1 files changed, 89 insertions, 0 deletions

diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
index d90cd24..94badaf 100644
--- a/arch/ppc/platforms/85xx/mpc8560_ads.c
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c
@@ -29,6 +29,7 @@
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
+#include <linux/fs_enet_pd.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -58,6 +59,71 @@
  * Setup the architecture
  *
  */
+static void init_fcc_ioports(void)
+{
+	struct immap *immap;
+	struct io_port *io;
+	u32 tempval;
+
+	immap = cpm2_immr;
+
+	io = &immap->im_ioport;
+	/* FCC2/3 are on the ports B/C. */
+	tempval = in_be32(&io->iop_pdirb);
+	tempval &= ~PB2_DIRB0;
+	tempval |= PB2_DIRB1;
+	out_be32(&io->iop_pdirb, tempval);
+
+	tempval = in_be32(&io->iop_psorb);
+	tempval &= ~PB2_PSORB0;
+	tempval |= PB2_PSORB1;
+	out_be32(&io->iop_psorb, tempval);
+
+	tempval = in_be32(&io->iop_pparb);
+	tempval |= (PB2_DIRB0 | PB2_DIRB1);
+	out_be32(&io->iop_pparb, tempval);
+
+	tempval = in_be32(&io->iop_pdirb);
+	tempval &= ~PB3_DIRB0;
+	tempval |= PB3_DIRB1;
+	out_be32(&io->iop_pdirb, tempval);
+
+	tempval = in_be32(&io->iop_psorb);
+	tempval &= ~PB3_PSORB0;
+	tempval |= PB3_PSORB1;
+	out_be32(&io->iop_psorb, tempval);
+
+	tempval = in_be32(&io->iop_pparb);
+	tempval |= (PB3_DIRB0 | PB3_DIRB1);
+	out_be32(&io->iop_pparb, tempval);
+
+        tempval = in_be32(&io->iop_pdirc);
+        tempval |= PC3_DIRC1;
+        out_be32(&io->iop_pdirc, tempval);
+
+        tempval = in_be32(&io->iop_pparc);
+        tempval |= PC3_DIRC1;
+        out_be32(&io->iop_pparc, tempval);
+
+	/* Port C has clocks......  */
+	tempval = in_be32(&io->iop_psorc);
+	tempval &= ~(CLK_TRX);
+	out_be32(&io->iop_psorc, tempval);
+
+	tempval = in_be32(&io->iop_pdirc);
+	tempval &= ~(CLK_TRX);
+	out_be32(&io->iop_pdirc, tempval);
+	tempval = in_be32(&io->iop_pparc);
+	tempval |= (CLK_TRX);
+	out_be32(&io->iop_pparc, tempval);
+
+	/* Configure Serial Interface clock routing.
+	 * First,  clear all FCC bits to zero,
+	 * then set the ones we want.
+	 */
+	immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK);
+	immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE;
+}
 
 static void __init
 mpc8560ads_setup_arch(void)
@@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void)
 	unsigned int freq;
 	struct gianfar_platform_data *pdata;
 	struct gianfar_mdio_data *mdata;
+	struct fs_platform_info *fpi;
 
 	cpm2_reset();
 
@@ -110,6 +177,28 @@ mpc8560ads_setup_arch(void)
 		memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
 	}
 
+	init_fcc_ioports();
+	ppc_sys_device_remove(MPC85xx_CPM_FCC1);
+
+	fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2);
+	if (fpi) {
+		memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
+		fpi->bus_id = "0:02";
+		fpi->phy_addr = 2;
+		fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
+		fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1];
+	}
+
+	fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3);
+	if (fpi) {
+		memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
+		fpi->macaddr[5] += 1;
+		fpi->bus_id = "0:03";
+		fpi->phy_addr = 3;
+		fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
+		fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2];
+	}
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (initrd_start)
 		ROOT_DEV = Root_RAM0;