diff options
Diffstat (limited to 'arch/ppc/platforms/85xx/mpc85xx_cds_common.c')
| -rw-r--r-- | arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 95 |
1 files changed, 46 insertions, 49 deletions
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c index e7cfa49..b52c431 100644 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -42,7 +42,6 @@ #include <asm/todc.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/prom.h> #include <asm/open_pic.h> #include <asm/i8259.h> #include <asm/bootinfo.h> @@ -73,40 +72,8 @@ static int cds_pci_slot = 2; static volatile u8 * cadmus; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ - static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + MPC85XX_INTERNAL_IRQ_SENSES, #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ @@ -191,9 +158,13 @@ mpc85xx_cds_init_IRQ(void) OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); /* Skip reserved space and internal sources */ +#ifdef CONFIG_MPC8548 + openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200); +#else openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); +#endif /* Map PIC IRQs 0-11 */ - openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. @@ -475,26 +446,52 @@ mpc85xx_cds_setup_arch(void) #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ - invalidate_tlbcam_entry(NUM_TLBCAMS - 1); + invalidate_tlbcam_entry(num_tlbcam_entries - 1); #endif /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 0; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->interruptPHY = MPC85xx_IRQ_EXT5; - pdata->phyid = 1; - /* fixup phy address */ - pdata->phy_reg_addr += binfo->bi_immr_base; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + ppc_sys_device_remove(MPC85xx_eTSEC3); + ppc_sys_device_remove(MPC85xx_eTSEC4); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) @@ -531,7 +528,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); |
