diff options
Diffstat (limited to 'arch/sh/drivers')
23 files changed, 911 insertions, 473 deletions
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 391cbe1..3cee58e 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -40,10 +40,10 @@ static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id) static int pvr2_request_dma(struct dma_channel *chan) { - if (ctrl_inl(PVR2_DMA_MODE) != 0) + if (__raw_readl(PVR2_DMA_MODE) != 0) return -EBUSY; - ctrl_outl(0, PVR2_DMA_LMMODE0); + __raw_writel(0, PVR2_DMA_LMMODE0); return 0; } @@ -60,9 +60,9 @@ static int pvr2_xfer_dma(struct dma_channel *chan) xfer_complete = 0; - ctrl_outl(chan->dar, PVR2_DMA_ADDR); - ctrl_outl(chan->count, PVR2_DMA_COUNT); - ctrl_outl(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE); + __raw_writel(chan->dar, PVR2_DMA_ADDR); + __raw_writel(chan->count, PVR2_DMA_COUNT); + __raw_writel(chan->mode & DMA_MODE_MASK, PVR2_DMA_MODE); return 0; } diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 37fb5b8..8272087 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -52,11 +52,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan) * * iterations to complete the transfer. */ +static unsigned int ts_shift[] = TS_SHIFT; static inline unsigned int calc_xmit_shift(struct dma_channel *chan) { - u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); + u32 chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR); + int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) | + ((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT); - return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT]; + return ts_shift[cnt]; } /* @@ -70,13 +73,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id) struct dma_channel *chan = dev_id; u32 chcr; - chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); + chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR); if (!(chcr & CHCR_TE)) return IRQ_NONE; chcr &= ~(CHCR_IE | CHCR_DE); - ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); + __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR)); wake_up(&chan->wait_queue); @@ -115,7 +118,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) chan->flags &= ~DMA_TEI_CAPABLE; } - ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); + __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR)); chan->flags |= DMA_CONFIGURED; return 0; @@ -126,13 +129,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan) int irq; u32 chcr; - chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); + chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR); chcr |= CHCR_DE; if (chan->flags & DMA_TEI_CAPABLE) chcr |= CHCR_IE; - ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); + __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR)); if (chan->flags & DMA_TEI_CAPABLE) { irq = get_dmte_irq(chan->chan); @@ -150,9 +153,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan) disable_irq(irq); } - chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); + chcr = __raw_readl(dma_base_addr[chan->chan] + CHCR); chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); - ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); + __raw_writel(chcr, (dma_base_addr[chan->chan] + CHCR)); } static int sh_dmac_xfer_dma(struct dma_channel *chan) @@ -183,12 +186,12 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) */ if (chan->sar || (mach_is_dreamcast() && chan->chan == PVR2_CASCADE_CHAN)) - ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR)); + __raw_writel(chan->sar, (dma_base_addr[chan->chan]+SAR)); if (chan->dar || (mach_is_dreamcast() && chan->chan == PVR2_CASCADE_CHAN)) - ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR)); + __raw_writel(chan->dar, (dma_base_addr[chan->chan] + DAR)); - ctrl_outl(chan->count >> calc_xmit_shift(chan), + __raw_writel(chan->count >> calc_xmit_shift(chan), (dma_base_addr[chan->chan] + TCR)); sh_dmac_enable_dma(chan); @@ -198,10 +201,10 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) static int sh_dmac_get_dma_residue(struct dma_channel *chan) { - if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE)) + if (!(__raw_readl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE)) return 0; - return ctrl_inl(dma_base_addr[chan->chan] + TCR) + return __raw_readl(dma_base_addr[chan->chan] + TCR) << calc_xmit_shift(chan); } diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c index 5e22689..72622e3 100644 --- a/arch/sh/drivers/dma/dmabrg.c +++ b/arch/sh/drivers/dma/dmabrg.c @@ -86,8 +86,8 @@ static irqreturn_t dmabrg_irq(int irq, void *data) unsigned long dcr; unsigned int i; - dcr = ctrl_inl(DMABRGCR); - ctrl_outl(dcr & ~0x00ff0003, DMABRGCR); /* ack all */ + dcr = __raw_readl(DMABRGCR); + __raw_writel(dcr & ~0x00ff0003, DMABRGCR); /* ack all */ dcr &= dcr >> 8; /* ignore masked */ /* USB stuff, get it out of the way first */ @@ -109,17 +109,17 @@ static irqreturn_t dmabrg_irq(int irq, void *data) static void dmabrg_disable_irq(unsigned int dmairq) { unsigned long dcr; - dcr = ctrl_inl(DMABRGCR); + dcr = __raw_readl(DMABRGCR); dcr &= ~(1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8)); - ctrl_outl(dcr, DMABRGCR); + __raw_writel(dcr, DMABRGCR); } static void dmabrg_enable_irq(unsigned int dmairq) { unsigned long dcr; - dcr = ctrl_inl(DMABRGCR); + dcr = __raw_readl(DMABRGCR); dcr |= (1 << ((dmairq > 1) ? dmairq + 22 : dmairq + 8)); - ctrl_outl(dcr, DMABRGCR); + __raw_writel(dcr, DMABRGCR); } int dmabrg_request_irq(unsigned int dmairq, void(*handler)(void*), @@ -165,13 +165,13 @@ static int __init dmabrg_init(void) printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n"); #endif - ctrl_outl(0, DMABRGCR); - ctrl_outl(0, DMACHCR0); - ctrl_outl(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */ + __raw_writel(0, DMABRGCR); + __raw_writel(0, DMACHCR0); + __raw_writel(0x94000000, DMARSRA); /* enable DMABRG in DMAC 0 */ /* enable DMABRG mode, enable the DMAC */ - or = ctrl_inl(DMAOR); - ctrl_outl(or | DMAOR_BRG | DMAOR_DMEN, DMAOR); + or = __raw_readl(DMAOR); + __raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR); ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED, "DMABRG USB address error", NULL); diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index a9339a6..2acbc79 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -1,7 +1,7 @@ /* * Generic heartbeat driver for regular LED banks * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2010 Paul Mundt * * Most SH reference boards include a number of individual LEDs that can * be independently controlled (either via a pre-defined hardware @@ -27,7 +27,7 @@ #include <asm/heartbeat.h> #define DRV_NAME "heartbeat" -#define DRV_VERSION "0.1.1" +#define DRV_VERSION "0.1.2" static unsigned char default_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 }; @@ -98,7 +98,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev) return -ENOMEM; } - hd->base = ioremap_nocache(res->start, res->end - res->start + 1); + hd->base = ioremap_nocache(res->start, resource_size(res)); if (unlikely(!hd->base)) { dev_err(&pdev->dev, "ioremap failed\n"); @@ -117,8 +117,20 @@ static int heartbeat_drv_probe(struct platform_device *pdev) for (i = 0; i < hd->nr_bits; i++) hd->mask |= (1 << hd->bit_pos[i]); - if (!hd->regsize) - hd->regsize = 8; /* default access size */ + if (!hd->regsize) { + switch (res->flags & IORESOURCE_MEM_TYPE_MASK) { + case IORESOURCE_MEM_32BIT: + hd->regsize = 32; + break; + case IORESOURCE_MEM_16BIT: + hd->regsize = 16; + break; + case IORESOURCE_MEM_8BIT: + default: + hd->regsize = 8; + break; + } + } setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd); platform_set_drvdata(pdev, hd); diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 08af1f4..4a59e68 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,14 +1,14 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o +obj-y += common.o pci.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o -obj-$(CONFIG_CPU_SUBTYPE_SH7786) += ops-sh7786.o +obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ @@ -25,4 +25,3 @@ obj-$(CONFIG_SH_TITAN) += fixups-titan.o obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o -obj-$(CONFIG_SH_URQUELL) += pcie-sh7786.o diff --git a/arch/sh/drivers/pci/common.c b/arch/sh/drivers/pci/common.c new file mode 100644 index 0000000..dbf1381 --- /dev/null +++ b/arch/sh/drivers/pci/common.c @@ -0,0 +1,162 @@ +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/kernel.h> + +/* + * These functions are used early on before PCI scanning is done + * and all of the pci_dev and pci_bus structures have been created. + */ +static struct pci_dev *fake_pci_dev(struct pci_channel *hose, + int top_bus, int busnr, int devfn) +{ + static struct pci_dev dev; + static struct pci_bus bus; + + dev.bus = &bus; + dev.sysdata = hose; + dev.devfn = devfn; + bus.number = busnr; + bus.sysdata = hose; + bus.ops = hose->pci_ops; + + if(busnr != top_bus) + /* Fake a parent bus structure. */ + bus.parent = &bus; + else + bus.parent = NULL; + + return &dev; +} + +#define EARLY_PCI_OP(rw, size, type) \ +int __init early_##rw##_config_##size(struct pci_channel *hose, \ + int top_bus, int bus, int devfn, int offset, type value) \ +{ \ + return pci_##rw##_config_##size( \ + fake_pci_dev(hose, top_bus, bus, devfn), \ + offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, word, u16 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, word, u16) +EARLY_PCI_OP(write, dword, u32) + +int __init pci_is_66mhz_capable(struct pci_channel *hose, + int top_bus, int current_bus) +{ + u32 pci_devfn; + unsigned short vid; + int cap66 = -1; + u16 stat; + + printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); + + for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { + if (PCI_FUNC(pci_devfn)) + continue; + if (early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_VENDOR_ID, &vid) != + PCIBIOS_SUCCESSFUL) + continue; + if (vid == 0xffff) + continue; + + /* check 66MHz capability */ + if (cap66 < 0) + cap66 = 1; + if (cap66) { + early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_STATUS, &stat); + if (!(stat & PCI_STATUS_66MHZ)) { + printk(KERN_DEBUG + "PCI: %02x:%02x not 66MHz capable.\n", + current_bus, pci_devfn); + cap66 = 0; + break; + } + } + } + + return cap66 > 0; +} + +static void pcibios_enable_err(unsigned long __data) +{ + struct pci_channel *hose = (struct pci_channel *)__data; + + del_timer(&hose->err_timer); + printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n"); + enable_irq(hose->err_irq); +} + +static void pcibios_enable_serr(unsigned long __data) +{ + struct pci_channel *hose = (struct pci_channel *)__data; + + del_timer(&hose->serr_timer); + printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n"); + enable_irq(hose->serr_irq); +} + +void pcibios_enable_timers(struct pci_channel *hose) +{ + if (hose->err_irq) { + init_timer(&hose->err_timer); + hose->err_timer.data = (unsigned long)hose; + hose->err_timer.function = pcibios_enable_err; + } + + if (hose->serr_irq) { + init_timer(&hose->serr_timer); + hose->serr_timer.data = (unsigned long)hose; + hose->serr_timer.function = pcibios_enable_serr; + } +} + +/* + * A simple handler for the regular PCI status errors, called from IRQ + * context. + */ +unsigned int pcibios_handle_status_errors(unsigned long addr, + unsigned int status, + struct pci_channel *hose) +{ + unsigned int cmd = 0; + + if (status & PCI_STATUS_REC_MASTER_ABORT) { + printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr); + cmd |= PCI_STATUS_REC_MASTER_ABORT; + } + + if (status & PCI_STATUS_REC_TARGET_ABORT) { + printk(KERN_DEBUG "PCI: target abort: "); + pcibios_report_status(PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_SIG_TARGET_ABORT | + PCI_STATUS_REC_MASTER_ABORT, 1); + printk("\n"); + + cmd |= PCI_STATUS_REC_TARGET_ABORT; + } + + if (status & (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY)) { + printk(KERN_DEBUG "PCI: parity error detected: "); + pcibios_report_status(PCI_STATUS_PARITY | + PCI_STATUS_DETECTED_PARITY, 1); + printk("\n"); + + cmd |= PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY; + + /* Now back off of the IRQ for awhile */ + if (hose->err_irq) { + disable_irq_nosync(hose->err_irq); + hose->err_timer.expires = jiffies + HZ; + add_timer(&hose->err_timer); + } + } + + return cmd; +} diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index ed7f489..942ef4f 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -39,7 +39,7 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) /* * We also assume that dev->devfn == 0 */ - dev->resource[1].start = p->io_resource->start + 0x100; + dev->resource[1].start = p->resources[0].start + 0x100; dev->resource[1].end = dev->resource[1].start + 0x200 - 1; /* diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 15ca65c..08b2d86 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -22,15 +22,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } - -int pci_fixup_pcic(struct pci_channel *chan) -{ - pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); - pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); - pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); - pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); - pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - - return 0; -} diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 7898f14..e248516 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -43,7 +43,7 @@ int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; - bcr1 = ctrl_inl(SH7751_BCR1); + bcr1 = __raw_readl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ pci_write_reg(chan, bcr1, SH4_PCIBCR1); @@ -54,7 +54,7 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); - mcr = ctrl_inl(SH7751_MCR); + mcr = __raw_readl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; pci_write_reg(chan, mcr, SH4_PCIMCR); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 250b0ed..0930f98 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -31,22 +31,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return sdk7780_irq_tab[pin-1][slot]; } -int pci_fixup_pcic(struct pci_channel *chan) -{ - /* Enable all interrupts, so we know what to fix */ - pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); - - /* Set up standard PCI config registers */ - pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */ - pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */ - - pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); - pci_write_reg(chan, 0x00000000, SH4_PCILAR1); - pci_write_reg(chan, 0x00000000, SH4_PCILSR1); - - pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); - pci_write_reg(chan, 0xA5000C01, SH4_PCICR); - - return 0; -} diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c index 475fa9f..a4c7d3a 100644 --- a/arch/sh/drivers/pci/fixups-se7751.c +++ b/arch/sh/drivers/pci/fixups-se7751.c @@ -97,12 +97,12 @@ int pci_fixup_pcic(struct pci_channel *chan) * meaning all calls go straight through... use BUG_ON to * catch erroneous assumption. */ - BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE); + BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE); - PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start); + PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start); /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK)); + PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK)); /* All done, may as well say so... */ printk("SH7751 PCI: Finished initialization of the PCI controller\n"); diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 78bebeb..0b81999 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -16,7 +16,7 @@ * Direct access to PCI hardware... */ #define CONFIG_CMD(bus, devfn, where) \ - (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3)) + (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) static DEFINE_SPINLOCK(sh4_pci_lock); @@ -102,34 +102,6 @@ struct pci_ops sh4_pci_ops = { .write = sh4_pci_write, }; -/* - * Not really related to pci_ops, but it's common and not worth shoving - * somewhere else for now.. - */ -int __init sh4_pci_check_direct(struct pci_channel *chan) -{ - /* - * Check if configuration works. - */ - unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - - pci_write_reg(chan, P1SEG, SH4_PCIPAR); - - if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { - pci_write_reg(chan, tmp, SH4_PCIPAR); - printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(chan->reg_base + SH4_PCIPAR, 8, - "PCI conf1"); - return 0; - } - - pci_write_reg(chan, tmp, SH4_PCIPAR); - - printk(KERN_ERR "PCI: %s failed\n", __func__); - - return -EINVAL; -} - int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c index 210f9d4..6336941 100644 --- a/arch/sh/drivers/pci/pci-dreamcast.c +++ b/arch/sh/drivers/pci/pci-dreamcast.c @@ -25,25 +25,25 @@ #include <asm/irq.h> #include <mach/pci.h> -static struct resource gapspci_io_resource = { - .name = "GAPSPCI IO", - .start = GAPSPCI_BBA_CONFIG, - .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource gapspci_mem_resource = { - .name = "GAPSPCI mem", - .start = GAPSPCI_DMA_BASE, - .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, - .flags = IORESOURCE_MEM, +static struct resource gapspci_resources[] = { + { + .name = "GAPSPCI IO", + .start = GAPSPCI_BBA_CONFIG, + .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, + .flags = IORESOURCE_IO, + }, { + .name = "GAPSPCI mem", + .start = GAPSPCI_DMA_BASE, + .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, + .flags = IORESOURCE_MEM, + }, }; static struct pci_channel dreamcast_pci_controller = { .pci_ops = &gapspci_pci_ops, - .io_resource = &gapspci_io_resource, + .resources = gapspci_resources, + .nr_resources = ARRAY_SIZE(gapspci_resources), .io_offset = 0x00000000, - .mem_resource = &gapspci_mem_resource, .mem_offset = 0x00000000, }; @@ -95,8 +95,6 @@ static int __init gapspci_init(void) outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); - register_pci_controller(&dreamcast_pci_controller); - - return 0; + return register_pci_controller(&dreamcast_pci_controller); } arch_initcall(gapspci_init); diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 3d5296c..cbf763b 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -49,6 +49,17 @@ #define SH4_PCIINT_MWPD 0x00000002 /* Master Write PERR Detect */ #define SH4_PCIINT_MRPD 0x00000001 /* Master Read PERR Detect */ #define SH4_PCIINTM 0x118 /* PCI Interrupt Mask */ + #define SH4_PCIINTM_TTADIM BIT(14) /* Target-target abort interrupt */ + #define SH4_PCIINTM_TMTOIM BIT(9) /* Target retry timeout */ + #define SH4_PCIINTM_MDEIM BIT(8) /* Master function disable error */ + #define SH4_PCIINTM_APEDIM BIT(7) /* Address parity error detection */ + #define SH4_PCIINTM_SDIM BIT(6) /* SERR detection */ + #define SH4_PCIINTM_DPEITWM BIT(5) /* Data parity error for target write */ + #define SH4_PCIINTM_PEDITRM BIT(4) /* PERR detection for target read */ + #define SH4_PCIINTM_TADIMM BIT(3) /* Target abort for master */ + #define SH4_PCIINTM_MADIMM BIT(2) /* Master abort for master */ + #define SH4_PCIINTM_MWPDIM BIT(1) /* Master write data parity error */ + #define SH4_PCIINTM_MRDPEIM BIT(0) /* Master read data parity error */ #define SH4_PCIALR 0x11C /* Error Address Register */ #define SH4_PCICLR 0x120 /* Error Command/Data */ #define SH4_PCICLR_MPIO 0x80000000 @@ -61,7 +72,7 @@ #define SH4_PCIAINT 0x130 /* Arbiter Interrupt Register */ #define SH4_PCIAINT_MBKN 0x00002000 /* Master Broken Interrupt */ #define SH4_PCIAINT_TBTO 0x00001000 /* Target Bus Time Out */ - #define SH4_PCIAINT_MBTO 0x00001000 /* Master Bus Time Out */ + #define SH4_PCIAINT_MBTO 0x00000800 /* Master Bus Time Out */ #define SH4_PCIAINT_TABT 0x00000008 /* Target Abort */ #define SH4_PCIAINT_MABT 0x00000004 /* Master Abort */ #define SH4_PCIAINT_RDPE 0x00000002 /* Read Data Parity Error */ @@ -151,7 +162,6 @@ /* arch/sh/kernel/drivers/pci/ops-sh4.c */ extern struct pci_ops sh4_pci_ops; -int sh4_pci_check_direct(struct pci_channel *chan); int pci_fixup_pcic(struct pci_channel *chan); struct sh4_pci_address_space { @@ -167,13 +177,13 @@ struct sh4_pci_address_map { static inline void pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg) { - ctrl_outl(val, chan->reg_base + reg); + __raw_writel(val, chan->reg_base + reg); } static inline unsigned long pci_read_reg(struct pci_channel *chan, unsigned long reg) { - return ctrl_inl(chan->reg_base + reg); + return __raw_readl(chan->reg_base + reg); } #endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 873ed2b..0bf296c 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -89,14 +89,13 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) return IRQ_NONE; } -static struct resource sh5_io_resource = { /* place holder */ }; -static struct resource sh5_mem_resource = { /* place holder */ }; +static struct resource sh5_pci_resources[2]; static struct pci_channel sh5pci_controller = { .pci_ops = &sh5_pci_ops, - .mem_resource = &sh5_mem_resource, + .resources = sh5_pci_resources, + .nr_resources = ARRAY_SIZE(sh5_pci_resources), .mem_offset = 0x00000000, - .io_resource = &sh5_io_resource, .io_offset = 0x00000000, }; @@ -210,14 +209,12 @@ static int __init sh5pci_init(void) SH5PCI_WRITE(AINTM, ~0); SH5PCI_WRITE(PINTM, ~0); - sh5_io_resource.start = PCI_IO_AREA; - sh5_io_resource.end = PCI_IO_AREA + 0x10000; + sh5_pci_resources[0].start = PCI_IO_AREA; + sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000; - sh5_mem_resource.start = memStart; - sh5_mem_resource.end = memStart + memSize; + sh5_pci_resources[1].start = memStart; + sh5_pci_resources[1].end = memStart + memSize; - register_pci_controller(&sh5pci_controller); - - return 0; + return register_pci_controller(&sh5pci_controller); } arch_initcall(sh5pci_init); diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index f277628..3f01dec 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -86,14 +86,14 @@ extern unsigned long pcicr_virt; /* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ /* Write I/O functions */ -#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg)) -#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg)) -#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg)) /* Read I/O functions */ -#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg)) -#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg)) -#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg)) /* Set PCI config bits */ #define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000) diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 70c1999..17811e5 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -44,25 +44,25 @@ static int __init __area_sdram_check(struct pci_channel *chan, return 1; } -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM +static struct resource sh7751_pci_resources[] = { + { + .name = "SH7751_IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO + }, { + .name = "SH7751_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM + }, }; static struct pci_channel sh7751_pci_controller = { .pci_ops = &sh4_pci_ops, - .mem_resource = &sh7751_mem_resource, + .resources = sh7751_pci_resources, + .nr_resources = ARRAY_SIZE(sh7751_pci_resources), .mem_offset = 0x00000000, - .io_resource = &sh7751_io_resource, .io_offset = 0x00000000, .io_map_base = SH7751_PCI_IO_BASE, }; @@ -79,7 +79,6 @@ static int __init sh7751_pci_init(void) struct pci_channel *chan = &sh7751_pci_controller; unsigned int id; u32 word, reg; - int ret; printk(KERN_NOTICE "PCI: Starting intialization.\n"); @@ -93,13 +92,10 @@ static int __init sh7751_pci_init(void) return -ENODEV; } - if ((ret = sh4_pci_check_direct(chan)) != 0) - return ret; - /* Set the BCR's to enable PCI access */ - reg = ctrl_inl(SH7751_BCR1); + reg = __raw_readl(SH7751_BCR1); reg |= 0x80000; - ctrl_outl(reg, SH7751_BCR1); + __raw_writel(reg, SH7751_BCR1); /* Turn the clocks back on (not done in reset)*/ pci_write_reg(chan, 0, SH4_PCICLKR); @@ -132,13 +128,13 @@ static int __init sh7751_pci_init(void) /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ - word = chan->mem_resource->start & SH4_PCIMBR_MASK; + word = chan->resources[1].start & SH4_PCIMBR_MASK; pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); pci_write_reg(chan, word , SH4_PCIMBR); /* Make sure the MSB's of IO window are set to access PCI space * correctly */ - word = chan->io_resource->start & SH4_PCIIOBR_MASK; + word = chan->resources[0].start & SH4_PCIIOBR_MASK; pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); pci_write_reg(chan, word, SH4_PCIIOBR); @@ -159,13 +155,13 @@ static int __init sh7751_pci_init(void) return -1; /* configure the wait control registers */ - word = ctrl_inl(SH7751_WCR1); + word = __raw_readl(SH7751_WCR1); pci_write_reg(chan, word, SH4_PCIWCR1); - word = ctrl_inl(SH7751_WCR2); + word = __raw_readl(SH7751_WCR2); pci_write_reg(chan, word, SH4_PCIWCR2); - word = ctrl_inl(SH7751_WCR3); + word = __raw_readl(SH7751_WCR3); pci_write_reg(chan, word, SH4_PCIWCR3); - word = ctrl_inl(SH7751_MCR); + word = __raw_readl(SH7751_MCR); pci_write_reg(chan, word, SH4_PCIMCR); /* NOTE: I'm ignoring the PCI error IRQs for now.. @@ -180,8 +176,6 @@ static int __init sh7751_pci_init(void) word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; pci_write_reg(chan, word, SH4_PCICR); - register_pci_controller(chan); - - return 0; + return register_pci_controller(chan); } arch_initcall(sh7751_pci_init); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 323b92d..ffdcbf1 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -1,7 +1,7 @@ /* * Low-Level PCI Support for the SH7780 * - * Copyright (C) 2005 - 2009 Paul Mundt + * Copyright (C) 2005 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -11,52 +11,240 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/timer.h> +#include <linux/irq.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/log2.h> #include "pci-sh4.h" +#include <asm/mmu.h> +#include <asm/sizes.h> -static struct resource sh7785_io_resource = { - .name = "SH7785_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7785_mem_resource = { - .name = "SH7785_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM +static struct resource sh7785_pci_resources[] = { + { + .name = "PCI IO", + .start = 0x1000, + .end = SZ_4M - 1, + .flags = IORESOURCE_IO, + }, { + .name = "PCI MEM 0", + .start = 0xfd000000, + .end = 0xfd000000 + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "PCI MEM 1", + .start = 0x10000000, + .end = 0x10000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, { + /* + * 32-bit only resources must be last. + */ + .name = "PCI MEM 2", + .start = 0xc0000000, + .end = 0xc0000000 + SZ_512M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, }; static struct pci_channel sh7780_pci_controller = { .pci_ops = &sh4_pci_ops, - .mem_resource = &sh7785_mem_resource, - .mem_offset = 0x00000000, - .io_resource = &sh7785_io_resource, - .io_offset = 0x00000000, - .io_map_base = SH7780_PCI_IO_BASE, + .resources = sh7785_pci_resources, + .nr_resources = ARRAY_SIZE(sh7785_pci_resources), + .io_offset = 0, + .mem_offset = 0, + .io_map_base = 0xfe200000, + .serr_irq = evt2irq(0xa00), + .err_irq = evt2irq(0xaa0), }; -static struct sh4_pci_address_map sh7780_pci_map = { - .window0 = { -#if defined(CONFIG_32BIT) - .base = SH7780_32BIT_DDR_BASE_ADDR, - .size = 0x40000000, -#else - .base = SH7780_CS0_BASE_ADDR, - .size = 0x20000000, -#endif - }, +struct pci_errors { + unsigned int mask; + const char *str; +} pci_arbiter_errors[] = { + { SH4_PCIAINT_MBKN, "master broken" }, + { SH4_PCIAINT_TBTO, "target bus time out" }, + { SH4_PCIAINT_MBTO, "master bus time out" }, + { SH4_PCIAINT_TABT, "target abort" }, + { SH4_PCIAINT_MABT, "master abort" }, + { SH4_PCIAINT_RDPE, "read data parity error" }, + { SH4_PCIAINT_WDPE, "write data parity error" }, +}, pci_interrupt_errors[] = { + { SH4_PCIINT_MLCK, "master lock error" }, + { SH4_PCIINT_TABT, "target-target abort" }, + { SH4_PCIINT_TRET, "target retry time out" }, + { SH4_PCIINT_MFDE, "master function disable erorr" }, + { SH4_PCIINT_PRTY, "address parity error" }, + { SH4_PCIINT_SERR, "SERR" }, + { SH4_PCIINT_TWDP, "data parity error for target write" }, + { SH4_PCIINT_TRDP, "PERR detected for target read" }, + { SH4_PCIINT_MTABT, "target abort for master" }, + { SH4_PCIINT_MMABT, "master abort for master" }, + { SH4_PCIINT_MWPD, "master write data parity error" }, + { SH4_PCIINT_MRPD, "master read data parity error" }, }; +static irqreturn_t sh7780_pci_err_irq(int irq, void *dev_id) +{ + struct pci_channel *hose = dev_id; + unsigned long addr; + unsigned int status; + unsigned int cmd; + int i; + + addr = __raw_readl(hose->reg_base + SH4_PCIALR); + + /* + * Handle status errors. + */ + status = __raw_readw(hose->reg_base + PCI_STATUS); + if (status & (PCI_STATUS_PARITY | + PCI_STATUS_DETECTED_PARITY | + PCI_STATUS_SIG_TARGET_ABORT | + PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_REC_MASTER_ABORT)) { + cmd = pcibios_handle_status_errors(addr, status, hose); + if (likely(cmd)) + __raw_writew(cmd, hose->reg_base + PCI_STATUS); + } + + /* + * Handle arbiter errors. + */ + status = __raw_readl(hose->reg_base + SH4_PCIAINT); + for (i = cmd = 0; i < ARRAY_SIZE(pci_arbiter_errors); i++) { + if (status & pci_arbiter_errors[i].mask) { + printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", + pci_arbiter_errors[i].str, addr); + cmd |= pci_arbiter_errors[i].mask; + } + } + __raw_writel(cmd, hose->reg_base + SH4_PCIAINT); + + /* + * Handle the remaining PCI errors. + */ + status = __raw_readl(hose->reg_base + SH4_PCIINT); + for (i = cmd = 0; i < ARRAY_SIZE(pci_interrupt_errors); i++) { + if (status & pci_interrupt_errors[i].mask) { + printk(KERN_DEBUG "PCI: %s, addr=%08lx\n", + pci_interrupt_errors[i].str, addr); + cmd |= pci_interrupt_errors[i].mask; + } + } + __raw_writel(cmd, hose->reg_base + SH4_PCIINT); + + return IRQ_HANDLED; +} + +static irqreturn_t sh7780_pci_serr_irq(int irq, void *dev_id) +{ + struct pci_channel *hose = dev_id; + + printk(KERN_DEBUG "PCI: system error received: "); + pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1); + printk("\n"); + + /* Deassert SERR */ + __raw_writel(SH4_PCIINTM_SDIM, hose->reg_base + SH4_PCIINTM); + + /* Back off the IRQ for awhile */ + disable_irq_nosync(irq); + hose->serr_timer.expires = jiffies + HZ; + add_timer(&hose->serr_timer); + + return IRQ_HANDLED; +} + +static int __init sh7780_pci_setup_irqs(struct pci_channel *hose) +{ + int ret; + + /* Clear out PCI arbiter IRQs */ + __raw_writel(0, hose->reg_base + SH4_PCIAINT); + + /* Clear all error conditions */ + __raw_writew(PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_SIG_SYSTEM_ERROR | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_SIG_TARGET_ABORT | \ + PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS); + + ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED, + "PCI SERR interrupt", hose); + if (unlikely(ret)) { + printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n"); + return ret; + } + + /* + * The PCI ERR IRQ needs to be IRQF_SHARED since all of the power + * down IRQ vectors are routed through the ERR IRQ vector. We + * only request_irq() once as there is only a single masking + * source for multiple events. + */ + ret = request_irq(hose->err_irq, sh7780_pci_err_irq, IRQF_SHARED, + "PCI ERR interrupt", hose); + if (unlikely(ret)) { + free_irq(hose->serr_irq, hose); + return ret; + } + + /* Unmask all of the arbiter IRQs. */ + __raw_writel(SH4_PCIAINT_MBKN | SH4_PCIAINT_TBTO | SH4_PCIAINT_MBTO | \ + SH4_PCIAINT_TABT | SH4_PCIAINT_MABT | SH4_PCIAINT_RDPE | \ + SH4_PCIAINT_WDPE, hose->reg_base + SH4_PCIAINTM); + + /* Unmask all of the PCI IRQs */ + __raw_writel(SH4_PCIINTM_TTADIM | SH4_PCIINTM_TMTOIM | \ + SH4_PCIINTM_MDEIM | SH4_PCIINTM_APEDIM | \ + SH4_PCIINTM_SDIM | SH4_PCIINTM_DPEITWM | \ + SH4_PCIINTM_PEDITRM | SH4_PCIINTM_TADIMM | \ + SH4_PCIINTM_MADIMM | SH4_PCIINTM_MWPDIM | \ + SH4_PCIINTM_MRDPEIM, hose->reg_base + SH4_PCIINTM); + + return ret; +} + +static inline void __init sh7780_pci_teardown_irqs(struct pci_channel *hose) +{ + free_irq(hose->err_irq, hose); + free_irq(hose->serr_irq, hose); +} + +static void __init sh7780_pci66_init(struct pci_channel *hose) +{ + unsigned int tmp; + + if (!pci_is_66mhz_capable(hose, 0, 0)) + return; + + /* Enable register access */ + tmp = __raw_readl(hose->reg_base + SH4_PCICR); + tmp |= SH4_PCICR_PREFIX; + __raw_writel(tmp, hose->reg_base + SH4_PCICR); + + /* Enable 66MHz operation */ + tmp = __raw_readw(hose->reg_base + PCI_STATUS); + tmp |= PCI_STATUS_66MHZ; + __raw_writew(tmp, hose->reg_base + PCI_STATUS); + + /* Done */ + tmp = __raw_readl(hose->reg_base + SH4_PCICR); + tmp |= SH4_PCICR_PREFIX | SH4_PCICR_CFIN; + __raw_writel(tmp, hose->reg_base + SH4_PCICR); +} + static int __init sh7780_pci_init(void) { struct pci_channel *chan = &sh7780_pci_controller; + phys_addr_t memphys; + size_t memsize; unsigned int id; - const char *type = NULL; - int ret; - u32 word; + const char *type; + int ret, i; printk(KERN_NOTICE "PCI: Starting intialization.\n"); @@ -65,17 +253,28 @@ static int __init sh7780_pci_init(void) /* Enable CPU access to the PCIC registers. */ __raw_writel(PCIECR_ENBL, PCIECR); - id = __raw_readw(chan->reg_base + SH7780_PCIVID); - if (id != SH7780_VENDOR_ID) { + /* Reset */ + __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_PRST, + chan->reg_base + SH4_PCICR); + + /* + * Wait for it to come back up. The spec says to allow for up to + * 1 second after toggling the reset pin, but in practice 100ms + * is more than enough. + */ + mdelay(100); + + id = __raw_readw(chan->reg_base + PCI_VENDOR_ID); + if (id != PCI_VENDOR_ID_RENESAS) { printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); return -ENODEV; } - id = __raw_readw(chan->reg_base + SH7780_PCIDID); - type = (id == SH7763_DEVICE_ID) ? "SH7763" : - (id == SH7780_DEVICE_ID) ? "SH7780" : - (id == SH7781_DEVICE_ID) ? "SH7781" : - (id == SH7785_DEVICE_ID) ? "SH7785" : + id = __raw_readw(chan->reg_base + PCI_DEVICE_ID); + type = (id == PCI_DEVICE_ID_RENESAS_SH7763) ? "SH7763" : + (id == PCI_DEVICE_ID_RENESAS_SH7780) ? "SH7780" : + (id == PCI_DEVICE_ID_RENESAS_SH7781) ? "SH7781" : + (id == PCI_DEVICE_ID_RENESAS_SH7785) ? "SH7785" : NULL; if (unlikely(!type)) { printk(KERN_ERR "PCI: Found an unsupported Renesas host " @@ -85,62 +284,119 @@ static int __init sh7780_pci_init(void) printk(KERN_NOTICE "PCI: Found a Renesas %s host " "controller, revision %d.\n", type, - __raw_readb(chan->reg_base + SH7780_PCIRID)); + __raw_readb(chan->reg_base + PCI_REVISION_ID)); - if ((ret = sh4_pci_check_direct(chan)) != 0) + /* + * Now throw it in to register initialization mode and + * start the real work. + */ + __raw_writel(SH4_PCICR_PREFIX, chan->reg_base + SH4_PCICR); + + memphys = __pa(memory_start); + memsize = roundup_pow_of_two(memory_end - memory_start); + + /* + * If there's more than 512MB of memory, we need to roll over to + * LAR1/LSR1. + */ + if (memsize > SZ_512M) { + __raw_writel(memphys + SZ_512M, chan->reg_base + SH4_PCILAR1); + __raw_writel((((memsize - SZ_512M) - SZ_1M) & 0x1ff00000) | 1, + chan->reg_base + SH4_PCILSR1); + memsize = SZ_512M; + } else { + /* + * Otherwise just zero it out and disable it. + */ + __raw_writel(0, chan->reg_base + SH4_PCILAR1); + __raw_writel(0, chan->reg_base + SH4_PCILSR1); + } + + /* + * LAR0/LSR0 covers up to the first 512MB, which is enough to + * cover all of lowmem on most platforms. + */ + __raw_writel(memphys, chan->reg_base + SH4_PCILAR0); + __raw_writel(((memsize - SZ_1M) & 0x1ff00000) | 1, + chan->reg_base + SH4_PCILSR0); + + /* + * Hook up the ERR and SERR IRQs. + */ + ret = sh7780_pci_setup_irqs(chan); + if (unlikely(ret)) return ret; /* - * Set the class and sub-class codes. + * Disable the cache snoop controller for non-coherent DMA. */ - __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, - chan->reg_base + SH7780_PCIBCC); - __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, - chan->reg_base + SH7780_PCISUB); + __raw_writel(0, chan->reg_base + SH7780_PCICSCR0); + __raw_writel(0, chan->reg_base + SH7780_PCICSAR0); + __raw_writel(0, chan->reg_base + SH7780_PCICSCR1); + __raw_writel(0, chan->reg_base + SH7780_PCICSAR1); /* - * Set IO and Mem windows to local address - * Make PCI and local address the same for easy 1 to 1 mapping + * Setup the memory BARs */ - pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); - /* Set the values on window 0 PCI config registers */ - pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); - pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); + for (i = 1; i < chan->nr_resources; i++) { + struct resource *res = chan->resources + i; + resource_size_t size; - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); + if (unlikely(res->flags & IORESOURCE_IO)) + continue; - /* Set up standard PCI config registers */ - __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS); - __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD); - __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID); - __raw_writew(0x0001, chan->reg_base + SH7780_PCISID); + /* + * Make sure we're in the right physical addressing mode + * for dealing with the resource. + */ + if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode()) { + chan->nr_resources--; + continue; + } - __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF); + size = resource_size(res); + + /* + * The MBMR mask is calculated in units of 256kB, which + * keeps things pretty simple. + */ + __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18, + chan->reg_base + SH7780_PCIMBMR(i - 1)); + __raw_writel(res->start, chan->reg_base + SH7780_PCIMBR(i - 1)); + } - /* Apply any last-minute PCIC fixups */ - pci_fixup_pcic(chan); + /* + * And I/O. + */ + __raw_writel(0, chan->reg_base + PCI_BASE_ADDRESS_0); + __raw_writel(0, chan->reg_base + SH7780_PCIIOBR); + __raw_writel(0, chan->reg_base + SH7780_PCIIOBMR); - pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); - pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); + __raw_writew(PCI_COMMAND_SERR | PCI_COMMAND_WAIT | \ + PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | \ + PCI_COMMAND_MEMORY, chan->reg_base + PCI_COMMAND); -#ifdef CONFIG_32BIT - pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); - pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); -#endif + /* + * Initialization mode complete, release the control register and + * enable round robin mode to stop device overruns/starvation. + */ + __raw_writel(SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO, + chan->reg_base + SH4_PCICR); - /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), - SH7780_PCIIOBMR); + ret = register_pci_controller(chan); + if (unlikely(ret)) + goto err; - /* SH7780 init done, set central function init complete */ - /* use round robin mode to stop a device starving/overruning */ - word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; - pci_write_reg(chan, word, SH4_PCICR); + sh7780_pci66_init(chan); - register_pci_controller(chan); + printk(KERN_NOTICE "PCI: Running at %dMHz.\n", + (__raw_readw(chan->reg_base + PCI_STATUS) & PCI_STATUS_66MHZ) ? + 66 : 33); return 0; + +err: + sh7780_pci_teardown_irqs(chan); + return ret; } arch_initcall(sh7780_pci_init); diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 4a52478..205dcbe 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -12,12 +12,11 @@ #ifndef _PCI_SH7780_H_ #define _PCI_SH7780_H_ -/* Platform Specific Values */ -#define SH7780_VENDOR_ID 0x1912 -#define SH7781_DEVICE_ID 0x0001 -#define SH7780_DEVICE_ID 0x0002 -#define SH7763_DEVICE_ID 0x0004 -#define SH7785_DEVICE_ID 0x0007 +#define PCI_VENDOR_ID_RENESAS 0x1912 +#define PCI_DEVICE_ID_RENESAS_SH7781 0x0001 +#define PCI_DEVICE_ID_RENESAS_SH7780 0x0002 +#define PCI_DEVICE_ID_RENESAS_SH7763 0x0004 +#define PCI_DEVICE_ID_RENESAS_SH7785 0x0007 /* SH7780 Control Registers */ #define PCIECR 0xFE000008 @@ -27,44 +26,9 @@ #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ #define SH7780_PCI_CONFIG_SIZE 0x01000000 /* Config space size */ -#define SH7780_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */ -#define SH7780_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ - -#define SH7780_PCI_IO_BASE 0xFE200000 /* IO space base address */ -#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ - #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ /* SH7780 PCI Config Registers */ -#define SH7780_PCIVID 0x000 /* Vendor ID */ -#define SH7780_PCIDID 0x002 /* Device ID */ -#define SH7780_PCICMD 0x004 /* Command */ -#define SH7780_PCISTATUS 0x006 /* Status */ -#define SH7780_PCIRID 0x008 /* Revision ID */ -#define SH7780_PCIPIF 0x009 /* Program Interface */ -#define SH7780_PCISUB 0x00a /* Sub class code */ -#define SH7780_PCIBCC 0x00b /* Base class code */ -#define SH7780_PCICLS 0x00c /* Cache line size */ -#define SH7780_PCILTM 0x00d /* latency timer */ -#define SH7780_PCIHDR 0x00e /* Header type */ -#define SH7780_PCIBIST 0x00f /* BIST */ -#define SH7780_PCIIBAR 0x010 /* IO Base address */ -#define SH7780_PCIMBAR0 0x014 /* Memory base address0 */ -#define SH7780_PCIMBAR1 0x018 /* Memory base address1 */ -#define SH7780_PCISVID 0x02c /* Sub system vendor ID */ -#define SH7780_PCISID 0x02e /* Sub system ID */ -#define SH7780_PCICP 0x034 -#define SH7780_PCIINTLINE 0x03c /* Interrupt line */ -#define SH7780_PCIINTPIN 0x03d /* Interrupt pin */ -#define SH7780_PCIMINGNT 0x03e /* Minumum grand */ -#define SH7780_PCIMAXLAT 0x03f /* Maxmum latency */ -#define SH7780_PCICID 0x040 -#define SH7780_PCINIP 0x041 -#define SH7780_PCIPMC 0x042 -#define SH7780_PCIPMCSR 0x044 -#define SH7780_PCIPMCSR_BSE 0x046 -#define SH7780_PCICDD 0x047 - #define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ #define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ #define SH7780_PCIAIR 0x11C /* Error Address Register */ @@ -76,10 +40,8 @@ #define SH7780_PCIPINT 0x1CC /* Power Mgmnt Int. Register */ #define SH7780_PCIPINTM 0x1D0 /* Power Mgmnt Mask Register */ -#define SH7780_PCIMBR0 0x1E0 -#define SH7780_PCIMBMR0 0x1E4 -#define SH7780_PCIMBR2 0x1F0 -#define SH7780_PCIMBMR2 0x1F4 +#define SH7780_PCIMBR(x) (0x1E0 + ((x) * 8)) +#define SH7780_PCIMBMR(x) (0x1E4 + ((x) * 8)) #define SH7780_PCIIOBR 0x1F8 #define SH7780_PCIIOBMR 0x1FC #define SH7780_PCICSCR0 0x210 /* Cache Snoop1 Cnt. Register */ @@ -87,16 +49,4 @@ #define SH7780_PCICSAR0 0x218 /* Cache Snoop1 Addr. Register */ #define SH7780_PCICSAR1 0x21C /* Cache Snoop2 Addr. Register */ -/* General Memory Config Addresses */ -#define SH7780_CS0_BASE_ADDR 0x0 -#define SH7780_MEM_REGION_SIZE 0x04000000 -#define SH7780_CS1_BASE_ADDR (SH7780_CS0_BASE_ADDR + SH7780_MEM_REGION_SIZE) -#define SH7780_CS2_BASE_ADDR (SH7780_CS1_BASE_ADDR + SH7780_MEM_REGION_SIZE) -#define SH7780_CS3_BASE_ADDR (SH7780_CS2_BASE_ADDR + SH7780_MEM_REGION_SIZE) -#define SH7780_CS4_BASE_ADDR (SH7780_CS3_BASE_ADDR + SH7780_MEM_REGION_SIZE) -#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE) -#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE) - -#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 - #endif /* _PCI_SH7780_H_ */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 96213fd..953af13 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -33,15 +33,22 @@ static int pci_initialized; static void __devinit pcibios_scanbus(struct pci_channel *hose) { static int next_busno; + static int need_domain_info; struct pci_bus *bus; bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + hose->bus = bus; + + need_domain_info = need_domain_info || hose->index; + hose->need_domain_info = need_domain_info; if (bus) { next_busno = bus->subordinate + 1; /* Don't allow 8-bit bus number overflow inside the hose - reserve some space for bridges. */ - if (next_busno > 224) + if (next_busno > 224) { next_busno = 0; + need_domain_info = 1; + } pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); @@ -51,10 +58,21 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose) static DEFINE_MUTEX(pci_scan_mutex); -void __devinit register_pci_controller(struct pci_channel *hose) +int __devinit register_pci_controller(struct pci_channel *hose) { - request_resource(&iomem_resource, hose->mem_resource); - request_resource(&ioport_resource, hose->io_resource); + int i; + + for (i = 0; i < hose->nr_resources; i++) { + struct resource *res = hose->resources + i; + + if (res->flags & IORESOURCE_IO) { + if (request_resource(&ioport_resource, res) < 0) + goto out; + } else { + if (request_resource(&iomem_resource, res) < 0) + goto out; + } + } *hose_tail = hose; hose_tail = &hose->next; @@ -68,6 +86,11 @@ void __devinit register_pci_controller(struct pci_channel *hose) } /* + * Setup the ERR/PERR and SERR timers, if available. + */ + pcibios_enable_timers(hose); + + /* * Scan the bus if it is register after the PCI subsystem * initialization. */ @@ -76,6 +99,15 @@ void __devinit register_pci_controller(struct pci_channel *hose) pcibios_scanbus(hose); mutex_unlock(&pci_scan_mutex); } + + return 0; + +out: + for (--i; i >= 0; i--) + release_resource(&hose->resources[i]); + + printk(KERN_WARNING "Skipping PCI bus scan due to resource conflict\n"); + return -1; } static int __init pcibios_init(void) @@ -127,11 +159,13 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; struct list_head *ln; - struct pci_channel *chan = bus->sysdata; + struct pci_channel *hose = bus->sysdata; if (!dev) { - bus->resource[0] = chan->io_resource; - bus->resource[1] = chan->mem_resource; + int i; + + for (i = 0; i < hose->nr_resources; i++) + bus->resource[i] = hose->resources + i; } for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { @@ -152,30 +186,25 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; - struct pci_channel *chan = dev->sysdata; + struct pci_channel *hose = dev->sysdata; resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - if (start < PCIBIOS_MIN_IO + chan->io_resource->start) - start = PCIBIOS_MIN_IO + chan->io_resource->start; + if (start < PCIBIOS_MIN_IO + hose->resources[0].start) + start = PCIBIOS_MIN_IO + hose->resources[0].start; /* * Put everything into 0x00-0xff region modulo 0x400. */ - if (start & 0x300) { + if (start & 0x300) start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } else if (res->flags & IORESOURCE_MEM) { - if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) - start = PCIBIOS_MIN_MEM + chan->mem_resource->start; } return start; } void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) + struct resource *res) { struct pci_channel *hose = dev->sysdata; unsigned long offset = 0; @@ -189,9 +218,8 @@ void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->end = res->end - offset; } -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) { struct pci_channel *hose = dev->sysdata; unsigned long offset = 0; @@ -274,6 +302,86 @@ char * __devinit pcibios_setup(char *str) return str; } +static void __init +pcibios_bus_report_status_early(struct pci_channel *hose, + int top_bus, int current_bus, + unsigned int status_mask, int warn) +{ + unsigned int pci_devfn; + u16 status; + int ret; + + for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { + if (PCI_FUNC(pci_devfn)) + continue; + ret = early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_STATUS, &status); + if (ret != PCIBIOS_SUCCESSFUL) + continue; + if (status == 0xffff) + continue; + + early_write_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_STATUS, + status & status_mask); + if (warn) + printk("(%02x:%02x: %04X) ", current_bus, + pci_devfn, status); + } +} + +/* + * We can't use pci_find_device() here since we are + * called from interrupt context. + */ +static void __init_refok +pcibios_bus_report_status(struct pci_bus *bus, unsigned int status_mask, + int warn) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + u16 status; + + /* + * ignore host bridge - we handle + * that separately + */ + if (dev->bus->number == 0 && dev->devfn == 0) + continue; + + pci_read_config_word(dev, PCI_STATUS, &status); + if (status == 0xffff) + continue; + + if ((status & status_mask) == 0) + continue; + + /* clear the status errors */ + pci_write_config_word(dev, PCI_STATUS, status & status_mask); + + if (warn) + printk("(%s: %04X) ", pci_name(dev), status); + } + + list_for_each_entry(dev, &bus->devices, bus_list) + if (dev->subordinate) + pcibios_bus_report_status(dev->subordinate, status_mask, warn); +} + +void __init_refok pcibios_report_status(unsigned int status_mask, int warn) +{ + struct pci_channel *hose; + + for (hose = hose_head; hose; hose = hose->next) { + if (unlikely(!hose->bus)) + pcibios_bus_report_status_early(hose, hose_head->index, + hose->index, status_mask, warn); + else + pcibios_bus_report_status(hose->bus, status_mask, warn); + } +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { @@ -302,9 +410,15 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev, { struct pci_channel *chan = dev->sysdata; - if (!chan->io_map_base) + if (unlikely(!chan->io_map_base)) { chan->io_map_base = generic_io_base; + if (pci_domains_supported) + panic("To avoid data corruption io_map_base MUST be " + "set with multiple PCI domains."); + } + + return (void __iomem *)(chan->io_map_base + port); } @@ -321,20 +435,9 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) if (flags & IORESOURCE_IO) return ioport_map_pci(dev, start, len); - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ if (flags & IORESOURCE_MEM) { if (flags & IORESOURCE_CACHEABLE) return ioremap(start, len); - return ioremap_nocache(start, len); } diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index ac37ee8..ae91a2d 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -1,7 +1,7 @@ /* * Low-Level PCI Express Support for the SH7786 * - * Copyright (C) 2009 Paul Mundt + * Copyright (C) 2009 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -30,60 +30,84 @@ static struct sh7786_pcie_hwops { int (*port_init_hw)(struct sh7786_pcie_port *port); } *sh7786_pcie_hwops; -static struct resource sh7786_pci_32bit_mem_resources[] = { +static struct resource sh7786_pci0_resources[] = { { - .name = "pci0_mem", - .start = SH4A_PCIMEM_BASEA, - .end = SH4A_PCIMEM_BASEA + SZ_64M - 1, - .flags = IORESOURCE_MEM, + .name = "PCIe0 IO", + .start = 0xfd000000, + .end = 0xfd000000 + SZ_8M - 1, + .flags = IORESOURCE_IO, }, { - .name = "pci1_mem", - .start = SH4A_PCIMEM_BASEA1, - .end = SH4A_PCIMEM_BASEA1 + SZ_64M - 1, - .flags = IORESOURCE_MEM, + .name = "PCIe0 MEM 0", + .start = 0xc0000000, + .end = 0xc0000000 + SZ_512M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "pci2_mem", - .start = SH4A_PCIMEM_BASEA2, - .end = SH4A_PCIMEM_BASEA2 + SZ_64M - 1, + .name = "PCIe0 MEM 1", + .start = 0x10000000, + .end = 0x10000000 + SZ_64M - 1, .flags = IORESOURCE_MEM, + }, { + .name = "PCIe0 MEM 2", + .start = 0xfe100000, + .end = 0xfe100000 + SZ_1M - 1, }, }; -static struct resource sh7786_pci_29bit_mem_resource = { - .start = SH4A_PCIMEM_BASE, - .end = SH4A_PCIMEM_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, +static struct resource sh7786_pci1_resources[] = { + { + .name = "PCIe1 IO", + .start = 0xfd800000, + .end = 0xfd800000 + SZ_8M - 1, + .flags = IORESOURCE_IO, + }, { + .name = "PCIe1 MEM 0", + .start = 0xa0000000, + .end = 0xa0000000 + SZ_512M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, { + .name = "PCIe1 MEM 1", + .start = 0x30000000, + .end = 0x30000000 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, { + .name = "PCIe1 MEM 2", + .start = 0xfe300000, + .end = 0xfe300000 + SZ_1M - 1, + }, }; -static struct resource sh7786_pci_io_resources[] = { +static struct resource sh7786_pci2_resources[] = { { - .name = "pci0_io", - .start = SH4A_PCIIO_BASE, - .end = SH4A_PCIIO_BASE + SZ_8M - 1, - .flags = IORESOURCE_IO, + .name = "PCIe2 IO", + .start = 0xfc800000, + .end = 0xfc800000 + SZ_4M - 1, }, { - .name = "pci1_io", - .start = SH4A_PCIIO_BASE1, - .end = SH4A_PCIIO_BASE1 + SZ_8M - 1, - .flags = IORESOURCE_IO, + .name = "PCIe2 MEM 0", + .start = 0x80000000, + .end = 0x80000000 + SZ_512M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, }, { - .name = "pci2_io", - .start = SH4A_PCIIO_BASE2, - .end = SH4A_PCIIO_BASE2 + SZ_4M - 1, - .flags = IORESOURCE_IO, + .name = "PCIe2 MEM 1", + .start = 0x20000000, + .end = 0x20000000 + SZ_256M - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, + }, { + .name = "PCIe2 MEM 2", + .start = 0xfcd00000, + .end = 0xfcd00000 + SZ_1M - 1, }, }; extern struct pci_ops sh7786_pci_ops; -#define DEFINE_CONTROLLER(start, idx) \ -{ \ - .pci_ops = &sh7786_pci_ops, \ - .reg_base = start, \ - /* mem_resource filled in at probe time */ \ - .mem_offset = 0, \ - .io_resource = &sh7786_pci_io_resources[idx], \ - .io_offset = 0, \ +#define DEFINE_CONTROLLER(start, idx) \ +{ \ + .pci_ops = &sh7786_pci_ops, \ + .resources = sh7786_pci##idx##_resources, \ + .nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \ + .reg_base = start, \ + .mem_offset = 0, \ + .io_offset = 0, \ } static struct pci_channel sh7786_pci_channels[] = { @@ -180,7 +204,9 @@ static int pcie_init(struct sh7786_pcie_port *port) { struct pci_channel *chan = port->hose; unsigned int data; - int ret; + phys_addr_t memphys; + size_t memsize; + int ret, i; /* Begin initialization */ pci_write_reg(chan, 0, SH4A_PCIETCTLR); @@ -203,15 +229,24 @@ static int pcie_init(struct sh7786_pcie_port *port) data |= PCI_CAP_ID_EXP; pci_write_reg(chan, data, SH4A_PCIEEXPCAP0); - /* Enable x4 link width and extended sync. */ + /* Enable data link layer active state reporting */ + pci_write_reg(chan, PCI_EXP_LNKCAP_DLLLARC, SH4A_PCIEEXPCAP3); + + /* Enable extended sync and ASPM L0s support */ data = pci_read_reg(chan, SH4A_PCIEEXPCAP4); - data &= ~(PCI_EXP_LNKSTA_NLW << 16); - data |= (1 << 22) | PCI_EXP_LNKCTL_ES; + data &= ~PCI_EXP_LNKCTL_ASPMC; + data |= PCI_EXP_LNKCTL_ES | 1; pci_write_reg(chan, data, SH4A_PCIEEXPCAP4); + /* Write out the physical slot number */ + data = pci_read_reg(chan, SH4A_PCIEEXPCAP5); + data &= ~PCI_EXP_SLTCAP_PSN; + data |= (port->index + 1) << 19; + pci_write_reg(chan, data, SH4A_PCIEEXPCAP5); + /* Set the completion timer timeout to the maximum 32ms. */ data = pci_read_reg(chan, SH4A_PCIETLCTLR); - data &= ~0xffff; + data &= ~0x3f00; data |= 0x32 << 8; pci_write_reg(chan, data, SH4A_PCIETLCTLR); @@ -224,6 +259,33 @@ static int pcie_init(struct sh7786_pcie_port *port) data |= (0xff << 16); pci_write_reg(chan, data, SH4A_PCIEMACCTLR); + memphys = __pa(memory_start); + memsize = roundup_pow_of_two(memory_end - memory_start); + + /* + * If there's more than 512MB of memory, we need to roll over to + * LAR1/LAMR1. + */ + if (memsize > SZ_512M) { + __raw_writel(memphys + SZ_512M, chan->reg_base + SH4A_PCIELAR1); + __raw_writel(((memsize - SZ_512M) - SZ_256) | 1, + chan->reg_base + SH4A_PCIELAMR1); + memsize = SZ_512M; + } else { + /* + * Otherwise just zero it out and disable it. + */ + __raw_writel(0, chan->reg_base + SH4A_PCIELAR1); + __raw_writel(0, chan->reg_base + SH4A_PCIELAMR1); + } + + /* + * LAR0/LAMR0 covers up to the first 512MB, which is enough to + * cover all of lowmem on most platforms. + */ + __raw_writel(memphys, chan->reg_base + SH4A_PCIELAR0); + __raw_writel((memsize - SZ_256) | 1, chan->reg_base + SH4A_PCIELAMR0); + /* Finish initialization */ data = pci_read_reg(chan, SH4A_PCIETCTLR); data |= 0x1; @@ -243,10 +305,14 @@ static int pcie_init(struct sh7786_pcie_port *port) if (unlikely(ret != 0)) return -ENODEV; - pci_write_reg(chan, 0x00100007, SH4A_PCIEPCICONF1); + data = pci_read_reg(chan, SH4A_PCIEPCICONF1); + data &= ~(PCI_STATUS_DEVSEL_MASK << 16); + data |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + (PCI_STATUS_CAP_LIST | PCI_STATUS_DEVSEL_FAST) << 16; + pci_write_reg(chan, data, SH4A_PCIEPCICONF1); + pci_write_reg(chan, 0x80888000, SH4A_PCIETXVC0DCTLR); pci_write_reg(chan, 0x00222000, SH4A_PCIERXVC0DCTLR); - pci_write_reg(chan, 0x000050A0, SH4A_PCIEEXPCAP2); wmb(); @@ -254,15 +320,32 @@ static int pcie_init(struct sh7786_pcie_port *port) printk(KERN_NOTICE "PCI: PCIe#%d link width %d\n", port->index, (data >> 20) & 0x3f); - pci_write_reg(chan, 0x007c0000, SH4A_PCIEPAMR0); - pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH0); - pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL0); - pci_write_reg(chan, 0x80000100, SH4A_PCIEPTCTLR0); - pci_write_reg(chan, 0x03fc0000, SH4A_PCIEPAMR2); - pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH2); - pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL2); - pci_write_reg(chan, 0x80000000, SH4A_PCIEPTCTLR2); + for (i = 0; i < chan->nr_resources; i++) { + struct resource *res = chan->resources + i; + resource_size_t size; + u32 enable_mask; + + pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(i)); + + size = resource_size(res); + + /* + * The PAMR mask is calculated in units of 256kB, which + * keeps things pretty simple. + */ + __raw_writel(((roundup_pow_of_two(size) / SZ_256K) - 1) << 18, + chan->reg_base + SH4A_PCIEPAMR(i)); + + pci_write_reg(chan, 0x00000000, SH4A_PCIEPARH(i)); + pci_write_reg(chan, 0x00000000, SH4A_PCIEPARL(i)); + + enable_mask = MASK_PARE; + if (res->flags & IORESOURCE_IO) + enable_mask |= MASK_SPC; + + pci_write_reg(chan, enable_mask, SH4A_PCIEPTCTLR(i)); + } return 0; } @@ -296,9 +379,7 @@ static int __devinit sh7786_pcie_init_hw(struct sh7786_pcie_port *port) if (unlikely(ret < 0)) return ret; - register_pci_controller(port->hose); - - return 0; + return register_pci_controller(port->hose); } static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = { @@ -332,17 +413,7 @@ static int __init sh7786_pcie_init(void) port->index = i; port->hose = sh7786_pci_channels + i; - port->hose->io_map_base = port->hose->io_resource->start; - - /* - * Check if we are booting in 29 or 32-bit mode - * - * 32-bit mode provides each controller with its own - * memory window, while 29-bit mode uses a shared one. - */ - port->hose->mem_resource = test_mode_pin(MODE_PIN10) ? - &sh7786_pci_32bit_mem_resources[i] : - &sh7786_pci_29bit_mem_resource; + port->hose->io_map_base = port->hose->resources[0].start; ret |= sh7786_pcie_hwops->port_init_hw(port); } diff --git a/arch/sh/drivers/pci/pcie-sh7786.h b/arch/sh/drivers/pci/pcie-sh7786.h index c655290..90a6992 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.h +++ b/arch/sh/drivers/pci/pcie-sh7786.h @@ -30,47 +30,9 @@ * for other(Max Payload Size=4096B,PCIIO_SIZE=8M) */ -/* PCI0-0: PCI I/O space */ -#define SH4A_PCIIO_BASE 0xFD000000 /* PCI I/O for controller 0 */ -#define SH4A_PCIIO_BASE1 0xFD800000 /* PCI I/O for controller 1 (Rev1.14)*/ -#define SH4A_PCIIO_BASE2 0xFC800000 /* PCI I/O for controller 2 (Rev1.171)*/ - -#define SH4A_PCIIO_SIZE64 0x00010000 /* PLX allows only 64K */ -#define SH4A_PCIIO_SIZE 0x00800000 /* 8M */ -#define SH4A_PCIIO_SIZE2 0x00400000 /* 4M (Rev1.171)*/ - -/* PCI0-1: PCI memory space 29-bit address */ -#define SH4A_PCIMEM_BASE 0x10000000 -#define SH4A_PCIMEM_SIZE 0x04000000 /* 64M */ - -/* PCI0-2: PCI memory space 32-bit address */ -#define SH4A_PCIMEM_BASEA 0xC0000000 /* for controller 0 */ -#define SH4A_PCIMEM_BASEA1 0xA0000000 /* for controller 1 (Rev1.14)*/ -#define SH4A_PCIMEM_BASEA2 0x80000000 /* for controller 2 (Rev1.171)*/ -#define SH4A_PCIMEM_SIZEA 0x20000000 /* 512M */ - /* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/ #define SH4A_PCIBMSTR_TRANSLATION 0x20000000 -#define SH4A_PCI_DEVICE_ID 0x0002 -#define SH4A_PCI_VENDOR_ID 0x1912 - -// PCI compatible 000-03f -#define PCI_CMD 0x004 -#define PCI_RID 0x008 -#define PCI_IBAR 0x010 -#define PCI_MBAR0 0x014 -#define PCI_MBAR1 0x018 - -/* PCI power management/MSI/capablity 040-0ff */ -/* PCIE extended 100-fff */ - -/* SH7786 device identification */ // Rev1.171 -#define SH4A_PVR (0xFF000030) -#define SH4A_PVR_SHX3 (0x10400000) -#define SH4A_PRR (0xFF000044) -#define SH4A_PRR_SH7786 (0x00000400) // Rev1.171 - /* SPVCR0 */ #define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */ #define BITS_TOP_MB (24) @@ -350,23 +312,23 @@ #define SH4A_PCIECSAR5 (0x0202B4) /* R/W R/W 0x0000 0000 32 */ #define SH4A_PCIESTCTLR5 (0x0202B8) /* R/W R/W 0x0000 0000 32 */ -/* PCIEPARL0 */ -#define SH4A_PCIEPARL0 (0x020400) /* R/W R/W 0x0000 0000 32 */ +/* PCIEPARL */ +#define SH4A_PCIEPARL(x) (0x020400 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */ #define BITS_PAL (18) #define MASK_PAL (0x3fff<<BITS_PAL) -/* PCIEPARH0 */ -#define SH4A_PCIEPARH0 (0x020404) /* R/W R/W 0x0000 0000 32 */ +/* PCIEPARH */ +#define SH4A_PCIEPARH(x) (0x020404 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */ #define BITS_PAH (0) #define MASK_PAH (0xffffffff<<BITS_PAH) -/* PCIEPAMR0 */ -#define SH4A_PCIEPAMR0 (0x020408) /* R/W R/W 0x0000 0000 32 */ +/* PCIEPAMR */ +#define SH4A_PCIEPAMR(x) (0x020408 + ((x) * 0x20)) /* R/W R/W 0x0000 0000 32 */ #define BITS_PAM (18) #define MASK_PAM (0x3fff<<BITS_PAM) -/* PCIEPTCTLR0 */ -#define SH4A_PCIEPTCTLR0 (0x02040C) /* R/W R/W 0x0000 0000 32 */ +/* PCIEPTCTLR */ +#define SH4A_PCIEPTCTLR(x) (0x02040C + ((x) * 0x20)) #define BITS_PARE (31) #define MASK_PARE (0x1<<BITS_PARE) #define BITS_TC (20) @@ -378,26 +340,6 @@ #define BITS_SPC (8) #define MASK_SPC (0x1<<BITS_SPC) -#define SH4A_PCIEPARL1 (0x020420) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARH1 (0x020424) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPAMR1 (0x020428) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPTCTLR1 (0x02042C) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARL2 (0x020440) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARH2 (0x020444) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPAMR2 (0x020448) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPTCTLR2 (0x02044C) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARL3 (0x020460) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARH3 (0x020464) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPAMR3 (0x020468) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPTCTLR3 (0x02046C) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARL4 (0x020480) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARH4 (0x020484) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPAMR4 (0x020488) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPTCTLR4 (0x02048C) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARL5 (0x0204A0) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPARH5 (0x0204A4) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPAMR5 (0x0204A8) /* R/W R/W 0x0000 0000 32 */ -#define SH4A_PCIEPTCTLR5 (0x0204AC) /* R/W R/W 0x0000 0000 32 */ #define SH4A_PCIEDMAOR (0x021000) /* R/W R/W 0x0000 0000 32 */ #define SH4A_PCIEDMSAR0 (0x021100) /* R/W R/W 0x0000 0000 32 */ #define SH4A_PCIEDMSAHR0 (0x021104) /* R/W R/W 0x0000 0000 32 */ diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c index 3b14bf8..6da62e9 100644 --- a/arch/sh/drivers/superhyway/ops-sh4-202.c +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -134,8 +134,8 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) * * Do not trust the documentation, for it is evil. */ - vcrh = ctrl_inl(base); - vcrl = ctrl_inl(base + sizeof(u32)); + vcrh = __raw_readl(base); + vcrl = __raw_readl(base + sizeof(u32)); tmp = ((u64)vcrh << 32) | vcrl; memcpy(vcr, &tmp, sizeof(u64)); @@ -147,8 +147,8 @@ static int sh4202_write_vcr(unsigned long base, struct superhyway_vcr_info vcr) { u64 tmp = *(u64 *)&vcr; - ctrl_outl((tmp >> 32) & 0xffffffff, base); - ctrl_outl(tmp & 0xffffffff, base + sizeof(u32)); + __raw_writel((tmp >> 32) & 0xffffffff, base); + __raw_writel(tmp & 0xffffffff, base + sizeof(u32)); return 0; } |