diff options
Diffstat (limited to 'arch/ppc/platforms/pmac_time.c')
| -rw-r--r-- | arch/ppc/platforms/pmac_time.c | 291 |
1 files changed, 0 insertions, 291 deletions
diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c deleted file mode 100644 index edb9fcc..0000000 --- a/arch/ppc/platforms/pmac_time.c +++ /dev/null @@ -1,291 +0,0 @@ -/* - * Support for periodic interrupts (100 per second) and for getting - * the current time from the RTC on Power Macintoshes. - * - * We use the decrementer register for our periodic interrupts. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - */ -#include <linux/config.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/time.h> -#include <linux/adb.h> -#include <linux/cuda.h> -#include <linux/pmu.h> -#include <linux/hardirq.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/machdep.h> -#include <asm/time.h> -#include <asm/nvram.h> - -/* Apparently the RTC stores seconds since 1 Jan 1904 */ -#define RTC_OFFSET 2082844800 - -/* - * Calibrate the decrementer frequency with the VIA timer 1. - */ -#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */ - -/* VIA registers */ -#define RS 0x200 /* skip between registers */ -#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */ -#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */ -#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */ -#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */ -#define ACR (11*RS) /* Auxiliary control register */ -#define IFR (13*RS) /* Interrupt flag register */ - -/* Bits in ACR */ -#define T1MODE 0xc0 /* Timer 1 mode */ -#define T1MODE_CONT 0x40 /* continuous interrupts */ - -/* Bits in IFR and IER */ -#define T1_INT 0x40 /* Timer 1 interrupt */ - -extern struct timezone sys_tz; - -long __init -pmac_time_init(void) -{ -#ifdef CONFIG_NVRAM - s32 delta = 0; - int dst; - - delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16; - delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8; - delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb); - if (delta & 0x00800000UL) - delta |= 0xFF000000UL; - dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0); - printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60, - dst ? "on" : "off"); - return delta; -#else - return 0; -#endif -} - -unsigned long -pmac_get_rtc_time(void) -{ -#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) - struct adb_request req; - unsigned long now; -#endif - - /* Get the time from the RTC */ - switch (sys_ctrler) { -#ifdef CONFIG_ADB_CUDA - case SYS_CTRLER_CUDA: - if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) - return 0; - while (!req.complete) - cuda_poll(); - if (req.reply_len != 7) - printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n", - req.reply_len); - now = (req.reply[3] << 24) + (req.reply[4] << 16) - + (req.reply[5] << 8) + req.reply[6]; - return now - RTC_OFFSET; -#endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) - return 0; - while (!req.complete) - pmu_poll(); - if (req.reply_len != 4) - printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n", - req.reply_len); - now = (req.reply[0] << 24) + (req.reply[1] << 16) - + (req.reply[2] << 8) + req.reply[3]; - return now - RTC_OFFSET; -#endif /* CONFIG_ADB_PMU */ - default: ; - } - return 0; -} - -int -pmac_set_rtc_time(unsigned long nowtime) -{ -#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU) - struct adb_request req; -#endif - - nowtime += RTC_OFFSET; - - switch (sys_ctrler) { -#ifdef CONFIG_ADB_CUDA - case SYS_CTRLER_CUDA: - if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, - nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) - return 0; - while (!req.complete) - cuda_poll(); - if ((req.reply_len != 3) && (req.reply_len != 7)) - printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n", - req.reply_len); - return 1; -#endif /* CONFIG_ADB_CUDA */ -#ifdef CONFIG_ADB_PMU - case SYS_CTRLER_PMU: - if (pmu_request(&req, NULL, 5, PMU_SET_RTC, - nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0) - return 0; - while (!req.complete) - pmu_poll(); - if (req.reply_len != 0) - printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n", - req.reply_len); - return 1; -#endif /* CONFIG_ADB_PMU */ - default: - return 0; - } -} - -/* - * Calibrate the decrementer register using VIA timer 1. - * This is used both on powermacs and CHRP machines. - */ -int __init -via_calibrate_decr(void) -{ - struct device_node *vias; - volatile unsigned char __iomem *via; - int count = VIA_TIMER_FREQ_6 / 100; - unsigned int dstart, dend; - - vias = find_devices("via-cuda"); - if (vias == 0) - vias = find_devices("via-pmu"); - if (vias == 0) - vias = find_devices("via"); - if (vias == 0 || vias->n_addrs == 0) - return 0; - via = ioremap(vias->addrs[0].address, vias->addrs[0].size); - - /* set timer 1 for continuous interrupts */ - out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT); - /* set the counter to a small value */ - out_8(&via[T1CH], 2); - /* set the latch to `count' */ - out_8(&via[T1LL], count); - out_8(&via[T1LH], count >> 8); - /* wait until it hits 0 */ - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dstart = get_dec(); - /* clear the interrupt & wait until it hits 0 again */ - in_8(&via[T1CL]); - while ((in_8(&via[IFR]) & T1_INT) == 0) - ; - dend = get_dec(); - - tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); - tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", - tb_ticks_per_jiffy, dstart - dend); - - iounmap(via); - - return 1; -} - -#ifdef CONFIG_PM -/* - * Reset the time after a sleep. - */ -static int -time_sleep_notify(struct pmu_sleep_notifier *self, int when) -{ - static unsigned long time_diff; - unsigned long flags; - unsigned long seq; - - switch (when) { - case PBOOK_SLEEP_NOW: - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - time_diff = xtime.tv_sec - pmac_get_rtc_time(); - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - break; - case PBOOK_WAKE: - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = pmac_get_rtc_time() + time_diff; - xtime.tv_nsec = 0; - last_rtc_update = xtime.tv_sec; - write_sequnlock_irqrestore(&xtime_lock, flags); - break; - } - return PBOOK_SLEEP_OK; -} - -static struct pmu_sleep_notifier time_sleep_notifier = { - time_sleep_notify, SLEEP_LEVEL_MISC, -}; -#endif /* CONFIG_PM */ - -/* - * Query the OF and get the decr frequency. - * This was taken from the pmac time_init() when merging the prep/pmac - * time functions. - */ -void __init -pmac_calibrate_decr(void) -{ - struct device_node *cpu; - unsigned int freq, *fp; - -#ifdef CONFIG_PM - pmu_register_sleep_notifier(&time_sleep_notifier); -#endif /* CONFIG_PM */ - - /* We assume MacRISC2 machines have correct device-tree - * calibration. That's better since the VIA itself seems - * to be slightly off. --BenH - */ - if (!machine_is_compatible("MacRISC2") && - !machine_is_compatible("MacRISC3") && - !machine_is_compatible("MacRISC4")) - if (via_calibrate_decr()) - return; - - /* Special case: QuickSilver G4s seem to have a badly calibrated - * timebase-frequency in OF, VIA is much better on these. We should - * probably implement calibration based on the KL timer on these - * machines anyway... -BenH - */ - if (machine_is_compatible("PowerMac3,5")) - if (via_calibrate_decr()) - return; - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = find_type_devices("cpu"); - if (cpu == 0) - panic("can't find cpu node in time_init"); - fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL); - if (fp == 0) - panic("can't get cpu timebase frequency"); - freq = *fp; - printk("time_init: decrementer frequency = %u.%.6u MHz\n", - freq/1000000, freq%1000000); - tb_ticks_per_jiffy = freq / HZ; - tb_to_us = mulhwu_scale_factor(freq, 1000000); -} |
