diff options
Diffstat (limited to 'arch/sh/kernel')
| -rw-r--r-- | arch/sh/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/Makefile | 2 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/bus.c | 197 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/clock.c | 13 | ||||
| -rw-r--r-- | arch/sh/kernel/cpu/irq/ipr.c | 59 | ||||
| -rw-r--r-- | arch/sh/kernel/entry.S | 18 | ||||
| -rw-r--r-- | arch/sh/kernel/process.c | 54 | ||||
| -rw-r--r-- | arch/sh/kernel/setup.c | 51 |
8 files changed, 78 insertions, 318 deletions
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 7a86eeb..f05cd96 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -8,7 +8,7 @@ obj-y := process.o signal.o entry.o traps.o irq.o \ ptrace.o setup.o time.o sys_sh.o semaphore.o \ io.o io_generic.o sh_ksyms.o -obj-y += cpu/ +obj-y += cpu/ timers/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_CF_ENABLER) += cf-enabler.o diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index 5bfc33b..59d5b74 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -2,7 +2,7 @@ # Makefile for the Linux/SuperH CPU-specifc backends. # -obj-y += irq/ init.o bus.o clock.o +obj-y += irq/ init.o clock.o obj-$(CONFIG_CPU_SH2) += sh2/ obj-$(CONFIG_CPU_SH3) += sh3/ diff --git a/arch/sh/kernel/cpu/bus.c b/arch/sh/kernel/cpu/bus.c deleted file mode 100644 index fc6c4bd..0000000 --- a/arch/sh/kernel/cpu/bus.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * arch/sh/kernel/cpu/bus.c - * - * Virtual bus for SuperH. - * - * Copyright (C) 2004 Paul Mundt - * - * Shamelessly cloned from arch/arm/mach-omap/bus.c, which was written - * by: - * - * Copyright (C) 2003 - 2004 Nokia Corporation - * Written by Tony Lindgren <tony@atomide.com> - * Portions of code based on sa1111.c. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/init.h> -#include <linux/module.h> -#include <asm/bus-sh.h> - -static int sh_bus_match(struct device *dev, struct device_driver *drv) -{ - struct sh_driver *shdrv = to_sh_driver(drv); - struct sh_dev *shdev = to_sh_dev(dev); - - return shdev->dev_id == shdrv->dev_id; -} - -static int sh_bus_suspend(struct device *dev, pm_message_t state) -{ - struct sh_dev *shdev = to_sh_dev(dev); - struct sh_driver *shdrv = to_sh_driver(dev->driver); - - if (shdrv && shdrv->suspend) - return shdrv->suspend(shdev, state); - - return 0; -} - -static int sh_bus_resume(struct device *dev) -{ - struct sh_dev *shdev = to_sh_dev(dev); - struct sh_driver *shdrv = to_sh_driver(dev->driver); - - if (shdrv && shdrv->resume) - return shdrv->resume(shdev); - - return 0; -} - -static int sh_device_probe(struct device *dev) -{ - struct sh_dev *shdev = to_sh_dev(dev); - struct sh_driver *shdrv = to_sh_driver(dev->driver); - - if (shdrv && shdrv->probe) - return shdrv->probe(shdev); - - return -ENODEV; -} - -static int sh_device_remove(struct device *dev) -{ - struct sh_dev *shdev = to_sh_dev(dev); - struct sh_driver *shdrv = to_sh_driver(dev->driver); - - if (shdrv && shdrv->remove) - return shdrv->remove(shdev); - - return 0; -} - -static struct device sh_bus_devices[SH_NR_BUSES] = { - { - .bus_id = SH_BUS_NAME_VIRT, - }, -}; - -struct bus_type sh_bus_types[SH_NR_BUSES] = { - { - .name = SH_BUS_NAME_VIRT, - .match = sh_bus_match, - .probe = sh_bus_probe, - .remove = sh_bus_remove, - .suspend = sh_bus_suspend, - .resume = sh_bus_resume, - }, -}; - -int sh_device_register(struct sh_dev *dev) -{ - if (!dev) - return -EINVAL; - - if (dev->bus_id < 0 || dev->bus_id >= SH_NR_BUSES) { - printk(KERN_ERR "%s: bus_id invalid: %s bus: %d\n", - __FUNCTION__, dev->name, dev->bus_id); - return -EINVAL; - } - - dev->dev.parent = &sh_bus_devices[dev->bus_id]; - dev->dev.bus = &sh_bus_types[dev->bus_id]; - - /* This is needed for USB OHCI to work */ - if (dev->dma_mask) - dev->dev.dma_mask = dev->dma_mask; - if (dev->coherent_dma_mask) - dev->dev.coherent_dma_mask = dev->coherent_dma_mask; - - snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u", - dev->name, dev->dev_id); - - printk(KERN_INFO "Registering SH device '%s'. Parent at %s\n", - dev->dev.bus_id, dev->dev.parent->bus_id); - - return device_register(&dev->dev); -} - -void sh_device_unregister(struct sh_dev *dev) -{ - device_unregister(&dev->dev); -} - -int sh_driver_register(struct sh_driver *drv) -{ - if (!drv) - return -EINVAL; - - if (drv->bus_id < 0 || drv->bus_id >= SH_NR_BUSES) { - printk(KERN_ERR "%s: bus_id invalid: bus: %d device %d\n", - __FUNCTION__, drv->bus_id, drv->dev_id); - return -EINVAL; - } - - drv->drv.bus = &sh_bus_types[drv->bus_id]; - - return driver_register(&drv->drv); -} - -void sh_driver_unregister(struct sh_driver *drv) -{ - driver_unregister(&drv->drv); -} - -static int __init sh_bus_init(void) -{ - int i, ret = 0; - - for (i = 0; i < SH_NR_BUSES; i++) { - ret = device_register(&sh_bus_devices[i]); - if (ret != 0) { - printk(KERN_ERR "Unable to register bus device %s\n", - sh_bus_devices[i].bus_id); - continue; - } - - ret = bus_register(&sh_bus_types[i]); - if (ret != 0) { - printk(KERN_ERR "Unable to register bus %s\n", - sh_bus_types[i].name); - device_unregister(&sh_bus_devices[i]); - } - } - - printk(KERN_INFO "SH Virtual Bus initialized\n"); - - return ret; -} - -static void __exit sh_bus_exit(void) -{ - int i; - - for (i = 0; i < SH_NR_BUSES; i++) { - bus_unregister(&sh_bus_types[i]); - device_unregister(&sh_bus_devices[i]); - } -} - -module_init(sh_bus_init); -module_exit(sh_bus_exit); - -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); -MODULE_DESCRIPTION("SH Virtual Bus"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(sh_bus_types); -EXPORT_SYMBOL(sh_device_register); -EXPORT_SYMBOL(sh_device_unregister); -EXPORT_SYMBOL(sh_driver_register); -EXPORT_SYMBOL(sh_driver_unregister); - diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 989e7fd..97fa37f 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -38,9 +38,7 @@ static DECLARE_MUTEX(clock_list_sem); static struct clk master_clk = { .name = "master_clk", .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES, -#ifdef CONFIG_SH_PCLK_FREQ_BOOL .rate = CONFIG_SH_PCLK_FREQ, -#endif }; static struct clk module_clk = { @@ -227,16 +225,7 @@ int __init clk_init(void) { int i, ret = 0; - if (unlikely(!master_clk.rate)) - /* - * NOTE: This will break if the default divisor has been - * changed. - * - * No one should be changing the default on us however, - * expect that a sane value for CONFIG_SH_PCLK_FREQ will - * be defined in the event of a different divisor. - */ - master_clk.rate = get_timer_frequency() * 4; + BUG_ON(unlikely(!master_clk.rate)); for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) { struct clk *clk = onchip_clocks[i]; diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index fdbd718..e55150e 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -108,8 +108,7 @@ static void end_ipr_irq(unsigned int irq) enable_ipr_irq(irq); } -void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, - int priority, int maskpos) +void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) { disable_irq_nosync(irq); ipr_data[irq].addr = addr; @@ -123,44 +122,44 @@ void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, void __init init_IRQ(void) { #ifndef CONFIG_CPU_SUBTYPE_SH7780 - make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0); - make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0); + make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); + make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); #if defined(CONFIG_SH_RTC) - make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0); + make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); #endif #ifdef SCI_ERI_IRQ - make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); - make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); - make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0); + make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); #endif #ifdef SCIF1_ERI_IRQ - make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); - make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); - make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); - make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0); + make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0); + make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); + make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); + make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); #endif #ifdef SCIF_ERI_IRQ - make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); - make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); - make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); - make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0); + make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); #endif #ifdef IRDA_ERI_IRQ - make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); - make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); - make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); - make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0); + make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ @@ -175,12 +174,12 @@ void __init init_IRQ(void) * You should set corresponding bits of PFC to "00" * to enable these interrupts. */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0); - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0); - make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0); - make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0); + make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); + make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); + make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); + make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); + make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); + make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); #endif #endif diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S index fb636815..a440d36 100644 --- a/arch/sh/kernel/entry.S +++ b/arch/sh/kernel/entry.S @@ -16,6 +16,7 @@ #include <linux/config.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> +#include <asm/cpu/mmu_context.h> #include <asm/unistd.h> #if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) @@ -75,23 +76,6 @@ ENOSYS = 38 EINVAL = 22 -#if defined(CONFIG_CPU_SH3) -TRA = 0xffffffd0 -EXPEVT = 0xffffffd4 -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) -INTEVT = 0xa4000000 ! INTEVTE2(0xa4000000) -#else -INTEVT = 0xffffffd8 -#endif -MMU_TEA = 0xfffffffc ! TLB Exception Address Register -#elif defined(CONFIG_CPU_SH4) -TRA = 0xff000020 -EXPEVT = 0xff000024 -INTEVT = 0xff000028 -MMU_TEA = 0xff00000c ! TLB Exception Address Register -#endif - #if defined(CONFIG_KGDB_NMI) NMI_VEC = 0x1c0 ! Must catch early for debounce #endif diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index a4dc2b5..9fd1723 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -15,21 +15,18 @@ #include <linux/unistd.h> #include <linux/mm.h> #include <linux/elfcore.h> -#include <linux/slab.h> #include <linux/a.out.h> +#include <linux/slab.h> +#include <linux/pm.h> #include <linux/ptrace.h> #include <linux/platform.h> #include <linux/kallsyms.h> +#include <linux/kexec.h> #include <asm/io.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> #include <asm/elf.h> -#if defined(CONFIG_SH_HS7751RVOIP) -#include <asm/hs7751rvoip/hs7751rvoip.h> -#elif defined(CONFIG_SH_RTS7751R2D) -#include <asm/rts7751r2d/rts7751r2d.h> -#endif static int hlt_counter=0; @@ -37,6 +34,11 @@ int ubc_usercnt = 0; #define HARD_IDLE_TIMEOUT (HZ / 3) +void (*pm_idle)(void); + +void (*pm_power_off)(void); +EXPORT_SYMBOL(pm_power_off); + void disable_hlt(void) { hlt_counter++; @@ -51,17 +53,25 @@ void enable_hlt(void) EXPORT_SYMBOL(enable_hlt); +void default_idle(void) +{ + if (!hlt_counter) + cpu_sleep(); + else + cpu_relax(); +} + void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { - if (hlt_counter) { - while (!need_resched()) - cpu_relax(); - } else { - while (!need_resched()) - cpu_sleep(); - } + void (*idle)(void) = pm_idle; + + if (!idle) + idle = default_idle; + + while (!need_resched()) + idle(); preempt_enable_no_resched(); schedule(); @@ -88,28 +98,16 @@ void machine_restart(char * __unused) void machine_halt(void) { -#if defined(CONFIG_SH_HS7751RVOIP) - unsigned short value; + local_irq_disable(); - value = ctrl_inw(PA_OUTPORTR); - ctrl_outw((value & 0xffdf), PA_OUTPORTR); -#elif defined(CONFIG_SH_RTS7751R2D) - ctrl_outw(0x0001, PA_POWOFF); -#endif while (1) cpu_sleep(); } void machine_power_off(void) { -#if defined(CONFIG_SH_HS7751RVOIP) - unsigned short value; - - value = ctrl_inw(PA_OUTPORTR); - ctrl_outw((value & 0xffdf), PA_OUTPORTR); -#elif defined(CONFIG_SH_RTS7751R2D) - ctrl_outw(0x0001, PA_POWOFF); -#endif + if (pm_power_off) + pm_power_off(); } void show_regs(struct pt_regs * regs) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 036050b..a067a34 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -22,10 +22,10 @@ #include <linux/cpu.h> #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/io_generic.h> #include <asm/sections.h> #include <asm/irq.h> #include <asm/setup.h> +#include <asm/clock.h> #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> @@ -41,7 +41,7 @@ extern void * __rd_start, * __rd_end; * This value will be used at the very early stage of serial setup. * The bigger value means no problem. */ -struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 0, 10000000, }; +struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 10000000, }; struct screen_info screen_info; #if defined(CONFIG_SH_UNKNOWN) @@ -186,7 +186,7 @@ static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE], static int __init sh_mv_setup(char **cmdline_p) { -#if defined(CONFIG_SH_UNKNOWN) +#ifdef CONFIG_SH_UNKNOWN extern struct sh_machine_vector mv_unknown; #endif struct sh_machine_vector *mv = NULL; @@ -196,7 +196,7 @@ static int __init sh_mv_setup(char **cmdline_p) parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable); -#ifdef CONFIG_SH_GENERIC +#ifdef CONFIG_SH_UNKNOWN if (mv == NULL) { mv = &mv_unknown; if (*mv_name != '\0') { @@ -206,9 +206,6 @@ static int __init sh_mv_setup(char **cmdline_p) } sh_mv = *mv; #endif -#ifdef CONFIG_SH_UNKNOWN - sh_mv = mv_unknown; -#endif /* * Manually walk the vec, fill in anything that the board hasn't yet @@ -231,10 +228,8 @@ static int __init sh_mv_setup(char **cmdline_p) mv_set(readb); mv_set(readw); mv_set(readl); mv_set(writeb); mv_set(writew); mv_set(writel); - mv_set(ioremap); - mv_set(iounmap); - - mv_set(isa_port2addr); + mv_set(ioport_map); + mv_set(ioport_unmap); mv_set(irq_demux); #ifdef CONFIG_SH_UNKNOWN @@ -273,10 +268,10 @@ void __init setup_arch(char **cmdline_p) init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; - code_resource.start = virt_to_bus(_text); - code_resource.end = virt_to_bus(_etext)-1; - data_resource.start = virt_to_bus(_etext); - data_resource.end = virt_to_bus(_edata)-1; + code_resource.start = (unsigned long)virt_to_phys(_text); + code_resource.end = (unsigned long)virt_to_phys(_etext)-1; + data_resource.start = (unsigned long)virt_to_phys(_etext); + data_resource.end = (unsigned long)virt_to_phys(_edata)-1; sh_mv_setup(cmdline_p); @@ -435,6 +430,9 @@ static const char *cpu_name[] = { [CPU_ST40GX1] = "ST40GX1", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", + [CPU_SH7770] = "SH7770", + [CPU_SH7780] = "SH7780", + [CPU_SH7781] = "SH7781", [CPU_SH_NONE] = "Unknown" }; @@ -445,7 +443,7 @@ const char *get_cpu_subtype(void) #ifdef CONFIG_PROC_FS static const char *cpu_flags[] = { - "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", + "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr", "ptea", NULL }; static void show_cpuflags(struct seq_file *m) @@ -459,7 +457,7 @@ static void show_cpuflags(struct seq_file *m) return; } - for (i = 0; i < cpu_data->flags; i++) + for (i = 0; cpu_flags[i]; i++) if ((cpu_data->flags & (1 << i))) seq_printf(m, " %s", cpu_flags[i+1]); @@ -472,7 +470,8 @@ static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_in cache_size = info.ways * info.sets * info.linesz; - seq_printf(m, "%s size\t: %dKiB\n", type, cache_size >> 10); + seq_printf(m, "%s size\t: %2dKiB (%d-way)\n", + type, cache_size >> 10, info.ways); } /* @@ -511,21 +510,9 @@ static int show_cpuinfo(struct seq_file *m, void *v) boot_cpu_data.loops_per_jiffy/(500000/HZ), (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100); -#define PRINT_CLOCK(name, value) \ - seq_printf(m, name " clock\t: %d.%02dMHz\n", \ - ((value) / 1000000), ((value) % 1000000)/10000) - - PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock); - PRINT_CLOCK("bus", boot_cpu_data.bus_clock); -#ifdef CONFIG_CPU_SUBTYPE_ST40STB1 - PRINT_CLOCK("memory", boot_cpu_data.memory_clock); -#endif - PRINT_CLOCK("module", boot_cpu_data.module_clock); - - return 0; + return show_clocks(m); } - static void *c_start(struct seq_file *m, loff_t *pos) { return *pos < NR_CPUS ? cpu_data + *pos : NULL; @@ -596,7 +583,7 @@ static int __init kgdb_parse_options(char *options) options += map->namelen + 1; options = (*options == ',') ? options+1 : options; - + /* Read optional parameters (baud/parity/bits) */ baud = simple_strtoul(options, &options, 10); if (baud != 0) { |
