diff options
Diffstat (limited to 'arch/ppc/platforms/4xx/ebony.h')
-rw-r--r-- | arch/ppc/platforms/4xx/ebony.h | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h deleted file mode 100644 index f40e33d..0000000 --- a/arch/ppc/platforms/4xx/ebony.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Ebony board definitions - * - * Matt Porter <mporter@mvista.com> - * - * Copyright 2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_EBONY_H__ -#define __ASM_EBONY_H__ - -#include <platforms/4xx/ibm440gp.h> - -/* F/W TLB mapping used in bootloader glue to reset EMAC */ -#define PPC44x_EMAC0_MR0 0xE0000800 - -/* Where to find the MAC info */ -#define OPENBIOS_MAC_BASE 0xfffffe0c -#define OPENBIOS_MAC_OFFSET 0x0c - -/* Default clock rates for Rev. B and Rev. C silicon */ -#define EBONY_440GP_RB_SYSCLK 33000000 -#define EBONY_440GP_RC_SYSCLK 400000000 - -/* RTC/NVRAM location */ -#define EBONY_RTC_ADDR 0x0000000148000000ULL -#define EBONY_RTC_SIZE 0x2000 - -/* Flash */ -#define EBONY_FPGA_ADDR 0x0000000148300000ULL -#define EBONY_BOOT_SMALL_FLASH(x) (x & 0x20) -#define EBONY_ONBRD_FLASH_EN(x) (x & 0x02) -#define EBONY_FLASH_SEL(x) (x & 0x01) -#define EBONY_SMALL_FLASH_LOW1 0x00000001ff800000ULL -#define EBONY_SMALL_FLASH_LOW2 0x00000001ff880000ULL -#define EBONY_SMALL_FLASH_HIGH1 0x00000001fff00000ULL -#define EBONY_SMALL_FLASH_HIGH2 0x00000001fff80000ULL -#define EBONY_SMALL_FLASH_SIZE 0x80000 -#define EBONY_LARGE_FLASH_LOW 0x00000001ff800000ULL -#define EBONY_LARGE_FLASH_HIGH 0x00000001ffc00000ULL -#define EBONY_LARGE_FLASH_SIZE 0x400000 - -#define EBONY_SMALL_FLASH_BASE 0x00000001fff80000ULL -#define EBONY_LARGE_FLASH_BASE 0x00000001ff800000ULL - -/* - * Serial port defines - */ - -#if defined(__BOOTER__) -/* OpenBIOS defined UART mappings, used by bootloader shim */ -#define UART0_IO_BASE 0xE0000200 -#define UART1_IO_BASE 0xE0000300 -#else -/* head_44x.S created UART mapping, used before early_serial_setup. - * We cannot use default OpenBIOS UART mappings because they - * don't work for configurations with more than 512M RAM. --ebs - */ -#define UART0_IO_BASE 0xF0000200 -#define UART1_IO_BASE 0xF0000300 -#endif - -/* external Epson SG-615P */ -#define BASE_BAUD 691200 - -#define STD_UART_OP(num) \ - { 0, BASE_BAUD, 0, UART##num##_INT, \ - (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: (void*)UART##num##_IO_BASE, \ - io_type: SERIAL_IO_MEM}, - -#define SERIAL_PORT_DFNS \ - STD_UART_OP(0) \ - STD_UART_OP(1) - -/* PCI support */ -#define EBONY_PCI_LOWER_IO 0x00000000 -#define EBONY_PCI_UPPER_IO 0x0000ffff -#define EBONY_PCI_LOWER_MEM 0x80002000 -#define EBONY_PCI_UPPER_MEM 0xffffefff - -#define EBONY_PCI_CFGREGS_BASE 0x000000020ec00000 -#define EBONY_PCI_CFGA_PLB32 0x0ec00000 -#define EBONY_PCI_CFGD_PLB32 0x0ec00004 - -#define EBONY_PCI_IO_BASE 0x0000000208000000ULL -#define EBONY_PCI_IO_SIZE 0x00010000 -#define EBONY_PCI_MEM_OFFSET 0x00000000 - -#endif /* __ASM_EBONY_H__ */ -#endif /* __KERNEL__ */ |