diff options
Diffstat (limited to 'arch/sh')
96 files changed, 4057 insertions, 1603 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1272048..9a854c8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -72,9 +72,6 @@ config SYS_SUPPORTS_NUMA config SYS_SUPPORTS_PCI bool -config ARCH_MAY_HAVE_PC_FDC - bool - config STACKTRACE_SUPPORT def_bool y @@ -170,6 +167,12 @@ config CPU_SUBTYPE_SH7263 select CPU_SH2A select CPU_HAS_FPU +config CPU_SUBTYPE_MXG + bool "Support MX-G processor" + select CPU_SH2A + help + Select MX-G if running on an R8A03022BG part. + # SH-3 Processor Support config CPU_SUBTYPE_SH7705 @@ -273,6 +276,14 @@ config CPU_SUBTYPE_SH4_202 # SH-4A Processor Support +config CPU_SUBTYPE_SH7723 + bool "Support SH7723 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SPARSEMEM_ENABLE + help + Select SH7723 if you have an SH-MobileR2 CPU. + config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A @@ -369,6 +380,14 @@ config SH_7619_SOLUTION_ENGINE Select 7619 SolutionEngine if configuring for a Hitachi SH7619 evaluation board. +config SH_7721_SOLUTION_ENGINE + bool "SolutionEngine7721" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7721 + help + Select 7721 SolutionEngine if configuring for a Hitachi SH7721 + evaluation board. + config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE @@ -428,14 +447,6 @@ config SH_DREAMCAST Select Dreamcast if configuring for a SEGA Dreamcast. More information at <http://www.linux-sh.org> -config SH_MPC1211 - bool "Interface MPC1211" - depends on CPU_SUBTYPE_SH7751 && BROKEN - help - CTP/PCI-SH02 is a CPU module computer that is produced - by Interface Corporation. - More information at <http://www.interface.co.jp> - config SH_SH03 bool "Interface CTP/PCI-SH03" depends on CPU_SUBTYPE_SH7751 @@ -563,7 +574,7 @@ config SH_TMU config SH_CMT def_bool y prompt "CMT timer support" - depends on CPU_SH2 + depends on CPU_SH2 && !CPU_SUBTYPE_MXG help This enables the use of the CMT as the system timer. @@ -581,6 +592,7 @@ config SH_TIMER_IRQ default "86" if CPU_SUBTYPE_SH7619 default "140" if CPU_SUBTYPE_SH7206 default "142" if CPU_SUBTYPE_SH7203 + default "238" if CPU_SUBTYPE_MXG default "16" config SH_PCLK_FREQ @@ -588,10 +600,10 @@ config SH_PCLK_FREQ default "27000000" if CPU_SUBTYPE_SH7343 default "31250000" if CPU_SUBTYPE_SH7619 default "32000000" if CPU_SUBTYPE_SH7722 - default "33333333" if CPU_SUBTYPE_SH7770 || \ + default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ - CPU_SUBTYPE_SH7263 + CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -636,8 +648,7 @@ source "arch/sh/drivers/Kconfig" endmenu config ISA_DMA_API - def_bool y - depends on SH_MPC1211 + bool menu "Kernel features" @@ -645,7 +656,7 @@ source kernel/Kconfig.hz config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on SUPERH32 && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -662,7 +673,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on SUPERH32 && EXPERIMENTAL help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels @@ -742,7 +753,7 @@ menu "Boot options" config ZERO_PAGE_OFFSET hex "Zero page offset" - default "0x00004000" if SH_MPC1211 || SH_SH03 + default "0x00004000" if SH_SH03 default "0x00010000" if PAGE_SIZE_64KB default "0x00002000" if PAGE_SIZE_8KB default "0x00001000" diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 5dcb74b..0f45498 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -7,6 +7,7 @@ source "lib/Kconfig.debug" config SH_STANDARD_BIOS bool "Use LinuxSH standard BIOS" + depends on SUPERH32 help Say Y here if your target has the gdb-sh-stub package from www.m17n.org (or any conforming standard LinuxSH BIOS) @@ -29,16 +30,17 @@ config EARLY_SCIF_CONSOLE config EARLY_SCIF_CONSOLE_PORT hex depends on EARLY_SCIF_CONSOLE - default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 - default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 - default "0xffea0000" if CPU_SUBTYPE_SH7785 - default "0xfffe8000" if CPU_SUBTYPE_SH7203 - default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 - default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 + default "0xf8420000" if CPU_SUBTYPE_SH7619 + default "0xff804000" if CPU_SUBTYPE_MXG default "0xffc30000" if CPU_SUBTYPE_SHX3 + default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ + CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 default "0xffe80000" if CPU_SH4 + default "0xffea0000" if CPU_SUBTYPE_SH7785 + default "0xfffe8000" if CPU_SUBTYPE_SH7203 + default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 default "0x00000000" config EARLY_PRINTK @@ -79,7 +81,7 @@ config DEBUG_STACK_USAGE config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && (MMU || BROKEN) help If you say Y here the kernel will use a 4Kb stacksize for the kernel stack attached to each process/thread. This facilitates diff --git a/arch/sh/Makefile b/arch/sh/Makefile index cffc92b..fb7b1b1 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -41,6 +41,8 @@ cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml +cflags-y += $(call cc-option,-mno-fdpic) + # # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that # support it, while -Wa,-dsp by itself limits the range of usable opcodes @@ -107,9 +109,9 @@ machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 +machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 machdir-$(CONFIG_SH_HP6XX) += hp6xx machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_MPC1211) += mpc1211 machdir-$(CONFIG_SH_SH03) += sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d diff --git a/arch/sh/boards/mpc1211/Makefile b/arch/sh/boards/mpc1211/Makefile deleted file mode 100644 index 8cd31b5..0000000 --- a/arch/sh/boards/mpc1211/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel -# - -obj-y := setup.o rtc.o - -obj-$(CONFIG_PCI) += pci.o - diff --git a/arch/sh/boards/mpc1211/pci.c b/arch/sh/boards/mpc1211/pci.c deleted file mode 100644 index 23849f7..0000000 --- a/arch/sh/boards/mpc1211/pci.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) - * - * (c) 2002-2003 Saito.K & Jeanne - * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares <mj@ucw.cz> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/mpc1211/pci.h> - -static struct resource mpcpci_io_resource = { - "MPCPCI IO", - 0x00000000, - 0xffffffff, - IORESOURCE_IO -}; - -static struct resource mpcpci_mem_resource = { - "MPCPCI mem", - 0x00000000, - 0xffffffff, - IORESOURCE_MEM -}; - -static struct pci_ops pci_direct_conf1; -struct pci_channel board_pci_channels[] = { - {&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, - {NULL, NULL, NULL, 0, 0}, -}; - -/* - * Direct access to PCI hardware... - */ - - -#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -/* - * Functions for accessing PCI configuration space with type 1 accesses - */ -static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) -{ - u32 word; - unsigned long flags; - - /* - * PCIPDR may only be accessed as 32 bit words, - * so we must do byte alignment by hand - */ - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,where), PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - - switch (size) { - case 1: - switch (where & 0x3) { - case 3: - *value = (u8)(word >> 24); - break; - case 2: - *value = (u8)(word >> 16); - break; - case 1: - *value = (u8)(word >> 8); - break; - default: - *value = (u8)word; - break; - } - break; - case 2: - switch (where & 0x3) { - case 3: - *value = (u16)(word >> 24); - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - *value |= ((word & 0xff) << 8); - break; - case 2: - *value = (u16)(word >> 16); - break; - case 1: - *value = (u16)(word >> 8); - break; - default: - *value = (u16)word; - break; - } - break; - case 4: - *value = word; - break; - } - PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); - return PCIBIOS_SUCCESSFUL; -} - -/* - * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation. - * We'll allow an odd byte offset, though it should be illegal. - */ -static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -{ - u32 word,mask = 0; - unsigned long flags; - u32 shift = (where & 3) * 8; - - if(size == 1) { - mask = ((1 << 8) - 1) << shift; // create the byte mask - } else if(size == 2){ - if(shift == 24) - return PCIBIOS_BAD_REGISTER_NUMBER; - mask = ((1 << 16) - 1) << shift; // create the word mask - } - local_irq_save(flags); - writel(CONFIG_CMD(bus,devfn,where), PCIPAR); - if(size == 4){ - writel(value, PCIPDR); - local_irq_restore(flags); - PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); - return PCIBIOS_SUCCESSFUL; - } - word = readl(PCIPDR); - word &= ~mask; - word |= ((value << shift) & mask); - writel(word, PCIPDR); - local_irq_restore(flags); - PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); - return PCIBIOS_SUCCESSFUL; -} - -#undef CONFIG_CMD - -static struct pci_ops pci_direct_conf1 = { - .read = pci_conf1_read, - .write = pci_conf1_write, -}; - -static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) -{ - dev->resource[0].start = 0x1f0; - dev->resource[0].end = 0x1f7; - dev->resource[0].flags = IORESOURCE_IO; - dev->resource[1].start = 0x3f6; - dev->resource[1].end = 0x3f6; - dev->resource[1].flags = IORESOURCE_IO; - dev->resource[2].start = 0x170; - dev->resource[2].end = 0x177; - dev->resource[2].flags = IORESOURCE_IO; - dev->resource[3].start = 0x376; - dev->resource[3].end = 0x376; - dev->resource[3].flags = IORESOURCE_IO; - dev->resource[4].start = 0xf000; - dev->resource[4].end = 0xf00f; - dev->resource[4].flags = IORESOURCE_IO; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void __devinit pcibios_fixup_bus(struct pci_bus *b) -{ - pci_read_bridge_bases(b); -} - -/* - * IRQ functions - */ -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin-1) + slot) % 4) + 1; -} - -static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) -{ - return (((pin-1) - slot) & 3) + 1; -} - -static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) -{ - unsigned long flags; - u8 pin = *pinp; - u32 word; - - for ( ; dev->bus->self; dev = dev->bus->self) { - if (!pin) - continue; - - if (dev->bus->number == 1) { - local_irq_save(flags); - writel(0x80000000 | 0x2c, PCIPAR); - word = readl(PCIPDR); - local_irq_restore(flags); - word >>= 16; - - if (word == 0x0001) - pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); - else - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - } else - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - } - - *pinp = pin; - - return PCI_SLOT(dev->devfn); -} - -static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - /* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ - if (dev->bus->number == 0) { - switch (slot) { - case 13: irq = 9; break; /* USB */ - case 22: irq = 10; break; /* LAN */ - default: irq = 0; break; - } - } else { - switch (pin) { - case 0: irq = 0; break; - case 1: irq = 7; break; - case 2: irq = 9; break; - case 3: irq = 10; break; - case 4: irq = 11; break; - } - } - - if( irq < 0 ) { - PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); - return irq; - } - - PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); - - return irq; -} - -void __init pcibios_fixup_irqs(void) -{ - pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); -} - -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start >= 0x10000UL) { - if ((start & 0xffffUL) < 0x4000UL) { - start = (start & 0xffff0000UL) + 0x4000UL; - } else if ((start & 0xffffUL) >= 0xf000UL) { - start = (start & 0xffff0000UL) + 0x10000UL; - } - res->start = start; - } else { - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } - } -} - diff --git a/arch/sh/boards/mpc1211/rtc.c b/arch/sh/boards/mpc1211/rtc.c deleted file mode 100644 index 03b123a..0000000 --- a/arch/sh/boards/mpc1211/rtc.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support - * - * Copyright (C) 2002 Saito.K & Jeanne - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/time.h> -#include <linux/bcd.h> -#include <linux/mc146818rtc.h> - -unsigned long get_cmos_time(void) -{ - unsigned int year, mon, day, hour, min, sec; - - spin_lock(&rtc_lock); - - do { - sec = CMOS_READ(RTC_SECONDS); - min = CMOS_READ(RTC_MINUTES); - hour = CMOS_READ(RTC_HOURS); - day = CMOS_READ(RTC_DAY_OF_MONTH); - mon = CMOS_READ(RTC_MONTH); - year = CMOS_READ(RTC_YEAR); - } while (sec != CMOS_READ(RTC_SECONDS)); - - if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(day); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - - spin_unlock(&rtc_lock); - - year += 1900; - if (year < 1970) - year += 100; - - return mktime(year, mon, day, hour, min, sec); -} - -void mpc1211_rtc_gettimeofday(struct timeval *tv) -{ - - tv->tv_sec = get_cmos_time(); - tv->tv_usec = 0; -} - -/* arc/i386/kernel/time.c */ -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -static int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - unsigned char save_control, save_freq_select; - - /* gets recalled with irq locally disabled */ - spin_lock(&rtc_lock); - save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ - CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); - - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ - CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - - cmos_minutes = CMOS_READ(RTC_MINUTES); - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) - BCD_TO_BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - cmos_minutes) < 30) { - if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { - BIN_TO_BCD(real_seconds); - BIN_TO_BCD(real_minutes); - } - CMOS_WRITE(real_seconds,RTC_SECONDS); - CMOS_WRITE(real_minutes,RTC_MINUTES); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - /* The following flags have to be released exactly in this order, - * otherwise the DS12887 (popular MC146818A clone with integrated - * battery and quartz) will not reset the oscillator and will not - * update precisely 500 ms later. You won't find this mentioned in - * the Dallas Semiconductor data sheets, but who believes data - * sheets anyway ... -- Markus Kuhn - */ - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - spin_unlock(&rtc_lock); - - return retval; -} - -int mpc1211_rtc_settimeofday(const struct timeval *tv) -{ - unsigned long nowtime = tv->tv_sec; - - return set_rtc_mmss(nowtime); -} - -void mpc1211_time_init(void) -{ - rtc_sh_get_time = mpc1211_rtc_gettimeofday; - rtc_sh_set_time = mpc1211_rtc_settimeofday; -} - diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c deleted file mode 100644 index fede363..0000000 --- a/arch/sh/boards/mpc1211/setup.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/arch/sh/boards/mpc1211/setup.c - * - * Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/hdreg.h> -#include <linux/ide.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <asm/io.h> -#include <asm/machvec.h> -#include <asm/mpc1211/mpc1211.h> -#include <asm/mpc1211/pci.h> -#include <asm/mpc1211/m1543c.h> - -/* ALI15X3 SMBus address offsets */ -#define SMBHSTSTS (0 + 0x3100) -#define SMBHSTCNT (1 + 0x3100) -#define SMBHSTSTART (2 + 0x3100) -#define SMBHSTCMD (7 + 0x3100) -#define SMBHSTADD (3 + 0x3100) -#define SMBHSTDAT0 (4 + 0x3100) -#define SMBHSTDAT1 (5 + 0x3100) -#define SMBBLKDAT (6 + 0x3100) - -/* Other settings */ -#define MAX_TIMEOUT 500 /* times 1/100 sec */ - -/* ALI15X3 command constants */ -#define ALI15X3_ABORT 0x04 -#define ALI15X3_T_OUT 0x08 -#define ALI15X3_QUICK 0x00 -#define ALI15X3_BYTE 0x10 -#define ALI15X3_BYTE_DATA 0x20 -#define ALI15X3_WORD_DATA 0x30 -#define ALI15X3_BLOCK_DATA 0x40 -#define ALI15X3_BLOCK_CLR 0x80 - -/* ALI15X3 status register bits */ -#define ALI15X3_STS_IDLE 0x04 -#define ALI15X3_STS_BUSY 0x08 -#define ALI15X3_STS_DONE 0x10 -#define ALI15X3_STS_DEV 0x20 /* device error */ -#define ALI15X3_STS_COLL 0x40 /* collision or no response */ -#define ALI15X3_STS_TERM 0x80 /* terminated by abort */ -#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */ - -static void __init pci_write_config(unsigned long busNo, - unsigned long devNo, - unsigned long fncNo, - unsigned long cnfAdd, - unsigned long cnfData) -{ - ctrl_outl((0x80000000 - + ((busNo & 0xff) << 16) - + ((devNo & 0x1f) << 11) - + ((fncNo & 0x07) << 8) - + (cnfAdd & 0xfc)), PCIPAR); - - ctrl_outl(cnfData, PCIPDR); -} - -/* - Initialize IRQ setting -*/ - -static unsigned char m_irq_mask = 0xfb; -static unsigned char s_irq_mask = 0xff; - -static void disable_mpc1211_irq(unsigned int irq) -{ - if( irq < 8) { - m_irq_mask |= (1 << irq); - outb(m_irq_mask,I8259_M_MR); - } else { - s_irq_mask |= (1 << (irq - 8)); - outb(s_irq_mask,I8259_S_MR); - } - -} - -static void enable_mpc1211_irq(unsigned int irq) -{ - if( irq < 8) { - m_irq_mask &= ~(1 << irq); - outb(m_irq_mask,I8259_M_MR); - } else { - s_irq_mask &= ~(1 << (irq - 8)); - outb(s_irq_mask,I8259_S_MR); - } -} - -static inline int mpc1211_irq_real(unsigned int irq) -{ - int value; - int irqmask; - - if ( irq < 8) { - irqmask = 1<<irq; - outb(0x0b,I8259_M_CR); /* ISR register */ - value = inb(I8259_M_CR) & irqmask; - outb(0x0a,I8259_M_CR); /* back ro the IPR reg */ - return value; - } - irqmask = 1<<(irq - 8); - outb(0x0b,I8259_S_CR); /* ISR register */ - value = inb(I8259_S_CR) & irqmask; - outb(0x0a,I8259_S_CR); /* back ro the IPR reg */ - return value; -} - -static void mask_and_ack_mpc1211(unsigned int irq) -{ - if(irq < 8) { - if(m_irq_mask & (1<<irq)){ - if(!mpc1211_irq_real(irq)){ - atomic_inc(&irq_err_count) - printk("spurious 8259A interrupt: IRQ %x\n",irq); - } - } else { - m_irq_mask |= (1<<irq); - } - inb(I8259_M_MR); /* DUMMY */ - outb(m_irq_mask,I8259_M_MR); /* disable */ - outb(0x60+irq,I8259_M_CR); /* EOI */ - - } else { - if(s_irq_mask & (1<<(irq - 8))){ - if(!mpc1211_irq_real(irq)){ - atomic_inc(&irq_err_count); - printk("spurious 8259A interrupt: IRQ %x\n",irq); - } - } else { - s_irq_mask |= (1<<(irq - 8)); - } - inb(I8259_S_MR); /* DUMMY */ - outb(s_irq_mask,I8259_S_MR); /* disable */ - outb(0x60+(irq-8),I8259_S_CR); /* EOI */ - outb(0x60+2,I8259_M_CR); - } -} - -static void end_mpc1211_irq(unsigned int irq) -{ - enable_mpc1211_irq(irq); -} - -static unsigned int startup_mpc1211_irq(unsigned int irq) -{ - enable_mpc1211_irq(irq); - return 0; -} - -static void shutdown_mpc1211_irq(unsigned int irq) -{ - disable_mpc1211_irq(irq); -} - -static struct hw_interrupt_type mpc1211_irq_type = { - .typename = "MPC1211-IRQ", - .startup = startup_mpc1211_irq, - .shutdown = shutdown_mpc1211_irq, - .enable = enable_mpc1211_irq, - .disable = disable_mpc1211_irq, - .ack = mask_and_ack_mpc1211, - .end = end_mpc1211_irq -}; - -static void make_mpc1211_irq(unsigned int irq) -{ - irq_desc[irq].chip = &mpc1211_irq_type; - irq_desc[irq].status = IRQ_DISABLED; - irq_desc[irq].action = 0; - irq_desc[irq].depth = 1; - disable_mpc1211_irq(irq); -} - -int mpc1211_irq_demux(int irq) -{ - unsigned int poll; - - if( irq == 2 ) { - outb(0x0c,I8259_M_CR); - poll = inb(I8259_M_CR); - if(poll & 0x80) { - irq = (poll & 0x07); - } - if( irq == 2) { - outb(0x0c,I8259_S_CR); - poll = inb(I8259_S_CR); - irq = (poll & 0x07) + 8; - } - } - return irq; -} - -static void __init init_mpc1211_IRQ(void) -{ - int i; - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 1 - * 4: serial 0 - * 5: printer - * 6: floppy - * 8: rtc - * 10: lan - * 12: mouse - * 14: ide0 - * 15: ide1 - */ - - pci_write_config(0,0,0,0x54, 0xb0b0002d); - outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */ - outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */ - outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */ - outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */ - outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */ - outb(0x02, I8259_S_MR); /* s icw3 slave id */ - outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/ - outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/ - outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */ - outb(0xff, I8259_S_MR); /* disable irq8--irq15 */ - - for ( i=0; i < 16; i++) { - if(i != 2) { - make_mpc1211_irq(i); - } - } -} - -static void delay1000(void) -{ - int i; - - for (i=0; i<1000; i++) - ctrl_delay(); -} - -static int put_smb_blk(unsigned char *p, int address, int command, int no) -{ - int temp; - int timeout; - int i; - - outb(0xff, SMBHSTSTS); - temp = inb(SMBHSTSTS); - for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) { - delay1000(); - temp = inb(SMBHSTSTS); - } - if (timeout >= MAX_TIMEOUT){ - return -1; - } - - outb(((address & 0x7f) << 1), SMBHSTADD); - outb(0xc0, SMBHSTCNT); - outb(command & 0xff, SMBHSTCMD); - outb(no & 0x1f, SMBHSTDAT0); - - for(i = 1; i <= no; i++) { - outb(*p++, SMBBLKDAT); - } - outb(0xff, SMBHSTSTART); - - temp = inb(SMBHSTSTS); - for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) { - delay1000(); - temp = inb(SMBHSTSTS); - } - if (timeout >= MAX_TIMEOUT) { - return -2; - } - if ( temp & ALI15X3_STS_ERR ){ - return -3; - } - return 0; -} - -static struct resource heartbeat_resources[] = { - [0] = { - .start = 0xa2000000, - .end = 0xa2000000, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device heartbeat_device = { - .name = "heartbeat", - .id = -1, - .num_resources = ARRAY_SIZE(heartbeat_resources), - .resource = heartbeat_resources, -}; - -static struct platform_device *mpc1211_devices[] __initdata = { - &heartbeat_device, -}; - -static int __init mpc1211_devices_setup(void) -{ - return platform_add_devices(mpc1211_devices, - ARRAY_SIZE(mpc1211_devices)); -} -__initcall(mpc1211_devices_setup); - -/* arch/sh/boards/mpc1211/rtc.c */ -void mpc1211_time_init(void); - -static void __init mpc1211_setup(char **cmdline_p) -{ - unsigned char spd_buf[128]; - - __set_io_port_base(PA_PCI_IO); - - pci_write_config(0,0,0,0x54, 0xb0b00000); - - do { - outb(ALI15X3_ABORT, SMBHSTCNT); - spd_buf[0] = 0x0c; - spd_buf[1] = 0x43; - spd_buf[2] = 0x7f; - spd_buf[3] = 0x03; - spd_buf[4] = 0x00; - spd_buf[5] = 0x03; - spd_buf[6] = 0x00; - } while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0); - - board_time_init = mpc1211_time_init; - - return 0; -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_mpc1211 __initmv = { - .mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)", - .mv_setup = mpc1211_setup, - .mv_nr_irqs = 48, - .mv_irq_demux = mpc1211_irq_demux, - .mv_init_irq = init_mpc1211_IRQ, -}; diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 21ab8c8..01af442 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -10,8 +10,15 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/i2c.h> +#include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/io.h> +#include <asm/sh_keysc.h> +#include <asm/migor.h> /* Address IRQ Size Bus Description * 0x00000000 64MB 16 NOR Flash (SP29PL256N) @@ -21,16 +28,21 @@ * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A) */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_HIGH, +}; + static struct resource smc91x_eth_resources[] = { [0] = { - .name = "smc91x-regs" , - .start = P2SEGADDR(0x10000300), - .end = P2SEGADDR(0x1000030f), + .name = "SMC91C111" , + .start = 0x10000300, + .end = 0x1000030f, .flags = IORESOURCE_MEM, }, [1] = { .start = 32, /* IRQ0 */ - .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + .flags = IORESOURCE_IRQ, }, }; @@ -38,21 +50,206 @@ static struct platform_device smc91x_eth_device = { .name = "smc91x", .num_resources = ARRAY_SIZE(smc91x_eth_resources), .resource = smc91x_eth_resources, + .dev = { + .platform_data = &smc91x_info, + }, +}; + +static struct sh_keysc_info sh_keysc_info = { + .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */ + .scan_timing = 3, + .delay = 5, + .keycodes = { + 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER, + 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1, + 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, + 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0, + 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD, + }, +}; + +static struct resource sh_keysc_resources[] = { + [0] = { + .start = 0x044b0000, + .end = 0x044b000f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 79, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_keysc_device = { + .name = "sh_keysc", + .num_resources = ARRAY_SIZE(sh_keysc_resources), + .resource = sh_keysc_resources, + .dev = { + .platform_data = &sh_keysc_info, + }, +}; + +static struct mtd_partition migor_nor_flash_partitions[] = +{ + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = (15 * 1024 * 1024), + }, + { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data migor_nor_flash_data = { + .width = 2, + .parts = migor_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions), +}; + +static struct resource migor_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x03ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device migor_nor_flash_device = { + .name = "physmap-flash", + .resource = migor_nor_flash_resources, + .num_resources = ARRAY_SIZE(migor_nor_flash_resources), + .dev = { + .platform_data = &migor_nor_flash_data, + }, +}; + +static struct mtd_partition migor_nand_flash_partitions[] = { + { + .name = "nanddata1", + .offset = 0x0, + .size = 512 * 1024 * 1024, + }, + { + .name = "nanddata2", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024 * 1024, + }, +}; + +static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, chip->IO_ADDR_W + 0x00400000); + else if (ctrl & NAND_ALE) + writeb(cmd, chip->IO_ADDR_W + 0x00800000); + else + writeb(cmd, chip->IO_ADDR_W); +} + +static int migor_nand_flash_ready(struct mtd_info *mtd) +{ + return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */ +} + +struct platform_nand_data migor_nand_flash_data = { + .chip = { + .nr_chips = 1, + .partitions = migor_nand_flash_partitions, + .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions), + .chip_delay = 20, + .part_probe_types = (const char *[]) { "cmdlinepart", NULL }, + }, + .ctrl = { + .dev_ready = migor_nand_flash_ready, + .cmd_ctrl = migor_nand_flash_cmd_ctl, + }, +}; + +static struct resource migor_nand_flash_resources[] = { + [0] = { + .name = "NAND Flash", + .start = 0x18000000, + .end = 0x18ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_nand_flash_device = { + .name = "gen_nand", + .resource = migor_nand_flash_resources, + .num_resources = ARRAY_SIZE(migor_nand_flash_resources), + .dev = { + .platform_data = &migor_nand_flash_data, + } }; static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, + &sh_keysc_device, + &migor_nor_flash_device, + &migor_nand_flash_device, +}; + +static struct i2c_board_info __initdata migor_i2c_devices[] = { + { + I2C_BOARD_INFO("rs5c372b", 0x32), + }, + { + I2C_BOARD_INFO("migor_ts", 0x51), + .irq = 38, /* IRQ6 */ + }, }; static int __init migor_devices_setup(void) { + i2c_register_board_info(0, migor_i2c_devices, + ARRAY_SIZE(migor_i2c_devices)); + return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); } __initcall(migor_devices_setup); static void __init migor_setup(char **cmdline_p) { - ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */ + /* SMC91C111 - Enable IRQ0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR); + + /* KEYSC */ + ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR); + ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR); + ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); + ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2); + + /* NAND Flash */ + ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); + ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, + BSC_CS6ABCR); + + /* I2C */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); + + /* Touch Panel - Enable IRQ6 */ + ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); + ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); + ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); } static struct sh_machine_vector mv_migor __initmv = { diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c index 1f8f073..ae1cfcb 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -18,38 +18,51 @@ enum { UNUSED = 0, /* board specific interrupt sources */ - AX88796, /* Ethernet controller */ - CF, /* Compact Flash */ - PSW, /* Push Switch */ - EXT1, /* EXT1n IRQ */ - EXT4, /* EXT4n IRQ */ + CF, /* Compact Flash */ + TP, /* Touch panel */ + SCIF1, /* FPGA SCIF1 */ + SCIF0, /* FPGA SCIF0 */ + SMBUS, /* SMBUS */ + RTC, /* RTC Alarm */ + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + + /* external bus connector */ + EXT1, EXT2, EXT4, EXT5, EXT6, }; static struct intc_vect vectors[] __initdata = { INTC_IRQ(CF, IRQ_CF), - INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(SCIF1, IRQ_SCIF1), + INTC_IRQ(SCIF0, IRQ_SCIF0), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(RTC, IRQ_RTC), INTC_IRQ(AX88796, IRQ_AX88796), - INTC_IRQ(EXT1, IRQ_EXT1), - INTC_IRQ(EXT4, IRQ_EXT4), + INTC_IRQ(PSW, IRQ_PSW), + + INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2), + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), }; static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4000000, 0, 16, /* IRLMSK */ - { 0, 0, 0, 0, CF, 0, 0, 0, - 0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } }, + { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS, + 0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } }, }; static unsigned char irl2irq[HL_NR_IRL] __initdata = { - 0, IRQ_CF, 0, 0, - 0, 0, 0, 0, - 0, IRQ_EXT4, 0, IRQ_EXT1, + 0, IRQ_CF, IRQ_TP, IRQ_SCIF1, + IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6, + IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1, 0, IRQ_AX88796, IRQ_PSW, }; static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7780mp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { printk(KERN_INFO "Using r7780mp interrupt controller.\n"); diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index bd34048..9d3921f 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -55,7 +55,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7780rp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if (ctrl_inw(0xa5000600)) { printk(KERN_INFO "Using r7780rp interrupt controller.\n"); diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index bf7ec10..896c045 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -64,7 +64,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, NULL, mask_registers, NULL, NULL); -unsigned char * __init highlander_init_irq_r7785rp(void) +unsigned char * __init highlander_plat_irq_setup(void) { if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) return NULL; diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 2f68bea..bc79afb 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -4,7 +4,7 @@ * Renesas Solutions Highlander Support. * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2005 - 2007 Paul Mundt + * Copyright (C) 2005 - 2008 Paul Mundt * * This contains support for the R7780RP-1, R7780MP, and R7785RP * Highlander modules. @@ -17,6 +17,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/types.h> +#include <linux/i2c.h> #include <net/ax88796.h> #include <asm/machvec.h> #include <asm/r7780rp.h> @@ -176,11 +177,37 @@ static struct platform_device ax88796_device = { .resource = ax88796_resources, }; +static struct resource smbus_resources[] = { + [0] = { + .start = PA_SMCR, + .end = PA_SMCR + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SMBUS, + .end = IRQ_SMBUS, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smbus_device = { + .name = "i2c-highlander", + .id = 0, + .num_resources = ARRAY_SIZE(smbus_resources), + .resource = smbus_resources, +}; + +static struct i2c_board_info __initdata highlander_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; static struct platform_device *r7780rp_devices[] __initdata = { &r8a66597_usb_host_device, &m66592_usb_peripheral_device, &heartbeat_device, + &smbus_device, #ifndef CONFIG_SH_R7780RP &ax88796_device, #endif @@ -199,12 +226,20 @@ static struct trapped_io cf_trapped_io = { static int __init r7780rp_devices_setup(void) { + int ret = 0; + #ifndef CONFIG_SH_R7780RP if (register_trapped_io(&cf_trapped_io) == 0) - platform_device_register(&cf_ide_device); + ret |= platform_device_register(&cf_ide_device); #endif - return platform_add_devices(r7780rp_devices, + + ret |= platform_add_devices(r7780rp_devices, ARRAY_SIZE(r7780rp_devices)); + + ret |= i2c_register_board_info(0, highlander_i2c_devices, + ARRAY_SIZE(highlander_i2c_devices)); + + return ret; } device_initcall(r7780rp_devices_setup); @@ -281,7 +316,7 @@ static void __init highlander_setup(char **cmdline_p) static unsigned char irl2irq[HL_NR_IRL]; -int highlander_irq_demux(int irq) +static int highlander_irq_demux(int irq) { if (irq >= HL_NR_IRL || !irl2irq[irq]) return irq; @@ -289,27 +324,9 @@ int highlander_irq_demux(int irq) return irl2irq[irq]; } -void __init highlander_init_irq(void) +static void __init highlander_init_irq(void) { - unsigned char *ucp = NULL; - - do { -#ifdef CONFIG_SH_R7780MP - ucp = highlander_init_irq_r7780mp(); - if (ucp) - break; -#endif -#ifdef CONFIG_SH_R7785RP - ucp = highlander_init_irq_r7785rp(); - if (ucp) - break; -#endif -#ifdef CONFIG_SH_R7780RP - ucp = highlander_init_irq_r7780rp(); - if (ucp) - break; -#endif - } while (0); + unsigned char *ucp = highlander_plat_irq_setup(); if (ucp) { plat_irq_setup_pins(IRQ_MODE_IRL3210); diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index f21ee49..2308e87 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> -#include <linux/serial_8250.h> #include <linux/sm501.h> #include <linux/sm501-regs.h> #include <linux/pm.h> @@ -109,28 +108,6 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; -#ifdef CONFIG_MFD_SM501 -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void __iomem *)0xb3e30000, - .mapbase = 0xb3e30000, - .iotype = UPIO_MEM, - .irq = IRQ_VOYAGER, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - .regshift = 2, - .uartclk = (9600 * 16), - }, - { 0 }, -}; - -static struct platform_device uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = uart_platform_data, - }, -}; - static struct resource sm501_resources[] = { [0] = { .start = 0x10000000, @@ -186,11 +163,7 @@ static struct sm501_platdata_fb sm501_fb_pdata = { }; static struct sm501_initdata sm501_initdata = { - .gpio_high = { - .set = 0x00001fe0, - .mask = 0x0, - }, - .devices = SM501_USE_USB_HOST, + .devices = SM501_USE_USB_HOST | SM501_USE_UART0, }; static struct sm501_platdata sm501_platform_data = { @@ -208,13 +181,8 @@ static struct platform_device sm501_device = { .resource = sm501_resources, }; -#endif /* CONFIG_MFD_SM501 */ - static struct platform_device *rts7751r2d_devices[] __initdata = { -#ifdef CONFIG_MFD_SM501 - &uart_device, &sm501_device, -#endif &heartbeat_device, &spi_sh_sci_device, }; @@ -234,7 +202,9 @@ static int __init rts7751r2d_devices_setup(void) { if (register_trapped_io(&cf_trapped_io) == 0) platform_device_register(&cf_ide_device); + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); + return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } @@ -275,16 +245,6 @@ static void __init rts7751r2d_setup(char **cmdline_p) sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; writel(readl(sm501_reg) | 0x00f107c0, sm501_reg); - - /* - * Power Mode Gate - Enable UART0 - */ - - sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE; - writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); - - sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE; - writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); } /* diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c index 5b3ee08..4fe84cc 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/se/7206/setup.c @@ -3,12 +3,13 @@ * linux/arch/sh/boards/se/7206/setup.c * * Copyright (C) 2006 Yoshinori Sato - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2008 Paul Mundt * * Hitachi 7206 SolutionEngine Support. */ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/smc91x.h> #include <asm/se7206.h> #include <asm/io.h> #include <asm/machvec.h> @@ -16,8 +17,9 @@ static struct resource smc91x_resources[] = { [0] = { - .start = 0x300, - .end = 0x300 + 0x020 - 1, + .name = "smc91x-regs", + .start = PA_SMSC + 0x300, + .end = PA_SMSC + 0x300 + 0x020 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -27,9 +29,18 @@ static struct resource smc91x_resources[] = { }, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/se/7721/Makefile new file mode 100644 index 0000000..7f09030 --- /dev/null +++ b/arch/sh/boards/se/7721/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c new file mode 100644 index 0000000..c4fdd62 --- /dev/null +++ b/arch/sh/boards/se/7721/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/se/7721/irq.c + * + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <asm/se7721.h> + +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + MRSHPC, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(MRSHPC, MRSHPC_IRQ0), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { FPGA_ILSR6, 0, 8, 4, /* IRLMSK */ + { 0, MRSHPC } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors, + NULL, NULL, prio_registers, NULL); + +/* + * Initialize IRQ setting + */ +void __init init_se7721_IRQ(void) +{ + /* PPCR */ + ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118); + + register_intc_controller(&intc_desc); + intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0); +} diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c new file mode 100644 index 0000000..1be3e92 --- /dev/null +++ b/arch/sh/boards/se/7721/setup.c @@ -0,0 +1,99 @@ +/* + * linux/arch/sh/boards/se/7721/setup.c + * + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <asm/machvec.h> +#include <asm/se7721.h> +#include <asm/io.h> +#include <asm/heartbeat.h> + +static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct resource cf_ide_resources[] = { + [0] = { + .start = PA_MRSHPC_IO + 0x1f0, + .end = PA_MRSHPC_IO + 0x1f0 + 8 , + .flags = IORESOURCE_IO, + }, + [1] = { + .start = PA_MRSHPC_IO + 0x1f0 + 0x206, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, + .flags = IORESOURCE_IO, + }, + [2] = { + .start = MRSHPC_IRQ0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_ide_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(cf_ide_resources), + .resource = cf_ide_resources, +}; + +static struct platform_device *se7721_devices[] __initdata = { + &cf_ide_device, + &heartbeat_device +}; + +static int __init se7721_devices_setup(void) +{ + return platform_add_devices(se7721_devices, + ARRAY_SIZE(se7721_devices)); +} +device_initcall(se7721_devices_setup); + +static void __init se7721_setup(char **cmdline_p) +{ + /* for USB */ + ctrl_outw(0x0000, 0xA405010C); /* PGCR */ + ctrl_outw(0x0000, 0xA405010E); /* PHCR */ + ctrl_outw(0x00AA, 0xA4050118); /* PPCR */ + ctrl_outw(0x0000, 0xA4050124); /* PSELA */ +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_se7721 __initmv = { + .mv_name = "Solution Engine 7721", + .mv_setup = se7721_setup, + .mv_nr_irqs = 109, + .mv_init_irq = init_se7721_IRQ, +}; diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index b1a3d9d..ede3957 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -13,10 +13,13 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> +#include <linux/input.h> +#include <linux/smc91x.h> #include <asm/machvec.h> #include <asm/se7722.h> #include <asm/io.h> #include <asm/heartbeat.h> +#include <asm/sh_keysc.h> /* Heartbeat */ static struct heartbeat_data heartbeat_data = { @@ -42,6 +45,10 @@ static struct platform_device heartbeat_device = { }; /* SMC91x */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + static struct resource smc91x_eth_resources[] = { [0] = { .name = "smc91x-regs" , @@ -62,6 +69,7 @@ static struct platform_device smc91x_eth_device = { .dev = { .dma_mask = NULL, /* don't use dma */ .coherent_dma_mask = 0xffffffff, + .platform_data = &smc91x_info, }, .num_resources = ARRAY_SIZE(smc91x_eth_resources), .resource = smc91x_eth_resources, @@ -92,10 +100,47 @@ static struct platform_device cf_ide_device = { .resource = cf_ide_resources, }; +static struct sh_keysc_info sh_keysc_info = { + .mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */ + .scan_timing = 3, + .delay = 5, + .keycodes = { /* SW1 -> SW30 */ + KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, + KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, + KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, + KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, + KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, + KEY_Z, + KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */ + }, +}; + +static struct resource sh_keysc_resources[] = { + [0] = { + .start = 0x044b0000, + .end = 0x044b000f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 79, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_keysc_device = { + .name = "sh_keysc", + .num_resources = ARRAY_SIZE(sh_keysc_resources), + .resource = sh_keysc_resources, + .dev = { + .platform_data = &sh_keysc_info, + }, +}; + static struct platform_device *se7722_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, &cf_ide_device, + &sh_keysc_device, }; static int __init se7722_devices_setup(void) @@ -136,6 +181,8 @@ static void __init se7722_setup(char **cmdline_p) ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */ ctrl_outw(0x0000, PORT_PYCR); ctrl_outw(0x0000, PORT_PZCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); } /* diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 3dda24d..89b4086 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -44,7 +44,7 @@ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ + -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ $(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index 6ac8d4a..c0d25fb 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -6,7 +6,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ head_32.o misc_32.o piggy.o -EXTRA_AFLAGS := -traditional OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 4334f2b..912f3e2 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -13,7 +13,6 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ head_64.o misc_64.o cache.o piggy.o -EXTRA_AFLAGS := -traditional OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \ $(obj)/cache.o diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S index a8399b0..06ac31f 100644 --- a/arch/sh/boot/compressed/head_32.S +++ b/arch/sh/boot/compressed/head_32.S @@ -7,7 +7,6 @@ .text -#include <linux/linkage.h> #include <asm/page.h> .global startup diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index 1d4ecbf..f72c198 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -13,7 +13,6 @@ * Modification for compressed loader: * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ -#include <linux/linkage.h> #include <asm/cache.h> #include <asm/cpu/mmu_context.h> #include <asm/cpu/registers.h> diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index f52db12..38f934a 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -226,7 +226,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index 9fa66d9..b68b6cd 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -231,7 +231,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=40000000 # diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index ee59008..287408b 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Wed Feb 6 21:52:20 2008 +# Linux kernel version: 2.6.26-rc3 +# Thu May 22 14:30:07 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,18 +37,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -61,11 +60,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -77,11 +78,15 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -105,7 +110,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -118,6 +122,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -135,6 +140,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -142,6 +148,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -255,7 +262,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -323,8 +329,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -376,7 +380,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -385,11 +472,13 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -461,6 +550,7 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -482,13 +572,20 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_SH_KEYSC=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -508,6 +605,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -531,16 +629,40 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_SH_MOBILE=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -553,12 +675,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -592,6 +724,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -608,6 +742,7 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -623,7 +758,9 @@ CONFIG_USB_G_SERIAL=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -640,15 +777,31 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -657,10 +810,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -673,13 +822,10 @@ CONFIG_RTC_DRV_SH=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -720,10 +866,13 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set @@ -743,6 +892,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -763,48 +913,77 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y @@ -812,6 +991,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig new file mode 100644 index 0000000..a0ebd43 --- /dev/null +++ b/arch/sh/configs/rsk7203_defconfig @@ -0,0 +1,841 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 13:02:42 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +CONFIG_CPU_SUBTYPE_SH7203=y +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_FPU=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_TIMER_IRQ=142 +CONFIG_SH_PCLK_FREQ=16670800 +CONFIG_SH_CLK_MD=0 +# CONFIG_TICK_ONESHOT is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000 +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_BOOTMEM=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 0d0cda90..6b34baa 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Sep 13 16:40:16 2007 +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 20:27:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -25,47 +27,82 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_DEVICE=y +# CONFIG_GROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MM_OWNER=y +CONFIG_CGROUP_MEM_RES_CTLR=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set @@ -81,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_CLASSIC_RCU is not set # # System type @@ -88,7 +126,10 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set CONFIG_CPU_SUBTYPE_SH7206=y +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -97,6 +138,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -105,14 +147,17 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -121,23 +166,25 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -183,13 +230,16 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_SH_CPU_FREQ is not set +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -213,11 +263,15 @@ CONFIG_HEARTBEAT=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_KEXEC is not set +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_GUSA=y # # Boot options @@ -225,25 +279,25 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel" +CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" # # Bus options # -# CONFIG_CF_ENABLER is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_SHARED_FLAT=y +CONFIG_BINFMT_MISC=y # # Networking @@ -253,14 +307,24 @@ CONFIG_NET=y # # Networking options # -# CONFIG_PACKET is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -273,14 +337,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -297,10 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -308,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -329,8 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -339,11 +401,9 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -356,6 +416,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -390,7 +451,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -418,13 +478,19 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_EEPROM_93CX6=y +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -443,23 +509,30 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -469,28 +542,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -502,6 +554,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -520,106 +573,119 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_SH=y # CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -642,10 +708,11 @@ CONFIG_ROMFS_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y -# CONFIG_SYSFS is not set -# CONFIG_TMPFS is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems @@ -658,18 +725,28 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -681,30 +758,20 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# - -# -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -712,7 +779,10 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_OBJECTS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -722,38 +792,123 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800 -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # # Security options # # CONFIG_KEYS is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index 84717d8..490dcbc 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -239,7 +239,6 @@ CONFIG_CPU_HAS_SR_RB=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 240a1ce..2dd83af 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -236,7 +236,6 @@ CONFIG_CPU_HAS_SR_RB=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=66666666 # diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig new file mode 100644 index 0000000..f3d4ca0 --- /dev/null +++ b/arch/sh/configs/se7721_defconfig @@ -0,0 +1,1085 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.25-rc5 +# Fri Mar 21 12:05:31 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_BUG is not set +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_SHMEM is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH3=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +CONFIG_CPU_SUBTYPE_SH7721=y +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_SH_FPU_EMU is not set +# CONFIG_SH_DSP is not set +# CONFIG_SH_ADC is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7721_SOLUTION_ENGINE=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2" + +# +# Bus options +# +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +CONFIG_INET_XFRM_TUNNEL=y +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=y +CONFIG_NET_SCH_HTB=y +CONFIG_NET_SCH_HFSC=y +CONFIG_NET_SCH_PRIO=y +# CONFIG_NET_SCH_RR is not set +CONFIG_NET_SCH_RED=y +CONFIG_NET_SCH_SFQ=y +CONFIG_NET_SCH_TEQL=y +CONFIG_NET_SCH_TBF=y +CONFIG_NET_SCH_GRED=y +CONFIG_NET_SCH_DSMARK=y +CONFIG_NET_SCH_NETEM=y + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +CONFIG_NET_CLS_TCINDEX=y +CONFIG_NET_CLS_ROUTE4=y +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=y +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_MV is not set +CONFIG_PATA_PLATFORM=y +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=2 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index c60b6fd..167786f 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -235,7 +235,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index ab77b0e..938817e3 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -154,4 +154,4 @@ module_exit(heartbeat_exit); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR("Paul Mundt"); -MODULE_LICENSE("GPLv2"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 07e2950..a83dcf7 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -15,8 +15,6 @@ #define PCI_PROBE_BIOS 1 #define PCI_PROBE_CONF1 2 #define PCI_PROBE_CONF2 4 -#define PCI_NO_SORT 0x100 -#define PCI_BIOS_SORT 0x200 #define PCI_NO_CHECKS 0x400 #define PCI_ASSIGN_ROMS 0x1000 #define PCI_BIOS_IRQ_SCAN 0x2000 diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 49b435c..08d2e73 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -191,8 +191,8 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) { - unsigned long start = pci_resource_start(dev, bar); - unsigned long len = pci_resource_len(dev, bar); + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); unsigned long flags = pci_resource_flags(dev, bar); if (unlikely(!len || !start)) diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 62bf373..4bbdce3 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -5,7 +5,7 @@ extra-y := head_32.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ - ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \ + ptrace_32.o setup.o signal_32.o sys_sh.o sys_sh32.o \ syscalls_32.o time_32.o topology.o traps.o traps_32.o obj-y += cpu/ timers/ diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 index e01283d..6edf53b 100644 --- a/arch/sh/kernel/Makefile_64 +++ b/arch/sh/kernel/Makefile_64 @@ -1,7 +1,7 @@ extra-y := head_64.o init_task.o vmlinux.lds obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ - ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \ + ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \ syscalls_64.o time_64.o topology.o traps.o traps_64.o obj-y += cpu/ timers/ diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c index dc6725c..57cf0e0 100644 --- a/arch/sh/kernel/asm-offsets.c +++ b/arch/sh/kernel/asm-offsets.c @@ -11,12 +11,9 @@ #include <linux/stddef.h> #include <linux/types.h> #include <linux/mm.h> -#include <asm/thread_info.h> - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) +#include <linux/kbuild.h> -#define BLANK() asm volatile("\n->" : : ) +#include <asm/thread_info.h> int main(void) { diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 1c3b996..01ff4d0 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -83,6 +83,8 @@ static int __init cf_init_default(void) #include <asm/se.h> #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) #include <asm/se7722.h> +#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE) +#include <asm/se7721.h> #endif /* @@ -99,7 +101,9 @@ static int __init cf_init_default(void) * 0xB0600000 : I/O */ -#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) +#if defined(CONFIG_SH_SOLUTION_ENGINE) || \ + defined(CONFIG_SH_7722_SOLUTION_ENGINE) || \ + defined(CONFIG_SH_7721_SOLUTION_ENGINE) static int __init cf_init_se(void) { if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0) @@ -112,7 +116,7 @@ static int __init cf_init_se(void) } /* - * PC-Card window open + * PC-Card window open * flag == COMMON/ATTRIBUTE/IO */ /* common window open */ @@ -122,7 +126,7 @@ static int __init cf_init_se(void) ctrl_outw(0x0b00, MRSHPC_MW0CR2); else /* common mode & bus width 16bit SWAP = 0*/ - ctrl_outw(0x0300, MRSHPC_MW0CR2); + ctrl_outw(0x0300, MRSHPC_MW0CR2); /* attribute window open */ ctrl_outw(0x8a85, MRSHPC_MW1CR1); @@ -155,10 +159,9 @@ static int __init cf_init_se(void) int __init cf_init(void) { - if( mach_is_se() || mach_is_7722se() ){ + if (mach_is_se() || mach_is_7722se() || mach_is_7721se()) return cf_init_se(); - } - + return cf_init_default(); } diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index d6e0e2b..79baa47 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -184,9 +184,8 @@ int intc_irq_describe(char* p, int irq) void __init plat_irq_setup(void) { - unsigned long long __dummy0, __dummy1=~0x00000000100000f0; + unsigned long long __dummy0, __dummy1=~0x00000000100000f0; unsigned long reg; - unsigned long data; int i; intc_virt = onchip_remap(INTC_BASE, 1024, "INTC"); @@ -196,11 +195,8 @@ void __init plat_irq_setup(void) /* Set default: per-line enable/disable, priority driven ack/eoi */ - for (i = 0; i < NR_INTC_IRQS; i++) { - if (platform_int_priority[i] != NO_PRIORITY) { - irq_desc[i].chip = &intc_irq_type; - } - } + for (i = 0; i < NR_INTC_IRQS; i++) + irq_desc[i].chip = &intc_irq_type; /* Disable all interrupts and set all priorities to 0 to avoid trouble */ @@ -211,35 +207,43 @@ void __init plat_irq_setup(void) ctrl_outl( NO_PRIORITY, reg); - /* Set IRLM */ - /* If all the priorities are set to 'no priority', then - * assume we are using encoded mode. - */ - irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \ - platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3]; - - if (irlm == NO_PRIORITY) { - /* IRLM = 0 */ - reg = INTC_ICR_CLEAR; - i = IRQ_INTA; - printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); - } else { - /* IRLM = 1 */ - reg = INTC_ICR_SET; - i = IRQ_IRL0; - } - ctrl_outl(INTC_ICR_IRLM, reg); - - /* Set interrupt priorities according to platform description */ - for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { - data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4); - if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { - /* Upon the 7th, set Priority Register */ - ctrl_outl(data, reg); - data = 0; - reg += 8; +#ifdef CONFIG_SH_CAYMAN + { + unsigned long data; + + /* Set IRLM */ + /* If all the priorities are set to 'no priority', then + * assume we are using encoded mode. + */ + irlm = platform_int_priority[IRQ_IRL0] + + platform_int_priority[IRQ_IRL1] + + platform_int_priority[IRQ_IRL2] + + platform_int_priority[IRQ_IRL3]; + if (irlm == NO_PRIORITY) { + /* IRLM = 0 */ + reg = INTC_ICR_CLEAR; + i = IRQ_INTA; + printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); + } else { + /* IRLM = 1 */ + reg = INTC_ICR_SET; + i = IRQ_IRL0; + } + ctrl_outl(INTC_ICR_IRLM, reg); + + /* Set interrupt priorities according to platform description */ + for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { + data |= platform_int_priority[i] << + ((i % INTC_INTPRI_PPREG) * 4); + if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { + /* Upon the 7th, set Priority Register */ + ctrl_outl(data, reg); + data = 0; + reg += 8; + } } } +#endif /* * And now let interrupts come in. diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index 84806b2..da5dae7 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -1,7 +1,7 @@ /* * Shared interrupt handling code for IPR and INTC2 types of IRQs. * - * Copyright (C) 2007 Magnus Damm + * Copyright (C) 2007, 2008 Magnus Damm * * Based on intc2.c and ipr.c * @@ -62,6 +62,9 @@ struct intc_desc_int { #endif static unsigned int intc_prio_level[NR_IRQS]; /* for now */ +#ifdef CONFIG_CPU_SH3 +static unsigned long ack_handle[NR_IRQS]; +#endif static inline struct intc_desc_int *get_intc_desc(unsigned int irq) { @@ -98,17 +101,26 @@ static void write_32(unsigned long addr, unsigned long h, unsigned long data) static void modify_8(unsigned long addr, unsigned long h, unsigned long data) { + unsigned long flags; + local_irq_save(flags); ctrl_outb(set_field(ctrl_inb(addr), data, h), addr); + local_irq_restore(flags); } static void modify_16(unsigned long addr, unsigned long h, unsigned long data) { + unsigned long flags; + local_irq_save(flags); ctrl_outw(set_field(ctrl_inw(addr), data, h), addr); + local_irq_restore(flags); } static void modify_32(unsigned long addr, unsigned long h, unsigned long data) { + unsigned long flags; + local_irq_save(flags); ctrl_outl(set_field(ctrl_inl(addr), data, h), addr); + local_irq_restore(flags); } enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 }; @@ -219,6 +231,25 @@ static void intc_disable(unsigned int irq) } } +#ifdef CONFIG_CPU_SH3 +static void intc_mask_ack(unsigned int irq) +{ + struct intc_desc_int *d = get_intc_desc(irq); + unsigned long handle = ack_handle[irq]; + unsigned long addr; + + intc_disable(irq); + + /* read register and write zero only to the assocaited bit */ + + if (handle) { + addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); + ctrl_inb(addr); + ctrl_outb(0x3f ^ set_field(0, 1, handle), addr); + } +} +#endif + static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp, unsigned int nr_hp, unsigned int irq) @@ -280,7 +311,12 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = { [IRQ_TYPE_EDGE_FALLING] = VALID(0), [IRQ_TYPE_EDGE_RISING] = VALID(1), [IRQ_TYPE_LEVEL_LOW] = VALID(2), + /* SH7706, SH7707 and SH7709 do not support high level triggered */ +#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7707) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7709) [IRQ_TYPE_LEVEL_HIGH] = VALID(3), +#endif }; static int intc_set_sense(unsigned int irq, unsigned int type) @@ -430,6 +466,40 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, return 0; } +#ifdef CONFIG_CPU_SH3 +static unsigned int __init intc_ack_data(struct intc_desc *desc, + struct intc_desc_int *d, + intc_enum enum_id) +{ + struct intc_mask_reg *mr = desc->ack_regs; + unsigned int i, j, fn, mode; + unsigned long reg_e, reg_d; + + for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) { + mr = desc->ack_regs + i; + + for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) { + if (mr->enum_ids[j] != enum_id) + continue; + + fn = REG_FN_MODIFY_BASE; + mode = MODE_ENABLE_REG; + reg_e = mr->set_reg; + reg_d = mr->set_reg; + + fn += (mr->reg_width >> 3) - 1; + return _INTC_MK(fn, mode, + intc_get_reg(d, reg_e), + intc_get_reg(d, reg_d), + 1, + (mr->reg_width - 1) - j); + } + } + + return 0; +} +#endif + static unsigned int __init intc_sense_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id) @@ -530,6 +600,11 @@ static void __init intc_register_irq(struct intc_desc *desc, /* irq should be disabled by default */ d->chip.mask(irq); + +#ifdef CONFIG_CPU_SH3 + if (desc->ack_regs) + ack_handle[irq] = intc_ack_data(desc, d, enum_id); +#endif } static unsigned int __init save_reg(struct intc_desc_int *d, @@ -560,6 +635,9 @@ void __init register_intc_controller(struct intc_desc *desc) d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; +#ifdef CONFIG_CPU_SH3 + d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0; +#endif d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); #ifdef CONFIG_SMP d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp)); @@ -592,14 +670,23 @@ void __init register_intc_controller(struct intc_desc *desc) } } - BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ - d->chip.name = desc->name; d->chip.mask = intc_disable; d->chip.unmask = intc_enable; d->chip.mask_ack = intc_disable; d->chip.set_type = intc_set_sense; +#ifdef CONFIG_CPU_SH3 + if (desc->ack_regs) { + for (i = 0; i < desc->nr_ack_regs; i++) + k += save_reg(d, k, desc->ack_regs[i].set_reg, 0); + + d->chip.mask_ack = intc_mask_ack; + } +#endif + + BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ + for (i = 0; i < desc->nr_vectors; i++) { struct intc_vect *vect = desc->vectors + i; diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index b279cdc..7e2b90c 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -8,6 +8,7 @@ common-y += $(addprefix ../sh2/, ex.o entry.o) obj-$(CONFIG_SH_FPU) += fpu.o -obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o -obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o -obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o +obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o +obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o +obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o +obj-$(CONFIG_CPU_SUBTYPE_MXG) += setup-mxg.o clock-sh7206.o diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c index ff99562..6df2fb9 100644 --- a/arch/sh/kernel/cpu/sh2a/fpu.c +++ b/arch/sh/kernel/cpu/sh2a/fpu.c @@ -13,6 +13,7 @@ #include <linux/signal.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/fpu.h> /* The PR (precision) bit in the FP Status Register must be clear when * an frchg instruction is executed, otherwise the instruction is undefined. @@ -299,7 +300,7 @@ static int denormal_addf(int hx, int hy) iy = hy & 0x7fffffff; if (iy < 0x00800000) { ix = denormal_subf1(ix, iy); - if (ix < 0) { + if ((int) ix < 0) { ix = -ix; sign ^= 0x80000000; } @@ -384,7 +385,7 @@ static long long denormal_addd(long long hx, long long hy) iy = hy & 0x7fffffffffffffffLL; if (iy < 0x0010000000000000LL) { ix = denormal_subd1(ix, iy); - if (ix < 0) { + if ((int) ix < 0) { ix = -ix; sign ^= 0x8000000000000000LL; } diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 6910e26..6e79132 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -29,6 +29,9 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.type = CPU_SH7206; /* While SH7206 has a DSP.. */ boot_cpu_data.flags |= CPU_HAS_DSP; +#elif defined(CONFIG_CPU_SUBTYPE_MXG) + boot_cpu_data.type = CPU_MXG; + boot_cpu_data.flags |= CPU_HAS_DSP; #endif boot_cpu_data.dcache.ways = 4; diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c new file mode 100644 index 0000000..e611d79 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -0,0 +1,168 @@ +/* + * Renesas MX-G (R8A03022BG) Setup + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/serial_sci.h> + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15, + + PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + + SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1, + + SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + + MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, + MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, + MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, + MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, + MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, + MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, + MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W, + + /* interrupt groups */ + PINT, SCIF0, SCIF1, + MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5 +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), + INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73), + INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75), + INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77), + INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79), + + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), + INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), + INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), + INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), + + INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95), + INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97), + INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99), + INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101), + + INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221), + INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223), + INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225), + INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227), + + INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229), + INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231), + INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233), + + INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235), + INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237), + INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239), + + INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241), + INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243), + + INTC_IRQ(MTU2_TGI3B, 244), + INTC_IRQ(MTU2_TGI3C, 245), + + INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247), + INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249), + INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251), + + INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253), + INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, + PINT4, PINT5, PINT6, PINT7), + INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, + MTU2_TCI0V, MTU2_TGI0E), + INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B, + MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A), + INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, + MTU2_TGI3A), + INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A, + MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), + INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W), + INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } }, + { 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } }, + { 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } }, + { 0xfffd9800, 0, 16, 4, /* IPR06 */ { } }, + { 0xfffd9802, 0, 16, 4, /* IPR07 */ { } }, + { 0xfffd9804, 0, 16, 4, /* IPR08 */ { } }, + { 0xfffd9806, 0, 16, 4, /* IPR09 */ { } }, + { 0xfffd9808, 0, 16, 4, /* IPR10 */ { } }, + { 0xfffd980a, 0, 16, 4, /* IPR11 */ { } }, + { 0xfffd980c, 0, 16, 4, /* IPR12 */ { } }, + { 0xfffd980e, 0, 16, 4, /* IPR13 */ { } }, + { 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } }, + { 0xfffd9812, 0, 16, 4, /* IPR15 */ + { SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } }, + { 0xfffd9814, 0, 16, 4, /* IPR16 */ + { MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } }, +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfffd9408, 0, 16, /* PINTER */ + { 0, 0, 0, 0, 0, 0, 0, 0, + PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups, + mask_registers, prio_registers, NULL); + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xff804000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 223, 220, 221, 222 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *mxg_devices[] __initdata = { + &sci_device, +}; + +static int __init mxg_devices_setup(void) +{ + return platform_add_devices(mxg_devices, + ARRAY_SIZE(mxg_devices)); +} +__initcall(mxg_devices_setup); + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 3ae4d91..511de55 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -2,7 +2,7 @@ # Makefile for the Linux/SuperH SH-3 backends. # -obj-y := ex.o probe.o entry.o +obj-y := ex.o probe.o entry.o setup-sh3.o # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o diff --git a/arch/sh/kernel/cpu/sh3/setup-sh3.c b/arch/sh/kernel/cpu/sh3/setup-sh3.c new file mode 100644 index 0000000..c988468 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/setup-sh3.c @@ -0,0 +1,71 @@ +/* + * Shared SH3 Setup code + * + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> + +/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */ + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, +}; + +static struct intc_vect vectors_irq0123[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), +}; + +static struct intc_vect vectors_irq45[] __initdata = { + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, + { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4000004, 0, 8, /* IRR0 */ + { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123", + vectors_irq0123, NULL, NULL, + prio_registers, sense_registers, ack_registers); + +static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45", + vectors_irq45, NULL, NULL, + prio_registers, sense_registers, ack_registers); + +#define INTC_ICR1 0xa4000010UL +#define INTC_ICR1_IRQLVL (1<<14) + +void __init plat_irq_setup_pins(int mode) +{ + if (mode == IRQ_MODE_IRQ) { + ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1); + register_intc_controller(&intc_desc_irq0123); + return; + } + BUG(); +} + +void __init plat_irq_setup_sh3(void) +{ + register_intc_controller(&intc_desc_irq45); +} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index f581534..6468ae8 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -37,7 +37,7 @@ enum { }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720), INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), @@ -48,7 +48,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(ADC_ADI, 0x980), INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40), INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20), - INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0), + INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460), INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), @@ -81,14 +81,6 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, NULL, prio_registers, NULL); -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), -}; - -static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL, - NULL, prio_registers, NULL); - static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xa4410000, @@ -159,16 +151,8 @@ static int __init sh7705_devices_setup(void) } __initcall(sh7705_devices_setup); -void __init plat_irq_setup_pins(int mode) -{ - if (mode == IRQ_MODE_IRQ) { - register_intc_controller(&intc_desc_irq); - return; - } - BUG(); -} - void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); + plat_irq_setup_sh3(); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index d3733b1..93c55e2 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -52,7 +52,7 @@ static struct intc_vect vectors[] __initdata = { #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), INTC_VECT(ADC_ADI, 0x980), @@ -104,18 +104,6 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, NULL, prio_registers, NULL); -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), -}; - -static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL, - NULL, prio_registers, NULL); -#endif - static struct resource rtc_resources[] = { [0] = { .start = 0xfffffec0, @@ -194,24 +182,12 @@ static int __init sh770x_devices_setup(void) } __initcall(sh770x_devices_setup); -#define INTC_ICR1 0xa4000010UL -#define INTC_ICR1_IRQLVL (1<<14) - -void __init plat_irq_setup_pins(int mode) +void __init plat_irq_setup(void) { - if (mode == IRQ_MODE_IRQ) { + register_intc_controller(&intc_desc); #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) - ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1); - register_intc_controller(&intc_desc_irq); - return; + plat_irq_setup_sh3(); #endif - } - BUG(); -} - -void __init plat_irq_setup(void) -{ - register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 7406c9a..77eee48 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -38,7 +38,7 @@ enum { }; static struct intc_vect vectors[] __initdata = { - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820), INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860), INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0), @@ -79,10 +79,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } }, { 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } }, - { 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } }, -#ifdef CONFIG_CPU_SUBTYPE_SH7710 - { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } }, -#endif + { 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } }, { 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } }, { 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } }, { 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } }, @@ -91,14 +88,6 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, NULL, prio_registers, NULL); -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), -}; - -static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL, - NULL, prio_registers, NULL); - static struct resource rtc_resources[] = { [0] = { .start = 0xa413fec0, @@ -170,16 +159,8 @@ static int __init sh7710_devices_setup(void) } __initcall(sh7710_devices_setup); -void __init plat_irq_setup_pins(int mode) -{ - if (mode == IRQ_MODE_IRQ) { - register_intc_controller(&intc_desc_irq); - return; - } - BUG(); -} - void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); + plat_irq_setup_sh3(); } diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 8028082..f807a21 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -19,10 +19,6 @@ #include <linux/serial_sci.h> #include <asm/rtc.h> -#define INTC_ICR1 0xA4140010UL -#define INTC_ICR_IRLM 0x4000 -#define INTC_ICR_IRQ (~INTC_ICR_IRLM) - static struct resource rtc_resources[] = { [0] = { .start = 0xa413fec0, @@ -170,6 +166,7 @@ enum { }; static struct intc_vect vectors[] __initdata = { + /* IRQ0->5 are handled in setup-sh3.c */ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0), @@ -214,11 +211,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } }, -#if defined(CONFIG_CPU_SUBTYPE_SH7720) { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } }, -#else - { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } }, -#endif { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } }, { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } }, { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } }, @@ -229,32 +222,8 @@ static struct intc_prio_reg prio_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, NULL, prio_registers, NULL); -static struct intc_sense_reg sense_registers[] __initdata = { - { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, -}; - -static struct intc_vect vectors_irq[] __initdata = { - INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), - INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), - INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), -}; - -static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq, - NULL, NULL, prio_registers, sense_registers); - -void __init plat_irq_setup_pins(int mode) -{ - switch (mode) { - case IRQ_MODE_IRQ: - ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1); - register_intc_controller(&intc_irq_desc); - break; - default: - BUG(); - } -} - void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); + plat_irq_setup_sh3(); } diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 817f993..8020796 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -16,6 +16,7 @@ #include <asm/cpu/fpu.h> #include <asm/processor.h> #include <asm/system.h> +#include <asm/fpu.h> /* The PR (precision) bit in the FP Status Register must be clear when * an frchg instruction is executed, otherwise the instruction is undefined. diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 9e89984..be49269 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -53,7 +53,7 @@ int __init detect_cpu_and_cache_system(void) /* * Setup some generic flags we can probe on SH-4A parts */ - if (((pvr >> 16) & 0xff) == 0x10) { + if (((pvr >> 24) & 0xff) == 0x10) { if ((cvr & 0x10000000) == 0) boot_cpu_data.flags |= CPU_HAS_DSP; @@ -126,17 +126,23 @@ int __init detect_cpu_and_cache_system(void) CPU_HAS_LLSC; break; case 0x3008: - if (prr == 0xa0 || prr == 0xa1) { - boot_cpu_data.type = CPU_SH7722; - boot_cpu_data.icache.ways = 4; - boot_cpu_data.dcache.ways = 4; - boot_cpu_data.flags |= CPU_HAS_LLSC; - } - else if (prr == 0x70) { + boot_cpu_data.icache.ways = 4; + boot_cpu_data.dcache.ways = 4; + boot_cpu_data.flags |= CPU_HAS_LLSC; + + switch (prr) { + case 0x50: + case 0x51: + boot_cpu_data.type = CPU_SH7723; + boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE; + break; + case 0x70: boot_cpu_data.type = CPU_SH7366; - boot_cpu_data.icache.ways = 4; - boot_cpu_data.dcache.ways = 4; - boot_cpu_data.flags |= CPU_HAS_LLSC; + break; + case 0xa0: + case 0xa1: + boot_cpu_data.type = CPU_SH7722; + break; } break; case 0x4000: /* 1st cut */ @@ -215,6 +221,12 @@ int __init detect_cpu_and_cache_system(void) * SH-4A's have an optional PIPT L2. */ if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) { + /* Bug if we can't decode the L2 info */ + BUG_ON(!(cvr & 0xf)); + + /* Silicon and specifications have clearly never met.. */ + cvr ^= 0xf; + /* * Size calculation is much more sensible * than it is for the L1. diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 5d890ac..a880e79 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o +obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o @@ -22,6 +23,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o +clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c index 805535a..27fa81b 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -26,7 +26,7 @@ static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, static void master_clk_init(struct clk *clk) { - clk->rate *= 36; + clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f]; } static struct clk_ops sh7785_master_clk_ops = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index b98b4bc..62ebccf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -17,12 +17,11 @@ static struct resource usbf_resources[] = { [0] = { .name = "m66592_udc", - .start = 0xA4480000, - .end = 0xA44800FF, + .start = 0x04480000, + .end = 0x044800FF, .flags = IORESOURCE_MEM, }, [1] = { - .name = "m66592_udc", .start = 65, .end = 65, .flags = IORESOURCE_IRQ, @@ -40,6 +39,26 @@ static struct platform_device usbf_device = { .resource = usbf_resources, }; +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -74,6 +93,7 @@ static struct platform_device sci_device = { static struct platform_device *sh7722_devices[] __initdata = { &usbf_device, + &iic_device, &sci_device, }; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c new file mode 100644 index 0000000..a0470f2 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -0,0 +1,335 @@ +/* + * SH7723 Setup + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/mm.h> +#include <linux/serial_sci.h> +#include <asm/mmzone.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + },{ + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + },{ + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + },{ + .mapbase = 0xa4e30000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 56, 56, 56, 56 }, + },{ + .mapbase = 0xa4e40000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 88, 88, 88, 88 }, + },{ + .mapbase = 0xa4e50000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCI, + .irqs = { 109, 109, 109, 109 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xa465fec0, + .end = 0xa465fec0 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 69, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 70, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 68, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct resource sh7723_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7723_usb_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sh7723_usb_host_resources), + .resource = sh7723_usb_host_resources, +}; + +static struct platform_device *sh7723_devices[] __initdata = { + &sci_device, + &rtc_device, + &sh7723_usb_host_device, +}; + +static int __init sh7723_devices_setup(void) +{ + return platform_add_devices(sh7723_devices, + ARRAY_SIZE(sh7723_devices)); +} +__initcall(sh7723_devices_setup); + +enum { + UNUSED=0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + HUDI, + DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3, + _2DG_TRI,_2DG_INI,_2DG_CEI, + DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3, + VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI, + SCIFA_SCIFA0, + VPU_VPUI, + TPU_TPUI, + ADC_ADI, + USB_USI0, + RTC_ATI,RTC_PRI,RTC_CUI, + DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR, + DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR, + KEYSC_KEYI, + SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2, + MSIOF_MSIOFI0,MSIOF_MSIOFI1, + SCIFA_SCIFA1, + FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I, + I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI, + SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2, + CMT_CMTI, + TSIF_TSIFI, + SIU_SIUI, + SCIFA_SCIFA2, + TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, + IRDA_IRDAI, + ATAPI_ATAPII, + SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2, + VEU2H1_VEU2HI, + LCDC_LCDCI, + TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2, + + /* interrupt groups */ + DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG, + SDHI1, RTC, DMAC1B, SDHI0, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0), + + INTC_VECT(DMAC1A_DEI0,0x700), + INTC_VECT(DMAC1A_DEI1,0x720), + INTC_VECT(DMAC1A_DEI2,0x740), + INTC_VECT(DMAC1A_DEI3,0x760), + + INTC_VECT(_2DG_TRI, 0x780), + INTC_VECT(_2DG_INI, 0x7A0), + INTC_VECT(_2DG_CEI, 0x7C0), + + INTC_VECT(DMAC0A_DEI0,0x800), + INTC_VECT(DMAC0A_DEI1,0x820), + INTC_VECT(DMAC0A_DEI2,0x840), + INTC_VECT(DMAC0A_DEI3,0x860), + + INTC_VECT(VIO_CEUI,0x880), + INTC_VECT(VIO_BEUI,0x8A0), + INTC_VECT(VIO_VEU2HI,0x8C0), + INTC_VECT(VIO_VOUI,0x8E0), + + INTC_VECT(SCIFA_SCIFA0,0x900), + INTC_VECT(VPU_VPUI,0x980), + INTC_VECT(TPU_TPUI,0x9A0), + INTC_VECT(ADC_ADI,0x9E0), + INTC_VECT(USB_USI0,0xA20), + + INTC_VECT(RTC_ATI,0xA80), + INTC_VECT(RTC_PRI,0xAA0), + INTC_VECT(RTC_CUI,0xAC0), + + INTC_VECT(DMAC1B_DEI4,0xB00), + INTC_VECT(DMAC1B_DEI5,0xB20), + INTC_VECT(DMAC1B_DADERR,0xB40), + + INTC_VECT(DMAC0B_DEI4,0xB80), + INTC_VECT(DMAC0B_DEI5,0xBA0), + INTC_VECT(DMAC0B_DADERR,0xBC0), + + INTC_VECT(KEYSC_KEYI,0xBE0), + INTC_VECT(SCIF_SCIF0,0xC00), + INTC_VECT(SCIF_SCIF1,0xC20), + INTC_VECT(SCIF_SCIF2,0xC40), + INTC_VECT(MSIOF_MSIOFI0,0xC80), + INTC_VECT(MSIOF_MSIOFI1,0xCA0), + INTC_VECT(SCIFA_SCIFA1,0xD00), + + INTC_VECT(FLCTL_FLSTEI,0xD80), + INTC_VECT(FLCTL_FLTENDI,0xDA0), + INTC_VECT(FLCTL_FLTREQ0I,0xDC0), + INTC_VECT(FLCTL_FLTREQ1I,0xDE0), + + INTC_VECT(I2C_ALI,0xE00), + INTC_VECT(I2C_TACKI,0xE20), + INTC_VECT(I2C_WAITI,0xE40), + INTC_VECT(I2C_DTEI,0xE60), + + INTC_VECT(SDHI0_SDHII0,0xE80), + INTC_VECT(SDHI0_SDHII1,0xEA0), + INTC_VECT(SDHI0_SDHII2,0xEC0), + + INTC_VECT(CMT_CMTI,0xF00), + INTC_VECT(TSIF_TSIFI,0xF20), + INTC_VECT(SIU_SIUI,0xF80), + INTC_VECT(SCIFA_SCIFA2,0xFA0), + + INTC_VECT(TMU0_TUNI0,0x400), + INTC_VECT(TMU0_TUNI1,0x420), + INTC_VECT(TMU0_TUNI2,0x440), + + INTC_VECT(IRDA_IRDAI,0x480), + INTC_VECT(ATAPI_ATAPII,0x4A0), + + INTC_VECT(SDHI1_SDHII0,0x4E0), + INTC_VECT(SDHI1_SDHII1,0x500), + INTC_VECT(SDHI1_SDHII2,0x520), + + INTC_VECT(VEU2H1_VEU2HI,0x560), + INTC_VECT(LCDC_LCDCI,0x580), + + INTC_VECT(TMU1_TUNI0,0x920), + INTC_VECT(TMU1_TUNI1,0x940), + INTC_VECT(TMU1_TUNI2,0x960), + +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3), + INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3), + INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI), + INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR), + INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I), + INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI), + INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI), + INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2), + INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI), + INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR), + INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */ + { 0, TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} }, + { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ + { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } }, + { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */ + { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } }, + { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */ + { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } }, + { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */ + { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } }, + { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */ + { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } }, + { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */ + { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } }, + { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */ + { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, + { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ + { 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } }, + { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ + { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } }, + { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ + { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } }, + { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */ + { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } }, + { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */ + { 0,0,0,0,0,0,0,ATAPI_ATAPII } }, + { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} }, + { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} }, + { 0xa408000c, 0, 16, 4, /* IPRD */ { } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa414001c, 16, 2, /* ICR1 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups, + mask_registers, prio_registers, sense_registers); + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 07c988d..f189a55 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -231,12 +231,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ { 0, 0, 0, 0, 0, 0, GPIO, 0, @@ -270,11 +264,10 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ - static struct intc_vect irq_vectors[] __initdata = { INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), @@ -298,11 +291,11 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); -/* External interrupt pins in IRL mode */ +/* External interrupt pins in IRL mode */ static struct intc_vect irl_vectors[] __initdata = { INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), @@ -332,10 +325,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors, - NULL, NULL, irl7654_mask_registers, NULL, NULL); + NULL, irl7654_mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors, - NULL, NULL, irl3210_mask_registers, NULL, NULL); + NULL, irl3210_mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index b9cec48..b73578e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -1,7 +1,7 @@ /* * SH7770 Setup * - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -29,6 +29,41 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 63, 63, 63, 63 }, }, { + .mapbase = 0xff926000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 64, 64, 64, 64 }, + }, { + .mapbase = 0xff927000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 65, 65, 65, 65 }, + }, { + .mapbase = 0xff928000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 66, 66, 66, 66 }, + }, { + .mapbase = 0xff929000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 67, 67, 67, 67 }, + }, { + .mapbase = 0xff92a000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 68, 68, 68, 68 }, + }, { + .mapbase = 0xff92b000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 69, 69, 69, 69 }, + }, { + .mapbase = 0xff92c000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 70, 70, 70, 70 }, + }, { .flags = 0, } }; diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index ba87501..05372ed 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -143,12 +143,22 @@ resvec_save_area: trap_jtable: .long do_exception_error /* 0x000 */ .long do_exception_error /* 0x020 */ +#ifdef CONFIG_MMU .long tlb_miss_load /* 0x040 */ .long tlb_miss_store /* 0x060 */ +#else + .long do_exception_error + .long do_exception_error +#endif ! ARTIFICIAL pseudo-EXPEVT setting .long do_debug_interrupt /* 0x080 */ +#ifdef CONFIG_MMU .long tlb_miss_load /* 0x0A0 */ .long tlb_miss_store /* 0x0C0 */ +#else + .long do_exception_error + .long do_exception_error +#endif .long do_address_error_load /* 0x0E0 */ .long do_address_error_store /* 0x100 */ #ifdef CONFIG_SH_FPU @@ -185,10 +195,18 @@ trap_jtable: .endr .long do_IRQ /* 0xA00 */ .long do_IRQ /* 0xA20 */ +#ifdef CONFIG_MMU .long itlb_miss_or_IRQ /* 0xA40 */ +#else + .long do_IRQ +#endif .long do_IRQ /* 0xA60 */ .long do_IRQ /* 0xA80 */ +#ifdef CONFIG_MMU .long itlb_miss_or_IRQ /* 0xAA0 */ +#else + .long do_IRQ +#endif .long do_exception_error /* 0xAC0 */ .long do_address_error_exec /* 0xAE0 */ .rept 8 @@ -274,6 +292,7 @@ not_a_tlb_miss: * Instead of '.space 1024-TEXT_SIZE' place the RESVEC * block making sure the final alignment is correct. */ +#ifdef CONFIG_MMU tlb_miss: synco /* TAKum03020 (but probably a good idea anyway.) */ putcon SP, KCR1 @@ -377,6 +396,9 @@ fixup_to_invoke_general_handler: getcon KCR1, SP pta handle_exception, tr0 blink tr0, ZERO +#else /* CONFIG_MMU */ + .balign 256 +#endif /* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE DOES END UP AT VBR+0x600 */ @@ -1103,6 +1125,7 @@ restore_all: * fpu_error_or_IRQ? is a helper to deflect to the right cause. * */ +#ifdef CONFIG_MMU tlb_miss_load: or SP, ZERO, r2 or ZERO, ZERO, r3 /* Read */ @@ -1132,6 +1155,7 @@ call_do_page_fault: movi do_page_fault, r6 ptabs r6, tr0 blink tr0, ZERO +#endif /* CONFIG_MMU */ fpu_error_or_IRQA: pta its_IRQ, tr0 @@ -1481,6 +1505,7 @@ poke_real_address_q: ptabs LINK, tr0 blink tr0, r63 +#ifdef CONFIG_MMU /* * --- User Access Handling Section */ @@ -1604,6 +1629,7 @@ ___clear_user_exit: ptabs LINK, tr0 blink tr0, ZERO +#endif /* CONFIG_MMU */ /* * int __strncpy_from_user(unsigned long __dest, unsigned long __src, @@ -2014,9 +2040,11 @@ sa_default_restorer: .global asm_uaccess_start /* Just a marker */ asm_uaccess_start: +#ifdef CONFIG_MMU .long ___copy_user1, ___copy_user_exit .long ___copy_user2, ___copy_user_exit .long ___clear_user1, ___clear_user_exit +#endif .long ___strncpy_from_user1, ___strncpy_from_user_exit .long ___strnlen_user1, ___strnlen_user_exit .long ___get_user_asm_b1, ___get_user_asm_b_exit diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c index 30b76a9..dd4f51f 100644 --- a/arch/sh/kernel/cpu/sh5/fpu.c +++ b/arch/sh/kernel/cpu/sh5/fpu.c @@ -17,6 +17,7 @@ #include <asm/processor.h> #include <asm/user.h> #include <asm/io.h> +#include <asm/fpu.h> /* * Initially load the FPU with signalling NANS. This bit pattern diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c index 31f8cb0..92ad844 100644 --- a/arch/sh/kernel/cpu/sh5/probe.c +++ b/arch/sh/kernel/cpu/sh5/probe.c @@ -15,6 +15,7 @@ #include <linux/string.h> #include <asm/processor.h> #include <asm/cache.h> +#include <asm/tlb.h> int __init detect_cpu_and_cache_system(void) { @@ -67,5 +68,8 @@ int __init detect_cpu_and_cache_system(void) set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags)); #endif + /* Setup some I/D TLB defaults */ + sh64_tlb_init(); + return 0; } diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c index 4a8a408..1db7ce0 100644 --- a/arch/sh/kernel/dump_task.c +++ b/arch/sh/kernel/dump_task.c @@ -1,5 +1,6 @@ #include <linux/elfcore.h> #include <linux/sched.h> +#include <asm/fpu.h> /* * Capture the user space registers if the task is not running (in user space) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 957f2561..6b7d166 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -141,7 +141,9 @@ static void scif_sercon_init(char *s) */ static void scif_sercon_init(char *s) { + struct uart_port *port = &scif_port; unsigned baud = DEFAULT_BAUD; + unsigned int status; char *e; if (*s == ',') @@ -160,19 +162,25 @@ static void scif_sercon_init(char *s) baud = DEFAULT_BAUD; } - ctrl_outw(0, scif_port.mapbase + 8); - ctrl_outw(0, scif_port.mapbase); + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0); /* TE=0, RE=0 */ + sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + sci_out(port, SCSMR, 0); /* Set baud rate */ - ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1, scif_port.mapbase + 4); - - ctrl_outw(12, scif_port.mapbase + 24); - ctrl_outw(8, scif_port.mapbase + 24); - ctrl_outw(0, scif_port.mapbase + 32); - ctrl_outw(0x60, scif_port.mapbase + 16); - ctrl_outw(0, scif_port.mapbase + 36); - ctrl_outw(0x30, scif_port.mapbase + 8); + sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) / + (32 * baud) - 1); + udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ + + sci_out(port, SCSPTR, 0); + sci_out(port, SCxSR, 0x60); + sci_out(port, SCLSR, 0); + + sci_out(port, SCFCR, 0); + sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */ } #endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */ #endif /* !defined(CONFIG_SH_STANDARD_BIOS) */ diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 926b2e7..718bd23 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -1,9 +1,6 @@ -/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ - * - * linux/arch/sh/entry.S - * +/* * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -262,6 +259,7 @@ __restore_all: .align 2 syscall_badsys: ! Bad syscall number + get_current_thread_info r8, r0 mov #-ENOSYS, r0 bra resume_userspace mov.l r0, @(OFF_R0,r15) ! Return value @@ -281,7 +279,9 @@ debug_trap: mov.l 1f, r8 add r0, r8 mov.l @r8, r8 - jmp @r8 + jsr @r8 + nop + bra __restore_all nop .align 2 diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index d67d7ed..ae0a382 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -30,8 +30,8 @@ ENTRY(empty_zero_page) .long 0 /* RAMDISK_FLAGS */ .long 0x0200 /* ORIG_ROOT_DEV */ .long 1 /* LOADER_TYPE */ - .long 0x00360000 /* INITRD_START */ - .long 0x000a0000 /* INITRD_SIZE */ + .long 0x00000000 /* INITRD_START */ + .long 0x00000000 /* INITRD_SIZE */ #ifdef CONFIG_32BIT .long 0x53453f00 + 32 /* "SE?" = 32 bit */ #else diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c index f9bcc60..b151a25 100644 --- a/arch/sh/kernel/init_task.c +++ b/arch/sh/kernel/init_task.c @@ -8,7 +8,6 @@ #include <asm/pgtable.h> static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct pt_regs fake_swapper_regs; diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 9bf19b0..a2a99e4 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -200,8 +200,6 @@ void irq_ctx_exit(int cpu) hardirq_ctx[cpu] = NULL; } -extern asmlinkage void __do_softirq(void); - asmlinkage void do_softirq(void) { unsigned long flags; diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index d453c3a..bf8ac4c 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -274,8 +274,7 @@ static char *mem_to_hex(const char *mem, char *buf, const int count) } for (i = 0; i < count; i++) { ch = *mem++; - *buf++ = highhex(ch); - *buf++ = lowhex(ch); + buf = pack_hex_byte(buf, ch); } *buf = 0; return (buf); @@ -330,14 +329,6 @@ static char *ebin_to_mem(const char *buf, char *mem, int count) return mem; } -/* Pack a hex byte */ -static char *pack_hex_byte(char *pkt, int byte) -{ - *pkt++ = hexchars[(byte >> 4) & 0xf]; - *pkt++ = hexchars[(byte & 0xf)]; - return pkt; -} - /* Scan for the start char '$', read the packet and check the checksum */ static void get_packet(char *buffer, int buflen) { @@ -435,8 +426,8 @@ static void put_packet(char *buffer) /* '#' Separator, put high and low components of checksum */ put_debug_char('#'); - put_debug_char(highhex(checksum)); - put_debug_char(lowhex(checksum)); + put_debug_char(hex_asc_hi(checksum)); + put_debug_char(hex_asc_lo(checksum)); } while ((get_debug_char()) != '+'); /* While no ack */ } @@ -658,8 +649,8 @@ static void undo_single_step(void) static void send_signal_msg(const int signum) { out_buffer[0] = 'S'; - out_buffer[1] = highhex(signum); - out_buffer[2] = lowhex(signum); + out_buffer[1] = hex_asc_hi(signum); + out_buffer[2] = hex_asc_lo(signum); out_buffer[3] = 0; put_packet(out_buffer); } diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index b3d0a03..5482e65 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -30,6 +30,7 @@ #include <linux/fs.h> #include <linux/string.h> #include <linux/kernel.h> +#include <asm/unaligned.h> void *module_alloc(unsigned long size) { @@ -56,34 +57,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, return 0; } -#ifdef CONFIG_SUPERH32 -#define COPY_UNALIGNED_WORD(sw, tw, align) \ -{ \ - void *__s = &(sw), *__t = &(tw); \ - unsigned short *__s2 = __s, *__t2 = __t; \ - unsigned char *__s1 = __s, *__t1 = __t; \ - switch ((align)) \ - { \ - case 0: \ - *(unsigned long *) __t = *(unsigned long *) __s; \ - break; \ - case 2: \ - *__t2++ = *__s2++; \ - *__t2 = *__s2; \ - break; \ - default: \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1 = *__s1; \ - break; \ - } \ -} -#else -/* One thing SHmedia doesn't screw up! */ -#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); } -#endif - int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, @@ -96,7 +69,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, Elf32_Addr relocation; uint32_t *location; uint32_t value; - int align; pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); @@ -109,7 +81,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + ELF32_R_SYM(rel[i].r_info); relocation = sym->st_value + rel[i].r_addend; - align = (int)location & 3; #ifdef CONFIG_SUPERH64 /* For text addresses, bit2 of the st_other field indicates @@ -122,15 +93,15 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SH_DIR32: - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_REL32: relocation = (relocation - (Elf32_Addr) location); - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_IMM_LOW16: *location = (*location & ~0x3fffc00) | diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 9ab1926..b98e37a 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -25,6 +25,7 @@ #include <asm/pgalloc.h> #include <asm/system.h> #include <asm/ubc.h> +#include <asm/fpu.h> static int hlt_counter; int ubc_usercnt = 0; diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 046999b..0283d81 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -28,6 +28,7 @@ #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/mmu_context.h> +#include <asm/fpu.h> struct task_struct *last_task_used_math = NULL; diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index f6fbdfa..d453c47 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -33,6 +33,7 @@ #include <asm/system.h> #include <asm/processor.h> #include <asm/mmu_context.h> +#include <asm/fpu.h> /* This mask defines the bits of the SR which the user is not allowed to change, which are everything except S, Q, M, PR, SZ, FR. */ diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c deleted file mode 100644 index 184119e..0000000 --- a/arch/sh/kernel/semaphore.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Just taken from alpha implementation. - * This can't work well, perhaps. - */ -/* - * Generic semaphore code. Buyer beware. Do your own - * specific changes in <asm/semaphore-helper.h> - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/wait.h> -#include <linux/init.h> -#include <asm/semaphore.h> -#include <asm/semaphore-helper.h> - -DEFINE_SPINLOCK(semaphore_wake_lock); - -/* - * Semaphores are implemented using a two-way counter: - * The "count" variable is decremented for each process - * that tries to sleep, while the "waking" variable is - * incremented when the "up()" code goes to wake up waiting - * processes. - * - * Notably, the inline "up()" and "down()" functions can - * efficiently test if they need to do any extra work (up - * needs to do something only if count was negative before - * the increment operation. - * - * waking_non_zero() (from asm/semaphore.h) must execute - * atomically. - * - * When __up() is called, the count was negative before - * incrementing it, and we need to wake up somebody. - * - * This routine adds one to the count of processes that need to - * wake up and exit. ALL waiting processes actually wake up but - * only the one that gets to the "waking" field first will gate - * through and acquire the semaphore. The others will go back - * to sleep. - * - * Note that these functions are only called when there is - * contention on the lock, and as such all this is the - * "non-critical" part of the whole semaphore business. The - * critical part is the inline stuff in <asm/semaphore.h> - * where we want to avoid any extra jumps and calls. - */ -void __up(struct semaphore *sem) -{ - wake_one_more(sem); - wake_up(&sem->wait); -} - -/* - * Perform the "down" function. Return zero for semaphore acquired, - * return negative for signalled out of the function. - * - * If called from __down, the return is ignored and the wait loop is - * not interruptible. This means that a task waiting on a semaphore - * using "down()" cannot be killed until someone does an "up()" on - * the semaphore. - * - * If called from __down_interruptible, the return value gets checked - * upon return. If the return value is negative then the task continues - * with the negative value in the return register (it can be tested by - * the caller). - * - * Either form may be used in conjunction with "up()". - * - */ - -#define DOWN_VAR \ - struct task_struct *tsk = current; \ - wait_queue_t wait; \ - init_waitqueue_entry(&wait, tsk); - -#define DOWN_HEAD(task_state) \ - \ - \ - tsk->state = (task_state); \ - add_wait_queue(&sem->wait, &wait); \ - \ - /* \ - * Ok, we're set up. sem->count is known to be less than zero \ - * so we must wait. \ - * \ - * We can let go the lock for purposes of waiting. \ - * We re-acquire it after awaking so as to protect \ - * all semaphore operations. \ - * \ - * If "up()" is called before we call waking_non_zero() then \ - * we will catch it right away. If it is called later then \ - * we will have to go through a wakeup cycle to catch it. \ - * \ - * Multiple waiters contend for the semaphore lock to see \ - * who gets to gate through and who has to wait some more. \ - */ \ - for (;;) { - -#define DOWN_TAIL(task_state) \ - tsk->state = (task_state); \ - } \ - tsk->state = TASK_RUNNING; \ - remove_wait_queue(&sem->wait, &wait); - -void __sched __down(struct semaphore * sem) -{ - DOWN_VAR - DOWN_HEAD(TASK_UNINTERRUPTIBLE) - if (waking_non_zero(sem)) - break; - schedule(); - DOWN_TAIL(TASK_UNINTERRUPTIBLE) -} - -int __sched __down_interruptible(struct semaphore * sem) -{ - int ret = 0; - DOWN_VAR - DOWN_HEAD(TASK_INTERRUPTIBLE) - - ret = waking_non_zero_interruptible(sem, tsk); - if (ret) - { - if (ret == 1) - /* ret != 0 only if we get interrupted -arca */ - ret = 0; - break; - } - schedule(); - DOWN_TAIL(TASK_INTERRUPTIBLE) - return ret; -} - -int __down_trylock(struct semaphore * sem) -{ - return waking_non_zero_trylock(sem); -} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index ff4f54a..bca2bbc 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -23,6 +23,8 @@ #include <linux/kexec.h> #include <linux/module.h> #include <linux/smp.h> +#include <linux/err.h> +#include <linux/debugfs.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/page.h> @@ -51,6 +53,7 @@ EXPORT_SYMBOL(cpu_data); * sh_mv= on the command line, prior to .machvec.init teardown. */ struct sh_machine_vector sh_mv = { .mv_name = "generic", }; +EXPORT_SYMBOL(sh_mv); #ifdef CONFIG_VT struct screen_info screen_info; @@ -74,11 +77,18 @@ static struct resource data_resource = { .flags = IORESOURCE_BUSY | IORESOURCE_MEM, }; +static struct resource bss_resource = { + .name = "Kernel bss", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM, +}; + unsigned long memory_start; EXPORT_SYMBOL(memory_start); unsigned long memory_end = 0; EXPORT_SYMBOL(memory_end); +static struct resource mem_resources[MAX_NUMNODES]; + int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; static int __init early_parse_mem(char *p) @@ -167,6 +177,40 @@ static inline void __init reserve_crashkernel(void) {} #endif +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn) +{ + struct resource *res = &mem_resources[nid]; + + WARN_ON(res->name); /* max one active range per node for now */ + + res->name = "System RAM"; + res->start = start_pfn << PAGE_SHIFT; + res->end = (end_pfn << PAGE_SHIFT) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, res)) { + pr_err("unable to request memory_resource 0x%lx 0x%lx\n", + start_pfn, end_pfn); + return; + } + + /* + * We don't know which RAM region contains kernel data, + * so we try it repeatedly and let the resource manager + * test it. + */ + request_resource(res, &code_resource); + request_resource(res, &data_resource); + request_resource(res, &bss_resource); + +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + request_resource(res, &crashk_res); +#endif + + add_active_range(nid, start_pfn, end_pfn); +} + void __init setup_bootmem_allocator(unsigned long free_pfn) { unsigned long bootmap_size; @@ -179,7 +223,7 @@ void __init setup_bootmem_allocator(unsigned long free_pfn) bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn, min_low_pfn, max_low_pfn); - add_active_range(0, min_low_pfn, max_low_pfn); + __add_active_range(0, min_low_pfn, max_low_pfn); register_bootmem_low_pages(); node_set_online(0); @@ -248,6 +292,17 @@ void __init setup_arch(char **cmdline_p) ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); + printk(KERN_NOTICE "Boot params:\n" + "... MOUNT_ROOT_RDONLY - %08lx\n" + "... RAMDISK_FLAGS - %08lx\n" + "... ORIG_ROOT_DEV - %08lx\n" + "... LOADER_TYPE - %08lx\n" + "... INITRD_START - %08lx\n" + "... INITRD_SIZE - %08lx\n", + MOUNT_ROOT_RDONLY, RAMDISK_FLAGS, + ORIG_ROOT_DEV, LOADER_TYPE, + INITRD_START, INITRD_SIZE); + #ifdef CONFIG_BLK_DEV_RAM rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); @@ -265,6 +320,8 @@ void __init setup_arch(char **cmdline_p) code_resource.end = virt_to_phys(_etext)-1; data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; + bss_resource.start = virt_to_phys(__bss_start); + bss_resource.end = virt_to_phys(_ebss)-1; memory_start = (unsigned long)__va(__MEMORY_START); if (!memory_end) @@ -333,6 +390,7 @@ static const char *cpu_name[] = { [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", + [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", [CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown" }; @@ -443,3 +501,15 @@ const struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; #endif /* CONFIG_PROC_FS */ + +struct dentry *sh_debugfs_root; + +static int __init sh_debugfs_init(void) +{ + sh_debugfs_root = debugfs_create_dir("sh", NULL); + if (IS_ERR(sh_debugfs_root)) + return PTR_ERR(sh_debugfs_root); + + return 0; +} +arch_initcall(sh_debugfs_init); diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index d80de39..8f91653 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -9,7 +9,6 @@ #include <linux/pci.h> #include <linux/irq.h> #include <asm/sections.h> -#include <asm/semaphore.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/checksum.h> @@ -21,8 +20,6 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); extern struct hw_interrupt_type no_irq_type; -EXPORT_SYMBOL(sh_mv); - /* platform dependent support */ EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(kernel_thread); @@ -48,12 +45,6 @@ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(get_vm_area); #endif -/* semaphore exports */ -EXPORT_SYMBOL(__up); -EXPORT_SYMBOL(__down); -EXPORT_SYMBOL(__down_interruptible); -EXPORT_SYMBOL(__down_trylock); - EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); EXPORT_SYMBOL(__const_udelay); @@ -149,3 +140,4 @@ EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(_ebss); +EXPORT_SYMBOL(empty_zero_page); diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index dd38a68..9324d32 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -16,7 +16,7 @@ #include <linux/in6.h> #include <linux/interrupt.h> #include <linux/screen_info.h> -#include <asm/semaphore.h> +#include <asm/cacheflush.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/checksum.h> @@ -30,27 +30,50 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); EXPORT_SYMBOL(dump_fpu); EXPORT_SYMBOL(kernel_thread); +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) +EXPORT_SYMBOL(clear_user_page); +#endif + +#ifndef CONFIG_CACHE_OFF +EXPORT_SYMBOL(flush_dcache_page); +#endif + /* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_nocheck); +#ifdef CONFIG_IPV6 +EXPORT_SYMBOL(csum_ipv6_magic); +#endif #ifdef CONFIG_VT EXPORT_SYMBOL(screen_info); #endif -EXPORT_SYMBOL(__down); -EXPORT_SYMBOL(__down_trylock); -EXPORT_SYMBOL(__up); +EXPORT_SYMBOL(__put_user_asm_b); +EXPORT_SYMBOL(__put_user_asm_w); EXPORT_SYMBOL(__put_user_asm_l); +EXPORT_SYMBOL(__put_user_asm_q); +EXPORT_SYMBOL(__get_user_asm_b); +EXPORT_SYMBOL(__get_user_asm_w); EXPORT_SYMBOL(__get_user_asm_l); +EXPORT_SYMBOL(__get_user_asm_q); +EXPORT_SYMBOL(__strnlen_user); +EXPORT_SYMBOL(__strncpy_from_user); +EXPORT_SYMBOL(clear_page); +EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__copy_user); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); +EXPORT_SYMBOL(__const_udelay); /* Ugh. These come in from libgcc.a at link time. */ #define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) DECLARE_EXPORT(__sdivsi3); +DECLARE_EXPORT(__sdivsi3_2); DECLARE_EXPORT(__muldi3); DECLARE_EXPORT(__udivsi3); +DECLARE_EXPORT(__div_table); diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index f6b5fbf..f311551 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -29,6 +29,7 @@ #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/cacheflush.h> +#include <asm/fpu.h> #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 80bde19..552eb81 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -26,6 +26,7 @@ #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/cacheflush.h> +#include <asm/fpu.h> #define REG_RET 9 #define REG_ARG1 2 diff --git a/arch/sh/kernel/sys_sh64.c b/arch/sh/kernel/sys_sh64.c index 578004d..91fb844 100644 --- a/arch/sh/kernel/sys_sh64.c +++ b/arch/sh/kernel/sys_sh64.c @@ -31,23 +31,6 @@ #include <asm/unistd.h> /* - * sys_pipe() is the normal C calling standard for creating - * a pipe. It's not the way Unix traditionally does this, though. - */ -asmlinkage int sys_pipe(unsigned long * fildes) -{ - int fd[2]; - int error; - - error = do_pipe(fd); - if (!error) { - if (copy_to_user(fildes, fd, 2*sizeof(int))) - error = -EFAULT; - } - return error; -} - -/* * Do a system call from kernel instead of calling sys_execve so we * end up with proper pt_regs. */ diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 898977e..022a55f 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -172,6 +172,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_sec = sec; tv->tv_usec = usec; } +EXPORT_SYMBOL(do_gettimeofday); int do_settimeofday(struct timespec *tv) { @@ -240,7 +241,7 @@ static inline void do_timer_interrupt(void) * the irq version of write_lock because as just said we have irq * locally disabled. -arca */ - write_lock(&xtime_lock); + write_seqlock(&xtime_lock); asm ("getcon cr62, %0" : "=r" (current_ctc)); ctc_last_interrupt = (unsigned long) current_ctc; @@ -266,7 +267,7 @@ static inline void do_timer_interrupt(void) /* do it again in 60 s */ last_rtc_update = xtime.tv_sec - 600; } - write_unlock(&xtime_lock); + write_sequnlock(&xtime_lock); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index a3bdc68..438f1eb 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -4,6 +4,7 @@ #include <linux/kdebug.h> #include <linux/signal.h> #include <linux/sched.h> +#include <linux/uaccess.h> #include <asm/system.h> #ifdef CONFIG_BUG @@ -21,7 +22,14 @@ static void handle_BUG(struct pt_regs *regs) int is_valid_bugaddr(unsigned long addr) { - return addr >= PAGE_OFFSET; + unsigned short opcode; + + if (addr < PAGE_OFFSET) + return 0; + if (probe_kernel_address((u16 *)addr, opcode)) + return 0; + + return opcode == TRAPA_BUG_OPCODE; } #endif diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index baa4fa3..e08b3bf 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -25,6 +25,7 @@ #include <linux/limits.h> #include <asm/system.h> #include <asm/uaccess.h> +#include <asm/fpu.h> #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c index 1b58a74..a85831c 100644 --- a/arch/sh/kernel/traps_64.c +++ b/arch/sh/kernel/traps_64.c @@ -30,6 +30,7 @@ #include <asm/atomic.h> #include <asm/processor.h> #include <asm/pgtable.h> +#include <asm/fpu.h> #undef DEBUG_EXCEPTION #ifdef DEBUG_EXCEPTION diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/clear_page.S index 3539123..8342bfb 100644 --- a/arch/sh/lib/clear_page.S +++ b/arch/sh/lib/clear_page.S @@ -27,11 +27,11 @@ ENTRY(clear_page) mov #0,r0 ! 1: -#if defined(CONFIG_CPU_SH3) - mov.l r0,@r4 -#elif defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SH4) movca.l r0,@r4 mov r4,r1 +#else + mov.l r0,@r4 #endif add #32,r4 mov.l r0,@-r4 diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S index e002b91..5d12e65 100644 --- a/arch/sh/lib/copy_page.S +++ b/arch/sh/lib/copy_page.S @@ -41,11 +41,11 @@ ENTRY(copy_page) mov.l @r11+,r5 mov.l @r11+,r6 mov.l @r11+,r7 -#if defined(CONFIG_CPU_SH3) - mov.l r0,@r10 -#elif defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SH4) movca.l r0,@r10 mov r10,r0 +#else + mov.l r0,@r10 #endif add #32,r10 mov.l r7,@-r10 diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S index 560bc17..459fa92 100644 --- a/arch/sh/lib/memcpy-sh4.S +++ b/arch/sh/lib/memcpy-sh4.S @@ -126,10 +126,10 @@ mov.l r3,@-r0 ! 30 LS #else -3: mov r1,r3 ! OPQR +3: mov r7,r3 ! OPQR shlr8 r3 ! xOPQ - mov.l @(r0,r5),r1 ! KLMN - mov r1,r6 + mov.l @(r0,r5),r7 ! KLMN + mov r7,r6 shll16 r6 shll8 r6 ! Nxxx or r6,r3 ! NOPQ @@ -733,24 +733,24 @@ ENTRY(memcpy) movca.l r0,@r1 ! 40 LS (latency=3-7) add #-0x1c, r1 ! 50 EX - mov.l r3, @(0x1c,r1) ! 33 LS + mov.l r3, @(0x18,r1) ! 33 LS xtrct r11, r10 ! 48 EX - mov.l r6, @(0x18,r1) ! 33 LS + mov.l r6, @(0x14,r1) ! 33 LS xtrct r12, r11 ! 48 EX - mov.l r7, @(0x14,r1) ! 33 LS + mov.l r7, @(0x10,r1) ! 33 LS - mov.l r8, @(0x10,r1) ! 33 LS - add #-0x3e, r5 ! 50 EX + mov.l r8, @(0x0c,r1) ! 33 LS + add #-0x1e, r5 ! 50 EX - mov.l r9, @(0x0c,r1) ! 33 LS + mov.l r9, @(0x08,r1) ! 33 LS cmp/eq r2,r1 ! 54 MT - mov.l r10, @(0x08,r1) ! 33 LS + mov.l r10, @(0x04,r1) ! 33 LS bf/s 2b ! 109 BR - mov.l r11, @(0x04,r1) ! 33 LS + mov.l r11, @(0x00,r1) ! 33 LS #endif mov.l @r15+, r12 diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c index 75825ef..2fb8eaf 100644 --- a/arch/sh/lib64/dbg.c +++ b/arch/sh/lib64/dbg.c @@ -186,8 +186,8 @@ void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs) rr->pc = regs->pc; if (sp < stack_bottom + 3092) { - printk("evt_debug : stack underflow report\n"); int i, j; + printk("evt_debug : stack underflow report\n"); for (j=0, i = event_ptr; j<16; j++) { rr = event_ring + i; printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n", diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64 index cbd6aa3..0d92a8a 100644 --- a/arch/sh/mm/Makefile_64 +++ b/arch/sh/mm/Makefile_64 @@ -2,10 +2,11 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o extable_64.o consistent.o +obj-y := init.o consistent.o -mmu-y := tlb-nommu.o pg-nommu.o -mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o +mmu-y := tlb-nommu.o pg-nommu.o extable_32.o +mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \ + extable_64.o ifndef CONFIG_CACHE_OFF obj-y += cache-sh5.o diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index db6d950..c5b56d5 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -127,13 +127,13 @@ static int __init cache_debugfs_init(void) { struct dentry *dcache_dentry, *icache_dentry; - dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL, + dcache_dentry = debugfs_create_file("dcache", S_IRUSR, sh_debugfs_root, (unsigned int *)CACHE_TYPE_DCACHE, &cache_debugfs_fops); if (IS_ERR(dcache_dentry)) return PTR_ERR(dcache_dentry); - icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL, + icache_dentry = debugfs_create_file("icache", S_IRUSR, sh_debugfs_root, (unsigned int *)CACHE_TYPE_ICACHE, &cache_debugfs_fops); if (IS_ERR(icache_dentry)) { diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c index 3877321..9e277ec 100644 --- a/arch/sh/mm/cache-sh5.c +++ b/arch/sh/mm/cache-sh5.c @@ -714,6 +714,7 @@ void flush_cache_sigtramp(unsigned long vaddr) sh64_icache_inv_current_user_range(vaddr, end); } +#ifdef CONFIG_MMU /* * These *MUST* lie in an area of virtual address space that's otherwise * unused. @@ -830,3 +831,4 @@ void clear_user_page(void *to, unsigned long address, struct page *page) else sh64_clear_user_page_coloured(to, address); } +#endif diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 53dde06..d7df26b 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -307,15 +307,6 @@ void free_initrd_mem(unsigned long start, unsigned long end) #endif #ifdef CONFIG_MEMORY_HOTPLUG -void online_page(struct page *page) -{ - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - totalram_pages++; - num_physpages++; -} - int arch_add_memory(int nid, u64 start, u64 size) { pg_data_t *pgdat; diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index cea224c..6e0be24 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -343,6 +343,7 @@ unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *n return shmedia_alloc_io(phys, size, name); } +EXPORT_SYMBOL(onchip_remap); void onchip_unmap(unsigned long vaddr) { @@ -370,6 +371,7 @@ void onchip_unmap(unsigned long vaddr) kfree(res); } } +EXPORT_SYMBOL(onchip_unmap); #ifdef CONFIG_PROC_FS static int diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index 2de7302..1663199 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -59,7 +59,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) free_pfn = start_pfn = start >> PAGE_SHIFT; end_pfn = end >> PAGE_SHIFT; - add_active_range(nid, start_pfn, end_pfn); + __add_active_range(nid, start_pfn, end_pfn); /* Node-local pgdat */ NODE_DATA(nid) = pfn_to_kaddr(free_pfn); diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index ab81c60..0b0ec6e 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -393,7 +393,7 @@ static int __init pmb_debugfs_init(void) struct dentry *dentry; dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO, - NULL, NULL, &pmb_debugfs_fops); + sh_debugfs_root, NULL, &pmb_debugfs_fops); if (IS_ERR(dentry)) return PTR_ERR(dentry); diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index d63b93d..1bba7d3 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -21,13 +21,13 @@ HD64465 HD64465 7206SE SH_7206_SOLUTION_ENGINE 7343SE SH_7343_SOLUTION_ENGINE 7619SE SH_7619_SOLUTION_ENGINE -7722SE SH_7722_SOLUTION_ENGINE -7751SE SH_7751_SOLUTION_ENGINE +7721SE SH_7721_SOLUTION_ENGINE +7722SE SH_7722_SOLUTION_ENGINE +7751SE SH_7751_SOLUTION_ENGINE 7780SE SH_7780_SOLUTION_ENGINE 7751SYSTEMH SH_7751_SYSTEMH HP6XX SH_HP6XX DREAMCAST SH_DREAMCAST -MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 EDOSK7705 SH_EDOSK7705 SH4202_MICRODEV SH_SH4202_MICRODEV |
