summaryrefslogtreecommitdiffstats
path: root/arch/ppc/boot/simple/qspan_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/boot/simple/qspan_pci.c')
-rw-r--r--arch/ppc/boot/simple/qspan_pci.c269
1 files changed, 0 insertions, 269 deletions
diff --git a/arch/ppc/boot/simple/qspan_pci.c b/arch/ppc/boot/simple/qspan_pci.c
deleted file mode 100644
index d2966d0..0000000
--- a/arch/ppc/boot/simple/qspan_pci.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * LinuxPPC arch/ppc/kernel/qspan_pci.c Dan Malek (dmalek@jlc.net)
- *
- * QSpan Motorola bus to PCI bridge. The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation. First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-/*
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt. So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present. I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us. This presents a problem for the Linux PCI
- * functions, which assume little endian. For example, we see the
- * first 32-bit word like this:
- * ------------------------
- * | Device ID | Vendor ID |
- * ------------------------
- * If we read/write as a double word, that's OK. But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe. We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero. Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero. Read operations
- * require we read the entire word and then sort out what should be
- * returned. Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack. We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN. If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_pci_config(x, addr, op) \
- __asm__ __volatile__( \
- "1: "op" %0,0(%1)\n" \
- " eieio\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r"(x) : "r"(addr))
-
-#define QS_CONFIG_ADDR ((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA ((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
- (((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
- mk_config_addr(bus, dev, offset) | 1;
-
-/* Initialize the QSpan device registers after power up.
-*/
-void
-qspan_init(void)
-{
- uint *qptr;
-
-
-
- qptr = (uint *)PCI_CSR_ADDR;
-
- /* PCI Configuration/status. Upper bits written to clear
- * pending interrupt or status. Lower bits enable QSPAN as
- * PCI master, enable memory and I/O cycles, and enable PCI
- * parity error checking.
- * IMPORTANT: The last two bits of this word enable PCI
- * master cycles into the QBus. The QSpan is broken and can't
- * meet the timing specs of the PQ bus for this to work. Therefore,
- * if you don't have external bus arbitration, you can't use
- * this function.
- */
-#ifdef EXTERNAL_PQ_ARB
- qptr[1] = 0xf9000147;
-#else
- qptr[1] = 0xf9000144;
-#endif
-
- /* PCI Misc configuration. Set PCI latency timer resolution
- * of 8 cycles, set cache size to 4 x 32.
- */
- qptr[3] = 0;
-
- /* Set up PCI Target address mapping. Enable, Posted writes,
- * 2Gbyte space (processor memory controller determines actual size).
- */
- qptr[64] = 0x8f000080;
-
- /* Map processor 0x80000000 to PCI 0x00000000.
- * Processor address bit 1 determines I/O type access (0x80000000)
- * or memory type access (0xc0000000).
- */
- qptr[65] = 0x80000000;
-
- /* Enable error logging and clear any pending error status.
- */
- qptr[80] = 0x90000000;
-
- qptr[512] = 0x000c0003;
-
- /* Set up Qbus slave image.
- */
- qptr[960] = 0x01000000;
- qptr[961] = 0x000000d1;
- qptr[964] = 0x00000000;
- qptr[965] = 0x000000d1;
-
-}
-
-/* Functions to support PCI bios-like features to read/write configuration
- * space. If the function fails for any reason, a -1 (0xffffffff) value
- * must be returned.
- */
-#define DEVICE_NOT_FOUND (-1)
-#define SUCCESSFUL 0
-
-int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned char *val)
-{
- uint temp;
- u_char *cp;
-
- if ((bus > 7) || (dev_fn > 127)) {
- *val = 0xff;
- return DEVICE_NOT_FOUND;
- }
-
- if (bus == 0)
- *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
- else
- *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
- __get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
- offset ^= 0x03;
- cp = ((u_char *)&temp) + (offset & 0x03);
- *val = *cp;
- return SUCCESSFUL;
-}
-
-int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned short *val)
-{
- uint temp;
- ushort *sp;
-
- if ((bus > 7) || (dev_fn > 127)) {
- *val = 0xffff;
- return DEVICE_NOT_FOUND;
- }
-
- if (bus == 0)
- *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
- else
- *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
- __get_pci_config(temp, QS_CONFIG_DATA, "lwz");
- offset ^= 0x02;
-
- sp = ((ushort *)&temp) + ((offset >> 1) & 1);
- *val = *sp;
- return SUCCESSFUL;
-}
-
-int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned int *val)
-{
- if ((bus > 7) || (dev_fn > 127)) {
- *val = 0xffffffff;
- return DEVICE_NOT_FOUND;
- }
- if (bus == 0)
- *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
- else
- *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
- __get_pci_config(*val, QS_CONFIG_DATA, "lwz");
- return SUCCESSFUL;
-}
-
-int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned char val)
-{
- uint temp;
- u_char *cp;
-
- if ((bus > 7) || (dev_fn > 127))
- return DEVICE_NOT_FOUND;
-
- qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
- offset ^= 0x03;
- cp = ((u_char *)&temp) + (offset & 0x03);
- *cp = val;
-
- if (bus == 0)
- *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
- else
- *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
- *QS_CONFIG_DATA = temp;
-
- return SUCCESSFUL;
-}
-
-int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned short val)
-{
- uint temp;
- ushort *sp;
-
- if ((bus > 7) || (dev_fn > 127))
- return DEVICE_NOT_FOUND;
-
- qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
- offset ^= 0x02;
- sp = ((ushort *)&temp) + ((offset >> 1) & 1);
- *sp = val;
-
- if (bus == 0)
- *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
- else
- *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
- *QS_CONFIG_DATA = temp;
-
- return SUCCESSFUL;
-}
-
-int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
- unsigned char offset, unsigned int val)
-{
- if ((bus > 7) || (dev_fn > 127))
- return DEVICE_NOT_FOUND;
-
- if (bus == 0)
- *QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
- else
- *QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
- *(unsigned int *)QS_CONFIG_DATA = val;
-
- return SUCCESSFUL;
-}
-
OpenPOWER on IntegriCloud