summaryrefslogtreecommitdiffstats
path: root/arch/ppc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc')
-rw-r--r--arch/ppc/syslib/m8xx_setup.c50
1 files changed, 50 insertions, 0 deletions
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index ff02824..cdb73a2 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -34,6 +34,13 @@
#include <linux/seq_file.h>
#include <linux/root_dev.h>
+#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#endif
+
#include <asm/mmu.h>
#include <asm/reg.h>
#include <asm/residual.h>
@@ -49,6 +56,34 @@
#include "ppc8xx_pic.h"
+#ifdef CONFIG_MTD_PHYSMAP
+#define MPC8xxADS_BANK_WIDTH 4
+#endif
+
+#define MPC8xxADS_U_BOOT_SIZE 0x80000
+#define MPC8xxADS_FREE_AREA_OFFSET MPC8xxADS_U_BOOT_SIZE
+
+#if defined(CONFIG_MTD_PARTITIONS)
+ /*
+ NOTE: bank width and interleave relative to the installed flash
+ should have been chosen within MTD_CFI_GEOMETRY options.
+ */
+static struct mtd_partition mpc8xxads_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = MPC8xxADS_U_BOOT_SIZE,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "User FS",
+ .offset = MPC8xxADS_FREE_AREA_OFFSET
+ }
+};
+
+#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0]))
+
+#endif
+
static int m8xx_set_rtc_time(unsigned long time);
static unsigned long m8xx_get_rtc_time(void);
void m8xx_calibrate_decr(void);
@@ -71,6 +106,10 @@ board_init(void)
void __init
m8xx_setup_arch(void)
{
+#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
+ bd_t *binfo = (bd_t *)__res;
+#endif
+
/* Reset the Communication Processor Module.
*/
m8xx_cpm_reset();
@@ -106,6 +145,17 @@ m8xx_setup_arch(void)
}
#endif
#endif
+
+#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS)
+#if defined(CONFIG_MTD_PHYSMAP)
+ physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize,
+ MPC8xxADS_BANK_WIDTH, NULL);
+#ifdef CONFIG_MTD_PARTITIONS
+ physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num);
+#endif /* CONFIG_MTD_PARTITIONS */
+#endif /* CONFIG_MTD_PHYSMAP */
+#endif
+
board_init();
}
OpenPOWER on IntegriCloud