summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/pmac_time.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/pmac_time.c')
-rw-r--r--arch/ppc/platforms/pmac_time.c291
1 files changed, 0 insertions, 291 deletions
diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c
deleted file mode 100644
index edb9fcc..0000000
--- a/arch/ppc/platforms/pmac_time.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * Support for periodic interrupts (100 per second) and for getting
- * the current time from the RTC on Power Macintoshes.
- *
- * We use the decrementer register for our periodic interrupts.
- *
- * Paul Mackerras August 1996.
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <linux/hardirq.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/nvram.h>
-
-/* Apparently the RTC stores seconds since 1 Jan 1904 */
-#define RTC_OFFSET 2082844800
-
-/*
- * Calibrate the decrementer frequency with the VIA timer 1.
- */
-#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
-
-/* VIA registers */
-#define RS 0x200 /* skip between registers */
-#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
-#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
-#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
-#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
-#define ACR (11*RS) /* Auxiliary control register */
-#define IFR (13*RS) /* Interrupt flag register */
-
-/* Bits in ACR */
-#define T1MODE 0xc0 /* Timer 1 mode */
-#define T1MODE_CONT 0x40 /* continuous interrupts */
-
-/* Bits in IFR and IER */
-#define T1_INT 0x40 /* Timer 1 interrupt */
-
-extern struct timezone sys_tz;
-
-long __init
-pmac_time_init(void)
-{
-#ifdef CONFIG_NVRAM
- s32 delta = 0;
- int dst;
-
- delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
- delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
- delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
- if (delta & 0x00800000UL)
- delta |= 0xFF000000UL;
- dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
- printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
- dst ? "on" : "off");
- return delta;
-#else
- return 0;
-#endif
-}
-
-unsigned long
-pmac_get_rtc_time(void)
-{
-#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
- struct adb_request req;
- unsigned long now;
-#endif
-
- /* Get the time from the RTC */
- switch (sys_ctrler) {
-#ifdef CONFIG_ADB_CUDA
- case SYS_CTRLER_CUDA:
- if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
- return 0;
- while (!req.complete)
- cuda_poll();
- if (req.reply_len != 7)
- printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
- req.reply_len);
- now = (req.reply[3] << 24) + (req.reply[4] << 16)
- + (req.reply[5] << 8) + req.reply[6];
- return now - RTC_OFFSET;
-#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_ADB_PMU
- case SYS_CTRLER_PMU:
- if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
- return 0;
- while (!req.complete)
- pmu_poll();
- if (req.reply_len != 4)
- printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
- req.reply_len);
- now = (req.reply[0] << 24) + (req.reply[1] << 16)
- + (req.reply[2] << 8) + req.reply[3];
- return now - RTC_OFFSET;
-#endif /* CONFIG_ADB_PMU */
- default: ;
- }
- return 0;
-}
-
-int
-pmac_set_rtc_time(unsigned long nowtime)
-{
-#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
- struct adb_request req;
-#endif
-
- nowtime += RTC_OFFSET;
-
- switch (sys_ctrler) {
-#ifdef CONFIG_ADB_CUDA
- case SYS_CTRLER_CUDA:
- if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
- nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
- return 0;
- while (!req.complete)
- cuda_poll();
- if ((req.reply_len != 3) && (req.reply_len != 7))
- printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
- req.reply_len);
- return 1;
-#endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_ADB_PMU
- case SYS_CTRLER_PMU:
- if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
- nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
- return 0;
- while (!req.complete)
- pmu_poll();
- if (req.reply_len != 0)
- printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
- req.reply_len);
- return 1;
-#endif /* CONFIG_ADB_PMU */
- default:
- return 0;
- }
-}
-
-/*
- * Calibrate the decrementer register using VIA timer 1.
- * This is used both on powermacs and CHRP machines.
- */
-int __init
-via_calibrate_decr(void)
-{
- struct device_node *vias;
- volatile unsigned char __iomem *via;
- int count = VIA_TIMER_FREQ_6 / 100;
- unsigned int dstart, dend;
-
- vias = find_devices("via-cuda");
- if (vias == 0)
- vias = find_devices("via-pmu");
- if (vias == 0)
- vias = find_devices("via");
- if (vias == 0 || vias->n_addrs == 0)
- return 0;
- via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
-
- /* set timer 1 for continuous interrupts */
- out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
- /* set the counter to a small value */
- out_8(&via[T1CH], 2);
- /* set the latch to `count' */
- out_8(&via[T1LL], count);
- out_8(&via[T1LH], count >> 8);
- /* wait until it hits 0 */
- while ((in_8(&via[IFR]) & T1_INT) == 0)
- ;
- dstart = get_dec();
- /* clear the interrupt & wait until it hits 0 again */
- in_8(&via[T1CL]);
- while ((in_8(&via[IFR]) & T1_INT) == 0)
- ;
- dend = get_dec();
-
- tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
- tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
-
- printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
- tb_ticks_per_jiffy, dstart - dend);
-
- iounmap(via);
-
- return 1;
-}
-
-#ifdef CONFIG_PM
-/*
- * Reset the time after a sleep.
- */
-static int
-time_sleep_notify(struct pmu_sleep_notifier *self, int when)
-{
- static unsigned long time_diff;
- unsigned long flags;
- unsigned long seq;
-
- switch (when) {
- case PBOOK_SLEEP_NOW:
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- time_diff = xtime.tv_sec - pmac_get_rtc_time();
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- break;
- case PBOOK_WAKE:
- write_seqlock_irqsave(&xtime_lock, flags);
- xtime.tv_sec = pmac_get_rtc_time() + time_diff;
- xtime.tv_nsec = 0;
- last_rtc_update = xtime.tv_sec;
- write_sequnlock_irqrestore(&xtime_lock, flags);
- break;
- }
- return PBOOK_SLEEP_OK;
-}
-
-static struct pmu_sleep_notifier time_sleep_notifier = {
- time_sleep_notify, SLEEP_LEVEL_MISC,
-};
-#endif /* CONFIG_PM */
-
-/*
- * Query the OF and get the decr frequency.
- * This was taken from the pmac time_init() when merging the prep/pmac
- * time functions.
- */
-void __init
-pmac_calibrate_decr(void)
-{
- struct device_node *cpu;
- unsigned int freq, *fp;
-
-#ifdef CONFIG_PM
- pmu_register_sleep_notifier(&time_sleep_notifier);
-#endif /* CONFIG_PM */
-
- /* We assume MacRISC2 machines have correct device-tree
- * calibration. That's better since the VIA itself seems
- * to be slightly off. --BenH
- */
- if (!machine_is_compatible("MacRISC2") &&
- !machine_is_compatible("MacRISC3") &&
- !machine_is_compatible("MacRISC4"))
- if (via_calibrate_decr())
- return;
-
- /* Special case: QuickSilver G4s seem to have a badly calibrated
- * timebase-frequency in OF, VIA is much better on these. We should
- * probably implement calibration based on the KL timer on these
- * machines anyway... -BenH
- */
- if (machine_is_compatible("PowerMac3,5"))
- if (via_calibrate_decr())
- return;
- /*
- * The cpu node should have a timebase-frequency property
- * to tell us the rate at which the decrementer counts.
- */
- cpu = find_type_devices("cpu");
- if (cpu == 0)
- panic("can't find cpu node in time_init");
- fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
- if (fp == 0)
- panic("can't get cpu timebase frequency");
- freq = *fp;
- printk("time_init: decrementer frequency = %u.%.6u MHz\n",
- freq/1000000, freq%1000000);
- tb_ticks_per_jiffy = freq / HZ;
- tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
OpenPOWER on IntegriCloud