diff options
Diffstat (limited to 'arch/sparc/kernel/sun4m_irq.c')
| -rw-r--r-- | arch/sparc/kernel/sun4m_irq.c | 202 |
1 files changed, 98 insertions, 104 deletions
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 7f3b97f..69df625 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -1,5 +1,5 @@ -/* sun4m_irq.c - * arch/sparc/kernel/sun4m_irq.c: +/* + * sun4m irq support * * djhr: Hacked out of irq.c into a CPU dependent version. * @@ -9,101 +9,44 @@ * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk) */ -#include <linux/errno.h> -#include <linux/linkage.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/of.h> -#include <linux/of_device.h> - -#include <asm/ptrace.h> -#include <asm/processor.h> -#include <asm/system.h> -#include <asm/psr.h> -#include <asm/vaddrs.h> #include <asm/timer.h> -#include <asm/openprom.h> -#include <asm/oplib.h> #include <asm/traps.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> -#include <asm/smp.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/cacheflush.h> #include "irq.h" +#include "kernel.h" -struct sun4m_irq_percpu { - u32 pending; - u32 clear; - u32 set; -}; - -struct sun4m_irq_global { - u32 pending; - u32 mask; - u32 mask_clear; - u32 mask_set; - u32 interrupt_target; -}; - -/* Code in entry.S needs to get at these register mappings. */ -struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS]; -struct sun4m_irq_global __iomem *sun4m_irq_global; - -/* Dave Redman (djhr@tadpole.co.uk) - * The sun4m interrupt registers. - */ -#define SUN4M_INT_ENABLE 0x80000000 -#define SUN4M_INT_E14 0x00000080 -#define SUN4M_INT_E10 0x00080000 - -#define SUN4M_HARD_INT(x) (0x000000001 << (x)) -#define SUN4M_SOFT_INT(x) (0x000010000 << (x)) - -#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ -#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ -#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */ -#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */ -#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */ -#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ -#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ -#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ -#define SUN4M_INT_REALTIME 0x00080000 /* system timer */ -#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */ -#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */ -#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */ -#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ -#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ -#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ -#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */ - -#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \ - SUN4M_INT_M2S_WRITE_ERR | \ - SUN4M_INT_ECC_ERR | \ - SUN4M_INT_VME_ERR) - -#define SUN4M_INT_SBUS(x) (1 << (x+7)) -#define SUN4M_INT_VME(x) (1 << (x)) - -/* Interrupt levels used by OBP */ -#define OBP_INT_LEVEL_SOFT 0x10 -#define OBP_INT_LEVEL_ONBOARD 0x20 -#define OBP_INT_LEVEL_SBUS 0x30 -#define OBP_INT_LEVEL_VME 0x40 - -/* Interrupt level assignment on sun4m: +/* Sample sun4m IRQ layout: + * + * 0x22 - Power + * 0x24 - ESP SCSI + * 0x26 - Lance ethernet + * 0x2b - Floppy + * 0x2c - Zilog uart + * 0x32 - SBUS level 0 + * 0x33 - Parallel port, SBUS level 1 + * 0x35 - SBUS level 2 + * 0x37 - SBUS level 3 + * 0x39 - Audio, Graphics card, SBUS level 4 + * 0x3b - SBUS level 5 + * 0x3d - SBUS level 6 + * + * Each interrupt source has a mask bit in the interrupt registers. + * When the mask bit is set, this blocks interrupt deliver. So you + * clear the bit to enable the interrupt. + * + * Interrupts numbered less than 0x10 are software triggered interrupts + * and unused by Linux. + * + * Interrupt level assignment on sun4m: * * level source * ------------------------------------------------------------ - * 1 softint-1 + * 1 softint-1 * 2 softint-2, VME/SBUS level 1 * 3 softint-3, VME/SBUS level 2 * 4 softint-4, onboard SCSI @@ -138,10 +81,10 @@ struct sun4m_irq_global __iomem *sun4m_irq_global; * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and * Tadpole S3 GX systems. * - * esp: 0x24 onboard ESP SCSI - * le: 0x26 onboard Lance ETHERNET + * esp: 0x24 onboard ESP SCSI + * le: 0x26 onboard Lance ETHERNET * p9100: 0x32 SBUS level 1 P9100 video - * bpp: 0x33 SBUS level 2 BPP parallel port device + * bpp: 0x33 SBUS level 2 BPP parallel port device * DBRI: 0x39 SBUS level 5 DBRI ISDN audio * SUNW,leo: 0x39 SBUS level 5 LEO video * pcmcia: 0x3b SBUS level 6 PCMCIA controller @@ -152,8 +95,57 @@ struct sun4m_irq_global __iomem *sun4m_irq_global; * power: 0x22 onboard power device (XXX unknown mask bit XXX) */ + +/* Code in entry.S needs to get at these register mappings. */ +struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS]; +struct sun4m_irq_global __iomem *sun4m_irq_global; + +/* Dave Redman (djhr@tadpole.co.uk) + * The sun4m interrupt registers. + */ +#define SUN4M_INT_ENABLE 0x80000000 +#define SUN4M_INT_E14 0x00000080 +#define SUN4M_INT_E10 0x00080000 + +#define SUN4M_HARD_INT(x) (0x000000001 << (x)) +#define SUN4M_SOFT_INT(x) (0x000010000 << (x)) + +#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ +#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ +#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */ +#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */ +#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */ +#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ +#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ +#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ +#define SUN4M_INT_REALTIME 0x00080000 /* system timer */ +#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */ +#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */ +#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */ +#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ +#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ +#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ +#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */ + +#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \ + SUN4M_INT_M2S_WRITE_ERR | \ + SUN4M_INT_ECC_ERR | \ + SUN4M_INT_VME_ERR) + +#define SUN4M_INT_SBUS(x) (1 << (x+7)) +#define SUN4M_INT_VME(x) (1 << (x)) + +/* Interrupt levels used by OBP */ +#define OBP_INT_LEVEL_SOFT 0x10 +#define OBP_INT_LEVEL_ONBOARD 0x20 +#define OBP_INT_LEVEL_SBUS 0x30 +#define OBP_INT_LEVEL_VME 0x40 + +#define SUN4M_TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) +#define SUM4M_PROFILE_IRQ (OBP_INT_LEVEL_ONBOARD | 14) + static unsigned long irq_mask[0x50] = { - /* SMP */ + /* 0x00 - SMP */ 0, SUN4M_SOFT_INT(1), SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), @@ -162,7 +154,7 @@ static unsigned long irq_mask[0x50] = { SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), - /* soft */ + /* 0x10 - soft */ 0, SUN4M_SOFT_INT(1), SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), @@ -171,19 +163,19 @@ static unsigned long irq_mask[0x50] = { SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), - /* onboard */ + /* 0x20 - onboard */ 0, 0, 0, 0, SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0, SUN4M_INT_VIDEO, SUN4M_INT_MODULE, SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY, (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR, - /* sbus */ + /* 0x30 - sbus */ 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1), 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3), 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5), 0, SUN4M_INT_SBUS(6), 0, 0, - /* vme */ + /* 0x40 - vme */ 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1), 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3), 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5), @@ -193,7 +185,7 @@ static unsigned long irq_mask[0x50] = { static unsigned long sun4m_get_irqmask(unsigned int irq) { unsigned long mask; - + if (irq < 0x50) mask = irq_mask[irq]; else @@ -217,7 +209,7 @@ static void sun4m_disable_irq(unsigned int irq_nr) sbus_writel(mask, &sun4m_irq_global->mask_set); else sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); - local_irq_restore(flags); + local_irq_restore(flags); } static void sun4m_enable_irq(unsigned int irq_nr) @@ -226,17 +218,17 @@ static void sun4m_enable_irq(unsigned int irq_nr) int cpu = smp_processor_id(); /* Dreadful floppy hack. When we use 0x2b instead of - * 0x0b the system blows (it starts to whistle!). - * So we continue to use 0x0b. Fixme ASAP. --P3 - */ - if (irq_nr != 0x0b) { + * 0x0b the system blows (it starts to whistle!). + * So we continue to use 0x0b. Fixme ASAP. --P3 + */ + if (irq_nr != 0x0b) { mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) sbus_writel(mask, &sun4m_irq_global->mask_clear); else sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); - local_irq_restore(flags); + local_irq_restore(flags); } else { local_irq_save(flags); sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear); @@ -260,7 +252,7 @@ static unsigned long cpu_pil_to_imask[16] = { /*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, /*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO, /*14*/ SUN4M_INT_E14, -/*15*/ SUN4M_INT_ERROR +/*15*/ SUN4M_INT_ERROR, }; /* We assume the caller has disabled local interrupts when these are called, @@ -280,12 +272,14 @@ static void sun4m_enable_pil_irq(unsigned int pil) static void sun4m_send_ipi(int cpu, int level) { unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); } static void sun4m_clear_ipi(int cpu, int level) { unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); } @@ -314,7 +308,6 @@ struct sun4m_timer_global { static struct sun4m_timer_global __iomem *timers_global; -#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10); @@ -391,7 +384,7 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) master_l10_counter = &timers_global->l10_count; - err = request_irq(TIMER_IRQ, counter_fn, + err = request_irq(SUN4M_TIMER_IRQ, counter_fn, (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); if (err) { printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n", @@ -407,7 +400,6 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) #ifdef CONFIG_SMP { unsigned long flags; - extern unsigned long lvl14_save[4]; struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; /* For SMP we use the level 14 ticker, however the bootup code @@ -466,7 +458,9 @@ void __init sun4m_init_IRQ(void) BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM); - sparc_init_timers = sun4m_init_timers; + + sparc_irq_config.init_timers = sun4m_init_timers; + #ifdef CONFIG_SMP BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM); |
