diff options
Diffstat (limited to 'arch/tile/include/asm/pci.h')
| -rw-r--r-- | arch/tile/include/asm/pci.h | 107 |
1 files changed, 41 insertions, 66 deletions
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index b0c15da..c3fc458 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -15,7 +15,29 @@ #ifndef _ASM_TILE_PCI_H #define _ASM_TILE_PCI_H -#include <asm/pci-bridge.h> +#include <linux/pci.h> + +/* + * Structure of a PCI controller (host bridge) + */ +struct pci_controller { + int index; /* PCI domain number */ + struct pci_bus *root_bus; + + int first_busno; + int last_busno; + + int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */ + int hv_mem_fd; /* fd to Hypervisor for MMIO operations */ + + struct pci_ops *ops; + + int irq_base; /* Base IRQ from the Hypervisor */ + int plx_gen1; /* flag for PLX Gen 1 configuration */ + + /* Address ranges that are routed to this controller/bridge. */ + struct resource mem_resources[3]; +}; /* * The hypervisor maps the entirety of CPA-space as bus addresses, so @@ -24,56 +46,12 @@ */ #define PCI_DMA_BUS_IS_PHYS 1 -struct pci_controller *pci_bus_to_hose(int bus); -unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp); int __init tile_pci_init(void); -void pci_iounmap(struct pci_dev *dev, void __iomem *addr); -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -void __devinit pcibios_fixup_bus(struct pci_bus *bus); -int __devinit _tile_cfg_read(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 *val); -int __devinit _tile_cfg_write(struct pci_controller *hose, - int bus, - int slot, - int function, - int offset, - int size, - u32 val); +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} -/* - * These are used to to config reads and writes in the early stages of - * setup before the driver infrastructure has been set up enough to be - * able to do config reads and writes. - */ -#define early_cfg_read(where, size, value) \ - _tile_cfg_read(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - -#define early_cfg_write(where, size, value) \ - _tile_cfg_write(controller, \ - current_bus, \ - pci_slot, \ - pci_fn, \ - where, \ - size, \ - value) - - - -#define PCICFG_BYTE 1 -#define PCICFG_WORD 2 -#define PCICFG_DWORD 4 +void __devinit pcibios_fixup_bus(struct pci_bus *bus); #define TILE_NUM_PCIE 2 @@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus) } /* - * I/O space is currently not supported. + * pcibios_assign_all_busses() tells whether or not the bus numbers + * should be reassigned, in case the BIOS didn't do it correctly, or + * in case we don't have a BIOS and we want to let Linux do it. */ +static inline int pcibios_assign_all_busses(void) +{ + return 1; +} -#define TILE_PCIE_LOWER_IO 0x0 -#define TILE_PCIE_UPPER_IO 0x10000 -#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF - -#define _PAGE_NO_CACHE 0 -#define _PAGE_GUARDED 0 - - -#define pcibios_assign_all_busses() pci_assign_all_buses -extern int pci_assign_all_buses; - +/* + * No special bus mastering setup handling. + */ static inline void pcibios_set_master(struct pci_dev *dev) { - /* No special bus mastering setup handling */ } #define PCIBIOS_MIN_MEM 0 -#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO +#define PCIBIOS_MIN_IO 0 /* * This flag tells if the platform is TILEmpower that needs * special configuration for the PLX switch chip. */ -extern int blade_pci; +extern int tile_plx_gen1; + +/* Use any cpu for PCI. */ +#define cpumask_of_pcibus(bus) cpu_online_mask /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h> @@ -122,7 +100,4 @@ extern int blade_pci; /* generic pci stuff */ #include <asm-generic/pci.h> -/* Use any cpu for PCI. */ -#define cpumask_of_pcibus(bus) cpu_online_mask - #endif /* _ASM_TILE_PCI_H */ |
