summaryrefslogtreecommitdiffstats
path: root/arch/tile/kernel/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile/kernel/pci.c')
-rw-r--r--arch/tile/kernel/pci.c592
1 files changed, 0 insertions, 592 deletions
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
deleted file mode 100644
index bbf8157..0000000
--- a/arch/tile/kernel/pci.c
+++ /dev/null
@@ -1,592 +0,0 @@
-/*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-#include <linux/export.h>
-
-#include <asm/processor.h>
-#include <asm/sections.h>
-#include <asm/byteorder.h>
-#include <asm/hv_driver.h>
-#include <hv/drv_pcie_rc_intf.h>
-
-
-/*
- * Initialization flow and process
- * -------------------------------
- *
- * This files contains the routines to search for PCI buses,
- * enumerate the buses, and configure any attached devices.
- *
- * There are two entry points here:
- * 1) tile_pci_init
- * This sets up the pci_controller structs, and opens the
- * FDs to the hypervisor. This is called from setup_arch() early
- * in the boot process.
- * 2) pcibios_init
- * This probes the PCI bus(es) for any attached hardware. It's
- * called by subsys_initcall. All of the real work is done by the
- * generic Linux PCI layer.
- *
- */
-
-static int pci_probe = 1;
-
-/*
- * This flag tells if the platform is TILEmpower that needs
- * special configuration for the PLX switch chip.
- */
-int __ro_after_init tile_plx_gen1;
-
-static struct pci_controller controllers[TILE_NUM_PCIE];
-static int num_controllers;
-static int pci_scan_flags[TILE_NUM_PCIE];
-
-static struct pci_ops tile_cfg_ops;
-
-
-/*
- * Open a FD to the hypervisor PCI device.
- *
- * controller_id is the controller number, config type is 0 or 1 for
- * config0 or config1 operations.
- */
-static int tile_pcie_open(int controller_id, int config_type)
-{
- char filename[32];
- int fd;
-
- sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
-
- fd = hv_dev_open((HV_VirtAddr)filename, 0);
-
- return fd;
-}
-
-
-/*
- * Get the IRQ numbers from the HV and set up the handlers for them.
- */
-static int tile_init_irqs(int controller_id, struct pci_controller *controller)
-{
- char filename[32];
- int fd;
- int ret;
- int x;
- struct pcie_rc_config rc_config;
-
- sprintf(filename, "pcie/%d/ctl", controller_id);
- fd = hv_dev_open((HV_VirtAddr)filename, 0);
- if (fd < 0) {
- pr_err("PCI: hv_dev_open(%s) failed\n", filename);
- return -1;
- }
- ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
- sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
- hv_dev_close(fd);
- if (ret != sizeof(rc_config)) {
- pr_err("PCI: wanted %zd bytes, got %d\n",
- sizeof(rc_config), ret);
- return -1;
- }
- /* Record irq_base so that we can map INTx to IRQ # later. */
- controller->irq_base = rc_config.intr;
-
- for (x = 0; x < 4; x++)
- tile_irq_activate(rc_config.intr + x,
- TILE_IRQ_HW_CLEAR);
-
- if (rc_config.plx_gen1)
- controller->plx_gen1 = 1;
-
- return 0;
-}
-
-/*
- * First initialization entry point, called from setup_arch().
- *
- * Find valid controllers and fill in pci_controller structs for each
- * of them.
- *
- * Returns the number of controllers discovered.
- */
-int __init tile_pci_init(void)
-{
- int i;
-
- if (!pci_probe) {
- pr_info("PCI: disabled by boot argument\n");
- return 0;
- }
-
- pr_info("PCI: Searching for controllers...\n");
-
- /* Re-init number of PCIe controllers to support hot-plug feature. */
- num_controllers = 0;
-
- /* Do any configuration we need before using the PCIe */
-
- for (i = 0; i < TILE_NUM_PCIE; i++) {
- /*
- * To see whether we need a real config op based on
- * the results of pcibios_init(), to support PCIe hot-plug.
- */
- if (pci_scan_flags[i] == 0) {
- int hv_cfg_fd0 = -1;
- int hv_cfg_fd1 = -1;
- int hv_mem_fd = -1;
- char name[32];
- struct pci_controller *controller;
-
- /*
- * Open the fd to the HV. If it fails then this
- * device doesn't exist.
- */
- hv_cfg_fd0 = tile_pcie_open(i, 0);
- if (hv_cfg_fd0 < 0)
- continue;
- hv_cfg_fd1 = tile_pcie_open(i, 1);
- if (hv_cfg_fd1 < 0) {
- pr_err("PCI: Couldn't open config fd to HV for controller %d\n",
- i);
- goto err_cont;
- }
-
- sprintf(name, "pcie/%d/mem", i);
- hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
- if (hv_mem_fd < 0) {
- pr_err("PCI: Could not open mem fd to HV!\n");
- goto err_cont;
- }
-
- pr_info("PCI: Found PCI controller #%d\n", i);
-
- controller = &controllers[i];
-
- controller->index = i;
- controller->hv_cfg_fd[0] = hv_cfg_fd0;
- controller->hv_cfg_fd[1] = hv_cfg_fd1;
- controller->hv_mem_fd = hv_mem_fd;
- controller->last_busno = 0xff;
- controller->ops = &tile_cfg_ops;
-
- num_controllers++;
- continue;
-
-err_cont:
- if (hv_cfg_fd0 >= 0)
- hv_dev_close(hv_cfg_fd0);
- if (hv_cfg_fd1 >= 0)
- hv_dev_close(hv_cfg_fd1);
- if (hv_mem_fd >= 0)
- hv_dev_close(hv_mem_fd);
- continue;
- }
- }
-
- /*
- * Before using the PCIe, see if we need to do any platform-specific
- * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
- */
- for (i = 0; i < num_controllers; i++) {
- struct pci_controller *controller = &controllers[i];
-
- if (controller->plx_gen1)
- tile_plx_gen1 = 1;
- }
-
- return num_controllers;
-}
-
-/*
- * (pin - 1) converts from the PCI standard's [1:4] convention to
- * a normal [0:3] range.
- */
-static int tile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- struct pci_controller *controller =
- (struct pci_controller *)dev->sysdata;
- return (pin - 1) + controller->irq_base;
-}
-
-
-static void fixup_read_and_payload_sizes(void)
-{
- struct pci_dev *dev = NULL;
- int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
- int max_read_size = PCI_EXP_DEVCTL_READRQ_512B;
- u16 new_values;
-
- /* Scan for the smallest maximum payload size. */
- for_each_pci_dev(dev) {
- if (!pci_is_pcie(dev))
- continue;
-
- if (dev->pcie_mpss < smallest_max_payload)
- smallest_max_payload = dev->pcie_mpss;
- }
-
- /* Now, set the max_payload_size for all devices to that value. */
- new_values = max_read_size | (smallest_max_payload << 5);
- for_each_pci_dev(dev)
- pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
- PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ,
- new_values);
-}
-
-
-/*
- * Second PCI initialization entry point, called by subsys_initcall.
- *
- * The controllers have been set up by the time we get here, by a call to
- * tile_pci_init.
- */
-int __init pcibios_init(void)
-{
- struct pci_host_bridge *bridge;
- int i;
-
- pr_info("PCI: Probing PCI hardware\n");
-
- /*
- * Delay a bit in case devices aren't ready. Some devices are
- * known to require at least 20ms here, but we use a more
- * conservative value.
- */
- msleep(250);
-
- /* Scan all of the recorded PCI controllers. */
- for (i = 0; i < TILE_NUM_PCIE; i++) {
- /*
- * Do real pcibios init ops if the controller is initialized
- * by tile_pci_init() successfully and not initialized by
- * pcibios_init() yet to support PCIe hot-plug.
- */
- if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
- struct pci_controller *controller = &controllers[i];
- struct pci_bus *bus;
- LIST_HEAD(resources);
-
- if (tile_init_irqs(i, controller)) {
- pr_err("PCI: Could not initialize IRQs\n");
- continue;
- }
-
- pr_info("PCI: initializing controller #%d\n", i);
-
- pci_add_resource(&resources, &ioport_resource);
- pci_add_resource(&resources, &iomem_resource);
-
- bridge = pci_alloc_host_bridge(0);
- if (!bridge)
- break;
-
- list_splice_init(&resources, &bridge->windows);
- bridge->dev.parent = NULL;
- bridge->sysdata = controller;
- bridge->busnr = 0;
- bridge->ops = controller->ops;
- bridge->swizzle_irq = pci_common_swizzle;
- bridge->map_irq = tile_map_irq;
-
- pci_scan_root_bus_bridge(bridge);
- bus = bridge->bus;
- controller->root_bus = bus;
- controller->last_busno = bus->busn_res.end;
- }
- }
-
- /*
- * This comes from the generic Linux PCI driver.
- *
- * It allocates all of the resources (I/O memory, etc)
- * associated with the devices read in above.
- */
- pci_assign_unassigned_resources();
-
- /* Configure the max_read_size and max_payload_size values. */
- fixup_read_and_payload_sizes();
-
- /* Record the I/O resources in the PCI controller structure. */
- for (i = 0; i < TILE_NUM_PCIE; i++) {
- /*
- * Do real pcibios init ops if the controller is initialized
- * by tile_pci_init() successfully and not initialized by
- * pcibios_init() yet to support PCIe hot-plug.
- */
- if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
- struct pci_bus *root_bus = controllers[i].root_bus;
- struct pci_bus *next_bus;
- struct pci_dev *dev;
-
- pci_bus_add_devices(root_bus);
-
- list_for_each_entry(dev, &root_bus->devices, bus_list) {
- /*
- * Find the PCI host controller, ie. the 1st
- * bridge.
- */
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
- (PCI_SLOT(dev->devfn) == 0)) {
- next_bus = dev->subordinate;
- controllers[i].mem_resources[0] =
- *next_bus->resource[0];
- controllers[i].mem_resources[1] =
- *next_bus->resource[1];
- controllers[i].mem_resources[2] =
- *next_bus->resource[2];
-
- /* Setup flags. */
- pci_scan_flags[i] = 1;
-
- break;
- }
- }
- }
- }
-
- return 0;
-}
-subsys_initcall(pcibios_init);
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- /* No special bus mastering setup handling. */
-}
-
-/* Process any "pci=" kernel boot arguments. */
-char *__init pcibios_setup(char *str)
-{
- if (!strcmp(str, "off")) {
- pci_probe = 0;
- return NULL;
- }
- return str;
-}
-
-/*
- * Enable memory and/or address decoding, as appropriate, for the
- * device described by the 'dev' struct.
- *
- * This is called from the generic PCI layer, and can be called
- * for bridges or endpoints.
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- u8 header_type;
- int i;
- struct resource *r;
-
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
- /*
- * For bridges, we enable both memory and I/O decoding
- * in call cases.
- */
- cmd |= PCI_COMMAND_IO;
- cmd |= PCI_COMMAND_MEMORY;
- } else {
- /*
- * For endpoints, we enable memory and/or I/O decoding
- * only if they have a memory resource of that type.
- */
- for (i = 0; i < 6; i++) {
- r = &dev->resource[i];
- if (r->flags & IORESOURCE_UNSET) {
- pr_err("PCI: Device %s not available because of resource collisions\n",
- pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- }
-
- /*
- * We only write the command if it changed.
- */
- if (cmd != old_cmd)
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- return 0;
-}
-
-/****************************************************************
- *
- * Tile PCI config space read/write routines
- *
- ****************************************************************/
-
-/*
- * These are the normal read and write ops
- * These are expanded with macros from pci_bus_read_config_byte() etc.
- *
- * devfn is the combined PCI slot & function.
- *
- * offset is in bytes, from the start of config space for the
- * specified bus & slot.
- */
-
-static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
- int size, u32 *val)
-{
- struct pci_controller *controller = bus->sysdata;
- int busnum = bus->number & 0xff;
- int slot = (devfn >> 3) & 0x1f;
- int function = devfn & 0x7;
- u32 addr;
- int config_mode = 1;
-
- /*
- * There is no bridge between the Tile and bus 0, so we
- * use config0 to talk to bus 0.
- *
- * If we're talking to a bus other than zero then we
- * must have found a bridge.
- */
- if (busnum == 0) {
- /*
- * We fake an empty slot for (busnum == 0) && (slot > 0),
- * since there is only one slot on bus 0.
- */
- if (slot) {
- *val = 0xFFFFFFFF;
- return 0;
- }
- config_mode = 0;
- }
-
- addr = busnum << 20; /* Bus in 27:20 */
- addr |= slot << 15; /* Slot (device) in 19:15 */
- addr |= function << 12; /* Function is in 14:12 */
- addr |= (offset & 0xFFF); /* byte address in 0:11 */
-
- return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
- (HV_VirtAddr)(val), size, addr);
-}
-
-
-/*
- * See tile_cfg_read() for relevant comments.
- * Note that "val" is the value to write, not a pointer to that value.
- */
-static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
- int size, u32 val)
-{
- struct pci_controller *controller = bus->sysdata;
- int busnum = bus->number & 0xff;
- int slot = (devfn >> 3) & 0x1f;
- int function = devfn & 0x7;
- u32 addr;
- int config_mode = 1;
- HV_VirtAddr valp = (HV_VirtAddr)&val;
-
- /*
- * For bus 0 slot 0 we use config 0 accesses.
- */
- if (busnum == 0) {
- /*
- * We fake an empty slot for (busnum == 0) && (slot > 0),
- * since there is only one slot on bus 0.
- */
- if (slot)
- return 0;
- config_mode = 0;
- }
-
- addr = busnum << 20; /* Bus in 27:20 */
- addr |= slot << 15; /* Slot (device) in 19:15 */
- addr |= function << 12; /* Function is in 14:12 */
- addr |= (offset & 0xFFF); /* byte address in 0:11 */
-
-#ifdef __BIG_ENDIAN
- /* Point to the correct part of the 32-bit "val". */
- valp += 4 - size;
-#endif
-
- return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
- valp, size, addr);
-}
-
-
-static struct pci_ops tile_cfg_ops = {
- .read = tile_cfg_read,
- .write = tile_cfg_write,
-};
-
-
-/*
- * In the following, each PCI controller's mem_resources[1]
- * represents its (non-prefetchable) PCI memory resource.
- * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
- * prefetchable PCI memory resources, respectively.
- * For more details, see pci_setup_bridge() in setup-bus.c.
- * By comparing the target PCI memory address against the
- * end address of controller 0, we can determine the controller
- * that should accept the PCI memory access.
- */
-#define TILE_READ(size, type) \
-type _tile_read##size(unsigned long addr) \
-{ \
- type val; \
- int idx = 0; \
- if (addr > controllers[0].mem_resources[1].end && \
- addr > controllers[0].mem_resources[2].end) \
- idx = 1; \
- if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \
- (HV_VirtAddr)(&val), sizeof(type), addr)) \
- pr_err("PCI: read %zd bytes at 0x%lX failed\n", \
- sizeof(type), addr); \
- return val; \
-} \
-EXPORT_SYMBOL(_tile_read##size)
-
-TILE_READ(b, u8);
-TILE_READ(w, u16);
-TILE_READ(l, u32);
-TILE_READ(q, u64);
-
-#define TILE_WRITE(size, type) \
-void _tile_write##size(type val, unsigned long addr) \
-{ \
- int idx = 0; \
- if (addr > controllers[0].mem_resources[1].end && \
- addr > controllers[0].mem_resources[2].end) \
- idx = 1; \
- if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \
- (HV_VirtAddr)(&val), sizeof(type), addr)) \
- pr_err("PCI: write %zd bytes at 0x%lX failed\n", \
- sizeof(type), addr); \
-} \
-EXPORT_SYMBOL(_tile_write##size)
-
-TILE_WRITE(b, u8);
-TILE_WRITE(w, u16);
-TILE_WRITE(l, u32);
-TILE_WRITE(q, u64);
OpenPOWER on IntegriCloud