diff options
Diffstat (limited to 'arch/sh/kernel')
28 files changed, 1473 insertions, 743 deletions
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index ff30d7f..9104b62 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -20,5 +20,6 @@ obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 3e5fa1e..0758d48 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -29,7 +29,7 @@ * 0xB8001000 : Common Memory * 0xBA000000 : I/O */ -#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SH4) /* SH4 can't access PCMCIA interface through P2 area. * we must remap it with appropreate attribute bit of the page set. * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */ @@ -71,7 +71,7 @@ static int __init cf_init_default(void) /* You must have enabled the card, and set the level interrupt * before reaching this point. Possibly in boot ROM or boot loader. */ -#if defined(CONFIG_IDE) && defined(CONFIG_CPU_SH4) +#if defined(CONFIG_CPU_SH4) allocate_cf_area(); #endif #if defined(CONFIG_SH_UNKNOWN) @@ -84,15 +84,25 @@ static int __init cf_init_default(void) #if defined(CONFIG_SH_SOLUTION_ENGINE) #include <asm/se.h> +#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) +#include <asm/se7722.h> +#endif /* - * SolutionEngine + * SolutionEngine Seriese * + * about MS770xSE * 0xB8400000 : Common Memory * 0xB8500000 : Attribute * 0xB8600000 : I/O + * + * about MS7722SE + * 0xB0400000 : Common Memory + * 0xB0500000 : Attribute + * 0xB0600000 : I/O */ +#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) static int __init cf_init_se(void) { if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0) @@ -109,7 +119,7 @@ static int __init cf_init_se(void) * flag == COMMON/ATTRIBUTE/IO */ /* common window open */ - ctrl_outw(0x8a84, MRSHPC_MW0CR1);/* window 0xb8400000 */ + ctrl_outw(0x8a84, MRSHPC_MW0CR1); if((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) /* common mode & bus width 16bit SWAP = 1*/ ctrl_outw(0x0b00, MRSHPC_MW0CR2); @@ -118,7 +128,7 @@ static int __init cf_init_se(void) ctrl_outw(0x0300, MRSHPC_MW0CR2); /* attribute window open */ - ctrl_outw(0x8a85, MRSHPC_MW1CR1);/* window 0xb8500000 */ + ctrl_outw(0x8a85, MRSHPC_MW1CR1); if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) /* attribute mode & bus width 16bit SWAP = 1*/ ctrl_outw(0x0a00, MRSHPC_MW1CR2); @@ -127,7 +137,7 @@ static int __init cf_init_se(void) ctrl_outw(0x0200, MRSHPC_MW1CR2); /* I/O window open */ - ctrl_outw(0x8a86, MRSHPC_IOWCR1);/* I/O window 0xb8600000 */ + ctrl_outw(0x8a86, MRSHPC_IOWCR1); ctrl_outw(0x0008, MRSHPC_CDCR); /* I/O card mode */ if ((ctrl_inw(MRSHPC_CSR) & 0x4000) != 0) ctrl_outw(0x0a00, MRSHPC_IOWCR2); /* bus width 16bit SWAP = 1*/ @@ -143,10 +153,10 @@ static int __init cf_init_se(void) int __init cf_init(void) { -#if defined(CONFIG_SH_SOLUTION_ENGINE) - if (MACH_SE) + if( mach_is_se() || mach_is_7722se() ){ return cf_init_se(); -#endif + } + return cf_init_default(); } diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index abb586b1..014f318 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -1,7 +1,7 @@ /* * arch/sh/kernel/cpu/clock.c - SuperH clock framework * - * Copyright (C) 2005, 2006 Paul Mundt + * Copyright (C) 2005, 2006, 2007 Paul Mundt * * This clock framework is derived from the OMAP version by: * @@ -23,6 +23,7 @@ #include <linux/seq_file.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/proc_fs.h> #include <asm/clock.h> #include <asm/timer.h> @@ -98,15 +99,17 @@ int __clk_enable(struct clk *clk) if (clk->ops && clk->ops->init) clk->ops->init(clk); + kref_get(&clk->kref); + if (clk->flags & CLK_ALWAYS_ENABLED) return 0; if (likely(clk->ops && clk->ops->enable)) clk->ops->enable(clk); - kref_get(&clk->kref); return 0; } +EXPORT_SYMBOL_GPL(__clk_enable); int clk_enable(struct clk *clk) { @@ -119,6 +122,7 @@ int clk_enable(struct clk *clk) return ret; } +EXPORT_SYMBOL_GPL(clk_enable); static void clk_kref_release(struct kref *kref) { @@ -127,11 +131,17 @@ static void clk_kref_release(struct kref *kref) void __clk_disable(struct clk *clk) { + int count = kref_put(&clk->kref, clk_kref_release); + if (clk->flags & CLK_ALWAYS_ENABLED) return; - kref_put(&clk->kref, clk_kref_release); + if (!count) { /* count reaches zero, disable the clock */ + if (likely(clk->ops && clk->ops->disable)) + clk->ops->disable(clk); + } } +EXPORT_SYMBOL_GPL(__clk_disable); void clk_disable(struct clk *clk) { @@ -141,6 +151,7 @@ void clk_disable(struct clk *clk) __clk_disable(clk); spin_unlock_irqrestore(&clock_lock, flags); } +EXPORT_SYMBOL_GPL(clk_disable); int clk_register(struct clk *clk) { @@ -151,8 +162,18 @@ int clk_register(struct clk *clk) mutex_unlock(&clock_list_sem); + if (clk->flags & CLK_ALWAYS_ENABLED) { + pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name); + if (clk->ops && clk->ops->init) + clk->ops->init(clk); + if (clk->ops && clk->ops->enable) + clk->ops->enable(clk); + pr_debug( "Enabled."); + } + return 0; } +EXPORT_SYMBOL_GPL(clk_register); void clk_unregister(struct clk *clk) { @@ -160,21 +181,29 @@ void clk_unregister(struct clk *clk) list_del(&clk->node); mutex_unlock(&clock_list_sem); } +EXPORT_SYMBOL_GPL(clk_unregister); -inline unsigned long clk_get_rate(struct clk *clk) +unsigned long clk_get_rate(struct clk *clk) { return clk->rate; } +EXPORT_SYMBOL_GPL(clk_get_rate); int clk_set_rate(struct clk *clk, unsigned long rate) { + return clk_set_rate_ex(clk, rate, 0); +} +EXPORT_SYMBOL_GPL(clk_set_rate); + +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id) +{ int ret = -EOPNOTSUPP; if (likely(clk->ops && clk->ops->set_rate)) { unsigned long flags; spin_lock_irqsave(&clock_lock, flags); - ret = clk->ops->set_rate(clk, rate); + ret = clk->ops->set_rate(clk, rate, algo_id); spin_unlock_irqrestore(&clock_lock, flags); } @@ -183,6 +212,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) return ret; } +EXPORT_SYMBOL_GPL(clk_set_rate_ex); void clk_recalc_rate(struct clk *clk) { @@ -197,6 +227,7 @@ void clk_recalc_rate(struct clk *clk) if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) propagate_rate(clk); } +EXPORT_SYMBOL_GPL(clk_recalc_rate); /* * Returns a clock. Note that we first try to use device id on the bus @@ -233,18 +264,43 @@ found: return clk; } +EXPORT_SYMBOL_GPL(clk_get); void clk_put(struct clk *clk) { if (clk && !IS_ERR(clk)) module_put(clk->owner); } +EXPORT_SYMBOL_GPL(clk_put); void __init __attribute__ ((weak)) arch_init_clk_ops(struct clk_ops **ops, int type) { } +static int show_clocks(char *buf, char **start, off_t off, + int len, int *eof, void *data) +{ + struct clk *clk; + char *p = buf; + + list_for_each_entry_reverse(clk, &clock_list, node) { + unsigned long rate = clk_get_rate(clk); + + /* + * Don't bother listing dummy clocks with no ancestry + * that only support enable and disable ops. + */ + if (unlikely(!rate && !clk->parent)) + continue; + + p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name, + rate / 1000000, (rate % 1000000) / 10000); + } + + return p - buf; +} + int __init clk_init(void) { int i, ret = 0; @@ -256,7 +312,6 @@ int __init clk_init(void) arch_init_clk_ops(&clk->ops, i); ret |= clk_register(clk); - clk_enable(clk); } /* Kick the child clocks.. */ @@ -266,35 +321,14 @@ int __init clk_init(void) return ret; } -int show_clocks(struct seq_file *m) +static int __init clk_proc_init(void) { - struct clk *clk; - - list_for_each_entry_reverse(clk, &clock_list, node) { - unsigned long rate = clk_get_rate(clk); - - /* - * Don't bother listing dummy clocks with no ancestry - * that only support enable and disable ops. - */ - if (unlikely(!rate && !clk->parent)) - continue; - - seq_printf(m, "%-12s\t: %ld.%02ldMHz\n", clk->name, - rate / 1000000, (rate % 1000000) / 10000); - } + struct proc_dir_entry *p; + p = create_proc_read_entry("clocks", S_IRUSR, NULL, + show_clocks, NULL); + if (unlikely(!p)) + return -EINVAL; return 0; } - -EXPORT_SYMBOL_GPL(clk_register); -EXPORT_SYMBOL_GPL(clk_unregister); -EXPORT_SYMBOL_GPL(clk_get); -EXPORT_SYMBOL_GPL(clk_put); -EXPORT_SYMBOL_GPL(clk_enable); -EXPORT_SYMBOL_GPL(clk_disable); -EXPORT_SYMBOL_GPL(__clk_enable); -EXPORT_SYMBOL_GPL(__clk_disable); -EXPORT_SYMBOL_GPL(clk_get_rate); -EXPORT_SYMBOL_GPL(clk_set_rate); -EXPORT_SYMBOL_GPL(clk_recalc_rate); +subsys_initcall(clk_proc_init); diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index 726acfc..6451ad6 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -41,6 +41,23 @@ __setup("no" __stringify(x), x##_setup); onchip_setup(fpu); onchip_setup(dsp); +#ifdef CONFIG_SPECULATIVE_EXECUTION +#define CPUOPM 0xff2f0000 +#define CPUOPM_RABD (1 << 5) + +static void __init speculative_execution_init(void) +{ + /* Clear RABD */ + ctrl_outl(ctrl_inl(CPUOPM) & ~CPUOPM_RABD, CPUOPM); + + /* Flush the update */ + (void)ctrl_inl(CPUOPM); + ctrl_barrier(); +} +#else +#define speculative_execution_init() do { } while (0) +#endif + /* * Generic first-level cache init */ @@ -261,4 +278,6 @@ asmlinkage void __init sh_cpu_init(void) */ ubc_wakeup(); #endif + + speculative_execution_init(); } diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 0049d21..1c23308 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -4,6 +4,6 @@ obj-y += imask.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o -obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o +obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index 74defe7..d8e22f4 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -18,7 +18,8 @@ #define INTC2_BASE 0xfe080000 #define INTC2_INTMSK (INTC2_BASE + 0x40) #define INTC2_INTMSKCLR (INTC2_BASE + 0x60) -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) #define INTC2_BASE 0xffd40000 #define INTC2_INTMSK (INTC2_BASE + 0x38) #define INTC2_INTMSKCLR (INTC2_BASE + 0x3c) diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c index f600077..6760268 100644 --- a/arch/sh/kernel/cpu/irq/pint.c +++ b/arch/sh/kernel/cpu/irq/pint.c @@ -18,6 +18,58 @@ #include <asm/io.h> #include <asm/machvec.h> +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define INTC_INTER 0xA4000014UL +#define INTC_IPRD 0xA4000018UL +#define INTC_ICR2 0xA4000012UL + +/* PFC */ +#define PORT_PACR 0xA4000100UL +#define PORT_PBCR 0xA4000102UL +#define PORT_PCCR 0xA4000104UL +#define PORT_PDCR 0xA4000106UL +#define PORT_PECR 0xA4000108UL +#define PORT_PFCR 0xA400010AUL +#define PORT_PGCR 0xA400010CUL +#define PORT_PHCR 0xA400010EUL +#define PORT_PJCR 0xA4000110UL +#define PORT_PKCR 0xA4000112UL +#define PORT_PLCR 0xA4000114UL +#define PORT_PMCR 0xA4000118UL +#define PORT_PNCR 0xA400011AUL +#define PORT_PECR2 0xA4050148UL +#define PORT_PFCR2 0xA405014AUL +#define PORT_PNCR2 0xA405015AUL + +/* I/O port */ +#define PORT_PADR 0xA4000120UL +#define PORT_PBDR 0xA4000122UL +#define PORT_PCDR 0xA4000124UL +#define PORT_PDDR 0xA4000126UL +#define PORT_PEDR 0xA4000128UL +#define PORT_PFDR 0xA400012AUL +#define PORT_PGDR 0xA400012CUL +#define PORT_PHDR 0xA400012EUL +#define PORT_PJDR 0xA4000130UL +#define PORT_PKDR 0xA4000132UL +#define PORT_PLDR 0xA4000134UL +#define PORT_PMDR 0xA4000138UL +#define PORT_PNDR 0xA400013AUL + +#define PINT0_IRQ 40 +#define PINT8_IRQ 41 +#define PINT_IRQ_BASE 86 + +#define PINT0_IPR_ADDR INTC_IPRD +#define PINT0_IPR_POS 3 +#define PINT0_PRIORITY 2 + +#define PINT8_IPR_ADDR INTC_IPRD +#define PINT8_IPR_POS 2 +#define PINT8_PRIORITY 2 + +#endif /* CONFIG_CPU_SUBTYPE_SH7705 */ + static unsigned char pint_map[256]; static unsigned long portcr_mask; @@ -126,7 +178,7 @@ int ipr_irq_demux(int irq) unsigned long creg, dreg, d, sav; if (irq == PINT0_IRQ) { -#if defined(CONFIG_CPU_SUBTYPE_SH7707) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707) creg = PORT_PACR; dreg = PORT_PADR; #else @@ -144,7 +196,7 @@ int ipr_irq_demux(int irq) return PINT_IRQ_BASE + pint_map[d]; } else if (irq == PINT8_IRQ) { -#if defined(CONFIG_CPU_SUBTYPE_SH7707) +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || defined(CONFIG_CPU_SUBTYPE_SH7707) creg = PORT_PBCR; dreg = PORT_PBDR; #else diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 83905e4..09faa05 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index 821b0ab..647623b 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -78,6 +78,9 @@ int __init detect_cpu_and_cache_system(void) #if defined(CONFIG_CPU_SUBTYPE_SH7710) current_cpu_data.type = CPU_SH7710; #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7712) + current_cpu_data.type = CPU_SH7712; +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) current_cpu_data.type = CPU_SH7705; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index a8e41c5..1983fb7 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -2,6 +2,7 @@ * SH7705 Setup * * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -14,15 +15,15 @@ static struct plat_sci_port sci_platform_data[] = { { - .mapbase = 0xa4400000, + .mapbase = 0xa4410000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 52, 53, 55, 54 }, + .irqs = { 56, 57, 59 }, }, { - .mapbase = 0xa4410000, + .mapbase = 0xa4400000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, - .irqs = { 56, 57, 59, 58 }, + .irqs = { 52, 53, 55 }, }, { .flags = 0, } @@ -46,3 +47,48 @@ static int __init sh7705_devices_setup(void) ARRAY_SIZE(sh7705_devices)); } __initcall(sh7705_devices_setup); + +static struct ipr_data sh7705_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 8, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ + { 21, 0, 0, 2 }, /* RTC PRI (period) */ + { 22, 0, 0, 2 }, /* RTC CUI (carry) */ + { 48, 4, 12, 7 }, /* DMAC DMTE0 */ + { 49, 4, 12, 7 }, /* DMAC DMTE1 */ + { 50, 4, 12, 7 }, /* DMAC DMTE2 */ + { 51, 4, 12, 7 }, /* DMAC DMTE3 */ + { 52, 4, 8, 3 }, /* SCIF0 ERI */ + { 53, 4, 8, 3 }, /* SCIF0 RXI */ + { 55, 4, 8, 3 }, /* SCIF0 TXI */ + { 56, 4, 4, 3 }, /* SCIF1 ERI */ + { 57, 4, 4, 3 }, /* SCIF1 RXI */ + { 59, 4, 4, 3 }, /* SCIF1 TXI */ +}; + +static unsigned long ipr_offsets[] = { + 0xFFFFFEE2 /* 0: IPRA */ +, 0xFFFFFEE4 /* 1: IPRB */ +, 0xA4000016 /* 2: IPRC */ +, 0xA4000018 /* 3: IPRD */ +, 0xA400001A /* 4: IPRE */ +, 0xA4080000 /* 5: IPRF */ +, 0xA4080002 /* 6: IPRG */ +, 0xA4080004 /* 7: IPRH */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7705_ipr_map, ARRAY_SIZE(sh7705_ipr_map)); +} diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7709.c b/arch/sh/kernel/cpu/sh3/setup-sh7709.c index dc9b211..c7d7c35 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7709.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7709.c @@ -48,24 +48,33 @@ static struct platform_device *sh7709_devices[] __initdata = { static int __init sh7709_devices_setup(void) { return platform_add_devices(sh7709_devices, - ARRAY_SIZE(sh7709_devices)); + ARRAY_SIZE(sh7709_devices)); } __initcall(sh7709_devices_setup); -#define IPRx(A,N) .addr=A, .shift=0*N*-1 +#define IPRx(A,N) .addr=A, .shift=N #define IPRA(N) IPRx(0xfffffee2UL,N) #define IPRB(N) IPRx(0xfffffee4UL,N) +#define IPRC(N) IPRx(0xa4000016UL,N) +#define IPRD(N) IPRx(0xa4000018UL,N) #define IPRE(N) IPRx(0xa400001aUL,N) static struct ipr_data sh7709_ipr_map[] = { - [16] = { IPRA(15-12), 2 }, /* TMU TUNI0 */ - [17] = { IPRA(11-8), 4 }, /* TMU TUNI1 */ - [22] = { IPRA(3-0), 2 }, /* RTC CUI */ - [23 ... 26] = { IPRB(7-4), 3 }, /* SCI */ - [27] = { IPRB(15-12), 2 }, /* WDT ITI */ - [48 ... 51] = { IPRE(15-12), 7 }, /* DMA */ - [52 ... 55] = { IPRE(11-8), 3 }, /* IRDA */ - [56 ... 59] = { IPRE(7-4), 3 }, /* SCIF */ + [16] = { IPRA(12), 2 }, /* TMU TUNI0 */ + [17] = { IPRA(8), 4 }, /* TMU TUNI1 */ + [18 ... 19] = { IPRA(4), 1 }, /* TMU TUNI1 */ + [20 ... 22] = { IPRA(0), 2 }, /* RTC CUI */ + [23 ... 26] = { IPRB(4), 3 }, /* SCI */ + [27] = { IPRB(12), 2 }, /* WDT ITI */ + [32] = { IPRC(0), 1 }, /* IRQ 0 */ + [33] = { IPRC(4), 1 }, /* IRQ 1 */ + [34] = { IPRC(8), 1 }, /* IRQ 2 APM */ + [35] = { IPRC(12), 1 }, /* IRQ 3 TOUCHSCREEN */ + [36] = { IPRD(0), 1 }, /* IRQ 4 */ + [37] = { IPRD(4), 1 }, /* IRQ 5 */ + [48 ... 51] = { IPRE(12), 7 }, /* DMA */ + [52 ... 55] = { IPRE(8), 3 }, /* IRDA */ + [56 ... 59] = { IPRE(4), 3 }, /* SCIF */ }; void __init init_IRQ_ipr() diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 895f99e..51760a7 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -2,6 +2,7 @@ * SH7710 Setup * * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -19,6 +20,12 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 52, 53, 55, 54 }, }, { + .mapbase = 0xa4420000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 56, 57, 59, 58 }, + }, { + .flags = 0, } }; @@ -41,3 +48,56 @@ static int __init sh7710_devices_setup(void) ARRAY_SIZE(sh7710_devices)); } __initcall(sh7710_devices_setup); + +static struct ipr_data sh7710_ipr_map[] = { + /* IRQ, IPR-idx, shift, priority */ + { 16, 0, 12, 2 }, /* TMU0 TUNI*/ + { 17, 0, 8, 2 }, /* TMU1 TUNI */ + { 18, 0, 4, 2 }, /* TMU2 TUNI */ + { 27, 1, 12, 2 }, /* WDT ITI */ + { 20, 0, 0, 2 }, /* RTC ATI (alarm) */ + { 21, 0, 0, 2 }, /* RTC PRI (period) */ + { 22, 0, 0, 2 }, /* RTC CUI (carry) */ + { 48, 4, 12, 7 }, /* DMAC DMTE0 */ + { 49, 4, 12, 7 }, /* DMAC DMTE1 */ + { 50, 4, 12, 7 }, /* DMAC DMTE2 */ + { 51, 4, 12, 7 }, /* DMAC DMTE3 */ + { 52, 4, 8, 3 }, /* SCIF0 ERI */ + { 53, 4, 8, 3 }, /* SCIF0 RXI */ + { 54, 4, 8, 3 }, /* SCIF0 BRI */ + { 55, 4, 8, 3 }, /* SCIF0 TXI */ + { 56, 4, 4, 3 }, /* SCIF1 ERI */ + { 57, 4, 4, 3 }, /* SCIF1 RXI */ + { 58, 4, 4, 3 }, /* SCIF1 BRI */ + { 59, 4, 4, 3 }, /* SCIF1 TXI */ + { 76, 5, 8, 7 }, /* DMAC DMTE4 */ + { 77, 5, 8, 7 }, /* DMAC DMTE5 */ + { 80, 6, 12, 5 }, /* EDMAC EINT0 */ + { 81, 6, 8, 5 }, /* EDMAC EINT1 */ + { 82, 6, 4, 5 }, /* EDMAC EINT2 */ +}; + +static unsigned long ipr_offsets[] = { + 0xA414FEE2 /* 0: IPRA */ +, 0xA414FEE4 /* 1: IPRB */ +, 0xA4140016 /* 2: IPRC */ +, 0xA4140018 /* 3: IPRD */ +, 0xA414001A /* 4: IPRE */ +, 0xA4080000 /* 5: IPRF */ +, 0xA4080002 /* 6: IPRG */ +, 0xA4080004 /* 7: IPRH */ +, 0xA4080006 /* 8: IPRI */ +}; + +/* given the IPR index return the address of the IPR register */ +unsigned int map_ipridx_to_addr(int idx) +{ + if (idx >= ARRAY_SIZE(ipr_offsets)) + return 0; + return ipr_offsets[idx]; +} + +void __init init_IRQ_ipr() +{ + make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map)); +} diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index fa2019a..fcb2c41b 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -82,7 +82,8 @@ static void shoc_clk_init(struct clk *clk) for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) { int divisor = frqcr3_divisors[i]; - if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0) + if (clk->ops->set_rate(clk, clk->parent->rate / + divisor, 0) == 0) break; } diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index 58950de..8cd0490 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -124,6 +124,14 @@ int __init detect_cpu_and_cache_system(void) current_cpu_data.dcache.ways = 4; current_cpu_data.flags |= CPU_HAS_LLSC; break; + case 0x3004: + case 0x3007: + current_cpu_data.type = CPU_SH7785; + current_cpu_data.icache.ways = 4; + current_cpu_data.dcache.ways = 4; + current_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER | + CPU_HAS_LLSC; + break; case 0x3008: if (prr == 0xa0) { current_cpu_data.type = CPU_SH7722; diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index a8f493f..ab7422f 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -5,6 +5,7 @@ # CPU subtype setup obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o +obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH73180) += setup-sh73180.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o @@ -13,7 +14,8 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o +clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o -clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7343.o +clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c new file mode 100644 index 0000000..2909003 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -0,0 +1,600 @@ +/* + * arch/sh/kernel/cpu/sh4a/clock-sh7722.c + * + * SH7722 support for the clock framework + * + * Copyright (c) 2006-2007 Nomad Global Solutions Inc + * Based on code for sh7343 by Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <asm/clock.h> +#include <asm/freq.h> + +#define SH7722_PLL_FREQ (32000000/8) +#define N (-1) +#define NM (-2) +#define ROUND_NEAREST 0 +#define ROUND_DOWN -1 +#define ROUND_UP +1 + +static int adjust_algos[][3] = { + {}, /* NO_CHANGE */ + { NM, N, 1 }, /* N:1, N:1 */ + { 3, 2, 2 }, /* 3:2:2 */ + { 5, 2, 2 }, /* 5:2:2 */ + { N, 1, 1 }, /* N:1:1 */ + + { N, 1 }, /* N:1 */ + + { N, 1 }, /* N:1 */ + { 3, 2 }, + { 4, 3 }, + { 5, 4 }, + + { N, 1 } +}; + +static unsigned long adjust_pair_of_clocks(unsigned long r1, unsigned long r2, + int m1, int m2, int round_flag) +{ + unsigned long rem, div; + int the_one = 0; + + pr_debug( "Actual values: r1 = %ld\n", r1); + pr_debug( "...............r2 = %ld\n", r2); + + if (m1 == m2) { + r2 = r1; + pr_debug( "setting equal rates: r2 now %ld\n", r2); + } else if ((m2 == N && m1 == 1) || + (m2 == NM && m1 == N)) { /* N:1 or NM:N */ + pr_debug( "Setting rates as 1:N (N:N*M)\n"); + rem = r2 % r1; + pr_debug( "...remainder = %ld\n", rem); + if (rem) { + div = r2 / r1; + pr_debug( "...div = %ld\n", div); + switch (round_flag) { + case ROUND_NEAREST: + the_one = rem >= r1/2 ? 1 : 0; break; + case ROUND_UP: + the_one = 1; break; + case ROUND_DOWN: + the_one = 0; break; + } + + r2 = r1 * (div + the_one); + pr_debug( "...setting r2 to %ld\n", r2); + } + } else if ((m2 == 1 && m1 == N) || + (m2 == N && m1 == NM)) { /* 1:N or N:NM */ + pr_debug( "Setting rates as N:1 (N*M:N)\n"); + rem = r1 % r2; + pr_debug( "...remainder = %ld\n", rem); + if (rem) { + div = r1 / r2; + pr_debug( "...div = %ld\n", div); + switch (round_flag) { + case ROUND_NEAREST: + the_one = rem > r2/2 ? 1 : 0; break; + case ROUND_UP: + the_one = 0; break; + case ROUND_DOWN: + the_one = 1; break; + } + + r2 = r1 / (div + the_one); + pr_debug( "...setting r2 to %ld\n", r2); + } + } else { /* value:value */ + pr_debug( "Setting rates as %d:%d\n", m1, m2); + div = r1 / m1; + r2 = div * m2; + pr_debug( "...div = %ld\n", div); + pr_debug( "...setting r2 to %ld\n", r2); + } + + return r2; +} + +static void adjust_clocks(int originate, int *l, unsigned long v[], + int n_in_line) +{ + int x; + + pr_debug( "Go down from %d...\n", originate); + /* go up recalculation clocks */ + for (x = originate; x>0; x -- ) + v[x-1] = adjust_pair_of_clocks(v[x], v[x-1], + l[x], l[x-1], + ROUND_UP); + + pr_debug( "Go up from %d...\n", originate); + /* go down recalculation clocks */ + for (x = originate; x<n_in_line - 1; x ++ ) + v[x+1] = adjust_pair_of_clocks(v[x], v[x+1], + l[x], l[x+1], + ROUND_UP); +} + + +/* + * SH7722 uses a common set of multipliers and divisors, so this + * is quite simple.. + */ + +/* + * Instead of having two separate multipliers/divisors set, like this: + * + * static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; + * static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 }; + * + * I created the divisors2 array, which is used to calculate rate like + * rate = parent * 2 / divisors2[ divisor ]; +*/ +static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 }; + +static void master_clk_init(struct clk *clk) +{ + clk_set_rate(clk, clk_get_rate(clk)); +} + +static void master_clk_recalc(struct clk *clk) +{ + unsigned long frqcr = ctrl_inl(FRQCR); + + clk->rate = CONFIG_SH_PCLK_FREQ * (1 + (frqcr >> 24 & 0xF)); +} + +static int master_clk_setrate(struct clk *clk, unsigned long rate, int id) +{ + int div = rate / SH7722_PLL_FREQ; + int master_divs[] = { 2, 3, 4, 6, 8, 16 }; + int index; + unsigned long frqcr; + + if (rate < SH7722_PLL_FREQ * 2) + return -EINVAL; + + for (index = 1; index < ARRAY_SIZE(master_divs); index++) + if (div >= master_divs[index - 1] && div < master_divs[index]) + break; + + if (index >= ARRAY_SIZE(master_divs)) + index = ARRAY_SIZE(master_divs); + div = master_divs[index - 1]; + + frqcr = ctrl_inl(FRQCR); + frqcr &= ~(0xF << 24); + frqcr |= ( (div-1) << 24); + ctrl_outl(frqcr, FRQCR); + + return 0; +} + +static struct clk_ops sh7722_master_clk_ops = { + .init = master_clk_init, + .recalc = master_clk_recalc, + .set_rate = master_clk_setrate, +}; + +struct frqcr_context { + unsigned mask; + unsigned shift; +}; + +struct frqcr_context sh7722_get_clk_context(const char *name) +{ + struct frqcr_context ctx = { 0, }; + + if (!strcmp(name, "peripheral_clk")) { + ctx.shift = 0; + ctx.mask = 0xF; + } else if (!strcmp(name, "sdram_clk")) { + ctx.shift = 4; + ctx.mask = 0xF; + } else if (!strcmp(name, "bus_clk")) { + ctx.shift = 8; + ctx.mask = 0xF; + } else if (!strcmp(name, "sh_clk")) { + ctx.shift = 12; + ctx.mask = 0xF; + } else if (!strcmp(name, "umem_clk")) { + ctx.shift = 16; + ctx.mask = 0xF; + } else if (!strcmp(name, "cpu_clk")) { + ctx.shift = 20; + ctx.mask = 7; + } + return ctx; +} + +/** + * sh7722_find_divisors - find divisor for setting rate + * + * All sh7722 clocks use the same set of multipliers/divisors. This function + * chooses correct divisor to set the rate of clock with parent clock that + * generates frequency of 'parent_rate' + * + * @parent_rate: rate of parent clock + * @rate: requested rate to be set + */ +static int sh7722_find_divisors(unsigned long parent_rate, unsigned rate) +{ + unsigned div2 = parent_rate * 2 / rate; + int index; + + if (rate > parent_rate) + return -EINVAL; + + for (index = 1; index < ARRAY_SIZE(divisors2); index++) { + if (div2 > divisors2[index] && div2 <= divisors2[index]) + break; + } + if (index >= ARRAY_SIZE(divisors2)) + index = ARRAY_SIZE(divisors2) - 1; + return divisors2[index]; +} + +static void sh7722_frqcr_recalc(struct clk *clk) +{ + struct frqcr_context ctx = sh7722_get_clk_context(clk->name); + unsigned long frqcr = ctrl_inl(FRQCR); + int index; + + index = (frqcr >> ctx.shift) & ctx.mask; + clk->rate = clk->parent->rate * 2 / divisors2[index]; +} + +static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate, + int algo_id) +{ + struct frqcr_context ctx = sh7722_get_clk_context(clk->name); + unsigned long parent_rate = clk->parent->rate; + int div; + unsigned long frqcr; + int err = 0; + + /* pretty invalid */ + if (parent_rate < rate) + return -EINVAL; + + /* look for multiplier/divisor pair */ + div = sh7722_find_divisors(parent_rate, rate); + if (div<0) + return div; + + /* calculate new value of clock rate */ + clk->rate = parent_rate * 2 / div; + frqcr = ctrl_inl(FRQCR); + + /* FIXME: adjust as algo_id specifies */ + if (algo_id != NO_CHANGE) { + int originator; + char *algo_group_1[] = { "cpu_clk", "umem_clk", "sh_clk" }; + char *algo_group_2[] = { "sh_clk", "bus_clk" }; + char *algo_group_3[] = { "sh_clk", "sdram_clk" }; + char *algo_group_4[] = { "bus_clk", "peripheral_clk" }; + char *algo_group_5[] = { "cpu_clk", "peripheral_clk" }; + char **algo_current = NULL; + /* 3 is the maximum number of clocks in relation */ + struct clk *ck[3]; + unsigned long values[3]; /* the same comment as above */ + int part_length = -1; + int i; + + /* + * all the steps below only required if adjustion was + * requested + */ + if (algo_id == IUS_N1_N1 || + algo_id == IUS_322 || + algo_id == IUS_522 || + algo_id == IUS_N11) { + algo_current = algo_group_1; + part_length = 3; + } + if (algo_id == SB_N1) { + algo_current = algo_group_2; + part_length = 2; + } + if (algo_id == SB3_N1 || + algo_id == SB3_32 || + algo_id == SB3_43 || + algo_id == SB3_54) { + algo_current = algo_group_3; + part_length = 2; + } + if (algo_id == BP_N1) { + algo_current = algo_group_4; + part_length = 2; + } + if (algo_id == IP_N1) { + algo_current = algo_group_5; + part_length = 2; + } + if (!algo_current) + goto incorrect_algo_id; + + originator = -1; + for (i = 0; i < part_length; i ++ ) { + if (originator >= 0 && !strcmp(clk->name, + algo_current[i])) + originator = i; + ck[i] = clk_get(NULL, algo_current[i]); + values[i] = clk_get_rate(ck[i]); + } + + if (originator >= 0) + adjust_clocks(originator, adjust_algos[algo_id], + values, part_length); + + for (i = 0; i < part_length; i ++ ) { + struct frqcr_context part_ctx; + int part_div; + + if (likely(!err)) { + part_div = sh7722_find_divisors(parent_rate, + rate); + if (part_div > 0) { + part_ctx = sh7722_get_clk_context( + ck[i]->name); + frqcr &= ~(part_ctx.mask << + part_ctx.shift); + frqcr |= part_div << part_ctx.shift; + } else + err = part_div; + } + + ck[i]->ops->recalc(ck[i]); + clk_put(ck[i]); + } + } + + /* was there any error during recalculation ? If so, bail out.. */ + if (unlikely(err!=0)) + goto out_err; + + /* clear FRQCR bits */ + frqcr &= ~(ctx.mask << ctx.shift); + frqcr |= div << ctx.shift; + + /* ...and perform actual change */ + ctrl_outl(frqcr, FRQCR); + return 0; + +incorrect_algo_id: + return -EINVAL; +out_err: + return err; +} + +static struct clk_ops sh7722_frqcr_clk_ops = { + .recalc = sh7722_frqcr_recalc, + .set_rate = sh7722_frqcr_set_rate, +}; + +/* + * clock ops methods for SIU A/B and IrDA clock + * + */ +static int sh7722_siu_which(struct clk *clk) +{ + if (!strcmp(clk->name, "siu_a_clk")) + return 0; + if (!strcmp(clk->name, "siu_b_clk")) + return 1; + if (!strcmp(clk->name, "irda_clk")) + return 2; + return -EINVAL; +} + +static unsigned long sh7722_siu_regs[] = { + [0] = SCLKACR, + [1] = SCLKBCR, + [2] = IrDACLKCR, +}; + +static int sh7722_siu_start_stop(struct clk *clk, int enable) +{ + int siu = sh7722_siu_which(clk); + unsigned long r; + + if (siu < 0) + return siu; + BUG_ON(siu > 2); + r = ctrl_inl(sh7722_siu_regs[siu]); + if (enable) + ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]); + else + ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]); + return 0; +} + +static void sh7722_siu_enable(struct clk *clk) +{ + sh7722_siu_start_stop(clk, 1); +} + +static void sh7722_siu_disable(struct clk *clk) +{ + sh7722_siu_start_stop(clk, 0); +} + +static void sh7722_video_enable(struct clk *clk) +{ + unsigned long r; + + r = ctrl_inl(VCLKCR); + ctrl_outl( r & ~(1<<8), VCLKCR); +} + +static void sh7722_video_disable(struct clk *clk) +{ + unsigned long r; + + r = ctrl_inl(VCLKCR); + ctrl_outl( r | (1<<8), VCLKCR); +} + +static int sh7722_video_set_rate(struct clk *clk, unsigned long rate, + int algo_id) +{ + unsigned long r; + + r = ctrl_inl(VCLKCR); + r &= ~0x3F; + r |= ((clk->parent->rate / rate - 1) & 0x3F); + ctrl_outl(r, VCLKCR); + return 0; +} + +static void sh7722_video_recalc(struct clk *clk) +{ + unsigned long r; + + r = ctrl_inl(VCLKCR); + clk->rate = clk->parent->rate / ((r & 0x3F) + 1); +} + +static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) +{ + int siu = sh7722_siu_which(clk); + unsigned long r; + int div; + + if (siu < 0) + return siu; + BUG_ON(siu > 2); + r = ctrl_inl(sh7722_siu_regs[siu]); + div = sh7722_find_divisors(clk->parent->rate, rate); + if (div < 0) + return div; + r = (r & ~0xF) | div; + ctrl_outl(r, sh7722_siu_regs[siu]); + return 0; +} + +static void sh7722_siu_recalc(struct clk *clk) +{ + int siu = sh7722_siu_which(clk); + unsigned long r; + + if (siu < 0) + return /* siu */ ; + BUG_ON(siu > 1); + r = ctrl_inl(sh7722_siu_regs[siu]); + clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; +} + +static struct clk_ops sh7722_siu_clk_ops = { + .recalc = sh7722_siu_recalc, + .set_rate = sh7722_siu_set_rate, + .enable = sh7722_siu_enable, + .disable = sh7722_siu_disable, +}; + +static struct clk_ops sh7722_video_clk_ops = { + .recalc = sh7722_video_recalc, + .set_rate = sh7722_video_set_rate, + .enable = sh7722_video_enable, + .disable = sh7722_video_disable, +}; +/* + * and at last, clock definitions themselves + */ +static struct clk sh7722_umem_clock = { + .name = "umem_clk", + .ops = &sh7722_frqcr_clk_ops, +}; + +static struct clk sh7722_sh_clock = { + .name = "sh_clk", + .ops = &sh7722_frqcr_clk_ops, +}; + +static struct clk sh7722_peripheral_clock = { + .name = "peripheral_clk", + .ops = &sh7722_frqcr_clk_ops, +}; + +static struct clk sh7722_sdram_clock = { + .name = "sdram_clk", + .ops = &sh7722_frqcr_clk_ops, +}; + +/* + * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops + * methods of clk_ops determine which register they should access by + * examining clk->name field + */ +static struct clk sh7722_siu_a_clock = { + .name = "siu_a_clk", + .ops = &sh7722_siu_clk_ops, +}; + +static struct clk sh7722_siu_b_clock = { + .name = "siu_b_clk", + .ops = &sh7722_siu_clk_ops, +}; + +static struct clk sh7722_irda_clock = { + .name = "irda_clk", + .ops = &sh7722_siu_clk_ops, +}; + +static struct clk sh7722_video_clock = { + .name = "video_clk", + .ops = &sh7722_video_clk_ops, +}; + +static struct clk *sh7722_clocks[] = { + &sh7722_umem_clock, + &sh7722_sh_clock, + &sh7722_peripheral_clock, + &sh7722_sdram_clock, + &sh7722_siu_a_clock, + &sh7722_siu_b_clock, + &sh7722_irda_clock, + &sh7722_video_clock, +}; + +/* + * init in order: master, module, bus, cpu + */ +struct clk_ops *onchip_ops[] = { + &sh7722_master_clk_ops, + &sh7722_frqcr_clk_ops, + &sh7722_frqcr_clk_ops, + &sh7722_frqcr_clk_ops, +}; + +void __init +arch_init_clk_ops(struct clk_ops **ops, int type) +{ + BUG_ON(type < 0 || type > ARRAY_SIZE(onchip_ops)); + *ops = onchip_ops[type]; +} + +int __init sh7722_clock_init(void) +{ + struct clk *master; + int i; + + master = clk_get(NULL, "master_clk"); + for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) { + pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name); + sh7722_clocks[i]->parent = master; + clk_register(sh7722_clocks[i]); + } + clk_put(master); + return 0; +} +arch_initcall(sh7722_clock_init); diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c new file mode 100644 index 0000000..805535a --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -0,0 +1,162 @@ +/* + * arch/sh/kernel/cpu/sh4a/clock-sh7785.c + * + * SH7785 support for the clock framework + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int ifc_divisors[] = { 1, 2, 4, 6 }; +static int ufc_divisors[] = { 1, 1, 4, 6 }; +static int sfc_divisors[] = { 1, 1, 4, 6 }; +static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, + 24, 32, 36, 48, 1, 1, 1, 1 }; +static int mfc_divisors[] = { 1, 1, 4, 6 }; +static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, + 24, 32, 36, 48, 1, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= 36; +} + +static struct clk_ops sh7785_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inl(FRQMR1) & 0x000f); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7785_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7785_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003); + clk->rate = clk->parent->rate / ifc_divisors[idx]; +} + +static struct clk_ops sh7785_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7785_clk_ops[] = { + &sh7785_master_clk_ops, + &sh7785_module_clk_ops, + &sh7785_bus_clk_ops, + &sh7785_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7785_clk_ops)) + *ops = sh7785_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003); + clk->rate = clk->parent->rate / sfc_divisors[idx]; +} + +static struct clk_ops sh7785_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk sh7785_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7785_shyway_clk_ops, +}; + +static void ddr_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003); + clk->rate = clk->parent->rate / mfc_divisors[idx]; +} + +static struct clk_ops sh7785_ddr_clk_ops = { + .recalc = ddr_clk_recalc, +}; + +static struct clk sh7785_ddr_clk = { + .name = "ddr_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7785_ddr_clk_ops, +}; + +static void ram_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQMR1) >> 24) & 0x0003); + clk->rate = clk->parent->rate / ufc_divisors[idx]; +} + +static struct clk_ops sh7785_ram_clk_ops = { + .recalc = ram_clk_recalc, +}; + +static struct clk sh7785_ram_clk = { + .name = "ram_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7785_ram_clk_ops, +}; + +/* + * Additional SH7785-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *sh7785_onchip_clocks[] = { + &sh7785_shyway_clk, + &sh7785_ddr_clk, + &sh7785_ram_clk, +}; + +static int __init sh7785_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh7785_onchip_clocks); i++) { + struct clk *clkp = sh7785_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} +arch_initcall(sh7785_clk_init); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c new file mode 100644 index 0000000..07b0de8 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -0,0 +1,103 @@ +/* + * SH7785 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffea0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffeb0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 44, 45, 47, 46 }, + }, + + /* + * The rest of these all have multiplexed IRQs + */ + { + .mapbase = 0xffec0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 60, 60, 60, 60 }, + }, { + .mapbase = 0xffed0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 61, 61, 61, 61 }, + }, { + .mapbase = 0xffee0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 62, 62, 62, 62 }, + }, { + .mapbase = 0xffef0000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 63, 63, 63, 63 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct platform_device *sh7785_devices[] __initdata = { + &sci_device, +}; + +static int __init sh7785_devices_setup(void) +{ + return platform_add_devices(sh7785_devices, + ARRAY_SIZE(sh7785_devices)); +} +__initcall(sh7785_devices_setup); + +static struct intc2_data intc2_irq_table[] = { + { 28, 0, 24, 0, 0, 2 }, /* TMU0 */ + + { 40, 8, 24, 0, 2, 3 }, /* SCIF0 ERI */ + { 41, 8, 24, 0, 2, 3 }, /* SCIF0 RXI */ + { 42, 8, 24, 0, 2, 3 }, /* SCIF0 BRI */ + { 43, 8, 24, 0, 2, 3 }, /* SCIF0 TXI */ + + { 44, 8, 16, 0, 3, 3 }, /* SCIF1 ERI */ + { 45, 8, 16, 0, 3, 3 }, /* SCIF1 RXI */ + { 46, 8, 16, 0, 3, 3 }, /* SCIF1 BRI */ + { 47, 8, 16, 0, 3, 3 }, /* SCIF1 TXI */ + + { 64, 0x14, 8, 0, 14, 2 }, /* PCIC0 */ + { 65, 0x14, 0, 0, 15, 2 }, /* PCIC1 */ + { 66, 0x18, 24, 0, 16, 2 }, /* PCIC2 */ + { 67, 0x18, 16, 0, 17, 2 }, /* PCIC3 */ + { 68, 0x18, 8, 0, 18, 2 }, /* PCIC4 */ + + { 60, 8, 8, 0, 4, 3 }, /* SCIF2 ERI, RXI, BRI, TXI */ + { 60, 8, 0, 0, 5, 3 }, /* SCIF3 ERI, RXI, BRI, TXI */ + { 60, 12, 24, 0, 6, 3 }, /* SCIF4 ERI, RXI, BRI, TXI */ + { 60, 12, 16, 0, 7, 3 }, /* SCIF5 ERI, RXI, BRI, TXI */ +}; + +void __init init_IRQ_intc2(void) +{ + make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); +} diff --git a/arch/sh/kernel/crash_dump.c b/arch/sh/kernel/crash_dump.c new file mode 100644 index 0000000..4a2ecbe --- /dev/null +++ b/arch/sh/kernel/crash_dump.c @@ -0,0 +1,46 @@ +/* + * crash_dump.c - Memory preserving reboot related code. + * + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * Copyright (C) IBM Corporation, 2004. All rights reserved + */ + +#include <linux/errno.h> +#include <linux/crash_dump.h> +#include <linux/io.h> +#include <asm/uaccess.h> + +/** + * copy_oldmem_page - copy one page from "oldmem" + * @pfn: page frame number to be copied + * @buf: target memory address for the copy; this can be in kernel address + * space or user address space (see @userbuf) + * @csize: number of bytes to copy + * @offset: offset in bytes into the page (based on pfn) to begin the copy + * @userbuf: if set, @buf is in user address space, use copy_to_user(), + * otherwise @buf is in kernel address space, use memcpy(). + * + * Copy a page from "oldmem". For this page, there is no pte mapped + * in the current kernel. We stitch up a pte, similar to kmap_atomic. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); + + if (userbuf) { + if (copy_to_user(buf, (vaddr + offset), csize)) { + iounmap(vaddr); + return -EFAULT; + } + } else + memcpy(buf, (vaddr + offset), csize); + + iounmap(vaddr); + return csize; +} diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 9bdd8a0..27b923c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -13,6 +13,7 @@ #include <linux/seq_file.h> #include <linux/irq.h> #include <asm/processor.h> +#include <asm/machvec.h> #include <asm/uaccess.h> #include <asm/thread_info.h> #include <asm/cpu/mmu_context.h> @@ -44,7 +45,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); } - if (i < NR_IRQS) { + if (i < sh_mv.mv_nr_irqs) { spin_lock_irqsave(&irq_desc[i].lock, flags); action = irq_desc[i].action; if (!action) @@ -61,7 +62,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); unlock: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) + } else if (i == sh_mv.mv_nr_irqs) seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); return 0; diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index d8927d8..a532336 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -6,11 +6,11 @@ * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>, * Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>, * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>. - * + * * This version by Henry Bell <henry.bell@st.com> * Minor modifications by Jeremy Siegel <jsiegel@mvista.com> - * - * Contains low-level support for remote debug using GDB. + * + * Contains low-level support for remote debug using GDB. * * To enable debugger support, two things need to happen. A call to * set_debug_traps() is necessary in order to allow any breakpoints @@ -48,7 +48,7 @@ * k kill (Detach GDB) * * d Toggle debug flag - * D Detach GDB + * D Detach GDB * * Hct Set thread t for operations, OK or ENN * c = 'c' (step, cont), c = 'g' (other @@ -58,7 +58,7 @@ * qfThreadInfo Get list of current threads (first) m<id> * qsThreadInfo " " " " " (subsequent) * qOffsets Get section offsets Text=x;Data=y;Bss=z - * + * * TXX Find if thread XX is alive OK or ENN * ? What was the last sigval ? SNN (signal NN) * O Output to GDB console @@ -74,7 +74,7 @@ * '$' or '#'. If <data> starts with two characters followed by * ':', then the existing stubs interpret this as a sequence number. * - * CSUM1 and CSUM2 are ascii hex representation of an 8-bit + * CSUM1 and CSUM2 are ascii hex representation of an 8-bit * checksum of <data>, the most significant nibble is sent first. * the hex digits 0-9,a-f are used. * @@ -86,8 +86,8 @@ * Responses can be run-length encoded to save space. A '*' means that * the next character is an ASCII encoding giving a repeat count which * stands for that many repititions of the character preceding the '*'. - * The encoding is n+29, yielding a printable character where n >=3 - * (which is where RLE starts to win). Don't use an n > 126. + * The encoding is n+29, yielding a printable character where n >=3 + * (which is where RLE starts to win). Don't use an n > 126. * * So "0* " means the same as "0000". */ @@ -100,12 +100,10 @@ #include <linux/delay.h> #include <linux/linkage.h> #include <linux/init.h> - -#ifdef CONFIG_SH_KGDB_CONSOLE #include <linux/console.h> -#endif - +#include <linux/sysrq.h> #include <asm/system.h> +#include <asm/cacheflush.h> #include <asm/current.h> #include <asm/signal.h> #include <asm/pgtable.h> @@ -153,7 +151,6 @@ char kgdb_in_gdb_mode; char in_nmi; /* Set during NMI to prevent reentry */ int kgdb_nofault; /* Boolean to ignore bus errs (i.e. in GDB) */ int kgdb_enabled = 1; /* Default to enabled, cmdline can disable */ -int kgdb_halt; /* Exposed for user access */ struct task_struct *kgdb_current; @@ -246,14 +243,6 @@ static char out_buffer[OUTBUFMAX]; static void kgdb_to_gdb(const char *s); -#ifdef CONFIG_KGDB_THREAD -static struct task_struct *trapped_thread; -static struct task_struct *current_thread; -typedef unsigned char threadref[8]; -#define BUF_THREAD_ID_SIZE 16 -#endif - - /* Convert ch to hex */ static int hex(const char ch) { @@ -328,7 +317,7 @@ static int hex_to_int(char **ptr, int *int_value) } /* Copy the binary array pointed to by buf into mem. Fix $, #, - and 0x7d escaped with 0x7d. Return a pointer to the character + and 0x7d escaped with 0x7d. Return a pointer to the character after the last byte written. */ static char *ebin_to_mem(const char *buf, char *mem, int count) { @@ -349,66 +338,6 @@ static char *pack_hex_byte(char *pkt, int byte) return pkt; } -#ifdef CONFIG_KGDB_THREAD - -/* Pack a thread ID */ -static char *pack_threadid(char *pkt, threadref * id) -{ - char *limit; - unsigned char *altid; - - altid = (unsigned char *) id; - - limit = pkt + BUF_THREAD_ID_SIZE; - while (pkt < limit) - pkt = pack_hex_byte(pkt, *altid++); - return pkt; -} - -/* Convert an integer into our threadref */ -static void int_to_threadref(threadref * id, const int value) -{ - unsigned char *scan = (unsigned char *) id; - int i = 4; - - while (i--) - *scan++ = 0; - - *scan++ = (value >> 24) & 0xff; - *scan++ = (value >> 16) & 0xff; - *scan++ = (value >> 8) & 0xff; - *scan++ = (value & 0xff); -} - -/* Return a task structure ptr for a particular pid */ -static struct task_struct *get_thread(int pid) -{ - struct task_struct *thread; - - /* Use PID_MAX w/gdb for pid 0 */ - if (pid == PID_MAX) pid = 0; - - /* First check via PID */ - thread = find_task_by_pid(pid); - - if (thread) - return thread; - - /* Start at the start */ - thread = init_tasks[0]; - - /* Walk along the linked list of tasks */ - do { - if (thread->pid == pid) - return thread; - thread = thread->next_task; - } while (thread != init_tasks[0]); - - return NULL; -} - -#endif /* CONFIG_KGDB_THREAD */ - /* Scan for the start char '$', read the packet and check the checksum */ static void get_packet(char *buffer, int buflen) { @@ -452,7 +381,7 @@ static void get_packet(char *buffer, int buflen) /* Ack successful transfer */ put_debug_char('+'); - /* If a sequence char is present, reply + /* If a sequence char is present, reply the sequence ID */ if (buffer[2] == ':') { put_debug_char(buffer[0]); @@ -611,74 +540,6 @@ static void gdb_regs_to_kgdb_regs(const int *gdb_regs, regs->vbr = gdb_regs[VBR]; } -#ifdef CONFIG_KGDB_THREAD -/* Make a local copy of registers from the specified thread */ -asmlinkage void ret_from_fork(void); -static void thread_regs_to_gdb_regs(const struct task_struct *thread, - int *gdb_regs) -{ - int regno; - int *tregs; - - /* Initialize to zero */ - for (regno = 0; regno < MAXREG; regno++) - gdb_regs[regno] = 0; - - /* Just making sure... */ - if (thread == NULL) - return; - - /* A new fork has pt_regs on the stack from a fork() call */ - if (thread->thread.pc == (unsigned long)ret_from_fork) { - - int vbr_val; - struct pt_regs *kregs; - kregs = (struct pt_regs*)thread->thread.sp; - - gdb_regs[R0] = kregs->regs[R0]; - gdb_regs[R1] = kregs->regs[R1]; - gdb_regs[R2] = kregs->regs[R2]; - gdb_regs[R3] = kregs->regs[R3]; - gdb_regs[R4] = kregs->regs[R4]; - gdb_regs[R5] = kregs->regs[R5]; - gdb_regs[R6] = kregs->regs[R6]; - gdb_regs[R7] = kregs->regs[R7]; - gdb_regs[R8] = kregs->regs[R8]; - gdb_regs[R9] = kregs->regs[R9]; - gdb_regs[R10] = kregs->regs[R10]; - gdb_regs[R11] = kregs->regs[R11]; - gdb_regs[R12] = kregs->regs[R12]; - gdb_regs[R13] = kregs->regs[R13]; - gdb_regs[R14] = kregs->regs[R14]; - gdb_regs[R15] = kregs->regs[R15]; - gdb_regs[PC] = kregs->pc; - gdb_regs[PR] = kregs->pr; - gdb_regs[GBR] = kregs->gbr; - gdb_regs[MACH] = kregs->mach; - gdb_regs[MACL] = kregs->macl; - gdb_regs[SR] = kregs->sr; - - asm("stc vbr, %0":"=r"(vbr_val)); - gdb_regs[VBR] = vbr_val; - return; - } - - /* Otherwise, we have only some registers from switch_to() */ - tregs = (int *)thread->thread.sp; - gdb_regs[R15] = (int)tregs; - gdb_regs[R14] = *tregs++; - gdb_regs[R13] = *tregs++; - gdb_regs[R12] = *tregs++; - gdb_regs[R11] = *tregs++; - gdb_regs[R10] = *tregs++; - gdb_regs[R9] = *tregs++; - gdb_regs[R8] = *tregs++; - gdb_regs[PR] = *tregs++; - gdb_regs[GBR] = *tregs++; - gdb_regs[PC] = thread->thread.pc; -} -#endif /* CONFIG_KGDB_THREAD */ - /* Calculate the new address for after a step */ static short *get_step_address(void) { @@ -759,7 +620,7 @@ static short *get_step_address(void) return (short *) addr; } -/* Set up a single-step. Replace the instruction immediately after the +/* Set up a single-step. Replace the instruction immediately after the current instruction (i.e. next in the expected flow of control) with a trap instruction, so that returning will cause only a single instruction to be executed. Note that this model is slightly broken for instructions @@ -797,37 +658,11 @@ static void undo_single_step(void) /* Send a signal message */ static void send_signal_msg(const int signum) { -#ifndef CONFIG_KGDB_THREAD out_buffer[0] = 'S'; out_buffer[1] = highhex(signum); out_buffer[2] = lowhex(signum); out_buffer[3] = 0; put_packet(out_buffer); -#else /* CONFIG_KGDB_THREAD */ - int threadid; - threadref thref; - char *out = out_buffer; - const char *tstring = "thread"; - - *out++ = 'T'; - *out++ = highhex(signum); - *out++ = lowhex(signum); - - while (*tstring) { - *out++ = *tstring++; - } - *out++ = ':'; - - threadid = trapped_thread->pid; - if (threadid == 0) threadid = PID_MAX; - int_to_threadref(&thref, threadid); - pack_threadid(out, &thref); - out += BUF_THREAD_ID_SIZE; - *out++ = ';'; - - *out = 0; - put_packet(out_buffer); -#endif /* CONFIG_KGDB_THREAD */ } /* Reply that all was well */ @@ -962,15 +797,7 @@ static void step_with_sig_msg(void) /* Send register contents */ static void send_regs_msg(void) { -#ifdef CONFIG_KGDB_THREAD - if (!current_thread) - kgdb_regs_to_gdb_regs(&trap_registers, registers); - else - thread_regs_to_gdb_regs(current_thread, registers); -#else kgdb_regs_to_gdb_regs(&trap_registers, registers); -#endif - mem_to_hex((char *) registers, out_buffer, NUMREGBYTES); put_packet(out_buffer); } @@ -978,201 +805,13 @@ static void send_regs_msg(void) /* Set register contents - currently can't set other thread's registers */ static void set_regs_msg(void) { -#ifdef CONFIG_KGDB_THREAD - if (!current_thread) { -#endif - kgdb_regs_to_gdb_regs(&trap_registers, registers); - hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES); - gdb_regs_to_kgdb_regs(registers, &trap_registers); - send_ok_msg(); -#ifdef CONFIG_KGDB_THREAD - } else - send_err_msg(); -#endif -} - - -#ifdef CONFIG_KGDB_THREAD - -/* Set the status for a thread */ -void set_thread_msg(void) -{ - int threadid; - struct task_struct *thread = NULL; - char *ptr; - - switch (in_buffer[1]) { - - /* To select which thread for gG etc messages, i.e. supported */ - case 'g': - - ptr = &in_buffer[2]; - hex_to_int(&ptr, &threadid); - thread = get_thread(threadid); - - /* If we haven't found it */ - if (!thread) { - send_err_msg(); - break; - } - - /* Set current_thread (or not) */ - if (thread == trapped_thread) - current_thread = NULL; - else - current_thread = thread; - send_ok_msg(); - break; - - /* To select which thread for cCsS messages, i.e. unsupported */ - case 'c': - send_ok_msg(); - break; - - default: - send_empty_msg(); - break; - } -} - -/* Is a thread alive? */ -static void thread_status_msg(void) -{ - char *ptr; - int threadid; - struct task_struct *thread = NULL; - - ptr = &in_buffer[1]; - hex_to_int(&ptr, &threadid); - thread = get_thread(threadid); - if (thread) - send_ok_msg(); - else - send_err_msg(); -} -/* Send the current thread ID */ -static void thread_id_msg(void) -{ - int threadid; - threadref thref; - - out_buffer[0] = 'Q'; - out_buffer[1] = 'C'; - - if (current_thread) - threadid = current_thread->pid; - else if (trapped_thread) - threadid = trapped_thread->pid; - else /* Impossible, but just in case! */ - { - send_err_msg(); - return; - } - - /* Translate pid 0 to PID_MAX for gdb */ - if (threadid == 0) threadid = PID_MAX; - - int_to_threadref(&thref, threadid); - pack_threadid(out_buffer + 2, &thref); - out_buffer[2 + BUF_THREAD_ID_SIZE] = '\0'; - put_packet(out_buffer); -} - -/* Send thread info */ -static void thread_info_msg(void) -{ - struct task_struct *thread = NULL; - int threadid; - char *pos; - threadref thref; - - /* Start with 'm' */ - out_buffer[0] = 'm'; - pos = &out_buffer[1]; - - /* For all possible thread IDs - this will overrun if > 44 threads! */ - /* Start at 1 and include PID_MAX (since GDB won't use pid 0...) */ - for (threadid = 1; threadid <= PID_MAX; threadid++) { - - read_lock(&tasklist_lock); - thread = get_thread(threadid); - read_unlock(&tasklist_lock); - - /* If it's a valid thread */ - if (thread) { - int_to_threadref(&thref, threadid); - pack_threadid(pos, &thref); - pos += BUF_THREAD_ID_SIZE; - *pos++ = ','; - } - } - *--pos = 0; /* Lose final comma */ - put_packet(out_buffer); - -} - -/* Return printable info for gdb's 'info threads' command */ -static void thread_extra_info_msg(void) -{ - int threadid; - struct task_struct *thread = NULL; - char buffer[20], *ptr; - int i; - - /* Extract thread ID */ - ptr = &in_buffer[17]; - hex_to_int(&ptr, &threadid); - thread = get_thread(threadid); - - /* If we don't recognise it, say so */ - if (thread == NULL) - strcpy(buffer, "(unknown)"); - else - strcpy(buffer, thread->comm); - - /* Construct packet */ - for (i = 0, ptr = out_buffer; buffer[i]; i++) - ptr = pack_hex_byte(ptr, buffer[i]); - - if (thread->thread.pc == (unsigned long)ret_from_fork) { - strcpy(buffer, "<new fork>"); - for (i = 0; buffer[i]; i++) - ptr = pack_hex_byte(ptr, buffer[i]); - } - - *ptr = '\0'; - put_packet(out_buffer); -} - -/* Handle all qFooBarBaz messages - have to use an if statement as - opposed to a switch because q messages can have > 1 char id. */ -static void query_msg(void) -{ - const char *q_start = &in_buffer[1]; - - /* qC = return current thread ID */ - if (strncmp(q_start, "C", 1) == 0) - thread_id_msg(); - - /* qfThreadInfo = query all threads (first) */ - else if (strncmp(q_start, "fThreadInfo", 11) == 0) - thread_info_msg(); - - /* qsThreadInfo = query all threads (subsequent). We know we have sent - them all after the qfThreadInfo message, so there are no to send */ - else if (strncmp(q_start, "sThreadInfo", 11) == 0) - put_packet("l"); /* el = last */ - - /* qThreadExtraInfo = supply printable information per thread */ - else if (strncmp(q_start, "ThreadExtraInfo", 15) == 0) - thread_extra_info_msg(); - - /* Unsupported - empty message as per spec */ - else - send_empty_msg(); + kgdb_regs_to_gdb_regs(&trap_registers, registers); + hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES); + gdb_regs_to_kgdb_regs(registers, &trap_registers); + send_ok_msg(); } -#endif /* CONFIG_KGDB_THREAD */ +#ifdef CONFIG_SH_KGDB_CONSOLE /* * Bring up the ports.. */ @@ -1185,6 +824,9 @@ static int kgdb_serial_setup(void) return 0; } +#else +#define kgdb_serial_setup() 0 +#endif /* The command loop, read and act on requests */ static void kgdb_command_loop(const int excep_code, const int trapa_value) @@ -1193,7 +835,7 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) if (excep_code == NMI_VEC) { #ifndef CONFIG_KGDB_NMI - KGDB_PRINTK("Ignoring unexpected NMI?\n"); + printk(KERN_NOTICE "KGDB: Ignoring unexpected NMI?\n"); return; #else /* CONFIG_KGDB_NMI */ if (!kgdb_enabled) { @@ -1207,19 +849,10 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) if (!kgdb_enabled) return; -#ifdef CONFIG_KGDB_THREAD - /* Until GDB specifies a thread */ - current_thread = NULL; - trapped_thread = current; -#endif - /* Enter GDB mode (e.g. after detach) */ if (!kgdb_in_gdb_mode) { /* Do serial setup, notify user, issue preemptive ack */ - kgdb_serial_setup(); - KGDB_PRINTK("Waiting for GDB (on %s%d at %d baud)\n", - (kgdb_porttype ? kgdb_porttype->name : ""), - kgdb_portnum, kgdb_baud); + printk(KERN_NOTICE "KGDB: Waiting for GDB\n"); kgdb_in_gdb_mode = 1; put_debug_char('+'); } @@ -1233,21 +866,18 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) will later be replaced by its original one. Do NOT do this for trap 0xff, since that indicates a compiled-in breakpoint which will not be replaced (and we would retake the trap forever) */ - if ((excep_code == TRAP_VEC) && (trapa_value != (0xff << 2))) { + if ((excep_code == TRAP_VEC) && (trapa_value != (0x3c << 2))) trap_registers.pc -= 2; - } /* Undo any stepping we may have done */ undo_single_step(); while (1) { - out_buffer[0] = 0; get_packet(in_buffer, BUFMAX); /* Examine first char of buffer to see what we need to do */ switch (in_buffer[0]) { - case '?': /* Send which signal we've received */ send_signal_msg(sigval); break; @@ -1291,21 +921,6 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) step_msg(); return; -#ifdef CONFIG_KGDB_THREAD - - case 'H': /* Task related */ - set_thread_msg(); - break; - - case 'T': /* Query thread status */ - thread_status_msg(); - break; - - case 'q': /* Handle query - currently thread-related */ - query_msg(); - break; -#endif - case 'k': /* 'Kill the program' with a kernel ? */ break; @@ -1323,11 +938,8 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) } /* There has been an exception, most likely a breakpoint. */ -asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) +static void handle_exception(struct pt_regs *regs) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); int excep_code, vbr_val; int count; int trapa_value = ctrl_inl(TRA); @@ -1355,7 +967,7 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, kgdb_trapa_val = trapa_value; /* Act on the exception */ - kgdb_command_loop(excep_code >> 5, trapa_value); + kgdb_command_loop(excep_code, trapa_value); kgdb_current = NULL; @@ -1373,14 +985,12 @@ asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, asm("ldc %0, vbr": :"r"(vbr_val)); } -/* Trigger a breakpoint by function */ -void breakpoint(void) +asmlinkage void kgdb_handle_exception(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) { - if (!kgdb_enabled) { - kgdb_enabled = 1; - kgdb_init(); - } - BREAKPOINT(); + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + handle_exception(regs); } /* Initialise the KGDB data structures and serial configuration */ @@ -1395,24 +1005,16 @@ int kgdb_init(void) kgdb_in_gdb_mode = 0; if (kgdb_serial_setup() != 0) { - KGDB_PRINTK("serial setup error\n"); + printk(KERN_NOTICE "KGDB: serial setup error\n"); return -1; } /* Init ptr to exception handler */ - kgdb_debug_hook = kgdb_handle_exception; + kgdb_debug_hook = handle_exception; kgdb_bus_err_hook = kgdb_handle_bus_error; /* Enter kgdb now if requested, or just report init done */ - if (kgdb_halt) { - kgdb_in_gdb_mode = 1; - put_debug_char('+'); - breakpoint(); - } - else - { - KGDB_PRINTK("stub is initialized.\n"); - } + printk(KERN_NOTICE "KGDB: stub is initialized.\n"); return 0; } @@ -1437,7 +1039,7 @@ static void kgdb_msg_write(const char *s, unsigned count) /* Calculate how many this time */ wcount = (count > MAXOUT) ? MAXOUT : count; - + /* Pack in hex chars */ for (i = 0; i < wcount; i++) bufptr = pack_hex_byte(bufptr, s[i]); @@ -1467,3 +1069,25 @@ void kgdb_console_write(struct console *co, const char *s, unsigned count) kgdb_msg_write(s, count); } #endif + +#ifdef CONFIG_KGDB_SYSRQ +static void sysrq_handle_gdb(int key, struct tty_struct *tty) +{ + printk("Entering GDB stub\n"); + breakpoint(); +} + +static struct sysrq_key_op sysrq_gdb_op = { + .handler = sysrq_handle_gdb, + .help_msg = "Gdb", + .action_msg = "GDB", +}; + +static int gdb_register_sysrq(void) +{ + printk("Registering GDB sysrq handler\n"); + register_sysrq_key('g', &sysrq_gdb_op); + return 0; +} +module_init(gdb_register_sysrq); +#endif diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 08587cd..790ed69 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -59,13 +59,13 @@ static void kexec_info(struct kimage *image) printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n", i, (unsigned int)image->segment[i].mem, - (unsigned int)image->segment[i].mem + image->segment[i].memsz, + (unsigned int)image->segment[i].mem + + image->segment[i].memsz, (unsigned int)image->segment[i].memsz); - } + } printk(" start : 0x%08x\n\n", (unsigned int)image->start); } - /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. @@ -101,6 +101,27 @@ NORET_TYPE void machine_kexec(struct kimage *image) /* now call it */ rnk = (relocate_new_kernel_t) reboot_code_buffer; - (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); + (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); } +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never sets it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init parse_crashkernel(char *arg) +{ + unsigned long size, base; + size = memparse(arg, &arg); + if (*arg == '@') { + base = memparse(arg+1, &arg); + /* FIXME: Do I want a sanity check + * to validate the memory range? + */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; +} +early_param("crashkernel", parse_crashkernel); diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index e760736..329b3f3 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -7,7 +7,7 @@ * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC - * Copyright (C) 2002 - 2006 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt */ #include <linux/module.h> #include <linux/mm.h> @@ -15,6 +15,7 @@ #include <linux/pm.h> #include <linux/kallsyms.h> #include <linux/kexec.h> +#include <asm/kdebug.h> #include <asm/uaccess.h> #include <asm/mmu_context.h> #include <asm/ubc.h> @@ -299,7 +300,8 @@ static void ubc_set_tracing(int asid, unsigned long pc) ctrl_outl(0, UBC_BAMRA); if (current_cpu_data.type == CPU_SH7729 || - current_cpu_data.type == CPU_SH7710) { + current_cpu_data.type == CPU_SH7710 || + current_cpu_data.type == CPU_SH7712) { ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA); ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR); } else { @@ -495,6 +497,10 @@ asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, /* Rewind */ regs->pc -= 2; + if (notify_die(DIE_TRAP, regs, regs->tra & 0xff, + SIGTRAP) == NOTIFY_STOP) + return; + force_sig(SIGTRAP, current); } @@ -510,6 +516,10 @@ asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, /* Rewind */ regs->pc -= 2; + if (notify_die(DIE_TRAP, regs, TRAPA_BUG_OPCODE & 0xff, + SIGTRAP) == NOTIFY_STOP) + return; + #ifdef CONFIG_BUG if (__kernel_text_address(instruction_pointer(regs))) { u16 insn = *(u16 *)instruction_pointer(regs); diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 98802ab..477d2a8 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -4,7 +4,7 @@ * This file handles the architecture-dependent parts of initialization * * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2002 - 2006 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt */ #include <linux/screen_info.h> #include <linux/ioport.h> @@ -15,21 +15,22 @@ #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/utsname.h> +#include <linux/nodemask.h> #include <linux/cpu.h> #include <linux/pfn.h> #include <linux/fs.h> +#include <linux/mm.h> +#include <linux/kexec.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/sections.h> #include <asm/irq.h> #include <asm/setup.h> #include <asm/clock.h> +#include <asm/mmu_context.h> -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -static int kgdb_parse_options(char *options); -#endif extern void * __rd_start, * __rd_end; + /* * Machine setup.. */ @@ -205,53 +206,33 @@ static int __init sh_mv_setup(char **cmdline_p) return 0; } -void __init setup_arch(char **cmdline_p) +/* + * Register fully available low RAM pages with the bootmem allocator. + */ +static void __init register_bootmem_low_pages(void) { - unsigned long bootmap_size; - unsigned long start_pfn, max_pfn, max_low_pfn; - -#ifdef CONFIG_CMDLINE_BOOL - strcpy(COMMAND_LINE, CONFIG_CMDLINE); -#endif - - ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); - -#ifdef CONFIG_BLK_DEV_RAM - rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; - rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); - rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); -#endif - - if (!MOUNT_ROOT_RDONLY) - root_mountflags &= ~MS_RDONLY; - init_mm.start_code = (unsigned long) _text; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = (unsigned long) _end; - - code_resource.start = (unsigned long)virt_to_phys(_text); - code_resource.end = (unsigned long)virt_to_phys(_etext)-1; - data_resource.start = (unsigned long)virt_to_phys(_etext); - data_resource.end = (unsigned long)virt_to_phys(_edata)-1; - - sh_mv_setup(cmdline_p); - + unsigned long curr_pfn, last_pfn, pages; /* - * Find the highest page frame number we have available + * We are rounding up the start address of usable memory: */ - max_pfn = PFN_DOWN(__pa(memory_end)); + curr_pfn = PFN_UP(__MEMORY_START); /* - * Determine low and high memory ranges: + * ... and at the end of the usable range downwards: */ - max_low_pfn = max_pfn; + last_pfn = PFN_DOWN(__pa(memory_end)); - /* - * Partially used pages are not usable - thus - * we are rounding upwards: - */ - start_pfn = PFN_UP(__pa(_end)); + if (last_pfn > max_low_pfn) + last_pfn = max_low_pfn; + + pages = last_pfn - curr_pfn; + free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(pages)); +} + +void __init setup_bootmem_allocator(unsigned long start_pfn) +{ + unsigned long bootmap_size; /* * Find a proper area for the bootmem bitmap. After this @@ -259,31 +240,11 @@ void __init setup_arch(char **cmdline_p) * is intact) must be done via bootmem_alloc(). */ bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn, - __MEMORY_START>>PAGE_SHIFT, - max_low_pfn); - /* - * Register fully available low RAM pages with the bootmem allocator. - */ - { - unsigned long curr_pfn, last_pfn, pages; - - /* - * We are rounding up the start address of usable memory: - */ - curr_pfn = PFN_UP(__MEMORY_START); - /* - * ... and at the end of the usable range downwards: - */ - last_pfn = PFN_DOWN(__pa(memory_end)); + min_low_pfn, max_low_pfn); - if (last_pfn > max_low_pfn) - last_pfn = max_low_pfn; - - pages = last_pfn - curr_pfn; - free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn), - PFN_PHYS(pages)); - } + register_bootmem_low_pages(); + node_set_online(0); /* * Reserve the kernel text and @@ -292,14 +253,14 @@ void __init setup_arch(char **cmdline_p) * case of us accidentally initializing the bootmem allocator with * an invalid RAM area. */ - reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE, + reserve_bootmem(__MEMORY_START+PAGE_SIZE, (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START); /* * reserve physical page 0 - it's a special BIOS page on many boxes, * enabling clean reboots, SMP operation, laptop functions. */ - reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE); + reserve_bootmem(__MEMORY_START, PAGE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); @@ -313,8 +274,8 @@ void __init setup_arch(char **cmdline_p) if (LOADER_TYPE && INITRD_START) { if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) { - reserve_bootmem_node(NODE_DATA(0), INITRD_START + - __MEMORY_START, INITRD_SIZE); + reserve_bootmem(INITRD_START + __MEMORY_START, + INITRD_SIZE); initrd_start = INITRD_START + PAGE_OFFSET + __MEMORY_START; initrd_end = initrd_start + INITRD_SIZE; @@ -327,6 +288,76 @@ void __init setup_arch(char **cmdline_p) } } #endif +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + reserve_bootmem(crashk_res.start, + crashk_res.end - crashk_res.start + 1); +#endif +} + +#ifndef CONFIG_NEED_MULTIPLE_NODES +static void __init setup_memory(void) +{ + unsigned long start_pfn; + + /* + * Partially used pages are not usable - thus + * we are rounding upwards: + */ + start_pfn = PFN_UP(__pa(_end)); + setup_bootmem_allocator(start_pfn); +} +#else +extern void __init setup_memory(void); +#endif + +void __init setup_arch(char **cmdline_p) +{ + enable_mmu(); + +#ifdef CONFIG_CMDLINE_BOOL + strcpy(COMMAND_LINE, CONFIG_CMDLINE); +#endif + + ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV); + +#ifdef CONFIG_BLK_DEV_RAM + rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; + rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); + rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); +#endif + + if (!MOUNT_ROOT_RDONLY) + root_mountflags &= ~MS_RDONLY; + init_mm.start_code = (unsigned long) _text; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = (unsigned long) _end; + + code_resource.start = virt_to_phys(_text); + code_resource.end = virt_to_phys(_etext)-1; + data_resource.start = virt_to_phys(_etext); + data_resource.end = virt_to_phys(_edata)-1; + + parse_early_param(); + + sh_mv_setup(cmdline_p); + + /* + * Find the highest page frame number we have available + */ + max_pfn = PFN_DOWN(__pa(memory_end)); + + /* + * Determine low and high memory ranges: + */ + max_low_pfn = max_pfn; + min_low_pfn = __MEMORY_START >> PAGE_SHIFT; + + nodes_clear(node_online_map); + setup_memory(); + paging_init(); + sparse_init(); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -335,8 +366,6 @@ void __init setup_arch(char **cmdline_p) /* Perform the machine specific initialisation */ if (likely(sh_mv.mv_setup)) sh_mv.mv_setup(cmdline_p); - - paging_init(); } struct sh_machine_vector* __init get_mv_byname(const char* name) @@ -380,6 +409,7 @@ static const char *cpu_name[] = { [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", + [CPU_SH7712] = "SH7712", [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", @@ -477,7 +507,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) c->loops_per_jiffy/(500000/HZ), (c->loops_per_jiffy/(5000/HZ)) % 100); - return show_clocks(m); + return 0; } static void *c_start(struct seq_file *m, loff_t *pos) @@ -499,92 +529,3 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; #endif /* CONFIG_PROC_FS */ - -#ifdef CONFIG_SH_KGDB -/* - * Parse command-line kgdb options. By default KGDB is enabled, - * entered on error (or other action) using default serial info. - * The command-line option can include a serial port specification - * and an action to override default or configured behavior. - */ -struct kgdb_sermap kgdb_sci_sermap = -{ "ttySC", 5, kgdb_sci_setup, NULL }; - -struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap; -struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap; - -void kgdb_register_sermap(struct kgdb_sermap *map) -{ - struct kgdb_sermap *last; - - for (last = kgdb_serlist; last->next; last = last->next) - ; - last->next = map; - if (!map->namelen) { - map->namelen = strlen(map->name); - } -} - -static int __init kgdb_parse_options(char *options) -{ - char c; - int baud; - - /* Check for port spec (or use default) */ - - /* Determine port type and instance */ - if (!memcmp(options, "tty", 3)) { - struct kgdb_sermap *map = kgdb_serlist; - - while (map && memcmp(options, map->name, map->namelen)) - map = map->next; - - if (!map) { - KGDB_PRINTK("unknown port spec in %s\n", options); - return -1; - } - - kgdb_porttype = map; - kgdb_serial_setup = map->setup_fn; - kgdb_portnum = options[map->namelen] - '0'; - options += map->namelen + 1; - - options = (*options == ',') ? options+1 : options; - - /* Read optional parameters (baud/parity/bits) */ - baud = simple_strtoul(options, &options, 10); - if (baud != 0) { - kgdb_baud = baud; - - c = toupper(*options); - if (c == 'E' || c == 'O' || c == 'N') { - kgdb_parity = c; - options++; - } - - c = *options; - if (c == '7' || c == '8') { - kgdb_bits = c; - options++; - } - options = (*options == ',') ? options+1 : options; - } - } - - /* Check for action specification */ - if (!memcmp(options, "halt", 4)) { - kgdb_halt = 1; - options += 4; - } else if (!memcmp(options, "disabled", 8)) { - kgdb_enabled = 0; - options += 8; - } - - if (*options) { - KGDB_PRINTK("ignored unknown options: %s\n", options); - return 0; - } - return 1; -} -__setup("kgdb=", kgdb_parse_options); -#endif /* CONFIG_SH_KGDB */ diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms.c index 6e0d10f..17f0b50 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms.c @@ -65,7 +65,6 @@ EXPORT_SYMBOL(__div64_32); /* These symbols are generated by the compiler itself */ DECLARE_EXPORT(__udivsi3); -DECLARE_EXPORT(__udivdi3); DECLARE_EXPORT(__sdivsi3); DECLARE_EXPORT(__ashrdi3); DECLARE_EXPORT(__ashldi3); diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index e060e71..ad1ede5 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -148,7 +148,9 @@ static int tmu_timer_init(void) /* Start TMU0 */ tmu_timer_stop(); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7785) ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); #endif diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index e9f168f..7b40f0f 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -5,7 +5,7 @@ * SuperH version: Copyright (C) 1999 Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf * Copyright (C) 2000 David Howells - * Copyright (C) 2002 - 2006 Paul Mundt + * Copyright (C) 2002 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -18,10 +18,12 @@ #include <linux/module.h> #include <linux/kallsyms.h> #include <linux/io.h> +#include <linux/bug.h> #include <linux/debug_locks.h> #include <linux/limits.h> #include <asm/system.h> #include <asm/uaccess.h> +#include <asm/kdebug.h> #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> @@ -74,7 +76,21 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top) } } -DEFINE_SPINLOCK(die_lock); +ATOMIC_NOTIFIER_HEAD(shdie_chain); + +int register_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&shdie_chain, nb); +} +EXPORT_SYMBOL(register_die_notifier); + +int unregister_die_notifier(struct notifier_block *nb) +{ + return atomic_notifier_chain_unregister(&shdie_chain, nb); +} +EXPORT_SYMBOL(unregister_die_notifier); + +static DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { @@ -130,40 +146,6 @@ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) return -EFAULT; } -#ifdef CONFIG_BUG -#ifdef CONFIG_DEBUG_BUGVERBOSE -static inline void do_bug_verbose(struct pt_regs *regs) -{ - struct bug_frame f; - long len; - - if (__copy_from_user(&f, (const void __user *)regs->pc, - sizeof(struct bug_frame))) - return; - - len = __strnlen_user(f.file, PATH_MAX) - 1; - if (unlikely(len < 0 || len >= PATH_MAX)) - f.file = "<bad filename>"; - len = __strnlen_user(f.func, PATH_MAX) - 1; - if (unlikely(len < 0 || len >= PATH_MAX)) - f.func = "<bad function>"; - - printk(KERN_ALERT "kernel BUG in %s() at %s:%d!\n", - f.func, f.file, f.line); -} -#else -static inline void do_bug_verbose(struct pt_regs *regs) -{ -} -#endif /* CONFIG_DEBUG_BUGVERBOSE */ - -void handle_BUG(struct pt_regs *regs) -{ - do_bug_verbose(regs); - die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); -} -#endif /* CONFIG_BUG */ - /* * handle an instruction that does an unaligned memory access by emulating the * desired behaviour @@ -888,6 +870,25 @@ void __init trap_init(void) per_cpu_trap_init(); } +#ifdef CONFIG_BUG +void handle_BUG(struct pt_regs *regs) +{ + enum bug_trap_type tt; + tt = report_bug(regs->pc); + if (tt == BUG_TRAP_TYPE_WARN) { + regs->pc += 2; + return; + } + + die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); +} + +int is_valid_bugaddr(unsigned long addr) +{ + return addr >= PAGE_OFFSET; +} +#endif + void show_trace(struct task_struct *tsk, unsigned long *sp, struct pt_regs *regs) { diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 78a6c09..d83143c 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -34,9 +34,11 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; + _etext = .; /* End of text section */ + RODATA - _etext = .; /* End of text section */ + BUG_TABLE .data : { /* Data */ *(.data) @@ -53,8 +55,12 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data.page_aligned : { *(.data.page_aligned) } + __nosave_begin = .; + .data_nosave : { *(.data.nosave) } + . = ALIGN(PAGE_SIZE); + __nosave_end = .; - . = ALIGN(L1_CACHE_BYTES); + . = ALIGN(PAGE_SIZE); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } __per_cpu_end = .; @@ -110,43 +116,10 @@ SECTIONS * it's a module. */ /DISCARD/ : { - *(.exit.text) - *(.exit.data) *(.exitcall.exit) } - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - Symbols in the DWARF debugging section are relative to the beginning - of the section so we begin .debug at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - /* These must appear regardless of . */ + STABS_DEBUG + + DWARF_DEBUG } |
