diff options
Diffstat (limited to 'arch/powerpc')
37 files changed, 3726 insertions, 291 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 66a315e..328774b 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -351,7 +351,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on PPC_BOOK3S && EXPERIMENTAL + depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 1a54a3b..42dcd3f4 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -112,6 +112,11 @@ KBUILD_CFLAGS += $(call cc-option,-mspe=no) # kernel considerably. KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time) +# FIXME: the module load should be taught about the additional relocs +# generated by this. +# revert to pre-gcc-4.4 behaviour of .eh_frame +KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) + # Never use string load/store instructions as they are # often slow when they are implemented at all KBUILD_CFLAGS += -mno-string diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 27db893..9d3bd4c 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -519,7 +519,7 @@ void ibm440ep_fixup_clocks(unsigned int sys_clk, { unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0); - /* serial clocks beed fixup based on int/ext */ + /* serial clocks need fixup based on int/ext */ eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk); eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk); eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk); @@ -532,7 +532,7 @@ void ibm440gx_fixup_clocks(unsigned int sys_clk, { unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); - /* serial clocks beed fixup based on int/ext */ + /* serial clocks need fixup based on int/ext */ eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk); eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk); } @@ -543,10 +543,10 @@ void ibm440spe_fixup_clocks(unsigned int sys_clk, { unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); - /* serial clocks beed fixup based on int/ext */ - eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk); - eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk); - eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk); + /* serial clocks need fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk); } void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts new file mode 100644 index 0000000..abcd0ca --- /dev/null +++ b/arch/powerpc/boot/dts/icon.dts @@ -0,0 +1,447 @@ +/* + * Device Tree Source for Mosaix Technologies, Inc. ICON board + * + * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "mosaixtech,icon"; + compatible = "mosaixtech,icon"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <0x00c 0x002>; + }; + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + /* addr-child addr-parent size */ + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 + 0xc 0x00000000 0xc 0x00000000 0x20000000 + 0xd 0x00000000 0xd 0x00000000 0x80000000 + 0xd 0x80000000 0xd 0x80000000 0x80000000 + 0xe 0x00000000 0xe 0x00000000 0x80000000 + 0xe 0x80000000 0xe 0x80000000 0x80000000 + 0xf 0x00000000 0xf 0x00000000 0x80000000 + 0xf 0x80000000 0xf 0x80000000 0x80000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 + /*RXEOB*/ 0x1 &UIC1 0x7 0x4 + /*SERR*/ 0x2 &UIC1 0x1 0x4 + /*TXDE*/ 0x3 &UIC1 0x2 0x4 + /*RXDE*/ 0x4 &UIC1 0x3 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; + + SysACE_CompactFlash: sysace@1,0 { + compatible = "xlnx,sysace"; + interrupt-parent = <&UIC2>; + interrupts = <24 0x4>; + reg = <0x00000001 0x00000000 0x10000>; + }; + }; + + UART0: serial@f0000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000200 0x00000008>; + virtual-reg = <0xa0000200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@f0000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000300 0x00000008>; + virtual-reg = <0xa0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + + UART2: serial@f0000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000600 0x00000008>; + virtual-reg = <0xa0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x5 0x4>; + }; + + IIC0: i2c@f0000400 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@f0000500 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + EMAC0: ethernet@f0000800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xf0000800 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "gmii"; + phy-map = <0x00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x20 to 0x2f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@f0000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 8cf2c0c..7c3be5e 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -44,6 +44,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 4173af3..0f52624 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -20,10 +20,8 @@ aliases { ethernet0 = &enet0; ethernet1 = &enet1; -/* ethernet2 = &enet2; ethernet3 = &enet3; -*/ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; @@ -254,7 +252,6 @@ }; }; -/* eTSEC 3/4 are currently broken enet2: ethernet@26000 { #address-cells = <1>; #size-cells = <1>; @@ -310,7 +307,6 @@ }; }; }; - */ serial0: serial@4500 { cell-index = <0>; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts index 5bd1011..3375c2a 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -215,6 +215,18 @@ clock-frequency = <0>; }; + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x80>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0>; + interrupt-parent = <&mpic>; + }; + global-utilities@e0000 { //global utilities block compatible = "fsl,mpc8572-guts"; reg = <0xe0000 0x1000>; @@ -243,8 +255,7 @@ protected-sources = < 31 32 33 37 38 39 /* enet2 enet3 */ 76 77 78 79 26 42 /* dma2 pci2 serial*/ - 0xe0 0xe1 0xe2 0xe3 /* msi */ - 0xe4 0xe5 0xe6 0xe7 + 0xe4 0xe5 0xe6 0xe7 /* msi */ >; }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts index 0efc345..e7b477f 100644 --- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -154,12 +154,8 @@ msi@41600 { compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; + msi-available-ranges = <0x80 0x80>; interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 0xe4 0 0xe5 0 0xe6 0 @@ -190,6 +186,7 @@ 0x1 0x2 0x3 0x4 /* pci slot */ 0x9 0xa 0xb 0xc /* usb */ 0x6 0x7 0xe 0x5 /* Audio elgacy SATA */ + 0xe0 0xe1 0xe2 0xe3 /* msi */ >; }; }; diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts new file mode 100644 index 0000000..7fad2df2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -0,0 +1,698 @@ +/* + * P1021 MDS Device Tree Source + * + * Copyright 2010 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P1021"; + compatible = "fsl,P1021MDS"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1021@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1021@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + /* NAND Flash, BCSR, PMC0/1*/ + ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf8010000 0x00020000 + 0x3 0x0 0x0 0xf8020000 0x00020000>; + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x0 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 5MB for Compressed Root file System Image */ + reg = <0x00600000 0x00500000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@b00000 { + /* 6MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00600000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 14MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00e00000>; + label = "NAND (RW) Writable User area"; + }; + + partition@1f00000 { + /* 1MB for microcode */ + reg = <0x01f00000 0x00100000>; + label = "NAND (RO) QE Ucode"; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + }; + + pib@2,0 { + compatible = "fsl,p1021mds-pib"; + reg = <2 0 0x10000>; + }; + + pib@3,0 { + compatible = "fsl,p1021mds-pib"; + reg = <3 0 0x10000>; + }; + }; + + soc@ffe00000 { + + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1021-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1021-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p1021-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + espi,num-ss-bits = <4>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1021-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <1 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + reg = <0x4>; + }; + }; + + mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@B0000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB0000 0x1000>; + interrupts = <29 2 30 2 34 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB4000 0x1000>; + interrupts = <17 2 18 2 24 2>; + }; + }; + + enet1: ethernet@B1000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + phy-handle = <&phy4>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB1000 0x1000>; + interrupts = <35 2 36 2 40 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB5000 0x1000>; + interrupts = <51 2 52 2 67 2>; + }; + }; + + enet2: ethernet@B2000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + queue-group@0{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB2000 0x1000>; + interrupts = <31 2 32 2 33 2>; + }; + queue-group@1{ + #address-cells = <1>; + #size-cells = <1>; + reg = <0xB6000 0x1000>; + interrupts = <25 2 26 2 27 2>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,p1021-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", + "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1021-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1021-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 +*/ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe@ffe80000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <63 2 60 2>; //high:47 low:44 + interrupt-parent = <&mpic>; + }; + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts index d2af32e..81636c0 100644 --- a/arch/powerpc/boot/dts/redwood.dts +++ b/arch/powerpc/boot/dts/redwood.dts @@ -234,10 +234,132 @@ has-inverted-stacr-oc; has-new-stacr-staopc; }; + }; + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + /* This drives busses 10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x30 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; }; + chosen { linux,stdout-path = "/plb/opb/serial@ef600200"; }; diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig new file mode 100644 index 0000000..277f88c --- /dev/null +++ b/arch/powerpc/configs/44x/icon_defconfig @@ -0,0 +1,1451 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.34-rc7 +# Fri May 21 17:40:22 2010 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_32 is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_PPC_ADV_DEBUG_REGS=y +CONFIG_PPC_ADV_DEBUG_IACS=4 +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DVCS=2 +CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_LOGBUFFER is not set +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SAM440EP is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +# CONFIG_WARP is not set +# CONFIG_ARCHES is not set +# CONFIG_CANYONLANDS is not set +# CONFIG_GLACIER is not set +# CONFIG_REDWOOD is not set +# CONFIG_EIGER is not set +# CONFIG_YOSEMITE is not set +CONFIG_ICON=y +# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set +CONFIG_PPC44x_SIMPLE=y +# CONFIG_PPC4xx_GPIO is not set +CONFIG_440SPe=y +CONFIG_STDBINUTILS=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_EXTRA_TARGETS="" +# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XILINX_SYSACE=y +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_FUSION=y +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=y +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=y +CONFIG_FUSION_LOGGING=y + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# The newer stack is recommended. +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_BOOTCOUNT is not set +# CONFIG_DISPLAY_PDSP1880 is not set +# CONFIG_MUCMC52_IO is not set +# CONFIG_UC101_IO is not set +# CONFIG_SRAM is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_IBM_IIC=y +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_LPC_SCH is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SM501=y +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_LOGFS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_PPC4XX is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index 725634f..4b50941 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -42,7 +42,7 @@ extern struct ppc64_caches ppc64_caches; #endif /* __powerpc64__ && ! __ASSEMBLY__ */ #if !defined(__ASSEMBLY__) -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly"))) #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index e3cba4e..b0b2113 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -70,6 +70,7 @@ struct pt_regs; extern int machine_check_generic(struct pt_regs *regs); extern int machine_check_4xx(struct pt_regs *regs); extern int machine_check_440A(struct pt_regs *regs); +extern int machine_check_e500mc(struct pt_regs *regs); extern int machine_check_e500(struct pt_regs *regs); extern int machine_check_e200(struct pt_regs *regs); extern int machine_check_47x(struct pt_regs *regs); diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index a6ca6da..2a9cd74 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -2,6 +2,18 @@ #define _ASM_POWERPC_KEXEC_H #ifdef __KERNEL__ +#ifdef CONFIG_FSL_BOOKE + +/* + * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory + * and therefore we can only deal with memory within this range + */ +#define KEXEC_SOURCE_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL) +#define KEXEC_DESTINATION_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL) +#define KEXEC_CONTROL_MEMORY_LIMIT (2 * 1024 * 1024 * 1024UL) + +#else + /* * Maximum page that is mapped directly into kernel memory. * XXX: Since we copy virt we can use any page we allocate @@ -21,6 +33,7 @@ /* TASK_SIZE, probably left over from use_mm ?? */ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE #endif +#endif #define KEXEC_CONTROL_PAGE_SIZE 4096 diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h index 19a661b..675e159 100644 --- a/arch/powerpc/include/asm/macio.h +++ b/arch/powerpc/include/asm/macio.h @@ -123,10 +123,6 @@ static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev) */ struct macio_driver { - char *name; - struct of_device_id *match_table; - struct module *owner; - int (*probe)(struct macio_dev* dev, const struct of_device_id *match); int (*remove)(struct macio_dev* dev); diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index bfc4e02..358ff14 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -162,14 +162,6 @@ do { \ #endif /* !CONFIG_HUGETLB_PAGE */ -#ifdef MODULE -#define __page_aligned __attribute__((__aligned__(PAGE_SIZE))) -#else -#define __page_aligned \ - __attribute__((__aligned__(PAGE_SIZE), \ - __section__(".data.page_aligned"))) -#endif - #define VM_DATA_DEFAULT_FLAGS \ (test_thread_flag(TIF_32BIT) ? \ VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64) diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 5304a37..2360317 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -4,6 +4,12 @@ * are not true Book E PowerPCs, they borrowed a number of features * before Book E was finalized, and are included here as well. Unfortunatly, * they sometimes used different locations than true Book E CPUs did. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * Copyright 2009-2010 Freescale Semiconductor, Inc. */ #ifdef __KERNEL__ #ifndef __ASM_POWERPC_REG_BOOKE_H__ @@ -88,6 +94,7 @@ #define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ #define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */ #define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */ +#define SPRN_MCARU 0x239 /* Machine Check Address Register Upper */ #define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ #define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ #define SPRN_MCSR 0x23C /* Machine Check Status Register */ @@ -196,8 +203,11 @@ #define PPC47x_MCSR_IPR 0x00400000 /* Imprecise Machine Check Exception */ #ifdef CONFIG_E500 +/* All e500 */ #define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ #define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ + +/* e500v1/v2 */ #define MCSR_DCP_PERR 0x20000000UL /* D-Cache Push Parity Error */ #define MCSR_DCPERR 0x10000000UL /* D-Cache Parity Error */ #define MCSR_BUS_IAERR 0x00000080UL /* Instruction Address Error */ @@ -209,12 +219,20 @@ #define MCSR_BUS_IPERR 0x00000002UL /* Instruction parity Error */ #define MCSR_BUS_RPERR 0x00000001UL /* Read parity Error */ -/* e500 parts may set unused bits in MCSR; mask these off */ -#define MCSR_MASK (MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \ - MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \ - MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \ - MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR) +/* e500mc */ +#define MCSR_DCPERR_MC 0x20000000UL /* D-Cache Parity Error */ +#define MCSR_L2MMU_MHIT 0x04000000UL /* Hit on multiple TLB entries */ +#define MCSR_NMI 0x00100000UL /* Non-Maskable Interrupt */ +#define MCSR_MAV 0x00080000UL /* MCAR address valid */ +#define MCSR_MEA 0x00040000UL /* MCAR is effective address */ +#define MCSR_IF 0x00010000UL /* Instruction Fetch */ +#define MCSR_LD 0x00008000UL /* Load */ +#define MCSR_ST 0x00004000UL /* Store */ +#define MCSR_LDG 0x00002000UL /* Guarded Load */ +#define MCSR_TLBSYNC 0x00000002UL /* Multiple tlbsyncs detected */ +#define MCSR_BSL2_ERR 0x00000001UL /* Backside L2 cache error */ #endif + #ifdef CONFIG_E200 #define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ #define MCSR_CP_PERR 0x20000000UL /* Cache Push Parity Error */ @@ -225,11 +243,6 @@ #define MCSR_BUS_DRERR 0x00000008UL /* Read Bus Error on data load */ #define MCSR_BUS_WRERR 0x00000004UL /* Write Bus Error on buffered store or cache line push */ - -/* e200 parts may set unused bits in MCSR; mask these off */ -#define MCSR_MASK (MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \ - MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \ - MCSR_BUS_WRERR) #endif /* Bit definitions for the DBSR. */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8773263..58d0572 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -57,8 +57,12 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_E500) += idle_e500.o obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o -obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \ - swsusp_$(CONFIG_WORD_SIZE).o +obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o +ifeq ($(CONFIG_FSL_BOOKE),y) +obj-$(CONFIG_HIBERNATION) += swsusp_booke.o +else +obj-$(CONFIG_HIBERNATION) += swsusp_$(CONFIG_WORD_SIZE).o +endif obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 9556be9..87aa0f3 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1840,7 +1840,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_cpu_type = "ppc/e500mc", .oprofile_type = PPC_OPROFILE_FSL_EMB, .cpu_setup = __setup_cpu_e500mc, - .machine_check = machine_check_e500, + .machine_check = machine_check_e500mc, .platform = "ppce500mc", }, { /* default match */ diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 8c066d6..b46f2e0 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -163,6 +163,7 @@ static void crash_kexec_prepare_cpus(int cpu) } /* wait for all the CPUs to hit real mode but timeout if they don't come in */ +#ifdef CONFIG_PPC_STD_MMU_64 static void crash_kexec_wait_realmode(int cpu) { unsigned int msecs; @@ -187,6 +188,7 @@ static void crash_kexec_wait_realmode(int cpu) } mb(); } +#endif /* * This function will be called by secondary cpus or by kexec cpu @@ -445,7 +447,9 @@ void default_machine_crash_shutdown(struct pt_regs *regs) crash_kexec_prepare_cpus(crashing_cpu); cpu_set(crashing_cpu, cpus_in_crash); crash_kexec_stop_spus(); +#ifdef CONFIG_PPC_STD_MMU_64 crash_kexec_wait_realmode(crashing_cpu); +#endif if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(1, 0); } diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S new file mode 100644 index 0000000..beb4d78 --- /dev/null +++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S @@ -0,0 +1,237 @@ + +/* 1. Find the index of the entry we're executing in */ + bl invstr /* Find our address */ +invstr: mflr r6 /* Make it accessible */ + mfmsr r7 + rlwinm r4,r7,27,31,31 /* extract MSR[IS] */ + mfspr r7, SPRN_PID0 + slwi r7,r7,16 + or r7,r7,r4 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ + mfspr r7,SPRN_MAS1 + andis. r7,r7,MAS1_VALID@h + bne match_TLB + + mfspr r7,SPRN_MMUCFG + rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ + cmpwi r7,3 + bne match_TLB /* skip if NPIDS != 3 */ + + mfspr r7,SPRN_PID1 + slwi r7,r7,16 + or r7,r7,r4 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */ + mfspr r7,SPRN_MAS1 + andis. r7,r7,MAS1_VALID@h + bne match_TLB + mfspr r7, SPRN_PID2 + slwi r7,r7,16 + or r7,r7,r4 + mtspr SPRN_MAS6,r7 + tlbsx 0,r6 /* Fall through, we had to match */ + +match_TLB: + mfspr r7,SPRN_MAS0 + rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ + + mfspr r7,SPRN_MAS1 /* Insure IPROT set */ + oris r7,r7,MAS1_IPROT@h + mtspr SPRN_MAS1,r7 + tlbwe + +/* 2. Invalidate all entries except the entry we're executing in */ + mfspr r9,SPRN_TLB1CFG + andi. r9,r9,0xfff + li r6,0 /* Set Entry counter to 0 */ +1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r7,SPRN_MAS1 + rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ + cmpw r3,r6 + beq skpinv /* Dont update the current execution TLB */ + mtspr SPRN_MAS1,r7 + tlbwe + isync +skpinv: addi r6,r6,1 /* Increment */ + cmpw r6,r9 /* Are we done? */ + bne 1b /* If not, repeat */ + + /* Invalidate TLB0 */ + li r6,0x04 + tlbivax 0,r6 + TLBSYNC + /* Invalidate TLB1 */ + li r6,0x0c + tlbivax 0,r6 + TLBSYNC + +/* 3. Setup a temp mapping and jump to it */ + andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */ + addi r5, r5, 0x1 + lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r7 + tlbre + + /* grab and fixup the RPN */ + mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */ + rlwinm r6,r6,25,27,31 + li r8,-1 + addi r6,r6,10 + slw r6,r8,r6 /* convert to mask */ + + bl 1f /* Find our address */ +1: mflr r7 + + mfspr r8,SPRN_MAS3 +#ifdef CONFIG_PHYS_64BIT + mfspr r23,SPRN_MAS7 +#endif + and r8,r6,r8 + subfic r9,r6,-4096 + and r9,r9,r7 + + or r25,r8,r9 + ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR) + + /* Just modify the entry ID and EPN for the temp mapping */ + lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ + mtspr SPRN_MAS0,r7 + xori r6,r4,1 /* Setup TMP mapping in the other Address space */ + slwi r6,r6,12 + oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l + mtspr SPRN_MAS1,r6 + mfspr r6,SPRN_MAS2 + li r7,0 /* temp EPN = 0 */ + rlwimi r7,r6,0,20,31 + mtspr SPRN_MAS2,r7 + mtspr SPRN_MAS3,r8 + tlbwe + + xori r6,r4,1 + slwi r6,r6,5 /* setup new context with other address space */ + bl 1f /* Find our address */ +1: mflr r9 + rlwimi r7,r9,0,20,31 + addi r7,r7,(2f - 1b) + mtspr SPRN_SRR0,r7 + mtspr SPRN_SRR1,r6 + rfi +2: +/* 4. Clear out PIDs & Search info */ + li r6,0 + mtspr SPRN_MAS6,r6 + mtspr SPRN_PID0,r6 + + mfspr r7,SPRN_MMUCFG + rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ + cmpwi r7,3 + bne 2f /* skip if NPIDS != 3 */ + + mtspr SPRN_PID1,r6 + mtspr SPRN_PID2,r6 + +/* 5. Invalidate mapping we started in */ +2: + lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r6,SPRN_MAS1 + rlwinm r6,r6,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r6 + tlbwe + /* Invalidate TLB1 */ + li r9,0x0c + tlbivax 0,r9 + TLBSYNC + +/* The mapping only needs to be cache-coherent on SMP */ +#ifdef CONFIG_SMP +#define M_IF_SMP MAS2_M +#else +#define M_IF_SMP 0 +#endif + +#if defined(ENTRY_MAPPING_BOOT_SETUP) + +/* 6. Setup KERNELBASE mapping in TLB1[0] */ + lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ + mtspr SPRN_MAS0,r6 + lis r6,(MAS1_VALID|MAS1_IPROT)@h + ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l + mtspr SPRN_MAS1,r6 + lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h + ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l + mtspr SPRN_MAS2,r6 + mtspr SPRN_MAS3,r8 + tlbwe + +/* 7. Jump to KERNELBASE mapping */ + lis r6,(KERNELBASE & ~0xfff)@h + ori r6,r6,(KERNELBASE & ~0xfff)@l + +#elif defined(ENTRY_MAPPING_KEXEC_SETUP) +/* + * 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp + * mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This + * will cover the first 2GiB of memory. + */ + + lis r10, (MAS1_VALID|MAS1_IPROT)@h + ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l + li r11, 0 + li r0, 8 + mtctr r0 + +next_tlb_setup: + addi r0, r11, 3 + rlwinm r0, r0, 16, 4, 15 // Compute esel + rlwinm r9, r11, 28, 0, 3 // Compute [ER]PN + oris r0, r0, (MAS0_TLBSEL(1))@h + mtspr SPRN_MAS0,r0 + mtspr SPRN_MAS1,r10 + mtspr SPRN_MAS2,r9 + ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR) + mtspr SPRN_MAS3,r9 + tlbwe + addi r11, r11, 1 + bdnz+ next_tlb_setup + +/* 7. Jump to our 1:1 mapping */ + li r6, 0 + +#else + #error You need to specify the mapping or not use this at all. +#endif + + lis r7,MSR_KERNEL@h + ori r7,r7,MSR_KERNEL@l + bl 1f /* Find our address */ +1: mflr r9 + rlwimi r6,r9,0,20,31 + addi r6,r6,(2f - 1b) + add r6, r6, r25 + mtspr SPRN_SRR0,r6 + mtspr SPRN_SRR1,r7 + rfi /* start execution out of TLB1[0] entry */ + +/* 8. Clear out the temp mapping */ +2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ + mtspr SPRN_MAS0,r7 + tlbre + mfspr r8,SPRN_MAS1 + rlwinm r8,r8,0,2,0 /* clear IPROT */ + mtspr SPRN_MAS1,r8 + tlbwe + /* Invalidate TLB1 */ + li r9,0x0c + tlbivax 0,r9 + TLBSYNC diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index edd4a57..4faeba2 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -94,204 +94,10 @@ _ENTRY(_start); */ _ENTRY(__early_start) -/* 1. Find the index of the entry we're executing in */ - bl invstr /* Find our address */ -invstr: mflr r6 /* Make it accessible */ - mfmsr r7 - rlwinm r4,r7,27,31,31 /* extract MSR[IS] */ - mfspr r7, SPRN_PID0 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ - mfspr r7,SPRN_MAS1 - andis. r7,r7,MAS1_VALID@h - bne match_TLB - - mfspr r7,SPRN_MMUCFG - rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ - cmpwi r7,3 - bne match_TLB /* skip if NPIDS != 3 */ - - mfspr r7,SPRN_PID1 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */ - mfspr r7,SPRN_MAS1 - andis. r7,r7,MAS1_VALID@h - bne match_TLB - mfspr r7, SPRN_PID2 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* Fall through, we had to match */ - -match_TLB: - mfspr r7,SPRN_MAS0 - rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ - - mfspr r7,SPRN_MAS1 /* Insure IPROT set */ - oris r7,r7,MAS1_IPROT@h - mtspr SPRN_MAS1,r7 - tlbwe - -/* 2. Invalidate all entries except the entry we're executing in */ - mfspr r9,SPRN_TLB1CFG - andi. r9,r9,0xfff - li r6,0 /* Set Entry counter to 0 */ -1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r7,SPRN_MAS1 - rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ - cmpw r3,r6 - beq skpinv /* Dont update the current execution TLB */ - mtspr SPRN_MAS1,r7 - tlbwe - isync -skpinv: addi r6,r6,1 /* Increment */ - cmpw r6,r9 /* Are we done? */ - bne 1b /* If not, repeat */ - - /* Invalidate TLB0 */ - li r6,0x04 - tlbivax 0,r6 - TLBSYNC - /* Invalidate TLB1 */ - li r6,0x0c - tlbivax 0,r6 - TLBSYNC - -/* 3. Setup a temp mapping and jump to it */ - andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */ - addi r5, r5, 0x1 - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ - mtspr SPRN_MAS0,r7 - tlbre - - /* grab and fixup the RPN */ - mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */ - rlwinm r6,r6,25,27,31 - li r8,-1 - addi r6,r6,10 - slw r6,r8,r6 /* convert to mask */ - - bl 1f /* Find our address */ -1: mflr r7 - - mfspr r8,SPRN_MAS3 -#ifdef CONFIG_PHYS_64BIT - mfspr r23,SPRN_MAS7 -#endif - and r8,r6,r8 - subfic r9,r6,-4096 - and r9,r9,r7 - - or r25,r8,r9 - ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR) - - /* Just modify the entry ID and EPN for the temp mapping */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ - mtspr SPRN_MAS0,r7 - xori r6,r4,1 /* Setup TMP mapping in the other Address space */ - slwi r6,r6,12 - oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l - mtspr SPRN_MAS1,r6 - mfspr r6,SPRN_MAS2 - li r7,0 /* temp EPN = 0 */ - rlwimi r7,r6,0,20,31 - mtspr SPRN_MAS2,r7 - mtspr SPRN_MAS3,r8 - tlbwe - - xori r6,r4,1 - slwi r6,r6,5 /* setup new context with other address space */ - bl 1f /* Find our address */ -1: mflr r9 - rlwimi r7,r9,0,20,31 - addi r7,r7,(2f - 1b) - mtspr SPRN_SRR0,r7 - mtspr SPRN_SRR1,r6 - rfi -2: -/* 4. Clear out PIDs & Search info */ - li r6,0 - mtspr SPRN_MAS6,r6 - mtspr SPRN_PID0,r6 - - mfspr r7,SPRN_MMUCFG - rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ - cmpwi r7,3 - bne 2f /* skip if NPIDS != 3 */ - mtspr SPRN_PID1,r6 - mtspr SPRN_PID2,r6 - -/* 5. Invalidate mapping we started in */ -2: - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r6,SPRN_MAS1 - rlwinm r6,r6,0,2,0 /* clear IPROT */ - mtspr SPRN_MAS1,r6 - tlbwe - /* Invalidate TLB1 */ - li r9,0x0c - tlbivax 0,r9 - TLBSYNC - -/* The mapping only needs to be cache-coherent on SMP */ -#ifdef CONFIG_SMP -#define M_IF_SMP MAS2_M -#else -#define M_IF_SMP 0 -#endif - -/* 6. Setup KERNELBASE mapping in TLB1[0] */ - lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ - mtspr SPRN_MAS0,r6 - lis r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l - mtspr SPRN_MAS1,r6 - lis r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h - ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l - mtspr SPRN_MAS2,r6 - mtspr SPRN_MAS3,r8 - tlbwe - -/* 7. Jump to KERNELBASE mapping */ - lis r6,(KERNELBASE & ~0xfff)@h - ori r6,r6,(KERNELBASE & ~0xfff)@l - lis r7,MSR_KERNEL@h - ori r7,r7,MSR_KERNEL@l - bl 1f /* Find our address */ -1: mflr r9 - rlwimi r6,r9,0,20,31 - addi r6,r6,(2f - 1b) - mtspr SPRN_SRR0,r6 - mtspr SPRN_SRR1,r7 - rfi /* start execution out of TLB1[0] entry */ - -/* 8. Clear out the temp mapping */ -2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r8,SPRN_MAS1 - rlwinm r8,r8,0,2,0 /* clear IPROT */ - mtspr SPRN_MAS1,r8 - tlbwe - /* Invalidate TLB1 */ - li r9,0x0c - tlbivax 0,r9 - TLBSYNC +#define ENTRY_MAPPING_BOOT_SETUP +#include "fsl_booke_entry_mapping.S" +#undef ENTRY_MAPPING_BOOT_SETUP /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index c533525..bc47352 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -378,17 +378,6 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, * single-stepped a copy of the instruction. The address of this * copy is p->ainsn.insn. */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) -{ - int ret; - unsigned int insn = *p->ainsn.insn; - - regs->nip = (unsigned long)p->addr; - ret = emulate_step(regs, insn); - if (ret == 0) - regs->nip = (unsigned long)p->addr + 4; -} - static int __kprobes post_kprobe_handler(struct pt_regs *regs) { struct kprobe *cur = kprobe_running(); @@ -406,7 +395,8 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs) cur->post_handler(cur, regs, 0); } - resume_execution(cur, regs); + /* Adjust nip to after the single-stepped instruction */ + regs->nip = (unsigned long)cur->addr + 4; regs->msr |= kcb->kprobe_saved_msr; /*Restore back the original saved kprobes variables and continue. */ diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 8043d1b..dc66d52 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -711,6 +711,22 @@ relocate_new_kernel: /* r4 = reboot_code_buffer */ /* r5 = start_address */ +#ifdef CONFIG_FSL_BOOKE + + mr r29, r3 + mr r30, r4 + mr r31, r5 + +#define ENTRY_MAPPING_KEXEC_SETUP +#include "fsl_booke_entry_mapping.S" +#undef ENTRY_MAPPING_KEXEC_SETUP + + mr r3, r29 + mr r4, r30 + mr r5, r31 + + li r0, 0 +#else li r0, 0 /* @@ -727,6 +743,7 @@ relocate_new_kernel: rfi 1: +#endif /* from this point address translation is turned off */ /* and interrupts are disabled */ diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index bc9f39d..3b4dcc8 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -101,7 +101,7 @@ EXPORT_SYMBOL(pci_dram_offset); EXPORT_SYMBOL(start_thread); EXPORT_SYMBOL(kernel_thread); -#ifndef CONFIG_BOOKE +#ifdef CONFIG_PPC_FPU EXPORT_SYMBOL_GPL(cvt_df); EXPORT_SYMBOL_GPL(cvt_fd); #endif diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S new file mode 100644 index 0000000..11a3930 --- /dev/null +++ b/arch/powerpc/kernel/swsusp_booke.S @@ -0,0 +1,193 @@ +/* + * Based on swsusp_32.S, modified for FSL BookE by + * Anton Vorontsov <avorontsov@ru.mvista.com> + * Copyright (c) 2009-2010 MontaVista Software, LLC. + */ + +#include <linux/threads.h> +#include <asm/processor.h> +#include <asm/page.h> +#include <asm/cputable.h> +#include <asm/thread_info.h> +#include <asm/ppc_asm.h> +#include <asm/asm-offsets.h> +#include <asm/mmu.h> + +/* + * Structure for storing CPU registers on the save area. + */ +#define SL_SP 0 +#define SL_PC 4 +#define SL_MSR 8 +#define SL_TCR 0xc +#define SL_SPRG0 0x10 +#define SL_SPRG1 0x14 +#define SL_SPRG2 0x18 +#define SL_SPRG3 0x1c +#define SL_SPRG4 0x20 +#define SL_SPRG5 0x24 +#define SL_SPRG6 0x28 +#define SL_SPRG7 0x2c +#define SL_TBU 0x30 +#define SL_TBL 0x34 +#define SL_R2 0x38 +#define SL_CR 0x3c +#define SL_LR 0x40 +#define SL_R12 0x44 /* r12 to r31 */ +#define SL_SIZE (SL_R12 + 80) + + .section .data + .align 5 + +_GLOBAL(swsusp_save_area) + .space SL_SIZE + + + .section .text + .align 5 + +_GLOBAL(swsusp_arch_suspend) + lis r11,swsusp_save_area@h + ori r11,r11,swsusp_save_area@l + + mflr r0 + stw r0,SL_LR(r11) + mfcr r0 + stw r0,SL_CR(r11) + stw r1,SL_SP(r11) + stw r2,SL_R2(r11) + stmw r12,SL_R12(r11) + + /* Save MSR & TCR */ + mfmsr r4 + stw r4,SL_MSR(r11) + mfspr r4,SPRN_TCR + stw r4,SL_TCR(r11) + + /* Get a stable timebase and save it */ +1: mfspr r4,SPRN_TBRU + stw r4,SL_TBU(r11) + mfspr r5,SPRN_TBRL + stw r5,SL_TBL(r11) + mfspr r3,SPRN_TBRU + cmpw r3,r4 + bne 1b + + /* Save SPRGs */ + mfsprg r4,0 + stw r4,SL_SPRG0(r11) + mfsprg r4,1 + stw r4,SL_SPRG1(r11) + mfsprg r4,2 + stw r4,SL_SPRG2(r11) + mfsprg r4,3 + stw r4,SL_SPRG3(r11) + mfsprg r4,4 + stw r4,SL_SPRG4(r11) + mfsprg r4,5 + stw r4,SL_SPRG5(r11) + mfsprg r4,6 + stw r4,SL_SPRG6(r11) + mfsprg r4,7 + stw r4,SL_SPRG7(r11) + + /* Call the low level suspend stuff (we should probably have made + * a stackframe... + */ + bl swsusp_save + + /* Restore LR from the save area */ + lis r11,swsusp_save_area@h + ori r11,r11,swsusp_save_area@l + lwz r0,SL_LR(r11) + mtlr r0 + + blr + +_GLOBAL(swsusp_arch_resume) + sync + + /* Load ptr the list of pages to copy in r3 */ + lis r11,(restore_pblist)@h + ori r11,r11,restore_pblist@l + lwz r3,0(r11) + + /* Copy the pages. This is a very basic implementation, to + * be replaced by something more cache efficient */ +1: + li r0,256 + mtctr r0 + lwz r5,pbe_address(r3) /* source */ + lwz r6,pbe_orig_address(r3) /* destination */ +2: + lwz r8,0(r5) + lwz r9,4(r5) + lwz r10,8(r5) + lwz r11,12(r5) + addi r5,r5,16 + stw r8,0(r6) + stw r9,4(r6) + stw r10,8(r6) + stw r11,12(r6) + addi r6,r6,16 + bdnz 2b + lwz r3,pbe_next(r3) + cmpwi 0,r3,0 + bne 1b + + bl flush_dcache_L1 + bl flush_instruction_cache + + lis r11,swsusp_save_area@h + ori r11,r11,swsusp_save_area@l + + lwz r4,SL_SPRG0(r11) + mtsprg 0,r4 + lwz r4,SL_SPRG1(r11) + mtsprg 1,r4 + lwz r4,SL_SPRG2(r11) + mtsprg 2,r4 + lwz r4,SL_SPRG3(r11) + mtsprg 3,r4 + lwz r4,SL_SPRG4(r11) + mtsprg 4,r4 + lwz r4,SL_SPRG5(r11) + mtsprg 5,r4 + lwz r4,SL_SPRG6(r11) + mtsprg 6,r4 + lwz r4,SL_SPRG7(r11) + mtsprg 7,r4 + + /* restore the MSR */ + lwz r3,SL_MSR(r11) + mtmsr r3 + + /* Restore TB */ + li r3,0 + mtspr SPRN_TBWL,r3 + lwz r3,SL_TBU(r11) + lwz r4,SL_TBL(r11) + mtspr SPRN_TBWU,r3 + mtspr SPRN_TBWL,r4 + + /* Restore TCR and clear any pending bits in TSR. */ + lwz r4,SL_TCR(r11) + mtspr SPRN_TCR,r4 + lis r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h + mtspr SPRN_TSR,r4 + + /* Kick decrementer */ + li r0,1 + mtdec r0 + + /* Restore the callee-saved registers and return */ + lwz r0,SL_CR(r11) + mtcr r0 + lwz r2,SL_R2(r11) + lmw r12,SL_R12(r11) + lwz r1,SL_SP(r11) + lwz r0,SL_LR(r11) + mtlr r0 + + li r3,0 + blr diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 3031fc7..25fc339 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -1,5 +1,6 @@ /* * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Copyright 2007-2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -305,7 +306,7 @@ static inline int check_io_access(struct pt_regs *regs) #ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) #else -#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK) +#define get_mc_reason(regs) (mfspr(SPRN_MCSR)) #endif #define REASON_FP ESR_FP #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) @@ -421,6 +422,91 @@ int machine_check_47x(struct pt_regs *regs) return 0; } #elif defined(CONFIG_E500) +int machine_check_e500mc(struct pt_regs *regs) +{ + unsigned long mcsr = mfspr(SPRN_MCSR); + unsigned long reason = mcsr; + int recoverable = 1; + + printk("Machine check in kernel mode.\n"); + printk("Caused by (from MCSR=%lx): ", reason); + + if (reason & MCSR_MCP) + printk("Machine Check Signal\n"); + + if (reason & MCSR_ICPERR) { + printk("Instruction Cache Parity Error\n"); + + /* + * This is recoverable by invalidating the i-cache. + */ + mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI); + while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI) + ; + + /* + * This will generally be accompanied by an instruction + * fetch error report -- only treat MCSR_IF as fatal + * if it wasn't due to an L1 parity error. + */ + reason &= ~MCSR_IF; + } + + if (reason & MCSR_DCPERR_MC) { + printk("Data Cache Parity Error\n"); + recoverable = 0; + } + + if (reason & MCSR_L2MMU_MHIT) { + printk("Hit on multiple TLB entries\n"); + recoverable = 0; + } + + if (reason & MCSR_NMI) + printk("Non-maskable interrupt\n"); + + if (reason & MCSR_IF) { + printk("Instruction Fetch Error Report\n"); + recoverable = 0; + } + + if (reason & MCSR_LD) { + printk("Load Error Report\n"); + recoverable = 0; + } + + if (reason & MCSR_ST) { + printk("Store Error Report\n"); + recoverable = 0; + } + + if (reason & MCSR_LDG) { + printk("Guarded Load Error Report\n"); + recoverable = 0; + } + + if (reason & MCSR_TLBSYNC) + printk("Simultaneous tlbsync operations\n"); + + if (reason & MCSR_BSL2_ERR) { + printk("Level 2 Cache Error\n"); + recoverable = 0; + } + + if (reason & MCSR_MAV) { + u64 addr; + + addr = mfspr(SPRN_MCAR); + addr |= (u64)mfspr(SPRN_MCARU) << 32; + + printk("Machine Check %s Address: %#llx\n", + reason & MCSR_MEA ? "Effective" : "Physical", addr); + } + + mtspr(SPRN_MCSR, mcsr); + return mfspr(SPRN_MCSR) == 0 && recoverable; +} + int machine_check_e500(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index dcd01c8..8a0deef 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -223,19 +223,17 @@ SECTIONS #endif /* The initial task and kernel stack */ - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - INIT_TASK_DATA(THREAD_SIZE) - } + INIT_TASK_DATA_SECTION(THREAD_SIZE) - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { + .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) { PAGE_ALIGNED_DATA(PAGE_SIZE) } - .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { + .data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) { CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) } - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { + .data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) { READ_MOSTLY_DATA(L1_CACHE_BYTES) } diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index eeba0a7..69d668c 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -171,6 +171,17 @@ config ISS4xx help This option enables support for the IBM ISS simulation environment +config ICON + bool "Icon" + depends on 44x + default n + select PPC44x_SIMPLE + select 440SPe + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC440SPe evaluation board. + #config LUAN # bool "Luan" # depends on 44x diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index e8c23cc..5f7a29d 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -61,7 +61,8 @@ static char *board[] __initdata = { "amcc,redwood", "amcc,sequoia", "amcc,taishan", - "amcc,yosemite" + "amcc,yosemite", + "mosaixtech,icon" }; static int __init ppc44x_probe(void) diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index f0684c8..8fe87fc 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved. * * Author: Andy Fleming <afleming@freescale.com> * @@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) * Setup the architecture * */ +#ifdef CONFIG_SMP +extern void __init mpc85xx_smp_init(void); +#endif + static void __init mpc85xx_mds_setup_arch(void) { struct device_node *np; @@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void) } #endif +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + #ifdef CONFIG_QUICC_ENGINE np = of_find_compatible_node(NULL, NULL, "fsl,qe"); if (!np) { @@ -271,9 +279,49 @@ static void __init mpc85xx_mds_setup_arch(void) BCSR_UCC_RGMII, BCSR_UCC_RTBI); } + } else if (machine_is(p1021_mds)) { +#define BCSR11_ENET_MICRST (0x1 << 5) + /* Reset Micrel PHY */ + clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); } + iounmap(bcsr_regs); } + + if (machine_is(p1021_mds)) { +#define MPC85xx_PMUXCR_OFFSET 0x60 +#define MPC85xx_PMUXCR_QE0 0x00008000 +#define MPC85xx_PMUXCR_QE3 0x00001000 +#define MPC85xx_PMUXCR_QE9 0x00000040 +#define MPC85xx_PMUXCR_QE12 0x00000008 + static __be32 __iomem *pmuxcr; + + np = of_find_node_by_name(NULL, "global-utilities"); + + if (np) { + pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET; + + if (!pmuxcr) + printk(KERN_EMERG "Error: Alternate function" + " signal multiplex control register not" + " mapped!\n"); + else + /* P1021 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management singals in PMUXCR + * register. + */ + setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 | + MPC85xx_PMUXCR_QE3 | + MPC85xx_PMUXCR_QE9 | + MPC85xx_PMUXCR_QE12); + + of_node_put(np); + } + + } #endif /* CONFIG_QUICC_ENGINE */ #ifdef CONFIG_SWIOTLB @@ -330,6 +378,16 @@ static struct of_device_id mpc85xx_ids[] = { {}, }; +static struct of_device_id p1021_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + { .compatible = "gianfar", }, + {}, +}; + static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -342,11 +400,22 @@ static int __init mpc85xx_publish_devices(void) return 0; } + +static int __init p1021_publish_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, p1021_ids, NULL); + + return 0; +} + machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); +machine_device_initcall(p1021_mds, p1021_publish_devices); machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier); +machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier); static void __init mpc85xx_mds_pic_init(void) { @@ -366,7 +435,7 @@ static void __init mpc85xx_mds_pic_init(void) mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS, + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); @@ -380,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void) if (!np) return; } - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); + if (machine_is(p1021_mds)) + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + else + qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); of_node_put(np); #endif /* CONFIG_QUICC_ENGINE */ } @@ -426,3 +499,26 @@ define_machine(mpc8569_mds) { .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif }; + +static int __init p1021_mds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1021MDS"); + +} + +define_machine(p1021_mds) { + .name = "P1021 MDS", + .probe = p1021_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; + diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 22667a0..4326b73 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -1066,7 +1066,7 @@ static int __init cell_iommu_fixed_mapping_init(void) fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT); fsize = lmb_phys_mem_size(); - if ((fbase + fsize) <= 0x800000000) + if ((fbase + fsize) <= 0x800000000ul) hbase = 0; /* use the device tree window */ else { /* If we're over 32 GB we need to cheat. We can't map all of diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index a7be144..962c2d8 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved. + * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. * * Author: Tony Li <tony.li@freescale.com> * Jason Jin <Jason.jin@freescale.com> @@ -22,14 +22,20 @@ #include <asm/prom.h> #include <asm/hw_irq.h> #include <asm/ppc-pci.h> +#include <asm/mpic.h> #include "fsl_msi.h" +LIST_HEAD(msi_head); + struct fsl_msi_feature { u32 fsl_pic_ip; u32 msiir_offset; }; -static struct fsl_msi *fsl_msi; +struct fsl_msi_cascade_data { + struct fsl_msi *msi_data; + int index; +}; static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg) { @@ -54,10 +60,12 @@ static struct irq_chip fsl_msi_chip = { static int fsl_msi_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { + struct fsl_msi *msi_data = h->host_data; struct irq_chip *chip = &fsl_msi_chip; irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING; + set_irq_chip_data(virq, msi_data); set_irq_chip_and_handler(virq, chip, handle_edge_irq); return 0; @@ -96,11 +104,12 @@ static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type) static void fsl_teardown_msi_irqs(struct pci_dev *pdev) { struct msi_desc *entry; - struct fsl_msi *msi_data = fsl_msi; + struct fsl_msi *msi_data; list_for_each_entry(entry, &pdev->msi_list, list) { if (entry->irq == NO_IRQ) continue; + msi_data = get_irq_data(entry->irq); set_irq_msi(entry->irq, NULL); msi_bitmap_free_hwirqs(&msi_data->bitmap, virq_to_hw(entry->irq), 1); @@ -111,9 +120,10 @@ static void fsl_teardown_msi_irqs(struct pci_dev *pdev) } static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, - struct msi_msg *msg) + struct msi_msg *msg, + struct fsl_msi *fsl_msi_data) { - struct fsl_msi *msi_data = fsl_msi; + struct fsl_msi *msi_data = fsl_msi_data; struct pci_controller *hose = pci_bus_to_host(pdev->bus); u32 base = 0; @@ -130,14 +140,19 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) { - int rc, hwirq; + int rc, hwirq = -ENOMEM; unsigned int virq; struct msi_desc *entry; struct msi_msg msg; - struct fsl_msi *msi_data = fsl_msi; + struct fsl_msi *msi_data; list_for_each_entry(entry, &pdev->msi_list, list) { - hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1); + list_for_each_entry(msi_data, &msi_head, list) { + hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1); + if (hwirq >= 0) + break; + } + if (hwirq < 0) { rc = hwirq; pr_debug("%s: fail allocating msi interrupt\n", @@ -154,25 +169,31 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) rc = -ENOSPC; goto out_free; } + set_irq_data(virq, msi_data); set_irq_msi(virq, entry); - fsl_compose_msi_msg(pdev, hwirq, &msg); + fsl_compose_msi_msg(pdev, hwirq, &msg, msi_data); write_msi_msg(virq, &msg); } return 0; out_free: + /* free by the caller of this function */ return rc; } static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) { unsigned int cascade_irq; - struct fsl_msi *msi_data = fsl_msi; + struct fsl_msi *msi_data; int msir_index = -1; u32 msir_value = 0; u32 intr_index; u32 have_shift = 0; + struct fsl_msi_cascade_data *cascade_data; + + cascade_data = (struct fsl_msi_cascade_data *)get_irq_data(irq); + msi_data = cascade_data->msi_data; raw_spin_lock(&desc->lock); if ((msi_data->feature & FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) { @@ -187,13 +208,13 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) if (unlikely(desc->status & IRQ_INPROGRESS)) goto unlock; - msir_index = (int)desc->handler_data; + msir_index = cascade_data->index; if (msir_index >= NR_MSI_REG) cascade_irq = NO_IRQ; desc->status |= IRQ_INPROGRESS; - switch (fsl_msi->feature & FSL_PIC_IP_MASK) { + switch (msi_data->feature & FSL_PIC_IP_MASK) { case FSL_PIC_IP_MPIC: msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x10); @@ -229,6 +250,30 @@ unlock: raw_spin_unlock(&desc->lock); } +static int fsl_of_msi_remove(struct of_device *ofdev) +{ + struct fsl_msi *msi = ofdev->dev.platform_data; + int virq, i; + struct fsl_msi_cascade_data *cascade_data; + + if (msi->list.prev != NULL) + list_del(&msi->list); + for (i = 0; i < NR_MSI_REG; i++) { + virq = msi->msi_virqs[i]; + if (virq != NO_IRQ) { + cascade_data = get_irq_data(virq); + kfree(cascade_data); + irq_dispose_mapping(virq); + } + } + if (msi->bitmap.bitmap) + msi_bitmap_free(&msi->bitmap); + iounmap(msi->msi_regs); + kfree(msi); + + return 0; +} + static int __devinit fsl_of_msi_probe(struct of_device *dev, const struct of_device_id *match) { @@ -239,15 +284,18 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev, int virt_msir; const u32 *p; struct fsl_msi_feature *features = match->data; + struct fsl_msi_cascade_data *cascade_data = NULL; + int len; + u32 offset; printk(KERN_DEBUG "Setting up Freescale MSI support\n"); msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL); if (!msi) { dev_err(&dev->dev, "No memory for MSI structure\n"); - err = -ENOMEM; - goto error_out; + return -ENOMEM; } + dev->dev.platform_data = msi; msi->irqhost = irq_alloc_host(dev->dev.of_node, IRQ_HOST_MAP_LINEAR, NR_MSI_IRQS, &fsl_msi_host_ops, 0); @@ -298,27 +346,47 @@ static int __devinit fsl_of_msi_probe(struct of_device *dev, err = -EINVAL; goto error_out; } + offset = 0; + p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len); + if (p) + offset = *p / IRQS_PER_MSI_REG; count /= sizeof(u32); - for (i = 0; i < count / 2; i++) { - if (i > NR_MSI_REG) - break; + for (i = 0; i < min(count / 2, NR_MSI_REG); i++) { virt_msir = irq_of_parse_and_map(dev->dev.of_node, i); if (virt_msir != NO_IRQ) { - set_irq_data(virt_msir, (void *)i); + cascade_data = kzalloc( + sizeof(struct fsl_msi_cascade_data), + GFP_KERNEL); + if (!cascade_data) { + dev_err(&dev->dev, + "No memory for MSI cascade data\n"); + err = -ENOMEM; + goto error_out; + } + msi->msi_virqs[i] = virt_msir; + cascade_data->index = i + offset; + cascade_data->msi_data = msi; + set_irq_data(virt_msir, (void *)cascade_data); set_irq_chained_handler(virt_msir, fsl_msi_cascade); } } - fsl_msi = msi; + list_add_tail(&msi->list, &msi_head); - WARN_ON(ppc_md.setup_msi_irqs); - ppc_md.setup_msi_irqs = fsl_setup_msi_irqs; - ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs; - ppc_md.msi_check_device = fsl_msi_check_device; + /* The multiple setting ppc_md.setup_msi_irqs will not harm things */ + if (!ppc_md.setup_msi_irqs) { + ppc_md.setup_msi_irqs = fsl_setup_msi_irqs; + ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs; + ppc_md.msi_check_device = fsl_msi_check_device; + } else if (ppc_md.setup_msi_irqs != fsl_setup_msi_irqs) { + dev_err(&dev->dev, "Different MSI driver already installed!\n"); + err = -ENODEV; + goto error_out; + } return 0; error_out: - kfree(msi); + fsl_of_msi_remove(dev); return err; } @@ -351,6 +419,7 @@ static struct of_platform_driver fsl_of_msi_driver = { .of_match_table = fsl_of_msi_ids, }, .probe = fsl_of_msi_probe, + .remove = fsl_of_msi_remove, }; static __init int fsl_of_msi_init(void) diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h index 331c7e7..624580c 100644 --- a/arch/powerpc/sysdev/fsl_msi.h +++ b/arch/powerpc/sysdev/fsl_msi.h @@ -32,8 +32,11 @@ struct fsl_msi { u32 msi_addr_hi; void __iomem *msi_regs; u32 feature; + int msi_virqs[NR_MSI_REG]; struct msi_bitmap bitmap; + + struct list_head list; /* support multiple MSI banks */ }; #endif /* _POWERPC_SYSDEV_FSL_MSI_H */ diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index cd37e49..30e1626 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1426,7 +1426,7 @@ int fsl_rio_setup(struct of_device *dev) port->iores.flags = IORESOURCE_MEM; port->iores.name = "rio_io_win"; - priv->pwirq = irq_of_parse_and_map(dev->node, 0); + priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0); priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2); priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3); priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4); diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 106d767..156aa7d 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -974,6 +974,123 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = .setup_utl = ppc460ex_pciex_init_utl, }; +static int __init ppc460sx_pciex_core_init(struct device_node *np) +{ + /* HSS drive amplitude */ + mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211); + + mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211); + mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211); + mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211); + mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211); + + mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211); + mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211); + mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211); + mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211); + + /* HSS TX pre-emphasis */ + mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987); + + mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987); + + mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987); + + /* HSS TX calibration control */ + mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222); + mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000); + mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000); + + /* HSS TX slew control */ + mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF); + mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000); + mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000); + + udelay(100); + + /* De-assert PLLRESET */ + dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0); + + /* Reset DL, UTL, GPL before configuration */ + mtdcri(SDR0, PESDR0_460SX_RCSSET, + PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU); + mtdcri(SDR0, PESDR1_460SX_RCSSET, + PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU); + mtdcri(SDR0, PESDR2_460SX_RCSSET, + PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU); + + udelay(100); + + /* + * If bifurcation is not enabled, u-boot would have disabled the + * third PCIe port + */ + if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) == + 0x00000001)) { + printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n"); + printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n"); + return 3; + } + + printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n"); + return 2; +} + +static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + + if (port->endpoint) + dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2, + 0x01000000, 0); + else + dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2, + 0, 0x01000000); + + /*Gen-1*/ + mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000); + + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL), + PESDRx_RCSSET_RSTPYN); + + port->has_ibpre = 1; + + return 0; +} + +static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + /* Max 128 Bytes */ + out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000); + return 0; +} + +static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { + .core_init = ppc460sx_pciex_core_init, + .port_init_hw = ppc460sx_pciex_init_port_hw, + .setup_utl = ppc460sx_pciex_init_utl, +}; + #endif /* CONFIG_44x */ #ifdef CONFIG_40x @@ -1089,6 +1206,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) } if (of_device_is_compatible(np, "ibm,plb-pciex-460ex")) ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops; + if (of_device_is_compatible(np, "ibm,plb-pciex-460sx")) + ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops; #endif /* CONFIG_44x */ #ifdef CONFIG_40x if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index d04e40b..56d9e5d 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -324,6 +324,64 @@ #define PESDR0_460EX_IHS2 0x036D /* + * 460SX addtional DCRs + */ +#define PESDRn_460SX_RCEI 0x02 + +#define PESDR0_460SX_HSSL0DAMP 0x320 +#define PESDR0_460SX_HSSL1DAMP 0x321 +#define PESDR0_460SX_HSSL2DAMP 0x322 +#define PESDR0_460SX_HSSL3DAMP 0x323 +#define PESDR0_460SX_HSSL4DAMP 0x324 +#define PESDR0_460SX_HSSL5DAMP 0x325 +#define PESDR0_460SX_HSSL6DAMP 0x326 +#define PESDR0_460SX_HSSL7DAMP 0x327 + +#define PESDR1_460SX_HSSL0DAMP 0x354 +#define PESDR1_460SX_HSSL1DAMP 0x355 +#define PESDR1_460SX_HSSL2DAMP 0x356 +#define PESDR1_460SX_HSSL3DAMP 0x357 + +#define PESDR2_460SX_HSSL0DAMP 0x384 +#define PESDR2_460SX_HSSL1DAMP 0x385 +#define PESDR2_460SX_HSSL2DAMP 0x386 +#define PESDR2_460SX_HSSL3DAMP 0x387 + +#define PESDR0_460SX_HSSL0COEFA 0x328 +#define PESDR0_460SX_HSSL1COEFA 0x329 +#define PESDR0_460SX_HSSL2COEFA 0x32A +#define PESDR0_460SX_HSSL3COEFA 0x32B +#define PESDR0_460SX_HSSL4COEFA 0x32C +#define PESDR0_460SX_HSSL5COEFA 0x32D +#define PESDR0_460SX_HSSL6COEFA 0x32E +#define PESDR0_460SX_HSSL7COEFA 0x32F + +#define PESDR1_460SX_HSSL0COEFA 0x358 +#define PESDR1_460SX_HSSL1COEFA 0x359 +#define PESDR1_460SX_HSSL2COEFA 0x35A +#define PESDR1_460SX_HSSL3COEFA 0x35B + +#define PESDR2_460SX_HSSL0COEFA 0x388 +#define PESDR2_460SX_HSSL1COEFA 0x389 +#define PESDR2_460SX_HSSL2COEFA 0x38A +#define PESDR2_460SX_HSSL3COEFA 0x38B + +#define PESDR0_460SX_HSSL1CALDRV 0x339 +#define PESDR1_460SX_HSSL1CALDRV 0x361 +#define PESDR2_460SX_HSSL1CALDRV 0x391 + +#define PESDR0_460SX_HSSSLEW 0x338 +#define PESDR1_460SX_HSSSLEW 0x360 +#define PESDR2_460SX_HSSSLEW 0x390 + +#define PESDR0_460SX_HSSCTLSET 0x31E +#define PESDR1_460SX_HSSCTLSET 0x352 +#define PESDR2_460SX_HSSCTLSET 0x382 + +#define PESDR0_460SX_RCSSET 0x304 +#define PESDR1_460SX_RCSSET 0x344 +#define PESDR2_460SX_RCSSET 0x374 +/* * Of the above, some are common offsets from the base */ #define PESDRn_UTLSET1 0x00 |
