1 files changed, 167 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c
new file mode 100644
index 0000000..aa46e9d
--- /dev/null
+++ b/arch/powerpc/platforms/44x/iss4xx.c
@@ -0,0 +1,167 @@
+/*
+ * PPC476 board specific routines
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+static __initdata struct of_device_id iss4xx_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init iss4xx_device_probe(void)
+{
+	of_platform_bus_probe(NULL, iss4xx_of_bus, NULL);
+	of_instantiate_rtc();
+
+	return 0;
+}
+machine_device_initcall(iss4xx, iss4xx_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init iss4xx_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "ibm,uic")) {
+		uic_init_tree();
+		ppc_md.get_irq = uic_get_irq;
+#ifdef CONFIG_MPIC
+	} else if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+					       " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+#endif
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr",
+					       NULL);
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
+		return;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+}
+
+static struct smp_ops_t iss_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_iss4xx_setup_cpu,
+	.kick_cpu	= smp_iss4xx_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init iss4xx_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &iss_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init iss4xx_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init iss4xx_setup_arch(void)
+{
+	iss4xx_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init iss4xx_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(iss4xx) {
+	.name			= "ISS-4xx",
+	.probe			= iss4xx_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= iss4xx_init_irq,
+	.setup_arch		= iss4xx_setup_arch,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};