { sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
+#endif
+ /* Store second L1D line. */
+EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
+EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */
+EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */
+EX: { sw r0, r12; addi r0, r0, 4 } /* store(WORD_7) */
+
+EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */
+EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */
+EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */
+
+ /* Store third L1D line. */
+EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */
+EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */
+EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */
+EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */
+
+ /* Store rest of fourth L1D line. */
+EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */
+ {
+EX: sw r0, r8 /* store(WORD_13) */
+ addi r0, r0, 4
+ /* Will r2 be > 64 after we subtract 64 below? */
+ shri r4, r2, 7
+ }
+ {
+EX: sw r0, r11 /* store(WORD_14) */
+ addi r0, r0, 8
+ /* Record 64 bytes successfully copied. */
+ addi r2, r2, -64
+ }
+
+ { jrp lr; move lr, r27 }
+
+ /* Convey to the backtrace library that the stack frame is size
+ * zero, and the real return address is on the stack rather than
+ * in 'lr'.
+ */
+ { info 8 }
+
+ .align 64
+.Lcopy_unaligned_maybe_many:
+ /* Skip the setup overhead if we aren't copying many bytes. */
+ { slti_u r8, r2, 20; sub r4, zero, r0 }
+ { bnzt r8, .Lcopy_unaligned_few; andi r4, r4, 3 }
+ { bz r4, .Ldest_is_word_aligned; add r18, r1, r2 }
+
+/*
+ *
+ * unaligned 4 byte at a time copy handler.
+ *
+ */
+
+ /* Copy single bytes until r0 == 0 mod 4, so we can store words. */
+.Lalign_dest_loop:
+EX: { lb_u r3, r1; addi r1, r1, 1; addi r4, r4, -1 }
+EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r4, .Lalign_dest_loop; andi r3, r1, 3 }
+
+ /* If source and dest are now *both* aligned, do an aligned copy. */
+ { bz r3, .Lcheck_aligned_copy_size; addli r4, r2, -256 }
+
+.Ldest_is_word_aligned:
+
+#if CHIP_HAS_DWORD_ALIGN()
+EX: { andi r8, r0, 63; lwadd_na r6, r1, 4}
+ { slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned }
+
+ /* This copies unaligned words until either there are fewer
+ * than 4 bytes left to copy, or until the destination pointer
+ * is cache-aligned, whichever comes first.
+ *
+ * On entry:
+ * - r0 is the next store address.
+ * - r1 points 4 bytes past the load address corresponding to r0.
+ * - r2 >= 4
+ * - r6 is the next aligned word loaded.
+ */
+.Lcopy_unaligned_src_words:
+EX: { lwadd_na r7, r1, 4; slti_u r8, r2, 4 + 4 }
+ /* stall */
+ { dword_align r6, r7, r1; slti_u r9, r2, 64 + 4 }
+EX: { swadd r0, r6, 4; addi r2, r2, -4 }
+ { bnz r8, .Lcleanup_unaligned_words; andi r8, r0, 63 }
+ { bnzt r8, .Lcopy_unaligned_src_words; move r6, r7 }
+
+ /* On entry:
+ * - r0 is the next store address.
+ * - r1 points 4 bytes past the load address corresponding to r0.
+ * - r2 >= 4 (# of bytes left to store).
+ * - r6 is the next aligned src word value.
+ * - r9 = (r2 < 64U).
+ * - r18 points one byte past the end of source memory.
+ */
+.Ldest_is_L2_line_aligned:
+
+ {
+ /* Not a full cache line remains. */
+ bnz r9, .Lcleanup_unaligned_words
+ move r7, r6
+ }
+
+ /* r2 >= 64 */
+
+ /* Kick off two prefetches, but don't go past the end. */
+ { addi r3, r1, 63 - 4; addi r8, r1, 64 + 63 - 4 }
+ { prefetch r3; move r3, r8; slt_u r8, r8, r18 }
+ { mvz r3, r8, r1; addi r8, r3, 64 }
+ { prefetch r3; move r3, r8; slt_u r8, r8, r18 }
+ { mvz r3, r8, r1; movei r17, 0 }
+
+.Lcopy_unaligned_line:
+ /* Prefetch another line. */
+ { prefetch r3; addi r15, r1, 60; addi r3, r3, 64 }
+ /* Fire off a load of the last word we are about to copy. */
+EX: { lw_na r15, r15; slt_u r8, r3, r18 }
+
+EX: { mvz r3, r8, r1; wh64 r0 }
+
+ /* This loop runs twice.
+ *
+ * On entry:
+ * - r17 is even before the first iteration, and odd before
+ * the second. It is incremented inside the loop. Encountering
+ * an even value at the end of the loop makes it stop.
+ */
+.Lcopy_half_an_unaligned_line:
+EX: {
+ /* Stall until the last byte is ready. In the steady state this
+ * guarantees all words to load below will be in the L2 cache, which
+ * avoids shunting the loads to the RTF.
+ */
+ move zero, r15
+ lwadd_na r7, r1, 16
+ }
+EX: { lwadd_na r11, r1, 12 }
+EX: { lwadd_na r14, r1, -24 }
+EX: { lwadd_na r8, r1, 4 }
+EX: { lwadd_na r9, r1, 4 }
+EX: {
+ lwadd_na r10, r1, 8
+ /* r16 = (r2 < 64), after we subtract 32 from r2 below. */
+ slti_u r16, r2, 64 + 32
+ }
+EX: { lwadd_na r12, r1, 4; addi r17, r17, 1 }
+EX: { lwadd_na r13, r1, 8; dword_align r6, r7, r1 }
+EX: { swadd r0, r6, 4; dword_align r7, r8, r1 }
+EX: { swadd r0, r7, 4; dword_align r8, r9, r1 }
+EX: { swadd r0, r8, 4; dword_align r9, r10, r1 }
+EX: { swadd r0, r9, 4; dword_align r10, r11, r1 }
+EX: { swadd r0, r10, 4; dword_align r11, r12, r1 }
+EX: { swadd r0, r11, 4; dword_align r12, r13, r1 }
+EX: { swadd r0, r12, 4; dword_align r13, r14, r1 }
+EX: { swadd r0, r13, 4; addi r2, r2, -32 }
+ { move r6, r14; bbst r17, .Lcopy_half_an_unaligned_line }
+
+ { bzt r16, .Lcopy_unaligned_line; move r7, r6 }
+
+ /* On entry:
+ * - r0 is the next store address.
+ * - r1 points 4 bytes past the load address corresponding to r0.
+ * - r2 >= 0 (# of bytes left to store).
+ * - r7 is the next aligned src word value.
+ */
+.Lcleanup_unaligned_words:
+ /* Handle any trailing bytes. */
+ { bz r2, .Lcopy_unaligned_done; slti_u r8, r2, 4 }
+ { bzt r8, .Lcopy_unaligned_src_words; move r6, r7 }
+
+ /* Move r1 back to the point where it corresponds to r0. */
+ { addi r1, r1, -4 }
+
+#else /* !CHIP_HAS_DWORD_ALIGN() */
+
+ /* Compute right/left shift counts and load initial source words. */
+ { andi r5, r1, -4; andi r3, r1, 3 }
+EX: { lw r6, r5; addi r5, r5, 4; shli r3, r3, 3 }
+EX: { lw r7, r5; addi r5, r5, 4; sub r4, zero, r3 }
+
+ /* Load and store one word at a time, using shifts and ORs
+ * to correct for the misaligned src.
+ */
+.Lcopy_unaligned_src_loop:
+ { shr r6, r6, r3; shl r8, r7, r4 }
+EX: { lw r7, r5; or r8, r8, r6; move r6, r7 }
+EX: { sw r0, r8; addi r0, r0, 4; addi r2, r2, -4 }
+ { addi r5, r5, 4; slti_u r8, r2, 8 }
+ { bzt r8, .Lcopy_unaligned_src_loop; addi r1, r1, 4 }
+
+ { bz r2, .Lcopy_unaligned_done }
+#endif /* !CHIP_HAS_DWORD_ALIGN() */
+
+ /* Fall through */
+
+/*
+ *
+ * 1 byte at a time copy handler.
+ *
+ */
+
+.Lcopy_unaligned_few:
+EX: { lb_u r3, r1; addi r1, r1, 1 }
+EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, .Lcopy_unaligned_few }
+
+.Lcopy_unaligned_done:
+
+ /* For memcpy return original dest address, else zero. */
+ { mz r0, r29, r23; jrp lr }
+
+.Lend_memcpy_common:
+ .size memcpy_common, .Lend_memcpy_common - memcpy_common
+
+ .section .fixup,"ax"
+memcpy_common_fixup:
+ .type memcpy_common_fixup, @function
+
+ /* Skip any bytes we already successfully copied.
+ * r2 (num remaining) is correct, but r0 (dst) and r1 (src)
+ * may not be quite right because of unrolling and prefetching.
+ * So we need to recompute their values as the address just
+ * after the last byte we are sure was successfully loaded and
+ * then stored.
+ */
+
+ /* Determine how many bytes we successfully copied. */
+ { sub r3, r25, r2 }
+
+ /* Add this to the original r0 and r1 to get their new values. */
+ { add r0, r23, r3; add r1, r24, r3 }
+
+ { bzt r29, memcpy_fixup_loop }
+ { blzt r29, copy_to_user_fixup_loop }
+
+copy_from_user_fixup_loop:
+ /* Try copying the rest one byte at a time, expecting a load fault. */
+.Lcfu: { lb_u r3, r1; addi r1, r1, 1 }
+ { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, copy_from_user_fixup_loop }
+
+.Lcopy_from_user_fixup_zero_remainder:
+ { bbs r29, 2f } /* low bit set means IS_COPY_FROM_USER */
+ /* byte-at-a-time loop faulted, so zero the rest. */
+ { move r3, r2; bz r2, 2f /* should be impossible, but handle it. */ }
+1: { sb r0, zero; addi r0, r0, 1; addi r3, r3, -1 }
+ { bnzt r3, 1b }
+2: move lr, r27
+ { move r0, r2; jrp lr }
+
+copy_to_user_fixup_loop:
+ /* Try copying the rest one byte at a time, expecting a store fault. */
+ { lb_u r3, r1; addi r1, r1, 1 }
+.Lctu: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, copy_to_user_fixup_loop }
+.Lcopy_to_user_fixup_done:
+ move lr, r27
+ { move r0, r2; jrp lr }
+
+memcpy_fixup_loop:
+ /* Try copying the rest one byte at a time. We expect a disastrous
+ * fault to happen since we are in fixup code, but let it happen.
+ */
+ { lb_u r3, r1; addi r1, r1, 1 }
+ { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, memcpy_fixup_loop }
+ /* This should be unreachable, we should have faulted again.
+ * But be paranoid and handle it in case some interrupt changed
+ * the TLB or something.
+ */
+ move lr, r27
+ { move r0, r23; jrp lr }
+
+ .size memcpy_common_fixup, . - memcpy_common_fixup
+
+ .section __ex_table,"a"
+ .word .Lcfu, .Lcopy_from_user_fixup_zero_remainder
+ .word .Lctu, .Lcopy_to_user_fixup_done
diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c
new file mode 100644
index 0000000..dfedea7
--- /dev/null
+++ b/arch/tile/lib/memcpy_tile64.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/fixmap.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+
+/* Defined in memcpy.S */
+extern unsigned long __memcpy_asm(void *to, const void *from, unsigned long n);
+extern unsigned long __copy_to_user_inatomic_asm(
+ void __user *to, const void *from, unsigned long n);
+extern unsigned long __copy_from_user_inatomic_asm(
+ void *to, const void __user *from, unsigned long n);
+extern unsigned long __copy_from_user_zeroing_asm(
+ void *to, const void __user *from, unsigned long n);
+
+typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long);
+
+/* Size above which to consider TLB games for performance */
+#define LARGE_COPY_CUTOFF 2048
+
+/* Communicate to the simulator what we are trying to do. */
+#define sim_allow_multiple_caching(b) \
+ __insn_mtspr(SPR_SIM_CONTROL, \
+ SIM_CONTROL_ALLOW_MULTIPLE_CACHING | ((b) << _SIM_CONTROL_OPERATOR_BITS))
+
+/*
+ * Copy memory by briefly enabling incoherent cacheline-at-a-time mode.
+ *
+ * We set up our own source and destination PTEs that we fully control.
+ * This is the only way to guarantee that we don't race with another
+ * thread that is modifying the PTE; we can't afford to try the
+ * copy_{to,from}_user() technique of catching the interrupt, since
+ * we must run with interrupts disabled to avoid the risk of some
+ * other code seeing the incoherent data in our cache. (Recall that
+ * our cache is indexed by PA, so even if the other code doesn't use
+ * our KM_MEMCPY virtual addresses, they'll still hit in cache using
+ * the normal VAs that aren't supposed to hit in cache.)
+ */
+static void memcpy_multicache(void *dest, const void *source,
+ pte_t dst_pte, pte_t src_pte, int len)
+{
+ int idx;
+ unsigned long flags, newsrc, newdst;
+ pmd_t *pmdp;
+ pte_t *ptep;
+ int cpu = get_cpu();
+
+ /*
+ * Disable interrupts so that we don't recurse into memcpy()
+ * in an interrupt handler, nor accidentally reference
+ * the PA of the source from an interrupt routine. Also
+ * notify the simulator that we're playing games so we don't
+ * generate spurious coherency warnings.
+ */
+ local_irq_save(flags);
+ sim_allow_multiple_caching(1);
+
+ /* Set up the new dest mapping */
+ idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0;
+ newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
+ pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
+ ptep = pte_offset_kernel(pmdp, newdst);
+ if (pte_val(*ptep) != pte_val(dst_pte)) {
+ set_pte(ptep, dst_pte);
+ local_flush_tlb_page(NULL, newdst, PAGE_SIZE);
+ }
+
+ /* Set up the new source mapping */
+ idx += (KM_MEMCPY0 - KM_MEMCPY1);
+ src_pte = hv_pte_set_nc(src_pte);
+ src_pte = hv_pte_clear_writable(src_pte); /* be paranoid */
+ newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
+ pmdp = pmd_offset(pud_offset(pgd_offset_k(newsrc), newsrc), newsrc);
+ ptep = pte_offset_kernel(pmdp, newsrc);
+ *ptep = src_pte; /* set_pte() would be confused by this */
+ local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
+
+ /* Actually move the data. */
+ __memcpy_asm((void *)newdst, (const void *)newsrc, len);
+
+ /*
+ * Remap the source as locally-cached and not OLOC'ed so that
+ * we can inval without also invaling the remote cpu's cache.
+ * This also avoids known errata with inv'ing cacheable oloc data.
+ */
+ src_pte = hv_pte_set_mode(src_pte, HV_PTE_MODE_CACHE_NO_L3);
+ src_pte = hv_pte_set_writable(src_pte); /* need write access for inv */
+ *ptep = src_pte; /* set_pte() would be confused by this */
+ local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
+
+ /*
+ * Do the actual invalidation, covering the full L2 cache line
+ * at the end since __memcpy_asm() is somewhat aggressive.
+ */
+ __inv_buffer((void *)newsrc, len);
+
+ /*
+ * We're done: notify the simulator that all is back to normal,
+ * and re-enable interrupts and pre-emption.
+ */
+ sim_allow_multiple_caching(0);
+ local_irq_restore(flags);
+ put_cpu();
+}
+
+/*
+ * Identify large copies from remotely-cached memory, and copy them
+ * via memcpy_multicache() if they look good, otherwise fall back
+ * to the particular kind of copying passed as the memcpy_t function.
+ */
+static unsigned long fast_copy(void *dest, const void *source, int len,
+ memcpy_t func)
+{
+ /*
+ * Check if it's big enough to bother with. We may end up doing a
+ * small copy via TLB manipulation if we're near a page boundary,
+ * but presumably we'll make it up when we hit the second page.
+ */
+ while (len >= LARGE_COPY_CUTOFF) {
+ int copy_size, bytes_left_on_page;
+ pte_t *src_ptep, *dst_ptep;
+ pte_t src_pte, dst_pte;
+ struct page *src_page, *dst_page;
+
+ /* Is the source page oloc'ed to a remote cpu? */
+retry_source:
+ src_ptep = virt_to_pte(current->mm, (unsigned long)source);
+ if (src_ptep == NULL)
+ break;
+ src_pte = *src_ptep;
+ if (!hv_pte_get_present(src_pte) ||
+ !hv_pte_get_readable(src_pte) ||
+ hv_pte_get_mode(src_pte) != HV_PTE_MODE_CACHE_TILE_L3)
+ break;
+ if (get_remote_cache_cpu(src_pte) == smp_processor_id())
+ break;
+ src_page = pfn_to_page(hv_pte_get_pfn(src_pte));
+ get_page(src_page);
+ if (pte_val(src_pte) != pte_val(*src_ptep)) {
+ put_page(src_page);
+ goto retry_source;
+ }
+ if (pte_huge(src_pte)) {
+ /* Adjust the PTE to correspond to a small page */
+ int pfn = hv_pte_get_pfn(src_pte);
+ pfn += (((unsigned long)source & (HPAGE_SIZE-1))
+ >> PAGE_SHIFT);
+ src_pte = pfn_pte(pfn, src_pte);
+ src_pte = pte_mksmall(src_pte);
+ }
+
+ /* Is the destination page writable? */
+retry_dest:
+ dst_ptep = virt_to_pte(current->mm, (unsigned long)dest);
+ if (dst_ptep == NULL) {
+ put_page(src_page);
+ break;
+ }
+ dst_pte = *dst_ptep;
+ if (!hv_pte_get_present(dst_pte) ||
+ !hv_pte_get_writable(dst_pte)) {
+ put_page(src_page);
+ break;
+ }
+ dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte));
+ if (dst_page == src_page) {
+ /*
+ * Source and dest are on the same page; this
+ * potentially exposes us to incoherence if any
+ * part of src and dest overlap on a cache line.
+ * Just give up rather than trying to be precise.
+ */
+ put_page(src_page);
+ break;
+ }
+ get_page(dst_page);
+ if (pte_val(dst_pte) != pte_val(*dst_ptep)) {
+ put_page(dst_page);
+ goto retry_dest;
+ }
+ if (pte_huge(dst_pte)) {
+ /* Adjust the PTE to correspond to a small page */
+ int pfn = hv_pte_get_pfn(dst_pte);
+ pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
+ >> PAGE_SHIFT);
+ dst_pte = pfn_pte(pfn, dst_pte);
+ dst_pte = pte_mksmall(dst_pte);
+ }
+
+ /* All looks good: create a cachable PTE and copy from it */
+ copy_size = len;
+ bytes_left_on_page =
+ PAGE_SIZE - (((int)source) & (PAGE_SIZE-1));
+ if (copy_size > bytes_left_on_page)
+ copy_size = bytes_left_on_page;
+ bytes_left_on_page =
+ PAGE_SIZE - (((int)dest) & (PAGE_SIZE-1));
+ if (copy_size > bytes_left_on_page)
+ copy_size = bytes_left_on_page;
+ memcpy_multicache(dest, source, dst_pte, src_pte, copy_size);
+
+ /* Release the pages */
+ put_page(dst_page);
+ put_page(src_page);
+
+ /* Continue on the next page */
+ dest += copy_size;
+ source += copy_size;
+ len -= copy_size;
+ }
+
+ return func(dest, source, len);
+}
+
+void *memcpy(void *to, const void *from, __kernel_size_t n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return (void *)__memcpy_asm(to, from, n);
+ else
+ return (void *)fast_copy(to, from, n, __memcpy_asm);
+}
+
+unsigned long __copy_to_user_inatomic(void __user *to, const void *from,
+ unsigned long n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return __copy_to_user_inatomic_asm(to, from, n);
+ else
+ return fast_copy(to, from, n, __copy_to_user_inatomic_asm);
+}
+
+unsigned long __copy_from_user_inatomic(void *to, const void __user *from,
+ unsigned long n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return __copy_from_user_inatomic_asm(to, from, n);
+ else
+ return fast_copy(to, from, n, __copy_from_user_inatomic_asm);
+}
+
+unsigned long __copy_from_user_zeroing(void *to, const void __user *from,
+ unsigned long n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return __copy_from_user_zeroing_asm(to, from, n);
+ else
+ return fast_copy(to, from, n, __copy_from_user_zeroing_asm);
+}
+
+#endif /* !CHIP_HAS_COHERENT_LOCAL_CACHE() */
diff --git a/arch/tile/lib/memmove_32.c b/arch/tile/lib/memmove_32.c
new file mode 100644
index 0000000..fd615ae
--- /dev/null
+++ b/arch/tile/lib/memmove_32.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+ if ((const char *)src >= (char *)dest + n
+ || (char *)dest >= (const char *)src + n) {
+ /* We found no overlap, so let memcpy do all the heavy
+ * lifting (prefetching, etc.)
+ */
+ return memcpy(dest, src, n);
+ }
+
+ if (n != 0) {
+ const uint8_t *in;
+ uint8_t x;
+ uint8_t *out;
+ int stride;
+
+ if (src < dest) {
+ /* copy backwards */
+ in = (const uint8_t *)src + n - 1;
+ out = (uint8_t *)dest + n - 1;
+ stride = -1;
+ } else {
+ /* copy forwards */
+ in = (const uint8_t *)src;
+ out = (uint8_t *)dest;
+ stride = 1;
+ }
+
+ /* Manually software-pipeline this loop. */
+ x = *in;
+ in += stride;
+
+ while (--n != 0) {
+ *out = x;
+ out += stride;
+ x = *in;
+ in += stride;
+ }
+
+ *out = x;
+ }
+
+ return dest;
+}
+EXPORT_SYMBOL(memmove);
diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c
new file mode 100644
index 0000000..bfde5d8
--- /dev/null
+++ b/arch/tile/lib/memset_32.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <arch/chip.h>
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+
+void *memset(void *s, int c, size_t n)
+{
+ uint32_t *out32;
+ int n32;
+ uint32_t v16, v32;
+ uint8_t *out8 = s;
+#if !CHIP_HAS_WH64()
+ int ahead32;
+#else
+ int to_align32;
+#endif
+
+ /* Experimentation shows that a trivial tight loop is a win up until
+ * around a size of 20, where writing a word at a time starts to win.
+ */
+#define BYTE_CUTOFF 20
+
+#if BYTE_CUTOFF < 3
+ /* This must be at least at least this big, or some code later
+ * on doesn't work.
+ */
+#error "BYTE_CUTOFF is too small"
+#endif
+
+ if (n < BYTE_CUTOFF) {
+ /* Strangely, this turns out to be the tightest way to
+ * write this loop.
+ */
+ if (n != 0) {
+ do {
+ /* Strangely, combining these into one line
+ * performs worse.
+ */
+ *out8 = c;
+ out8++;
+ } while (--n != 0);
+ }
+
+ return s;
+ }
+
+#if !CHIP_HAS_WH64()
+ /* Use a spare issue slot to start prefetching the first cache
+ * line early. This instruction is free as the store can be buried
+ * in otherwise idle issue slots doing ALU ops.
+ */
+ __insn_prefetch(out8);
+
+ /* We prefetch the end so that a short memset that spans two cache
+ * lines gets some prefetching benefit. Again we believe this is free
+ * to issue.
+ */
+ __insn_prefetch(&out8[n - 1]);
+#endif /* !CHIP_HAS_WH64() */
+
+
+ /* Align 'out8'. We know n >= 3 so this won't write past the end. */
+ while (((uintptr_t) out8 & 3) != 0) {
+ *out8++ = c;
+ --n;
+ }
+
+ /* Align 'n'. */
+ while (n & 3)
+ out8[--n] = c;
+
+ out32 = (uint32_t *) out8;
+ n32 = n >> 2;
+
+ /* Tile input byte out to 32 bits. */
+ v16 = __insn_intlb(c, c);
+ v32 = __insn_intlh(v16, v16);
+
+ /* This must be at least 8 or the following loop doesn't work. */
+#define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4)
+
+#if !CHIP_HAS_WH64()
+
+ ahead32 = CACHE_LINE_SIZE_IN_WORDS;
+
+ /* We already prefetched the first and last cache lines, so
+ * we only need to do more prefetching if we are storing
+ * to more than two cache lines.
+ */
+ if (n32 > CACHE_LINE_SIZE_IN_WORDS * 2) {
+ int i;
+
+ /* Prefetch the next several cache lines.
+ * This is the setup code for the software-pipelined
+ * loop below.
+ */
+#define MAX_PREFETCH 5
+ ahead32 = n32 & -CACHE_LINE_SIZE_IN_WORDS;
+ if (ahead32 > MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS)
+ ahead32 = MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS;
+
+ for (i = CACHE_LINE_SIZE_IN_WORDS;
+ i < ahead32; i += CACHE_LINE_SIZE_IN_WORDS)
+ __insn_prefetch(&out32[i]);
+ }
+
+ if (n32 > ahead32) {
+ while (1) {
+ int j;
+
+ /* Prefetch by reading one word several cache lines
+ * ahead. Since loads are non-blocking this will
+ * cause the full cache line to be read while we are
+ * finishing earlier cache lines. Using a store
+ * here causes microarchitectural performance
+ * problems where a victimizing store miss goes to
+ * the head of the retry FIFO and locks the pipe for
+ * a few cycles. So a few subsequent stores in this
+ * loop go into the retry FIFO, and then later
+ * stores see other stores to the same cache line
+ * are already in the retry FIFO and themselves go
+ * into the retry FIFO, filling it up and grinding
+ * to a halt waiting for the original miss to be
+ * satisfied.
+ */
+ __insn_prefetch(&out32[ahead32]);
+
+#if 1
+#if CACHE_LINE_SIZE_IN_WORDS % 4 != 0
+#error "Unhandled CACHE_LINE_SIZE_IN_WORDS"
+#endif
+
+ n32 -= CACHE_LINE_SIZE_IN_WORDS;
+
+ /* Save icache space by only partially unrolling
+ * this loop.
+ */
+ for (j = CACHE_LINE_SIZE_IN_WORDS / 4; j > 0; j--) {
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ }
+#else
+ /* Unfortunately, due to a code generator flaw this
+ * allocates a separate register for each of these
+ * stores, which requires a large number of spills,
+ * which makes this procedure enormously bigger
+ * (something like 70%)
+ */
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ n32 -= 16;
+#endif
+
+ /* To save compiled code size, reuse this loop even
+ * when we run out of prefetching to do by dropping
+ * ahead32 down.
+ */
+ if (n32 <= ahead32) {
+ /* Not even a full cache line left,
+ * so stop now.
+ */
+ if (n32 < CACHE_LINE_SIZE_IN_WORDS)
+ break;
+
+ /* Choose a small enough value that we don't
+ * prefetch past the end. There's no sense
+ * in touching cache lines we don't have to.
+ */
+ ahead32 = CACHE_LINE_SIZE_IN_WORDS - 1;
+ }
+ }
+ }
+
+#else /* CHIP_HAS_WH64() */
+
+ /* Determine how many words we need to emit before the 'out32'
+ * pointer becomes aligned modulo the cache line size.
+ */
+ to_align32 =
+ (-((uintptr_t)out32 >> 2)) & (CACHE_LINE_SIZE_IN_WORDS - 1);
+
+ /* Only bother aligning and using wh64 if there is at least
+ * one full cache line to process. This check also prevents
+ * overrunning the end of the buffer with alignment words.
+ */
+ if (to_align32 <= n32 - CACHE_LINE_SIZE_IN_WORDS) {
+ int lines_left;
+
+ /* Align out32 mod the cache line size so we can use wh64. */
+ n32 -= to_align32;
+ for (; to_align32 != 0; to_align32--) {
+ *out32 = v32;
+ out32++;
+ }
+
+ /* Use unsigned divide to turn this into a right shift. */
+ lines_left = (unsigned)n32 / CACHE_LINE_SIZE_IN_WORDS;
+
+ do {
+ /* Only wh64 a few lines at a time, so we don't
+ * exceed the maximum number of victim lines.
+ */
+ int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS())
+ ? lines_left
+ : CHIP_MAX_OUTSTANDING_VICTIMS());
+ uint32_t *wh = out32;
+ int i = x;
+ int j;
+
+ lines_left -= x;
+
+ do {
+ __insn_wh64(wh);
+ wh += CACHE_LINE_SIZE_IN_WORDS;
+ } while (--i);
+
+ for (j = x * (CACHE_LINE_SIZE_IN_WORDS / 4);
+ j != 0; j--) {
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ }
+ } while (lines_left != 0);
+
+ /* We processed all full lines above, so only this many
+ * words remain to be processed.
+ */
+ n32 &= CACHE_LINE_SIZE_IN_WORDS - 1;
+ }
+
+#endif /* CHIP_HAS_WH64() */
+
+ /* Now handle any leftover values. */
+ if (n32 != 0) {
+ do {
+ *out32 = v32;
+ out32++;
+ } while (--n32 != 0);
+ }
+
+ return s;
+}
+EXPORT_SYMBOL(memset);
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
new file mode 100644
index 0000000..485e24d
--- /dev/null
+++ b/arch/tile/lib/spinlock_32.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/processor.h>
+
+#include "spinlock_common.h"
+
+void arch_spin_lock(arch_spinlock_t *lock)
+{
+ int my_ticket;
+ int iterations = 0;
+ int delta;
+
+ while ((my_ticket = __insn_tns((void *)&lock->next_ticket)) & 1)
+ delay_backoff(iterations++);
+
+ /* Increment the next ticket number, implicitly releasing tns lock. */
+ lock->next_ticket = my_ticket + TICKET_QUANTUM;
+
+ /* Wait until it's our turn. */
+ while ((delta = my_ticket - lock->current_ticket) != 0)
+ relax((128 / CYCLES_PER_RELAX_LOOP) * delta);
+}
+EXPORT_SYMBOL(arch_spin_lock);
+
+int arch_spin_trylock(arch_spinlock_t *lock)
+{
+ /*
+ * Grab a ticket; no need to retry if it's busy, we'll just
+ * treat that the same as "locked", since someone else
+ * will lock it momentarily anyway.
+ */
+ int my_ticket = __insn_tns((void *)&lock->next_ticket);
+
+ if (my_ticket == lock->current_ticket) {
+ /* Not currently locked, so lock it by keeping this ticket. */
+ lock->next_ticket = my_ticket + TICKET_QUANTUM;
+ /* Success! */
+ return 1;
+ }
+
+ if (!(my_ticket & 1)) {
+ /* Release next_ticket. */
+ lock->next_ticket = my_ticket;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(arch_spin_trylock);
+
+void arch_spin_unlock_wait(arch_spinlock_t *lock)
+{
+ u32 iterations = 0;
+ while (arch_spin_is_locked(lock))
+ delay_backoff(iterations++);
+}
+EXPORT_SYMBOL(arch_spin_unlock_wait);
+
+/*
+ * The low byte is always reserved to be the marker for a "tns" operation
+ * since the low bit is set to "1" by a tns. The next seven bits are
+ * zeroes. The next byte holds the "next" writer value, i.e. the ticket
+ * available for the next task that wants to write. The third byte holds
+ * the current writer value, i.e. the writer who holds the current ticket.
+ * If current == next == 0, there are no interested writers.
+ */
+#define WR_NEXT_SHIFT _WR_NEXT_SHIFT
+#define WR_CURR_SHIFT _WR_CURR_SHIFT
+#define WR_WIDTH _WR_WIDTH
+#define WR_MASK ((1 << WR_WIDTH) - 1)
+
+/*
+ * The last eight bits hold the active reader count. This has to be
+ * zero before a writer can start to write.
+ */
+#define RD_COUNT_SHIFT _RD_COUNT_SHIFT
+#define RD_COUNT_WIDTH _RD_COUNT_WIDTH
+#define RD_COUNT_MASK ((1 << RD_COUNT_WIDTH) - 1)
+
+
+/* Lock the word, spinning until there are no tns-ers. */
+static inline u32 get_rwlock(arch_rwlock_t *rwlock)
+{
+ u32 iterations = 0;
+ for (;;) {
+ u32 val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val & 1)) {
+ delay_backoff(iterations++);
+ continue;
+ }
+ return val;
+ }
+}
+
+int arch_read_trylock_slow(arch_rwlock_t *rwlock)
+{
+ u32 val = get_rwlock(rwlock);
+ int locked = (val << RD_COUNT_WIDTH) == 0;
+ rwlock->lock = val + (locked << RD_COUNT_SHIFT);
+ return locked;
+}
+EXPORT_SYMBOL(arch_read_trylock_slow);
+
+void arch_read_unlock_slow(arch_rwlock_t *rwlock)
+{
+ u32 val = get_rwlock(rwlock);
+ rwlock->lock = val - (1 << RD_COUNT_SHIFT);
+}
+EXPORT_SYMBOL(arch_read_unlock_slow);
+
+void arch_write_unlock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+ u32 eq, mask = 1 << WR_CURR_SHIFT;
+ while (unlikely(val & 1)) {
+ /* Limited backoff since we are the highest-priority task. */
+ relax(4);
+ val = __insn_tns((int *)&rwlock->lock);
+ }
+ val = __insn_addb(val, mask);
+ eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT));
+ val = __insn_mz(eq & mask, val);
+ rwlock->lock = val;
+}
+EXPORT_SYMBOL(arch_write_unlock_slow);
+
+/*
+ * We spin until everything but the reader bits (which are in the high
+ * part of the word) are zero, i.e. no active or waiting writers, no tns.
+ *
+ * ISSUE: This approach can permanently starve readers. A reader who sees
+ * a writer could instead take a ticket lock (just like a writer would),
+ * and atomically enter read mode (with 1 reader) when it gets the ticket.
+ * This way both readers and writers will always make forward progress
+ * in a finite time.
+ */
+void arch_read_lock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+ u32 iterations = 0;
+ do {
+ if (!(val & 1))
+ rwlock->lock = val;
+ delay_backoff(iterations++);
+ val = __insn_tns((int *)&rwlock->lock);
+ } while ((val << RD_COUNT_WIDTH) != 0);
+ rwlock->lock = val + (1 << RD_COUNT_SHIFT);
+}
+EXPORT_SYMBOL(arch_read_lock_slow);
+
+void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+ /*
+ * The trailing underscore on this variable (and curr_ below)
+ * reminds us that the high bits are garbage; we mask them out
+ * when we compare them.
+ */
+ u32 my_ticket_;
+
+ /* Take out the next ticket; this will also stop would-be readers. */
+ if (val & 1)
+ val = get_rwlock(rwlock);
+ rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+
+ /* Extract my ticket value from the original word. */
+ my_ticket_ = val >> WR_NEXT_SHIFT;
+
+ /*
+ * Wait until the "current" field matches our ticket, and
+ * there are no remaining readers.
+ */
+ for (;;) {
+ u32 curr_ = val >> WR_CURR_SHIFT;
+ u32 readers = val >> RD_COUNT_SHIFT;
+ u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+ if (likely(delta == 0))
+ break;
+
+ /* Delay based on how many lock-holders are still out there. */
+ relax((256 / CYCLES_PER_RELAX_LOOP) * delta);
+
+ /*
+ * Get a non-tns value to check; we don't need to tns
+ * it ourselves. Since we're not tns'ing, we retry
+ * more rapidly to get a valid value.
+ */
+ while ((val = rwlock->lock) & 1)
+ relax(4);
+ }
+}
+EXPORT_SYMBOL(arch_write_lock_slow);
+
+int __tns_atomic_acquire(atomic_t *lock)
+{
+ int ret;
+ u32 iterations = 0;
+
+ BUG_ON(__insn_mfspr(SPR_INTERRUPT_CRITICAL_SECTION));
+ __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1);
+
+ while ((ret = __insn_tns((void *)&lock->counter)) == 1)
+ delay_backoff(iterations++);
+ return ret;
+}
+
+void __tns_atomic_release(atomic_t *p, int v)
+{
+ p->counter = v;
+ __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0);
+}
diff --git a/arch/tile/lib/spinlock_common.h b/arch/tile/lib/spinlock_common.h
new file mode 100644
index 0000000..c101098
--- /dev/null
+++ b/arch/tile/lib/spinlock_common.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ * This file is included into spinlock_32.c or _64.c.
+ */
+
+/*
+ * The mfspr in __spinlock_relax() is 5 or 6 cycles plus 2 for loop
+ * overhead.
+ */
+#ifdef __tilegx__
+#define CYCLES_PER_RELAX_LOOP 7
+#else
+#define CYCLES_PER_RELAX_LOOP 8
+#endif
+
+/*
+ * Idle the core for CYCLES_PER_RELAX_LOOP * iterations cycles.
+ */
+static inline void
+relax(int iterations)
+{
+ for (/*above*/; iterations > 0; iterations--)
+ __insn_mfspr(SPR_PASS);
+ barrier();
+}
+
+/* Perform bounded exponential backoff.*/
+static void delay_backoff(int iterations)
+{
+ u32 exponent, loops;
+
+ /*
+ * 2^exponent is how many times we go around the loop,
+ * which takes 8 cycles. We want to start with a 16- to 31-cycle
+ * loop, so we need to go around minimum 2 = 2^1 times, so we
+ * bias the original value up by 1.
+ */
+ exponent = iterations + 1;
+
+ /*
+ * Don't allow exponent to exceed 7, so we have 128 loops,
+ * or 1,024 (to 2,047) cycles, as our maximum.
+ */
+ if (exponent > 8)
+ exponent = 8;
+
+ loops = 1 << exponent;
+
+ /* Add a randomness factor so two cpus never get in lock step. */
+ loops += __insn_crc32_32(stack_pointer, get_cycles_low()) &
+ (loops - 1);
+
+ relax(1 << exponent);
+}
diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c
new file mode 100644
index 0000000..c94e6f7
--- /dev/null
+++ b/arch/tile/lib/strchr_32.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+#undef strchr
+
+char *strchr(const char *s, int c)
+{
+ int z, g;
+
+ /* Get an aligned pointer. */
+ const uintptr_t s_int = (uintptr_t) s;
+ const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+ /* Create four copies of the byte for which we are looking. */
+ const uint32_t goal = 0x01010101 * (uint8_t) c;
+
+ /* Read the first aligned word, but force bytes before the string to
+ * match neither zero nor goal (we make sure the high bit of each
+ * byte is 1, and the low 7 bits are all the opposite of the goal
+ * byte).
+ *
+ * Note that this shift count expression works because we know shift
+ * counts are taken mod 32.
+ */
+ const uint32_t before_mask = (1 << (s_int << 3)) - 1;
+ uint32_t v = (*p | before_mask) ^ (goal & __insn_shrib(before_mask, 1));
+
+ uint32_t zero_matches, goal_matches;
+ while (1) {
+ /* Look for a terminating '\0'. */
+ zero_matches = __insn_seqb(v, 0);
+
+ /* Look for the goal byte. */
+ goal_matches = __insn_seqb(v, goal);
+
+ if (__builtin_expect(zero_matches | goal_matches, 0))
+ break;
+
+ v = *++p;
+ }
+
+ z = __insn_ctz(zero_matches);
+ g = __insn_ctz(goal_matches);
+
+ /* If we found c before '\0' we got a match. Note that if c == '\0'
+ * then g == z, and we correctly return the address of the '\0'
+ * rather than NULL.
+ */
+ return (g <= z) ? ((char *)p) + (g >> 3) : NULL;
+}
+EXPORT_SYMBOL(strchr);
diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c
new file mode 100644
index 0000000..f26f88e
--- /dev/null
+++ b/arch/tile/lib/strlen_32.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+size_t strlen(const char *s)
+{
+ /* Get an aligned pointer. */
+ const uintptr_t s_int = (uintptr_t) s;
+ const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+ /* Read the first word, but force bytes before the string to be nonzero.
+ * This expression works because we know shift counts are taken mod 32.
+ */
+ uint32_t v = *p | ((1 << (s_int << 3)) - 1);
+
+ uint32_t bits;
+ while ((bits = __insn_seqb(v, 0)) == 0)
+ v = *++p;
+
+ return ((const char *)p) + (__insn_ctz(bits) >> 3) - s;
+}
+EXPORT_SYMBOL(strlen);
diff --git a/arch/tile/lib/uaccess.c b/arch/tile/lib/uaccess.c
new file mode 100644
index 0000000..f8d398c
--- /dev/null
+++ b/arch/tile/lib/uaccess.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/module.h>
+
+int __range_ok(unsigned long addr, unsigned long size)
+{
+ unsigned long limit = current_thread_info()->addr_limit.seg;
+ return !((addr < limit && size <= limit - addr) ||
+ is_arch_mappable_range(addr, size));
+}
+EXPORT_SYMBOL(__range_ok);
+
+#ifdef CONFIG_DEBUG_COPY_FROM_USER
+void copy_from_user_overflow(void)
+{
+ WARN(1, "Buffer overflow detected!\n");
+}
+EXPORT_SYMBOL(copy_from_user_overflow);
+#endif
diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S
new file mode 100644
index 0000000..979f76d
--- /dev/null
+++ b/arch/tile/lib/usercopy_32.S
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <arch/chip.h>
+
+/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
+
+ .pushsection .fixup,"ax"
+
+get_user_fault:
+ { move r0, zero; move r1, zero }
+ { movei r2, -EFAULT; jrp lr }
+ ENDPROC(get_user_fault)
+
+put_user_fault:
+ { movei r0, -EFAULT; jrp lr }
+ ENDPROC(put_user_fault)
+
+ .popsection
+
+/*
+ * __get_user_N functions take a pointer in r0, and return 0 in r2
+ * on success, with the value in r0; or else -EFAULT in r2.
+ */
+#define __get_user_N(bytes, LOAD) \
+ STD_ENTRY(__get_user_##bytes); \
+1: { LOAD r0, r0; move r1, zero; move r2, zero }; \
+ jrp lr; \
+ STD_ENDPROC(__get_user_##bytes); \
+ .pushsection __ex_table,"a"; \
+ .word 1b, get_user_fault; \
+ .popsection
+
+__get_user_N(1, lb_u)
+__get_user_N(2, lh_u)
+__get_user_N(4, lw)
+
+/*
+ * __get_user_8 takes a pointer in r0, and returns 0 in r2
+ * on success, with the value in r0/r1; or else -EFAULT in r2.
+ */
+ STD_ENTRY(__get_user_8);
+1: { lw r0, r0; addi r1, r0, 4 };
+2: { lw r1, r1; move r2, zero };
+ jrp lr;
+ STD_ENDPROC(__get_user_8);
+ .pushsection __ex_table,"a";
+ .word 1b, get_user_fault;
+ .word 2b, get_user_fault;
+ .popsection
+
+/*
+ * __put_user_N functions take a value in r0 and a pointer in r1,
+ * and return 0 in r0 on success or -EFAULT on failure.
+ */
+#define __put_user_N(bytes, STORE) \
+ STD_ENTRY(__put_user_##bytes); \
+1: { STORE r1, r0; move r0, zero }; \
+ jrp lr; \
+ STD_ENDPROC(__put_user_##bytes); \
+ .pushsection __ex_table,"a"; \
+ .word 1b, put_user_fault; \
+ .popsection
+
+__put_user_N(1, sb)
+__put_user_N(2, sh)
+__put_user_N(4, sw)
+
+/*
+ * __put_user_8 takes a value in r0/r1 and a pointer in r2,
+ * and returns 0 in r0 on success or -EFAULT on failure.
+ */
+STD_ENTRY(__put_user_8)
+1: { sw r2, r0; addi r2, r2, 4 }
+2: { sw r2, r1; move r0, zero }
+ jrp lr
+ STD_ENDPROC(__put_user_8)
+ .pushsection __ex_table,"a"
+ .word 1b, put_user_fault
+ .word 2b, put_user_fault
+ .popsection
+
+
+/*
+ * strnlen_user_asm takes the pointer in r0, and the length bound in r1.
+ * It returns the length, including the terminating NUL, or zero on exception.
+ * If length is greater than the bound, returns one plus the bound.
+ */
+STD_ENTRY(strnlen_user_asm)
+ { bz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */
+1: { lb_u r4, r0; addi r1, r1, -1 }
+ bz r4, 2f
+ { bnzt r1, 1b; addi r0, r0, 1 }
+2: { sub r0, r0, r3; jrp lr }
+ STD_ENDPROC(strnlen_user_asm)
+ .pushsection .fixup,"ax"
+strnlen_user_fault:
+ { move r0, zero; jrp lr }
+ ENDPROC(strnlen_user_fault)
+ .section __ex_table,"a"
+ .word 1b, strnlen_user_fault
+ .popsection
+
+/*
+ * strncpy_from_user_asm takes the kernel target pointer in r0,
+ * the userspace source pointer in r1, and the length bound (including
+ * the trailing NUL) in r2. On success, it returns the string length
+ * (not including the trailing NUL), or -EFAULT on failure.
+ */
+STD_ENTRY(strncpy_from_user_asm)
+ { bz r2, 2f; move r3, r0 }
+1: { lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
+ { sb r0, r4; addi r0, r0, 1 }
+ bz r2, 2f
+ bnzt r4, 1b
+ addi r0, r0, -1 /* don't count the trailing NUL */
+2: { sub r0, r0, r3; jrp lr }
+ STD_ENDPROC(strncpy_from_user_asm)
+ .pushsection .fixup,"ax"
+strncpy_from_user_fault:
+ { movei r0, -EFAULT; jrp lr }
+ ENDPROC(strncpy_from_user_fault)
+ .section __ex_table,"a"
+ .word 1b, strncpy_from_user_fault
+ .popsection
+
+/*
+ * clear_user_asm takes the user target address in r0 and the
+ * number of bytes to zero in r1.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ * Note that we don't use a separate .fixup section here since we fall
+ * through into the "fixup" code as the last straight-line bundle anyway.
+ */
+STD_ENTRY(clear_user_asm)
+ { bz r1, 2f; or r2, r0, r1 }
+ andi r2, r2, 3
+ bzt r2, .Lclear_aligned_user_asm
+1: { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 }
+ bnzt r1, 1b
+2: { move r0, r1; jrp lr }
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+.Lclear_aligned_user_asm:
+1: { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 }
+ bnzt r1, 1b
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(clear_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+/*
+ * flush_user_asm takes the user target address in r0 and the
+ * number of bytes to flush in r1.
+ * It returns the number of unflushable bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(flush_user_asm)
+ bz r1, 2f
+ { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+ { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+ { and r0, r0, r2; and r1, r1, r2 }
+ { sub r1, r1, r0 }
+1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() }
+ { addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b }
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(flush_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+/*
+ * inv_user_asm takes the user target address in r0 and the
+ * number of bytes to invalidate in r1.
+ * It returns the number of not inv'able bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(inv_user_asm)
+ bz r1, 2f
+ { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+ { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+ { and r0, r0, r2; and r1, r1, r2 }
+ { sub r1, r1, r0 }
+1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
+ { addi r0, r0, CHIP_INV_STRIDE(); bnzt r1, 1b }
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(inv_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+/*
+ * finv_user_asm takes the user target address in r0 and the
+ * number of bytes to flush-invalidate in r1.
+ * It returns the number of not finv'able bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(finv_user_asm)
+ bz r1, 2f
+ { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+ { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+ { and r0, r0, r2; and r1, r1, r2 }
+ { sub r1, r1, r0 }
+1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() }
+ { addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b }
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(finv_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
OpenPOWER on IntegriCloud