summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/powernv/eeh-ioda.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/powernv/eeh-ioda.c')
-rw-r--r--arch/powerpc/platforms/powernv/eeh-ioda.c916
1 files changed, 916 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
new file mode 100644
index 0000000..0cd1c4a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -0,0 +1,916 @@
+/*
+ * The file intends to implement the functions needed by EEH, which is
+ * built on IODA compliant chip. Actually, lots of functions related
+ * to EEH would be built based on the OPAL APIs.
+ *
+ * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bootmem.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/notifier.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/io.h>
+#include <asm/iommu.h>
+#include <asm/msi_bitmap.h>
+#include <asm/opal.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+#include <asm/tce.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/* Debugging option */
+#ifdef IODA_EEH_DBG_ON
+#define IODA_EEH_DBG(args...) pr_info(args)
+#else
+#define IODA_EEH_DBG(args...)
+#endif
+
+static char *hub_diag = NULL;
+static int ioda_eeh_nb_init = 0;
+
+static int ioda_eeh_event(struct notifier_block *nb,
+ unsigned long events, void *change)
+{
+ uint64_t changed_evts = (uint64_t)change;
+
+ /* We simply send special EEH event */
+ if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
+ (events & OPAL_EVENT_PCI_ERROR))
+ eeh_send_failure_event(NULL);
+
+ return 0;
+}
+
+static struct notifier_block ioda_eeh_nb = {
+ .notifier_call = ioda_eeh_event,
+ .next = NULL,
+ .priority = 0
+};
+
+#ifdef CONFIG_DEBUG_FS
+static int ioda_eeh_dbgfs_set(void *data, u64 val)
+{
+ struct pci_controller *hose = data;
+ struct pnv_phb *phb = hose->private_data;
+
+ out_be64(phb->regs + 0xD10, val);
+ return 0;
+}
+
+static int ioda_eeh_dbgfs_get(void *data, u64 *val)
+{
+ struct pci_controller *hose = data;
+ struct pnv_phb *phb = hose->private_data;
+
+ *val = in_be64(phb->regs + 0xD10);
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(ioda_eeh_dbgfs_ops, ioda_eeh_dbgfs_get,
+ ioda_eeh_dbgfs_set, "0x%llx\n");
+#endif /* CONFIG_DEBUG_FS */
+
+/**
+ * ioda_eeh_post_init - Chip dependent post initialization
+ * @hose: PCI controller
+ *
+ * The function will be called after eeh PEs and devices
+ * have been built. That means the EEH is ready to supply
+ * service with I/O cache.
+ */
+static int ioda_eeh_post_init(struct pci_controller *hose)
+{
+ struct pnv_phb *phb = hose->private_data;
+ int ret;
+
+ /* Register OPAL event notifier */
+ if (!ioda_eeh_nb_init) {
+ ret = opal_notifier_register(&ioda_eeh_nb);
+ if (ret) {
+ pr_err("%s: Can't register OPAL event notifier (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ioda_eeh_nb_init = 1;
+ }
+
+ /* FIXME: Enable it for PHB3 later */
+ if (phb->type == PNV_PHB_IODA1) {
+ if (!hub_diag) {
+ hub_diag = (char *)__get_free_page(GFP_KERNEL |
+ __GFP_ZERO);
+ if (!hub_diag) {
+ pr_err("%s: Out of memory !\n",
+ __func__);
+ return -ENOMEM;
+ }
+ }
+
+#ifdef CONFIG_DEBUG_FS
+ if (phb->dbgfs)
+ debugfs_create_file("err_injct", 0600,
+ phb->dbgfs, hose,
+ &ioda_eeh_dbgfs_ops);
+#endif
+
+ phb->eeh_state |= PNV_EEH_STATE_ENABLED;
+ }
+
+ return 0;
+}
+
+/**
+ * ioda_eeh_set_option - Set EEH operation or I/O setting
+ * @pe: EEH PE
+ * @option: options
+ *
+ * Enable or disable EEH option for the indicated PE. The
+ * function also can be used to enable I/O or DMA for the
+ * PE.
+ */
+static int ioda_eeh_set_option(struct eeh_pe *pe, int option)
+{
+ s64 ret;
+ u32 pe_no;
+ struct pci_controller *hose = pe->phb;
+ struct pnv_phb *phb = hose->private_data;
+
+ /* Check on PE number */
+ if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
+ pr_err("%s: PE address %x out of range [0, %x] "
+ "on PHB#%x\n",
+ __func__, pe->addr, phb->ioda.total_pe,
+ hose->global_number);
+ return -EINVAL;
+ }
+
+ pe_no = pe->addr;
+ switch (option) {
+ case EEH_OPT_DISABLE:
+ ret = -EEXIST;
+ break;
+ case EEH_OPT_ENABLE:
+ ret = 0;
+ break;
+ case EEH_OPT_THAW_MMIO:
+ ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO);
+ if (ret) {
+ pr_warning("%s: Failed to enable MMIO for "
+ "PHB#%x-PE#%x, err=%lld\n",
+ __func__, hose->global_number, pe_no, ret);
+ return -EIO;
+ }
+
+ break;
+ case EEH_OPT_THAW_DMA:
+ ret = opal_pci_eeh_freeze_clear(phb->opal_id, pe_no,
+ OPAL_EEH_ACTION_CLEAR_FREEZE_DMA);
+ if (ret) {
+ pr_warning("%s: Failed to enable DMA for "
+ "PHB#%x-PE#%x, err=%lld\n",
+ __func__, hose->global_number, pe_no, ret);
+ return -EIO;
+ }
+
+ break;
+ default:
+ pr_warning("%s: Invalid option %d\n", __func__, option);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * ioda_eeh_get_state - Retrieve the state of PE
+ * @pe: EEH PE
+ *
+ * The PE's state should be retrieved from the PEEV, PEST
+ * IODA tables. Since the OPAL has exported the function
+ * to do it, it'd better to use that.
+ */
+static int ioda_eeh_get_state(struct eeh_pe *pe)
+{
+ s64 ret = 0;
+ u8 fstate;
+ u16 pcierr;
+ u32 pe_no;
+ int result;
+ struct pci_controller *hose = pe->phb;
+ struct pnv_phb *phb = hose->private_data;
+
+ /*
+ * Sanity check on PE address. The PHB PE address should
+ * be zero.
+ */
+ if (pe->addr < 0 || pe->addr >= phb->ioda.total_pe) {
+ pr_err("%s: PE address %x out of range [0, %x] "
+ "on PHB#%x\n",
+ __func__, pe->addr, phb->ioda.total_pe,
+ hose->global_number);
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ /* Retrieve PE status through OPAL */
+ pe_no = pe->addr;
+ ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
+ &fstate, &pcierr, NULL);
+ if (ret) {
+ pr_err("%s: Failed to get EEH status on "
+ "PHB#%x-PE#%x\n, err=%lld\n",
+ __func__, hose->global_number, pe_no, ret);
+ return EEH_STATE_NOT_SUPPORT;
+ }
+
+ /* Check PHB status */
+ if (pe->type & EEH_PE_PHB) {
+ result = 0;
+ result &= ~EEH_STATE_RESET_ACTIVE;
+
+ if (pcierr != OPAL_EEH_PHB_ERROR) {
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ result |= EEH_STATE_MMIO_ENABLED;
+ result |= EEH_STATE_DMA_ENABLED;
+ }
+
+ return result;
+ }
+
+ /* Parse result out */
+ result = 0;
+ switch (fstate) {
+ case OPAL_EEH_STOPPED_NOT_FROZEN:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ result |= EEH_STATE_MMIO_ENABLED;
+ result |= EEH_STATE_DMA_ENABLED;
+ break;
+ case OPAL_EEH_STOPPED_MMIO_FREEZE:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_DMA_ACTIVE;
+ result |= EEH_STATE_DMA_ENABLED;
+ break;
+ case OPAL_EEH_STOPPED_DMA_FREEZE:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ result |= EEH_STATE_MMIO_ACTIVE;
+ result |= EEH_STATE_MMIO_ENABLED;
+ break;
+ case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
+ result &= ~EEH_STATE_RESET_ACTIVE;
+ break;
+ case OPAL_EEH_STOPPED_RESET:
+ result |= EEH_STATE_RESET_ACTIVE;
+ break;
+ case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
+ result |= EEH_STATE_UNAVAILABLE;
+ break;
+ case OPAL_EEH_STOPPED_PERM_UNAVAIL:
+ result |= EEH_STATE_NOT_SUPPORT;
+ break;
+ default:
+ pr_warning("%s: Unexpected EEH status 0x%x "
+ "on PHB#%x-PE#%x\n",
+ __func__, fstate, hose->global_number, pe_no);
+ }
+
+ return result;
+}
+
+static int ioda_eeh_pe_clear(struct eeh_pe *pe)
+{
+ struct pci_controller *hose;
+ struct pnv_phb *phb;
+ u32 pe_no;
+ u8 fstate;
+ u16 pcierr;
+ s64 ret;
+
+ pe_no = pe->addr;
+ hose = pe->phb;
+ phb = pe->phb->private_data;
+
+ /* Clear the EEH error on the PE */
+ ret = opal_pci_eeh_freeze_clear(phb->opal_id,
+ pe_no, OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
+ if (ret) {
+ pr_err("%s: Failed to clear EEH error for "
+ "PHB#%x-PE#%x, err=%lld\n",
+ __func__, hose->global_number, pe_no, ret);
+ return -EIO;
+ }
+
+ /*
+ * Read the PE state back and verify that the frozen
+ * state has been removed.
+ */
+ ret = opal_pci_eeh_freeze_status(phb->opal_id, pe_no,
+ &fstate, &pcierr, NULL);
+ if (ret) {
+ pr_err("%s: Failed to get EEH status on "
+ "PHB#%x-PE#%x\n, err=%lld\n",
+ __func__, hose->global_number, pe_no, ret);
+ return -EIO;
+ }
+
+ if (fstate != OPAL_EEH_STOPPED_NOT_FROZEN) {
+ pr_err("%s: Frozen state not cleared on "
+ "PHB#%x-PE#%x, sts=%x\n",
+ __func__, hose->global_number, pe_no, fstate);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
+{
+ s64 rc = OPAL_HARDWARE;
+
+ while (1) {
+ rc = opal_pci_poll(phb->opal_id);
+ if (rc <= 0)
+ break;
+
+ msleep(rc);
+ }
+
+ return rc;
+}
+
+static int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
+{
+ struct pnv_phb *phb = hose->private_data;
+ s64 rc = OPAL_HARDWARE;
+
+ pr_debug("%s: Reset PHB#%x, option=%d\n",
+ __func__, hose->global_number, option);
+
+ /* Issue PHB complete reset request */
+ if (option == EEH_RESET_FUNDAMENTAL ||
+ option == EEH_RESET_HOT)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_PHB_COMPLETE,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_DEACTIVATE)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_PHB_COMPLETE,
+ OPAL_DEASSERT_RESET);
+ if (rc < 0)
+ goto out;
+
+ /*
+ * Poll state of the PHB until the request is done
+ * successfully.
+ */
+ rc = ioda_eeh_phb_poll(phb);
+out:
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+
+static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
+{
+ struct pnv_phb *phb = hose->private_data;
+ s64 rc = OPAL_SUCCESS;
+
+ pr_debug("%s: Reset PHB#%x, option=%d\n",
+ __func__, hose->global_number, option);
+
+ /*
+ * During the reset deassert time, we needn't care
+ * the reset scope because the firmware does nothing
+ * for fundamental or hot reset during deassert phase.
+ */
+ if (option == EEH_RESET_FUNDAMENTAL)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_PCI_FUNDAMENTAL_RESET,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_HOT)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_PCI_HOT_RESET,
+ OPAL_ASSERT_RESET);
+ else if (option == EEH_RESET_DEACTIVATE)
+ rc = opal_pci_reset(phb->opal_id,
+ OPAL_PCI_HOT_RESET,
+ OPAL_DEASSERT_RESET);
+ if (rc < 0)
+ goto out;
+
+ /* Poll state of the PHB until the request is done */
+ rc = ioda_eeh_phb_poll(phb);
+out:
+ if (rc != OPAL_SUCCESS)
+ return -EIO;
+
+ return 0;
+}
+
+static int ioda_eeh_bridge_reset(struct pci_controller *hose,
+ struct pci_dev *dev, int option)
+{
+ u16 ctrl;
+
+ pr_debug("%s: Reset device %04x:%02x:%02x.%01x with option %d\n",
+ __func__, hose->global_number, dev->bus->number,
+ PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), option);
+
+ switch (option) {
+ case EEH_RESET_FUNDAMENTAL:
+ case EEH_RESET_HOT:
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+ ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+ break;
+ case EEH_RESET_DEACTIVATE:
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl);
+ ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * ioda_eeh_reset - Reset the indicated PE
+ * @pe: EEH PE
+ * @option: reset option
+ *
+ * Do reset on the indicated PE. For PCI bus sensitive PE,
+ * we need to reset the parent p2p bridge. The PHB has to
+ * be reinitialized if the p2p bridge is root bridge. For
+ * PCI device sensitive PE, we will try to reset the device
+ * through FLR. For now, we don't have OPAL APIs to do HARD
+ * reset yet, so all reset would be SOFT (HOT) reset.
+ */
+static int ioda_eeh_reset(struct eeh_pe *pe, int option)
+{
+ struct pci_controller *hose = pe->phb;
+ struct eeh_dev *edev;
+ struct pci_dev *dev;
+ int ret;
+
+ /*
+ * Anyway, we have to clear the problematic state for the
+ * corresponding PE. However, we needn't do it if the PE
+ * is PHB associated. That means the PHB is having fatal
+ * errors and it needs reset. Further more, the AIB interface
+ * isn't reliable any more.
+ */
+ if (!(pe->type & EEH_PE_PHB) &&
+ (option == EEH_RESET_HOT ||
+ option == EEH_RESET_FUNDAMENTAL)) {
+ ret = ioda_eeh_pe_clear(pe);
+ if (ret)
+ return -EIO;
+ }
+
+ /*
+ * The rules applied to reset, either fundamental or hot reset:
+ *
+ * We always reset the direct upstream bridge of the PE. If the
+ * direct upstream bridge isn't root bridge, we always take hot
+ * reset no matter what option (fundamental or hot) is. Otherwise,
+ * we should do the reset according to the required option.
+ */
+ if (pe->type & EEH_PE_PHB) {
+ ret = ioda_eeh_phb_reset(hose, option);
+ } else {
+ if (pe->type & EEH_PE_DEVICE) {
+ /*
+ * If it's device PE, we didn't refer to the parent
+ * PCI bus yet. So we have to figure it out indirectly.
+ */
+ edev = list_first_entry(&pe->edevs,
+ struct eeh_dev, list);
+ dev = eeh_dev_to_pci_dev(edev);
+ dev = dev->bus->self;
+ } else {
+ /*
+ * If it's bus PE, the parent PCI bus is already there
+ * and just pick it up.
+ */
+ dev = pe->bus->self;
+ }
+
+ /*
+ * Do reset based on the fact that the direct upstream bridge
+ * is root bridge (port) or not.
+ */
+ if (dev->bus->number == 0)
+ ret = ioda_eeh_root_reset(hose, option);
+ else
+ ret = ioda_eeh_bridge_reset(hose, dev, option);
+ }
+
+ return ret;
+}
+
+/**
+ * ioda_eeh_get_log - Retrieve error log
+ * @pe: EEH PE
+ * @severity: Severity level of the log
+ * @drv_log: buffer to store the log
+ * @len: space of the log buffer
+ *
+ * The function is used to retrieve error log from P7IOC.
+ */
+static int ioda_eeh_get_log(struct eeh_pe *pe, int severity,
+ char *drv_log, unsigned long len)
+{
+ s64 ret;
+ unsigned long flags;
+ struct pci_controller *hose = pe->phb;
+ struct pnv_phb *phb = hose->private_data;
+
+ spin_lock_irqsave(&phb->lock, flags);
+
+ ret = opal_pci_get_phb_diag_data2(phb->opal_id,
+ phb->diag.blob, PNV_PCI_DIAG_BUF_SIZE);
+ if (ret) {
+ spin_unlock_irqrestore(&phb->lock, flags);
+ pr_warning("%s: Failed to get log for PHB#%x-PE#%x\n",
+ __func__, hose->global_number, pe->addr);
+ return -EIO;
+ }
+
+ /*
+ * FIXME: We probably need log the error in somewhere.
+ * Lets make it up in future.
+ */
+ /* pr_info("%s", phb->diag.blob); */
+
+ spin_unlock_irqrestore(&phb->lock, flags);
+
+ return 0;
+}
+
+/**
+ * ioda_eeh_configure_bridge - Configure the PCI bridges for the indicated PE
+ * @pe: EEH PE
+ *
+ * For particular PE, it might have included PCI bridges. In order
+ * to make the PE work properly, those PCI bridges should be configured
+ * correctly. However, we need do nothing on P7IOC since the reset
+ * function will do everything that should be covered by the function.
+ */
+static int ioda_eeh_configure_bridge(struct eeh_pe *pe)
+{
+ return 0;
+}
+
+static void ioda_eeh_hub_diag_common(struct OpalIoP7IOCErrorData *data)
+{
+ /* GEM */
+ pr_info(" GEM XFIR: %016llx\n", data->gemXfir);
+ pr_info(" GEM RFIR: %016llx\n", data->gemRfir);
+ pr_info(" GEM RIRQFIR: %016llx\n", data->gemRirqfir);
+ pr_info(" GEM Mask: %016llx\n", data->gemMask);
+ pr_info(" GEM RWOF: %016llx\n", data->gemRwof);
+
+ /* LEM */
+ pr_info(" LEM FIR: %016llx\n", data->lemFir);
+ pr_info(" LEM Error Mask: %016llx\n", data->lemErrMask);
+ pr_info(" LEM Action 0: %016llx\n", data->lemAction0);
+ pr_info(" LEM Action 1: %016llx\n", data->lemAction1);
+ pr_info(" LEM WOF: %016llx\n", data->lemWof);
+}
+
+static void ioda_eeh_hub_diag(struct pci_controller *hose)
+{
+ struct pnv_phb *phb = hose->private_data;
+ struct OpalIoP7IOCErrorData *data;
+ long rc;
+
+ data = (struct OpalIoP7IOCErrorData *)ioda_eeh_hub_diag;
+ rc = opal_pci_get_hub_diag_data(phb->hub_id, data, PAGE_SIZE);
+ if (rc != OPAL_SUCCESS) {
+ pr_warning("%s: Failed to get HUB#%llx diag-data (%ld)\n",
+ __func__, phb->hub_id, rc);
+ return;
+ }
+
+ switch (data->type) {
+ case OPAL_P7IOC_DIAG_TYPE_RGC:
+ pr_info("P7IOC diag-data for RGC\n\n");
+ ioda_eeh_hub_diag_common(data);
+ pr_info(" RGC Status: %016llx\n", data->rgc.rgcStatus);
+ pr_info(" RGC LDCP: %016llx\n", data->rgc.rgcLdcp);
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_BI:
+ pr_info("P7IOC diag-data for BI %s\n\n",
+ data->bi.biDownbound ? "Downbound" : "Upbound");
+ ioda_eeh_hub_diag_common(data);
+ pr_info(" BI LDCP 0: %016llx\n", data->bi.biLdcp0);
+ pr_info(" BI LDCP 1: %016llx\n", data->bi.biLdcp1);
+ pr_info(" BI LDCP 2: %016llx\n", data->bi.biLdcp2);
+ pr_info(" BI Fence Status: %016llx\n", data->bi.biFenceStatus);
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_CI:
+ pr_info("P7IOC diag-data for CI Port %d\\nn",
+ data->ci.ciPort);
+ ioda_eeh_hub_diag_common(data);
+ pr_info(" CI Port Status: %016llx\n", data->ci.ciPortStatus);
+ pr_info(" CI Port LDCP: %016llx\n", data->ci.ciPortLdcp);
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_MISC:
+ pr_info("P7IOC diag-data for MISC\n\n");
+ ioda_eeh_hub_diag_common(data);
+ break;
+ case OPAL_P7IOC_DIAG_TYPE_I2C:
+ pr_info("P7IOC diag-data for I2C\n\n");
+ ioda_eeh_hub_diag_common(data);
+ break;
+ default:
+ pr_warning("%s: Invalid type of HUB#%llx diag-data (%d)\n",
+ __func__, phb->hub_id, data->type);
+ }
+}
+
+static void ioda_eeh_p7ioc_phb_diag(struct pci_controller *hose,
+ struct OpalIoPhbErrorCommon *common)
+{
+ struct OpalIoP7IOCPhbErrorData *data;
+ int i;
+
+ data = (struct OpalIoP7IOCPhbErrorData *)common;
+
+ pr_info("P7IOC PHB#%x Diag-data (Version: %d)\n\n",
+ hose->global_number, common->version);
+
+ pr_info(" brdgCtl: %08x\n", data->brdgCtl);
+
+ pr_info(" portStatusReg: %08x\n", data->portStatusReg);
+ pr_info(" rootCmplxStatus: %08x\n", data->rootCmplxStatus);
+ pr_info(" busAgentStatus: %08x\n", data->busAgentStatus);
+
+ pr_info(" deviceStatus: %08x\n", data->deviceStatus);
+ pr_info(" slotStatus: %08x\n", data->slotStatus);
+ pr_info(" linkStatus: %08x\n", data->linkStatus);
+ pr_info(" devCmdStatus: %08x\n", data->devCmdStatus);
+ pr_info(" devSecStatus: %08x\n", data->devSecStatus);
+
+ pr_info(" rootErrorStatus: %08x\n", data->rootErrorStatus);
+ pr_info(" uncorrErrorStatus: %08x\n", data->uncorrErrorStatus);
+ pr_info(" corrErrorStatus: %08x\n", data->corrErrorStatus);
+ pr_info(" tlpHdr1: %08x\n", data->tlpHdr1);
+ pr_info(" tlpHdr2: %08x\n", data->tlpHdr2);
+ pr_info(" tlpHdr3: %08x\n", data->tlpHdr3);
+ pr_info(" tlpHdr4: %08x\n", data->tlpHdr4);
+ pr_info(" sourceId: %08x\n", data->sourceId);
+
+ pr_info(" errorClass: %016llx\n", data->errorClass);
+ pr_info(" correlator: %016llx\n", data->correlator);
+ pr_info(" p7iocPlssr: %016llx\n", data->p7iocPlssr);
+ pr_info(" p7iocCsr: %016llx\n", data->p7iocCsr);
+ pr_info(" lemFir: %016llx\n", data->lemFir);
+ pr_info(" lemErrorMask: %016llx\n", data->lemErrorMask);
+ pr_info(" lemWOF: %016llx\n", data->lemWOF);
+ pr_info(" phbErrorStatus: %016llx\n", data->phbErrorStatus);
+ pr_info(" phbFirstErrorStatus: %016llx\n", data->phbFirstErrorStatus);
+ pr_info(" phbErrorLog0: %016llx\n", data->phbErrorLog0);
+ pr_info(" phbErrorLog1: %016llx\n", data->phbErrorLog1);
+ pr_info(" mmioErrorStatus: %016llx\n", data->mmioErrorStatus);
+ pr_info(" mmioFirstErrorStatus: %016llx\n", data->mmioFirstErrorStatus);
+ pr_info(" mmioErrorLog0: %016llx\n", data->mmioErrorLog0);
+ pr_info(" mmioErrorLog1: %016llx\n", data->mmioErrorLog1);
+ pr_info(" dma0ErrorStatus: %016llx\n", data->dma0ErrorStatus);
+ pr_info(" dma0FirstErrorStatus: %016llx\n", data->dma0FirstErrorStatus);
+ pr_info(" dma0ErrorLog0: %016llx\n", data->dma0ErrorLog0);
+ pr_info(" dma0ErrorLog1: %016llx\n", data->dma0ErrorLog1);
+ pr_info(" dma1ErrorStatus: %016llx\n", data->dma1ErrorStatus);
+ pr_info(" dma1FirstErrorStatus: %016llx\n", data->dma1FirstErrorStatus);
+ pr_info(" dma1ErrorLog0: %016llx\n", data->dma1ErrorLog0);
+ pr_info(" dma1ErrorLog1: %016llx\n", data->dma1ErrorLog1);
+
+ for (i = 0; i < OPAL_P7IOC_NUM_PEST_REGS; i++) {
+ if ((data->pestA[i] >> 63) == 0 &&
+ (data->pestB[i] >> 63) == 0)
+ continue;
+
+ pr_info(" PE[%3d] PESTA: %016llx\n", i, data->pestA[i]);
+ pr_info(" PESTB: %016llx\n", data->pestB[i]);
+ }
+}
+
+static void ioda_eeh_phb_diag(struct pci_controller *hose)
+{
+ struct pnv_phb *phb = hose->private_data;
+ struct OpalIoPhbErrorCommon *common;
+ long rc;
+
+ common = (struct OpalIoPhbErrorCommon *)phb->diag.blob;
+ rc = opal_pci_get_phb_diag_data2(phb->opal_id, common, PAGE_SIZE);
+ if (rc != OPAL_SUCCESS) {
+ pr_warning("%s: Failed to get diag-data for PHB#%x (%ld)\n",
+ __func__, hose->global_number, rc);
+ return;
+ }
+
+ switch (common->ioType) {
+ case OPAL_PHB_ERROR_DATA_TYPE_P7IOC:
+ ioda_eeh_p7ioc_phb_diag(hose, common);
+ break;
+ default:
+ pr_warning("%s: Unrecognized I/O chip %d\n",
+ __func__, common->ioType);
+ }
+}
+
+static int ioda_eeh_get_phb_pe(struct pci_controller *hose,
+ struct eeh_pe **pe)
+{
+ struct eeh_pe *phb_pe;
+
+ phb_pe = eeh_phb_pe_get(hose);
+ if (!phb_pe) {
+ pr_warning("%s Can't find PE for PHB#%d\n",
+ __func__, hose->global_number);
+ return -EEXIST;
+ }
+
+ *pe = phb_pe;
+ return 0;
+}
+
+static int ioda_eeh_get_pe(struct pci_controller *hose,
+ u16 pe_no, struct eeh_pe **pe)
+{
+ struct eeh_pe *phb_pe, *dev_pe;
+ struct eeh_dev dev;
+
+ /* Find the PHB PE */
+ if (ioda_eeh_get_phb_pe(hose, &phb_pe))
+ return -EEXIST;
+
+ /* Find the PE according to PE# */
+ memset(&dev, 0, sizeof(struct eeh_dev));
+ dev.phb = hose;
+ dev.pe_config_addr = pe_no;
+ dev_pe = eeh_pe_get(&dev);
+ if (!dev_pe) {
+ pr_warning("%s: Can't find PE for PHB#%x - PE#%x\n",
+ __func__, hose->global_number, pe_no);
+ return -EEXIST;
+ }
+
+ *pe = dev_pe;
+ return 0;
+}
+
+/**
+ * ioda_eeh_next_error - Retrieve next error for EEH core to handle
+ * @pe: The affected PE
+ *
+ * The function is expected to be called by EEH core while it gets
+ * special EEH event (without binding PE). The function calls to
+ * OPAL APIs for next error to handle. The informational error is
+ * handled internally by platform. However, the dead IOC, dead PHB,
+ * fenced PHB and frozen PE should be handled by EEH core eventually.
+ */
+static int ioda_eeh_next_error(struct eeh_pe **pe)
+{
+ struct pci_controller *hose, *tmp;
+ struct pnv_phb *phb;
+ u64 frozen_pe_no;
+ u16 err_type, severity;
+ long rc;
+ int ret = 1;
+
+ /*
+ * While running here, it's safe to purge the event queue.
+ * And we should keep the cached OPAL notifier event sychronized
+ * between the kernel and firmware.
+ */
+ eeh_remove_event(NULL);
+ opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
+
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ /*
+ * If the subordinate PCI buses of the PHB has been
+ * removed, we needn't take care of it any more.
+ */
+ phb = hose->private_data;
+ if (phb->eeh_state & PNV_EEH_STATE_REMOVED)
+ continue;
+
+ rc = opal_pci_next_error(phb->opal_id,
+ &frozen_pe_no, &err_type, &severity);
+
+ /* If OPAL API returns error, we needn't proceed */
+ if (rc != OPAL_SUCCESS) {
+ IODA_EEH_DBG("%s: Invalid return value on "
+ "PHB#%x (0x%lx) from opal_pci_next_error",
+ __func__, hose->global_number, rc);
+ continue;
+ }
+
+ /* If the PHB doesn't have error, stop processing */
+ if (err_type == OPAL_EEH_NO_ERROR ||
+ severity == OPAL_EEH_SEV_NO_ERROR) {
+ IODA_EEH_DBG("%s: No error found on PHB#%x\n",
+ __func__, hose->global_number);
+ continue;
+ }
+
+ /*
+ * Processing the error. We're expecting the error with
+ * highest priority reported upon multiple errors on the
+ * specific PHB.
+ */
+ IODA_EEH_DBG("%s: Error (%d, %d, %d) on PHB#%x\n",
+ err_type, severity, pe_no, hose->global_number);
+ switch (err_type) {
+ case OPAL_EEH_IOC_ERROR:
+ if (severity == OPAL_EEH_SEV_IOC_DEAD) {
+ list_for_each_entry_safe(hose, tmp,
+ &hose_list, list_node) {
+ phb = hose->private_data;
+ phb->eeh_state |= PNV_EEH_STATE_REMOVED;
+ }
+
+ pr_err("EEH: dead IOC detected\n");
+ ret = 4;
+ goto out;
+ } else if (severity == OPAL_EEH_SEV_INF) {
+ pr_info("EEH: IOC informative error "
+ "detected\n");
+ ioda_eeh_hub_diag(hose);
+ }
+
+ break;
+ case OPAL_EEH_PHB_ERROR:
+ if (severity == OPAL_EEH_SEV_PHB_DEAD) {
+ if (ioda_eeh_get_phb_pe(hose, pe))
+ break;
+
+ pr_err("EEH: dead PHB#%x detected\n",
+ hose->global_number);
+ phb->eeh_state |= PNV_EEH_STATE_REMOVED;
+ ret = 3;
+ goto out;
+ } else if (severity == OPAL_EEH_SEV_PHB_FENCED) {
+ if (ioda_eeh_get_phb_pe(hose, pe))
+ break;
+
+ pr_err("EEH: fenced PHB#%x detected\n",
+ hose->global_number);
+ ret = 2;
+ goto out;
+ } else if (severity == OPAL_EEH_SEV_INF) {
+ pr_info("EEH: PHB#%x informative error "
+ "detected\n",
+ hose->global_number);
+ ioda_eeh_phb_diag(hose);
+ }
+
+ break;
+ case OPAL_EEH_PE_ERROR:
+ if (ioda_eeh_get_pe(hose, frozen_pe_no, pe))
+ break;
+
+ pr_err("EEH: Frozen PE#%x on PHB#%x detected\n",
+ (*pe)->addr, (*pe)->phb->global_number);
+ ret = 1;
+ goto out;
+ }
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+struct pnv_eeh_ops ioda_eeh_ops = {
+ .post_init = ioda_eeh_post_init,
+ .set_option = ioda_eeh_set_option,
+ .get_state = ioda_eeh_get_state,
+ .reset = ioda_eeh_reset,
+ .get_log = ioda_eeh_get_log,
+ .configure_bridge = ioda_eeh_configure_bridge,
+ .next_error = ioda_eeh_next_error
+};
OpenPOWER on IntegriCloud