1 files changed, 100 insertions, 22 deletions

diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index 89ee02c..3c732ac 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -208,6 +208,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 	u8 __iomem *lbc_lcs0_ba = NULL;
 	u8 __iomem *lbc_lcs1_ba = NULL;
 	phys_addr_t cs0_addr, cs1_addr;
+	u32 br0, or0, br1, or1;
 	const __be32 *iprop;
 	unsigned int num_laws;
 	u8 b;
@@ -256,11 +257,70 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
 	}
 	num_laws = be32_to_cpup(iprop);
 
-	cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
-	cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
+	/*
+	 * Indirect mode requires both BR0 and BR1 to be set to "GPCM",
+	 * otherwise writes to these addresses won't actually appear on the
+	 * local bus, and so the PIXIS won't see them.
+	 *
+	 * In FCM mode, writes go to the NAND controller, which does not pass
+	 * them to the localbus directly.  So we force BR0 and BR1 into GPCM
+	 * mode, since we don't care about what's behind the localbus any
+	 * more.
+	 */
+	br0 = in_be32(&lbc->bank[0].br);
+	br1 = in_be32(&lbc->bank[1].br);
+	or0 = in_be32(&lbc->bank[0].or);
+	or1 = in_be32(&lbc->bank[1].or);
+
+	/* Make sure CS0 and CS1 are programmed */
+	if (!(br0 & BR_V) || !(br1 & BR_V)) {
+		pr_err("p1022ds: CS0 and/or CS1 is not programmed\n");
+		goto exit;
+	}
+
+	/*
+	 * Use the existing BRx/ORx values if it's already GPCM. Otherwise,
+	 * force the values to simple 32KB GPCM windows with the most
+	 * conservative timing.
+	 */
+	if ((br0 & BR_MSEL) != BR_MS_GPCM) {
+		br0 = (br0 & BR_BA) | BR_V;
+		or0 = 0xFFFF8000 | 0xFF7;
+		out_be32(&lbc->bank[0].br, br0);
+		out_be32(&lbc->bank[0].or, or0);
+	}
+	if ((br1 & BR_MSEL) != BR_MS_GPCM) {
+		br1 = (br1 & BR_BA) | BR_V;
+		or1 = 0xFFFF8000 | 0xFF7;
+		out_be32(&lbc->bank[1].br, br1);
+		out_be32(&lbc->bank[1].or, or1);
+	}
+
+	cs0_addr = lbc_br_to_phys(ecm, num_laws, br0);
+	if (!cs0_addr) {
+		pr_err("p1022ds: could not determine physical address for CS0"
+		       " (BR0=%08x)\n", br0);
+		goto exit;
+	}
+	cs1_addr = lbc_br_to_phys(ecm, num_laws, br1);
+	if (!cs0_addr) {
+		pr_err("p1022ds: could not determine physical address for CS1"
+		       " (BR1=%08x)\n", br1);
+		goto exit;
+	}
 
 	lbc_lcs0_ba = ioremap(cs0_addr, 1);
+	if (!lbc_lcs0_ba) {
+		pr_err("p1022ds: could not ioremap CS0 address %llx\n",
+		       (unsigned long long)cs0_addr);
+		goto exit;
+	}
 	lbc_lcs1_ba = ioremap(cs1_addr, 1);
+	if (!lbc_lcs1_ba) {
+		pr_err("p1022ds: could not ioremap CS1 address %llx\n",
+		       (unsigned long long)cs1_addr);
+		goto exit;
+	}
 
 	/* Make sure we're in indirect mode first. */
 	if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
@@ -419,18 +479,6 @@ void __init p1022_ds_pic_init(void)
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
-/*
- * Disables a node in the device tree.
- *
- * This function is called before kmalloc() is available, so the 'new' object
- * should be allocated in the global area.  The easiest way is to do that is
- * to allocate one static local variable for each call to this function.
- */
-static void __init disable_one_node(struct device_node *np, struct property *new)
-{
-	prom_update_property(np, new);
-}
-
 /* TRUE if there is a "video=fslfb" command-line parameter. */
 static bool fslfb;
 
@@ -493,28 +541,58 @@ static void __init p1022_ds_setup_arch(void)
 	diu_ops.valid_monitor_port	= p1022ds_valid_monitor_port;
 
 	/*
-	 * Disable the NOR flash node if there is video=fslfb... command-line
-	 * parameter.  When the DIU is active, NOR flash is unavailable, so we
-	 * have to disable the node before the MTD driver loads.
+	 * Disable the NOR and NAND flash nodes if there is video=fslfb...
+	 * command-line parameter.  When the DIU is active, the localbus is
+	 * unavailable, so we have to disable these nodes before the MTD
+	 * driver loads.
 	 */
 	if (fslfb) {
 		struct device_node *np =
 			of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
 
 		if (np) {
-			np = of_find_compatible_node(np, NULL, "cfi-flash");
-			if (np) {
+			struct device_node *np2;
+
+			of_node_get(np);
+			np2 = of_find_compatible_node(np, NULL, "cfi-flash");
+			if (np2) {
 				static struct property nor_status = {
 					.name = "status",
 					.value = "disabled",
 					.length = sizeof("disabled"),
 				};
 
+				/*
+				 * prom_update_property() is called before
+				 * kmalloc() is available, so the 'new' object
+				 * should be allocated in the global area.
+				 * The easiest way is to do that is to
+				 * allocate one static local variable for each
+				 * call to this function.
+				 */
 				pr_info("p1022ds: disabling %s node",
-					np->full_name);
-				disable_one_node(np, &nor_status);
-				of_node_put(np);
+					np2->full_name);
+				prom_update_property(np2, &nor_status);
+				of_node_put(np2);
 			}
+
+			of_node_get(np);
+			np2 = of_find_compatible_node(np, NULL,
+						      "fsl,elbc-fcm-nand");
+			if (np2) {
+				static struct property nand_status = {
+					.name = "status",
+					.value = "disabled",
+					.length = sizeof("disabled"),
+				};
+
+				pr_info("p1022ds: disabling %s node",
+					np2->full_name);
+				prom_update_property(np2, &nand_status);
+				of_node_put(np2);
+			}
+
+			of_node_put(np);
 		}
 
 	}