summaryrefslogtreecommitdiffstats
path: root/arch/ppc/8xx_io/fec.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/8xx_io/fec.c')
-rw-r--r--arch/ppc/8xx_io/fec.c1983
1 files changed, 0 insertions, 1983 deletions
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
deleted file mode 100644
index 2c604d4..0000000
--- a/arch/ppc/8xx_io/fec.c
+++ /dev/null
@@ -1,1983 +0,0 @@
-/*
- * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver. The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
- * Includes support for the following PHYs: QS6612, LXT970, LXT971/2.
- *
- * Right now, I am very wasteful with the buffers. I allocate memory
- * pages and then divide them into 2K frame buffers. This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- * Much better multiple PHY support by Magnus Damm.
- * Copyright (c) 2000 Ericsson Radio Systems AB.
- *
- * Make use of MII for PHY control configurable.
- * Some fixes.
- * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering.
- *
- * Support for AMD AM79C874 added.
- * Thomas Lange, thomas@corelatus.com
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#ifdef CONFIG_FEC_PACKETHOOK
-#include <linux/pkthook.h>
-#endif
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-#ifdef CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs
-*/
-
-typedef struct {
- uint mii_data;
- void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
- uint id;
- char *name;
-
- const phy_cmd_t *config;
- const phy_cmd_t *startup;
- const phy_cmd_t *ack_int;
- const phy_cmd_t *shutdown;
-} phy_info_t;
-#endif /* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers. These are allocated from the page
- * pool. The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter. We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define FEC_ENET_RX_PAGES 16
-#define FEC_ENET_RX_FRSIZE 2048
-#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE 16 /* Must be power of two */
-#define TX_RING_MOD_MASK 15 /* for this to work */
-#else
-#define FEC_ENET_RX_PAGES 4
-#define FEC_ENET_RX_FRSIZE 2048
-#define FEC_ENET_RX_FRPPG (PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE 8 /* Must be power of two */
-#define TX_RING_MOD_MASK 7 /* for this to work */
-#endif
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-
-/*
-*/
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-/* Delay to wait for FEC reset command to complete (in us)
-*/
-#define FEC_RESET_DELAY 50
-
-/* The FEC stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-/* The FEC buffer descriptors track the ring buffers. The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors. The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller. The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions. The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fec_enet_private {
- /* The saved address of a sent-in-place packet/buffer, for skfree(). */
- struct sk_buff* tx_skbuff[TX_RING_SIZE];
- ushort skb_cur;
- ushort skb_dirty;
-
- /* CPM dual port RAM relative addresses.
- */
- cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */
- cbd_t *tx_bd_base;
- cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
- cbd_t *dirty_tx; /* The ring entries to be free()ed. */
-
- /* Virtual addresses for the receive buffers because we can't
- * do a __va() on them anymore.
- */
- unsigned char *rx_vaddr[RX_RING_SIZE];
-
- struct net_device_stats stats;
- uint tx_full;
- spinlock_t lock;
-
-#ifdef CONFIG_USE_MDIO
- uint phy_id;
- uint phy_id_done;
- uint phy_status;
- uint phy_speed;
- phy_info_t *phy;
- struct work_struct phy_task;
- struct net_device *dev;
-
- uint sequence_done;
-
- uint phy_addr;
-#endif /* CONFIG_USE_MDIO */
-
- int link;
- int old_link;
- int full_duplex;
-
-#ifdef CONFIG_FEC_PACKETHOOK
- unsigned long ph_lock;
- fec_ph_func *ph_rxhandler;
- fec_ph_func *ph_txhandler;
- __u16 ph_proto;
- volatile __u32 *ph_regaddr;
- void *ph_priv;
-#endif
-};
-
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-#ifdef CONFIG_USE_MDIO
-static void fec_enet_mii(struct net_device *dev);
-#endif /* CONFIG_USE_MDIO */
-#ifdef CONFIG_FEC_PACKETHOOK
-static void fec_enet_tx(struct net_device *dev, __u32 regval);
-static void fec_enet_rx(struct net_device *dev, __u32 regval);
-#else
-static void fec_enet_tx(struct net_device *dev);
-static void fec_enet_rx(struct net_device *dev);
-#endif
-static int fec_enet_close(struct net_device *dev);
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void fec_restart(struct net_device *dev, int duplex);
-static void fec_stop(struct net_device *dev);
-static ushort my_enet_addr[3];
-
-#ifdef CONFIG_USE_MDIO
-/* MII processing. We keep this as simple as possible. Requests are
- * placed on the list (if there is room). When the request is finished
- * by the MII, an optional function may be called.
- */
-typedef struct mii_list {
- uint mii_regval;
- void (*mii_func)(uint val, struct net_device *dev);
- struct mii_list *mii_next;
-} mii_list_t;
-
-#define NMII 20
-mii_list_t mii_cmds[NMII];
-mii_list_t *mii_free;
-mii_list_t *mii_head;
-mii_list_t *mii_tail;
-
-static int mii_queue(struct net_device *dev, int request,
- void (*func)(uint, struct net_device *));
-
-/* Make MII read/write commands for the FEC.
-*/
-#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18))
-#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-#define mk_mii_end 0
-#endif /* CONFIG_USE_MDIO */
-
-/* Transmitter timeout.
-*/
-#define TX_TIMEOUT (2*HZ)
-
-#ifdef CONFIG_USE_MDIO
-/* Register definitions for the PHY.
-*/
-
-#define MII_REG_CR 0 /* Control Register */
-#define MII_REG_SR 1 /* Status Register */
-#define MII_REG_PHYIR1 2 /* PHY Identification Register 1 */
-#define MII_REG_PHYIR2 3 /* PHY Identification Register 2 */
-#define MII_REG_ANAR 4 /* A-N Advertisement Register */
-#define MII_REG_ANLPAR 5 /* A-N Link Partner Ability Register */
-#define MII_REG_ANER 6 /* A-N Expansion Register */
-#define MII_REG_ANNPTR 7 /* A-N Next Page Transmit Register */
-#define MII_REG_ANLPRNPR 8 /* A-N Link Partner Received Next Page Reg. */
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */
-#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */
-#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */
-#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */
-#define PHY_STAT_SPMASK 0xf000 /* mask for speed */
-#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */
-#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */
-#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */
-#endif /* CONFIG_USE_MDIO */
-
-#ifdef CONFIG_FEC_PACKETHOOK
-int
-fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun,
- __u16 proto, volatile __u32 *regaddr, void *priv)
-{
- struct fec_enet_private *fep;
- int retval = 0;
-
- fep = dev->priv;
-
- if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
- /* Someone is messing with the packet hook */
- return -EAGAIN;
- }
- if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) {
- retval = -EBUSY;
- goto out;
- }
- fep->ph_rxhandler = rxfun;
- fep->ph_txhandler = txfun;
- fep->ph_proto = proto;
- fep->ph_regaddr = regaddr;
- fep->ph_priv = priv;
-
- out:
- fep->ph_lock = 0;
-
- return retval;
-}
-
-
-int
-fec_unregister_ph(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int retval = 0;
-
- fep = dev->priv;
-
- if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
- /* Someone is messing with the packet hook */
- return -EAGAIN;
- }
-
- fep->ph_rxhandler = fep->ph_txhandler = NULL;
- fep->ph_proto = 0;
- fep->ph_regaddr = NULL;
- fep->ph_priv = NULL;
-
- fep->ph_lock = 0;
-
- return retval;
-}
-
-EXPORT_SYMBOL(fec_register_ph);
-EXPORT_SYMBOL(fec_unregister_ph);
-
-#endif /* CONFIG_FEC_PACKETHOOK */
-
-static int
-fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct fec_enet_private *fep;
- volatile fec_t *fecp;
- volatile cbd_t *bdp;
-
- fep = dev->priv;
- fecp = (volatile fec_t*)dev->base_addr;
-
- if (!fep->link) {
- /* Link is down or autonegotiation is in progress. */
- return 1;
- }
-
- /* Fill in a Tx ring entry */
- bdp = fep->cur_tx;
-
-#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY) {
- /* Ooops. All transmit buffers are full. Bail out.
- * This should not happen, since dev->tbusy should be set.
- */
- printk("%s: tx queue full!.\n", dev->name);
- return 1;
- }
-#endif
-
- /* Clear all of the status flags.
- */
- bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
- /* Set buffer length and buffer pointer.
- */
- bdp->cbd_bufaddr = __pa(skb->data);
- bdp->cbd_datlen = skb->len;
-
- /* Save skb pointer.
- */
- fep->tx_skbuff[fep->skb_cur] = skb;
-
- fep->stats.tx_bytes += skb->len;
- fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
- /* Push the data cache so the CPM does not get stale memory
- * data.
- */
- flush_dcache_range((unsigned long)skb->data,
- (unsigned long)skb->data + skb->len);
-
- /* disable interrupts while triggering transmit */
- spin_lock_irq(&fep->lock);
-
- /* Send it on its way. Tell FEC its ready, interrupt when done,
- * its the last BD of the frame, and to put the CRC on the end.
- */
-
- bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
- | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
- dev->trans_start = jiffies;
-
- /* Trigger transmission start */
- fecp->fec_x_des_active = 0x01000000;
-
- /* If this was the last BD in the ring, start at the beginning again.
- */
- if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
- bdp = fep->tx_bd_base;
- } else {
- bdp++;
- }
-
- if (bdp->cbd_sc & BD_ENET_TX_READY) {
- netif_stop_queue(dev);
- fep->tx_full = 1;
- }
-
- fep->cur_tx = (cbd_t *)bdp;
-
- spin_unlock_irq(&fep->lock);
-
- return 0;
-}
-
-static void
-fec_timeout(struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
-
- printk("%s: transmit timed out.\n", dev->name);
- fep->stats.tx_errors++;
-#ifndef final_version
- {
- int i;
- cbd_t *bdp;
-
- printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
- (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
- (unsigned long)fep->dirty_tx,
- (unsigned long)fep->cur_rx);
-
- bdp = fep->tx_bd_base;
- printk(" tx: %u buffers\n", TX_RING_SIZE);
- for (i = 0 ; i < TX_RING_SIZE; i++) {
- printk(" %08x: %04x %04x %08x\n",
- (uint) bdp,
- bdp->cbd_sc,
- bdp->cbd_datlen,
- bdp->cbd_bufaddr);
- bdp++;
- }
-
- bdp = fep->rx_bd_base;
- printk(" rx: %lu buffers\n", RX_RING_SIZE);
- for (i = 0 ; i < RX_RING_SIZE; i++) {
- printk(" %08x: %04x %04x %08x\n",
- (uint) bdp,
- bdp->cbd_sc,
- bdp->cbd_datlen,
- bdp->cbd_bufaddr);
- bdp++;
- }
- }
-#endif
- if (!fep->tx_full)
- netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the MPC core interrupt.
- */
-static irqreturn_t
-fec_enet_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- volatile fec_t *fecp;
- uint int_events;
-#ifdef CONFIG_FEC_PACKETHOOK
- struct fec_enet_private *fep = dev->priv;
- __u32 regval;
-
- if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
- fecp = (volatile fec_t*)dev->base_addr;
-
- /* Get the interrupt events that caused us to be here.
- */
- while ((int_events = fecp->fec_ievent) != 0) {
- fecp->fec_ievent = int_events;
- if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR |
- FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) {
- printk("FEC ERROR %x\n", int_events);
- }
-
- /* Handle receive event in its own function.
- */
- if (int_events & FEC_ENET_RXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
- fec_enet_rx(dev, regval);
-#else
- fec_enet_rx(dev);
-#endif
- }
-
- /* Transmit OK, or non-fatal error. Update the buffer
- descriptors. FEC handles all errors, we just discover
- them as part of the transmit process.
- */
- if (int_events & FEC_ENET_TXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
- fec_enet_tx(dev, regval);
-#else
- fec_enet_tx(dev);
-#endif
- }
-
- if (int_events & FEC_ENET_MII) {
-#ifdef CONFIG_USE_MDIO
- fec_enet_mii(dev);
-#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
-#endif /* CONFIG_USE_MDIO */
- }
-
- }
- return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_tx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_tx(struct net_device *dev)
-#endif
-{
- struct fec_enet_private *fep;
- volatile cbd_t *bdp;
- struct sk_buff *skb;
-
- fep = dev->priv;
- /* lock while transmitting */
- spin_lock(&fep->lock);
- bdp = fep->dirty_tx;
-
- while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
- if (bdp == fep->cur_tx && fep->tx_full == 0) break;
-
- skb = fep->tx_skbuff[fep->skb_dirty];
- /* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
- BD_ENET_TX_RL | BD_ENET_TX_UN |
- BD_ENET_TX_CSL)) {
- fep->stats.tx_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_HB) /* No heartbeat */
- fep->stats.tx_heartbeat_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_LC) /* Late collision */
- fep->stats.tx_window_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_RL) /* Retrans limit */
- fep->stats.tx_aborted_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_UN) /* Underrun */
- fep->stats.tx_fifo_errors++;
- if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
- fep->stats.tx_carrier_errors++;
- } else {
-#ifdef CONFIG_FEC_PACKETHOOK
- /* Packet hook ... */
- if (fep->ph_txhandler &&
- ((struct ethhdr *)skb->data)->h_proto
- == fep->ph_proto) {
- fep->ph_txhandler((__u8*)skb->data, skb->len,
- regval, fep->ph_priv);
- }
-#endif
- fep->stats.tx_packets++;
- }
-
-#ifndef final_version
- if (bdp->cbd_sc & BD_ENET_TX_READY)
- printk("HEY! Enet xmit interrupt and TX_READY.\n");
-#endif
- /* Deferred means some collisions occurred during transmit,
- * but we eventually sent the packet OK.
- */
- if (bdp->cbd_sc & BD_ENET_TX_DEF)
- fep->stats.collisions++;
-
- /* Free the sk buffer associated with this last transmit.
- */
-#if 0
-printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty);
-#endif
- dev_kfree_skb_irq (skb/*, FREE_WRITE*/);
- fep->tx_skbuff[fep->skb_dirty] = NULL;
- fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
- /* Update pointer to next buffer descriptor to be transmitted.
- */
- if (bdp->cbd_sc & BD_ENET_TX_WRAP)
- bdp = fep->tx_bd_base;
- else
- bdp++;
-
- /* Since we have freed up a buffer, the ring is no longer
- * full.
- */
- if (fep->tx_full) {
- fep->tx_full = 0;
- if (netif_queue_stopped(dev))
- netif_wake_queue(dev);
- }
-#ifdef CONFIG_FEC_PACKETHOOK
- /* Re-read register. Not exactly guaranteed to be correct,
- but... */
- if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
- }
- fep->dirty_tx = (cbd_t *)bdp;
- spin_unlock(&fep->lock);
-}
-
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_rx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_rx(struct net_device *dev)
-#endif
-{
- struct fec_enet_private *fep;
- volatile fec_t *fecp;
- volatile cbd_t *bdp;
- struct sk_buff *skb;
- ushort pkt_len;
- __u8 *data;
-
- fep = dev->priv;
- fecp = (volatile fec_t*)dev->base_addr;
-
- /* First, grab all of the stats for the incoming packet.
- * These get messed up if we get called due to a busy condition.
- */
- bdp = fep->cur_rx;
-
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
-
-#ifndef final_version
- /* Since we have allocated space to hold a complete frame,
- * the last indicator should be set.
- */
- if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
- printk("FEC ENET: rcv is not +last\n");
-#endif
-
- /* Check for errors. */
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
- BD_ENET_RX_CR | BD_ENET_RX_OV)) {
- fep->stats.rx_errors++;
- if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
- /* Frame too long or too short. */
- fep->stats.rx_length_errors++;
- }
- if (bdp->cbd_sc & BD_ENET_RX_NO) /* Frame alignment */
- fep->stats.rx_frame_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_CR) /* CRC Error */
- fep->stats.rx_crc_errors++;
- if (bdp->cbd_sc & BD_ENET_RX_OV) /* FIFO overrun */
- fep->stats.rx_crc_errors++;
- }
-
- /* Report late collisions as a frame error.
- * On this error, the BD is closed, but we don't know what we
- * have in the buffer. So, just drop this frame on the floor.
- */
- if (bdp->cbd_sc & BD_ENET_RX_CL) {
- fep->stats.rx_errors++;
- fep->stats.rx_frame_errors++;
- goto rx_processing_done;
- }
-
- /* Process the incoming frame.
- */
- fep->stats.rx_packets++;
- pkt_len = bdp->cbd_datlen;
- fep->stats.rx_bytes += pkt_len;
- data = fep->rx_vaddr[bdp - fep->rx_bd_base];
-
-#ifdef CONFIG_FEC_PACKETHOOK
- /* Packet hook ... */
- if (fep->ph_rxhandler) {
- if (((struct ethhdr *)data)->h_proto == fep->ph_proto) {
- switch (fep->ph_rxhandler(data, pkt_len, regval,
- fep->ph_priv)) {
- case 1:
- goto rx_processing_done;
- break;
- case 0:
- break;
- default:
- fep->stats.rx_errors++;
- goto rx_processing_done;
- }
- }
- }
-
- /* If it wasn't filtered - copy it to an sk buffer. */
-#endif
-
- /* This does 16 byte alignment, exactly what we need.
- * The packet length includes FCS, but we don't want to
- * include that when passing upstream as it messes up
- * bridging applications.
- */
- skb = dev_alloc_skb(pkt_len-4);
-
- if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
- fep->stats.rx_dropped++;
- } else {
- skb_put(skb,pkt_len-4); /* Make room */
- skb_copy_to_linear_data(skb, data, pkt_len-4);
- skb->protocol=eth_type_trans(skb,dev);
- netif_rx(skb);
- }
- rx_processing_done:
-
- /* Clear the status flags for this buffer.
- */
- bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
- /* Mark the buffer empty.
- */
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
- /* Update BD pointer to next entry.
- */
- if (bdp->cbd_sc & BD_ENET_RX_WRAP)
- bdp = fep->rx_bd_base;
- else
- bdp++;
-
-#if 1
- /* Doing this here will keep the FEC running while we process
- * incoming frames. On a heavily loaded network, we should be
- * able to keep up at the expense of system resources.
- */
- fecp->fec_r_des_active = 0x01000000;
-#endif
-#ifdef CONFIG_FEC_PACKETHOOK
- /* Re-read register. Not exactly guaranteed to be correct,
- but... */
- if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
- } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
- fep->cur_rx = (cbd_t *)bdp;
-
-#if 0
- /* Doing this here will allow us to process all frames in the
- * ring before the FEC is allowed to put more there. On a heavily
- * loaded network, some frames may be lost. Unfortunately, this
- * increases the interrupt overhead since we can potentially work
- * our way back to the interrupt return only to come right back
- * here.
- */
- fecp->fec_r_des_active = 0x01000000;
-#endif
-}
-
-
-#ifdef CONFIG_USE_MDIO
-static void
-fec_enet_mii(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- volatile fec_t *ep;
- mii_list_t *mip;
- uint mii_reg;
-
- fep = (struct fec_enet_private *)dev->priv;
- ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
- mii_reg = ep->fec_mii_data;
-
- if ((mip = mii_head) == NULL) {
- printk("MII and no head!\n");
- return;
- }
-
- if (mip->mii_func != NULL)
- (*(mip->mii_func))(mii_reg, dev);
-
- mii_head = mip->mii_next;
- mip->mii_next = mii_free;
- mii_free = mip;
-
- if ((mip = mii_head) != NULL) {
- ep->fec_mii_data = mip->mii_regval;
-
- }
-}
-
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
- struct fec_enet_private *fep;
- unsigned long flags;
- mii_list_t *mip;
- int retval;
-
- /* Add PHY address to register command.
- */
- fep = dev->priv;
- regval |= fep->phy_addr << 23;
-
- retval = 0;
-
- /* lock while modifying mii_list */
- spin_lock_irqsave(&fep->lock, flags);
-
- if ((mip = mii_free) != NULL) {
- mii_free = mip->mii_next;
- mip->mii_regval = regval;
- mip->mii_func = func;
- mip->mii_next = NULL;
- if (mii_head) {
- mii_tail->mii_next = mip;
- mii_tail = mip;
- } else {
- mii_head = mii_tail = mip;
- (&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval;
- }
- } else {
- retval = 1;
- }
-
- spin_unlock_irqrestore(&fep->lock, flags);
-
- return(retval);
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
- int k;
-
- if(!c)
- return;
-
- for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
- mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
- if (mii_reg & 0x0004)
- *s |= PHY_STAT_LINK;
- if (mii_reg & 0x0010)
- *s |= PHY_STAT_FAULT;
- if (mii_reg & 0x0020)
- *s |= PHY_STAT_ANC;
-
- fep->link = (*s & PHY_STAT_LINK) ? 1 : 0;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
- if (mii_reg & 0x1000)
- *s |= PHY_CONF_ANE;
- if (mii_reg & 0x4000)
- *s |= PHY_CONF_LOOP;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_CONF_SPMASK);
-
- if (mii_reg & 0x0020)
- *s |= PHY_CONF_10HDX;
- if (mii_reg & 0x0040)
- *s |= PHY_CONF_10FDX;
- if (mii_reg & 0x0080)
- *s |= PHY_CONF_100HDX;
- if (mii_reg & 0x00100)
- *s |= PHY_CONF_100FDX;
-}
-#if 0
-static void mii_disp_reg(uint mii_reg, struct net_device *dev)
-{
- printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff);
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards */
-
-#ifdef CONFIG_FEC_LXT970
-
-#define MII_LXT970_MIRROR 16 /* Mirror register */
-#define MII_LXT970_IER 17 /* Interrupt Enable Register */
-#define MII_LXT970_ISR 18 /* Interrupt Status Register */
-#define MII_LXT970_CONFIG 19 /* Configuration Register */
-#define MII_LXT970_CSR 20 /* Chip Status Register */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_STAT_SPMASK);
-
- if (mii_reg & 0x0800) {
- if (mii_reg & 0x1000)
- *s |= PHY_STAT_100FDX;
- else
- *s |= PHY_STAT_100HDX;
- }
- else {
- if (mii_reg & 0x1000)
- *s |= PHY_STAT_10FDX;
- else
- *s |= PHY_STAT_10HDX;
- }
-}
-
-static phy_info_t phy_info_lxt970 = {
- 0x07810000,
- "LXT970",
-
- (const phy_cmd_t []) { /* config */
-#if 0
-// { mk_mii_write(MII_REG_ANAR, 0x0021), NULL },
-
- /* Set default operation of 100-TX....for some reason
- * some of these bits are set on power up, which is wrong.
- */
- { mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
- /* read SR and ISR to acknowledge */
-
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_LXT970_ISR), NULL },
-
- /* find out the current status */
-
- { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards */
-
-#ifdef CONFIG_FEC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR 16 /* Port Control Register */
-#define MII_LXT971_SR2 17 /* Status Register 2 */
-#define MII_LXT971_IER 18 /* Interrupt Enable Register */
-#define MII_LXT971_ISR 19 /* Interrupt Status Register */
-#define MII_LXT971_LCR 20 /* LED Control Register */
-#define MII_LXT971_TCR 30 /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_STAT_SPMASK);
-
- if (mii_reg & 0x4000) {
- if (mii_reg & 0x0200)
- *s |= PHY_STAT_100FDX;
- else
- *s |= PHY_STAT_100HDX;
- }
- else {
- if (mii_reg & 0x0200)
- *s |= PHY_STAT_10FDX;
- else
- *s |= PHY_STAT_10HDX;
- }
- if (mii_reg & 0x0008)
- *s |= PHY_STAT_FAULT;
-}
-
-static phy_info_t phy_info_lxt971 = {
- 0x0001378e,
- "LXT971",
-
- (const phy_cmd_t []) { /* config */
-// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-
- /* Somehow does the 971 tell me that the link is down
- * the first read after power-up.
- * read here to get a valid value in ack_int */
-
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
- /* find out the current status */
-
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
- /* we only need to read ISR to acknowledge */
-
- { mk_mii_read(MII_LXT971_ISR), NULL },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF */
-
-#ifdef CONFIG_FEC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR 17 /* Mode Control Register */
-#define MII_QS6612_FTR 27 /* Factory Test Register */
-#define MII_QS6612_MCO 28 /* Misc. Control Register */
-#define MII_QS6612_ISR 29 /* Interrupt Source Register */
-#define MII_QS6612_IMR 30 /* Interrupt Mask Register */
-#define MII_QS6612_PCR 31 /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- *s &= ~(PHY_STAT_SPMASK);
-
- switch((mii_reg >> 2) & 7) {
- case 1: *s |= PHY_STAT_10HDX; break;
- case 2: *s |= PHY_STAT_100HDX; break;
- case 5: *s |= PHY_STAT_10FDX; break;
- case 6: *s |= PHY_STAT_100FDX; break;
- }
-}
-
-static phy_info_t phy_info_qs6612 = {
- 0x00181440,
- "QS6612",
-
- (const phy_cmd_t []) { /* config */
-// { mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10 Mbps */
-
- /* The PHY powers up isolated on the RPX,
- * so send a command to allow operation.
- */
-
- { mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
- /* parse cr and anar to get some info */
-
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
-
- /* we need to read ISR, SR and ANER to acknowledge */
-
- { mk_mii_read(MII_QS6612_ISR), NULL },
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_REG_ANER), NULL },
-
- /* read pcr to get info */
-
- { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-#endif /* CONFIG_FEC_QS6612 */
-
-/* ------------------------------------------------------------------------- */
-/* The Advanced Micro Devices AM79C874 is used on the ICU862 */
-
-#ifdef CONFIG_FEC_AM79C874
-
-/* register definitions for the 79C874 */
-
-#define MII_AM79C874_MFR 16 /* Miscellaneous Features Register */
-#define MII_AM79C874_ICSR 17 /* Interrupt Control/Status Register */
-#define MII_AM79C874_DR 18 /* Diagnostic Register */
-#define MII_AM79C874_PMLR 19 /* Power Management & Loopback Register */
-#define MII_AM79C874_MCR 21 /* Mode Control Register */
-#define MII_AM79C874_DC 23 /* Disconnect Counter */
-#define MII_AM79C874_REC 24 /* Receiver Error Counter */
-
-static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data)
-{
- volatile struct fec_enet_private *fep = dev->priv;
- uint s = fep->phy_status;
-
- s &= ~(PHY_STAT_SPMASK);
-
- /* Register 18: Bit 10 is data rate, 11 is Duplex */
- switch ((mii_reg >> 10) & 3) {
- case 0: s |= PHY_STAT_10HDX; break;
- case 1: s |= PHY_STAT_100HDX; break;
- case 2: s |= PHY_STAT_10FDX; break;
- case 3: s |= PHY_STAT_100FDX; break;
- }
-
- fep->phy_status = s;
-}
-
-static phy_info_t phy_info_amd79c874 = {
- 0x00022561,
- "AM79C874",
-
- (const phy_cmd_t []) { /* config */
-// { mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10 Mbps, HD */
- { mk_mii_read(MII_REG_CR), mii_parse_cr },
- { mk_mii_read(MII_REG_ANAR), mii_parse_anar },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* startup - enable interrupts */
- { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
- { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* ack_int */
- /* find out the current status */
-
- { mk_mii_read(MII_REG_SR), mii_parse_sr },
- { mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr },
-
- /* we only need to read ICSR to acknowledge */
-
- { mk_mii_read(MII_AM79C874_ICSR), NULL },
- { mk_mii_end, }
- },
- (const phy_cmd_t []) { /* shutdown - disable interrupts */
- { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
- { mk_mii_end, }
- },
-};
-
-#endif /* CONFIG_FEC_AM79C874 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FEC_LXT970
- &phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FEC_LXT971
- &phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FEC_QS6612
- &phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FEC_AM79C874
- &phy_info_amd79c874,
-#endif /* CONFIG_FEC_AM79C874 */
-
- NULL
-};
-
-static void mii_display_status(struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
- volatile uint *s = &(fep->phy_status);
-
- if (!fep->link && !fep->old_link) {
- /* Link is still down - don't print anything */
- return;
- }
-
- printk("%s: status: ", dev->name);
-
- if (!fep->link) {
- printk("link down");
- } else {
- printk("link up");
-
- switch(*s & PHY_STAT_SPMASK) {
- case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
- case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
- case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break;
- case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break;
- default:
- printk(", Unknown speed/duplex");
- }
-
- if (*s & PHY_STAT_ANC)
- printk(", auto-negotiation complete");
- }
-
- if (*s & PHY_STAT_FAULT)
- printk(", remote fault");
-
- printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
- struct fec_enet_private *fep =
- container_of(work, struct fec_enet_private, phy_task);
- struct net_device *dev = fep->dev;
- volatile uint *s = &(fep->phy_status);
-
- printk("%s: config: auto-negotiation ", dev->name);
-
- if (*s & PHY_CONF_ANE)
- printk("on");
- else
- printk("off");
-
- if (*s & PHY_CONF_100FDX)
- printk(", 100FDX");
- if (*s & PHY_CONF_100HDX)
- printk(", 100HDX");
- if (*s & PHY_CONF_10FDX)
- printk(", 10FDX");
- if (*s & PHY_CONF_10HDX)
- printk(", 10HDX");
- if (!(*s & PHY_CONF_SPMASK))
- printk(", No speed/duplex selected?");
-
- if (*s & PHY_CONF_LOOP)
- printk(", loopback enabled");
-
- printk(".\n");
-
- fep->sequence_done = 1;
-}
-
-static void mii_relink(struct work_struct *work)
-{
- struct fec_enet_private *fep =
- container_of(work, struct fec_enet_private, phy_task);
- struct net_device *dev = fep->dev;
- int duplex;
-
- fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
- mii_display_status(dev);
- fep->old_link = fep->link;
-
- if (fep->link) {
- duplex = 0;
- if (fep->phy_status
- & (PHY_STAT_100FDX | PHY_STAT_10FDX))
- duplex = 1;
- fec_restart(dev, duplex);
- }
- else
- fec_stop(dev);
-
-#if 0
- enable_irq(fep->mii_irq);
-#endif
-
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
-
- fep->dev = dev;
- INIT_WORK(&fep->phy_task, mii_relink);
- schedule_work(&fep->phy_task);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
-
- fep->dev = dev;
- INIT_WORK(&fep->phy_task, mii_display_config);
- schedule_work(&fep->phy_task);
-}
-
-
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink },
- { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config },
- { mk_mii_end, } };
-
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int i;
-
- fep = dev->priv;
- fep->phy_id |= (mii_reg & 0xffff);
-
- for(i = 0; phy_info[i]; i++)
- if(phy_info[i]->id == (fep->phy_id >> 4))
- break;
-
- if(!phy_info[i])
- panic("%s: PHY id 0x%08x is not supported!\n",
- dev->name, fep->phy_id);
-
- fep->phy = phy_info[i];
- fep->phy_id_done = 1;
-
- printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
- dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID. This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
- struct fec_enet_private *fep;
- uint phytype;
-
- fep = dev->priv;
-
- if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
- /* Got first part of ID, now get remainder.
- */
- fep->phy_id = phytype << 16;
- mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3);
- } else {
- fep->phy_addr++;
- if (fep->phy_addr < 32) {
- mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
- mii_discover_phy);
- } else {
- printk("fec: No PHY device found.\n");
- }
- }
-}
-#endif /* CONFIG_USE_MDIO */
-
-/* This interrupt occurs when the PHY detects a link change.
-*/
-static
-#ifdef CONFIG_RPXCLASSIC
-void mii_link_interrupt(void *dev_id)
-#else
-irqreturn_t mii_link_interrupt(int irq, void * dev_id)
-#endif
-{
-#ifdef CONFIG_USE_MDIO
- struct net_device *dev = dev_id;
- struct fec_enet_private *fep = dev->priv;
- volatile immap_t *immap = (immap_t *)IMAP_ADDR;
- volatile fec_t *fecp = &(immap->im_cpm.cp_fec);
- unsigned int ecntrl = fecp->fec_ecntrl;
-
- /* We need the FEC enabled to access the MII
- */
- if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
- fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN;
- }
-#endif /* CONFIG_USE_MDIO */
-
-#if 0
- disable_irq(fep->mii_irq); /* disable now, enable later */
-#endif
-
-
-#ifdef CONFIG_USE_MDIO
- mii_do_cmd(dev, fep->phy->ack_int);
- mii_do_cmd(dev, phy_cmd_relink); /* restart and display status */
-
- if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
- fecp->fec_ecntrl = ecntrl; /* restore old settings */
- }
-#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
-#endif /* CONFIG_USE_MDIO */
-
-#ifndef CONFIG_RPXCLASSIC
- return IRQ_RETVAL(IRQ_HANDLED);
-#endif /* CONFIG_RPXCLASSIC */
-}
-
-static int
-fec_enet_open(struct net_device *dev)
-{
- struct fec_enet_private *fep = dev->priv;
-
- /* I should reset the ring buffers here, but I don't yet know
- * a simple way to do that.
- */
-
-#ifdef CONFIG_USE_MDIO
- fep->sequence_done = 0;
- fep->link = 0;
-
- if (fep->phy) {
- mii_do_cmd(dev, fep->phy->ack_int);
- mii_do_cmd(dev, fep->phy->config);
- mii_do_cmd(dev, phy_cmd_config); /* display configuration */
- while(!fep->sequence_done)
- schedule();
-
- mii_do_cmd(dev, fep->phy->startup);
- netif_start_queue(dev);
- return 0; /* Success */
- }
- return -ENODEV; /* No PHY we understand */
-#else
- fep->link = 1;
- netif_start_queue(dev);
- return 0; /* Success */
-#endif /* CONFIG_USE_MDIO */
-
-}
-
-static int
-fec_enet_close(struct net_device *dev)
-{
- /* Don't know what to do yet.
- */
- netif_stop_queue(dev);
- fec_stop(dev);
-
- return 0;
-}
-
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
- struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv;
-
- return &fep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering. Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not. I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- volatile fec_t *ep;
-
- fep = (struct fec_enet_private *)dev->priv;
- ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-
- if (dev->flags&IFF_PROMISC) {
-
- /* Log any net taps. */
- printk("%s: Promiscuous mode enabled.\n", dev->name);
- ep->fec_r_cntrl |= FEC_RCNTRL_PROM;
- } else {
-
- ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM;
-
- if (dev->flags & IFF_ALLMULTI) {
- /* Catch all multicast addresses, so set the
- * filter to all 1's.
- */
- ep->fec_hash_table_high = 0xffffffff;
- ep->fec_hash_table_low = 0xffffffff;
- }
-#if 0
- else {
- /* Clear filter and add the addresses in the list.
- */
- ep->sen_gaddr1 = 0;
- ep->sen_gaddr2 = 0;
- ep->sen_gaddr3 = 0;
- ep->sen_gaddr4 = 0;
-
- dmi = dev->mc_list;
-
- for (i=0; i<dev->mc_count; i++) {
-
- /* Only support group multicast for now.
- */
- if (!(dmi->dmi_addr[0] & 1))
- continue;
-
- /* The address in dmi_addr is LSB first,
- * and taddr is MSB first. We have to
- * copy bytes MSB first from dmi_addr.
- */
- mcptr = (u_char *)dmi->dmi_addr + 5;
- tdptr = (u_char *)&ep->sen_taddrh;
- for (j=0; j<6; j++)
- *tdptr++ = *mcptr--;
-
- /* Ask CPM to run CRC and set bit in
- * filter mask.
- */
- cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG;
- /* this delay is necessary here -- Cort */
- udelay(10);
- while (cpmp->cp_cpcr & CPM_CR_FLG);
- }
- }
-#endif
- }
-}
-
-/* Initialize the FEC Ethernet on 860T.
- */
-static int __init fec_enet_init(void)
-{
- struct net_device *dev;
- struct fec_enet_private *fep;
- int i, j, k, err;
- unsigned char *eap, *iap, *ba;
- dma_addr_t mem_addr;
- volatile cbd_t *bdp;
- cbd_t *cbd_base;
- volatile immap_t *immap;
- volatile fec_t *fecp;
- bd_t *bd;
-#ifdef CONFIG_SCC_ENET
- unsigned char tmpaddr[6];
-#endif
-
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- bd = (bd_t *)__res;
-
- dev = alloc_etherdev(sizeof(*fep));
- if (!dev)
- return -ENOMEM;
-
- fep = dev->priv;
-
- fecp = &(immap->im_cpm.cp_fec);
-
- /* Whack a reset. We should wait for this.
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay(1);
- }
- if (i == FEC_RESET_DELAY) {
- printk ("FEC Reset timeout!\n");
- }
-
- /* Set the Ethernet address. If using multiple Enets on the 8xx,
- * this needs some work to get unique addresses.
- */
- eap = (unsigned char *)my_enet_addr;
- iap = bd->bi_enetaddr;
-
-#ifdef CONFIG_SCC_ENET
- /*
- * If a board has Ethernet configured both on a SCC and the
- * FEC, it needs (at least) 2 MAC addresses (we know that Sun
- * disagrees, but anyway). For the FEC port, we create
- * another address by setting one of the address bits above
- * something that would have (up to now) been allocated.
- */
- for (i=0; i<6; i++)
- tmpaddr[i] = *iap++;
- tmpaddr[3] |= 0x80;
- iap = tmpaddr;
-#endif
-
- for (i=0; i<6; i++) {
- dev->dev_addr[i] = *eap++ = *iap++;
- }
-
- /* Allocate memory for buffer descriptors.
- */
- if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
- printk("FEC init error. Need more space.\n");
- printk("FEC initialization failed.\n");
- return 1;
- }
- cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE,
- &mem_addr, GFP_KERNEL);
-
- /* Set receive and transmit descriptor base.
- */
- fep->rx_bd_base = cbd_base;
- fep->tx_bd_base = cbd_base + RX_RING_SIZE;
-
- fep->skb_cur = fep->skb_dirty = 0;
-
- /* Initialize the receive buffer descriptors.
- */
- bdp = fep->rx_bd_base;
- k = 0;
- for (i=0; i<FEC_ENET_RX_PAGES; i++) {
-
- /* Allocate a page.
- */
- ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev,
- PAGE_SIZE,
- &mem_addr,
- GFP_KERNEL);
- /* BUG: no check for failure */
-
- /* Initialize the BD for every fragment in the page.
- */
- for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
- bdp->cbd_sc = BD_ENET_RX_EMPTY;
- bdp->cbd_bufaddr = mem_addr;
- fep->rx_vaddr[k++] = ba;
- mem_addr += FEC_ENET_RX_FRSIZE;
- ba += FEC_ENET_RX_FRSIZE;
- bdp++;
- }
- }
-
- /* Set the last buffer to wrap.
- */
- bdp--;
- bdp->cbd_sc |= BD_SC_WRAP;
-
-#ifdef CONFIG_FEC_PACKETHOOK
- fep->ph_lock = 0;
- fep->ph_rxhandler = fep->ph_txhandler = NULL;
- fep->ph_proto = 0;
- fep->ph_regaddr = NULL;
- fep->ph_priv = NULL;
-#endif
-
- /* Install our interrupt handler.
- */
- if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
- panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
- /* Make Port C, bit 15 an input that causes interrupts.
- */
- immap->im_ioport.iop_pcpar &= ~0x0001;
- immap->im_ioport.iop_pcdir &= ~0x0001;
- immap->im_ioport.iop_pcso &= ~0x0001;
- immap->im_ioport.iop_pcint |= 0x0001;
- cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
- /* Make LEDS reflect Link status.
- */
- *((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
-
-#ifdef PHY_INTERRUPT
- ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
- (0x80000000 >> PHY_INTERRUPT);
-
- if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
- panic("Could not allocate MII IRQ!");
-#endif
-
- dev->base_addr = (unsigned long)fecp;
-
- /* The FEC Ethernet specific entries in the device structure. */
- dev->open = fec_enet_open;
- dev->hard_start_xmit = fec_enet_start_xmit;
- dev->tx_timeout = fec_timeout;
- dev->watchdog_timeo = TX_TIMEOUT;
- dev->stop = fec_enet_close;
- dev->get_stats = fec_enet_get_stats;
- dev->set_multicast_list = set_multicast_list;
-
-#ifdef CONFIG_USE_MDIO
- for (i=0; i<NMII-1; i++)
- mii_cmds[i].mii_next = &mii_cmds[i+1];
- mii_free = mii_cmds;
-#endif /* CONFIG_USE_MDIO */
-
- /* Configure all of port D for MII.
- */
- immap->im_ioport.iop_pdpar = 0x1fff;
-
- /* Bits moved from Rev. D onward.
- */
- if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501)
- immap->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
- else
- immap->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-
-#ifdef CONFIG_USE_MDIO
- /* Set MII speed to 2.5 MHz
- */
- fecp->fec_mii_speed = fep->phy_speed =
- (( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1;
-#else
- fecp->fec_mii_speed = 0; /* turn off MDIO */
-#endif /* CONFIG_USE_MDIO */
-
- err = register_netdev(dev);
- if (err) {
- free_netdev(dev);
- return err;
- }
-
- printk ("%s: FEC ENET Version 0.2, FEC irq %d"
-#ifdef PHY_INTERRUPT
- ", MII irq %d"
-#endif
- ", addr ",
- dev->name, FEC_INTERRUPT
-#ifdef PHY_INTERRUPT
- , PHY_INTERRUPT
-#endif
- );
- for (i=0; i<6; i++)
- printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':');
-
-#ifdef CONFIG_USE_MDIO /* start in full duplex mode, and negotiate speed */
- fec_restart (dev, 1);
-#else /* always use half duplex mode only */
- fec_restart (dev, 0);
-#endif
-
-#ifdef CONFIG_USE_MDIO
- /* Queue up command to detect the PHY and initialize the
- * remainder of the interface.
- */
- fep->phy_id_done = 0;
- fep->phy_addr = 0;
- mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
-#endif /* CONFIG_USE_MDIO */
-
- return 0;
-}
-module_init(fec_enet_init);
-
-/* This function is called to start or restart the FEC during a link
- * change. This only happens when switching between half and full
- * duplex.
- */
-static void
-fec_restart(struct net_device *dev, int duplex)
-{
- struct fec_enet_private *fep;
- int i;
- volatile cbd_t *bdp;
- volatile immap_t *immap;
- volatile fec_t *fecp;
-
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- fecp = &(immap->im_cpm.cp_fec);
-
- fep = dev->priv;
-
- /* Whack a reset. We should wait for this.
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay(1);
- }
- if (i == FEC_RESET_DELAY) {
- printk ("FEC Reset timeout!\n");
- }
-
- /* Set station address.
- */
- fecp->fec_addr_low = (my_enet_addr[0] << 16) | my_enet_addr[1];
- fecp->fec_addr_high = my_enet_addr[2];
-
- /* Reset all multicast.
- */
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
-
- /* Set maximum receive buffer size.
- */
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
- fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
- /* Set receive and transmit descriptor base.
- */
- fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base));
- fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base));
-
- fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
- fep->cur_rx = fep->rx_bd_base;
-
- /* Reset SKB transmit buffers.
- */
- fep->skb_cur = fep->skb_dirty = 0;
- for (i=0; i<=TX_RING_MOD_MASK; i++) {
- if (fep->tx_skbuff[i] != NULL) {
- dev_kfree_skb(fep->tx_skbuff[i]);
- fep->tx_skbuff[i] = NULL;
- }
- }
-
- /* Initialize the receive buffer descriptors.
- */
- bdp = fep->rx_bd_base;
- for (i=0; i<RX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page.
- */
- bdp->cbd_sc = BD_ENET_RX_EMPTY;
- bdp++;
- }
-
- /* Set the last buffer to wrap.
- */
- bdp--;
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* ...and the same for transmit.
- */
- bdp = fep->tx_bd_base;
- for (i=0; i<TX_RING_SIZE; i++) {
-
- /* Initialize the BD for every fragment in the page.
- */
- bdp->cbd_sc = 0;
- bdp->cbd_bufaddr = 0;
- bdp++;
- }
-
- /* Set the last buffer to wrap.
- */
- bdp--;
- bdp->cbd_sc |= BD_SC_WRAP;
-
- /* Enable MII mode.
- */
- if (duplex) {
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; /* MII enable */
- fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; /* FD enable */
- }
- else {
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl = 0;
- }
- fep->full_duplex = duplex;
-
- /* Enable big endian and don't care about SDMA FC.
- */
- fecp->fec_fun_code = 0x78000000;
-
-#ifdef CONFIG_USE_MDIO
- /* Set MII speed.
- */
- fecp->fec_mii_speed = fep->phy_speed;
-#endif /* CONFIG_USE_MDIO */
-
- /* Clear any outstanding interrupt.
- */
- fecp->fec_ievent = 0xffc0;
-
- fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-
- /* Enable interrupts we wish to service.
- */
- fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB |
- FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII );
-
- /* And last, enable the transmit and receive processing.
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
- fecp->fec_r_des_active = 0x01000000;
-}
-
-static void
-fec_stop(struct net_device *dev)
-{
- volatile immap_t *immap;
- volatile fec_t *fecp;
- struct fec_enet_private *fep;
- int i;
-
- immap = (immap_t *)IMAP_ADDR; /* pointer to internal registers */
-
- fecp = &(immap->im_cpm.cp_fec);
-
- if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0)
- return; /* already down */
-
- fep = dev->priv;
-
-
- fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */
-
- for (i = 0;
- ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay(1);
- }
- if (i == FEC_RESET_DELAY) {
- printk ("FEC timeout on graceful transmit stop\n");
- }
-
- /* Clear outstanding MII command interrupts.
- */
- fecp->fec_ievent = FEC_ENET_MII;
-
- /* Enable MII command finished interrupt
- */
- fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
- fecp->fec_imask = FEC_ENET_MII;
-
-#ifdef CONFIG_USE_MDIO
- /* Set MII speed.
- */
- fecp->fec_mii_speed = fep->phy_speed;
-#endif /* CONFIG_USE_MDIO */
-
- /* Disable FEC
- */
- fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN);
-}
OpenPOWER on IntegriCloud