diff options
Diffstat (limited to 'arch/ppc/platforms/rpx8260.h')
| -rw-r--r-- | arch/ppc/platforms/rpx8260.h | 81 |
1 files changed, 0 insertions, 81 deletions
diff --git a/arch/ppc/platforms/rpx8260.h b/arch/ppc/platforms/rpx8260.h deleted file mode 100644 index 843494a..0000000 --- a/arch/ppc/platforms/rpx8260.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Embedded Planet RPX6 (or RPX Super) MPC8260 board. - * Copied from the RPX-Classic and SBS8260 stuff. - * - * Copyright (c) 2001 Dan Malek <dan@embeddededge.com> - */ -#ifdef __KERNEL__ -#ifndef __ASM_PLATFORMS_RPX8260_H__ -#define __ASM_PLATFORMS_RPX8260_H__ - -/* A Board Information structure that is given to a program when - * prom starts it up. - */ -typedef struct bd_info { - unsigned int bi_memstart; /* Memory start address */ - unsigned int bi_memsize; /* Memory (end) size in bytes */ - unsigned int bi_nvsize; /* NVRAM size in bytes (can be 0) */ - unsigned int bi_intfreq; /* Internal Freq, in Hz */ - unsigned int bi_busfreq; /* Bus Freq, in MHz */ - unsigned int bi_cpmfreq; /* CPM Freq, in MHz */ - unsigned int bi_brgfreq; /* BRG Freq, in MHz */ - unsigned int bi_vco; /* VCO Out from PLL */ - unsigned int bi_baudrate; /* Default console baud rate */ - unsigned int bi_immr; /* IMMR when called from boot rom */ - unsigned char bi_enetaddr[6]; -} bd_t; - -extern bd_t m8xx_board_info; - -/* Memory map is configured by the PROM startup. - * We just map a few things we need. The CSR is actually 4 byte-wide - * registers that can be accessed as 8-, 16-, or 32-bit values. - */ -#define CPM_MAP_ADDR ((uint)0xf0000000) -#define RPX_CSR_ADDR ((uint)0xfa000000) -#define RPX_CSR_SIZE ((uint)(512 * 1024)) -#define RPX_NVRTC_ADDR ((uint)0xfa080000) -#define RPX_NVRTC_SIZE ((uint)(512 * 1024)) - -/* The RPX6 has 16, byte wide control/status registers. - * Not all are used (yet). - */ -extern volatile u_char *rpx6_csr_addr; - -/* Things of interest in the CSR. -*/ -#define BCSR0_ID_MASK ((u_char)0xf0) /* Read only */ -#define BCSR0_SWITCH_MASK ((u_char)0x0f) /* Read only */ -#define BCSR1_XCVR_SMC1 ((u_char)0x80) -#define BCSR1_XCVR_SMC2 ((u_char)0x40) -#define BCSR2_FLASH_WENABLE ((u_char)0x20) -#define BCSR2_NVRAM_ENABLE ((u_char)0x10) -#define BCSR2_ALT_IRQ2 ((u_char)0x08) -#define BCSR2_ALT_IRQ3 ((u_char)0x04) -#define BCSR2_PRST ((u_char)0x02) /* Force reset */ -#define BCSR2_ENPRST ((u_char)0x01) /* Enable POR */ -#define BCSR3_MODCLK_MASK ((u_char)0xe0) -#define BCSR3_ENCLKHDR ((u_char)0x10) -#define BCSR3_LED5 ((u_char)0x04) /* 0 == on */ -#define BCSR3_LED6 ((u_char)0x02) /* 0 == on */ -#define BCSR3_LED7 ((u_char)0x01) /* 0 == on */ -#define BCSR4_EN_PHY ((u_char)0x80) /* Enable PHY */ -#define BCSR4_EN_MII ((u_char)0x40) /* Enable PHY */ -#define BCSR4_MII_READ ((u_char)0x04) -#define BCSR4_MII_MDC ((u_char)0x02) -#define BCSR4_MII_MDIO ((u_char)0x01) -#define BCSR13_FETH_IRQMASK ((u_char)0xf0) -#define BCSR15_FETH_IRQ ((u_char)0x20) - -#define PHY_INTERRUPT SIU_INT_IRQ7 - -/* For our show_cpuinfo hooks. */ -#define CPUINFO_VENDOR "Embedded Planet" -#define CPUINFO_MACHINE "EP8260 PowerPC" - -/* Warm reset vector. */ -#define BOOTROM_RESTART_ADDR ((uint)0xfff00104) - -#endif /* __ASM_PLATFORMS_RPX8260_H__ */ -#endif /* __KERNEL__ */ |
