summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/setup_64.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/setup_64.c')
-rw-r--r--arch/powerpc/kernel/setup_64.c199
1 files changed, 50 insertions, 149 deletions
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 40c4810..b099405 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -56,7 +56,7 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/lmb.h>
-#include <asm/iSeries/ItLpNaca.h>
+#include <asm/iseries/it_lp_naca.h>
#include <asm/firmware.h>
#include <asm/systemcfg.h>
#include <asm/xmon.h>
@@ -103,8 +103,6 @@ extern void htab_initialize(void);
extern void early_init_devtree(void *flat_dt);
extern void unflatten_device_tree(void);
-extern void smp_release_cpus(void);
-
int have_of = 1;
int boot_cpuid = 0;
int boot_cpuid_phys = 0;
@@ -183,120 +181,14 @@ static int __init early_smt_enabled(char *p)
}
early_param("smt-enabled", early_smt_enabled);
-/**
- * setup_cpu_maps - initialize the following cpu maps:
- * cpu_possible_map
- * cpu_present_map
- * cpu_sibling_map
- *
- * Having the possible map set up early allows us to restrict allocations
- * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
- *
- * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
- *
- * This function is valid only for Open Firmware systems. finish_device_tree
- * must be called before using this.
- *
- * While we're here, we may as well set the "physical" cpu ids in the paca.
- */
-static void __init setup_cpu_maps(void)
-{
- struct device_node *dn = NULL;
- int cpu = 0;
- int swap_cpuid = 0;
-
- check_smt_enabled();
-
- while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
- u32 *intserv;
- int j, len = sizeof(u32), nthreads;
-
- intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s",
- &len);
- if (!intserv)
- intserv = (u32 *)get_property(dn, "reg", NULL);
-
- nthreads = len / sizeof(u32);
-
- for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
- cpu_set(cpu, cpu_present_map);
- set_hard_smp_processor_id(cpu, intserv[j]);
-
- if (intserv[j] == boot_cpuid_phys)
- swap_cpuid = cpu;
- cpu_set(cpu, cpu_possible_map);
- cpu++;
- }
- }
-
- /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that
- * boot cpu is logical 0.
- */
- if (boot_cpuid_phys != get_hard_smp_processor_id(0)) {
- u32 tmp;
- tmp = get_hard_smp_processor_id(0);
- set_hard_smp_processor_id(0, boot_cpuid_phys);
- set_hard_smp_processor_id(swap_cpuid, tmp);
- }
-
- /*
- * On pSeries LPAR, we need to know how many cpus
- * could possibly be added to this partition.
- */
- if (systemcfg->platform == PLATFORM_PSERIES_LPAR &&
- (dn = of_find_node_by_path("/rtas"))) {
- int num_addr_cell, num_size_cell, maxcpus;
- unsigned int *ireg;
-
- num_addr_cell = prom_n_addr_cells(dn);
- num_size_cell = prom_n_size_cells(dn);
-
- ireg = (unsigned int *)
- get_property(dn, "ibm,lrdr-capacity", NULL);
-
- if (!ireg)
- goto out;
-
- maxcpus = ireg[num_addr_cell + num_size_cell];
-
- /* Double maxcpus for processors which have SMT capability */
- if (cpu_has_feature(CPU_FTR_SMT))
- maxcpus *= 2;
-
- if (maxcpus > NR_CPUS) {
- printk(KERN_WARNING
- "Partition configured for %d cpus, "
- "operating system maximum is %d.\n",
- maxcpus, NR_CPUS);
- maxcpus = NR_CPUS;
- } else
- printk(KERN_INFO "Partition configured for %d cpus.\n",
- maxcpus);
-
- for (cpu = 0; cpu < maxcpus; cpu++)
- cpu_set(cpu, cpu_possible_map);
- out:
- of_node_put(dn);
- }
-
- /*
- * Do the sibling map; assume only two threads per processor.
- */
- for_each_cpu(cpu) {
- cpu_set(cpu, cpu_sibling_map[cpu]);
- if (cpu_has_feature(CPU_FTR_SMT))
- cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
- }
-
- systemcfg->processorCount = num_present_cpus();
-}
+#else
+#define check_smt_enabled()
#endif /* CONFIG_SMP */
extern struct machdep_calls pSeries_md;
extern struct machdep_calls pmac_md;
extern struct machdep_calls maple_md;
-extern struct machdep_calls bpa_md;
+extern struct machdep_calls cell_md;
extern struct machdep_calls iseries_md;
/* Ultimately, stuff them in an elf section like initcalls... */
@@ -310,8 +202,8 @@ static struct machdep_calls __initdata *machines[] = {
#ifdef CONFIG_PPC_MAPLE
&maple_md,
#endif /* CONFIG_PPC_MAPLE */
-#ifdef CONFIG_PPC_BPA
- &bpa_md,
+#ifdef CONFIG_PPC_CELL
+ &cell_md,
#endif
#ifdef CONFIG_PPC_ISERIES
&iseries_md,
@@ -385,21 +277,49 @@ void __init early_setup(unsigned long dt_ptr)
DBG("Found, Initializing memory management...\n");
/*
- * Initialize stab / SLB management
+ * Initialize the MMU Hash table and create the linear mapping
+ * of memory. Has to be done before stab/slb initialization as
+ * this is currently where the page size encoding is obtained
*/
- if (!firmware_has_feature(FW_FEATURE_ISERIES))
- stab_initialize(lpaca->stab_real);
+ htab_initialize();
/*
- * Initialize the MMU Hash table and create the linear mapping
- * of memory
+ * Initialize stab / SLB management except on iSeries
*/
- htab_initialize();
+ if (!firmware_has_feature(FW_FEATURE_ISERIES)) {
+ if (cpu_has_feature(CPU_FTR_SLB))
+ slb_initialize();
+ else
+ stab_initialize(lpaca->stab_real);
+ }
DBG(" <- early_setup()\n");
}
+#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
+void smp_release_cpus(void)
+{
+ extern unsigned long __secondary_hold_spinloop;
+
+ DBG(" -> smp_release_cpus()\n");
+
+ /* All secondary cpus are spinning on a common spinloop, release them
+ * all now so they can start to spin on their individual paca
+ * spinloops. For non SMP kernels, the secondary cpus never get out
+ * of the common spinloop.
+ * This is useless but harmless on iSeries, secondaries are already
+ * waiting on their paca spinloops. */
+
+ __secondary_hold_spinloop = 1;
+ mb();
+
+ DBG(" <- smp_release_cpus()\n");
+}
+#else
+#define smp_release_cpus()
+#endif /* CONFIG_SMP || CONFIG_KEXEC */
+
/*
* Initialize some remaining members of the ppc64_caches and systemcfg structures
* (at least until we get rid of them completely). This is mostly some
@@ -589,17 +509,13 @@ void __init setup_system(void)
parse_early_param();
-#ifdef CONFIG_SMP
- /*
- * iSeries has already initialized the cpu maps at this point.
- */
- setup_cpu_maps();
+ check_smt_enabled();
+ smp_setup_cpu_maps();
/* Release secondary cpus out of their spinloops at 0x60 now that
* we can map physical -> logical CPU ids
*/
smp_release_cpus();
-#endif
printk("Starting Linux PPC64 %s\n", system_utsname.version);
@@ -631,23 +547,6 @@ static int ppc64_panic_event(struct notifier_block *this,
return NOTIFY_DONE;
}
-#ifdef CONFIG_PPC_ISERIES
-/*
- * On iSeries we just parse the mem=X option from the command line.
- * On pSeries it's a bit more complicated, see prom_init_mem()
- */
-static int __init early_parsemem(char *p)
-{
- if (!p)
- return 0;
-
- memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE);
-
- return 0;
-}
-early_param("mem", early_parsemem);
-#endif /* CONFIG_PPC_ISERIES */
-
#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
@@ -658,10 +557,12 @@ static void __init irqstack_early_init(void)
* SLB misses on them.
*/
for_each_cpu(i) {
- softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
- THREAD_SIZE, 0x10000000));
- hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE,
- THREAD_SIZE, 0x10000000));
+ softirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc_base(THREAD_SIZE,
+ THREAD_SIZE, 0x10000000));
+ hardirq_ctx[i] = (struct thread_info *)
+ __va(lmb_alloc_base(THREAD_SIZE,
+ THREAD_SIZE, 0x10000000));
}
}
#else
@@ -689,8 +590,8 @@ static void __init emergency_stack_init(void)
limit = min(0x10000000UL, lmb.rmo_size);
for_each_cpu(i)
- paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128,
- limit)) + PAGE_SIZE;
+ paca[i].emergency_sp =
+ __va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
}
/*
OpenPOWER on IntegriCloud