diff options
Diffstat (limited to 'arch/tile/kernel/pci_gx.c')
| -rw-r--r-- | arch/tile/kernel/pci_gx.c | 727 |
1 files changed, 414 insertions, 313 deletions
diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c index 6640e7b..a97a645 100644 --- a/arch/tile/kernel/pci_gx.c +++ b/arch/tile/kernel/pci_gx.c @@ -69,19 +69,32 @@ static int pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; * a HW PCIe link-training bug. The exact delay is specified with * a kernel boot argument in the form of "pcie_rc_delay=T,P,S", * where T is the TRIO instance number, P is the port number and S is - * the delay in seconds. If the delay is not provided, the value - * will be DEFAULT_RC_DELAY. + * the delay in seconds. If the argument is specified, but the delay is + * not provided, the value will be DEFAULT_RC_DELAY. */ static int rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; /* Default number of seconds that the PCIe RC port probe can be delayed. */ #define DEFAULT_RC_DELAY 10 -/* Max number of seconds that the PCIe RC port probe can be delayed. */ -#define MAX_RC_DELAY 20 +/* The PCI I/O space size in each PCI domain. */ +#define IO_SPACE_SIZE 0x10000 + +/* Provide shorter versions of some very long constant names. */ +#define AUTO_CONFIG_RC \ + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC +#define AUTO_CONFIG_RC_G1 \ + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1 +#define AUTO_CONFIG_EP \ + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT +#define AUTO_CONFIG_EP_G1 \ + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1 /* Array of the PCIe ports configuration info obtained from the BIB. */ -struct pcie_port_property pcie_ports[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; +struct pcie_trio_ports_property pcie_ports[TILEGX_NUM_TRIO]; + +/* Number of configured TRIO instances. */ +int num_trio_shims; /* All drivers share the TRIO contexts defined here. */ gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; @@ -89,24 +102,21 @@ gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; /* Pointer to an array of PCIe RC controllers. */ struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; int num_rc_controllers; -static int num_ep_controllers; static struct pci_ops tile_cfg_ops; /* Mask of CPUs that should receive PCIe interrupts. */ static struct cpumask intr_cpus_map; -/* - * We don't need to worry about the alignment of resources. - */ +/* We don't need to worry about the alignment of resources. */ resource_size_t pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) + resource_size_t size, + resource_size_t align) { return res->start; } EXPORT_SYMBOL(pcibios_align_resource); - /* * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #. * For now, we simply send interrupts to non-dataplane CPUs. @@ -134,24 +144,19 @@ static int tile_irq_cpu(int irq) return cpu; } -/* - * Open a file descriptor to the TRIO shim. - */ +/* Open a file descriptor to the TRIO shim. */ static int tile_pcie_open(int trio_index) { gxio_trio_context_t *context = &trio_contexts[trio_index]; int ret; + int mac; - /* - * This opens a file descriptor to the TRIO shim. - */ + /* This opens a file descriptor to the TRIO shim. */ ret = gxio_trio_init(context, trio_index); if (ret < 0) - return ret; + goto gxio_trio_init_failure; - /* - * Allocate an ASID for the kernel. - */ + /* Allocate an ASID for the kernel. */ ret = gxio_trio_alloc_asids(context, 1, 0, 0); if (ret < 0) { pr_err("PCI: ASID alloc failure on TRIO %d, give up\n", @@ -189,31 +194,97 @@ static int tile_pcie_open(int trio_index) } #endif + /* Get the properties of the PCIe ports on this TRIO instance. */ + ret = gxio_trio_get_port_property(context, &pcie_ports[trio_index]); + if (ret < 0) { + pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d," + " on TRIO %d\n", ret, trio_index); + goto get_port_property_failure; + } + + context->mmio_base_mac = + iorpc_ioremap(context->fd, 0, HV_TRIO_CONFIG_IOREMAP_SIZE); + if (context->mmio_base_mac == NULL) { + pr_err("PCI: TRIO config space mapping failure, error %d," + " on TRIO %d\n", ret, trio_index); + ret = -ENOMEM; + + goto trio_mmio_mapping_failure; + } + + /* Check the port strap state which will override the BIB setting. */ + for (mac = 0; mac < TILEGX_TRIO_PCIES; mac++) { + TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; + unsigned int reg_offset; + + /* Ignore ports that are not specified in the BIB. */ + if (!pcie_ports[trio_index].ports[mac].allow_rc && + !pcie_ports[trio_index].ports[mac].allow_ep) + continue; + + reg_offset = + (TRIO_PCIE_INTFC_PORT_CONFIG << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_config.word = + __gxio_mmio_read(context->mmio_base_mac + reg_offset); + + if (port_config.strap_state != AUTO_CONFIG_RC && + port_config.strap_state != AUTO_CONFIG_RC_G1) { + /* + * If this is really intended to be an EP port, record + * it so that the endpoint driver will know about it. + */ + if (port_config.strap_state == AUTO_CONFIG_EP || + port_config.strap_state == AUTO_CONFIG_EP_G1) + pcie_ports[trio_index].ports[mac].allow_ep = 1; + } + } + return ret; +trio_mmio_mapping_failure: +get_port_property_failure: asid_alloc_failure: #ifdef USE_SHARED_PCIE_CONFIG_REGION pio_alloc_failure: #endif hv_dev_close(context->fd); +gxio_trio_init_failure: + context->fd = -1; return ret; } -static void -tilegx_legacy_irq_ack(struct irq_data *d) +static int __init tile_trio_init(void) +{ + int i; + + /* We loop over all the TRIO shims. */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + if (tile_pcie_open(i) < 0) + continue; + num_trio_shims++; + } + + return 0; +} +postcore_initcall(tile_trio_init); + +static void tilegx_legacy_irq_ack(struct irq_data *d) { __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); } -static void -tilegx_legacy_irq_mask(struct irq_data *d) +static void tilegx_legacy_irq_mask(struct irq_data *d) { __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); } -static void -tilegx_legacy_irq_unmask(struct irq_data *d) +static void tilegx_legacy_irq_unmask(struct irq_data *d) { __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); } @@ -234,8 +305,7 @@ static struct irq_chip tilegx_legacy_irq_chip = { * to Linux which just calls handle_level_irq() after clearing the * MAC INTx Assert status bit associated with this interrupt. */ -static void -trio_handle_level_irq(unsigned int irq, struct irq_desc *desc) +static void trio_handle_level_irq(unsigned int irq, struct irq_desc *desc) { struct pci_controller *controller = irq_desc_get_handler_data(desc); gxio_trio_context_t *trio_context = controller->trio; @@ -301,9 +371,7 @@ static int tile_init_irqs(struct pci_controller *controller) goto free_irqs; } - /* - * Register the IRQ handler with the kernel. - */ + /* Register the IRQ handler with the kernel. */ irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip, trio_handle_level_irq); irq_set_chip_data(irq, (void *)(uint64_t)i); @@ -320,14 +388,39 @@ free_irqs: } /* + * Return 1 if the port is strapped to operate in RC mode. + */ +static int +strapped_for_rc(gxio_trio_context_t *trio_context, int mac) +{ + TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; + unsigned int reg_offset; + + /* Check the port configuration. */ + reg_offset = + (TRIO_PCIE_INTFC_PORT_CONFIG << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + port_config.word = + __gxio_mmio_read(trio_context->mmio_base_mac + reg_offset); + + if (port_config.strap_state == AUTO_CONFIG_RC || + port_config.strap_state == AUTO_CONFIG_RC_G1) + return 1; + else + return 0; +} + +/* * Find valid controllers and fill in pci_controller structs for each * of them. * - * Returns the number of controllers discovered. + * Return the number of controllers discovered. */ int __init tile_pci_init(void) { - int num_trio_shims = 0; int ctl_index = 0; int i, j; @@ -338,64 +431,62 @@ int __init tile_pci_init(void) pr_info("PCI: Searching for controllers...\n"); - /* - * We loop over all the TRIO shims. - */ - for (i = 0; i < TILEGX_NUM_TRIO; i++) { - int ret; - - ret = tile_pcie_open(i); - if (ret < 0) - continue; - - num_trio_shims++; - } - if (num_trio_shims == 0 || sim_is_simulator()) return 0; /* - * Now determine which PCIe ports are configured to operate in RC mode. - * We look at the Board Information Block first and then see if there - * are any overriding configuration by the HW strapping pin. + * Now determine which PCIe ports are configured to operate in RC + * mode. There is a differece in the port configuration capability + * between the Gx36 and Gx72 devices. + * + * The Gx36 has configuration capability for each of the 3 PCIe + * interfaces (disable, auto endpoint, auto RC, etc.). + * On the Gx72, you can only select one of the 3 PCIe interfaces per + * TRIO to train automatically. Further, the allowable training modes + * are reduced to four options (auto endpoint, auto RC, stream x1, + * stream x4). + * + * For Gx36 ports, it must be allowed to be in RC mode by the + * Board Information Block, and the hardware strapping pins must be + * set to RC mode. + * + * For Gx72 ports, the port will operate in RC mode if either of the + * following is true: + * 1. It is allowed to be in RC mode by the Board Information Block, + * and the BIB doesn't allow the EP mode. + * 2. It is allowed to be in either the RC or the EP mode by the BIB, + * and the hardware strapping pin is set to RC mode. */ for (i = 0; i < TILEGX_NUM_TRIO; i++) { gxio_trio_context_t *context = &trio_contexts[i]; - int ret; if (context->fd < 0) continue; - ret = hv_dev_pread(context->fd, 0, - (HV_VirtAddr)&pcie_ports[i][0], - sizeof(struct pcie_port_property) * TILEGX_TRIO_PCIES, - GXIO_TRIO_OP_GET_PORT_PROPERTY); - if (ret < 0) { - pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d," - " on TRIO %d\n", ret, i); - continue; - } - for (j = 0; j < TILEGX_TRIO_PCIES; j++) { - if (pcie_ports[i][j].allow_rc) { + int is_rc = 0; + + if (pcie_ports[i].is_gx72 && + pcie_ports[i].ports[j].allow_rc) { + if (!pcie_ports[i].ports[j].allow_ep || + strapped_for_rc(context, j)) + is_rc = 1; + } else if (pcie_ports[i].ports[j].allow_rc && + strapped_for_rc(context, j)) { + is_rc = 1; + } + if (is_rc) { pcie_rc[i][j] = 1; num_rc_controllers++; } - else if (pcie_ports[i][j].allow_ep) { - num_ep_controllers++; - } } } - /* - * Return if no PCIe ports are configured to operate in RC mode. - */ + /* Return if no PCIe ports are configured to operate in RC mode. */ if (num_rc_controllers == 0) return 0; - /* - * Set the TRIO pointer and MAC index for each PCIe RC port. - */ + /* Set the TRIO pointer and MAC index for each PCIe RC port. */ for (i = 0; i < TILEGX_NUM_TRIO; i++) { for (j = 0; j < TILEGX_TRIO_PCIES; j++) { if (pcie_rc[i][j]) { @@ -411,26 +502,32 @@ int __init tile_pci_init(void) } out: - /* - * Configure each PCIe RC port. - */ + /* Configure each PCIe RC port. */ for (i = 0; i < num_rc_controllers; i++) { - /* - * Configure the PCIe MAC to run in RC mode. - */ + /* Configure the PCIe MAC to run in RC mode. */ struct pci_controller *controller = &pci_controllers[i]; controller->index = i; controller->ops = &tile_cfg_ops; + controller->io_space.start = PCIBIOS_MIN_IO + + (i * IO_SPACE_SIZE); + controller->io_space.end = controller->io_space.start + + IO_SPACE_SIZE - 1; + BUG_ON(controller->io_space.end > IO_SPACE_LIMIT); + controller->io_space.flags = IORESOURCE_IO; + snprintf(controller->io_space_name, + sizeof(controller->io_space_name), + "PCI I/O domain %d", i); + controller->io_space.name = controller->io_space_name; + /* * The PCI memory resource is located above the PA space. * For every host bridge, the BAR window or the MMIO aperture * is in range [3GB, 4GB - 1] of a 4GB space beyond the * PA space. */ - controller->mem_offset = TILE_PCI_MEM_START + (i * TILE_PCI_BAR_WINDOW_TOP); controller->mem_space.start = controller->mem_offset + @@ -458,7 +555,6 @@ static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin) return controller->irq_intx_table[pin - 1]; } - static void fixup_read_and_payload_sizes(struct pci_controller *controller) { gxio_trio_context_t *trio_context = controller->trio; @@ -472,9 +568,7 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller) mac = controller->mac; - /* - * Set our max read request size to be 4KB. - */ + /* Set our max read request size to be 4KB. */ reg_offset = (TRIO_PCIE_RC_DEVICE_CONTROL << TRIO_CFG_REGION_ADDR__REG_SHIFT) | @@ -483,10 +577,10 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller) (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + - reg_offset); + reg_offset); dev_control.max_read_req_sz = 5; __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, - dev_control.word); + dev_control.word); /* * Set the max payload size supported by this Gx PCIe MAC. @@ -502,10 +596,10 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller) (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac + - reg_offset); + reg_offset); rc_dev_cap.mps_sup = 1; __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, - rc_dev_cap.word); + rc_dev_cap.word); /* Configure PCI Express MPS setting. */ list_for_each_entry(child, &root_bus->children, node) @@ -528,7 +622,7 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller) dev_control.max_payload_size, dev_control.max_read_req_sz, mac); - if (err < 0) { + if (err < 0) { pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, " "MAC %d on TRIO %d\n", mac, controller->trio_index); @@ -565,21 +659,14 @@ static int setup_pcie_rc_delay(char *str) if (!isdigit(*str)) return -EINVAL; delay = simple_strtoul(str, (char **)&str, 10); - if (delay > MAX_RC_DELAY) - return -EINVAL; } rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY; - pr_info("Delaying PCIe RC link training for %u sec" - " on MAC %lu on TRIO %lu\n", rc_delay[trio_index][mac], - mac, trio_index); return 0; } early_param("pcie_rc_delay", setup_pcie_rc_delay); -/* - * PCI initialization entry point, called by subsys_initcall. - */ +/* PCI initialization entry point, called by subsys_initcall. */ int __init pcibios_init(void) { resource_size_t offset; @@ -589,35 +676,10 @@ int __init pcibios_init(void) tile_pci_init(); - if (num_rc_controllers == 0 && num_ep_controllers == 0) + if (num_rc_controllers == 0) return 0; /* - * We loop over all the TRIO shims and set up the MMIO mappings. - */ - for (i = 0; i < TILEGX_NUM_TRIO; i++) { - gxio_trio_context_t *context = &trio_contexts[i]; - - if (context->fd < 0) - continue; - - /* - * Map in the MMIO space for the MAC. - */ - offset = 0; - context->mmio_base_mac = - iorpc_ioremap(context->fd, offset, - HV_TRIO_CONFIG_IOREMAP_SIZE); - if (context->mmio_base_mac == NULL) { - pr_err("PCI: MAC map failure on TRIO %d\n", i); - - hv_dev_close(context->fd); - context->fd = -1; - continue; - } - } - - /* * Delay a bit in case devices aren't ready. Some devices are * known to require at least 20ms here, but we use a more * conservative value. @@ -628,7 +690,6 @@ int __init pcibios_init(void) for (next_busno = 0, i = 0; i < num_rc_controllers; i++) { struct pci_controller *controller = &pci_controllers[i]; gxio_trio_context_t *trio_context = controller->trio; - TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; TRIO_PCIE_INTFC_PORT_STATUS_t port_status; TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl; struct pci_bus *bus; @@ -645,75 +706,64 @@ int __init pcibios_init(void) mac = controller->mac; /* - * Check the port strap state which will override the BIB - * setting. + * Check for PCIe link-up status to decide if we need + * to force the link to come up. */ - reg_offset = - (TRIO_PCIE_INTFC_PORT_CONFIG << + (TRIO_PCIE_INTFC_PORT_STATUS << TRIO_CFG_REGION_ADDR__REG_SHIFT) | (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + TRIO_CFG_REGION_ADDR__INTFC_SHIFT) | (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); - port_config.word = + port_status.word = __gxio_mmio_read(trio_context->mmio_base_mac + reg_offset); - - if ((port_config.strap_state != - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC) && - (port_config.strap_state != - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1)) { - /* - * If this is really intended to be an EP port, - * record it so that the endpoint driver will know about it. - */ - if (port_config.strap_state == - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT || - port_config.strap_state == - TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1) - pcie_ports[trio_index][mac].allow_ep = 1; - - continue; + if (!port_status.dl_up) { + if (rc_delay[trio_index][mac]) { + pr_info("Delaying PCIe RC TRIO init %d sec" + " on MAC %d on TRIO %d\n", + rc_delay[trio_index][mac], mac, + trio_index); + msleep(rc_delay[trio_index][mac] * 1000); + } + ret = gxio_trio_force_rc_link_up(trio_context, mac); + if (ret < 0) + pr_err("PCI: PCIE_FORCE_LINK_UP failure, " + "MAC %d on TRIO %d\n", mac, trio_index); } - /* - * Delay the RC link training if needed. - */ - if (rc_delay[trio_index][mac]) - msleep(rc_delay[trio_index][mac] * 1000); - - ret = gxio_trio_force_rc_link_up(trio_context, mac); - if (ret < 0) - pr_err("PCI: PCIE_FORCE_LINK_UP failure, " - "MAC %d on TRIO %d\n", mac, trio_index); - pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", i, trio_index, controller->mac); - /* - * Wait a bit here because some EP devices take longer - * to come up. - */ - msleep(1000); - - /* - * Check for PCIe link-up status. - */ - - reg_offset = - (TRIO_PCIE_INTFC_PORT_STATUS << - TRIO_CFG_REGION_ADDR__REG_SHIFT) | - (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << - TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | - (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + /* Delay the bus probe if needed. */ + if (rc_delay[trio_index][mac]) { + pr_info("Delaying PCIe RC bus enumerating %d sec" + " on MAC %d on TRIO %d\n", + rc_delay[trio_index][mac], mac, + trio_index); + msleep(rc_delay[trio_index][mac] * 1000); + } else { + /* + * Wait a bit here because some EP devices + * take longer to come up. + */ + msleep(1000); + } + /* Check for PCIe link-up status again. */ port_status.word = __gxio_mmio_read(trio_context->mmio_base_mac + reg_offset); if (!port_status.dl_up) { - pr_err("PCI: link is down, MAC %d on TRIO %d\n", - mac, trio_index); + if (pcie_ports[trio_index].ports[mac].removable) { + pr_info("PCI: link is down, MAC %d on TRIO %d\n", + mac, trio_index); + pr_info("This is expected if no PCIe card" + " is connected to this link\n"); + } else + pr_err("PCI: link is down, MAC %d on TRIO %d\n", + mac, trio_index); continue; } @@ -739,7 +789,6 @@ int __init pcibios_init(void) * Change the device ID so that Linux bus crawl doesn't confuse * the internal bridge with any Tilera endpoints. */ - reg_offset = (TRIO_PCIE_RC_DEVICE_ID_VEN_ID << TRIO_CFG_REGION_ADDR__REG_SHIFT) | @@ -752,10 +801,7 @@ int __init pcibios_init(void) TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) | TILERA_VENDOR_ID); - /* - * Set the internal P2P bridge class code. - */ - + /* Set the internal P2P bridge class code. */ reg_offset = (TRIO_PCIE_RC_REVISION_ID << TRIO_CFG_REGION_ADDR__REG_SHIFT) | @@ -766,26 +812,22 @@ int __init pcibios_init(void) class_code_revision = __gxio_mmio_read32(trio_context->mmio_base_mac + reg_offset); - class_code_revision = (class_code_revision & 0xff ) | - (PCI_CLASS_BRIDGE_PCI << 16); + class_code_revision = (class_code_revision & 0xff) | + (PCI_CLASS_BRIDGE_PCI << 16); __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, class_code_revision); #ifdef USE_SHARED_PCIE_CONFIG_REGION - /* - * Map in the MMIO space for the PIO region. - */ + /* Map in the MMIO space for the PIO region. */ offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) | (((unsigned long long)mac) << TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); #else - /* - * Alloc a PIO region for PCI config access per MAC. - */ + /* Alloc a PIO region for PCI config access per MAC. */ ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); if (ret < 0) { pr_err("PCI: PCI CFG PIO alloc failure for mac %d " @@ -796,9 +838,7 @@ int __init pcibios_init(void) trio_context->pio_cfg_index[mac] = ret; - /* - * For PIO CFG, the bus_address_hi parameter is 0. - */ + /* For PIO CFG, the bus_address_hi parameter is 0. */ ret = gxio_trio_init_pio_region_aux(trio_context, trio_context->pio_cfg_index[mac], mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); @@ -815,9 +855,15 @@ int __init pcibios_init(void) #endif + /* + * To save VMALLOC space, we take advantage of the fact that + * bit 29 in the PIO CFG address format is reserved 0. With + * TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT being 30, + * this cuts VMALLOC space usage from 1GB to 512MB per mac. + */ trio_context->mmio_base_pio_cfg[mac] = - iorpc_ioremap(trio_context->fd, offset, - (1 << TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT)); + iorpc_ioremap(trio_context->fd, offset, (1UL << + (TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT - 1))); if (trio_context->mmio_base_pio_cfg[mac] == NULL) { pr_err("PCI: PIO map failure for mac %d on TRIO %d\n", mac, trio_index); @@ -825,9 +871,7 @@ int __init pcibios_init(void) continue; } - /* - * Initialize the PCIe interrupts. - */ + /* Initialize the PCIe interrupts. */ if (tile_init_irqs(controller)) { pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n", mac, trio_index); @@ -838,17 +882,16 @@ int __init pcibios_init(void) /* * The PCI memory resource is located above the PA space. * The memory range for the PCI root bus should not overlap - * with the physical RAM + * with the physical RAM. */ pci_add_resource_offset(&resources, &controller->mem_space, controller->mem_offset); - + pci_add_resource(&resources, &controller->io_space); controller->first_busno = next_busno; bus = pci_scan_root_bus(NULL, next_busno, controller->ops, controller, &resources); controller->root_bus = bus; next_busno = bus->busn_res.end + 1; - } /* Do machine dependent PCI interrupt routing */ @@ -860,7 +903,6 @@ int __init pcibios_init(void) * It allocates all of the resources (I/O memory, etc) * associated with the devices read in above. */ - pci_assign_unassigned_resources(); /* Record the I/O resources in the PCI controller structure. */ @@ -868,9 +910,6 @@ int __init pcibios_init(void) struct pci_controller *controller = &pci_controllers[i]; gxio_trio_context_t *trio_context = controller->trio; struct pci_bus *root_bus = pci_controllers[i].root_bus; - struct pci_bus *next_bus; - uint32_t bus_address_hi; - struct pci_dev *dev; int ret; int j; @@ -884,43 +923,12 @@ int __init pcibios_init(void) /* Configure the max_payload_size values for this domain. */ fixup_read_and_payload_sizes(controller); - list_for_each_entry(dev, &root_bus->devices, bus_list) { - /* Find the PCI host controller, ie. the 1st bridge. */ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && - (PCI_SLOT(dev->devfn) == 0)) { - next_bus = dev->subordinate; - pci_controllers[i].mem_resources[0] = - *next_bus->resource[0]; - pci_controllers[i].mem_resources[1] = - *next_bus->resource[1]; - pci_controllers[i].mem_resources[2] = - *next_bus->resource[2]; - - break; - } - } - - if (pci_controllers[i].mem_resources[1].flags & IORESOURCE_MEM) - bus_address_hi = - pci_controllers[i].mem_resources[1].start >> 32; - else if (pci_controllers[i].mem_resources[2].flags & IORESOURCE_PREFETCH) - bus_address_hi = - pci_controllers[i].mem_resources[2].start >> 32; - else { - /* This is unlikely. */ - pr_err("PCI: no memory resources on TRIO %d mac %d\n", - controller->trio_index, controller->mac); - continue; - } - - /* - * Alloc a PIO region for PCI memory access for each RC port. - */ + /* Alloc a PIO region for PCI memory access for each RC port. */ ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); if (ret < 0) { pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, " - "give up\n", controller->trio_index, - controller->mac); + "give up\n", controller->trio_index, + controller->mac); continue; } @@ -938,12 +946,45 @@ int __init pcibios_init(void) 0); if (ret < 0) { pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, " - "give up\n", controller->trio_index, - controller->mac); + "give up\n", controller->trio_index, + controller->mac); continue; } +#ifdef CONFIG_TILE_PCI_IO + /* + * Alloc a PIO region for PCI I/O space access for each RC port. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: I/O PIO alloc failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + continue; + } + + controller->pio_io_index = ret; + + /* + * For PIO IO, the bus_address_hi parameter is hard-coded 0 + * because PCI I/O address space is 32-bit. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + controller->pio_io_index, + controller->mac, + 0, + HV_TRIO_PIO_FLAG_IO_SPACE); + if (ret < 0) { + pr_err("PCI: I/O PIO init failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + continue; + } +#endif + /* * Configure a Mem-Map region for each memory controller so * that Linux can map all of its PA space to the PCI bus. @@ -958,9 +999,9 @@ int __init pcibios_init(void) 0); if (ret < 0) { pr_err("PCI: Mem-Map alloc failure on TRIO %d " - "mac %d for MC %d, give up\n", - controller->trio_index, - controller->mac, j); + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); goto alloc_mem_map_failed; } @@ -991,9 +1032,9 @@ int __init pcibios_init(void) GXIO_TRIO_ORDER_MODE_UNORDERED); if (ret < 0) { pr_err("PCI: Mem-Map init failure on TRIO %d " - "mac %d for MC %d, give up\n", - controller->trio_index, - controller->mac, j); + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); goto alloc_mem_map_failed; } @@ -1002,23 +1043,19 @@ int __init pcibios_init(void) alloc_mem_map_failed: break; } - } return 0; } subsys_initcall(pcibios_init); -/* Note: to be deleted after Linux 3.6 merge. */ +/* No bus fixups needed. */ void pcibios_fixup_bus(struct pci_bus *bus) { } -/* - * This can be called from the generic PCI layer, but doesn't need to - * do anything. - */ -char *pcibios_setup(char *str) +/* Process any "pci=" kernel boot arguments. */ +char *__init pcibios_setup(char *str) { if (!strcmp(str, "off")) { pci_probe = 0; @@ -1029,8 +1066,7 @@ char *pcibios_setup(char *str) /* * Enable memory address decoding, as appropriate, for the - * device described by the 'dev' struct. The I/O decoding - * is disabled, though the TILE-Gx supports I/O addressing. + * device described by the 'dev' struct. * * This is called from the generic PCI layer, and can be called * for bridges or endpoints. @@ -1040,13 +1076,24 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pci_enable_resources(dev, mask); } -/* Called for each device after PCI setup is done. */ +/* + * Called for each device after PCI setup is done. + * We initialize the PCI device capabilities conservatively, assuming that + * all devices can only address the 32-bit DMA space. The exception here is + * that the device dma_offset is set to the value that matches the 64-bit + * capable devices. This is OK because dma_offset is not used by legacy + * dma_ops, nor by the hybrid dma_ops's streaming DMAs, which are 64-bit ops. + * This implementation matches the kernel design of setting PCI devices' + * coherent_dma_mask to 0xffffffffull by default, allowing the device drivers + * to skip calling pci_set_consistent_dma_mask(DMA_BIT_MASK(32)). + */ static void pcibios_fixup_final(struct pci_dev *pdev) { - set_dma_ops(&pdev->dev, gx_pci_dma_map_ops); + set_dma_ops(&pdev->dev, gx_legacy_pci_dma_map_ops); set_dma_offset(&pdev->dev, TILE_PCI_MEM_MAP_BASE_OFFSET); pdev->dev.archdata.max_direct_dma_addr = TILE_PCI_MAX_DIRECT_DMA_ADDRESS; + pdev->dev.coherent_dma_mask = TILE_PCI_MAX_DIRECT_DMA_ADDRESS; } DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final); @@ -1060,19 +1107,15 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) resource_size_t start; resource_size_t end; int trio_fd; - int i, j; + int i; start = phys_addr; end = phys_addr + size - 1; /* - * In the following, each PCI controller's mem_resources[1] - * represents its (non-prefetchable) PCI memory resource and - * mem_resources[2] refers to its prefetchable PCI memory resource. - * By searching phys_addr in each controller's mem_resources[], we can + * By searching phys_addr in each controller's mem_space, we can * determine the controller that should accept the PCI memory access. */ - for (i = 0; i < num_rc_controllers; i++) { /* * Skip controllers that are not properly initialized or @@ -1081,25 +1124,18 @@ void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) if (pci_controllers[i].root_bus == NULL) continue; - for (j = 1; j < 3; j++) { - bar_start = - pci_controllers[i].mem_resources[j].start; - bar_end = - pci_controllers[i].mem_resources[j].end; - - if ((start >= bar_start) && (end <= bar_end)) { + bar_start = pci_controllers[i].mem_space.start; + bar_end = pci_controllers[i].mem_space.end; - controller = &pci_controllers[i]; - - goto got_it; - } + if ((start >= bar_start) && (end <= bar_end)) { + controller = &pci_controllers[i]; + break; } } if (controller == NULL) return NULL; -got_it: trio_fd = controller->trio->fd; /* Convert the resource start to the bus address offset. */ @@ -1107,14 +1143,71 @@ got_it: offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + start; - /* - * We need to keep the PCI bus address's in-page offset in the VA. - */ + /* We need to keep the PCI bus address's in-page offset in the VA. */ return iorpc_ioremap(trio_fd, offset, size) + - (phys_addr & (PAGE_SIZE - 1)); + (start & (PAGE_SIZE - 1)); } EXPORT_SYMBOL(ioremap); +#ifdef CONFIG_TILE_PCI_IO +/* Map a PCI I/O address into VA space. */ +void __iomem *ioport_map(unsigned long port, unsigned int size) +{ + struct pci_controller *controller = NULL; + resource_size_t bar_start; + resource_size_t bar_end; + resource_size_t offset; + resource_size_t start; + resource_size_t end; + int trio_fd; + int i; + + start = port; + end = port + size - 1; + + /* + * By searching the port in each controller's io_space, we can + * determine the controller that should accept the PCI I/O access. + */ + for (i = 0; i < num_rc_controllers; i++) { + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (pci_controllers[i].root_bus == NULL) + continue; + + bar_start = pci_controllers[i].io_space.start; + bar_end = pci_controllers[i].io_space.end; + + if ((start >= bar_start) && (end <= bar_end)) { + controller = &pci_controllers[i]; + break; + } + } + + if (controller == NULL) + return NULL; + + trio_fd = controller->trio->fd; + + /* Convert the resource start to the bus address offset. */ + port -= controller->io_space.start; + + offset = HV_TRIO_PIO_OFFSET(controller->pio_io_index) + port; + + /* We need to keep the PCI bus address's in-page offset in the VA. */ + return iorpc_ioremap(trio_fd, offset, size) + (port & (PAGE_SIZE - 1)); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(ioport_unmap); +#endif + void pci_iounmap(struct pci_dev *dev, void __iomem *addr) { iounmap(addr); @@ -1136,7 +1229,6 @@ EXPORT_SYMBOL(pci_iounmap); * offset is in bytes, from the start of config space for the * specified bus & device. */ - static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset, int size, u32 *val) { @@ -1186,7 +1278,6 @@ static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset, * Accesses to the directly attached device have to be * sent as type-0 configs. */ - if (busnum == (controller->first_busno + 1)) { /* * There is only one device off of our built-in P2P bridge. @@ -1208,9 +1299,8 @@ static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset, * Note that we don't set the mac field in cfg_addr because the * mapping is per port. */ - mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + - cfg_addr.word; + cfg_addr.word; valid_device: @@ -1314,7 +1404,6 @@ static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset, * Accesses to the directly attached device have to be * sent as type-0 configs. */ - if (busnum == (controller->first_busno + 1)) { /* * There is only one device off of our built-in P2P bridge. @@ -1336,7 +1425,6 @@ static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset, * Note that we don't set the mac field in cfg_addr because the * mapping is per port. */ - mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + cfg_addr.word; @@ -1374,11 +1462,8 @@ static struct pci_ops tile_cfg_ops = { }; -/* - * MSI support starts here. - */ -static unsigned int -tilegx_msi_startup(struct irq_data *d) +/* MSI support starts here. */ +static unsigned int tilegx_msi_startup(struct irq_data *d) { if (d->msi_desc) unmask_msi_irq(d); @@ -1386,21 +1471,18 @@ tilegx_msi_startup(struct irq_data *d) return 0; } -static void -tilegx_msi_ack(struct irq_data *d) +static void tilegx_msi_ack(struct irq_data *d) { __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); } -static void -tilegx_msi_mask(struct irq_data *d) +static void tilegx_msi_mask(struct irq_data *d) { mask_msi_irq(d); __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); } -static void -tilegx_msi_unmask(struct irq_data *d) +static void tilegx_msi_unmask(struct irq_data *d) { __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); unmask_msi_irq(d); @@ -1457,32 +1539,55 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) trio_context = controller->trio; /* - * Allocate the Mem-Map that will accept the MSI write and - * trigger the TILE-side interrupts. + * Allocate a scatter-queue that will accept the MSI write and + * trigger the TILE-side interrupts. We use the scatter-queue regions + * before the mem map regions, because the latter are needed by more + * applications. */ - mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0); - if (mem_map < 0) { - dev_printk(KERN_INFO, &pdev->dev, - "%s Mem-Map alloc failure. " - "Failed to initialize MSI interrupts. " - "Falling back to legacy interrupts.\n", - desc->msi_attrib.is_msix ? "MSI-X" : "MSI"); + mem_map = gxio_trio_alloc_scatter_queues(trio_context, 1, 0, 0); + if (mem_map >= 0) { + TRIO_MAP_SQ_DOORBELL_FMT_t doorbell_template = {{ + .pop = 0, + .doorbell = 1, + }}; + + mem_map += TRIO_NUM_MAP_MEM_REGIONS; + mem_map_base = MEM_MAP_INTR_REGIONS_BASE + + mem_map * MEM_MAP_INTR_REGION_SIZE; + mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; + + msi_addr = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 8; + msg.data = (unsigned int)doorbell_template.word; + } else { + /* SQ regions are out, allocate from map mem regions. */ + mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0); + if (mem_map < 0) { + dev_printk(KERN_INFO, &pdev->dev, + "%s Mem-Map alloc failure. " + "Failed to initialize MSI interrupts. " + "Falling back to legacy interrupts.\n", + desc->msi_attrib.is_msix ? "MSI-X" : "MSI"); + ret = -ENOMEM; + goto msi_mem_map_alloc_failure; + } - ret = -ENOMEM; - goto msi_mem_map_alloc_failure; + mem_map_base = MEM_MAP_INTR_REGIONS_BASE + + mem_map * MEM_MAP_INTR_REGION_SIZE; + mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; + + msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - + TRIO_MAP_MEM_REG_INT0; + + msg.data = mem_map; } /* We try to distribute different IRQs to different tiles. */ cpu = tile_irq_cpu(irq); /* - * Now call up to the HV to configure the Mem-Map interrupt and + * Now call up to the HV to configure the MSI interrupt and * set up the IPI binding. */ - mem_map_base = MEM_MAP_INTR_REGIONS_BASE + - mem_map * MEM_MAP_INTR_REGION_SIZE; - mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; - ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu), KERNEL_PL, irq, controller->mac, mem_map, mem_map_base, mem_map_limit, @@ -1495,13 +1600,9 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) irq_set_msi_desc(irq, desc); - msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - TRIO_MAP_MEM_REG_INT0; - msg.address_hi = msi_addr >> 32; msg.address_lo = msi_addr & 0xffffffff; - msg.data = mem_map; - write_msi_msg(irq, &msg); irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq); irq_set_handler_data(irq, controller); |
