diff options
Diffstat (limited to 'arch/powerpc/platforms')
33 files changed, 765 insertions, 327 deletions
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 9d8b28ef..5c72367 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -1,4 +1,6 @@ # # Makefile for the PowerPC 83xx linux kernel. # -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o pci.o +obj-y := misc.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c new file mode 100644 index 0000000..1455bce --- /dev/null +++ b/arch/powerpc/platforms/83xx/misc.c @@ -0,0 +1,55 @@ +/* + * misc setup functions for MPC83xx + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> + +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + +void mpc83xx_restart(char *cmd) +{ +#define RST_OFFSET 0x00000900 +#define RST_PROT_REG 0x00000018 +#define RST_CTRL_REG 0x0000001c + __be32 __iomem *reg; + + /* map reset register space */ + reg = ioremap(get_immrbase() + 0x900, 0xff); + + local_irq_disable(); + + /* enable software reset "RSTE" */ + out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); + + /* set software hard reset */ + out_be32(reg + (RST_CTRL_REG >> 2), 0x2); + for (;;) ; +} + +long __init mpc83xx_time_init(void) +{ +#define SPCR_OFFSET 0x00000110 +#define SPCR_TBEN 0x00400000 + __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); + __be32 tmp; + + tmp = in_be32(spcr); + out_be32(spcr, tmp | SPCR_TBEN); + + iounmap(spcr); + + return 0; +} diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 2098dd0..7c18b4c 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -24,22 +24,15 @@ #include <linux/delay.h> #include <linux/seq_file.h> #include <linux/root_dev.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> #include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> #include <asm/atomic.h> #include <asm/time.h> #include <asm/io.h> #include <asm/machdep.h> #include <asm/ipic.h> #include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc83xx.h> #include <asm/irq.h> -#include <mm/mmu_decl.h> #include <asm/prom.h> #include <asm/udbg.h> #include <sysdev/fsl_soc.h> @@ -52,8 +45,6 @@ unsigned long isa_mem_base = 0; #endif #ifdef CONFIG_PCI -extern int mpc83xx_pci2_busno; - static int mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { @@ -78,26 +69,14 @@ mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } - -static int -mpc83xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - if (mpc83xx_pci2_busno) - if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ +#endif /* CONFIG_PCI */ /* ************************************************************************ * * Setup the architecture * */ -static void __init -mpc834x_sys_setup_arch(void) +static void __init mpc834x_sys_setup_arch(void) { struct device_node *np; @@ -106,14 +85,14 @@ mpc834x_sys_setup_arch(void) np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { - unsigned int *fp = (int *) get_property(np, "clock-frequency", NULL); + unsigned int *fp = + (int *)get_property(np, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else loops_per_jiffy = 50000000 / HZ; of_node_put(np); } - #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); @@ -124,14 +103,13 @@ mpc834x_sys_setup_arch(void) #endif #ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; + ROOT_DEV = Root_NFS; #else - ROOT_DEV = Root_HDA1; + ROOT_DEV = Root_HDA1; #endif } -void __init -mpc834x_sys_init_IRQ(void) +void __init mpc834x_sys_init_IRQ(void) { u8 senses[8] = { 0, /* EXT 0 */ @@ -160,64 +138,27 @@ mpc834x_sys_init_IRQ(void) } #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) -extern ulong ds1374_get_rtc_time(void); -extern int ds1374_set_rtc_time(ulong); +extern ulong ds1374_get_rtc_time(void); +extern int ds1374_set_rtc_time(ulong); -static int __init -mpc834x_rtc_hookup(void) +static int __init mpc834x_rtc_hookup(void) { - struct timespec tv; + struct timespec tv; ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); + tv.tv_sec = (ppc_md.get_rtc_time) (); do_settimeofday(&tv); return 0; } + late_initcall(mpc834x_rtc_hookup); #endif -static void -mpc83xx_restart(char *cmd) -{ -#define RST_OFFSET 0x00000900 -#define RST_PROT_REG 0x00000018 -#define RST_CTRL_REG 0x0000001c - __be32 __iomem *reg; - - // map reset register space - reg = ioremap(get_immrbase() + 0x900, 0xff); - - local_irq_disable(); - - /* enable software reset "RSTE" */ - out_be32(reg + (RST_PROT_REG >> 2), 0x52535445); - - /* set software hard reset */ - out_be32(reg + (RST_CTRL_REG >> 2), 0x52535445); - for(;;); -} - -static long __init -mpc83xx_time_init(void) -{ -#define SPCR_OFFSET 0x00000110 -#define SPCR_TBEN 0x00400000 - __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); - __be32 tmp; - - tmp = in_be32(spcr); - out_be32(spcr, tmp|SPCR_TBEN); - - iounmap(spcr); - - return 0; -} -void __init -platform_init(void) +void __init platform_init(void) { /* setup the PowerPC module struct */ ppc_md.setup_arch = mpc834x_sys_setup_arch; @@ -239,5 +180,3 @@ platform_init(void) return; } - - diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.h b/arch/powerpc/platforms/83xx/mpc834x_sys.h index e4ca39f..fedecb7 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.h +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.h @@ -20,4 +20,4 @@ #define PIRQC MPC83xx_IRQ_EXT6 #define PIRQD MPC83xx_IRQ_EXT7 -#endif /* __MACH_MPC83XX_SYS_H__ */ +#endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index ce9e66a..01cae10 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -10,5 +10,8 @@ */ extern int add_bridge(struct device_node *dev); +extern int mpc83xx_exclude_device(u_char bus, u_char devfn); +extern void mpc83xx_restart(char *cmd); +extern long mpc83xx_time_init(void); -#endif /* __MPC83XX_H__ */ +#endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 469cdac..16f7d3b 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -36,7 +36,16 @@ int mpc83xx_pci2_busno; -#ifdef CONFIG_PCI +int mpc83xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + if (mpc83xx_pci2_busno) + if (bus == (mpc83xx_pci2_busno) && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + return PCIBIOS_SUCCESSFUL; +} + int __init add_bridge(struct device_node *dev) { int len; @@ -52,7 +61,7 @@ int __init add_bridge(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = (int *) get_property(dev, "bus-range", &len); + bus_range = (int *)get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); @@ -74,7 +83,7 @@ int __init add_bridge(struct device_node *dev) if ((rsrc.start & 0xfffff) == 0x8500) { setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304); } - /* PCI 2*/ + /* PCI 2 */ if ((rsrc.start & 0xfffff) == 0x8600) { setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384); primary = 0; @@ -84,10 +93,10 @@ int __init add_bridge(struct device_node *dev) printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%08lx. " "Firmware bus number: %d->%d\n", - rsrc.start, hose->first_busno, hose->last_busno); + rsrc.start, hose->first_busno, hose->last_busno); DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", - hose, hose->cfg_addr, hose->cfg_data); + hose, hose->cfg_addr, hose->cfg_data); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ @@ -95,5 +104,3 @@ int __init add_bridge(struct device_node *dev) return 0; } - -#endif diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index c5bc282..d3d0ff7 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -1,86 +1,30 @@ -config 85xx - bool - depends on E500 - default y - -config PPC_INDIRECT_PCI_BE - bool - depends on 85xx - default y - -menu "Freescale 85xx options" - depends on E500 +menu "Platform support" + depends on PPC_85xx choice prompt "Machine Type" - depends on 85xx default MPC8540_ADS config MPC8540_ADS bool "Freescale MPC8540 ADS" help - This option enables support for the MPC 8540 ADS evaluation board. - -config MPC8548_CDS - bool "Freescale MPC8548 CDS" - help - This option enablese support for the MPC8548 CDS evaluation board. - -config MPC8555_CDS - bool "Freescale MPC8555 CDS" - help - This option enablese support for the MPC8555 CDS evaluation board. - -config MPC8560_ADS - bool "Freescale MPC8560 ADS" - help - This option enables support for the MPC 8560 ADS evaluation board. - -config SBC8560 - bool "WindRiver PowerQUICC III SBC8560" - help - This option enables support for the WindRiver PowerQUICC III - SBC8560 board. - -config STX_GP3 - bool "Silicon Turnkey Express GP3" - help - This option enables support for the Silicon Turnkey Express GP3 - board. + This option enables support for the MPC 8540 ADS board endchoice -# It's often necessary to know the specific 85xx processor type. -# Fortunately, it is implied (so far) from the board type, so we -# don't need to ask more redundant questions. config MPC8540 bool - depends on MPC8540_ADS - default y - -config MPC8548 - bool - depends on MPC8548_CDS - default y + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8540_ADS -config MPC8555 - bool - depends on MPC8555_CDS - default y - -config MPC8560 +config PPC_INDIRECT_PCI_BE bool - depends on SBC8560 || MPC8560_ADS || STX_GP3 - default y - -config 85xx_PCI2 - bool "Supprt for 2nd PCI host controller" - depends on MPC8555_CDS + depends on PPC_85xx default y -config PPC_GEN550 +config MPIC bool - depends on MPC8540 || SBC8560 || MPC8555 default y endmenu diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 6407197..ffc4139 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -1 +1,5 @@ -# empty makefile so make clean works +# +# Makefile for the PowerPC 85xx linux kernel. +# +obj-$(CONFIG_PPC_85xx) += misc.o pci.o +obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o diff --git a/arch/powerpc/platforms/85xx/misc.c b/arch/powerpc/platforms/85xx/misc.c new file mode 100644 index 0000000..26c5e822 --- /dev/null +++ b/arch/powerpc/platforms/85xx/misc.c @@ -0,0 +1,31 @@ +/* + * MPC85xx generic code. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/irq.h> +#include <linux/module.h> +#include <asm/irq.h> + +extern void abort(void); + +void mpc85xx_restart(char *cmd) +{ + local_irq_disable(); + abort(); +} + +/* For now this is a pass through */ +phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) +{ + return addr; +}; + +EXPORT_SYMBOL(fixup_bigphys_addr); diff --git a/arch/powerpc/platforms/85xx/mpc8540_ads.h b/arch/powerpc/platforms/85xx/mpc8540_ads.h new file mode 100644 index 0000000..f770cad --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8540_ads.h @@ -0,0 +1,36 @@ +/* + * arch/ppc/platforms/85xx/mpc8540_ads.h + * + * MPC8540ADS board definitions + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * Copyright 2004 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC8540ADS_H__ +#define __MACH_MPC8540ADS_H__ + +#include <linux/config.h> +#include <linux/initrd.h> + +#define BOARD_CCSRBAR ((uint)0xe0000000) +#define BCSR_ADDR ((uint)0xf8000000) +#define BCSR_SIZE ((uint)(32 * 1024)) + +/* PCI interrupt controller */ +#define PIRQA MPC85xx_IRQ_EXT1 +#define PIRQB MPC85xx_IRQ_EXT2 +#define PIRQC MPC85xx_IRQ_EXT3 +#define PIRQD MPC85xx_IRQ_EXT4 + +/* Offset of CPM register space */ +#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) + +#endif /* __MACH_MPC8540ADS_H__ */ diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h new file mode 100644 index 0000000..b44db62 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -0,0 +1,18 @@ +/* + * arch/ppc/platforms/85xx/mpc85xx.h + * + * MPC85xx soc definitions/function decls + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +extern void mpc85xx_restart(char *); +extern int add_bridge(struct device_node *dev); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c new file mode 100644 index 0000000..b7821db --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -0,0 +1,244 @@ +/* + * MPC85xx setup and early boot code plus other random bits. + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2005 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpc85xx.h> +#include <asm/prom.h> +#include <asm/mpic.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <sysdev/fsl_soc.h> +#include "mpc85xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* + * Internal interrupts are all Level Sensitive, and Positive Polarity + * + * Note: Likely, this table and the following function should be + * obtained and derived from the OF Device Tree. + */ +static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, + 0x0, /* External 0: */ +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ +#else + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ + 0x0, /* External 4: */ +#endif + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ + 0x0, /* External 6: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ + 0x0, /* External 8: */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ + 0x0, /* External 11: */ +}; + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ + +int +mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * This is little evil, but works around the fact + * that revA boards have IDSEL starting at 18 + * and others boards (older) start at 12 + * + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ + {0, 0, 0, 0}, /* -- */ + {0, 0, 0, 0}, /* -- */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, + {PIRQC, PIRQD, PIRQA, PIRQB}, + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ + }; + + const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int +mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +#endif /* CONFIG_PCI */ + + +void __init mpc85xx_ads_pic_init(void) +{ + struct mpic *mpic1; + phys_addr_t OpenPIC_PAddr; + + /* Determine the Physical Address of the OpenPIC regs */ + OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + + mpic1 = mpic_alloc(OpenPIC_PAddr, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc85xx_ads_openpic_initsenses, + sizeof(mpc85xx_ads_openpic_initsenses), + " OpenPIC "); + BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); + mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); + mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); + mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); + mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); + mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); + mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); + mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); + + /* dummy mappings to get to 48 */ + mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); + mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); + mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); + mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); + + /* External ints */ + mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); + mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); + mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); + mpic_init(mpic1); +} + +/* + * Setup the architecture + */ +static void __init mpc85xx_ads_setup_arch(void) +{ + struct device_node *cpu; + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_ads_setup_arch()", 0); + + cpu = of_find_node_by_type(NULL, "cpu"); + if (cpu != 0) { + unsigned int *fp; + + fp = (int *)get_property(cpu, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(cpu); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pci_exclude_device = mpc85xx_exclude_device; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +void mpc85xx_ads_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: mpc85xx\n"); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + +void __init platform_init(void) +{ + ppc_md.setup_arch = mpc85xx_ads_setup_arch; + ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; + + ppc_md.init_IRQ = mpc85xx_ads_pic_init; + ppc_md.get_irq = mpic_get_irq; + + ppc_md.restart = mpc85xx_restart; + ppc_md.power_off = NULL; + ppc_md.halt = NULL; + + ppc_md.time_init = NULL; + ppc_md.set_rtc_time = NULL; + ppc_md.get_rtc_time = NULL; + ppc_md.calibrate_decr = generic_calibrate_decr; + + ppc_md.progress = udbg_progress; + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_ads platform_init(): exit", 0); +} diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c new file mode 100644 index 0000000..bad2901 --- /dev/null +++ b/arch/powerpc/platforms/85xx/pci.c @@ -0,0 +1,96 @@ +/* + * FSL SoC setup code + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/module.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#include <sysdev/fsl_soc.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +int mpc85xx_pci2_busno = 0; + +#ifdef CONFIG_PCI +int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int primary = 1, has_address = 0; + phys_addr_t immr = get_immrbase(); + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + } + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + /* PCI 1 */ + if ((rsrc.start & 0xfffff) == 0x8000) { + setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004); + } + /* PCI 2 */ + if ((rsrc.start & 0xfffff) == 0x9000) { + setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004); + primary = 0; + hose->bus_offset = hose->first_busno; + mpc85xx_pci2_busno = hose->first_busno; + } + + printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + return 0; +} + +#endif diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 04073fd..c4f6b0d 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -8,7 +8,7 @@ endif obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -obj-$(CONFIG_85xx) += 85xx/ +obj-$(CONFIG_PPC_85xx) += 85xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index 29c8678..6ad4b1a 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chrp_pegasos_eth.c - * * Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de> * Thanks to : * Dale Farnsworth <dale@farnsworth.org> diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index e1fadbf..8bf4307 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/setup.c - * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 78df2e7..12c6f68 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/chrp_time.c - * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * * Adapted for PowerPC (PReP) by Gary Thomas diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index a41d8b7..d771b8e 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -46,6 +46,7 @@ #include "setup.h" extern int piranha_simulator; +static int mf_initialized; /* * This is the structure layout for the Machine Facilites LPAR event @@ -143,7 +144,8 @@ static spinlock_t pending_event_spinlock; static struct pending_event *pending_event_head; static struct pending_event *pending_event_tail; static struct pending_event *pending_event_avail; -static struct pending_event pending_event_prealloc[16]; +#define PENDING_EVENT_PREALLOC_LEN 16 +static struct pending_event pending_event_prealloc[PENDING_EVENT_PREALLOC_LEN]; /* * Put a pending event onto the available queue, so it can get reused. @@ -597,7 +599,7 @@ void mf_power_off(void) * Global kernel interface to tell the VSP object in the primary * partition to reboot this partition. */ -void mf_reboot(void) +void mf_reboot(char *cmd) { printk(KERN_INFO "mf.c: Preparing to bounce...\n"); signal_ce_msg_simple(0x4e, NULL); @@ -625,7 +627,7 @@ void mf_display_src(u32 word) /* * Display a single word SRC of the form "PROGXXXX" on the VSP control panel. */ -void mf_display_progress(u16 value) +static __init void mf_display_progress_src(u16 value) { u8 ce[12]; u8 src[72]; @@ -649,30 +651,42 @@ void mf_display_progress(u16 value) * Clear the VSP control panel. Used to "erase" an SRC that was * previously displayed. */ -void mf_clear_src(void) +static void mf_clear_src(void) { signal_ce_msg_simple(0x4b, NULL); } +void __init mf_display_progress(u16 value) +{ + if (piranha_simulator || !mf_initialized) + return; + + if (0xFFFF == value) + mf_clear_src(); + else + mf_display_progress_src(value); +} + /* * Initialization code here. */ -void mf_init(void) +void __init mf_init(void) { int i; - /* initialize */ spin_lock_init(&pending_event_spinlock); - for (i = 0; - i < sizeof(pending_event_prealloc) / sizeof(*pending_event_prealloc); - ++i) + + for (i = 0; i < PENDING_EVENT_PREALLOC_LEN; i++) free_pending_event(&pending_event_prealloc[i]); + HvLpEvent_registerHandler(HvLpEvent_Type_MachineFac, &hv_handler); /* virtual continue ack */ signal_ce_msg_simple(0x57, NULL); - /* initialization complete */ + mf_initialized = 1; + mb(); + printk(KERN_NOTICE "mf.c: iSeries Linux LPAR Machine Facilities " "initialized\n"); } @@ -692,6 +706,43 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) complete(&rtc->com); } +static int mf_set_rtc(struct rtc_time *tm) +{ + char ce_time[12]; + u8 day, mon, hour, min, sec, y1, y2; + unsigned year; + + year = 1900 + tm->tm_year; + y1 = year / 100; + y2 = year % 100; + + sec = tm->tm_sec; + min = tm->tm_min; + hour = tm->tm_hour; + day = tm->tm_mday; + mon = tm->tm_mon + 1; + + BIN_TO_BCD(sec); + BIN_TO_BCD(min); + BIN_TO_BCD(hour); + BIN_TO_BCD(mon); + BIN_TO_BCD(day); + BIN_TO_BCD(y1); + BIN_TO_BCD(y2); + + memset(ce_time, 0, sizeof(ce_time)); + ce_time[3] = 0x41; + ce_time[4] = y1; + ce_time[5] = y2; + ce_time[6] = sec; + ce_time[7] = min; + ce_time[8] = hour; + ce_time[10] = day; + ce_time[11] = mon; + + return signal_ce_msg(ce_time, NULL); +} + static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) { tm->tm_wday = 0; @@ -747,7 +798,7 @@ static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) return 0; } -int mf_get_rtc(struct rtc_time *tm) +static int mf_get_rtc(struct rtc_time *tm) { struct ce_msg_comp_data ce_complete; struct rtc_time_data rtc_data; @@ -780,7 +831,7 @@ static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) rtc->busy = 0; } -int mf_get_boot_rtc(struct rtc_time *tm) +static int mf_get_boot_rtc(struct rtc_time *tm) { struct ce_msg_comp_data ce_complete; struct boot_rtc_time_data rtc_data; @@ -802,43 +853,6 @@ int mf_get_boot_rtc(struct rtc_time *tm) return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); } -int mf_set_rtc(struct rtc_time *tm) -{ - char ce_time[12]; - u8 day, mon, hour, min, sec, y1, y2; - unsigned year; - - year = 1900 + tm->tm_year; - y1 = year / 100; - y2 = year % 100; - - sec = tm->tm_sec; - min = tm->tm_min; - hour = tm->tm_hour; - day = tm->tm_mday; - mon = tm->tm_mon + 1; - - BIN_TO_BCD(sec); - BIN_TO_BCD(min); - BIN_TO_BCD(hour); - BIN_TO_BCD(mon); - BIN_TO_BCD(day); - BIN_TO_BCD(y1); - BIN_TO_BCD(y2); - - memset(ce_time, 0, sizeof(ce_time)); - ce_time[3] = 0x41; - ce_time[4] = y1; - ce_time[5] = y2; - ce_time[6] = sec; - ce_time[7] = min; - ce_time[8] = hour; - ce_time[10] = day; - ce_time[11] = mon; - - return signal_ce_msg(ce_time, NULL); -} - #ifdef CONFIG_PROC_FS static int proc_mf_dump_cmdline(char *page, char **start, off_t off, diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 3ecc4a6..fa45506 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -50,6 +50,7 @@ #include <asm/iseries/hv_call_xm.h> #include <asm/iseries/it_lp_queue.h> #include <asm/iseries/mf.h> +#include <asm/iseries/it_exp_vpd_panel.h> #include <asm/iseries/hv_lp_event.h> #include <asm/iseries/lpar_map.h> #include <asm/udbg.h> @@ -89,8 +90,6 @@ extern unsigned long embedded_sysmap_end; extern unsigned long iSeries_recal_tb; extern unsigned long iSeries_recal_titan; -static int mf_initialized; - static unsigned long cmd_mem_limit; struct MemoryBlock { @@ -303,8 +302,6 @@ static void __init iSeries_init_early(void) { DBG(" -> iSeries_init_early()\n"); - ppc64_firmware_features = FW_FEATURE_ISERIES; - ppc64_interrupt_controller = IC_ISERIES; #if defined(CONFIG_BLK_DEV_INITRD) @@ -349,8 +346,6 @@ static void __init iSeries_init_early(void) HvCallEvent_setLpEventQueueInterruptProc(0, 0); mf_init(); - mf_initialized = 1; - mb(); /* If we were passed an initrd, set the ROOT_DEV properly if the values * look sensible. If not, clear initrd reference. @@ -560,39 +555,10 @@ static void iSeries_show_cpuinfo(struct seq_file *m) seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n"); } -/* - * Document me. - */ -static void iSeries_restart(char *cmd) -{ - mf_reboot(); -} - -/* - * Document me. - */ -static void iSeries_power_off(void) -{ - mf_power_off(); -} - -/* - * Document me. - */ -static void iSeries_halt(void) -{ - mf_power_off(); -} - static void __init iSeries_progress(char * st, unsigned short code) { printk("Progress: [%04x] - %s\n", (unsigned)code, st); - if (!piranha_simulator && mf_initialized) { - if (code != 0xffff) - mf_display_progress(code); - else - mf_clear_src(); - } + mf_display_progress(code); } static void __init iSeries_fixup_klimit(void) @@ -711,7 +677,13 @@ void __init iSeries_init_IRQ(void) { } static int __init iseries_probe(int platform) { - return PLATFORM_ISERIES_LPAR == platform; + if (PLATFORM_ISERIES_LPAR != platform) + return 0; + + ppc64_firmware_features |= FW_FEATURE_ISERIES; + ppc64_firmware_features |= FW_FEATURE_LPAR; + + return 1; } struct machdep_calls __initdata iseries_md = { @@ -721,9 +693,9 @@ struct machdep_calls __initdata iseries_md = { .get_irq = iSeries_get_irq, .init_early = iSeries_init_early, .pcibios_fixup = iSeries_pci_final_fixup, - .restart = iSeries_restart, - .power_off = iSeries_power_off, - .halt = iSeries_halt, + .restart = mf_reboot, + .power_off = mf_power_off, + .halt = mf_power_off, .get_boot_time = iSeries_get_boot_time, .set_rtc_time = iSeries_set_rtc_time, .get_rtc_time = iSeries_get_rtc_time, @@ -917,6 +889,24 @@ void dt_cpus(struct iseries_flat_dt *dt) dt_end_node(dt); } +void dt_model(struct iseries_flat_dt *dt) +{ + char buf[16] = "IBM,"; + + /* "IBM," + mfgId[2:3] + systemSerial[1:5] */ + strne2a(buf + 4, xItExtVpdPanel.mfgID + 2, 2); + strne2a(buf + 6, xItExtVpdPanel.systemSerial + 1, 5); + buf[11] = '\0'; + dt_prop_str(dt, "system-id", buf); + + /* "IBM," + machineType[0:4] */ + strne2a(buf + 4, xItExtVpdPanel.machineType, 4); + buf[8] = '\0'; + dt_prop_str(dt, "model", buf); + + dt_prop_str(dt, "compatible", "IBM,iSeries"); +} + void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) { u64 tmp[2]; @@ -927,6 +917,7 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) dt_prop_u32(dt, "#address-cells", 2); dt_prop_u32(dt, "#size-cells", 2); + dt_model(dt); /* /memory */ dt_start_node(dt, "memory@0"); @@ -940,6 +931,7 @@ void build_flat_dt(struct iseries_flat_dt *dt, unsigned long phys_mem_size) /* /chosen */ dt_start_node(dt, "chosen"); dt_prop_u32(dt, "linux,platform", PLATFORM_ISERIES_LPAR); + dt_prop_str(dt, "bootargs", cmd_line); if (cmd_mem_limit) dt_prop_u64(dt, "linux,memory-limit", cmd_mem_limit); dt_end_node(dt); diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 50bc4eb..5e6981d 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/maple_time.c - * * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org), * IBM Corp. * diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 56fd4e0..cfd6527 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pmac_cpufreq.c - * * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> * diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index bbe7948..e49eddd 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pmac_feature.c - * * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) * Ben. Herrenschmidt (benh@kernel.crashing.org) * diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 3ebd045..5fd2899 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -1,6 +1,4 @@ /* - * arch/ppc/platforms/pmac_nvram.c - * * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org) * * This program is free software; you can redistribute it and/or diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 29c2946..385aab9 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -86,11 +86,10 @@ int ppc_override_l2cr = 0; int ppc_override_l2cr_value; int has_l2cache = 0; -int pmac_newworld = 1; +int pmac_newworld; static int current_root_goodness = -1; -extern int pmac_newworld; extern struct machdep_calls pmac_md; #define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */ @@ -308,9 +307,10 @@ static void __init pmac_setup_arch(void) for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; ) if (get_property(ic, "interrupt-controller", NULL)) break; - pmac_newworld = (ic != NULL); - if (ic) + if (ic) { + pmac_newworld = 1; of_node_put(ic); + } /* Lookup PCI hosts */ pmac_pci_init(); diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 61616d1..9308986 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -1,5 +1,6 @@ obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o pci_dlpar.o + setup.o iommu.o ras.o rtasd.o pci_dlpar.o \ + firmware.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c new file mode 100644 index 0000000..989f4bc --- /dev/null +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -0,0 +1,103 @@ +/* + * pSeries firmware setup code. + * + * Portions from arch/powerpc/platforms/pseries/setup.c: + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + * Modified by PPC64 Team, IBM Corp + * + * Portions from arch/powerpc/kernel/firmware.c + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com> + * Copyright (C) 2005 Stephen Rothwell, IBM Corporation + * + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include <asm/firmware.h> +#include <asm/prom.h> + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +typedef struct { + unsigned long val; + char * name; +} firmware_feature_t; + +static __initdata firmware_feature_t +firmware_features_table[FIRMWARE_MAX_FEATURES] = { + {FW_FEATURE_PFT, "hcall-pft"}, + {FW_FEATURE_TCE, "hcall-tce"}, + {FW_FEATURE_SPRG0, "hcall-sprg0"}, + {FW_FEATURE_DABR, "hcall-dabr"}, + {FW_FEATURE_COPY, "hcall-copy"}, + {FW_FEATURE_ASR, "hcall-asr"}, + {FW_FEATURE_DEBUG, "hcall-debug"}, + {FW_FEATURE_PERF, "hcall-perf"}, + {FW_FEATURE_DUMP, "hcall-dump"}, + {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, + {FW_FEATURE_MIGRATE, "hcall-migrate"}, + {FW_FEATURE_PERFMON, "hcall-perfmon"}, + {FW_FEATURE_CRQ, "hcall-crq"}, + {FW_FEATURE_VIO, "hcall-vio"}, + {FW_FEATURE_RDMA, "hcall-rdma"}, + {FW_FEATURE_LLAN, "hcall-lLAN"}, + {FW_FEATURE_BULK, "hcall-bulk"}, + {FW_FEATURE_XDABR, "hcall-xdabr"}, + {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, + {FW_FEATURE_SPLPAR, "hcall-splpar"}, +}; + +/* Build up the firmware features bitmask using the contents of + * device-tree/ibm,hypertas-functions. Ultimately this functionality may + * be moved into prom.c prom_init(). + */ +void __init fw_feature_init(void) +{ + struct device_node *dn; + char *hypertas, *s; + int len, i; + + DBG(" -> fw_feature_init()\n"); + + dn = of_find_node_by_path("/rtas"); + if (dn == NULL) { + printk(KERN_ERR "WARNING! Cannot find RTAS in device-tree!\n"); + goto out; + } + + hypertas = get_property(dn, "ibm,hypertas-functions", &len); + if (hypertas == NULL) + goto out; + + for (s = hypertas; s < hypertas + len; s += strlen(s) + 1) { + for (i = 0; i < FIRMWARE_MAX_FEATURES; i++) { + /* check value against table of strings */ + if (!firmware_features_table[i].name || + strcmp(firmware_features_table[i].name, s)) + continue; + + /* we have a match */ + ppc64_firmware_features |= + firmware_features_table[i].val; + break; + } + } + +out: + of_node_put(dn); + DBG(" <- fw_feature_init()\n"); +} diff --git a/arch/powerpc/platforms/pseries/firmware.h b/arch/powerpc/platforms/pseries/firmware.h new file mode 100644 index 0000000..714f56f --- /dev/null +++ b/arch/powerpc/platforms/pseries/firmware.h @@ -0,0 +1,17 @@ +/* + * Copyright 2006 IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _PSERIES_FIRMWARE_H +#define _PSERIES_FIRMWARE_H + +#include <asm/firmware.h> + +extern void __init fw_feature_init(void); + +#endif /* _PSERIES_FIRMWARE_H */ diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S index 176e8da..db7c19f 100644 --- a/arch/powerpc/platforms/pseries/hvCall.S +++ b/arch/powerpc/platforms/pseries/hvCall.S @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/pSeries_hvCall.S - * * This file contains the generic code to perform a call to the * pSeries LPAR hypervisor. * NOTE: this file will go away when we move to inline this work. diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 48cfbfc..2643078 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/pSeries_iommu.c - * * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation * * Rewrite, cleanup: @@ -582,7 +580,7 @@ void iommu_init_early_pSeries(void) return; } - if (platform_is_lpar()) { + if (firmware_has_feature(FW_FEATURE_LPAR)) { if (firmware_has_feature(FW_FEATURE_MULTITCE)) { ppc_md.tce_build = tce_buildmulti_pSeriesLP; ppc_md.tce_free = tce_freemulti_pSeriesLP; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index 999a962..946ad59 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -1,6 +1,4 @@ /* - * arch/ppc64/kernel/pSeries_pci.c - * * Copyright (C) 2001 Dave Engebretsen, IBM Corporation * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 9edeca8..44d5c7f 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -60,7 +60,6 @@ #include <asm/time.h> #include <asm/nvram.h> #include "xics.h" -#include <asm/firmware.h> #include <asm/pmc.h> #include <asm/mpic.h> #include <asm/ppc-pci.h> @@ -70,6 +69,7 @@ #include "plpar_wrappers.h" #include "ras.h" +#include "firmware.h" #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -246,7 +246,7 @@ static void __init pSeries_setup_arch(void) ppc_md.idle_loop = default_idle; } - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; else ppc_md.enable_pmcs = power4_enable_pmcs; @@ -262,53 +262,6 @@ static int __init pSeries_init_panel(void) } arch_initcall(pSeries_init_panel); - -/* Build up the ppc64_firmware_features bitmask field - * using contents of device-tree/ibm,hypertas-functions. - * Ultimately this functionality may be moved into prom.c prom_init(). - */ -static void __init fw_feature_init(void) -{ - struct device_node * dn; - char * hypertas; - unsigned int len; - - DBG(" -> fw_feature_init()\n"); - - ppc64_firmware_features = 0; - dn = of_find_node_by_path("/rtas"); - if (dn == NULL) { - printk(KERN_ERR "WARNING ! Cannot find RTAS in device-tree !\n"); - goto no_rtas; - } - - hypertas = get_property(dn, "ibm,hypertas-functions", &len); - if (hypertas) { - while (len > 0){ - int i, hypertas_len; - /* check value against table of strings */ - for(i=0; i < FIRMWARE_MAX_FEATURES ;i++) { - if ((firmware_features_table[i].name) && - (strcmp(firmware_features_table[i].name,hypertas))==0) { - /* we have a match */ - ppc64_firmware_features |= - (firmware_features_table[i].val); - break; - } - } - hypertas_len = strlen(hypertas); - len -= hypertas_len +1; - hypertas+= hypertas_len +1; - } - } - - of_node_put(dn); -no_rtas: - - DBG(" <- fw_feature_init()\n"); -} - - static void __init pSeries_discover_pic(void) { struct device_node *np; @@ -367,21 +320,16 @@ static int pseries_set_xdabr(unsigned long dabr) */ static void __init pSeries_init_early(void) { - int iommu_off = 0; - DBG(" -> pSeries_init_early()\n"); fw_feature_init(); - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) hpte_init_lpar(); - else { + else hpte_init_native(); - iommu_off = (of_chosen && - get_property(of_chosen, "linux,iommu-off", NULL)); - } - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) find_udbg_vterm(); if (firmware_has_feature(FW_FEATURE_DABR)) @@ -437,6 +385,9 @@ static int __init pSeries_probe(int platform) * it here ... */ + if (platform == PLATFORM_PSERIES_LPAR) + ppc64_firmware_features |= FW_FEATURE_LPAR; + return 1; } @@ -576,7 +527,7 @@ static void pseries_shared_idle(void) static int pSeries_pci_probe_mode(struct pci_bus *bus) { - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 8d710af5..3cf78a6 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -443,7 +443,7 @@ void __init smp_init_pSeries(void) smp_ops->cpu_die = pSeries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) pSeries_reconfig_notifier_register(&pSeries_smp_nb); #endif diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index fd823c7..eb86cdb 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -20,6 +20,7 @@ #include <linux/gfp.h> #include <linux/radix-tree.h> #include <linux/cpu.h> +#include <asm/firmware.h> #include <asm/prom.h> #include <asm/io.h> #include <asm/pgtable.h> @@ -536,7 +537,7 @@ nextnode: of_node_put(np); } - if (platform_is_lpar()) + if (firmware_has_feature(FW_FEATURE_LPAR)) ops = &pSeriesLP_ops; else { #ifdef CONFIG_SMP |
