summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/pseries/eeh_driver.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/eeh_driver.c')
-rw-r--r--arch/powerpc/platforms/pseries/eeh_driver.c213
1 files changed, 120 insertions, 93 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 1b6cb10..baf92cd 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -33,8 +33,14 @@
#include <asm/prom.h>
#include <asm/rtas.h>
-
-static inline const char * pcid_name (struct pci_dev *pdev)
+/**
+ * eeh_pcid_name - Retrieve name of PCI device driver
+ * @pdev: PCI device
+ *
+ * This routine is used to retrieve the name of PCI device driver
+ * if that's valid.
+ */
+static inline const char *eeh_pcid_name(struct pci_dev *pdev)
{
if (pdev && pdev->dev.driver)
return pdev->dev.driver->name;
@@ -64,48 +70,59 @@ static void print_device_node_tree(struct pci_dn *pdn, int dent)
#endif
/**
- * eeh_disable_irq - disable interrupt for the recovering device
+ * eeh_disable_irq - Disable interrupt for the recovering device
+ * @dev: PCI device
+ *
+ * This routine must be called when reporting temporary or permanent
+ * error to the particular PCI device to disable interrupt of that
+ * device. If the device has enabled MSI or MSI-X interrupt, we needn't
+ * do real work because EEH should freeze DMA transfers for those PCI
+ * devices encountering EEH errors, which includes MSI or MSI-X.
*/
static void eeh_disable_irq(struct pci_dev *dev)
{
- struct device_node *dn = pci_device_to_OF_node(dev);
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
/* Don't disable MSI and MSI-X interrupts. They are
* effectively disabled by the DMA Stopped state
* when an EEH error occurs.
- */
+ */
if (dev->msi_enabled || dev->msix_enabled)
return;
if (!irq_has_action(dev->irq))
return;
- PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
+ edev->mode |= EEH_MODE_IRQ_DISABLED;
disable_irq_nosync(dev->irq);
}
/**
- * eeh_enable_irq - enable interrupt for the recovering device
+ * eeh_enable_irq - Enable interrupt for the recovering device
+ * @dev: PCI device
+ *
+ * This routine must be called to enable interrupt while failed
+ * device could be resumed.
*/
static void eeh_enable_irq(struct pci_dev *dev)
{
- struct device_node *dn = pci_device_to_OF_node(dev);
+ struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
- if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
- PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+ if ((edev->mode) & EEH_MODE_IRQ_DISABLED) {
+ edev->mode &= ~EEH_MODE_IRQ_DISABLED;
enable_irq(dev->irq);
}
}
-/* ------------------------------------------------------- */
/**
- * eeh_report_error - report pci error to each device driver
+ * eeh_report_error - Report pci error to each device driver
+ * @dev: PCI device
+ * @userdata: return value
*
* Report an EEH error to each device driver, collect up and
* merge the device driver responses. Cumulative response
* passed back in "userdata".
*/
-
static int eeh_report_error(struct pci_dev *dev, void *userdata)
{
enum pci_ers_result rc, *res = userdata;
@@ -122,7 +139,7 @@ static int eeh_report_error(struct pci_dev *dev, void *userdata)
!driver->err_handler->error_detected)
return 0;
- rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
+ rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
/* A driver that needs a reset trumps all others */
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
@@ -132,13 +149,14 @@ static int eeh_report_error(struct pci_dev *dev, void *userdata)
}
/**
- * eeh_report_mmio_enabled - tell drivers that MMIO has been enabled
+ * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled
+ * @dev: PCI device
+ * @userdata: return value
*
* Tells each device driver that IO ports, MMIO and config space I/O
* are now enabled. Collects up and merges the device driver responses.
* Cumulative response passed back in "userdata".
*/
-
static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
{
enum pci_ers_result rc, *res = userdata;
@@ -149,7 +167,7 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
!driver->err_handler->mmio_enabled)
return 0;
- rc = driver->err_handler->mmio_enabled (dev);
+ rc = driver->err_handler->mmio_enabled(dev);
/* A driver that needs a reset trumps all others */
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
@@ -159,9 +177,15 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
}
/**
- * eeh_report_reset - tell device that slot has been reset
+ * eeh_report_reset - Tell device that slot has been reset
+ * @dev: PCI device
+ * @userdata: return value
+ *
+ * This routine must be called while EEH tries to reset particular
+ * PCI device so that the associated PCI device driver could take
+ * some actions, usually to save data the driver needs so that the
+ * driver can work again while the device is recovered.
*/
-
static int eeh_report_reset(struct pci_dev *dev, void *userdata)
{
enum pci_ers_result rc, *res = userdata;
@@ -188,9 +212,14 @@ static int eeh_report_reset(struct pci_dev *dev, void *userdata)
}
/**
- * eeh_report_resume - tell device to resume normal operations
+ * eeh_report_resume - Tell device to resume normal operations
+ * @dev: PCI device
+ * @userdata: return value
+ *
+ * This routine must be called to notify the device driver that it
+ * could resume so that the device driver can do some initialization
+ * to make the recovered device work again.
*/
-
static int eeh_report_resume(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
@@ -212,12 +241,13 @@ static int eeh_report_resume(struct pci_dev *dev, void *userdata)
}
/**
- * eeh_report_failure - tell device driver that device is dead.
+ * eeh_report_failure - Tell device driver that device is dead.
+ * @dev: PCI device
+ * @userdata: return value
*
* This informs the device driver that the device is permanently
* dead, and that no further recovery attempts will be made on it.
*/
-
static int eeh_report_failure(struct pci_dev *dev, void *userdata)
{
struct pci_driver *driver = dev->driver;
@@ -238,65 +268,46 @@ static int eeh_report_failure(struct pci_dev *dev, void *userdata)
return 0;
}
-/* ------------------------------------------------------- */
/**
- * handle_eeh_events -- reset a PCI device after hard lockup.
- *
- * pSeries systems will isolate a PCI slot if the PCI-Host
- * bridge detects address or data parity errors, DMA's
- * occurring to wild addresses (which usually happen due to
- * bugs in device drivers or in PCI adapter firmware).
- * Slot isolations also occur if #SERR, #PERR or other misc
- * PCI-related errors are detected.
+ * eeh_reset_device - Perform actual reset of a pci slot
+ * @edev: PE associated EEH device
+ * @bus: PCI bus corresponding to the isolcated slot
*
- * Recovery process consists of unplugging the device driver
- * (which generated hotplug events to userspace), then issuing
- * a PCI #RST to the device, then reconfiguring the PCI config
- * space for all bridges & devices under this slot, and then
- * finally restarting the device drivers (which cause a second
- * set of hotplug events to go out to userspace).
+ * This routine must be called to do reset on the indicated PE.
+ * During the reset, udev might be invoked because those affected
+ * PCI devices will be removed and then added.
*/
-
-/**
- * eeh_reset_device() -- perform actual reset of a pci slot
- * @bus: pointer to the pci bus structure corresponding
- * to the isolated slot. A non-null value will
- * cause all devices under the bus to be removed
- * and then re-added.
- * @pe_dn: pointer to a "Partionable Endpoint" device node.
- * This is the top-level structure on which pci
- * bus resets can be performed.
- */
-
-static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
+static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus)
{
struct device_node *dn;
int cnt, rc;
/* pcibios will clear the counter; save the value */
- cnt = pe_dn->eeh_freeze_count;
+ cnt = edev->freeze_count;
if (bus)
pcibios_remove_pci_devices(bus);
/* Reset the pci controller. (Asserts RST#; resets config space).
* Reconfigure bridges and devices. Don't try to bring the system
- * up if the reset failed for some reason. */
- rc = rtas_set_slot_reset(pe_dn);
+ * up if the reset failed for some reason.
+ */
+ rc = eeh_reset_pe(edev);
if (rc)
return rc;
- /* Walk over all functions on this device. */
- dn = pe_dn->node;
- if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
+ /* Walk over all functions on this device. */
+ dn = eeh_dev_to_of_node(edev);
+ if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent))
dn = dn->parent->child;
while (dn) {
- struct pci_dn *ppe = PCI_DN(dn);
+ struct eeh_dev *pedev = of_node_to_eeh_dev(dn);
+
/* On Power4, always true because eeh_pe_config_addr=0 */
- if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) {
- rtas_configure_bridge(ppe);
- eeh_restore_bars(ppe);
+ if (edev->pe_config_addr == pedev->pe_config_addr) {
+ eeh_ops->configure_bridge(dn);
+ eeh_restore_bars(pedev);
}
dn = dn->sibling;
}
@@ -308,10 +319,10 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
* potentially weird things happen.
*/
if (bus) {
- ssleep (5);
+ ssleep(5);
pcibios_add_pci_devices(bus);
}
- pe_dn->eeh_freeze_count = cnt;
+ edev->freeze_count = cnt;
return 0;
}
@@ -321,23 +332,39 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
*/
#define MAX_WAIT_FOR_RECOVERY 150
-struct pci_dn * handle_eeh_events (struct eeh_event *event)
+/**
+ * eeh_handle_event - Reset a PCI device after hard lockup.
+ * @event: EEH event
+ *
+ * While PHB detects address or data parity errors on particular PCI
+ * slot, the associated PE will be frozen. Besides, DMA's occurring
+ * to wild addresses (which usually happen due to bugs in device
+ * drivers or in PCI adapter firmware) can cause EEH error. #SERR,
+ * #PERR or other misc PCI-related errors also can trigger EEH errors.
+ *
+ * Recovery process consists of unplugging the device driver (which
+ * generated hotplug events to userspace), then issuing a PCI #RST to
+ * the device, then reconfiguring the PCI config space for all bridges
+ * & devices under this slot, and then finally restarting the device
+ * drivers (which cause a second set of hotplug events to go out to
+ * userspace).
+ */
+struct eeh_dev *handle_eeh_events(struct eeh_event *event)
{
struct device_node *frozen_dn;
- struct pci_dn *frozen_pdn;
+ struct eeh_dev *frozen_edev;
struct pci_bus *frozen_bus;
int rc = 0;
enum pci_ers_result result = PCI_ERS_RESULT_NONE;
const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str;
- frozen_dn = find_device_pe(event->dn);
+ frozen_dn = eeh_find_device_pe(eeh_dev_to_of_node(event->edev));
if (!frozen_dn) {
-
- location = of_get_property(event->dn, "ibm,loc-code", NULL);
+ location = of_get_property(eeh_dev_to_of_node(event->edev), "ibm,loc-code", NULL);
location = location ? location : "unknown";
printk(KERN_ERR "EEH: Error: Cannot find partition endpoint "
"for location=%s pci addr=%s\n",
- location, eeh_pci_name(event->dev));
+ location, eeh_pci_name(eeh_dev_to_pci_dev(event->edev)));
return NULL;
}
@@ -350,9 +377,10 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
* which was always an EADS pci bridge. In the new style,
* there might not be any EADS bridges, and even when there are,
* the firmware marks them as "EEH incapable". So another
- * two-step is needed to find the pci bus.. */
+ * two-step is needed to find the pci bus..
+ */
if (!frozen_bus)
- frozen_bus = pcibios_find_pci_bus (frozen_dn->parent);
+ frozen_bus = pcibios_find_pci_bus(frozen_dn->parent);
if (!frozen_bus) {
printk(KERN_ERR "EEH: Cannot find PCI bus "
@@ -361,22 +389,21 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
return NULL;
}
- frozen_pdn = PCI_DN(frozen_dn);
- frozen_pdn->eeh_freeze_count++;
+ frozen_edev = of_node_to_eeh_dev(frozen_dn);
+ frozen_edev->freeze_count++;
+ pci_str = eeh_pci_name(eeh_dev_to_pci_dev(event->edev));
+ drv_str = eeh_pcid_name(eeh_dev_to_pci_dev(event->edev));
- pci_str = eeh_pci_name(event->dev);
- drv_str = pcid_name(event->dev);
-
- if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
+ if (frozen_edev->freeze_count > EEH_MAX_ALLOWED_FREEZES)
goto excess_failures;
printk(KERN_WARNING
"EEH: This PCI device has failed %d times in the last hour:\n",
- frozen_pdn->eeh_freeze_count);
+ frozen_edev->freeze_count);
- if (frozen_pdn->pcidev) {
- bus_pci_str = pci_name(frozen_pdn->pcidev);
- bus_drv_str = pcid_name(frozen_pdn->pcidev);
+ if (frozen_edev->pdev) {
+ bus_pci_str = pci_name(frozen_edev->pdev);
+ bus_drv_str = eeh_pcid_name(frozen_edev->pdev);
printk(KERN_WARNING
"EEH: Bus location=%s driver=%s pci addr=%s\n",
location, bus_drv_str, bus_pci_str);
@@ -395,9 +422,10 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
pci_walk_bus(frozen_bus, eeh_report_error, &result);
/* Get the current PCI slot state. This can take a long time,
- * sometimes over 3 seconds for certain systems. */
- rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000);
- if (rc < 0) {
+ * sometimes over 3 seconds for certain systems.
+ */
+ rc = eeh_ops->wait_state(eeh_dev_to_of_node(frozen_edev), MAX_WAIT_FOR_RECOVERY*1000);
+ if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
printk(KERN_WARNING "EEH: Permanent failure\n");
goto hard_fail;
}
@@ -406,14 +434,14 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
* don't post the error log until after all dev drivers
* have been informed.
*/
- eeh_slot_error_detail(frozen_pdn, EEH_LOG_TEMP_FAILURE);
+ eeh_slot_error_detail(frozen_edev, EEH_LOG_TEMP);
/* If all device drivers were EEH-unaware, then shut
* down all of the device drivers, and hope they
* go down willingly, without panicing the system.
*/
if (result == PCI_ERS_RESULT_NONE) {
- rc = eeh_reset_device(frozen_pdn, frozen_bus);
+ rc = eeh_reset_device(frozen_edev, frozen_bus);
if (rc) {
printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc);
goto hard_fail;
@@ -422,7 +450,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
/* If all devices reported they can proceed, then re-enable MMIO */
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
- rc = rtas_pci_enable(frozen_pdn, EEH_THAW_MMIO);
+ rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_MMIO);
if (rc < 0)
goto hard_fail;
@@ -436,7 +464,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
/* If all devices reported they can proceed, then re-enable DMA */
if (result == PCI_ERS_RESULT_CAN_RECOVER) {
- rc = rtas_pci_enable(frozen_pdn, EEH_THAW_DMA);
+ rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_DMA);
if (rc < 0)
goto hard_fail;
@@ -454,7 +482,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
/* If any device called out for a reset, then reset the slot */
if (result == PCI_ERS_RESULT_NEED_RESET) {
- rc = eeh_reset_device(frozen_pdn, NULL);
+ rc = eeh_reset_device(frozen_edev, NULL);
if (rc) {
printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc);
goto hard_fail;
@@ -473,7 +501,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
/* Tell all device drivers that they can resume operations */
pci_walk_bus(frozen_bus, eeh_report_resume, NULL);
- return frozen_pdn;
+ return frozen_edev;
excess_failures:
/*
@@ -486,7 +514,7 @@ excess_failures:
"has failed %d times in the last hour "
"and has been permanently disabled.\n"
"Please try reseating this device or replacing it.\n",
- location, drv_str, pci_str, frozen_pdn->eeh_freeze_count);
+ location, drv_str, pci_str, frozen_edev->freeze_count);
goto perm_error;
hard_fail:
@@ -497,7 +525,7 @@ hard_fail:
location, drv_str, pci_str);
perm_error:
- eeh_slot_error_detail(frozen_pdn, EEH_LOG_PERM_FAILURE);
+ eeh_slot_error_detail(frozen_edev, EEH_LOG_PERM);
/* Notify all devices that they're about to go down. */
pci_walk_bus(frozen_bus, eeh_report_failure, NULL);
@@ -508,4 +536,3 @@ perm_error:
return NULL;
}
-/* ---------- end of file ---------- */
OpenPOWER on IntegriCloud