diff options
Diffstat (limited to 'arch/powerpc/platforms')
56 files changed, 2425 insertions, 1815 deletions
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index fc9c1cb..5aa3f4b 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -1,9 +1,9 @@ config PPC_MPC512x bool "512x-based boards" depends on 6xx + select COMMON_CLK select FSL_SOC select IPIC - select PPC_CLOCK select PPC_PCI_CHOICE select FSL_PCI if PCI select ARCH_WANT_OPTIONAL_GPIOLIB diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile index 72fb934..0169312 100644 --- a/arch/powerpc/platforms/512x/Makefile +++ b/arch/powerpc/platforms/512x/Makefile @@ -1,7 +1,8 @@ # # Makefile for the Freescale PowerPC 512x linux kernel. # -obj-y += clock.o mpc512x_shared.o +obj-$(CONFIG_COMMON_CLK) += clock-commonclk.o +obj-y += mpc512x_shared.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC512x_GENERIC) += mpc512x_generic.o obj-$(CONFIG_PDM360NG) += pdm360ng.o diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c new file mode 100644 index 0000000..6eb614a --- /dev/null +++ b/arch/powerpc/platforms/512x/clock-commonclk.c @@ -0,0 +1,1221 @@ +/* + * Copyright (C) 2013 DENX Software Engineering + * + * Gerhard Sittig, <gsi@denx.de> + * + * common clock driver support for the MPC512x platform + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/bitops.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/mpc5121.h> +#include <dt-bindings/clock/mpc512x-clock.h> + +#include "mpc512x.h" /* our public mpc5121_clk_init() API */ + +/* helpers to keep the MCLK intermediates "somewhere" in our table */ +enum { + MCLK_IDX_MUX0, + MCLK_IDX_EN0, + MCLK_IDX_DIV0, + MCLK_MAX_IDX, +}; + +#define NR_PSCS 12 +#define NR_MSCANS 4 +#define NR_SPDIFS 1 +#define NR_OUTCLK 4 +#define NR_MCLKS (NR_PSCS + NR_MSCANS + NR_SPDIFS + NR_OUTCLK) + +/* extend the public set of clocks by adding internal slots for management */ +enum { + /* arrange for adjacent numbers after the public set */ + MPC512x_CLK_START_PRIVATE = MPC512x_CLK_LAST_PUBLIC, + /* clocks which aren't announced to the public */ + MPC512x_CLK_DDR, + MPC512x_CLK_MEM, + MPC512x_CLK_IIM, + /* intermediates in div+gate combos or fractional dividers */ + MPC512x_CLK_DDR_UG, + MPC512x_CLK_SDHC_x4, + MPC512x_CLK_SDHC_UG, + MPC512x_CLK_SDHC2_UG, + MPC512x_CLK_DIU_x4, + MPC512x_CLK_DIU_UG, + MPC512x_CLK_MBX_BUS_UG, + MPC512x_CLK_MBX_UG, + MPC512x_CLK_MBX_3D_UG, + MPC512x_CLK_PCI_UG, + MPC512x_CLK_NFC_UG, + MPC512x_CLK_LPC_UG, + MPC512x_CLK_SPDIF_TX_IN, + /* intermediates for the mux+gate+div+mux MCLK generation */ + MPC512x_CLK_MCLKS_FIRST, + MPC512x_CLK_MCLKS_LAST = MPC512x_CLK_MCLKS_FIRST + + NR_MCLKS * MCLK_MAX_IDX, + /* internal, symbolic spec for the number of slots */ + MPC512x_CLK_LAST_PRIVATE, +}; + +/* data required for the OF clock provider registration */ +static struct clk *clks[MPC512x_CLK_LAST_PRIVATE]; +static struct clk_onecell_data clk_data; + +/* CCM register access */ +static struct mpc512x_ccm __iomem *clkregs; +static DEFINE_SPINLOCK(clklock); + +/* SoC variants {{{ */ + +/* + * tell SoC variants apart as they are rather similar yet not identical, + * cache the result in an enum to not repeatedly run the expensive OF test + * + * MPC5123 is an MPC5121 without the MBX graphics accelerator + * + * MPC5125 has many more differences: no MBX, no AXE, no VIU, no SPDIF, + * no PATA, no SATA, no PCI, two FECs (of different compatibility name), + * only 10 PSCs (of different compatibility name), two SDHCs, different + * NFC IP block, output clocks, system PLL status query, different CPMF + * interpretation, no CFM, different fourth PSC/CAN mux0 input -- yet + * those differences can get folded into this clock provider support + * code and don't warrant a separate highly redundant implementation + */ + +static enum soc_type { + MPC512x_SOC_MPC5121, + MPC512x_SOC_MPC5123, + MPC512x_SOC_MPC5125, +} soc; + +static void mpc512x_clk_determine_soc(void) +{ + if (of_machine_is_compatible("fsl,mpc5121")) { + soc = MPC512x_SOC_MPC5121; + return; + } + if (of_machine_is_compatible("fsl,mpc5123")) { + soc = MPC512x_SOC_MPC5123; + return; + } + if (of_machine_is_compatible("fsl,mpc5125")) { + soc = MPC512x_SOC_MPC5125; + return; + } +} + +static bool soc_has_mbx(void) +{ + if (soc == MPC512x_SOC_MPC5121) + return true; + return false; +} + +static bool soc_has_axe(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_viu(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_spdif(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_pata(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_sata(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_pci(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return false; + return true; +} + +static bool soc_has_fec2(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static int soc_max_pscnum(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return 10; + return 12; +} + +static bool soc_has_sdhc2(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_nfc_5125(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_outclk(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_cpmf_0_bypass(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +static bool soc_has_mclk_mux0_canin(void) +{ + if (soc == MPC512x_SOC_MPC5125) + return true; + return false; +} + +/* }}} SoC variants */ +/* common clk API wrappers {{{ */ + +/* convenience wrappers around the common clk API */ +static inline struct clk *mpc512x_clk_fixed(const char *name, int rate) +{ + return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); +} + +static inline struct clk *mpc512x_clk_factor( + const char *name, const char *parent_name, + int mul, int div) +{ + int clkflags; + + clkflags = CLK_SET_RATE_PARENT; + return clk_register_fixed_factor(NULL, name, parent_name, clkflags, + mul, div); +} + +static inline struct clk *mpc512x_clk_divider( + const char *name, const char *parent_name, u8 clkflags, + u32 __iomem *reg, u8 pos, u8 len, int divflags) +{ + return clk_register_divider(NULL, name, parent_name, clkflags, + reg, pos, len, divflags, &clklock); +} + +static inline struct clk *mpc512x_clk_divtable( + const char *name, const char *parent_name, + u32 __iomem *reg, u8 pos, u8 len, + const struct clk_div_table *divtab) +{ + u8 divflags; + + divflags = 0; + return clk_register_divider_table(NULL, name, parent_name, 0, + reg, pos, len, divflags, + divtab, &clklock); +} + +static inline struct clk *mpc512x_clk_gated( + const char *name, const char *parent_name, + u32 __iomem *reg, u8 pos) +{ + int clkflags; + + clkflags = CLK_SET_RATE_PARENT; + return clk_register_gate(NULL, name, parent_name, clkflags, + reg, pos, 0, &clklock); +} + +static inline struct clk *mpc512x_clk_muxed(const char *name, + const char **parent_names, int parent_count, + u32 __iomem *reg, u8 pos, u8 len) +{ + int clkflags; + u8 muxflags; + + clkflags = CLK_SET_RATE_PARENT; + muxflags = 0; + return clk_register_mux(NULL, name, + parent_names, parent_count, clkflags, + reg, pos, len, muxflags, &clklock); +} + +/* }}} common clk API wrappers */ + +/* helper to isolate a bit field from a register */ +static inline int get_bit_field(uint32_t __iomem *reg, uint8_t pos, uint8_t len) +{ + uint32_t val; + + val = in_be32(reg); + val >>= pos; + val &= (1 << len) - 1; + return val; +} + +/* get the SPMF and translate it into the "sys pll" multiplier */ +static int get_spmf_mult(void) +{ + static int spmf_to_mult[] = { + 68, 1, 12, 16, 20, 24, 28, 32, + 36, 40, 44, 48, 52, 56, 60, 64, + }; + int spmf; + + spmf = get_bit_field(&clkregs->spmr, 24, 4); + return spmf_to_mult[spmf]; +} + +/* + * get the SYS_DIV value and translate it into a divide factor + * + * values returned from here are a multiple of the real factor since the + * divide ratio is fractional + */ +static int get_sys_div_x2(void) +{ + static int sysdiv_code_to_x2[] = { + 4, 5, 6, 7, 8, 9, 10, 14, + 12, 16, 18, 22, 20, 24, 26, 30, + 28, 32, 34, 38, 36, 40, 42, 46, + 44, 48, 50, 54, 52, 56, 58, 62, + 60, 64, 66, + }; + int divcode; + + divcode = get_bit_field(&clkregs->scfr2, 26, 6); + return sysdiv_code_to_x2[divcode]; +} + +/* + * get the CPMF value and translate it into a multiplier factor + * + * values returned from here are a multiple of the real factor since the + * multiplier ratio is fractional + */ +static int get_cpmf_mult_x2(void) +{ + static int cpmf_to_mult_x36[] = { + /* 0b000 is "times 36" */ + 72, 2, 2, 3, 4, 5, 6, 7, + }; + static int cpmf_to_mult_0by[] = { + /* 0b000 is "bypass" */ + 2, 2, 2, 3, 4, 5, 6, 7, + }; + + int *cpmf_to_mult; + int cpmf; + + cpmf = get_bit_field(&clkregs->spmr, 16, 4); + if (soc_has_cpmf_0_bypass()) + cpmf_to_mult = cpmf_to_mult_0by; + else + cpmf_to_mult = cpmf_to_mult_x36; + return cpmf_to_mult[cpmf]; +} + +/* + * some of the clock dividers do scale in a linear way, yet not all of + * their bit combinations are legal; use a divider table to get a + * resulting set of applicable divider values + */ + +/* applies to the IPS_DIV, and PCI_DIV values */ +static struct clk_div_table divtab_2346[] = { + { .val = 2, .div = 2, }, + { .val = 3, .div = 3, }, + { .val = 4, .div = 4, }, + { .val = 6, .div = 6, }, + { .div = 0, }, +}; + +/* applies to the MBX_DIV, LPC_DIV, and NFC_DIV values */ +static struct clk_div_table divtab_1234[] = { + { .val = 1, .div = 1, }, + { .val = 2, .div = 2, }, + { .val = 3, .div = 3, }, + { .val = 4, .div = 4, }, + { .div = 0, }, +}; + +static int get_freq_from_dt(char *propname) +{ + struct device_node *np; + const unsigned int *prop; + int val; + + val = 0; + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr"); + if (np) { + prop = of_get_property(np, propname, NULL); + if (prop) + val = *prop; + of_node_put(np); + } + return val; +} + +static void mpc512x_clk_preset_data(void) +{ + size_t i; + + for (i = 0; i < ARRAY_SIZE(clks); i++) + clks[i] = ERR_PTR(-ENODEV); +} + +/* + * - receives the "bus frequency" from the caller (that's the IPS clock + * rate, the historical source of clock information) + * - fetches the system PLL multiplier and divider values as well as the + * IPS divider value from hardware + * - determines the REF clock rate either from the XTAL/OSC spec (if + * there is a device tree node describing the oscillator) or from the + * IPS bus clock (supported for backwards compatibility, such that + * setups without XTAL/OSC specs keep working) + * - creates the "ref" clock item in the clock tree, such that + * subsequent code can create the remainder of the hierarchy (REF -> + * SYS -> CSB -> IPS) from the REF clock rate and the returned mul/div + * values + */ +static void mpc512x_clk_setup_ref_clock(struct device_node *np, int bus_freq, + int *sys_mul, int *sys_div, + int *ips_div) +{ + struct clk *osc_clk; + int calc_freq; + + /* fetch mul/div factors from the hardware */ + *sys_mul = get_spmf_mult(); + *sys_mul *= 2; /* compensate for the fractional divider */ + *sys_div = get_sys_div_x2(); + *ips_div = get_bit_field(&clkregs->scfr1, 23, 3); + + /* lookup the oscillator clock for its rate */ + osc_clk = of_clk_get_by_name(np, "osc"); + + /* + * either descend from OSC to REF (and in bypassing verify the + * IPS rate), or backtrack from IPS and multiplier values that + * were fetched from hardware to REF and thus to the OSC value + * + * in either case the REF clock gets created here and the + * remainder of the clock tree can get spanned from there + */ + if (!IS_ERR(osc_clk)) { + clks[MPC512x_CLK_REF] = mpc512x_clk_factor("ref", "osc", 1, 1); + calc_freq = clk_get_rate(clks[MPC512x_CLK_REF]); + calc_freq *= *sys_mul; + calc_freq /= *sys_div; + calc_freq /= 2; + calc_freq /= *ips_div; + if (bus_freq && calc_freq != bus_freq) + pr_warn("calc rate %d != OF spec %d\n", + calc_freq, bus_freq); + } else { + calc_freq = bus_freq; /* start with IPS */ + calc_freq *= *ips_div; /* IPS -> CSB */ + calc_freq *= 2; /* CSB -> SYS */ + calc_freq *= *sys_div; /* SYS -> PLL out */ + calc_freq /= *sys_mul; /* PLL out -> REF == OSC */ + clks[MPC512x_CLK_REF] = mpc512x_clk_fixed("ref", calc_freq); + } +} + +/* MCLK helpers {{{ */ + +/* + * helper code for the MCLK subtree setup + * + * the overview in section 5.2.4 of the MPC5121e Reference Manual rev4 + * suggests that all instances of the "PSC clock generation" are equal, + * and that one might re-use the PSC setup for MSCAN clock generation + * (section 5.2.5) as well, at least the logic if not the data for + * description + * + * the details (starting at page 5-20) show differences in the specific + * inputs of the first mux stage ("can clk in", "spdif tx"), and the + * factual non-availability of the second mux stage (it's present yet + * only one input is valid) + * + * the MSCAN clock related registers (starting at page 5-35) all + * reference "spdif clk" at the first mux stage and don't mention any + * "can clk" at all, which somehow is unexpected + * + * TODO re-check the document, and clarify whether the RM is correct in + * the overview or in the details, and whether the difference is a + * clipboard induced error or results from chip revisions + * + * it turns out that the RM rev4 as of 2012-06 talks about "can" for the + * PSCs while RM rev3 as of 2008-10 talks about "spdif", so I guess that + * first a doc update is required which better reflects reality in the + * SoC before the implementation should follow while no questions remain + */ + +/* + * note that this declaration raises a checkpatch warning, but + * it's the very data type dictated by <linux/clk-provider.h>, + * "fixing" this warning will break compilation + */ +static const char *parent_names_mux0_spdif[] = { + "sys", "ref", "psc-mclk-in", "spdif-tx", +}; + +static const char *parent_names_mux0_canin[] = { + "sys", "ref", "psc-mclk-in", "can-clk-in", +}; + +enum mclk_type { + MCLK_TYPE_PSC, + MCLK_TYPE_MSCAN, + MCLK_TYPE_SPDIF, + MCLK_TYPE_OUTCLK, +}; + +struct mclk_setup_data { + enum mclk_type type; + bool has_mclk1; + const char *name_mux0; + const char *name_en0; + const char *name_div0; + const char *parent_names_mux1[2]; + const char *name_mclk; +}; + +#define MCLK_SETUP_DATA_PSC(id) { \ + MCLK_TYPE_PSC, 0, \ + "psc" #id "-mux0", \ + "psc" #id "-en0", \ + "psc" #id "_mclk_div", \ + { "psc" #id "_mclk_div", "dummy", }, \ + "psc" #id "_mclk", \ +} + +#define MCLK_SETUP_DATA_MSCAN(id) { \ + MCLK_TYPE_MSCAN, 0, \ + "mscan" #id "-mux0", \ + "mscan" #id "-en0", \ + "mscan" #id "_mclk_div", \ + { "mscan" #id "_mclk_div", "dummy", }, \ + "mscan" #id "_mclk", \ +} + +#define MCLK_SETUP_DATA_SPDIF { \ + MCLK_TYPE_SPDIF, 1, \ + "spdif-mux0", \ + "spdif-en0", \ + "spdif_mclk_div", \ + { "spdif_mclk_div", "spdif-rx", }, \ + "spdif_mclk", \ +} + +#define MCLK_SETUP_DATA_OUTCLK(id) { \ + MCLK_TYPE_OUTCLK, 0, \ + "out" #id "-mux0", \ + "out" #id "-en0", \ + "out" #id "_mclk_div", \ + { "out" #id "_mclk_div", "dummy", }, \ + "out" #id "_clk", \ +} + +static struct mclk_setup_data mclk_psc_data[] = { + MCLK_SETUP_DATA_PSC(0), + MCLK_SETUP_DATA_PSC(1), + MCLK_SETUP_DATA_PSC(2), + MCLK_SETUP_DATA_PSC(3), + MCLK_SETUP_DATA_PSC(4), + MCLK_SETUP_DATA_PSC(5), + MCLK_SETUP_DATA_PSC(6), + MCLK_SETUP_DATA_PSC(7), + MCLK_SETUP_DATA_PSC(8), + MCLK_SETUP_DATA_PSC(9), + MCLK_SETUP_DATA_PSC(10), + MCLK_SETUP_DATA_PSC(11), +}; + +static struct mclk_setup_data mclk_mscan_data[] = { + MCLK_SETUP_DATA_MSCAN(0), + MCLK_SETUP_DATA_MSCAN(1), + MCLK_SETUP_DATA_MSCAN(2), + MCLK_SETUP_DATA_MSCAN(3), +}; + +static struct mclk_setup_data mclk_spdif_data[] = { + MCLK_SETUP_DATA_SPDIF, +}; + +static struct mclk_setup_data mclk_outclk_data[] = { + MCLK_SETUP_DATA_OUTCLK(0), + MCLK_SETUP_DATA_OUTCLK(1), + MCLK_SETUP_DATA_OUTCLK(2), + MCLK_SETUP_DATA_OUTCLK(3), +}; + +/* setup the MCLK clock subtree of an individual PSC/MSCAN/SPDIF */ +static void mpc512x_clk_setup_mclk(struct mclk_setup_data *entry, size_t idx) +{ + size_t clks_idx_pub, clks_idx_int; + u32 __iomem *mccr_reg; /* MCLK control register (mux, en, div) */ + int div; + + /* derive a few parameters from the component type and index */ + switch (entry->type) { + case MCLK_TYPE_PSC: + clks_idx_pub = MPC512x_CLK_PSC0_MCLK + idx; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (idx) * MCLK_MAX_IDX; + mccr_reg = &clkregs->psc_ccr[idx]; + break; + case MCLK_TYPE_MSCAN: + clks_idx_pub = MPC512x_CLK_MSCAN0_MCLK + idx; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (NR_PSCS + idx) * MCLK_MAX_IDX; + mccr_reg = &clkregs->mscan_ccr[idx]; + break; + case MCLK_TYPE_SPDIF: + clks_idx_pub = MPC512x_CLK_SPDIF_MCLK; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (NR_PSCS + NR_MSCANS) * MCLK_MAX_IDX; + mccr_reg = &clkregs->spccr; + break; + case MCLK_TYPE_OUTCLK: + clks_idx_pub = MPC512x_CLK_OUT0_CLK + idx; + clks_idx_int = MPC512x_CLK_MCLKS_FIRST + + (NR_PSCS + NR_MSCANS + NR_SPDIFS + idx) + * MCLK_MAX_IDX; + mccr_reg = &clkregs->out_ccr[idx]; + break; + default: + return; + } + + /* + * this was grabbed from the PPC_CLOCK implementation, which + * enforced a specific MCLK divider while the clock was gated + * during setup (that's a documented hardware requirement) + * + * the PPC_CLOCK implementation might even have violated the + * "MCLK <= IPS" constraint, the fixed divider value of 1 + * results in a divider of 2 and thus MCLK = SYS/2 which equals + * CSB which is greater than IPS; the serial port setup may have + * adjusted the divider which the clock setup might have left in + * an undesirable state + * + * initial setup is: + * - MCLK 0 from SYS + * - MCLK DIV such to not exceed the IPS clock + * - MCLK 0 enabled + * - MCLK 1 from MCLK DIV + */ + div = clk_get_rate(clks[MPC512x_CLK_SYS]); + div /= clk_get_rate(clks[MPC512x_CLK_IPS]); + out_be32(mccr_reg, (0 << 16)); + out_be32(mccr_reg, (0 << 16) | ((div - 1) << 17)); + out_be32(mccr_reg, (1 << 16) | ((div - 1) << 17)); + + /* + * create the 'struct clk' items of the MCLK's clock subtree + * + * note that by design we always create all nodes and won't take + * shortcuts here, because + * - the "internal" MCLK_DIV and MCLK_OUT signal in turn are + * selectable inputs to the CFM while those who "actually use" + * the PSC/MSCAN/SPDIF (serial drivers et al) need the MCLK + * for their bitrate + * - in the absence of "aliases" for clocks we need to create + * individial 'struct clk' items for whatever might get + * referenced or looked up, even if several of those items are + * identical from the logical POV (their rate value) + * - for easier future maintenance and for better reflection of + * the SoC's documentation, it appears appropriate to generate + * clock items even for those muxers which actually are NOPs + * (those with two inputs of which one is reserved) + */ + clks[clks_idx_int + MCLK_IDX_MUX0] = mpc512x_clk_muxed( + entry->name_mux0, + soc_has_mclk_mux0_canin() + ? &parent_names_mux0_canin[0] + : &parent_names_mux0_spdif[0], + ARRAY_SIZE(parent_names_mux0_spdif), + mccr_reg, 14, 2); + clks[clks_idx_int + MCLK_IDX_EN0] = mpc512x_clk_gated( + entry->name_en0, entry->name_mux0, + mccr_reg, 16); + clks[clks_idx_int + MCLK_IDX_DIV0] = mpc512x_clk_divider( + entry->name_div0, + entry->name_en0, CLK_SET_RATE_GATE, + mccr_reg, 17, 15, 0); + if (entry->has_mclk1) { + clks[clks_idx_pub] = mpc512x_clk_muxed( + entry->name_mclk, + &entry->parent_names_mux1[0], + ARRAY_SIZE(entry->parent_names_mux1), + mccr_reg, 7, 1); + } else { + clks[clks_idx_pub] = mpc512x_clk_factor( + entry->name_mclk, + entry->parent_names_mux1[0], + 1, 1); + } +} + +/* }}} MCLK helpers */ + +static void mpc512x_clk_setup_clock_tree(struct device_node *np, int busfreq) +{ + int sys_mul, sys_div, ips_div; + int mul, div; + size_t mclk_idx; + int freq; + + /* + * developer's notes: + * - consider whether to handle clocks which have both gates and + * dividers via intermediates or by means of composites + * - fractional dividers appear to not map well to composites + * since they can be seen as a fixed multiplier and an + * adjustable divider, while composites can only combine at + * most one of a mux, div, and gate each into one 'struct clk' + * item + * - PSC/MSCAN/SPDIF clock generation OTOH already is very + * specific and cannot get mapped to componsites (at least not + * a single one, maybe two of them, but then some of these + * intermediate clock signals get referenced elsewhere (e.g. + * in the clock frequency measurement, CFM) and thus need + * publicly available names + * - the current source layout appropriately reflects the + * hardware setup, and it works, so it's questionable whether + * further changes will result in big enough a benefit + */ + + /* regardless of whether XTAL/OSC exists, have REF created */ + mpc512x_clk_setup_ref_clock(np, busfreq, &sys_mul, &sys_div, &ips_div); + + /* now setup the REF -> SYS -> CSB -> IPS hierarchy */ + clks[MPC512x_CLK_SYS] = mpc512x_clk_factor("sys", "ref", + sys_mul, sys_div); + clks[MPC512x_CLK_CSB] = mpc512x_clk_factor("csb", "sys", 1, 2); + clks[MPC512x_CLK_IPS] = mpc512x_clk_divtable("ips", "csb", + &clkregs->scfr1, 23, 3, + divtab_2346); + /* now setup anything below SYS and CSB and IPS */ + + clks[MPC512x_CLK_DDR_UG] = mpc512x_clk_factor("ddr-ug", "sys", 1, 2); + + /* + * the Reference Manual discusses that for SDHC only even divide + * ratios are supported because clock domain synchronization + * between 'per' and 'ipg' is broken; + * keep the divider's bit 0 cleared (per reset value), and only + * allow to setup the divider's bits 7:1, which results in that + * only even divide ratios can get configured upon rate changes; + * keep the "x4" name because this bit shift hack is an internal + * implementation detail, the "fractional divider with quarters" + * semantics remains + */ + clks[MPC512x_CLK_SDHC_x4] = mpc512x_clk_factor("sdhc-x4", "csb", 2, 1); + clks[MPC512x_CLK_SDHC_UG] = mpc512x_clk_divider("sdhc-ug", "sdhc-x4", 0, + &clkregs->scfr2, 1, 7, + CLK_DIVIDER_ONE_BASED); + if (soc_has_sdhc2()) { + clks[MPC512x_CLK_SDHC2_UG] = mpc512x_clk_divider( + "sdhc2-ug", "sdhc-x4", 0, &clkregs->scfr2, + 9, 7, CLK_DIVIDER_ONE_BASED); + } + + clks[MPC512x_CLK_DIU_x4] = mpc512x_clk_factor("diu-x4", "csb", 4, 1); + clks[MPC512x_CLK_DIU_UG] = mpc512x_clk_divider("diu-ug", "diu-x4", 0, + &clkregs->scfr1, 0, 8, + CLK_DIVIDER_ONE_BASED); + + /* + * the "power architecture PLL" was setup from data which was + * sampled from the reset config word, at this point in time the + * configuration can be considered fixed and read only (i.e. no + * longer adjustable, or no longer in need of adjustment), which + * is why we don't register a PLL here but assume fixed factors + */ + mul = get_cpmf_mult_x2(); + div = 2; /* compensate for the fractional factor */ + clks[MPC512x_CLK_E300] = mpc512x_clk_factor("e300", "csb", mul, div); + + if (soc_has_mbx()) { + clks[MPC512x_CLK_MBX_BUS_UG] = mpc512x_clk_factor( + "mbx-bus-ug", "csb", 1, 2); + clks[MPC512x_CLK_MBX_UG] = mpc512x_clk_divtable( + "mbx-ug", "mbx-bus-ug", &clkregs->scfr1, + 14, 3, divtab_1234); + clks[MPC512x_CLK_MBX_3D_UG] = mpc512x_clk_factor( + "mbx-3d-ug", "mbx-ug", 1, 1); + } + if (soc_has_pci()) { + clks[MPC512x_CLK_PCI_UG] = mpc512x_clk_divtable( + "pci-ug", "csb", &clkregs->scfr1, + 20, 3, divtab_2346); + } + if (soc_has_nfc_5125()) { + /* + * XXX TODO implement 5125 NFC clock setup logic, + * with high/low period counters in clkregs->scfr3, + * currently there are no users so it's ENOIMPL + */ + clks[MPC512x_CLK_NFC_UG] = ERR_PTR(-ENOTSUPP); + } else { + clks[MPC512x_CLK_NFC_UG] = mpc512x_clk_divtable( + "nfc-ug", "ips", &clkregs->scfr1, + 8, 3, divtab_1234); + } + clks[MPC512x_CLK_LPC_UG] = mpc512x_clk_divtable("lpc-ug", "ips", + &clkregs->scfr1, 11, 3, + divtab_1234); + + clks[MPC512x_CLK_LPC] = mpc512x_clk_gated("lpc", "lpc-ug", + &clkregs->sccr1, 30); + clks[MPC512x_CLK_NFC] = mpc512x_clk_gated("nfc", "nfc-ug", + &clkregs->sccr1, 29); + if (soc_has_pata()) { + clks[MPC512x_CLK_PATA] = mpc512x_clk_gated( + "pata", "ips", &clkregs->sccr1, 28); + } + /* for PSCs there is a "registers" gate and a bitrate MCLK subtree */ + for (mclk_idx = 0; mclk_idx < soc_max_pscnum(); mclk_idx++) { + char name[12]; + snprintf(name, sizeof(name), "psc%d", mclk_idx); + clks[MPC512x_CLK_PSC0 + mclk_idx] = mpc512x_clk_gated( + name, "ips", &clkregs->sccr1, 27 - mclk_idx); + mpc512x_clk_setup_mclk(&mclk_psc_data[mclk_idx], mclk_idx); + } + clks[MPC512x_CLK_PSC_FIFO] = mpc512x_clk_gated("psc-fifo", "ips", + &clkregs->sccr1, 15); + if (soc_has_sata()) { + clks[MPC512x_CLK_SATA] = mpc512x_clk_gated( + "sata", "ips", &clkregs->sccr1, 14); + } + clks[MPC512x_CLK_FEC] = mpc512x_clk_gated("fec", "ips", + &clkregs->sccr1, 13); + if (soc_has_pci()) { + clks[MPC512x_CLK_PCI] = mpc512x_clk_gated( + "pci", "pci-ug", &clkregs->sccr1, 11); + } + clks[MPC512x_CLK_DDR] = mpc512x_clk_gated("ddr", "ddr-ug", + &clkregs->sccr1, 10); + if (soc_has_fec2()) { + clks[MPC512x_CLK_FEC2] = mpc512x_clk_gated( + "fec2", "ips", &clkregs->sccr1, 9); + } + + clks[MPC512x_CLK_DIU] = mpc512x_clk_gated("diu", "diu-ug", + &clkregs->sccr2, 31); + if (soc_has_axe()) { + clks[MPC512x_CLK_AXE] = mpc512x_clk_gated( + "axe", "csb", &clkregs->sccr2, 30); + } + clks[MPC512x_CLK_MEM] = mpc512x_clk_gated("mem", "ips", + &clkregs->sccr2, 29); + clks[MPC512x_CLK_USB1] = mpc512x_clk_gated("usb1", "csb", + &clkregs->sccr2, 28); + clks[MPC512x_CLK_USB2] = mpc512x_clk_gated("usb2", "csb", + &clkregs->sccr2, 27); + clks[MPC512x_CLK_I2C] = mpc512x_clk_gated("i2c", "ips", + &clkregs->sccr2, 26); + /* MSCAN differs from PSC with just one gate for multiple components */ + clks[MPC512x_CLK_BDLC] = mpc512x_clk_gated("bdlc", "ips", + &clkregs->sccr2, 25); + for (mclk_idx = 0; mclk_idx < ARRAY_SIZE(mclk_mscan_data); mclk_idx++) + mpc512x_clk_setup_mclk(&mclk_mscan_data[mclk_idx], mclk_idx); + clks[MPC512x_CLK_SDHC] = mpc512x_clk_gated("sdhc", "sdhc-ug", + &clkregs->sccr2, 24); + /* there is only one SPDIF component, which shares MCLK support code */ + if (soc_has_spdif()) { + clks[MPC512x_CLK_SPDIF] = mpc512x_clk_gated( + "spdif", "ips", &clkregs->sccr2, 23); + mpc512x_clk_setup_mclk(&mclk_spdif_data[0], 0); + } + if (soc_has_mbx()) { + clks[MPC512x_CLK_MBX_BUS] = mpc512x_clk_gated( + "mbx-bus", "mbx-bus-ug", &clkregs->sccr2, 22); + clks[MPC512x_CLK_MBX] = mpc512x_clk_gated( + "mbx", "mbx-ug", &clkregs->sccr2, 21); + clks[MPC512x_CLK_MBX_3D] = mpc512x_clk_gated( + "mbx-3d", "mbx-3d-ug", &clkregs->sccr2, 20); + } + clks[MPC512x_CLK_IIM] = mpc512x_clk_gated("iim", "csb", + &clkregs->sccr2, 19); + if (soc_has_viu()) { + clks[MPC512x_CLK_VIU] = mpc512x_clk_gated( + "viu", "csb", &clkregs->sccr2, 18); + } + if (soc_has_sdhc2()) { + clks[MPC512x_CLK_SDHC2] = mpc512x_clk_gated( + "sdhc-2", "sdhc2-ug", &clkregs->sccr2, 17); + } + + if (soc_has_outclk()) { + size_t idx; /* used as mclk_idx, just to trim line length */ + for (idx = 0; idx < ARRAY_SIZE(mclk_outclk_data); idx++) + mpc512x_clk_setup_mclk(&mclk_outclk_data[idx], idx); + } + + /* + * externally provided clocks (when implemented in hardware, + * device tree may specify values which otherwise were unknown) + */ + freq = get_freq_from_dt("psc_mclk_in"); + if (!freq) + freq = 25000000; + clks[MPC512x_CLK_PSC_MCLK_IN] = mpc512x_clk_fixed("psc_mclk_in", freq); + if (soc_has_mclk_mux0_canin()) { + freq = get_freq_from_dt("can_clk_in"); + clks[MPC512x_CLK_CAN_CLK_IN] = mpc512x_clk_fixed( + "can_clk_in", freq); + } else { + freq = get_freq_from_dt("spdif_tx_in"); + clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed( + "spdif_tx_in", freq); + freq = get_freq_from_dt("spdif_rx_in"); + clks[MPC512x_CLK_SPDIF_TX_IN] = mpc512x_clk_fixed( + "spdif_rx_in", freq); + } + + /* fixed frequency for AC97, always 24.567MHz */ + clks[MPC512x_CLK_AC97] = mpc512x_clk_fixed("ac97", 24567000); + + /* + * pre-enable those "internal" clock items which never get + * claimed by any peripheral driver, to not have the clock + * subsystem disable them late at startup + */ + clk_prepare_enable(clks[MPC512x_CLK_DUMMY]); + clk_prepare_enable(clks[MPC512x_CLK_E300]); /* PowerPC CPU */ + clk_prepare_enable(clks[MPC512x_CLK_DDR]); /* DRAM */ + clk_prepare_enable(clks[MPC512x_CLK_MEM]); /* SRAM */ + clk_prepare_enable(clks[MPC512x_CLK_IPS]); /* SoC periph */ + clk_prepare_enable(clks[MPC512x_CLK_LPC]); /* boot media */ +} + +/* + * registers the set of public clocks (those listed in the dt-bindings/ + * header file) for OF lookups, keeps the intermediates private to us + */ +static void mpc5121_clk_register_of_provider(struct device_node *np) +{ + clk_data.clks = clks; + clk_data.clk_num = MPC512x_CLK_LAST_PUBLIC + 1; /* _not_ ARRAY_SIZE() */ + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +/* + * temporary support for the period of time between introduction of CCF + * support and the adjustment of peripheral drivers to OF based lookups + */ +static void mpc5121_clk_provide_migration_support(void) +{ + + /* + * pre-enable those clock items which are not yet appropriately + * acquired by their peripheral driver + * + * the PCI clock cannot get acquired by its peripheral driver, + * because for this platform the driver won't probe(), instead + * initialization is done from within the .setup_arch() routine + * at a point in time where the clock provider has not been + * setup yet and thus isn't available yet + * + * so we "pre-enable" the clock here, to not have the clock + * subsystem automatically disable this item in a late init call + * + * this PCI clock pre-enable workaround only applies when there + * are device tree nodes for PCI and thus the peripheral driver + * has attached to bridges, otherwise the PCI clock remains + * unused and so it gets disabled + */ + clk_prepare_enable(clks[MPC512x_CLK_PSC3_MCLK]);/* serial console */ + if (of_find_compatible_node(NULL, "pci", "fsl,mpc5121-pci")) + clk_prepare_enable(clks[MPC512x_CLK_PCI]); +} + +/* + * those macros are not exactly pretty, but they encapsulate a lot + * of copy'n'paste heavy code which is even more ugly, and reduce + * the potential for inconsistencies in those many code copies + */ +#define FOR_NODES(compatname) \ + for_each_compatible_node(np, NULL, compatname) + +#define NODE_PREP do { \ + of_address_to_resource(np, 0, &res); \ + snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \ +} while (0) + +#define NODE_CHK(clkname, clkitem, regnode, regflag) do { \ + struct clk *clk; \ + clk = of_clk_get_by_name(np, clkname); \ + if (IS_ERR(clk)) { \ + clk = clkitem; \ + clk_register_clkdev(clk, clkname, devname); \ + if (regnode) \ + clk_register_clkdev(clk, clkname, np->name); \ + did_register |= DID_REG_ ## regflag; \ + pr_debug("clock alias name '%s' for dev '%s' pointer %p\n", \ + clkname, devname, clk); \ + } else { \ + clk_put(clk); \ + } \ +} while (0) + +/* + * register source code provided fallback results for clock lookups, + * these get consulted when OF based clock lookup fails (that is in the + * case of not yet adjusted device tree data, where clock related specs + * are missing) + */ +static void mpc5121_clk_provide_backwards_compat(void) +{ + enum did_reg_flags { + DID_REG_PSC = BIT(0), + DID_REG_PSCFIFO = BIT(1), + DID_REG_NFC = BIT(2), + DID_REG_CAN = BIT(3), + DID_REG_I2C = BIT(4), + DID_REG_DIU = BIT(5), + DID_REG_VIU = BIT(6), + DID_REG_FEC = BIT(7), + DID_REG_USB = BIT(8), + DID_REG_PATA = BIT(9), + }; + + int did_register; + struct device_node *np; + struct resource res; + int idx; + char devname[32]; + + did_register = 0; + + FOR_NODES(mpc512x_select_psc_compat()) { + NODE_PREP; + idx = (res.start >> 8) & 0xf; + NODE_CHK("ipg", clks[MPC512x_CLK_PSC0 + idx], 0, PSC); + NODE_CHK("mclk", clks[MPC512x_CLK_PSC0_MCLK + idx], 0, PSC); + } + + FOR_NODES("fsl,mpc5121-psc-fifo") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_PSC_FIFO], 1, PSCFIFO); + } + + FOR_NODES("fsl,mpc5121-nfc") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_NFC], 0, NFC); + } + + FOR_NODES("fsl,mpc5121-mscan") { + NODE_PREP; + idx = 0; + idx += (res.start & 0x2000) ? 2 : 0; + idx += (res.start & 0x0080) ? 1 : 0; + NODE_CHK("ipg", clks[MPC512x_CLK_BDLC], 0, CAN); + NODE_CHK("mclk", clks[MPC512x_CLK_MSCAN0_MCLK + idx], 0, CAN); + } + + /* + * do register the 'ips', 'sys', and 'ref' names globally + * instead of inside each individual CAN node, as there is no + * potential for a name conflict (in contrast to 'ipg' and 'mclk') + */ + if (did_register & DID_REG_CAN) { + clk_register_clkdev(clks[MPC512x_CLK_IPS], "ips", NULL); + clk_register_clkdev(clks[MPC512x_CLK_SYS], "sys", NULL); + clk_register_clkdev(clks[MPC512x_CLK_REF], "ref", NULL); + } + + FOR_NODES("fsl,mpc5121-i2c") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_I2C], 0, I2C); + } + + /* + * workaround for the fact that the I2C driver does an "anonymous" + * lookup (NULL name spec, which yields the first clock spec) for + * which we cannot register an alias -- a _global_ 'ipg' alias that + * is not bound to any device name and returns the I2C clock item + * is not a good idea + * + * so we have the lookup in the peripheral driver fail, which is + * silent and non-fatal, and pre-enable the clock item here such + * that register access is possible + * + * see commit b3bfce2b "i2c: mpc: cleanup clock API use" for + * details, adjusting s/NULL/"ipg"/ in i2c-mpc.c would make this + * workaround obsolete + */ + if (did_register & DID_REG_I2C) + clk_prepare_enable(clks[MPC512x_CLK_I2C]); + + FOR_NODES("fsl,mpc5121-diu") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_DIU], 1, DIU); + } + + FOR_NODES("fsl,mpc5121-viu") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_VIU], 0, VIU); + } + + /* + * note that 2771399a "fs_enet: cleanup clock API use" did use the + * "per" string for the clock lookup in contrast to the "ipg" name + * which most other nodes are using -- this is not a fatal thing + * but just something to keep in mind when doing compatibility + * registration, it's a non-issue with up-to-date device tree data + */ + FOR_NODES("fsl,mpc5121-fec") { + NODE_PREP; + NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC); + } + FOR_NODES("fsl,mpc5121-fec-mdio") { + NODE_PREP; + NODE_CHK("per", clks[MPC512x_CLK_FEC], 0, FEC); + } + /* + * MPC5125 has two FECs: FEC1 at 0x2800, FEC2 at 0x4800; + * the clock items don't "form an array" since FEC2 was + * added only later and was not allowed to shift all other + * clock item indices, so the numbers aren't adjacent + */ + FOR_NODES("fsl,mpc5125-fec") { + NODE_PREP; + if (res.start & 0x4000) + idx = MPC512x_CLK_FEC2; + else + idx = MPC512x_CLK_FEC; + NODE_CHK("per", clks[idx], 0, FEC); + } + + FOR_NODES("fsl,mpc5121-usb2-dr") { + NODE_PREP; + idx = (res.start & 0x4000) ? 1 : 0; + NODE_CHK("ipg", clks[MPC512x_CLK_USB1 + idx], 0, USB); + } + + FOR_NODES("fsl,mpc5121-pata") { + NODE_PREP; + NODE_CHK("ipg", clks[MPC512x_CLK_PATA], 0, PATA); + } + + /* + * try to collapse diagnostics into a single line of output yet + * provide a full list of what is missing, to avoid noise in the + * absence of up-to-date device tree data -- backwards + * compatibility to old DTBs is a requirement, updates may be + * desirable or preferrable but are not at all mandatory + */ + if (did_register) { + pr_notice("device tree lacks clock specs, adding fallbacks (0x%x,%s%s%s%s%s%s%s%s%s%s)\n", + did_register, + (did_register & DID_REG_PSC) ? " PSC" : "", + (did_register & DID_REG_PSCFIFO) ? " PSCFIFO" : "", + (did_register & DID_REG_NFC) ? " NFC" : "", + (did_register & DID_REG_CAN) ? " CAN" : "", + (did_register & DID_REG_I2C) ? " I2C" : "", + (did_register & DID_REG_DIU) ? " DIU" : "", + (did_register & DID_REG_VIU) ? " VIU" : "", + (did_register & DID_REG_FEC) ? " FEC" : "", + (did_register & DID_REG_USB) ? " USB" : "", + (did_register & DID_REG_PATA) ? " PATA" : ""); + } else { + pr_debug("device tree has clock specs, no fallbacks added\n"); + } +} + +int __init mpc5121_clk_init(void) +{ + struct device_node *clk_np; + int busfreq; + + /* map the clock control registers */ + clk_np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + if (!clk_np) + return -ENODEV; + clkregs = of_iomap(clk_np, 0); + WARN_ON(!clkregs); + + /* determine the SoC variant we run on */ + mpc512x_clk_determine_soc(); + + /* invalidate all not yet registered clock slots */ + mpc512x_clk_preset_data(); + + /* + * have the device tree scanned for "fixed-clock" nodes (which + * includes the oscillator node if the board's DT provides one) + */ + of_clk_init(NULL); + + /* + * add a dummy clock for those situations where a clock spec is + * required yet no real clock is involved + */ + clks[MPC512x_CLK_DUMMY] = mpc512x_clk_fixed("dummy", 0); + + /* + * have all the real nodes in the clock tree populated from REF + * down to all leaves, either starting from the OSC node or from + * a REF root that was created from the IPS bus clock input + */ + busfreq = get_freq_from_dt("bus-frequency"); + mpc512x_clk_setup_clock_tree(clk_np, busfreq); + + /* register as an OF clock provider */ + mpc5121_clk_register_of_provider(clk_np); + + /* + * unbreak not yet adjusted peripheral drivers during migration + * towards fully operational common clock support, and allow + * operation in the absence of clock related device tree specs + */ + mpc5121_clk_provide_migration_support(); + mpc5121_clk_provide_backwards_compat(); + + return 0; +} diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c deleted file mode 100644 index fd8a376..0000000 --- a/arch/powerpc/platforms/512x/clock.c +++ /dev/null @@ -1,754 +0,0 @@ -/* - * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved. - * - * Author: John Rigby <jrigby@freescale.com> - * - * Implements the clk api defined in include/linux/clk.h - * - * Original based on linux/arch/arm/mach-integrator/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/io.h> - -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <asm/mpc5xxx.h> -#include <asm/mpc5121.h> -#include <asm/clk_interface.h> - -#include "mpc512x.h" - -#undef CLK_DEBUG - -static int clocks_initialized; - -#define CLK_HAS_RATE 0x1 /* has rate in MHz */ -#define CLK_HAS_CTRL 0x2 /* has control reg and bit */ - -struct clk { - struct list_head node; - char name[32]; - int flags; - struct device *dev; - unsigned long rate; - struct module *owner; - void (*calc) (struct clk *); - struct clk *parent; - int reg, bit; /* CLK_HAS_CTRL */ - int div_shift; /* only used by generic_div_clk_calc */ -}; - -static LIST_HEAD(clocks); -static DEFINE_MUTEX(clocks_mutex); - -static struct clk *mpc5121_clk_get(struct device *dev, const char *id) -{ - struct clk *p, *clk = ERR_PTR(-ENOENT); - int dev_match; - int id_match; - - if (dev == NULL || id == NULL) - return clk; - - mutex_lock(&clocks_mutex); - list_for_each_entry(p, &clocks, node) { - dev_match = id_match = 0; - - if (dev == p->dev) - dev_match++; - if (strcmp(id, p->name) == 0) - id_match++; - if ((dev_match || id_match) && try_module_get(p->owner)) { - clk = p; - break; - } - } - mutex_unlock(&clocks_mutex); - - return clk; -} - -#ifdef CLK_DEBUG -static void dump_clocks(void) -{ - struct clk *p; - - mutex_lock(&clocks_mutex); - printk(KERN_INFO "CLOCKS:\n"); - list_for_each_entry(p, &clocks, node) { - pr_info(" %s=%ld", p->name, p->rate); - if (p->parent) - pr_cont(" %s=%ld", p->parent->name, - p->parent->rate); - if (p->flags & CLK_HAS_CTRL) - pr_cont(" reg/bit=%d/%d", p->reg, p->bit); - pr_cont("\n"); - } - mutex_unlock(&clocks_mutex); -} -#define DEBUG_CLK_DUMP() dump_clocks() -#else -#define DEBUG_CLK_DUMP() -#endif - - -static void mpc5121_clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - -#define NRPSC 12 - -struct mpc512x_clockctl { - u32 spmr; /* System PLL Mode Reg */ - u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */ - u32 scfr1; /* System Clk Freq Reg 1 */ - u32 scfr2; /* System Clk Freq Reg 2 */ - u32 reserved; - u32 bcr; /* Bread Crumb Reg */ - u32 pccr[NRPSC]; /* PSC Clk Ctrl Reg 0-11 */ - u32 spccr; /* SPDIF Clk Ctrl Reg */ - u32 cccr; /* CFM Clk Ctrl Reg */ - u32 dccr; /* DIU Clk Cnfg Reg */ -}; - -static struct mpc512x_clockctl __iomem *clockctl; - -static int mpc5121_clk_enable(struct clk *clk) -{ - unsigned int mask; - - if (clk->flags & CLK_HAS_CTRL) { - mask = in_be32(&clockctl->sccr[clk->reg]); - mask |= 1 << clk->bit; - out_be32(&clockctl->sccr[clk->reg], mask); - } - return 0; -} - -static void mpc5121_clk_disable(struct clk *clk) -{ - unsigned int mask; - - if (clk->flags & CLK_HAS_CTRL) { - mask = in_be32(&clockctl->sccr[clk->reg]); - mask &= ~(1 << clk->bit); - out_be32(&clockctl->sccr[clk->reg], mask); - } -} - -static unsigned long mpc5121_clk_get_rate(struct clk *clk) -{ - if (clk->flags & CLK_HAS_RATE) - return clk->rate; - else - return 0; -} - -static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate) -{ - return rate; -} - -static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -static int clk_register(struct clk *clk) -{ - mutex_lock(&clocks_mutex); - list_add(&clk->node, &clocks); - mutex_unlock(&clocks_mutex); - return 0; -} - -static unsigned long spmf_mult(void) -{ - /* - * Convert spmf to multiplier - */ - static int spmf_to_mult[] = { - 68, 1, 12, 16, - 20, 24, 28, 32, - 36, 40, 44, 48, - 52, 56, 60, 64 - }; - int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf; - return spmf_to_mult[spmf]; -} - -static unsigned long sysdiv_div_x_2(void) -{ - /* - * Convert sysdiv to divisor x 2 - * Some divisors have fractional parts so - * multiply by 2 then divide by this value - */ - static int sysdiv_to_div_x_2[] = { - 4, 5, 6, 7, - 8, 9, 10, 14, - 12, 16, 18, 22, - 20, 24, 26, 30, - 28, 32, 34, 38, - 36, 40, 42, 46, - 44, 48, 50, 54, - 52, 56, 58, 62, - 60, 64, 66, - }; - int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f; - return sysdiv_to_div_x_2[sysdiv]; -} - -static unsigned long ref_to_sys(unsigned long rate) -{ - rate *= spmf_mult(); - rate *= 2; - rate /= sysdiv_div_x_2(); - - return rate; -} - -static unsigned long sys_to_ref(unsigned long rate) -{ - rate *= sysdiv_div_x_2(); - rate /= 2; - rate /= spmf_mult(); - - return rate; -} - -static long ips_to_ref(unsigned long rate) -{ - int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7; - - rate *= ips_div; /* csb_clk = ips_clk * ips_div */ - rate *= 2; /* sys_clk = csb_clk * 2 */ - return sys_to_ref(rate); -} - -static unsigned long devtree_getfreq(char *clockname) -{ - struct device_node *np; - const unsigned int *prop; - unsigned int val = 0; - - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr"); - if (np) { - prop = of_get_property(np, clockname, NULL); - if (prop) - val = *prop; - of_node_put(np); - } - return val; -} - -static void ref_clk_calc(struct clk *clk) -{ - unsigned long rate; - - rate = devtree_getfreq("bus-frequency"); - if (rate == 0) { - printk(KERN_ERR "No bus-frequency in dev tree\n"); - clk->rate = 0; - return; - } - clk->rate = ips_to_ref(rate); -} - -static struct clk ref_clk = { - .name = "ref_clk", - .calc = ref_clk_calc, -}; - - -static void sys_clk_calc(struct clk *clk) -{ - clk->rate = ref_to_sys(ref_clk.rate); -} - -static struct clk sys_clk = { - .name = "sys_clk", - .calc = sys_clk_calc, -}; - -static void diu_clk_calc(struct clk *clk) -{ - int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff; - unsigned long rate; - - rate = sys_clk.rate; - - rate *= 2; - rate /= diudiv_x_2; - - clk->rate = rate; -} - -static void viu_clk_calc(struct clk *clk) -{ - unsigned long rate; - - rate = sys_clk.rate; - rate /= 2; - clk->rate = rate; -} - -static void half_clk_calc(struct clk *clk) -{ - clk->rate = clk->parent->rate / 2; -} - -static void generic_div_clk_calc(struct clk *clk) -{ - int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7; - - clk->rate = clk->parent->rate / div; -} - -static void unity_clk_calc(struct clk *clk) -{ - clk->rate = clk->parent->rate; -} - -static struct clk csb_clk = { - .name = "csb_clk", - .calc = half_clk_calc, - .parent = &sys_clk, -}; - -static void e300_clk_calc(struct clk *clk) -{ - int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf; - int ratex2 = clk->parent->rate * spmf; - - clk->rate = ratex2 / 2; -} - -static struct clk e300_clk = { - .name = "e300_clk", - .calc = e300_clk_calc, - .parent = &csb_clk, -}; - -static struct clk ips_clk = { - .name = "ips_clk", - .calc = generic_div_clk_calc, - .parent = &csb_clk, - .div_shift = 23, -}; - -/* - * Clocks controlled by SCCR1 (.reg = 0) - */ -static struct clk lpc_clk = { - .name = "lpc_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 30, - .calc = generic_div_clk_calc, - .parent = &ips_clk, - .div_shift = 11, -}; - -static struct clk nfc_clk = { - .name = "nfc_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 29, - .calc = generic_div_clk_calc, - .parent = &ips_clk, - .div_shift = 8, -}; - -static struct clk pata_clk = { - .name = "pata_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 28, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -/* - * PSC clocks (bits 27 - 16) - * are setup elsewhere - */ - -static struct clk sata_clk = { - .name = "sata_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 14, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk fec_clk = { - .name = "fec_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 13, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk pci_clk = { - .name = "pci_clk", - .flags = CLK_HAS_CTRL, - .reg = 0, - .bit = 11, - .calc = generic_div_clk_calc, - .parent = &csb_clk, - .div_shift = 20, -}; - -/* - * Clocks controlled by SCCR2 (.reg = 1) - */ -static struct clk diu_clk = { - .name = "diu_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 31, - .calc = diu_clk_calc, -}; - -static struct clk viu_clk = { - .name = "viu_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 18, - .calc = viu_clk_calc, -}; - -static struct clk axe_clk = { - .name = "axe_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 30, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk usb1_clk = { - .name = "usb1_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 28, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk usb2_clk = { - .name = "usb2_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 27, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk i2c_clk = { - .name = "i2c_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 26, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk mscan_clk = { - .name = "mscan_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 25, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk sdhc_clk = { - .name = "sdhc_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 24, - .calc = unity_clk_calc, - .parent = &ips_clk, -}; - -static struct clk mbx_bus_clk = { - .name = "mbx_bus_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 22, - .calc = half_clk_calc, - .parent = &csb_clk, -}; - -static struct clk mbx_clk = { - .name = "mbx_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 21, - .calc = unity_clk_calc, - .parent = &csb_clk, -}; - -static struct clk mbx_3d_clk = { - .name = "mbx_3d_clk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 20, - .calc = generic_div_clk_calc, - .parent = &mbx_bus_clk, - .div_shift = 14, -}; - -static void psc_mclk_in_calc(struct clk *clk) -{ - clk->rate = devtree_getfreq("psc_mclk_in"); - if (!clk->rate) - clk->rate = 25000000; -} - -static struct clk psc_mclk_in = { - .name = "psc_mclk_in", - .calc = psc_mclk_in_calc, -}; - -static struct clk spdif_txclk = { - .name = "spdif_txclk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 23, -}; - -static struct clk spdif_rxclk = { - .name = "spdif_rxclk", - .flags = CLK_HAS_CTRL, - .reg = 1, - .bit = 23, -}; - -static void ac97_clk_calc(struct clk *clk) -{ - /* ac97 bit clock is always 24.567 MHz */ - clk->rate = 24567000; -} - -static struct clk ac97_clk = { - .name = "ac97_clk_in", - .calc = ac97_clk_calc, -}; - -static struct clk *rate_clks[] = { - &ref_clk, - &sys_clk, - &diu_clk, - &viu_clk, - &csb_clk, - &e300_clk, - &ips_clk, - &fec_clk, - &sata_clk, - &pata_clk, - &nfc_clk, - &lpc_clk, - &mbx_bus_clk, - &mbx_clk, - &mbx_3d_clk, - &axe_clk, - &usb1_clk, - &usb2_clk, - &i2c_clk, - &mscan_clk, - &sdhc_clk, - &pci_clk, - &psc_mclk_in, - &spdif_txclk, - &spdif_rxclk, - &ac97_clk, - NULL -}; - -static void rate_clk_init(struct clk *clk) -{ - if (clk->calc) { - clk->calc(clk); - clk->flags |= CLK_HAS_RATE; - clk_register(clk); - } else { - printk(KERN_WARNING - "Could not initialize clk %s without a calc routine\n", - clk->name); - } -} - -static void rate_clks_init(void) -{ - struct clk **cpp, *clk; - - cpp = rate_clks; - while ((clk = *cpp++)) - rate_clk_init(clk); -} - -/* - * There are two clk enable registers with 32 enable bits each - * psc clocks and device clocks are all stored in dev_clks - */ -static struct clk dev_clks[2][32]; - -/* - * Given a psc number return the dev_clk - * associated with it - */ -static struct clk *psc_dev_clk(int pscnum) -{ - int reg, bit; - struct clk *clk; - - reg = 0; - bit = 27 - pscnum; - - clk = &dev_clks[reg][bit]; - clk->reg = 0; - clk->bit = bit; - return clk; -} - -/* - * PSC clock rate calculation - */ -static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np) -{ - unsigned long mclk_src = sys_clk.rate; - unsigned long mclk_div; - - /* - * Can only change value of mclk divider - * when the divider is disabled. - * - * Zero is not a valid divider so minimum - * divider is 1 - * - * disable/set divider/enable - */ - out_be32(&clockctl->pccr[pscnum], 0); - out_be32(&clockctl->pccr[pscnum], 0x00020000); - out_be32(&clockctl->pccr[pscnum], 0x00030000); - - if (in_be32(&clockctl->pccr[pscnum]) & 0x80) { - clk->rate = spdif_rxclk.rate; - return; - } - - switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) { - case 0: - mclk_src = sys_clk.rate; - break; - case 1: - mclk_src = ref_clk.rate; - break; - case 2: - mclk_src = psc_mclk_in.rate; - break; - case 3: - mclk_src = spdif_txclk.rate; - break; - } - - mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1; - clk->rate = mclk_src / mclk_div; -} - -/* - * Find all psc nodes in device tree and assign a clock - * with name "psc%d_mclk" and dev pointing at the device - * returned from of_find_device_by_node - */ -static void psc_clks_init(void) -{ - struct device_node *np; - struct platform_device *ofdev; - u32 reg; - const char *psc_compat; - - psc_compat = mpc512x_select_psc_compat(); - if (!psc_compat) - return; - - for_each_compatible_node(np, NULL, psc_compat) { - if (!of_property_read_u32(np, "reg", ®)) { - int pscnum = (reg & 0xf00) >> 8; - struct clk *clk = psc_dev_clk(pscnum); - - clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL; - ofdev = of_find_device_by_node(np); - clk->dev = &ofdev->dev; - /* - * AC97 is special rate clock does - * not go through normal path - */ - if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97")) - clk->rate = ac97_clk.rate; - else - psc_calc_rate(clk, pscnum, np); - sprintf(clk->name, "psc%d_mclk", pscnum); - clk_register(clk); - clk_enable(clk); - } - } -} - -static struct clk_interface mpc5121_clk_functions = { - .clk_get = mpc5121_clk_get, - .clk_enable = mpc5121_clk_enable, - .clk_disable = mpc5121_clk_disable, - .clk_get_rate = mpc5121_clk_get_rate, - .clk_put = mpc5121_clk_put, - .clk_round_rate = mpc5121_clk_round_rate, - .clk_set_rate = mpc5121_clk_set_rate, - .clk_set_parent = NULL, - .clk_get_parent = NULL, -}; - -int __init mpc5121_clk_init(void) -{ - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); - if (np) { - clockctl = of_iomap(np, 0); - of_node_put(np); - } - - if (!clockctl) { - printk(KERN_ERR "Could not map clock control registers\n"); - return 0; - } - - rate_clks_init(); - psc_clks_init(); - - /* leave clockctl mapped forever */ - /*iounmap(clockctl); */ - DEBUG_CLK_DUMP(); - clocks_initialized++; - clk_functions = mpc5121_clk_functions; - return 0; -} diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 36b5652..adb95f0 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -12,6 +12,7 @@ * (at your option) any later version. */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/io.h> #include <linux/irq.h> @@ -68,98 +69,112 @@ struct fsl_diu_shared_fb { bool in_use; }; -#define DIU_DIV_MASK 0x000000ff +/* receives a pixel clock spec in pico seconds, adjusts the DIU clock rate */ static void mpc512x_set_pixel_clock(unsigned int pixclock) { - unsigned long bestval, bestfreq, speed, busfreq; - unsigned long minpixclock, maxpixclock, pixval; - struct mpc512x_ccm __iomem *ccm; struct device_node *np; - u32 temp; - long err; - int i; + struct clk *clk_diu; + unsigned long epsilon, minpixclock, maxpixclock; + unsigned long offset, want, got, delta; - np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock"); + /* lookup and enable the DIU clock */ + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu"); if (!np) { - pr_err("Can't find clock control module.\n"); + pr_err("Could not find DIU device tree node.\n"); return; } - - ccm = of_iomap(np, 0); + clk_diu = of_clk_get(np, 0); + if (IS_ERR(clk_diu)) { + /* backwards compat with device trees that lack clock specs */ + clk_diu = clk_get_sys(np->name, "ipg"); + } of_node_put(np); - if (!ccm) { - pr_err("Can't map clock control module reg.\n"); + if (IS_ERR(clk_diu)) { + pr_err("Could not lookup DIU clock.\n"); return; } - - np = of_find_node_by_type(NULL, "cpu"); - if (np) { - const unsigned int *prop = - of_get_property(np, "bus-frequency", NULL); - - of_node_put(np); - if (prop) { - busfreq = *prop; - } else { - pr_err("Can't get bus-frequency property\n"); - return; - } - } else { - pr_err("Can't find 'cpu' node.\n"); + if (clk_prepare_enable(clk_diu)) { + pr_err("Could not enable DIU clock.\n"); return; } - /* Pixel Clock configuration */ - pr_debug("DIU: Bus Frequency = %lu\n", busfreq); - speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */ - - /* Calculate the pixel clock with the smallest error */ - /* calculate the following in steps to avoid overflow */ - pr_debug("DIU pixclock in ps - %d\n", pixclock); - temp = (1000000000 / pixclock) * 1000; - pixclock = temp; - pr_debug("DIU pixclock freq - %u\n", pixclock); - - temp = temp / 20; /* pixclock * 0.05 */ - pr_debug("deviation = %d\n", temp); - minpixclock = pixclock - temp; - maxpixclock = pixclock + temp; - pr_debug("DIU minpixclock - %lu\n", minpixclock); - pr_debug("DIU maxpixclock - %lu\n", maxpixclock); - pixval = speed/pixclock; - pr_debug("DIU pixval = %lu\n", pixval); - - err = LONG_MAX; - bestval = pixval; - pr_debug("DIU bestval = %lu\n", bestval); - - bestfreq = 0; - for (i = -1; i <= 1; i++) { - temp = speed / (pixval+i); - pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n", - i, pixval, temp); - if ((temp < minpixclock) || (temp > maxpixclock)) - pr_debug("DIU exceeds monitor range (%lu to %lu)\n", - minpixclock, maxpixclock); - else if (abs(temp - pixclock) < err) { - pr_debug("Entered the else if block %d\n", i); - err = abs(temp - pixclock); - bestval = pixval + i; - bestfreq = temp; - } + /* + * convert the picoseconds spec into the desired clock rate, + * determine the acceptable clock range for the monitor (+/- 5%), + * do the calculation in steps to avoid integer overflow + */ + pr_debug("DIU pixclock in ps - %u\n", pixclock); + pixclock = (1000000000 / pixclock) * 1000; + pr_debug("DIU pixclock freq - %u\n", pixclock); + epsilon = pixclock / 20; /* pixclock * 0.05 */ + pr_debug("DIU deviation - %lu\n", epsilon); + minpixclock = pixclock - epsilon; + maxpixclock = pixclock + epsilon; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + + /* + * check whether the DIU supports the desired pixel clock + * + * - simply request the desired clock and see what the + * platform's clock driver will make of it, assuming that it + * will setup the best approximation of the requested value + * - try other candidate frequencies in the order of decreasing + * preference (i.e. with increasing distance from the desired + * pixel clock, and checking the lower frequency before the + * higher frequency to not overload the hardware) until the + * first match is found -- any potential subsequent match + * would only be as good as the former match or typically + * would be less preferrable + * + * the offset increment of pixelclock divided by 64 is an + * arbitrary choice -- it's simple to calculate, in the typical + * case we expect the first check to succeed already, in the + * worst case seven frequencies get tested (the exact center and + * three more values each to the left and to the right) before + * the 5% tolerance window is exceeded, resulting in fast enough + * execution yet high enough probability of finding a suitable + * value, while the error rate will be in the order of single + * percents + */ + for (offset = 0; offset <= epsilon; offset += pixclock / 64) { + want = pixclock - offset; + pr_debug("DIU checking clock - %lu\n", want); + clk_set_rate(clk_diu, want); + got = clk_get_rate(clk_diu); + delta = abs(pixclock - got); + if (delta < epsilon) + break; + if (!offset) + continue; + want = pixclock + offset; + pr_debug("DIU checking clock - %lu\n", want); + clk_set_rate(clk_diu, want); + got = clk_get_rate(clk_diu); + delta = abs(pixclock - got); + if (delta < epsilon) + break; } + if (offset <= epsilon) { + pr_debug("DIU clock accepted - %lu\n", want); + pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n", + pixclock, got, delta, epsilon); + return; + } + pr_warn("DIU pixclock auto search unsuccessful\n"); - pr_debug("DIU chose = %lx\n", bestval); - pr_debug("DIU error = %ld\n NomPixClk ", err); - pr_debug("DIU: Best Freq = %lx\n", bestfreq); - /* Modify DIU_DIV in CCM SCFR1 */ - temp = in_be32(&ccm->scfr1); - pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp); - temp &= ~DIU_DIV_MASK; - temp |= (bestval & DIU_DIV_MASK); - out_be32(&ccm->scfr1, temp); - pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp); - iounmap(ccm); + /* + * what is the most appropriate action to take when the search + * for an available pixel clock which is acceptable to the + * monitor has failed? disable the DIU (clock) or just provide + * a "best effort"? we go with the latter + */ + pr_warn("DIU pixclock best effort fallback (backend's choice)\n"); + clk_set_rate(clk_diu, pixclock); + got = clk_get_rate(clk_diu); + delta = abs(pixclock - got); + pr_debug("DIU pixclock want %u, got %lu, delta %lu, eps %lu\n", + pixclock, got, delta, epsilon); } static enum fsl_diu_monitor_port diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index af54174..b625a2c 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -1,7 +1,7 @@ config PPC_MPC52xx bool "52xx-based boards" depends on 6xx - select PPC_CLOCK + select COMMON_CLK select PPC_PCI_CHOICE config PPC_MPC5200_SIMPLE diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c index be7b1aa..37f7a89 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -245,7 +245,7 @@ static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id) if (dma && !write) { spin_unlock_irqrestore(&lpbfifo.lock, flags); - pr_err("bogus LPBFIFO IRQ (dma and not writting)\n"); + pr_err("bogus LPBFIFO IRQ (dma and not writing)\n"); return IRQ_HANDLED; } diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 670a033..2bdc8c8 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -99,7 +99,6 @@ config SBC834x config ASP834x bool "Analogue & Micro ASP 834x" select PPC_MPC834x - select REDBOOT help This enables support for the Analogue & Micro ASP 83xx board. diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c index fd71cfd..e238b6a 100644 --- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c +++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c @@ -11,7 +11,6 @@ * (at your option) any later version. */ -#include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index 3d9716c..4b4c081 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -10,7 +10,6 @@ * by the Free Software Foundation. */ -#include <linux/init.h> #include <linux/pm.h> #include <linux/types.h> #include <linux/ioport.h> diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 4d46349..c17aae8 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -123,6 +123,12 @@ config P1023_RDS help This option enables support for the P1023 RDS and RDB boards +config TWR_P102x + bool "Freescale TWR-P102x" + select DEFAULT_UIMAGE + help + This option enables support for the TWR-P1025 board. + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index dd4c0b5..25cebe7 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o +obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index eba78c8..3b085c7 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -9,6 +9,7 @@ #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/qe.h> #include <sysdev/cpm2_pic.h> #include "mpc85xx.h" @@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void) irq_set_chained_handler(irq, cpm2_cascade); } #endif + +#ifdef CONFIG_QUICC_ENGINE +void __init mpc85xx_qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_name(NULL, "qe"); + if (!np) { + pr_err("%s: Could not find Quicc Engine node\n", + __func__); + return; + } + } + + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + qe_reset(); + of_node_put(np); + + np = of_find_node_by_name(NULL, "par_io"); + if (np) { + struct device_node *ucc; + + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(ucc, "ucc") + par_io_of_config(ucc); + + } +} +#endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index 2aa7c5d..fc51dd4 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void); static inline void __init mpc85xx_cpm2_pic_init(void) {} #endif /* CONFIG_CPM2 */ +#ifdef CONFIG_QUICC_ENGINE +extern void mpc85xx_qe_init(void); +#else +static inline void __init mpc85xx_qe_init(void) {} +#endif + #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index a7b3621..34f3c5e 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc. * All rights reserved. * * Author: Andy Fleming <afleming@freescale.com> @@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void) { struct device_node *np; - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_name(NULL, "qe"); - if (!np) - return; - } - - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - } - + mpc85xx_qe_init(); mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 53b6fb0..e15bdd1 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -1,7 +1,7 @@ /* * MPC85xx RDB Board Setup * - * Copyright 2009,2012 Freescale Semiconductor Inc. + * Copyright 2009,2012-2013 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void) fsl_pci_assign_primary(); #ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - pr_err("%s: Could not find Quicc Engine node\n", __func__); - goto qe_fail; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - - } + mpc85xx_qe_init(); #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) if (machine_is(p1025_rdb)) { @@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void) } #endif - -qe_fail: #endif /* CONFIG_QUICC_ENGINE */ printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c index b9197ce..bb75add 100644 --- a/arch/powerpc/platforms/85xx/sgy_cts1000.c +++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c @@ -14,7 +14,6 @@ #include <linux/platform_device.h> #include <linux/device.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/workqueue.h> diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 393f975..6382098 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) } #endif /* CONFIG_KEXEC */ -static void smp_85xx_setup_cpu(int cpu_nr) +static void smp_85xx_basic_setup(int cpu_nr) { - if (smp_85xx_ops.probe == smp_mpic_probe) - mpic_setup_this_cpu(); - if (cpu_has_feature(CPU_FTR_DBELL)) doorbell_setup_this_cpu(); } +static void smp_85xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); + smp_85xx_basic_setup(cpu_nr); +} + static const struct of_device_id mpc85xx_smp_guts_ids[] = { { .compatible = "fsl,mpc8572-guts", }, { .compatible = "fsl,p1020-guts", }, @@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void) { struct device_node *np; - smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; + smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; - } + } else + smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; if (cpu_has_feature(CPU_FTR_DBELL)) { /* @@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void) */ smp_85xx_ops.message_pass = NULL; smp_85xx_ops.cause_ipi = doorbell_cause_ipi; + smp_85xx_ops.probe = NULL; } np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids); diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c new file mode 100644 index 0000000..c25ff10 --- /dev/null +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -0,0 +1,147 @@ +/* + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. + * + * Author: Michael Johnston <michael.johnston@freescale.com> + * + * Description: + * TWR-P102x Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/pci-bridge.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/fsl_guts.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" + +static void __init twr_p1025_pic_init(void) +{ + struct mpic *mpic; + +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } else + pr_err("Could not find qe-ic node\n"); +#endif +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init twr_p1025_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("twr_p1025_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(twr_p1025)) { + struct ccsr_guts __iomem *guts; + + np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("twr_p1025: could not map global utilities register\n"); + else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + * Set QE mux bits in PMUXCR */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + +#if defined(CONFIG_SERIAL_QE) + /* On P1025TWR board, the UCC7 acted as UART port. + * However, The UCC7's CTS pin is low level in default, + * it will impact the transmission in full duplex + * communication. So disable the Flow control pin PA18. + * The UCC7 UART just can use RXD and TXD pins. + */ + par_io_config_pin(0, 18, 0, 0, 0, 0); +#endif + /* Drive PB29 to CPLD low - CPLD will then change + * muxing from LBC to QE */ + par_io_config_pin(1, 29, 1, 0, 0, 0); + par_io_data_set(1, 29, 0); + } + of_node_put(np); + } + } +#endif +#endif /* CONFIG_QUICC_ENGINE */ + + pr_info("TWR-P1025 board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices); + +static int __init twr_p1025_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,TWR-P1025"); +} + +define_machine(twr_p1025) { + .name = "TWR-P1025", + .probe = twr_p1025_probe, + .setup_arch = twr_p1025_setup_arch, + .init_IRQ = twr_p1025_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 8dec3c0..bd6f1a1 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -45,7 +45,6 @@ config PPC_EP88XC config PPC_ADDER875 bool "Analogue & Micro Adder 875" select CPM1 - select REDBOOT help This enables support for the Analogue & Micro Adder 875 board. diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index bca2465..434fda3 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -72,6 +72,7 @@ config PPC_BOOK3S_64 select PPC_HAVE_PMU_SUPPORT select SYS_SUPPORTS_HUGETLBFS select HAVE_ARCH_TRANSPARENT_HUGEPAGE if PPC_64K_PAGES + select ARCH_SUPPORTS_NUMA_BALANCING config PPC_BOOK3E_64 bool "Embedded processors" diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c index c34ee4e..d4d245c 100644 --- a/arch/powerpc/platforms/cell/beat_htab.c +++ b/arch/powerpc/platforms/cell/beat_htab.c @@ -111,7 +111,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); if (rflags & _PAGE_NO_CACHE) - hpte_r &= ~_PAGE_COHERENT; + hpte_r &= ~HPTE_R_M; raw_spin_lock(&beat_htab_lock); lpar_rc = beat_read_mask(hpte_group); @@ -337,7 +337,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group, DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); if (rflags & _PAGE_NO_CACHE) - hpte_r &= ~_PAGE_COHERENT; + hpte_r &= ~HPTE_R_M; /* insert into not-volted entry */ lpar_rc = beat_insert_htab_entry3(0, hpte_group, hpte_v, hpte_r, diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index b535606..2b90ff8 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -197,7 +197,7 @@ static int tce_build_cell(struct iommu_table *tbl, long index, long npages, io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); - for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) + for (i = 0; i < npages; i++, uaddr += tbl->it_page_shift) io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask); mb(); @@ -430,7 +430,7 @@ static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, { cell_iommu_setup_stab(iommu, base, size, 0, 0); iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, - IOMMU_PAGE_SHIFT); + IOMMU_PAGE_SHIFT_4K); cell_iommu_enable_hardware(iommu); } @@ -487,8 +487,10 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; - window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; - window->table.it_size = size >> IOMMU_PAGE_SHIFT; + window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; + window->table.it_offset = + (offset >> window->table.it_page_shift) + pte_offset; + window->table.it_size = size >> window->table.it_page_shift; iommu_init_table(&window->table, iommu->nid); @@ -773,7 +775,7 @@ static void __init cell_iommu_init_one(struct device_node *np, /* Setup the iommu_table */ cell_iommu_setup_window(iommu, np, base, size, - offset >> IOMMU_PAGE_SHIFT); + offset >> IOMMU_PAGE_SHIFT_4K); } static void __init cell_disable_iommus(void) @@ -1122,7 +1124,7 @@ static int __init cell_iommu_fixed_mapping_init(void) cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, - IOMMU_PAGE_SHIFT); + IOMMU_PAGE_SHIFT_4K); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index dead91b..b6c9a0d 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -14,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/kernel_stat.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/spinlock.h> #include <asm/ptrace.h> diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 302ba43..6d3c7a9 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -67,6 +67,18 @@ config PPC_C2K This option enables support for the GE Fanuc C2K board (formerly an SBS board). +config MVME5100 + bool "Motorola/Emerson MVME5100" + depends on EMBEDDED6xx + select MPIC + select PCI + select PPC_INDIRECT_PCI + select PPC_I8259 + select PPC_NATIVE + help + This option enables support for the Motorola (now Emerson) MVME5100 + board. + config TSI108_BRIDGE bool select PCI @@ -113,4 +125,3 @@ config WII help Select WII if configuring for the Nintendo Wii. More information at: <http://gc-linux.sourceforge.net/> - diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index 66c23e4..cdd48d4 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o obj-$(CONFIG_GAMECUBE) += gamecube.o obj-$(CONFIG_WII) += wii.o hlwd-pic.o +obj-$(CONFIG_MVME5100) += mvme5100.o diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index 6c03034..c269cae 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -15,7 +15,6 @@ #define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> #include <linux/of.h> #include <linux/of_address.h> diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c new file mode 100644 index 0000000..25e3bfb --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c @@ -0,0 +1,221 @@ +/* + * Board setup routines for the Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * Based on earlier code by: + * + * Matt Porter, MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Stephen Chivers <schivers@csc.com> + * + */ + +#include <linux/of_platform.h> + +#include <asm/i8259.h> +#include <asm/pci-bridge.h> +#include <asm/mpic.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#define HAWK_MPIC_SIZE 0x00040000U +#define MVME5100_PCI_MEM_OFFSET 0x00000000 + +/* Board register addresses. */ +#define BOARD_STATUS_REG 0xfef88080 +#define BOARD_MODFAIL_REG 0xfef88090 +#define BOARD_MODRST_REG 0xfef880a0 +#define BOARD_TBEN_REG 0xfef880c0 +#define BOARD_SW_READ_REG 0xfef880e0 +#define BOARD_GEO_ADDR_REG 0xfef880e8 +#define BOARD_EXT_FEATURE1_REG 0xfef880f0 +#define BOARD_EXT_FEATURE2_REG 0xfef88100 + +static phys_addr_t pci_membase; +static u_char *restart; + +static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init mvme5100_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cp = NULL; + unsigned int cirq; + unsigned long intack = 0; + const u32 *prop = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, pci_membase + 0x10000); + + mpic_init(mpic); + + cp = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (cp == NULL) { + pr_warn("mvme5100_pic_init: couldn't find i8259\n"); + return; + } + + cirq = irq_of_parse_and_map(cp, 0); + if (cirq == NO_IRQ) { + pr_warn("mvme5100_pic_init: no cascade interrupt?\n"); + return; + } + + np = of_find_compatible_node(NULL, "pci", "mpc10x-pci"); + if (np) { + prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); + + if (prop) + intack = prop[0]; + + of_node_put(np); + } + + if (intack) + pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n", + intack); + + i8259_init(cp, intack); + of_node_put(cp); + irq_set_chained_handler(cirq, mvme5100_8259_cascade); +} + +static int __init mvme5100_add_bridge(struct device_node *dev) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + unsigned short devid; + + pr_info("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = of_get_property(dev, "bus-range", &len); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0); + + pci_process_bridge_OF_ranges(hose, dev, 1); + + early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid); + + if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) { + pr_err("HAWK PHB not present?\n"); + return 0; + } + + early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); + + if (pci_membase == 0) { + pr_err("HAWK PHB mibar not correctly set?\n"); + return 0; + } + + pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase); + + return 0; +} + +static struct of_device_id mvme5100_of_bus_ids[] __initdata = { + { .compatible = "hawk-bridge", }, + {}, +}; + +/* + * Setup the architecture + */ +static void __init mvme5100_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mvme5100_setup_arch()", 0); + + for_each_compatible_node(np, "pci", "hawk-pci") + mvme5100_add_bridge(np); + + restart = ioremap(BOARD_MODRST_REG, 4); +} + + +static void mvme5100_show_cpuinfo(struct seq_file *m) +{ + seq_puts(m, "Vendor\t\t: Motorola/Emerson\n"); + seq_puts(m, "Machine\t\t: MVME5100\n"); +} + +static void mvme5100_restart(char *cmd) +{ + + local_irq_disable(); + mtmsr(mfmsr() | MSR_IP); + + out_8((u_char *) restart, 0x01); + + while (1) + ; +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme5100_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MVME5100"); +} + +static int __init probe_of_platform_devices(void) +{ + + of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL); + return 0; +} + +machine_device_initcall(mvme5100, probe_of_platform_devices); + +define_machine(mvme5100) { + .name = "MVME5100", + .probe = mvme5100_probe, + .setup_arch = mvme5100_setup_arch, + .init_IRQ = mvme5100_pic_init, + .show_cpuinfo = mvme5100_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mvme5100_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index f3defd8..aafa01ba 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -18,7 +18,6 @@ */ #include <linux/kernel.h> -#include <linux/init.h> #include <linux/export.h> #include <linux/pci.h> #include <linux/slab.h> diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 7d2d036..2e576f2 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -138,8 +138,11 @@ static void iommu_table_iobmap_setup(void) pr_debug(" -> %s\n", __func__); iommu_table_iobmap.it_busno = 0; iommu_table_iobmap.it_offset = 0; + iommu_table_iobmap.it_page_shift = IOBMAP_PAGE_SHIFT; + /* it_size is in number of entries */ - iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT; + iommu_table_iobmap.it_size = + 0x80000000 >> iommu_table_iobmap.it_page_shift; /* Initialize the common IOMMU code */ iommu_table_iobmap.it_base = (unsigned long)iob_l2_base; diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index d588e48..4307508 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -5,7 +5,6 @@ * FIXME: LOCKING !!! */ -#include <linux/init.h> #include <linux/delay.h> #include <linux/kernel.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig index 9fced3f..895e8a2 100644 --- a/arch/powerpc/platforms/powernv/Kconfig +++ b/arch/powerpc/platforms/powernv/Kconfig @@ -13,11 +13,6 @@ config PPC_POWERNV select ARCH_RANDOM default y -config POWERNV_MSI - bool "Support PCI MSI on PowerNV platform" - depends on PCI_MSI - default y - config PPC_POWERNV_RTAS depends on PPC_POWERNV bool "Support for RTAS based PowerNV platforms such as BML" diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile index 873fa13..8d767fd 100644 --- a/arch/powerpc/platforms/powernv/Makefile +++ b/arch/powerpc/platforms/powernv/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o obj-$(CONFIG_EEH) += eeh-ioda.o eeh-powernv.o obj-$(CONFIG_PPC_SCOM) += opal-xscom.o +obj-$(CONFIG_MEMORY_FAILURE) += opal-memory-errors.o diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index d7ddcee..e1e7161 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -14,7 +14,6 @@ #include <linux/bootmem.h> #include <linux/debugfs.h> #include <linux/delay.h> -#include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/kernel.h> @@ -578,11 +577,8 @@ static int ioda_eeh_get_log(struct eeh_pe *pe, int severity, return -EIO; } - /* - * FIXME: We probably need log the error in somewhere. - * Lets make it up in future. - */ - /* pr_info("%s", phb->diag.blob); */ + /* The PHB diag-data is always indicative */ + pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); spin_unlock_irqrestore(&phb->lock, flags); @@ -670,143 +666,9 @@ static void ioda_eeh_hub_diag(struct pci_controller *hose) } } -static void ioda_eeh_p7ioc_phb_diag(struct pci_controller *hose, - struct OpalIoPhbErrorCommon *common) -{ - struct OpalIoP7IOCPhbErrorData *data; - int i; - - data = (struct OpalIoP7IOCPhbErrorData *)common; - - pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n\n", - hose->global_number, common->version); - - pr_info(" brdgCtl: %08x\n", data->brdgCtl); - - pr_info(" portStatusReg: %08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); - - pr_info(" deviceStatus: %08x\n", data->deviceStatus); - pr_info(" slotStatus: %08x\n", data->slotStatus); - pr_info(" linkStatus: %08x\n", data->linkStatus); - pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); - pr_info(" devSecStatus: %08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); - pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); - pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); - pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); - pr_info(" sourceId: %08x\n", data->sourceId); - - pr_info(" errorClass: %016llx\n", data->errorClass); - pr_info(" correlator: %016llx\n", data->correlator); - pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr); - pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr); - pr_info(" lemFir: %016llx\n", data->lemFir); - pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); - pr_info(" lemWOF: %016llx\n", data->lemWOF); - pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); - - for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { - if ((data->pestA[i] >> 63) == 0 && - (data->pestB[i] >> 63) == 0) - continue; - - pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); - pr_info(" PESTB: %016llx\n", data->pestB[i]); - } -} - -static void ioda_eeh_phb3_phb_diag(struct pci_controller *hose, - struct OpalIoPhbErrorCommon *common) -{ - struct OpalIoPhb3ErrorData *data; - int i; - - data = (struct OpalIoPhb3ErrorData*)common; - pr_info("PHB3 PHB#%x Diag-data (Version: %d)\n\n", - hose->global_number, common->version); - - pr_info(" brdgCtl: %08x\n", data->brdgCtl); - - pr_info(" portStatusReg: %08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); - - pr_info(" deviceStatus: %08x\n", data->deviceStatus); - pr_info(" slotStatus: %08x\n", data->slotStatus); - pr_info(" linkStatus: %08x\n", data->linkStatus); - pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); - pr_info(" devSecStatus: %08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); - pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); - pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); - pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); - pr_info(" sourceId: %08x\n", data->sourceId); - pr_info(" errorClass: %016llx\n", data->errorClass); - pr_info(" correlator: %016llx\n", data->correlator); - pr_info(" nFir: %016llx\n", data->nFir); - pr_info(" nFirMask: %016llx\n", data->nFirMask); - pr_info(" nFirWOF: %016llx\n", data->nFirWOF); - pr_info(" PhbPlssr: %016llx\n", data->phbPlssr); - pr_info(" PhbCsr: %016llx\n", data->phbCsr); - pr_info(" lemFir: %016llx\n", data->lemFir); - pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); - pr_info(" lemWOF: %016llx\n", data->lemWOF); - pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); - - for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) { - if ((data->pestA[i] >> 63) == 0 && - (data->pestB[i] >> 63) == 0) - continue; - - pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); - pr_info(" PESTB: %016llx\n", data->pestB[i]); - } -} - static void ioda_eeh_phb_diag(struct pci_controller *hose) { struct pnv_phb *phb = hose->private_data; - struct OpalIoPhbErrorCommon *common; long rc; rc = opal_pci_get_phb_diag_data2(phb->opal_id, phb->diag.blob, @@ -817,18 +679,7 @@ static void ioda_eeh_phb_diag(struct pci_controller *hose) return; } - common = (struct OpalIoPhbErrorCommon *)phb->diag.blob; - switch (common->ioType) { - case OPAL_PHB_ERROR_DATA_TYPE_P7IOC: - ioda_eeh_p7ioc_phb_diag(hose, common); - break; - case OPAL_PHB_ERROR_DATA_TYPE_PHB3: - ioda_eeh_phb3_phb_diag(hose, common); - break; - default: - pr_warning("%s: Unrecognized I/O chip %d\n", - __func__, common->ioType); - } + pnv_pci_dump_phb_diag_data(hose, phb->diag.blob); } static int ioda_eeh_get_phb_pe(struct pci_controller *hose, @@ -862,11 +713,7 @@ static int ioda_eeh_get_pe(struct pci_controller *hose, dev.phb = hose; dev.pe_config_addr = pe_no; dev_pe = eeh_pe_get(&dev); - if (!dev_pe) { - pr_warning("%s: Can't find PE for PHB#%x - PE#%x\n", - __func__, hose->global_number, pe_no); - return -EEXIST; - } + if (!dev_pe) return -EEXIST; *pe = dev_pe; return 0; @@ -884,12 +731,12 @@ static int ioda_eeh_get_pe(struct pci_controller *hose, */ static int ioda_eeh_next_error(struct eeh_pe **pe) { - struct pci_controller *hose, *tmp; + struct pci_controller *hose; struct pnv_phb *phb; u64 frozen_pe_no; u16 err_type, severity; long rc; - int ret = 1; + int ret = EEH_NEXT_ERR_NONE; /* * While running here, it's safe to purge the event queue. @@ -899,7 +746,7 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) eeh_remove_event(NULL); opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul); - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + list_for_each_entry(hose, &hose_list, list_node) { /* * If the subordinate PCI buses of the PHB has been * removed, we needn't take care of it any more. @@ -938,19 +785,19 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) switch (err_type) { case OPAL_EEH_IOC_ERROR: if (severity == OPAL_EEH_SEV_IOC_DEAD) { - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { + list_for_each_entry(hose, &hose_list, + list_node) { phb = hose->private_data; phb->eeh_state |= PNV_EEH_STATE_REMOVED; } pr_err("EEH: dead IOC detected\n"); - ret = 4; - goto out; + ret = EEH_NEXT_ERR_DEAD_IOC; } else if (severity == OPAL_EEH_SEV_INF) { pr_info("EEH: IOC informative error " "detected\n"); ioda_eeh_hub_diag(hose); + ret = EEH_NEXT_ERR_NONE; } break; @@ -962,37 +809,61 @@ static int ioda_eeh_next_error(struct eeh_pe **pe) pr_err("EEH: dead PHB#%x detected\n", hose->global_number); phb->eeh_state |= PNV_EEH_STATE_REMOVED; - ret = 3; - goto out; + ret = EEH_NEXT_ERR_DEAD_PHB; } else if (severity == OPAL_EEH_SEV_PHB_FENCED) { if (ioda_eeh_get_phb_pe(hose, pe)) break; pr_err("EEH: fenced PHB#%x detected\n", hose->global_number); - ret = 2; - goto out; + ret = EEH_NEXT_ERR_FENCED_PHB; } else if (severity == OPAL_EEH_SEV_INF) { pr_info("EEH: PHB#%x informative error " "detected\n", hose->global_number); ioda_eeh_phb_diag(hose); + ret = EEH_NEXT_ERR_NONE; } break; case OPAL_EEH_PE_ERROR: - if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) - break; + /* + * If we can't find the corresponding PE, the + * PEEV / PEST would be messy. So we force an + * fenced PHB so that it can be recovered. + */ + if (ioda_eeh_get_pe(hose, frozen_pe_no, pe)) { + if (!ioda_eeh_get_phb_pe(hose, pe)) { + pr_err("EEH: Escalated fenced PHB#%x " + "detected for PE#%llx\n", + hose->global_number, + frozen_pe_no); + ret = EEH_NEXT_ERR_FENCED_PHB; + } else { + ret = EEH_NEXT_ERR_NONE; + } + } else { + pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", + (*pe)->addr, (*pe)->phb->global_number); + ret = EEH_NEXT_ERR_FROZEN_PE; + } - pr_err("EEH: Frozen PE#%x on PHB#%x detected\n", - (*pe)->addr, (*pe)->phb->global_number); - ret = 1; - goto out; + break; + default: + pr_warn("%s: Unexpected error type %d\n", + __func__, err_type); } + + /* + * If we have no errors on the specific PHB or only + * informative error there, we continue poking it. + * Otherwise, we need actions to be taken by upper + * layer. + */ + if (ret > EEH_NEXT_ERR_INF) + break; } - ret = 0; -out: return ret; } diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 73b9814..a79fddc 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -344,6 +344,27 @@ static int powernv_eeh_next_error(struct eeh_pe **pe) return -EEXIST; } +static int powernv_eeh_restore_config(struct device_node *dn) +{ + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + struct pnv_phb *phb; + s64 ret; + + if (!edev) + return -EEXIST; + + phb = edev->phb->private_data; + ret = opal_pci_reinit(phb->opal_id, + OPAL_REINIT_PCI_DEV, edev->config_addr); + if (ret) { + pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n", + __func__, edev->config_addr, ret); + return -EIO; + } + + return 0; +} + static struct eeh_ops powernv_eeh_ops = { .name = "powernv", .init = powernv_eeh_init, @@ -359,7 +380,8 @@ static struct eeh_ops powernv_eeh_ops = { .configure_bridge = powernv_eeh_configure_bridge, .read_config = pnv_pci_cfg_read, .write_config = pnv_pci_cfg_write, - .next_error = powernv_eeh_next_error + .next_error = powernv_eeh_next_error, + .restore_config = powernv_eeh_restore_config }; /** diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c index 6ffa6b1..714ef97 100644 --- a/arch/powerpc/platforms/powernv/opal-flash.c +++ b/arch/powerpc/platforms/powernv/opal-flash.c @@ -76,8 +76,8 @@ /* Validate buffer size */ #define VALIDATE_BUF_SIZE 4096 -/* XXX: Assume candidate image size is <= 256MB */ -#define MAX_IMAGE_SIZE 0x10000000 +/* XXX: Assume candidate image size is <= 1GB */ +#define MAX_IMAGE_SIZE 0x40000000 /* Flash sg list version */ #define SG_LIST_VERSION (1UL) @@ -103,30 +103,9 @@ struct image_header_t { uint32_t size; }; -/* Scatter/gather entry */ -struct opal_sg_entry { - void *data; - long length; -}; - -/* We calculate number of entries based on PAGE_SIZE */ -#define SG_ENTRIES_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct opal_sg_entry)) - -/* - * This struct is very similar but not identical to that - * needed by the opal flash update. All we need to do for - * opal is rewrite num_entries into a version/length and - * translate the pointers to absolute. - */ -struct opal_sg_list { - unsigned long num_entries; - struct opal_sg_list *next; - struct opal_sg_entry entry[SG_ENTRIES_PER_NODE]; -}; - struct validate_flash_t { int status; /* Return status */ - void *buf; /* Candiate image buffer */ + void *buf; /* Candidate image buffer */ uint32_t buf_size; /* Image size */ uint32_t result; /* Update results token */ }; @@ -333,7 +312,7 @@ static struct opal_sg_list *image_data_to_sglist(void) addr = image_data.data; size = image_data.size; - sg1 = kzalloc((sizeof(struct opal_sg_list)), GFP_KERNEL); + sg1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!sg1) return NULL; @@ -351,8 +330,7 @@ static struct opal_sg_list *image_data_to_sglist(void) sg1->num_entries++; if (sg1->num_entries >= SG_ENTRIES_PER_NODE) { - sg1->next = kzalloc((sizeof(struct opal_sg_list)), - GFP_KERNEL); + sg1->next = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!sg1->next) { pr_err("%s : Failed to allocate memory\n", __func__); @@ -402,7 +380,10 @@ static int opal_flash_update(int op) else sg->next = NULL; - /* Make num_entries into the version/length field */ + /* + * Convert num_entries to version/length format + * to satisfy OPAL. + */ sg->num_entries = (SG_LIST_VERSION << 56) | (sg->num_entries * sizeof(struct opal_sg_entry) + 16); } @@ -500,7 +481,7 @@ static int alloc_image_buf(char *buffer, size_t count) memcpy(&image_header, (void *)buffer, sizeof(struct image_header_t)); image_data.size = be32_to_cpu(image_header.size); - pr_debug("FLASH: Candiate image size = %u\n", image_data.size); + pr_debug("FLASH: Candidate image size = %u\n", image_data.size); if (image_data.size > MAX_IMAGE_SIZE) { pr_warn("FLASH: Too large image\n"); diff --git a/arch/powerpc/platforms/powernv/opal-memory-errors.c b/arch/powerpc/platforms/powernv/opal-memory-errors.c new file mode 100644 index 0000000..ec413223 --- /dev/null +++ b/arch/powerpc/platforms/powernv/opal-memory-errors.c @@ -0,0 +1,146 @@ +/* + * OPAL asynchronus Memory error handling support in PowreNV. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2013 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/mm.h> +#include <linux/slab.h> + +#include <asm/opal.h> +#include <asm/cputable.h> + +static int opal_mem_err_nb_init; +static LIST_HEAD(opal_memory_err_list); +static DEFINE_SPINLOCK(opal_mem_err_lock); + +struct OpalMsgNode { + struct list_head list; + struct opal_msg msg; +}; + +static void handle_memory_error_event(struct OpalMemoryErrorData *merr_evt) +{ + uint64_t paddr_start, paddr_end; + + pr_debug("%s: Retrived memory error event, type: 0x%x\n", + __func__, merr_evt->type); + switch (merr_evt->type) { + case OPAL_MEM_ERR_TYPE_RESILIENCE: + paddr_start = merr_evt->u.resilience.physical_address_start; + paddr_end = merr_evt->u.resilience.physical_address_end; + break; + case OPAL_MEM_ERR_TYPE_DYN_DALLOC: + paddr_start = merr_evt->u.dyn_dealloc.physical_address_start; + paddr_end = merr_evt->u.dyn_dealloc.physical_address_end; + break; + default: + return; + } + + for (; paddr_start < paddr_end; paddr_start += PAGE_SIZE) { + memory_failure(paddr_start >> PAGE_SHIFT, 0, 0); + } +} + +static void handle_memory_error(void) +{ + unsigned long flags; + struct OpalMemoryErrorData *merr_evt; + struct OpalMsgNode *msg_node; + + spin_lock_irqsave(&opal_mem_err_lock, flags); + while (!list_empty(&opal_memory_err_list)) { + msg_node = list_entry(opal_memory_err_list.next, + struct OpalMsgNode, list); + list_del(&msg_node->list); + spin_unlock_irqrestore(&opal_mem_err_lock, flags); + + merr_evt = (struct OpalMemoryErrorData *) + &msg_node->msg.params[0]; + handle_memory_error_event(merr_evt); + kfree(msg_node); + spin_lock_irqsave(&opal_mem_err_lock, flags); + } + spin_unlock_irqrestore(&opal_mem_err_lock, flags); +} + +static void mem_error_handler(struct work_struct *work) +{ + handle_memory_error(); +} + +static DECLARE_WORK(mem_error_work, mem_error_handler); + +/* + * opal_memory_err_event - notifier handler that queues up the opal message + * to be preocessed later. + */ +static int opal_memory_err_event(struct notifier_block *nb, + unsigned long msg_type, void *msg) +{ + unsigned long flags; + struct OpalMsgNode *msg_node; + + if (msg_type != OPAL_MSG_MEM_ERR) + return 0; + + msg_node = kzalloc(sizeof(*msg_node), GFP_ATOMIC); + if (!msg_node) { + pr_err("MEMORY_ERROR: out of memory, Opal message event not" + "handled\n"); + return -ENOMEM; + } + memcpy(&msg_node->msg, msg, sizeof(struct opal_msg)); + + spin_lock_irqsave(&opal_mem_err_lock, flags); + list_add(&msg_node->list, &opal_memory_err_list); + spin_unlock_irqrestore(&opal_mem_err_lock, flags); + + schedule_work(&mem_error_work); + return 0; +} + +static struct notifier_block opal_mem_err_nb = { + .notifier_call = opal_memory_err_event, + .next = NULL, + .priority = 0, +}; + +static int __init opal_mem_err_init(void) +{ + int ret; + + if (!opal_mem_err_nb_init) { + ret = opal_message_notifier_register( + OPAL_MSG_MEM_ERR, &opal_mem_err_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + opal_mem_err_nb_init = 1; + } + return 0; +} +subsys_initcall(opal_mem_err_init); diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c index 7d07c7e8..b1885db 100644 --- a/arch/powerpc/platforms/powernv/opal-rtc.c +++ b/arch/powerpc/platforms/powernv/opal-rtc.c @@ -18,6 +18,7 @@ #include <asm/opal.h> #include <asm/firmware.h> +#include <asm/machdep.h> static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm) { @@ -48,8 +49,11 @@ unsigned long __init opal_get_boot_time(void) else mdelay(10); } - if (rc != OPAL_SUCCESS) + if (rc != OPAL_SUCCESS) { + ppc_md.get_rtc_time = NULL; + ppc_md.set_rtc_time = NULL; return 0; + } y_m_d = be32_to_cpu(__y_m_d); h_m_s_ms = be64_to_cpu(__h_m_s_ms); opal_to_tm(y_m_d, h_m_s_ms, &tm); diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index e780650..3e8829c 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -126,3 +126,6 @@ OPAL_CALL(opal_return_cpu, OPAL_RETURN_CPU); OPAL_CALL(opal_validate_flash, OPAL_FLASH_VALIDATE); OPAL_CALL(opal_manage_flash, OPAL_FLASH_MANAGE); OPAL_CALL(opal_update_flash, OPAL_FLASH_UPDATE); +OPAL_CALL(opal_get_msg, OPAL_GET_MSG); +OPAL_CALL(opal_check_completion, OPAL_CHECK_ASYNC_COMPLETION); +OPAL_CALL(opal_sync_host_reboot, OPAL_SYNC_HOST_REBOOT); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 1c798cd..65499ad 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -18,9 +18,12 @@ #include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/slab.h> +#include <linux/sched.h> #include <linux/kobject.h> +#include <linux/delay.h> #include <asm/opal.h> #include <asm/firmware.h> +#include <asm/mce.h> #include "powernv.h" @@ -38,6 +41,7 @@ extern u64 opal_mc_secondary_handler[]; static unsigned int *opal_irqs; static unsigned int opal_irq_count; static ATOMIC_NOTIFIER_HEAD(opal_notifier_head); +static struct atomic_notifier_head opal_msg_notifier_head[OPAL_MSG_TYPE_MAX]; static DEFINE_SPINLOCK(opal_notifier_lock); static uint64_t last_notified_mask = 0x0ul; static atomic_t opal_notifier_hold = ATOMIC_INIT(0); @@ -88,14 +92,10 @@ static int __init opal_register_exception_handlers(void) if (!(powerpc_firmware_features & FW_FEATURE_OPAL)) return -ENODEV; - /* Hookup some exception handlers. We use the fwnmi area at 0x7000 - * to provide the glue space to OPAL + /* Hookup some exception handlers except machine check. We use the + * fwnmi area at 0x7000 to provide the glue space to OPAL */ glue = 0x7000; - opal_register_exception_handler(OPAL_MACHINE_CHECK_HANDLER, - __pa(opal_mc_secondary_handler[0]), - glue); - glue += 128; opal_register_exception_handler(OPAL_HYPERVISOR_MAINTENANCE_HANDLER, 0, glue); glue += 128; @@ -169,6 +169,95 @@ void opal_notifier_disable(void) atomic_set(&opal_notifier_hold, 1); } +/* + * Opal message notifier based on message type. Allow subscribers to get + * notified for specific messgae type. + */ +int opal_message_notifier_register(enum OpalMessageType msg_type, + struct notifier_block *nb) +{ + if (!nb) { + pr_warning("%s: Invalid argument (%p)\n", + __func__, nb); + return -EINVAL; + } + if (msg_type > OPAL_MSG_TYPE_MAX) { + pr_warning("%s: Invalid message type argument (%d)\n", + __func__, msg_type); + return -EINVAL; + } + return atomic_notifier_chain_register( + &opal_msg_notifier_head[msg_type], nb); +} + +static void opal_message_do_notify(uint32_t msg_type, void *msg) +{ + /* notify subscribers */ + atomic_notifier_call_chain(&opal_msg_notifier_head[msg_type], + msg_type, msg); +} + +static void opal_handle_message(void) +{ + s64 ret; + /* + * TODO: pre-allocate a message buffer depending on opal-msg-size + * value in /proc/device-tree. + */ + static struct opal_msg msg; + + ret = opal_get_msg(__pa(&msg), sizeof(msg)); + /* No opal message pending. */ + if (ret == OPAL_RESOURCE) + return; + + /* check for errors. */ + if (ret) { + pr_warning("%s: Failed to retrive opal message, err=%lld\n", + __func__, ret); + return; + } + + /* Sanity check */ + if (msg.msg_type > OPAL_MSG_TYPE_MAX) { + pr_warning("%s: Unknown message type: %u\n", + __func__, msg.msg_type); + return; + } + opal_message_do_notify(msg.msg_type, (void *)&msg); +} + +static int opal_message_notify(struct notifier_block *nb, + unsigned long events, void *change) +{ + if (events & OPAL_EVENT_MSG_PENDING) + opal_handle_message(); + return 0; +} + +static struct notifier_block opal_message_nb = { + .notifier_call = opal_message_notify, + .next = NULL, + .priority = 0, +}; + +static int __init opal_message_init(void) +{ + int ret, i; + + for (i = 0; i < OPAL_MSG_TYPE_MAX; i++) + ATOMIC_INIT_NOTIFIER_HEAD(&opal_msg_notifier_head[i]); + + ret = opal_notifier_register(&opal_message_nb); + if (ret) { + pr_err("%s: Can't register OPAL event notifier (%d)\n", + __func__, ret); + return ret; + } + return 0; +} +early_initcall(opal_message_init); + int opal_get_chars(uint32_t vtermno, char *buf, int count) { s64 rc; @@ -254,119 +343,62 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len) return written; } +static int opal_recover_mce(struct pt_regs *regs, + struct machine_check_event *evt) +{ + int recovered = 0; + uint64_t ea = get_mce_fault_addr(evt); + + if (!(regs->msr & MSR_RI)) { + /* If MSR_RI isn't set, we cannot recover */ + recovered = 0; + } else if (evt->disposition == MCE_DISPOSITION_RECOVERED) { + /* Platform corrected itself */ + recovered = 1; + } else if (ea && !is_kernel_addr(ea)) { + /* + * Faulting address is not in kernel text. We should be fine. + * We need to find which process uses this address. + * For now, kill the task if we have received exception when + * in userspace. + * + * TODO: Queue up this address for hwpoisioning later. + */ + if (user_mode(regs) && !is_global_init(current)) { + _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); + recovered = 1; + } else + recovered = 0; + } else if (user_mode(regs) && !is_global_init(current) && + evt->severity == MCE_SEV_ERROR_SYNC) { + /* + * If we have received a synchronous error when in userspace + * kill the task. + */ + _exception(SIGBUS, regs, BUS_MCEERR_AR, regs->nip); + recovered = 1; + } + return recovered; +} + int opal_machine_check(struct pt_regs *regs) { - struct opal_machine_check_event *opal_evt = get_paca()->opal_mc_evt; - struct opal_machine_check_event evt; - const char *level, *sevstr, *subtype; - static const char *opal_mc_ue_types[] = { - "Indeterminate", - "Instruction fetch", - "Page table walk ifetch", - "Load/Store", - "Page table walk Load/Store", - }; - static const char *opal_mc_slb_types[] = { - "Indeterminate", - "Parity", - "Multihit", - }; - static const char *opal_mc_erat_types[] = { - "Indeterminate", - "Parity", - "Multihit", - }; - static const char *opal_mc_tlb_types[] = { - "Indeterminate", - "Parity", - "Multihit", - }; - - /* Copy the event structure and release the original */ - evt = *opal_evt; - opal_evt->in_use = 0; + struct machine_check_event evt; + + if (!get_mce_event(&evt, MCE_EVENT_RELEASE)) + return 0; /* Print things out */ - if (evt.version != OpalMCE_V1) { + if (evt.version != MCE_V1) { pr_err("Machine Check Exception, Unknown event version %d !\n", evt.version); return 0; } - switch(evt.severity) { - case OpalMCE_SEV_NO_ERROR: - level = KERN_INFO; - sevstr = "Harmless"; - break; - case OpalMCE_SEV_WARNING: - level = KERN_WARNING; - sevstr = ""; - break; - case OpalMCE_SEV_ERROR_SYNC: - level = KERN_ERR; - sevstr = "Severe"; - break; - case OpalMCE_SEV_FATAL: - default: - level = KERN_ERR; - sevstr = "Fatal"; - break; - } + machine_check_print_event_info(&evt); - printk("%s%s Machine check interrupt [%s]\n", level, sevstr, - evt.disposition == OpalMCE_DISPOSITION_RECOVERED ? - "Recovered" : "[Not recovered"); - printk("%s Initiator: %s\n", level, - evt.initiator == OpalMCE_INITIATOR_CPU ? "CPU" : "Unknown"); - switch(evt.error_type) { - case OpalMCE_ERROR_TYPE_UE: - subtype = evt.u.ue_error.ue_error_type < - ARRAY_SIZE(opal_mc_ue_types) ? - opal_mc_ue_types[evt.u.ue_error.ue_error_type] - : "Unknown"; - printk("%s Error type: UE [%s]\n", level, subtype); - if (evt.u.ue_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.ue_error.effective_address); - if (evt.u.ue_error.physical_address_provided) - printk("%s Physial address: %016llx\n", - level, evt.u.ue_error.physical_address); - break; - case OpalMCE_ERROR_TYPE_SLB: - subtype = evt.u.slb_error.slb_error_type < - ARRAY_SIZE(opal_mc_slb_types) ? - opal_mc_slb_types[evt.u.slb_error.slb_error_type] - : "Unknown"; - printk("%s Error type: SLB [%s]\n", level, subtype); - if (evt.u.slb_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.slb_error.effective_address); - break; - case OpalMCE_ERROR_TYPE_ERAT: - subtype = evt.u.erat_error.erat_error_type < - ARRAY_SIZE(opal_mc_erat_types) ? - opal_mc_erat_types[evt.u.erat_error.erat_error_type] - : "Unknown"; - printk("%s Error type: ERAT [%s]\n", level, subtype); - if (evt.u.erat_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.erat_error.effective_address); - break; - case OpalMCE_ERROR_TYPE_TLB: - subtype = evt.u.tlb_error.tlb_error_type < - ARRAY_SIZE(opal_mc_tlb_types) ? - opal_mc_tlb_types[evt.u.tlb_error.tlb_error_type] - : "Unknown"; - printk("%s Error type: TLB [%s]\n", level, subtype); - if (evt.u.tlb_error.effective_address_provided) - printk("%s Effective address: %016llx\n", - level, evt.u.tlb_error.effective_address); - break; - default: - case OpalMCE_ERROR_TYPE_UNKNOWN: - printk("%s Error type: Unknown\n", level); - break; - } - return evt.severity == OpalMCE_SEV_FATAL ? 0 : 1; + if (opal_recover_mce(regs, &evt)) + return 1; + return 0; } static irqreturn_t opal_interrupt(int irq, void *data) @@ -451,10 +483,25 @@ subsys_initcall(opal_init); void opal_shutdown(void) { unsigned int i; + long rc = OPAL_BUSY; + /* First free interrupts, which will also mask them */ for (i = 0; i < opal_irq_count; i++) { if (opal_irqs[i]) free_irq(opal_irqs[i], NULL); opal_irqs[i] = 0; } + + /* + * Then sync with OPAL which ensure anything that can + * potentially write to our memory has completed such + * as an ongoing dump retrieval + */ + while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { + rc = opal_sync_host_reboot(); + if (rc == OPAL_BUSY) + opal_poll_events(NULL); + else + mdelay(10); + } } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 2c6d173..7d6dcc6 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -460,7 +460,7 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev return; pe = &phb->ioda.pe_array[pdn->pe_number]; - set_iommu_table_base(&pdev->dev, &pe->tce32_table); + set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table); } static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) @@ -468,7 +468,7 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus) struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { - set_iommu_table_base(&dev->dev, &pe->tce32_table); + set_iommu_table_base_and_group(&dev->dev, &pe->tce32_table); if (dev->subordinate) pnv_ioda_setup_bus_dma(pe, dev->subordinate); } @@ -644,7 +644,7 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb, iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); if (pe->pdev) - set_iommu_table_base(&pe->pdev->dev, tbl); + set_iommu_table_base_and_group(&pe->pdev->dev, tbl); else pnv_ioda_setup_bus_dma(pe, pe->pbus); @@ -723,7 +723,7 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, iommu_register_group(tbl, pci_domain_nr(pe->pbus), pe->pe_number); if (pe->pdev) - set_iommu_table_base(&pe->pdev->dev, tbl); + set_iommu_table_base_and_group(&pe->pdev->dev, tbl); else pnv_ioda_setup_bus_dma(pe, pe->pbus); @@ -1144,7 +1144,7 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, { struct pci_controller *hose; struct pnv_phb *phb; - unsigned long size, m32map_off, iomap_off, pemap_off; + unsigned long size, m32map_off, pemap_off, iomap_off = 0; const __be64 *prop64; const __be32 *prop32; int len; @@ -1231,7 +1231,6 @@ void __init pnv_pci_init_ioda_phb(struct device_node *np, size = _ALIGN_UP(phb->ioda.total_pe / 8, sizeof(unsigned long)); m32map_off = size; size += phb->ioda.total_pe * sizeof(phb->ioda.m32_segmap[0]); - iomap_off = size; if (phb->type == PNV_PHB_IODA1) { iomap_off = size; size += phb->ioda.total_pe * sizeof(phb->ioda.io_segmap[0]); diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c index f8b4bd8..e3807d6 100644 --- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c +++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c @@ -92,7 +92,7 @@ static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb, pci_domain_nr(phb->hose->bus), phb->opal_id); } - set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table); + set_iommu_table_base_and_group(&pdev->dev, &phb->p5ioc2.iommu_table); } static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id, diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index 4eb33a9..b555ebc 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -124,77 +124,157 @@ static void pnv_teardown_msi_irqs(struct pci_dev *pdev) } #endif /* CONFIG_PCI_MSI */ -static void pnv_pci_dump_p7ioc_diag_data(struct pnv_phb *phb) +static void pnv_pci_dump_p7ioc_diag_data(struct pci_controller *hose, + struct OpalIoPhbErrorCommon *common) { - struct OpalIoP7IOCPhbErrorData *data = &phb->diag.p7ioc; + struct OpalIoP7IOCPhbErrorData *data; int i; - pr_info("PHB %d diagnostic data:\n", phb->hose->global_number); - - pr_info(" brdgCtl = 0x%08x\n", data->brdgCtl); - - pr_info(" portStatusReg = 0x%08x\n", data->portStatusReg); - pr_info(" rootCmplxStatus = 0x%08x\n", data->rootCmplxStatus); - pr_info(" busAgentStatus = 0x%08x\n", data->busAgentStatus); - - pr_info(" deviceStatus = 0x%08x\n", data->deviceStatus); - pr_info(" slotStatus = 0x%08x\n", data->slotStatus); - pr_info(" linkStatus = 0x%08x\n", data->linkStatus); - pr_info(" devCmdStatus = 0x%08x\n", data->devCmdStatus); - pr_info(" devSecStatus = 0x%08x\n", data->devSecStatus); - - pr_info(" rootErrorStatus = 0x%08x\n", data->rootErrorStatus); - pr_info(" uncorrErrorStatus = 0x%08x\n", data->uncorrErrorStatus); - pr_info(" corrErrorStatus = 0x%08x\n", data->corrErrorStatus); - pr_info(" tlpHdr1 = 0x%08x\n", data->tlpHdr1); - pr_info(" tlpHdr2 = 0x%08x\n", data->tlpHdr2); - pr_info(" tlpHdr3 = 0x%08x\n", data->tlpHdr3); - pr_info(" tlpHdr4 = 0x%08x\n", data->tlpHdr4); - pr_info(" sourceId = 0x%08x\n", data->sourceId); - - pr_info(" errorClass = 0x%016llx\n", data->errorClass); - pr_info(" correlator = 0x%016llx\n", data->correlator); - - pr_info(" p7iocPlssr = 0x%016llx\n", data->p7iocPlssr); - pr_info(" p7iocCsr = 0x%016llx\n", data->p7iocCsr); - pr_info(" lemFir = 0x%016llx\n", data->lemFir); - pr_info(" lemErrorMask = 0x%016llx\n", data->lemErrorMask); - pr_info(" lemWOF = 0x%016llx\n", data->lemWOF); - pr_info(" phbErrorStatus = 0x%016llx\n", data->phbErrorStatus); - pr_info(" phbFirstErrorStatus = 0x%016llx\n", data->phbFirstErrorStatus); - pr_info(" phbErrorLog0 = 0x%016llx\n", data->phbErrorLog0); - pr_info(" phbErrorLog1 = 0x%016llx\n", data->phbErrorLog1); - pr_info(" mmioErrorStatus = 0x%016llx\n", data->mmioErrorStatus); - pr_info(" mmioFirstErrorStatus = 0x%016llx\n", data->mmioFirstErrorStatus); - pr_info(" mmioErrorLog0 = 0x%016llx\n", data->mmioErrorLog0); - pr_info(" mmioErrorLog1 = 0x%016llx\n", data->mmioErrorLog1); - pr_info(" dma0ErrorStatus = 0x%016llx\n", data->dma0ErrorStatus); - pr_info(" dma0FirstErrorStatus = 0x%016llx\n", data->dma0FirstErrorStatus); - pr_info(" dma0ErrorLog0 = 0x%016llx\n", data->dma0ErrorLog0); - pr_info(" dma0ErrorLog1 = 0x%016llx\n", data->dma0ErrorLog1); - pr_info(" dma1ErrorStatus = 0x%016llx\n", data->dma1ErrorStatus); - pr_info(" dma1FirstErrorStatus = 0x%016llx\n", data->dma1FirstErrorStatus); - pr_info(" dma1ErrorLog0 = 0x%016llx\n", data->dma1ErrorLog0); - pr_info(" dma1ErrorLog1 = 0x%016llx\n", data->dma1ErrorLog1); + data = (struct OpalIoP7IOCPhbErrorData *)common; + pr_info("P7IOC PHB#%d Diag-data (Version: %d)\n\n", + hose->global_number, common->version); + + pr_info(" brdgCtl: %08x\n", data->brdgCtl); + + pr_info(" portStatusReg: %08x\n", data->portStatusReg); + pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); + pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); + + pr_info(" deviceStatus: %08x\n", data->deviceStatus); + pr_info(" slotStatus: %08x\n", data->slotStatus); + pr_info(" linkStatus: %08x\n", data->linkStatus); + pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); + pr_info(" devSecStatus: %08x\n", data->devSecStatus); + + pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); + pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); + pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); + pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); + pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); + pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); + pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); + pr_info(" sourceId: %08x\n", data->sourceId); + pr_info(" errorClass: %016llx\n", data->errorClass); + pr_info(" correlator: %016llx\n", data->correlator); + pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr); + pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr); + pr_info(" lemFir: %016llx\n", data->lemFir); + pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); + pr_info(" lemWOF: %016llx\n", data->lemWOF); + pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); + pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); + pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); + pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); + pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); + pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); + pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); + pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); + pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); + pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); + pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); + pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); + pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); + pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); + pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); + pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) { if ((data->pestA[i] >> 63) == 0 && (data->pestB[i] >> 63) == 0) continue; - pr_info(" PE[%3d] PESTA = 0x%016llx\n", i, data->pestA[i]); - pr_info(" PESTB = 0x%016llx\n", data->pestB[i]); + + pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); + pr_info(" PESTB: %016llx\n", data->pestB[i]); + } +} + +static void pnv_pci_dump_phb3_diag_data(struct pci_controller *hose, + struct OpalIoPhbErrorCommon *common) +{ + struct OpalIoPhb3ErrorData *data; + int i; + + data = (struct OpalIoPhb3ErrorData*)common; + pr_info("PHB3 PHB#%d Diag-data (Version: %d)\n\n", + hose->global_number, common->version); + + pr_info(" brdgCtl: %08x\n", data->brdgCtl); + + pr_info(" portStatusReg: %08x\n", data->portStatusReg); + pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus); + pr_info(" busAgentStatus: %08x\n", data->busAgentStatus); + + pr_info(" deviceStatus: %08x\n", data->deviceStatus); + pr_info(" slotStatus: %08x\n", data->slotStatus); + pr_info(" linkStatus: %08x\n", data->linkStatus); + pr_info(" devCmdStatus: %08x\n", data->devCmdStatus); + pr_info(" devSecStatus: %08x\n", data->devSecStatus); + + pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus); + pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus); + pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus); + pr_info(" tlpHdr1: %08x\n", data->tlpHdr1); + pr_info(" tlpHdr2: %08x\n", data->tlpHdr2); + pr_info(" tlpHdr3: %08x\n", data->tlpHdr3); + pr_info(" tlpHdr4: %08x\n", data->tlpHdr4); + pr_info(" sourceId: %08x\n", data->sourceId); + pr_info(" errorClass: %016llx\n", data->errorClass); + pr_info(" correlator: %016llx\n", data->correlator); + + pr_info(" nFir: %016llx\n", data->nFir); + pr_info(" nFirMask: %016llx\n", data->nFirMask); + pr_info(" nFirWOF: %016llx\n", data->nFirWOF); + pr_info(" PhbPlssr: %016llx\n", data->phbPlssr); + pr_info(" PhbCsr: %016llx\n", data->phbCsr); + pr_info(" lemFir: %016llx\n", data->lemFir); + pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask); + pr_info(" lemWOF: %016llx\n", data->lemWOF); + pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus); + pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus); + pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0); + pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1); + pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus); + pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus); + pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0); + pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1); + pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus); + pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus); + pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0); + pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1); + pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus); + pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus); + pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0); + pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1); + + for (i = 0; i < OPAL_PHB3_NUM_PEST_REGS; i++) { + if ((data->pestA[i] >> 63) == 0 && + (data->pestB[i] >> 63) == 0) + continue; + + pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]); + pr_info(" PESTB: %016llx\n", data->pestB[i]); } } -static void pnv_pci_dump_phb_diag_data(struct pnv_phb *phb) +void pnv_pci_dump_phb_diag_data(struct pci_controller *hose, + unsigned char *log_buff) { - switch(phb->model) { - case PNV_PHB_MODEL_P7IOC: - pnv_pci_dump_p7ioc_diag_data(phb); + struct OpalIoPhbErrorCommon *common; + + if (!hose || !log_buff) + return; + + common = (struct OpalIoPhbErrorCommon *)log_buff; + switch (common->ioType) { + case OPAL_PHB_ERROR_DATA_TYPE_P7IOC: + pnv_pci_dump_p7ioc_diag_data(hose, common); + break; + case OPAL_PHB_ERROR_DATA_TYPE_PHB3: + pnv_pci_dump_phb3_diag_data(hose, common); break; default: - pr_warning("PCI %d: Can't decode this PHB diag data\n", - phb->hose->global_number); + pr_warn("%s: Unrecognized ioType %d\n", + __func__, common->ioType); } } @@ -222,7 +302,7 @@ static void pnv_pci_handle_eeh_config(struct pnv_phb *phb, u32 pe_no) * with the normal errors generated when probing empty slots */ if (has_diag) - pnv_pci_dump_phb_diag_data(phb); + pnv_pci_dump_phb_diag_data(phb->hose, phb->diag.blob); else pr_warning("PCI %d: No diag data available\n", phb->hose->global_number); @@ -484,7 +564,8 @@ void pnv_pci_setup_iommu_table(struct iommu_table *tbl, { tbl->it_blocksize = 16; tbl->it_base = (unsigned long)tce_mem; - tbl->it_offset = dma_offset >> IOMMU_PAGE_SHIFT; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; + tbl->it_offset = dma_offset >> tbl->it_page_shift; tbl->it_index = 0; tbl->it_size = tce_size >> 3; tbl->it_busno = 0; @@ -536,7 +617,7 @@ static void pnv_pci_dma_fallback_setup(struct pci_controller *hose, pdn->iommu_table = pnv_pci_setup_bml_iommu(hose); if (!pdn->iommu_table) return; - set_iommu_table_base(&pdev->dev, pdn->iommu_table); + set_iommu_table_base_and_group(&pdev->dev, pdn->iommu_table); } static void pnv_pci_dma_dev_setup(struct pci_dev *pdev) @@ -657,3 +738,32 @@ void __init pnv_pci_init(void) ppc_md.teardown_msi_irqs = pnv_teardown_msi_irqs; #endif } + +static int tce_iommu_bus_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + + switch (action) { + case BUS_NOTIFY_ADD_DEVICE: + return iommu_add_device(dev); + case BUS_NOTIFY_DEL_DEVICE: + if (dev->iommu_group) + iommu_del_device(dev); + return 0; + default: + return 0; + } +} + +static struct notifier_block tce_iommu_bus_nb = { + .notifier_call = tce_iommu_bus_notifier, +}; + +static int __init tce_iommu_bus_notifier_init(void) +{ + bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb); + return 0; +} + +subsys_initcall_sync(tce_iommu_bus_notifier_init); diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 1ed8d5f..13f1942 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -176,6 +176,7 @@ struct pnv_phb { union { unsigned char blob[PNV_PCI_DIAG_BUF_SIZE]; struct OpalIoP7IOCPhbErrorData p7ioc; + struct OpalIoPhb3ErrorData phb3; struct OpalIoP7IOCErrorData hub_diag; } diag; @@ -186,6 +187,8 @@ extern struct pci_ops pnv_pci_ops; extern struct pnv_eeh_ops ioda_eeh_ops; #endif +void pnv_pci_dump_phb_diag_data(struct pci_controller *hose, + unsigned char *log_buff); int pnv_pci_cfg_read(struct device_node *dn, int where, int size, u32 *val); int pnv_pci_cfg_write(struct device_node *dn, diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 19884b2..21166f6 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -26,6 +26,7 @@ #include <linux/of_fdt.h> #include <linux/interrupt.h> #include <linux/bug.h> +#include <linux/cpuidle.h> #include <asm/machdep.h> #include <asm/firmware.h> @@ -145,8 +146,10 @@ static void pnv_shutdown(void) /* Let the PCI code clear up IODA tables */ pnv_pci_shutdown(); - /* And unregister all OPAL interrupts so they don't fire - * up while we kexec + /* + * Stop OPAL activity: Unregister all OPAL interrupts so they + * don't fire up while we kexec and make sure all potentially + * DMA'ing ops are complete (such as dump retrieval). */ opal_shutdown(); } @@ -214,6 +217,16 @@ static int __init pnv_probe(void) return 1; } +void powernv_idle(void) +{ + /* Hook to cpuidle framework if available, else + * call on default platform idle code + */ + if (cpuidle_idle_call()) { + power7_idle(); + } +} + define_machine(powernv) { .name = "PowerNV", .probe = pnv_probe, @@ -223,7 +236,7 @@ define_machine(powernv) { .show_cpuinfo = pnv_show_cpuinfo, .progress = pnv_progress, .machine_shutdown = pnv_shutdown, - .power_save = power7_idle, + .power_save = powernv_idle, .calibrate_decr = generic_calibrate_decr, #ifdef CONFIG_KEXEC .kexec_cpu_down = pnv_kexec_cpu_down, diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c index e17fa14..a0bca05 100644 --- a/arch/powerpc/platforms/ps3/spu.c +++ b/arch/powerpc/platforms/ps3/spu.c @@ -143,7 +143,7 @@ static void _dump_areas(unsigned int spe_id, unsigned long priv2, pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow); } -inline u64 ps3_get_spe_id(void *arg) +u64 ps3_get_spe_id(void *arg) { return spu_pdata(arg)->spe_id; } diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 62b4f80..37300f6 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -34,7 +34,7 @@ config PPC_SPLPAR config PSERIES_MSI bool - depends on PCI_MSI && EEH + depends on PCI_MSI && PPC_PSERIES && EEH default y config PSERIES_ENERGY @@ -119,12 +119,3 @@ config DTL which are accessible through a debugfs file. Say N if you are unsure. - -config PSERIES_IDLE - bool "Cpuidle driver for pSeries platforms" - depends on CPU_IDLE - depends on PPC_PSERIES - default y - help - Select this option to enable processor idle state management - through cpuidle subsystem. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index fbccac9..0348079 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o -obj-$(CONFIG_PSERIES_IDLE) += processor_idle.o obj-$(CONFIG_LPARCFG) += lparcfg.o ifeq ($(CONFIG_PPC_PSERIES),y) diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index 1e561be..2d8bf15 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -25,7 +25,6 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/gfp.h> -#include <linux/init.h> #include <linux/kthread.h> #include <linux/module.h> #include <linux/oom.h> diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index 5db66f1..7d61498 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -20,7 +20,6 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/init.h> #include <linux/slab.h> #include <linux/debugfs.h> #include <linux/spinlock.h> diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index ccb633e..9ef3cc8 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -689,7 +689,9 @@ static struct eeh_ops pseries_eeh_ops = { .get_log = pseries_eeh_get_log, .configure_bridge = pseries_eeh_configure_bridge, .read_config = pseries_eeh_read_config, - .write_config = pseries_eeh_write_config + .write_config = pseries_eeh_write_config, + .next_error = NULL, + .restore_config = NULL }; /** diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index f253361..33b552f 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -486,9 +486,10 @@ static void iommu_table_setparms(struct pci_controller *phb, memset((void *)tbl->it_base, 0, *sizep); tbl->it_busno = phb->bus->number; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; /* Units of tce entries */ - tbl->it_offset = phb->dma_window_base_cur >> IOMMU_PAGE_SHIFT; + tbl->it_offset = phb->dma_window_base_cur >> tbl->it_page_shift; /* Test if we are going over 2GB of DMA space */ if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { @@ -499,7 +500,7 @@ static void iommu_table_setparms(struct pci_controller *phb, phb->dma_window_base_cur += phb->dma_window_size; /* Set the tce table size - measured in entries */ - tbl->it_size = phb->dma_window_size >> IOMMU_PAGE_SHIFT; + tbl->it_size = phb->dma_window_size >> tbl->it_page_shift; tbl->it_index = 0; tbl->it_blocksize = 16; @@ -537,11 +538,12 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size); tbl->it_busno = phb->bus->number; + tbl->it_page_shift = IOMMU_PAGE_SHIFT_4K; tbl->it_base = 0; tbl->it_blocksize = 16; tbl->it_type = TCE_PCI; - tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; - tbl->it_size = size >> IOMMU_PAGE_SHIFT; + tbl->it_offset = offset >> tbl->it_page_shift; + tbl->it_size = size >> tbl->it_page_shift; } static void pci_dma_bus_setup_pSeries(struct pci_bus *bus) @@ -687,7 +689,8 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) iommu_table_setparms(phb, dn, tbl); PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node); iommu_register_group(tbl, pci_domain_nr(phb->bus), 0); - set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table); + set_iommu_table_base_and_group(&dev->dev, + PCI_DN(dn)->iommu_table); return; } @@ -699,7 +702,8 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) dn = dn->parent; if (dn && PCI_DN(dn)) - set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table); + set_iommu_table_base_and_group(&dev->dev, + PCI_DN(dn)->iommu_table); else printk(KERN_WARNING "iommu: Device %s has no iommu table\n", pci_name(dev)); @@ -717,21 +721,6 @@ static int __init disable_ddw_setup(char *str) early_param("disable_ddw", disable_ddw_setup); -static inline void __remove_ddw(struct device_node *np, const u32 *ddw_avail, u64 liobn) -{ - int ret; - - ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn); - if (ret) - pr_warning("%s: failed to remove DMA window: rtas returned " - "%d to ibm,remove-pe-dma-window(%x) %llx\n", - np->full_name, ret, ddw_avail[2], liobn); - else - pr_debug("%s: successfully removed DMA window: rtas returned " - "%d to ibm,remove-pe-dma-window(%x) %llx\n", - np->full_name, ret, ddw_avail[2], liobn); -} - static void remove_ddw(struct device_node *np) { struct dynamic_dma_window_prop *dwp; @@ -761,7 +750,15 @@ static void remove_ddw(struct device_node *np) pr_debug("%s successfully cleared tces in window.\n", np->full_name); - __remove_ddw(np, ddw_avail, liobn); + ret = rtas_call(ddw_avail[2], 1, 1, NULL, liobn); + if (ret) + pr_warning("%s: failed to remove direct window: rtas returned " + "%d to ibm,remove-pe-dma-window(%x) %llx\n", + np->full_name, ret, ddw_avail[2], liobn); + else + pr_debug("%s: successfully removed direct window: rtas returned " + "%d to ibm,remove-pe-dma-window(%x) %llx\n", + np->full_name, ret, ddw_avail[2], liobn); delprop: ret = of_remove_property(np, win64); @@ -790,68 +787,33 @@ static u64 find_existing_ddw(struct device_node *pdn) return dma_addr; } -static void __restore_default_window(struct eeh_dev *edev, - u32 ddw_restore_token) -{ - u32 cfg_addr; - u64 buid; - int ret; - - /* - * Get the config address and phb buid of the PE window. - * Rely on eeh to retrieve this for us. - * Retrieve them from the pci device, not the node with the - * dma-window property - */ - cfg_addr = edev->config_addr; - if (edev->pe_config_addr) - cfg_addr = edev->pe_config_addr; - buid = edev->phb->buid; - - do { - ret = rtas_call(ddw_restore_token, 3, 1, NULL, cfg_addr, - BUID_HI(buid), BUID_LO(buid)); - } while (rtas_busy_delay(ret)); - pr_info("ibm,reset-pe-dma-windows(%x) %x %x %x returned %d\n", - ddw_restore_token, cfg_addr, BUID_HI(buid), BUID_LO(buid), ret); -} - static int find_existing_ddw_windows(void) { + int len; struct device_node *pdn; + struct direct_window *window; const struct dynamic_dma_window_prop *direct64; - const u32 *ddw_extensions; if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; for_each_node_with_property(pdn, DIRECT64_PROPNAME) { - direct64 = of_get_property(pdn, DIRECT64_PROPNAME, NULL); + direct64 = of_get_property(pdn, DIRECT64_PROPNAME, &len); if (!direct64) continue; - /* - * We need to ensure the IOMMU table is active when we - * return from the IOMMU setup so that the common code - * can clear the table or find the holes. To that end, - * first, remove any existing DDW configuration. - */ - remove_ddw(pdn); + window = kzalloc(sizeof(*window), GFP_KERNEL); + if (!window || len < sizeof(struct dynamic_dma_window_prop)) { + kfree(window); + remove_ddw(pdn); + continue; + } - /* - * Second, if we are running on a new enough level of - * firmware where the restore API is present, use it to - * restore the 32-bit window, which was removed in - * create_ddw. - * If the API is not present, then create_ddw couldn't - * have removed the 32-bit window in the first place, so - * removing the DDW configuration should be sufficient. - */ - ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", - NULL); - if (ddw_extensions && ddw_extensions[0] > 0) - __restore_default_window(of_node_to_eeh_dev(pdn), - ddw_extensions[1]); + window->device = pdn; + window->prop = direct64; + spin_lock(&direct_window_list_lock); + list_add(&window->list, &direct_window_list); + spin_unlock(&direct_window_list_lock); } return 0; @@ -921,12 +883,6 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail, return ret; } -static void restore_default_window(struct pci_dev *dev, - u32 ddw_restore_token) -{ - __restore_default_window(pci_dev_to_eeh_dev(dev), ddw_restore_token); -} - struct failed_ddw_pdn { struct device_node *pdn; struct list_head list; @@ -954,13 +910,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) u64 dma_addr, max_addr; struct device_node *dn; const u32 *uninitialized_var(ddw_avail); - const u32 *uninitialized_var(ddw_extensions); - u32 ddw_restore_token = 0; struct direct_window *window; struct property *win64; struct dynamic_dma_window_prop *ddwprop; - const void *dma_window = NULL; - unsigned long liobn, offset, size; struct failed_ddw_pdn *fpdn; mutex_lock(&direct_window_init_mutex); @@ -991,42 +943,9 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) */ ddw_avail = of_get_property(pdn, "ibm,ddw-applicable", &len); if (!ddw_avail || len < 3 * sizeof(u32)) - goto out_unlock; - - /* - * the extensions property is only required to exist in certain - * levels of firmware and later - * the ibm,ddw-extensions property is a list with the first - * element containing the number of extensions and each - * subsequent entry is a value corresponding to that extension - */ - ddw_extensions = of_get_property(pdn, "ibm,ddw-extensions", &len); - if (ddw_extensions) { - /* - * each new defined extension length should be added to - * the top of the switch so the "earlier" entries also - * get picked up - */ - switch (ddw_extensions[0]) { - /* ibm,reset-pe-dma-windows */ - case 1: - ddw_restore_token = ddw_extensions[1]; - break; - } - } - - /* - * Only remove the existing DMA window if we can restore back to - * the default state. Removing the existing window maximizes the - * resources available to firmware for dynamic window creation. - */ - if (ddw_restore_token) { - dma_window = of_get_property(pdn, "ibm,dma-window", NULL); - of_parse_dma_window(pdn, dma_window, &liobn, &offset, &size); - __remove_ddw(pdn, ddw_avail, liobn); - } + goto out_failed; - /* + /* * Query if there is a second window of size to map the * whole partition. Query returns number of windows, largest * block assigned to PE (partition endpoint), and two bitmasks @@ -1035,7 +954,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) dn = pci_device_to_OF_node(dev); ret = query_ddw(dev, ddw_avail, &query); if (ret != 0) - goto out_restore_window; + goto out_failed; if (query.windows_available == 0) { /* @@ -1044,7 +963,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) * trading in for a larger page size. */ dev_dbg(&dev->dev, "no free dynamic windows"); - goto out_restore_window; + goto out_failed; } if (be32_to_cpu(query.page_size) & 4) { page_shift = 24; /* 16MB */ @@ -1055,7 +974,7 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) } else { dev_dbg(&dev->dev, "no supported direct page size in mask %x", query.page_size); - goto out_restore_window; + goto out_failed; } /* verify the window * number of ptes will map the partition */ /* check largest block * page size > max memory hotplug addr */ @@ -1064,14 +983,14 @@ static u64 enable_ddw(struct pci_dev *dev, struct device_node *pdn) dev_dbg(&dev->dev, "can't map partiton max 0x%llx with %u " "%llu-sized pages\n", max_addr, query.largest_available_block, 1ULL << page_shift); - goto out_restore_window; + goto out_failed; } len = order_base_2(max_addr); win64 = kzalloc(sizeof(struct property), GFP_KERNEL); if (!win64) { dev_info(&dev->dev, "couldn't allocate property for 64bit dma window\n"); - goto out_restore_window; + goto out_failed; } win64->name = kstrdup(DIRECT64_PROPNAME, GFP_KERNEL); win64->value = ddwprop = kmalloc(sizeof(*ddwprop), GFP_KERNEL); @@ -1133,9 +1052,7 @@ out_free_prop: kfree(win64->value); kfree(win64); -out_restore_window: - if (ddw_restore_token) - restore_default_window(dev, ddw_restore_token); +out_failed: fpdn = kzalloc(sizeof(*fpdn), GFP_KERNEL); if (!fpdn) @@ -1193,7 +1110,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) pr_debug(" found DMA window, table: %p\n", pci->iommu_table); } - set_iommu_table_base(&dev->dev, pci->iommu_table); + set_iommu_table_base_and_group(&dev->dev, pci->iommu_table); } static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask) diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 4fca3de..b02af9e 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -92,7 +92,7 @@ void vpa_init(int cpu) * PAPR says this feature is SLB-Buffer but firmware never * reports that. All SPLPAR support SLB shadow buffer. */ - addr = __pa(&slb_shadow[cpu]); + addr = __pa(paca[cpu].slb_shadow_ptr); if (firmware_has_feature(FW_FEATURE_SPLPAR)) { ret = register_slb_shadow(hwcpu, addr); if (ret) @@ -153,7 +153,8 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, /* Make pHyp happy */ if ((rflags & _PAGE_NO_CACHE) && !(rflags & _PAGE_WRITETHRU)) - hpte_r &= ~_PAGE_COHERENT; + hpte_r &= ~HPTE_R_M; + if (firmware_has_feature(FW_FEATURE_XCMO) && !(hpte_r & HPTE_R_N)) flags |= H_COALESCE_CAND; diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c deleted file mode 100644 index a166e38..0000000 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * processor_idle - idle state cpuidle driver. - * Adapted from drivers/idle/intel_idle.c and - * drivers/acpi/processor_idle.c - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/moduleparam.h> -#include <linux/cpuidle.h> -#include <linux/cpu.h> -#include <linux/notifier.h> - -#include <asm/paca.h> -#include <asm/reg.h> -#include <asm/machdep.h> -#include <asm/firmware.h> -#include <asm/runlatch.h> -#include <asm/plpar_wrappers.h> - -struct cpuidle_driver pseries_idle_driver = { - .name = "pseries_idle", - .owner = THIS_MODULE, -}; - -#define MAX_IDLE_STATE_COUNT 2 - -static int max_idle_state = MAX_IDLE_STATE_COUNT - 1; -static struct cpuidle_device __percpu *pseries_cpuidle_devices; -static struct cpuidle_state *cpuidle_state_table; - -static inline void idle_loop_prolog(unsigned long *in_purr) -{ - *in_purr = mfspr(SPRN_PURR); - /* - * Indicate to the HV that we are idle. Now would be - * a good time to find other work to dispatch. - */ - get_lppaca()->idle = 1; -} - -static inline void idle_loop_epilog(unsigned long in_purr) -{ - u64 wait_cycles; - - wait_cycles = be64_to_cpu(get_lppaca()->wait_state_cycles); - wait_cycles += mfspr(SPRN_PURR) - in_purr; - get_lppaca()->wait_state_cycles = cpu_to_be64(wait_cycles); - get_lppaca()->idle = 0; -} - -static int snooze_loop(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long in_purr; - int cpu = dev->cpu; - - idle_loop_prolog(&in_purr); - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - - while ((!need_resched()) && cpu_online(cpu)) { - ppc64_runlatch_off(); - HMT_low(); - HMT_very_low(); - } - - HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb(); - - idle_loop_epilog(in_purr); - - return index; -} - -static void check_and_cede_processor(void) -{ - /* - * Ensure our interrupt state is properly tracked, - * also checks if no interrupt has occurred while we - * were soft-disabled - */ - if (prep_irq_for_idle()) { - cede_processor(); -#ifdef CONFIG_TRACE_IRQFLAGS - /* Ensure that H_CEDE returns with IRQs on */ - if (WARN_ON(!(mfmsr() & MSR_EE))) - __hard_irq_enable(); -#endif - } -} - -static int dedicated_cede_loop(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long in_purr; - - idle_loop_prolog(&in_purr); - get_lppaca()->donate_dedicated_cpu = 1; - - ppc64_runlatch_off(); - HMT_medium(); - check_and_cede_processor(); - - get_lppaca()->donate_dedicated_cpu = 0; - - idle_loop_epilog(in_purr); - - return index; -} - -static int shared_cede_loop(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long in_purr; - - idle_loop_prolog(&in_purr); - - /* - * Yield the processor to the hypervisor. We return if - * an external interrupt occurs (which are driven prior - * to returning here) or if a prod occurs from another - * processor. When returning here, external interrupts - * are enabled. - */ - check_and_cede_processor(); - - idle_loop_epilog(in_purr); - - return index; -} - -/* - * States for dedicated partition case. - */ -static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = { - { /* Snooze */ - .name = "snooze", - .desc = "snooze", - .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 0, - .target_residency = 0, - .enter = &snooze_loop }, - { /* CEDE */ - .name = "CEDE", - .desc = "CEDE", - .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 10, - .target_residency = 100, - .enter = &dedicated_cede_loop }, -}; - -/* - * States for shared partition case. - */ -static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = { - { /* Shared Cede */ - .name = "Shared Cede", - .desc = "Shared Cede", - .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 0, - .target_residency = 0, - .enter = &shared_cede_loop }, -}; - -void update_smt_snooze_delay(int cpu, int residency) -{ - struct cpuidle_driver *drv = cpuidle_get_driver(); - struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu); - - if (cpuidle_state_table != dedicated_states) - return; - - if (residency < 0) { - /* Disable the Nap state on that cpu */ - if (dev) - dev->states_usage[1].disable = 1; - } else - if (drv) - drv->states[1].target_residency = residency; -} - -static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n, - unsigned long action, void *hcpu) -{ - int hotcpu = (unsigned long)hcpu; - struct cpuidle_device *dev = - per_cpu_ptr(pseries_cpuidle_devices, hotcpu); - - if (dev && cpuidle_get_driver()) { - switch (action) { - case CPU_ONLINE: - case CPU_ONLINE_FROZEN: - cpuidle_pause_and_lock(); - cpuidle_enable_device(dev); - cpuidle_resume_and_unlock(); - break; - - case CPU_DEAD: - case CPU_DEAD_FROZEN: - cpuidle_pause_and_lock(); - cpuidle_disable_device(dev); - cpuidle_resume_and_unlock(); - break; - - default: - return NOTIFY_DONE; - } - } - return NOTIFY_OK; -} - -static struct notifier_block setup_hotplug_notifier = { - .notifier_call = pseries_cpuidle_add_cpu_notifier, -}; - -/* - * pseries_cpuidle_driver_init() - */ -static int pseries_cpuidle_driver_init(void) -{ - int idle_state; - struct cpuidle_driver *drv = &pseries_idle_driver; - - drv->state_count = 0; - - for (idle_state = 0; idle_state < MAX_IDLE_STATE_COUNT; ++idle_state) { - - if (idle_state > max_idle_state) - break; - - /* is the state not enabled? */ - if (cpuidle_state_table[idle_state].enter == NULL) - continue; - - drv->states[drv->state_count] = /* structure copy */ - cpuidle_state_table[idle_state]; - - drv->state_count += 1; - } - - return 0; -} - -/* pseries_idle_devices_uninit(void) - * unregister cpuidle devices and de-allocate memory - */ -static void pseries_idle_devices_uninit(void) -{ - int i; - struct cpuidle_device *dev; - - for_each_possible_cpu(i) { - dev = per_cpu_ptr(pseries_cpuidle_devices, i); - cpuidle_unregister_device(dev); - } - - free_percpu(pseries_cpuidle_devices); - return; -} - -/* pseries_idle_devices_init() - * allocate, initialize and register cpuidle device - */ -static int pseries_idle_devices_init(void) -{ - int i; - struct cpuidle_driver *drv = &pseries_idle_driver; - struct cpuidle_device *dev; - - pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device); - if (pseries_cpuidle_devices == NULL) - return -ENOMEM; - - for_each_possible_cpu(i) { - dev = per_cpu_ptr(pseries_cpuidle_devices, i); - dev->state_count = drv->state_count; - dev->cpu = i; - if (cpuidle_register_device(dev)) { - printk(KERN_DEBUG \ - "cpuidle_register_device %d failed!\n", i); - return -EIO; - } - } - - return 0; -} - -/* - * pseries_idle_probe() - * Choose state table for shared versus dedicated partition - */ -static int pseries_idle_probe(void) -{ - - if (!firmware_has_feature(FW_FEATURE_SPLPAR)) - return -ENODEV; - - if (cpuidle_disable != IDLE_NO_OVERRIDE) - return -ENODEV; - - if (max_idle_state == 0) { - printk(KERN_DEBUG "pseries processor idle disabled.\n"); - return -EPERM; - } - - if (lppaca_shared_proc(get_lppaca())) - cpuidle_state_table = shared_states; - else - cpuidle_state_table = dedicated_states; - - return 0; -} - -static int __init pseries_processor_idle_init(void) -{ - int retval; - - retval = pseries_idle_probe(); - if (retval) - return retval; - - pseries_cpuidle_driver_init(); - retval = cpuidle_register_driver(&pseries_idle_driver); - if (retval) { - printk(KERN_DEBUG "Registration of pseries driver failed.\n"); - return retval; - } - - retval = pseries_idle_devices_init(); - if (retval) { - pseries_idle_devices_uninit(); - cpuidle_unregister_driver(&pseries_idle_driver); - return retval; - } - - register_cpu_notifier(&setup_hotplug_notifier); - printk(KERN_DEBUG "pseries_idle_driver registered\n"); - - return 0; -} - -static void __exit pseries_processor_idle_exit(void) -{ - - unregister_cpu_notifier(&setup_hotplug_notifier); - pseries_idle_devices_uninit(); - cpuidle_unregister_driver(&pseries_idle_driver); - - return; -} - -module_init(pseries_processor_idle_init); -module_exit(pseries_processor_idle_exit); - -MODULE_AUTHOR("Deepthi Dharwar <deepthi@linux.vnet.ibm.com>"); -MODULE_DESCRIPTION("Cpuidle driver for POWER"); -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 6f76ae4..8e639d7 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -72,7 +72,7 @@ int CMO_PrPSP = -1; int CMO_SecPSP = -1; -unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT); +unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K); EXPORT_SYMBOL(CMO_PageSize); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -569,7 +569,7 @@ void pSeries_cmo_feature_init(void) { char *ptr, *key, *value, *end; int call_status; - int page_order = IOMMU_PAGE_SHIFT; + int page_order = IOMMU_PAGE_SHIFT_4K; pr_debug(" -> fw_cmo_feature_init()\n"); spin_lock(&rtas_data_buf_lock); diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c index 62cb527..9a15e5b 100644 --- a/arch/powerpc/platforms/wsp/wsp_pci.c +++ b/arch/powerpc/platforms/wsp/wsp_pci.c @@ -260,7 +260,7 @@ static int tce_build_wsp(struct iommu_table *tbl, long index, long npages, *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n", - tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT); + tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT_4K); uaddr += TCE_PAGE_SIZE; index++; @@ -381,8 +381,9 @@ static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb, /* Init bits and pieces */ tbl->table.it_blocksize = 16; - tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT; - tbl->table.it_size = size >> IOMMU_PAGE_SHIFT; + tbl->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; + tbl->table.it_offset = addr >> tbl->table.it_page_shift; + tbl->table.it_size = size >> tbl->table.it_page_shift; /* * It's already blank but we clear it anyway. @@ -449,8 +450,8 @@ static void wsp_pci_dma_dev_setup(struct pci_dev *pdev) if (table) { pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n", pci_name(pdev), - table->table.it_offset << IOMMU_PAGE_SHIFT, - (table->table.it_offset << IOMMU_PAGE_SHIFT) + table->table.it_offset << IOMMU_PAGE_SHIFT_4K, + (table->table.it_offset << IOMMU_PAGE_SHIFT_4K) + phb->dma32_region_size - 1); archdata->dma_data.iommu_table_base = &table->table; return; |
