diff options
Diffstat (limited to 'arch/ppc/4xx_io/serial_sicc.c')
| -rw-r--r-- | arch/ppc/4xx_io/serial_sicc.c | 2005 |
1 files changed, 0 insertions, 2005 deletions
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c deleted file mode 100644 index efa0a56..0000000 --- a/arch/ppc/4xx_io/serial_sicc.c +++ /dev/null @@ -1,2005 +0,0 @@ -/* - * Driver for IBM STB3xxx SICC serial port - * - * Based on drivers/char/serial_amba.c, by ARM Ltd. - * - * Copyright 2001 IBM Corp. - * Author: IBM China Research Lab - * Yudong Yang <yangyud@cn.ibm.com> - * Yi Ge <geyi@cn.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * This is a driver for SICC serial port on IBM Redwood 4 evaluation board. - * The driver support both as a console device and normal serial device and - * is compatible with normal ttyS* devices. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/capability.h> -#include <linux/circ_buf.h> -#include <linux/serial.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/serial.h> - - -#include <linux/serialP.h> - - -/* ----------------------------------------------------------------------------- - * From STB03xxx SICC UART Specification - * ----------------------------------------------------------------------------- - * UART Register Offsets. - */ - -#define BL_SICC_LSR 0x0000000 /* line status register read/clear */ -#define BL_SICC_LSRS 0x0000001 /* set line status register read/set */ -#define BL_SICC_HSR 0x0000002 /* handshake status register r/clear */ -#define BL_SICC_HSRS 0x0000003 /* set handshake status register r/set */ -#define BL_SICC_BRDH 0x0000004 /* baudrate divisor high reg r/w */ -#define BL_SICC_BRDL 0x0000005 /* baudrate divisor low reg r/w */ -#define BL_SICC_LCR 0x0000006 /* control register r/w */ -#define BL_SICC_RCR 0x0000007 /* receiver command register r/w */ -#define BL_SICC_TxCR 0x0000008 /* transmitter command register r/w */ -#define BL_SICC_RBR 0x0000009 /* receive buffer r */ -#define BL_SICC_TBR 0x0000009 /* transmit buffer w */ -#define BL_SICC_CTL2 0x000000A /* added for Vesta */ -#define BL_SICC_IrCR 0x000000B /* added for Vesta IR */ - -/* masks and definitions for serial port control register */ - -#define _LCR_LM_MASK 0xc0 /* loop back modes */ -#define _LCR_DTR_MASK 0x20 /* data terminal ready 0-inactive */ -#define _LCR_RTS_MASK 0x10 /* request to send 0-inactive */ -#define _LCR_DB_MASK 0x08 /* data bits mask */ -#define _LCR_PE_MASK 0x04 /* parity enable */ -#define _LCR_PTY_MASK 0x02 /* parity */ -#define _LCR_SB_MASK 0x01 /* stop bit mask */ - -#define _LCR_LM_NORM 0x00 /* normal operation */ -#define _LCR_LM_LOOP 0x40 /* internal loopback mode */ -#define _LCR_LM_ECHO 0x80 /* automatic echo mode */ -#define _LCR_LM_RES 0xc0 /* reserved */ - -#define _LCR_DTR_ACTIVE _LCR_DTR_MASK /* DTR is active */ -#define _LCR_RTS_ACTIVE _LCR_RTS_MASK /* RTS is active */ -#define _LCR_DB_8_BITS _LCR_DB_MASK /* 8 data bits */ -#define _LCR_DB_7_BITS 0x00 /* 7 data bits */ -#define _LCR_PE_ENABLE _LCR_PE_MASK /* parity enabled */ -#define _LCR_PE_DISABLE 0x00 /* parity disabled */ -#define _LCR_PTY_EVEN 0x00 /* even parity */ -#define _LCR_PTY_ODD _LCR_PTY_MASK /* odd parity */ -#define _LCR_SB_1_BIT 0x00 /* one stop bit */ -#define _LCR_SB_2_BIT _LCR_SB_MASK /* two stop bit */ - -/* serial port handshake register */ - -#define _HSR_DIS_MASK 0x80 /* DSR input inactive error mask */ -#define _HSR_CS_MASK 0x40 /* CTS input inactive error mask */ -#define _HSR_DIS_ACT 0x00 /* dsr input is active */ -#define _HSR_DIS_INACT _HSR_DIS_MASK /* dsr input is inactive */ -#define _HSR_CS_ACT 0x00 /* cts input is active */ -#define _HSR_CS_INACT _HSR_CS_MASK /* cts input is active */ - -/* serial port line status register */ - -#define _LSR_RBR_MASK 0x80 /* receive buffer ready mask */ -#define _LSR_FE_MASK 0x40 /* framing error */ -#define _LSR_OE_MASK 0x20 /* overrun error */ -#define _LSR_PE_MASK 0x10 /* parity error */ -#define _LSR_LB_MASK 0x08 /* line break */ -#define _LSR_TBR_MASK 0x04 /* transmit buffer ready */ -#define _LSR_TSR_MASK 0x02 /* transmit shift register ready */ - -#define _LSR_RBR_FULL _LSR_RBR_MASK /* receive buffer is full */ -#define _LSR_FE_ERROR _LSR_FE_MASK /* framing error detected */ -#define _LSR_OE_ERROR _LSR_OE_MASK /* overrun error detected */ -#define _LSR_PE_ERROR _LSR_PE_MASK /* parity error detected */ -#define _LSR_LB_BREAK _LSR_LB_MASK /* line break detected */ -#define _LSR_TBR_EMPTY _LSR_TBR_MASK /* transmit buffer is ready */ -#define _LSR_TSR_EMPTY _LSR_TSR_MASK /* transmit shift register is empty */ -#define _LSR_TX_ALL 0x06 /* all physical transmit is done */ - -#define _LSR_RX_ERR (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \ - _LSR_PE_MASK ) - -/* serial port receiver command register */ - -#define _RCR_ER_MASK 0x80 /* enable receiver mask */ -#define _RCR_DME_MASK 0x60 /* dma mode */ -#define _RCR_EIE_MASK 0x10 /* error interrupt enable mask */ -#define _RCR_PME_MASK 0x08 /* pause mode mask */ - -#define _RCR_ER_ENABLE _RCR_ER_MASK /* receiver enabled */ -#define _RCR_DME_DISABLE 0x00 /* dma disabled */ -#define _RCR_DME_RXRDY 0x20 /* dma disabled, RxRDY interrupt enabled*/ -#define _RCR_DME_ENABLE2 0x40 /* dma enabled,receiver src channel 2 */ -#define _RCR_DME_ENABLE3 0x60 /* dma enabled,receiver src channel 3 */ -#define _RCR_PME_HARD _RCR_PME_MASK /* RTS controlled by hardware */ -#define _RCR_PME_SOFT 0x00 /* RTS controlled by software */ - -/* serial port transmit command register */ - -#define _TxCR_ET_MASK 0x80 /* transmitter enable mask */ -#define _TxCR_DME_MASK 0x60 /* dma mode mask */ -#define _TxCR_TIE_MASK 0x10 /* empty interrupt enable mask */ -#define _TxCR_EIE_MASK 0x08 /* error interrupt enable mask */ -#define _TxCR_SPE_MASK 0x04 /* stop/pause mask */ -#define _TxCR_TB_MASK 0x02 /* transmit break mask */ - -#define _TxCR_ET_ENABLE _TxCR_ET_MASK /* transmitter enabled */ -#define _TxCR_DME_DISABLE 0x00 /* transmitter disabled, TBR intr disabled */ -#define _TxCR_DME_TBR 0x20 /* transmitter disabled, TBR intr enabled */ -#define _TxCR_DME_CHAN_2 0x40 /* dma enabled, destination chann 2 */ -#define _TxCR_DME_CHAN_3 0x60 /* dma enabled, destination chann 3 */ - -/* serial ctl reg 2 - added for Vesta */ - -#define _CTL2_EXTERN 0x80 /* */ -#define _CTL2_USEFIFO 0x40 /* */ -#define _CTL2_RESETRF 0x08 /* */ -#define _CTL2_RESETTF 0x04 /* */ - - - -#define SERIAL_SICC_NAME "ttySICC" -#define SERIAL_SICC_MAJOR 150 -#define SERIAL_SICC_MINOR 1 -#define SERIAL_SICC_NR 1 - -#ifndef TRUE -#define TRUE 1 -#endif -#ifndef FALSE -#define FALSE 0 -#endif - -/* - * Things needed by tty driver - */ -static struct tty_driver *siccnormal_driver; - -#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -/* - * Things needed internally to this driver - */ - -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static u_char *tmp_buf; - -#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) - -/* number of characters left in xmit buffer before we ask for more */ -#define WAKEUP_CHARS 256 -#define SICC_ISR_PASS_LIMIT 256 - -#define EVT_WRITE_WAKEUP 0 - -struct SICC_icount { - __u32 cts; - __u32 dsr; - __u32 rng; - __u32 dcd; - __u32 rx; - __u32 tx; - __u32 frame; - __u32 overrun; - __u32 parity; - __u32 brk; - __u32 buf_overrun; -}; - -/* - * Static information about the port - */ -struct SICC_port { - unsigned int uart_base; - unsigned int uart_base_phys; - unsigned int irqrx; - unsigned int irqtx; - unsigned int uartclk; - unsigned int fifosize; - unsigned int tiocm_support; - void (*set_mctrl)(struct SICC_port *, u_int mctrl); -}; - -/* - * This is the state information which is persistent across opens - */ -struct SICC_state { - struct SICC_icount icount; - unsigned int line; - unsigned int close_delay; - unsigned int closing_wait; - unsigned int custom_divisor; - unsigned int flags; - int count; - struct SICC_info *info; - spinlock_t sicc_lock; -}; - -#define SICC_XMIT_SIZE 1024 -/* - * This is the state information which is only valid when the port is open. - */ -struct SICC_info { - struct SICC_port *port; - struct SICC_state *state; - struct tty_struct *tty; - unsigned char x_char; - unsigned char old_status; - unsigned char read_status_mask; - unsigned char ignore_status_mask; - struct circ_buf xmit; - unsigned int flags; -#ifdef SUPPORT_SYSRQ - unsigned long sysrq; -#endif - - unsigned int event; - unsigned int timeout; - unsigned int lcr_h; - unsigned int mctrl; - int blocked_open; - - struct tasklet_struct tlet; - - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - wait_queue_head_t delta_msr_wait; -}; - -#ifdef CONFIG_SERIAL_SICC_CONSOLE -static struct console siccuart_cons; -#endif -static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios); -static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout); - - - -static void powerpcMtcic_cr(unsigned long value) -{ - mtdcr(DCRN_CICCR, value); -} - -static unsigned long powerpcMfcic_cr(void) -{ - return mfdcr(DCRN_CICCR); -} - -static unsigned long powerpcMfclkgpcr(void) -{ - return mfdcr(DCRN_SCCR); -} - -static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl) -{ -} - -static struct SICC_port sicc_ports[SERIAL_SICC_NR] = { - { - .uart_base = 0, - .uart_base_phys = SICC0_IO_BASE, - .irqrx = SICC0_INTRX, - .irqtx = SICC0_INTTX, -// .uartclk = 0, - .fifosize = 1, - .set_mctrl = sicc_set_mctrl_null, - } -}; - -static struct SICC_state sicc_state[SERIAL_SICC_NR]; - -static void siccuart_enable_rx_interrupt(struct SICC_info *info) -{ - unsigned char cr; - - cr = readb(info->port->uart_base+BL_SICC_RCR); - cr &= ~_RCR_DME_MASK; - cr |= _RCR_DME_RXRDY; - writeb(cr, info->port->uart_base+BL_SICC_RCR); -} - -static void siccuart_disable_rx_interrupt(struct SICC_info *info) -{ - unsigned char cr; - - cr = readb(info->port->uart_base+BL_SICC_RCR); - cr &= ~_RCR_DME_MASK; - cr |= _RCR_DME_DISABLE; - writeb(cr, info->port->uart_base+BL_SICC_RCR); -} - - -static void siccuart_enable_tx_interrupt(struct SICC_info *info) -{ - unsigned char cr; - - cr = readb(info->port->uart_base+BL_SICC_TxCR); - cr &= ~_TxCR_DME_MASK; - cr |= _TxCR_DME_TBR; - writeb(cr, info->port->uart_base+BL_SICC_TxCR); -} - -static void siccuart_disable_tx_interrupt(struct SICC_info *info) -{ - unsigned char cr; - - cr = readb(info->port->uart_base+BL_SICC_TxCR); - cr &= ~_TxCR_DME_MASK; - cr |= _TxCR_DME_DISABLE; - writeb(cr, info->port->uart_base+BL_SICC_TxCR); -} - - -static void siccuart_stop(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - - /* disable interrupts while stopping serial port interrupts */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - siccuart_disable_tx_interrupt(info); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); -} - -static void siccuart_start(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - - /* disable interrupts while starting serial port interrupts */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - if (info->xmit.head != info->xmit.tail - && info->xmit.buf) - siccuart_enable_tx_interrupt(info); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); -} - - -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. - */ -static void siccuart_event(struct SICC_info *info, int event) -{ - info->event |= 1 << event; - tasklet_schedule(&info->tlet); -} - -static void -siccuart_rx_chars(struct SICC_info *info) -{ - struct tty_struct *tty = info->tty; - unsigned int status, ch, rsr, flg, ignored = 0; - struct SICC_icount *icount = &info->state->icount; - struct SICC_port *port = info->port; - - status = readb(port->uart_base+BL_SICC_LSR ); - while (status & _LSR_RBR_FULL) { - ch = readb(port->uart_base+BL_SICC_RBR); - - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - goto ignore_char; - icount->rx++; - - flg = TTY_NORMAL; - - /* - * Note that the error handling code is - * out of the main execution path - */ - rsr = readb(port->uart_base+BL_SICC_LSR); - if (rsr & _LSR_RX_ERR) - goto handle_error; -#ifdef SUPPORT_SYSRQ - if (info->sysrq) { - if (ch && time_before(jiffies, info->sysrq)) { - handle_sysrq(ch, NULL); - info->sysrq = 0; - goto ignore_char; - } - info->sysrq = 0; - } -#endif - error_return: - *tty->flip.flag_buf_ptr++ = flg; - *tty->flip.char_buf_ptr++ = ch; - tty->flip.count++; - ignore_char: - status = readb(port->uart_base+BL_SICC_LSR ); - } -out: - tty_flip_buffer_push(tty); - return; - -handle_error: - if (rsr & _LSR_LB_BREAK) { - rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK); - icount->brk++; - -#ifdef SUPPORT_SYSRQ - if (info->state->line == siccuart_cons.index) { - if (!info->sysrq) { - info->sysrq = jiffies + HZ*5; - goto ignore_char; - } - } -#endif - } else if (rsr & _LSR_PE_MASK) - icount->parity++; - else if (rsr & _LSR_FE_MASK) - icount->frame++; - if (rsr & _LSR_OE_MASK) - icount->overrun++; - - if (rsr & info->ignore_status_mask) { - if (++ignored > 100) - goto out; - goto ignore_char; - } - rsr &= info->read_status_mask; - - if (rsr & _LSR_LB_BREAK) - flg = TTY_BREAK; - else if (rsr & _LSR_PE_MASK) - flg = TTY_PARITY; - else if (rsr & _LSR_FE_MASK) - flg = TTY_FRAME; - - if (rsr & _LSR_OE_MASK) { - /* - * CHECK: does overrun affect the current character? - * ASSUMPTION: it does not. - */ - *tty->flip.flag_buf_ptr++ = flg; - *tty->flip.char_buf_ptr++ = ch; - tty->flip.count++; - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - goto ignore_char; - ch = 0; - flg = TTY_OVERRUN; - } -#ifdef SUPPORT_SYSRQ - info->sysrq = 0; -#endif - goto error_return; -} - -static void siccuart_tx_chars(struct SICC_info *info) -{ - struct SICC_port *port = info->port; - int count; - unsigned char status; - - - if (info->x_char) { - writeb(info->x_char, port->uart_base+ BL_SICC_TBR); - info->state->icount.tx++; - info->x_char = 0; - return; - } - if (info->xmit.head == info->xmit.tail - || info->tty->stopped - || info->tty->hw_stopped) { - siccuart_disable_tx_interrupt(info); - writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR); - return; - } - - count = port->fifosize; - do { - writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR); - info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1); - info->state->icount.tx++; - if (info->xmit.head == info->xmit.tail) - break; - } while (--count > 0); - - if (CIRC_CNT(info->xmit.head, - info->xmit.tail, - SICC_XMIT_SIZE) < WAKEUP_CHARS) - siccuart_event(info, EVT_WRITE_WAKEUP); - - if (info->xmit.head == info->xmit.tail) { - siccuart_disable_tx_interrupt(info); - } -} - - -static irqreturn_t siccuart_int_rx(int irq, void *dev_id) -{ - struct SICC_info *info = dev_id; - siccuart_rx_chars(info) - return IRQ_HANDLED; -} - - -static irqreturn_t siccuart_int_tx(int irq, void *dev_id) -{ - struct SICC_info *info = dev_id; - siccuart_tx_chars(info); - return IRQ_HANDLED; -} - -static void siccuart_tasklet_action(unsigned long data) -{ - struct SICC_info *info = (struct SICC_info *)data; - struct tty_struct *tty; - - tty = info->tty; - if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event)) - return; - - if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && - tty->ldisc.write_wakeup) - (tty->ldisc.write_wakeup)(tty); - wake_up_interruptible(&tty->write_wait); -} - -static int siccuart_startup(struct SICC_info *info) -{ - unsigned long flags; - unsigned long page; - int retval = 0; - - if (info->flags & ASYNC_INITIALIZED) { - return 0; - } - - page = get_zeroed_page(GFP_KERNEL); - if (!page) - return -ENOMEM; - - if (info->port->uart_base == 0) - info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE); - if (info->port->uart_base == 0) { - free_page(page); - return -ENOMEM; - } - - /* lock access to info while doing setup */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - - if (info->xmit.buf) - free_page(page); - else - info->xmit.buf = (unsigned char *) page; - - - info->mctrl = 0; - if (info->tty->termios->c_cflag & CBAUD) - info->mctrl = TIOCM_RTS | TIOCM_DTR; - info->port->set_mctrl(info->port, info->mctrl); - - /* - * initialise the old status of the modem signals - */ - info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY; - - - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); - info->xmit.head = info->xmit.tail = 0; - - /* - * Set up the tty->alt_speed kludge - */ - if (info->tty) { - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - } - - - writeb( 0x00, info->port->uart_base + BL_SICC_IrCR ); // disable IrDA - - - /* - * and set the speed of the serial port - */ - siccuart_change_speed(info, 0); - - // enable rx/tx ports - writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR); - writeb(_TxCR_ET_ENABLE , info->port->uart_base + BL_SICC_TxCR); - - readb(info->port->uart_base + BL_SICC_RBR); // clear rx port - - writeb(0xf8, info->port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */ - - /* - * Finally, enable interrupts - */ - - /* - * Allocate the IRQ - */ - retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info); - if (retval) { - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - retval = 0; - } - goto errout; - } - retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info); - if (retval) { - if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - retval = 0; - } - free_irq(info->port->irqrx, info); - goto errout; - } - - siccuart_enable_rx_interrupt(info); - - info->flags |= ASYNC_INITIALIZED; - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - return 0; - - -errout: - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void siccuart_shutdown(struct SICC_info *info) -{ - unsigned long flags; - - if (!(info->flags & ASYNC_INITIALIZED)) - return; - - /* lock while shutting down port */ - spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */ - - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be woken up - */ - wake_up_interruptible(&info->delta_msr_wait); - - /* - * disable all interrupts, disable the port - */ - siccuart_disable_rx_interrupt(info); - siccuart_disable_tx_interrupt(info); - - /* - * Free the IRQ - */ - free_irq(info->port->irqtx, info); - free_irq(info->port->irqrx, info); - - if (info->xmit.buf) { - unsigned long pg = (unsigned long) info->xmit.buf; - info->xmit.buf = NULL; - free_page(pg); - } - - - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) - info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS); - info->port->set_mctrl(info->port, info->mctrl); - - /* kill off our tasklet */ - tasklet_kill(&info->tlet); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); - - info->flags &= ~ASYNC_INITIALIZED; - - spin_unlock_irqrestore(&info->state->sicc_lock,flags); -} - - -static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios) -{ - unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits; - unsigned long flags; - - if (!info->tty || !info->tty->termios) - return; - - cflag = info->tty->termios->c_cflag; - - pr_debug("siccuart_set_cflag(0x%x) called\n", cflag); - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS7: lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9; break; - default: lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8 - } - if (cflag & CSTOPB) { - lcr_h |= _LCR_SB_2_BIT; - bits ++; - } - if (cflag & PARENB) { - lcr_h |= _LCR_PE_ENABLE; - bits++; - if (!(cflag & PARODD)) - lcr_h |= _LCR_PTY_ODD; - else - lcr_h |= _LCR_PTY_EVEN; - } - - do { - /* Determine divisor based on baud rate */ - baud = tty_get_baud_rate(info->tty); - if (!baud) - baud = 9600; - - - { - // here is ppc403SetBaud(com_port, baud); - unsigned long divisor, clockSource, temp; - - /* Ensure CICCR[7] is 0 to select Internal Baud Clock */ - powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF)); - - /* Determine Internal Baud Clock Frequency */ - /* powerpcMfclkgpcr() reads DCR 0x120 - the*/ - /* SCCR (Serial Clock Control Register) on Vesta */ - temp = powerpcMfclkgpcr(); - - if(temp & 0x00000080) { - clockSource = 324000000; - } - else { - clockSource = 216000000; - } - clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18); - divisor = clockSource/(16*baud) - 1; - /* divisor has only 12 bits of resolution */ - if(divisor>0x00000FFF){ - divisor=0x00000FFF; - } - - quot = divisor; - } - - if (baud == 38400 && - ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->state->custom_divisor; - - if (!quot && old_termios) { - info->tty->termios->c_cflag &= ~CBAUD; - info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD); - old_termios = NULL; - } - } while (quot == 0 && old_termios); - - /* As a last resort, if the quotient is zero, default to 9600 bps */ - if (!quot) - quot = (info->port->uartclk / (16 * 9600)) - 1; - - info->timeout = info->port->fifosize * HZ * bits / baud; - info->timeout += HZ/50; /* Add .02 seconds of slop */ - - if (cflag & CRTSCTS) - info->flags |= ASYNC_CTS_FLOW; - else - info->flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->flags &= ~ASYNC_CHECK_CD; - else - info->flags |= ASYNC_CHECK_CD; - - /* - * Set up parity check flag - */ -#define RELEVENT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) - - info->read_status_mask = _LSR_OE_MASK; - if (I_INPCK(info->tty)) - info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) - info->read_status_mask |= _LSR_LB_MASK; - - /* - * Characters to ignore - */ - info->ignore_status_mask = 0; - if (I_IGNPAR(info->tty)) - info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK; - if (I_IGNBRK(info->tty)) { - info->ignore_status_mask |= _LSR_LB_MASK; - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (I_IGNPAR(info->tty)) - info->ignore_status_mask |= _LSR_OE_MASK; - } - - /* disable interrupts while reading and clearing registers */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - - old_rcr = readb(info->port->uart_base + BL_SICC_RCR); - old_tcr = readb(info->port->uart_base + BL_SICC_TxCR); - - - writeb(0, info->port->uart_base + BL_SICC_RCR); - writeb(0, info->port->uart_base + BL_SICC_TxCR); - - /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/ - - - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - - - /* Set baud rate */ - writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH ); - writeb( quot & 0x00000FF, info->port->uart_base + BL_SICC_BRDL ); - - /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */ - /* For now, do NOT use FIFOs since 403 UART did not have this */ - /* capability and this driver was inherited from 403UART. */ - writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2); - - writeb(lcr_h, info->port->uart_base + BL_SICC_LCR); - - writeb(old_rcr, info->port->uart_base + BL_SICC_RCR); // restore rcr - writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr - -} - - -static void siccuart_put_char(struct tty_struct *tty, u_char ch) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - - if (!tty || !info->xmit.buf) - return; - - /* lock info->xmit while adding character to tx buffer */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) { - info->xmit.buf[info->xmit.head] = ch; - info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1); - } - spin_unlock_irqrestore(&info->state->sicc_lock,flags); -} - -static void siccuart_flush_chars(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - - if (info->xmit.head == info->xmit.tail - || tty->stopped - || tty->hw_stopped - || !info->xmit.buf) - return; - - /* disable interrupts while transmitting characters */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - siccuart_enable_tx_interrupt(info); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); -} - -static int siccuart_write(struct tty_struct *tty, - const u_char * buf, int count) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - int c, ret = 0; - - if (!tty || !info->xmit.buf || !tmp_buf) - return 0; - - /* lock info->xmit while removing characters from buffer */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - while (1) { - c = CIRC_SPACE_TO_END(info->xmit.head, - info->xmit.tail, - SICC_XMIT_SIZE); - if (count < c) - c = count; - if (c <= 0) - break; - memcpy(info->xmit.buf + info->xmit.head, buf, c); - info->xmit.head = (info->xmit.head + c) & - (SICC_XMIT_SIZE - 1); - buf += c; - count -= c; - ret += c; - } - if (info->xmit.head != info->xmit.tail - && !tty->stopped - && !tty->hw_stopped) - siccuart_enable_tx_interrupt(info); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - return ret; -} - -static int siccuart_write_room(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - - return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE); -} - -static int siccuart_chars_in_buffer(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - - return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE); -} - -static void siccuart_flush_buffer(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - - pr_debug("siccuart_flush_buffer(%d) called\n", tty->index); - /* lock info->xmit while zeroing buffer counts */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - info->xmit.head = info->xmit.tail = 0; - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - wake_up_interruptible(&tty->write_wait); - if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && - tty->ldisc.write_wakeup) - (tty->ldisc.write_wakeup)(tty); -} - -/* - * This function is used to send a high-priority XON/XOFF character to - * the device - */ -static void siccuart_send_xchar(struct tty_struct *tty, char ch) -{ - struct SICC_info *info = tty->driver_data; - - info->x_char = ch; - if (ch) - siccuart_enable_tx_interrupt(info); -} - -static void siccuart_throttle(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - - if (I_IXOFF(tty)) - siccuart_send_xchar(tty, STOP_CHAR(tty)); - - if (tty->termios->c_cflag & CRTSCTS) { - /* disable interrupts while setting modem control lines */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - info->mctrl &= ~TIOCM_RTS; - info->port->set_mctrl(info->port, info->mctrl); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - } -} - -static void siccuart_unthrottle(struct tty_struct *tty) -{ - struct SICC_info *info = (struct SICC_info *) tty->driver_data; - unsigned long flags; - - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - siccuart_send_xchar(tty, START_CHAR(tty)); - } - - if (tty->termios->c_cflag & CRTSCTS) { - /* disable interrupts while setting modem control lines */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - info->mctrl |= TIOCM_RTS; - info->port->set_mctrl(info->port, info->mctrl); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - } -} - -static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo) -{ - struct SICC_state *state = info->state; - struct SICC_port *port = info->port; - struct serial_struct tmp; - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = 0; - tmp.line = state->line; - tmp.port = port->uart_base; - if (HIGH_BITS_OFFSET) - tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET; - tmp.irq = port->irqrx; - tmp.flags = 0; - tmp.xmit_fifo_size = port->fifosize; - tmp.baud_base = port->uartclk / 16; - tmp.close_delay = state->close_delay; - tmp.closing_wait = state->closing_wait; - tmp.custom_divisor = state->custom_divisor; - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int set_serial_info(struct SICC_info *info, - struct serial_struct *newinfo) -{ - struct serial_struct new_serial; - struct SICC_state *state, old_state; - struct SICC_port *port; - unsigned long new_port; - unsigned int i, change_irq, change_port; - int retval = 0; - - if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) - return -EFAULT; - - state = info->state; - old_state = *state; - port = info->port; - - new_port = new_serial.port; - if (HIGH_BITS_OFFSET) - new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; - - change_irq = new_serial.irq != port->irqrx; - change_port = new_port != port->uart_base; - - if (!capable(CAP_SYS_ADMIN)) { - if (change_irq || change_port || - (new_serial.baud_base != port->uartclk / 16) || - (new_serial.close_delay != state->close_delay) || - (new_serial.xmit_fifo_size != port->fifosize) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (state->flags & ~ASYNC_USR_MASK))) - return -EPERM; - state->flags = ((state->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->flags = ((info->flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - state->custom_divisor = new_serial.custom_divisor; - goto check_and_exit; - } - - if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) || - (new_serial.baud_base < 9600)) - return -EINVAL; - - if (new_serial.type && change_port) { - for (i = 0; i < SERIAL_SICC_NR; i++) - if ((port != sicc_ports + i) && - sicc_ports[i].uart_base != new_port) - return -EADDRINUSE; - } - - if ((change_port || change_irq) && (state->count > 1)) - return -EBUSY; - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - port->uartclk = new_serial.baud_base * 16; - state->flags = ((state->flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) | - (info->flags & ASYNC_INTERNAL_FLAGS)); - state->custom_divisor = new_serial.custom_divisor; - state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay); - state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait); - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - port->fifosize = new_serial.xmit_fifo_size; - - if (change_port || change_irq) { - /* - * We need to shutdown the serial port at the old - * port/irq combination. - */ - siccuart_shutdown(info); - port->irqrx = new_serial.irq; - port->uart_base = new_port; - } - -check_and_exit: - if (!port->uart_base) - return 0; - if (info->flags & ASYNC_INITIALIZED) { - if ((old_state.flags & ASYNC_SPD_MASK) != - (state->flags & ASYNC_SPD_MASK) || - (old_state.custom_divisor != state->custom_divisor)) { - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->tty->alt_speed = 57600; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->tty->alt_speed = 115200; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->tty->alt_speed = 230400; - if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->tty->alt_speed = 460800; - siccuart_change_speed(info, NULL); - } - } else - retval = siccuart_startup(info); - return retval; -} - - -/* - * get_lsr_info - get line status register info - */ -static int get_lsr_info(struct SICC_info *info, unsigned int *value) -{ - unsigned int result, status; - unsigned long flags; - - /* disable interrupts while reading status from port */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - status = readb(info->port->uart_base + BL_SICC_LSR); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0; - - /* - * If we're about to load something into the transmit - * register, we'll pretend the transmitter isn't empty to - * avoid a race condition (depending on when the transmit - * interrupt happens). - */ - if (info->x_char || - ((CIRC_CNT(info->xmit.head, info->xmit.tail, - SICC_XMIT_SIZE) > 0) && - !info->tty->stopped && !info->tty->hw_stopped)) - result &= TIOCSER_TEMT; - - return put_user(result, value); -} - -static int get_modem_info(struct SICC_info *info, unsigned int *value) -{ - unsigned int result = info->mctrl; - - return put_user(result, value); -} - -static int set_modem_info(struct SICC_info *info, unsigned int cmd, - unsigned int *value) -{ - unsigned int arg, old; - unsigned long flags; - - if (get_user(arg, value)) - return -EFAULT; - - old = info->mctrl; - switch (cmd) { - case TIOCMBIS: - info->mctrl |= arg; - break; - - case TIOCMBIC: - info->mctrl &= ~arg; - break; - - case TIOCMSET: - info->mctrl = arg; - break; - - default: - return -EINVAL; - } - /* disable interrupts while setting modem control lines */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - if (old != info->mctrl) - info->port->set_mctrl(info->port, info->mctrl); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - return 0; -} - -static void siccuart_break_ctl(struct tty_struct *tty, int break_state) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - unsigned int lcr_h; - - - /* disable interrupts while setting break state */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - lcr_h = readb(info->port + BL_SICC_LSR); - if (break_state == -1) - lcr_h |= _LSR_LB_MASK; - else - lcr_h &= ~_LSR_LB_MASK; - writeb(lcr_h, info->port + BL_SICC_LSRS); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); -} - -static int siccuart_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct SICC_info *info = tty->driver_data; - struct SICC_icount cnow; - struct serial_icounter_struct icount; - unsigned long flags; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCMGET: - return get_modem_info(info, (unsigned int *)arg); - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - return set_modem_info(info, cmd, (unsigned int *)arg); - case TIOCGSERIAL: - return get_serial_info(info, - (struct serial_struct *)arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *)arg); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, (unsigned int *)arg); - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - return 0; - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - /* disable interrupts while getting interrupt count */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - cnow = info->state->icount; - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - icount.cts = cnow.cts; - icount.dsr = cnow.dsr; - icount.rng = cnow.rng; - icount.dcd = cnow.dcd; - icount.rx = cnow.rx; - icount.tx = cnow.tx; - icount.frame = cnow.frame; - icount.overrun = cnow.overrun; - icount.parity = cnow.parity; - icount.brk = cnow.brk; - icount.buf_overrun = cnow.buf_overrun; - - return copy_to_user((void *)arg, &icount, sizeof(icount)) - ? -EFAULT : 0; - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios) -{ - struct SICC_info *info = tty->driver_data; - unsigned long flags; - unsigned int cflag = tty->termios->c_cflag; - - if ((cflag ^ old_termios->c_cflag) == 0 && - RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) - return; - - siccuart_change_speed(info, old_termios); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(cflag & CBAUD)) { - /* disable interrupts while setting break state */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR); - info->port->set_mctrl(info->port, info->mctrl); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (cflag & CBAUD)) { - /* disable interrupts while setting break state */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - info->mctrl |= TIOCM_DTR; - if (!(cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) - info->mctrl |= TIOCM_RTS; - info->port->set_mctrl(info->port, info->mctrl); - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - } - - /* Handle turning off CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(cflag & CRTSCTS)) { - tty->hw_stopped = 0; - siccuart_start(tty); - } - -#if 0 - /* - * No need to wake up processes in open wait, since they - * sample the CLOCAL flag once, and don't recheck it. - * XXX It's not clear whether the current behavior is correct - * or not. Hence, this may change..... - */ - if (!(old_termios->c_cflag & CLOCAL) && - (tty->termios->c_cflag & CLOCAL)) - wake_up_interruptible(&info->open_wait); -#endif -} - -static void siccuart_close(struct tty_struct *tty, struct file *filp) -{ - struct SICC_info *info = tty->driver_data; - struct SICC_state *state; - unsigned long flags; - - if (!info) - return; - - state = info->state; - - //pr_debug("siccuart_close() called\n"); - - /* lock tty->driver_data while closing port */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - - if (tty_hung_up_p(filp)) { - goto quick_close; - } - - if ((tty->count == 1) && (state->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. state->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count); - state->count = 1; - } - if (--state->count < 0) { - printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count); - state->count = 0; - } - if (state->count) { - goto quick_close; - } - info->flags |= ASYNC_CLOSING; - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->state->closing_wait); - /* - * At this point, we stop accepting input. To do this, we - * disable the receive line status interrupts. - */ - if (info->flags & ASYNC_INITIALIZED) { - siccuart_disable_rx_interrupt(info); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - siccuart_wait_until_sent(tty, info->timeout); - } - siccuart_shutdown(info); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - if (tty->ldisc.flush_buffer) - tty->ldisc.flush_buffer(tty); - tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->state->close_delay) - schedule_timeout_interruptible(info->state->close_delay); - wake_up_interruptible(&info->open_wait); - } - info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->close_wait); - return; - -quick_close: - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - return; -} - -static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct SICC_info *info = (struct SICC_info *) tty->driver_data; - unsigned long char_time, expire; - - if (info->port->fifosize == 0) - return; - - /* - * Set the check interval to be 1/5 of the estimated time to - * send a single character, and make it at least 1. The check - * interval should also be less than the timeout. - * - * Note: we have to use pretty tight timings here to satisfy - * the NIST-PCTS. - */ - char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize; - char_time = char_time / 5; - if (char_time == 0) - char_time = 1; - - // Crazy!! sometimes the input arg 'timeout' can be negtive numbers :-( - if (timeout >= 0 && timeout < char_time) - char_time = timeout; - /* - * If the transmitter hasn't cleared in twice the approximate - * amount of time to send the entire FIFO, it probably won't - * ever clear. This assumes the UART isn't doing flow - * control, which is currently the case. Hence, if it ever - * takes longer than info->timeout, this is probably due to a - * UART bug of some kind. So, we clamp the timeout parameter at - * 2*info->timeout. - */ - if (!timeout || timeout > 2 * info->timeout) - timeout = 2 * info->timeout; - - expire = jiffies + timeout; - pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu char_time=%lu...\n", - tty->index, jiffies, - expire, char_time); - while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) { - schedule_timeout_interruptible(char_time); - if (signal_pending(current)) - break; - if (timeout && time_after(jiffies, expire)) - break; - } - set_current_state(TASK_RUNNING); -} - -static void siccuart_hangup(struct tty_struct *tty) -{ - struct SICC_info *info = tty->driver_data; - struct SICC_state *state = info->state; - - siccuart_flush_buffer(tty); - if (info->flags & ASYNC_CLOSING) - return; - siccuart_shutdown(info); - info->event = 0; - state->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); -} - -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct SICC_info *info) -{ - DECLARE_WAITQUEUE(wait, current); - struct SICC_state *state = info->state; - unsigned long flags; - int do_clocal = 0, extra_count = 0, retval; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); - return (info->flags & ASYNC_HUP_NOTIFY) ? - -EAGAIN : -ERESTARTSYS; - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, state->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&info->open_wait, &wait); - /* lock while decrementing state->count */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - if (!tty_hung_up_p(filp)) { - extra_count = 1; - state->count--; - } - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - info->blocked_open++; - while (1) { - /* disable interrupts while setting modem control lines */ - spin_lock_irqsave(&info->state->sicc_lock,flags); - if (tty->termios->c_cflag & CBAUD) { - info->mctrl = TIOCM_DTR | TIOCM_RTS; - info->port->set_mctrl(info->port, info->mctrl); - } - spin_unlock_irqrestore(&info->state->sicc_lock,flags); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(info->flags & ASYNC_INITIALIZED)) { - if (info->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(info->flags & ASYNC_CLOSING) && - (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&info->open_wait, &wait); - if (extra_count) - state->count++; - info->blocked_open--; - if (retval) - return retval; - info->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -static struct SICC_info *siccuart_get(int line) -{ - struct SICC_info *info; - struct SICC_state *state = sicc_state + line; - - state->count++; - if (state->info) - return state->info; - info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL); - if (info) { - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->delta_msr_wait); - info->flags = state->flags; - info->state = state; - info->port = sicc_ports + line; - tasklet_init(&info->tlet, siccuart_tasklet_action, - (unsigned long)info); - } - if (state->info) { - kfree(info); - return state->info; - } - state->info = info; - return info; -} - -static int siccuart_open(struct tty_struct *tty, struct file *filp) -{ - struct SICC_info *info; - int retval, line = tty->index; - - - // is this a line that we've got? - if (line >= SERIAL_SICC_NR) { - return -ENODEV; - } - - info = siccuart_get(line); - if (!info) - return -ENOMEM; - - tty->driver_data = info; - info->tty = tty; - info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - - /* - * Make sure we have the temporary buffer allocated - */ - if (!tmp_buf) { - unsigned long page = get_zeroed_page(GFP_KERNEL); - if (tmp_buf) - free_page(page); - else if (!page) { - return -ENOMEM; - } - tmp_buf = (u_char *)page; - } - - /* - * If the port is in the middle of closing, bail out now. - */ - if (tty_hung_up_p(filp) || - (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); - return -EAGAIN; - } - - /* - * Start up the serial port - */ - retval = siccuart_startup(info); - if (retval) { - return retval; - } - - retval = block_til_ready(tty, filp, info); - if (retval) { - return retval; - } - -#ifdef CONFIG_SERIAL_SICC_CONSOLE - if (siccuart_cons.cflag && siccuart_cons.index == line) { - tty->termios->c_cflag = siccuart_cons.cflag; - siccuart_cons.cflag = 0; - siccuart_change_speed(info, NULL); - } -#endif - return 0; -} - -static const struct tty_operations sicc_ops = { - .open = siccuart_open, - .close = siccuart_close, - .write = siccuart_write, - .put_char = siccuart_put_char, - .flush_chars = siccuart_flush_chars, - .write_room = siccuart_write_room, - .chars_in_buffer = siccuart_chars_in_buffer, - .flush_buffer = siccuart_flush_buffer, - .ioctl = siccuart_ioctl, - .throttle = siccuart_throttle, - .unthrottle = siccuart_unthrottle, - .send_xchar = siccuart_send_xchar, - .set_termios = siccuart_set_termios, - .stop = siccuart_stop, - .start = siccuart_start, - .hangup = siccuart_hangup, - .break_ctl = siccuart_break_ctl, - .wait_until_sent = siccuart_wait_until_sent, -}; - -int __init siccuart_init(void) -{ - int i; - siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR); - if (!siccnormal_driver) - return -ENOMEM; - printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n"); - siccnormal_driver->driver_name = "serial_sicc"; - siccnormal_driver->owner = THIS_MODULE; - siccnormal_driver->name = SERIAL_SICC_NAME; - siccnormal_driver->major = SERIAL_SICC_MAJOR; - siccnormal_driver->minor_start = SERIAL_SICC_MINOR; - siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL; - siccnormal_driver->subtype = SERIAL_TYPE_NORMAL; - siccnormal_driver->init_termios = tty_std_termios; - siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(siccnormal_driver, &sicc_ops); - - if (tty_register_driver(siccnormal_driver)) - panic("Couldn't register SICC serial driver\n"); - - for (i = 0; i < SERIAL_SICC_NR; i++) { - struct SICC_state *state = sicc_state + i; - state->line = i; - state->close_delay = msecs_to_jiffies(500); - state->closing_wait = 30 * HZ; - spin_lock_init(&state->sicc_lock); - } - - - return 0; -} - -__initcall(siccuart_init); - -#ifdef CONFIG_SERIAL_SICC_CONSOLE -/************** console driver *****************/ - -/* - * This code is currently never used; console->read is never called. - * Therefore, although we have an implementation, we don't use it. - * FIXME: the "const char *s" should be fixed to "char *s" some day. - * (when the definition in include/linux/console.h is also fixed) - */ -#ifdef used_and_not_const_char_pointer -static int siccuart_console_read(struct console *co, const char *s, u_int count) -{ - struct SICC_port *port = &sicc_ports[co->index]; - unsigned int status; - char *w; - int c; - - pr_debug("siccuart_console_read() called\n"); - - c = 0; - w = s; - while (c < count) { - if(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL) { - *w++ = readb(port->uart_base + BL_SICC_RBR); - c++; - } else { - // nothing more to get, return - return c; - } - } - // return the count - return c; -} -#endif - -/* - * Print a string to the serial port trying not to disturb - * any possible real use of the port... - * - * The console_lock must be held when we get here. - */ -static void siccuart_console_write(struct console *co, const char *s, u_int count) -{ - struct SICC_port *port = &sicc_ports[co->index]; - unsigned int old_cr; - int i; - - /* - * First save the CR then disable the interrupts - */ - old_cr = readb(port->uart_base + BL_SICC_TxCR); - writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base + BL_SICC_TxCR); - - /* - * Now, do each character - */ - for (i = 0; i < count; i++) { - while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL); - writeb(s[i], port->uart_base + BL_SICC_TBR); - if (s[i] == '\n') { - while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL); - writeb('\r', port->uart_base + BL_SICC_TBR); - } - } - - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ - while ((readb(port->uart_base + BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL); - writeb(old_cr, port->uart_base + BL_SICC_TxCR); -} - -/* - * Receive character from the serial port - */ -static int siccuart_console_wait_key(struct console *co) -{ - struct SICC_port *port = &sicc_ports[co->index]; - int c; - - while(!(readb(port->uart_base + BL_SICC_LSR) & _LSR_RBR_FULL)); - c = readb(port->uart_base + BL_SICC_RBR); - return c; -} - -static struct tty_driver *siccuart_console_device(struct console *c, int *index) -{ - *index = c->index; - return siccnormal_driver; -} - -static int __init siccuart_console_setup(struct console *co, char *options) -{ - struct SICC_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - u_int cflag = CREAD | HUPCL | CLOCAL; - u_int lcr_h, quot; - - - if (co->index >= SERIAL_SICC_NR) - co->index = 0; - - port = &sicc_ports[co->index]; - - if (port->uart_base == 0) - port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE); - - if (options) { - char *s = options; - baud = simple_strtoul(s, NULL, 10); - while (*s >= '0' && *s <= '9') - s++; - if (*s) parity = *s++; - if (*s) bits = *s - '0'; - } - - /* - * Now construct a cflag setting. - */ - switch (baud) { - case 1200: cflag |= B1200; break; - case 2400: cflag |= B2400; break; - case 4800: cflag |= B4800; break; - default: cflag |= B9600; baud = 9600; break; - case 19200: cflag |= B19200; break; - case 38400: cflag |= B38400; break; - case 57600: cflag |= B57600; break; - case 115200: cflag |= B115200; break; - } - switch (bits) { - case 7: cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; break; - default: cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; break; - } - switch (parity) { - case 'o': - case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD; break; - case 'e': - case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE | _LCR_PTY_ODD; break; - } - - co->cflag = cflag; - - - { - // a copy of is inserted here ppc403SetBaud(com_port, (int)9600); - unsigned long divisor, clockSource, temp; - unsigned int rate = baud; - - /* Ensure CICCR[7] is 0 to select Internal Baud Clock */ - powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF)); - - /* Determine Internal Baud Clock Frequency */ - /* powerpcMfclkgpcr() reads DCR 0x120 - the*/ - /* SCCR (Serial Clock Control Register) on Vesta */ - temp = powerpcMfclkgpcr(); - - if(temp & 0x00000080) { - clockSource = 324000000; - } - else { - clockSource = 216000000; - } - clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18); - divisor = clockSource/(16*rate) - 1; - /* divisor has only 12 bits of resolution */ - if(divisor>0x00000FFF){ - divisor=0x00000FFF; - } - - quot = divisor; - } - - writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH ); - writeb( quot & 0x00000FF, port->uart_base + BL_SICC_BRDL ); - - /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */ - /* For now, do NOT use FIFOs since 403 UART did not have this */ - /* capability and this driver was inherited from 403UART. */ - writeb(_CTL2_EXTERN, port->uart_base + BL_SICC_CTL2); - - writeb(lcr_h, port->uart_base + BL_SICC_LCR); - writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR); - writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR); - - // writeb(, info->port->uart_base + BL_SICC_RCR ); - /* - * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt - * + Transmitter Empty interrupt + Transmitter error interrupt disabled & - * Stop mode when CTS active enabled & Transmit Break + Pattern Generation - * mode disabled. - */ - - writeb( 0x00, port->uart_base + BL_SICC_IrCR ); // disable IrDA - - readb(port->uart_base + BL_SICC_RBR); - - writeb(0xf8, port->uart_base + BL_SICC_LSR); /* reset bits 0-4 of LSR */ - - /* we will enable the port as we need it */ - - return 0; -} - -static struct console siccuart_cons = -{ - .name = SERIAL_SICC_NAME, - .write = siccuart_console_write, -#ifdef used_and_not_const_char_pointer - .read = siccuart_console_read, -#endif - .device = siccuart_console_device, - .wait_key = siccuart_console_wait_key, - .setup = siccuart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -void __init sicc_console_init(void) -{ - register_console(&siccuart_cons); -} - -#endif /* CONFIG_SERIAL_SICC_CONSOLE */ |
