diff options
Diffstat (limited to 'arch/ppc64/kernel/misc.S')
| -rw-r--r-- | arch/ppc64/kernel/misc.S | 939 |
1 files changed, 0 insertions, 939 deletions
diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S deleted file mode 100644 index 914632e..0000000 --- a/arch/ppc64/kernel/misc.S +++ /dev/null @@ -1,939 +0,0 @@ -/* - * arch/ppc/kernel/misc.S - * - * - * - * This file contains miscellaneous low-level functions. - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras. - * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <linux/sys.h> -#include <asm/unistd.h> -#include <asm/errno.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cache.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> - - .text - -/* - * Returns (address we were linked at) - (address we are running at) - * for use before the text and data are mapped to KERNELBASE. - */ - -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOADADDR(r4,1b) - sub r3,r4,r3 - mtlr r0 - blr - -_GLOBAL(get_msr) - mfmsr r3 - blr - -_GLOBAL(get_dar) - mfdar r3 - blr - -_GLOBAL(get_srr0) - mfsrr0 r3 - blr - -_GLOBAL(get_srr1) - mfsrr1 r3 - blr - -_GLOBAL(get_sp) - mr r3,r1 - blr - -#ifdef CONFIG_IRQSTACKS -_GLOBAL(call_do_softirq) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - bl .__do_softirq - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr - -_GLOBAL(call_handle_IRQ_event) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr -#endif /* CONFIG_IRQSTACKS */ - - /* - * To be called by C code which needs to do some operations with MMU - * disabled. Note that interrupts have to be disabled by the caller - * prior to calling us. The code called _MUST_ be in the RMO of course - * and part of the linear mapping as we don't attempt to translate the - * stack pointer at all. The function is called with the stack switched - * to this CPU emergency stack - * - * prototype is void *call_with_mmu_off(void *func, void *data); - * - * the called function is expected to be of the form - * - * void *called(void *data); - */ -_GLOBAL(call_with_mmu_off) - mflr r0 /* get link, save it on stackframe */ - std r0,16(r1) - mr r1,r5 /* save old stack ptr */ - ld r1,PACAEMERGSP(r13) /* get emerg. stack */ - subi r1,r1,STACK_FRAME_OVERHEAD - std r0,16(r1) /* save link on emerg. stack */ - std r5,0(r1) /* save old stack ptr in backchain */ - ld r3,0(r3) /* get to real function ptr (assume same TOC) */ - bl 2f /* we need LR to return, continue at label 2 */ - - ld r0,16(r1) /* we return here from the call, get LR and */ - ld r1,0(r1) /* .. old stack ptr */ - mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ - mfmsr r4 - ori r4,r4,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r4 - rfid - -2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ - mr r3,r4 /* get parameter */ - mfmsr r0 - ori r0,r0,MSR_IR|MSR_DR - xori r0,r0,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r0 - rfid - - - .section ".toc","aw" -PPC64_CACHES: - .tc ppc64_caches[TC],ppc64_caches - .section ".text" - -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * - * flush_icache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start through stop-1 inclusive - */ - -_KPROBE(__flush_icache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - * and in some cases i-cache and d-cache line sizes differ from - * each other. - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -1: dcbst 0,r6 - add r6,r6,r7 - bdnz 1b - sync - -/* Now invalidate the instruction cache */ - - lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 - lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -2: icbi 0,r6 - add r6,r6,r7 - bdnz 2b - isync - blr - .previous .text -/* - * Like above, but only do the D-cache. - * - * flush_dcache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - blr - -/* - * Like above, but works on non-mapped physical addresses. - * Use only for non-LPAR setups ! It also assumes real mode - * is cacheable. Used for flushing out the DART before using - * it as uncacheable memory - * - * flush_dcache_phys_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_phys_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mfmsr r5 /* Disable MMU Data Relocation */ - ori r0,r5,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsr r0 - sync - isync - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - mtmsr r5 /* Re-enable MMU Data Relocation */ - sync - isync - blr - -_GLOBAL(flush_inval_dcache_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - sync - isync - mtctr r8 -0: dcbf 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - blr - - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * - * void __flush_dcache_icache(void *page) - */ -_GLOBAL(__flush_dcache_icache) -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - -/* Flush the dcache */ - ld r7,PPC64_CACHES@toc(r2) - clrrdi r3,r3,PAGE_SHIFT /* Page align */ - lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */ - lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */ - mr r6,r3 - mtctr r4 -0: dcbst 0,r6 - add r6,r6,r5 - bdnz 0b - sync - -/* Now invalidate the icache */ - - lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */ - lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */ - mtctr r4 -1: icbi 0,r3 - add r3,r3,r5 - bdnz 1b - isync - blr - -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sthbrx r5,0,r3 - bdnz 00b - sync - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - bdnz 00b - sync - blr - -/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - bdnz 00b - sync - blr - -/* - * identify_cpu and calls setup_cpu - * In: r3 = base of the cpu_specs array - * r4 = address of cur_cpu_spec - * r5 = relocation offset - */ -_GLOBAL(identify_cpu) - mfpvr r7 -1: - lwz r8,CPU_SPEC_PVR_MASK(r3) - and r8,r8,r7 - lwz r9,CPU_SPEC_PVR_VALUE(r3) - cmplw 0,r9,r8 - beq 1f - addi r3,r3,CPU_SPEC_ENTRY_SIZE - b 1b -1: - add r0,r3,r5 - std r0,0(r4) - ld r4,CPU_SPEC_SETUP(r3) - sub r4,r4,r5 - ld r4,0(r4) - sub r4,r4,r5 - mtctr r4 - /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ - mr r4,r3 - mr r3,r5 - bctr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - LOADADDR(r6,cur_cpu_spec) - sub r6,r6,r3 - ld r4,0(r6) - sub r4,r4,r3 - ld r4,CPU_SPEC_FEATURES(r4) - /* Get the fixup table */ - LOADADDR(r6,__start___ftr_fixup) - sub r6,r6,r3 - LOADADDR(r7,__stop___ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) -/* - * Do an IO access in real mode - */ -_GLOBAL(real_readb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - lbz r3,0(r3) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr - -/* - * Do an IO access in real mode - */ -_GLOBAL(real_writeb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - stb r3,0(r4) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr -#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ - -/* - * SCOM access functions for 970 (FX only for now) - * - * unsigned long scom970_read(unsigned int address); - * void scom970_write(unsigned int address, unsigned long value); - * - * The address passed in is the 24 bits register address. This code - * is 970 specific and will not check the status bits, so you should - * know what you are doing. - */ -_GLOBAL(scom970_read) - /* interrupts off */ - mfmsr r4 - ori r0,r4,MSR_EE - xori r0,r0,MSR_EE - mtmsrd r0,1 - - /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits - * (including parity). On current CPUs they must be 0'd, - * and finally or in RW bit - */ - rlwinm r3,r3,8,0,15 - ori r3,r3,0x8000 - - /* do the actual scom read */ - sync - mtspr SPRN_SCOMC,r3 - isync - mfspr r3,SPRN_SCOMD - isync - mfspr r0,SPRN_SCOMC - isync - - /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah - * that's the best we can do). Not implemented yet as we don't use - * the scom on any of the bogus CPUs yet, but may have to be done - * ultimately - */ - - /* restore interrupts */ - mtmsrd r4,1 - blr - - -_GLOBAL(scom970_write) - /* interrupts off */ - mfmsr r5 - ori r0,r5,MSR_EE - xori r0,r0,MSR_EE - mtmsrd r0,1 - - /* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits - * (including parity). On current CPUs they must be 0'd. - */ - - rlwinm r3,r3,8,0,15 - - sync - mtspr SPRN_SCOMD,r4 /* write data */ - isync - mtspr SPRN_SCOMC,r3 /* write command */ - isync - mfspr 3,SPRN_SCOMC - isync - - /* restore interrupts */ - mtmsrd r5,1 - blr - - -/* - * Create a kernel thread - * kernel_thread(fn, arg, flags) - */ -_GLOBAL(kernel_thread) - std r29,-24(r1) - std r30,-16(r1) - stdu r1,-STACK_FRAME_OVERHEAD(r1) - mr r29,r3 - mr r30,r4 - ori r3,r5,CLONE_VM /* flags */ - oris r3,r3,(CLONE_UNTRACED>>16) - li r4,0 /* new sp (unused) */ - li r0,__NR_clone - sc - cmpdi 0,r3,0 /* parent or child? */ - bne 1f /* return if parent */ - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - ld r2,8(r29) - ld r29,0(r29) - mtlr r29 /* fn addr in lr */ - mr r3,r30 /* load arg and call fn */ - blrl - li r0,__NR_exit /* exit after child exits */ - li r3,0 - sc -1: addi r1,r1,STACK_FRAME_OVERHEAD - ld r29,-24(r1) - ld r30,-16(r1) - blr - -/* - * disable_kernel_fp() - * Disable the FPU. - */ -_GLOBAL(disable_kernel_fp) - mfmsr r3 - rldicl r0,r3,(63-MSR_FP_LG),1 - rldicl r3,r0,(MSR_FP_LG+1),0 - mtmsrd r3 /* disable use of fpu now */ - isync - blr - -#ifdef CONFIG_ALTIVEC - -#if 0 /* this has no callers for now */ -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr -#endif /* 0 */ - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - -_GLOBAL(__setup_cpu_power3) - blr - -_GLOBAL(execve) - li r0,__NR_execve - sc - bnslr - neg r3,r3 - blr - -/* kexec_wait(phys_cpu) - * - * wait for the flag to change, indicating this kernel is going away but - * the slave code for the next one is at addresses 0 to 100. - * - * This is used by all slaves. - * - * Physical (hardware) cpu id should be in r3. - */ -_GLOBAL(kexec_wait) - bl 1f -1: mflr r5 - addi r5,r5,kexec_flag-1b - -99: HMT_LOW -#ifdef CONFIG_KEXEC /* use no memory without kexec */ - lwz r4,0(r5) - cmpwi 0,r4,0 - bnea 0x60 -#endif - b 99b - -/* this can be in text because we won't change it until we are - * running in real anyways - */ -kexec_flag: - .long 0 - - -#ifdef CONFIG_KEXEC - -/* kexec_smp_wait(void) - * - * call with interrupts off - * note: this is a terminal routine, it does not save lr - * - * get phys id from paca - * set paca id to -1 to say we got here - * switch to real mode - * join other cpus in kexec_wait(phys_id) - */ -_GLOBAL(kexec_smp_wait) - lhz r3,PACAHWCPUID(r13) - li r4,-1 - sth r4,PACAHWCPUID(r13) /* let others know we left */ - bl real_mode - b .kexec_wait - -/* - * switch to real mode (turn mmu off) - * we use the early kernel trick that the hardware ignores bits - * 0 and 1 (big endian) of the effective address in real mode - * - * don't overwrite r3 here, it is live for kexec_wait above. - */ -real_mode: /* assume normal blr return */ -1: li r9,MSR_RI - li r10,MSR_DR|MSR_IR - mflr r11 /* return address to SRR0 */ - mfmsr r12 - andc r9,r12,r9 - andc r10,r12,r10 - - mtmsrd r9,1 - mtspr SPRN_SRR1,r10 - mtspr SPRN_SRR0,r11 - rfid - - -/* - * kexec_sequence(newstack, start, image, control, clear_all()) - * - * does the grungy work with stack switching and real mode switches - * also does simple calls to other code - */ - -_GLOBAL(kexec_sequence) - mflr r0 - std r0,16(r1) - - /* switch stacks to newstack -- &kexec_stack.stack */ - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - - li r0,0 - std r0,16(r1) - - /* save regs for local vars on new stack. - * yes, we won't go back, but ... - */ - std r31,-8(r1) - std r30,-16(r1) - std r29,-24(r1) - std r28,-32(r1) - std r27,-40(r1) - std r26,-48(r1) - std r25,-56(r1) - - stdu r1,-112-64(r1) - - /* save args into preserved regs */ - mr r31,r3 /* newstack (both) */ - mr r30,r4 /* start (real) */ - mr r29,r5 /* image (virt) */ - mr r28,r6 /* control, unused */ - mr r27,r7 /* clear_all() fn desc */ - mr r26,r8 /* spare */ - lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ - - /* disable interrupts, we are overwriting kernel data next */ - mfmsr r3 - rlwinm r3,r3,0,17,15 - mtmsrd r3,1 - - /* copy dest pages, flush whole dest image */ - mr r3,r29 - bl .kexec_copy_flush /* (image) */ - - /* turn off mmu */ - bl real_mode - - /* clear out hardware hash page table and tlb */ - ld r5,0(r27) /* deref function descriptor */ - mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ - -/* - * kexec image calling is: - * the first 0x100 bytes of the entry point are copied to 0 - * - * all slaves branch to slave = 0x60 (absolute) - * slave(phys_cpu_id); - * - * master goes to start = entry point - * start(phys_cpu_id, start, 0); - * - * - * a wrapper is needed to call existing kernels, here is an approximate - * description of one method: - * - * v2: (2.6.10) - * start will be near the boot_block (maybe 0x100 bytes before it?) - * it will have a 0x60, which will b to boot_block, where it will wait - * and 0 will store phys into struct boot-block and load r3 from there, - * copy kernel 0-0x100 and tell slaves to back down to 0x60 again - * - * v1: (2.6.9) - * boot block will have all cpus scanning device tree to see if they - * are the boot cpu ????? - * other device tree differences (prop sizes, va vs pa, etc)... - */ - - /* copy 0x100 bytes starting at start to 0 */ - li r3,0 - mr r4,r30 - li r5,0x100 - li r6,0 - bl .copy_and_flush /* (dest, src, copy limit, start offset) */ -1: /* assume normal blr return */ - - /* release other cpus to the new kernel secondary start at 0x60 */ - mflr r5 - li r6,1 - stw r6,kexec_flag-1b(5) - mr r3,r25 # my phys cpu - mr r4,r30 # start, aka phys mem offset - mtlr 4 - li r5,0 - blr /* image->start(physid, image->start, 0); */ -#endif /* CONFIG_KEXEC */ |
