diff options
Diffstat (limited to 'arch/ppc/boot/simple/Makefile')
| -rw-r--r-- | arch/ppc/boot/simple/Makefile | 277 |
1 files changed, 0 insertions, 277 deletions
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile deleted file mode 100644 index 5b87779..0000000 --- a/arch/ppc/boot/simple/Makefile +++ /dev/null @@ -1,277 +0,0 @@ -# This is far from simple, but I couldn't think of a good name. This is -# for making the 'zImage' or 'zImage.initrd' on a number of targets. -# -# Author: Tom Rini <trini@mvista.com> -# -# Notes: -# (1) For machines that do not want to use the ELF image directly (including -# stripping just the ELF header off), they must set the variables -# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target -# that produces the desired image and they must set end-$(CONFIG_MACHINE) -# to what will be suffixed to the image filename. -# (2) Regardless of (1), to have the resulting image be something other -# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for -# the zImage, znetboot, and znetbootrd targets. -# (3) For machine targets which use the mktree program, you can optionally -# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be -# loaded at. The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link -# address. -# (4) It is advisable to pass in the memory size using BI_MEMSIZE and -# get_mem_size(), which is memory controller dependent. Add in the correct -# XXX_memory.o file for this to work, as well as editing the -# misc-$(CONFIG_MACHINE) variable. - -boot := arch/ppc/boot -common := $(boot)/common -utils := $(boot)/utils -bootlib := $(boot)/lib -images := $(boot)/images -of1275 := $(boot)/of1275 -tftpboot := /tftpboot - -# Normally, we use the 'misc.c' file for decompress_kernel and -# whatnot. Sometimes we need to override this however. -misc-y := misc.o - -# Normally, we have our images end in .elf, but something we want to -# change this. -end-y := elf - -# Additionally, we normally don't need to mess with the L2 / L3 caches -# if present on 'classic' PPC. -cacheflag-y := -DCLEAR_CACHES="" -# This file will flush / disable the L2, and L3 if present. -clear_L2_L3 := $(srctree)/$(boot)/simple/clear.S - -# -# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig -# for definition of what platform each config option refer to. -#---------------------------------------------------------------------------- - zimage-$(CONFIG_CPCI690) := zImage-STRIPELF -zimageinitrd-$(CONFIG_CPCI690) := zImage.initrd-STRIPELF - extra.o-$(CONFIG_CPCI690) := misc-cpci690.o - end-$(CONFIG_CPCI690) := cpci690 - cacheflag-$(CONFIG_CPCI690) := -include $(clear_L2_L3) - - zimage-$(CONFIG_IBM_OPENBIOS) := zImage-TREE -zimageinitrd-$(CONFIG_IBM_OPENBIOS) := zImage.initrd-TREE - end-$(CONFIG_IBM_OPENBIOS) := treeboot - misc-$(CONFIG_IBM_OPENBIOS) := misc-embedded.o - - end-$(CONFIG_EMBEDDEDBOOT) := embedded - misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o - - zimage-$(CONFIG_BAMBOO) := zImage-TREE -zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE - end-$(CONFIG_BAMBOO) := bamboo - entrypoint-$(CONFIG_BAMBOO) := 0x01000000 - extra.o-$(CONFIG_BAMBOO) := pibs.o - - zimage-$(CONFIG_BUBINGA) := zImage-TREE -zimageinitrd-$(CONFIG_BUBINGA) := zImage.initrd-TREE - end-$(CONFIG_BUBINGA) := bubinga - entrypoint-$(CONFIG_BUBINGA) := 0x01000000 - extra.o-$(CONFIG_BUBINGA) := openbios.o - - zimage-$(CONFIG_EBONY) := zImage-TREE -zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE - end-$(CONFIG_EBONY) := ebony - entrypoint-$(CONFIG_EBONY) := 0x01000000 - extra.o-$(CONFIG_EBONY) := openbios.o - - zimage-$(CONFIG_LUAN) := zImage-TREE -zimageinitrd-$(CONFIG_LUAN) := zImage.initrd-TREE - end-$(CONFIG_LUAN) := luan - entrypoint-$(CONFIG_LUAN) := 0x01000000 - extra.o-$(CONFIG_LUAN) := pibs.o - - zimage-$(CONFIG_YUCCA) := zImage-TREE -zimageinitrd-$(CONFIG_YUCCA) := zImage.initrd-TREE - end-$(CONFIG_YUCCA) := yucca - entrypoint-$(CONFIG_YUCCA) := 0x01000000 - extra.o-$(CONFIG_YUCCA) := pibs.o - - zimage-$(CONFIG_OCOTEA) := zImage-TREE -zimageinitrd-$(CONFIG_OCOTEA) := zImage.initrd-TREE - end-$(CONFIG_OCOTEA) := ocotea - entrypoint-$(CONFIG_OCOTEA) := 0x01000000 - extra.o-$(CONFIG_OCOTEA) := pibs.o - - zimage-$(CONFIG_SYCAMORE) := zImage-TREE -zimageinitrd-$(CONFIG_SYCAMORE) := zImage.initrd-TREE - end-$(CONFIG_SYCAMORE) := sycamore - entrypoint-$(CONFIG_SYCAMORE) := 0x01000000 - extra.o-$(CONFIG_SYCAMORE) := openbios.o - - zimage-$(CONFIG_WALNUT) := zImage-TREE -zimageinitrd-$(CONFIG_WALNUT) := zImage.initrd-TREE - end-$(CONFIG_WALNUT) := walnut - entrypoint-$(CONFIG_WALNUT) := 0x01000000 - extra.o-$(CONFIG_WALNUT) := openbios.o - - extra.o-$(CONFIG_EV64260) := misc-ev64260.o - end-$(CONFIG_EV64260) := ev64260 - cacheflag-$(CONFIG_EV64260) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_CHESTNUT) := misc-chestnut.o - end-$(CONFIG_CHESTNUT) := chestnut - - extra.o-$(CONFIG_KATANA) := misc-katana.o - end-$(CONFIG_KATANA) := katana - cacheflag-$(CONFIG_KATANA) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_RADSTONE_PPC7D) := misc-radstone_ppc7d.o - end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d - cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3) - - extra.o-$(CONFIG_EV64360) := misc-ev64360.o - end-$(CONFIG_EV64360) := ev64360 - cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3) - -# kconfig 'feature', only one of these will ever be 'y' at a time. -# The rest will be unset. -motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ -$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) -motorola := $(strip $(motorola)) - - zimage-$(motorola) := zImage-PPLUS -zimageinitrd-$(motorola) := zImage.initrd-PPLUS - end-$(motorola) := pplus - -# Overrides previous assingment - extra.o-$(CONFIG_PPLUS) := prepmap.o - extra.o-$(CONFIG_LOPEC) := mpc10x_memory.o - -# Really only valid if CONFIG_6xx=y - zimage-$(CONFIG_PPC_PREP) := zImage-PPLUS -zimageinitrd-$(CONFIG_PPC_PREP) := zImage.initrd-PPLUS -ifeq ($(CONFIG_6xx),y) - extra.o-$(CONFIG_PPC_PREP) := prepmap.o - misc-$(CONFIG_PPC_PREP) += misc-prep.o mpc10x_memory.o -endif - end-$(CONFIG_PPC_PREP) := prep - - end-$(CONFIG_SANDPOINT) := sandpoint - cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) - - zimage-$(CONFIG_SPRUCE) := zImage-TREE -zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE - end-$(CONFIG_SPRUCE) := spruce - entrypoint-$(CONFIG_SPRUCE) := 0x00800000 - misc-$(CONFIG_SPRUCE) += misc-spruce.o - - zimage-$(CONFIG_LITE5200) := zImage-STRIPELF -zimageinitrd-$(CONFIG_LITE5200) := zImage.initrd-STRIPELF - end-$(CONFIG_LITE5200) := lite5200 - cacheflag-$(CONFIG_LITE5200) := -include $(clear_L2_L3) - - -# SMP images should have a '.smp' suffix. - end-$(CONFIG_SMP) := $(end-y).smp - -# This is a treeboot that needs init functions until the -# boot rom is sorted out (i.e. this is short lived) -EXTRA_AFLAGS := $(extra-aflags-y) -# head.o needs to get the cacheflags defined. -AFLAGS_head.o += $(cacheflag-y) - -# Linker args. This specifies where the image will be run at. -LD_ARGS := -T $(srctree)/$(boot)/ld.script \ - -Ttext $(CONFIG_BOOT_LOAD) -Bstatic -OBJCOPY_ARGS := -O elf32-powerpc - -# head.o and relocate.o must be at the start. -boot-y := head.o relocate.o $(extra.o-y) $(misc-y) -boot-$(CONFIG_REDWOOD_5) += embed_config.o -boot-$(CONFIG_REDWOOD_6) += embed_config.o -boot-$(CONFIG_8xx) += embed_config.o -boot-$(CONFIG_8260) += embed_config.o -boot-$(CONFIG_EP405) += embed_config.o -boot-$(CONFIG_XILINX_ML300) += embed_config.o -boot-$(CONFIG_XILINX_ML403) += embed_config.o -boot-$(CONFIG_BSEIP) += iic.o -boot-$(CONFIG_MBX) += iic.o pci.o qspan_pci.o -boot-$(CONFIG_MV64X60) += misc-mv64x60.o -boot-$(CONFIG_RPXCLASSIC) += iic.o pci.o qspan_pci.o -boot-$(CONFIG_RPXLITE) += iic.o -# Different boards need different serial implementations. -ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y) -boot-$(CONFIG_8xx) += m8xx_tty.o -boot-$(CONFIG_8260) += m8260_tty.o -endif -boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o -boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o -boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE) += uartlite_tty.o - -LIBS := $(common)/lib.a $(bootlib)/lib.a -ifeq ($(CONFIG_PPC_PREP),y) -LIBS += $(of1275)/lib.a -endif - -OBJS := $(addprefix $(obj)/,$(boot-y)) - -# Tools -MKBUGBOOT := $(utils)/mkbugboot -MKPREP := $(utils)/mkprep -MKTREE := $(utils)/mktree - -targets := dummy.o - -$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ - $(images)/vmlinux.gz $(obj)/dummy.o - $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(obj)/dummy.o $(obj)/image.o - $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) - $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr -R .ramdisk - -$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \ - $(images)/vmlinux.gz $(obj)/dummy.o - $(OBJCOPY) $(OBJCOPY_ARGS) \ - --add-section=.ramdisk=$(images)/ramdisk.image.gz \ - --set-section-flags=.ramdisk=contents,alloc,load,readonly,data \ - --add-section=.image=$(images)/vmlinux.gz \ - --set-section-flags=.image=contents,alloc,load,readonly,data \ - $(obj)/dummy.o $(obj)/image.o - $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS) - $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \ - -R .stabstr - -# Sort-of dummy rules, that let us format the image we want. -zImage: $(images)/$(zimage-y) $(obj)/zvmlinux - cp -f $(obj)/zvmlinux $(images)/zImage.elf - rm -f $(obj)/zvmlinux - -zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd - cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf - rm -f $(obj)/zvmlinux.initrd - -znetboot: zImage - cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y) - -znetboot.initrd: zImage.initrd - cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y) - -$(images)/zImage-STRIPELF: $(obj)/zvmlinux - dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k - -$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd - dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \ - skip=64 bs=1k - -$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE) - $(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y) - -$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE) - $(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \ - $(entrypoint-y) - -$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT) - $(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y) - $(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot - -$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT) - $(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) - $(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot |
