diff options
Diffstat (limited to 'arch/ppc/platforms/adir_pci.c')
| -rw-r--r-- | arch/ppc/platforms/adir_pci.c | 247 |
1 files changed, 0 insertions, 247 deletions
diff --git a/arch/ppc/platforms/adir_pci.c b/arch/ppc/platforms/adir_pci.c deleted file mode 100644 index f94ac53..0000000 --- a/arch/ppc/platforms/adir_pci.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * arch/ppc/platforms/adir_pci.c - * - * PCI support for SBS Adirondack - * - * By Michael Sokolov <msokolov@ivan.Harhan.ORG> - * based on the K2 version by Matt Porter <mporter@mvista.com> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> - -#include <syslib/cpc710.h> -#include "adir.h" - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif /* DEBUG */ - -static inline int __init -adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ -#define PCIIRQ(a,b,c,d) {ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d}, - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - /* - * The three PCI devices on the motherboard have dedicated lines to the - * CPLD interrupt controller, bypassing the standard PCI INTA-D and the - * PC interrupt controller. All other PCI devices (slots) have usual - * staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and - * PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D - * also go to the south bridge, so we have the option of taking them - * via the CPLD interrupt controller or via the south bridge 8259 - * 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt - * controller. We take all PCI interrupts via the CPLD interrupt - * controller as recommended by SBS. - * - * We also have some monkey business with the PCI devices within the - * VT82C686B south bridge itself. This chip actually has 7 functions on - * its IDSEL. Function 0 is the actual south bridge, function 1 is IDE, - * and function 4 is some special stuff. The other 4 functions are just - * regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5 - * and 6 are audio (not supported on the Adirondack). - * - * This is where the monkey business begins. PCI devices are supposed - * to signal normal PCI interrupts. But the 4 functions in question are - * located in the south bridge chip, which is designed with the - * assumption that it will be fielding PCI INTA-D interrupts rather - * than generating them. Here's what it does. Each of the functions in - * question routes its interrupt to one of the IRQs on the 8259 thingy. - * Which one? It looks at the Interrupt Line register in the PCI config - * space, even though the PCI spec says it's for BIOS/OS interaction - * only. - * - * How do we deal with this? We take these interrupts via 8259 IRQs as - * we have to. We return the desired IRQ numbers from this routine when - * called for the functions in question. The PCI scan code will then - * stick our return value into the Interrupt Line register in the PCI - * config space, and the interrupt will actually go there. We identify - * these functions within the south bridge IDSEL by their interrupt pin - * numbers, as the VT82C686B has 04 in the Interrupt Pin register for - * USB and 03 for audio. - */ - if (!hose->index) { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - /* south bridge */ PCIIRQ(IDE0, NONE, VIA_AUDIO, VIA_USB) - /* Ethernet 0 */ PCIIRQ(MBETH0, MBETH0, MBETH0, MBETH0) - /* PCI0 slot 1 */ PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA) - /* PCI0 slot 2 */ PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB) - /* PCI0 slot 3 */ PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC) - }; - const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } else { - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - /* Ethernet 1 */ PCIIRQ(MBETH1, MBETH1, MBETH1, MBETH1) - /* SCSI */ PCIIRQ(MBSCSI, MBSCSI, MBSCSI, MBSCSI) - /* PCI1 slot 1 */ PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA) - /* PCI1 slot 2 */ PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB) - /* PCI1 slot 3 */ PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC) - }; - const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; - } -#undef PCIIRQ -} - -static void -adir_pcibios_fixup_resources(struct pci_dev *dev) -{ - int i; - - if ((dev->vendor == PCI_VENDOR_ID_IBM) && - (dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64)) - { - DBG("Fixup CPC710 resources\n"); - for (i=0; i<DEVICE_COUNT_RESOURCE; i++) - { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - } - } -} - -/* - * CPC710 DD3 has an errata causing it to hang the system if a type 0 config - * cycle is attempted on its PCI32 interface with a device number > 21. - * CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31. - * Per the PCI spec it MUST accept all other device numbers and do nothing, and - * software MUST scan all device numbers without assuming how IDSELs are - * mapped. However, as the CPC710 DD3's errata causes such correct scanning - * procedure to hang the system, we have no choice but to introduce this hack - * of knowingly avoiding device numbers > 21 on PCI0, - */ -static int -adir_exclude_device(u_char bus, u_char devfn) -{ - if ((bus == 0) && (PCI_SLOT(devfn) > 21)) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -void adir_find_bridges(void) -{ - struct pci_controller *hose_a, *hose_b; - - /* Setup PCI32 hose */ - hose_a = pcibios_alloc_controller(); - if (!hose_a) - return; - - hose_a->first_busno = 0; - hose_a->last_busno = 0xff; - hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE; - hose_a->io_space.start = 0; - hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1; - hose_a->mem_space.start = 0; - hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1; - hose_a->io_resource.start = 0; - hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1; - hose_a->io_resource.flags = IORESOURCE_IO; - hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE; - hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE + - ADIR_PCI32_MEM_SIZE - 1; - hose_a->mem_resources[0].flags = IORESOURCE_MEM; - hose_a->io_base_phys = ADIR_PCI32_IO_BASE; - hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE; - - ppc_md.pci_exclude_device = adir_exclude_device; - setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR, - ADIR_PCI32_CONFIG_DATA); - - /* Initialize PCI32 bus registers */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, - hose_a->first_busno); - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_a->last_busno); - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - - /* Write out correct max subordinate bus number for hose A */ - early_write_config_byte(hose_a, - hose_a->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_a->last_busno); - - /* Setup PCI64 hose */ - hose_b = pcibios_alloc_controller(); - if (!hose_b) - return; - - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE; - hose_b->io_space.start = 0; - hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1; - hose_b->mem_space.start = 0; - hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1; - hose_b->io_resource.start = 0; - hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1; - hose_b->io_resource.flags = IORESOURCE_IO; - hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE; - hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE + - ADIR_PCI64_MEM_SIZE - 1; - hose_b->mem_resources[0].flags = IORESOURCE_MEM; - hose_b->io_base_phys = ADIR_PCI64_IO_BASE; - hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE; - - setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR, - ADIR_PCI64_CONFIG_DATA); - - /* Initialize PCI64 bus registers */ - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - 0xff); - - early_write_config_byte(hose_b, - 0, - PCI_DEVFN(0, 0), - CPC710_BUS_NUMBER, - hose_b->first_busno); - - hose_b->last_busno = pciauto_bus_scan(hose_b, - hose_b->first_busno); - - /* Write out correct max subordinate bus number for hose B */ - early_write_config_byte(hose_b, - hose_b->first_busno, - PCI_DEVFN(0, 0), - CPC710_SUB_BUS_NUMBER, - hose_b->last_busno); - - ppc_md.pcibios_fixup = NULL; - ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = adir_map_irq; -} |
