diff options
Diffstat (limited to 'arch/sh')
99 files changed, 7127 insertions, 3034 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 54878f0..44982c1 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -118,7 +118,7 @@ endchoice config SH_FPU bool "FPU support" - depends on CPU_SH4 + depends on CPU_HAS_FPU default y help Selecting this option will enable support for SH processors that @@ -178,12 +178,6 @@ config CPU_HAS_INTEVT config CPU_HAS_MASKREG_IRQ bool -config CPU_HAS_INTC_IRQ - bool - -config CPU_HAS_INTC2_IRQ - bool - config CPU_HAS_IPR_IRQ bool @@ -205,6 +199,9 @@ config CPU_HAS_PTEA config CPU_HAS_DSP bool +config CPU_HAS_FPU + bool + endmenu menu "Board support" @@ -258,7 +255,6 @@ config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE select SYS_SUPPORTS_PCI - select CPU_HAS_INTC2_IRQ depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 @@ -309,7 +305,7 @@ config SH_MPC1211 config SH_SH03 bool "Interface CTP/PCI-SH03" - depends on CPU_SUBTYPE_SH7751 && BROKEN + depends on CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ select SYS_SUPPORTS_PCI help @@ -395,11 +391,22 @@ config SH_LBOX_RE2 help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. +config SH_X3PROTO + bool "SH-X3 Prototype board" + depends on CPU_SUBTYPE_SHX3 + +config SH_MAGIC_PANEL_R2 + bool "Magic Panel R2" + depends on CPU_SUBTYPE_SH7720 + help + Select Magic Panel R2 if configuring for Magic Panel R2. + endmenu source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" +source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" @@ -563,10 +570,19 @@ config NR_CPUS source "kernel/Kconfig.preempt" -config NODES_SHIFT - int - default "1" - depends on NEED_MULTIPLE_NODES +config GUSA + def_bool y + depends on !SMP + help + This enables support for gUSA (general UserSpace Atomicity). + This is the default implementation for both UP and non-ll/sc + CPUs, and is used by the libc, amongst others. + + For additional information, design information can be found + in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>. + + This should only be disabled for special cases where alternate + atomicity implementations exist. endmenu @@ -659,6 +675,17 @@ config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 +config MAPLE + bool "Maple Bus support" + depends on SH_DREAMCAST + help + The Maple Bus is SEGA's serial communication bus for peripherals + on the Dreamcast. Without this bus support you won't be able to + get your Dreamcast keyboard etc to work, so most users + probably want to say 'Y' here, unless you are only using the + Dreamcast with a serial line terminal or a remote network + connection. + config CF_ENABLER bool "Compact Flash Enabler support" depends on SOLUTION_ENGINE || SH_SH03 diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 52f6a99..b507b50 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -28,13 +28,17 @@ config EARLY_SCIF_CONSOLE serial I/O. config EARLY_SCIF_CONSOLE_PORT - hex "SCIF port for early console" + hex depends on EARLY_SCIF_CONSOLE default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe9800" if CPU_SUBTYPE_SH7206 default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 + default "0xa4430000" if CPU_SUBTYPE_SH7720 + default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe80000" if CPU_SH4 + default "0x00000000" config EARLY_PRINTK bool "Early printk support" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 97ac586..a0a2083 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -118,6 +118,7 @@ machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw +machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan @@ -125,6 +126,7 @@ machdir-$(CONFIG_SH_SHMIN) += shmin machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 +machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 incdir-y := $(notdir $(machdir-y)) @@ -135,7 +137,7 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -core-$(CONFIG_VOYAGERGX) += arch/sh/cchips/voyagergx/ +core-$(CONFIG_MFD_SM501) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c index d1c1460..640ca2a 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -20,9 +20,9 @@ #define APM_CRITICAL 10 #define APM_LOW 30 -#define HP680_BATTERY_MAX 875 -#define HP680_BATTERY_MIN 600 -#define HP680_BATTERY_AC_ON 900 +#define HP680_BATTERY_MAX 898 +#define HP680_BATTERY_MIN 486 +#define HP680_BATTERY_AC_ON 1023 #define MODNAME "hp6x0_apm" @@ -65,7 +65,7 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info) static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) { - if (!apm_suspended) + if (!APM_DISABLED) apm_queue_event(APM_USER_SUSPEND); return IRQ_HANDLED; @@ -91,7 +91,6 @@ static int __init hp6x0_apm_init(void) static void __exit hp6x0_apm_exit(void) { free_irq(HP680_BTN_IRQ, 0); - apm_get_info = NULL; } module_init(hp6x0_apm_init); diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 7ae7089..2f414ac 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -7,7 +7,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Setup code for an HP680 (internal peripherials only) + * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only) */ #include <linux/types.h> #include <linux/init.h> @@ -19,7 +19,7 @@ #include <asm/cpu/dac.h> #define SCPCR 0xa4000116 -#define SCPDR 0xa4000136 +#define SCPDR 0xa4000136 /* CF Slot */ static struct resource cf_ide_resources[] = { @@ -34,7 +34,7 @@ static struct resource cf_ide_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = 93, + .start = 77, .flags = IORESOURCE_IRQ, }, }; @@ -46,10 +46,22 @@ static struct platform_device cf_ide_device = { .resource = cf_ide_resources, }; +static struct platform_device jornadakbd_device = { + .name = "jornada680_kbd", + .id = -1, +}; + static struct platform_device *hp6xx_devices[] __initdata = { - &cf_ide_device, + &cf_ide_device, + &jornadakbd_device, }; +static void __init hp6xx_init_irq(void) +{ + /* Gets touchscreen and powerbutton IRQ working */ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + static int __init hp6xx_devices_setup(void) { return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices)); @@ -61,11 +73,11 @@ static void __init hp6xx_setup(char **cmdline_p) u16 v; v = inw(HD64461_STBCR); - v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | - HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | - HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | - HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST | - HD64461_STBCR_SAFECKE_IST; + v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST | + HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST | + HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST | + HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST| + HD64461_STBCR_SAFECKE_IST; #ifndef CONFIG_HD64461_ENABLER v |= HD64461_STBCR_SPC1ST; #endif @@ -101,6 +113,9 @@ device_initcall(hp6xx_devices_setup); static struct sh_machine_vector mv_hp6xx __initmv = { .mv_name = "hp6xx", .mv_setup = hp6xx_setup, - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM, + /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ + .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, .mv_irq_demux = hd64461_irq_demux, + /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ + .mv_init_irq = hp6xx_init_irq, }; diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig new file mode 100644 index 0000000..b0abddc3 --- /dev/null +++ b/arch/sh/boards/magicpanelr2/Kconfig @@ -0,0 +1,13 @@ +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile new file mode 100644 index 0000000..7a6d586 --- /dev/null +++ b/arch/sh/boards/magicpanelr2/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Magic Panel specific parts +# + +obj-y := setup.o
\ No newline at end of file diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/magicpanelr2/setup.c new file mode 100644 index 0000000..f3b8b07 --- /dev/null +++ b/arch/sh/boards/magicpanelr2/setup.c @@ -0,0 +1,394 @@ +/* + * linux/arch/sh/boards/magicpanel/setup.c + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Magic Panel Release 2 board setup + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/map.h> +#include <asm/magicpanelr2.h> +#include <asm/heartbeat.h> + +#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) + +/* Prefer cmdline over RedBoot */ +static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; + +/* Wait until reset finished. Timeout is 100ms. */ +static int __init ethernet_reset_finished(void) +{ + int i; + + if (LAN9115_READY) + return 1; + + for (i = 0; i < 10; ++i) { + mdelay(10); + if (LAN9115_READY) + return 1; + } + + return 0; +} + +static void __init reset_ethernet(void) +{ + /* PMDR: LAN_RESET=on */ + CLRBITS_OUTB(0x10, PORT_PMDR); + + udelay(200); + + /* PMDR: LAN_RESET=off */ + SETBITS_OUTB(0x10, PORT_PMDR); +} + +static void __init setup_chip_select(void) +{ + /* CS2: LAN (0x08000000 - 0x0bffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x36db0400, CS2BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x000003c0, CS2WCR); + + /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS4BCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS4WCR); + + /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5ABCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5AWCR); + + /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS5BBCR); + /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + ctrl_outl(0x00100981, CS5BWCR); + + /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ + /* no idle cycles, normal space, 8 bit data bus */ + ctrl_outl(0x00000200, CS6ABCR); + /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ + ctrl_outl(0x001009C1, CS6AWCR); +} + +static void __init setup_port_multiplexing(void) +{ + /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); + * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); + */ + ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + + /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); + * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); + */ + ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + + /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); + * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; + */ + ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + + /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); + * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); + */ + ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ + + /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; + * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; + */ + ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ + + /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; + * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); + */ + ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ + + /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); + * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); + */ + ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ + + /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); + * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; + */ + ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ + + /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; + * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; + */ + ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ + + /* K7 (x); K6 (x); K5 (x); K4 (x); + * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) + */ + ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ + + /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; + * L3 TCK; L2 (x); L1 (x); L0 (x); + */ + ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ + + /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); + * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); + * M1 CS5B(CAN3_CS); M0 GPI+(nc); + */ + ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ + + /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, + * LAN_RESET=off, BUZZER=off, LCD_BL=off + */ +#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 + ctrl_outb(0x30, PORT_PMDR); +#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 + ctrl_outb(0xF0, PORT_PMDR); +#else +#error Unknown revision of PLATFORM_MP_R2 +#endif + + /* P7 (x); P6 (x); P5 (x); + * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); + * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) + */ + ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ + ctrl_outb(0x10, PORT_PPDR); + + /* R7 A25; R6 A24; R5 A23; R4 A22; + * R3 A21; R2 A20; R1 A19; R0 A0; + */ + ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */ + + /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); + * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; + */ + ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ + + /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; + * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) + */ + ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ + + /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); + * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; + */ + ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ + + /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); + * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); + */ + ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ +} + +static void __init mpr2_setup(char **cmdline_p) +{ + __set_io_port_base(0xa0000000); + + /* set Pin Select Register A: + * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, + * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND + */ + ctrl_outw(0xAABC, PORT_PSELA); + /* set Pin Select Register B: + * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, + * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved + */ + ctrl_outw(0x3C00, PORT_PSELB); + /* set Pin Select Register C: + * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved + */ + ctrl_outw(0x0000, PORT_PSELC); + /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, + * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved + */ + ctrl_outw(0x0000, PORT_PSELD); + /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ + ctrl_outw(0x0101, PORT_UTRCTL); + /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ + ctrl_outw(0xA5C0, PORT_UCLKCR_W); + + setup_chip_select(); + + setup_port_multiplexing(); + + reset_ethernet(); + + printk(KERN_INFO "Magic Panel Release 2 A.%i\n", + CONFIG_SH_MAGIC_PANEL_R2_VERSION); + + if (ethernet_reset_finished() == 0) + printk(KERN_WARNING "Ethernet not ready\n"); +} + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0xa8000000, + .end = 0xabffffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .flags = HEARTBEAT_INVERTED, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition mpr2_partitions[] = { + /* Reserved for bootloader, read-only */ + { + .name = "Bootloader", + .offset = 0x00000000UL, + .size = MPR2_MTD_BOOTLOADER_SIZE, + .mask_flags = MTD_WRITEABLE, + }, + /* Reserved for kernel image */ + { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = MPR2_MTD_KERNEL_SIZE, + }, + /* Rest is used for Flash FS */ + { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x00000000, + .end = 0x2000000UL, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info mpr2_flash_map = { + .name = "Magic Panel R2 Flash", + .size = 0x2000000UL, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&mpr2_flash_map); + flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = mpr2_partitions; + flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + +/* + * Add all resources to the platform_device + */ + +static struct platform_device *mpr2_devices[] __initdata = { + &heartbeat_device, + &smc911x_device, + &flash_device, +}; + + +static int __init mpr2_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); +} +device_initcall(mpr2_devices_setup); + +/* + * Initialize IRQ setting + */ +static void __init init_mpr2_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ + + set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ + set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ + set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ + set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ + set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ + set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ + + intc_set_priority(32, 13); /* IRQ0 CAN1 */ + intc_set_priority(33, 13); /* IRQ0 CAN2 */ + intc_set_priority(34, 13); /* IRQ0 CAN3 */ + intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ +} + +/* + * The Machine Vector + */ + +static struct sh_machine_vector mv_mpr2 __initmv = { + .mv_name = "mpr2", + .mv_setup = mpr2_setup, + .mv_init_irq = init_mpr2_IRQ, +}; diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 8ce03e0..fede363 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -285,7 +285,7 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no) static struct resource heartbeat_resources[] = { [0] = { .start = 0xa2000000, - .end = 0xa2000000 + 8 - 1, + .end = 0xa2000000, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index b1d20af..dd26182 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -1,9 +1,10 @@ # # Makefile for the R7780RP-1 specific parts of the kernel # -irqinit-y := irq-r7780rp.o +irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o -obj-y := setup.o irq.o $(irqinit-y) +irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o irq.o +obj-y := setup.o $(irqinit-y) ifneq ($(CONFIG_SH_R7785RP),y) obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c new file mode 100644 index 0000000..59b47fe --- /dev/null +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -0,0 +1,61 @@ +/* + * Renesas Solutions Highlander R7780MP Support. + * + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/r7780rp.h> + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + AX88796, /* Ethernet controller */ + CF, /* Compact Flash */ + PSW, /* Push Switch */ + EXT1, /* EXT1n IRQ */ + EXT4, /* EXT4n IRQ */ +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(AX88796, IRQ_AX88796), + INTC_IRQ(EXT1, IRQ_EXT1), + INTC_IRQ(EXT4, IRQ_EXT4), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { 0, 0, 0, 0, CF, 0, 0, 0, + 0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, 0, 0, + 0, 0, 0, 0, + 0, IRQ_EXT4, 0, IRQ_EXT1, + 0, IRQ_AX88796, IRQ_PSW, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, + NULL, NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_init_irq_r7780mp(void) +{ + if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { + printk(KERN_INFO "Using r7780mp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } + + return NULL; +} diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index f5f3587..fa4a534 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -9,13 +9,15 @@ * for more details. */ #include <linux/init.h> -#include <asm/io.h> +#include <linux/io.h> #include <asm/r7780rp.h> -void __init highlander_init_irq(void) +unsigned char * __init highlander_init_irq_r7780rp(void) { int i; for (i = 0; i < 15; i++) make_r7780rp_irq(i); + + return NULL; } diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index dd6ec4c..b2c6a84 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -1,19 +1,55 @@ /* - * Renesas Solutions Highlander R7780RP-1 Support. + * Renesas Solutions Highlander R7785RP Support. * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include <linux/init.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/io.h> #include <asm/r7780rp.h> -void __init highlander_init_irq(void) +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + AX88796, /* Ethernet controller */ + CF, /* Compact Flash */ +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4000010, 0, 16, /* IRLMCR1 */ + { 0, 0, 0, 0, CF, AX88796, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 0, IRQ_CF, 0, 0, + 0, 0, 0, 0, + 0, 0, IRQ_AX88796, 0, + 0, 0, 0, +}; + +static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, + NULL, NULL, mask_registers, NULL, NULL); + +unsigned char * __init highlander_init_irq_r7785rp(void) { + if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + return NULL; + + printk(KERN_INFO "Using r7785rp interrupt controller.\n"); + ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ /* Setup the FPGA IRL */ @@ -24,6 +60,6 @@ void __init highlander_init_irq(void) ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */ - make_r7780rp_irq(1); /* CF card */ - make_r7780rp_irq(10); /* On-board ethernet */ + register_intc_controller(&intc_desc); + return irl2irq; } diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index adb529d..afe9de7 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -19,6 +19,7 @@ #include <asm/machvec.h> #include <asm/r7780rp.h> #include <asm/clock.h> +#include <asm/heartbeat.h> #include <asm/io.h> static struct resource r8a66597_usb_host_resources[] = { @@ -30,8 +31,8 @@ static struct resource r8a66597_usb_host_resources[] = { }, [1] = { .name = "r8a66597_hcd", - .start = 11, /* irq number */ - .end = 11, + .start = IRQ_EXT1, /* irq number */ + .end = IRQ_EXT1, .flags = IORESOURCE_IRQ, }, }; @@ -56,8 +57,8 @@ static struct resource m66592_usb_peripheral_resources[] = { }, [1] = { .name = "m66592_udc", - .start = 9, /* irq number */ - .end = 9, + .start = IRQ_EXT4, /* irq number */ + .end = IRQ_EXT4, .flags = IORESOURCE_IRQ, }, }; @@ -85,11 +86,7 @@ static struct resource cf_ide_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { -#ifdef CONFIG_SH_R7780RP - .start = 4, -#else - .start = 1, -#endif + .start = IRQ_CF, .flags = IORESOURCE_IRQ, }, }; @@ -108,16 +105,23 @@ static struct platform_device cf_ide_device = { }, }; -static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; - static struct resource heartbeat_resources[] = { [0] = { .start = PA_OBLED, - .end = PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_OBLED, .flags = IORESOURCE_MEM, }, }; +#ifndef CONFIG_SH_R7785RP +static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; +#endif + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, @@ -125,7 +129,7 @@ static struct platform_device heartbeat_device = { /* R7785RP has a slightly more sensible FPGA.. */ #ifndef CONFIG_SH_R7785RP .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, #endif .num_resources = ARRAY_SIZE(heartbeat_resources), @@ -217,12 +221,50 @@ static void __init highlander_setup(char **cmdline_p) pm_power_off = r7780rp_power_off; } +static unsigned char irl2irq[HL_NR_IRL]; + +int highlander_irq_demux(int irq) +{ + if (irq >= HL_NR_IRL || !irl2irq[irq]) + return irq; + + return irl2irq[irq]; +} + +void __init highlander_init_irq(void) +{ + unsigned char *ucp = NULL; + + do { +#ifdef CONFIG_SH_R7780MP + ucp = highlander_init_irq_r7780mp(); + if (ucp) + break; +#endif +#ifdef CONFIG_SH_R7785RP + ucp = highlander_init_irq_r7785rp(); + if (ucp) + break; +#endif +#ifdef CONFIG_SH_R7780RP + highlander_init_irq_r7780rp(); + ucp = irl2irq; + break; +#endif + } while (0); + + if (ucp) { + plat_irq_setup_pins(IRQ_MODE_IRL3210); + memcpy(irl2irq, ucp, HL_NR_IRL); + } +} + /* * The Machine Vector */ static struct sh_machine_vector mv_highlander __initmv = { .mv_name = "Highlander", - .mv_nr_irqs = 109, .mv_setup = highlander_setup, .mv_init_irq = highlander_init_irq, + .mv_irq_demux = highlander_irq_demux, }; diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/renesas/rts7751r2d/Kconfig index 7780d1fb..8122a96 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Kconfig +++ b/arch/sh/boards/renesas/rts7751r2d/Kconfig @@ -1,11 +1,22 @@ if SH_RTS7751R2D -menu "RTS7751R2D options" +menu "RTS7751R2D Board Revision" -config RTS7751R2D_REV11 - bool "RTS7751R2D Rev. 1.1 board support" +config RTS7751R2D_PLUS + bool "R2D-PLUS" help - Selecting this option will support version rev. 1.1. + Selecting this option will configure the kernel for R2D-PLUS. + + R2D-PLUS is the smaller of the two R2D board versions, equipped + with a single PCI slot. + +config RTS7751R2D_1 + bool "R2D-1" + help + Selecting this option will configure the kernel for R2D-1. + + R2D-1 is the larger of the two R2D board versions, equipped + with two PCI slots. endmenu endif diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 0bae904..7cc2813 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -1,84 +1,159 @@ /* * linux/arch/sh/boards/renesas/rts7751r2d/irq.c * + * Copyright (C) 2007 Magnus Damm * Copyright (C) 2000 Kazumoto Kojima * - * Renesas Technology Sales RTS7751R2D Support. + * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1. * * Modified for RTS7751R2D by * Atom Create Engineering Co., Ltd. 2002. */ #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <asm/voyagergx.h> #include <asm/rts7751r2d.h> -#if defined(CONFIG_RTS7751R2D_REV11) -static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0}; -#else -static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0}; -#endif +#define R2D_NR_IRL 13 -extern int voyagergx_irq_demux(int irq); -extern void setup_voyagergx_irq(void); +enum { + UNUSED = 0, -static void enable_rts7751r2d_irq(unsigned int irq) -{ - /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); -} + /* board specific interrupt sources (R2D-1 and R2D-PLUS) */ + EXT, /* EXT_INT0-3 */ + RTC_T, RTC_A, /* Real Time Clock */ + AX88796, /* Ethernet controller (R2D-1 board) */ + KEY, /* Key input (R2D-PLUS board) */ + SDCARD, /* SD Card */ + CF_CD, CF_IDE, /* CF Card Detect + CF IDE */ + SM501, /* SM501 aka Voyager */ + PCI_INTD_RTL8139, /* Ethernet controller */ + PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */ + PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */ + PCI_INTB_SLOT, /* PCI Slot 3.3v (R2D-1 board) */ + PCI_INTA_SLOT, /* PCI Slot 3.3v */ + TP, /* Touch Panel */ +}; -static void disable_rts7751r2d_irq(unsigned int irq) -{ - /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), - IRLCNTR1); -} +#ifdef CONFIG_RTS7751R2D_1 + +/* Vectors for R2D-1 */ +static struct intc_vect vectors_r2d_1[] __initdata = { + INTC_IRQ(EXT, IRQ_EXT), + INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A), + INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD), + INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */ + INTC_IRQ(SM501, IRQ_VOYAGER), + INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD), + INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC), + INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB), + INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA), + INTC_IRQ(TP, IRQ_TP), +}; + +/* IRLMSK mask register layout for R2D-1 */ +static struct intc_mask_reg mask_registers_r2d_1[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { TP, PCI_INTA_SLOT, PCI_INTB_SLOT, + PCI_INTC_PCI1520, PCI_INTD_RTL8139, + SM501, CF_IDE, CF_CD, SDCARD, AX88796, + RTC_A, RTC_T, 0, 0, 0, EXT } }, +}; + +/* IRLn to IRQ table for R2D-1 */ +static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = { + IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC, + IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T, + IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT, + IRQ_TP, +}; + +static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1, + NULL, NULL, mask_registers_r2d_1, NULL, NULL); + +#endif /* CONFIG_RTS7751R2D_1 */ + +#ifdef CONFIG_RTS7751R2D_PLUS + +/* Vectors for R2D-PLUS */ +static struct intc_vect vectors_r2d_plus[] __initdata = { + INTC_IRQ(EXT, IRQ_EXT), + INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A), + INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD), + INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), + INTC_IRQ(SM501, IRQ_VOYAGER), + INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD), + INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC), + INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB), + INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA), + INTC_IRQ(TP, IRQ_TP), +}; + +/* IRLMSK mask register layout for R2D-PLUS */ +static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = { + { 0xa4000000, 0, 16, /* IRLMSK */ + { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139, + PCI_INTC_PCI1520, PCI_INTD_RTL8139, + SM501, CF_IDE, CF_CD, SDCARD, KEY, + RTC_A, RTC_T, 0, 0, 0, EXT } }, +}; + +/* IRLn to IRQ table for R2D-PLUS */ +static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = { + IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC, + IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T, + IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT, + IRQ_TP, +}; + +static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus, + NULL, NULL, mask_registers_r2d_plus, NULL, NULL); + +#endif /* CONFIG_RTS7751R2D_PLUS */ + +static unsigned char irl2irq[R2D_NR_IRL]; int rts7751r2d_irq_demux(int irq) { - return voyagergx_irq_demux(irq); -} + if (irq >= R2D_NR_IRL || !irl2irq[irq]) + return irq; -static struct irq_chip rts7751r2d_irq_chip __read_mostly = { - .name = "rts7751r2d", - .mask = disable_rts7751r2d_irq, - .unmask = enable_rts7751r2d_irq, - .mask_ack = disable_rts7751r2d_irq, -}; + return irl2irq[irq]; +} /* * Initialize IRQ setting */ void __init init_rts7751r2d_IRQ(void) { - int i; - - /* IRL0=KEY Input - * IRL1=Ethernet - * IRL2=CF Card - * IRL3=CF Card Insert - * IRL4=PCMCIA - * IRL5=VOYAGER - * IRL6=RTC Alarm - * IRL7=RTC Timer - * IRL8=SD Card - * IRL9=PCI Slot #1 - * IRL10=PCI Slot #2 - * IRL11=Extention #0 - * IRL12=Extention #1 - * IRL13=Extention #2 - * IRL14=Extention #3 - */ - - for (i=0; i<15; i++) { - disable_irq_nosync(i); - set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip, - handle_level_irq, "level"); - enable_rts7751r2d_irq(i); + struct intc_desc *d; + + switch (ctrl_inw(PA_VERREG) & 0xf0) { +#ifdef CONFIG_RTS7751R2D_PLUS + case 0x10: + printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n"); + d = &intc_desc_r2d_plus; + memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL); + break; +#endif +#ifdef CONFIG_RTS7751R2D_1 + case 0x00: /* according to manual */ + case 0x30: /* in reality */ + printk(KERN_INFO "Using R2D-1 interrupt controller.\n"); + d = &intc_desc_r2d_1; + memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL); + break; +#endif + default: + printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n", + ctrl_inw(PA_VERREG)); + return; } + register_intc_controller(d); +#ifdef CONFIG_MFD_SM501 setup_voyagergx_irq(); +#endif } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 6f7029d..37f2c0b 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -45,20 +45,16 @@ static void __init voyagergx_serial_init(void) static struct resource cf_ide_resources[] = { [0] = { .start = PA_AREA5_IO + 0x1000, - .end = PA_AREA5_IO + 0x1000 + 0x08 - 1, + .end = PA_AREA5_IO + 0x1000 + 0x10 - 0x2, .flags = IORESOURCE_MEM, }, [1] = { .start = PA_AREA5_IO + 0x80c, - .end = PA_AREA5_IO + 0x80c + 0x16 - 1, + .end = PA_AREA5_IO + 0x80c, .flags = IORESOURCE_MEM, }, [2] = { -#ifdef CONFIG_RTS7751R2D_REV11 - .start = 1, -#else - .start = 2, -#endif + .start = IRQ_CF_IDE, .flags = IORESOURCE_IRQ, }, }; @@ -77,12 +73,28 @@ static struct platform_device cf_ide_device = { }, }; +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_OUTPORT, + .end = PA_OUTPORT, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +#ifdef CONFIG_MFD_SM501 static struct plat_serial8250_port uart_platform_data[] = { { .membase = (void __iomem *)VOYAGER_UART_BASE, .mapbase = VOYAGER_UART_BASE, .iotype = UPIO_MEM, - .irq = VOYAGER_UART0_IRQ, + .irq = IRQ_SM501_U0, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, .regshift = 2, .uartclk = (9600 * 16), @@ -98,21 +110,6 @@ static struct platform_device uart_device = { }, }; -static struct resource heartbeat_resources[] = { - [0] = { - .start = PA_OUTPORT, - .end = PA_OUTPORT + 8 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - static struct resource sm501_resources[] = { [0] = { .start = 0x10000000, @@ -125,7 +122,7 @@ static struct resource sm501_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = 32, + .start = IRQ_SM501_CV, .flags = IORESOURCE_IRQ, }, }; @@ -137,22 +134,19 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; +#endif /* CONFIG_MFD_SM501 */ + static struct platform_device *rts7751r2d_devices[] __initdata = { +#ifdef CONFIG_MFD_SM501 &uart_device, - &heartbeat_device, &sm501_device, +#endif + &cf_ide_device, + &heartbeat_device, }; static int __init rts7751r2d_devices_setup(void) { - int ret; - - if (ctrl_inw(PA_BVERREG) == 0x10) { /* only working on R2D-PLUS */ - ret = platform_device_register(&cf_ide_device); - if (ret) - return ret; - } - return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } @@ -163,6 +157,34 @@ static void rts7751r2d_power_off(void) ctrl_outw(0x0001, PA_POWOFF); } +static inline unsigned char is_ide_ioaddr(unsigned long addr) +{ + return ((cf_ide_resources[0].start <= addr && + addr <= cf_ide_resources[0].end) || + (cf_ide_resources[1].start <= addr && + addr <= cf_ide_resources[1].end)); +} + +void rts7751r2d_writeb(u8 b, void __iomem *addr) +{ + unsigned long tmp = (unsigned long __force)addr; + + if (is_ide_ioaddr(tmp)) + ctrl_outw((u16)b, tmp); + else + ctrl_outb(b, tmp); +} + +u8 rts7751r2d_readb(void __iomem *addr) +{ + unsigned long tmp = (unsigned long __force)addr; + + if (is_ide_ioaddr(tmp)) + return ctrl_inw(tmp) & 0xff; + else + return ctrl_inb(tmp); +} + /* * Initialize the board */ @@ -187,12 +209,11 @@ static void __init rts7751r2d_setup(char **cmdline_p) static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_name = "RTS7751R2D", .mv_setup = rts7751r2d_setup, - .mv_nr_irqs = 72, - .mv_init_irq = init_rts7751r2d_IRQ, .mv_irq_demux = rts7751r2d_irq_demux, - -#ifdef CONFIG_USB_SM501 + .mv_writeb = rts7751r2d_writeb, + .mv_readb = rts7751r2d_readb, +#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD) .mv_consistent_alloc = voyagergx_consistent_alloc, .mv_consistent_free = voyagergx_consistent_free, #endif diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/renesas/x3proto/Makefile new file mode 100644 index 0000000..983e455 --- /dev/null +++ b/arch/sh/boards/renesas/x3proto/Makefile @@ -0,0 +1 @@ +obj-y += setup.o ilsel.o diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/renesas/x3proto/ilsel.c new file mode 100644 index 0000000..6d4454f --- /dev/null +++ b/arch/sh/boards/renesas/x3proto/ilsel.c @@ -0,0 +1,151 @@ +/* + * arch/sh/boards/renesas/x3proto/ilsel.c + * + * Helper routines for SH-X3 proto board ILSEL. + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/bitmap.h> +#include <linux/io.h> +#include <asm/ilsel.h> + +/* + * ILSEL is split across: + * + * ILSEL0 - 0xb8100004 [ Levels 1 - 4 ] + * ILSEL1 - 0xb8100006 [ Levels 5 - 8 ] + * ILSEL2 - 0xb8100008 [ Levels 9 - 12 ] + * ILSEL3 - 0xb810000a [ Levels 13 - 15 ] + * + * With each level being relative to an ilsel_source_t. + */ +#define ILSEL_BASE 0xb8100004 +#define ILSEL_LEVELS 15 + +/* + * ILSEL level map, in descending order from the highest level down. + * + * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping + * directly to IRLs. As the IRQs are numbered in reverse order relative + * to the interrupt level, the level map is carefully managed to ensure a + * 1:1 mapping between the bit position and the IRQ number. + * + * This careful constructions allows ilsel_enable*() to be referenced + * directly for hooking up an ILSEL set and getting back an IRQ which can + * subsequently be used for internal accounting in the (optional) disable + * path. + */ +static unsigned long ilsel_level_map; + +static inline unsigned int ilsel_offset(unsigned int bit) +{ + return ILSEL_LEVELS - bit - 1; +} + +static inline unsigned long mk_ilsel_addr(unsigned int bit) +{ + return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1); +} + +static inline unsigned int mk_ilsel_shift(unsigned int bit) +{ + return (ilsel_offset(bit) & 0x3) << 2; +} + +static void __ilsel_enable(ilsel_source_t set, unsigned int bit) +{ + unsigned int tmp, shift; + unsigned long addr; + + addr = mk_ilsel_addr(bit); + shift = mk_ilsel_shift(bit); + + pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n", + __FUNCTION__, bit, addr, shift, set); + + tmp = ctrl_inw(addr); + tmp &= ~(0xf << shift); + tmp |= set << shift; + ctrl_outw(tmp, addr); +} + +/** + * ilsel_enable - Enable an ILSEL set. + * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h). + * + * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest + * available interrupt level. Callers should take care to order callsites + * noting descending interrupt levels. Aliasing FPGA and external board + * IRQs need to use ilsel_enable_fixed(). + * + * The return value is an IRQ number that can later be taken down with + * ilsel_disable(). + */ +int ilsel_enable(ilsel_source_t set) +{ + unsigned int bit; + + /* Aliased sources must use ilsel_enable_fixed() */ + BUG_ON(set > ILSEL_KEY); + + do { + bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS); + } while (test_and_set_bit(bit, &ilsel_level_map)); + + __ilsel_enable(set, bit); + + return bit; +} +EXPORT_SYMBOL_GPL(ilsel_enable); + +/** + * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level + * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h). + * @level: Interrupt level (1 - 15) + * + * Enables a given ILSEL source at a fixed interrupt level. Necessary + * both for level reservation as well as for aliased sources that only + * exist on special ILSEL#s. + * + * Returns an IRQ number (as ilsel_enable()). + */ +int ilsel_enable_fixed(ilsel_source_t set, unsigned int level) +{ + unsigned int bit = ilsel_offset(level - 1); + + if (test_and_set_bit(bit, &ilsel_level_map)) + return -EBUSY; + + __ilsel_enable(set, bit); + + return bit; +} +EXPORT_SYMBOL_GPL(ilsel_enable_fixed); + +/** + * ilsel_disable - Disable an ILSEL set + * @irq: Bit position for ILSEL set value (retval from enable routines) + * + * Disable a previously enabled ILSEL set. + */ +void ilsel_disable(unsigned int irq) +{ + unsigned long addr; + unsigned int tmp; + + addr = mk_ilsel_addr(irq); + + tmp = ctrl_inw(addr); + tmp &= ~(0xf << mk_ilsel_shift(irq)); + ctrl_outw(tmp, addr); + + clear_bit(irq, &ilsel_level_map); +} +EXPORT_SYMBOL_GPL(ilsel_disable); diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/renesas/x3proto/setup.c new file mode 100644 index 0000000..abc5b6d --- /dev/null +++ b/arch/sh/boards/renesas/x3proto/setup.c @@ -0,0 +1,136 @@ +/* + * arch/sh/boards/renesas/x3proto/setup.c + * + * Renesas SH-X3 Prototype Board Support. + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <asm/ilsel.h> + +static struct resource heartbeat_resources[] = { + [0] = { + .start = 0xb8140020, + .end = 0xb8140020, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x18000300, + .end = 0x18000300 + 0x10 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* Filled in by ilsel */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .resource = smc91x_resources, + .num_resources = ARRAY_SIZE(smc91x_resources), +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0x18040000, + .end = 0x18080000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + /* Filled in by ilsel */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource m66592_usb_peripheral_resources[] = { + [0] = { + .name = "m66592_udc", + .start = 0x18080000, + .end = 0x180c0000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "m66592_udc", + /* Filled in by ilsel */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device m66592_usb_peripheral_device = { + .name = "m66592_udc", + .id = -1, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(m66592_usb_peripheral_resources), + .resource = m66592_usb_peripheral_resources, +}; + +static struct platform_device *x3proto_devices[] __initdata = { + &heartbeat_device, + &smc91x_device, + &r8a66597_usb_host_device, + &m66592_usb_peripheral_device, +}; + +static int __init x3proto_devices_setup(void) +{ + r8a66597_usb_host_resources[1].start = + r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I); + + m66592_usb_peripheral_resources[1].start = + m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I); + + smc91x_resources[1].start = + smc91x_resources[1].end = ilsel_enable(ILSEL_LAN); + + return platform_add_devices(x3proto_devices, + ARRAY_SIZE(x3proto_devices)); +} +device_initcall(x3proto_devices_setup); + +static void __init x3proto_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRL3210); + + /* Set ICR0.LVLMODE */ + ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000); +} + +static struct sh_machine_vector mv_x3proto __initmv = { + .mv_name = "x3proto", + .mv_init_irq = x3proto_init_irq, +}; diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c index b557273..1308e61 100644 --- a/arch/sh/boards/se/7206/io.c +++ b/arch/sh/boards/se/7206/io.c @@ -26,22 +26,24 @@ static inline void delay(void) static inline volatile __u16 * port2adr(unsigned int port) { - if (port >= 0x2000) + if (port >= 0x2000 && port < 0x2020) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x300 || port < 0x310) + else if (port >= 0x300 && port < 0x310) return (volatile __u16 *) (PA_SMSC + (port - 0x300)); + + return (volatile __u16 *)port; } unsigned char se7206_inb(unsigned long port) { - return (*port2adr(port))&0xff; + return (*port2adr(port)) & 0xff; } unsigned char se7206_inb_p(unsigned long port) { unsigned long v; - v = (*port2adr(port))&0xff; + v = (*port2adr(port)) & 0xff; delay(); return v; } @@ -51,12 +53,6 @@ unsigned short se7206_inw(unsigned long port) return *port2adr(port);; } -unsigned int se7206_inl(unsigned long port) -{ - maybebadio(port); - return 0; -} - void se7206_outb(unsigned char value, unsigned long port) { *(port2adr(port)) = value; @@ -73,11 +69,6 @@ void se7206_outw(unsigned short value, unsigned long port) *port2adr(port) = value; } -void se7206_outl(unsigned int value, unsigned long port) -{ - maybebadio(port); -} - void se7206_insb(unsigned long port, void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); @@ -95,11 +86,6 @@ void se7206_insw(unsigned long port, void *addr, unsigned long count) *ap++ = *p; } -void se7206_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - void se7206_outsb(unsigned long port, const void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); @@ -116,8 +102,3 @@ void se7206_outsw(unsigned long port, const void *addr, unsigned long count) while (count--) *p = *ap++; } - -void se7206_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index a074b62..5b3ee08 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -6,14 +6,13 @@ * Copyright (C) 2007 Paul Mundt * * Hitachi 7206 SolutionEngine Support. - * */ - #include <linux/init.h> #include <linux/platform_device.h> #include <asm/se7206.h> #include <asm/io.h> #include <asm/machvec.h> +#include <asm/heartbeat.h> static struct resource smc91x_resources[] = { [0] = { @@ -37,10 +36,16 @@ static struct platform_device smc91x_device = { static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 32, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -49,7 +54,7 @@ static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, @@ -75,24 +80,18 @@ static struct sh_machine_vector mv_se __initmv = { .mv_nr_irqs = 256, .mv_inb = se7206_inb, .mv_inw = se7206_inw, - .mv_inl = se7206_inl, .mv_outb = se7206_outb, .mv_outw = se7206_outw, - .mv_outl = se7206_outl, .mv_inb_p = se7206_inb_p, .mv_inw_p = se7206_inw, - .mv_inl_p = se7206_inl, .mv_outb_p = se7206_outb_p, .mv_outw_p = se7206_outw, - .mv_outl_p = se7206_outl, .mv_insb = se7206_insb, .mv_insw = se7206_insw, - .mv_insl = se7206_insl, .mv_outsb = se7206_outsb, .mv_outsw = se7206_outsw, - .mv_outsl = se7206_outsl, .mv_init_irq = init_se7206_IRQ, }; diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 360153e..763f6de 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -99,8 +99,11 @@ shmse_irq_demux(int irq) * * We configure IRQ5 as a cascade IRQ. */ -static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", - NULL, NULL}; +static struct irqaction irq5 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "IRQ5-cascade", +}; static struct ipr_data se7343_irq5_ipr_map[] = { { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 8fec155..c9431b3 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -33,7 +33,7 @@ static struct platform_device smc91x_device = { static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + 8 - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 2962da1..d07a336 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -12,6 +12,7 @@ #include <asm/se.h> #include <asm/io.h> #include <asm/smc37c93x.h> +#include <asm/heartbeat.h> void init_se_IRQ(void); @@ -90,10 +91,15 @@ static struct platform_device cf_ide_device = { static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -102,7 +108,7 @@ static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index 495fc7e..03b6345 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -18,12 +18,10 @@ #include <asm/io.h> /* Heartbeat */ -static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; - static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -31,9 +29,6 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = heartbeat_bit_pos, - }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; @@ -109,7 +104,7 @@ static void __init se7722_setup(char **cmdline_p) ctrl_outl(0x00051001, MSTPCR0); ctrl_outl(0x00000000, MSTPCR1); /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC */ - ctrl_outl(0xffffbfC0, MSTPCR2); + ctrl_outl(0xffffbfC0, MSTPCR2); ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 7873d07..deefbfd 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -13,13 +13,19 @@ #include <asm/machvec.h> #include <asm/se7751.h> #include <asm/io.h> +#include <asm/heartbeat.h> static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -28,14 +34,13 @@ static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, .dev = { - .platform_data = heartbeat_bit_pos, + .platform_data = &heartbeat_data, }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; static struct platform_device *se7751_devices[] __initdata = { - &smc91x_device, &heartbeat_device, }; diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c index 8749147..6bd70da 100644 --- a/arch/sh/boards/se/7780/irq.c +++ b/arch/sh/boards/se/7780/irq.c @@ -16,32 +16,6 @@ #include <asm/io.h> #include <asm/se7780.h> -static struct intc2_data intc2_irq_table[] = { - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */ - { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */ - { 6, 0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */ - { 8, 0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */ - { 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */ - { 4, 0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */ - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */ - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */ - { 2, 0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */ - { 0 , 0, 24, 0, 24, 3 }, /* SM501 */ -}; - -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0, /* N/A */ - .msk_base = 0xffd00044, - .mskclr_base = 0xffd00064, - - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), - - .chip = { - .name = "INTC2-se7780", - }, -}; - /* * Initialize IRQ setting */ @@ -68,5 +42,5 @@ void __init init_se7780_IRQ(void) /* FPGA + 0x0A */ ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); - register_intc2_controller(&intc2_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ } diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c index 723f2fd..76e53b2 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/se/7780/setup.c @@ -16,12 +16,10 @@ #include <asm/io.h> /* Heartbeat */ -static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; - static struct resource heartbeat_resources[] = { [0] = { .start = PA_LED, - .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1, + .end = PA_LED, .flags = IORESOURCE_MEM, }, }; @@ -29,9 +27,6 @@ static struct resource heartbeat_resources[] = { static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, - .dev = { - .platform_data = heartbeat_bit_pos, - }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 9c031a8..934ac4f1 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -15,33 +15,9 @@ #include <asm/sh03/sh03.h> #include <asm/addrspace.h> -static struct ipr_data ipr_irq_table[] = { - { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, - { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, - { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, - { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, -}; - -static unsigned long ipr_offsets[] = { - INTC_IPRD, -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh03", - }, -}; - static void __init init_sh03_IRQ(void) { - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - register_ipr_controller(&ipr_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); } extern void *cf_io_base; @@ -68,7 +44,7 @@ static void __init sh03_setup(char **cmdline_p) static struct resource heartbeat_resources[] = { [0] = { .start = 0xa0800000, - .end = 0xa0800000 + 8 - 1, + .end = 0xa0800000, .flags = IORESOURCE_MEM, }, }; diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index dfd1245..16e5dae 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -14,36 +14,12 @@ #define PFC_PHCR 0xa400010eUL #define INTC_ICR1 0xa4000010UL -#define INTC_IPRC 0xa4000016UL - -static struct ipr_data ipr_irq_table[] = { - { 32, 0, 0, 0 }, - { 33, 0, 4, 0 }, - { 34, 0, 8, 8 }, - { 35, 0, 12, 0 }, -}; - -static unsigned long ipr_offsets[] = { - INTC_IPRC, -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-shmin", - }, -}; static void __init init_shmin_irq(void) { ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. - register_ipr_controller(&ipr_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); } static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 84271d8..2b594f6 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -68,37 +68,11 @@ module_init(eraseconfig_init); * IRL3 = crypto */ -static struct ipr_data ipr_irq_table[] = { - { IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY }, - { IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY }, - { IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY }, - { IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY }, -}; - -static unsigned long ipr_offsets[] = { - INTC_IPRD, -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-snapgear", - }, -}; - static void __init init_snapgear_IRQ(void) { - /* enable individual interrupt mode for externals */ - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - printk("Setup SnapGear IRQ/IPR ...\n"); - - register_ipr_controller(&ipr_irq_desc); + /* enable individual interrupt mode for externals */ + plat_irq_setup_pins(IRQ_MODE_IRQ); } /* diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index 606d25a..5de3b2a 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -12,38 +12,10 @@ #include <asm/titan.h> #include <asm/io.h> -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR idx, shift, prio */ - { TITAN_IRQ_WAN, 3, 12, 8 }, /* eth0 (WAN) */ - { TITAN_IRQ_LAN, 3, 8, 8 }, /* eth1 (LAN) */ - { TITAN_IRQ_MPCIA, 3, 4, 8 }, /* mPCI A (top) */ - { TITAN_IRQ_USB, 3, 0, 8 }, /* mPCI B (bottom), USB */ -}; - -static unsigned long ipr_offsets[] = { /* stolen from setup-sh7750.c */ - 0xffd00004UL, /* 0: IPRA */ - 0xffd00008UL, /* 1: IPRB */ - 0xffd0000cUL, /* 2: IPRC */ - 0xffd00010UL, /* 3: IPRD */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-titan", - }, -}; static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ - ipr_irq_enable_irlm(); - /* register ipr irqs */ - register_ipr_controller(&ipr_irq_desc); + plat_irq_setup_pins(IRQ_MODE_IRQ); } static struct sh_machine_vector mv_titan __initmv = { diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 2e516e9..7892361e 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig @@ -1,18 +1,5 @@ menu "Companion Chips" -config VOYAGERGX - bool "VoyagerGX chip support" - depends on SH_RTS7751R2D - help - Selecting this option will support Silicon Motion, Inc. SM501. - Designed to complement needs for the embedded industry, it - provides video and 2D capability. To reduce system cost a - wide variety of include I/O is supported, including analog RGB - and digital LCD Panel interface, 8-bit parallel interface, USB, - UART, IrDA, Zoom Video, AC97 or I2S, SSP, PWM, and I2C. There - are additional GPIO bits that can be used to interface to - external as well. - config HD6446X_SERIES bool diff --git a/arch/sh/cchips/hd6446x/hd64461.c b/arch/sh/cchips/hd6446x/hd64461.c index 97f6512..f1a4a07 100644 --- a/arch/sh/cchips/hd6446x/hd64461.c +++ b/arch/sh/cchips/hd6446x/hd64461.c @@ -14,6 +14,9 @@ #include <asm/irq.h> #include <asm/hd64461.h> +/* This belongs in cpu specific */ +#define INTC_ICR1 0xA4140010UL + static void disable_hd64461_irq(unsigned int irq) { unsigned short nimr; @@ -121,10 +124,15 @@ int hd64461_irq_demux(int irq) } } } - return __irq_demux(irq); + return irq; } -static struct irqaction irq0 = { hd64461_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64461", NULL, NULL }; +static struct irqaction irq0 = { + .handler = hd64461_interrupt, + .flags = IRQF_DISABLED, + .mask = CPU_MASK_NONE, + .name = "HD64461", +}; int __init setup_hd64461(void) { @@ -143,6 +151,7 @@ int __init setup_hd64461(void) #endif outw(0xffff, HD64461_NIMR); + /* IRQ 80 -> 95 belongs to HD64461 */ for (i = HD64461_IRQBASE; i < HD64461_IRQBASE + 16; i++) { irq_desc[i].chip = &hd64461_irq_type; } diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c index d126e1f..5cef0db 100644 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ b/arch/sh/cchips/hd6446x/hd64465/setup.c @@ -147,7 +147,12 @@ int hd64465_irq_demux(int irq) return irq; } -static struct irqaction irq0 = { hd64465_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "HD64465", NULL, NULL}; +static struct irqaction irq0 = { + .handler = hd64465_interrupt, + .flags = IRQF_DISABLED, + .mask = CPU_MASK_NONE, + .name = "HD64465", +}; static int __init setup_hd64465(void) diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index d70e5c8..ade3038 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -23,149 +23,79 @@ #include <asm/voyagergx.h> #include <asm/rts7751r2d.h> -static void disable_voyagergx_irq(unsigned int irq) -{ - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = readl((void __iomem *)VOYAGER_INT_MASK); - val &= ~mask; - writel(val, (void __iomem *)VOYAGER_INT_MASK); -} - -static void enable_voyagergx_irq(unsigned int irq) -{ - unsigned long val; - unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - - pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); - val = readl((void __iomem *)VOYAGER_INT_MASK); - val |= mask; - writel(val, (void __iomem *)VOYAGER_INT_MASK); -} - -static void mask_and_ack_voyagergx(unsigned int irq) -{ - disable_voyagergx_irq(irq); -} - -static void end_voyagergx_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_voyagergx_irq(irq); -} - -static unsigned int startup_voyagergx_irq(unsigned int irq) -{ - enable_voyagergx_irq(irq); - return 0; -} - -static void shutdown_voyagergx_irq(unsigned int irq) -{ - disable_voyagergx_irq(irq); -} - -static struct hw_interrupt_type voyagergx_irq_type = { - .typename = "VOYAGERGX-IRQ", - .startup = startup_voyagergx_irq, - .shutdown = shutdown_voyagergx_irq, - .enable = enable_voyagergx_irq, - .disable = disable_voyagergx_irq, - .ack = mask_and_ack_voyagergx, - .end = end_voyagergx_irq, +enum { + UNUSED = 0, + + /* voyager specific interrupt sources */ + UP, G54, G53, G52, G51, G50, G49, G48, + I2C, PW, DMA, PCI, I2S, AC, US, + U1, U0, CV, MC, S1, S0, + UH, TWOD, ZD, PV, CI, }; -static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) -{ - printk(KERN_INFO - "VoyagerGX: spurious interrupt, status: 0x%x\n", - (unsigned int)readl((void __iomem *)INT_STATUS)); - return IRQ_HANDLED; -} - -static struct { - int (*func)(int, void *); - void *dev; -} voyagergx_demux[VOYAGER_IRQ_NUM]; +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(UP, IRQ_SM501_UP), INTC_IRQ(G54, IRQ_SM501_G54), + INTC_IRQ(G53, IRQ_SM501_G53), INTC_IRQ(G52, IRQ_SM501_G52), + INTC_IRQ(G51, IRQ_SM501_G51), INTC_IRQ(G50, IRQ_SM501_G50), + INTC_IRQ(G49, IRQ_SM501_G49), INTC_IRQ(G48, IRQ_SM501_G48), + INTC_IRQ(I2C, IRQ_SM501_I2C), INTC_IRQ(PW, IRQ_SM501_PW), + INTC_IRQ(DMA, IRQ_SM501_DMA), INTC_IRQ(PCI, IRQ_SM501_PCI), + INTC_IRQ(I2S, IRQ_SM501_I2S), INTC_IRQ(AC, IRQ_SM501_AC), + INTC_IRQ(US, IRQ_SM501_US), INTC_IRQ(U1, IRQ_SM501_U1), + INTC_IRQ(U0, IRQ_SM501_U0), INTC_IRQ(CV, IRQ_SM501_CV), + INTC_IRQ(MC, IRQ_SM501_MC), INTC_IRQ(S1, IRQ_SM501_S1), + INTC_IRQ(S0, IRQ_SM501_S0), INTC_IRQ(UH, IRQ_SM501_UH), + INTC_IRQ(TWOD, IRQ_SM501_2D), INTC_IRQ(ZD, IRQ_SM501_ZD), + INTC_IRQ(PV, IRQ_SM501_PV), INTC_IRQ(CI, IRQ_SM501_CI), +}; -void voyagergx_register_irq_demux(int irq, - int (*demux)(int irq, void *dev), void *dev) -{ - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux; - voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev; -} +static struct intc_mask_reg mask_registers[] __initdata = { + { VOYAGER_INT_MASK, 0, 32, /* "Interrupt Mask", MMIO_base + 0x30 */ + { UP, G54, G53, G52, G51, G50, G49, G48, + I2C, PW, 0, DMA, PCI, I2S, AC, US, + 0, 0, U1, U0, CV, MC, S1, S0, + 0, UH, 0, 0, TWOD, ZD, PV, CI } }, +}; -void voyagergx_unregister_irq_demux(int irq) -{ - voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0; -} +static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors, + NULL, NULL, mask_registers, NULL, NULL); + +static unsigned int voyagergx_stat2irq[32] = { + IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D, + 0, 0, IRQ_SM501_UH, 0, + IRQ_SM501_S0, IRQ_SM501_S1, IRQ_SM501_MC, IRQ_SM501_CV, + IRQ_SM501_U0, IRQ_SM501_U1, 0, 0, + IRQ_SM501_US, IRQ_SM501_AC, IRQ_SM501_I2S, IRQ_SM501_PCI, + IRQ_SM501_DMA, 0, IRQ_SM501_PW, IRQ_SM501_I2C, + IRQ_SM501_G48, IRQ_SM501_G49, IRQ_SM501_G50, IRQ_SM501_G51, + IRQ_SM501_G52, IRQ_SM501_G53, IRQ_SM501_G54, IRQ_SM501_UP +}; -int voyagergx_irq_demux(int irq) +static void voyagergx_irq_demux(unsigned int irq, struct irq_desc *desc) { - - if (irq == IRQ_VOYAGER ) { - unsigned long i = 0, bit __attribute__ ((unused)); - unsigned long val = readl((void __iomem *)INT_STATUS); - - if (val & (1 << 1)) - i = 1; - else if (val & (1 << 2)) - i = 2; - else if (val & (1 << 6)) - i = 6; - else if (val & (1 << 10)) - i = 10; - else if (val & (1 << 11)) - i = 11; - else if (val & (1 << 12)) - i = 12; - else if (val & (1 << 17)) - i = 17; - else - printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); - pr_debug("voyagergx_irq_demux %ld \n", i); - if (i < VOYAGER_IRQ_NUM) { - irq = VOYAGER_IRQ_BASE + i; - if (voyagergx_demux[i].func != 0) - irq = voyagergx_demux[i].func(irq, - voyagergx_demux[i].dev); + unsigned long intv = ctrl_inl(INT_STATUS); + struct irq_desc *ext_desc; + unsigned int ext_irq; + unsigned int k = 0; + + while (intv) { + ext_irq = voyagergx_stat2irq[k]; + if (ext_irq && (intv & 1)) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); } + intv >>= 1; + k++; } - return irq; } -static struct irqaction irq0 = { - .name = "voyagergx", - .handler = voyagergx_interrupt, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, -}; - void __init setup_voyagergx_irq(void) { - int i, flag; - - printk(KERN_INFO "VoyagerGX configured at 0x%x on irq %d(mapped into %d to %d)\n", - VOYAGER_BASE, + printk(KERN_INFO "VoyagerGX on irq %d (mapped into %d to %d)\n", IRQ_VOYAGER, VOYAGER_IRQ_BASE, VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1); - for (i=0; i<VOYAGER_IRQ_NUM; i++) { - flag = 0; - switch (VOYAGER_IRQ_BASE + i) { - case VOYAGER_USBH_IRQ: - case VOYAGER_8051_IRQ: - case VOYAGER_UART0_IRQ: - case VOYAGER_UART1_IRQ: - case VOYAGER_AC97_IRQ: - flag = 1; - } - if (flag == 1) - irq_desc[VOYAGER_IRQ_BASE + i].chip = &voyagergx_irq_type; - } - - setup_irq(IRQ_VOYAGER, &irq0); + register_intc_controller(&intc_desc); + set_irq_chained_handler(IRQ_VOYAGER, voyagergx_irq_demux); } diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 3fdd270..5772878 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Sat Jul 7 03:47:45 2007 +# Linux kernel version: 2.6.23-rc7 +# Fri Sep 21 15:46:27 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -18,30 +18,26 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 @@ -64,7 +60,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -74,24 +69,17 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -112,7 +100,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -120,6 +107,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -134,7 +122,6 @@ CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -177,7 +164,9 @@ CONFIG_NR_QUICK=2 # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -185,12 +174,11 @@ CONFIG_NR_QUICK=2 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # # Board support @@ -270,6 +258,7 @@ CONFIG_CMDLINE="console=ttySC1,115200 panic=3" # # Bus options # +CONFIG_MAPLE=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y @@ -368,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -380,27 +370,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -411,14 +384,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set -# CONFIG_BLINK is not set # CONFIG_IDE is not set # @@ -426,12 +396,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -444,26 +411,16 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set @@ -472,10 +429,6 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -520,15 +473,7 @@ CONFIG_8139TOO=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -536,6 +481,7 @@ CONFIG_8139TOO=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -606,10 +552,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -631,10 +573,6 @@ CONFIG_HW_RANDOM=y # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set @@ -644,11 +582,8 @@ CONFIG_DEVPORT=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -673,6 +608,7 @@ CONFIG_DEVPORT=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set @@ -699,7 +635,6 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_PVR2=y -# CONFIG_FB_EPSON1355 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set @@ -725,6 +660,7 @@ CONFIG_FB_PVR2=y # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y @@ -749,16 +685,10 @@ CONFIG_LOGO_SUPERH_CLUT224=y # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -773,32 +703,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -815,6 +721,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -890,7 +801,6 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -935,10 +845,6 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -949,6 +855,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index b931d9b..756d38d 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,37 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:10:06 2006 +# Linux kernel version: 2.6.23-rc4 +# Tue Sep 11 19:42:44 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y # CONFIG_SYSVIPC is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set -# CONFIG_IKCONFIG is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_USER_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y @@ -44,27 +54,25 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -82,55 +90,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -CONFIG_SH_HP6XX=y -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -139,66 +109,78 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_START=0x0d000000 CONFIG_MEMORY_SIZE=0x00400000 CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set CONFIG_SH_ADC=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_PINT_IRQ=y CONFIG_CPU_HAS_SR_RB=y # -# Timer support +# Board support +# +# CONFIG_SH_SOLUTION_ENGINE is not set +CONFIG_SH_HP6XX=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=22110000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set # # CPU Frequency scaling @@ -208,6 +190,7 @@ CONFIG_SH_PCLK_FREQ=22110000 # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -223,14 +206,21 @@ CONFIG_HD64461_IOBASE=0xb0000000 CONFIG_HD64461_ENABLER=y # +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -240,14 +230,13 @@ CONFIG_PREEMPT_NONE=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # CONFIG_ISA=y -# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -266,14 +255,9 @@ CONFIG_PCMCIA_IOCTL=y CONFIG_PCMCIA_PROBE=y # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # @@ -282,8 +266,9 @@ CONFIG_BINFMT_ELF=y CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_APM=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_APM_EMULATION=y # # Networking @@ -301,109 +286,76 @@ CONFIG_APM=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# # CONFIG_PNP is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_WINBOND_VLB is not set +CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -411,19 +363,17 @@ CONFIG_IDE_GENERIC=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_TSDEV=y CONFIG_INPUT_TSDEV_SCREEN_X=240 CONFIG_INPUT_TSDEV_SCREEN_Y=320 -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -436,9 +386,12 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_HP6XX=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set @@ -447,6 +400,7 @@ CONFIG_TOUCHSCREEN_HP600=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_INPUT_MISC is not set # @@ -476,46 +430,29 @@ CONFIG_HW_CONSOLE=y # # Non-8250 serial port support # -# CONFIG_SERIAL_SH_SCI is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -523,48 +460,55 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set # -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_HP680=y # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set CONFIG_FB_HIT=y # CONFIG_FB_VIRTUAL is not set @@ -575,6 +519,7 @@ CONFIG_FB_HIT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -587,79 +532,49 @@ CONFIG_FONT_PEARL_8x8=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=y -# CONFIG_OSS_OBSOLETE_DRIVER is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_SH_DAC_AUDIO=y -CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL=1 - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# LED drivers -# - -# -# LED Triggers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# InfiniBand support +# SPI RTC drivers # # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Real Time Clock +# on-CPU RTC drivers # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_DRV_SH=y # # DMA Engine support @@ -675,16 +590,23 @@ CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL=1 # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -705,7 +627,7 @@ CONFIG_DNOTIFY=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -755,7 +677,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -799,34 +721,73 @@ CONFIG_NLS_DEFAULT="iso8859-1" # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_KGDB is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_HW is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig new file mode 100644 index 0000000..f8398a5 --- /dev/null +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -0,0 +1,925 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2 +# Fri Aug 17 12:15:16 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +CONFIG_AUDIT=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_SYSFS_DEPRECATED=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" + +# +# System type +# +CONFIG_CPU_SH3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +CONFIG_CPU_SUBTYPE_SH7720=y +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0C000000 +CONFIG_MEMORY_SIZE=0x03F00000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU_EMU is not set +CONFIG_SH_DSP=y +CONFIG_SH_ADC=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC_IRQ=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SH_MAGIC_PANEL_R2=y + +# +# Magic Panel R2 options +# +CONFIG_SH_MAGIC_PANEL_R2_VERSION=3 + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=24000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +CONFIG_SH_DMA_API=y +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=6 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_SOLUTIONENGINE is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_WRITEBUFFER is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_BIND34=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_DEBUG_KOBJECT=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +CONFIG_SH_KGDB=y + +# +# KGDB configuration options +# +# CONFIG_MORE_COMPILE_OPTIONS is not set +# CONFIG_KGDB_NMI is not set +CONFIG_KGDB_SYSRQ=y + +# +# Serial port setup +# +CONFIG_KGDB_DEFPORT=0 +CONFIG_KGDB_DEFBAUD=115200 +CONFIG_KGDB_DEFPARITY_N=y +# CONFIG_KGDB_DEFPARITY_E is not set +# CONFIG_KGDB_DEFPARITY_O is not set +CONFIG_KGDB_DEFBITS_8=y +# CONFIG_KGDB_DEFBITS_7 is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/rts7751r2d_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index b64f73b..2dc754e 100644 --- a/arch/sh/configs/rts7751r2d_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,46 +1,47 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc1 -# Thu Mar 1 16:42:40 2007 +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 14 18:04:44 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -54,31 +55,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -96,61 +95,16 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -CONFIG_SH_RTS7751R2D=y -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -159,35 +113,30 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# # CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -197,17 +146,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -215,7 +166,6 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_INTC_IRQ=y @@ -223,17 +173,31 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y # -# Timer support +# Board support # -CONFIG_SH_TMU=y +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +CONFIG_SH_RTS7751R2D=y +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set # # RTS7751R2D options # -CONFIG_RTS7751R2D_REV11=y +# CONFIG_RTS7751R2D_PLUS is not set +CONFIG_RTS7751R2D_1=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set # # CPU Frequency scaling @@ -244,19 +208,15 @@ CONFIG_SH_PCLK_FREQ=60000000 # DMA support # # CONFIG_SH_DMA is not set -# CONFIG_NR_ONCHIP_DMA_CHANNELS is not set -# CONFIG_NR_DMA_CHANNELS_BOOL is not set # # Companion Chips # -CONFIG_VOYAGERGX=y -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y # # Additional SuperH Device Drivers # +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # @@ -268,7 +228,7 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -289,15 +249,12 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_CPCI is not set @@ -307,15 +264,9 @@ CONFIG_HOTPLUG_PCI=y # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -323,7 +274,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -360,20 +310,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -399,8 +337,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -413,31 +360,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -449,19 +375,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -469,6 +389,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -490,6 +411,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -497,12 +419,8 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -512,7 +430,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -535,10 +452,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -561,6 +474,7 @@ CONFIG_ATA=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -593,10 +507,6 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -610,35 +520,18 @@ CONFIG_PATA_PLATFORM=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set @@ -647,10 +540,6 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -677,10 +566,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set @@ -691,61 +577,26 @@ CONFIG_8139TOO=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -756,15 +607,7 @@ CONFIG_NET_WIRELESS=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -772,6 +615,7 @@ CONFIG_NET_WIRELESS=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -788,6 +632,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -828,32 +673,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -861,21 +689,24 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -887,22 +718,31 @@ CONFIG_MFD_SM501=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -910,14 +750,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TILEBLITTING is not set # -# Frambuffer hardware drivers +# Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set -# CONFIG_FB_EPSON1355 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set @@ -932,7 +771,10 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set @@ -941,14 +783,11 @@ CONFIG_FB_SM501=y # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set @@ -1048,35 +887,34 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m +CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y # CONFIG_SND_AC97_POWER_SAVE is not set # -# SoC audio support +# SUPERH devices +# + +# +# System on Chip audio support # # CONFIG_SND_SOC is not set # +# SoC Audio support for SuperH +# + +# # Open Sound System # CONFIG_SOUND_PRIME=m -# CONFIG_OBSOLETE_OSS is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ICH is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set CONFIG_AC97_BUS=m - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -1090,37 +928,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1134,18 +944,28 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# # -# RTC drivers +# Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -1159,12 +979,9 @@ CONFIG_RTC_DRV_SH=y # # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -1247,7 +1064,6 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1321,7 +1137,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1334,10 +1149,6 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -1346,8 +1157,11 @@ CONFIG_EARLY_PRINTK=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig new file mode 100644 index 0000000..4ff5a75 --- /dev/null +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -0,0 +1,1167 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2 +# Tue Aug 14 16:33:08 2007 +# +CONFIG_SUPERH=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System type +# +CONFIG_CPU_SH4=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +CONFIG_CPU_SUBTYPE_SH7751R=y +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_ST40STB1 is not set +# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_INTC_IRQ=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_HS7751RVOIP is not set +CONFIG_SH_RTS7751R2D=y +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# RTS7751R2D options +# +CONFIG_RTS7751R2D_PLUS=y +# CONFIG_RTS7751R2D_1 is not set + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00010000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_UBC_WAKEUP is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial" + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_PLATFORM=y +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=1 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +CONFIG_LOGO_SUPERH_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +CONFIG_SND_YMFPCI=m +CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y +# CONFIG_SND_AC97_POWER_SAVE is not set + +# +# SUPERH devices +# + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# SoC Audio support for SuperH +# + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=m +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index f2f2a3c..0d0cda90 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Fri Jun 15 19:37:46 2007 +# Linux kernel version: 2.6.23-rc4 +# Thu Sep 13 16:40:16 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -17,25 +17,22 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 @@ -60,23 +57,17 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -98,7 +89,6 @@ CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set CONFIG_CPU_SUBTYPE_SH7206=y -# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -106,6 +96,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -119,7 +110,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -136,15 +127,16 @@ CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set @@ -155,7 +147,9 @@ CONFIG_NR_QUICK=2 # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -163,8 +157,6 @@ CONFIG_NR_QUICK=2 # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set -CONFIG_CPU_HAS_IPR_IRQ=y # # Board support @@ -185,12 +177,23 @@ CONFIG_SH_CLK_MD=6 # # CPU Frequency scaling # -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_SH_CPU_FREQ is not set # # DMA support # -# CONFIG_SH_DMA is not set # # Companion Chips @@ -199,17 +202,17 @@ CONFIG_SH_CLK_MD=6 # # Additional SuperH Device Drivers # -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # # Kernel features # -CONFIG_HZ_100=y +# CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y @@ -221,11 +224,13 @@ CONFIG_PREEMPT_NONE=y # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_CMDLINE_BOOL is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel" # # Bus options # +# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -315,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -325,11 +331,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -411,31 +415,16 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -443,27 +432,18 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_STNIC is not set @@ -483,15 +463,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -499,6 +471,7 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -546,19 +519,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -567,11 +532,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -596,25 +558,21 @@ CONFIG_DAB=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -625,31 +583,7 @@ CONFIG_HID=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -666,6 +600,11 @@ CONFIG_HID=y # # +# Userspace I/O +# +# CONFIG_UIO is not set + +# # File systems # # CONFIG_EXT2_FS is not set @@ -736,7 +675,6 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -752,12 +690,12 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -# CONFIG_DLM is not set # # Profiling support # -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +# CONFIG_OPROFILE is not set # # Kernel hacking @@ -768,19 +706,41 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_FAULT_INJECTION is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800 +CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_BOOTMEM is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_4KSTACKS is not set # # Security options # # CONFIG_KEYS is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -791,6 +751,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index 219bad5..a794c08 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Wed Jun 20 14:09:27 2007 +# Linux kernel version: 2.6.23-rc7 +# Fri Sep 21 19:07:30 2007 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -13,32 +13,33 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_UTS_NS is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -63,34 +64,26 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +# CONFIG_SLAB is not set # CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_SLOB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -113,7 +106,6 @@ CONFIG_CPU_SH4A=y CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -121,6 +113,7 @@ CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -135,7 +128,6 @@ CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set CONFIG_CPU_SUBTYPE_SHX3=y -# CONFIG_CPU_SUBTYPE_SH73180 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set @@ -148,12 +140,15 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_MAX_ACTIVE_REGIONS=6 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -163,12 +158,14 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -178,24 +175,25 @@ CONFIG_NR_QUICK=2 # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +# CONFIG_CACHE_WRITEBACK is not set +# CONFIG_CACHE_WRITETHROUGH is not set +CONFIG_CACHE_OFF=y # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_SH_FPU is not set -# CONFIG_SH_FPU_EMU is not set -CONFIG_SH_DSP=y +CONFIG_SH_FPU=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC2_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y # # Board support # +CONFIG_SH_X3PROTO=y # # Timer and clock configuration @@ -204,13 +202,25 @@ CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=50000000 CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y +# CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # # CPU Frequency scaling # -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -237,6 +247,7 @@ CONFIG_HZ_250=y CONFIG_HZ=250 CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -249,7 +260,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/nfs nfsroot=192.168.1.1:/exports/devel/rfs/mobiler noaliencache earlyprintk=bios ignore_loglevel" +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel" # # Bus options @@ -265,12 +276,106 @@ CONFIG_CMDLINE="console=ttySC0,115200 ip=192.168.1.2:::255.255.255.0 root=/dev/n # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking # -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -285,37 +390,21 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -323,6 +412,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -351,73 +441,54 @@ CONFIG_SCSI_WAIT_SCAN=m # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# ISDN subsystem -# - -# -# Telephony Support -# +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # @@ -442,19 +513,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# IPMI +# Watchdog Device Drivers # -# CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SH_WDT is not set +# CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -463,11 +533,8 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # @@ -479,6 +546,7 @@ CONFIG_HW_RANDOM=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set # CONFIG_DAB is not set # @@ -491,24 +559,18 @@ CONFIG_HW_RANDOM=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -517,68 +579,32 @@ CONFIG_HW_RANDOM=y # # USB Gadget Support # -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_CLASS is not set # # DMA Engine support @@ -594,6 +620,11 @@ CONFIG_RTC_DRV_SH=y # # +# Userspace I/O +# +CONFIG_UIO=m + +# # File systems # CONFIG_EXT2_FS=y @@ -612,6 +643,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -667,6 +699,17 @@ CONFIG_RAMFS=y # CONFIG_UFS_FS is not set # +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# # Partition Types # # CONFIG_PARTITION_ADVANCED is not set @@ -678,6 +721,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Profiling support # CONFIG_PROFILING=y @@ -687,31 +735,28 @@ CONFIG_PROFILING=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SLAB_LEAK=y CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_LOCK_ALLOC=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set -CONFIG_LOCKDEP=y -CONFIG_DEBUG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -735,10 +780,6 @@ CONFIG_DEBUG_STACK_USAGE=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # @@ -749,6 +790,7 @@ CONFIG_BITREVERSE=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index ee71143..4e711a0 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -12,6 +12,7 @@ config SH_DMA config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA + default "6" if CPU_SUBTYPE_SH7720 default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R default "12" if CPU_SUBTYPE_SH7780 default "4" diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 06ed060..958bac1 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -24,13 +24,19 @@ static int dmte_irq_map[] = { DMTE1_IRQ, DMTE2_IRQ, DMTE3_IRQ, -#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) DMTE4_IRQ, DMTE5_IRQ, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) DMTE6_IRQ, - DMTE7_IRQ, + DMTE7_IRQ, #endif }; @@ -196,7 +202,8 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan) return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan); } -#ifdef CONFIG_CPU_SUBTYPE_SH7780 +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) #define dmaor_read_reg() ctrl_inw(DMAOR) #define dmaor_write_reg(data) ctrl_outw(data, DMAOR) #else diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index 10c1828..b76a14f 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -24,24 +24,44 @@ #include <linux/sched.h> #include <linux/timer.h> #include <linux/io.h> +#include <asm/heartbeat.h> #define DRV_NAME "heartbeat" -#define DRV_VERSION "0.1.0" +#define DRV_VERSION "0.1.1" -struct heartbeat_data { - void __iomem *base; - unsigned char bit_pos[8]; - struct timer_list timer; -}; +static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; + +static inline void heartbeat_toggle_bit(struct heartbeat_data *hd, + unsigned bit, unsigned int inverted) +{ + unsigned int new; + + new = (1 << hd->bit_pos[bit]); + if (inverted) + new = ~new; + + switch (hd->regsize) { + case 32: + iowrite32(new, hd->base); + break; + case 16: + iowrite16(new, hd->base); + break; + default: + iowrite8(new, hd->base); + break; + } +} static void heartbeat_timer(unsigned long data) { struct heartbeat_data *hd = (struct heartbeat_data *)data; static unsigned bit = 0, up = 1; - ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base); + heartbeat_toggle_bit(hd, bit, hd->flags & HEARTBEAT_INVERTED); + bit += up; - if ((bit == 0) || (bit == ARRAY_SIZE(hd->bit_pos)-1)) + if ((bit == 0) || (bit == (hd->nr_bits)-1)) up = -up; mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) / @@ -64,21 +84,31 @@ static int heartbeat_drv_probe(struct platform_device *pdev) return -EINVAL; } - hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL); - if (unlikely(!hd)) - return -ENOMEM; - if (pdev->dev.platform_data) { - memcpy(hd->bit_pos, pdev->dev.platform_data, - ARRAY_SIZE(hd->bit_pos)); + hd = pdev->dev.platform_data; } else { - int i; + hd = kzalloc(sizeof(struct heartbeat_data), GFP_KERNEL); + if (unlikely(!hd)) + return -ENOMEM; + } + + hd->base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!unlikely(hd->base)) { + dev_err(&pdev->dev, "ioremap failed\n"); + + if (!pdev->dev.platform_data) + kfree(hd); + + return -ENXIO; + } - for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++) - hd->bit_pos[i] = i; + if (!hd->nr_bits) { + hd->bit_pos = default_bit_pos; + hd->nr_bits = ARRAY_SIZE(default_bit_pos); } - hd->base = (void __iomem *)(unsigned long)res->start; + if (!hd->regsize) + hd->regsize = 8; /* default access size */ setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd); platform_set_drvdata(pdev, hd); @@ -91,10 +121,12 @@ static int heartbeat_drv_remove(struct platform_device *pdev) struct heartbeat_data *hd = platform_get_drvdata(pdev); del_timer_sync(&hd->timer); + iounmap(hd->base); platform_set_drvdata(pdev, NULL); - kfree(hd); + if (!pdev->dev.platform_data) + kfree(hd); return 0; } diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 4a518d9..ec8430c 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -19,10 +19,10 @@ #include "pci-sh4.h" static u8 rts7751r2d_irq_tab[] __initdata = { - IRQ_PCISLOT1, - IRQ_PCISLOT2, - IRQ_PCMCIA, - IRQ_PCIETH, + IRQ_PCI_INTA, + IRQ_PCI_INTB, + IRQ_PCI_INTC, + IRQ_PCI_INTD, }; int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 5508e45..e516087 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -79,19 +79,6 @@ static int __init sh7780_pci_init(void) ctrl_outl(0xAAAA0000, INTC_ICR1); /* INTPRI: priority=3(all) */ ctrl_outl(0x33333333, INTC_INTPRI); - } else { - /* INTC SH-4 Mode */ - ctrl_outl(0x00200000, INTC_ICR0); - /* enable PCIINTA - PCIINTD */ - ctrl_outl(0x00078000, INTC_INT2MSKCR); - /* disable IRL4-7 Interrupt */ - ctrl_outl(0x40000000, INTC_INTMSK1); - /* disable IRL4-7 Interrupt */ - ctrl_outl(0x0000fffe, INTC_INTMSK2); - /* enable IRL0-3 Interrupt */ - ctrl_outl(0x80000000, INTC_INTMSKCLR1); - /* enable IRL0-3 Interrupt */ - ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); } if ((ret = sh4_pci_check_direct()) != 0) diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 92807ffa..b5f1e23 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -83,6 +83,8 @@ static void propagate_rate(struct clk *clk) continue; if (likely(clkp->ops && clkp->ops->recalc)) clkp->ops->recalc(clkp); + if (unlikely(clkp->flags & CLK_RATE_PROPAGATES)) + propagate_rate(clkp); } } diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 9172e97..c217c4b 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -22,6 +22,7 @@ #include <asm/cache.h> #include <asm/io.h> #include <asm/ubc.h> +#include <asm/smp.h> /* * Generic wrapper for command line arguments to disable on-chip @@ -143,12 +144,15 @@ static void __init cache_init(void) flags &= ~CCR_CACHE_EMODE; #endif -#ifdef CONFIG_SH_WRITETHROUGH - /* Turn on Write-through caching */ +#if defined(CONFIG_CACHE_WRITETHROUGH) + /* Write-through */ flags |= CCR_CACHE_WT; -#else - /* .. or default to Write-back */ +#elif defined(CONFIG_CACHE_WRITEBACK) + /* Write-back */ flags |= CCR_CACHE_CB; +#else + /* Off */ + flags &= ~CCR_CACHE_ENABLE; #endif ctrl_outl(flags, CCR); @@ -213,8 +217,11 @@ static void __init dsp_init(void) * Each processor family is still responsible for doing its own probing * and cache configuration in detect_cpu_and_cache_system(). */ -asmlinkage void __init sh_cpu_init(void) + +asmlinkage void __cpuinit sh_cpu_init(void) { + current_thread_info()->cpu = hard_smp_processor_id(); + /* First, probe the CPU */ detect_cpu_and_cache_system(); @@ -224,9 +231,10 @@ asmlinkage void __init sh_cpu_init(void) /* Init the cache */ cache_init(); - shm_align_mask = max_t(unsigned long, - current_cpu_data.dcache.way_size - 1, - PAGE_SIZE - 1); + if (raw_smp_processor_id() == 0) + shm_align_mask = max_t(unsigned long, + current_cpu_data.dcache.way_size - 1, + PAGE_SIZE - 1); /* Disable the FPU */ if (fpu_disabled) { @@ -265,6 +273,7 @@ asmlinkage void __init sh_cpu_init(void) * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So .. * we wake it up and hope that all is well. */ - ubc_wakeup(); + if (raw_smp_processor_id() == 0) + ubc_wakeup(); speculative_execution_init(); } diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 60bfc05..8da8e17 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -1,9 +1,7 @@ # # Makefile for the Linux/SuperH CPU-specifc IRQ handlers. # -obj-y += imask.o +obj-y += imask.o intc.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o -obj-$(CONFIG_CPU_HAS_INTC_IRQ) += intc.o -obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index 9345a71..6ac018c 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -20,145 +20,258 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/interrupt.h> +#include <linux/bootmem.h> + +#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \ + ((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \ + ((addr_e) << 16) | ((addr_d << 24))) + +#define _INTC_SHIFT(h) (h & 0x1f) +#define _INTC_WIDTH(h) ((h >> 5) & 0xf) +#define _INTC_FN(h) ((h >> 9) & 0xf) +#define _INTC_MODE(h) ((h >> 13) & 0x7) +#define _INTC_ADDR_E(h) ((h >> 16) & 0xff) +#define _INTC_ADDR_D(h) ((h >> 24) & 0xff) + +struct intc_handle_int { + unsigned int irq; + unsigned long handle; +}; + +struct intc_desc_int { + unsigned long *reg; +#ifdef CONFIG_SMP + unsigned long *smp; +#endif + unsigned int nr_reg; + struct intc_handle_int *prio; + unsigned int nr_prio; + struct intc_handle_int *sense; + unsigned int nr_sense; + struct irq_chip chip; +}; -#define _INTC_MK(fn, idx, bit, value) \ - ((fn) << 24 | ((value) << 16) | ((idx) << 8) | (bit)) -#define _INTC_FN(h) (h >> 24) -#define _INTC_VALUE(h) ((h >> 16) & 0xff) -#define _INTC_IDX(h) ((h >> 8) & 0xff) -#define _INTC_BIT(h) (h & 0xff) +#ifdef CONFIG_SMP +#define IS_SMP(x) x.smp +#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c)) +#define SMP_NR(d, x) ((d->smp[(x)] >> 8) ? (d->smp[(x)] >> 8) : 1) +#else +#define IS_SMP(x) 0 +#define INTC_REG(d, x, c) (d->reg[(x)]) +#define SMP_NR(d, x) 1 +#endif -#define _INTC_PTR(desc, member, data) \ - (desc->member + _INTC_IDX(data)) +static unsigned int intc_prio_level[NR_IRQS]; /* for now */ -static inline struct intc_desc *get_intc_desc(unsigned int irq) +static inline struct intc_desc_int *get_intc_desc(unsigned int irq) { struct irq_chip *chip = get_irq_chip(irq); - return (void *)((char *)chip - offsetof(struct intc_desc, chip)); + return (void *)((char *)chip - offsetof(struct intc_desc_int, chip)); } static inline unsigned int set_field(unsigned int value, unsigned int field_value, - unsigned int width, - unsigned int shift) + unsigned int handle) { + unsigned int width = _INTC_WIDTH(handle); + unsigned int shift = _INTC_SHIFT(handle); + value &= ~(((1 << width) - 1) << shift); value |= field_value << shift; return value; } -static inline unsigned int set_prio_field(struct intc_desc *desc, - unsigned int value, - unsigned int priority, - unsigned int data) +static void write_8(unsigned long addr, unsigned long h, unsigned long data) { - unsigned int width = _INTC_PTR(desc, prio_regs, data)->field_width; - - return set_field(value, priority, width, _INTC_BIT(data)); + ctrl_outb(set_field(0, data, h), addr); } -static void disable_prio_16(struct intc_desc *desc, unsigned int data) +static void write_16(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - - ctrl_outw(set_prio_field(desc, ctrl_inw(addr), 0, data), addr); + ctrl_outw(set_field(0, data, h), addr); } -static void enable_prio_16(struct intc_desc *desc, unsigned int data) +static void write_32(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - unsigned int prio = _INTC_VALUE(data); - - ctrl_outw(set_prio_field(desc, ctrl_inw(addr), prio, data), addr); + ctrl_outl(set_field(0, data, h), addr); } -static void disable_prio_32(struct intc_desc *desc, unsigned int data) +static void modify_8(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - - ctrl_outl(set_prio_field(desc, ctrl_inl(addr), 0, data), addr); + ctrl_outb(set_field(ctrl_inb(addr), data, h), addr); } -static void enable_prio_32(struct intc_desc *desc, unsigned int data) +static void modify_16(unsigned long addr, unsigned long h, unsigned long data) { - unsigned long addr = _INTC_PTR(desc, prio_regs, data)->reg; - unsigned int prio = _INTC_VALUE(data); - - ctrl_outl(set_prio_field(desc, ctrl_inl(addr), prio, data), addr); + ctrl_outw(set_field(ctrl_inw(addr), data, h), addr); } -static void disable_mask_8(struct intc_desc *desc, unsigned int data) +static void modify_32(unsigned long addr, unsigned long h, unsigned long data) { - ctrl_outb(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->set_reg); + ctrl_outl(set_field(ctrl_inl(addr), data, h), addr); } -static void enable_mask_8(struct intc_desc *desc, unsigned int data) +enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 }; + +static void (*intc_reg_fns[])(unsigned long addr, + unsigned long h, + unsigned long data) = { + [REG_FN_WRITE_BASE + 0] = write_8, + [REG_FN_WRITE_BASE + 1] = write_16, + [REG_FN_WRITE_BASE + 3] = write_32, + [REG_FN_MODIFY_BASE + 0] = modify_8, + [REG_FN_MODIFY_BASE + 1] = modify_16, + [REG_FN_MODIFY_BASE + 3] = modify_32, +}; + +enum { MODE_ENABLE_REG = 0, /* Bit(s) set -> interrupt enabled */ + MODE_MASK_REG, /* Bit(s) set -> interrupt disabled */ + MODE_DUAL_REG, /* Two registers, set bit to enable / disable */ + MODE_PRIO_REG, /* Priority value written to enable interrupt */ + MODE_PCLR_REG, /* Above plus all bits set to disable interrupt */ +}; + +static void intc_mode_field(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) { - ctrl_outb(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->clr_reg); + fn(addr, handle, ((1 << _INTC_WIDTH(handle)) - 1)); } -static void disable_mask_32(struct intc_desc *desc, unsigned int data) +static void intc_mode_zero(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) { - ctrl_outl(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->set_reg); + fn(addr, handle, 0); } -static void enable_mask_32(struct intc_desc *desc, unsigned int data) +static void intc_mode_prio(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) { - ctrl_outl(1 << _INTC_BIT(data), - _INTC_PTR(desc, mask_regs, data)->clr_reg); + fn(addr, handle, intc_prio_level[irq]); } -enum { REG_FN_ERROR=0, - REG_FN_MASK_8, REG_FN_MASK_32, - REG_FN_PRIO_16, REG_FN_PRIO_32 }; - -static struct { - void (*enable)(struct intc_desc *, unsigned int); - void (*disable)(struct intc_desc *, unsigned int); -} intc_reg_fns[] = { - [REG_FN_MASK_8] = { enable_mask_8, disable_mask_8 }, - [REG_FN_MASK_32] = { enable_mask_32, disable_mask_32 }, - [REG_FN_PRIO_16] = { enable_prio_16, disable_prio_16 }, - [REG_FN_PRIO_32] = { enable_prio_32, disable_prio_32 }, +static void (*intc_enable_fns[])(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) = { + [MODE_ENABLE_REG] = intc_mode_field, + [MODE_MASK_REG] = intc_mode_zero, + [MODE_DUAL_REG] = intc_mode_field, + [MODE_PRIO_REG] = intc_mode_prio, + [MODE_PCLR_REG] = intc_mode_prio, }; -static void intc_enable(unsigned int irq) +static void (*intc_disable_fns[])(unsigned long addr, + unsigned long handle, + void (*fn)(unsigned long, + unsigned long, + unsigned long), + unsigned int irq) = { + [MODE_ENABLE_REG] = intc_mode_zero, + [MODE_MASK_REG] = intc_mode_field, + [MODE_DUAL_REG] = intc_mode_field, + [MODE_PRIO_REG] = intc_mode_zero, + [MODE_PCLR_REG] = intc_mode_field, +}; + +static inline void _intc_enable(unsigned int irq, unsigned long handle) { - struct intc_desc *desc = get_intc_desc(irq); - unsigned int data = (unsigned int) get_irq_chip_data(irq); + struct intc_desc_int *d = get_intc_desc(irq); + unsigned long addr; + unsigned int cpu; + + for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_E(handle)); cpu++) { + addr = INTC_REG(d, _INTC_ADDR_E(handle), cpu); + intc_enable_fns[_INTC_MODE(handle)](addr, handle, intc_reg_fns\ + [_INTC_FN(handle)], irq); + } +} - intc_reg_fns[_INTC_FN(data)].enable(desc, data); +static void intc_enable(unsigned int irq) +{ + _intc_enable(irq, (unsigned long)get_irq_chip_data(irq)); } static void intc_disable(unsigned int irq) { - struct intc_desc *desc = get_intc_desc(irq); - unsigned int data = (unsigned int) get_irq_chip_data(irq); - - intc_reg_fns[_INTC_FN(data)].disable(desc, data); + struct intc_desc_int *d = get_intc_desc(irq); + unsigned long handle = (unsigned long) get_irq_chip_data(irq); + unsigned long addr; + unsigned int cpu; + + for (cpu = 0; cpu < SMP_NR(d, _INTC_ADDR_D(handle)); cpu++) { + addr = INTC_REG(d, _INTC_ADDR_D(handle), cpu); + intc_disable_fns[_INTC_MODE(handle)](addr, handle,intc_reg_fns\ + [_INTC_FN(handle)], irq); + } } -static void set_sense_16(struct intc_desc *desc, unsigned int data) +static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp, + unsigned int nr_hp, + unsigned int irq) { - unsigned long addr = _INTC_PTR(desc, sense_regs, data)->reg; - unsigned int width = _INTC_PTR(desc, sense_regs, data)->field_width; - unsigned int bit = _INTC_BIT(data); - unsigned int value = _INTC_VALUE(data); + int i; + + /* this doesn't scale well, but... + * + * this function should only be used for cerain uncommon + * operations such as intc_set_priority() and intc_set_sense() + * and in those rare cases performance doesn't matter that much. + * keeping the memory footprint low is more important. + * + * one rather simple way to speed this up and still keep the + * memory footprint down is to make sure the array is sorted + * and then perform a bisect to lookup the irq. + */ - ctrl_outw(set_field(ctrl_inw(addr), value, width, bit), addr); + for (i = 0; i < nr_hp; i++) { + if ((hp + i)->irq != irq) + continue; + + return hp + i; + } + + return NULL; } -static void set_sense_32(struct intc_desc *desc, unsigned int data) +int intc_set_priority(unsigned int irq, unsigned int prio) { - unsigned long addr = _INTC_PTR(desc, sense_regs, data)->reg; - unsigned int width = _INTC_PTR(desc, sense_regs, data)->field_width; - unsigned int bit = _INTC_BIT(data); - unsigned int value = _INTC_VALUE(data); + struct intc_desc_int *d = get_intc_desc(irq); + struct intc_handle_int *ihp; + + if (!intc_prio_level[irq] || prio <= 1) + return -EINVAL; + + ihp = intc_find_irq(d->prio, d->nr_prio, irq); + if (ihp) { + if (prio >= (1 << _INTC_WIDTH(ihp->handle))) + return -EINVAL; - ctrl_outl(set_field(ctrl_inl(addr), value, width, bit), addr); + intc_prio_level[irq] = prio; + + /* + * only set secondary masking method directly + * primary masking method is using intc_prio_level[irq] + * priority level will be set during next enable() + */ + + if (_INTC_FN(ihp->handle) != REG_FN_ERR) + _intc_enable(irq, ihp->handle); + } + return 0; } #define VALID(x) (x | 0x80) @@ -172,79 +285,38 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { static int intc_set_sense(unsigned int irq, unsigned int type) { - struct intc_desc *desc = get_intc_desc(irq); + struct intc_desc_int *d = get_intc_desc(irq); unsigned char value = intc_irq_sense_table[type & IRQ_TYPE_SENSE_MASK]; - unsigned int i, j, data, bit; - intc_enum enum_id = 0; - - for (i = 0; i < desc->nr_vectors; i++) { - struct intc_vect *vect = desc->vectors + i; - - if (evt2irq(vect->vect) != irq) - continue; + struct intc_handle_int *ihp; + unsigned long addr; - enum_id = vect->enum_id; - break; - } - - if (!enum_id || !value) + if (!value) return -EINVAL; - value ^= VALID(0); - - for (i = 0; i < desc->nr_sense_regs; i++) { - struct intc_sense_reg *sr = desc->sense_regs + i; - - for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) { - if (sr->enum_ids[j] != enum_id) - continue; - - bit = sr->reg_width - ((j + 1) * sr->field_width); - data = _INTC_MK(0, i, bit, value); - - switch(sr->reg_width) { - case 16: - set_sense_16(desc, data); - break; - case 32: - set_sense_32(desc, data); - break; - } - - return 0; - } + ihp = intc_find_irq(d->sense, d->nr_sense, irq); + if (ihp) { + addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0); + intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value); } - - return -EINVAL; + return 0; } -static unsigned int __init intc_find_mask_handler(unsigned int width) +static unsigned int __init intc_get_reg(struct intc_desc_int *d, + unsigned long address) { - switch (width) { - case 8: - return REG_FN_MASK_8; - case 32: - return REG_FN_MASK_32; - } + unsigned int k; - BUG(); - return REG_FN_ERROR; -} - -static unsigned int __init intc_find_prio_handler(unsigned int width) -{ - switch (width) { - case 16: - return REG_FN_PRIO_16; - case 32: - return REG_FN_PRIO_32; + for (k = 0; k < d->nr_reg; k++) { + if (d->reg[k] == address) + return k; } BUG(); - return REG_FN_ERROR; + return 0; } -static intc_enum __init intc_grp_id(struct intc_desc *desc, intc_enum enum_id) +static intc_enum __init intc_grp_id(struct intc_desc *desc, + intc_enum enum_id) { struct intc_group *g = desc->groups; unsigned int i, j; @@ -289,10 +361,12 @@ static unsigned int __init intc_prio_value(struct intc_desc *desc, } static unsigned int __init intc_mask_data(struct intc_desc *desc, + struct intc_desc_int *d, intc_enum enum_id, int do_grps) { struct intc_mask_reg *mr = desc->mask_regs; - unsigned int i, j, fn; + unsigned int i, j, fn, mode; + unsigned long reg_e, reg_d; for (i = 0; mr && enum_id && i < desc->nr_mask_regs; i++) { mr = desc->mask_regs + i; @@ -301,25 +375,46 @@ static unsigned int __init intc_mask_data(struct intc_desc *desc, if (mr->enum_ids[j] != enum_id) continue; - fn = intc_find_mask_handler(mr->reg_width); - if (fn == REG_FN_ERROR) - return 0; + if (mr->set_reg && mr->clr_reg) { + fn = REG_FN_WRITE_BASE; + mode = MODE_DUAL_REG; + reg_e = mr->clr_reg; + reg_d = mr->set_reg; + } else { + fn = REG_FN_MODIFY_BASE; + if (mr->set_reg) { + mode = MODE_ENABLE_REG; + reg_e = mr->set_reg; + reg_d = mr->set_reg; + } else { + mode = MODE_MASK_REG; + reg_e = mr->clr_reg; + reg_d = mr->clr_reg; + } + } - return _INTC_MK(fn, i, (mr->reg_width - 1) - j, 0); + fn += (mr->reg_width >> 3) - 1; + return _INTC_MK(fn, mode, + intc_get_reg(d, reg_e), + intc_get_reg(d, reg_d), + 1, + (mr->reg_width - 1) - j); } } if (do_grps) - return intc_mask_data(desc, intc_grp_id(desc, enum_id), 0); + return intc_mask_data(desc, d, intc_grp_id(desc, enum_id), 0); return 0; } static unsigned int __init intc_prio_data(struct intc_desc *desc, + struct intc_desc_int *d, intc_enum enum_id, int do_grps) { struct intc_prio_reg *pr = desc->prio_regs; - unsigned int i, j, fn, bit, prio; + unsigned int i, j, fn, mode, bit; + unsigned long reg_e, reg_d; for (i = 0; pr && enum_id && i < desc->nr_prio_regs; i++) { pr = desc->prio_regs + i; @@ -328,28 +423,72 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, if (pr->enum_ids[j] != enum_id) continue; - fn = intc_find_prio_handler(pr->reg_width); - if (fn == REG_FN_ERROR) - return 0; + if (pr->set_reg && pr->clr_reg) { + fn = REG_FN_WRITE_BASE; + mode = MODE_PCLR_REG; + reg_e = pr->set_reg; + reg_d = pr->clr_reg; + } else { + fn = REG_FN_MODIFY_BASE; + mode = MODE_PRIO_REG; + if (!pr->set_reg) + BUG(); + reg_e = pr->set_reg; + reg_d = pr->set_reg; + } - prio = intc_prio_value(desc, enum_id, 1); + fn += (pr->reg_width >> 3) - 1; bit = pr->reg_width - ((j + 1) * pr->field_width); BUG_ON(bit < 0); - return _INTC_MK(fn, i, bit, prio); + return _INTC_MK(fn, mode, + intc_get_reg(d, reg_e), + intc_get_reg(d, reg_d), + pr->field_width, bit); } } if (do_grps) - return intc_prio_data(desc, intc_grp_id(desc, enum_id), 0); + return intc_prio_data(desc, d, intc_grp_id(desc, enum_id), 0); return 0; } -static void __init intc_register_irq(struct intc_desc *desc, intc_enum enum_id, +static unsigned int __init intc_sense_data(struct intc_desc *desc, + struct intc_desc_int *d, + intc_enum enum_id) +{ + struct intc_sense_reg *sr = desc->sense_regs; + unsigned int i, j, fn, bit; + + for (i = 0; sr && enum_id && i < desc->nr_sense_regs; i++) { + sr = desc->sense_regs + i; + + for (j = 0; j < ARRAY_SIZE(sr->enum_ids); j++) { + if (sr->enum_ids[j] != enum_id) + continue; + + fn = REG_FN_MODIFY_BASE; + fn += (sr->reg_width >> 3) - 1; + bit = sr->reg_width - ((j + 1) * sr->field_width); + + BUG_ON(bit < 0); + + return _INTC_MK(fn, 0, intc_get_reg(d, sr->reg), + 0, sr->field_width, bit); + } + } + + return 0; +} + +static void __init intc_register_irq(struct intc_desc *desc, + struct intc_desc_int *d, + intc_enum enum_id, unsigned int irq) { + struct intc_handle_int *hp; unsigned int data[2], primary; /* Prefer single interrupt source bitmap over other combinations: @@ -359,15 +498,15 @@ static void __init intc_register_irq(struct intc_desc *desc, intc_enum enum_id, * 4. priority, multiple interrupt sources (groups) */ - data[0] = intc_mask_data(desc, enum_id, 0); - data[1] = intc_prio_data(desc, enum_id, 0); + data[0] = intc_mask_data(desc, d, enum_id, 0); + data[1] = intc_prio_data(desc, d, enum_id, 0); primary = 0; if (!data[0] && data[1]) primary = 1; - data[0] = data[0] ? data[0] : intc_mask_data(desc, enum_id, 1); - data[1] = data[1] ? data[1] : intc_prio_data(desc, enum_id, 1); + data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1); + data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1); if (!data[primary]) primary ^= 1; @@ -375,31 +514,118 @@ static void __init intc_register_irq(struct intc_desc *desc, intc_enum enum_id, BUG_ON(!data[primary]); /* must have primary masking method */ disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &desc->chip, + set_irq_chip_and_handler_name(irq, &d->chip, handle_level_irq, "level"); set_irq_chip_data(irq, (void *)data[primary]); + /* record the desired priority level */ + intc_prio_level[irq] = intc_prio_value(desc, enum_id, 1); + /* enable secondary masking method if present */ if (data[!primary]) - intc_reg_fns[_INTC_FN(data[!primary])].enable(desc, - data[!primary]); + _intc_enable(irq, data[!primary]); + + /* add irq to d->prio list if priority is available */ + if (data[1]) { + hp = d->prio + d->nr_prio; + hp->irq = irq; + hp->handle = data[1]; + + if (primary) { + /* + * only secondary priority should access registers, so + * set _INTC_FN(h) = REG_FN_ERR for intc_set_priority() + */ + + hp->handle &= ~_INTC_MK(0x0f, 0, 0, 0, 0, 0); + hp->handle |= _INTC_MK(REG_FN_ERR, 0, 0, 0, 0, 0); + } + d->nr_prio++; + } + + /* add irq to d->sense list if sense is available */ + data[0] = intc_sense_data(desc, d, enum_id); + if (data[0]) { + (d->sense + d->nr_sense)->irq = irq; + (d->sense + d->nr_sense)->handle = data[0]; + d->nr_sense++; + } /* irq should be disabled by default */ - desc->chip.mask(irq); + d->chip.mask(irq); } +static unsigned int __init save_reg(struct intc_desc_int *d, + unsigned int cnt, + unsigned long value, + unsigned int smp) +{ + if (value) { + d->reg[cnt] = value; +#ifdef CONFIG_SMP + d->smp[cnt] = smp; +#endif + return 1; + } + + return 0; +} + + void __init register_intc_controller(struct intc_desc *desc) { - unsigned int i; + unsigned int i, k, smp; + struct intc_desc_int *d; + + d = alloc_bootmem(sizeof(*d)); + + d->nr_reg = desc->mask_regs ? desc->nr_mask_regs * 2 : 0; + d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; + d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; + + d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); +#ifdef CONFIG_SMP + d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp)); +#endif + k = 0; + + if (desc->mask_regs) { + for (i = 0; i < desc->nr_mask_regs; i++) { + smp = IS_SMP(desc->mask_regs[i]); + k += save_reg(d, k, desc->mask_regs[i].set_reg, smp); + k += save_reg(d, k, desc->mask_regs[i].clr_reg, smp); + } + } + + if (desc->prio_regs) { + d->prio = alloc_bootmem(desc->nr_vectors * sizeof(*d->prio)); + + for (i = 0; i < desc->nr_prio_regs; i++) { + smp = IS_SMP(desc->prio_regs[i]); + k += save_reg(d, k, desc->prio_regs[i].set_reg, smp); + k += save_reg(d, k, desc->prio_regs[i].clr_reg, smp); + } + } + + if (desc->sense_regs) { + d->sense = alloc_bootmem(desc->nr_vectors * sizeof(*d->sense)); + + for (i = 0; i < desc->nr_sense_regs; i++) { + k += save_reg(d, k, desc->sense_regs[i].reg, 0); + } + } + + BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ - desc->chip.mask = intc_disable; - desc->chip.unmask = intc_enable; - desc->chip.mask_ack = intc_disable; - desc->chip.set_type = intc_set_sense; + d->chip.name = desc->name; + d->chip.mask = intc_disable; + d->chip.unmask = intc_enable; + d->chip.mask_ack = intc_disable; + d->chip.set_type = intc_set_sense; for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; - intc_register_irq(desc, vect->enum_id, evt2irq(vect->vect)); + intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect)); } } diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c deleted file mode 100644 index cc52213..0000000 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Interrupt handling for INTC2-based IRQ. - * - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org) - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * These are the "new Hitachi style" interrupts, as present on the - * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. - */ -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <asm/smp.h> - -static inline struct intc2_desc *get_intc2_desc(unsigned int irq) -{ - struct irq_chip *chip = get_irq_chip(irq); - return (void *)((char *)chip - offsetof(struct intc2_desc, chip)); -} - -static void disable_intc2_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - struct intc2_desc *d = get_intc2_desc(irq); - - ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset + - (hard_smp_processor_id() * 4)); -} - -static void enable_intc2_irq(unsigned int irq) -{ - struct intc2_data *p = get_irq_chip_data(irq); - struct intc2_desc *d = get_intc2_desc(irq); - - ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset + - (hard_smp_processor_id() * 4)); -} - -/* - * Setup an INTC2 style interrupt. - * NOTE: Unlike IPR interrupts, parameters are not shifted by this code, - * allowing the use of the numbers straight out of the datasheet. - * For example: - * PIO1 which is INTPRI00[19,16] and INTMSK00[13] - * would be: ^ ^ ^ ^ - * | | | | - * { 84, 0, 16, 0, 13 }, - * - * in the intc2_data table. - */ -void register_intc2_controller(struct intc2_desc *desc) -{ - int i; - - desc->chip.mask = disable_intc2_irq; - desc->chip.unmask = enable_intc2_irq; - desc->chip.mask_ack = disable_intc2_irq; - - for (i = 0; i < desc->nr_irqs; i++) { - unsigned long ipr, flags; - struct intc2_data *p = desc->intc2_data + i; - - disable_irq_nosync(p->irq); - - if (desc->prio_base) { - /* Set the priority level */ - local_irq_save(flags); - - ipr = ctrl_inl(desc->prio_base + p->ipr_offset); - ipr &= ~(0xf << p->ipr_shift); - ipr |= p->priority << p->ipr_shift; - ctrl_outl(ipr, desc->prio_base + p->ipr_offset); - - local_irq_restore(flags); - } - - set_irq_chip_and_handler_name(p->irq, &desc->chip, - handle_level_irq, "level"); - set_irq_chip_data(p->irq, p); - - disable_intc2_irq(p->irq); - } -} diff --git a/arch/sh/kernel/cpu/sh2/probe.c b/arch/sh/kernel/cpu/sh2/probe.c index abbf174..5916d90 100644 --- a/arch/sh/kernel/cpu/sh2/probe.c +++ b/arch/sh/kernel/cpu/sh2/probe.c @@ -10,26 +10,25 @@ * for more details. */ #include <linux/init.h> -#include <linux/smp.h> #include <asm/processor.h> #include <asm/cache.h> int __init detect_cpu_and_cache_system(void) { #if defined(CONFIG_CPU_SUBTYPE_SH7619) - current_cpu_data.type = CPU_SH7619; - current_cpu_data.dcache.ways = 4; - current_cpu_data.dcache.way_incr = (1<<12); - current_cpu_data.dcache.sets = 256; - current_cpu_data.dcache.entry_shift = 4; - current_cpu_data.dcache.linesz = L1_CACHE_BYTES; - current_cpu_data.dcache.flags = 0; + boot_cpu_data.type = CPU_SH7619; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.dcache.way_incr = (1<<12); + boot_cpu_data.dcache.sets = 256; + boot_cpu_data.dcache.entry_shift = 4; + boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + boot_cpu_data.dcache.flags = 0; #endif /* * SH-2 doesn't have separate caches */ - current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; - current_cpu_data.icache = current_cpu_data.dcache; + boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + boot_cpu_data.icache = boot_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index a979b98..ec6adc3 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -12,6 +12,61 @@ #include <linux/serial.h> #include <asm/sci.h> +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, EDMAC, CMT0, CMT1, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + HIF_HIFI, HIF_HIFBI, + DMAC0, DMAC1, DMAC2, DMAC3, + SIOF, + + /* interrupt groups */ + SCIF0, SCIF1, SCIF2, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81), + INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83), + INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85), + INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87), + INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89), + INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91), + INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93), + INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95), + INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97), + INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99), + INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101), + INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105), + INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107), + INTC_IRQ(SIOF, 108), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } }, + { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } }, + { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } }, + { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups, + NULL, NULL, prio_registers, NULL); + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xf8400000, @@ -52,43 +107,7 @@ static int __init sh7619_devices_setup(void) } __initcall(sh7619_devices_setup); -static struct ipr_data ipr_irq_table[] = { - { 86, 0, 4, 2 }, /* CMI0 */ - { 88, 1, 12, 3 }, /* SCIF0_ERI */ - { 89, 1, 12, 3 }, /* SCIF0_RXI */ - { 90, 1, 12, 3 }, /* SCIF0_BRI */ - { 91, 1, 12, 3 }, /* SCIF0_TXI */ - { 92, 1, 8, 3 }, /* SCIF1_ERI */ - { 93, 1, 8, 3 }, /* SCIF1_RXI */ - { 94, 1, 8, 3 }, /* SCIF1_BRI */ - { 95, 1, 8, 3 }, /* SCIF1_TXI */ - { 96, 1, 4, 3 }, /* SCIF2_ERI */ - { 97, 1, 4, 3 }, /* SCIF2_RXI */ - { 98, 1, 4, 3 }, /* SCIF2_BRI */ - { 99, 1, 4, 3 }, /* SCIF2_TXI */ -}; - -static unsigned long ipr_offsets[] = { - 0xf8080000, /* IPRC */ - 0xf8080002, /* IPRD */ - 0xf8080004, /* IPRE */ - 0xf8080006, /* IPRF */ - 0xf8080008, /* IPRG */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7619", - }, -}; - void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index f455c35..6d02465 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -17,15 +17,15 @@ int __init detect_cpu_and_cache_system(void) { /* Just SH7206 for now .. */ - current_cpu_data.type = CPU_SH7206; - current_cpu_data.flags |= CPU_HAS_OP32; + boot_cpu_data.type = CPU_SH7206; + boot_cpu_data.flags |= CPU_HAS_OP32; - current_cpu_data.dcache.ways = 4; - current_cpu_data.dcache.way_incr = (1 << 11); - current_cpu_data.dcache.sets = 128; - current_cpu_data.dcache.entry_shift = 4; - current_cpu_data.dcache.linesz = L1_CACHE_BYTES; - current_cpu_data.dcache.flags = 0; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.dcache.way_incr = (1 << 11); + boot_cpu_data.dcache.sets = 128; + boot_cpu_data.dcache.entry_shift = 4; + boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + boot_cpu_data.dcache.flags = 0; /* * The icache is the same as the dcache as far as this setup is @@ -33,7 +33,7 @@ int __init detect_cpu_and_cache_system(void) * lacks the U bit that the dcache has, none of this has any bearing * on the cache info. */ - current_cpu_data.icache = current_cpu_data.dcache; + boot_cpu_data.icache = boot_cpu_data.dcache; return 0; } diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index deab165..bd745aa 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -12,27 +12,184 @@ #include <linux/serial.h> #include <asm/sci.h> +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + ADC_ADI0, ADC_ADI1, + DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, + DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, + DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, + DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + CMT0, CMT1, BSC, WDT, + MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, + MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, + MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, + MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, + MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, + MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, + MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, + POE2_OEI1, POE2_OEI2, + MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V, + MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V, + MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W, + POE2_OEI3, + IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI, + SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, + SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, + + /* interrupt groups */ + PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S, + IIC3, SCIF0, SCIF1, SCIF2, SCIF3, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), + INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), + INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), + INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), + INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), + INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96), + INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), + INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), + INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), + INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), + INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), + INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), + INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), + INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144), + INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152), + INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157), + INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159), + INTC_IRQ(MTU2_TCI0V, 160), + INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162), + INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165), + INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169), + INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173), + INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177), + INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181), + INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183), + INTC_IRQ(MTU2_TCI3V, 184), + INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189), + INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191), + INTC_IRQ(MTU2_TCI4V, 192), + INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197), + INTC_IRQ(MTU2_TGI5W, 198), + INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201), + INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205), + INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207), + INTC_IRQ(MTU2S_TCI3V, 208), + INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213), + INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215), + INTC_IRQ(MTU2S_TCI4V, 216), + INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221), + INTC_IRQ(MTU2S_TGI5W, 222), + INTC_IRQ(POE2_OEI3, 224), + INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229), + INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231), + INTC_IRQ(IIC3_TEI, 232), + INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241), + INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243), + INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245), + INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247), + INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249), + INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251), + INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253), + INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, + PINT4, PINT5, PINT6, PINT7), + INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), + INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), + INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), + INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), + INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), + INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), + INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), + INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), + INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), + INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), + INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), + INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), + INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), + INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), + INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), + INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), + INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), + INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2), + INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B, + MTU2S_TGI3C, MTU2S_TGI3D), + INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B, + MTU2S_TGI4C, MTU2S_TGI4D), + INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W), + INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI), + INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), + INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, ADC_ADI0, ADC_ADI1 } }, + { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } }, + { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { CMT0, CMT1, BSC, WDT } }, + { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { MTU0_ABCD, MTU0_VEF, + MTU1_AB, MTU1_VU } }, + { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU2_TCI3V } }, + { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU4_ABCD, MTU2_TCI4V, + MTU5, POE2_12 } }, + { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { MTU3S_ABCD, MTU2S_TCI3V, + MTU4S_ABCD, MTU2S_TCI4V } }, + { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { MTU5S, POE2_OEI3, IIC3, 0 } }, + { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF0, SCIF1, SCIF2, SCIF3 } }, +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfffe0808, 0, 16, /* PINTER */ + { 0, 0, 0, 0, 0, 0, 0, 0, + PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups, + NULL, mask_registers, prio_registers, NULL); + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xfffe8000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 241, 242, 243, 240}, + .irqs = { 241, 242, 243, 240 }, }, { .mapbase = 0xfffe8800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 247, 244, 245, 246}, + .irqs = { 245, 246, 247, 244 }, }, { .mapbase = 0xfffe9000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 249, 250, 251, 248}, + .irqs = { 249, 250, 251, 248 }, }, { .mapbase = 0xfffe9800, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 253, 254, 255, 252}, + .irqs = { 253, 254, 255, 252 }, }, { .flags = 0, } @@ -57,57 +214,7 @@ static int __init sh7206_devices_setup(void) } __initcall(sh7206_devices_setup); -static struct ipr_data ipr_irq_table[] = { - { 140, 7, 12, 2 }, /* CMI0 */ - { 164, 8, 4, 2 }, /* MTU2_TGI1A */ - { 240, 13, 12, 3 }, /* SCIF0_BRI */ - { 241, 13, 12, 3 }, /* SCIF0_ERI */ - { 242, 13, 12, 3 }, /* SCIF0_RXI */ - { 243, 13, 12, 3 }, /* SCIF0_TXI */ - { 244, 13, 8, 3 }, /* SCIF1_BRI */ - { 245, 13, 8, 3 }, /* SCIF1_ERI */ - { 246, 13, 8, 3 }, /* SCIF1_RXI */ - { 247, 13, 8, 3 }, /* SCIF1_TXI */ - { 248, 13, 4, 3 }, /* SCIF2_BRI */ - { 249, 13, 4, 3 }, /* SCIF2_ERI */ - { 250, 13, 4, 3 }, /* SCIF2_RXI */ - { 251, 13, 4, 3 }, /* SCIF2_TXI */ - { 252, 13, 0, 3 }, /* SCIF3_BRI */ - { 253, 13, 0, 3 }, /* SCIF3_ERI */ - { 254, 13, 0, 3 }, /* SCIF3_RXI */ - { 255, 13, 0, 3 }, /* SCIF3_TXI */ -}; - -static unsigned long ipr_offsets[] = { - 0xfffe0818, /* IPR01 */ - 0xfffe081a, /* IPR02 */ - 0, /* unused */ - 0, /* unused */ - 0xfffe0820, /* IPR05 */ - 0xfffe0c00, /* IPR06 */ - 0xfffe0c02, /* IPR07 */ - 0xfffe0c04, /* IPR08 */ - 0xfffe0c06, /* IPR09 */ - 0xfffe0c08, /* IPR10 */ - 0xfffe0c0a, /* IPR11 */ - 0xfffe0c0c, /* IPR12 */ - 0xfffe0c0e, /* IPR13 */ - 0xfffe0c10, /* IPR14 */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7206", - }, -}; - void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 55b7507..646eb69 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -6,12 +6,13 @@ obj-y := ex.o probe.o entry.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o -obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o -obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o -obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o -obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o +obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o @@ -19,5 +20,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o +clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index 647623b..bf579e0 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -50,44 +50,47 @@ int __init detect_cpu_and_cache_system(void) back_to_P1(); - current_cpu_data.dcache.ways = 4; - current_cpu_data.dcache.entry_shift = 4; - current_cpu_data.dcache.linesz = L1_CACHE_BYTES; - current_cpu_data.dcache.flags = 0; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.dcache.entry_shift = 4; + boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + boot_cpu_data.dcache.flags = 0; /* * 7709A/7729 has 16K cache (256-entry), while 7702 has only * 2K(direct) 7702 is not supported (yet) */ if (data0 == data1 && data2 == data3) { /* Shadow */ - current_cpu_data.dcache.way_incr = (1 << 11); - current_cpu_data.dcache.entry_mask = 0x7f0; - current_cpu_data.dcache.sets = 128; - current_cpu_data.type = CPU_SH7708; + boot_cpu_data.dcache.way_incr = (1 << 11); + boot_cpu_data.dcache.entry_mask = 0x7f0; + boot_cpu_data.dcache.sets = 128; + boot_cpu_data.type = CPU_SH7708; - current_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC; + boot_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC; } else { /* 7709A or 7729 */ - current_cpu_data.dcache.way_incr = (1 << 12); - current_cpu_data.dcache.entry_mask = 0xff0; - current_cpu_data.dcache.sets = 256; - current_cpu_data.type = CPU_SH7729; + boot_cpu_data.dcache.way_incr = (1 << 12); + boot_cpu_data.dcache.entry_mask = 0xff0; + boot_cpu_data.dcache.sets = 256; + boot_cpu_data.type = CPU_SH7729; #if defined(CONFIG_CPU_SUBTYPE_SH7706) - current_cpu_data.type = CPU_SH7706; + boot_cpu_data.type = CPU_SH7706; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7710) - current_cpu_data.type = CPU_SH7710; + boot_cpu_data.type = CPU_SH7710; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7712) - current_cpu_data.type = CPU_SH7712; + boot_cpu_data.type = CPU_SH7712; +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7720) + boot_cpu_data.type = CPU_SH7720; #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) - current_cpu_data.type = CPU_SH7705; + boot_cpu_data.type = CPU_SH7705; #if defined(CONFIG_SH7705_CACHE_32KB) - current_cpu_data.dcache.way_incr = (1 << 13); - current_cpu_data.dcache.entry_mask = 0x1ff0; - current_cpu_data.dcache.sets = 512; + boot_cpu_data.dcache.way_incr = (1 << 13); + boot_cpu_data.dcache.entry_mask = 0x1ff0; + boot_cpu_data.dcache.sets = 512; ctrl_outl(CCR_CACHE_32KB, CCR3); #else ctrl_outl(CCR_CACHE_16KB, CCR3); @@ -98,9 +101,8 @@ int __init detect_cpu_and_cache_system(void) /* * SH-3 doesn't have separate caches */ - current_cpu_data.dcache.flags |= SH_CACHE_COMBINED; - current_cpu_data.icache = current_cpu_data.dcache; + boot_cpu_data.dcache.flags |= SH_CACHE_COMBINED; + boot_cpu_data.icache = boot_cpu_data.dcache; return 0; } - diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index ebd9d06..f6c65f2 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -1,7 +1,7 @@ /* * SH7705 Setup * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006, 2007 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -10,8 +10,90 @@ */ #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/serial.h> #include <asm/sci.h> +#include <asm/rtc.h> + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + PINT07, PINT815, + DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, + SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, + ADC_ADI, + USB_USI0, USB_USI1, + TPU0, TPU1, TPU2, TPU3, + TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, + REF_RCMI, + + /* interrupt groups */ + RTC, TMU2, DMAC, USB, SCIF2, SCIF0, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), + INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), + INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), + INTC_VECT(SCIF2_TXI, 0x960), + INTC_VECT(ADC_ADI, 0x980), + INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40), + INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20), + INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF_RCMI, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), + INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), + INTC_GROUP(USB, USB_USI0, USB_USI1), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(DMAC, 7), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF0, 3), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } }, + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, IRQ5, IRQ4 } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, SCIF0, SCIF2, ADC_ADI } }, + { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, 0, USB } }, + { 0xa4080002, 0, 16, 4, /* IPRG */ { TPU0, TPU1 } }, + { 0xa4080004, 0, 16, 4, /* IPRH */ { TPU2, TPU3 } }, + +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, + priorities, NULL, prio_registers, NULL); + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL, + priorities, NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { @@ -37,8 +119,43 @@ static struct platform_device sci_device = { }, }; +static struct resource rtc_resources[] = { + [0] = { + .start = 0xfffffec0, + .end = 0xfffffec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_rtc_platform_info rtc_info = { + .capabilities = RTC_CAP_4_DIGIT_YEAR, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, + .dev = { + .platform_data = &rtc_info, + }, +}; + static struct platform_device *sh7705_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh7705_devices_setup(void) @@ -48,51 +165,16 @@ static int __init sh7705_devices_setup(void) } __initcall(sh7705_devices_setup); -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR-idx, shift, priority */ - { 16, 0, 12, 2 }, /* TMU0 TUNI*/ - { 17, 0, 8, 2 }, /* TMU1 TUNI */ - { 18, 0, 4, 2 }, /* TMU2 TUNI */ - { 27, 1, 12, 2 }, /* WDT ITI */ - { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ - { 21, 0, 0, 2 }, /* RTC PRI (period) */ - { 22, 0, 0, 2 }, /* RTC CUI (carry) */ - { 48, 4, 12, 7 }, /* DMAC DMTE0 */ - { 49, 4, 12, 7 }, /* DMAC DMTE1 */ - { 50, 4, 12, 7 }, /* DMAC DMTE2 */ - { 51, 4, 12, 7 }, /* DMAC DMTE3 */ - { 52, 4, 8, 3 }, /* SCIF0 ERI */ - { 53, 4, 8, 3 }, /* SCIF0 RXI */ - { 55, 4, 8, 3 }, /* SCIF0 TXI */ - { 56, 4, 4, 3 }, /* SCIF1 ERI */ - { 57, 4, 4, 3 }, /* SCIF1 RXI */ - { 59, 4, 4, 3 }, /* SCIF1 TXI */ -}; - -static unsigned long ipr_offsets[] = { - 0xFFFFFEE2, /* 0: IPRA */ - 0xFFFFFEE4, /* 1: IPRB */ - 0xA4000016, /* 2: IPRC */ - 0xA4000018, /* 3: IPRD */ - 0xA400001A, /* 4: IPRE */ - 0xA4080000, /* 5: IPRF */ - 0xA4080002, /* 6: IPRG */ - 0xA4080004, /* 7: IPRH */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7705", - }, -}; +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { + register_intc_controller(&intc_desc_irq); + return; + } + BUG(); +} void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7708.c b/arch/sh/kernel/cpu/sh3/setup-sh7708.c deleted file mode 100644 index f933723..0000000 --- a/arch/sh/kernel/cpu/sh3/setup-sh7708.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * SH7708 Setup - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial.h> -#include <asm/sci.h> - -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffffe80, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - -static struct platform_device *sh7708_devices[] __initdata = { - &sci_device, -}; - -static int __init sh7708_devices_setup(void) -{ - return platform_add_devices(sh7708_devices, - ARRAY_SIZE(sh7708_devices)); -} -__initcall(sh7708_devices_setup); diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c deleted file mode 100644 index 086f8e2..0000000 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - * SH7707/SH7709 Setup - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial.h> -#include <asm/sci.h> - -static struct resource rtc_resources[] = { - [0] = { - .start = 0xfffffec0, - .end = 0xfffffec0 + 0x1e, - .flags = IORESOURCE_IO, - }, - [1] = { - .start = 20, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = 21, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = 22, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct plat_sci_port sci_platform_data[] = { - { - .mapbase = 0xfffffe80, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, - .irqs = { 23, 24, 25, 0 }, - }, { - .mapbase = 0xa4000150, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, - }, { - .mapbase = 0xa4000140, - .flags = UPF_BOOT_AUTOCONF, - .type = PORT_IRDA, - .irqs = { 52, 53, 55, 54 }, - }, { - .flags = 0, - } -}; - -static struct platform_device sci_device = { - .name = "sh-sci", - .id = -1, - .dev = { - .platform_data = sci_platform_data, - }, -}; - -static struct platform_device rtc_device = { - .name = "sh-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -static struct platform_device *sh7709_devices[] __initdata = { - &sci_device, - &rtc_device, -}; - -static int __init sh7709_devices_setup(void) -{ - return platform_add_devices(sh7709_devices, - ARRAY_SIZE(sh7709_devices)); -} -__initcall(sh7709_devices_setup); - -static struct ipr_data ipr_irq_table[] = { - { 16, 0, 12, 2 }, /* TMU TUNI0 */ - { 17, 0, 8, 4 }, /* TMU TUNI1 */ - { 18, 0, 4, 1 }, /* TMU TUNI1 */ - { 19, 0, 4, 1 }, /* TMU TUNI1 */ - { 20, 0, 0, 2 }, /* RTC CUI */ - { 21, 0, 0, 2 }, /* RTC CUI */ - { 22, 0, 0, 2 }, /* RTC CUI */ - - { 23, 1, 4, 3 }, /* SCI */ - { 24, 1, 4, 3 }, /* SCI */ - { 25, 1, 4, 3 }, /* SCI */ - { 26, 1, 4, 3 }, /* SCI */ - { 27, 1, 12, 3 }, /* WDT ITI */ - - { 32, 2, 0, 1 }, /* IRQ 0 */ - { 33, 2, 4, 1 }, /* IRQ 1 */ - { 34, 2, 8, 1 }, /* IRQ 2 APM */ - { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */ - - { 36, 3, 0, 1 }, /* IRQ 4 */ - { 37, 3, 4, 1 }, /* IRQ 5 */ - - { 48, 4, 12, 7 }, /* DMA */ - { 49, 4, 12, 7 }, /* DMA */ - { 50, 4, 12, 7 }, /* DMA */ - { 51, 4, 12, 7 }, /* DMA */ - - { 52, 4, 8, 3 }, /* IRDA */ - { 53, 4, 8, 3 }, /* IRDA */ - { 54, 4, 8, 3 }, /* IRDA */ - { 55, 4, 8, 3 }, /* IRDA */ - - { 56, 4, 4, 3 }, /* SCIF */ - { 57, 4, 4, 3 }, /* SCIF */ - { 58, 4, 4, 3 }, /* SCIF */ - { 59, 4, 4, 3 }, /* SCIF */ -}; - -static unsigned long ipr_offsets[] = { - 0xfffffee2, /* 0: IPRA */ - 0xfffffee4, /* 1: IPRB */ - 0xa4000016, /* 2: IPRC */ - 0xa4000018, /* 3: IPRD */ - 0xa400001a, /* 4: IPRE */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7709", - }, -}; - -void __init plat_irq_setup(void) -{ - register_ipr_controller(&ipr_irq_desc); -} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c new file mode 100644 index 0000000..60b04b1 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -0,0 +1,224 @@ +/* + * SH3 Setup code for SH7706, SH7707, SH7708, SH7709 + * + * Copyright (C) 2007 Magnus Damm + * + * Based on setup-sh7709.c + * + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <asm/sci.h> + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + PINT07, PINT815, + DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI, + ADC_ADI, + LCDC, PCC0, PCC1, + TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, + REF_RCMI, REF_ROVI, + + /* interrupt groups */ + RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500), + INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF_RCMI, 0x580), + INTC_VECT(REF_ROVI, 0x5a0), +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), + INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(ADC_ADI, 0x980), + INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920), + INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960), +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + INTC_VECT(LCDC, 0x9a0), + INTC_VECT(PCC0, 0x9c0), INTC_VECT(PCC1, 0x9e0), +#endif +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), + INTC_GROUP(REF, REF_RCMI, REF_ROVI), + INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), + INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(DMAC, 7), + INTC_PRIO(SCI, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF0, 3), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } }, +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } }, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { 0xa4000018, 0, 16, 4, /* IPRD */ { PINT07, PINT815, } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { 0, SCIF0 } }, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) + { 0xa400001c, 0, 16, 4, /* IPRF */ { 0, LCDC, PCC0, PCC1, } }, +#endif +}; + +static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, + priorities, NULL, prio_registers, NULL); + +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL, + priorities, NULL, prio_registers, NULL); +#endif + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xfffffec0, + .end = 0xfffffec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffffe80, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 23, 24, 25, 0 }, + }, +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { + .mapbase = 0xa4000150, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 57, 59, 58 }, + }, +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + { + .mapbase = 0xa4000140, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_IRDA, + .irqs = { 52, 53, 55, 54 }, + }, +#endif + { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh770x_devices[] __initdata = { + &sci_device, + &rtc_device, +}; + +static int __init sh770x_devices_setup(void) +{ + return platform_add_devices(sh770x_devices, + ARRAY_SIZE(sh770x_devices)); +} +__initcall(sh770x_devices_setup); + +#define INTC_ICR1 0xa4000010UL +#define INTC_ICR1_IRQLVL (1<<14) + +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { +#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) + ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1); + register_intc_controller(&intc_desc_irq); + return; +#endif + } + BUG(); +} + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 1322848..84e5629 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -1,7 +1,7 @@ /* - * SH7710 Setup + * SH3 Setup code for SH7710, SH7712 * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006, 2007 Paul Mundt * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public @@ -10,8 +10,140 @@ */ #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/serial.h> #include <asm/sci.h> +#include <asm/rtc.h> + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, + DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + DMAC_DEI4, DMAC_DEI5, + IPSEC, + EDMAC0, EDMAC1, EDMAC2, + SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI, + SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI, + TMU0, TMU1, TMU2, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, + REF, + + /* interrupt groups */ + RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), + INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920), + INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960), + INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0), +#ifdef CONFIG_CPU_SUBTYPE_SH7710 + INTC_VECT(IPSEC, 0xbe0), +#endif + INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20), + INTC_VECT(EDMAC2, 0xc40), + INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20), + INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60), + INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0), + INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5), + INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI), + INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(DMAC1, 7), + INTC_PRIO(DMAC2, 7), + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SIOF0, 3), + INTC_PRIO(SIOF1, 3), + INTC_PRIO(EDMAC0, 5), + INTC_PRIO(EDMAC1, 5), + INTC_PRIO(EDMAC2, 5), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, + { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } }, + { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } }, +#ifdef CONFIG_CPU_SUBTYPE_SH7710 + { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } }, +#endif + { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } }, + { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } }, + { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, + priorities, NULL, prio_registers, NULL); + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL, + priorities, NULL, prio_registers, NULL); + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa413fec0, + .end = 0xa413fec0 + 0x1e, + .flags = IORESOURCE_IO, + }, + [1] = { + .start = 20, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = 22, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_rtc_platform_info rtc_info = { + .capabilities = RTC_CAP_4_DIGIT_YEAR, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, + .dev = { + .platform_data = &rtc_info, + }, +}; static struct plat_sci_port sci_platform_data[] = { { @@ -20,7 +152,7 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 52, 53, 55, 54 }, }, { - .mapbase = 0xa4420000, + .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 56, 57, 59, 58 }, @@ -40,6 +172,7 @@ static struct platform_device sci_device = { static struct platform_device *sh7710_devices[] __initdata = { &sci_device, + &rtc_device, }; static int __init sh7710_devices_setup(void) @@ -49,59 +182,16 @@ static int __init sh7710_devices_setup(void) } __initcall(sh7710_devices_setup); -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR-idx, shift, priority */ - { 16, 0, 12, 2 }, /* TMU0 TUNI*/ - { 17, 0, 8, 2 }, /* TMU1 TUNI */ - { 18, 0, 4, 2 }, /* TMU2 TUNI */ - { 27, 1, 12, 2 }, /* WDT ITI */ - { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ - { 21, 0, 0, 2 }, /* RTC PRI (period) */ - { 22, 0, 0, 2 }, /* RTC CUI (carry) */ - { 48, 4, 12, 7 }, /* DMAC DMTE0 */ - { 49, 4, 12, 7 }, /* DMAC DMTE1 */ - { 50, 4, 12, 7 }, /* DMAC DMTE2 */ - { 51, 4, 12, 7 }, /* DMAC DMTE3 */ - { 52, 4, 8, 3 }, /* SCIF0 ERI */ - { 53, 4, 8, 3 }, /* SCIF0 RXI */ - { 54, 4, 8, 3 }, /* SCIF0 BRI */ - { 55, 4, 8, 3 }, /* SCIF0 TXI */ - { 56, 4, 4, 3 }, /* SCIF1 ERI */ - { 57, 4, 4, 3 }, /* SCIF1 RXI */ - { 58, 4, 4, 3 }, /* SCIF1 BRI */ - { 59, 4, 4, 3 }, /* SCIF1 TXI */ - { 76, 5, 8, 7 }, /* DMAC DMTE4 */ - { 77, 5, 8, 7 }, /* DMAC DMTE5 */ - { 80, 6, 12, 5 }, /* EDMAC EINT0 */ - { 81, 6, 8, 5 }, /* EDMAC EINT1 */ - { 82, 6, 4, 5 }, /* EDMAC EINT2 */ -}; - -static unsigned long ipr_offsets[] = { - 0xA414FEE2, /* 0: IPRA */ - 0xA414FEE4, /* 1: IPRB */ - 0xA4140016, /* 2: IPRC */ - 0xA4140018, /* 3: IPRD */ - 0xA414001A, /* 4: IPRE */ - 0xA4080000, /* 5: IPRF */ - 0xA4080002, /* 6: IPRG */ - 0xA4080004, /* 7: IPRH */ - 0xA4080006, /* 8: IPRI */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7710", - }, -}; +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { + register_intc_controller(&intc_desc_irq); + return; + } + BUG(); +} void __init plat_irq_setup(void) { - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c new file mode 100644 index 0000000..a0929b8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -0,0 +1,210 @@ +/* + * SH7720 Setup + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c: + * + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 Jamie Lenehan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <asm/sci.h> +#include <asm/rtc.h> + +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR_IRLM 0x4000 +#define INTC_ICR_IRQ (~INTC_ICR_IRLM) + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa413fec0, + .end = 0xa413fec0 + 0x28 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 22, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_rtc_platform_info rtc_info = { + .capabilities = RTC_CAP_4_DIGIT_YEAR, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, + .dev = { + .platform_data = &rtc_info, + }, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xa4430000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + }, { + .mapbase = 0xa4438000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + }, { + + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7720_devices[] __initdata = { + &rtc_device, + &sci_device, +}; + +static int __init sh7720_devices_setup(void) +{ + return platform_add_devices(sh7720_devices, + ARRAY_SIZE(sh7720_devices)); +} +__initcall(sh7720_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI, + WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + IRQ0, IRQ1, IRQ2, IRQ3, + USBF_SPD, TMU_SUNI, IRQ5, IRQ4, + DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL, + ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT, + SCIF0, SCIF1, + PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC, + SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC, + USBHI, AFEIF, + H_UDI, + /* interrupt groups */ + TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480), + INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500), + INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540), + INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580), + /* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0), + INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800), + INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840), + INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900), + INTC_VECT(SSL, 0x980), INTC_VECT(USBFI0, 0xa20), + INTC_VECT(USBFI1, 0xa40), INTC_VECT(USBHI, 0xa60), + INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0), + INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00), + INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80), + INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00), + INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80), + INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0), + INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00), + INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0), + INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0), + INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60), + INTC_VECT(AFEIF, 0xfe0), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU, TMU0, TMU1, TMU2), + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), + INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3), + INTC_GROUP(USBFI, USBFI0, USBFI1), + INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5), + INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3), + INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 2), + INTC_PRIO(SCIF1, 2), + INTC_PRIO(DMAC1, 1), + INTC_PRIO(DMAC2, 1), + INTC_PRIO(RTC, 2), + INTC_PRIO(TMU, 2), + INTC_PRIO(TPU, 2), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, + { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } }, + { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } }, + { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } }, + { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } }, + { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } }, + { 0xA4080006UL, 0, 16, 4, /* IPRI */ { SIOF0, SIOF1, MMC, PCC } }, + { 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, + priorities, NULL, prio_registers, NULL); + +static struct intc_sense_reg sense_registers[] __initdata = { + { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, +}; + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), +}; + +static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq, + NULL, priorities, NULL, prio_registers, sense_registers); + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1); + register_intc_controller(&intc_irq_desc); + break; + default: + BUG(); + } +} + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 98d28fb..21375d7 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -3,7 +3,7 @@ * * CPU Subtype Probing for SH-4. * - * Copyright (C) 2001 - 2006 Paul Mundt + * Copyright (C) 2001 - 2007 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -12,7 +12,6 @@ */ #include <linux/init.h> #include <linux/io.h> -#include <linux/smp.h> #include <asm/processor.h> #include <asm/cache.h> @@ -36,37 +35,34 @@ int __init detect_cpu_and_cache_system(void) /* * Setup some sane SH-4 defaults for the icache */ - current_cpu_data.icache.way_incr = (1 << 13); - current_cpu_data.icache.entry_shift = 5; - current_cpu_data.icache.sets = 256; - current_cpu_data.icache.ways = 1; - current_cpu_data.icache.linesz = L1_CACHE_BYTES; + boot_cpu_data.icache.way_incr = (1 << 13); + boot_cpu_data.icache.entry_shift = 5; + boot_cpu_data.icache.sets = 256; + boot_cpu_data.icache.ways = 1; + boot_cpu_data.icache.linesz = L1_CACHE_BYTES; /* * And again for the dcache .. */ - current_cpu_data.dcache.way_incr = (1 << 14); - current_cpu_data.dcache.entry_shift = 5; - current_cpu_data.dcache.sets = 512; - current_cpu_data.dcache.ways = 1; - current_cpu_data.dcache.linesz = L1_CACHE_BYTES; + boot_cpu_data.dcache.way_incr = (1 << 14); + boot_cpu_data.dcache.entry_shift = 5; + boot_cpu_data.dcache.sets = 512; + boot_cpu_data.dcache.ways = 1; + boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; /* - * Setup some generic flags we can probe - * (L2 and DSP detection only work on SH-4A) + * Setup some generic flags we can probe on SH-4A parts */ if (((pvr >> 16) & 0xff) == 0x10) { - if ((cvr & 0x02000000) == 0) - current_cpu_data.flags |= CPU_HAS_L2_CACHE; if ((cvr & 0x10000000) == 0) - current_cpu_data.flags |= CPU_HAS_DSP; + boot_cpu_data.flags |= CPU_HAS_DSP; - current_cpu_data.flags |= CPU_HAS_LLSC; + boot_cpu_data.flags |= CPU_HAS_LLSC; } /* FPU detection works for everyone */ if ((cvr & 0x20000000) == 1) - current_cpu_data.flags |= CPU_HAS_FPU; + boot_cpu_data.flags |= CPU_HAS_FPU; /* Mask off the upper chip ID */ pvr &= 0xffff; @@ -77,140 +73,140 @@ int __init detect_cpu_and_cache_system(void) */ switch (pvr) { case 0x205: - current_cpu_data.type = CPU_SH7750; - current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + boot_cpu_data.type = CPU_SH7750; + boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x206: - current_cpu_data.type = CPU_SH7750S; - current_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | + boot_cpu_data.type = CPU_SH7750S; + boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU | CPU_HAS_PERF_COUNTER; break; case 0x1100: - current_cpu_data.type = CPU_SH7751; - current_cpu_data.flags |= CPU_HAS_FPU; + boot_cpu_data.type = CPU_SH7751; + boot_cpu_data.flags |= CPU_HAS_FPU; break; case 0x2001: case 0x2004: - current_cpu_data.type = CPU_SH7770; - current_cpu_data.icache.ways = 4; - current_cpu_data.dcache.ways = 4; + boot_cpu_data.type = CPU_SH7770; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; - current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC; + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC; break; case 0x2006: case 0x200A: if (prr == 0x61) - current_cpu_data.type = CPU_SH7781; + boot_cpu_data.type = CPU_SH7781; else - current_cpu_data.type = CPU_SH7780; + boot_cpu_data.type = CPU_SH7780; - current_cpu_data.icache.ways = 4; - current_cpu_data.dcache.ways = 4; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; - current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; case 0x3000: case 0x3003: case 0x3009: - current_cpu_data.type = CPU_SH7343; - current_cpu_data.icache.ways = 4; - current_cpu_data.dcache.ways = 4; - current_cpu_data.flags |= CPU_HAS_LLSC; + boot_cpu_data.type = CPU_SH7343; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_LLSC; break; case 0x3004: case 0x3007: - current_cpu_data.type = CPU_SH7785; - current_cpu_data.icache.ways = 4; - current_cpu_data.dcache.ways = 4; - current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + boot_cpu_data.type = CPU_SH7785; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; case 0x3008: if (prr == 0xa0) { - current_cpu_data.type = CPU_SH7722; - current_cpu_data.icache.ways = 4; - current_cpu_data.dcache.ways = 4; - current_cpu_data.flags |= CPU_HAS_LLSC; + boot_cpu_data.type = CPU_SH7722; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_LLSC; } break; case 0x4000: /* 1st cut */ case 0x4001: /* 2nd cut */ - current_cpu_data.type = CPU_SHX3; - current_cpu_data.icache.ways = 4; - current_cpu_data.dcache.ways = 4; - current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + boot_cpu_data.type = CPU_SHX3; + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | CPU_HAS_LLSC; break; case 0x8000: - current_cpu_data.type = CPU_ST40RA; - current_cpu_data.flags |= CPU_HAS_FPU; + boot_cpu_data.type = CPU_ST40RA; + boot_cpu_data.flags |= CPU_HAS_FPU; break; case 0x8100: - current_cpu_data.type = CPU_ST40GX1; - current_cpu_data.flags |= CPU_HAS_FPU; + boot_cpu_data.type = CPU_ST40GX1; + boot_cpu_data.flags |= CPU_HAS_FPU; break; case 0x700: - current_cpu_data.type = CPU_SH4_501; - current_cpu_data.icache.ways = 2; - current_cpu_data.dcache.ways = 2; + boot_cpu_data.type = CPU_SH4_501; + boot_cpu_data.icache.ways = 2; + boot_cpu_data.dcache.ways = 2; break; case 0x600: - current_cpu_data.type = CPU_SH4_202; - current_cpu_data.icache.ways = 2; - current_cpu_data.dcache.ways = 2; - current_cpu_data.flags |= CPU_HAS_FPU; + boot_cpu_data.type = CPU_SH4_202; + boot_cpu_data.icache.ways = 2; + boot_cpu_data.dcache.ways = 2; + boot_cpu_data.flags |= CPU_HAS_FPU; break; case 0x500 ... 0x501: switch (prr) { case 0x10: - current_cpu_data.type = CPU_SH7750R; + boot_cpu_data.type = CPU_SH7750R; break; case 0x11: - current_cpu_data.type = CPU_SH7751R; + boot_cpu_data.type = CPU_SH7751R; break; case 0x50 ... 0x5f: - current_cpu_data.type = CPU_SH7760; + boot_cpu_data.type = CPU_SH7760; break; } - current_cpu_data.icache.ways = 2; - current_cpu_data.dcache.ways = 2; + boot_cpu_data.icache.ways = 2; + boot_cpu_data.dcache.ways = 2; - current_cpu_data.flags |= CPU_HAS_FPU; + boot_cpu_data.flags |= CPU_HAS_FPU; break; default: - current_cpu_data.type = CPU_SH_NONE; + boot_cpu_data.type = CPU_SH_NONE; break; } #ifdef CONFIG_SH_DIRECT_MAPPED - current_cpu_data.icache.ways = 1; - current_cpu_data.dcache.ways = 1; + boot_cpu_data.icache.ways = 1; + boot_cpu_data.dcache.ways = 1; #endif #ifdef CONFIG_CPU_HAS_PTEA - current_cpu_data.flags |= CPU_HAS_PTEA; + boot_cpu_data.flags |= CPU_HAS_PTEA; #endif /* * On anything that's not a direct-mapped cache, look to the CVR * for I/D-cache specifics. */ - if (current_cpu_data.icache.ways > 1) { + if (boot_cpu_data.icache.ways > 1) { size = sizes[(cvr >> 20) & 0xf]; - current_cpu_data.icache.way_incr = (size >> 1); - current_cpu_data.icache.sets = (size >> 6); + boot_cpu_data.icache.way_incr = (size >> 1); + boot_cpu_data.icache.sets = (size >> 6); } /* And the rest of the D-cache */ - if (current_cpu_data.dcache.ways > 1) { + if (boot_cpu_data.dcache.ways > 1) { size = sizes[(cvr >> 16) & 0xf]; - current_cpu_data.dcache.way_incr = (size >> 1); - current_cpu_data.dcache.sets = (size >> 6); + boot_cpu_data.dcache.way_incr = (size >> 1); + boot_cpu_data.dcache.sets = (size >> 6); } /* @@ -218,7 +214,7 @@ int __init detect_cpu_and_cache_system(void) * * SH-4A's have an optional PIPT L2. */ - if (current_cpu_data.flags & CPU_HAS_L2_CACHE) { + if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) { /* * Size calculation is much more sensible * than it is for the L1. @@ -229,22 +225,22 @@ int __init detect_cpu_and_cache_system(void) BUG_ON(!size); - current_cpu_data.scache.way_incr = (1 << 16); - current_cpu_data.scache.entry_shift = 5; - current_cpu_data.scache.ways = 4; - current_cpu_data.scache.linesz = L1_CACHE_BYTES; + boot_cpu_data.scache.way_incr = (1 << 16); + boot_cpu_data.scache.entry_shift = 5; + boot_cpu_data.scache.ways = 4; + boot_cpu_data.scache.linesz = L1_CACHE_BYTES; - current_cpu_data.scache.entry_mask = - (current_cpu_data.scache.way_incr - - current_cpu_data.scache.linesz); + boot_cpu_data.scache.entry_mask = + (boot_cpu_data.scache.way_incr - + boot_cpu_data.scache.linesz); - current_cpu_data.scache.sets = size / - (current_cpu_data.scache.linesz * - current_cpu_data.scache.ways); + boot_cpu_data.scache.sets = size / + (boot_cpu_data.scache.linesz * + boot_cpu_data.scache.ways); - current_cpu_data.scache.way_size = - (current_cpu_data.scache.sets * - current_cpu_data.scache.linesz); + boot_cpu_data.scache.way_size = + (boot_cpu_data.scache.sets * + boot_cpu_data.scache.linesz); } return 0; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index f2286de..523f68a 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -104,7 +104,7 @@ enum { DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF, }; -static struct intc_vect vectors[] = { +static struct intc_vect vectors[] __initdata = { INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), @@ -118,7 +118,7 @@ static struct intc_vect vectors[] = { INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), }; -static struct intc_group groups[] = { +static struct intc_group groups[] __initdata = { INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI), @@ -126,20 +126,20 @@ static struct intc_group groups[] = { INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; -static struct intc_prio priorities[] = { +static struct intc_prio priorities[] __initdata = { INTC_PRIO(SCIF, 3), INTC_PRIO(SCI1, 3), INTC_PRIO(DMAC, 7), }; -static struct intc_prio_reg prio_registers[] = { - { 0xffd00004, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, - { 0xffd00008, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } }, - { 0xffd0000c, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } }, - { 0xffd00010, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, - { 0xfe080000, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0, - TMU4, TMU3, - PCIC1, PCIC0_PCISERR } }, +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, + { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } }, + { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, SCIF, HUDI } }, + { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, + { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { 0, 0, 0, 0, + TMU4, TMU3, + PCIC1, PCIC0_PCISERR } }, }; static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, @@ -150,13 +150,13 @@ static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) -static struct intc_vect vectors_dma4[] = { +static struct intc_vect vectors_dma4[] __initdata = { INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), INTC_VECT(DMAC_DMAE, 0x6c0), }; -static struct intc_group groups_dma4[] = { +static struct intc_group groups_dma4[] __initdata = { INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, DMAC_DMAE), }; @@ -168,7 +168,7 @@ static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4", /* SH7750R and SH7751R both have 8-channel DMA controllers */ #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R) -static struct intc_vect vectors_dma8[] = { +static struct intc_vect vectors_dma8[] __initdata = { INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), @@ -176,7 +176,7 @@ static struct intc_vect vectors_dma8[] = { INTC_VECT(DMAC_DMAE, 0x6c0), }; -static struct intc_group groups_dma8[] = { +static struct intc_group groups_dma8[] __initdata = { INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), @@ -191,11 +191,11 @@ static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8", #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) -static struct intc_vect vectors_tmu34[] = { +static struct intc_vect vectors_tmu34[] __initdata = { INTC_VECT(TMU3, 0xb00), INTC_VECT(TMU4, 0xb80), }; -static struct intc_mask_reg mask_registers[] = { +static struct intc_mask_reg mask_registers[] __initdata = { { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, TMU4, TMU3, @@ -210,7 +210,7 @@ static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34", #endif /* SH7750S, SH7750R, SH7751 and SH7751R all have IRLM priority registers */ -static struct intc_vect vectors_irlm[] = { +static struct intc_vect vectors_irlm[] __initdata = { INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360), }; @@ -220,14 +220,14 @@ static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL, /* SH7751 and SH7751R both have PCI */ #if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R) -static struct intc_vect vectors_pci[] = { +static struct intc_vect vectors_pci[] __initdata = { INTC_VECT(PCIC0_PCISERR, 0xa00), INTC_VECT(PCIC1_PCIERR, 0xae0), INTC_VECT(PCIC1_PCIPWDWN, 0xac0), INTC_VECT(PCIC1_PCIPWON, 0xaa0), INTC_VECT(PCIC1_PCIDMA0, 0xa80), INTC_VECT(PCIC1_PCIDMA1, 0xa60), INTC_VECT(PCIC1_PCIDMA2, 0xa40), INTC_VECT(PCIC1_PCIDMA3, 0xa20), }; -static struct intc_group groups_pci[] = { +static struct intc_group groups_pci[] __initdata = { INTC_GROUP(PCIC1, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON, PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3), }; @@ -282,13 +282,19 @@ void __init plat_irq_setup(void) #define INTC_ICR 0xffd00000UL #define INTC_ICR_IRLM (1<<7) -/* enable individual interrupt mode for external interupts */ -void __init ipr_irq_enable_irlm(void) +void __init plat_irq_setup_pins(int mode) { #if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7091) BUG(); /* impossible to mask interrupts on SH7750 and SH7091 */ + return; #endif - register_intc_controller(&intc_desc_irlm); - ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + switch (mode) { + case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */ + ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); + register_intc_controller(&intc_desc_irlm); + break; + default: + BUG(); + } } diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 47fa270..7a898cb 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -12,6 +12,136 @@ #include <linux/serial.h> #include <asm/sci.h> +enum { + UNUSED = 0, + + /* interrupt sources */ + IRL0, IRL1, IRL2, IRL3, + HUDI, GPIOI, + DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3, + DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7, + DMAC_DMAE, + IRQ4, IRQ5, IRQ6, IRQ7, + HCAN20, HCAN21, + SSI0, SSI1, + HAC0, HAC1, + I2C0, I2C1, + USB, LCDC, + DMABRG0, DMABRG1, DMABRG2, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI, + HSPI, + MMCIF0, MMCIF1, MMCIF2, MMCIF3, + MFI, ADC, CMT, + TMU0, TMU1, TMU2_TUNI, TMU2_TICPI, + WDT, + REF_RCMI, REF_ROVI, + + /* interrupt groups */ + DMAC, DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, TMU2, REF, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620), + INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660), + INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0), + INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0), + INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0), + INTC_VECT(DMAC_DMAE, 0x6c0), + INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820), + INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860), + INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920), + INTC_VECT(SSI0, 0x940), INTC_VECT(SSI1, 0x960), + INTC_VECT(HAC0, 0x980), INTC_VECT(HAC1, 0x9a0), + INTC_VECT(I2C0, 0x9c0), INTC_VECT(I2C1, 0x9e0), + INTC_VECT(USB, 0xa00), INTC_VECT(LCDC, 0xa20), + INTC_VECT(DMABRG0, 0xa80), INTC_VECT(DMABRG1, 0xaa0), + INTC_VECT(DMABRG2, 0xac0), + INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), + INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0), + INTC_VECT(SCIF1_ERI, 0xb00), INTC_VECT(SCIF1_RXI, 0xb20), + INTC_VECT(SCIF1_BRI, 0xb40), INTC_VECT(SCIF1_TXI, 0xb60), + INTC_VECT(SCIF2_ERI, 0xb80), INTC_VECT(SCIF2_RXI, 0xba0), + INTC_VECT(SCIF2_BRI, 0xbc0), INTC_VECT(SCIF2_TXI, 0xbe0), + INTC_VECT(SIM_ERI, 0xc00), INTC_VECT(SIM_RXI, 0xc20), + INTC_VECT(SIM_TXI, 0xc40), INTC_VECT(SIM_TEI, 0xc60), + INTC_VECT(HSPI, 0xc80), + INTC_VECT(MMCIF0, 0xd00), INTC_VECT(MMCIF1, 0xd20), + INTC_VECT(MMCIF2, 0xd40), INTC_VECT(MMCIF3, 0xd60), + INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */ + INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), + INTC_VECT(WDT, 0x560), + INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, + DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5, + DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE), + INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), + INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI), + INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3), + INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI), + INTC_GROUP(REF, REF_RCMI, REF_ROVI), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SIM, 3), + INTC_PRIO(DMAC, 7), + INTC_PRIO(DMABRG, 13), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */ + { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21, + SSI0, SSI1, HAC0, HAC1, I2C0, I2C1, USB, LCDC, + 0, DMABRG0, DMABRG1, DMABRG2, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, } }, + { 0xfe080044, 0xfe080064, 32, /* INTMSK04 / INTMSKCLR04 */ + { 0, 0, 0, 0, 0, 0, 0, 0, + SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI, + HSPI, MMCIF0, MMCIF1, MMCIF2, + MMCIF3, 0, 0, 0, 0, 0, 0, 0, + 0, MFI, 0, 0, 0, 0, ADC, CMT, } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } }, + { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, + { 0xffd0000c, 0, 16, 4, /* IPRC */ { GPIOI, DMAC, 0, HUDI } }, + { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } }, + { 0xfe080000, 0, 32, 4, /* INTPRI00 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfe080004, 0, 32, 4, /* INTPRI04 */ { HCAN20, HCAN21, SSI0, SSI1, + HAC0, HAC1, I2C0, I2C1 } }, + { 0xfe080008, 0, 32, 4, /* INTPRI08 */ { USB, LCDC, DMABRG, SCIF0, + SCIF1, SCIF2, SIM, HSPI } }, + { 0xfe08000c, 0, 32, 4, /* INTPRI0C */ { 0, 0, MMCIF, 0, + MFI, 0, ADC, CMT } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups, + priorities, mask_registers, prio_registers, NULL); + +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), + INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360), +}; + +static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups, + priorities, mask_registers, prio_registers, NULL); + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xfe600000, @@ -29,6 +159,11 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, }, { + .mapbase = 0xfe480000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 80, 81, 82, 0 }, + }, { .flags = 0, } }; @@ -52,114 +187,18 @@ static int __init sh7760_devices_setup(void) } __initcall(sh7760_devices_setup); -static struct intc2_data intc2_irq_table[] = { - {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ - {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ - {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ - {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ - {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ - {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ - {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ - {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ - {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ - {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ - {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ - {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ - {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ - {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ - {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ - {65, 8, 24, 0, 16, 3}, /* LCDC */ - {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ - {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ - {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ - {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ - {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ - {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ - {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ - {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ - {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ - {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ - {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ - {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ - {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ - {84, 8, 0, 4, 19, 3}, /* HSPII */ - {88, 12, 20, 4, 18, 3}, /* MMCI0 */ - {89, 12, 20, 4, 17, 3}, /* MMCI1 */ - {90, 12, 20, 4, 16, 3}, /* MMCI2 */ - {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI */ - {108,12, 4, 4, 1, 3}, /* ADC */ - {109,12, 0, 4, 0, 3}, /* CMTI */ -}; - -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0xfe080000, - .msk_base = 0xfe080040, - .mskclr_base = 0xfe080060, - - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), - - .chip = { - .name = "INTC2-sh7760", - }, -}; - -static struct ipr_data ipr_irq_table[] = { - /* IRQ, IPR-idx, shift, priority */ - { 16, 0, 12, 2 }, /* TMU0 TUNI*/ - { 17, 0, 8, 2 }, /* TMU1 TUNI */ - { 18, 0, 4, 2 }, /* TMU2 TUNI */ - { 19, 0, 4, 2 }, /* TMU2 TIPCI */ - { 27, 1, 12, 2 }, /* WDT ITI */ - { 28, 1, 8, 2 }, /* REF RCMI */ - { 29, 1, 8, 2 }, /* REF ROVI */ - { 32, 2, 0, 7 }, /* HUDI */ - { 33, 2, 12, 7 }, /* GPIOI */ - { 34, 2, 8, 7 }, /* DMAC DMTE0 */ - { 35, 2, 8, 7 }, /* DMAC DMTE1 */ - { 36, 2, 8, 7 }, /* DMAC DMTE2 */ - { 37, 2, 8, 7 }, /* DMAC DMTE3 */ - { 38, 2, 8, 7 }, /* DMAC DMAE */ - { 44, 2, 8, 7 }, /* DMAC DMTE4 */ - { 45, 2, 8, 7 }, /* DMAC DMTE5 */ - { 46, 2, 8, 7 }, /* DMAC DMTE6 */ - { 47, 2, 8, 7 }, /* DMAC DMTE7 */ -/* these here are only valid if INTC_ICR bit 7 is set to 1! - * XXX: maybe CONFIG_SH_IRLMODE symbol? SH7751 could use it too */ -#if 0 - { 2, 3, 12, 3 }, /* IRL0 */ - { 5, 3, 8, 3 }, /* IRL1 */ - { 8, 3, 4, 3 }, /* IRL2 */ - { 11, 3, 0, 3 }, /* IRL3 */ -#endif -}; - -static unsigned long ipr_offsets[] = { - 0xffd00004UL, /* 0: IPRA */ - 0xffd00008UL, /* 1: IPRB */ - 0xffd0000cUL, /* 2: IPRC */ - 0xffd00010UL, /* 3: IPRD */ -}; - -static struct ipr_desc ipr_irq_desc = { - .ipr_offsets = ipr_offsets, - .nr_offsets = ARRAY_SIZE(ipr_offsets), - - .ipr_data = ipr_irq_table, - .nr_irqs = ARRAY_SIZE(ipr_irq_table), - - .chip = { - .name = "IPR-sh7760", - }, -}; +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + register_intc_controller(&intc_desc_irq); + break; + default: + BUG(); + } +} void __init plat_irq_setup(void) { - register_intc2_controller(&intc2_irq_desc); - register_ipr_controller(&ipr_irq_desc); + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index c21512c..b22a78c 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -58,11 +58,11 @@ do { \ */ void sq_flush_range(unsigned long start, unsigned int len) { - volatile unsigned long *sq = (unsigned long *)start; + unsigned long *sq = (unsigned long *)start; /* Flush the queues */ for (len >>= 5; len--; sq += 8) - prefetchw((void *)sq); + prefetchw(sq); /* Wait for completion */ store_queue_barrier(); diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index e6a1fb5..2453987 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -10,6 +10,9 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o +# SMP setup +smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o + # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o @@ -18,4 +21,5 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o -obj-y += $(clock-y) +obj-y += $(clock-y) +obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 91d61cf..c0a3f07 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -41,3 +41,7 @@ static int __init sh7343_devices_setup(void) ARRAY_SIZE(sh7343_devices)); } __initcall(sh7343_devices_setup); + +void __init plat_irq_setup(void) +{ +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 25b913e..55f6610 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -84,7 +84,7 @@ enum { SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI, }; -static struct intc_vect vectors[] = { +static struct intc_vect vectors[] __initdata = { INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), @@ -117,7 +117,7 @@ static struct intc_vect vectors[] = { INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580), }; -static struct intc_group groups[] = { +static struct intc_group groups[] __initdata = { INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI), INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3), @@ -130,7 +130,7 @@ static struct intc_group groups[] = { INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), }; -static struct intc_prio priorities[] = { +static struct intc_prio priorities[] __initdata = { INTC_PRIO(SCIF0, 3), INTC_PRIO(SCIF1, 3), INTC_PRIO(SCIF2, 3), @@ -138,7 +138,7 @@ static struct intc_prio priorities[] = { INTC_PRIO(TMU1, 2), }; -static struct intc_mask_reg mask_registers[] = { +static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */ { } }, { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ @@ -168,24 +168,24 @@ static struct intc_mask_reg mask_registers[] = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_prio_reg prio_registers[] = { - { 0xa4080000, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } }, - { 0xa4080004, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, - { 0xa4080008, 16, 4, /* IPRC */ { } }, - { 0xa408000c, 16, 4, /* IPRD */ { } }, - { 0xa4080010, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } }, - { 0xa4080014, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, - { 0xa4080018, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } }, - { 0xa408001c, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } }, - { 0xa4080020, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } }, - { 0xa4080024, 16, 4, /* IPRJ */ { 0, 0, SIU } }, - { 0xa4080028, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } }, - { 0xa408002c, 16, 4, /* IPRL */ { TWODG, 0, TPU } }, - { 0xa4140010, 32, 4, /* INTPRI00 */ +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, IRDA } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, + { 0xa4080008, 0, 16, 4, /* IPRC */ { } }, + { 0xa408000c, 0, 16, 4, /* IPRD */ { } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, 0, VPU } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, SCIF2 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, RTC } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { 0, 0, SIU } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, 0, 0, SDHI } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { TWODG, 0, TPU } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_sense_reg sense_registers[] = { +static struct intc_sense_reg sense_registers[] __initdata = { { 0xa414001c, 16, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 6a04cc5..32f4f59 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -51,3 +51,7 @@ static int __init sh7770_devices_setup(void) ARRAY_SIZE(sh7770_devices)); } __initcall(sh7770_devices_setup); + +void __init plat_irq_setup(void) +{ +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index a4127ec..e8fd33f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -10,6 +10,7 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/serial.h> +#include <linux/io.h> #include <asm/sci.h> static struct resource rtc_resources[] = { @@ -114,7 +115,7 @@ enum { PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO, }; -static struct intc_vect vectors[] = { +static struct intc_vect vectors[] __initdata = { INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), INTC_VECT(WDT, 0x560), @@ -150,7 +151,7 @@ static struct intc_vect vectors[] = { INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), }; -static struct intc_group groups[] = { +static struct intc_group groups[] __initdata = { INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, @@ -167,12 +168,12 @@ static struct intc_group groups[] = { INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; -static struct intc_prio priorities[] = { +static struct intc_prio priorities[] __initdata = { INTC_PRIO(SCIF0, 3), INTC_PRIO(SCIF1, 3), }; -static struct intc_mask_reg mask_registers[] = { +static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ { 0, 0, 0, 0, 0, 0, GPIO, FLCTL, SSI, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB, @@ -180,16 +181,18 @@ static struct intc_mask_reg mask_registers[] = { HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } }, }; -static struct intc_prio_reg prio_registers[] = { - { 0xffd40000, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, TMU2, TMU2_TICPI } }, - { 0xffd40004, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } }, - { 0xffd40008, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } }, - { 0xffd4000c, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } }, - { 0xffd40010, 32, 8, /* INT2PRI4 */ { CMT, HAC, PCISERR, PCIINTA, } }, - { 0xffd40014, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC, - PCIINTD, PCIC5 } }, - { 0xffd40018, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } }, - { 0xffd4001c, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } }, +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, + TMU2, TMU2_TICPI } }, + { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } }, + { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } }, + { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC0, DMAC1 } }, + { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC, + PCISERR, PCIINTA, } }, + { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC, + PCIINTD, PCIC5 } }, + { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF, HSPI, MMCIF, SSI } }, + { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } }, }; static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, priorities, @@ -197,24 +200,24 @@ static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, priorities, /* Support for external interrupt pins in IRQ mode */ -static struct intc_vect irq_vectors[] = { +static struct intc_vect irq_vectors[] __initdata = { INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), }; -static struct intc_mask_reg irq_mask_registers[] = { +static struct intc_mask_reg irq_mask_registers[] __initdata = { { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_prio_reg irq_prio_registers[] = { - { 0xffd00010, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, - IRQ4, IRQ5, IRQ6, IRQ7 } }, +static struct intc_prio_reg irq_prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static struct intc_sense_reg irq_sense_registers[] = { +static struct intc_sense_reg irq_sense_registers[] __initdata = { { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; @@ -225,7 +228,7 @@ static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, /* External interrupt pins in IRL mode */ -static struct intc_vect irl_vectors[] = { +static struct intc_vect irl_vectors[] __initdata = { INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), @@ -236,16 +239,16 @@ static struct intc_vect irl_vectors[] = { INTC_VECT(IRL_HHHL, 0x3c0), }; -static struct intc_mask_reg irl3210_mask_registers[] = { - { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */ +static struct intc_mask_reg irl3210_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, }; -static struct intc_mask_reg irl7654_mask_registers[] = { - { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */ +static struct intc_mask_reg irl7654_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, @@ -259,8 +262,28 @@ static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors, static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors, NULL, NULL, irl3210_mask_registers, NULL, NULL); +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + void __init plat_irq_setup(void) { + /* disable IRQ7-0 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + /* disable holding function, ie enable "SH-4 Mode" */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0); + register_intc_controller(&intc_desc); } @@ -268,12 +291,28 @@ void __init plat_irq_setup_pins(int mode) { switch (mode) { case IRQ_MODE_IRQ: + /* select IRQ mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0); register_intc_controller(&intc_irq_desc); break; case IRQ_MODE_IRL7654: - register_intc_controller(&intc_irl7654_desc); + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); break; case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl7654_desc); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); register_intc_controller(&intc_irl3210_desc); break; default: diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index cf04756..39b215d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -10,6 +10,9 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/serial.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <asm/mmzone.h> #include <asm/sci.h> static struct plat_sci_port sci_platform_data[] = { @@ -72,46 +75,281 @@ static int __init sh7785_devices_setup(void) } __initcall(sh7785_devices_setup); -static struct intc2_data intc2_irq_table[] = { - { 28, 0, 24, 0, 0, 2 }, /* TMU0 */ - - { 40, 8, 24, 0, 2, 3 }, /* SCIF0 ERI */ - { 41, 8, 24, 0, 2, 3 }, /* SCIF0 RXI */ - { 42, 8, 24, 0, 2, 3 }, /* SCIF0 BRI */ - { 43, 8, 24, 0, 2, 3 }, /* SCIF0 TXI */ - - { 44, 8, 16, 0, 3, 3 }, /* SCIF1 ERI */ - { 45, 8, 16, 0, 3, 3 }, /* SCIF1 RXI */ - { 46, 8, 16, 0, 3, 3 }, /* SCIF1 BRI */ - { 47, 8, 16, 0, 3, 3 }, /* SCIF1 TXI */ - - { 64, 0x14, 8, 0, 14, 2 }, /* PCIC0 */ - { 65, 0x14, 0, 0, 15, 2 }, /* PCIC1 */ - { 66, 0x18, 24, 0, 16, 2 }, /* PCIC2 */ - { 67, 0x18, 16, 0, 17, 2 }, /* PCIC3 */ - { 68, 0x18, 8, 0, 18, 2 }, /* PCIC4 */ - - { 60, 8, 8, 0, 4, 3 }, /* SCIF2 ERI, RXI, BRI, TXI */ - { 60, 8, 0, 0, 5, 3 }, /* SCIF3 ERI, RXI, BRI, TXI */ - { 60, 12, 24, 0, 6, 3 }, /* SCIF4 ERI, RXI, BRI, TXI */ - { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */ +enum { + UNUSED = 0, + + /* interrupt sources */ + + IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, + + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + WDT, + TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, + DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9, + DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE, + HSPI, + SCIF2, SCIF3, SCIF4, SCIF5, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, + PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, + SIOF, + MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, + DU, + GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI, + TMU3, TMU4, TMU5, + SSI0, SSI1, + HAC0, HAC1, + FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1, + GPIOI0, GPIOI1, GPIOI2, GPIOI3, + + /* interrupt groups */ + + TMU012, DMAC0, SCIF0, SCIF1, DMAC1, + PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO }; -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0xffd40000, - .msk_base = 0xffd40038, - .mskclr_base = 0xffd4003c, +static struct intc_vect vectors[] __initdata = { + INTC_VECT(WDT, 0x560), + INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0), + INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0), + INTC_VECT(HUDI, 0x600), + INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640), + INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680), + INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0), + INTC_VECT(DMAC0_DMAE, 0x6e0), + INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), + INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), + INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), + INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), + INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0), + INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0), + INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920), + INTC_VECT(DMAC1_DMAE, 0x940), + INTC_VECT(HSPI, 0x960), + INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0), + INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0), + INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), + INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), + INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), + INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(SIOF, 0xc00), + INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), + INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), + INTC_VECT(DU, 0xd80), + INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0), + INTC_VECT(GDTA_GAERI, 0xde0), + INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), + INTC_VECT(TMU5, 0xe40), + INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), + INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0), + INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20), + INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60), + INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0), + INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0), +}; - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), + INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, + DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE), + INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), + INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), + INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI), + INTC_GROUP(TMU345, TMU3, TMU4, TMU5), + INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND, + FLCTL_FLTRQ0, FLCTL_FLTRQ1), + INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), +}; - .chip = { - .name = "INTC2-sh7785", - }, +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF3, 3), + INTC_PRIO(SCIF4, 3), + INTC_PRIO(SCIF5, 3), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, + + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH, + IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH, + IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH, + IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0, + IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH, + IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH, + IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH, + IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } }, + + { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ + { 0, 0, 0, GDTA, DU, SSI0, SSI1, GPIO, + FLCTL, MMCIF, HSPI, SIOF, PCIC5, PCIINTD, PCIINTC, PCIINTB, + PCIINTA, PCISERR, HAC1, HAC0, DMAC1, DMAC0, HUDI, WDT, + SCIF5, SCIF4, SCIF3, SCIF2, SCIF1, SCIF0, TMU345, TMU012 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, + TMU2, TMU2_TICPI } }, + { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, } }, + { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, + SCIF2, SCIF3 } }, + { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { SCIF4, SCIF5, WDT, } }, + { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { HUDI, DMAC0, DMAC1, } }, + { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { HAC0, HAC1, + PCISERR, PCIINTA } }, + { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { PCIINTB, PCIINTC, + PCIINTD, PCIC5 } }, + { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SIOF, HSPI, MMCIF, } }, + { 0xffd40020, 0, 32, 8, /* INT2PRI8 */ { FLCTL, GPIO, SSI0, SSI1, } }, + { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } }, }; +static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, priorities, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ + +static struct intc_vect vectors_irq0123[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), +}; + +static struct intc_vect vectors_irq4567[] __initdata = { + INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), + INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, + NULL, NULL, mask_registers, prio_registers, + sense_registers); + +static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, + NULL, NULL, mask_registers, prio_registers, + sense_registers); + +/* External interrupt pins in IRL mode */ + +static struct intc_vect vectors_irl0123[] __initdata = { + INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220), + INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260), + INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0), + INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0), + INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320), + INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360), + INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0), + INTC_VECT(IRL0_HHHL, 0x3c0), +}; + +static struct intc_vect vectors_irl4567[] __initdata = { + INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20), + INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60), + INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0), + INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0), + INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20), + INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60), + INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0), + INTC_VECT(IRL4_HHHL, 0xcc0), +}; + +static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123, + NULL, NULL, mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567, + NULL, NULL, mask_registers, NULL, NULL); + +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + void __init plat_irq_setup(void) { - register_intc2_controller(&intc2_irq_desc); + /* disable IRQ3-0 + IRQ7-4 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + /* select IRL mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0); + + /* disable holding function, ie enable "SH-4 Mode" */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0); + + register_intc_controller(&intc_desc); +} + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ7654: + /* select IRQ mode for IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0); + register_intc_controller(&intc_desc_irq4567); + break; + case IRQ_MODE_IRQ3210: + /* select IRQ mode for IRL3-0 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0); + register_intc_controller(&intc_desc_irq0123); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl4567); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_desc_irl0123); + break; + default: + BUG(); + } } +void __init plat_mem_setup(void) +{ + /* Register the URAM space as Node 1 */ + setup_bootmem_node(1, 0xe55f0000, 0xe5610000); +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 704c064..c6cdd7e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/io.h> +#include <asm/mmzone.h> #include <asm/sci.h> static struct plat_sci_port sci_platform_data[] = { @@ -58,28 +59,229 @@ static int __init shx3_devices_setup(void) } __initcall(shx3_devices_setup); -static struct intc2_data intc2_irq_table[] = { - { 16, 0, 0, 0, 1, 2 }, /* TMU0 */ - { 40, 4, 0, 0x20, 0, 3 }, /* SCIF0 ERI */ - { 41, 4, 0, 0x20, 1, 3 }, /* SCIF0 RXI */ - { 42, 4, 0, 0x20, 2, 3 }, /* SCIF0 BRI */ - { 43, 4, 0, 0x20, 3, 3 }, /* SCIF0 TXI */ +enum { + UNUSED = 0, + + /* interrupt sources */ + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, + IRQ0, IRQ1, IRQ2, IRQ3, + HUDII, + TMU0, TMU1, TMU2, TMU3, TMU4, TMU5, + PCII0, PCII1, PCII2, PCII3, PCII4, + PCII5, PCII6, PCII7, PCII8, PCII9, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, + DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE, + DU, + DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9, + DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE, + IIC, VIN0, VIN1, VCORE0, ATAPI, + DTU0_TEND, DTU0_AE, DTU0_TMISS, + DTU1_TEND, DTU1_AE, DTU1_TMISS, + DTU2_TEND, DTU2_AE, DTU2_TMISS, + DTU3_TEND, DTU3_AE, DTU3_TMISS, + FE0, FE1, + GPIO0, GPIO1, GPIO2, GPIO3, + PAM, IRM, + INTICI0, INTICI1, INTICI2, INTICI3, + INTICI4, INTICI5, INTICI6, INTICI7, + + /* interrupt groups */ + IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3, + DMAC0, DMAC1, DTU0, DTU1, DTU2, DTU3, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(HUDII, 0x3e0), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), INTC_VECT(TMU3, 0x460), + INTC_VECT(TMU4, 0x480), INTC_VECT(TMU5, 0x4a0), + INTC_VECT(PCII0, 0x500), INTC_VECT(PCII1, 0x520), + INTC_VECT(PCII2, 0x540), INTC_VECT(PCII3, 0x560), + INTC_VECT(PCII4, 0x580), INTC_VECT(PCII5, 0x5a0), + INTC_VECT(PCII6, 0x5c0), INTC_VECT(PCII7, 0x5e0), + INTC_VECT(PCII8, 0x600), INTC_VECT(PCII9, 0x620), + INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), + INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), + INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0), + INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0), + INTC_VECT(SCIF2_ERI, 0x800), INTC_VECT(SCIF2_RXI, 0x820), + INTC_VECT(SCIF2_BRI, 0x840), INTC_VECT(SCIF2_TXI, 0x860), + INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0), + INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0), + INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920), + INTC_VECT(DMAC0_DMINT2, 0x940), INTC_VECT(DMAC0_DMINT3, 0x960), + INTC_VECT(DMAC0_DMINT4, 0x980), INTC_VECT(DMAC0_DMINT5, 0x9a0), + INTC_VECT(DMAC0_DMAE, 0x9c0), + INTC_VECT(DU, 0x9e0), + INTC_VECT(DMAC1_DMINT6, 0xa00), INTC_VECT(DMAC1_DMINT7, 0xa20), + INTC_VECT(DMAC1_DMINT8, 0xa40), INTC_VECT(DMAC1_DMINT9, 0xa60), + INTC_VECT(DMAC1_DMINT10, 0xa80), INTC_VECT(DMAC1_DMINT11, 0xaa0), + INTC_VECT(DMAC1_DMAE, 0xac0), + INTC_VECT(IIC, 0xae0), + INTC_VECT(VIN0, 0xb00), INTC_VECT(VIN1, 0xb20), + INTC_VECT(VCORE0, 0xb00), INTC_VECT(ATAPI, 0xb60), + INTC_VECT(DTU0_TEND, 0xc00), INTC_VECT(DTU0_AE, 0xc20), + INTC_VECT(DTU0_TMISS, 0xc40), + INTC_VECT(DTU1_TEND, 0xc60), INTC_VECT(DTU1_AE, 0xc80), + INTC_VECT(DTU1_TMISS, 0xca0), + INTC_VECT(DTU2_TEND, 0xcc0), INTC_VECT(DTU2_AE, 0xce0), + INTC_VECT(DTU2_TMISS, 0xd00), + INTC_VECT(DTU3_TEND, 0xd20), INTC_VECT(DTU3_AE, 0xd40), + INTC_VECT(DTU3_TMISS, 0xd60), + INTC_VECT(FE0, 0xe00), INTC_VECT(FE1, 0xe20), + INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60), + INTC_VECT(GPIO2, 0xe80), INTC_VECT(GPIO3, 0xea0), + INTC_VECT(PAM, 0xec0), INTC_VECT(IRM, 0xee0), + INTC_VECT(INTICI0, 0xf00), INTC_VECT(INTICI1, 0xf20), + INTC_VECT(INTICI2, 0xf40), INTC_VECT(INTICI3, 0xf60), + INTC_VECT(INTICI4, 0xf80), INTC_VECT(INTICI5, 0xfa0), + INTC_VECT(INTICI6, 0xfc0), INTC_VECT(INTICI7, 0xfe0), }; -static struct intc2_desc intc2_irq_desc __read_mostly = { - .prio_base = 0xfe410000, - .msk_base = 0xfe410820, - .mskclr_base = 0xfe410850, +static struct intc_group groups[] __initdata = { + INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL), + INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), + INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI), + INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), + INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, + DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11), + INTC_GROUP(DTU0, DTU0_TEND, DTU0_AE, DTU0_TMISS), + INTC_GROUP(DTU1, DTU1_TEND, DTU1_AE, DTU1_TMISS), + INTC_GROUP(DTU2, DTU2_TEND, DTU2_AE, DTU2_TMISS), + INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS), +}; - .intc2_data = intc2_irq_table, - .nr_irqs = ARRAY_SIZE(intc2_irq_table), +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), + INTC_PRIO(SCIF3, 3), +}; - .chip = { - .name = "INTC2-SHX3", - }, +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfe410040, 0xfe410060, 32, /* CnINTMSK1 / CnINTMSKCLR1 */ + { IRL } }, + { 0xfe410820, 0xfe410850, 32, /* CnINT2MSK0 / CnINT2MSKCLR0 */ + { FE1, FE0, 0, ATAPI, VCORE0, VIN1, VIN0, IIC, + DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, /* HUDI bits ignored */ + 0, TMU5, TMU4, TMU3, TMU2, TMU1, TMU0, 0, } }, + { 0xfe410830, 0xfe410860, 32, /* CnINT2MSK1 / CnINT2MSKCLR1 */ + { 0, 0, 0, 0, DTU3, DTU2, DTU1, DTU0, /* IRM bits ignored */ + PCII9, PCII8, PCII7, PCII6, PCII5, PCII4, PCII3, PCII2, + PCII1, PCII0, DMAC1_DMAE, DMAC1_DMINT11, + DMAC1_DMINT10, DMAC1_DMINT9, DMAC1_DMINT8, DMAC1_DMINT7, + DMAC1_DMINT6, DMAC0_DMAE, DMAC0_DMINT5, DMAC0_DMINT4, + DMAC0_DMINT3, DMAC0_DMINT2, DMAC0_DMINT1, DMAC0_DMINT0 } }, + { 0xfe410840, 0xfe410870, 32, /* CnINT2MSK2 / CnINT2MSKCLR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + SCIF3_TXI, SCIF3_BRI, SCIF3_RXI, SCIF3_ERI, + SCIF2_TXI, SCIF2_BRI, SCIF2_RXI, SCIF2_ERI, + SCIF1_TXI, SCIF1_BRI, SCIF1_RXI, SCIF1_ERI, + SCIF0_TXI, SCIF0_BRI, SCIF0_RXI, SCIF0_ERI } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + + { 0xfe410800, 0, 32, 4, /* INT2PRI0 */ { 0, HUDII, TMU5, TMU4, + TMU3, TMU2, TMU1, TMU0 } }, + { 0xfe410804, 0, 32, 4, /* INT2PRI1 */ { DTU3, DTU2, DTU1, DTU0, + SCIF3, SCIF2, + SCIF1, SCIF0 } }, + { 0xfe410808, 0, 32, 4, /* INT2PRI2 */ { DMAC1, DMAC0, + PCII56789, PCII4, + PCII3, PCII2, + PCII1, PCII0 } }, + { 0xfe41080c, 0, 32, 4, /* INT2PRI3 */ { FE1, FE0, ATAPI, VCORE0, + VIN1, VIN0, IIC, DU} }, + { 0xfe410810, 0, 32, 4, /* INT2PRI4 */ { 0, 0, PAM, GPIO3, + GPIO2, GPIO1, GPIO0, IRM } }, + { 0xfe410090, 0xfe4100a0, 32, 4, /* CnICIPRI / CnICIPRICLR */ + { INTICI7, INTICI6, INTICI5, INTICI4, + INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) }, +}; + +static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, priorities, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ +static struct intc_vect vectors_irq[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, }; +static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups, + priorities, mask_registers, prio_registers, + sense_registers); + +/* External interrupt pins in IRL mode */ +static struct intc_vect vectors_irl[] __initdata = { + INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), + INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), + INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), + INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0), + INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320), + INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360), + INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0), + INTC_VECT(IRL_HHHL, 0x3c0), +}; + +static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups, + priorities, mask_registers, prio_registers, NULL); + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + register_intc_controller(&intc_desc_irq); + break; + case IRQ_MODE_IRL3210: + register_intc_controller(&intc_desc_irl); + break; + default: + BUG(); + } +} + void __init plat_irq_setup(void) { - register_intc2_controller(&intc2_irq_desc); + register_intc_controller(&intc_desc); +} + +void __init plat_mem_setup(void) +{ + unsigned int nid = 1; + + /* Register CPU#0 URAM space as Node 1 */ + setup_bootmem_node(nid++, 0x145f0000, 0x14610000); /* CPU0 */ + +#if 0 + /* XXX: Not yet.. */ + setup_bootmem_node(nid++, 0x14df0000, 0x14e10000); /* CPU1 */ + setup_bootmem_node(nid++, 0x155f0000, 0x15610000); /* CPU2 */ + setup_bootmem_node(nid++, 0x15df0000, 0x15e10000); /* CPU3 */ +#endif + + setup_bootmem_node(nid++, 0x16000000, 0x16020000); /* CSM */ } diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c new file mode 100644 index 0000000..e5e0684 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c @@ -0,0 +1,120 @@ +/* + * SH-X3 SMP + * + * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/cpumask.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +void __init plat_smp_setup(void) +{ + unsigned int cpu = 0; + int i, num; + + cpus_clear(cpu_possible_map); + cpu_set(cpu, cpu_possible_map); + + __cpu_number_map[0] = 0; + __cpu_logical_map[0] = 0; + + /* + * Do this stupidly for now.. we don't have an easy way to probe + * for the total number of cores. + */ + for (i = 1, num = 0; i < NR_CPUS; i++) { + cpu_set(i, cpu_possible_map); + __cpu_number_map[i] = ++num; + __cpu_logical_map[num] = i; + } + + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); +} + +void __init plat_prepare_cpus(unsigned int max_cpus) +{ +} + +#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12)) +#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12)) + +#define STBCR_MSTP 0x00000001 +#define STBCR_RESET 0x00000002 +#define STBCR_LTSLP 0x80000000 + +#define STBCR_AP_VAL (STBCR_RESET | STBCR_LTSLP) + +void plat_start_cpu(unsigned int cpu, unsigned long entry_point) +{ + ctrl_outl(entry_point, RESET_REG(cpu)); + + if (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP)) + ctrl_outl(STBCR_MSTP, STBCR_REG(cpu)); + + while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP)) + ; + + /* Start up secondary processor by sending a reset */ + ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu)); +} + +int plat_smp_processor_id(void) +{ + return ctrl_inl(0xff000048); /* CPIDR */ +} + +void plat_send_ipi(unsigned int cpu, unsigned int message) +{ + unsigned long addr = 0xfe410070 + (cpu * 4); + + BUG_ON(cpu >= 4); + BUG_ON(message >= SMP_MSG_NR); + + ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */ +} + +struct ipi_data { + void (*handler)(void *); + void *arg; + unsigned int message; +}; + +static irqreturn_t ipi_interrupt_handler(int irq, void *arg) +{ + struct ipi_data *id = arg; + unsigned int cpu = hard_smp_processor_id(); + unsigned int offs = 4 * cpu; + unsigned int x; + + x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */ + x &= (1 << (id->message << 2)); + ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */ + + id->handler(id->arg); + + return IRQ_HANDLED; +} + +static struct ipi_data ipi_handlers[SMP_MSG_NR]; + +int plat_register_ipi_handler(unsigned int message, + void (*handler)(void *), void *arg) +{ + struct ipi_data *id = &ipi_handlers[message]; + + BUG_ON(SMP_MSG_NR >= 8); + BUG_ON(message >= SMP_MSG_NR); + + id->handler = handler; + id->arg = arg; + id->message = message; + + return request_irq(104 + message, ipi_interrupt_handler, 0, "IPI", id); +} diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c index 71d1c42..e0590ff 100644 --- a/arch/sh/kernel/cpufreq.c +++ b/arch/sh/kernel/cpufreq.c @@ -77,8 +77,6 @@ static int sh_cpufreq_target(struct cpufreq_policy *policy, static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) { - printk(KERN_INFO "cpufreq: SuperH CPU frequency driver.\n"); - if (!cpu_online(policy->cpu)) return -ENODEV; @@ -143,6 +141,7 @@ static struct cpufreq_driver sh_cpufreq_driver = { static int __init sh_cpufreq_module_init(void) { + printk(KERN_INFO "cpufreq: SuperH CPU frequency driver.\n"); return cpufreq_register_driver(&sh_cpufreq_driver); } diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 80b637c..2f30977 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -3,7 +3,7 @@ * * Copyright (C) 1999, 2000 Niibe Yutaka * Copyright (C) 2002 M. R. Brown - * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -13,6 +13,7 @@ #include <linux/tty.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/delay.h> #ifdef CONFIG_SH_STANDARD_BIOS #include <asm/sh_bios.h> @@ -62,6 +63,16 @@ static struct console bios_console = { #include <linux/serial_core.h> #include "../../../drivers/serial/sh-sci.h" +#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#define EPK_SCSMR_VALUE 0x000 +#define EPK_SCBRR_VALUE 0x00C +#define EPK_FIFO_SIZE 64 +#define EPK_FIFO_BITS (0x7f00 >> 8) +#else +#define EPK_FIFO_SIZE 16 +#define EPK_FIFO_BITS (0x1f00 >> 8) +#endif + static struct uart_port scif_port = { .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, @@ -69,7 +80,7 @@ static struct uart_port scif_port = { static void scif_sercon_putc(int c) { - while (((sci_in(&scif_port, SCFDR) & 0x1f00 >> 8) == 16)) + while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE)) ; sci_out(&scif_port, SCxTDR, c); @@ -105,7 +116,22 @@ static struct console scif_console = { .index = -1, }; -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#if !defined(CONFIG_SH_STANDARD_BIOS) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) +static void scif_sercon_init(char *s) +{ + sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */ + sci_out(&scif_port, SCFCR, 0x4006); /* reset */ + sci_out(&scif_port, SCSCR, 0x0000); /* select internal clock */ + sci_out(&scif_port, SCSMR, EPK_SCSMR_VALUE); + sci_out(&scif_port, SCBRR, EPK_SCBRR_VALUE); + + mdelay(1); /* wait 1-bit time */ + + sci_out(&scif_port, SCFCR, 0x0030); /* TTRG=b'11 */ + sci_out(&scif_port, SCSCR, 0x0030); /* TE, RE */ +} +#elif defined(CONFIG_CPU_SH4) #define DEFAULT_BAUD 115200 /* * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 @@ -146,7 +172,8 @@ static void scif_sercon_init(char *s) ctrl_outw(0, scif_port.mapbase + 36); ctrl_outw(0x30, scif_port.mapbase + 8); } -#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */ +#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */ +#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */ #endif /* CONFIG_EARLY_SCIF_CONSOLE */ /* @@ -163,17 +190,12 @@ static struct console *early_console = #endif ; -static int __initdata keep_early; -static int early_console_initialized; - -int __init setup_early_printk(char *buf) +static int __init setup_early_printk(char *buf) { - if (!buf) - return 0; + int keep_early = 0; - if (early_console_initialized) + if (!buf) return 0; - early_console_initialized = 1; if (strstr(buf, "keep")) keep_early = 1; @@ -186,7 +208,8 @@ int __init setup_early_printk(char *buf) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \ + !defined(CONFIG_SH_STANDARD_BIOS) scif_sercon_init(buf + 6); #endif } diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index b467280..e0317ed 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -176,7 +176,7 @@ work_notifysig: jmp @r1 lds r0, pr work_resched: -#ifndef CONFIG_PREEMPT +#if defined(CONFIG_GUSA) && !defined(CONFIG_PREEMPT) ! gUSA handling mov.l @(OFF_SP,r15), r0 ! get user space stack pointer mov r0, r1 diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head.S index 0bccc0c..3338239 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head.S @@ -54,8 +54,8 @@ ENTRY(_stext) mov.l 1f, r0 ! MD=1, RB=0, BL=0, IMASK=0xF ldc r0, sr ! Initialize global interrupt mask - mov #0, r0 #ifdef CONFIG_CPU_HAS_SR_RB + mov #0, r0 ldc r0, r6_bank #endif @@ -72,15 +72,18 @@ ENTRY(_stext) ! mov.l 2f, r0 mov r0, r15 ! Set initial r15 (stack pointer) - mov #(THREAD_SIZE >> 10), r1 - shll8 r1 ! r1 = THREAD_SIZE - shll2 r1 - sub r1, r0 ! #ifdef CONFIG_CPU_HAS_SR_RB + mov.l 7f, r0 ldc r0, r7_bank ! ... and initial thread_info #endif ! Clear BSS area +#ifdef CONFIG_SMP + mov.l 3f, r0 + cmp/eq #0, r0 ! skip clear if set to zero + bt 10f +#endif + mov.l 3f, r1 add #4, r1 mov.l 4f, r2 @@ -89,13 +92,14 @@ ENTRY(_stext) bf/s 9b ! while (r1 < r2) mov.l r0,@-r2 +10: ! Additional CPU initialization mov.l 6f, r0 jsr @r0 nop SYNCO() ! Wait for pending instructions.. - + ! Start kernel mov.l 5f, r0 jmp @r0 @@ -107,8 +111,10 @@ ENTRY(_stext) #else 1: .long 0x400080F0 ! MD=1, RB=0, BL=0, FD=1, IMASK=0xF #endif +ENTRY(stack_start) 2: .long init_thread_union+THREAD_SIZE 3: .long __bss_start 4: .long _end 5: .long start_kernel 6: .long sh_cpu_init +7: .long init_thread_union diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index edd1ec2..2fdc700 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -150,13 +150,6 @@ struct kgdb_regs trap_registers; char kgdb_in_gdb_mode; char in_nmi; /* Set during NMI to prevent reentry */ int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */ -int kgdb_enabled = 1; /* Default to enabled, cmdline can disable */ - -/* Exposed for user access */ -struct task_struct *kgdb_current; -unsigned int kgdb_g_imask; -int kgdb_trapa_val; -int kgdb_excode; /* Default values for SCI (can override via kernel args in setup.c) */ #ifndef CONFIG_KGDB_DEFPORT @@ -616,7 +609,7 @@ static short *get_step_address(void) else addr = trap_registers.pc + 2; - kgdb_flush_icache_range(addr, addr + 2); + flush_icache_range(addr, addr + 2); return (short *) addr; } @@ -639,8 +632,7 @@ static void do_single_step(void) *addr = STEP_OPCODE; /* Flush and return */ - kgdb_flush_icache_range((long) addr, (long) addr + 2); - return; + flush_icache_range((long) addr, (long) addr + 2); } /* Undo a single step */ @@ -650,7 +642,7 @@ static void undo_single_step(void) /* Use stepped_address in case we stopped elsewhere */ if (stepped_opcode != 0) { *(short*)stepped_address = stepped_opcode; - kgdb_flush_icache_range(stepped_address, stepped_address + 2); + flush_icache_range(stepped_address, stepped_address + 2); } stepped_opcode = 0; } @@ -736,7 +728,7 @@ static void write_mem_msg(int binary) ebin_to_mem(ptr, (char*)addr, length); else hex_to_mem(ptr, (char*)addr, length); - kgdb_flush_icache_range(addr, addr + length); + flush_icache_range(addr, addr + length); ptr = 0; send_ok_msg(); } @@ -815,14 +807,10 @@ static void set_regs_msg(void) /* * Bring up the ports.. */ -static int kgdb_serial_setup(void) +static int __init kgdb_serial_setup(void) { - extern int kgdb_console_setup(struct console *co, char *options); struct console dummy; - - kgdb_console_setup(&dummy, 0); - - return 0; + return kgdb_console_setup(&dummy, 0); } #else #define kgdb_serial_setup() 0 @@ -833,22 +821,6 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) { int sigval; - if (excep_code == NMI_VEC) { -#ifndef CONFIG_KGDB_NMI - printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n"); - return; -#else /* CONFIG_KGDB_NMI */ - if (!kgdb_enabled) { - kgdb_enabled = 1; - kgdb_init(); - } -#endif /* CONFIG_KGDB_NMI */ - } - - /* Ignore if we're disabled */ - if (!kgdb_enabled) - return; - /* Enter GDB mode (e.g. after detach) */ if (!kgdb_in_gdb_mode) { /* Do serial setup, notify user, issue preemptive ack */ @@ -959,18 +931,10 @@ static void handle_exception(struct pt_regs *regs) /* Get excode for command loop call, user access */ asm("stc r2_bank, %0":"=r"(excep_code)); - kgdb_excode = excep_code; - - /* Other interesting environment items for reference */ - asm("stc r6_bank, %0":"=r"(kgdb_g_imask)); - kgdb_current = current; - kgdb_trapa_val = trapa_value; /* Act on the exception */ kgdb_command_loop(excep_code, trapa_value); - kgdb_current = NULL; - /* Copy back the (maybe modified) registers */ for (count = 0; count < 16; count++) regs->regs[count] = trap_registers.regs[count]; @@ -994,11 +958,8 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, } /* Initialise the KGDB data structures and serial configuration */ -int kgdb_init(void) +int __init kgdb_init(void) { - if (!kgdb_enabled) - return 1; - in_nmi = 0; kgdb_nofault = 0; stepped_opcode = 0; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 15ae322..b4469992 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -19,6 +19,7 @@ #include <linux/tick.h> #include <linux/reboot.h> #include <linux/fs.h> +#include <linux/preempt.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> #include <asm/pgalloc.h> @@ -349,12 +350,11 @@ struct task_struct *__switch_to(struct task_struct *prev, unlazy_fpu(prev, task_pt_regs(prev)); #endif -#ifdef CONFIG_PREEMPT +#if defined(CONFIG_GUSA) && defined(CONFIG_PREEMPT) { - unsigned long flags; struct pt_regs *regs; - local_irq_save(flags); + preempt_disable(); regs = task_pt_regs(prev); if (user_mode(regs) && regs->regs[15] >= 0xc0000000) { int offset = (int)regs->regs[15]; @@ -365,7 +365,7 @@ struct task_struct *__switch_to(struct task_struct *prev, /* Go to rewind point */ regs->pc = regs->regs[0] + offset; } - local_irq_restore(flags); + preempt_enable_no_resched(); } #endif diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 2cf7dec..b3027a6 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -22,6 +22,7 @@ #include <linux/mm.h> #include <linux/kexec.h> #include <linux/module.h> +#include <linux/smp.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/page.h> @@ -42,7 +43,13 @@ extern void * __rd_start, * __rd_end; * This value will be used at the very early stage of serial setup. * The bigger value means no problem. */ -struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; +struct sh_cpuinfo cpu_data[NR_CPUS] __read_mostly = { + [0] = { + .type = CPU_SH_NONE, + .loops_per_jiffy = 10000000, + }, +}; +EXPORT_SYMBOL(cpu_data); /* * The machine vector. First entry in .machvec.init, or clobbered by @@ -272,6 +279,10 @@ void __init setup_arch(char **cmdline_p) sh_mv.mv_setup(cmdline_p); paging_init(); + +#ifdef CONFIG_SMP + plat_smp_setup(); +#endif } static const char *cpu_name[] = { @@ -279,7 +290,7 @@ static const char *cpu_name[] = { [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", - [CPU_SH7712] = "SH7712", + [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 37aef0a..548e428 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -8,7 +8,7 @@ #include <linux/vmalloc.h> #include <linux/pci.h> #include <linux/irq.h> - +#include <asm/sections.h> #include <asm/semaphore.h> #include <asm/processor.h> #include <asm/uaccess.h> @@ -43,7 +43,6 @@ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(__copy_user); -EXPORT_SYMBOL(boot_cpu_data); #ifdef CONFIG_MMU EXPORT_SYMBOL(get_vm_area); @@ -53,6 +52,7 @@ EXPORT_SYMBOL(get_vm_area); EXPORT_SYMBOL(__up); EXPORT_SYMBOL(__down); EXPORT_SYMBOL(__down_interruptible); +EXPORT_SYMBOL(__down_trylock); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); @@ -128,7 +128,8 @@ DECLARE_EXPORT(__movstrSI12_i4); #endif /* __GNUC__ == 4 */ #endif -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) +#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) /* needed by some modules */ EXPORT_SYMBOL(flush_cache_all); EXPORT_SYMBOL(flush_cache_range); @@ -136,17 +137,11 @@ EXPORT_SYMBOL(flush_dcache_page); EXPORT_SYMBOL(__flush_purge_region); #endif -#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \ - defined(CONFIG_SH7705_CACHE_32KB)) +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ + (defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)) EXPORT_SYMBOL(clear_user_page); #endif -EXPORT_SYMBOL(__down_trylock); - -#ifdef CONFIG_SMP -EXPORT_SYMBOL(synchronize_irq); -#endif - EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); #ifdef CONFIG_IPV6 @@ -154,3 +149,4 @@ EXPORT_SYMBOL(csum_ipv6_magic); #endif EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(__clear_user); +EXPORT_SYMBOL(_ebss); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal.c index 706d81c..2f42442 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal.c @@ -507,13 +507,11 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, ctrl_inw(regs->pc - 4)); break; } +#ifdef CONFIG_GUSA } else { /* gUSA handling */ -#ifdef CONFIG_PREEMPT - unsigned long flags; + preempt_disable(); - local_irq_save(flags); -#endif if (regs->regs[15] >= 0xc0000000) { int offset = (int)regs->regs[15]; @@ -524,8 +522,8 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, regs->pc = regs->regs[0] + offset - instruction_size(ctrl_inw(regs->pc-4)); } -#ifdef CONFIG_PREEMPT - local_irq_restore(flags); + + preempt_enable_no_resched(); #endif } diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 283e142..94075e1 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -3,68 +3,40 @@ * * SMP support for the SuperH processors. * - * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt + * Copyright (C) 2006 - 2007 Akio Idehara * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/err.h> #include <linux/cache.h> #include <linux/cpumask.h> #include <linux/delay.h> #include <linux/init.h> -#include <linux/interrupt.h> #include <linux/spinlock.h> -#include <linux/threads.h> +#include <linux/mm.h> #include <linux/module.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/sched.h> -#include <linux/module.h> - +#include <linux/interrupt.h> #include <asm/atomic.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/mmu_context.h> #include <asm/smp.h> +#include <asm/cacheflush.h> +#include <asm/sections.h> -/* - * This was written with the Sega Saturn (SMP SH-2 7604) in mind, - * but is designed to be usable regardless if there's an MMU - * present or not. - */ -struct sh_cpuinfo cpu_data[NR_CPUS]; - -extern void per_cpu_trap_init(void); +int __cpu_number_map[NR_CPUS]; /* Map physical to logical */ +int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */ cpumask_t cpu_possible_map; EXPORT_SYMBOL(cpu_possible_map); cpumask_t cpu_online_map; EXPORT_SYMBOL(cpu_online_map); -static atomic_t cpus_booted = ATOMIC_INIT(0); -/* These are defined by the board-specific code. */ - -/* - * Cause the function described by call_data to be executed on the passed - * cpu. When the function has finished, increment the finished field of - * call_data. - */ -void __smp_send_ipi(unsigned int cpu, unsigned int action); - -/* - * Find the number of available processors - */ -unsigned int __smp_probe_cpus(void); - -/* - * Start a particular processor - */ -void __smp_slave_init(unsigned int cpu); +static atomic_t cpus_booted = ATOMIC_INIT(0); /* * Run specified function on a particular processor. @@ -73,74 +45,123 @@ void __smp_call_function(unsigned int cpu); static inline void __init smp_store_cpu_info(unsigned int cpu) { - cpu_data[cpu].loops_per_jiffy = loops_per_jiffy; + struct sh_cpuinfo *c = cpu_data + cpu; + + c->loops_per_jiffy = loops_per_jiffy; } void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int cpu = smp_processor_id(); - int i; - atomic_set(&cpus_booted, 1); - smp_store_cpu_info(cpu); - - for (i = 0; i < __smp_probe_cpus(); i++) - cpu_set(i, cpu_possible_map); + init_new_context(current, &init_mm); + current_thread_info()->cpu = cpu; + plat_prepare_cpus(max_cpus); + +#ifndef CONFIG_HOTPLUG_CPU + cpu_present_map = cpu_possible_map; +#endif } void __devinit smp_prepare_boot_cpu(void) { unsigned int cpu = smp_processor_id(); + __cpu_number_map[0] = cpu; + __cpu_logical_map[0] = cpu; + cpu_set(cpu, cpu_online_map); cpu_set(cpu, cpu_possible_map); } -int __cpu_up(unsigned int cpu) +asmlinkage void __cpuinit start_secondary(void) { - struct task_struct *tsk; + unsigned int cpu; + struct mm_struct *mm = &init_mm; - tsk = fork_idle(cpu); + atomic_inc(&mm->mm_count); + atomic_inc(&mm->mm_users); + current->active_mm = mm; + BUG_ON(current->mm); + enter_lazy_tlb(mm, current); - if (IS_ERR(tsk)) - panic("Failed forking idle task for cpu %d\n", cpu); - - task_thread_info(tsk)->cpu = cpu; + per_cpu_trap_init(); + + preempt_disable(); + + local_irq_enable(); + + calibrate_delay(); + + cpu = smp_processor_id(); + smp_store_cpu_info(cpu); cpu_set(cpu, cpu_online_map); - return 0; + cpu_idle(); } -int start_secondary(void *unused) +extern struct { + unsigned long sp; + unsigned long bss_start; + unsigned long bss_end; + void *start_kernel_fn; + void *cpu_init_fn; + void *thread_info; +} stack_start; + +int __cpuinit __cpu_up(unsigned int cpu) { - unsigned int cpu; + struct task_struct *tsk; + unsigned long timeout; - cpu = smp_processor_id(); + tsk = fork_idle(cpu); + if (IS_ERR(tsk)) { + printk(KERN_ERR "Failed forking idle task for cpu %d\n", cpu); + return PTR_ERR(tsk); + } - atomic_inc(&init_mm.mm_count); - current->active_mm = &init_mm; + /* Fill in data in head.S for secondary cpus */ + stack_start.sp = tsk->thread.sp; + stack_start.thread_info = tsk->stack; + stack_start.bss_start = 0; /* don't clear bss for secondary cpus */ + stack_start.start_kernel_fn = start_secondary; - smp_store_cpu_info(cpu); + flush_cache_all(); - __smp_slave_init(cpu); - preempt_disable(); - per_cpu_trap_init(); - - atomic_inc(&cpus_booted); + plat_start_cpu(cpu, (unsigned long)_stext); - cpu_idle(); - return 0; + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) { + if (cpu_online(cpu)) + break; + + udelay(10); + } + + if (cpu_online(cpu)) + return 0; + + return -ENOENT; } void __init smp_cpus_done(unsigned int max_cpus) { - smp_mb(); + unsigned long bogosum = 0; + int cpu; + + for_each_online_cpu(cpu) + bogosum += cpu_data[cpu].loops_per_jiffy; + + printk(KERN_INFO "SMP: Total of %d processors activated " + "(%lu.%02lu BogoMIPS).\n", num_online_cpus(), + bogosum / (500000/HZ), + (bogosum / (5000/HZ)) % 100); } void smp_send_reschedule(int cpu) { - __smp_send_ipi(cpu, SMP_MSG_RESCHEDULE); + plat_send_ipi(cpu, SMP_MSG_RESCHEDULE); } static void stop_this_cpu(void *unused) @@ -157,7 +178,6 @@ void smp_send_stop(void) smp_call_function(stop_this_cpu, 0, 1, 0); } - struct smp_fn_call_struct smp_fn_call = { .lock = SPIN_LOCK_UNLOCKED, .finished = ATOMIC_INIT(0), @@ -175,9 +195,6 @@ int smp_call_function(void (*func)(void *info), void *info, int retry, int wait) unsigned int nr_cpus = atomic_read(&cpus_booted); int i; - if (nr_cpus < 2) - return 0; - /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -189,7 +206,7 @@ int smp_call_function(void (*func)(void *info), void *info, int retry, int wait) for (i = 0; i < nr_cpus; i++) if (i != smp_processor_id()) - __smp_call_function(i); + plat_send_ipi(i, SMP_MSG_FUNCTION); if (wait) while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1)); @@ -205,3 +222,143 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } +static void flush_tlb_all_ipi(void *info) +{ + local_flush_tlb_all(); +} + +void flush_tlb_all(void) +{ + on_each_cpu(flush_tlb_all_ipi, 0, 1, 1); +} + +static void flush_tlb_mm_ipi(void *mm) +{ + local_flush_tlb_mm((struct mm_struct *)mm); +} + +/* + * The following tlb flush calls are invoked when old translations are + * being torn down, or pte attributes are changing. For single threaded + * address spaces, a new context is obtained on the current cpu, and tlb + * context on other cpus are invalidated to force a new context allocation + * at switch_mm time, should the mm ever be used on other cpus. For + * multithreaded address spaces, intercpu interrupts have to be sent. + * Another case where intercpu interrupts are required is when the target + * mm might be active on another cpu (eg debuggers doing the flushes on + * behalf of debugees, kswapd stealing pages from another process etc). + * Kanoj 07/00. + */ + +void flush_tlb_mm(struct mm_struct *mm) +{ + preempt_disable(); + + if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1); + } else { + int i; + for (i = 0; i < num_online_cpus(); i++) + if (smp_processor_id() != i) + cpu_context(i, mm) = 0; + } + local_flush_tlb_mm(mm); + + preempt_enable(); +} + +struct flush_tlb_data { + struct vm_area_struct *vma; + unsigned long addr1; + unsigned long addr2; +}; + +static void flush_tlb_range_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + + local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2); +} + +void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + preempt_disable(); + if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + struct flush_tlb_data fd; + + fd.vma = vma; + fd.addr1 = start; + fd.addr2 = end; + smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1); + } else { + int i; + for (i = 0; i < num_online_cpus(); i++) + if (smp_processor_id() != i) + cpu_context(i, mm) = 0; + } + local_flush_tlb_range(vma, start, end); + preempt_enable(); +} + +static void flush_tlb_kernel_range_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + + local_flush_tlb_kernel_range(fd->addr1, fd->addr2); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct flush_tlb_data fd; + + fd.addr1 = start; + fd.addr2 = end; + on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1, 1); +} + +static void flush_tlb_page_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + + local_flush_tlb_page(fd->vma, fd->addr1); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + preempt_disable(); + if ((atomic_read(&vma->vm_mm->mm_users) != 1) || + (current->mm != vma->vm_mm)) { + struct flush_tlb_data fd; + + fd.vma = vma; + fd.addr1 = page; + smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1); + } else { + int i; + for (i = 0; i < num_online_cpus(); i++) + if (smp_processor_id() != i) + cpu_context(i, vma->vm_mm) = 0; + } + local_flush_tlb_page(vma, page); + preempt_enable(); +} + +static void flush_tlb_one_ipi(void *info) +{ + struct flush_tlb_data *fd = (struct flush_tlb_data *)info; + local_flush_tlb_one(fd->addr1, fd->addr2); +} + +void flush_tlb_one(unsigned long asid, unsigned long vaddr) +{ + struct flush_tlb_data fd; + + fd.addr1 = asid; + fd.addr2 = vaddr; + + smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1, 1); + local_flush_tlb_one(asid, vaddr); +} diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index 91fb702..10bec45 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -14,24 +14,6 @@ #include <linux/sys.h> #include <linux/linkage.h> -#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) -#define sys_nfsservctl sys_ni_syscall -#endif - -#if !defined(CONFIG_MMU) -#define sys_madvise sys_ni_syscall -#define sys_readahead sys_ni_syscall -#define sys_mprotect sys_ni_syscall -#define sys_msync sys_ni_syscall -#define sys_mlock sys_ni_syscall -#define sys_munlock sys_ni_syscall -#define sys_mlockall sys_ni_syscall -#define sys_munlockall sys_ni_syscall -#define sys_mremap sys_ni_syscall -#define sys_mincore sys_ni_syscall -#define sys_remap_file_pages sys_ni_syscall -#endif - .data ENTRY(sys_call_table) .long sys_restart_syscall /* 0 - old "setup()" system call*/ diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 8a545d5..628ec9a 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -173,7 +173,8 @@ static int tmu_timer_init(void) tmu_timer_stop(); -#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 6701504..dcb46e7 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -807,12 +807,13 @@ static inline void __init gdb_vbr_init(void) } #endif -void __init per_cpu_trap_init(void) +void __cpuinit per_cpu_trap_init(void) { extern void *vbr_base; #ifdef CONFIG_SH_STANDARD_BIOS - gdb_vbr_init(); + if (raw_smp_processor_id() == 0) + gdb_vbr_init(); #endif /* NOTE: The VBR value should be at P1 diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 9cb95af..6d5abba 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -62,6 +62,8 @@ SECTIONS __nosave_end = .; PERCPU(PAGE_SIZE) + + . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : { *(.data.cacheline_aligned) } _edata = .; /* End of data section */ @@ -89,7 +91,14 @@ SECTIONS __con_initcall_end = .; SECURITY_INIT + /* .exit.text is discarded at runtime, not link time, to deal with + references from .rodata */ + .exit.text : { *(.exit.text) } + .exit.data : { *(.exit.data) } + #ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(PAGE_SIZE); + __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; @@ -107,6 +116,7 @@ SECTIONS *(.bss.page_aligned) *(.bss) . = ALIGN(4); + _ebss = .; /* uClinux MTD sucks */ _end = . ; } diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 43f3972..cf446bb 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -2,7 +2,6 @@ # Processor families # config CPU_SH2 - select SH_WRITETHROUGH if !CPU_SH2A bool config CPU_SH2A @@ -19,6 +18,7 @@ config CPU_SH4 select CPU_HAS_INTEVT select CPU_HAS_SR_RB select CPU_HAS_PTEA if (!CPU_SUBTYPE_ST40 && !CPU_SH4A) || CPU_SHX2 + select CPU_HAS_FPU if !CPU_SH4AL_DSP config CPU_SH4A bool @@ -32,7 +32,6 @@ config CPU_SH4AL_DSP config CPU_SUBTYPE_ST40 bool select CPU_SH4 - select CPU_HAS_INTC2_IRQ config CPU_SHX2 bool @@ -52,26 +51,22 @@ choice config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 - select CPU_HAS_IPR_IRQ # SH-2A Processor Support config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A - select CPU_HAS_IPR_IRQ # SH-3 Processor Support config CPU_SUBTYPE_SH7705 bool "Support SH7705 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH7706 bool "Support SH7706 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ help Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. @@ -91,14 +86,12 @@ config CPU_SUBTYPE_SH7708 config CPU_SUBTYPE_SH7709 bool "Support SH7709 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ help Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. config CPU_SUBTYPE_SH7710 bool "Support SH7710 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ select CPU_HAS_DSP help Select SH7710 if you have a SH3-DSP SH7710 CPU. @@ -106,24 +99,28 @@ config CPU_SUBTYPE_SH7710 config CPU_SUBTYPE_SH7712 bool "Support SH7712 processor" select CPU_SH3 - select CPU_HAS_IPR_IRQ select CPU_HAS_DSP help Select SH7712 if you have a SH3-DSP SH7712 CPU. +config CPU_SUBTYPE_SH7720 + bool "Support SH7720 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7720 if you have a SH3-DSP SH7720 CPU. + # SH-4 Processor Support config CPU_SUBTYPE_SH7750 bool "Support SH7750 processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ help Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. config CPU_SUBTYPE_SH7091 bool "Support SH7091 processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ help Select SH7091 if you have an SH-4 based Sega device (such as the Dreamcast, Naomi, and Naomi 2). @@ -131,17 +128,14 @@ config CPU_SUBTYPE_SH7091 config CPU_SUBTYPE_SH7750R bool "Support SH7750R processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7750S bool "Support SH7750S processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7751 bool "Support SH7751 processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ help Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, or if you have a HD6417751R CPU. @@ -149,13 +143,10 @@ config CPU_SUBTYPE_SH7751 config CPU_SUBTYPE_SH7751R bool "Support SH7751R processor" select CPU_SH4 - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 - select CPU_HAS_INTC2_IRQ - select CPU_HAS_IPR_IRQ config CPU_SUBTYPE_SH4_202 bool "Support SH4-202 processor" @@ -185,19 +176,21 @@ config CPU_SUBTYPE_SH7770 config CPU_SUBTYPE_SH7780 bool "Support SH7780 processor" select CPU_SH4A - select CPU_HAS_INTC_IRQ config CPU_SUBTYPE_SH7785 bool "Support SH7785 processor" select CPU_SH4A select CPU_SHX2 - select CPU_HAS_INTC2_IRQ + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" select CPU_SH4A select CPU_SHX3 - select CPU_HAS_INTC2_IRQ + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP # SH4AL-DSP Processor Support @@ -209,7 +202,6 @@ config CPU_SUBTYPE_SH7722 bool "Support SH7722 processor" select CPU_SH4AL_DSP select CPU_SHX2 - select CPU_HAS_INTC_IRQ select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA @@ -274,7 +266,7 @@ config 32BIT config X2TLB bool "Enable extended TLB mode" - depends on CPU_SHX2 && MMU && EXPERIMENTAL + depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL help Selecting this option will enable the extended mode of the SH-X2 TLB. For legacy SH-X behaviour and interoperability, say N. For @@ -307,6 +299,7 @@ config NUMA config NODES_SHIFT int + default "3" if CPU_SUBTYPE_SHX3 default "1" depends on NEED_MULTIPLE_NODES @@ -323,7 +316,9 @@ config ARCH_SPARSEMEM_DEFAULT config MAX_ACTIVE_REGIONS int - default "2" if (CPU_SUBTYPE_SH7722 && SPARSEMEM) + default "6" if (CPU_SUBTYPE_SHX3 && SPARSEMEM) + default "2" if SPARSEMEM && (CPU_SUBTYPE_SH7722 || \ + CPU_SUBTYPE_SH7785) default "1" config ARCH_POPULATES_NODE_MAP @@ -342,25 +337,27 @@ config ARCH_MEMORY_PROBE choice prompt "Kernel page size" + default PAGE_SIZE_8KB if X2TLB default PAGE_SIZE_4KB config PAGE_SIZE_4KB bool "4kB" + depends on !X2TLB help This is the default page size used by all SuperH CPUs. config PAGE_SIZE_8KB bool "8kB" - depends on EXPERIMENTAL && X2TLB + depends on X2TLB help This enables 8kB pages as supported by SH-X2 and later MMUs. config PAGE_SIZE_64KB bool "64kB" - depends on EXPERIMENTAL && CPU_SH4 + depends on CPU_SH4 help This enables support for 64kB pages, possible on all SH-4 - CPUs and later. Highly experimental, not recommended. + CPUs and later. endchoice @@ -412,8 +409,17 @@ config SH_DIRECT_MAPPED Turn this option off for platforms that do not have a direct-mapped cache, and you have no need to run the caches in such a configuration. -config SH_WRITETHROUGH - bool "Use write-through caching" +choice + prompt "Cache mode" + default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 + default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A) + +config CACHE_WRITEBACK + bool "Write-back" + depends on CPU_SH2A || CPU_SH3 || CPU_SH4 + +config CACHE_WRITETHROUGH + bool "Write-through" help Selecting this option will configure the caches in write-through mode, as opposed to the default write-back configuration. @@ -424,4 +430,9 @@ config SH_WRITETHROUGH If unsure, say N. +config CACHE_OFF + bool "Off" + +endchoice + endmenu diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 4061e89..ee30fb4 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -4,29 +4,32 @@ obj-y := init.o extable.o consistent.o -obj-$(CONFIG_CPU_SH2) += cache-sh2.o -obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o +ifndef CONFIG_CACHE_OFF +obj-$(CONFIG_CPU_SH2) += cache-sh2.o +obj-$(CONFIG_CPU_SH3) += cache-sh3.o +obj-$(CONFIG_CPU_SH4) += cache-sh4.o +obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +endif mmu-y := tlb-nommu.o pg-nommu.o -mmu-$(CONFIG_CPU_SH3) += fault-nommu.o -mmu-$(CONFIG_CPU_SH4) += fault-nommu.o mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \ ioremap.o obj-y += $(mmu-y) ifdef CONFIG_DEBUG_FS -obj-$(CONFIG_CPU_SH4) += cache-debugfs.o +obj-$(CONFIG_CPU_SH4) += cache-debugfs.o endif ifdef CONFIG_MMU -obj-$(CONFIG_CPU_SH3) += tlb-sh3.o -obj-$(CONFIG_CPU_SH4) += tlb-sh4.o pg-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o +obj-$(CONFIG_CPU_SH3) += tlb-sh3.o +obj-$(CONFIG_CPU_SH4) += tlb-sh4.o +ifndef CONFIG_CACHE_OFF +obj-$(CONFIG_CPU_SH4) += pg-sh4.o +obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o +endif endif obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o obj-$(CONFIG_32BIT) += pmb.o obj-$(CONFIG_NUMA) += numa.o diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 8648632..226b190 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -2,7 +2,7 @@ * arch/sh/mm/cache-sh4.c * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2001 - 2006 Paul Mundt + * Copyright (C) 2001 - 2007 Paul Mundt * Copyright (C) 2003 Richard Curnow * * This file is subject to the terms and conditions of the GNU General Public @@ -44,7 +44,7 @@ static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) = static void compute_alias(struct cache_info *c) { c->alias_mask = ((c->sets - 1) << c->entry_shift) & ~(PAGE_SIZE - 1); - c->n_aliases = (c->alias_mask >> PAGE_SHIFT) + 1; + c->n_aliases = c->alias_mask ? (c->alias_mask >> PAGE_SHIFT) + 1 : 0; } static void __init emit_cache_params(void) @@ -54,21 +54,35 @@ static void __init emit_cache_params(void) ctrl_inl(CCN_CVR), ctrl_inl(CCN_PRR)); printk("I-cache : n_ways=%d n_sets=%d way_incr=%d\n", - current_cpu_data.icache.ways, - current_cpu_data.icache.sets, - current_cpu_data.icache.way_incr); + boot_cpu_data.icache.ways, + boot_cpu_data.icache.sets, + boot_cpu_data.icache.way_incr); printk("I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - current_cpu_data.icache.entry_mask, - current_cpu_data.icache.alias_mask, - current_cpu_data.icache.n_aliases); + boot_cpu_data.icache.entry_mask, + boot_cpu_data.icache.alias_mask, + boot_cpu_data.icache.n_aliases); printk("D-cache : n_ways=%d n_sets=%d way_incr=%d\n", - current_cpu_data.dcache.ways, - current_cpu_data.dcache.sets, - current_cpu_data.dcache.way_incr); + boot_cpu_data.dcache.ways, + boot_cpu_data.dcache.sets, + boot_cpu_data.dcache.way_incr); printk("D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", - current_cpu_data.dcache.entry_mask, - current_cpu_data.dcache.alias_mask, - current_cpu_data.dcache.n_aliases); + boot_cpu_data.dcache.entry_mask, + boot_cpu_data.dcache.alias_mask, + boot_cpu_data.dcache.n_aliases); + + /* + * Emit Secondary Cache parameters if the CPU has a probed L2. + */ + if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) { + printk("S-cache : n_ways=%d n_sets=%d way_incr=%d\n", + boot_cpu_data.scache.ways, + boot_cpu_data.scache.sets, + boot_cpu_data.scache.way_incr); + printk("S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n", + boot_cpu_data.scache.entry_mask, + boot_cpu_data.scache.alias_mask, + boot_cpu_data.scache.n_aliases); + } if (!__flush_dcache_segment_fn) panic("unknown number of cache ways\n"); @@ -79,10 +93,11 @@ static void __init emit_cache_params(void) */ void __init p3_cache_init(void) { - compute_alias(¤t_cpu_data.icache); - compute_alias(¤t_cpu_data.dcache); + compute_alias(&boot_cpu_data.icache); + compute_alias(&boot_cpu_data.dcache); + compute_alias(&boot_cpu_data.scache); - switch (current_cpu_data.dcache.ways) { + switch (boot_cpu_data.dcache.ways) { case 1: __flush_dcache_segment_fn = __flush_dcache_segment_1way; break; @@ -187,13 +202,13 @@ void flush_cache_sigtramp(unsigned long addr) : "m" (__m(v))); index = CACHE_IC_ADDRESS_ARRAY | - (v & current_cpu_data.icache.entry_mask); + (v & boot_cpu_data.icache.entry_mask); local_irq_save(flags); jump_to_P2(); - for (i = 0; i < current_cpu_data.icache.ways; - i++, index += current_cpu_data.icache.way_incr) + for (i = 0; i < boot_cpu_data.icache.ways; + i++, index += boot_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ back_to_P1(); @@ -210,7 +225,7 @@ static inline void flush_cache_4096(unsigned long start, * All types of SH-4 require PC to be in P2 to operate on the I-cache. * Some types of SH-4 require PC to be in P2 to operate on the D-cache. */ - if ((current_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || + if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) || (start < CACHE_OC_ADDRESS_ARRAY)) exec_offset = 0x20000000; @@ -232,7 +247,7 @@ void flush_dcache_page(struct page *page) int i, n; /* Loop all the D-cache */ - n = current_cpu_data.dcache.n_aliases; + n = boot_cpu_data.dcache.n_aliases; for (i = 0; i < n; i++, addr += 4096) flush_cache_4096(addr, phys); } @@ -264,7 +279,7 @@ static inline void flush_icache_all(void) void flush_dcache_all(void) { - (*__flush_dcache_segment_fn)(0UL, current_cpu_data.dcache.way_size); + (*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size); wmb(); } @@ -278,8 +293,8 @@ static void __flush_cache_mm(struct mm_struct *mm, unsigned long start, unsigned long end) { unsigned long d = 0, p = start & PAGE_MASK; - unsigned long alias_mask = current_cpu_data.dcache.alias_mask; - unsigned long n_aliases = current_cpu_data.dcache.n_aliases; + unsigned long alias_mask = boot_cpu_data.dcache.alias_mask; + unsigned long n_aliases = boot_cpu_data.dcache.n_aliases; unsigned long select_bit; unsigned long all_aliases_mask; unsigned long addr_offset; @@ -366,7 +381,7 @@ void flush_cache_mm(struct mm_struct *mm) * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (current_cpu_data.dcache.n_aliases == 0) + if (boot_cpu_data.dcache.n_aliases == 0) return; /* @@ -403,7 +418,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, unsigned long phys = pfn << PAGE_SHIFT; unsigned int alias_mask; - alias_mask = current_cpu_data.dcache.alias_mask; + alias_mask = boot_cpu_data.dcache.alias_mask; /* We only need to flush D-cache when we have alias */ if ((address^phys) & alias_mask) { @@ -417,7 +432,7 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long address, phys); } - alias_mask = current_cpu_data.icache.alias_mask; + alias_mask = boot_cpu_data.icache.alias_mask; if (vma->vm_flags & VM_EXEC) { /* * Evict entries from the portion of the cache from which code @@ -449,7 +464,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, * If cache is only 4k-per-way, there are never any 'aliases'. Since * the cache is physically tagged, the data can just be left in there. */ - if (current_cpu_data.dcache.n_aliases == 0) + if (boot_cpu_data.dcache.n_aliases == 0) return; /* @@ -510,7 +525,7 @@ static void __flush_cache_4096(unsigned long addr, unsigned long phys, unsigned long a, ea, p; unsigned long temp_pc; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; /* Write this way for better assembly. */ way_count = dcache->ways; way_incr = dcache->way_incr; @@ -585,7 +600,7 @@ static void __flush_dcache_segment_1way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -627,7 +642,7 @@ static void __flush_dcache_segment_2way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; @@ -686,7 +701,7 @@ static void __flush_dcache_segment_4way(unsigned long start, base_addr = ((base_addr >> 16) << 16); base_addr |= start; - dcache = ¤t_cpu_data.dcache; + dcache = &boot_cpu_data.dcache; linesz = dcache->linesz; way_incr = dcache->way_incr; way_size = dcache->way_size; diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index ae039f2..a81dbdb 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -141,47 +141,38 @@ ENTRY(__copy_user_page) .long 9999b, 6000f ; \ .previous ENTRY(__copy_user) - tst r6,r6 ! Check explicitly for zero - bf 1f - rts - mov #0,r0 ! normal return -1: - mov.l r10,@-r15 - mov.l r9,@-r15 - mov.l r8,@-r15 + ! Check if small number of bytes + mov #11,r0 mov r4,r3 - add r6,r3 ! last destination address - mov #12,r0 ! Check if small number of bytes - cmp/gt r0,r6 - bt 2f - bra .L_cleanup_loop - nop -2: - neg r5,r0 ! Calculate bytes needed to align source + cmp/gt r0,r6 ! r6 (len) > r0 (11) + bf/s .L_cleanup_loop_no_pop + add r6,r3 ! last destination address + + ! Calculate bytes needed to align to src + mov.l r11,@-r15 + neg r5,r0 + mov.l r10,@-r15 add #4,r0 + mov.l r9,@-r15 and #3,r0 + mov.l r8,@-r15 tst r0,r0 - bt .L_jump - mov r0,r1 + bt 2f -.L_loop1: - ! Copy bytes to align source -EX( mov.b @r5+,r0 ) - dt r1 -EX( mov.b r0,@r4 ) +1: + ! Copy bytes to long word align src +EX( mov.b @r5+,r1 ) + dt r0 add #-1,r6 - bf/s .L_loop1 +EX( mov.b r1,@r4 ) + bf/s 1b add #1,r4 -.L_jump: - mov r6,r2 ! Calculate number of longwords to copy + ! Jump to appropriate routine depending on dest +2: mov #3,r1 + mov r6, r2 + and r4,r1 shlr2 r2 - tst r2,r2 - bt .L_cleanup - - mov r4,r0 ! Jump to appropriate routine - and #3,r0 - mov r0,r1 shll2 r1 mova .L_jump_tbl,r0 mov.l @(r0,r1),r1 @@ -195,43 +186,97 @@ EX( mov.b r0,@r4 ) .long .L_dest10 .long .L_dest11 +/* + * Come here if there are less than 12 bytes to copy + * + * Keep the branch target close, so the bf/s callee doesn't overflow + * and result in a more expensive branch being inserted. This is the + * fast-path for small copies, the jump via the jump table will hit the + * default slow-path cleanup. -PFM. + */ +.L_cleanup_loop_no_pop: + tst r6,r6 ! Check explicitly for zero + bt 1f + +2: +EX( mov.b @r5+,r0 ) + dt r6 +EX( mov.b r0,@r4 ) + bf/s 2b + add #1,r4 + +1: mov #0,r0 ! normal return +5000: + +# Exception handler: +.section .fixup, "ax" +6000: + mov.l 8000f,r1 + mov r3,r0 + jmp @r1 + sub r4,r0 + .align 2 +8000: .long 5000b + +.previous + rts + nop + ! Destination = 00 .L_dest00: - mov r2,r7 - shlr2 r7 - shlr r7 - tst r7,r7 - mov #7,r0 - bt/s 1f - and r0,r2 - .align 2 + ! Skip the large copy for small transfers + mov #(32+32-4), r0 + cmp/gt r6, r0 ! r0 (60) > r6 (len) + bt 1f + + ! Align dest to a 32 byte boundary + neg r4,r0 + add #0x20, r0 + and #0x1f, r0 + tst r0, r0 + bt 2f + + sub r0, r6 + shlr2 r0 +3: +EX( mov.l @r5+,r1 ) + dt r0 +EX( mov.l r1,@r4 ) + bf/s 3b + add #4,r4 + 2: EX( mov.l @r5+,r0 ) +EX( mov.l @r5+,r1 ) +EX( mov.l @r5+,r2 ) +EX( mov.l @r5+,r7 ) EX( mov.l @r5+,r8 ) EX( mov.l @r5+,r9 ) EX( mov.l @r5+,r10 ) -EX( mov.l r0,@r4 ) -EX( mov.l r8,@(4,r4) ) -EX( mov.l r9,@(8,r4) ) -EX( mov.l r10,@(12,r4) ) -EX( mov.l @r5+,r0 ) -EX( mov.l @r5+,r8 ) -EX( mov.l @r5+,r9 ) -EX( mov.l @r5+,r10 ) - dt r7 -EX( mov.l r0,@(16,r4) ) -EX( mov.l r8,@(20,r4) ) -EX( mov.l r9,@(24,r4) ) -EX( mov.l r10,@(28,r4) ) +EX( mov.l @r5+,r11 ) +EX( movca.l r0,@r4 ) + add #-32, r6 +EX( mov.l r1,@(4,r4) ) + mov #32, r0 +EX( mov.l r2,@(8,r4) ) + cmp/gt r6, r0 ! r0 (32) > r6 (len) +EX( mov.l r7,@(12,r4) ) +EX( mov.l r8,@(16,r4) ) +EX( mov.l r9,@(20,r4) ) +EX( mov.l r10,@(24,r4) ) +EX( mov.l r11,@(28,r4) ) bf/s 2b add #32,r4 - tst r2,r2 + +1: mov r6, r0 + shlr2 r0 + tst r0, r0 bt .L_cleanup 1: -EX( mov.l @r5+,r0 ) - dt r2 -EX( mov.l r0,@r4 ) +EX( mov.l @r5+,r1 ) + dt r0 +EX( mov.l r1,@r4 ) bf/s 1b add #4,r4 @@ -250,7 +295,7 @@ EX( mov.l r0,@r4 ) and r0,r2 2: dt r7 -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN EX( mov.l @r5+,r0 ) EX( mov.l @r5+,r1 ) EX( mov.l @r5+,r8 ) @@ -320,7 +365,7 @@ EX( mov.w r0,@(2,r4) ) 1: ! Read longword, write two words per iteration EX( mov.l @r5+,r0 ) dt r2 -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN EX( mov.w r0,@r4 ) shlr16 r0 EX( mov.w r0,@(2,r4) ) @@ -342,7 +387,7 @@ EX( mov.w r0,@r4 ) ! Read longword, write byte, word, byte per iteration EX( mov.l @r5+,r0 ) dt r2 -#ifdef __LITTLE_ENDIAN__ +#ifdef CONFIG_CPU_LITTLE_ENDIAN EX( mov.b r0,@r4 ) shlr8 r0 add #1,r4 @@ -379,6 +424,7 @@ EX( mov.b r0,@r4 ) .L_exit: mov #0,r0 ! normal return + 5000: # Exception handler: @@ -394,5 +440,6 @@ EX( mov.b r0,@r4 ) .previous mov.l @r15+,r8 mov.l @r15+,r9 + mov.l @r15+,r10 rts - mov.l @r15+,r10 + mov.l @r15+,r11 diff --git a/arch/sh/mm/fault-nommu.c b/arch/sh/mm/fault-nommu.c deleted file mode 100644 index c6f5b51..0000000 --- a/arch/sh/mm/fault-nommu.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * arch/sh/mm/fault-nommu.c - * - * Copyright (C) 2002 - 2007 Paul Mundt - * - * Based on linux/arch/sh/mm/fault.c: - * Copyright (C) 1999 Niibe Yutaka - * - * Released under the terms of the GNU GPL v2.0. - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/hardirq.h> -#include <linux/kprobes.h> -#include <asm/system.h> -#include <asm/ptrace.h> -#include <asm/kgdb.h> - -/* - * This routine handles page faults. It determines the address, - * and the problem, and then passes it off to one of the appropriate - * routines. - */ -asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, - unsigned long writeaccess, - unsigned long address) -{ - trace_hardirqs_on(); - local_irq_enable(); - -#if defined(CONFIG_SH_KGDB) - if (kgdb_nofault && kgdb_bus_err_hook) - kgdb_bus_err_hook(); -#endif - - /* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - * - */ - if (address < PAGE_SIZE) { - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); - } else { - printk(KERN_ALERT "Unable to handle kernel paging request"); - } - - printk(" at virtual address %08lx\n", address); - printk(KERN_ALERT "pc = %08lx\n", regs->pc); - - die("Oops", regs, writeaccess); - do_exit(SIGKILL); -} - -asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, - unsigned long writeaccess, - unsigned long address) -{ -#if defined(CONFIG_SH_KGDB) - if (kgdb_nofault && kgdb_bus_err_hook) - kgdb_bus_err_hook(); -#endif - - return (address >= TASK_SIZE); -} diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index a08a4a9..7d43758 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -145,7 +145,7 @@ repeat: ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos)); -#ifdef CONFIG_SH_WRITETHROUGH +#ifdef CONFIG_CACHE_WRITETHROUGH /* * When we are in 32-bit address extended mode, CCR.CB becomes * invalid, so care must be taken to manually adjust cacheable diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index f74cf66..2d1dd60 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -4,27 +4,14 @@ * SH-4 specific TLB operations * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt * * Released under the terms of the GNU GPL v2.0. */ -#include <linux/signal.h> -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> #include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/interrupt.h> - +#include <linux/io.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -34,22 +21,27 @@ void update_mmu_cache(struct vm_area_struct * vma, unsigned long flags; unsigned long pteval; unsigned long vpn; - struct page *page; - unsigned long pfn; /* Ptrace may call this routine. */ if (vma && current->active_mm != vma->vm_mm) return; - pfn = pte_pfn(pte); - if (pfn_valid(pfn)) { - page = pfn_to_page(pfn); - if (!test_bit(PG_mapped, &page->flags)) { - unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; - __flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE); - __set_bit(PG_mapped, &page->flags); +#ifndef CONFIG_CACHE_OFF + { + unsigned long pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + + if (!test_bit(PG_mapped, &page->flags)) { + unsigned long phys = pte_val(pte) & PTE_PHYS_MASK; + __flush_wback_region((void *)P1SEGADDR(phys), + PAGE_SIZE); + __set_bit(PG_mapped, &page->flags); + } } } +#endif local_irq_save(flags); @@ -57,16 +49,26 @@ void update_mmu_cache(struct vm_area_struct * vma, vpn = (address & MMU_VPN_MASK) | get_asid(); ctrl_outl(vpn, MMU_PTEH); - pteval = pte_val(pte); + pteval = pte.pte_low; /* Set PTEA register */ +#ifdef CONFIG_X2TLB + /* + * For the extended mode TLB this is trivial, only the ESZ and + * EPR bits need to be written out to PTEA, with the remainder of + * the protection bits (with the exception of the compat-mode SZ + * and PR bits, which are cleared) being written out in PTEL. + */ + ctrl_outl(pte.pte_high, MMU_PTEA); +#else if (cpu_data->flags & CPU_HAS_PTEA) /* TODO: make this look less hacky */ ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA); +#endif /* Set PTEL register */ pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ -#ifdef CONFIG_SH_WRITETHROUGH +#ifdef CONFIG_CACHE_WRITETHROUGH pteval |= _PAGE_WT; #endif /* conveniently, we want all the software flags to be 0 anyway */ @@ -93,4 +95,3 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) ctrl_outl(data, addr); back_to_P1(); } - |
